ANS-GS-MIB

File: ANS-GS-MIB.mib (80017 bytes)

Imported modules

SNMPv2-SMI RFC1213-MIB ANS-COMMON-MIB
ANS-EQUIPMENT-MIB

Imported symbols

OBJECT-TYPE IpAddress DisplayString
RowPointer RowStatus mlpmpR115
DateAndTime ansBoardSystemNodeIndex ansBoardSubrackIndex
ansBoardPosition

Defined Types

AnsPortType  
INTEGER atm(1), ethernet(2), other(3), e1(4), ds1(5)    

AnsCCType  
INTEGER vpc(1), vcc(2)    

AnsCCServiceClass  
INTEGER cbr1(1), cbr2(2), ubr(3)    

AnsCCSourceType  
INTEGER normal(1), epd(2)    

AnsCCMulti  
INTEGER ptp(1), ptmp(2)    

AnsCCAdminStatus  
INTEGER unlocked(1), locked(2)    

AnsAal1ParsType  
INTEGER unstructured(1), structured-contiguous(2), structured-free(3)    

AnsAal1ParsTcMode  
INTEGER undefined(-1), immediate(1), deleyed(2)    

AnsAal1ParsTcType  
INTEGER undefined(-1), service-specific(1), ds0ais(2)    

AnsAccessUserPortEntry  
SEQUENCE    
  ansAccessUserPortSystemNode INTEGER
  ansAccessUserPortSubrack INTEGER
  ansAccessUserPortPosition INTEGER
  ansAccessUserPortIndex INTEGER
  ansAccessUserPortType INTEGER
  ansAccessUserPortMaxBwDs INTEGER
  ansAccessUserPortMaxBwUs INTEGER
  ansAccessUserPortAvailBwDs INTEGER
  ansAccessUserPortAvailBwUs INTEGER
  ansAccessUserPortMinVpi INTEGER
  ansAccessUserPortMaxVpi INTEGER
  ansAccessUserPortMinVci INTEGER
  ansAccessUserPortMaxVci INTEGER
  ansAccessUserPortLabel DisplayString
  ansAccessUserPortOperStatus INTEGER
  ansAccessUserPortAdminStatus INTEGER
  ansAccessUserPortUsageState INTEGER
  ansAccessUserPortAtmFormat INTEGER

AnsAccessServicePortEntry  
SEQUENCE    
  ansAccessServicePortSystemNode INTEGER
  ansAccessServicePortSubrack INTEGER
  ansAccessServicePortPosition INTEGER
  ansAccessServicePortIndex INTEGER
  ansAccessServicePortLabel DisplayString
  ansAccessServicePortMaxBwDs INTEGER
  ansAccessServicePortMaxBwUs INTEGER
  ansAccessServicePortAvailBwDs INTEGER
  ansAccessServicePortAvailBwUs INTEGER
  ansAccessServicePortMinVpi INTEGER
  ansAccessServicePortMaxVpi INTEGER
  ansAccessServicePortMinVci INTEGER
  ansAccessServicePortMaxVci INTEGER
  ansAccessServicePortOperStatus INTEGER
  ansAccessServicePortAdminStatus INTEGER
  ansAccessServicePortUsageState INTEGER
  ansAccessServicePortAtmFormat INTEGER
  ansAccessServicePortType INTEGER

AnsAtmCreateCCEntry  
SEQUENCE    
  ansAtmCCAUPSystemNode INTEGER
  ansAtmCCAUPSubrack INTEGER
  ansAtmCCAUPPosition INTEGER
  ansAtmCCAUPIndex INTEGER
  ansAtmCCAUPVPI INTEGER
  ansAtmCCAUPVCI INTEGER
  ansAtmCCASPSubrack INTEGER
  ansAtmCCASPPosition INTEGER
  ansAtmCCASPIndex INTEGER
  ansAtmCCASPVPI INTEGER
  ansAtmCCASPVCI INTEGER
  ansAtmCCType INTEGER
  ansAtmCCServiceClass INTEGER
  ansAtmCCSourceType INTEGER
  ansAtmCCServiceType INTEGER
  ansAtmCCPcrAtoB INTEGER
  ansAtmCCPcrBtoA INTEGER
  ansAtmCCMulti INTEGER
  ansAtmCCAdminStatus INTEGER
  ansAtmCCRowStatus RowStatus

AnsCeAtmCreateCCEntry  
SEQUENCE    
  ansCeAtmCCAUPSystemNode INTEGER
  ansCeAtmCCAUPSubrack INTEGER
  ansCeAtmCCAUPPosition INTEGER
  ansCeAtmCCAUPIndex INTEGER
  ansCeAtmCCAUPVPI INTEGER
  ansCeAtmCCAUPVCI INTEGER
  ansCeAtmCCASPSubrack INTEGER
  ansCeAtmCCASPPosition INTEGER
  ansCeAtmCCASPIndex INTEGER
  ansCeAtmCCASPVPI INTEGER
  ansCeAtmCCASPVCI INTEGER
  ansCeAtmCCType INTEGER
  ansCeAtmCCServiceClass INTEGER
  ansCeAtmCCSourceType INTEGER
  ansCeAtmCCPcrAtoB INTEGER
  ansCeAtmCCPcrBtoA INTEGER
  ansCeAtmCCMulti INTEGER
  ansCeAtmCCAdminStatus INTEGER
  ansCeAtmCCTimeSlotPa DisplayString
  ansCeAtmCCTypePa INTEGER
  ansCeAtmCCFillLevelPa INTEGER
  ansCeAtmCCCdvtPa INTEGER
  ansCeAtmCCMaxBuffSizePa INTEGER
  ansCeAtmCCTcModePa INTEGER
  ansCeAtmCCTcTypePa INTEGER
  ansCeAtmCCTcBtoAPa INTEGER
  ansCeAtmCCTcAtoBPa INTEGER
  ansCeAtmCCRowStatus RowStatus

AnsCeCeCreateCCEntry  
SEQUENCE    
  ansCeCeCCAUPSystemNode INTEGER
  ansCeCeCCAUPSubrack INTEGER
  ansCeCeCCAUPPosition INTEGER
  ansCeCeCCAUPIndex INTEGER
  ansCeCeCCAUPVPI INTEGER
  ansCeCeCCAUPVCI INTEGER
  ansCeCeCCASPSubrack INTEGER
  ansCeCeCCASPPosition INTEGER
  ansCeCeCCASPIndex INTEGER
  ansCeCeCCASPVPI INTEGER
  ansCeCeCCASPVCI INTEGER
  ansCeCeCCType INTEGER
  ansCeCeCCServiceClass INTEGER
  ansCeCeCCSourceType INTEGER
  ansCeCeCCPcrAtoB INTEGER
  ansCeCeCCPcrBtoA INTEGER
  ansCeCeCCMulti INTEGER
  ansCeCeCCAdminStatus INTEGER
  ansCeCeCCTimeSlotPa DisplayString
  ansCeCeCCTypePa INTEGER
  ansCeCeCCFillLevelPa INTEGER
  ansCeCeCCCdvtPa INTEGER
  ansCeCeCCMaxBuffSizePa INTEGER
  ansCeCeCCTcModePa INTEGER
  ansCeCeCCTcTypePa INTEGER
  ansCeCeCCTcBtoAPa INTEGER
  ansCeCeCCTcAtoBPa INTEGER
  ansCeCeCCTimeSlotPb DisplayString
  ansCeCeCCTypePb INTEGER
  ansCeCeCCFillLevelPb INTEGER
  ansCeCeCCCdvtPb INTEGER
  ansCeCeCCMaxBuffSizePb INTEGER
  ansCeCeCCTcModePb INTEGER
  ansCeCeCCTcTypePb INTEGER
  ansCeCeCCTcBtoAPb INTEGER
  ansCeCeCCTcAtoBPb INTEGER
  ansCeCeCCRowStatus RowStatus

AnsCrossConnectEntry  
SEQUENCE    
  ansCCAUPSystemNode INTEGER
  ansCCAUPSubrack INTEGER
  ansCCAUPPosition INTEGER
  ansCCAUPIndex INTEGER
  ansCCAUPVPI INTEGER
  ansCCAUPVCI INTEGER
  ansCCASPSubrack INTEGER
  ansCCASPPosition INTEGER
  ansCCASPIndex INTEGER
  ansCCASPVPI INTEGER
  ansCCASPVCI INTEGER
  ansCCType INTEGER
  ansCCServiceClass INTEGER
  ansCCPcrAtoB INTEGER
  ansCCPcrBtoA INTEGER
  ansCCSourceType INTEGER
  ansCCServiceType INTEGER
  ansCCOperStatus INTEGER
  ansCCLastOperStatusChange DateAndTime
  ansCCAdminStatus INTEGER
  ansCCMulti INTEGER
  ansCCRowStatus RowStatus

AnsApplDataEntry  
SEQUENCE    
  ansApplDataSystemNode INTEGER
  ansApplDataSubrack INTEGER
  ansApplDataPosition INTEGER
  ansApplDataIndex INTEGER
  ansApplDataVPI INTEGER
  ansApplDataVCI INTEGER
  ansApplDataOpState INTEGER
  ansApplDataAdminState INTEGER
  ansApplDataServiceParams INTEGER

AnsAal1ParsEntry  
SEQUENCE    
  ansAal1ParsTimeSlot DisplayString
  ansAal1ParsType INTEGER
  ansAal1ParsFillLevel INTEGER
  ansAal1ParsCdvt INTEGER
  ansAal1ParsMaxBuffSize INTEGER
  ansAal1ParsTcMode INTEGER
  ansAal1ParsTcType INTEGER
  ansAal1ParsTcBtoA INTEGER
  ansAal1ParsTcAtoB INTEGER

AnsEthParsEntry  
SEQUENCE    
  ansEthParsPcrShaping INTEGER

EthernetPortEntry  
SEQUENCE    
  ethernetPortFcsEncapsulation INTEGER
  ethernetPortMuxOrEncapsulation INTEGER
  ethernetPortIpAddress IpAddress
  ethernetPortType INTEGER
  ethernetPortOperatingMode INTEGER

AnsAccessServiceUserPortEntry  
SEQUENCE    
  ansAccessServiceUserPortSystemNode INTEGER
  ansAccessServiceUserPortSubrack INTEGER
  ansAccessServiceUserPortPosition INTEGER
  ansAccessServiceUserPortIndex INTEGER
  ansAccessServiceUserPortLabel DisplayString
  ansAccessServiceUserPortMaxBwDs INTEGER
  ansAccessServiceUserPortMaxBwUs INTEGER
  ansAccessServiceUserPortAvailBwDs INTEGER
  ansAccessServiceUserPortAvailBwUs INTEGER
  ansAccessServiceUserPortMinVpi INTEGER
  ansAccessServiceUserPortMaxVpi INTEGER
  ansAccessServiceUserPortMinVci INTEGER
  ansAccessServiceUserPortMaxVci INTEGER
  ansAccessServiceUserPortOperStatus INTEGER
  ansAccessServiceUserPortAdminStatus INTEGER
  ansAccessServiceUserPortUsageState INTEGER
  ansAccessServiceUserPortAtmFormat INTEGER
  ansAccessServiceUserPortType INTEGER

AnsAccessInternalPortEntry  
SEQUENCE    
  ansAccessInternalPortSystemNode INTEGER
  ansAccessInternalPortSubrack INTEGER
  ansAccessInternalPortPosition INTEGER
  ansAccessInternalPortIndex INTEGER
  ansAccessInternalPortLabel DisplayString
  ansAccessInternalPortMaxBwDs INTEGER
  ansAccessInternalPortMaxBwUs INTEGER
  ansAccessInternalPortAvailBwDs INTEGER
  ansAccessInternalPortAvailBwUs INTEGER
  ansAccessInternalPortMinVpi INTEGER
  ansAccessInternalPortMaxVpi INTEGER
  ansAccessInternalPortMinVci INTEGER
  ansAccessInternalPortMaxVci INTEGER
  ansAccessInternalPortOperStatus INTEGER
  ansAccessInternalPortAdminStatus INTEGER
  ansAccessInternalPortUsageState INTEGER
  ansAccessInternalPortAtmFormat INTEGER
  ansAccessInternalPortType INTEGER

PDHPortEntry  
SEQUENCE    
  pdhPortPort INTEGER
  pdhPortTsUsed DisplayString
  pdhPortClockMode INTEGER
  pdhPortHaulMode INTEGER
  pdhPortLineCode INTEGER
  pdhPortLoopback INTEGER
  pdhPortCas INTEGER
  pdhPortFrameFormat INTEGER
  pdhPortServiceType INTEGER

AnsTerminalIdEntry  
SEQUENCE    
  ansTerminalIdIdent DisplayString
  ansTerminalIdSystemNode INTEGER
  ansTerminalIdSubrack INTEGER
  ansTerminalIdPosition INTEGER

Defined Values

connections 1.3.6.1.4.1.193.96.115.4
OBJECT IDENTIFIER    

accessUserPort 1.3.6.1.4.1.193.96.115.4.1
OBJECT IDENTIFIER    

accessServicePort 1.3.6.1.4.1.193.96.115.4.2
OBJECT IDENTIFIER    

accessServiceUserPort 1.3.6.1.4.1.193.96.115.4.3
OBJECT IDENTIFIER    

accessInternalPort 1.3.6.1.4.1.193.96.115.4.4
OBJECT IDENTIFIER    

ansAtmCreateCC 1.3.6.1.4.1.193.96.115.4.5
OBJECT IDENTIFIER    

ansCeAtmCreateCC 1.3.6.1.4.1.193.96.115.4.6
OBJECT IDENTIFIER    

ansCeCeCreateCC 1.3.6.1.4.1.193.96.115.4.7
OBJECT IDENTIFIER    

ansCrossConnect 1.3.6.1.4.1.193.96.115.4.8
OBJECT IDENTIFIER    

ansApplData 1.3.6.1.4.1.193.96.115.4.9
OBJECT IDENTIFIER    

ansAal1Pars 1.3.6.1.4.1.193.96.115.4.10
OBJECT IDENTIFIER    

ansEthPars 1.3.6.1.4.1.193.96.115.4.11
OBJECT IDENTIFIER    

ethernetPort 1.3.6.1.4.1.193.96.115.4.12
OBJECT IDENTIFIER    

pdhPort 1.3.6.1.4.1.193.96.115.4.13
OBJECT IDENTIFIER    

terminalId 1.3.6.1.4.1.193.96.115.4.14
OBJECT IDENTIFIER    

ansAccessUserPortTable 1.3.6.1.4.1.193.96.115.4.1.1
Entries in the ansAccessUserPortTable represents the physical ATM interface towards the STU located in the NIU and will be of type 'ATM'.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AnsAccessUserPortEntry

ansAccessUserPortEntry 1.3.6.1.4.1.193.96.115.4.1.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AnsAccessUserPortEntry  

ansAccessUserPortSystemNode 1.3.6.1.4.1.193.96.115.4.1.1.1.1
Reference to the system node the user port is contained within.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessUserPortSubrack 1.3.6.1.4.1.193.96.115.4.1.1.1.2
Reference to the subrack the user port belongs to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessUserPortPosition 1.3.6.1.4.1.193.96.115.4.1.1.1.3
Reference to the board the user port belongs to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessUserPortIndex 1.3.6.1.4.1.193.96.115.4.1.1.1.4
Reference to the interface within the board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessUserPortType 1.3.6.1.4.1.193.96.115.4.1.1.1.5
Indicates the type of physical interface that is connected to the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AnsPortType  

ansAccessUserPortMaxBwDs 1.3.6.1.4.1.193.96.115.4.1.1.1.6
Maximum cell rate this port is capable of in the downstream direction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessUserPortMaxBwUs 1.3.6.1.4.1.193.96.115.4.1.1.1.7
Maximum cell rate this port is capable of in the upstream direction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessUserPortAvailBwDs 1.3.6.1.4.1.193.96.115.4.1.1.1.8
Available bandwidth in cells per second over the port in the downstream direction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessUserPortAvailBwUs 1.3.6.1.4.1.193.96.115.4.1.1.1.9
Available bandwidth in cells per second over the port in the upstream direction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessUserPortMinVpi 1.3.6.1.4.1.193.96.115.4.1.1.1.10
The smallest VPI accepted in both directions through this user port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessUserPortMaxVpi 1.3.6.1.4.1.193.96.115.4.1.1.1.11
The largest VPI accepted in both directions through this user port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessUserPortMinVci 1.3.6.1.4.1.193.96.115.4.1.1.1.12
The smallest VCI accepted in both directions through this user port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessUserPortMaxVci 1.3.6.1.4.1.193.96.115.4.1.1.1.13
The largest VCI accepted in both directions through this user port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessUserPortLabel 1.3.6.1.4.1.193.96.115.4.1.1.1.14
A settable name or description of this user port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

ansAccessUserPortOperStatus 1.3.6.1.4.1.193.96.115.4.1.1.1.15
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ansAccessUserPortAdminStatus 1.3.6.1.4.1.193.96.115.4.1.1.1.16
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unlocked(1), locked(2)  

ansAccessUserPortUsageState 1.3.6.1.4.1.193.96.115.4.1.1.1.17
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), active(2)  

ansAccessUserPortAtmFormat 1.3.6.1.4.1.193.96.115.4.1.1.1.18
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nni(1), uni(2)  

ansAccessServicePortTable 1.3.6.1.4.1.193.96.115.4.2.1
Entries in the ansAccessServicePortTable represents a bidirectional STM1 port in the RF-shelf.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AnsAccessServicePortEntry

ansAccessServicePortEntry 1.3.6.1.4.1.193.96.115.4.2.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AnsAccessServicePortEntry  

ansAccessServicePortSystemNode 1.3.6.1.4.1.193.96.115.4.2.1.1.1
Indicates wich system node the port is contained within.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessServicePortSubrack 1.3.6.1.4.1.193.96.115.4.2.1.1.2
Indicates wich subrack the port is contained within.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessServicePortPosition 1.3.6.1.4.1.193.96.115.4.2.1.1.3
Indicates the slot position within the subrack
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessServicePortIndex 1.3.6.1.4.1.193.96.115.4.2.1.1.4
Indicates physical port index on the board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessServicePortLabel 1.3.6.1.4.1.193.96.115.4.2.1.1.5
Text string that may be used to name the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

ansAccessServicePortMaxBwDs 1.3.6.1.4.1.193.96.115.4.2.1.1.6
Maximum cell rate this port is capable of in the downstream direction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessServicePortMaxBwUs 1.3.6.1.4.1.193.96.115.4.2.1.1.7
Maximum cell rate this port is capable of in the upstream direction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessServicePortAvailBwDs 1.3.6.1.4.1.193.96.115.4.2.1.1.8
Available bandwidth in cells per second over the port in the downstream direction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessServicePortAvailBwUs 1.3.6.1.4.1.193.96.115.4.2.1.1.9
Available bandwidth in cells per second over the port in the upstream direction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessServicePortMinVpi 1.3.6.1.4.1.193.96.115.4.2.1.1.10
The smallest VPI value possible over this port in both directions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessServicePortMaxVpi 1.3.6.1.4.1.193.96.115.4.2.1.1.11
The largest VPI value possible over this port in both directions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessServicePortMinVci 1.3.6.1.4.1.193.96.115.4.2.1.1.12
The smallest VCI value possible over this port in both directions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessServicePortMaxVci 1.3.6.1.4.1.193.96.115.4.2.1.1.13
The largest VCI value possible over this port in both directions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessServicePortOperStatus 1.3.6.1.4.1.193.96.115.4.2.1.1.14
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ansAccessServicePortAdminStatus 1.3.6.1.4.1.193.96.115.4.2.1.1.15
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unlocked(1), locked(2)  

ansAccessServicePortUsageState 1.3.6.1.4.1.193.96.115.4.2.1.1.16
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), active(2)  

ansAccessServicePortAtmFormat 1.3.6.1.4.1.193.96.115.4.2.1.1.17
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nni(1), uni(2)  

ansAccessServicePortType 1.3.6.1.4.1.193.96.115.4.2.1.1.18
Indicates the type of physical interface that is connected to the service port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AnsPortType  

ansAtmCreateCCTable 1.3.6.1.4.1.193.96.115.4.5.1
Entries in the ansAtmCreateCCTable represents ATM VP and VP cross-connections between access user ports and access service ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AnsAtmCreateCCEntry

ansAtmCreateCCEntry 1.3.6.1.4.1.193.96.115.4.5.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AnsAtmCreateCCEntry  

ansAtmCCAUPSystemNode 1.3.6.1.4.1.193.96.115.4.5.1.1.1
Reference to the system node the access user port belongs to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAtmCCAUPSubrack 1.3.6.1.4.1.193.96.115.4.5.1.1.2
Reference to the subrack the access user port belongs to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAtmCCAUPPosition 1.3.6.1.4.1.193.96.115.4.5.1.1.3
Reference to user port's slot position within the subrack.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAtmCCAUPIndex 1.3.6.1.4.1.193.96.115.4.5.1.1.4
Reference to user port's physical interface on the board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAtmCCAUPVPI 1.3.6.1.4.1.193.96.115.4.5.1.1.5
VPI value at the user port. (100001 = any) Assigned by system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAtmCCAUPVCI 1.3.6.1.4.1.193.96.115.4.5.1.1.6
VCI value at the user port. (100000 = undefined) Not applicable. (100001 = any) Assigned by system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAtmCCASPSubrack 1.3.6.1.4.1.193.96.115.4.5.1.1.7
Reference to the subrack the access service port belongs to.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansAtmCCASPPosition 1.3.6.1.4.1.193.96.115.4.5.1.1.8
Reference to access service port port's slot position within the subrack.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansAtmCCASPIndex 1.3.6.1.4.1.193.96.115.4.5.1.1.9
Reference to access service port's physical interface on the board.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansAtmCCASPVPI 1.3.6.1.4.1.193.96.115.4.5.1.1.10
VPI value at the access service port. (100001 = any) Assigned by system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansAtmCCASPVCI 1.3.6.1.4.1.193.96.115.4.5.1.1.11
VCI value at the access service port. (100000 = undefined) Not applicable. (100001 = any) Assigned by system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansAtmCCType 1.3.6.1.4.1.193.96.115.4.5.1.1.12
Indicates if the entry is a VC or VP cross-connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AnsCCType  

ansAtmCCServiceClass 1.3.6.1.4.1.193.96.115.4.5.1.1.13
Indicates ATM bearer service type. cbr1: Highest priority constant bit-rate service, used for circuit emulated POTS. cbr2: Lower priority constant bit-rate service, used for video transmissions. ubr: Lowest priority service, used for datacom.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AnsCCServiceClass  

ansAtmCCSourceType 1.3.6.1.4.1.193.96.115.4.5.1.1.14
Indicates the type of service that is transported on top of the ATM layer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AnsCCSourceType  

ansAtmCCServiceType 1.3.6.1.4.1.193.96.115.4.5.1.1.15
Indicates the type of connection ATM or ETHERNET.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER atm(2), ethernet(3)  

ansAtmCCPcrAtoB 1.3.6.1.4.1.193.96.115.4.5.1.1.16
Bandwidth in cells per second for the cross-connection in the downstream direction. UBR connections may be given any positive cell rate. The -1 indicates the unspecified value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansAtmCCPcrBtoA 1.3.6.1.4.1.193.96.115.4.5.1.1.17
Bandwidth in cells per second for the cross-connection in the upstream direction. UBR connections may be given any positive cell rate. The -1 indicates the unspecified value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansAtmCCMulti 1.3.6.1.4.1.193.96.115.4.5.1.1.18
Indicates if the cross- connection is part of a point-to-point or a point-to-multi point connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AnsCCMulti  

ansAtmCCAdminStatus 1.3.6.1.4.1.193.96.115.4.5.1.1.19
Indicetes the administrative state of the cross-connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AnsCCAdminStatus  

ansAtmCCRowStatus 1.3.6.1.4.1.193.96.115.4.5.1.1.20
Used to create cross-connect. To create a cross-connect ansCCRowStatus must be set to 'createAndGo'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

ansCeAtmCreateCCTable 1.3.6.1.4.1.193.96.115.4.6.1
Entries in the ansCeAtmCreateCCTable represents ATM VP and VP cross-connections between access user ports and access service ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AnsCeAtmCreateCCEntry

ansCeAtmCreateCCEntry 1.3.6.1.4.1.193.96.115.4.6.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AnsCeAtmCreateCCEntry  

ansCeAtmCCAUPSystemNode 1.3.6.1.4.1.193.96.115.4.6.1.1.1
Reference to the system node the access user port belongs to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansCeAtmCCAUPSubrack 1.3.6.1.4.1.193.96.115.4.6.1.1.2
Reference to the subrack the access user port belongs to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansCeAtmCCAUPPosition 1.3.6.1.4.1.193.96.115.4.6.1.1.3
Reference to user port's slot position within the subrack.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansCeAtmCCAUPIndex 1.3.6.1.4.1.193.96.115.4.6.1.1.4
Reference to user port's physical interface on the board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansCeAtmCCAUPVPI 1.3.6.1.4.1.193.96.115.4.6.1.1.5
VPI value at the user port. (100001 = any) Assigned by system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansCeAtmCCAUPVCI 1.3.6.1.4.1.193.96.115.4.6.1.1.6
VCI value at the user port. (100000 = undefined) Not applicable. (100001 = any) Assigned by system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansCeAtmCCASPSubrack 1.3.6.1.4.1.193.96.115.4.6.1.1.7
Reference to the subrack the access service port belongs to.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansCeAtmCCASPPosition 1.3.6.1.4.1.193.96.115.4.6.1.1.8
Reference to access service port port's slot position within the subrack.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansCeAtmCCASPIndex 1.3.6.1.4.1.193.96.115.4.6.1.1.9
Reference to access service port's physical interface on the board.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansCeAtmCCASPVPI 1.3.6.1.4.1.193.96.115.4.6.1.1.10
VPI value at the access service port. (100001 = any) Assigned by system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansCeAtmCCASPVCI 1.3.6.1.4.1.193.96.115.4.6.1.1.11
VCI value at the access service port. (100000 = undefined) Not applicable. (100001 = any) Assigned by system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansCeAtmCCType 1.3.6.1.4.1.193.96.115.4.6.1.1.12
Indicates if the entry is a VC or VP cross-connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AnsCCType  

ansCeAtmCCServiceClass 1.3.6.1.4.1.193.96.115.4.6.1.1.13
Indicates ATM bearer service type. cbr1: Highest priority constant bit-rate service, used for circuit emulated POTS. cbr2: Lower priority constant bit-rate service, used for video transmissions. ubr: Lowest priority service, used for datacom.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AnsCCServiceClass  

ansCeAtmCCSourceType 1.3.6.1.4.1.193.96.115.4.6.1.1.14
Indicates the type of service that is transported on top of the ATM layer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AnsCCSourceType  

ansCeAtmCCPcrAtoB 1.3.6.1.4.1.193.96.115.4.6.1.1.15
Bandwidth in cells per second for the cross-connection in the downstream direction. UBR connections may be given any positive cell rate. The -1 indicetes the unspecified value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansCeAtmCCPcrBtoA 1.3.6.1.4.1.193.96.115.4.6.1.1.16
Bandwidth in cells per second for the cross-connection in the upstream direction. UBR connections may be given any positive cell rate. The -1 indicates the unspecified value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansCeAtmCCMulti 1.3.6.1.4.1.193.96.115.4.6.1.1.17
Indicates if the cross- connection is part of a point-to-point or a point-to-multi point connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AnsCCMulti  

ansCeAtmCCAdminStatus 1.3.6.1.4.1.193.96.115.4.6.1.1.18
Indicetes the administrative state of the cross-connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AnsCCAdminStatus  

ansCeAtmCCTimeSlotPa 1.3.6.1.4.1.193.96.115.4.6.1.1.19
The TS list must have the format: [int1,int2,...]. not_used (unstructured)
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

ansCeAtmCCTypePa 1.3.6.1.4.1.193.96.115.4.6.1.1.20
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  AnsAal1ParsType  

ansCeAtmCCFillLevelPa 1.3.6.1.4.1.193.96.115.4.6.1.1.21
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansCeAtmCCCdvtPa 1.3.6.1.4.1.193.96.115.4.6.1.1.22
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansCeAtmCCMaxBuffSizePa 1.3.6.1.4.1.193.96.115.4.6.1.1.23
(-1) undefined
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansCeAtmCCTcModePa 1.3.6.1.4.1.193.96.115.4.6.1.1.24
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  AnsAal1ParsTcMode  

ansCeAtmCCTcTypePa 1.3.6.1.4.1.193.96.115.4.6.1.1.25
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  AnsAal1ParsTcType  

ansCeAtmCCTcBtoAPa 1.3.6.1.4.1.193.96.115.4.6.1.1.26
(-1) undefined
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansCeAtmCCTcAtoBPa 1.3.6.1.4.1.193.96.115.4.6.1.1.27
(-1) undefined
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansCeAtmCCRowStatus 1.3.6.1.4.1.193.96.115.4.6.1.1.28
Used to create cross-connect. To create a cross-connect ansCCRowStatus must be set to 'createAndGo'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

ansCeCeCreateCCTable 1.3.6.1.4.1.193.96.115.4.7.1
Entries in the ansCeCeCreateCCTable represents ATM VP and VP cross-connections between access user ports and access service ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AnsCeCeCreateCCEntry

ansCeCeCreateCCEntry 1.3.6.1.4.1.193.96.115.4.7.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AnsCeCeCreateCCEntry  

ansCeCeCCAUPSystemNode 1.3.6.1.4.1.193.96.115.4.7.1.1.1
Reference to the system node the access user port belongs to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansCeCeCCAUPSubrack 1.3.6.1.4.1.193.96.115.4.7.1.1.2
Reference to the subrack the access user port belongs to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansCeCeCCAUPPosition 1.3.6.1.4.1.193.96.115.4.7.1.1.3
Reference to user port's slot position within the subrack.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansCeCeCCAUPIndex 1.3.6.1.4.1.193.96.115.4.7.1.1.4
Reference to user port's physical interface on the board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansCeCeCCAUPVPI 1.3.6.1.4.1.193.96.115.4.7.1.1.5
VPI value at the user port. (100001 = any) Assigned by system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansCeCeCCAUPVCI 1.3.6.1.4.1.193.96.115.4.7.1.1.6
VCI value at the user port. (100000 = undefined) Not applicable. (100001 = any) Assigned by system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansCeCeCCASPSubrack 1.3.6.1.4.1.193.96.115.4.7.1.1.7
Reference to the subrack the access service port belongs to.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansCeCeCCASPPosition 1.3.6.1.4.1.193.96.115.4.7.1.1.8
Reference to access service port port's slot position within the subrack.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansCeCeCCASPIndex 1.3.6.1.4.1.193.96.115.4.7.1.1.9
Reference to access service port's physical interface on the board.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansCeCeCCASPVPI 1.3.6.1.4.1.193.96.115.4.7.1.1.10
VPI value at the access service port. (100001 = any) Assigned by system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansCeCeCCASPVCI 1.3.6.1.4.1.193.96.115.4.7.1.1.11
VCI value at the access service port. (100000 = undefined) Not applicable. (100001 = any) Assigned by system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansCeCeCCType 1.3.6.1.4.1.193.96.115.4.7.1.1.12
Indicates if the entry is a VC or VP cross-connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AnsCCType  

ansCeCeCCServiceClass 1.3.6.1.4.1.193.96.115.4.7.1.1.13
Indicates ATM bearer service type. cbr1: Highest priority constant bit-rate service, used for circuit emulated POTS. cbr2: Lower priority constant bit-rate service, used for video transmissions. ubr: Lowest priority service, used for datacom.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AnsCCServiceClass  

ansCeCeCCSourceType 1.3.6.1.4.1.193.96.115.4.7.1.1.14
Indicates the type of service that is transported on top of the ATM layer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AnsCCSourceType  

ansCeCeCCPcrAtoB 1.3.6.1.4.1.193.96.115.4.7.1.1.15
Bandwidth in cells per second for the cross-connection in the downstream direction. UBR connections may be given any positive cell rate. The -1 indicetes the unspecified value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansCeCeCCPcrBtoA 1.3.6.1.4.1.193.96.115.4.7.1.1.16
Bandwidth in cells per second for the cross-connection in the upstream direction. UBR connections may be given any positive cell rate. The -1 indicates the unspecified value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansCeCeCCMulti 1.3.6.1.4.1.193.96.115.4.7.1.1.17
Indicates if the cross- connection is part of a point-to-point or a point-to-multi point connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AnsCCMulti  

ansCeCeCCAdminStatus 1.3.6.1.4.1.193.96.115.4.7.1.1.18
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  AnsCCAdminStatus  

ansCeCeCCTimeSlotPa 1.3.6.1.4.1.193.96.115.4.7.1.1.19
The TS list must have the format: [int1,int2,...]. not_used (unstructured)
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

ansCeCeCCTypePa 1.3.6.1.4.1.193.96.115.4.7.1.1.20
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  AnsAal1ParsType  

ansCeCeCCFillLevelPa 1.3.6.1.4.1.193.96.115.4.7.1.1.21
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansCeCeCCCdvtPa 1.3.6.1.4.1.193.96.115.4.7.1.1.22
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansCeCeCCMaxBuffSizePa 1.3.6.1.4.1.193.96.115.4.7.1.1.23
(-1) undefined
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansCeCeCCTcModePa 1.3.6.1.4.1.193.96.115.4.7.1.1.24
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  AnsAal1ParsTcMode  

ansCeCeCCTcTypePa 1.3.6.1.4.1.193.96.115.4.7.1.1.25
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  AnsAal1ParsTcType  

ansCeCeCCTcBtoAPa 1.3.6.1.4.1.193.96.115.4.7.1.1.26
(-1) undefined
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansCeCeCCTcAtoBPa 1.3.6.1.4.1.193.96.115.4.7.1.1.27
(-1) undefined
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansCeCeCCTimeSlotPb 1.3.6.1.4.1.193.96.115.4.7.1.1.28
The TS list must have the format: [int1,int2,...]. not_used (unstructured)
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

ansCeCeCCTypePb 1.3.6.1.4.1.193.96.115.4.7.1.1.29
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  AnsAal1ParsType  

ansCeCeCCFillLevelPb 1.3.6.1.4.1.193.96.115.4.7.1.1.30
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansCeCeCCCdvtPb 1.3.6.1.4.1.193.96.115.4.7.1.1.31
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansCeCeCCMaxBuffSizePb 1.3.6.1.4.1.193.96.115.4.7.1.1.32
(-1) undefined
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansCeCeCCTcModePb 1.3.6.1.4.1.193.96.115.4.7.1.1.33
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  AnsAal1ParsTcMode  

ansCeCeCCTcTypePb 1.3.6.1.4.1.193.96.115.4.7.1.1.34
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  AnsAal1ParsTcType  

ansCeCeCCTcBtoAPb 1.3.6.1.4.1.193.96.115.4.7.1.1.35
(-1) undefined
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansCeCeCCTcAtoBPb 1.3.6.1.4.1.193.96.115.4.7.1.1.36
(-1) undefined
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansCeCeCCRowStatus 1.3.6.1.4.1.193.96.115.4.7.1.1.37
Used to create cross-connect. To create a cross-connect ansCCRowStatus must be set to 'createAndGo'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

ansCrossConnectTable 1.3.6.1.4.1.193.96.115.4.8.1
Entries in the ansCrossConnectTable represents ATM VP and VP cross-connections between access user ports and access service ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AnsCrossConnectEntry

ansCrossConnectEntry 1.3.6.1.4.1.193.96.115.4.8.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AnsCrossConnectEntry  

ansCCAUPSystemNode 1.3.6.1.4.1.193.96.115.4.8.1.1.1
Reference to the system node the access user port belongs to.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

ansCCAUPSubrack 1.3.6.1.4.1.193.96.115.4.8.1.1.2
Reference to the subrack the access user port belongs to.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

ansCCAUPPosition 1.3.6.1.4.1.193.96.115.4.8.1.1.3
Reference to user port's slot position within the subrack.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

ansCCAUPIndex 1.3.6.1.4.1.193.96.115.4.8.1.1.4
Reference to user port's physical interface on the board.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

ansCCAUPVPI 1.3.6.1.4.1.193.96.115.4.8.1.1.5
VPI value at the user port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

ansCCAUPVCI 1.3.6.1.4.1.193.96.115.4.8.1.1.6
VCI value at the user port. (100000 = undefined) Not applicable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

ansCCASPSubrack 1.3.6.1.4.1.193.96.115.4.8.1.1.7
Reference to the subrack the access service port belongs to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansCCASPPosition 1.3.6.1.4.1.193.96.115.4.8.1.1.8
Reference to access service port port's slot position within the subrack.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansCCASPIndex 1.3.6.1.4.1.193.96.115.4.8.1.1.9
Reference to access service port's physical interface on the board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansCCASPVPI 1.3.6.1.4.1.193.96.115.4.8.1.1.10
VPI value at the access service port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansCCASPVCI 1.3.6.1.4.1.193.96.115.4.8.1.1.11
VCI value at the access service port. (100000 = undefined) Not applicable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansCCType 1.3.6.1.4.1.193.96.115.4.8.1.1.12
Indicates if the entry is a VC or VP cross-connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AnsCCType  

ansCCServiceClass 1.3.6.1.4.1.193.96.115.4.8.1.1.13
Indicates ATM bearer service type. cbr1: Highest priority constant bit-rate service, used for circuit emulated POTS. cbr2: Lower priority constant bit-rate service, used for video transmissions. ubr: Lowest priority service, used for datacom.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AnsCCServiceClass  

ansCCPcrAtoB 1.3.6.1.4.1.193.96.115.4.8.1.1.14
Bandwidth in cells per second for the cross-connection in the downstream direction. UBR connections may be given any positive cell rate. The -1 indicates unspecified value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansCCPcrBtoA 1.3.6.1.4.1.193.96.115.4.8.1.1.15
Bandwidth in cells per second for the cross-connection in the upstream direction. UBR connections may be given any positive cell rate. The -1 indicates unspecified value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansCCSourceType 1.3.6.1.4.1.193.96.115.4.8.1.1.16
Indicates the type of service that is transported on top of the ATM layer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AnsCCSourceType  

ansCCServiceType 1.3.6.1.4.1.193.96.115.4.8.1.1.17
Indicates the type of connection CE, ATM or ETHERNET.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ce(1), atm(2), ethernet(3)  

ansCCOperStatus 1.3.6.1.4.1.193.96.115.4.8.1.1.18
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ansCCLastOperStatusChange 1.3.6.1.4.1.193.96.115.4.8.1.1.19
The time this VP cross-connect entered its current operational state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DateAndTime  

ansCCAdminStatus 1.3.6.1.4.1.193.96.115.4.8.1.1.20
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  AnsCCAdminStatus  

ansCCMulti 1.3.6.1.4.1.193.96.115.4.8.1.1.21
Indicates if the cross- connection is part of a point-to-point or a point-to-multi point connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AnsCCMulti  

ansCCRowStatus 1.3.6.1.4.1.193.96.115.4.8.1.1.22
Used to delete cross-connect. A cross-connection is removed by seting the attribute to 'destroy'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

ansApplDataTable 1.3.6.1.4.1.193.96.115.4.9.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AnsApplDataEntry

ansApplDataEntry 1.3.6.1.4.1.193.96.115.4.9.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AnsApplDataEntry  

ansApplDataSystemNode 1.3.6.1.4.1.193.96.115.4.9.1.1.1
Reference to the system node the access user port belongs to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansApplDataSubrack 1.3.6.1.4.1.193.96.115.4.9.1.1.2
Reference to the subrack the access user port belongs to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansApplDataPosition 1.3.6.1.4.1.193.96.115.4.9.1.1.3
Reference to user port's slot position within the subrack.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansApplDataIndex 1.3.6.1.4.1.193.96.115.4.9.1.1.4
Reference to user port's physical interface on the board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansApplDataVPI 1.3.6.1.4.1.193.96.115.4.9.1.1.5
VPI value at the user port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansApplDataVCI 1.3.6.1.4.1.193.96.115.4.9.1.1.6
VCI value at the user port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansApplDataOpState 1.3.6.1.4.1.193.96.115.4.9.1.1.7
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

ansApplDataAdminState 1.3.6.1.4.1.193.96.115.4.9.1.1.8
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER locked(1), unlocked(2)  

ansApplDataServiceParams 1.3.6.1.4.1.193.96.115.4.9.1.1.9
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER undefined(-1), aal1(1), ethernet(2)  

ansAal1ParsTable 1.3.6.1.4.1.193.96.115.4.10.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AnsAal1ParsEntry

ansAal1ParsEntry 1.3.6.1.4.1.193.96.115.4.10.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AnsAal1ParsEntry  

ansAal1ParsTimeSlot 1.3.6.1.4.1.193.96.115.4.10.1.1.1
The TS list has the format: [int1,int2,...]. not_used (unstructured)
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ansAal1ParsType 1.3.6.1.4.1.193.96.115.4.10.1.1.2
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER undefined(-1), unstructured(1), structured-contiguous(2), structured-free(3)  

ansAal1ParsFillLevel 1.3.6.1.4.1.193.96.115.4.10.1.1.3
(-1) undefined
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAal1ParsCdvt 1.3.6.1.4.1.193.96.115.4.10.1.1.4
(-1) undefined
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansAal1ParsMaxBuffSize 1.3.6.1.4.1.193.96.115.4.10.1.1.5
(-1) undefined
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ansAal1ParsTcMode 1.3.6.1.4.1.193.96.115.4.10.1.1.6
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER undefined(-1), immediate(1), deleyed(2)  

ansAal1ParsTcType 1.3.6.1.4.1.193.96.115.4.10.1.1.7
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER undefined(-1), service-specific(1), ds0ais(2)  

ansAal1ParsTcBtoA 1.3.6.1.4.1.193.96.115.4.10.1.1.8
(-1) undefined
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAal1ParsTcAtoB 1.3.6.1.4.1.193.96.115.4.10.1.1.9
(-1) undefined
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansEthParsTable 1.3.6.1.4.1.193.96.115.4.11.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AnsEthParsEntry

ansEthParsEntry 1.3.6.1.4.1.193.96.115.4.11.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AnsEthParsEntry  

ansEthParsPcrShaping 1.3.6.1.4.1.193.96.115.4.11.1.1.1
(-1) unspecified.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ethernetPortTable 1.3.6.1.4.1.193.96.115.4.12.1
Entries in the ethernetPortTable represents extension records of the ethernet ports in the ansAccessUserPortTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetPortEntry

ethernetPortEntry 1.3.6.1.4.1.193.96.115.4.12.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  EthernetPortEntry  

ethernetPortFcsEncapsulation 1.3.6.1.4.1.193.96.115.4.12.1.1.1
Turn the sending off FCS checksum on or off.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

ethernetPortMuxOrEncapsulation 1.3.6.1.4.1.193.96.115.4.12.1.1.2
Reference to transfer of ethernet frames.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER vcBasedMultiplexing(1), llcEncapsulation(2)  

ethernetPortIpAddress 1.3.6.1.4.1.193.96.115.4.12.1.1.3
IP adress of the NT when attribute ethernetPortMuxOrEncapsulation is set to pppVc or pppLlc
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ethernetPortType 1.3.6.1.4.1.193.96.115.4.12.1.1.4
Ethernet Type
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER base10(1), base100(2)  

ethernetPortOperatingMode 1.3.6.1.4.1.193.96.115.4.12.1.1.5
Ethernet Type
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER base10(1), base100(2)  

ansAccessServiceUserPortTable 1.3.6.1.4.1.193.96.115.4.3.1
Entries in the ansAccessServiceUserPortTable represents a bidirectional STM1 port in the RF-shelf.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AnsAccessServiceUserPortEntry

ansAccessServiceUserPortEntry 1.3.6.1.4.1.193.96.115.4.3.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AnsAccessServiceUserPortEntry  

ansAccessServiceUserPortSystemNode 1.3.6.1.4.1.193.96.115.4.3.1.1.1
Indicates wich system node the port is contained within.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessServiceUserPortSubrack 1.3.6.1.4.1.193.96.115.4.3.1.1.2
Indicates wich subrack the port is contained within.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessServiceUserPortPosition 1.3.6.1.4.1.193.96.115.4.3.1.1.3
Indicates the slot position within the subrack
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessServiceUserPortIndex 1.3.6.1.4.1.193.96.115.4.3.1.1.4
Indicates physical port index on the board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessServiceUserPortLabel 1.3.6.1.4.1.193.96.115.4.3.1.1.5
Text string that may be used to name the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

ansAccessServiceUserPortMaxBwDs 1.3.6.1.4.1.193.96.115.4.3.1.1.6
Maximum cell rate this port is capable of in the downstream direction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessServiceUserPortMaxBwUs 1.3.6.1.4.1.193.96.115.4.3.1.1.7
Maximum cell rate this port is capable of in the upstream direction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessServiceUserPortAvailBwDs 1.3.6.1.4.1.193.96.115.4.3.1.1.8
Available bandwidth in cells per second over the port in the downstream direction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessServiceUserPortAvailBwUs 1.3.6.1.4.1.193.96.115.4.3.1.1.9
Available bandwidth in cells per second over the port in the upstream direction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessServiceUserPortMinVpi 1.3.6.1.4.1.193.96.115.4.3.1.1.10
The smallest VPI value possible over this port in both directions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessServiceUserPortMaxVpi 1.3.6.1.4.1.193.96.115.4.3.1.1.11
The largest VPI value possible over this port in both directions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessServiceUserPortMinVci 1.3.6.1.4.1.193.96.115.4.3.1.1.12
The smallest VCI value possible over this port in both directions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessServiceUserPortMaxVci 1.3.6.1.4.1.193.96.115.4.3.1.1.13
The largest VCI value possible over this port in both directions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessServiceUserPortOperStatus 1.3.6.1.4.1.193.96.115.4.3.1.1.14
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ansAccessServiceUserPortAdminStatus 1.3.6.1.4.1.193.96.115.4.3.1.1.15
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unlocked(1), locked(2)  

ansAccessServiceUserPortUsageState 1.3.6.1.4.1.193.96.115.4.3.1.1.16
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), active(2)  

ansAccessServiceUserPortAtmFormat 1.3.6.1.4.1.193.96.115.4.3.1.1.17
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nni(1), uni(2)  

ansAccessServiceUserPortType 1.3.6.1.4.1.193.96.115.4.3.1.1.18
Indicates the type of physical interface that is connected to the service-user port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AnsPortType  

ansAccessInternalPortTable 1.3.6.1.4.1.193.96.115.4.4.1
Entries in the ansAccessInternalPortTable represents a bidirectional STM1 port
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AnsAccessInternalPortEntry

ansAccessInternalPortEntry 1.3.6.1.4.1.193.96.115.4.4.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AnsAccessInternalPortEntry  

ansAccessInternalPortSystemNode 1.3.6.1.4.1.193.96.115.4.4.1.1.1
Indicates wich system node the port is contained within.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessInternalPortSubrack 1.3.6.1.4.1.193.96.115.4.4.1.1.2
Indicates wich subrack the port is contained within.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessInternalPortPosition 1.3.6.1.4.1.193.96.115.4.4.1.1.3
Indicates the slot position within the subrack
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessInternalPortIndex 1.3.6.1.4.1.193.96.115.4.4.1.1.4
Indicates physical port index on the board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessInternalPortLabel 1.3.6.1.4.1.193.96.115.4.4.1.1.5
Text string that may be used to name the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

ansAccessInternalPortMaxBwDs 1.3.6.1.4.1.193.96.115.4.4.1.1.6
Maximum cell rate this port is capable of in the downstream direction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessInternalPortMaxBwUs 1.3.6.1.4.1.193.96.115.4.4.1.1.7
Maximum cell rate this port is capable of in the upstream direction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessInternalPortAvailBwDs 1.3.6.1.4.1.193.96.115.4.4.1.1.8
Available bandwidth in cells per second over the port in the downstream direction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessInternalPortAvailBwUs 1.3.6.1.4.1.193.96.115.4.4.1.1.9
Available bandwidth in cells per second over the port in the upstream direction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessInternalPortMinVpi 1.3.6.1.4.1.193.96.115.4.4.1.1.10
The smallest VPI value possible over this port in both directions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessInternalPortMaxVpi 1.3.6.1.4.1.193.96.115.4.4.1.1.11
The largest VPI value possible over this port in both directions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessInternalPortMinVci 1.3.6.1.4.1.193.96.115.4.4.1.1.12
The smallest VCI value possible over this port in both directions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessInternalPortMaxVci 1.3.6.1.4.1.193.96.115.4.4.1.1.13
The largest VCI value possible over this port in both directions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansAccessInternalPortOperStatus 1.3.6.1.4.1.193.96.115.4.4.1.1.14
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ansAccessInternalPortAdminStatus 1.3.6.1.4.1.193.96.115.4.4.1.1.15
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unlocked(1), locked(2)  

ansAccessInternalPortUsageState 1.3.6.1.4.1.193.96.115.4.4.1.1.16
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), active(2)  

ansAccessInternalPortAtmFormat 1.3.6.1.4.1.193.96.115.4.4.1.1.17
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nni(1), uni(2)  

ansAccessInternalPortType 1.3.6.1.4.1.193.96.115.4.4.1.1.18
Indicates the type of physical interface that is connected to the internal port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AnsPortType  

pdhPortTable 1.3.6.1.4.1.193.96.115.4.13.1
PDH Port Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PDHPortEntry

pdhPortEntry 1.3.6.1.4.1.193.96.115.4.13.1.1
This entity represents a PDH port for circuit emulation.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PDHPortEntry  

pdhPortPort 1.3.6.1.4.1.193.96.115.4.13.1.1.1
Port at AT and CE board
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pdhPortTsUsed 1.3.6.1.4.1.193.96.115.4.13.1.1.2
Timeslot used
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

pdhPortClockMode 1.3.6.1.4.1.193.96.115.4.13.1.1.3
...
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER synchronous(1), asynchronous(2), looped-asynchronous(3)  

pdhPortHaulMode 1.3.6.1.4.1.193.96.115.4.13.1.1.4
...
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER short(1), long(2)  

pdhPortLineCode 1.3.6.1.4.1.193.96.115.4.13.1.1.5
hdb3 valid for ansAccessUser/ServicePortType = e1 ami valid for ansAccessUser/ServicePortType = ds1 b8zs valid for ansAccessUser/ServicePortType = ds1
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER hdb3(1), ami(2), b8zs(3)  

pdhPortLoopback 1.3.6.1.4.1.193.96.115.4.13.1.1.6
...
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(-1), internal(1), external(2)  

pdhPortCas 1.3.6.1.4.1.193.96.115.4.13.1.1.7
...
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER not-used(-1), cas(1), basic(2)  

pdhPortFrameFormat 1.3.6.1.4.1.193.96.115.4.13.1.1.8
...
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER not-used(-1), sf(1), esf(2), e1-crc(3)  

pdhPortServiceType 1.3.6.1.4.1.193.96.115.4.13.1.1.9
...
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER structured(1), unstructured(2)  

ansTerminalIdTable 1.3.6.1.4.1.193.96.115.4.14.1
Entries in the ansTerminalIdTable represent the system node, subrack and position of ATs; These pieces of information can be used as an index into terminal specific tables to obtain complete information
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AnsTerminalIdEntry

ansTerminalIdEntry 1.3.6.1.4.1.193.96.115.4.14.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AnsTerminalIdEntry  

ansTerminalIdIdent 1.3.6.1.4.1.193.96.115.4.14.1.1.1
An index that uniquely identifies an AT
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(20)  

ansTerminalIdSystemNode 1.3.6.1.4.1.193.96.115.4.14.1.1.2
Reference to the system node the AT belongs to
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansTerminalIdSubrack 1.3.6.1.4.1.193.96.115.4.14.1.1.3
Reference to the subrack the AT belongs to
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ansTerminalIdPosition 1.3.6.1.4.1.193.96.115.4.14.1.1.4
Reference to the slot the AT belongs to
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor