ALTEON-TS-PHYSICAL-MIB

File: ALTEON-TS-PHYSICAL-MIB.mib (65077 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
ALTEON-ROOT-MIB ALTEON-TIGON-SWITCH-MIB

Imported symbols

IpAddress Counter Gauge
TimeTicks OBJECT-TYPE PhysAddress
DisplayString switch stats
information agent operCmds

Defined Types

AgPortCurCfgTableEntry  
SEQUENCE    
  agPortCurCfgIndx INTEGER
  agPortCurCfgPrefLink INTEGER
  agPortCurCfgBackLink INTEGER
  agPortCurCfgState INTEGER
  agPortCurCfgVlanTag INTEGER
  agPortCurCfgStp INTEGER
  agPortCurCfgRmon INTEGER
  agPortCurCfgPVID INTEGER
  agPortCurCfgFastEthAutoNeg INTEGER
  agPortCurCfgFastEthSpeed INTEGER
  agPortCurCfgFastEthMode INTEGER
  agPortCurCfgFastEthFctl INTEGER
  agPortCurCfgGigEthAutoNeg INTEGER
  agPortCurCfgGigEthFctl INTEGER
  agPortCurCfgPortName DisplayString
  agPortCurCfgBwmContract INTEGER
  agPortCurCfgDiscardNonIPs INTEGER
  agPortCurCfgLinkTrap INTEGER

AgPortNewCfgTableEntry  
SEQUENCE    
  agPortNewCfgIndx INTEGER
  agPortNewCfgPrefLink INTEGER
  agPortNewCfgBackLink INTEGER
  agPortNewCfgState INTEGER
  agPortNewCfgVlanTag INTEGER
  agPortNewCfgStp INTEGER
  agPortNewCfgRmon INTEGER
  agPortNewCfgPVID INTEGER
  agPortNewCfgFastEthAutoNeg INTEGER
  agPortNewCfgFastEthSpeed INTEGER
  agPortNewCfgFastEthMode INTEGER
  agPortNewCfgFastEthFctl INTEGER
  agPortNewCfgGigEthAutoNeg INTEGER
  agPortNewCfgGigEthFctl INTEGER
  agPortNewCfgPortName DisplayString
  agPortNewCfgBwmContract INTEGER
  agPortNewCfgDiscardNonIPs INTEGER
  agPortNewCfgLinkTrap INTEGER

VlanCurCfgTableEntry  
SEQUENCE    
  vlanCurCfgVlanId INTEGER
  vlanCurCfgVlanName DisplayString
  vlanCurCfgPorts OCTET STRING
  vlanCurCfgState INTEGER
  vlanCurCfgJumbo INTEGER
  vlanCurCfgBwmContract INTEGER
  vlanCurCfgStg INTEGER

VlanNewCfgTableEntry  
SEQUENCE    
  vlanNewCfgVlanId INTEGER
  vlanNewCfgVlanName DisplayString
  vlanNewCfgPorts OCTET STRING
  vlanNewCfgState INTEGER
  vlanNewCfgJumbo INTEGER
  vlanNewCfgAddPort INTEGER
  vlanNewCfgRemovePort INTEGER
  vlanNewCfgDelete INTEGER
  vlanNewCfgBwmContract INTEGER
  vlanNewCfgStg INTEGER

TrunkGroupCurCfgTableEntry  
SEQUENCE    
  trunkGroupCurCfgIndex INTEGER
  trunkGroupCurCfgPorts OCTET STRING
  trunkGroupCurCfgState INTEGER
  trunkGroupCurCfgBwmContract INTEGER

TrunkGroupNewCfgTableEntry  
SEQUENCE    
  trunkGroupNewCfgIndex INTEGER
  trunkGroupNewCfgPorts OCTET STRING
  trunkGroupNewCfgAddPort INTEGER
  trunkGroupNewCfgRemovePort INTEGER
  trunkGroupNewCfgState INTEGER
  trunkGroupNewCfgDelete INTEGER
  trunkGroupNewCfgBwmContract INTEGER

StgCurCfgTableEntry  
SEQUENCE    
  stgCurCfgIndex INTEGER
  stgCurCfgState INTEGER
  stgCurCfgVlanBmap1 OCTET STRING
  stgCurCfgVlanBmap2 OCTET STRING

StgNewCfgTableEntry  
SEQUENCE    
  stgNewCfgIndex INTEGER
  stgNewCfgState INTEGER
  stgNewCfgDefaultCfg INTEGER
  stgNewCfgAddVlan INTEGER
  stgNewCfgRemoveVlan INTEGER
  stgNewCfgVlanBmap1 OCTET STRING
  stgNewCfgVlanBmap2 OCTET STRING

StgCurCfgPortTableEntry  
SEQUENCE    
  stgCurCfgStgIndex INTEGER
  stgCurCfgPortIndex INTEGER
  stgCurCfgPortState INTEGER

StgNewCfgPortTableEntry  
SEQUENCE    
  stgNewCfgStgIndex INTEGER
  stgNewCfgPortIndex INTEGER
  stgNewCfgPortState INTEGER

PmCurCfgPortMonitorEntry  
SEQUENCE    
  pmCurCfgPmirrMoniPortIndex INTEGER
  pmCurCfgPmirrMirrPortIndex INTEGER
  pmCurCfgPmirrDirection INTEGER

PmNewCfgPortMonitorEntry  
SEQUENCE    
  pmNewCfgPmirrMoniPortIndex INTEGER
  pmNewCfgPmirrMirrPortIndex INTEGER
  pmNewCfgPmirrDirection INTEGER
  pmNewCfgPmirrDelete INTEGER

PmCurCfgVlanMonitorEntry  
SEQUENCE    
  pmCurCfgVmirrMoniPortIndex INTEGER
  pmCurCfgVmirrMirrVlanIndex INTEGER
  pmCurCfgVmirrDirection INTEGER

PmNewCfgVlanMonitorEntry  
SEQUENCE    
  pmNewCfgVmirrMoniPortIndex INTEGER
  pmNewCfgVmirrMirrVlanIndex INTEGER
  pmNewCfgVmirrDirection INTEGER
  pmNewCfgVmirrDelete INTEGER

PortCpuStatsUtilTableEntry  
SEQUENCE    
  portCpuStatsUtilIndx INTEGER
  portCpuAStatsUtil1Second INTEGER
  portCpuBStatsUtil1Second INTEGER
  portCpuAStatsUtil4Seconds INTEGER
  portCpuBStatsUtil4Seconds INTEGER
  portCpuAStatsUtil64Seconds INTEGER
  portCpuBStatsUtil64Seconds INTEGER

PortInfoTableEntry  
SEQUENCE    
  portInfoIndx INTEGER
  portInfoSpeed INTEGER
  portInfoMode INTEGER
  portInfoFlowCtrl INTEGER
  portInfoLink INTEGER
  portInfoPhyIfDescr DisplayString
  portInfoPhyIfType INTEGER
  portInfoPhyIfMtu INTEGER
  portInfoPhyIfPhysAddress PhysAddress
  portInfoPhyIfOperStatus INTEGER
  portInfoPhyIfLastChange TimeTicks

PortStatsTableEntry  
SEQUENCE    
  portStatsIndx INTEGER
  portStatsPhyIfInOctets Counter
  portStatsPhyIfInUcastPkts Counter
  portStatsPhyIfInNUcastPkts Counter
  portStatsPhyIfInDiscards Counter
  portStatsPhyIfInErrors Counter
  portStatsPhyIfInUnknownProtos Counter
  portStatsPhyIfOutOctets Counter
  portStatsPhyIfOutUcastPkts Counter
  portStatsPhyIfOutNUcastPkts Counter
  portStatsPhyIfOutDiscards Counter
  portStatsPhyIfOutErrors Counter
  portStatsPhyIfOutQLen Gauge
  portStatsPhyIfInBroadcastPkts Counter
  portStatsPhyIfOutBroadcastPkts Counter

Defined Values

vlans 1.3.6.1.4.1.1872.2.1.4
OBJECT IDENTIFIER    

portmirroring 1.3.6.1.4.1.1872.2.1.6
OBJECT IDENTIFIER    

trunkgroup 1.3.6.1.4.1.1872.2.1.7
OBJECT IDENTIFIER    

spannTreeGrpCfg 1.3.6.1.4.1.1872.2.1.19
OBJECT IDENTIFIER    

agPortConfig 1.3.6.1.4.1.1872.2.1.2.3
OBJECT IDENTIFIER    

mirroring 1.3.6.1.4.1.1872.2.1.18
OBJECT IDENTIFIER    

mirrPortMirr 1.3.6.1.4.1.1872.2.1.18.1
OBJECT IDENTIFIER    

mirrVlanMirr 1.3.6.1.4.1.1872.2.1.18.2
OBJECT IDENTIFIER    

portCpuStats 1.3.6.1.4.1.1872.2.1.8.17
OBJECT IDENTIFIER    

port-stats 1.3.6.1.4.1.1872.2.1.8.26
OBJECT IDENTIFIER    

port-info 1.3.6.1.4.1.1872.2.1.9.1
OBJECT IDENTIFIER    

agPortTableMaxEnt 1.3.6.1.4.1.1872.2.1.2.3.1
The maximum number of rows in the port configuration host table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

agPortCurCfgTable 1.3.6.1.4.1.1872.2.1.2.3.2
The table of port configuration in the current_configuration block.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgPortCurCfgTableEntry

agPortCurCfgTableEntry 1.3.6.1.4.1.1872.2.1.2.3.2.1
A row in the port table in the current_configuration block.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AgPortCurCfgTableEntry  

agPortCurCfgIndx 1.3.6.1.4.1.1872.2.1.2.3.2.1.1
The index of the row in port configurations table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  



agPortCurCfgState 1.3.6.1.4.1.1872.2.1.2.3.2.1.4
This is the state of the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

agPortCurCfgVlanTag 1.3.6.1.4.1.1872.2.1.2.3.2.1.5
This is VLAN tag state of the port
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER tagged(2), untagged(3)  

agPortCurCfgStp 1.3.6.1.4.1.1872.2.1.2.3.2.1.6
This object is used to turn Spanning Tree on or off for the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(2), off(3)  

agPortCurCfgRmon 1.3.6.1.4.1.1872.2.1.2.3.2.1.7
This object is used to turn RMON on or off on the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(2), off(3)  

agPortCurCfgPVID 1.3.6.1.4.1.1872.2.1.2.3.2.1.8
The default VLAN ID for the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4094  

agPortCurCfgFastEthAutoNeg 1.3.6.1.4.1.1872.2.1.2.3.2.1.9
This object is used to turn the autonegotiation on or off for fast Ethernet connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(2), off(3)  

agPortCurCfgFastEthSpeed 1.3.6.1.4.1.1872.2.1.2.3.2.1.10
Selects the port speed for fast Ethernet connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER mbs10(2), mbs100(3), mbs10or100(4)  

agPortCurCfgFastEthMode 1.3.6.1.4.1.1872.2.1.2.3.2.1.11
This object is used to select port mode for fast Ethernet connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER full-duplex(2), half-duplex(3), full-or-half-duplex(4)  

agPortCurCfgFastEthFctl 1.3.6.1.4.1.1872.2.1.2.3.2.1.12
Selects the port flow control for fast Ethernet connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER transmit(2), receive(3), both(4), none(5)  

agPortCurCfgGigEthAutoNeg 1.3.6.1.4.1.1872.2.1.2.3.2.1.13
This object is used to turn the autonegotiation on or off for gigabit Ethernet connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(2), off(3)  

agPortCurCfgGigEthFctl 1.3.6.1.4.1.1872.2.1.2.3.2.1.14
This object is used to select port flow control for gigabit Ethernet connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER transmit(2), receive(3), both(4), none(5)  

agPortCurCfgPortName 1.3.6.1.4.1.1872.2.1.2.3.2.1.15
The switch port name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..63)  

agPortCurCfgBwmContract 1.3.6.1.4.1.1872.2.1.2.3.2.1.16
The switch port Bandwidth Management contract number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

agPortCurCfgDiscardNonIPs 1.3.6.1.4.1.1872.2.1.2.3.2.1.17
Enable or disable to discard all non-IP traffic on the switch port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

agPortCurCfgLinkTrap 1.3.6.1.4.1.1872.2.1.2.3.2.1.18
Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agPortNewCfgTable 1.3.6.1.4.1.1872.2.1.2.3.3
The table of port configuration in the new_configuration block.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgPortNewCfgTableEntry

agPortNewCfgTableEntry 1.3.6.1.4.1.1872.2.1.2.3.3.1
A row in the port configuration table in the new_configuration block.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AgPortNewCfgTableEntry  

agPortNewCfgIndx 1.3.6.1.4.1.1872.2.1.2.3.3.1.1
The index of the row in port configurations table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  



agPortNewCfgState 1.3.6.1.4.1.1872.2.1.2.3.3.1.4
This is the state of the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

agPortNewCfgVlanTag 1.3.6.1.4.1.1872.2.1.2.3.3.1.5
This is VLAN tag state of the port
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tagged(2), untagged(3)  

agPortNewCfgStp 1.3.6.1.4.1.1872.2.1.2.3.3.1.6
This object is used to turn Spanning Tree on or off for the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(2), off(3)  

agPortNewCfgRmon 1.3.6.1.4.1.1872.2.1.2.3.3.1.7
This object is used to turn RMON on or off on the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(2), off(3)  

agPortNewCfgPVID 1.3.6.1.4.1.1872.2.1.2.3.3.1.8
The default VLAN ID for the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..4094  

agPortNewCfgFastEthAutoNeg 1.3.6.1.4.1.1872.2.1.2.3.3.1.9
This object is used to turn the autonegotiation on or off for fast Ethernet connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(2), off(3)  

agPortNewCfgFastEthSpeed 1.3.6.1.4.1.1872.2.1.2.3.3.1.10
Selects the port speed for fast Ethernet connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER mbs10(2), mbs100(3), mbs10or100(4)  

agPortNewCfgFastEthMode 1.3.6.1.4.1.1872.2.1.2.3.3.1.11
This object is used to select port mode for fast Ethernet connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER full-duplex(2), half-duplex(3), full-or-half-duplex(4)  

agPortNewCfgFastEthFctl 1.3.6.1.4.1.1872.2.1.2.3.3.1.12
Selects the port flow control for fast Ethernet connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER transmit(2), receive(3), both(4), none(5)  

agPortNewCfgGigEthAutoNeg 1.3.6.1.4.1.1872.2.1.2.3.3.1.13
This object is used to turn the autonegotiation on or off for gigabit Ethernet connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(2), off(3)  

agPortNewCfgGigEthFctl 1.3.6.1.4.1.1872.2.1.2.3.3.1.14
This object is used to select port flow control for gigabit Ethernet connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER transmit(2), receive(3), both(4), none(5)  

agPortNewCfgPortName 1.3.6.1.4.1.1872.2.1.2.3.3.1.15
The switch port name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..63)  

agPortNewCfgBwmContract 1.3.6.1.4.1.1872.2.1.2.3.3.1.16
The switch port Bandwidth Management contract number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

agPortNewCfgDiscardNonIPs 1.3.6.1.4.1.1872.2.1.2.3.3.1.17
Enable or disable to discard all non-IP traffic on the switch port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

agPortNewCfgLinkTrap 1.3.6.1.4.1.1872.2.1.2.3.3.1.18
Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vlanMaxEnt 1.3.6.1.4.1.1872.2.1.4.1
The maximum number of rows in the VLAN configuration table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vlanCurCfgTable 1.3.6.1.4.1.1872.2.1.4.2
The table of VLAN configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VlanCurCfgTableEntry

vlanCurCfgTableEntry 1.3.6.1.4.1.1872.2.1.4.2.1
A row in the VLAN configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VlanCurCfgTableEntry  

vlanCurCfgVlanId 1.3.6.1.4.1.1872.2.1.4.2.1.1
The VLAN identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4094  

vlanCurCfgVlanName 1.3.6.1.4.1.1872.2.1.4.2.1.2
The VLAN name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

vlanCurCfgPorts 1.3.6.1.4.1.1872.2.1.4.2.1.3
The port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the VLAN 0 - The represented port does not belong to the VLAN
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

vlanCurCfgState 1.3.6.1.4.1.1872.2.1.4.2.1.4
Enable or disable a VLAN
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vlanCurCfgJumbo 1.3.6.1.4.1.1872.2.1.4.2.1.5
Enable or Disable the Jumbo frame support for the VLAN
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vlanCurCfgBwmContract 1.3.6.1.4.1.1872.2.1.4.2.1.6
Default contract number the VLAN
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vlanCurCfgStg 1.3.6.1.4.1.1872.2.1.4.2.1.7
The Spanning Tree Group for the VLAN.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vlanNewCfgTable 1.3.6.1.4.1.1872.2.1.4.3
The table of VLAN configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VlanNewCfgTableEntry

vlanNewCfgTableEntry 1.3.6.1.4.1.1872.2.1.4.3.1
A row in the VLAN configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VlanNewCfgTableEntry  

vlanNewCfgVlanId 1.3.6.1.4.1.1872.2.1.4.3.1.1
The VLAN identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4094  

vlanNewCfgVlanName 1.3.6.1.4.1.1872.2.1.4.3.1.2
The VLAN name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

vlanNewCfgPorts 1.3.6.1.4.1.1872.2.1.4.3.1.3
The port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the VLAN 0 - The represented port does not belong to the VLAN
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

vlanNewCfgState 1.3.6.1.4.1.1872.2.1.4.3.1.4
Enable or disable a VLAN
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vlanNewCfgJumbo 1.3.6.1.4.1.1872.2.1.4.3.1.5
Enable or Disable the Jumbo frame support for the VLAN
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vlanNewCfgAddPort 1.3.6.1.4.1.1872.2.1.4.3.1.6
The port to be added to the specified VLAN. A '0' value is returned when read.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

vlanNewCfgRemovePort 1.3.6.1.4.1.1872.2.1.4.3.1.7
The port to be removed from the specified VLAN. A '0' value is returned when read.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

vlanNewCfgDelete 1.3.6.1.4.1.1872.2.1.4.3.1.8
This is an action object to create or delete a VLAN. other(1) is returned always when read. The following values are writable: delete(2)...to delete a VLAN
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

vlanNewCfgBwmContract 1.3.6.1.4.1.1872.2.1.4.3.1.9
Default contract number for the VLAN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

vlanNewCfgStg 1.3.6.1.4.1.1872.2.1.4.3.1.10
The Spanning Tree Group for the VLAN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pmCurCfgMonitoringPort 1.3.6.1.4.1.1872.2.1.6.1
The port number of the monitoring port.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

pmNewCfgMonitoringPort 1.3.6.1.4.1.1872.2.1.6.2
The port number of the monitoring port.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER  

pmCurCfgMirroredPort 1.3.6.1.4.1.1872.2.1.6.3
The port number of the mirrored port.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

pmNewCfgMirroredPort 1.3.6.1.4.1.1872.2.1.6.4
The port number of the mirrored port.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER  

pmCurCfgMonitoredTraffic 1.3.6.1.4.1.1872.2.1.6.5
The type of traffic to be monitored with respect to the mirrored port.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER none(2), received(3), transmitted(4), both(5)  

pmNewCfgMonitoredTraffic 1.3.6.1.4.1.1872.2.1.6.6
The type of traffic to be monitored with respect to the mirrored port.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER none(2), received(3), transmitted(4), both(5)  

pmCurCfgState 1.3.6.1.4.1.1872.2.1.6.7
The state of Port mirroring.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

pmNewCfgState 1.3.6.1.4.1.1872.2.1.6.8
The state of Port mirroring.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

pmCurCfgTimeout 1.3.6.1.4.1.1872.2.1.6.9
The mirroring timeout value in seconds.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..86400  

pmNewCfgTimeout 1.3.6.1.4.1.1872.2.1.6.10
The mirroring timeout value in seconds.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..86400  

trunkGroupTableMaxSize 1.3.6.1.4.1.1872.2.1.7.1
The maximum number of entries in trunk group table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

trunkGroupCurCfgTable 1.3.6.1.4.1.1872.2.1.7.2
The table of trunk group configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrunkGroupCurCfgTableEntry

trunkGroupCurCfgTableEntry 1.3.6.1.4.1.1872.2.1.7.2.1
A row in the trunk group configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrunkGroupCurCfgTableEntry  

trunkGroupCurCfgIndex 1.3.6.1.4.1.1872.2.1.7.2.1.1
The identifier of the trunk group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

trunkGroupCurCfgPorts 1.3.6.1.4.1.1872.2.1.7.2.1.2
The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the trunk group 0 - The represented port does not belong to the trunk group
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

trunkGroupCurCfgState 1.3.6.1.4.1.1872.2.1.7.2.1.3
Enable or disable a trunk group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

trunkGroupCurCfgBwmContract 1.3.6.1.4.1.1872.2.1.7.2.1.4
Default BW contract of a trunk group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

trunkGroupNewCfgTable 1.3.6.1.4.1.1872.2.1.7.3
The table of trunk group configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrunkGroupNewCfgTableEntry

trunkGroupNewCfgTableEntry 1.3.6.1.4.1.1872.2.1.7.3.1
A row in the trunk group configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrunkGroupNewCfgTableEntry  

trunkGroupNewCfgIndex 1.3.6.1.4.1.1872.2.1.7.3.1.1
The identifier of the trunk group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

trunkGroupNewCfgPorts 1.3.6.1.4.1.1872.2.1.7.3.1.2
The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the trunk group 0 - The represented port does not belong to the trunk group
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

trunkGroupNewCfgAddPort 1.3.6.1.4.1.1872.2.1.7.3.1.3
The port to be added in the trunk group. When read, 0 is returned.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

trunkGroupNewCfgRemovePort 1.3.6.1.4.1.1872.2.1.7.3.1.4
The port to be deleted from the trunk group. when read, 0 is returned.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

trunkGroupNewCfgState 1.3.6.1.4.1.1872.2.1.7.3.1.5
Enable or disable a trunk group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

trunkGroupNewCfgDelete 1.3.6.1.4.1.1872.2.1.7.3.1.6
Setting the value to delete(2) will delete the entire row. When read, other(1) is returned.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

trunkGroupNewCfgBwmContract 1.3.6.1.4.1.1872.2.1.7.3.1.7
Default BW contract of a trunk group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

stgCurCfgTable 1.3.6.1.4.1.1872.2.1.19.1
The table of Spanning Tree Groups configuration in the current_config.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StgCurCfgTableEntry

stgCurCfgTableEntry 1.3.6.1.4.1.1872.2.1.19.1.1
Information about a particular Spanning Tree Group configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  StgCurCfgTableEntry  

stgCurCfgIndex 1.3.6.1.4.1.1872.2.1.19.1.1.1
The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

stgCurCfgState 1.3.6.1.4.1.1872.2.1.19.1.1.2
Turn on of off Spanning Tree operation of a particular Spanning Tree Group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

stgCurCfgVlanBmap1 1.3.6.1.4.1.1872.2.1.19.1.1.3
The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 2048. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 9 || || || ||___ vlan 8 || |____ vlan 7 || . . . ||_________ vlan 2 |__________ vlan 1 (as index to stgCurCfgTable) where x : 1 - The represented vlan applied to the spanning tree. 0 - The represented vlan not applied to the spanning tree
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

stgCurCfgVlanBmap2 1.3.6.1.4.1.1872.2.1.19.1.1.4
The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 2049 to 4096. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 2057 || || || ||___ vlan 2056 || |____ vlan 2055 || . . . ||_________ vlan 2050 |__________ vlan 2049 (as index to stgCurCfgTable) where x : 1 - The represented vlan applied to the spanning tree. 0 - The represented vlan not applied to the spanning tree
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

stgNewCfgTable 1.3.6.1.4.1.1872.2.1.19.2
The table of Spanning Tree Groups configuration in the new_config.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StgNewCfgTableEntry

stgNewCfgTableEntry 1.3.6.1.4.1.1872.2.1.19.2.1
Information about a particular Spanning Tree Group configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  StgNewCfgTableEntry  

stgNewCfgIndex 1.3.6.1.4.1.1872.2.1.19.2.1.1
The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

stgNewCfgState 1.3.6.1.4.1.1872.2.1.19.2.1.2
Turn on of off Spanning Tree operation of a particular Spanning Tree Group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

stgNewCfgDefaultCfg 1.3.6.1.4.1.1872.2.1.19.2.1.3
Setting the value to default-config(1) will set the default configuration as recommended by IEEE 802.1D for a particular Spanning Tree Group. default-config (1) is always returned When read, but it does not mean anything.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER default-config(1)  

stgNewCfgAddVlan 1.3.6.1.4.1.1872.2.1.19.2.1.4
The vlan to be added to the specified Spanning Tree Group. A '0' value is returned when read.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

stgNewCfgRemoveVlan 1.3.6.1.4.1.1872.2.1.19.2.1.5
The vlan to be removed from the specified Spanning Tree Group. A '0' value is returned when read.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

stgNewCfgVlanBmap1 1.3.6.1.4.1.1872.2.1.19.2.1.6
The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 2048. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 9 || || || ||___ vlan 8 || |____ vlan 7 || . . . ||_________ vlan 2 |__________ vlan 1 (as index to stgCurCfgTable) where x : 1 - The represented vlan applied to the spanning tree. 0 - The represented vlan not applied to the spanning tree
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

stgNewCfgVlanBmap2 1.3.6.1.4.1.1872.2.1.19.2.1.7
The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 2049 to 4096. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 2057 || || || ||___ vlan 2056 || |____ vlan 2055 || . . . ||_________ vlan 2050 |__________ vlan 2049 (as index to stgCurCfgTable) where x : 1 - The represented vlan applied to the spanning tree. 0 - The represented vlan not applied to the spanning tree
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

stgCurCfgPortTable 1.3.6.1.4.1.1872.2.1.19.3
The table of Spanning Tree Group port configuration in the current_config.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StgCurCfgPortTableEntry

stgCurCfgPortTableEntry 1.3.6.1.4.1.1872.2.1.19.3.1
Information about port configuration of a particular Spanning Tree Group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  StgCurCfgPortTableEntry  

stgCurCfgStgIndex 1.3.6.1.4.1.1872.2.1.19.3.1.1
The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

stgCurCfgPortIndex 1.3.6.1.4.1.1872.2.1.19.3.1.2
The port identifier of a particular Spanning Tree Group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

stgCurCfgPortState 1.3.6.1.4.1.1872.2.1.19.3.1.3
Turn on of off Spanning Tree operation of a particular port of a Spanning Tree Group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

stgNewCfgPortTable 1.3.6.1.4.1.1872.2.1.19.4
The table of Spanning Tree Group port configuration in the new_config.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StgNewCfgPortTableEntry

stgNewCfgPortTableEntry 1.3.6.1.4.1.1872.2.1.19.4.1
Information about port configuration of a particular Spanning Tree Group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  StgNewCfgPortTableEntry  

stgNewCfgStgIndex 1.3.6.1.4.1.1872.2.1.19.4.1.1
The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

stgNewCfgPortIndex 1.3.6.1.4.1.1872.2.1.19.4.1.2
The port identifier of a particular Spanning Tree Group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

stgNewCfgPortState 1.3.6.1.4.1.1872.2.1.19.4.1.3
Turn on of off Spanning Tree operation of a particular port of a Spanning Tree Group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

pmCurCfgPortMirrState 1.3.6.1.4.1.1872.2.1.18.1.1
The state of port-based port mirroring.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

pmNewCfgPortMirrState 1.3.6.1.4.1.1872.2.1.18.1.2
The state of port-based port mirroring.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

pmCurCfgPortMonitorTable 1.3.6.1.4.1.1872.2.1.18.1.3
The table of monitoring ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PmCurCfgPortMonitorEntry

pmCurCfgPortMonitorEntry 1.3.6.1.4.1.1872.2.1.18.1.3.1
A row in the monitoring port table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PmCurCfgPortMonitorEntry  

pmCurCfgPmirrMoniPortIndex 1.3.6.1.4.1.1872.2.1.18.1.3.1.1
The monitoring port number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pmCurCfgPmirrMirrPortIndex 1.3.6.1.4.1.1872.2.1.18.1.3.1.2
The mirrored port number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pmCurCfgPmirrDirection 1.3.6.1.4.1.1872.2.1.18.1.3.1.3
The type of traffic to be monitored with respect to the mirrored port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER in(1), out(2), both(3)  

pmNewCfgPortMonitorTable 1.3.6.1.4.1.1872.2.1.18.1.4
The table of monitoring ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PmNewCfgPortMonitorEntry

pmNewCfgPortMonitorEntry 1.3.6.1.4.1.1872.2.1.18.1.4.1
A row in the monitoring port table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PmNewCfgPortMonitorEntry  

pmNewCfgPmirrMoniPortIndex 1.3.6.1.4.1.1872.2.1.18.1.4.1.1
The monitoring port number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pmNewCfgPmirrMirrPortIndex 1.3.6.1.4.1.1872.2.1.18.1.4.1.2
The mirrored port number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pmNewCfgPmirrDirection 1.3.6.1.4.1.1872.2.1.18.1.4.1.3
The type of traffic to be monitored with respect to the mirrored port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER in(1), out(2), both(3)  

pmNewCfgPmirrDelete 1.3.6.1.4.1.1872.2.1.18.1.4.1.4
Setting the value to delete(2) will delete the entire row. When read, other(1) is returned.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

pmCurCfgVlanMirrState 1.3.6.1.4.1.1872.2.1.18.2.1
The state of vlan-based port mirroring.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

pmNewCfgVlanMirrState 1.3.6.1.4.1.1872.2.1.18.2.2
The state of vlan-based port mirroring.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

pmCurCfgVlanMonitorTable 1.3.6.1.4.1.1872.2.1.18.2.3
The table of vlan based port mirroring.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PmCurCfgVlanMonitorEntry

pmCurCfgVlanMonitorEntry 1.3.6.1.4.1.1872.2.1.18.2.3.1
A row in the monitoring vlan table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PmCurCfgVlanMonitorEntry  

pmCurCfgVmirrMoniPortIndex 1.3.6.1.4.1.1872.2.1.18.2.3.1.1
The monitoring port number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pmCurCfgVmirrMirrVlanIndex 1.3.6.1.4.1.1872.2.1.18.2.3.1.2
The mirrored vlan number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pmCurCfgVmirrDirection 1.3.6.1.4.1.1872.2.1.18.2.3.1.3
The type of traffic to be monitored with respect to the mirrored vlan.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER in(1), out(2), both(3)  

pmNewCfgVlanMonitorTable 1.3.6.1.4.1.1872.2.1.18.2.4
The table of vlan-based port mirroring.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PmNewCfgVlanMonitorEntry

pmNewCfgVlanMonitorEntry 1.3.6.1.4.1.1872.2.1.18.2.4.1
A row in the monitoring vlan table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PmNewCfgVlanMonitorEntry  

pmNewCfgVmirrMoniPortIndex 1.3.6.1.4.1.1872.2.1.18.2.4.1.1
The monitoring port number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pmNewCfgVmirrMirrVlanIndex 1.3.6.1.4.1.1872.2.1.18.2.4.1.2
The mirrored vlan number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pmNewCfgVmirrDirection 1.3.6.1.4.1.1872.2.1.18.2.4.1.3
The type of traffic to be monitored with respect to the mirrored vlan.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER in(1), out(2), both(3)  

pmNewCfgVmirrDelete 1.3.6.1.4.1.1872.2.1.18.2.4.1.4
Setting the value to delete(2) will delete the entire row. When read, other(1) is returned.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

portCpuStatsUtilTable 1.3.6.1.4.1.1872.2.1.8.17.1
The table of port CPU utilization.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortCpuStatsUtilTableEntry

portCpuStatsUtilTableEntry 1.3.6.1.4.1.1872.2.1.8.17.1.1
A row in the port CPU utilization table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PortCpuStatsUtilTableEntry  

portCpuStatsUtilIndx 1.3.6.1.4.1.1872.2.1.8.17.1.1.1
The port index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

portCpuAStatsUtil1Second 1.3.6.1.4.1.1872.2.1.8.17.1.1.2
The utilization of port CPU A over 1 second. It shows the percentage.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portCpuBStatsUtil1Second 1.3.6.1.4.1.1872.2.1.8.17.1.1.3
The utilization of port CPU B over 1 second. It shows the percentage.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portCpuAStatsUtil4Seconds 1.3.6.1.4.1.1872.2.1.8.17.1.1.4
The utilization of port CPU A over 4 seconds. It shows the percentage.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portCpuBStatsUtil4Seconds 1.3.6.1.4.1.1872.2.1.8.17.1.1.5
The utilization of port CPU B over 4 seconds. It shows the percentage.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portCpuAStatsUtil64Seconds 1.3.6.1.4.1.1872.2.1.8.17.1.1.6
The utilization of port CPU A over 64 seconds. It shows the percentage.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portCpuBStatsUtil64Seconds 1.3.6.1.4.1.1872.2.1.8.17.1.1.7
The utilization of port CPU B over 64 seconds. It shows the percentage.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portInfoTable 1.3.6.1.4.1.1872.2.1.9.1.1
The table of port information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortInfoTableEntry

portInfoTableEntry 1.3.6.1.4.1.1872.2.1.9.1.1.1
A row in the port information table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PortInfoTableEntry  

portInfoIndx 1.3.6.1.4.1.1872.2.1.9.1.1.1.1
The port index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

portInfoSpeed 1.3.6.1.4.1.1872.2.1.9.1.1.1.2
The current operational speed of the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER mbs10(2), mbs100(3), mbs1000(4), any(5)  

portInfoMode 1.3.6.1.4.1.1872.2.1.9.1.1.1.3
The current operational mode of the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER full-duplex(2), half-duplex(3)  

portInfoFlowCtrl 1.3.6.1.4.1.1872.2.1.9.1.1.1.4
The current operational flow control of the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER transmit(2), receive(3), both(4), none(5)  


portInfoPhyIfDescr 1.3.6.1.4.1.1872.2.1.9.1.1.1.6
A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

portInfoPhyIfType 1.3.6.1.4.1.1872.2.1.9.1.1.1.7
The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), regular1822(2), hdh1822(3), ddn-x25(4), rfc877-x25(5), ethernet-csmacd(6), iso88023-csmacd(7), iso88024-tokenBus(8), iso88025-tokenRing(9), iso88026-man(10), starLan(11), proteon-10Mbit(12), proteon-80Mbit(13), hyperchannel(14), fddi(15), lapb(16), sdlc(17), ds1(18), e1(19), basicISDN(20), primaryISDN(21), propPointToPointSerial(22), ppp(23), softwareLoopback(24), eon(25), ethernet-3Mbit(26), nsip(27), slip(28), ultra(29), ds3(30), sip(31), frame-relay(32)  

portInfoPhyIfMtu 1.3.6.1.4.1.1872.2.1.9.1.1.1.8
The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portInfoPhyIfPhysAddress 1.3.6.1.4.1.1872.2.1.9.1.1.1.9
The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress  

portInfoPhyIfOperStatus 1.3.6.1.4.1.1872.2.1.9.1.1.1.10
The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

portInfoPhyIfLastChange 1.3.6.1.4.1.1872.2.1.9.1.1.1.11
The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

portStatsTable 1.3.6.1.4.1.1872.2.1.8.26.1
The table of port statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortStatsTableEntry

portStatsTableEntry 1.3.6.1.4.1.1872.2.1.8.26.1.1
A row in the port stats table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PortStatsTableEntry  

portStatsIndx 1.3.6.1.4.1.1872.2.1.8.26.1.1.1
The port index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

portStatsPhyIfInOctets 1.3.6.1.4.1.1872.2.1.8.26.1.1.2
The total number of octets received on the interface, including framing characters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

portStatsPhyIfInUcastPkts 1.3.6.1.4.1.1872.2.1.8.26.1.1.3
The number of subnetwork-unicast packets delivered to a higher-layer protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

portStatsPhyIfInNUcastPkts 1.3.6.1.4.1.1872.2.1.8.26.1.1.4
The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

portStatsPhyIfInDiscards 1.3.6.1.4.1.1872.2.1.8.26.1.1.5
The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

portStatsPhyIfInErrors 1.3.6.1.4.1.1872.2.1.8.26.1.1.6
The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

portStatsPhyIfInUnknownProtos 1.3.6.1.4.1.1872.2.1.8.26.1.1.7
The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

portStatsPhyIfOutOctets 1.3.6.1.4.1.1872.2.1.8.26.1.1.8
The total number of octets transmitted out of the interface, including framing characters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

portStatsPhyIfOutUcastPkts 1.3.6.1.4.1.1872.2.1.8.26.1.1.9
The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

portStatsPhyIfOutNUcastPkts 1.3.6.1.4.1.1872.2.1.8.26.1.1.10
The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

portStatsPhyIfOutDiscards 1.3.6.1.4.1.1872.2.1.8.26.1.1.11
The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

portStatsPhyIfOutErrors 1.3.6.1.4.1.1872.2.1.8.26.1.1.12
The number of outbound packets that could not be transmitted because of errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

portStatsPhyIfOutQLen 1.3.6.1.4.1.1872.2.1.8.26.1.1.13
The length of the output packet queue (in packets).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

portStatsPhyIfInBroadcastPkts 1.3.6.1.4.1.1872.2.1.8.26.1.1.14
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

portStatsPhyIfOutBroadcastPkts 1.3.6.1.4.1.1872.2.1.8.26.1.1.15
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mirrOper 1.3.6.1.4.1.1872.2.1.14.3
OBJECT IDENTIFIER    

mirrOperMonitoringPort 1.3.6.1.4.1.1872.2.1.14.3.1
The switch port where the mirrored traffic are sent to. A zero value indicates this field has not been configured.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mirrOperMirroredPort 1.3.6.1.4.1.1872.2.1.14.3.2
The switch port where the egress traffic to be mirrored. A zero value indicates this field has not been configured.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mirrOperType 1.3.6.1.4.1.1872.2.1.14.3.3
Type of packets to be sent to the monitor port. in = packets received at the mirrored port out = packets sent from the mirrored port both = packets sent and received by the mirrored port
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), in(2), out(3), both(4)  

mirrOperTimeout 1.3.6.1.4.1.1872.2.1.14.3.4
The duration in seconds for activating the mirroring rule. Zero means forever.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..86400  

mirrOperState 1.3.6.1.4.1.1872.2.1.14.3.5
Enable or disable port mirroring.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor