APPLIC-MIB

File: APPLIC-MIB.mib (122808 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
RMON-MIB GEN-MIB

Imported symbols

IpAddress Counter TimeTicks
OBJECT-TYPE DisplayString ifIndex
historyControlIndex lannet

Defined Types

LseGroupEntry  
SEQUENCE    
  lseGroupId INTEGER
  lseGroupFastOpen INTEGER
  lseGroup10MSqlt INTEGER
  lseGroupSmartSqlt INTEGER
  lseGroupCParameter INTEGER
  lseGroupIPGJamLength INTEGER
  lseGroupJamLength INTEGER
  lseGroupDataBlinderLength INTEGER
  lseGroupIPGDataLength INTEGER
  lseGroupActiveMonitor INTEGER
  lseGroupBackbone12 INTEGER
  lseGroupSetDefaults INTEGER
  lseGroupBackbone34 INTEGER
  lseGroupBackboneRedun12 INTEGER
  lseGroupBackoffFromJam INTEGER
  lseGroupCAMClear INTEGER
  lseGroupJamPrevent INTEGER
  lseGroupNormOpCl INTEGER
  lseGroupNormOpDelay INTEGER
  lseGroupAutoPartitionEnable INTEGER
  lseGroupWorkState INTEGER
  lseGroupBITResult INTEGER
  lseGroupAssignSlots OCTET STRING
  lseGroupHSBMonStatus INTEGER
  lseGroupEnableHSBReset INTEGER

LseIntPortEntry  
SEQUENCE    
  lseIntPortGroupId INTEGER
  lseIntPortId INTEGER
  lseIntPortIOMode INTEGER
  lseIntPortResetSwitchCAM INTEGER
  lseIntPortVideoPacket INTEGER
  lseIntPortPriorityStateMachine INTEGER
  lseIntPortActiveBroadcastPriority INTEGER
  lseIntPortPriorityLevel INTEGER
  lseIntPortSuperPriorityEnable INTEGER
  lseIntPortRoutingMode INTEGER
  lseIntPortGlobal INTEGER
  lseIntPortLearnIOCAM INTEGER
  lseIntPortSecurity INTEGER
  lseIntPortIgnoreBusy INTEGER
  lseIntPortRetryPriorityLevel1 INTEGER
  lseIntPortRetryPriorityLevel2 INTEGER
  lseIntPortRetryPriorityLevel3 INTEGER
  lseIntPortIgnoreProtocolType INTEGER
  lseIntPortCompanyMAC OCTET STRING
  lseIntPortTxSafetyZone INTEGER
  lseIntPortRxSafetyZone INTEGER
  lseIntPortTxBurstLength INTEGER
  lseIntPortSecurityIntruder INTEGER
  lseIntPortJabber INTEGER
  lseIntPortCAM OCTET STRING
  lseIntPortVideoStateMachine INTEGER
  lseIntPortTransmitWeight INTEGER
  lseIntPortSuperPriority INTEGER
  lseIntPortAlignment Counter
  lseIntPortRxReject Counter
  lseIntPortTxReject Counter
  lseIntPortRxEmpty0 INTEGER
  lseIntPortRxEmpty1 INTEGER
  lseIntPortRxEmpty2 INTEGER
  lseIntPortSuperNetNumber INTEGER
  lseIntPortGlobalSuperNet INTEGER
  lseIntPortMACAddress OCTET STRING
  lseIntPortIgnoreRoutingMode INTEGER
  lseIntPortCAMLastChange TimeTicks
  lseIntPortCopiedPort INTEGER
  lseIntPortBroadcastBehavior INTEGER
  lseIntPortFilteringMethod INTEGER
  lseIntPortSetFilter OCTET STRING
  lseIntPortRemoveFilter OCTET STRING
  lseIntPortClearFilter INTEGER
  lseIntPortMonitorMissedEvents Counter

LseIntPortMACAddEntry  
SEQUENCE    
  lseIntPortMACAddGroupId INTEGER
  lseIntPortMACAddPortId INTEGER
  lseIntPortMACAddLAId INTEGER
  lseIntPortMACAddList OCTET STRING

LseIntPortFilterEntry  
SEQUENCE    
  lseIntPortFilterGroupId INTEGER
  lseIntPortFilterPortId INTEGER
  lseIntPortFilterLAId INTEGER
  lseIntPortFilterList OCTET STRING

LsePortEntry  
SEQUENCE    
  lsePortGroupId INTEGER
  lsePortId INTEGER
  lsePortPolarity INTEGER
  lsePortBackboneStatus INTEGER

LhsGroupEntry  
SEQUENCE    
  lhsGroupId INTEGER
  lhsGroupMainSWVersion DisplayString
  lhsGroupProtocolType INTEGER

LhsPortEntry  
SEQUENCE    
  lhsPortGroupId INTEGER
  lhsPortId INTEGER
  lhsTxUCast Counter
  lhsTxBCast Counter
  lhsTxMCast Counter
  lhsTxUrunErr Counter
  lhsTxParErr Counter
  lhsRxUCast Counter
  lhsRxBCast Counter
  lhsRxMCast Counter
  lhsRxOrunErr Counter
  lhsRxParErr Counter
  lhsRxRscErr Counter
  lhsRxBadTypeErr Counter
  lhsLinkStatus INTEGER

LsBusStatsPriorityEntry  
SEQUENCE    
  lsBusStatsPriorityIndex INTEGER
  lsBusStatsPriorityPkts Counter
  lsBusStatsPriorityOctets Counter

LsBusStatsVirtualNetEntry  
SEQUENCE    
  lsBusStatsVirtualNet INTEGER
  lsBusStatsVirtualNetPackets Counter
  lsBusStatsVirtualNetOctets Counter

LsPortControlEntry  
SEQUENCE    
  lsPortControlIndex INTEGER 1..65535
  lsPortControlDataSource OBJECT IDENTIFIER
  lsPortControlTableSize INTEGER
  lsPortControlLastDeleteTime TimeTicks
  lsPortControlOwner DisplayString
  lsPortControlStatus INTEGER

LsPortFilterEntry  
SEQUENCE    
  lsPortFilter INTEGER
  lsPortFilterStatus INTEGER

LsPortEntry  
SEQUENCE    
  lsPortNumber INTEGER
  lsPortInPkts Counter
  lsPortInFCSErrors Counter
  lsPortInTooLongPkts Counter
  lsPortInOctets Counter
  lsPortInTotalErrors Counter
  lsPortInCollisions Counter

LsPortExtendedStatsEntry  
SEQUENCE    
  lsPortExtendedStatsNumber INTEGER
  lsPortCreationOrder INTEGER 1..65535
  lsPortIndex INTEGER 1..65535
  lsPortOutPkts Counter
  lsPortInBroadcastPkts Counter
  lsPortInMulticastPkts Counter

LsHostFilterEntry  
SEQUENCE    
  lsHostFilterAddress OCTET STRING
  lsHostFilterStatus INTEGER

LsHostPortFilterEntry  
SEQUENCE    
  lsHostPortFilter INTEGER
  lsHostPortFilterStatus INTEGER

LsMatrixFilterEntry  
SEQUENCE    
  lsMatrixFilterAddress OCTET STRING
  lsMatrixFilterStatus INTEGER

LsHostTimePortCorrEntry  
SEQUENCE    
  hostTimeAddress OCTET STRING
  hostTimeCreationOrder INTEGER 1..65535
  hostTimeIndex INTEGER 1..65535
  hostTimePortConnection INTEGER

LsHistoryEntry  
SEQUENCE    
  lsHistoryIndex INTEGER
  lsHistorySampleIndex INTEGER
  lsHistoryIntervalTime TimeTicks
  lsHistoryStatsDropEvents Counter
  lsHistoryStatsPkts Counter
  lsHistoryStatsOctets Counter
  lsHistoryStatsEthBroadcastPkts Counter
  lsHistoryStatsEthMulticastPkts Counter
  lsHistoryStatsGoodEthPkts Counter
  lsHistoryStatsGoodEthOctets Counter
  lsHistoryStatsBadEthPkts Counter
  lsHistoryStatsBadEthOctets Counter
  lsHistoryStatsNonEthPkts Counter
  lsHistoryStatsNonEthOctets Counter
  lsHistoryStatsPriority1Pkts Counter
  lsHistoryStatsPriority1Octets Counter
  lsHistoryStatsPriority2Pkts Counter
  lsHistoryStatsPriority2Octets Counter
  lsHistoryStatsPriority3Pkts Counter
  lsHistoryStatsPriority3Octets Counter
  lsHistoryStatsPriority4Pkts Counter
  lsHistoryStatsPriority4Octets Counter
  lsHistoryBusUtilization INTEGER 0..100

LstIntPortEntry  
SEQUENCE    
  lstIntPortGroupId INTEGER
  lstIntPortId INTEGER
  lstIntPortSidebandMode INTEGER
  lstIntPortTotalOctets Counter
  lstIntPortTotalTraffic INTEGER
  lstIntPortLocalOctets Counter
  lstIntPortLocalTraffic INTEGER
  lstIntPortInOctets Counter
  lstIntPortInTraffic INTEGER
  lstIntPortOutOctets Counter
  lstIntPortOutTraffic INTEGER
  lstIntPortTotalFrames Counter
  lstIntPortLostFrames Counter
  lstIntPortClaimFrames Counter
  lstIntPortPurgeFrames Counter
  lstIntPortNormallyCloseOpen INTEGER
  lstIntPortSlicingEnable INTEGER
  lstIntPortSliceLength INTEGER
  lstIntPortUNAddr OCTET STRING
  lstIntPortMACAddress OCTET STRING
  lstIntPortSMPTransmitEnable INTEGER
  lstIntPortIPGLength INTEGER
  lstIntPortBPDummyWindow INTEGER
  lstIntPortBPTokenWindow INTEGER
  lstIntPortTransmitWindow INTEGER
  lstIntPortBlockingPriority INTEGER
  lstIntPortNormalPriority INTEGER
  lstIntPortDummyMV INTEGER
  lstIntPortTxConsecutiveBusiesThresh INTEGER
  lstIntPortTxBufFullThresh INTEGER
  lstIntPortRxEmpty0 INTEGER
  lstIntPortRxEmpty1 INTEGER
  lstIntPortRxEmpty2 INTEGER
  lstIntPortRxFull INTEGER
  lstIntPortBPEnable INTEGER
  lstIntPortRouteSideband INTEGER

LseWANEntry  
SEQUENCE    
  lseWANGroupId INTEGER
  lseWANPortId INTEGER
  lseWANConnection INTEGER

VnsPacketEntry  
SEQUENCE    
  vnsPacketMACAddress OCTET STRING
  vnsPacketProtocolTypeMask OCTET STRING
  vnsPacketIPAddress IpAddress
  vnsPacketIPNetMask IpAddress
  vnsPacketIPXnetwork OCTET STRING
  vnsPacketStationType INTEGER
  vnsPacketPortGroupId INTEGER
  vnsPacketPortId INTEGER
  vnsPacketBackbonePort INTEGER
  vnsPacketExpectedVLAN INTEGER
  vnsPacketDetectedVLAN INTEGER
  vnsPacketBoxAgentIP IpAddress

EthTopMessageResultEntry  
SEQUENCE    
  ethTopMessageResultId INTEGER
  ethTopMessageResult OCTET STRING

EthTopMACFindResultEntry  
SEQUENCE    
  ethTopMACFindBus INTEGER
  ethTopMACFindResult OCTET STRING

EthTopLSAEntry  
SEQUENCE    
  ethTopLSAId INTEGER
  ethTopLSA OCTET STRING

EthTopAddressEntry  
SEQUENCE    
  ethTopBus INTEGER
  ethTopAddress OCTET STRING

AlarmMonitorStatusEntry  
SEQUENCE    
  alarmMonitorStatusIndex INTEGER
  alarmMonitorStatus INTEGER

PortHistoryExtendedControlEntry  
SEQUENCE    
  portHistoryExtendedControlCreateTime TimeTicks
  portHistoryExtendedControlLastBucketIndex INTEGER
  portHistoryExtendedControlNumberOfBuckets INTEGER
  portHistoryExtendedControlName DisplayString

LsPortHistoryEntry  
SEQUENCE    
  lsPortHistoryIndex INTEGER 1..65535
  lsPortHistorySampleIndex INTEGER 1..2147483647
  lsPortHistoryIntervalTime TimeTicks
  lsPortHistoryBoxConfiguration OCTET STRING
  lsPortHistoryPkts Counter
  lsPortHistoryCollisions Counter
  lsPortHistoryTotalErrors Counter

ScPortHistoryEntry  
SEQUENCE    
  scPortHistoryIndex INTEGER 1..65535
  scPortHistorySampleIndex INTEGER 1..2147483647
  scPortHistoryIntervalTime TimeTicks
  scPortHistoryBoxConfiguration OCTET STRING
  scPortHistoryGoodPktsRec Counter
  scPortHistoryGoodNonUnicastPktsRec Counter
  scPortHistoryCollisions Counter
  scPortHistoryBadPkts Counter
  scPortHistoryGoodPktsSent Counter

Defined Values

lntLanSwitch 1.3.6.1.4.1.81.19
OBJECT IDENTIFIER    

lntTopology 1.3.6.1.4.1.81.23
OBJECT IDENTIFIER    

smon 1.3.6.1.4.1.81.30
OBJECT IDENTIFIER    

lse 1.3.6.1.4.1.81.19.1
OBJECT IDENTIFIER    

lhs 1.3.6.1.4.1.81.19.2
OBJECT IDENTIFIER    

lsMonitor 1.3.6.1.4.1.81.19.3
OBJECT IDENTIFIER    

lst 1.3.6.1.4.1.81.19.4
OBJECT IDENTIFIER    

lsVNChange 1.3.6.1.4.1.81.19.6
OBJECT IDENTIFIER    

vnsPacket 1.3.6.1.4.1.81.19.7
OBJECT IDENTIFIER    

lseGroupTable 1.3.6.1.4.1.81.19.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LseGroupEntry

lseGroupEntry 1.3.6.1.4.1.81.19.1.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LseGroupEntry  

lseGroupId 1.3.6.1.4.1.81.19.1.1.1.1
Slot number in which the group is installed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lseGroupFastOpen 1.3.6.1.4.1.81.19.1.1.1.2
Setting the value of this attribute to ON activates the port for short idle time when code violation was detected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notSupported(255)  

lseGroup10MSqlt 1.3.6.1.4.1.81.19.1.1.1.3
Setting the value of this attribute to ON activates the mechanism of detection preamble of 10Mhz.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notSupported(255)  

lseGroupSmartSqlt 1.3.6.1.4.1.81.19.1.1.1.4
Control the mechnism of the input sensitivity of the port.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notSupported(255)  

lseGroupCParameter 1.3.6.1.4.1.81.19.1.1.1.5
Defines the number of consecutive collisions the port waits before it ceases transmitting of 512 bits time toward the station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..7  

lseGroupIPGJamLength 1.3.6.1.4.1.81.19.1.1.1.6
Defines the IPG jam length in Ethernet bit time (100nS) start at 16 bit time in steps of 16, to 112 bit time. For LFE-100, (Fast Ethernet bit time (10nS)) values are from 48 bit times (480nano-seconds) in step of 4, to 124 (1240nano-seconds). Any number between the defined values will take to nearest smaller value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 16..124  

lseGroupJamLength 1.3.6.1.4.1.81.19.1.1.1.7
Defines the Jam Length in time starting from 8 (800micro-seconds) to 120 (12mili-seconds). Each step of 8 is equal 800micro-seconds. For LFE-100, values are from 8 (80micro-seconds) to 32 (320micro-seconds), each step of 8 is equal 800micro-seconds. Any number between the defined values will take to nearest smaller value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 8..120  

lseGroupDataBlinderLength 1.3.6.1.4.1.81.19.1.1.1.8
Defines the Data Blinder Length in Ethernet bit time (100nS) start at 16 bit time in steps of 16 to 112 bit time. For LFE-100, (Fast Ethernet bit time (10nS)) values are from 0 bit times in step of 4, to 124 (1240nano-seconds). Any number between the defined values will take to nearest smaller value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..124  

lseGroupIPGDataLength 1.3.6.1.4.1.81.19.1.1.1.9
Defines the IPG (Inter Packet Gap) length in Ethernet bit time (100nS) starting at 16 bit time in steps of 16 to 112 bit time. For LFE-100, (Fast Ethernet bit time (10nS)) values are from 48 bit times (480nano-seconds) in step of 4, to 124 (1240 nano-seconds). Any number between the defined values will take to nearest smaller value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 16..124  

lseGroupActiveMonitor 1.3.6.1.4.1.81.19.1.1.1.10
This attribute defines the module which is the high-speed bus active monitor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2), notSupported(255)  

lseGroupBackbone12 1.3.6.1.4.1.81.19.1.1.1.11
Port 1 and 2 in the board perform as Backbone link. lse208 - upper cluster is RX only and lower cluster is TX only. lse404 - upper port is Rx only and second port is Tx only. Two remains port are performed as regular foirl interfaces. lse808 - the first port is RX from line only, the second - TX to line only, the rest are in regular10BaseT mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notSupported(255)  

lseGroupSetDefaults 1.3.6.1.4.1.81.19.1.1.1.12
Set all hardware parameters to their default values. This item will always return a value of off(2), since it acts like a toggle switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notSupported(255)  

lseGroupBackbone34 1.3.6.1.4.1.81.19.1.1.1.13
Port 3 and 4 in the board performed as Backbone link. lse404 - Third port is Rx only and forth port is Tx only. Two remaining ports performed as regular foirl interfaces.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notSupported(255)  

lseGroupBackboneRedun12 1.3.6.1.4.1.81.19.1.1.1.14
Value on(1) of this attribute defines a redundancy (backup) relationship between Backbone port 1 and backbone port 2 on a LANswiltch module.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notSupported(255)  

lseGroupBackoffFromJam 1.3.6.1.4.1.81.19.1.1.1.15
Value on(1) of this attribute defines non-consecutive jam after a collision has occured in LANswitch modules.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notSupported(255)  

lseGroupCAMClear 1.3.6.1.4.1.81.19.1.1.1.16
Value on(1) of this attribute causes the LANSwitch module to clear the CAM tables.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notSupported(255)  

lseGroupJamPrevent 1.3.6.1.4.1.81.19.1.1.1.17
Jam prevent flag. Functionaly, Jam prevent is a back-pressure into the line direction. There are two modes of opration: 1) automatic - the sensor gets the items status from HW 2) manual - the sensor gets the items status from user.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notSupported(255)  

lseGroupNormOpCl 1.3.6.1.4.1.81.19.1.1.1.18
Normaly Open/Close flag. When open(1) state is set, the sensor should activate a delay mechanism for the module to operate at Normaly-Closed mode for 30 seconds in order to enable the port's CAM to learn the current segmentation
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER open(1), closed(2), notSupported(255)  

lseGroupNormOpDelay 1.3.6.1.4.1.81.19.1.1.1.19
When sets to a value greater than 0 (zero) and the MIB item lseGroupNormOpCl is equal to closed(2), this item define the time delay that the module will remain in normally open mode before it will move to normaly close mode. This will be activated after the user will reset the module. The value is in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..600000  

lseGroupAutoPartitionEnable 1.3.6.1.4.1.81.19.1.1.1.20
Enables autopartition mechanism support in the group level for each port of the group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), notSupported(255)  

lseGroupWorkState 1.3.6.1.4.1.81.19.1.1.1.21
One of the possible states of the module: this item indicates if the module is runing or booting. The value runAndBoot(3) indicates a serious software problem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER run(1), boot(2), runAndBoot(3), none(4), notSupported(255)  

lseGroupBITResult 1.3.6.1.4.1.81.19.1.1.1.22
The Bit Indication Test in state 'faulty' indicates a problem. The agent should send a fault trap in this case.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), faulty(2), notSupported(255)  

lseGroupAssignSlots 1.3.6.1.4.1.81.19.1.1.1.23
In a multi-backbone configuration within a single HUB, this item enables to assign backbone module with specific slot numbers. Only packets from these slots should be handled by the backbone module, Packets from other slots are ignored. The 16-bit string represents the slots in the hub, a Bit per slot. Bit 0 (LSB) corresponds to slot 1, Bit 15 (MSB) corresponds to slot 16. A Bit set to '1' indicates that the corresponding slot is assigned to this backbone module. A clear Bit '0', indicates that the corresponding slot is ignored by this module. Todate, only the LEB200 module supports this capability. The string is expressed in Hex. Default value is FF, i.e., all slots are assigned to module.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(2)  

lseGroupHSBMonStatus 1.3.6.1.4.1.81.19.1.1.1.24
This is a bit-masked attribute which displays events which may cause HSB Reset. When a bit is '1', the relevant evet may cause HSB Reset. When a bit is '0', the relevant evet will not cause HSB Reset. The following are the events: LSB D0 - Too many packets were discarded from a queue. D1 - One of the Tx buffers to HSB is full for more than a default period. D2 - Token has not been available for more than a default period. D3 - RX Buffer full in one of the ports. D4 -'1' HSB Reset has been occured , '0'- HSB reset hadn't occured since last time this MIB has been read. D5 - '0' - the ram of the relevant port is O.K. (the port is decode in D6-D7) , '1' The ram is not O.K. D6- D7 Decode the relevant port that It's ram is not O.K 00 - Port no'0 01 - Port no' 1 10 - Port no' 2 11 - Port no' 3.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lseGroupEnableHSBReset 1.3.6.1.4.1.81.19.1.1.1.25
This item enables/disables the HSB Reset mechanism in the module.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), notSupported(255)  

lseIntPort 1.3.6.1.4.1.81.19.1.2
OBJECT IDENTIFIER    

lseIntPortTable 1.3.6.1.4.1.81.19.1.2.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LseIntPortEntry

lseIntPortEntry 1.3.6.1.4.1.81.19.1.2.1.1
An entry in the table, containing data about a single internal LanSwitch bank.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LseIntPortEntry  

lseIntPortGroupId 1.3.6.1.4.1.81.19.1.2.1.1.1
Id of the group to which the port belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

lseIntPortId 1.3.6.1.4.1.81.19.1.2.1.1.2
Number of LanSwitch port in the board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

lseIntPortIOMode 1.3.6.1.4.1.81.19.1.2.1.1.3
on(1) activates IO mode in which all packets on the high-speed bus that were not captured by any regular port are captured by the I/O port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notSupported(255)  

lseIntPortResetSwitchCAM 1.3.6.1.4.1.81.19.1.2.1.1.4
Acting like toggle switch thus always returns off(2) on read. When set to on(1), causes the reset of the LANswitch CAM (addresses) memory.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notSupported(255)  

lseIntPortVideoPacket 1.3.6.1.4.1.81.19.1.2.1.1.5
When set to on(1), all Tx packets toward the high-speed bus to video type packets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notSupported(255)  

lseIntPortPriorityStateMachine 1.3.6.1.4.1.81.19.1.2.1.1.6
Setting the value of this attribute to on(1) activates the priority mechanism.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notSupported(255)  

lseIntPortActiveBroadcastPriority 1.3.6.1.4.1.81.19.1.2.1.1.7
Setting the value of this attribute to on(1) activates the active broadcast mode in priority mechanism.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notSupported(255)  

lseIntPortPriorityLevel 1.3.6.1.4.1.81.19.1.2.1.1.8
This attribute defines the priority levels of Tx packets toward the high-speed bus. The highest priority is broadcast(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER broadcast(1), multicast(2), video(3), regular(4), default(5), mngrTerminal(6), notSupported(255)  

lseIntPortSuperPriorityEnable 1.3.6.1.4.1.81.19.1.2.1.1.9
When limited space is left in Tx buffer, only the highest priority packets are accepted. This in turn can create a situation in which one port tries to send a packet and never gets its chance to be accepted. In order to prevent it the destination port counts the successive number of tries of the low priority port, and when a certain (8) number is reached, it accepts the packet anyhow. The value on(1) defines the retry parameter for the priority level mechanism.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notSupported(255)  

lseIntPortRoutingMode 1.3.6.1.4.1.81.19.1.2.1.1.10
generic(1) - examines all the packets that are not members of any virtual network. net(2) - examines only the packets that have the port's network number. allPackets(4) - examine all packets regardless of their routing mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER generic(1), net(2), dst-port(3), allPackets(4), notSupported(255)  

lseIntPortGlobal 1.3.6.1.4.1.81.19.1.2.1.1.11
Setting the global mode to on(1) sets the port in a network routing mode that examines all packets that are not members of all virtual networks.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notSupported(255)  

lseIntPortLearnIOCAM 1.3.6.1.4.1.81.19.1.2.1.1.12
Setting this parameter to on(1) enables an I/O port to learn incoming MAC addresses received in its port and store them in its CAM. Packets with destination address that match the CAM addresses are not transferred to the high speed bus.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notSupported(255)  

lseIntPortSecurity 1.3.6.1.4.1.81.19.1.2.1.1.13
Setting the value of this attribute to on(1) activates the security mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notSupported(255)  

lseIntPortIgnoreBusy 1.3.6.1.4.1.81.19.1.2.1.1.14
Setting the value of this attribute to on(1) activates the ignore busy mode. The busy signal toward the high-speed bus is not activated even though the TX buffer is full.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notSupported(255)  

lseIntPortRetryPriorityLevel1 1.3.6.1.4.1.81.19.1.2.1.1.15
The port increases the priority level of the high-speed bus packets after the defined number (0..31) trials.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..31  

lseIntPortRetryPriorityLevel2 1.3.6.1.4.1.81.19.1.2.1.1.16
The port increases the priority level of the high-speed bus packets after the defined number (0..255) trials.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

lseIntPortRetryPriorityLevel3 1.3.6.1.4.1.81.19.1.2.1.1.17
The port increases the priority level of the high-speed bus packets after the defined number (0..255) trials.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

lseIntPortIgnoreProtocolType 1.3.6.1.4.1.81.19.1.2.1.1.18
Any packet regardless of the protocol type is received from the high-speed bus.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ignore(1), not-ignore(2), notSupported(255)  

lseIntPortCompanyMAC 1.3.6.1.4.1.81.19.1.2.1.1.19
The attribute defines the first three bytes of the MAC address of the video host server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

lseIntPortTxSafetyZone 1.3.6.1.4.1.81.19.1.2.1.1.20
Defines the Tx Safety Zone in bits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..510  

lseIntPortRxSafetyZone 1.3.6.1.4.1.81.19.1.2.1.1.21
Defines the Rx Safety Zone in bits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..510  

lseIntPortTxBurstLength 1.3.6.1.4.1.81.19.1.2.1.1.22
Defines the TX Burst Length in bits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..510  

lseIntPortSecurityIntruder 1.3.6.1.4.1.81.19.1.2.1.1.23
The value on(1) of this attribute reflects a security violation occurrence.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2), notSupported(255)  

lseIntPortJabber 1.3.6.1.4.1.81.19.1.2.1.1.24
Value on(1) of this attribute reflects that jabber was transmitted to the port by the high-speed bus.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2), notSupported(255)  

lseIntPortCAM 1.3.6.1.4.1.81.19.1.2.1.1.25
112 bytes of MAC addresses. Each contains one byte of the port number and six bytes of the MAC address. This enables to send 16 MAC Addresses ( 16*7=112 bytes)
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..112)  

lseIntPortVideoStateMachine 1.3.6.1.4.1.81.19.1.2.1.1.26
Setting the value of this attribute to on(1) activates the video state machine mode. Received packets are filtered by demand from the station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notSupported(255)  

lseIntPortTransmitWeight 1.3.6.1.4.1.81.19.1.2.1.1.27
Defines the Transmit Weight of the frames for the current LANswitch port toward the high - speed bus.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..127  

lseIntPortSuperPriority 1.3.6.1.4.1.81.19.1.2.1.1.28
Setting the value of this attribute to on(1) activates the retry priority functions.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notSupported(255)  

lseIntPortAlignment 1.3.6.1.4.1.81.19.1.2.1.1.29
The number of alignment errors observed on a specified port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lseIntPortRxReject 1.3.6.1.4.1.81.19.1.2.1.1.30
The number of Rx buffer full observed on a specified port, from the line toward the High-speed bus.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

lseIntPortTxReject 1.3.6.1.4.1.81.19.1.2.1.1.31
The number of Tx buffer full observed on a specified port, from the line toward the High-speed bus.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

lseIntPortRxEmpty0 1.3.6.1.4.1.81.19.1.2.1.1.32
Define the highest threshold to receive packets from the HSB. This parameter is relevant when the receive buffer is full. When the buffer reached this threshold, all packets will be rejected. Version 7.0
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lseIntPortRxEmpty1 1.3.6.1.4.1.81.19.1.2.1.1.33
Define the middle threshold to receive packets from the HSB. This parameter is relevant when the receive buffer is almost full. When the buffer reached this threshold, the only packets that the port will receive will be those with the highest priority (1) who were already written in the priority machine. All other packets will be rejected. The space between empty1 to empty0 is reserved to packets with the highest priority (1) who were already written in the priority machine. Version 7.0
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lseIntPortRxEmpty2 1.3.6.1.4.1.81.19.1.2.1.1.34
Define the lowest threshold to receive packets from the HSB. This parameter is relevant when the receive buffer is almost full. When the buffer reached this threshold, the only packets that the port will receive will be those with at least middle priority (2) who were already written in the priority machine. All other packets will be rejected. The space between empty2 to empty1 is reserved to packets with at least middle priority (2) who were already written in the priority machine. When the buffer did not reached this lowest priority, no packet will be rejected for empty space. Version 7.0
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lseIntPortSuperNetNumber 1.3.6.1.4.1.81.19.1.2.1.1.35
If the internal port supports SuperNet mode, the user have to define the supernet number. Default value is 0. Change of this number when the internal port is Generic, Global or Global SuperNet must be blocked by the sensor.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..14  

lseIntPortGlobalSuperNet 1.3.6.1.4.1.81.19.1.2.1.1.36
An internal port that is part of all SuperNets is set to Global SuperNet routing. The SuperNet number is 15 in this case.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notSupported(255)  

lseIntPortMACAddress 1.3.6.1.4.1.81.19.1.2.1.1.37
The MAC address of the port, if it has. If not, an octet string of length 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

lseIntPortIgnoreRoutingMode 1.3.6.1.4.1.81.19.1.2.1.1.38
When this parameter is 'ignore', the LANSwitch port monitors all packets without paying attention to the virtual net assignment.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ignore(1), notIgnore(2), notSupported(255)  

lseIntPortCAMLastChange 1.3.6.1.4.1.81.19.1.2.1.1.39
This attribute contains the value of sysUpTime at the time any change occured to the content of the specific CAM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

lseIntPortCopiedPort 1.3.6.1.4.1.81.19.1.2.1.1.40
The port monitored on the LANswitch bus by the LSE-PM module. The value of this item is: 32*(S-1)+P, where S is the slot number in the hub and P the port within the slot (1.. 32). When the value of this item is 0, the Copy Port function is disabled and the port is in Host Filter mode. For modules that do not support this functionality, this item will have the value 65,535.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lseIntPortBroadcastBehavior 1.3.6.1.4.1.81.19.1.2.1.1.41
This item relates only to LSE-PM modules. The value of this item defines the method by which the module treats broadcast and multicast packets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), selective(2), receiveAll(3), notSupported(255)  

lseIntPortFilteringMethod 1.3.6.1.4.1.81.19.1.2.1.1.42
This item is relevant only to the LSE-PM module. The value of this item defines the filtering method used to capture packets from the Cellenium bus to the Ethernet connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER source(1), destination(2), sourceOrDestination(3), group(4), notSupported(255)  

lseIntPortSetFilter 1.3.6.1.4.1.81.19.1.2.1.1.43
This item is relevant only to the LSE-PM module. The item is used to add new addresses to the module's filtering table. The string is a sequence of MAC addresses, 6 bytes each. When the item is set, each address in the list is added to the filtering table, and related packets are then captured. This item always returns an empty string in response to get requests.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..452)  

lseIntPortRemoveFilter 1.3.6.1.4.1.81.19.1.2.1.1.44
This item is relevant only to the LSE-PM module. The item is used to remove existing addresses from the module's filtering table. The string is a sequence of MAC addresses, 6 bytes each. When the item is set, all addresses in the list are removed from the filtering table, and the module stops capturing related packets .
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..452)  

lseIntPortClearFilter 1.3.6.1.4.1.81.19.1.2.1.1.45
This item is relevant only to the LSE-PM module. The item acts as a toggle switch: when its value is set to clear(2), the contents of the module's filtering tables are cleared. This item always returns an empty string in response to get requests.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), clear(2), notSupported(255)  

lseIntPortMonitorMissedEvents 1.3.6.1.4.1.81.19.1.2.1.1.46
This item is relevant only to LSE-PM modules. The value of the counter is the number of packets that were not captured by the port as a result of overload on the Ethernet line, though the port's filter was configured to capture these packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lseIntPortMACAdd 1.3.6.1.4.1.81.19.1.2.2
OBJECT IDENTIFIER    

lseIntPortMACAddTable 1.3.6.1.4.1.81.19.1.2.2.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LseIntPortMACAddEntry

lseIntPortMACAddEntry 1.3.6.1.4.1.81.19.1.2.2.1.1
An entry in the table containing data about a single internal switch port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LseIntPortMACAddEntry  

lseIntPortMACAddGroupId 1.3.6.1.4.1.81.19.1.2.2.1.1.1
Id of the group to which the port belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

lseIntPortMACAddPortId 1.3.6.1.4.1.81.19.1.2.2.1.1.2
The LANswitch port number in the board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

lseIntPortMACAddLAId 1.3.6.1.4.1.81.19.1.2.2.1.1.3
The lower 2 bytes of the Last MAC Address on the previous list. Use the 0 value to start from the beginning of the list.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lseIntPortMACAddList 1.3.6.1.4.1.81.19.1.2.2.1.1.4
This item contains MAC address (source addresses) of the port. Each MAC address is 6 bytes long. The list is started with the MAC address that follows the lseIntPortMACAddLAId.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..452)  

lseIntPortFilter 1.3.6.1.4.1.81.19.1.2.3
OBJECT IDENTIFIER    

lseIntPortFilterTable 1.3.6.1.4.1.81.19.1.2.3.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LseIntPortFilterEntry

lseIntPortFilterEntry 1.3.6.1.4.1.81.19.1.2.3.1.1
This table is supported only for the LSE-PM module. The table reports the contents of the port's filtering mechanism.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LseIntPortFilterEntry  

lseIntPortFilterGroupId 1.3.6.1.4.1.81.19.1.2.3.1.1.1
This item is relevant only for the LSE-PM module. The item defines the group to which the port belongs (i.e., the module number).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

lseIntPortFilterPortId 1.3.6.1.4.1.81.19.1.2.3.1.1.2
This item is relevant only for the LSE-PM module. The item defines the number of the LANswitch port in the board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

lseIntPortFilterLAId 1.3.6.1.4.1.81.19.1.2.3.1.1.3
This item is relevant only for the LSE-PM module. The item contains the lower 2 bytes of the Last MAC Address on the previous list. Use the 0 value to start from the beginning of the list.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lseIntPortFilterList 1.3.6.1.4.1.81.19.1.2.3.1.1.4
This item is relevant only for the LSE-PM module. The item contains the MAC addresses in the filter. Each MAC address is 6 bytes long. The list is started with the MAC address that follows the lseIntPortFilterLAId.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..452)  

lsePort 1.3.6.1.4.1.81.19.1.3
OBJECT IDENTIFIER    

lsePortTable 1.3.6.1.4.1.81.19.1.3.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LsePortEntry

lsePortEntry 1.3.6.1.4.1.81.19.1.3.1.1
An entry in the table containing data about a single external switch port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LsePortEntry  

lsePortGroupId 1.3.6.1.4.1.81.19.1.3.1.1.1
Id of the group to which the port belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

lsePortId 1.3.6.1.4.1.81.19.1.3.1.1.2
Number of LanSwitch port in the board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

lsePortPolarity 1.3.6.1.4.1.81.19.1.3.1.1.3
Setting the value of this attribute to ON activates the automatic port polarity detection mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notSupported(255)  

lsePortBackboneStatus 1.3.6.1.4.1.81.19.1.3.1.1.4
It is the status of a single port that associated with a particular Backbone port. It is utilized by the Agent in the Soft Redundancy algorithm between Backbone ports in LANswitch environment
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ok(1), fault(2), notSupported(255)  

lhsGroupTable 1.3.6.1.4.1.81.19.2.1
Table with group-related parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LhsGroupEntry

lhsGroupEntry 1.3.6.1.4.1.81.19.2.1.1
Entry in the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LhsGroupEntry  

lhsGroupId 1.3.6.1.4.1.81.19.2.1.1.1
Unique slot identifier in which the module is located.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lhsGroupMainSWVersion 1.3.6.1.4.1.81.19.2.1.1.2
Software version of the main CPU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

lhsGroupProtocolType 1.3.6.1.4.1.81.19.2.1.1.3
This attribute set the protocol type in which the LHB is collecting from the high-speed bus.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), ethernet(2), tokenring(3), ethernet-tokenring(4), notSupported(255)  

lhsPortTable 1.3.6.1.4.1.81.19.2.2
Table with port-related parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LhsPortEntry

lhsPortEntry 1.3.6.1.4.1.81.19.2.2.1
Entry in the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LhsPortEntry  

lhsPortGroupId 1.3.6.1.4.1.81.19.2.2.1.1
Slot index in which the module is located.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lhsPortId 1.3.6.1.4.1.81.19.2.2.1.2
Port number to which the data is related.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lhsTxUCast 1.3.6.1.4.1.81.19.2.2.1.3
Number of unicast packets transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lhsTxBCast 1.3.6.1.4.1.81.19.2.2.1.4
Number of broadcast packets transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lhsTxMCast 1.3.6.1.4.1.81.19.2.2.1.5
Number of multicast packets transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lhsTxUrunErr 1.3.6.1.4.1.81.19.2.2.1.6
Number of transmit packet underruns.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lhsTxParErr 1.3.6.1.4.1.81.19.2.2.1.7
Number of transmit packet parity errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lhsRxUCast 1.3.6.1.4.1.81.19.2.2.1.8
Number of unicast packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lhsRxBCast 1.3.6.1.4.1.81.19.2.2.1.9
Number of broadcast packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lhsRxMCast 1.3.6.1.4.1.81.19.2.2.1.10
Number of multicast packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lhsRxOrunErr 1.3.6.1.4.1.81.19.2.2.1.11
Number of receive overrun errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lhsRxParErr 1.3.6.1.4.1.81.19.2.2.1.12
Number of receive parity errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lhsRxRscErr 1.3.6.1.4.1.81.19.2.2.1.13
Number of receive resource errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lhsRxBadTypeErr 1.3.6.1.4.1.81.19.2.2.1.14
Number of bad frame type packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lhsLinkStatus 1.3.6.1.4.1.81.19.2.2.1.15
This attribute describes the status of the optical link as detected by the sensor software.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), linkFailure(2), notSupported(255)  

lsMonitorResourceAllocation 1.3.6.1.4.1.81.19.3.1
This item reports for which of the listed monitoring activity CPU resources are being allocated at this time. Activities that are not in the above list are allocated resources at all times.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), hostStats(2), portExtendedStats(3), hostMatrix(4)  

lsBusStats 1.3.6.1.4.1.81.19.3.2
OBJECT IDENTIFIER    

lsBusStatsDropEvents 1.3.6.1.4.1.81.19.3.2.1
The total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has been detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsBusStatsPkts 1.3.6.1.4.1.81.19.3.2.2
The total number of packets (including error packets) received on the LANswitch bus.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsBusStatsOctets 1.3.6.1.4.1.81.19.3.2.3
The total number of octets of data (including those in bad packets) received on the LANswitch bus (excluding framing bits but including FCS octets).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsBusStatsUtilization 1.3.6.1.4.1.81.19.3.2.4
The utilization of the LANswitch bus, expressed in percents of the maximum possible LANswitch traffic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lsBusStatsEthBroadcastPkts 1.3.6.1.4.1.81.19.3.2.5
The total number of good Ethernet packets received that were directed to the broadcast address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsBusStatsMulticastPkts 1.3.6.1.4.1.81.19.3.2.6
The total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsBusStatsGoodEthPkts 1.3.6.1.4.1.81.19.3.2.7
The total number of good Ethernet packets received on the LANswitch bus.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsBusStatsGoodEthOctets 1.3.6.1.4.1.81.19.3.2.8
The total number of octets that were received on the LANswitch bus in good Ethernet packets (excluding framing bits but including FCS octets).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsBusStatsBadEthPkts 1.3.6.1.4.1.81.19.3.2.9
The total number of bad Ethernet packets received on the LANswitch bus.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsBusStatsBadEthOctets 1.3.6.1.4.1.81.19.3.2.10
The total number of octets that were received on the LANswitch bus in bad Ethernet packets (excluding framing bits but including FCS octets).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsBusStatsNonEthPkts 1.3.6.1.4.1.81.19.3.2.11
The total number of packets received on the LANswitch bus in non Ethernet packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsBusStatsNonEthOctets 1.3.6.1.4.1.81.19.3.2.12
The total number of octets that were received on the LANswitch bus in non Ethernet packets (excluding framing bits but including FCS octets).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsBusStatsPriorityTable 1.3.6.1.4.1.81.19.3.2.13
A list of priority count entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LsBusStatsPriorityEntry

lsBusStatsPriorityEntry 1.3.6.1.4.1.81.19.3.2.13.1
A list of statistics related to a specific priority level on the LANswitch bus.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LsBusStatsPriorityEntry  

lsBusStatsPriorityIndex 1.3.6.1.4.1.81.19.3.2.13.1.1
The priority for which this entry reports statistics .
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4  

lsBusStatsPriorityPkts 1.3.6.1.4.1.81.19.3.2.13.1.2
The total number of packets (including error packets) received on the LANswitch bus whose priority is that defined for this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsBusStatsPriorityOctets 1.3.6.1.4.1.81.19.3.2.13.1.3
The total number of octets (including error packets) received on the LANswitch bus whose packets have the priority defined for this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsBusStatsVirtualNetList 1.3.6.1.4.1.81.19.3.2.14
A bitmap defining the status of the virtual nets in the Virtual NetTable. The first bit is for Virtual Net 0 and so on. For existing virtual nets the bit is 1, otherwise 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(32)  

lsBusStatsVirtualNetTable 1.3.6.1.4.1.81.19.3.2.15
A list of virtual net statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LsBusStatsVirtualNetEntry

lsBusStatsVirtualNetEntry 1.3.6.1.4.1.81.19.3.2.15.1
A list of staistics related to a specific virtual net which exists on the LANswitch bus.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LsBusStatsVirtualNetEntry  

lsBusStatsVirtualNet 1.3.6.1.4.1.81.19.3.2.15.1.1
The virtual net for which this entry reports statistics .
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lsBusStatsVirtualNetPackets 1.3.6.1.4.1.81.19.3.2.15.1.2
The number of good packets that were transmitted to this virtual net by ports in this hub.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsBusStatsVirtualNetOctets 1.3.6.1.4.1.81.19.3.2.15.1.3
The number of octets in good packets that were transmitted to this virtual net by ports in this hub.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsPortStats 1.3.6.1.4.1.81.19.3.3
OBJECT IDENTIFIER    

lsPortControlTable 1.3.6.1.4.1.81.19.3.3.1
A list of port control entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LsPortControlEntry

lsPortControlEntry 1.3.6.1.4.1.81.19.3.3.1.1
A list of parameters that set up the collection of extended statistics related to LANswitch ports. Data is collected in the lsPortExtendedStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LsPortControlEntry  

lsPortControlIndex 1.3.6.1.4.1.81.19.3.3.1.1.1
An index that uniquely identifies an entry in the lsPortControlTable. Each such entry defines a function that monitors ports and places statistics about them in the portTable on behalf of this lsPortControlEntry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

lsPortControlDataSource 1.3.6.1.4.1.81.19.3.3.1.1.2
This object identifies the source of the data for this instance of the port function. The statistics in this group reflect all packets on the LANswitch bus that are trasferred by the lsPortFilterTable. This object may not be modified if the associated lsPortControlStatus object is equal to valid(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  OBJECT IDENTIFIER  

lsPortControlTableSize 1.3.6.1.4.1.81.19.3.3.1.1.3
The number of ports for which SW counters are collected by the agent. This number is limited to 5.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lsPortControlLastDeleteTime 1.3.6.1.4.1.81.19.3.3.1.1.4
The value of sysUpTime when the last entry was deleted from the portion of the portTable associated with this lsPortControlEntry. If no deletions have occurred, this value shall be zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

lsPortControlOwner 1.3.6.1.4.1.81.19.3.3.1.1.5
The entity that configured this entry and is therefore using the resources assigned to it.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

lsPortControlStatus 1.3.6.1.4.1.81.19.3.3.1.1.6
The status of this lsPortControl entry. If this object is not equal to valid(1), all associated entries in the lsPortTable, shall be deleted by the agent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), createRequest(2), underCreation(3), invalid(4)  

lsPortFilterTable 1.3.6.1.4.1.81.19.3.3.2
A list of LANswitch ports to be monitored on the high-speed bus. The OID of this table is a legitimate value for the lsPortControlDataSource. When this OID is a source for the host table, a port in the table has the same meaning as an instruction to the agent to collect statistics for all the hosts connected to that port. The maximum size of this table is 5 entries
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LsPortFilterEntry

lsPortFilterEntry 1.3.6.1.4.1.81.19.3.3.2.1
An entry in the filter table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LsPortFilterEntry  

lsPortFilter 1.3.6.1.4.1.81.19.3.3.2.1.1
The port monitored on the LANswitch bus. The value of this item is: (16*S-1)+P, where S is the slot number in the hub (1..16) and P the port within the slot (1..N).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lsPortFilterStatus 1.3.6.1.4.1.81.19.3.3.2.1.2
The status of this lsPortFilter entry. When the status is valid, the port defined in the corresponding lsPortFilter is a part of the filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(4)  

lsPortFilterTableClear 1.3.6.1.4.1.81.19.3.3.3
Setting the value of this item to clear(2) causes the agent to clear all entries in the PortFilterTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), clear(2)  

lsPortTable 1.3.6.1.4.1.81.19.3.3.4
A list of port entries. Each entry contains statistical data pertaining to a single port. An entry is maintained at all times for each of the LANswitch ports that exist in the hub. This table is not controlled by the lsPortControlTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LsPortEntry

lsPortEntry 1.3.6.1.4.1.81.19.3.3.4.1
A collection of statistics for a particular LANswitch port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LsPortEntry  

lsPortNumber 1.3.6.1.4.1.81.19.3.3.4.1.1
The monitored port. The value of this item is: 16*(S-1)+P, where S is the slot number in the hub (1..16) and P the port within the slot (1..N).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lsPortInPkts 1.3.6.1.4.1.81.19.3.3.4.1.2
The number of good packets transmitted through this port into the LANswitch bus .
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsPortInFCSErrors 1.3.6.1.4.1.81.19.3.3.4.1.3
The number of packets with FCS errors transmitted through this port into the LANswitch bus .
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsPortInTooLongPkts 1.3.6.1.4.1.81.19.3.3.4.1.4
The number of packets longer than 1518 bytes transmitted through this port into the LANswitch bus .
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsPortInOctets 1.3.6.1.4.1.81.19.3.3.4.1.5
The number of octets in good packets (excluding framing bits but including FCS octets) transmitted through this port into the LANswitch bus .
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsPortInTotalErrors 1.3.6.1.4.1.81.19.3.3.4.1.6
This item is a summation of all errors on this port. It contains the total hardware errors related to a specific port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsPortInCollisions 1.3.6.1.4.1.81.19.3.3.4.1.7
This counter is incremented by one for any CarrierEvent signal on the port for which the CollisionEvent signal on this port is also asserted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsPortExtendedReportingList 1.3.6.1.4.1.81.19.3.3.5
A list of all ports in the hub for which Extended statistics are currently reported. 16 bits in the bitmap are allocated for each slot in the hub. The MSB is for port 1 of slot 1, and the LSB is for port 16 of slot 16. The bit representing ports for which extended statistics are now reported has the value of 1, otherwise 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(32)  

lsPortExtendedStatsTable 1.3.6.1.4.1.81.19.3.3.6
A list of port entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LsPortExtendedStatsEntry

lsPortExtendedStatsEntry 1.3.6.1.4.1.81.19.3.3.6.1
A collection of statistics for a particular LANswitch port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LsPortExtendedStatsEntry  

lsPortExtendedStatsNumber 1.3.6.1.4.1.81.19.3.3.6.1.1
The monitored port.The value of this item is: 16*(S-1)+P, where S is the slot number in the hub (1..16) and P the port within the slot (1..N).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lsPortCreationOrder 1.3.6.1.4.1.81.19.3.3.6.1.2
An index that defines the relative ordering of the discovery time of ports captured for a particular lsPortControlEntry. This index shall be between 1 and N, where N is the value of the associated lsPortControlTableSize. The ordering of the indexes is based on the order of each entry's insertion into the table, in which entries added earlier have a lower index value than entries added later. It is important to note that the order for a particular entry may change as an (earlier) entry is deleted from the table. Because this order may change, management stations should make use of the lsPortControlLastDeleteTime variable in the lsPortControlEntry associated with the relevant portion of the lsPortTable. By observing this variable, the management station may detect the circumstances where a previous association between a value of lsPortCreationOrder and a lsPortEntry may no longer hold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

lsPortIndex 1.3.6.1.4.1.81.19.3.3.6.1.3
The set of collected port statistics of which this entry is a part. The set of ports identified by a particular value of this index is associated with the lsPortControlEntry as identified by the same value of lsPortControlIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

lsPortOutPkts 1.3.6.1.4.1.81.19.3.3.6.1.4
The number of packets without errors transmitted from the LANswitch bus to this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsPortInBroadcastPkts 1.3.6.1.4.1.81.19.3.3.6.1.5
The number of good Ethernet packets directed towards the broadcast address that were transmitted to the LANswitch bus through this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsPortInMulticastPkts 1.3.6.1.4.1.81.19.3.3.6.1.6
The number of good Ethernet packets directed to a multicast address that were transmitted to the LANswitch bus through this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsHostFilterTable 1.3.6.1.4.1.81.19.3.4
A list of hosts to be monitored on the high-speed bus by the RMON MIB hosts group. The OID of this table is a legitimate value for the hostControlDataSource. The size of the table is limited to 200 entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LsHostFilterEntry

lsHostFilterEntry 1.3.6.1.4.1.81.19.3.4.1
An entry in the filter table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LsHostFilterEntry  

lsHostFilterAddress 1.3.6.1.4.1.81.19.3.4.1.1
The MAC address of a host monitored on the high-speed bus.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

lsHostFilterStatus 1.3.6.1.4.1.81.19.3.4.1.2
The status of this lsHostFilter entry. When the status is valid, the host defined in the corresponding lsHostFilter is a part of the filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(4)  

lsHostFilterTableClear 1.3.6.1.4.1.81.19.3.5
Setting the value of this item to clear(2) causes the agent to clear all entries in the HostFilterTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), clear(2)  

lsHostPortFilterTable 1.3.6.1.4.1.81.19.3.6
A list of ports to be monitored on the high-speed bus. The OID of this table is a legitimate value for the hostControlDataSource. When this OID is a source for the host table, a port in the table has the same meaning as an instruction to the agent to collect statistics for all the hosts connected to that port. The size of this table is limited to 5 entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LsHostPortFilterEntry

lsHostPortFilterEntry 1.3.6.1.4.1.81.19.3.6.1
An entry in the filter table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LsHostPortFilterEntry  

lsHostPortFilter 1.3.6.1.4.1.81.19.3.6.1.1
The port monitored on the LANswitch bus. The value of this item is: 16*(S-1)+P, where S is the slot number in the hub (1..16) and P the port within the slot (1..N).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lsHostPortFilterStatus 1.3.6.1.4.1.81.19.3.6.1.2
The status of this lsHostPortFilter entry. When the status is valid, the hosts defined by the corresponding lsHostPortFilter are a part of the filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(4)  

lsHostPortFilterTableClear 1.3.6.1.4.1.81.19.3.7
Setting the value of this item to clear(2) causes the agent to clear all entries in the HostPortFilterTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), clear(2)  

lsMatrixFilterTable 1.3.6.1.4.1.81.19.3.8
A list of hosts to be monitored on the high-speed bus by the RMON MIB matrix group. The OID of this table is a legitimate value for the hostControlDataSource. The size of the table is limited to 200 entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LsMatrixFilterEntry

lsMatrixFilterEntry 1.3.6.1.4.1.81.19.3.8.1
An entry in the filter table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LsMatrixFilterEntry  

lsMatrixFilterAddress 1.3.6.1.4.1.81.19.3.8.1.1
The MAC address of a host monitored on the high-speed bus.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

lsMatrixFilterStatus 1.3.6.1.4.1.81.19.3.8.1.2
The status of this lsMatrixFilter entry. When the status is valid, the hosts defined by the corresponding lsMatrixFilter are a part of the filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(4)  

lsMatrixFilterTableClear 1.3.6.1.4.1.81.19.3.9
Setting the value of this item to clear(2) causes the agent to clear all entries in the MatrixFilterTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), clear(2)  

lsHostTimePortCorrTable 1.3.6.1.4.1.81.19.3.10
An addition to the RMON MIB's hostTimeTable. This table contains a list of MAC addresses that were monitored on the high-speed bus and the switch ports to which they are connected. The index of this table is the same as for the standard RMON hostTimeTable. Indexes are hostTimeCreationOrder and hostTimeIndex. The MAC address is stored in hostTimeAddress. The port to which the MAC address is connected hostTimePortConnection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LsHostTimePortCorrEntry

lsHostTimePortCorrEntry 1.3.6.1.4.1.81.19.3.10.1
An entry in the MAC to port correlation table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LsHostTimePortCorrEntry  

hostTimeAddress 1.3.6.1.4.1.81.19.3.10.1.1
The physical address of this host.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hostTimeCreationOrder 1.3.6.1.4.1.81.19.3.10.1.2
An index that uniquely identifies an entry in the hostTime table among those entries associated with the same hostControlEntry. This index shall be between 1 and N, where N is the value of the associated hostControlTableSize. The ordering of the indexes is based on the order of each entry's insertion into the table, in which entries added earlier have a lower index value than entries added later. Thus the management station has the ability to learn of new entries added to this table without downloading the entire table. It is important to note that the index for a particular entry may change as an (earlier) entry is deleted from the table. Because this order may change, management stations should make use of the hostControlLastDeleteTime variable in the hostControlEntry associated with the relevant portion of the hostTimeTable. By observing this variable, the management station may detect the circumstances where a download of the table may have missed entries, and where a previous association between a value of hostTimeCreationOrder and a hostTimeEntry may no longer hold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

hostTimeIndex 1.3.6.1.4.1.81.19.3.10.1.3
The set of collected host statistics of which this entry is a part. The set of hosts identified by a particular value of this index is associated with the hostControlEntry as identified by the same value of hostControlIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

hostTimePortConnection 1.3.6.1.4.1.81.19.3.10.1.4
The switch port to which this hostTimeAddress is connected. The coding of the port number varies for different hubs and packplanes. For the LANSwitch HSB the value of this item is: The value of this item is: 32*(S-1)+P, where S is the slot number in the hub and P the LANswitch port within the slot (1.. 32). For hosts whose port connection is not identified by the agent, the value of this item will be 65,535
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lsHistoryTable 1.3.6.1.4.1.81.19.3.11
A list of High Speed Bus history entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LsHistoryEntry

lsHistoryEntry 1.3.6.1.4.1.81.19.3.11.1
An historical sample of LANswitch statistics on a HSB. This sample is associated with the historyControlEntry which set up the parameters for a regular collection of these samples.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LsHistoryEntry  

lsHistoryIndex 1.3.6.1.4.1.81.19.3.11.1.1
The history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of historyControlIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lsHistorySampleIndex 1.3.6.1.4.1.81.19.3.11.1.2
An index that uniquely identifies the particular sample this entry represents among all samples associated with the same lshistoryControlEntry. This index starts at 1 and increases by one as each new sample is taken.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

lsHistoryIntervalTime 1.3.6.1.4.1.81.19.3.11.1.3
The value of sysUpTime when this bucket was sampled .
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

lsHistoryStatsDropEvents 1.3.6.1.4.1.81.19.3.11.1.4
The total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has been detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsHistoryStatsPkts 1.3.6.1.4.1.81.19.3.11.1.5
The total number of packets (including error packets) received on the LANswitch bus.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsHistoryStatsOctets 1.3.6.1.4.1.81.19.3.11.1.6
The total number of octets of data (including those in bad packets) received on the LANswitch bus (excluding framing bits but including FCS octets).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsHistoryStatsEthBroadcastPkts 1.3.6.1.4.1.81.19.3.11.1.7
The total number of good Ethernet packets received that were directed to the broadcast address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsHistoryStatsEthMulticastPkts 1.3.6.1.4.1.81.19.3.11.1.8
The total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsHistoryStatsGoodEthPkts 1.3.6.1.4.1.81.19.3.11.1.9
The total number of good Ethernet packets received on the LANswitch bus.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsHistoryStatsGoodEthOctets 1.3.6.1.4.1.81.19.3.11.1.10
The total number of octets that were received on the LANswitch bus in good Ethernet packets (excluding framing bits but including FCS octets).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsHistoryStatsBadEthPkts 1.3.6.1.4.1.81.19.3.11.1.11
The total number of bad Ethernet packets received on the LANswitch bus.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsHistoryStatsBadEthOctets 1.3.6.1.4.1.81.19.3.11.1.12
The total number of octets that were received on the LANswitch bus in bad Ethernet packets (excluding framing bits but including FCS octets).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsHistoryStatsNonEthPkts 1.3.6.1.4.1.81.19.3.11.1.13
The total number of packets received on the LANswitch bus in non Ethernet packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsHistoryStatsNonEthOctets 1.3.6.1.4.1.81.19.3.11.1.14
The total number of octets that were received on the LANswitch bus in non Ethernet packets (excluding framing bits but including FCS octets).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsHistoryStatsPriority1Pkts 1.3.6.1.4.1.81.19.3.11.1.15
The total number of packets (including error packets) received on the LANswitch bus whose priority is that defined for this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsHistoryStatsPriority1Octets 1.3.6.1.4.1.81.19.3.11.1.16
The total number of octets (including error packets) received on the LANswitch bus whose packets have the priority defined for this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsHistoryStatsPriority2Pkts 1.3.6.1.4.1.81.19.3.11.1.17
The total number of packets (including error packets) received on the LANswitch bus whose priority is that defined for this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsHistoryStatsPriority2Octets 1.3.6.1.4.1.81.19.3.11.1.18
The total number of octets (including error packets) received on the LANswitch bus whose packets have the priority defined for this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsHistoryStatsPriority3Pkts 1.3.6.1.4.1.81.19.3.11.1.19
The total number of packets (including error packets) received on the LANswitch bus whose priority is that defined for this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsHistoryStatsPriority3Octets 1.3.6.1.4.1.81.19.3.11.1.20
The total number of octets (including error packets) received on the LANswitch bus whose packets have the priority defined for this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsHistoryStatsPriority4Pkts 1.3.6.1.4.1.81.19.3.11.1.21
The total number of packets (including error packets) received on the LANswitch bus whose priority is that defined for this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsHistoryStatsPriority4Octets 1.3.6.1.4.1.81.19.3.11.1.22
The total number of octets (including error packets) received on the LANswitch bus whose packets have the priority defined for this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsHistoryBusUtilization 1.3.6.1.4.1.81.19.3.11.1.23
The utilization of the LANswitch bus, expressed in percents of the maximum LANswitch traffic possible.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..100  

lstIntPort 1.3.6.1.4.1.81.19.4.1
OBJECT IDENTIFIER    

lstIntPortTable 1.3.6.1.4.1.81.19.4.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LstIntPortEntry

lstIntPortEntry 1.3.6.1.4.1.81.19.4.1.1.1
An entry in the table, containing data about a LANswitch port of LANswitch Token-Ring modules.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LstIntPortEntry  

lstIntPortGroupId 1.3.6.1.4.1.81.19.4.1.1.1.1
Id of the group to which the switch port belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

lstIntPortId 1.3.6.1.4.1.81.19.4.1.1.1.2
Switch port Id in module
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

lstIntPortSidebandMode 1.3.6.1.4.1.81.19.4.1.1.1.3
Enable Sideband mode on internal port. In this mode, MAC level management of all rings can be done.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notSupported(255)  

lstIntPortTotalOctets 1.3.6.1.4.1.81.19.4.1.1.1.4
Total number of octets circling in the ring. It is the sum of local octets, in octets and out octets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lstIntPortTotalTraffic 1.3.6.1.4.1.81.19.4.1.1.1.5
Total traffic in ring as part of the maximum possible utilization, 4Mbps or 16Mbps, expressed in percents. It is the sum of local traffic, in traffic and out traffic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..100  

lstIntPortLocalOctets 1.3.6.1.4.1.81.19.4.1.1.1.6
Number of octets local to the ring. The local traffic includes only traffic between stations on the local ring.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lstIntPortLocalTraffic 1.3.6.1.4.1.81.19.4.1.1.1.7
Local traffic in ring as part of the maximum possible utilization, 4Mbps or 16Mbps, expressed in percents. The local traffic includes only traffic between stations on the local ring.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..100  

lstIntPortInOctets 1.3.6.1.4.1.81.19.4.1.1.1.8
Number of octets passing in to the HSB from the ring. The In traffic includes only traffic going from stations on the local ring to stations on other rings.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lstIntPortInTraffic 1.3.6.1.4.1.81.19.4.1.1.1.9
In traffic to the HSB from the ring as part of the maximum possible utilization, 4Mbps or 16Mbps, expressed in percents. The In traffic includes only traffic going from stations on the local ring to stations on other rings.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..100  

lstIntPortOutOctets 1.3.6.1.4.1.81.19.4.1.1.1.10
Number of octets passing out from the HSB to the ring. The Out traffic includes only traffic going to stations on the local ring from stations on other rings.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lstIntPortOutTraffic 1.3.6.1.4.1.81.19.4.1.1.1.11
Out traffic from the HSB to the ring as part of the maximum possible utilization, 4Mbps or 16Mbps, expressed in percents. The Out traffic includes only traffic going to stations on the local ring from stations on other rings.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..100  

lstIntPortTotalFrames 1.3.6.1.4.1.81.19.4.1.1.1.12
Total number of frames in the ring.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lstIntPortLostFrames 1.3.6.1.4.1.81.19.4.1.1.1.13
Number of lost frames because of Back Pressure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lstIntPortClaimFrames 1.3.6.1.4.1.81.19.4.1.1.1.16
Number of Claim-Token frames in the ring.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lstIntPortPurgeFrames 1.3.6.1.4.1.81.19.4.1.1.1.17
Number of Ring-Purge frames in the ring.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lstIntPortNormallyCloseOpen 1.3.6.1.4.1.81.19.4.1.1.1.18
Defines the IO mode of the switch port: normally close or normally open. When the port is in 'normallyOpen' mode, all packets enter the port regardless to CAM content.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normallyClose(1), normallyOpen(2), notSupported(255)  

lstIntPortSlicingEnable 1.3.6.1.4.1.81.19.4.1.1.1.19
Packet slicing mechanism for decreasing the delay of packets transmission in the HSB. Value 'on' enables the slicing mechanism.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notSupported(255)  

lstIntPortSliceLength 1.3.6.1.4.1.81.19.4.1.1.1.20
The slice length in bytes. It determines the delay of packet's transmission through the HSB.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lstIntPortUNAddr 1.3.6.1.4.1.81.19.4.1.1.1.21
MAC address of the Upstream Neighbor of the line interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

lstIntPortMACAddress 1.3.6.1.4.1.81.19.4.1.1.1.22
MAC address of the line interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

lstIntPortSMPTransmitEnable 1.3.6.1.4.1.81.19.4.1.1.1.23
Enable SMP MAC frame transmission by line interface during single-station situation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notSupported(255)  

lstIntPortIPGLength 1.3.6.1.4.1.81.19.4.1.1.1.24
Number of bytes interval between frames transmission of the line interface to the ring.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

lstIntPortBPDummyWindow 1.3.6.1.4.1.81.19.4.1.1.1.25
The time (in 0.25ms) between Dummy frames sendings during Back Pressure situation of the line interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

lstIntPortBPTokenWindow 1.3.6.1.4.1.81.19.4.1.1.1.26
The time (in 0.25ms) until Token release during Back Pressure situation of the line interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lstIntPortTransmitWindow 1.3.6.1.4.1.81.19.4.1.1.1.27
The time (in 0.25ms) of line interface transmission until Token release.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lstIntPortBlockingPriority 1.3.6.1.4.1.81.19.4.1.1.1.28
The priority of the line interface during Back Pressure situation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

lstIntPortNormalPriority 1.3.6.1.4.1.81.19.4.1.1.1.29
The priority of the line interface for HSB packets transmission into the ring.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

lstIntPortDummyMV 1.3.6.1.4.1.81.19.4.1.1.1.30
Content of MV (Major Vector) field in Dummy frame during Back Pressure of line interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

lstIntPortTxConsecutiveBusiesThresh 1.3.6.1.4.1.81.19.4.1.1.1.31
The threshold of the number of consecutive busies counter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lstIntPortTxBufFullThresh 1.3.6.1.4.1.81.19.4.1.1.1.32
Threshold indicator for frames buffer full.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lstIntPortRxEmpty0 1.3.6.1.4.1.81.19.4.1.1.1.33
Upper threshold pointer of Rx buffer. Determines the degree of buffer overflow and back pressure efficiency.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lstIntPortRxEmpty1 1.3.6.1.4.1.81.19.4.1.1.1.34
Middle threshold pointer of Rx buffer. Determines the degree of buffer overflow and back pressure efficiency..
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lstIntPortRxEmpty2 1.3.6.1.4.1.81.19.4.1.1.1.35
Lower threshold pointer of Rx buffer. Determines the degree of buffer overflow and back pressure efficiency.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lstIntPortRxFull 1.3.6.1.4.1.81.19.4.1.1.1.36
Rx full threshold pointer. Determines the degree of buffer overflow and back pressure efficiency.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

lstIntPortBPEnable 1.3.6.1.4.1.81.19.4.1.1.1.37
Enable/disable the Back Pressure mechanism.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), notSupported(255)  

lstIntPortRouteSideband 1.3.6.1.4.1.81.19.4.1.1.1.38
Set the internal port ability to get from the HSB sideband packets. The value 'on' enables the routing of sideband packet from the HSB into the internal port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), notSupported(255)  

lseWANTable 1.3.6.1.4.1.81.19.5
LAN Switch WAN data table. Implementation of this table is mandatory for all LANswitch modules with WAN ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LseWANEntry

lseWANEntry 1.3.6.1.4.1.81.19.5.1
Entry in the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LseWANEntry  

lseWANGroupId 1.3.6.1.4.1.81.19.5.1.1
Slot number in which the module is located.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lseWANPortId 1.3.6.1.4.1.81.19.5.1.2
WAN port index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lseWANConnection 1.3.6.1.4.1.81.19.5.1.3
WAN connection status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER connected(1), disconnected(2)  

lsVNChangeMACAddress 1.3.6.1.4.1.81.19.6.1
MAC Address that was detected with at a switch port and its mapping to a Virtual Network does not fit with the third layer address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

lsVNChangeDetected 1.3.6.1.4.1.81.19.6.2
Virtual Network number detected at the switch port when a VN change is reported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4095  

lsVNChangeExpected 1.3.6.1.4.1.81.19.6.3
Virtual Network number detected at the switch port when a VN change is reported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4095  

lsVNChangeGroup 1.3.6.1.4.1.81.19.6.4
The slot number of the card where the Vitual Network change was detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lsVNChangePort 1.3.6.1.4.1.81.19.6.5
The port number where the Vitual Network change was detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vnsPacketTable 1.3.6.1.4.1.81.19.7.1
VNS packets data table. Implementation of this table is mandatory for 3LS (3rd layer switch) module.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VnsPacketEntry

vnsPacketEntry 1.3.6.1.4.1.81.19.7.1.1
Entry in the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VnsPacketEntry  

vnsPacketMACAddress 1.3.6.1.4.1.81.19.7.1.1.1
The Mac Address of the sending station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

vnsPacketProtocolTypeMask 1.3.6.1.4.1.81.19.7.1.1.2
This is a mask of the exising protocols. Bit(0)='1' when IP protocol exist and '0' otherwise, Bit(1)='1' when IPX protocol exist and '0' otherwise, all other bits are '0' for the moment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

vnsPacketIPAddress 1.3.6.1.4.1.81.19.7.1.1.3
The IP address of the packet's sending station. In case the typeaddress is not IP this field will be 0.0.0.0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

vnsPacketIPNetMask 1.3.6.1.4.1.81.19.7.1.1.4
The IP Address Mask from the IP Interface Table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

vnsPacketIPXnetwork 1.3.6.1.4.1.81.19.7.1.1.5
The IPX NetWork Address of the packet's sending station. In case that the typeaddress is not IPX this field will be 0.0.0.0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

vnsPacketStationType 1.3.6.1.4.1.81.19.7.1.1.6
The Station Type indicates from where comes the packets in the case of the IPX protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), client(2), server(3), notSupported(255)  

vnsPacketPortGroupId 1.3.6.1.4.1.81.19.7.1.1.7
Index which identifies the group inside the chassis for which this entry contains information. It equals with the slot number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

vnsPacketPortId 1.3.6.1.4.1.81.19.7.1.1.8
Index which identifies the port inside the group for which this entry contains information. It equals with the port number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

vnsPacketBackbonePort 1.3.6.1.4.1.81.19.7.1.1.9
The value 2 indicates that the port source of the packet is a backbone port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), backbone(2), noBackbone(3), notSupported(255)  

vnsPacketExpectedVLAN 1.3.6.1.4.1.81.19.7.1.1.10
The value of this item is the VLAN number that the packet had to have according to it's address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vnsPacketDetectedVLAN 1.3.6.1.4.1.81.19.7.1.1.11
The value of this item is the detected VLAN number of the arrived packet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vnsPacketBoxAgentIP 1.3.6.1.4.1.81.19.7.1.1.12
The IP Address of the Hub's BoxAgent where the 3LS (3rd layer switch) module exist.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

topDiscovery 1.3.6.1.4.1.81.23.1
The value of this item defines the activity status of the agent's discovery algorithm. When its value is set to topoMessages(2), the agent searches for the topology messages (interhub and bridge messages). When the value is macFind(3), the agent searches for the MAC addresses defined in the item ethTopMACFindList. The results of the search are then reported in ethTopMACResultTable. When the value is swBackboneMsgMonitor(4), the agent monitors messages with specific destination address. The result of monitoring is reported in ethTopMessageResultEntry. The value of this item cannot be changed from one state to another without being first changed to idle(1). This item is timed by TopDiscoveryTimeOut (return back to idle(1)).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), topoMessages(2), macFind(3), swBackboneMsgMonitor(4), notSupported(255)  

topDiscoveryTimeOut 1.3.6.1.4.1.81.23.2
The value of this item defines the maximal time (in seconds) that an agent can remain in the non-idle toplogy discovery mode. When the agent is set to the topology mode (TopDiscovery=topoDiscovery(2) or macFind(3)) the counter is started. If the manager doesn't return the agent back to normal operation mode within the timeOut, the agent will automatically return to normal operation (TopDiscovery=idle(1)) and stop searching for the special messages. The value of this item can be changed only when TopDiscovery=idle(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ethTop 1.3.6.1.4.1.81.23.3
OBJECT IDENTIFIER    

ethTopDiscoveryTx 1.3.6.1.4.1.81.23.3.1
This item is a switch that activates the inter-agent topology messages. txInterhubMsg(2) - the agent transmits interhub discovery messages. txBridgeMsg(3) - the agent transmits bridge discovery messages. txAckMsg(4) - the agent transmits acknowledgment messages.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), txInterhubMsg(2), txBridgeMsg(3), txAckMsg(4)  

ethTopClearMessageResult 1.3.6.1.4.1.81.23.3.2
When this item is set to clear(2), the agent sets the values of all ethTopMessageResult items to '0'. When finished the 'clear' process the Agent sets the variable to idle(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), clear(2)  

ethTopNumOfMessageResults 1.3.6.1.4.1.81.23.3.3
This item contains the number of messages currently stored in the ethTopMessageResultTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ethTopMessageResultTable 1.3.6.1.4.1.81.23.3.4
A table that contains 3 items with the results of the topology messages received by the agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthTopMessageResultEntry

ethTopMessageResultEntry 1.3.6.1.4.1.81.23.3.4.1
An entry in the table, containing part of the received data.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  EthTopMessageResultEntry  

ethTopMessageResultId 1.3.6.1.4.1.81.23.3.4.1.1
The table's index. Can assume the values 1,2, or 3.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ethTopMessageResult 1.3.6.1.4.1.81.23.3.4.1.2
A row in the Topology Messages result table. Each row contains up to 44 elements.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..440)  

ethTopMACFindList 1.3.6.1.4.1.81.23.3.5
Up to 6 MAC addresses to be searched for by the Agent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..36)  

ethTopMACFindResultTable 1.3.6.1.4.1.81.23.3.6
A table that contains 4 rows with the results of the MACFind process. Each row contains the results for one of the hub's buses. The number of items supported is equal to the number of buses supported by the agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthTopMACFindResultEntry

ethTopMACFindResultEntry 1.3.6.1.4.1.81.23.3.6.1
An entry in the table, containing one LSA item.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  EthTopMACFindResultEntry  

ethTopMACFindBus 1.3.6.1.4.1.81.23.3.6.1.1
The bus for which the results are reported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ethTopMACFindResult 1.3.6.1.4.1.81.23.3.6.1.2
The results of the search for the requested MAC addresses fo the relevant bus. The format is: MAC (6 bytes), slot (1 byte), port (1 byte). If the Agent doesn't find a MAC's correlation, the slot and port will be '0'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..48)  

ethTopLSATable 1.3.6.1.4.1.81.23.3.7
A table that contains 8 rows with the last source addresses found on the hub's ports. Each row in the table reports the last source addresses for specific slots in the hub: #1: modules 1,2,17,18; #5: modules 9,10,25, 26; #2: modules 3,4,19,20; #6: modules 11,12,27, 28; #3: modules 5,6,21,22; #7: modules 13,14,29,30; #4: modules 7,8,23,24; #8: modules 15,16,31,32; The data in the items appears by the slot order defined above. All 8 items exist even if some of them are empty.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthTopLSAEntry

ethTopLSAEntry 1.3.6.1.4.1.81.23.3.7.1
An entry in the table, containing one LSA item.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  EthTopLSAEntry  

ethTopLSAId 1.3.6.1.4.1.81.23.3.7.1.1
The table's index. Assumes values 1,2,3,...,8.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ethTopLSA 1.3.6.1.4.1.81.23.3.7.1.2
This item contains the last source addresses for modules in related slots. For each port the data is: slot (one byte), port (one byte), address (6 bytes). For none existing ports the LSA will be 0. The first bit (MSB) of the slot byte defines the user status: '0' - single user; '1' - multi user.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(384)  

ethTopAddressTable 1.3.6.1.4.1.81.23.3.8
A table that contains the MAC addresses used by the agent for the topology messages.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthTopAddressEntry

ethTopAddressEntry 1.3.6.1.4.1.81.23.3.8.1
An entry in the topology address table. The number of entries is equal to the number of Ethernet buses supported by the agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  EthTopAddressEntry  

ethTopBus 1.3.6.1.4.1.81.23.3.8.1.1
The bus for which this address is defined.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ethTopAddress 1.3.6.1.4.1.81.23.3.8.1.2
The MAC address used by the agent for the topology discovery process on the related bus.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

ethTopHSBMonitor 1.3.6.1.4.1.81.23.3.9
This item ask for monitoring the LANSwitch bus by the NMA-RS. startMonitor(2) value, is used to start monitor the LANSwitch bus collect the lsHostTimePortCorrTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), startMonitor(2), notSupported(255)  

alarms 1.3.6.1.4.1.81.30.1
OBJECT IDENTIFIER    

alarmMonitorStatusTable 1.3.6.1.4.1.81.30.1.1
A list of alarms status for Alarm entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlarmMonitorStatusEntry

alarmMonitorStatusEntry 1.3.6.1.4.1.81.30.1.1.1
Each entry contains an index (appropriate to specific alarmIndex item) and the alarmed status of this alarm entry
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AlarmMonitorStatusEntry  

alarmMonitorStatusIndex 1.3.6.1.4.1.81.30.1.1.1.1
An index that uniquely identifies an entry in the alarmMonitorStatusTable. This index is the same as the appropriate alarm Table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

alarmMonitorStatus 1.3.6.1.4.1.81.30.1.1.1.2
The alarms' status for the appropriate alarm table 1 - ok 2 - alarmState.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), alarmState(2)  

alarmUtilitiesCommand 1.3.6.1.4.1.81.30.1.2
The alarms command can be one of the follows: 1 - idle - idle state. 2 - clearAll - clear all alarms and events in the Agent tables. 254 - failed - If the Agent does not succeed to perform the command, the alarmUtilitiesCommand will be changed to failed, to indicate the fail of performing the last Command.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), clearAll(2), notSupported(255)  

portHistory 1.3.6.1.4.1.81.30.3
OBJECT IDENTIFIER    

portHistoryExtendedControlTable 1.3.6.1.4.1.81.30.3.1
A list of extended history control entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortHistoryExtendedControlEntry

portHistoryExtendedControlEntry 1.3.6.1.4.1.81.30.3.1.1
A list of extended parameters that set up a periodic sampling of statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PortHistoryExtendedControlEntry  

portHistoryExtendedControlCreateTime 1.3.6.1.4.1.81.30.3.1.1.1
The value of sysUpTime at the creation of the control row and start of the history collection index with the same value of the historyControlIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

portHistoryExtendedControlLastBucketIndex 1.3.6.1.4.1.81.30.3.1.1.2
The index of the last bucket that was stored to the history table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portHistoryExtendedControlNumberOfBuckets 1.3.6.1.4.1.81.30.3.1.1.3
The number of buckets stored in the probe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

portHistoryExtendedControlName 1.3.6.1.4.1.81.30.3.1.1.4
The name of the this history collection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

lsPortHistoryTable 1.3.6.1.4.1.81.30.3.2
A list of LANswitch port history entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LsPortHistoryEntry

lsPortHistoryEntry 1.3.6.1.4.1.81.30.3.2.1
An historical sample of port switch statistics with the historyControlEntry, which set up the parameters for a regular collection of these samples.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LsPortHistoryEntry  

lsPortHistoryIndex 1.3.6.1.4.1.81.30.3.2.1.1
The history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of historyControlIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

lsPortHistorySampleIndex 1.3.6.1.4.1.81.30.3.2.1.2
An index that uniquely identifies the particular sample, this entry represents among all samples associated with the same lshistoryControlEntry. This index starts at 1 and increases by one as each new sample is taken.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

lsPortHistoryIntervalTime 1.3.6.1.4.1.81.30.3.2.1.3
The value of sysUpTime at the start of the interval over which this sample was measured.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

lsPortHistoryBoxConfiguration 1.3.6.1.4.1.81.30.3.2.1.4
Octet String build by concatenating the genGroupType of the maximum 16 modules in the LANSwitch box. By reading this variable a management application can draw a list of the LANSwitch modules and ports configuration relevant for the application.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

lsPortHistoryPkts 1.3.6.1.4.1.81.30.3.2.1.5
The total number of good packets received on the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsPortHistoryCollisions 1.3.6.1.4.1.81.30.3.2.1.6
The best estimate of the total number of collisions on this port during this sampling interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

lsPortHistoryTotalErrors 1.3.6.1.4.1.81.30.3.2.1.7
The total number of errors detected by the switching hardware on this port, including FCS errors and too long packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

scPortHistoryTable 1.3.6.1.4.1.81.30.3.3
A list of Xswitch port history entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ScPortHistoryEntry

scPortHistoryEntry 1.3.6.1.4.1.81.30.3.3.1
An historical sample of port switch statistics with the historyControlEntry, which set up the parameters for a regular collection of these samples.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ScPortHistoryEntry  

scPortHistoryIndex 1.3.6.1.4.1.81.30.3.3.1.1
The history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of historyControlIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

scPortHistorySampleIndex 1.3.6.1.4.1.81.30.3.3.1.2
An index that uniquely identifies the particular sample, this entry represents among all samples associated with the same scHistoryControlEntry. This index starts at 1 and increases by one as each new sample is taken.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

scPortHistoryIntervalTime 1.3.6.1.4.1.81.30.3.3.1.3
The value of sysUpTime at the start of the interval over which this sample was measured.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

scPortHistoryBoxConfiguration 1.3.6.1.4.1.81.30.3.3.1.4
Octet String build by concatenating the genGroupType of the maximum 14 modules in the Meritage box or 4 boxes in the Visage stack. By reading this variable a management application can draw a list of the modules (boxes) and ports configuration relevant for the application.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

scPortHistoryGoodPktsRec 1.3.6.1.4.1.81.30.3.3.1.5
The total number of good packets received by the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

scPortHistoryGoodNonUnicastPktsRec 1.3.6.1.4.1.81.30.3.3.1.6
The total number of good packets received that were directed to multicat or broadcast address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

scPortHistoryCollisions 1.3.6.1.4.1.81.30.3.3.1.7
The best estimate of the total number of collisions on the Ethernet segment connected to the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

scPortHistoryBadPkts 1.3.6.1.4.1.81.30.3.3.1.8
The total number of bad packets filtered by the port. This item is the summation of: scEthPortCRCAlignErrors, scEthPortOversizePkts, scEthPortFragments and scEthPortJabber.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

scPortHistoryGoodPktsSent 1.3.6.1.4.1.81.30.3.3.1.9
The total number of good packets sent by the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

portHistoryMemoryAvailability 1.3.6.1.4.1.81.30.3.4
This item reflect the status of available Port History. standard(1) value, is used when there are no memory limitations. limited1(2) value, is used when the limitation is 3 MB. limited1(3) value, is used when the limitation is 2 MB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER standard(1), limited1(2), limited2(3), notSupported(255)