APRISAXE-TC-4RF

File: APRISAXE-TC-4RF.mib (49464 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	SNMPv2-CONF
MIB-4RF

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	OBJECT-IDENTITY
NOTIFICATION-TYPE	Integer32	Unsigned32
Counter32	IpAddress	TEXTUAL-CONVENTION
DisplayString	MODULE-COMPLIANCE	OBJECT-GROUP
NOTIFICATION-GROUP	fourRFModules

Defined Types

AprisaXESlotNumber
Represents a slot number in the AprisaXE, the slots include the modem, transmitter and receiver as well as the MUX cards. H/W Slot Card Slot Name 0 Aux/Modem Aux 1 MUX Card H 2 MUX Card G 3 MUX Card F 4 MUX Card E 5 MUX Card D 6 MUX Card C 7 MUX Card B 8 MUX Card A 9 Transmitter Transmitter 10 Receiver Receiver Slots may or may not be populated.
TEXTUAL-CONVENTION
	INTEGER	rxSlot(0), txSlot(1), slotA(2), slotB(3), slotC(4), slotD(5), slotE(6), slotF(7), slotG(8), slotH(9), auxSlot(10), noSlot(255)

AprisaXEHardwareVersion
Represents a single byte hardware version number.
TEXTUAL-CONVENTION
	INTEGER	0..255

AprisaXECardType
This is used to identify the type of MUX card in a slot. The values for the enumerations match the hardware type values returned from the MUX card FPGAs and EEPROMs.
TEXTUAL-CONVENTION
	INTEGER	none(0), motherboard(E0), transmitterCard(E3), receiverCard(E4), quadJETCard(E5), quadFourWireCard(E7), dualFXOCard(E8), dualFXSCard(E9), modemCard(EA), quadV24Card(EB), hssCard(EC), pscCard(ED), picCard(EE), dualJETCard(D5), singleJETCard(C5)

AprisaXEAlarmSource
This is used to identify the source of an alarm.
TEXTUAL-CONVENTION
	INTEGER	none(0), modem(1), transmitter(2), receiver(3), quadJET(4), quadFourWire(5), dualFxo(6), dualFxs(7), quadV24(8), highSpeedSync(9), psc(10), pic(11), dualJET(12), singleJET(13), external1(50), external2(51), remote(60), user1(70), user2(71), system(100), swUpgrade(101)

AprisaXEPortNumber
This is used to identify a port e.g. reporting an alarm. Not all alarms are associated with a port, in these cases noPort will be used.
TEXTUAL-CONVENTION
	INTEGER	noPort(0), portOne(1), portTwo(2), portThree(3), portFour(4)

AprisaXEAlarmOutput
This is used to map alarm to external outputs.
TEXTUAL-CONVENTION
	INTEGER	none(0), externalOutput1(1), externalOutput2(2), externalOutput3(3), externalOutput4(4)

AprisaXEAlarmMapping
This is used to map alarm to external outputs.
TEXTUAL-CONVENTION
	INTEGER	none(0), localMajor(1), localMinor(2), remoteMajor(3), remoteMinor(4), remoteInput1(5), remoteInput2(6)

AprisaXEAlarmPolarity
This is used to indicate the polarity indicating an alarm present on the external outputs.
TEXTUAL-CONVENTION
	INTEGER	polarityLow(0), polarityHigh(1)

AprisaXEAdcVoltage
A voltage read from an ADC, in millivolts.
TEXTUAL-CONVENTION
	Integer32

AprisaXEDbValue
A value displayed in dB's.
TEXTUAL-CONVENTION
	Integer32

AprisaXEIQData
A sequence of IQ data pairs, each individual value is 16 bit thus a single IQ pair is 32 bits.
TEXTUAL-CONVENTION
	OCTET STRING	Size(0..200)

AprisaXEAlarmType
The type of an alarm.
TEXTUAL-CONVENTION
	INTEGER	none(0), txADCChZeroHi(1), txADCChZeroLo(2), txADCChOneHi(3), txADCChOneLo(4), txADCChTwoHi(5), txADCChTwoLo(6), txADCChThreeHi(7), txADCChThreeLo(8), txADCChFourHi(9), txADCChFourLo(10), txADCChFiveHi(11), txADCChFiveLo(12), txADCChSixHi(13), txADCChSixLo(14), txADCChSevenHi(15), txADCChSevenLo(16), txADCChEightHi(17), txADCChEightLo(18), txADCChNineHi(19), txADCCNineLo(20), txADCChTenHi(21), txADCChTenLo(22), txADCChElevenHi(23), txADCChElevenLo(24), txSynthLD(25), tx5VFail(26), tx11VFail(27), tx28VFail(28), txEEFail(29), txTSensorFail(30), txReturnLoss(31), txAmplifierBalance(32), txMibFail(33), rxADCChZeroHi(50), rxADCChZeroLo(51), rxADCChOneHi(52), rxADCChOneLo(53), rxADCChTwoHi(54), rxADCChTwoLo(55), rxADCChThreeHi(56), rxADCChThreeLo(57), rxADCChFourHi(58), rxADCChFourLo(59), rxADCChFiveHi(60), rxADCChFiveLo(61), rxADCChSixHi(62), rxADCChSixLo(63), rxADCChSevenHi(64), rxADCChSevenLo(65), rxADCChEightHi(66), rxADCChEightLo(67), rxADCChNineHi(68), rxADCCNineLo(69), rxADCChTenHi(70), rxADCChTenLo(71), rxRSSIHi(72), rxRSSILo(73), rx12VFail(74), rxSynthLD(75), rxEEFail(76), rxOff(77), rxMibFail(78), mdLOS(100), mdLink(101), mdStatus(102), mdDemodAlignmentLost(103), mdTdmAlignmentLost(104), mdRefAFail(105), mdRefBFail(106), mdClkSyncFail(107), mdNetClkConfig(108), mdUCEPresent(109), mdInitFail(110), mdEEFail(120), muxId(150), muxInit(151), muxStat(152), muxClk(153), muxMibEEFail(154), muxCharEEFail(155), e1LOF(200), e1AIS(201), e1RAI(202), e1RMAI(203), e1TS16AIS(204), e1TS16LOS(205), e1LOS(206), e1CRC4(207), t1LOF(220), t1AIS(221), t1RAI(222), t1LOS(226), t1CRC6(227), mbHwHsc(250), mbFan1Fail(251), mbFan2Fail(252), mbInvalidConfig(253), mbCardMismatch(254), mbEEFail(255), ccDataFail(300), ccNoBandwidth(301), mhsbSwitchToStandby(325), externalAlarm1(350), externalAlarm2(351), externalOutputAlarm1(352), externalOutputAlarm2(353), externalOutputAlarm3(354), externalOutputAlarm4(355), remoteMajorAlarm(400), remoteMinorAlarm(401), fxoCodecOvld(402), fxoBillToneOvld(403), fxoUnplug(404), fxoCurrentOvld(405), fxsCalibError(406), fxsDCDCError(407), fxsCASLock(408), hssTdmLock(500), hss32MhzReset(501), hssTdmReset(502), hssLoss(503), hssRxFifoFull(504), hssRxFifoEmpty(505), hssTxFifoFull(506), hssTxFifoEmpty(507), hssRxClockInvalid(508), hssTxClockInvalid(509), v24CtrlLineLoss(525), altImageTableUsed(550), defaultImageTableUsed(551), uploadFail(552), pscDemuxAlignmentLost(575), pscTDMAlignmentLost(576), pscMuxAlignmentError(577), pscCompanionTxFail(578), pscSoftwareOverride(579), pscInvalidSwitchValue(580), hsdParamMismatch(600), hsdCompanionLost(601), hsdPMTxFreq(602), hsdPMRxFreq(603), hsdPMTermModState(604), hsdPMTermRfChWidth(605), hsdPMTxPower(606), hsdPMModemIntlvEna(607), lastAlarm(608)

AprisaXEChannelControlType
This is used to set the control the channels, enabling and disabling E1/T1 ports.
TEXTUAL-CONVENTION
	INTEGER	off(0), on(1)

AprisaXETdmPortType
This is used to set the port out to the TDM bus.
TEXTUAL-CONVENTION
	INTEGER	tdmAo(0), tdmBo(1), tdmCo(2), tdmDo(3), tdmAi(4), tdmBi(5), tdmCi(6), tdmDi(7)

AprisaXETdmBus
This is used to set the TDM bus to use.
TEXTUAL-CONVENTION
	INTEGER	tdmBusA(0), tdmBusB(1), tdmBusC(2), tdmBusD(3)

AprisaXEQuadJetTrafficType
This is used to set the traffic rate for the Quad JET card.
TEXTUAL-CONVENTION
	INTEGER	e1Traffic(0), t1Traffic(1), j1Traffic(2)

AprisaXEQuadJetLineEncoding
This is used to set the line encoding for the Quad JET card the default is HDB3 for E1 and B8ZS for T1.
TEXTUAL-CONVENTION
	INTEGER	defaultLineEncoding(0), hDB3LineEncoding(2), b8ZSLineEncoding(4), amiLineEncoding(1)

AprisaXEQuadJetWaveFormShapers
This is used to set the T1 Tx Waveform Shaper for a port; The default value is 0~133 ft.
TEXTUAL-CONVENTION
	INTEGER	wfs0To133Ft(2), wfs133To266Ft(3), wfs266To399Ft(4), wfs399To533Ft(5), wfs533To655Ft(6)

AprisaXEQuadJetMultiframeEnable
This is used to enable/disable support for transport of T1 SF and ESF multiframe sync for a port.
TEXTUAL-CONVENTION
	INTEGER	t1MFOff(0), t1MFOn(1)

AprisaXEDataStatus
This indicates the state of receiver, transmitter or MUX card MIB orcharacterisation data.
TEXTUAL-CONVENTION
	INTEGER	invalid(0), valid(1)

AprisaXEAdpcmCompression
This defines the Compression available on ADPCM.
TEXTUAL-CONVENTION
	INTEGER	kbits16(0), kbits24(1), kbits32(2), kbits64(3), kbits0(4)

AprisaXESignalState
This indicates the state of CAS signalling.
TEXTUAL-CONVENTION
	INTEGER	normal(0), invert(1)

AprisaXEPcmLaw
Type of PCM encoding available.
TEXTUAL-CONVENTION
	INTEGER	alaw(0), ulaw(1)

AprisaXE4WRxGain
The gain in half dB steps for 4wire mux cards.
TEXTUAL-CONVENTION
	INTEGER	dbpos40(0), dbpos35(1), dbpos30(2), dbpos25(3), dbpos20(4), dbpos15(5), dbpos10(6), dbpos05(7), dbpos0(8), dbneg05(9), dbneg10(10), dbneg15(11), dbneg20(12), dbneg25(13), dbneg30(14), dbneg35(15), dbneg40(16), dbneg45(17), dbneg50(18), dbneg55(19), dbneg60(20), dbneg65(21), dbneg70(22), dbneg75(23), dbneg80(24), dbneg85(25), dbneg90(26), dbneg95(27), dbneg100(28), dbneg105(29), dbneg110(30), dbneg115(31), dbneg120(32), dbneg125(33), dbneg130(34), dbneg135(35), dbneg140(36)

AprisaXE4WTxGain
The gain in half dB steps for 4wire mux cards.
TEXTUAL-CONVENTION
	INTEGER	pos140(0), pos135(1), pos130(2), pos125(3), pos120(4), pos115(5), pos110(6), pos105(7), pos100(8), pos95(9), pos90(10), pos85(11), pos80(12), pos75(13), pos70(14), pos65(15), pos60(16), pos55(17), pos50(18), pos45(19), pos40(20), pos35(21), pos30(22), pos25(23), pos20(24), pos15(25), pos10(26), pos05(27), pos0(28), neg05(29), neg10(30), neg15(31), neg20(32), neg25(33), neg30(34), neg35(35), neg40(36)

AprisaXE4WInputLevel
The input (A->D) level in half dB steps for the 4wire mux cards.
TEXTUAL-CONVENTION
	INTEGER	q4emadpos40(36), q4emadpos35(35), q4emadpos30(34), q4emadpos25(33), q4emadpos20(32), q4emadpos15(31), q4emadpos10(30), q4emadpos05(29), q4emadpos0(28), q4emadneg05(27), q4emadneg10(26), q4emadneg15(25), q4emadneg20(24), q4emadneg25(23), q4emadneg30(22), q4emadneg35(21), q4emadneg40(20), q4emadneg45(19), q4emadneg50(18), q4emadneg55(17), q4emadneg60(16), q4emadneg65(15), q4emadneg70(14), q4emadneg75(13), q4emadneg80(12), q4emadneg85(11), q4emadneg90(10), q4emadneg95(9), q4emadneg100(8), q4emadneg105(7), q4emadneg110(6), q4emadneg115(5), q4emadneg120(4), q4emadneg125(3), q4emadneg130(2), q4emadneg135(1), q4emadneg140(0)

AprisaXE4WOutputLevel
The output (D->A) level in half dB steps for the 4wire mux cards.
TEXTUAL-CONVENTION
	INTEGER	q4emdapos40(0), q4emdapos35(1), q4emdapos30(2), q4emdapos25(3), q4emdapos20(4), q4emdapos15(5), q4emdapos10(6), q4emdapos05(7), q4emdapos0(8), q4emdaneg05(9), q4emdaneg10(10), q4emdaneg15(11), q4emdaneg20(12), q4emdaneg25(13), q4emdaneg30(14), q4emdaneg35(15), q4emdaneg40(16), q4emdaneg45(17), q4emdaneg50(18), q4emdaneg55(19), q4emdaneg60(20), q4emdaneg65(21), q4emdaneg70(22), q4emdaneg75(23), q4emdaneg80(24), q4emdaneg85(25), q4emdaneg90(26), q4emdaneg95(27), q4emdaneg100(28), q4emdaneg105(29), q4emdaneg110(30), q4emdaneg115(31), q4emdaneg120(32), q4emdaneg125(33), q4emdaneg130(34), q4emdaneg135(35), q4emdaneg140(36)

AprisaXEFXSInputLevel
The output (A->D) level in half dB steps for the DFXS mux cards.
TEXTUAL-CONVENTION
	INTEGER	dfxsadpos20(23), dfxsadpos15(22), dfxsadpos10(21), dfxsadpos05(20), dfxsadpos0(19), dfxsadneg05(18), dfxsadneg10(17), dfxsadneg15(16), dfxsadneg20(15), dfxsadneg25(14), dfxsadneg30(13), dfxsadneg35(12), dfxsadneg40(11), dfxsadneg45(10), dfxsadneg50(9), dfxsadneg55(8), dfxsadneg60(7), dfxsadneg65(6), dfxsadneg70(5), dfxsadneg75(4), dfxsadneg80(3), dfxsadneg85(2), dfxsadneg90(1)

AprisaXEFXSOutputLevel
The output (D->A) level in half dB steps for the DFXS mux cards.
TEXTUAL-CONVENTION
	INTEGER	dfxsdapos25(1), dfxsdapos20(2), dfxsdapos15(3), dfxsdapos10(4), dfxsdapos05(5), dfxsdapos0(6), dfxsdaneg05(7), dfxsdaneg10(8), dfxsdaneg15(9), dfxsdaneg20(10), dfxsdaneg25(11), dfxsdaneg30(12), dfxsdaneg35(13), dfxsdaneg40(14), dfxsdaneg45(15), dfxsdaneg50(16), dfxsdaneg55(17), dfxsdaneg60(18), dfxsdaneg65(19), dfxsdaneg70(20), dfxsdaneg75(21), dfxsdaneg80(22), dfxsdaneg85(23), dfxsdaneg90(24), dfxsdaneg95(25)

AprisaXEFXOInputLevel
The output (A->D) level in half dB steps for the DFXO mux cards.
TEXTUAL-CONVENTION
	INTEGER	dfxoadpos10(22), dfxoadpos05(21), dfxoadpos0(20), dfxoadneg05(19), dfxoadneg10(18), dfxoadneg15(17), dfxoadneg20(16), dfxoadneg25(15), dfxoadneg30(14), dfxoadneg35(13), dfxoadneg40(12), dfxoadneg45(11), dfxoadneg50(10), dfxoadneg55(9), dfxoadneg60(8), dfxoadneg65(7), dfxoadneg70(6), dfxoadneg75(5), dfxoadneg80(4), dfxoadneg85(3), dfxoadneg90(2), dfxoadneg95(1), dfxoadneg100(0)

AprisaXEFXOOutputLevel
The output (D->A) level in half dB steps for the DFXO mux cards.
TEXTUAL-CONVENTION
	INTEGER	dfxodapos10(18), dfxodapos05(19), dfxodapos0(20), dfxodaneg05(21), dfxodaneg10(22), dfxodaneg15(23), dfxodaneg20(24), dfxodaneg25(25), dfxodaneg30(26), dfxodaneg35(27), dfxodaneg40(28), dfxodaneg45(29), dfxodaneg50(30), dfxodaneg55(31), dfxodaneg60(32), dfxodaneg65(33), dfxodaneg70(34), dfxodaneg75(35), dfxodaneg80(36), dfxodaneg85(37), dfxodaneg90(38), dfxodaneg95(39), dfxodaneg100(40)

AprisaXEFXOCountry
The country code for FXO mux cards this will need to be completed later.
TEXTUAL-CONVENTION
	INTEGER	argentina(0), australia(1), austria(2), bahrain(3), belgium(4), brazil(5), bulgaria(6), canada(7), chile(8), china(9), columbia(10), croatia(11), cyprus(12), czechrep(13), denmark(14), ecuador(15), egypt(16), elslavador(17), finland(18), france(19), germany(20), greece(21), guam(22), hongkong(23), hungary(24), iceland(25), india(26), indonesia(27), ireland(28), israel(29), italy(30), japan(31), jordan(32), kazakhstan(33), kuwait(34), latvia(35), lebanon(36), luxembourg(37), macao(38), malaysia(39), malta(40), mexico(41), morocco(42), netherlands(43), newzealand(44), nigeria(45), norway(46), oman(47), pakistan(48), peru(49), philippines(50), poland(51), portugal(52), romania(53), russia(54), saudiarabia(55), singapore(56), slovakia(57), slovenia(58), southafrica(59), southkorea(60), spain(61), sweden(62), switzerland(63), syria(64), taiwan(65), tbr21(66), thailand(67), uae(68), uk(69), usa(70), yemen(71)

AprisaXEFXSPMLevel
Type of SPM level.
TEXTUAL-CONVENTION
	INTEGER	l0(0), l1(1), l2(2), l3(3), l4(4), l5(5), l6(6), l7(7), l8(8), l9(9), l10(10), l11(11), l12(12), l13(13), l14(14), l15(15), l16(16), l17(17), l18(18), l19(19), l20(20), l21(21), l22(22), l23(23), l24(24), l25(25), l26(26), l27(27)

AprisaXEFXSPathMute
The status of the Path Mute function for the DFXS.
TEXTUAL-CONVENTION
	INTEGER	noMute(0), muteRx(16), muteTx(32)

AprisaXETableCommand
A command sent to add or delete table entries.
TEXTUAL-CONVENTION
	INTEGER	noCommand(0), addCommand(1), deleteCommand(2)

AprisaXEQuadJetConnectionType
Indicates whether a connection is for data or CAS signalling.
TEXTUAL-CONVENTION
	INTEGER	dataConnection(0), casConnection(1), tsLoopbackConnection(2)

AprisaXEInterfaceCnxnType
This describes the interface connection type. The values are arbitrary and are primarily used to identify instances of aggregate connections.
TEXTUAL-CONVENTION
	INTEGER	none(0), unframedE1Intf(1), unframedT1Intf(2), aggregateIntf(3), fourWireIntf(4), fxoIntf(5), fxsIntf(6), v24AsyncIntf(7), custEthernetIntf(8), mgmtEthernetIntf(9), syncSerialIntf(10), hssControlIntf(12), dropAndInsertIntf(13)

AprisaXEConnectionID
Represents a unique cross-connection identifier.
TEXTUAL-CONVENTION
	INTEGER	0..65535

AprisaXEPcmMode
The current PCM mode.
TEXTUAL-CONVENTION
	INTEGER	pcm31c(0), pcm30c(1), pcm31(2), pcm30(3), unframed(4), off(5), t1sf(6), t1esf(7), t1sf4(8), t1esf16(10)

AprisaXESerialEquipmentMode
Mode describing the behaviour of the serial interface.
TEXTUAL-CONVENTION
	INTEGER	noCable(0), dceMode(1), dteMode(2)

AprisaXEHssSerialMode
Mode describing the type of serial interface, e.g. V.35.
TEXTUAL-CONVENTION
	INTEGER	v11Mode(0), rs530AMode(1), rs530Mode(2), x21Mode(3), v35Mode(4), rs449v36Mode(5), rs232v28Mode(6), noSerialCable(7)

AprisaXE2WireSignalState
This indicates the state of the CAS signalling bits as normal, inverted and disabled.
TEXTUAL-CONVENTION
	INTEGER	fxTransNormal(0), fxTransInvert(1), fxForcedNormal(2), fxForcedInvert(3)

AprisaXEEthernetPortNumber
Ethernet port numbers.
TEXTUAL-CONVENTION
	INTEGER	eth1(1), eth2(2), eth3(3), eth4(4)

AprisaXEEthernetGroup
Used for Ethernet groupings.
TEXTUAL-CONVENTION
	INTEGER	user1(1), user2(2), user3(3), user4(4), userAndMgmt(5)

AprisaXEEthernetFrameRate
The frame rate limits allowed by the Marvell switch.
TEXTUAL-CONVENTION
	INTEGER	unlimited(0), limit128kbps(1), limit256kbps(2), limit512kbps(3), limit1Mbps(4), limit2Mbps(5), limit4Mbps(6), limit8Mbps(7)

AprisaXEEthernetPortPriority
Indicates the bandwidth allocated to a port.
TEXTUAL-CONVENTION
	INTEGER	fromFrame(0), low(1), medium(3), high(5), vHigh(7)

AprisaXEEthernetGrouping
Indicates whether Ethernet Grouping is enabled or disabled.
TEXTUAL-CONVENTION
	INTEGER	ethGroupDisabled(0), ethGroupEnabled(1)

AprisaXEEthernetPrioQueueScheduling
Indicates the QOS priority scheduling scheme.
TEXTUAL-CONVENTION
	INTEGER	weighted(0), strict(1)

AprisaXEEthernetPrioQueueMapping
Indicates the QOS priority mapping scheme.
TEXTUAL-CONVENTION
	INTEGER	standard(0), cisco(1)

AprisaXEDefaultAction
Indicates whether, or not, MIB values should be defaulted.
TEXTUAL-CONVENTION
	INTEGER	dontSetToDefaults(0), setToDefaults(1)

AprisaXEQuadJetLoopbacks
This indicates the E1 loopback setting on a port; OFF, Line or Radio Facing.
TEXTUAL-CONVENTION
	INTEGER	e1LoopbacksOff(0), e1LineLoopbackOn(1), e1RadioLoopbackOn(2)

AprisaXECCActivationStatus
Indicates the current state of cross connect activation for the port.
TEXTUAL-CONVENTION
	INTEGER	ccActivated(0), ccActivationFailed(1), ccBusyActivating(2)

AprisaXESysSoftwareStatus
Indicates consistency of inventory file and system software.
TEXTUAL-CONVENTION
	INTEGER	sysInventoryConsistent(0), sysInventoryInconsistent(1)

AprisaXEPSCActiveRadio
This indicates the active radio for the PSC card.
TEXTUAL-CONVENTION
	INTEGER	autoSelect(1), manualA(0), manualB(2)

AprisaXEPSCActiveTx
This indicates the active transmitter card.
TEXTUAL-CONVENTION
	INTEGER	txa(0), txb(1)

Defined Values

fourRFAprisaXETCModule		1.3.6.1.4.1.14817.2.6
Textual Conventions for the AprisaXE project
MODULE-IDENTITY

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor