APPIAN-LPORT-DS3-MIB

File: APPIAN-LPORT-DS3-MIB.mib (76187 bytes)

Imported modules

APPIAN-SMI-MIB	APPIAN-CHASSIS-MIB	SNMPv2-SMI
SNMPv2-TC	PerfHist-TC-MIB

Imported symbols

acLport	AcAdminStatus	AcNodeId
acChassisCurrentTime	acChassisRingId	MODULE-IDENTITY
OBJECT-TYPE	NOTIFICATION-TYPE	DisplayString
TimeStamp	TruthValue	PerfIntervalCount

Defined Types

AcDs3ConfigEntry
SEQUENCE
	acLogicalDs3ConfigNodeId	AcNodeId
	acLogicalDs3ConfigIndex	INTEGER
	acLogicalDs3ConfigAdminStatus	AcAdminStatus
	acLogicalDs3ConfigTimeElapsedInterval	INTEGER
	acLogicalDs3ConfigValidIntervals	INTEGER
	acLogicalDs3ConfigTimeElapsedDay	INTEGER
	acLogicalDs3ConfigValidDays	INTEGER
	acLogicalDs3ConfigTimeElapsedFarEndInterval	INTEGER
	acLogicalDs3ConfigValidFarEndIntervals	INTEGER
	acLogicalDs3ConfigTimeElapsedFarEndDay	INTEGER
	acLogicalDs3ConfigValidFarEndDays	INTEGER
	acLogicalDs3ConfigSendCode	INTEGER
	acLogicalDs3ConfigCircuitIdentifier	DisplayString
	acLogicalDs3ConfigLoopbackConfig	INTEGER
	acLogicalDs3ConfigLineStatus	INTEGER
	acLogicalDs3ConfigTransmitClockSource	INTEGER
	acLogicalDs3ConfigInvalidIntervals	INTEGER
	acLogicalDs3ConfigInvalidDays	INTEGER
	acLogicalDs3ConfigInvalidFarEndIntervals	INTEGER
	acLogicalDs3ConfigInvalidFarEndDays	INTEGER
	acLogicalDs3ConfigLineStatusLastChange	TimeStamp
	acLogicalDs3ConfigLineStatusChangeTrapEnable	INTEGER
	acLogicalDs3ConfigLoopbackStatus	INTEGER
	acLogicalDs3ConfigFarEndEquipCode	DisplayString
	acLogicalDs3ConfigFarEndLocationIDCode	DisplayString
	acLogicalDs3ConfigFarEndFrameIDCode	DisplayString
	acLogicalDs3ConfigFarEndUnitCode	DisplayString
	acLogicalDs3ConfigFarEndFacilityIDCode	DisplayString

AcDs3IntervalEntry
SEQUENCE
	acLogicalDs3IntervalNodeId	AcNodeId
	acLogicalDs3IntervalIndex	INTEGER
	acLogicalDs3IntervalNumber	INTEGER
	acLogicalDs3IntervalValidStats	TruthValue
	acLogicalDs3IntervalResetStats	TruthValue
	acLogicalDs3IntervalPESs	PerfIntervalCount
	acLogicalDs3IntervalPSESs	PerfIntervalCount
	acLogicalDs3IntervalSEFSs	PerfIntervalCount
	acLogicalDs3IntervalUASs	PerfIntervalCount
	acLogicalDs3IntervalLCVs	PerfIntervalCount
	acLogicalDs3IntervalPCVs	PerfIntervalCount
	acLogicalDs3IntervalLESs	PerfIntervalCount
	acLogicalDs3IntervalCCVs	PerfIntervalCount
	acLogicalDs3IntervalCESs	PerfIntervalCount
	acLogicalDs3IntervalCSESs	PerfIntervalCount

AcDs3DayEntry
SEQUENCE
	acLogicalDs3DayNodeId	AcNodeId
	acLogicalDs3DayIndex	INTEGER
	acLogicalDs3DayNumber	INTEGER
	acLogicalDs3DayValidStats	TruthValue
	acLogicalDs3DayResetStats	TruthValue
	acLogicalDs3DayPESs	PerfIntervalCount
	acLogicalDs3DayPSESs	PerfIntervalCount
	acLogicalDs3DaySEFSs	PerfIntervalCount
	acLogicalDs3DayUASs	PerfIntervalCount
	acLogicalDs3DayLCVs	PerfIntervalCount
	acLogicalDs3DayPCVs	PerfIntervalCount
	acLogicalDs3DayLESs	PerfIntervalCount
	acLogicalDs3DayCCVs	PerfIntervalCount
	acLogicalDs3DayCESs	PerfIntervalCount
	acLogicalDs3DayCSESs	PerfIntervalCount

AcDs3FarEndIntervalEntry
SEQUENCE
	acLogicalDs3FarEndIntervalNodeId	AcNodeId
	acLogicalDs3FarEndIntervalIndex	INTEGER
	acLogicalDs3FarEndIntervalNumber	INTEGER
	acLogicalDs3FarEndIntervalValidStats	TruthValue
	acLogicalDs3FarEndIntervalResetStats	TruthValue
	acLogicalDs3FarEndIntervalCESs	PerfIntervalCount
	acLogicalDs3FarEndIntervalCSESs	PerfIntervalCount
	acLogicalDs3FarEndIntervalCCVs	PerfIntervalCount
	acLogicalDs3FarEndIntervalUASs	PerfIntervalCount

AcDs3FarEndDayEntry
SEQUENCE
	acLogicalDs3FarEndDayNodeId	AcNodeId
	acLogicalDs3FarEndDayIndex	INTEGER
	acLogicalDs3FarEndDayNumber	INTEGER
	acLogicalDs3FarEndDayValidStats	TruthValue
	acLogicalDs3FarEndDayResetStats	TruthValue
	acLogicalDs3FarEndDayCESs	PerfIntervalCount
	acLogicalDs3FarEndDayCSESs	PerfIntervalCount
	acLogicalDs3FarEndDayCCVs	PerfIntervalCount
	acLogicalDs3FarEndDayUASs	PerfIntervalCount

AcDs3ThresholdEntry
SEQUENCE
	acLogicalDs3ThresholdNodeId	AcNodeId
	acLogicalDs3ThresholdIndex	INTEGER
	acLogicalDs3ThresholdNEIntervalPESs	INTEGER
	acLogicalDs3ThresholdNEIntervalPSESs	INTEGER
	acLogicalDs3ThresholdNEIntervalSEFSs	INTEGER
	acLogicalDs3ThresholdNEIntervalUASs	INTEGER
	acLogicalDs3ThresholdNEIntervalLCVs	INTEGER
	acLogicalDs3ThresholdNEIntervalPCVs	INTEGER
	acLogicalDs3ThresholdNEIntervalLESs	INTEGER
	acLogicalDs3ThresholdNEIntervalCCVs	INTEGER
	acLogicalDs3ThresholdNEIntervalCESs	INTEGER
	acLogicalDs3ThresholdNEIntervalCSESs	INTEGER
	acLogicalDs3ThresholdNEDayPESs	INTEGER
	acLogicalDs3ThresholdNEDayPSESs	INTEGER
	acLogicalDs3ThresholdNEDaySEFSs	INTEGER
	acLogicalDs3ThresholdNEDayUASs	INTEGER
	acLogicalDs3ThresholdNEDayLCVs	INTEGER
	acLogicalDs3ThresholdNEDayPCVs	INTEGER
	acLogicalDs3ThresholdNEDayLESs	INTEGER
	acLogicalDs3ThresholdNEDayCCVs	INTEGER
	acLogicalDs3ThresholdNEDayCESs	INTEGER
	acLogicalDs3ThresholdNEDayCSESs	INTEGER
	acLogicalDs3ThresholdFEIntervalCESs	INTEGER
	acLogicalDs3ThresholdFEIntervalCSESs	INTEGER
	acLogicalDs3ThresholdFEIntervalCCVs	INTEGER
	acLogicalDs3ThresholdFEIntervalUASs	INTEGER
	acLogicalDs3ThresholdFEDayCESs	INTEGER
	acLogicalDs3ThresholdFEDayCSESs	INTEGER
	acLogicalDs3ThresholdFEDayCCVs	INTEGER
	acLogicalDs3ThresholdFEDayUASs	INTEGER

Defined Values

acLogicalDs3		1.3.6.1.4.1.2785.2.4.3
The is the MIB module that describes DS3 interfaces and objects for Appian Communications OSAP2k platforms.
MODULE-IDENTITY

acLogicalDs3ConfigTable		1.3.6.1.4.1.2785.2.4.3.1
The Appian Logical DS3 Configuration table. This table is created by the EMS or CLI.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AcDs3ConfigEntry

acLogicalDs3ConfigEntry		1.3.6.1.4.1.2785.2.4.3.1.1
An entry in the Appian Logical DS3 Configuration table.
Status: current	Access: not-accessible
OBJECT-TYPE
	AcDs3ConfigEntry

acLogicalDs3ConfigNodeId		1.3.6.1.4.1.2785.2.4.3.1.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcNodeId

acLogicalDs3ConfigIndex		1.3.6.1.4.1.2785.2.4.3.1.1.2
This value for this object is equal to the value of index from the Time Slot Table that this DS3 corresponds. The number can be a value between 1 and 65535 (64k - 1).
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER

acLogicalDs3ConfigAdminStatus		1.3.6.1.4.1.2785.2.4.3.1.1.3
Appian Administrative Status attribute used to set the provisioning state as either activate(1), inactivate(2) or delete(3). Refer to the Appian-SMI.mib file for additional information.
Status: current	Access: read-create
OBJECT-TYPE
	AcAdminStatus

acLogicalDs3ConfigTimeElapsedInterval		1.3.6.1.4.1.2785.2.4.3.1.1.4
The number of seconds that have elapsed since the beginning of the near end current error measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..899

acLogicalDs3ConfigValidIntervals		1.3.6.1.4.1.2785.2.4.3.1.1.5
The number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute near end intervals since the interface has been online.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..96

acLogicalDs3ConfigTimeElapsedDay		1.3.6.1.4.1.2785.2.4.3.1.1.6
The number of seconds that have elapsed since the beginning of the near end current day error measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..86399

acLogicalDs3ConfigValidDays		1.3.6.1.4.1.2785.2.4.3.1.1.7
The number of previous near end intervals for which data was collected. The value will be 30 unless the interface was brought online within the last 30 days, in which case the value will be the number of complete 24 hour near end days since the interface has been online.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..30

acLogicalDs3ConfigTimeElapsedFarEndInterval		1.3.6.1.4.1.2785.2.4.3.1.1.8
The number of seconds that have elapsed since the beginning of the far end current error-measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..899

acLogicalDs3ConfigValidFarEndIntervals		1.3.6.1.4.1.2785.2.4.3.1.1.9
The number of previous far end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute far end intervals since the interface has been online.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..96

acLogicalDs3ConfigTimeElapsedFarEndDay		1.3.6.1.4.1.2785.2.4.3.1.1.10
The number of seconds that have elapsed since the beginning of the far end current day error measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current day exceeds the maximum value, the agent will return the maximum value.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..86399

acLogicalDs3ConfigValidFarEndDays		1.3.6.1.4.1.2785.2.4.3.1.1.11
The number of previous far end days for which data was collected. The value will be 30 unless the interface was brought online within the last 30 days, in which case the value will be the number of complete 24 hour far end days since the interface has been online.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..30

acLogicalDs3ConfigSendCode		1.3.6.1.4.1.2785.2.4.3.1.1.12
This variable indicates what type of code is being sent across the DS3 interface by the device. Setting this variable causes the interface to begin sending the code requested. The values mean: ds3SendNoCode sending looped or normal data ds3SendLineCode sending a request for a line loopback ds3SendPayloadCode sending a request for a payload loopback (i.e., all DS1s in a DS3 frame) ds3SendResetCode sending a loopback deactivation request ds3SendTestPattern sending a test pattern.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	ds3SendNoCode(1), ds3SendLineCode(2), ds3SendPayloadCode(3), ds3SendResetCode(4), ds3SendTestPattern(5)

acLogicalDs3ConfigCircuitIdentifier		1.3.6.1.4.1.2785.2.4.3.1.1.13
This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..255)

acLogicalDs3ConfigLoopbackConfig		1.3.6.1.4.1.2785.2.4.3.1.1.14
This variable represents the desired loopback configuration of the DS3 interface. The values mean: ds3NoLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as its value. ds3PayloadLoop The received signal at this interface is looped through the device. Typically the received signal is looped back for retransmission after it has passed through the device's framing function. ds3LineLoop The received signal at this interface does not go through the device (minimum penetration) but is looped back out. ds3OtherLoop Loopbacks that are not defined here. ds3InwardLoop The sent signal at this interface is looped back through the device.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	ds3NoLoop(1), ds3PayloadLoop(2), ds3LineLoop(3), ds3OtherLoop(4), ds3InwardLoop(5)

acLogicalDs3ConfigLineStatus		1.3.6.1.4.1.2785.2.4.3.1.1.15
This variable indicates the Line Status of the interface. It contains loopback state information and failure state information. The ds3LineStatus is a bit map represented as a sum, therefore, it can represent multiple failures and a loopback (see acDs3LoopbackConfig object for the type of loopback) simultaneously. The acDs3NoAlarm must be set if and only if no other flag is set. If the acDs3ConfigloopbackState bit is set, the loopback in effect can be determined from the acDs3loopbackConfig object. The various bit positions are: 1 ds3NoAlarm No alarm present 2 ds3RcvRAIFailure Receiving Yellow/Remote Alarm Indication 4 ds3XmitRAIAlarm Transmitting Yellow/Remote Alarm Indication 8 ds3RcvAIS Receiving AIS failure state 16 ds3XmitAIS Transmitting AIS 32 ds3LOF Receiving LOF failure state 64 ds3LOS Receiving LOS failure state 128 ds3LoopbackState Looping the received signal 256 ds3RcvTestCode Receiving a Test Pattern 512 ds3OtherFailure any line status not defined here 1024 ds3UnavailSigState Near End in Unavailable Signal State 2048 ds3NetEquipOOS Carrier Equipment Out of Service
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..4095

acLogicalDs3ConfigTransmitClockSource		1.3.6.1.4.1.2785.2.4.3.1.1.16
The source of Transmit Clock. For logicalDs3, the clock source will be throughTiming. loopTiming indicates that the recovered receive clock is used as the transmit clock. localTiming indicates that a local clock source is used or that an external clock is attached to the box containing the interface. throughTiming indicates that transmit clock is derived from the recovered receive clock of another DS3 interface.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	loopTiming(1), localTiming(2), throughTiming(3)

acLogicalDs3ConfigInvalidIntervals		1.3.6.1.4.1.2785.2.4.3.1.1.17
The number of intervals in the range from 0 to acLogicalDs3ConfigValidIntervals for which no data is available. This object will typically be zero.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..96

acLogicalDs3ConfigInvalidDays		1.3.6.1.4.1.2785.2.4.3.1.1.18
The number of days in the range from 0 to acLogicalDs3ConfigValidDays for which no data is available. This object will typically be zero.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..30

acLogicalDs3ConfigInvalidFarEndIntervals		1.3.6.1.4.1.2785.2.4.3.1.1.19
The number of intervals in the range from 0 to acLogicalDs3ConfigValidFarEndIntervals for which no data is available. This object will typically be zero.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..96

acLogicalDs3ConfigInvalidFarEndDays		1.3.6.1.4.1.2785.2.4.3.1.1.20
The number of days in the range from 0 to acLogicalDs3ConfigValidFarEndDays for which no data is available. This object will typically be zero.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..30

acLogicalDs3ConfigLineStatusLastChange		1.3.6.1.4.1.2785.2.4.3.1.1.21
The value of MIB II's sysUpTime object at the time this DS3 entered its current line status state. If the current state was entered prior to the last re-initialization of the proxy-agent, then this object contains a zero value.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

acLogicalDs3ConfigLineStatusChangeTrapEnable		1.3.6.1.4.1.2785.2.4.3.1.1.22
Indicates whether acDs3ConfigLineStatusChange traps should be generated for this interface.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

acLogicalDs3ConfigLoopbackStatus		1.3.6.1.4.1.2785.2.4.3.1.1.23
This variable represents the current state of the loopback on the DS3 interface. It contains information about loopbacks established by a manager and remotely from the far end. The acLogicalDs3ConfigLoopbackStatus is a bit map represented as a sum, therefore is can represent multiple loopbacks simultaneously. The various bit positions are: 1 ds3NoLoopback 2 ds3NearEndPayloadLoopback 4 ds3NearEndLineLoopback 8 ds3NearEndOtherLoopback 16 ds3NearEndInwardLoopback 32 ds3FarEndPayloadLoopback 64 ds3FarEndLineLoopback
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..127

acLogicalDs3ConfigFarEndEquipCode		1.3.6.1.4.1.2785.2.4.3.1.1.24
This is the Far End Equipment Identification code that describes the specific piece of equipment. It is sent within the Path Identification Message (C-bits) from the remote end.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..10)

acLogicalDs3ConfigFarEndLocationIDCode		1.3.6.1.4.1.2785.2.4.3.1.1.25
This is the Far End Location Identification code that describes the specific location of the equipment. It is sent within the Path Identification Message (C-bits) from the remote end.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..11)

acLogicalDs3ConfigFarEndFrameIDCode		1.3.6.1.4.1.2785.2.4.3.1.1.26
This is the Far End Frame Identification code that identifies where the equipment is located within a building at a given location. It is sent within the Path Identification Message (C-bits) from the remote end.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..10)

acLogicalDs3ConfigFarEndUnitCode		1.3.6.1.4.1.2785.2.4.3.1.1.27
This is the Far End code that identifies the equipment location within a bay. It is sent within the Path Identification Message (C-bits) from the remote end.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..6)

acLogicalDs3ConfigFarEndFacilityIDCode		1.3.6.1.4.1.2785.2.4.3.1.1.28
This code identifies a specific Far End DS3 path. It is sent within the Path Identification Message (C-bits) from the remote end.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..38)

acLogicalDs3IntervalTable		1.3.6.1.4.1.2785.2.4.3.2
The Appian Logical DS3 Interval Table contains various statistics collected by the DS3 Interface over the previous 24 hours of operation as well as over the current period. The past 24 hours are broken into 96 completed 15 minute intervals. The first row in this table (identified by acLogicalDs3IntervalNumber=1) represents the current interval statistics. The next 96 rows of this table (represented by acLogicalDs3IntervalNubmer=2..97) represents one of the past 15 minute intervals. The final row (identified by acLogicalDs3IntervalNumber=98) is the total of all the past intervals (2..97). This table is created automatically. This table is created automatically.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AcDs3IntervalEntry

acLogicalDs3IntervalEntry		1.3.6.1.4.1.2785.2.4.3.2.1
An entry in the Appian Logical DS3 Interval table.
Status: current	Access: not-accessible
OBJECT-TYPE
	AcDs3IntervalEntry

acLogicalDs3IntervalNodeId		1.3.6.1.4.1.2785.2.4.3.2.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcNodeId

acLogicalDs3IntervalIndex		1.3.6.1.4.1.2785.2.4.3.2.1.2
The index value which uniquely identifies the DS3 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an acLogicalDs3Index object instance.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER

acLogicalDs3IntervalNumber		1.3.6.1.4.1.2785.2.4.3.2.1.3
A number between 1 and 98, where 1 is the current 15 minute interval in progress, 2 is the most recently completed 15 minute interval and 97 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 2, and 98 is the total of all the completed intervals (2..97).
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	1..98

acLogicalDs3IntervalValidStats		1.3.6.1.4.1.2785.2.4.3.2.1.4
This variable indicates if the data for this interval is valid.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

acLogicalDs3IntervalResetStats		1.3.6.1.4.1.2785.2.4.3.2.1.5
This variable allows the data from the current interval (acLogicalDs3IntervalIndex=1) to be reset. The acLogicalDs3IntervalValidStats will be set to False after the reset for the current interval. This field has no effect on acLogicalDs3IntervalIndex=2..98. This field will always show a value of False when read.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

acLogicalDs3IntervalPESs		1.3.6.1.4.1.2785.2.4.3.2.1.6
The counter associated with the number of P-bit Errored Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acLogicalDs3IntervalPSESs		1.3.6.1.4.1.2785.2.4.3.2.1.7
The counter associated with the number of P-bit Severely Errored Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acLogicalDs3IntervalSEFSs		1.3.6.1.4.1.2785.2.4.3.2.1.8
The counter associated with the number of Severely Errored Framing Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acLogicalDs3IntervalUASs		1.3.6.1.4.1.2785.2.4.3.2.1.9
The counter associated with the number of Unavailable Seconds. This object may decrease if the occurance of unavailable seconds occurs across an inteval boundary.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acLogicalDs3IntervalLCVs		1.3.6.1.4.1.2785.2.4.3.2.1.10
The counter associated with the number of Line Coding Violations.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acLogicalDs3IntervalPCVs		1.3.6.1.4.1.2785.2.4.3.2.1.11
The counter associated with the number of P-bit Coding Violations.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acLogicalDs3IntervalLESs		1.3.6.1.4.1.2785.2.4.3.2.1.12
The number of Line Errored Seconds (BPVs or illegal zero sequences).
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acLogicalDs3IntervalCCVs		1.3.6.1.4.1.2785.2.4.3.2.1.13
The number of C-bit Coding Violations.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acLogicalDs3IntervalCESs		1.3.6.1.4.1.2785.2.4.3.2.1.14
The number of C-bit Errored Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acLogicalDs3IntervalCSESs		1.3.6.1.4.1.2785.2.4.3.2.1.15
The number of C-bit Severely Errored Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acLogicalDs3DayTable		1.3.6.1.4.1.2785.2.4.3.3
The Appian Logical DS3 Day Table contains various statistics collected by the DS3 Interface over the previous 30 days of operation as well as over the current day period. The first row in this table (identified by acLogicalDs3DayNumber=1) represents the current day statistics. The next 30 rows of this table (represented by acLogicalDs3DayNubmer=2..31) represents one of the 24 hour day intervals. This table is created automatically.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AcDs3DayEntry

acLogicalDs3DayEntry		1.3.6.1.4.1.2785.2.4.3.3.1
An entry in the Appian Logical DS3 Day table.
Status: current	Access: not-accessible
OBJECT-TYPE
	AcDs3DayEntry

acLogicalDs3DayNodeId		1.3.6.1.4.1.2785.2.4.3.3.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcNodeId

acLogicalDs3DayIndex		1.3.6.1.4.1.2785.2.4.3.3.1.2
The index value which uniquely identifies the DS3 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an acLogicalDs3Index object instance.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER

acLogicalDs3DayNumber		1.3.6.1.4.1.2785.2.4.3.3.1.3
A number between 1 and 31, where 1 is the current 24 hour day interval in progress, 2 is the most recently completed 24 hour day interval and 31 is the 24 hour day interval completed 29 days prior to interval 2.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	1..31

acLogicalDs3DayValidStats		1.3.6.1.4.1.2785.2.4.3.3.1.4
This variable indicates if the data for this interval is valid.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

acLogicalDs3DayResetStats		1.3.6.1.4.1.2785.2.4.3.3.1.5
This variable allows the data from the day (acLogicalDs3DayIndex=1) to be reset. The acLogicalDs3DayValidStats will be set to False after the reset for the current day. This field has no effect on acLogicalDs3DayIndex=2..31. This field will always show a value of False when read.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

acLogicalDs3DayPESs		1.3.6.1.4.1.2785.2.4.3.3.1.6
The counter associated with the number of P-bit Errored Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acLogicalDs3DayPSESs		1.3.6.1.4.1.2785.2.4.3.3.1.7
The counter associated with the number of P-bit Severely Errored Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acLogicalDs3DaySEFSs		1.3.6.1.4.1.2785.2.4.3.3.1.8
The counter associated with the number of Severely Errored Framing Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acLogicalDs3DayUASs		1.3.6.1.4.1.2785.2.4.3.3.1.9
The counter associated with the number of Unavailable Seconds. This object may decrease if the occurance of unavailable seconds occurs across an inteval boundary.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acLogicalDs3DayLCVs		1.3.6.1.4.1.2785.2.4.3.3.1.10
The counter associated with the number of Line Coding Violations.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acLogicalDs3DayPCVs		1.3.6.1.4.1.2785.2.4.3.3.1.11
The counter associated with the number of P-bit Coding Violations.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acLogicalDs3DayLESs		1.3.6.1.4.1.2785.2.4.3.3.1.12
The number of Line Errored Seconds (BPVs or illegal zero sequences).
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acLogicalDs3DayCCVs		1.3.6.1.4.1.2785.2.4.3.3.1.13
The number of C-bit Coding Violations.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acLogicalDs3DayCESs		1.3.6.1.4.1.2785.2.4.3.3.1.14
The number of C-bit Errored Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acLogicalDs3DayCSESs		1.3.6.1.4.1.2785.2.4.3.3.1.15
The number of C-bit Severely Errored Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acLogicalDs3FarEndIntervalTable		1.3.6.1.4.1.2785.2.4.3.5
The Appian Logical DS3 Far End Interval Table contains various statistics collected by each DS3 Interface over the previous 24 hours of operation as well as over the current period. The past 24 hours are broken into 96 completed 15 minute intervals. The first row in this table (identified by acLogicalDs3FarEndIntervalNumber=1) represents the current interval statistics. The next 96 rows in this table (represented by acLogicalDs3FarEndIntervalNumber=2..97) represents one of the past 15 minute intervals. The final row (identified by acLogicalDs3FarEndIntervalNumber=98) is the total of all the past intervals (2..97). This table is created automatically.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AcDs3FarEndIntervalEntry

acLogicalDs3FarEndIntervalEntry		1.3.6.1.4.1.2785.2.4.3.5.1
An entry in the DS3 Far End Interval table.
Status: current	Access: not-accessible
OBJECT-TYPE
	AcDs3FarEndIntervalEntry

acLogicalDs3FarEndIntervalNodeId		1.3.6.1.4.1.2785.2.4.3.5.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcNodeId

acLogicalDs3FarEndIntervalIndex		1.3.6.1.4.1.2785.2.4.3.5.1.2
The index value which uniquely identifies the DS3 interface to which this entry is applicable. The interface identified by a particular value of this index is identical to the interface identified by the same value of acLogicalDs3Index.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER

acLogicalDs3FarEndIntervalNumber		1.3.6.1.4.1.2785.2.4.3.5.1.3
A number between 1 and 96, where 1 is the current 15 minute interval in progress, 2 is the most recently completed 15 minute interval and 97 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 2, and 98 is the total of all completed intervals (2..97).
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	1..98

acLogicalDs3FarEndIntervalValidStats		1.3.6.1.4.1.2785.2.4.3.5.1.4
This variable indicates if the data for this interval is valid.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

acLogicalDs3FarEndIntervalResetStats		1.3.6.1.4.1.2785.2.4.3.5.1.5
This variable allows the data for the current interval (acLogicalDs3FarEndIntervalIndex=1) to be reset. The acSdx3FarEndIntervalValidStats will be set to False after the reset for the current interval. This field has no effect on acLogicalDs3FarEndIntervalIndex 2..98. This field will always show a value of false when read.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

acLogicalDs3FarEndIntervalCESs		1.3.6.1.4.1.2785.2.4.3.5.1.6
The counter associated with the number of Far End C-bit Errored Seconds encountered by a DS3 interface. In the case where the agent is a proxy and data is not available, return noSuchInstance.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acLogicalDs3FarEndIntervalCSESs		1.3.6.1.4.1.2785.2.4.3.5.1.7
The counter associated with the number of Far End C-bit Severely Errored Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acLogicalDs3FarEndIntervalCCVs		1.3.6.1.4.1.2785.2.4.3.5.1.8
The counter associated with the number of Far End C-bit Coding Violations reported via the far end block error count.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acLogicalDs3FarEndIntervalUASs		1.3.6.1.4.1.2785.2.4.3.5.1.9
The counter associated with the number of Far End unavailable seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acLogicalDs3FarEndDayTable		1.3.6.1.4.1.2785.2.4.3.6
The Appian Logical DS3 Far End Day Table contains various statistics collected by each DS3 Interface over the previous 30 days of operation as well as over the current period. The first row in this table (identified by acLogicalDs3FarEndDayNumber=1) represents the current day statistics. The next 30 rows in this table (represented by acLogicalDs3FarEndDayNumber=2..31) represents one of the past 24 hour days. This table is created automatically.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AcDs3FarEndDayEntry

acLogicalDs3FarEndDayEntry		1.3.6.1.4.1.2785.2.4.3.6.1
An entry in the DS3 Far End Day table.
Status: current	Access: not-accessible
OBJECT-TYPE
	AcDs3FarEndDayEntry

acLogicalDs3FarEndDayNodeId		1.3.6.1.4.1.2785.2.4.3.6.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcNodeId

acLogicalDs3FarEndDayIndex		1.3.6.1.4.1.2785.2.4.3.6.1.2
The index value which uniquely identifies the DS3 interface to which this entry is applicable. The interface identified by a particular value of this index is identical to the interface identified by the same value of acLogicalDs3Index.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER

acLogicalDs3FarEndDayNumber		1.3.6.1.4.1.2785.2.4.3.6.1.3
A number between 1 and 31, where 1 is the current 24 hour day interval in progress, 2 is the most recently completed 24 hour day and 31 is the 24 hour day 29 days prior to interval 2.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	1..31

acLogicalDs3FarEndDayValidStats		1.3.6.1.4.1.2785.2.4.3.6.1.4
This variable indicates if the data for this interval is valid.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

acLogicalDs3FarEndDayResetStats		1.3.6.1.4.1.2785.2.4.3.6.1.5
This variable allows the data for the current interval (acLogicalDs3FarEndDayIndex=1) to be reset. The acLogicalDs3FarEndDayValidStats will be set to False after the reset for the current day. This field has no effect on acLogicalDs3FarEndDayIndex 2..31. This field will always show a vluae of false when read.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

acLogicalDs3FarEndDayCESs		1.3.6.1.4.1.2785.2.4.3.6.1.6
The counter associated with the number of Far End C-bit Errored Seconds encountered by a DS3 interface. In the case where the agent is a proxy and data is not available, return noSuchInstance.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acLogicalDs3FarEndDayCSESs		1.3.6.1.4.1.2785.2.4.3.6.1.7
The counter associated with the number of Far End C-bit Severely Errored Seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acLogicalDs3FarEndDayCCVs		1.3.6.1.4.1.2785.2.4.3.6.1.8
The counter associated with the number of Far End C-bit Coding Violations reported via the far end block error count.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acLogicalDs3FarEndDayUASs		1.3.6.1.4.1.2785.2.4.3.6.1.9
The counter associated with the number of Far End unavailable seconds.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

acLogicalDs3ThresholdTable		1.3.6.1.4.1.2785.2.4.3.7
The Appian Logical DS3 Threshold Table allows the user to configure the threshold values for each of the statistics found in the interval table base on the 15 minute interval on the day. This table is created automatically.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AcDs3ThresholdEntry

acLogicalDs3ThresholdEntry		1.3.6.1.4.1.2785.2.4.3.7.1
An entry in the Appian DS1 Threshold table.
Status: current	Access: not-accessible
OBJECT-TYPE
	AcDs3ThresholdEntry

acLogicalDs3ThresholdNodeId		1.3.6.1.4.1.2785.2.4.3.7.1.1
The node id is the id for this specific node in the OSAP ring.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AcNodeId

acLogicalDs3ThresholdIndex		1.3.6.1.4.1.2785.2.4.3.7.1.2
The index value which uniquely identifies the DS3 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value as a acLogicalDs3Index object instance.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER

acLogicalDs3ThresholdNEIntervalPESs		1.3.6.1.4.1.2785.2.4.3.7.1.3
The threshold value for near end interval number of P-bit Errored Seconds. A value of 0 disables the threshold for this error.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acLogicalDs3ThresholdNEIntervalPSESs		1.3.6.1.4.1.2785.2.4.3.7.1.4
The threshold value for the near end interval number of P-Bit Severely Errored Seconds. A value of 0 disables the threshold for this error.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acLogicalDs3ThresholdNEIntervalSEFSs		1.3.6.1.4.1.2785.2.4.3.7.1.5
The threshold for the near end interval number of Severely Errored Framing Seconds. A value of 0 disables the threshold for this error.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acLogicalDs3ThresholdNEIntervalUASs		1.3.6.1.4.1.2785.2.4.3.7.1.6
The threshold for the near end interval number of Unavailable Seconds. A value of 0 disables the threshold for this error.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acLogicalDs3ThresholdNEIntervalLCVs		1.3.6.1.4.1.2785.2.4.3.7.1.7
The threshold for the near end interval number of Controlled Slip Seconds. A value of 0 disables the threshold for this error.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acLogicalDs3ThresholdNEIntervalPCVs		1.3.6.1.4.1.2785.2.4.3.7.1.8
The threshold for the near end interval number of Path Coding Violations. A value of 0 disables the threshold for this error.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acLogicalDs3ThresholdNEIntervalLESs		1.3.6.1.4.1.2785.2.4.3.7.1.9
The threshold value for the near end interval number of Line Errored Seconds. A value of 0 disables the threshold for this error.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acLogicalDs3ThresholdNEIntervalCCVs		1.3.6.1.4.1.2785.2.4.3.7.1.10
The threshold for the near end interval number of C-Bit Coding Violations. A value of 0 disables the threshold for this error.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acLogicalDs3ThresholdNEIntervalCESs		1.3.6.1.4.1.2785.2.4.3.7.1.11
The threshold for the near end interval number of C-Bit Errored Seconds. A value of 0 disables the threshold for this error.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acLogicalDs3ThresholdNEIntervalCSESs		1.3.6.1.4.1.2785.2.4.3.7.1.12
The threshold for the near end interval number of C-Bit Severely Errored Seconds. A value of 0 disables the threshold for this error.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acLogicalDs3ThresholdNEDayPESs		1.3.6.1.4.1.2785.2.4.3.7.1.13
The threshold value for near end day number of P-Bit Errored Seconds. A value of 0 disables the threshold for this error.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acLogicalDs3ThresholdNEDayPSESs		1.3.6.1.4.1.2785.2.4.3.7.1.14
The threshold for the near end day number of P-Bit Severely Errored Seconds. A value of 0 disables the threshold for this error.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acLogicalDs3ThresholdNEDaySEFSs		1.3.6.1.4.1.2785.2.4.3.7.1.15
The threshold value for the near end day number of Severely Errored Framing Seconds. A value of 0 disables the threshold for this error.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acLogicalDs3ThresholdNEDayUASs		1.3.6.1.4.1.2785.2.4.3.7.1.16
The threshold value for the near end day number of Unavailable Seconds. A value of 0 disables the threshold for this error.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acLogicalDs3ThresholdNEDayLCVs		1.3.6.1.4.1.2785.2.4.3.7.1.17
The threshold for the near end day number of Line Coding Violations. A value of 0 disables the threshold for this error.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acLogicalDs3ThresholdNEDayPCVs		1.3.6.1.4.1.2785.2.4.3.7.1.18
The threshold value for the near end day number of Path Coding Violations. A value of 0 disables the threshold for this error.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acLogicalDs3ThresholdNEDayLESs		1.3.6.1.4.1.2785.2.4.3.7.1.19
The threshold for the near end day number of Line Errored Seconds. A value of 0 disables the threshold for this error.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acLogicalDs3ThresholdNEDayCCVs		1.3.6.1.4.1.2785.2.4.3.7.1.20
The threshold for the near end day number of C-Bit Coding Violations. A value of 0 disables the threshold for this error.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acLogicalDs3ThresholdNEDayCESs		1.3.6.1.4.1.2785.2.4.3.7.1.21
The threshold for the near end day number of C-Bit Errored Seconds. A value of 0 disables the threshold for this error.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acLogicalDs3ThresholdNEDayCSESs		1.3.6.1.4.1.2785.2.4.3.7.1.22
The threshold for the near end day number of C-Bit Severely Errored Seconds. A value of 0 disables the threshold for this error.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acLogicalDs3ThresholdFEIntervalCESs		1.3.6.1.4.1.2785.2.4.3.7.1.23
The threshold for the far end interval counter associated with the number of Far End C-bit Errored Seconds. A value of 0 disables the threshold for this error.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acLogicalDs3ThresholdFEIntervalCSESs		1.3.6.1.4.1.2785.2.4.3.7.1.24
The threshold for the far end interval counter associated with the number of Far End C-bit Severely Errored Seconds. A value of 0 disables the threshold for this error.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acLogicalDs3ThresholdFEIntervalCCVs		1.3.6.1.4.1.2785.2.4.3.7.1.25
The threshold for the far end interval counter associated with the number of Far End C-bit Coding Violations reported via the far end block error count. A value of 0 disables the threshold for this error.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acLogicalDs3ThresholdFEIntervalUASs		1.3.6.1.4.1.2785.2.4.3.7.1.26
The threshold for the far end interval counter associated with the number of Far End unavailable seconds. A value of 0 disables the threshold for this error.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acLogicalDs3ThresholdFEDayCESs		1.3.6.1.4.1.2785.2.4.3.7.1.27
The threshold for the far end day counter associated with the number of Far End C-bit Errored Seconds. A value of 0 disables the threshold for this error.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acLogicalDs3ThresholdFEDayCSESs		1.3.6.1.4.1.2785.2.4.3.7.1.28
The threshold for the far end day counter associated with the number of Far End C-bit Severely Errored Seconds. A value of 0 disables the threshold for this error.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acLogicalDs3ThresholdFEDayCCVs		1.3.6.1.4.1.2785.2.4.3.7.1.29
The threshold for the far end day counter associated with the number of Far End C-bit Coding Violations reported via the far end block error count. A value of 0 disables the threshold for this error.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acLogicalDs3ThresholdFEDayUASs		1.3.6.1.4.1.2785.2.4.3.7.1.30
The threshold for the far end day counter associated with the number of Far End unavailable seconds. A value of 0 disables the threshold for this error.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

acLogicalDs3Traps		1.3.6.1.4.1.2785.2.4.3.0
OBJECT IDENTIFIER

acLogicalDs3LineStatusChangeTrap		1.3.6.1.4.1.2785.2.4.3.0.1
An acLogcialDs3LineStatusChange trap is sent when the value of an instance acLogicalDs3ConfigLineStatus changes. It can be utilized by an NMS to trigger polls.
Status: current	Access: read-write
NOTIFICATION-TYPE

acLogicalDs3StatsResetTrap		1.3.6.1.4.1.2785.2.4.3.0.2
The Logical Ds3 statistics for this interface have been reset to zero (0) which may effect long term trending functions monitoring this interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acLogicalDs3CfgErrorTrap		1.3.6.1.4.1.2785.2.4.3.0.3
A configuration request to the Logical Ds3 configuration table for an interface has been detected as invalid or corrupt.
Status: current	Access: read-write
NOTIFICATION-TYPE

acLogicalDs3LinkDownTrap		1.3.6.1.4.1.2785.2.4.3.0.4
The link for this ds3 interface has obtained sync.
Status: current	Access: read-write
NOTIFICATION-TYPE

acLogicalDs3LinkUpTrap		1.3.6.1.4.1.2785.2.4.3.0.5
The link for this ds3 interface has lost sync.
Status: current	Access: read-write
NOTIFICATION-TYPE

acLogicalDs3ExceededThresholdNEIntervalPESsTrap		1.3.6.1.4.1.2785.2.4.3.0.6
The threshold value has been exceeded for the specified interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acLogicalDs3ExceededThresholdNEIntervalPSESsTrap		1.3.6.1.4.1.2785.2.4.3.0.7
The threshold value has been exceeded for the specified interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acLogicalDs3ExceededThresholdNEIntervalSEFSsTrap		1.3.6.1.4.1.2785.2.4.3.0.8
The threshold value has been exceeded for the specified interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acLogicalDs3ExceededThresholdNEIntervalUASsTrap		1.3.6.1.4.1.2785.2.4.3.0.9
The threshold value has been exceeded for the specified interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acLogicalDs3ExceededThresholdNEIntervalLCVsTrap		1.3.6.1.4.1.2785.2.4.3.0.10
The threshold value has been exceeded for the specified interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acLogicalDs3ExceededThresholdNEIntervalPCVsTrap		1.3.6.1.4.1.2785.2.4.3.0.11
The threshold value has been exceeded for the specified interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acLogicalDs3ExceededThresholdNEIntervalLESsTrap		1.3.6.1.4.1.2785.2.4.3.0.12
The threshold value has been exceeded for the specified interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acLogicalDs3ExceededThresholdNEIntervalCCVsTrap		1.3.6.1.4.1.2785.2.4.3.0.13
The threshold value has been exceeded for the specified interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acLogicalDs3ExceededThresholdNEIntervalCESsTrap		1.3.6.1.4.1.2785.2.4.3.0.14
The threshold value has been exceeded for the specified interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acLogicalDs3ExceededThresholdNEIntervalCSESsTrap		1.3.6.1.4.1.2785.2.4.3.0.15
The threshold value has been exceeded for the specified interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acLogicalDs3ExceededThresholdNEDayPESsTrap		1.3.6.1.4.1.2785.2.4.3.0.16
The threshold value has been exceeded for the specified interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acLogicalDs3ExceededThresholdNEDayPSESsTrap		1.3.6.1.4.1.2785.2.4.3.0.17
The threshold value has been exceeded for the specified interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acLogicalDs3ExceededThresholdNEDaySEFSsTrap		1.3.6.1.4.1.2785.2.4.3.0.18
The threshold value has been exceeded for the specified interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acLogicalDs3ExceededThresholdNEDayUASsTrap		1.3.6.1.4.1.2785.2.4.3.0.19
The threshold value has been exceeded for the specified interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acLogicalDs3ExceededThresholdNEDayLCVsTrap		1.3.6.1.4.1.2785.2.4.3.0.20
The threshold value has been exceeded for the specified interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acLogicalDs3ExceededThresholdNEDayPCVsTrap		1.3.6.1.4.1.2785.2.4.3.0.21
The threshold value has been exceeded for the specified interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acLogicalDs3ExceededThresholdNEDayLESsTrap		1.3.6.1.4.1.2785.2.4.3.0.22
The threshold value has been exceeded for the specified interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acLogicalDs3ExceededThresholdNEDayCCVsTrap		1.3.6.1.4.1.2785.2.4.3.0.23
The threshold value has been exceeded for the specified interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acLogicalDs3ExceededThresholdNEDayCESsTrap		1.3.6.1.4.1.2785.2.4.3.0.24
The threshold value has been exceeded for the specified interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acLogicalDs3ExceededThresholdNEDayCSESsTrap		1.3.6.1.4.1.2785.2.4.3.0.25
The threshold value has been exceeded for the specified interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acLogicalDs3ExceededThresholdFEIntervalCESsTrap		1.3.6.1.4.1.2785.2.4.3.0.26
The threshold value has been exceeded for the specified interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acLogicalDs3ExceededThresholdFEIntervalCSESsTrap		1.3.6.1.4.1.2785.2.4.3.0.27
The threshold value has been exceeded for the specified interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acLogicalDs3ExceededThresholdFEIntervalCCVsTrap		1.3.6.1.4.1.2785.2.4.3.0.28
The threshold value has been exceeded for the specified interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acLogicalDs3ExceededThresholdFEIntervalUASsTrap		1.3.6.1.4.1.2785.2.4.3.0.29
The threshold value has been exceeded for the specified interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acLogicalDs3ExceededThresholdFEDayCESsTrap		1.3.6.1.4.1.2785.2.4.3.0.30
The threshold value has been exceeded for the specified interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acLogicalDs3ExceededThresholdFEDayCSESsTrap		1.3.6.1.4.1.2785.2.4.3.0.31
The threshold value has been exceeded for the specified interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acLogicalDs3ExceededThresholdFEDayCCVsTrap		1.3.6.1.4.1.2785.2.4.3.0.32
The threshold value has been exceeded for the specified interface.
Status: current	Access: read-write
NOTIFICATION-TYPE

acLogicalDs3ExceededThresholdFEDayUASsTrap		1.3.6.1.4.1.2785.2.4.3.0.33
The threshold value has been exceeded for the specified interface.
Status: current	Access: read-write
NOTIFICATION-TYPE