ALTIGA-HARDWARE-STATS-MIB
File:
ALTIGA-HARDWARE-STATS-MIB.mib (22898 bytes)
Imported modules
Imported symbols
Defined Types
ConcentratorCard |
|
Concentrator Card Type. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
none(1), sep(2), dualT1Wan(3), sepE(4) |
|
ConcentratorType |
|
Concentrator Type indicates the chassis type. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
cxx(1), c5(2), c1(3) |
|
Defined Values
altigaHardwareStatsMibModule |
1.3.6.1.4.1.3076.1.1.27.2 |
The Altiga Hardware Statistics MIB models counters and objects that
are of management interest for the hardware.
Acronyms
The following acronyms are used in this document:
CPU: Central Processing Unit
MB: Megabyte
MIB: Management Information Base
PS: Power Supply
RPM: Revolutions Per Minute
SEP: Scalable Encryption Processor
WAN: Wide Area Network
|
MODULE-IDENTITY |
|
|
|
alHardwareCpuVoltage |
1.3.6.1.4.1.3076.2.1.2.22.1.1 |
The current CPU voltage in centivolts. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
alHardwareCpuVoltageAlarm |
1.3.6.1.4.1.3076.2.1.2.22.1.2 |
The alarm status for CPU voltage. This alarm will fired when the CPU
voltage is detected out of configured range. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
alHardwareCpuVoltageTime |
1.3.6.1.4.1.3076.2.1.2.22.1.4 |
The sysUptime at the time of the last change of alarm status for CPU
voltage. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
alHardwarePs1Voltage3v |
1.3.6.1.4.1.3076.2.1.2.22.1.5 |
The current 3V voltage of Power Supply 1 in centivolts. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
alHardwarePs1Voltage3vAlarm |
1.3.6.1.4.1.3076.2.1.2.22.1.6 |
The alarm status for PS1 3v voltage. This alarm will fired when the
3v power supply 1 voltage is detected out of configured range. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
alHardwarePs1Voltage3vTime |
1.3.6.1.4.1.3076.2.1.2.22.1.8 |
The sysUptime at the time of the last change of alarm status for PS1
3v voltage. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
alHardwarePs1Voltage5v |
1.3.6.1.4.1.3076.2.1.2.22.1.9 |
The current 5V voltage of Power Supply 1 in centivolts. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
alHardwarePs1Voltage5vAlarm |
1.3.6.1.4.1.3076.2.1.2.22.1.10 |
The alarm status for PS1 5v voltage. This alarm will fired when the
5v power supply 1 voltage is detected out of configured range. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
alHardwarePs1Voltage5vTime |
1.3.6.1.4.1.3076.2.1.2.22.1.12 |
The sysUptime at the time of the last change of alarm status for PS1
5v voltage. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
alHardwarePs2Voltage3v |
1.3.6.1.4.1.3076.2.1.2.22.1.13 |
The current 3V voltage of Power Supply 2 in centivolts. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
alHardwarePs2Voltage3vAlarm |
1.3.6.1.4.1.3076.2.1.2.22.1.14 |
The alarm status for PS2 3v voltage. This alarm will fired when the
3v power supply 2 voltage is detected out of configured range. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
alHardwarePs2Voltage3vTime |
1.3.6.1.4.1.3076.2.1.2.22.1.16 |
The sysUptime at the time of the last change of alarm status for PS2
3v voltage. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
alHardwarePs2Voltage5v |
1.3.6.1.4.1.3076.2.1.2.22.1.17 |
The current 5V voltage of Power Supply 2 in centivolts. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
alHardwarePs2Voltage5vAlarm |
1.3.6.1.4.1.3076.2.1.2.22.1.18 |
The alarm status for PS2 5v voltage. This alarm will fired when the
5v power supply 2 voltage is detected out of configured range. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
alHardwarePs2Voltage5vTime |
1.3.6.1.4.1.3076.2.1.2.22.1.20 |
The sysUptime at the time of the last change of alarm status for PS2
5v voltage. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
alHardwareBoardVoltage3v |
1.3.6.1.4.1.3076.2.1.2.22.1.21 |
The current 3V voltage of the mainboard in centivolts. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
alHardwareBoardVoltage3vAlarm |
1.3.6.1.4.1.3076.2.1.2.22.1.22 |
The alarm status for the mainboard 3v voltage. This alarm will fired
when the 3v mainboard voltage is detected out of configured range. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
alHardwareBoardVoltage3vTime |
1.3.6.1.4.1.3076.2.1.2.22.1.24 |
The sysUptime at the time of the last change of alarm status for the
mainboard 3v voltage. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
alHardwareBoardVoltage5v |
1.3.6.1.4.1.3076.2.1.2.22.1.25 |
The current 5V voltage of the mainboard in centivolts. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
alHardwareBoardVoltage5vAlarm |
1.3.6.1.4.1.3076.2.1.2.22.1.26 |
The alarm status for the mainboard 5v voltage. This alarm will fired
when the 5v mainboard voltage is detected out of configured range. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
alHardwareBoardVoltage5vTime |
1.3.6.1.4.1.3076.2.1.2.22.1.28 |
The sysUptime at the time of the last change of alarm status for the
mainboard 5v voltage. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
alHardwareCpuTemp |
1.3.6.1.4.1.3076.2.1.2.22.1.29 |
The current CPU temperature in degrees C. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-40..120 |
|
alHardwareCpuTempAlarm |
1.3.6.1.4.1.3076.2.1.2.22.1.30 |
The alarm status for the CPU temperature. This alarm will fired
when the CPU temperature is detected out of configured range. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
alHardwareCpuTempCount |
1.3.6.1.4.1.3076.2.1.2.22.1.31 |
The number of alarm events for the CPU temperature. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alHardwareCpuTempTime |
1.3.6.1.4.1.3076.2.1.2.22.1.32 |
The sysUptime at the time of the last change of alarm status for the
CPU temperature. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
alHardwareCageTemp |
1.3.6.1.4.1.3076.2.1.2.22.1.33 |
The current cage temperature in degrees C. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-40..120 |
|
alHardwareCageTempAlarm |
1.3.6.1.4.1.3076.2.1.2.22.1.34 |
The alarm status for the cage temperature. This alarm will fired
when the cage temperature is detected out of configured range. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
alHardwareCageTempCount |
1.3.6.1.4.1.3076.2.1.2.22.1.35 |
The number of alarm events for the cage temperature. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alHardwareCageTempTime |
1.3.6.1.4.1.3076.2.1.2.22.1.36 |
The sysUptime at the time of the last change of alarm status for the
cage temperature. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
alHardwareFan1Rpm |
1.3.6.1.4.1.3076.2.1.2.22.1.37 |
The current speed of fan 1 in RPM. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
alHardwareFan1RpmAlarm |
1.3.6.1.4.1.3076.2.1.2.22.1.38 |
The alarm status for fan 1 RPM. This alarm will fired when fan 1 RPM
is detected out of configured range. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
alHardwareFan1RpmTime |
1.3.6.1.4.1.3076.2.1.2.22.1.40 |
The sysUptime at the time of the last change of alarm status for
fan 1 RPM. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
alHardwareFan2Rpm |
1.3.6.1.4.1.3076.2.1.2.22.1.41 |
The current speed of fan 2 in RPM. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
alHardwareFan2RpmAlarm |
1.3.6.1.4.1.3076.2.1.2.22.1.42 |
The alarm status for fan 2 RPM. This alarm will fired when fan 2 RPM
is detected out of configured range. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
alHardwareFan2RpmTime |
1.3.6.1.4.1.3076.2.1.2.22.1.44 |
The sysUptime at the time of the last change of alarm status for
fan 2 RPM. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
alHardwareFan3Rpm |
1.3.6.1.4.1.3076.2.1.2.22.1.45 |
The current speed of fan 3 in RPM. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
alHardwareFan3RpmAlarm |
1.3.6.1.4.1.3076.2.1.2.22.1.46 |
The alarm status for fan 3 RPM. This alarm will fired when fan 3 RPM
is detected out of configured range. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
alHardwareFan3RpmTime |
1.3.6.1.4.1.3076.2.1.2.22.1.48 |
The sysUptime at the time of the last change of alarm status for
fan 3 RPM. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
alHardwarePs1Type |
1.3.6.1.4.1.3076.2.1.2.22.1.49 |
The type of power supply for Power Supply slot 1. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), ac(2) |
|
alHardwarePs2Type |
1.3.6.1.4.1.3076.2.1.2.22.1.50 |
The type of power supply for Power Supply slot 2. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), ac(2) |
|
alHardwareRamSize |
1.3.6.1.4.1.3076.2.1.2.22.1.59 |
The amount of memory, in MB on the concentrator. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
alHardwareCpuVoltageNominal |
1.3.6.1.4.1.3076.2.1.2.22.1.61 |
The nominal CPU voltage in centivolts for the concentrator. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
alHardwareClientEthPrivSwitch |
1.3.6.1.4.1.3076.2.1.2.22.1.62 |
Whether or not the 3002 Hardware Client has an Ethernet Switch for
the private interface. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
altigaHardwareStatsMibCompliance |
1.3.6.1.4.1.3076.1.1.27.2.1.1.1 |
The compliance statement for agents which
implement the Altiga Hardware Statistics MIB. |
Status: current |
Access: read-only |
MODULE-COMPLIANCE |
|
|
|
altigaHardwareStatsGroup |
1.3.6.1.4.1.3076.2.1.1.1.22.2 |
The objects for Hardware statistics. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|