ALTEON-CHEETAH-LAYER4-MIB

File: ALTEON-CHEETAH-LAYER4-MIB.mib (782993 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC ALTEON-ROOT-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
Counter32 Gauge32 Counter64
IpAddress Unsigned32 DisplayString
PhysAddress aws-switch

Defined Types

SlbCurCfgRealServerEntry  
SEQUENCE    
  slbCurCfgRealServerIndex Integer32
  slbCurCfgRealServerIpAddr IpAddress
  slbCurCfgRealServerWeight INTEGER
  slbCurCfgRealServerMaxConns INTEGER
  slbCurCfgRealServerTimeOut INTEGER
  slbCurCfgRealServerBackUp Integer32
  slbCurCfgRealServerPingInterval INTEGER
  slbCurCfgRealServerFailRetry INTEGER
  slbCurCfgRealServerSuccRetry INTEGER
  slbCurCfgRealServerState INTEGER
  slbCurCfgRealServerType INTEGER
  slbCurCfgRealServerName DisplayString
  slbCurCfgRealServerUrlBmap OCTET STRING
  slbCurCfgRealServerCookie INTEGER
  slbCurCfgRealServerExcludeStr INTEGER
  slbCurCfgRealServerSubmac INTEGER
  slbCurCfgRealServerProxy INTEGER
  slbCurCfgRealServerLdapwr INTEGER
  slbCurCfgRealServerOid DisplayString
  slbCurCfgRealServerCommString DisplayString
  slbCurCfgRealServerIdsvlan INTEGER
  slbCurCfgRealServerIdsport Integer32
  slbCurCfgRealServerAvail INTEGER
  slbCurCfgRealServerFastHealthCheck INTEGER
  slbCurCfgRealServerSubdmac INTEGER
  slbCurCfgRealServerBkpPreempt INTEGER
  slbCurCfgRealServerOverflow INTEGER
  slbCurCfgRealServerIpVer INTEGER
  slbCurCfgRealServerIpv6Addr DisplayString

SlbNewCfgRealServerEntry  
SEQUENCE    
  slbNewCfgRealServerIndex Integer32
  slbNewCfgRealServerIpAddr IpAddress
  slbNewCfgRealServerWeight INTEGER
  slbNewCfgRealServerMaxConns INTEGER
  slbNewCfgRealServerTimeOut INTEGER
  slbNewCfgRealServerBackUp Integer32
  slbNewCfgRealServerPingInterval INTEGER
  slbNewCfgRealServerFailRetry INTEGER
  slbNewCfgRealServerSuccRetry INTEGER
  slbNewCfgRealServerState INTEGER
  slbNewCfgRealServerDelete INTEGER
  slbNewCfgRealServerType INTEGER
  slbNewCfgRealServerName DisplayString
  slbNewCfgRealServerUrlBmap OCTET STRING
  slbNewCfgRealServerAddUrl Integer32
  slbNewCfgRealServerRemUrl Integer32
  slbNewCfgRealServerCookie INTEGER
  slbNewCfgRealServerExcludeStr INTEGER
  slbNewCfgRealServerSubmac INTEGER
  slbNewCfgRealServerProxy INTEGER
  slbNewCfgRealServerLdapwr INTEGER
  slbNewCfgRealServerOid DisplayString
  slbNewCfgRealServerCommString DisplayString
  slbNewCfgRealServerIdsvlan INTEGER
  slbNewCfgRealServerIdsport Integer32
  slbNewCfgRealServerAvail INTEGER
  slbNewCfgRealServerFastHealthCheck INTEGER
  slbNewCfgRealServerSubdmac INTEGER
  slbNewCfgRealServerBkpPreempt INTEGER
  slbNewCfgRealServerOverflow INTEGER
  slbNewCfgRealServerIpVer INTEGER
  slbNewCfgRealServerIpv6Addr DisplayString
  slbNewCfgRealServerNxtRportIdx INTEGER
  slbNewCfgRealServerNxtBuddyIdx INTEGER

SlbCurCfgRealServPortEntry  
SEQUENCE    
  slbCurCfgRealServIndex Integer32
  slbCurCfgRealServPortIndex Integer32
  slbCurCfgRealServRealPort INTEGER

SlbNewCfgRealServPortEntry  
SEQUENCE    
  slbNewCfgRealServIndex Integer32
  slbNewCfgRealServPortIndex Integer32
  slbNewCfgRealServRealPort INTEGER
  slbNewCfgRealServPortDelete INTEGER
  slbNewCfgRealServRealPortFreeIdx INTEGER

SlbCurCfgBuddyEntry  
SEQUENCE    
  slbCurCfgRealSerIndex Integer32
  slbCurCfgBuddyIndex Integer32
  slbCurCfgBuddyRealIndex Integer32
  slbCurCfgBuddyGroupIndex Integer32
  slbCurCfgBuddyService INTEGER

SlbNewCfgBuddyEntry  
SEQUENCE    
  slbNewCfgRealSerIndex Integer32
  slbNewCfgBuddyIndex Integer32
  slbNewCfgBuddyRealIndex Integer32
  slbNewCfgBuddyGroupIndex Integer32
  slbNewCfgBuddyService INTEGER
  slbNewCfgBuddyDelete INTEGER

SlbCurCfgGroupEntry  
SEQUENCE    
  slbCurCfgGroupIndex Integer32
  slbCurCfgGroupRealServers OCTET STRING
  slbCurCfgGroupMetric INTEGER
  slbCurCfgGroupBackupServer Integer32
  slbCurCfgGroupBackupGroup Integer32
  slbCurCfgGroupHealthCheckUrl DisplayString
  slbCurCfgGroupHealthCheckLayer INTEGER
  slbCurCfgGroupRealThreshold INTEGER
  slbCurCfgGroupVipHealthCheck INTEGER
  slbCurCfgGroupIdsState INTEGER
  slbCurCfgGroupIdsPort INTEGER
  slbCurCfgGroupIdsFlood INTEGER
  slbCurCfgGroupMinmissHash INTEGER
  slbCurCfgGroupPhashMask IpAddress
  slbCurCfgGroupRmetric INTEGER
  slbCurCfgGroupHealthCheckFormula DisplayString
  slbCurCfgGroupWlm Integer32
  slbCurCfgGroupRadiusAuthenString DisplayString
  slbCurCfgGroupOperatorAccess INTEGER
  slbCurCfgGroupSecBackupGroup Integer32
  slbCurCfgGroupSlowstart Integer32
  slbCurCfgGroupMinThreshold Integer32
  slbCurCfgGroupMaxThreshold Integer32
  slbCurCfgGroupName DisplayString
  slbCurCfgGroupIpVer INTEGER
  slbCurCfgGroupBackup DisplayString

SlbNewCfgGroupEntry  
SEQUENCE    
  slbNewCfgGroupIndex Integer32
  slbNewCfgGroupRealServers OCTET STRING
  slbNewCfgGroupAddServer Integer32
  slbNewCfgGroupRemoveServer Integer32
  slbNewCfgGroupMetric INTEGER
  slbNewCfgGroupBackupServer Integer32
  slbNewCfgGroupBackupGroup Integer32
  slbNewCfgGroupHealthCheckUrl DisplayString
  slbNewCfgGroupHealthCheckLayer INTEGER
  slbNewCfgGroupRealThreshold INTEGER
  slbNewCfgGroupVipHealthCheck INTEGER
  slbNewCfgGroupIdsState INTEGER
  slbNewCfgGroupIdsPort INTEGER
  slbNewCfgGroupDelete INTEGER
  slbNewCfgGroupIdsFlood INTEGER
  slbNewCfgGroupMinmissHash INTEGER
  slbNewCfgGroupPhashMask IpAddress
  slbNewCfgGroupRmetric INTEGER
  slbNewCfgGroupHealthCheckFormula DisplayString
  slbNewCfgGroupWlm Integer32
  slbNewCfgGroupRadiusAuthenString DisplayString
  slbNewCfgGroupOperatorAccess INTEGER
  slbNewCfgGroupSecBackupGroup Integer32
  slbNewCfgGroupSlowstart Integer32
  slbNewCfgGroupName DisplayString
  slbNewCfgGroupIpVer INTEGER
  slbNewCfgGroupBackup DisplayString
  slbNewCfgGroupMinThreshold Integer32
  slbNewCfgGroupMaxThreshold Integer32
  slbNewCfgGroupBackupType INTEGER

SlbCurCfgGroupRealServerEntry  
SEQUENCE    
  slbCurCfgRealServGroupIndex Integer32
  slbCurCfgGroupRealServIndex Integer32
  slbCurCfgGroupRealServerState INTEGER

SlbNewCfgGroupRealServerEntry  
SEQUENCE    
  slbNewCfgRealServGroupIndex Integer32
  slbNewCfgGroupRealServIndex Integer32
  slbNewCfgGroupRealServerState INTEGER

SlbCurCfgVirtualServerEntry  
SEQUENCE    
  slbCurCfgVirtServerIndex Integer32
  slbCurCfgVirtServerIpAddress IpAddress
  slbCurCfgVirtServerLayer3Only INTEGER
  slbCurCfgVirtServerState INTEGER
  slbCurCfgVirtServerDname DisplayString
  slbCurCfgVirtServerBwmContract Integer32
  slbCurCfgVirtServerWeight INTEGER
  slbCurCfgVirtServerAvail INTEGER
  slbCurCfgVirtServerRule OCTET STRING
  slbCurCfgVirtServerIpVer INTEGER
  slbCurCfgVirtServerIpv6Addr DisplayString
  slbCurCfgVirtServerVname DisplayString
  slbCurCfgVirtServerCReset INTEGER

SlbNewCfgVirtualServerEntry  
SEQUENCE    
  slbNewCfgVirtServerIndex Integer32
  slbNewCfgVirtServerIpAddress IpAddress
  slbNewCfgVirtServerLayer3Only INTEGER
  slbNewCfgVirtServerState INTEGER
  slbNewCfgVirtServerDname DisplayString
  slbNewCfgVirtServerBwmContract Integer32
  slbNewCfgVirtServerDelete INTEGER
  slbNewCfgVirtServerWeight INTEGER
  slbNewCfgVirtServerAvail INTEGER
  slbNewCfgVirtServerRule OCTET STRING
  slbNewCfgVirtServerAddRule Integer32
  slbNewCfgVirtServerRemoveRule Integer32
  slbNewCfgVirtServerIpVer INTEGER
  slbNewCfgVirtServerIpv6Addr DisplayString
  slbNewCfgVirtServerVname DisplayString
  slbNewCfgVirtServerFreeServiceIdx INTEGER
  slbNewCfgVirtServerCReset INTEGER

SlbCurCfgVirtServicesEntry  
SEQUENCE    
  slbCurCfgVirtServIndex Integer32
  slbCurCfgVirtServiceIndex Integer32
  slbCurCfgVirtServiceVirtPort INTEGER
  slbCurCfgVirtServiceRealGroup Integer32
  slbCurCfgVirtServiceRealPort INTEGER
  slbCurCfgVirtServiceUDPBalance INTEGER
  slbCurCfgVirtServiceHname DisplayString
  slbCurCfgVirtServiceBwmContract Integer32
  slbCurCfgVirtServiceDirServerRtn INTEGER
  slbCurCfgVirtServiceRtspUrlParse INTEGER
  slbCurCfgVirtServiceFtpParsing INTEGER
  slbCurCfgVirtServiceRemapUDPFrags INTEGER
  slbCurCfgVirtServiceDnsSlb INTEGER
  slbCurCfgVirtServiceResponseCount INTEGER
  slbCurCfgVirtServicePBind INTEGER
  slbCurCfgVirtServiceCname DisplayString
  slbCurCfgVirtServiceCoffset INTEGER
  slbCurCfgVirtServiceClength INTEGER
  slbCurCfgVirtServiceUriCookie INTEGER
  slbCurCfgVirtServiceCExpire DisplayString
  slbCurCfgVirtServiceCookieMode INTEGER
  slbCurCfgVirtServiceDBind INTEGER
  slbCurCfgVirtServiceHttpSlb INTEGER
  slbCurCfgVirtServiceHttpSlbOption INTEGER
  slbCurCfgVirtServiceHttpSlb2 INTEGER
  slbCurCfgVirtServiceHttpHdrName DisplayString
  slbCurCfgVirtServiceUrlHashLen INTEGER
  slbCurCfgVirtServiceCookieDname INTEGER
  slbCurCfgVirtServiceDirect INTEGER
  slbCurCfgVirtServiceThash INTEGER
  slbCurCfgVirtServiceLdapreset INTEGER
  slbCurCfgVirtServiceLdapslb INTEGER
  slbCurCfgVirtServiceSip INTEGER
  slbCurCfgVirtServiceXForwardedFor INTEGER
  slbCurCfgVirtServiceHttpRedir INTEGER
  slbCurCfgVirtServicePbindRport INTEGER
  slbCurCfgVirtServiceEgressPip INTEGER
  slbCurCfgVirtServiceWts INTEGER
  slbCurCfgVirtServiceTimeOut INTEGER
  slbCurCfgVirtServiceSoftGrid INTEGER
  slbCurCfgVirtServiceSessionMirror INTEGER
  slbCurCfgVirtServiceSdpNat INTEGER
  slbCurCfgVirtServiceConnPooling INTEGER
  slbCurCfgVirtPersistentTimeOut INTEGER
  slbCurCfgVirtServiceUhash INTEGER

SlbCurCfgVirtServicesSecondPartEntry  
SEQUENCE    
  slbCurCfgVirtServSecondPartIndex Integer32
  slbCurCfgVirtServiceSecondPartIndex Integer32
  slbCurCfgVirtServiceConnmgtStatus INTEGER
  slbCurCfgVirtServiceConnmgtTimeout INTEGER
  slbCurCfgVirtServiceCachepol DisplayString
  slbCurCfgVirtServiceComppol DisplayString
  slbCurCfgVirtServiceSSLpol DisplayString
  slbCurCfgVirtServiceServCert DisplayString
  slbCurCfgVirtServiceHttpmodList DisplayString
  slbCurCfgVirtServiceCloaksrv INTEGER
  slbCurCfgVirtServErrcodeStatus INTEGER
  slbCurCfgVirtServErrcodeMatch DisplayString
  slbCurCfgVirtServErrcodeHttpRedir INTEGER
  slbCurCfgVirtServErrcodeUrl DisplayString
  slbCurCfgVirtServErrcode DisplayString
  slbCurCfgVirtServErrcodeNew DisplayString
  slbCurCfgVirtServErrcodeReason DisplayString
  slbCurCfgVirtServUrlchangStatus INTEGER
  slbCurCfgVirtServUrlchangHostType INTEGER

SlbCurCfgVirtServicesThirdPartEntry  
SEQUENCE    
  slbCurCfgVirtServThirdPartIndex Integer32
  slbCurCfgVirtServiceThirdPartIndex Integer32
  slbCurCfgVirtServUrlchangHostName DisplayString
  slbCurCfgVirtServUrlchangPathType INTEGER
  slbCurCfgVirtServUrlchangPathMatch DisplayString
  slbCurCfgVirtServUrlchangPageName DisplayString
  slbCurCfgVirtServUrlchangPageType DisplayString
  slbCurCfgVirtServUrlchangActnType INTEGER
  slbCurCfgVirtServUrlchangPathInsrt DisplayString
  slbCurCfgVirtServUrlchangInsrtPostn INTEGER

SlbCurCfgVirtServicesFourthPartEntry  
SEQUENCE    
  slbCurCfgVirtServFourthPartIndex Integer32
  slbCurCfgVirtServiceFourthPartIndex Integer32
  slbCurCfgVirtServUrlchangNewPgName DisplayString
  slbCurCfgVirtServUrlchangNewPgType DisplayString
  slbCurCfgVirtServPathHideStatus INTEGER
  slbCurCfgVirtServPathHideHostType INTEGER
  slbCurCfgVirtServPathHideHostName DisplayString
  slbCurCfgVirtServPathHidePathType INTEGER
  slbCurCfgVirtServPathHidePathName DisplayString
  slbCurCfgVirtServTextrepStatus INTEGER
  slbCurCfgVirtServTextrepAction INTEGER

SlbCurCfgVirtServicesFifthPartEntry  
SEQUENCE    
  slbCurCfgVirtServFifthPartIndex Integer32
  slbCurCfgVirtServiceFifthPartIndex Integer32
  slbCurCfgVirtServTextrepMatchText DisplayString
  slbCurCfgVirtServTextrepReplacTxt DisplayString
  slbCurCfgVirtServApplicationType INTEGER
  slbCurCfgVirtServiceName DisplayString
  slbCurCfgVirtServiceAction INTEGER
  slbCurCfgVirtServiceRedirect DisplayString
  slbCurCfgVirtServiceServCertGrpMark INTEGER
  slbCurCfgVirtServiceDnsType INTEGER
  slbCurCfgVirtServiceClntproxType INTEGER
  slbCurCfgVirtServiceZerowinSize INTEGER
  slbCurCfgVirtServiceCookiePath DisplayString
  slbCurCfgVirtServiceCookieSecure INTEGER
  slbCurCfgVirtServiceNoRtsp INTEGER
  slbCurCfgVirtServiceCkRebind INTEGER
  slbCurCfgVirtServiceParseLimit INTEGER
  slbCurCfgVirtServiceParseLength INTEGER
  slbCurCfgVirtServiceUriNorm INTEGER

SlbNewCfgVirtServicesEntry  
SEQUENCE    
  slbNewCfgVirtServIndex Integer32
  slbNewCfgVirtServiceIndex Integer32
  slbNewCfgVirtServiceVirtPort INTEGER
  slbNewCfgVirtServiceRealGroup Integer32
  slbNewCfgVirtServiceRealPort INTEGER
  slbNewCfgVirtServiceUDPBalance INTEGER
  slbNewCfgVirtServiceHname DisplayString
  slbNewCfgVirtServiceBwmContract Integer32
  slbNewCfgVirtServiceDirServerRtn INTEGER
  slbNewCfgVirtServiceRtspUrlParse INTEGER
  slbNewCfgVirtServiceFtpParsing INTEGER
  slbNewCfgVirtServiceRemapUDPFrags INTEGER
  slbNewCfgVirtServiceDnsSlb INTEGER
  slbNewCfgVirtServiceResponseCount INTEGER
  slbNewCfgVirtServicePBind INTEGER
  slbNewCfgVirtServiceCname DisplayString
  slbNewCfgVirtServiceCoffset INTEGER
  slbNewCfgVirtServiceClength INTEGER
  slbNewCfgVirtServiceUriCookie INTEGER
  slbNewCfgVirtServiceCExpire DisplayString
  slbNewCfgVirtServiceCookieMode INTEGER
  slbNewCfgVirtServiceDBind INTEGER
  slbNewCfgVirtServiceHttpSlb INTEGER
  slbNewCfgVirtServiceHttpSlbOption INTEGER
  slbNewCfgVirtServiceHttpSlb2 INTEGER
  slbNewCfgVirtServiceHttpHdrName DisplayString
  slbNewCfgVirtServiceUrlHashLen INTEGER
  slbNewCfgVirtServiceCookieDname INTEGER
  slbNewCfgVirtServiceDelete INTEGER
  slbNewCfgVirtServiceDirect INTEGER
  slbNewCfgVirtServiceThash INTEGER
  slbNewCfgVirtServiceLdapreset INTEGER
  slbNewCfgVirtServiceLdapslb INTEGER
  slbNewCfgVirtServiceSip INTEGER
  slbNewCfgVirtServiceXForwardedFor INTEGER
  slbNewCfgVirtServiceHttpRedir INTEGER
  slbNewCfgVirtServicePbindRport INTEGER
  slbNewCfgVirtServiceEgressPip INTEGER
  slbNewCfgVirtServiceWts INTEGER
  slbNewCfgVirtServiceTimeOut INTEGER
  slbNewCfgVirtServiceSoftGrid INTEGER
  slbNewCfgVirtServiceSessionMirror INTEGER
  slbNewCfgVirtServiceSdpNat INTEGER
  slbNewCfgVirtServiceConnPooling INTEGER
  slbNewCfgVirtPersistentTimeOut INTEGER
  slbNewCfgVirtServiceUhash INTEGER

SlbNewCfgVirtServicesSecondPartEntry  
SEQUENCE    
  slbNewCfgVirtServSecondPartIndex Integer32
  slbNewCfgVirtServiceSecondPartIndex Integer32
  slbNewCfgVirtServiceConnmgtStatus INTEGER
  slbNewCfgVirtServiceConnmgtTimeout INTEGER
  slbNewCfgVirtServiceCachepol DisplayString
  slbNewCfgVirtServiceComppol DisplayString
  slbNewCfgVirtServiceSSLpol DisplayString
  slbNewCfgVirtServiceServCert DisplayString
  slbNewCfgVirtServiceHttpmodList DisplayString
  slbNewCfgVirtServiceCloaksrv INTEGER
  slbNewCfgVirtServErrcodeStatus INTEGER
  slbNewCfgVirtServErrcodeMatch DisplayString
  slbNewCfgVirtServErrcodeHttpRedir INTEGER
  slbNewCfgVirtServErrcodeUrl DisplayString
  slbNewCfgVirtServErrcode DisplayString
  slbNewCfgVirtServErrcodeNew DisplayString
  slbNewCfgVirtServErrcodeReason DisplayString
  slbNewCfgVirtServUrlchangStatus INTEGER
  slbNewCfgVirtServUrlchangHostType INTEGER

SlbNewCfgVirtServicesThirdPartEntry  
SEQUENCE    
  slbNewCfgVirtServThirdPartIndex Integer32
  slbNewCfgVirtServiceThirdPartIndex Integer32
  slbNewCfgVirtServUrlchangHostName DisplayString
  slbNewCfgVirtServUrlchangPathType INTEGER
  slbNewCfgVirtServUrlchangPathMatch DisplayString
  slbNewCfgVirtServUrlchangPageName DisplayString
  slbNewCfgVirtServUrlchangPageType DisplayString
  slbNewCfgVirtServUrlchangActnType INTEGER
  slbNewCfgVirtServUrlchangPathInsrt DisplayString
  slbNewCfgVirtServUrlchangInsrtPostn INTEGER

SlbNewCfgVirtServicesFourthPartEntry  
SEQUENCE    
  slbNewCfgVirtServFourthPartIndex Integer32
  slbNewCfgVirtServiceFourthPartIndex Integer32
  slbNewCfgVirtServUrlchangNewPgName DisplayString
  slbNewCfgVirtServUrlchangNewPgType DisplayString
  slbNewCfgVirtServPathHideStatus INTEGER
  slbNewCfgVirtServPathHideHostType INTEGER
  slbNewCfgVirtServPathHideHostName DisplayString
  slbNewCfgVirtServPathHidePathType INTEGER
  slbNewCfgVirtServPathHidePathName DisplayString
  slbNewCfgVirtServTextrepStatus INTEGER
  slbNewCfgVirtServTextrepAction INTEGER

SlbNewCfgVirtServicesFifthPartEntry  
SEQUENCE    
  slbNewCfgVirtServFifthPartIndex Integer32
  slbNewCfgVirtServiceFifthPartIndex Integer32
  slbNewCfgVirtServTextrepMatchText DisplayString
  slbNewCfgVirtServTextrepReplacTxt DisplayString
  slbNewCfgVirtServApplicationType INTEGER
  slbNewCfgVirtServiceName DisplayString
  slbNewCfgVirtServiceAction INTEGER
  slbNewCfgVirtServiceRedirect DisplayString
  slbNewCfgVirtServiceServCertGrpMark INTEGER
  slbNewCfgVirtServiceDnsType INTEGER
  slbNewCfgVirtServiceClntproxType INTEGER
  slbNewCfgVirtServiceZerowinSize INTEGER
  slbNewCfgVirtServiceCookiePath DisplayString
  slbNewCfgVirtServiceCookieSecure INTEGER
  slbNewCfgVirtServiceNoRtsp INTEGER
  slbNewCfgVirtServiceCkRebind INTEGER
  slbNewCfgVirtServiceParseLimit INTEGER
  slbNewCfgVirtServiceParseLength INTEGER
  slbNewCfgVirtServiceUriNorm INTEGER

SlbCurCfgUrlBwmEntry  
SEQUENCE    
  slbCurCfgUrlBwmVirtServIndex Integer32
  slbCurCfgUrlBwmVirtServiceIndex Integer32
  slbCurCfgUrlBwmUrlId Integer32
  slbCurCfgUrlBwmContract Integer32

SlbNewCfgUrlBwmEntry  
SEQUENCE    
  slbNewCfgUrlBwmVirtServIndex Integer32
  slbNewCfgUrlBwmVirtServiceIndex Integer32
  slbNewCfgUrlBwmUrlId Integer32
  slbNewCfgUrlBwmContract Integer32
  slbNewCfgUrlBwmDelete INTEGER

SlbCurCfgContRuleEntry  
SEQUENCE    
  slbCurCfgContVirtServIndex Integer32
  slbCurCfgContVirtServiceIndex Integer32
  slbCurCfgContRuleIndex Integer32
  slbCurCfgContRuleName DisplayString
  slbCurCfgContRuleContClass DisplayString
  slbCurCfgContRuleAction INTEGER
  slbCurCfgContRuleRealGrpNum INTEGER
  slbCurCfgContRuleGotoRuleNum INTEGER
  slbCurCfgContRuleRedirection DisplayString
  slbCurCfgContRuleState INTEGER

SlbNewCfgContRuleEntry  
SEQUENCE    
  slbNewCfgContVirtServIndex Integer32
  slbNewCfgContVirtServiceIndex Integer32
  slbNewCfgContRuleIndex Integer32
  slbNewCfgContRuleName DisplayString
  slbNewCfgContRuleContClass DisplayString
  slbNewCfgContRuleAction INTEGER
  slbNewCfgContRuleRealGrpNum INTEGER
  slbNewCfgContRuleGotoRuleNum INTEGER
  slbNewCfgContRuleRedirection DisplayString
  slbNewCfgContRuleCopy INTEGER
  slbNewCfgContRuleState INTEGER
  slbNewCfgContRuleDelete INTEGER

SlbCurCfgPortEntry  
SEQUENCE    
  slbCurCfgPortIndex Integer32
  slbCurCfgPortSlbHotStandby INTEGER
  slbCurCfgPortSlbInterSwitch INTEGER
  slbCurCfgPortSlbPipState INTEGER
  slbCurCfgPortSlbRtsState INTEGER
  slbCurCfgPortSlbIdslbState INTEGER
  slbCurCfgPortSlbState INTEGER
  slbCurCfgPortSlbFilter INTEGER
  slbCurCfgPortSlbServState INTEGER
  slbCurCfgPortSlbClntState INTEGER
  slbCurCfgPortSlbL3Filter INTEGER
  slbCurCfgPortSlbFilterBmap OCTET STRING
  slbCurCfgPortInterSwitchVlan INTEGER
  slbCurCfgPortVlanBmap OCTET STRING

SlbNewCfgPortEntry  
SEQUENCE    
  slbNewCfgPortIndex Integer32
  slbNewCfgPortSlbHotStandby INTEGER
  slbNewCfgPortSlbInterSwitch INTEGER
  slbNewCfgPortSlbPipState INTEGER
  slbNewCfgPortSlbRtsState INTEGER
  slbNewCfgPortDelete INTEGER
  slbNewCfgPortSlbIdslbState INTEGER
  slbNewCfgPortSlbState INTEGER
  slbNewCfgPortSlbFilter INTEGER
  slbNewCfgPortSlbAddFilter INTEGER
  slbNewCfgPortSlbRemFilter INTEGER
  slbNewCfgPortSlbServState INTEGER
  slbNewCfgPortSlbClntState INTEGER
  slbNewCfgPortSlbL3Filter INTEGER
  slbNewCfgPortSlbFilterBmap OCTET STRING
  slbNewCfgPortInterSwitchVlan INTEGER
  slbNewCfgPortVlanBmap OCTET STRING

SlbCurCfgPeerEntry  
SEQUENCE    
  slbCurCfgPeerIndex Integer32
  slbCurCfgPeerIpAddr IpAddress
  slbCurCfgPeerState INTEGER
  slbCurCfgPeerIpv6Addr DisplayString
  slbCurCfgPeerIpVersion INTEGER

SlbNewCfgPeerEntry  
SEQUENCE    
  slbNewCfgPeerIndex Integer32
  slbNewCfgPeerIpAddr IpAddress
  slbNewCfgPeerState INTEGER
  slbNewCfgPeerDelete INTEGER
  slbNewCfgPeerIpv6Addr DisplayString
  slbNewCfgPeerIpVersion INTEGER

SlbCurCfgPeerPIPEntry  
SEQUENCE    
  slbCurCfgPeerPIPIndex Integer32
  slbCurCfgPeerPIPAddr IpAddress
  slbCurCfgPeerPIPv6Addr DisplayString

SlbNewCfgPeerPIPEntry  
SEQUENCE    
  slbNewCfgPeerPIPIndex Integer32
  slbNewCfgPeerPIPAddr IpAddress
  slbNewCfgPeerPIPv6Addr DisplayString
  slbNewCfgPeerPIPDelete INTEGER

FltCurCfgTableEntry  
SEQUENCE    
  fltCurCfgIndx Integer32
  fltCurCfgSrcIpMac INTEGER
  fltCurCfgSrcIp IpAddress
  fltCurCfgSrcIpMask IpAddress
  fltCurCfgDstIpMac INTEGER
  fltCurCfgDstIp IpAddress
  fltCurCfgDstIpMask IpAddress
  fltCurCfgProtocol INTEGER
  fltCurCfgRangeLowSrcPort INTEGER
  fltCurCfgRangeHighSrcPort INTEGER
  fltCurCfgRangeLowDstPort INTEGER
  fltCurCfgRangeHighDstPort INTEGER
  fltCurCfgAction INTEGER
  fltCurCfgRedirPort INTEGER
  fltCurCfgRedirGroup Integer32
  fltCurCfgLog INTEGER
  fltCurCfgState INTEGER
  fltCurCfgNat INTEGER
  fltCurCfgCache INTEGER
  fltCurCfgInvert INTEGER
  fltCurCfgClientProxy INTEGER
  fltCurCfgTcpAck INTEGER
  fltCurCfgSrcMac PhysAddress
  fltCurCfgDstMac PhysAddress
  fltCurCfgFtpNatActive INTEGER
  fltCurCfgAclTcpUrg INTEGER
  fltCurCfgAclTcpAck INTEGER
  fltCurCfgAclTcpPsh INTEGER
  fltCurCfgAclTcpRst INTEGER
  fltCurCfgAclTcpSyn INTEGER
  fltCurCfgAclTcpFin INTEGER
  fltCurCfgAclIcmp INTEGER
  fltCurCfgAclIpOption INTEGER
  fltCurCfgBwmContract Integer32
  fltCurCfgAclIpTos INTEGER
  fltCurCfgAclIpTosMask INTEGER
  fltCurCfgAclIpTosNew INTEGER
  fltCurCfgFwlb INTEGER
  fltCurCfgNatTimeout INTEGER
  fltCurCfgLinklb INTEGER
  fltCurCfgWapRadiusSnoop INTEGER
  fltCurCfgIdslbHash INTEGER
  fltCurCfgVlan INTEGER
  fltCurCfgTcpRateLimit INTEGER
  fltCurCfgTcpRateMaxConn INTEGER
  fltCurCfgHash INTEGER
  fltCurCfgLayer7DenyState INTEGER
  fltCurCfgLayer7DenyUrlBmap OCTET STRING
  fltCurCfgGotoFilter Integer32
  fltCurCfgRadiusWapPersist INTEGER
  fltCurCfgPbind INTEGER
  fltCurCfgTimeWindow INTEGER
  fltCurCfgHoldDuration INTEGER
  fltCurCfgProxyIp IpAddress
  fltCurCfgPatternMatch INTEGER
  fltCurCfgLayer7DenyMatchAll INTEGER
  fltCurCfgLayer7ParseAll INTEGER
  fltCurCfgSecurityParseAll INTEGER
  fltCurCfgPatternMatchGroupBmap OCTET STRING
  fltCurCfg8021pBitsValue INTEGER
  fltCurCfg8021pBitsMatch INTEGER
  fltCurCfgAclIpLength INTEGER
  fltCurCfgIdsGroup Integer32
  fltCurCfgEgressPip INTEGER
  fltCurCfgDbind INTEGER
  fltCurCfgReverse INTEGER
  fltCurCfgRevBwmContract Integer32
  fltCurCfgParseChn INTEGER
  fltCurCfgRtpBwmContract Integer32
  fltCurCfgSipParsing INTEGER
  fltCurCfgSessionMirror INTEGER
  fltCurCfgIpVer INTEGER
  fltCurCfgIpv6Sip DisplayString
  fltCurCfgIpv6Sprefix INTEGER
  fltCurCfgIpv6Dip DisplayString
  fltCurCfgIpv6Dprefix INTEGER
  fltCurCfgHdrHash INTEGER
  fltCurCfgHdrName DisplayString
  fltCurCfgHdrHashLen INTEGER
  fltCurCfgName DisplayString
  fltCurCfgNatIp IpAddress
  fltCurCfgIpv6Nip DisplayString
  fltCurCfgIpv6Proxy DisplayString
  fltCurCfgL7SipFilt INTEGER
  fltCurCfgL3Filter INTEGER
  fltCurCfgNatMcastVlan INTEGER
  fltCurCfgNbind INTEGER

FltNewCfgTableEntry  
SEQUENCE    
  fltNewCfgIndx Integer32
  fltNewCfgSrcIpMac INTEGER
  fltNewCfgSrcIp IpAddress
  fltNewCfgSrcIpMask IpAddress
  fltNewCfgDstIpMac INTEGER
  fltNewCfgDstIp IpAddress
  fltNewCfgDstIpMask IpAddress
  fltNewCfgProtocol INTEGER
  fltNewCfgRangeLowSrcPort INTEGER
  fltNewCfgRangeHighSrcPort INTEGER
  fltNewCfgRangeLowDstPort INTEGER
  fltNewCfgRangeHighDstPort INTEGER
  fltNewCfgAction INTEGER
  fltNewCfgRedirPort INTEGER
  fltNewCfgRedirGroup Integer32
  fltNewCfgLog INTEGER
  fltNewCfgState INTEGER
  fltNewCfgNat INTEGER
  fltNewCfgCache INTEGER
  fltNewCfgInvert INTEGER
  fltNewCfgClientProxy INTEGER
  fltNewCfgTcpAck INTEGER
  fltNewCfgSrcMac PhysAddress
  fltNewCfgDstMac PhysAddress
  fltNewCfgFtpNatActive INTEGER
  fltNewCfgAclTcpUrg INTEGER
  fltNewCfgAclTcpAck INTEGER
  fltNewCfgAclTcpPsh INTEGER
  fltNewCfgAclTcpRst INTEGER
  fltNewCfgAclTcpSyn INTEGER
  fltNewCfgAclTcpFin INTEGER
  fltNewCfgAclIcmp INTEGER
  fltNewCfgAclIpOption INTEGER
  fltNewCfgBwmContract Integer32
  fltNewCfgAclIpTos INTEGER
  fltNewCfgAclIpTosMask INTEGER
  fltNewCfgAclIpTosNew INTEGER
  fltNewCfgFwlb INTEGER
  fltNewCfgNatTimeout INTEGER
  fltNewCfgLinklb INTEGER
  fltNewCfgWapRadiusSnoop INTEGER
  fltNewCfgIdslbHash INTEGER
  fltNewCfgVlan INTEGER
  fltNewCfgName DisplayString
  fltNewCfgTcpRateLimit INTEGER
  fltNewCfgTcpRateMaxConn INTEGER
  fltNewCfgHash INTEGER
  fltNewCfgLayer7DenyState INTEGER
  fltNewCfgLayer7DenyUrlBmap OCTET STRING
  fltNewCfgLayer7DenyAddUrl Integer32
  fltNewCfgLayer7DenyRemUrl Integer32
  fltNewCfgGotoFilter Integer32
  fltNewCfgRadiusWapPersist INTEGER
  fltNewCfgPbind INTEGER
  fltNewCfgTimeWindow INTEGER
  fltNewCfgHoldDuration INTEGER
  fltNewCfgProxyIp IpAddress
  fltNewCfgPatternMatch INTEGER
  fltNewCfgLayer7DenyMatchAll INTEGER
  fltNewCfgLayer7ParseAll INTEGER
  fltNewCfgSecurityParseAll INTEGER
  fltNewCfgPatternMatchGroupBmap OCTET STRING
  fltNewCfgAddPatternMatchGroup Integer32
  fltNewCfgRemPatternMatchGroup Integer32
  fltNewCfg8021pBitsValue INTEGER
  fltNewCfg8021pBitsMatch INTEGER
  fltNewCfgAclIpLength INTEGER
  fltNewCfgIdsGroup Integer32
  fltNewCfgEgressPip INTEGER
  fltNewCfgDbind INTEGER
  fltNewCfgReverse INTEGER
  fltNewCfgRevBwmContract Integer32
  fltNewCfgParseChn INTEGER
  fltNewCfgRtpBwmContract Integer32
  fltNewCfgSipParsing INTEGER
  fltNewCfgSessionMirror INTEGER
  fltNewCfgIpVer INTEGER
  fltNewCfgIpv6Sip DisplayString
  fltNewCfgIpv6Sprefix INTEGER
  fltNewCfgIpv6Dip DisplayString
  fltNewCfgIpv6Dprefix INTEGER
  fltNewCfgHdrHash INTEGER
  fltNewCfgHdrName DisplayString
  fltNewCfgHdrHashLen INTEGER
  fltNewCfgL3Filter INTEGER
  fltNewCfgDelete INTEGER
  fltNewCfgNatIp IpAddress
  fltNewCfgIpv6Nip DisplayString
  fltNewCfgIpv6Proxy DisplayString
  fltNewCfgL7SipFilt INTEGER
  fltNewCfgNatMcastVlan INTEGER
  fltNewCfgNbind INTEGER

FltNewCfgExtendedTableEntry  
SEQUENCE    
  fltNewCfgExtendedIndx Integer32
  fltNewCfgExtendedLayer7DenyState INTEGER
  fltNewCfgExtendedLayer7DenyUrlBmap OCTET STRING
  fltNewCfgExtendedLayer7DenyAddUrl Integer32
  fltNewCfgExtendedLayer7DenyRemUrl Integer32
  fltNewCfgExtendedGotoFilter Integer32
  fltNewCfgExtendedRadiusWapPersist INTEGER
  fltNewCfgExtendedPbind INTEGER
  fltNewCfgExtendedTimeWindow INTEGER
  fltNewCfgExtendedHoldDuration INTEGER
  fltNewCfgExtendedProxyIp IpAddress
  fltNewCfgExtendedPatternMatch INTEGER
  fltNewCfgExtendedLayer7DenyMatchAll INTEGER
  fltNewCfgExtendedLayer7ParseAll INTEGER
  fltNewCfgExtendedSecurityParseAll INTEGER
  fltNewCfgExtendedPatternMatchGroupBmap OCTET STRING
  fltNewCfgExtendedAddPatternMatchGroup Integer32
  fltNewCfgExtendedRemPatternMatchGroup Integer32
  fltNewCfgExtended8021pBitsValue INTEGER
  fltNewCfgExtended8021pBitsMatch INTEGER
  fltNewCfgExtendedAclIpLength INTEGER
  fltNewCfgExtendedIdsGroup Integer32
  fltNewCfgExtendedEgressPip INTEGER
  fltNewCfgExtendedDbind INTEGER
  fltNewCfgExtendedReverse INTEGER
  fltNewCfgExtendedRevBwmContract Integer32
  fltNewCfgExtendedParseChn INTEGER
  fltNewCfgExtendedRtpBwmContract Integer32
  fltNewCfgExtendedSipParsing INTEGER
  fltNewCfgExtendedSessionMirror INTEGER
  fltNewCfgExtendedIpVer INTEGER
  fltNewCfgExtendedIpv6Sip DisplayString
  fltNewCfgExtendedIpv6Sprefix INTEGER
  fltNewCfgExtendedIpv6Dip DisplayString
  fltNewCfgExtendedIpv6Dprefix INTEGER
  fltNewCfgExtendedHdrHash INTEGER
  fltNewCfgExtendedHdrName DisplayString
  fltNewCfgExtendedHdrHashLen INTEGER
  fltNewCfgExtendedNatIp IpAddress
  fltNewCfgExtendedIpv6Nip DisplayString
  fltNewCfgExtendedIpv6Proxy DisplayString
  fltNewCfgExtendedL7SipFilt INTEGER
  fltNewCfgExtendedL3State INTEGER
  fltNewCfgExtendedNatMcastVlan INTEGER
  fltNewCfgExtendedNbind INTEGER

FltCurCfgPortTableEntry  
SEQUENCE    
  fltCurCfgPortIndx Integer32
  fltCurCfgPortState INTEGER
  fltCurCfgPortFiltBmap OCTET STRING

FltNewCfgPortTableEntry  
SEQUENCE    
  fltNewCfgPortIndx Integer32
  fltNewCfgPortState INTEGER
  fltNewCfgPortFiltBmap OCTET STRING
  fltNewCfgPortAddFiltRule Integer32
  fltNewCfgPortRemFiltRule Integer32

FltCurCfgUrlBwmEntry  
SEQUENCE    
  fltCurCfgUrlBwmFltIndex Integer32
  fltCurCfgUrlBwmUrlId Integer32
  fltCurCfgUrlReverseBwmContract Integer32
  fltCurCfgUrlBwmContract Integer32

FltNewCfgUrlBwmEntry  
SEQUENCE    
  fltNewCfgUrlBwmFltIndex Integer32
  fltNewCfgUrlBwmUrlId Integer32
  fltNewCfgUrlBwmContract Integer32
  fltNewCfgUrlReverseBwmContract Integer32
  fltNewCfgUrlBwmDelete INTEGER

FltCurCfgHttpRedirMappingEntry  
SEQUENCE    
  fltCurCfgHttpRedirMappingFilter Integer32
  fltCurCfgHttpRedirMappingFromStr INTEGER
  fltCurCfgHttpRedirMappingToStr INTEGER

FltNewCfgHttpRedirMappingEntry  
SEQUENCE    
  fltNewCfgHttpRedirMappingFilter Integer32
  fltNewCfgHttpRedirMappingFromStr INTEGER
  fltNewCfgHttpRedirMappingToStr INTEGER
  fltNewCfgHttpRedirMappingDelete INTEGER

GslbCurCfgRemSiteTableEntry  
SEQUENCE    
  gslbCurCfgRemSiteIndx Integer32
  gslbCurCfgRemSitePrimaryIp IpAddress
  gslbCurCfgRemSiteSecondaryIp IpAddress
  gslbCurCfgRemSiteState INTEGER
  gslbCurCfgRemSiteUpdate INTEGER
  gslbCurCfgRemSiteName DisplayString
  gslbCurCfgRemSitePrimaryIPVer INTEGER
  gslbCurCfgRemSitePrimaryIp6 DisplayString
  gslbCurCfgRemSiteSecondaryIPVer INTEGER
  gslbCurCfgRemSiteSecondaryIp6 DisplayString

GslbNewCfgRemSiteTableEntry  
SEQUENCE    
  gslbNewCfgRemSiteIndx Integer32
  gslbNewCfgRemSitePrimaryIp IpAddress
  gslbNewCfgRemSiteSecondaryIp IpAddress
  gslbNewCfgRemSiteState INTEGER
  gslbNewCfgRemSiteUpdate INTEGER
  gslbNewCfgRemSiteDelete INTEGER
  gslbNewCfgRemSiteName DisplayString
  gslbNewCfgRemSitePrimaryIPVer INTEGER
  gslbNewCfgRemSitePrimaryIp6 DisplayString
  gslbNewCfgRemSiteSecondaryIPVer INTEGER
  gslbNewCfgRemSiteSecondaryIp6 DisplayString

GslbCurCfgEnhNetworkTableEntry  
SEQUENCE    
  gslbCurCfgEnhNetworkIndx Integer32
  gslbCurCfgEnhNetworkState INTEGER
  gslbCurCfgEnhNetworkSourceIp IpAddress
  gslbCurCfgEnhNetworkNetMask IpAddress
  gslbCurCfgEnhNetworkVirtServer OCTET STRING
  gslbCurCfgEnhNetworkRemRealServer OCTET STRING
  gslbCurCfgEnhNetworkSourceIpV6 DisplayString
  gslbCurCfgEnhNetworkVer INTEGER
  gslbCurCfgEnhNetworkSprefix INTEGER

GslbNewCfgEnhNetworkTableEntry  
SEQUENCE    
  gslbNewCfgEnhNetworkIndx Integer32
  gslbNewCfgEnhNetworkState INTEGER
  gslbNewCfgEnhNetworkSourceIp IpAddress
  gslbNewCfgEnhNetworkNetMask IpAddress
  gslbNewCfgEnhNetworkDelete INTEGER
  gslbNewCfgEnhNetworkVirtServer OCTET STRING
  gslbNewCfgEnhNetworkRemRealServer OCTET STRING
  gslbNewCfgEnhNetworkAddVirtServer Integer32
  gslbNewCfgEnhNetworkRemoveVirtServer Integer32
  gslbNewCfgEnhNetworkAddRemRealServer Integer32
  gslbNewCfgEnhNetworkRemoveRemRealServer Integer32
  gslbNewCfgEnhNetworkSourceIpV6 DisplayString
  gslbNewCfgEnhNetworkVer INTEGER
  gslbNewCfgEnhNetworkSprefix INTEGER

GslbCurCfgRuleTableEntry  
SEQUENCE    
  gslbCurCfgRuleIndx Integer32
  gslbCurCfgRuleState INTEGER
  gslbCurCfgRuleStartHour INTEGER
  gslbCurCfgRuleStartMin INTEGER
  gslbCurCfgRuleEndHour INTEGER
  gslbCurCfgRuleEndMin INTEGER
  gslbCurCfgRuleTTL INTEGER
  gslbCurCfgRuleRR INTEGER
  gslbCurCfgRuleDname DisplayString

GslbNewCfgRuleTableEntry  
SEQUENCE    
  gslbNewCfgRuleIndx Integer32
  gslbNewCfgRuleState INTEGER
  gslbNewCfgRuleStartHour INTEGER
  gslbNewCfgRuleStartMin INTEGER
  gslbNewCfgRuleEndHour INTEGER
  gslbNewCfgRuleEndMin INTEGER
  gslbNewCfgRuleTTL INTEGER
  gslbNewCfgRuleRR INTEGER
  gslbNewCfgRuleDname DisplayString
  gslbNewCfgRuleDelete INTEGER

GslbCurCfgMetricTableEntry  
SEQUENCE    
  gslbCurCfgRuleMetricIndx Integer32
  gslbCurCfgMetricIndx Integer32
  gslbCurCfgMetricMetric INTEGER
  gslbCurCfgMetricNetworkBmap OCTET STRING

GslbNewCfgMetricTableEntry  
SEQUENCE    
  gslbNewCfgRuleMetricIndx Integer32
  gslbNewCfgMetricIndx Integer32
  gslbNewCfgMetricMetric INTEGER
  gslbNewCfgMetricNetworkBmap OCTET STRING
  gslbNewCfgMetricAddNetwork Integer32
  gslbNewCfgMetricRemNetwork Integer32

GslbCurDnsSecKeyEntry  
SEQUENCE    
  gslbCurDnsSecKeyID DisplayString
  gslbCurDnsSecKeyUseCount INTEGER
  gslbCurDnsSecKeyType INTEGER
  gslbCurDnsSecKeyStatus INTEGER
  gslbCurDnsSecKeySize INTEGER
  gslbCurDnsSecKeyAlgo INTEGER
  gslbCurDnsSecKeyTTL INTEGER
  gslbCurDnsSecKeyExpPeriod Unsigned32
  gslbCurDnsSecKeyRollOverPeriod Unsigned32
  gslbCurDnsSecKeyValidityPeriod Unsigned32
  gslbCurDnsSecKeyPublicationPeriod Unsigned32

GslbNewDnsSecKeyEntry  
SEQUENCE    
  gslbNewDnsSecKeyID DisplayString
  gslbNewDnsSecKeyUseCount INTEGER
  gslbNewDnsSecKeyType INTEGER
  gslbNewDnsSecKeyStatus INTEGER
  gslbNewDnsSecKeySize INTEGER
  gslbNewDnsSecKeyAlgo INTEGER
  gslbNewDnsSecKeyTTL INTEGER
  gslbNewDnsSecKeyExpPeriod Unsigned32
  gslbNewDnsSecKeyRollOverPeriod Unsigned32
  gslbNewDnsSecKeyValidityPeriod Unsigned32
  gslbNewDnsSecKeyPublicationPeriod Unsigned32
  gslbNewDnsSecKeyDelete INTEGER
  gslbNewDnsSecKeyGenerate INTEGER
  gslbNewDnsSecKeyGenerateStatus INTEGER

GslbCurDnsSecZoneEntry  
SEQUENCE    
  gslbCurDnsSecZoneID DisplayString
  gslbCurDnsSecZoneName DisplayString
  gslbCurDnsSecZoneKSK1 DisplayString
  gslbCurDnsSecZoneKSK2 DisplayString
  gslbCurDnsSecZoneKSK3 DisplayString
  gslbCurDnsSecZoneZSK1 DisplayString
  gslbCurDnsSecZoneZSK2 DisplayString
  gslbCurDnsSecZoneZSK3 DisplayString
  gslbCurDnsSecZoneStatus INTEGER
  gslbCurDnsSecZoneParentIPVer INTEGER
  gslbCurDnsSecZoneParentIPv4 IpAddress
  gslbCurDnsSecZoneParentIPv6 DisplayString

GslbNewDnsSecZoneEntry  
SEQUENCE    
  gslbNewDnsSecZoneID DisplayString
  gslbNewDnsSecZoneName DisplayString
  gslbNewDnsSecZoneKSK1 DisplayString
  gslbNewDnsSecZoneKSK2 DisplayString
  gslbNewDnsSecZoneKSK3 DisplayString
  gslbNewDnsSecZoneZSK1 DisplayString
  gslbNewDnsSecZoneZSK2 DisplayString
  gslbNewDnsSecZoneZSK3 DisplayString
  gslbNewDnsSecZoneStatus INTEGER
  gslbNewDnsSecZoneParentIPVer INTEGER
  gslbNewDnsSecZoneParentIPv4 IpAddress
  gslbNewDnsSecZoneParentIPv6 DisplayString
  gslbNewDnsSecZoneDelete INTEGER

GslbCurDnsResVipEntry  
SEQUENCE    
  gslbCurDnsResVipIndex1 INTEGER
  gslbCurDnsResVipIndex2 INTEGER
  gslbCurDnsResVipName DisplayString
  gslbCurDnsResVipIPVer INTEGER
  gslbCurDnsResVipV4 IpAddress
  gslbCurDnsResVipV6 DisplayString
  gslbCurDnsResVipStatus INTEGER

GslbNewDnsResVipEntry  
SEQUENCE    
  gslbNewDnsResVipIndex1 INTEGER
  gslbNewDnsResVipIndex2 INTEGER
  gslbNewDnsResVipName DisplayString
  gslbNewDnsResVipIPVer INTEGER
  gslbNewDnsResVipV4 IpAddress
  gslbNewDnsResVipV6 DisplayString
  gslbNewDnsResVipStatus INTEGER
  gslbNewDnsResVipDelete INTEGER

GslbDnsResVipEmptyIndexesEntry  
SEQUENCE    
  gslbDnsResVipEmptyIndexesIndex INTEGER

HcsCurCfgTableEntry  
SEQUENCE    
  hcsCurCfgScriptIndex Integer32
  hcsCurCfgScriptString OCTET STRING

HcsNewCfgTableEntry  
SEQUENCE    
  hcsNewCfgScriptIndex Integer32
  hcsNewCfgScriptString OCTET STRING
  hcsNewCfgAddSendCmd DisplayString
  hcsNewCfgAddExpectCmd DisplayString
  hcsNewCfgAddCloseCmd INTEGER
  hcsNewCfgRemLastCmd INTEGER
  hcsNewCfgAddWaitCmd INTEGER
  hcsNewCfgAddOffsetCmd INTEGER
  hcsNewCfgAddOpenProtCmd DisplayString
  hcsNewCfgAddDepthCmd INTEGER
  hcsNewCfgAddLongNsendCmd OCTET STRING
  hcsNewCfgAddLongNexpectCmd OCTET STRING
  hcsNewCfgAddNsendCmd DisplayString
  hcsNewCfgAddNexpectCmd DisplayString
  hcsNewCfgAddLongBsendCmd OCTET STRING
  hcsNewCfgAddLongBexpectCmd OCTET STRING
  hcsNewCfgAddLongSendCmd OCTET STRING
  hcsNewCfgAddLongExpectCmd OCTET STRING
  hcsNewCfgDeleteScript INTEGER

SnmphcCurCfgTableEntry  
SEQUENCE    
  snmphcCurCfgIndex Integer32
  snmphcCurCfgOid DisplayString
  snmphcCurCfgCommString DisplayString
  snmphcCurCfgRcvContent DisplayString
  snmphcCurCfgInvert INTEGER
  snmphcCurCfgUseWeight INTEGER

SnmphcNewCfgTableEntry  
SEQUENCE    
  snmphcNewCfgIndex Integer32
  snmphcNewCfgOid DisplayString
  snmphcNewCfgCommString DisplayString
  snmphcNewCfgRcvContent DisplayString
  snmphcNewCfgInvert INTEGER
  snmphcNewCfgDeleteHc INTEGER
  snmphcNewCfgUseWeight INTEGER

PipCurCfgTableEntry  
SEQUENCE    
  pipCurCfgPip IpAddress
  pipCurCfgPortMap OCTET STRING
  pipCurCfgVlanMap OCTET STRING

PipNewCfgTableEntry  
SEQUENCE    
  pipNewCfgPip IpAddress
  pipNewCfgPortMap OCTET STRING
  pipNewCfgVlanMap OCTET STRING
  pipNewCfgDelete INTEGER
  pipNewCfgAddPortVlan Integer32
  pipNewCfgRemovePortVlan Integer32
  pipNewCfgAddPort Integer32
  pipNewCfgAddVlan Integer32
  pipNewCfgRemovePort Integer32
  pipNewCfgRemoveVlan Integer32

Pip6CurCfgTableEntry  
SEQUENCE    
  pip6CurCfgPip DisplayString
  pip6CurCfgPortMap OCTET STRING
  pip6CurCfgVlanMap OCTET STRING

Pip6NewCfgTableEntry  
SEQUENCE    
  pip6NewCfgPip DisplayString
  pip6NewCfgPortMap OCTET STRING
  pip6NewCfgVlanMap OCTET STRING
  pip6NewCfgDelete INTEGER
  pip6NewCfgAddPortVlan Integer32
  pip6NewCfgRemovePortVlan Integer32
  pip6NewCfgAddPort Integer32
  pip6NewCfgAddVlan Integer32
  pip6NewCfgRemovePort Integer32
  pip6NewCfgRemoveVlan Integer32

SlbStatSpRealServerEntry  
SEQUENCE    
  slbStatSpRealServerSpIndex Integer32
  slbStatSpRealServerServerIndex Integer32
  slbStatSpRealServerCurrSessions Gauge32
  slbStatSpRealServerTotalSessions Counter32
  slbStatSpRealServerHCOctetsLow32 Counter32
  slbStatSpRealServerHCOctetsHigh32 Counter32
  slbStatSpRealServerHCOctets Counter64

SlbStatSpFltEntry  
SEQUENCE    
  slbStatSpFltSpIndex Integer32
  slbStatSpFltIndex Integer32
  slbStatSpFltFirings Counter32

SlbStatSpMaintEntry  
SEQUENCE    
  slbStatSpMaintSpIndex Integer32
  slbStatSpMaintMaximumSessions Integer32
  slbStatSpMaintCurBindings Gauge32
  slbStatSpMaintCurBindings4Seconds Gauge32
  slbStatSpMaintCurBindings64Seconds Gauge32
  slbStatSpMaintTerminatedSessions Counter32
  slbStatSpMaintBindingFails Counter32
  slbStatSpMaintNonTcpFrames Counter32
  slbStatSpMaintTcpFragments Counter32
  slbStatSpMaintUdpDatagrams Counter32
  slbStatSpMaintIncorrectVIPs Counter32
  slbStatSpMaintIncorrectVports Counter32
  slbStatSpMaintRealServerNoAvails Counter32
  slbStatSpMaintFilteredDeniedFrames Counter32
  slbStatSpMaintLandAttacks Counter32
  slbStatSpMaintIpFragTotalSessions Counter32
  slbStatSpMaintIpFragCurSessions Gauge32
  slbStatSpMaintIpFragDiscards Counter32
  slbStatSpMaintIpFragTableFull Counter32
  slbStatSpMaintClear INTEGER
  slbStatSpMaintOOSFinPktDrops Counter32
  slbStatSpMaintSymSessions Counter32
  slbStatSpMaintSymValidSegments Counter32
  slbStatSpMaintSymFragSessions Counter32
  slbStatSpMaintSymSegAllocFails Counter32
  slbStatSpMaintSymBufferAllocFails Counter32
  slbStatSpMaintSymConnAllocFails Counter32
  slbStatSpMaintSymInvalidBuffers Counter32
  slbStatSpMaintSymSegReallocFails Counter32
  slbStatSpMaintSymPacketsIn Counter32
  slbStatSpMaintSymPacketsWithNoData Counter32
  slbStatSpMaintSymTcpPackets Counter32
  slbStatSpMaintSymUdpPackets Counter32
  slbStatSpMaintSymIcmpPackets Counter32
  slbStatSpMaintSymOtherPackets Counter32
  slbStatSpMaintSymMatchCount Counter32
  slbStatSpMaintSymFetchErrors Counter32
  slbStatSpMaintSymTruncPayloadToMp Counter32
  slbStatSpMaintSymPacketsInFastPath Counter32

SlbStatSpAuxSessEntry  
SEQUENCE    
  slbStatSpAuxSessSpIndex Integer32
  slbStatSpAuxSessIndex Integer32
  slbStatSpAuxSessCurConn Gauge32
  slbStatSpAuxSessMaxConn Integer32
  slbStatSpAuxSessAllocFails Counter32

SlbStatRServerEntry  
SEQUENCE    
  slbStatRServerIndex Integer32
  slbStatRServerCurrSessions Gauge32
  slbStatRServerTotalSessions Counter32
  slbStatRServerFailures Counter32
  slbStatRServerHighestSessions Counter32
  slbStatRServerHCOctetsLow32 Counter32
  slbStatRServerHCOctetsHigh32 Counter32
  slbStatRServerHCOctets Counter64

SlbStatGroupEntry  
SEQUENCE    
  slbStatGroupIndex Integer32
  slbStatGroupCurrSessions Gauge32
  slbStatGroupTotalSessions Counter32
  slbStatGroupHighestSessions Counter32
  slbStatGroupHCOctetsLow32 Counter32
  slbStatGroupHCOctetsHigh32 Counter32
  slbStatGroupWlmUpdates Counter32
  slbStatGroupHCOctets Counter64

SlbStatVServerEntry  
SEQUENCE    
  slbStatVServerIndex Integer32
  slbStatVServerCurrSessions Gauge32
  slbStatVServerTotalSessions Counter32
  slbStatVServerHighestSessions Counter32
  slbStatVServerHCOctetsLow32 Counter32
  slbStatVServerHCOctetsHigh32 Counter32
  slbStatVServerHeaderHits Counter32
  slbStatVServerHeaderMisses Counter32
  slbStatVServerHeaderTotalSessions Counter32
  slbStatVServerCookieRewrites Counter32
  slbStatVServerCookieInserts Counter32
  slbStatVServerHCOctets Counter64
  slbStatVServerIpAddress DisplayString

FltStatTableEntry  
SEQUENCE    
  fltStatFltIndex Integer32
  fltStatFltFirings Counter32

GslbStatRemRealServerEntry  
SEQUENCE    
  gslbStatRemRealServerIndex Integer32
  gslbStatRemRealServerDnsHandoffs Counter32
  gslbStatRemRealServerHttpRedirs Counter32

GslbStatGroupEntry  
SEQUENCE    
  gslbStatGroupIndex Integer32
  gslbStatGroupDnsHandoffs Counter32
  gslbStatGroupHttpRedirs Counter32

GslbStatVirtServerEntry  
SEQUENCE    
  gslbStatVirtServerIdx Integer32
  gslbStatVirtServerServiceIdx Integer32
  gslbStatVirtServerRserverIdx Integer32
  gslbStatVirtServerVirtPort Integer32
  gslbStatVirtServerIpAddress IpAddress
  gslbStatVirtServerResponseTime Integer32
  gslbStatVirtServerMinSessAvail Gauge32
  gslbStatVirtServerDname DisplayString
  gslbStatVirtServerRemSite Integer32
  gslbStatVirtDnsDirect Counter32

GslbStatRemSiteTableEntry  
SEQUENCE    
  gslbStatRemSiteIdx Integer32
  gslbStatRemSiteOutUpdates Counter32
  gslbStatRemSiteInUpdates Counter32
  gslbStatRemSiteOutUpdates2 Counter32
  gslbStatRemSiteInUpdates2 Counter32
  gslbStatRemSiteInBadUpdates Counter32

GslbStatEnhNetworkTableEntry  
SEQUENCE    
  gslbStatEnhNetworkIdx Integer32
  gslbStatEnhNetworkHit Counter32

GslbStatRuleTableEntry  
SEQUENCE    
  gslbStatRuleIdx Integer32
  gslbStatRuleLeastconns Counter32
  gslbStatRuleRoundrobin Counter32
  gslbStatRuleMinmisses Counter32
  gslbStatRuleHash Counter32
  gslbStatRuleResponse Counter32
  gslbStatRuleGeographical Counter32
  gslbStatRuleNetwork Counter32
  gslbStatRuleRandom Counter32
  gslbStatRuleAvailability Counter32
  gslbStatRuleQos Counter32
  gslbStatRulePersistence Counter32
  gslbStatRuleLocal Counter32
  gslbStatRuleAlways Counter32
  gslbStatRuleRemote Counter32
  gslbStatRuleTotal Counter32

SlbStatAuxSessEntry  
SEQUENCE    
  slbStatAuxSessIndex Integer32
  slbStatAuxSessCurConn Gauge32
  slbStatAuxSessMaxConn Integer32
  slbStatAuxSessAllocFails Counter32

SlbStatVirtServiceEntry  
SEQUENCE    
  slbStatVirtServerIndex Integer32
  slbStatVirtServiceIndex Integer32
  slbStatRealServerIndex Integer32
  slbStatVirtServiceCurrSessions Gauge32
  slbStatVirtServiceTotalSessions Counter32
  slbStatVirtServiceHighestSessions Counter32
  slbStatVirtServiceHCOctetsLow32 Counter32
  slbStatVirtServiceHCOctetsHigh32 Counter32
  slbStatVirtServiceHCOctets Counter64

SlbStatWlmEntry  
SEQUENCE    
  slbStatWlmIndex Integer32
  slbStatWlmRegReq Counter32
  slbStatWlmRegRep Counter32
  slbStatWlmRegRepErr Counter32
  slbStatWlmDeregReq Counter32
  slbStatWlmDeregRep Counter32
  slbStatWlmDeregRepErr Counter32
  slbStatWlmLbStateReq Counter32
  slbStatWlmLbStateRep Counter32
  slbStatWlmLbStateRepErr Counter32
  slbStatWlmMembStateReq Counter32
  slbStatWlmMembStateRep Counter32
  slbStatWlmMembStateRepErr Counter32
  slbStatWlmWtMsgRecv Counter32
  slbStatWlmWtMsgParErr Counter32
  slbStatWlmTotInvalidLb Counter32
  slbStatWlmTotInvalidGrp Counter32
  slbStatWlmTotInvalidRealSer Counter32
  slbStatWlmMsgInvalidSASPHeader Counter32
  slbStatWlmMsgParseErr Counter32
  slbStatWlmMsgUnsupMsgType Counter32

SlbRealServerInfoEntry  
SEQUENCE    
  slbRealServerInfoIndex Integer32
  slbRealServerInfoIpAddr IpAddress
  slbRealServerMacAddr PhysAddress
  slbRealServerInfoSwitchPort Integer32
  slbRealServerInfoHealthLayer INTEGER
  slbRealServerInfoOverflow INTEGER
  slbRealServerInfoState INTEGER
  slbRealServerInfoVlan Integer32

SlbRealServerRportInfoEntry  
SEQUENCE    
  slbRealServerRportRealIndex Integer32
  slbRealServerRportServIndex Integer32
  slbRealServerRportInfoRport Integer32
  slbRealServerRportInfoState INTEGER
  slbRealServerRportInfoGroup INTEGER

SlbVirtServicesInfoEntry  
SEQUENCE    
  slbVirtServicesInfoVirtServIndex Integer32
  slbVirtServicesInfoSvcIndex Integer32
  slbVirtServicesInfoRealServIndex Integer32
  slbVirtServicesInfoVport Integer32
  slbVirtServicesInfoRport Integer32
  slbVirtServicesInfoState INTEGER
  slbVirtServicesInfoResponseTime Integer32
  slbVirtServicesInfoWeight Integer32

SlbSessionInfoEntry  
SEQUENCE    
  slbSessionInfoSpIndex Integer32
  slbSessionInfoIndex Integer32
  slbSessionInfoString OCTET STRING

GslbInfoRemRealServerEntry  
SEQUENCE    
  gslbInfoRemRealServerIdx Integer32
  gslbInfoRemRealServerIpAddr IpAddress
  gslbInfoRemRealServerName DisplayString
  gslbInfoRemRealServerState INTEGER

GslbInfoVirtServerEntry  
SEQUENCE    
  gslbInfoVirtServerIdx Integer32
  gslbInfoVirtServerServiceIdx Integer32
  gslbInfoVirtServerRserverIdx Integer32
  gslbInfoVirtServerDname DisplayString
  gslbInfoVirtServerVirtPort Integer32
  gslbInfoVirtServerIpAddress IpAddress
  gslbInfoVirtServerResponse Integer32
  gslbInfoVirtServerSessAvail Integer32
  gslbInfoVirtServerSessCur Integer32
  gslbInfoVirtServerSessMax Integer32
  gslbInfoVirtServerSessUtil INTEGER
  gslbInfoVirtServerCpuUtil INTEGER
  gslbInfoVirtServerRemSite Integer32
  gslbInfoVirtServerWeight INTEGER
  gslbInfoVirtServerAvail INTEGER
  gslbInfoVirtServerRegion INTEGER

GslbInfoRemSiteEntry  
SEQUENCE    
  gslbInfoRemSiteIdx Integer32
  gslbInfoRemSitePrimaryIp IpAddress
  gslbInfoRemSiteSecondaryIp IpAddress
  gslbInfoRemSiteName DisplayString
  gslbInfoRemSiteState INTEGER

GslbInfoDnsSecKeyEntry  
SEQUENCE    
  gslbInfoDnsSecKeyID DisplayString
  gslbInfoDnsSecKeyStatus INTEGER

SlbWlmInfoEntry  
SEQUENCE    
  slbWlmInfoIndex Integer32
  slbWlmInfoIpAddr IpAddress
  slbWlmInfoPort INTEGER
  slbWlmInfoState INTEGER

SlbPortInfoEntry  
SEQUENCE    
  slbPortInfoIndex Integer32
  slbPortClientState INTEGER
  slbPortSerState INTEGER
  slbPortFltState INTEGER
  slbPortRTSState INTEGER
  slbPortHotStandbyState INTEGER
  slbPortInterSWState INTEGER
  slbPortProxyState INTEGER
  slbPortIdSlbState INTEGER
  slbPortSymantecState INTEGER
  slbPortFitersAdded OCTET STRING

SlbOperRealServerEntry  
SEQUENCE    
  slbOperRealServerIndex Integer32
  slbOperRealServerStatus INTEGER

GslbOperDnsSecEntry  
SEQUENCE    
  gslbOperDnsSecKeyID DisplayString
  gslbOperDnsSecEmergencyRollover INTEGER
  gslbOperDnsSecImmediateRollover INTEGER

SlbOperGroupRealServerEntry  
SEQUENCE    
  slbOperRealServGroupIndex Integer32
  slbOperGroupRealServIndex Integer32
  slbOperGroupRealServerState INTEGER

SlbOperHttpCachePurgeEntry  
SEQUENCE    
  slbOperHttpCachePurgeServerIndex Integer32
  slbOperHttpCachePurgeServiceIndex Integer32
  slbOperHttpCachePurgeURL DisplayString

SlbCurCfgDrecordEntry  
SEQUENCE    
  slbCurCfgDrecordIndex INTEGER
  slbCurCfgDomainRecordState INTEGER
  slbCurCfgDomainRecordName DisplayString

SlbNewCfgDrecordEntry  
SEQUENCE    
  slbNewCfgDrecordIndex INTEGER
  slbNewCfgDomainRecordState INTEGER
  slbNewCfgDomainRecordName DisplayString
  slbNewCfgDrecordDelete INTEGER

SlbCurCfgDrecordVirtRealMappingEntry  
SEQUENCE    
  slbCurCfgDomainRecordIndex INTEGER
  slbCurCfgEntryIndex INTEGER
  slbCurCfgDrecordVirtServer Integer32
  slbCurCfgDrecordRealServer Integer32
  slbCurCfgDrecordEntryState INTEGER

SlbNewCfgDrecordVirtRealMappingEntry  
SEQUENCE    
  slbNewCfgDomainRecordIndex INTEGER
  slbNewCfgEntryIndex INTEGER
  slbNewCfgDrecordVirtServer Integer32
  slbNewCfgDrecordRealServer Integer32
  slbNewCfgDrecordEntryState INTEGER
  slbNewCfgDrecordEntryDelete INTEGER

SlbCurSslCfgSSLPolEntry  
SEQUENCE    
  slbCurSslCfgSSLPolNameIdIndex DisplayString
  slbCurSslCfgSSLPolName DisplayString
  slbCurSslCfgSSLPolPassInfoCipherName DisplayString
  slbCurSslCfgSSLPolPassInfoCipherFlag INTEGER
  slbCurSslCfgSSLPolPassInfoVersionName DisplayString
  slbCurSslCfgSSLPolPassInfoVersionFlag INTEGER
  slbCurSslCfgSSLPolPassInfoHeadBitsName DisplayString
  slbCurSslCfgSSLPolPassInfoHeadBitsFlag INTEGER
  slbCurSslCfgSSLPolPassInfoFrontend INTEGER
  slbCurSslCfgSSLPolCipherName INTEGER
  slbCurSslCfgSSLPolCipherUserdef DisplayString
  slbCurSslCfgSSLPolIntermcaChainName DisplayString
  slbCurSslCfgSSLPolIntermcaChainType DisplayString
  slbCurSslCfgSSLPolBecipher INTEGER
  slbCurSslCfgSSLPolAuthpol DisplayString
  slbCurSslCfgSSLPolConvuri DisplayString
  slbCurSslCfgSSLPolBessl INTEGER
  slbCurSslCfgSSLPolConvert INTEGER
  slbCurSslCfgSSLPolAdminStatus INTEGER

SlbNewSslCfgSSLPolEntry  
SEQUENCE    
  slbNewSslCfgSSLPolNameIdIndex DisplayString
  slbNewSslCfgSSLPolName DisplayString
  slbNewSslCfgSSLPolPassInfoCipherName DisplayString
  slbNewSslCfgSSLPolPassInfoCipherFlag INTEGER
  slbNewSslCfgSSLPolPassInfoVersionName DisplayString
  slbNewSslCfgSSLPolPassInfoVersionFlag INTEGER
  slbNewSslCfgSSLPolPassInfoHeadBitsName DisplayString
  slbNewSslCfgSSLPolPassInfoHeadBitsFlag INTEGER
  slbNewSslCfgSSLPolPassInfoFrontend INTEGER
  slbNewSslCfgSSLPolCipherName INTEGER
  slbNewSslCfgSSLPolCipherUserdef DisplayString
  slbNewSslCfgSSLPolIntermcaChainName DisplayString
  slbNewSslCfgSSLPolIntermcaChainType DisplayString
  slbNewSslCfgSSLPolBecipher INTEGER
  slbNewSslCfgSSLPolAuthpol DisplayString
  slbNewSslCfgSSLPolConvuri DisplayString
  slbNewSslCfgSSLPolBessl INTEGER
  slbNewSslCfgSSLPolConvert INTEGER
  slbNewSslCfgSSLPolAdminStatus INTEGER
  slbNewSslCfgSSLPolDel INTEGER

SlbCurSslCfgAuthPolEntry  
SEQUENCE    
  slbCurSslCfgAuthPolNameIdIndex DisplayString
  slbCurSslCfgAuthPolName DisplayString
  slbCurSslCfgAuthPolValidityMethod INTEGER
  slbCurSslCfgAuthPolValidityStaturi DisplayString
  slbCurSslCfgAuthPolValidityUriprior INTEGER
  slbCurSslCfgAuthPolValidityCachtime INTEGER
  slbCurSslCfgAuthPolValidityTimedev INTEGER
  slbCurSslCfgAuthPolValidityAlgorthmName DisplayString
  slbCurSslCfgAuthPolValidityVchain INTEGER
  slbCurSslCfgAuthPolValiditySecure INTEGER
  slbCurSslCfgAuthPolPassinfoVersionName DisplayString
  slbCurSslCfgAuthPolPassinfoVersionFlag INTEGER
  slbCurSslCfgAuthPolPassinfoSerialName DisplayString
  slbCurSslCfgAuthPolPassinfoSerialFlag INTEGER
  slbCurSslCfgAuthPolPassinfoAlgoName DisplayString
  slbCurSslCfgAuthPolPassinfoAlgoFlag INTEGER
  slbCurSslCfgAuthPolPassinfoIssuerName DisplayString
  slbCurSslCfgAuthPolPassinfoIssuerFlag INTEGER
  slbCurSslCfgAuthPolPassinfoNbeforeName DisplayString
  slbCurSslCfgAuthPolPassinfoNbeforeFlag INTEGER
  slbCurSslCfgAuthPolPassinfoNafterName DisplayString
  slbCurSslCfgAuthPolPassinfoNafterFlag INTEGER
  slbCurSslCfgAuthPolPassinfoSubjectName DisplayString
  slbCurSslCfgAuthPolPassinfoSubjectFlag INTEGER
  slbCurSslCfgAuthPolPassinfoKeytypeName DisplayString
  slbCurSslCfgAuthPolPassinfoKeytypeFlag INTEGER
  slbCurSslCfgAuthPolPassinfoMd5Name DisplayString
  slbCurSslCfgAuthPolPassinfoMd5Flag INTEGER
  slbCurSslCfgAuthPolPassinfoCertName DisplayString
  slbCurSslCfgAuthPolPassinfoCertFormat INTEGER
  slbCurSslCfgAuthPolPassinfoCertFlag INTEGER
  slbCurSslCfgAuthPolPassinfoCharset INTEGER
  slbCurSslCfgAuthPolTrustcaChainName DisplayString
  slbCurSslCfgAuthPolTrustcaChainType DisplayString
  slbCurSslCfgAuthPolCadepth INTEGER
  slbCurSslCfgAuthPolCaverify INTEGER
  slbCurSslCfgAuthPolFailurl DisplayString
  slbCurSslCfgAuthPolAdminStatus INTEGER
  slbCurSslCfgAuthPolPassinfoComp2424 INTEGER

SlbNewSslCfgAuthPolEntry  
SEQUENCE    
  slbNewSslCfgAuthPolNameIdIndex DisplayString
  slbNewSslCfgAuthPolName DisplayString
  slbNewSslCfgAuthPolValidityMethod INTEGER
  slbNewSslCfgAuthPolValidityStaturi DisplayString
  slbNewSslCfgAuthPolValidityUriprior INTEGER
  slbNewSslCfgAuthPolValidityCachtime INTEGER
  slbNewSslCfgAuthPolValidityTimedev INTEGER
  slbNewSslCfgAuthPolValidityAlgorthmName DisplayString
  slbNewSslCfgAuthPolValidityVchain INTEGER
  slbNewSslCfgAuthPolValiditySecure INTEGER
  slbNewSslCfgAuthPolPassinfoVersionName DisplayString
  slbNewSslCfgAuthPolPassinfoVersionFlag INTEGER
  slbNewSslCfgAuthPolPassinfoSerialName DisplayString
  slbNewSslCfgAuthPolPassinfoSerialFlag INTEGER
  slbNewSslCfgAuthPolPassinfoAlgoName DisplayString
  slbNewSslCfgAuthPolPassinfoAlgoFlag INTEGER
  slbNewSslCfgAuthPolPassinfoIssuerName DisplayString
  slbNewSslCfgAuthPolPassinfoIssuerFlag INTEGER
  slbNewSslCfgAuthPolPassinfoNbeforeName DisplayString
  slbNewSslCfgAuthPolPassinfoNbeforeFlag INTEGER
  slbNewSslCfgAuthPolPassinfoNafterName DisplayString
  slbNewSslCfgAuthPolPassinfoNafterFlag INTEGER
  slbNewSslCfgAuthPolPassinfoSubjectName DisplayString
  slbNewSslCfgAuthPolPassinfoSubjectFlag INTEGER
  slbNewSslCfgAuthPolPassinfoKeytypeName DisplayString
  slbNewSslCfgAuthPolPassinfoKeytypeFlag INTEGER
  slbNewSslCfgAuthPolPassinfoMd5Name DisplayString
  slbNewSslCfgAuthPolPassinfoMd5Flag INTEGER
  slbNewSslCfgAuthPolPassinfoCertName DisplayString
  slbNewSslCfgAuthPolPassinfoCertFormat INTEGER
  slbNewSslCfgAuthPolPassinfoCertFlag INTEGER
  slbNewSslCfgAuthPolPassinfoCharset INTEGER
  slbNewSslCfgAuthPolTrustcaChainName DisplayString
  slbNewSslCfgAuthPolTrustcaChainType DisplayString
  slbNewSslCfgAuthPolCadepth INTEGER
  slbNewSslCfgAuthPolCaverify INTEGER
  slbNewSslCfgAuthPolFailurl DisplayString
  slbNewSslCfgAuthPolAdminStatus INTEGER
  slbNewSslCfgAuthPolDelete INTEGER
  slbNewSslCfgAuthPolPassinfoComp2424 INTEGER

SlbCurSslCfgCertsEntry  
SEQUENCE    
  slbCurSslCfgCertsID DisplayString
  slbCurSslCfgCertsType INTEGER
  slbCurSslCfgCertsName DisplayString
  slbCurSslCfgCertsKeySize INTEGER
  slbCurSslCfgCertsExpirty DisplayString
  slbCurSslCfgCertsCommonName DisplayString
  slbCurSslCfgCertsHashAlgo INTEGER
  slbCurSslCfgCertsCountryName DisplayString
  slbCurSslCfgCertsPrpvinceName DisplayString
  slbCurSslCfgCertsLocalityName DisplayString
  slbCurSslCfgCertsOrganizationName DisplayString
  slbCurSslCfgCertsOrganizationUnitName DisplayString
  slbCurSslCfgCertsEMail DisplayString
  slbCurSslCfgCertsValidityPeriod INTEGER
  slbCurSslCfgCertsStatus INTEGER

SlbNewSslCfgCertsEntry  
SEQUENCE    
  slbNewSslCfgCertsID DisplayString
  slbNewSslCfgCertsType INTEGER
  slbNewSslCfgCertsName DisplayString
  slbNewSslCfgCertsKeySize INTEGER
  slbNewSslCfgCertsExpirty DisplayString
  slbNewSslCfgCertsCommonName DisplayString
  slbNewSslCfgCertsHashAlgo INTEGER
  slbNewSslCfgCertsCountryName DisplayString
  slbNewSslCfgCertsPrpvinceName DisplayString
  slbNewSslCfgCertsLocalityName DisplayString
  slbNewSslCfgCertsOrganizationName DisplayString
  slbNewSslCfgCertsOrganizationUnitName DisplayString
  slbNewSslCfgCertsEMail DisplayString
  slbNewSslCfgCertsValidityPeriod INTEGER
  slbNewSslCfgCertsDelete INTEGER
  slbNewSslCfgCertsGenerate INTEGER
  slbNewSslCfgCertsStatus INTEGER

SlbCurSslCfgGroupsEntry  
SEQUENCE    
  slbCurSslCfgGroupsID DisplayString
  slbCurSslCfgGroupsName DisplayString
  slbCurSslCfgGroupsType INTEGER
  slbCurSslCfgGroupsDefaultCert DisplayString
  slbCurSslCfgGroupsCertBmap OCTET STRING

SlbNewSslCfgGroupsEntry  
SEQUENCE    
  slbNewSslCfgGroupsID DisplayString
  slbNewSslCfgGroupsName DisplayString
  slbNewSslCfgGroupsType INTEGER
  slbNewSslCfgGroupsDelete INTEGER
  slbNewSslCfgGroupsDefaultCert DisplayString
  slbNewSslCfgGroupsAddCert DisplayString
  slbNewSslCfgGroupsRemCert DisplayString
  slbNewSslCfgGroupsCertBmap OCTET STRING

SlbCurCfgSmtportEntry  
SEQUENCE    
  slbCurCfgSmtportIndex Integer32
  slbCurCfgSmtportNum INTEGER

SlbNewCfgSmtportEntry  
SEQUENCE    
  slbNewCfgSmtportIndex Integer32
  slbNewCfgSmtportNum INTEGER
  slbNewCfgSmtportDelete INTEGER

SlbCurCfgWlmEntry  
SEQUENCE    
  slbCurCfgWlmIndex Integer32
  slbCurCfgWlmIpAddr IpAddress
  slbCurCfgWlmPort INTEGER
  slbCurCfgWlmGroups DisplayString
  slbCurCfgWlmState INTEGER

SlbNewCfgWlmEntry  
SEQUENCE    
  slbNewCfgWlmIndex Integer32
  slbNewCfgWlmIpAddr IpAddress
  slbNewCfgWlmPort INTEGER
  slbNewCfgWlmDelete INTEGER
  slbNewCfgWlmGroups DisplayString
  slbNewCfgWlmState INTEGER

SlbCurAcclCfgCachePolEntry  
SEQUENCE    
  slbCurAcclCfgCachePolNameIdIndex DisplayString
  slbCurAcclCfgCachePolName DisplayString
  slbCurAcclCfgCachePolExpireTime INTEGER
  slbCurAcclCfgCachePolMinSize INTEGER
  slbCurAcclCfgCachePolMaxSize INTEGER
  slbCurAcclCfgCachePolURLList DisplayString
  slbCurAcclCfgCachePolStore INTEGER
  slbCurAcclCfgCachePolServe INTEGER
  slbCurAcclCfgCachePolQuery INTEGER
  slbCurAcclCfgCachePolBrowser INTEGER
  slbCurAcclCfgCachePolAdminStatus INTEGER

SlbNewAcclCfgCachePolEntry  
SEQUENCE    
  slbNewAcclCfgCachePolNameIdIndex DisplayString
  slbNewAcclCfgCachePolName DisplayString
  slbNewAcclCfgCachePolExpireTime INTEGER
  slbNewAcclCfgCachePolMinSize INTEGER
  slbNewAcclCfgCachePolMaxSize INTEGER
  slbNewAcclCfgCachePolURLList DisplayString
  slbNewAcclCfgCachePolStore INTEGER
  slbNewAcclCfgCachePolServe INTEGER
  slbNewAcclCfgCachePolQuery INTEGER
  slbNewAcclCfgCachePolBrowser INTEGER
  slbNewAcclCfgCachePolAdminStatus INTEGER
  slbNewAcclCfgCachePolDelete INTEGER

SlbCurAcclCfgCacheUrlListEntry  
SEQUENCE    
  slbCurAcclCfgCacheUrlListIdIndex DisplayString
  slbCurAcclCfgCacheUrlListName DisplayString
  slbCurAcclCfgCacheUrlListAdminStatus INTEGER

SlbNewAcclCfgCacheUrlListEntry  
SEQUENCE    
  slbNewAcclCfgCacheUrlListIdIndex DisplayString
  slbNewAcclCfgCacheUrlListName DisplayString
  slbNewAcclCfgCacheUrlListAdminStatus INTEGER
  slbNewAcclCfgCacheUrlListDel INTEGER
  slbNewAcclCfgCacheUrlListCopy DisplayString

SlbCurAcclCfgCacheUrlRuleEntry  
SEQUENCE    
  slbCurAcclCfgCacheUrlRuleListIdIndex DisplayString
  slbCurAcclCfgCacheUrlRuleIndex INTEGER
  slbCurAcclCfgCacheUrlRuleName DisplayString
  slbCurAcclCfgCacheUrlRuleDomainM INTEGER
  slbCurAcclCfgCacheUrlRuleDomain DisplayString
  slbCurAcclCfgCacheUrlRuleURLm INTEGER
  slbCurAcclCfgCacheUrlRuleURL DisplayString
  slbCurAcclCfgCacheUrlRuleExpire INTEGER
  slbCurAcclCfgCacheUrlRuleCache INTEGER
  slbCurAcclCfgCacheUrlRuleAdminStatus INTEGER

SlbNewAcclCfgCacheUrlRuleEntry  
SEQUENCE    
  slbNewAcclCfgCacheUrlRuleListIdIndex DisplayString
  slbNewAcclCfgCacheUrlRuleIndex INTEGER
  slbNewAcclCfgCacheUrlRuleName DisplayString
  slbNewAcclCfgCacheUrlRuleDomainM INTEGER
  slbNewAcclCfgCacheUrlRuleDomain DisplayString
  slbNewAcclCfgCacheUrlRuleURLm INTEGER
  slbNewAcclCfgCacheUrlRuleURL DisplayString
  slbNewAcclCfgCacheUrlRuleExpire INTEGER
  slbNewAcclCfgCacheUrlRuleCache INTEGER
  slbNewAcclCfgCacheUrlRuleAdminStatus INTEGER
  slbNewAcclCfgCacheUrlRuleDelete INTEGER
  slbNewAcclCfgCacheUrlRuleCopy INTEGER

SlbCurAcclCfgCompPolEntry  
SEQUENCE    
  slbCurAcclCfgCompPolNameIdIndex DisplayString
  slbCurAcclCfgCompPolName DisplayString
  slbCurAcclCfgCompPolAlgrthm INTEGER
  slbCurAcclCfgCompPolComplv1 INTEGER
  slbCurAcclCfgCompPolMinSize INTEGER
  slbCurAcclCfgCompPolMaxSize INTEGER
  slbCurAcclCfgCompPolURLList DisplayString
  slbCurAcclCfgCompPolBrwsList DisplayString
  slbCurAcclCfgCompPolPreDefBrwsRuleList INTEGER
  slbCurAcclCfgCompPolCompsrv INTEGER
  slbCurAcclCfgCompPolAdminStatus INTEGER

SlbNewAcclCfgCompPolEntry  
SEQUENCE    
  slbNewAcclCfgCompPolNameIdIndex DisplayString
  slbNewAcclCfgCompPolName DisplayString
  slbNewAcclCfgCompPolAlgrthm INTEGER
  slbNewAcclCfgCompPolComplv1 INTEGER
  slbNewAcclCfgCompPolMinSize INTEGER
  slbNewAcclCfgCompPolMaxSize INTEGER
  slbNewAcclCfgCompPolURLList DisplayString
  slbNewAcclCfgCompPolBrwsList DisplayString
  slbNewAcclCfgCompPolPreDefBrwsRuleList INTEGER
  slbNewAcclCfgCompPolCompsrv INTEGER
  slbNewAcclCfgCompPolAdminStatus INTEGER
  slbNewAcclCfgCompPolDelete INTEGER

SlbCurAcclCfgCompUrlListEntry  
SEQUENCE    
  slbCurAcclCfgCompUrlListIdIndex DisplayString
  slbCurAcclCfgCompUrlListName DisplayString
  slbCurAcclCfgCompUrlListAdminStatus INTEGER

SlbNewAcclCfgCompUrlListEntry  
SEQUENCE    
  slbNewAcclCfgCompUrlListIdIndex DisplayString
  slbNewAcclCfgCompUrlListName DisplayString
  slbNewAcclCfgCompUrlListAdminStatus INTEGER
  slbNewAcclCfgCompUrlListDel INTEGER
  slbNewAcclCfgCompUrlListCopy DisplayString

SlbCurAcclCfgCompUrlRuleEntry  
SEQUENCE    
  slbCurAcclCfgCompUrlRuleListIdIndex DisplayString
  slbCurAcclCfgCompUrlRuleIndex INTEGER
  slbCurAcclCfgCompUrlRuleName DisplayString
  slbCurAcclCfgCompUrlRuleDomainM INTEGER
  slbCurAcclCfgCompUrlRuleDomain DisplayString
  slbCurAcclCfgCompUrlRuleURLm INTEGER
  slbCurAcclCfgCompUrlRuleURL DisplayString
  slbCurAcclCfgCompUrlRuleCompress INTEGER
  slbCurAcclCfgCompUrlRuleAdminStatus INTEGER

SlbNewAcclCfgCompUrlRuleEntry  
SEQUENCE    
  slbNewAcclCfgCompUrlRuleListIdIndex DisplayString
  slbNewAcclCfgCompUrlRuleIndex INTEGER
  slbNewAcclCfgCompUrlRuleName DisplayString
  slbNewAcclCfgCompUrlRuleDomainM INTEGER
  slbNewAcclCfgCompUrlRuleDomain DisplayString
  slbNewAcclCfgCompUrlRuleURLm INTEGER
  slbNewAcclCfgCompUrlRuleURL DisplayString
  slbNewAcclCfgCompUrlRuleCompress INTEGER
  slbNewAcclCfgCompUrlRuleAdminStatus INTEGER
  slbNewAcclCfgCompUrlRuleDelete INTEGER
  slbNewAcclCfgCompUrlRuleCopy DisplayString

SlbCurAcclCfgCompBrwsListEntry  
SEQUENCE    
  slbCurAcclCfgCompBrwsListIdIndex DisplayString
  slbCurAcclCfgCompBrwsListName DisplayString
  slbCurAcclCfgCompBrwsListAdminStatus INTEGER

SlbNewAcclCfgCompBrwsListEntry  
SEQUENCE    
  slbNewAcclCfgCompBrwsListIdIndex DisplayString
  slbNewAcclCfgCompBrwsListName DisplayString
  slbNewAcclCfgCompBrwsListAdminStatus INTEGER
  slbNewAcclCfgCompBrwsListDel INTEGER
  slbNewAcclCfgCompBrwsListCopy DisplayString

SlbCurAcclCfgCompBrwsRuleEntry  
SEQUENCE    
  slbCurAcclCfgCompBrwsRuleListIdIndex DisplayString
  slbCurAcclCfgCompBrwsRuleIndex INTEGER
  slbCurAcclCfgCompBrwsRuleName DisplayString
  slbCurAcclCfgCompBrwsRuleAgentM INTEGER
  slbCurAcclCfgCompBrwsRuleAgent DisplayString
  slbCurAcclCfgCompBrwsRuleContentM INTEGER
  slbCurAcclCfgCompBrwsRuleContent DisplayString
  slbCurAcclCfgCompBrwsRuleCompress INTEGER
  slbCurAcclCfgCompBrwsRuleAdminStatus INTEGER

SlbNewAcclCfgCompBrwsRuleEntry  
SEQUENCE    
  slbNewAcclCfgCompBrwsRuleListIdIndex DisplayString
  slbNewAcclCfgCompBrwsRuleIndex INTEGER
  slbNewAcclCfgCompBrwsRuleName DisplayString
  slbNewAcclCfgCompBrwsRuleAgentM INTEGER
  slbNewAcclCfgCompBrwsRuleAgent DisplayString
  slbNewAcclCfgCompBrwsRuleContentM INTEGER
  slbNewAcclCfgCompBrwsRuleContent DisplayString
  slbNewAcclCfgCompBrwsRuleCompress INTEGER
  slbNewAcclCfgCompBrwsRuleAdminStatus INTEGER
  slbNewAcclCfgCompBrwsRuleDelete INTEGER
  slbNewAcclCfgCompBrwsRuleCopy INTEGER

SlbCurNwclssCfgNetworkClassesEntry  
SEQUENCE    
  slbCurNwclssCfgNetworkClassesId DisplayString
  slbCurNwclssCfgNetworkClassesName DisplayString
  slbCurNwclssCfgNetworkClassesIpVer INTEGER

SlbNewNwclssCfgNetworkClassesEntry  
SEQUENCE    
  slbNewNwclssCfgNetworkClassesId DisplayString
  slbNewNwclssCfgNetworkClassesName DisplayString
  slbNewNwclssCfgNetworkClassesIpVer INTEGER
  slbNewNwclssCfgNetworkClassesDel INTEGER
  slbNewNwclssCfgNetworkClassesCopy DisplayString

SlbCurNwclssCfgNetworkElementsEntry  
SEQUENCE    
  slbCurNwclssCfgNetworkElementsNcId DisplayString
  slbCurNwclssCfgNetworkElementsId DisplayString
  slbCurNwclssCfgNetworkElementsNetType INTEGER
  slbCurNwclssCfgNetworkElementsIp IpAddress
  slbCurNwclssCfgNetworkElementsMask IpAddress
  slbCurNwclssCfgNetworkElementsFromIp IpAddress
  slbCurNwclssCfgNetworkElementsToIp IpAddress
  slbCurNwclssCfgNetworkElementsIpv6Addr DisplayString
  slbCurNwclssCfgNetworkElementsPrefixLen INTEGER
  slbCurNwclssCfgNetworkElementsFromIpv6Addr DisplayString
  slbCurNwclssCfgNetworkElementsToIpv6Addr DisplayString
  slbCurNwclssCfgNetworkElementsMatchType INTEGER

SlbNewNwclssCfgNetworkElementsEntry  
SEQUENCE    
  slbNewNwclssCfgNetworkElementsNcId DisplayString
  slbNewNwclssCfgNetworkElementsId DisplayString
  slbNewNwclssCfgNetworkElementsNetType INTEGER
  slbNewNwclssCfgNetworkElementsIp IpAddress
  slbNewNwclssCfgNetworkElementsMask IpAddress
  slbNewNwclssCfgNetworkElementsFromIp IpAddress
  slbNewNwclssCfgNetworkElementsToIp IpAddress
  slbNewNwclssCfgNetworkElementsIpv6Addr DisplayString
  slbNewNwclssCfgNetworkElementsPrefixLen INTEGER
  slbNewNwclssCfgNetworkElementsFromIpv6Addr DisplayString
  slbNewNwclssCfgNetworkElementsToIpv6Addr DisplayString
  slbNewNwclssCfgNetworkElementsMatchType INTEGER
  slbNewNwclssCfgNetworkElementsDel INTEGER

CachPerServStatEntry  
SEQUENCE    
  cachStatPerServVirtServIndex Integer32
  cachStatPerServVirtServiceIndex Integer32
  cachStatPerServVirtServPort Integer32
  cachStatPerServCachePolId DisplayString
  cachStatPerServTotObj Integer32
  cachStatPerServHitPerc Integer32
  cachStatPerServServRate Integer32
  cachStatPerServNewCachedObj Integer32
  cachStatPerServRateNewCachedObj Integer32
  cachStatPerServNewCachedBytes Integer32
  cachStatPerServRateNewCachedBytes Integer32
  cachStatPerServObjSmaller10K Integer32
  cachStatPerServObj11KTO50K Integer32
  cachStatPerServObj51KTO100K Integer32
  cachStatPerServObj101KTO1M Integer32
  cachStatPerServObjLarger1M Integer32

CachPerRuleListStatsEntry  
SEQUENCE    
  cachRuleListIndex Integer32
  cachRuleListId DisplayString
  cachRuleListNumOfObjCac Integer32
  cachRuleListNumOfBytesCac Integer32

CachPerRuleStatsEntry  
SEQUENCE    
  cachRuleRuleListIndex Integer32
  cachRuleIndex Integer32
  cachRuleRuleListId DisplayString
  cachRuleNumOfObjCac Integer32
  cachRuleNumOfBytesCac Integer32

CompStatPerServEntry  
SEQUENCE    
  compStatPerServVirtServIndex Integer32
  compStatPerServVirtServiceIndex Integer32
  compStatPerServVirtServPort Integer32
  compStatPerServCompPolId DisplayString
  compStatPerServUnComprTputKb Integer32
  compStatPerServComprTputKb Integer32
  compStatPerServAvgSizeBefComp Integer32
  compStatPerServAvgSizeAftComp Integer32
  compStatPerServAvgCompRatio Integer32
  compStatPerServThrputCompRatio Integer32

CompPerBrowRuleListStatsEntry  
SEQUENCE    
  compBrowRuleListIndex Integer32
  compBrowRuleListId DisplayString
  compBrowRuleListNumOfObj Integer32
  compBrowRuleListSizeBefComp Integer32
  compBrowRuleListSizeAftComp Integer32
  compBrowRuleListCompRatio Integer32

CompPerBrowRuleStatsEntry  
SEQUENCE    
  compBrowRuleRuleListIndex Integer32
  compBrowRuleIndex Integer32
  compBrowRuleRuleListId DisplayString
  compBrowRuleNumOfObj Integer32
  compBrowRuleSizeBefComp Integer32
  compBrowRuleSizeAftComp Integer32
  compBrowRuleCompRatio Integer32

CompPerUrlRuleListStatsEntry  
SEQUENCE    
  compUrlRuleListIndex Integer32
  compUrlRuleListId DisplayString
  compUrlRuleListNumOfObj Integer32
  compUrlRuleListSizeBefComp Integer32
  compUrlRuleListSizeAftComp Integer32
  compUrlRuleListCompRatio Integer32

CompPerUrlRuleStatsEntry  
SEQUENCE    
  compUrlRuleRuleListIndex Integer32
  compUrlRuleIndex Integer32
  compUrlRuleRuleListId DisplayString
  compUrlRuleNumOfObj Integer32
  compUrlRuleSizeBefComp Integer32
  compUrlRuleSizeAftComp Integer32
  compUrlRuleCompRatio Integer32

SslOffPerServStatsEntry  
SEQUENCE    
  sslOffPerServVirtServIndex Integer32
  sslOffPerServVirtServiceIndex Integer32
  sslOffPerServVirtServPort Integer32
  sslOffPerServSslPolId DisplayString
  sslOffPerServNewhandShake Integer32
  sslOffPerServReusedhandShake Integer32
  sslOffPerServPercReusedhandShake Integer32
  sslOffPerServSessUsingSSLv2 Integer32
  sslOffPerServSessUsingSSLv3 Integer32
  sslOffPerServSessUsingTLS Integer32
  sslOffPerServSessUsingTLS11 Integer32

HttpPerServStatsEntry  
SEQUENCE    
  httpPerServStatsVirtServIndex Integer32
  httpPerServStatsVirtServiceIndex Integer32
  httpPerServStatsVirtServPort Integer32
  httpPerServStatsCliUseKeepAlive Integer32
  httpPerServStatsHttp10VsHttp11Ratio Integer32
  httpPerServStatsHttpToHTTPSRedir Integer32
  httpPerServStatsAvgNumReqPerConn Integer32
  httpPerServStatsRespSmall1Kb Integer32
  httpPerServStatsResp1KbTo10Kb Integer32
  httpPerServStatsResp11KbTo50Kb Integer32
  httpPerServStatsResp51KbTo100Kb Integer32
  httpPerServStatsRespLarger100Kb Integer32
  httpPerServStatsReqCliToAas Integer32
  httpPerServStatsReqAasToSer Integer32
  httpPerServStatsRespSerToAas Integer32
  httpPerServStatsRespAasToCli Integer32
  httpPerServStatsTransRate Integer32

ConnmngPerServStatsEntry  
SEQUENCE    
  connmngPerServStatsVirtServIndex Integer32
  connmngPerServStatsVirtServiceIndex Integer32
  connmngPerServStatsVirtServPort Integer32
  connmngPerServStatsServConn Integer32
  connmngPerServStatsCliReq Integer32
  connmngPerServStatsMulRatio Integer32

SlbCurCfgSapAslrEntry  
SEQUENCE    
  slbCurCfgSapAslrIndex Integer32
  slbCurCfgSapAslrIpAddr IpAddress
  slbCurCfgSapAslrIpv6Addr DisplayString
  slbCurCfgSapAslrIpVer INTEGER
  slbCurCfgSapAslrPortNum INTEGER
  slbCurCfgSapAslrVipAddr IpAddress
  slbCurCfgSapAslrVipv6Addr DisplayString
  slbCurCfgSapAslrVipIpVer INTEGER
  slbCurCfgSapAslrInterval INTEGER
  slbCurCfgSapAslrState INTEGER
  slbCurCfgSapAslrName DisplayString
  slbCurCfgSapAslrLastAct DisplayString
  slbCurCfgSapAslrAutoConfig INTEGER
  slbCurCfgSapAslrSessionInfo INTEGER
  slbCurCfgSapAslrDelete INTEGER
  slbCurCfgSapAslrSignature DisplayString
  slbCurCfgSapAslrServCert DisplayString

SlbNewCfgSapAslrEntry  
SEQUENCE    
  slbNewCfgSapAslrIndex Integer32
  slbNewCfgSapAslrIpAddr IpAddress
  slbNewCfgSapAslrIpv6Addr DisplayString
  slbNewCfgSapAslrIpVer INTEGER
  slbNewCfgSapAslrPortNum INTEGER
  slbNewCfgSapAslrVipAddr IpAddress
  slbNewCfgSapAslrVipv6Addr DisplayString
  slbNewCfgSapAslrVipIpVer INTEGER
  slbNewCfgSapAslrInterval INTEGER
  slbNewCfgSapAslrState INTEGER
  slbNewCfgSapAslrName DisplayString
  slbNewCfgSapAslrLastAct DisplayString
  slbNewCfgSapAslrAutoConfig INTEGER
  slbNewCfgSapAslrSessionInfo INTEGER
  slbNewCfgSapAslrDelete INTEGER
  slbNewCfgSapAslrSignature DisplayString
  slbNewCfgSapAslrServCert DisplayString

SlbStatSapAslrEntry  
SEQUENCE    
  slbStatSapAslrIndex Integer32
  slbStatSapAslrSampling Counter32
  slbStatSapAslrFailure Counter32
  slbStatSapAslrDeviceUpdates Counter32
  slbStatSapAslrDeviceFailure Counter32
  slbStatSapAslrLastAct DisplayString

Defined Values

layer4 1.3.6.1.4.1.1872.2.5.4
The MIB module for the Alteon OS Layer 4 configuration, statistics and information .
MODULE-IDENTITY    

layer4Configs 1.3.6.1.4.1.1872.2.5.4.1
OBJECT IDENTIFIER    

layer4Stats 1.3.6.1.4.1.1872.2.5.4.2
OBJECT IDENTIFIER    

layer4Info 1.3.6.1.4.1.1872.2.5.4.3
OBJECT IDENTIFIER    

layer4Oper 1.3.6.1.4.1.1872.2.5.4.4
OBJECT IDENTIFIER    

slbCfg 1.3.6.1.4.1.1872.2.5.4.1.1
OBJECT IDENTIFIER    

filterCfg 1.3.6.1.4.1.1872.2.5.4.1.2
OBJECT IDENTIFIER    

gslbCfg 1.3.6.1.4.1.1872.2.5.4.1.3
OBJECT IDENTIFIER    

layer4TableSize 1.3.6.1.4.1.1872.2.5.4.1.4
OBJECT IDENTIFIER    

wlmCfg 1.3.6.1.4.1.1872.2.5.4.1.6
OBJECT IDENTIFIER    

slbGeneralCfg 1.3.6.1.4.1.1872.2.5.4.1.1.1
OBJECT IDENTIFIER    

realServerCfg 1.3.6.1.4.1.1872.2.5.4.1.1.2
OBJECT IDENTIFIER    

realServerGroupCfg 1.3.6.1.4.1.1872.2.5.4.1.1.3
OBJECT IDENTIFIER    

virtualServerCfg 1.3.6.1.4.1.1872.2.5.4.1.1.4
OBJECT IDENTIFIER    

portCfg 1.3.6.1.4.1.1872.2.5.4.1.1.5
OBJECT IDENTIFIER    

syncCfg 1.3.6.1.4.1.1872.2.5.4.1.1.6
OBJECT IDENTIFIER    

wapCfg 1.3.6.1.4.1.1872.2.5.4.1.1.7
OBJECT IDENTIFIER    

waphcCfg 1.3.6.1.4.1.1872.2.5.4.1.1.8
OBJECT IDENTIFIER    

synAttackDetCfg 1.3.6.1.4.1.1872.2.5.4.1.1.9
OBJECT IDENTIFIER    

hcsCfg 1.3.6.1.4.1.1872.2.5.4.1.1.13
OBJECT IDENTIFIER    

snmphcCfg 1.3.6.1.4.1.1872.2.5.4.1.1.14
OBJECT IDENTIFIER    

pipTblCfg 1.3.6.1.4.1.1872.2.5.4.1.1.15
OBJECT IDENTIFIER    

linklbCfg 1.3.6.1.4.1.1872.2.5.4.1.1.16
OBJECT IDENTIFIER    

smtportCfg 1.3.6.1.4.1.1872.2.5.4.1.1.17
OBJECT IDENTIFIER    

acclCfg 1.3.6.1.4.1.1872.2.5.4.1.1.18
OBJECT IDENTIFIER    

caching 1.3.6.1.4.1.1872.2.5.4.1.1.18.1
OBJECT IDENTIFIER    

compression 1.3.6.1.4.1.1872.2.5.4.1.1.18.2
OBJECT IDENTIFIER    

sslCfg 1.3.6.1.4.1.1872.2.5.4.1.1.19
OBJECT IDENTIFIER    

sslPol 1.3.6.1.4.1.1872.2.5.4.1.1.19.3
OBJECT IDENTIFIER    

authPol 1.3.6.1.4.1.1872.2.5.4.1.1.19.4
OBJECT IDENTIFIER    

certs 1.3.6.1.4.1.1872.2.5.4.1.1.19.5
OBJECT IDENTIFIER    

sapCfg 1.3.6.1.4.1.1872.2.5.4.1.1.20
OBJECT IDENTIFIER    

peerpipTblCfg 1.3.6.1.4.1.1872.2.5.4.1.1.21
OBJECT IDENTIFIER    

nwclssCfg 1.3.6.1.4.1.1872.2.5.4.1.1.22
OBJECT IDENTIFIER    

syncGeneralCfg 1.3.6.1.4.1.1872.2.5.4.1.1.6.1
OBJECT IDENTIFIER    

gslbGeneralCfg 1.3.6.1.4.1.1872.2.5.4.1.3.1
OBJECT IDENTIFIER    

gslbSitesCfg 1.3.6.1.4.1.1872.2.5.4.1.3.2
OBJECT IDENTIFIER    

gslbEnhNetworkCfg 1.3.6.1.4.1.1872.2.5.4.1.3.4
OBJECT IDENTIFIER    

gslbRuleCfg 1.3.6.1.4.1.1872.2.5.4.1.3.5
OBJECT IDENTIFIER    

gslbDnsSecCfg 1.3.6.1.4.1.1872.2.5.4.1.3.6
OBJECT IDENTIFIER    

gslbDnsResVipCfg 1.3.6.1.4.1.1872.2.5.4.1.3.7
OBJECT IDENTIFIER    

gslbDnsSecGlobalCfg 1.3.6.1.4.1.1872.2.5.4.1.3.6.1
OBJECT IDENTIFIER    

gslbDnsSecKeyCfg 1.3.6.1.4.1.1872.2.5.4.1.3.6.2
OBJECT IDENTIFIER    

gslbDnsSecZoneCfg 1.3.6.1.4.1.1872.2.5.4.1.3.6.3
OBJECT IDENTIFIER    

gslbDnsSecImportExport 1.3.6.1.4.1.1872.2.5.4.1.3.6.4
OBJECT IDENTIFIER    

slbSpStats 1.3.6.1.4.1.1872.2.5.4.2.1
OBJECT IDENTIFIER    

slbMaintStats 1.3.6.1.4.1.1872.2.5.4.2.5
OBJECT IDENTIFIER    

filterStats 1.3.6.1.4.1.1872.2.5.4.2.6
OBJECT IDENTIFIER    

gslbStats 1.3.6.1.4.1.1872.2.5.4.2.7
OBJECT IDENTIFIER    

wapStats 1.3.6.1.4.1.1872.2.5.4.2.8
OBJECT IDENTIFIER    

ftpStats 1.3.6.1.4.1.1872.2.5.4.2.10
OBJECT IDENTIFIER    

rtspStats 1.3.6.1.4.1.1872.2.5.4.2.11
OBJECT IDENTIFIER    

tcpLimitStats 1.3.6.1.4.1.1872.2.5.4.2.12
OBJECT IDENTIFIER    

dnsSlbStats 1.3.6.1.4.1.1872.2.5.4.2.13
OBJECT IDENTIFIER    

sslSlbStats 1.3.6.1.4.1.1872.2.5.4.2.16
OBJECT IDENTIFIER    

sipStats 1.3.6.1.4.1.1872.2.5.4.2.20
OBJECT IDENTIFIER    

sessMirrorStats 1.3.6.1.4.1.1872.2.5.4.2.22
OBJECT IDENTIFIER    

accelStats 1.3.6.1.4.1.1872.2.5.4.2.23
OBJECT IDENTIFIER    

cachStats 1.3.6.1.4.1.1872.2.5.4.2.23.1
OBJECT IDENTIFIER    

compStats 1.3.6.1.4.1.1872.2.5.4.2.23.2
OBJECT IDENTIFIER    

httpStats 1.3.6.1.4.1.1872.2.5.4.2.24
OBJECT IDENTIFIER    

connmngStats 1.3.6.1.4.1.1872.2.5.4.2.24.17
OBJECT IDENTIFIER    

sapStats 1.3.6.1.4.1.1872.2.5.4.2.25
OBJECT IDENTIFIER    

slbRealServerMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.2.1
The maximum number of entries in SLB RealServerTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgRealServerTable 1.3.6.1.4.1.1872.2.5.4.1.1.2.2
The table of Real Server configuration in the current_config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurCfgRealServerEntry

slbCurCfgRealServerEntry 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1
Information about a particular Real Server configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbCurCfgRealServerEntry  

slbCurCfgRealServerIndex 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.1
The real server number
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgRealServerIpAddr 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.2
IP address of the real server identified by the instance of the slbRealServerIndex.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slbCurCfgRealServerWeight 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.3
The server weight.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..48  

slbCurCfgRealServerMaxConns 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.4
The maximum number of connections that are allowed.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..200000  

slbCurCfgRealServerTimeOut 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.5
The maximum number of minutes an inactive connection remains open.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 2..32768  

slbCurCfgRealServerBackUp 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.6
The backup server number for this server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgRealServerPingInterval 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.7
The interval between keep-alive (ping) attempts in number of seconds. Zero means disabling ping attempt.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..60  

slbCurCfgRealServerFailRetry 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.8
The number of failed attempts to declare this server DOWN.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..63  

slbCurCfgRealServerSuccRetry 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.9
The number of successful attempts to declare a server UP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..63  

slbCurCfgRealServerState 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.10
Enable or disable the server and remove the existing sessions using disabled-with-fastage option.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3), disabled-with-fastage(4)  

slbCurCfgRealServerType 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.11
The server type. It participates in global server load balancing when it is configured as remote-server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER local-server(1), remote-server(2)  

slbCurCfgRealServerName 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.12
The name of the real server.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbCurCfgRealServerUrlBmap 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.13
The URL Pathes selected for URL load balancing for by the real server. The selected URL Pathes are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ URL Path 9 || || || ||___ URL Path 8 || |____ URL Path 7 || . . . ||_________ URL Path 2 |__________ URL Path 1 where x : 1 - The represented URL Path is selected 0 - The represented URL Path is not selected
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slbCurCfgRealServerCookie 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.14
The real server that will handle client requests that doesn't contain an URL cookie if Cookie loadbalance is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgRealServerExcludeStr 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.15
The real server will handle requests that don't match the loadbalance string if it is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgRealServerSubmac 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.16
The real server config to enable/disable MAC SA substitution for L4 traffic. If disabled (the default) we will NOT substitute the MAC SA of client-to-server frames. If enabled, we will substitute the MAC SA.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgRealServerProxy 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.17
The real server config to enable/disable client proxy operation.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgRealServerLdapwr 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.18
The real server config to enable/disable LDAP write server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgRealServerOid 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.19
The OID to be sent in the SNMP get request packet.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

slbCurCfgRealServerCommString 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.20
The community string to be used in the SNMP get request packet.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbCurCfgRealServerIdsvlan 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.21
The VLAN to be associated with the IDS server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..4090  

slbCurCfgRealServerIdsport 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.22
The port to be connected to the IDS server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgRealServerAvail 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.23
The remote real server Global SLB availability.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..48  

slbCurCfgRealServerFastHealthCheck 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.24
The real server config to enable/disable Fast Health Check Operation.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgRealServerSubdmac 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.25
The real server config to enable/disable MAC DA substitution for L4 traffic. If disabled, we will NOT substitute the MAC DA of client-to-server frames. If enabled(default), we will substitute the MAC DA.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgRealServerOverflow 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.26
The real server config to enable/disable Overflow. If enabled(default) allows Backup server to kick in if real server reaches maximum connections.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgRealServerBkpPreempt 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.27
The real server config to enable/disable backup preemption. If enabled (default)allows to preempt the backup server when the primary server comes up. If disabled the backup server will continue to serve the traffic even when primary server comes up.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgRealServerIpVer 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.28
The type of IP address.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2)  

slbCurCfgRealServerIpv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.2.2.1.29
IPV6 address of the real server identified by the instance of the slbRealServerIndex. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

slbNewCfgRealServerTable 1.3.6.1.4.1.1872.2.5.4.1.1.2.3
The table of Real Server configuration in the new_config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewCfgRealServerEntry

slbNewCfgRealServerEntry 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1
Information about a particular Real Server configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbNewCfgRealServerEntry  

slbNewCfgRealServerIndex 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.1
The real server number
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbNewCfgRealServerIpAddr 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.2
IP address of the real server identified by the instance of slbRealServerIndex.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

slbNewCfgRealServerWeight 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.3
The server weight.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..48  

slbNewCfgRealServerMaxConns 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.4
The maximum number of connections that are allowed.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..200000  

slbNewCfgRealServerTimeOut 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.5
The maximum number of minutes an inactive connection remains open.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 2..32768  

slbNewCfgRealServerBackUp 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.6
The backup server number for this server.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

slbNewCfgRealServerPingInterval 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.7
The interval between keep-alive (ping) attempts in number of seconds. Zero means disabling ping attempt.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..60  

slbNewCfgRealServerFailRetry 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.8
The number of failed attempts to declare this server DOWN.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..63  

slbNewCfgRealServerSuccRetry 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.9
The number of successful attempts to declare a server UP.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..63  

slbNewCfgRealServerState 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.10
Enable or disable the server and remove the existing sessions using disabled-with-fastage option.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3), disabled-with-fastage(4)  

slbNewCfgRealServerDelete 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.11
By setting the value to delete(2), the entire row is deleted.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbNewCfgRealServerType 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.12
The server type. It participates in global server load balancing when it is configured as remote-server.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER local-server(1), remote-server(2)  

slbNewCfgRealServerName 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.13
The name of the real server.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbNewCfgRealServerUrlBmap 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.14
The URL Pathes selected for URL load balancing for by the real server. The selected URL Pathes are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ URL Path 9 || || || ||___ URL Path 8 || |____ URL Path 7 || . . . ||_________ URL Path 2 |__________ URL Path 1 where x : 1 - The represented URL Path is selected 0 - The represented URL Path is not selected
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slbNewCfgRealServerAddUrl 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.15
The URL Path (slbCurCfgUrlLbPathIndex) to be added to the real server. A zero is returned when read.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

slbNewCfgRealServerRemUrl 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.16
The URL Path (slbCurCfgUrlLbPathIndex) to be removed from the real server. A zero is returned when read.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

slbNewCfgRealServerCookie 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.17
Enable or disable real server to handle client requests that don't contain a cookie if cookie loadbalance is enabled.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgRealServerExcludeStr 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.18
Enable or disable exclusionary matching string on real server.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgRealServerSubmac 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.19
The real server config to enable/disable MAC SA substitution for L4 traffic. If disabled (the default) we will NOT substitute the MAC SA of client-to-server frames. If enabled, we will substitute the MAC SA.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgRealServerProxy 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.20
The real server config to enable/disable client proxy operation.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgRealServerLdapwr 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.21
The real server config to enable/disable LDAP write server.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgRealServerOid 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.22
The OID to be sent in the SNMP get request packet.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..128)  

slbNewCfgRealServerCommString 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.23
The community string to be used in the SNMP get request packet.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbNewCfgRealServerIdsvlan 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.24
The VLAN to be associated with IDS server.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..4090  

slbNewCfgRealServerIdsport 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.25
The port to be connected to IDS server.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

slbNewCfgRealServerAvail 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.26
The remote real server Global SLB availability.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..48  

slbNewCfgRealServerFastHealthCheck 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.27
The real server config to enable/disable Fast Health Check Operation.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgRealServerSubdmac 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.28
The real server config to enable/disable MAC DA substitution for L4 traffic. If disabled, we will NOT substitute the MAC DA of client-to-server frames. If enabled(default), we will substitute the MAC DA.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgRealServerOverflow 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.29
The real server config to enable/disable Overflow. If enabled(default) allows Backup server to kick in if real server reaches maximum connections.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgRealServerBkpPreempt 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.30
The real server config to enable/disable backup preemption. If enabled (default)allows to preempt the backup server when the primary server comes up. If disabled the backup server will continue to serve the traffic even when primary server comes up.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgRealServerIpVer 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.31
The type of IP address.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2)  

slbNewCfgRealServerIpv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.32
IPV6 address of the real server identified by the instance of the slbRealServerIndex. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..40)  

slbNewCfgRealServerNxtRportIdx 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.33
The next available free slot index number, to add the real port to the server. Value 0 will be returned if no free slot available.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..64  

slbNewCfgRealServerNxtBuddyIdx 1.3.6.1.4.1.1872.2.5.4.1.1.2.3.1.34
The next available free slot Buddy index number, to add the Buddy Server to the Real server. Value 0 will be returned if no free slot available.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..4  

slbRealServPortTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.2.4
The maximum number of entries in SLB RealServPortTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgRealServPortTable 1.3.6.1.4.1.1872.2.5.4.1.1.2.5
The table of real server service ports.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurCfgRealServPortEntry

slbCurCfgRealServPortEntry 1.3.6.1.4.1.1872.2.5.4.1.1.2.5.1
A row in the real server service ports table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbCurCfgRealServPortEntry  

slbCurCfgRealServIndex 1.3.6.1.4.1.1872.2.5.4.1.1.2.5.1.1
The number of the real server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgRealServPortIndex 1.3.6.1.4.1.1872.2.5.4.1.1.2.5.1.2
The port index. This has no external meaning
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgRealServRealPort 1.3.6.1.4.1.1872.2.5.4.1.1.2.5.1.3
The layer4 real service port number.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 2..65534  

slbNewCfgRealServPortTable 1.3.6.1.4.1.1872.2.5.4.1.1.2.6
The table of real server service ports.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewCfgRealServPortEntry

slbNewCfgRealServPortEntry 1.3.6.1.4.1.1872.2.5.4.1.1.2.6.1
A row in the real server service ports table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbNewCfgRealServPortEntry  

slbNewCfgRealServIndex 1.3.6.1.4.1.1872.2.5.4.1.1.2.6.1.1
The number of the real server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbNewCfgRealServPortIndex 1.3.6.1.4.1.1872.2.5.4.1.1.2.6.1.2
The port index. This has no external meaning
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbNewCfgRealServRealPort 1.3.6.1.4.1.1872.2.5.4.1.1.2.6.1.3
The layer4 real service port number.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 2..65534  

slbNewCfgRealServPortDelete 1.3.6.1.4.1.1872.2.5.4.1.1.2.6.1.4
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbNewCfgRealServRealPortFreeIdx 1.3.6.1.4.1.1872.2.5.4.1.1.2.6.1.5
The first free port index number of the real server. Value 0 will be returned when all 64 ports are configured for a real server.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..64  

slbBuddyTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.2.7
The maximum number of entries in SLB real buddy server table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgBuddyTable 1.3.6.1.4.1.1872.2.5.4.1.1.2.8
The table of buddy information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurCfgBuddyEntry

slbCurCfgBuddyEntry 1.3.6.1.4.1.1872.2.5.4.1.1.2.8.1
A row in the buddy server table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbCurCfgBuddyEntry  

slbCurCfgRealSerIndex 1.3.6.1.4.1.1872.2.5.4.1.1.2.8.1.1
The number of the real server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgBuddyIndex 1.3.6.1.4.1.1872.2.5.4.1.1.2.8.1.2
The buddy index. This has no external meaning
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgBuddyRealIndex 1.3.6.1.4.1.1872.2.5.4.1.1.2.8.1.3
The buddy server's real server number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgBuddyGroupIndex 1.3.6.1.4.1.1872.2.5.4.1.1.2.8.1.4
The buddy server's real group number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgBuddyService 1.3.6.1.4.1.1872.2.5.4.1.1.2.8.1.5
The buddy server's service.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 9..65534  

slbNewCfgBuddyTable 1.3.6.1.4.1.1872.2.5.4.1.1.2.9
The table of buddy servers.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewCfgBuddyEntry

slbNewCfgBuddyEntry 1.3.6.1.4.1.1872.2.5.4.1.1.2.9.1
A row in the real server buddy table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbNewCfgBuddyEntry  

slbNewCfgRealSerIndex 1.3.6.1.4.1.1872.2.5.4.1.1.2.9.1.1
The number of the real server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbNewCfgBuddyIndex 1.3.6.1.4.1.1872.2.5.4.1.1.2.9.1.2
The buddy index. This has no external meaning
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbNewCfgBuddyRealIndex 1.3.6.1.4.1.1872.2.5.4.1.1.2.9.1.3
The buddy server's real server number.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

slbNewCfgBuddyGroupIndex 1.3.6.1.4.1.1872.2.5.4.1.1.2.9.1.4
The buddy server's real group number.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

slbNewCfgBuddyService 1.3.6.1.4.1.1872.2.5.4.1.1.2.9.1.5
The buddy server's service.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 9..65534  

slbNewCfgBuddyDelete 1.3.6.1.4.1.1872.2.5.4.1.1.2.9.1.6
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbGroupTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.3.1
The maximum number of entries in SLB group tables.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbGroupMaxIdsSize 1.3.6.1.4.1.1872.2.5.4.1.1.3.2
The maximum number of groups IDS can be enabled on.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgGroupTable 1.3.6.1.4.1.1872.2.5.4.1.1.3.3
The table of groups
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurCfgGroupEntry

slbCurCfgGroupEntry 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1
A row in the slbCurCfgGroupTable
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbCurCfgGroupEntry  

slbCurCfgGroupIndex 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.1
The group number for which the information pertains.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgGroupRealServers 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.2
The Real servers in the group. The servers are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | || |_ server 9 | || | ||___ server 8 | |____ server 7 | . . . |__________ server 1 where x : 1 - The represented server belongs to the group 0 - The represented server does not belong to the group
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slbCurCfgGroupMetric 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.3
The metric used to select next server in group.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER roundRobin(1), leastConnections(2), minMisses(3), hash(4), response(5), bandwidth(6), phash(7), svcLeast(8)  

slbCurCfgGroupBackupServer 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.4
The backup real server for this group.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgGroupBackupGroup 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.5
The backup real server group for this group.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgGroupHealthCheckUrl 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.6
The specific content which is examined during health checks. The content depends on the type of health check.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..127)  

slbCurCfgGroupHealthCheckLayer 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.7
The OSI layer at which servers are health checked.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER icmp(1), tcp(2), http(3), httphead(44), dns(4), smtp(5), pop3(6), nntp(7), ftp(8), imap(9), radius(10), sslh(11), script1(12), script2(13), script3(14), script4(15), script5(16), script6(17), script7(18), script8(19), script9(20), script10(21), script11(22), script12(23), script13(24), script14(25), script15(26), script16(27), link(28), wsp(29), wtls(30), ldap(31), udpdns(32), arp(33), snmp1(34), snmp2(35), snmp3(36), snmp4(37), snmp5(38), radiusacs(39), tftp(40), wtp(41), rtsp(42), sipping(43), sipoptions(45), wts(46), dhcp(47), radiusaa(48), sslv3(49), script17(116), script18(117), script19(118), script20(119), script21(120), script22(121), script23(122), script24(123), script25(124), script26(125), script27(126), script28(127), script29(128), script30(129), script31(130), script32(131), script33(132), script34(133), script35(134), script36(135), script37(136), script38(137), script39(138), script40(139), script41(140), script42(141), script43(142), script44(143), script45(144), script46(145), script47(146), script48(147), script49(148), script50(149), script51(150), script52(151), script53(152), script54(153), script55(154), script56(155), script57(156), script58(157), script59(158), script60(159), script61(160), script62(161), script63(162), script64(163)  

slbCurCfgGroupName 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.8
The name of the real server group.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbCurCfgGroupRealThreshold 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.9
The minimum number of real servers available. If at any time, the number reaches this minimum limit, a SYSLOG ALERT message is send to to the configured syslog servers stating that the real server threshold has been reached for the concerned group.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

slbCurCfgGroupVipHealthCheck 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.10
Enable or disable VIP health checking in DSR mode.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgGroupIdsState 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.11
Enable or disable intrusion detection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgGroupIdsPort 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.12
The intrusion detection port. A value of 1 is invalid.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65534  

slbCurCfgGroupIdsFlood 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.13
Enable or disable intrusion detection group flood.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgGroupMinmissHash 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.14
24|32 number of ip bits used for minmisses hash in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER minmiss-24(1), minmiss-32(2)  

slbCurCfgGroupPhashMask 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.15
IP address mask used by the persistent hash metric.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slbCurCfgGroupRmetric 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.16
The metric used to select next rport in server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER roundRobin(1), hash(2), leastConnections(3)  

slbCurCfgGroupHealthCheckFormula 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.17
The formula used to state the actual health of a virtual service. It allows user to use the symbols of '(', ')', '|', '&' to construct a formula to state the health of the server group. This string can take the following formats : '(1&2|3..)', '128' or 'none' Example: Consider a group with 4 reals 1, 2, 3, 4. An example of a formuala to mark the server group failed for the virtual server if 1 and 2 FAILED or 3 and 4 FAILED is (1|2)&(3|4) This formula will mark the virtual server UP, if 1 or 2 and 3 or 4 are health checked sucessfully.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbCurCfgGroupOperatorAccess 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.18
Enable or disable access to this group for operator.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgGroupWlm 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.19
The Workload Manager for this Group.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgGroupRadiusAuthenString 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.20
The group RADIUS authentication string. The string is used for generating encrypted authentication string while doing RADIUS health check for this group radius servers.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbCurCfgGroupSecBackupGroup 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.21
The Secondary backup real server group for this group.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgGroupSlowstart 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.22
The slow-start time for this group.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgGroupMinThreshold 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.23
The minimum threshold value for this group.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgGroupMaxThreshold 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.24
The maximum threshold value for this group.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgGroupIpVer 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.25
The type of real server group IP address.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2), mixed(3)  

slbCurCfgGroupBackup 1.3.6.1.4.1.1872.2.5.4.1.1.3.3.1.26
The backup real group or real server for this group.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

slbNewCfgGroupTable 1.3.6.1.4.1.1872.2.5.4.1.1.3.4
The table of groups
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewCfgGroupEntry

slbNewCfgGroupEntry 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1
A row in the slbNewCfgGroupTable
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbNewCfgGroupEntry  

slbNewCfgGroupIndex 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.1
The group number for which the information pertains.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbNewCfgGroupRealServers 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.2
The Real servers in the group. The servers are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | || |_ server 9 | || | ||___ server 8 | |____ server 7 | . . . |__________ server 1 where x : 1 - The represented server belongs to the group 0 - The represented server does not belong to the group
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slbNewCfgGroupAddServer 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.3
The real server to be added to the group. When read, 0 is returned.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

slbNewCfgGroupRemoveServer 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.4
The real server to be removed from the group. When read, 0 is returned.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

slbNewCfgGroupMetric 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.5
The metric used to select next server in group.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER roundRobin(1), leastConnections(2), minMisses(3), hash(4), response(5), bandwidth(6), phash(7), svcLeast(8)  

slbNewCfgGroupBackupServer 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.6
The backup real server for this group.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

slbNewCfgGroupBackupGroup 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.7
The backup real server group for this group.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

slbNewCfgGroupHealthCheckUrl 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.8
The specific content which is examined during health checks. The content depends on the type of health check.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..127)  

slbNewCfgGroupHealthCheckLayer 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.9
The OSI layer at which servers are health checked.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER icmp(1), tcp(2), http(3), httphead(44), dns(4), smtp(5), pop3(6), nntp(7), ftp(8), imap(9), radius(10), sslh(11), script1(12), script2(13), script3(14), script4(15), script5(16), script6(17), script7(18), script8(19), script9(20), script10(21), script11(22), script12(23), script13(24), script14(25), script15(26), script16(27), link(28), wsp(29), wtls(30), ldap(31), udpdns(32), arp(33), snmp1(34), snmp2(35), snmp3(36), snmp4(37), snmp5(38), radiusacs(39), tftp(40), wtp(41), rtsp(42), sipping(43), sipoptions(45), wts(46), dhcp(47), radiusaa(48), sslv3(49), script17(116), script18(117), script19(118), script20(119), script21(120), script22(121), script23(122), script24(123), script25(124), script26(125), script27(126), script28(127), script29(128), script30(129), script31(130), script32(131), script33(132), script34(133), script35(134), script36(135), script37(136), script38(137), script39(138), script40(139), script41(140), script42(141), script43(142), script44(143), script45(144), script46(145), script47(146), script48(147), script49(148), script50(149), script51(150), script52(151), script53(152), script54(153), script55(154), script56(155), script57(156), script58(157), script59(158), script60(159), script61(160), script62(161), script63(162), script64(163)  

slbNewCfgGroupName 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.10
The name of the real server group.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbNewCfgGroupRealThreshold 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.11
The minimum number of real servers available. If at any time, the number reaches this minimum limit, a SYSLOG ALERT message is send to to the configured syslog servers stating that the real server threshold has been reached for the concerned group.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..15  

slbNewCfgGroupVipHealthCheck 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.12
Enable or disable VIP health checking in DSR mode.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgGroupIdsState 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.13
Enable or disable intrusion detection.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgGroupIdsPort 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.14
The intrusion detection port. A value of 1 is invalid.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65534  

slbNewCfgGroupDelete 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.15
By setting the value to delete(2), the entire group is deleted.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbNewCfgGroupIdsFlood 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.16
Enable or disable intrusion detection group flood.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgGroupMinmissHash 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.17
24|32 number of sip bits used for minmisses hash in the new_configuration block.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER minmiss-24(1), minmiss-32(2)  

slbNewCfgGroupPhashMask 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.18
IP address mask used by the persistent hash metric.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

slbNewCfgGroupRmetric 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.19
The metric used to select next rport in server.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER roundRobin(1), hash(2), leastConnections(3)  

slbNewCfgGroupHealthCheckFormula 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.20
The formula used to state the actual health of a virtual service. It allows user to use the symbols of '(', ')', '|', '&' to construct a formula to state the health of the server group. This string can take the following formats : '(1&2|3..)', '128' or 'none' Example: Consider a group with 4 reals 1, 2, 3, 4. An example of a formuala to mark the server group failed for the virtual server if 1 and 2 FAILED or 3 and 4 FAILED is (1|2)&(3|4) This formula will mark the virtual server UP, if 1 or 2 and 3 or 4 are health checked sucessfully.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbNewCfgGroupOperatorAccess 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.21
Enable or disable access to this group for operator.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgGroupWlm 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.22
The Workload Manager for this Group.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

slbNewCfgGroupRadiusAuthenString 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.23
The group RADIUS authentication string. The string is used for generating encrypted authentication string while doing RADIUS health check for this group radius servers.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbNewCfgGroupSecBackupGroup 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.24
The Secondary backup real server group for this group.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

slbNewCfgGroupSlowstart 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.25
The slow-start time for this group.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

slbNewCfgGroupMinThreshold 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.26
The minimum threshold value for this group.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

slbNewCfgGroupMaxThreshold 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.27
The maximum threshold value for this group.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

slbNewCfgGroupIpVer 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.28
The type of real server group IP address.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2), mixed(3)  

slbNewCfgGroupBackup 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.29
The backup real group or real server for this group.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

slbNewCfgGroupBackupType 1.3.6.1.4.1.1872.2.5.4.1.1.3.4.1.30
Backup type of the real server group.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(1), server(2), group(3)  

slbCurCfgGroupRealServerTable 1.3.6.1.4.1.1872.2.5.4.1.1.3.5
The table of real servers per group.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurCfgGroupRealServerEntry

slbCurCfgGroupRealServerEntry 1.3.6.1.4.1.1872.2.5.4.1.1.3.5.1
A row in the Real server group table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbCurCfgGroupRealServerEntry  

slbCurCfgRealServGroupIndex 1.3.6.1.4.1.1872.2.5.4.1.1.3.5.1.1
The real server group index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgGroupRealServIndex 1.3.6.1.4.1.1872.2.5.4.1.1.3.5.1.2
The real server index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgGroupRealServerState 1.3.6.1.4.1.1872.2.5.4.1.1.3.5.1.3
Enable/disable a real server gracefully on a per group basis.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgGroupRealServerTable 1.3.6.1.4.1.1872.2.5.4.1.1.3.6
The table of real server per group.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewCfgGroupRealServerEntry

slbNewCfgGroupRealServerEntry 1.3.6.1.4.1.1872.2.5.4.1.1.3.6.1
A row in the Real server group table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbNewCfgGroupRealServerEntry  

slbNewCfgRealServGroupIndex 1.3.6.1.4.1.1872.2.5.4.1.1.3.6.1.1
The real server group index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbNewCfgGroupRealServIndex 1.3.6.1.4.1.1872.2.5.4.1.1.3.6.1.2
The real server index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbNewCfgGroupRealServerState 1.3.6.1.4.1.1872.2.5.4.1.1.3.6.1.3
Enable/disable a real server gracefully on a per group basis.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbVirtServerTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.4.1
The maximum number of entries in SLB VirtServerTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgVirtServerTable 1.3.6.1.4.1.1872.2.5.4.1.1.4.2
The table of virtual Servers.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurCfgVirtualServerEntry

slbCurCfgVirtualServerEntry 1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1
A row in the virtual server table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbCurCfgVirtualServerEntry  

slbCurCfgVirtServerIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.1
Virtual Server Number
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgVirtServerIpAddress 1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.2
IP address of the virtual server.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slbCurCfgVirtServerLayer3Only 1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.3
Enable or disable layer3 only balancing.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER layer3Only(1), disabled(2)  

slbCurCfgVirtServerState 1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.4
Enable or disable the virtual server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

slbCurCfgVirtServerDname 1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.5
The domain name of the virtual server.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

slbCurCfgVirtServerBwmContract 1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.6
The default BW contract of virtual server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgVirtServerWeight 1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.7
The virtual server Global SLB weight.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..48  

slbCurCfgVirtServerAvail 1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.8
The virtual server Global SLB availability.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..48  

slbCurCfgVirtServerRule 1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.9
The Global SLB rules for the domain. The rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | || |_ server 9 | || | ||___ server 8 | |____ server 7 | . . . |__________ server 1 where x : 1 - The represented rule belongs to the domain 0 - The represented rule does not belong to the domain
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slbCurCfgVirtServerVname 1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.10
The name of the virtual server.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbCurCfgVirtServerIpVer 1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.11
The type of IP address.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2)  

slbCurCfgVirtServerIpv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.12
The IPv6 address of the virtual server. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

slbCurCfgVirtServerCReset 1.3.6.1.4.1.1872.2.5.4.1.1.4.2.1.13
Enable/disable client connection reset for invalid VPORT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVirtServerTable 1.3.6.1.4.1.1872.2.5.4.1.1.4.3
The table of virtual Servers.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewCfgVirtualServerEntry

slbNewCfgVirtualServerEntry 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1
A row in the virtual server table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbNewCfgVirtualServerEntry  

slbNewCfgVirtServerIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.1
The Virtual Server Number
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbNewCfgVirtServerIpAddress 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.2
IP address of the virtual server.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

slbNewCfgVirtServerLayer3Only 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.3
Enable or disable layer3 only balancing.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER layer3Only(1), disabled(2)  

slbNewCfgVirtServerState 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.4
Enable or disable the virtual server.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

slbNewCfgVirtServerDname 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.6
The domain name of the virtual server.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

slbNewCfgVirtServerBwmContract 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.7
The default BW contract number of the virtual server.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

slbNewCfgVirtServerDelete 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.8
By setting the value to delete(2), the entire row is deleted.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbNewCfgVirtServerWeight 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.9
The virtual server Global SLB weight.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..48  

slbNewCfgVirtServerAvail 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.10
The virtual server Global SLB availability.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..48  

slbNewCfgVirtServerRule 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.11
The Global SLB rules for the domain. The rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | || |_ server 9 | || | ||___ server 8 | |____ server 7 | . . . |__________ server 1 where x : 1 - The represented rule belongs to the domain 0 - The represented rule does not belong to the domain
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slbNewCfgVirtServerAddRule 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.12
The rule to be added to the domain. When read, 0 is returned.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

slbNewCfgVirtServerRemoveRule 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.13
The rule to be removed from the domain. When read, 0 is returned.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

slbNewCfgVirtServerVname 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.14
The name of the virtual server.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbNewCfgVirtServerIpVer 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.15
The type of IP address.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2)  

slbNewCfgVirtServerIpv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.16
The IPv6 address of the virtual server. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..40)  

slbNewCfgVirtServerFreeServiceIdx 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.17
The first free service index number of the virtual server. Value 0 will be returned when all 8 virtual services are configured for a virtual server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..8  

slbNewCfgVirtServerCReset 1.3.6.1.4.1.1872.2.5.4.1.1.4.3.1.18
Enable/disable client connection reset for invalid VPORT.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbVirtServicesTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.4.4
The maximum number of entries in SLB Virtual Services Table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgVirtServicesTable 1.3.6.1.4.1.1872.2.5.4.1.1.4.5
The table of virtual services.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurCfgVirtServicesEntry

slbCurCfgVirtServicesEntry 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1
A row in the virtual services table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbCurCfgVirtServicesEntry  

slbCurCfgVirtServIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.1
The number of the virtual server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgVirtServiceIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.2
The service index. This has no external meaning
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgVirtServiceVirtPort 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.3
The layer4 virtual port number of the service.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 9..65534  

slbCurCfgVirtServiceRealGroup 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.4
The real server group number for this service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgVirtServiceRealPort 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.5
The layer4 real port number of the service.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65534  

slbCurCfgVirtServiceUDPBalance 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.6
Enable, disable or stateless the UDP balancing for the virtual port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3), stateless(4)  

slbCurCfgVirtServiceHname 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.7
The host name of the virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..34)  

slbCurCfgVirtServiceBwmContract 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.8
The BWM contract number for this service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgVirtServiceDirServerRtn 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.9
Enable or disable direct server return feature. To translate only MAC addresses in performing server load balancing when enabled. This allow servers to return directly to client since IP addresses have not been changed.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgVirtServiceRtspUrlParse 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.10
Select RTSP URL load balancing type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), l4hash(2), hash(3), patternMatch(4)  

slbCurCfgVirtServiceDBind 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.11
Enable/disable/forceproxy delayed binding.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), forceproxy(3)  

slbCurCfgVirtServiceFtpParsing 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.12
Enable or Disable the ftp parsing for the virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgVirtServiceRemapUDPFrags 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.13
Enable or disable remapping UDP server fragments
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgVirtServiceDnsSlb 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.14
Enable or disable DNS query load balancing.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgVirtServiceResponseCount 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.15
The number of cookie search response count.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

slbCurCfgVirtServicePBind 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.16
Enable or disable persistent bindings for the virtual port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER clientip(2), disabled(3), sslid(4), cookie(5)  

slbCurCfgVirtServiceCname 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.17
The cookie name of the virtual server used for cookie load balance.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

slbCurCfgVirtServiceCoffset 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.18
The starting byte offset of the cookie value.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

slbCurCfgVirtServiceClength 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.19
The number of bytes to extract from the cookie value.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

slbCurCfgVirtServiceUriCookie 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.20
Enable or disable cookie search in URI
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgVirtServiceCExpire 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.21
The cookie expire of the virtual server used for insert cookie load balance depending on the mode it has the following format absolute mode or for relative mode.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

slbCurCfgVirtServiceCookieMode 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.22
Select cookie persistence mode.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER rewrite(1), passive(2), insert(3), disabled(4)  

slbCurCfgVirtServiceHttpSlb 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.23
Select HTTP server loadbalancing for the virtual port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), urlslb(2), urlhash(3), cookie(4), host(5), browser(6), others(7), headerhash(8), version(9)  

slbCurCfgVirtServiceHttpSlbOption 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.24
Select HTTP server loadbalancing for the virtual port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER and(1), or(2), none(3)  

slbCurCfgVirtServiceHttpSlb2 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.25
Select HTTP server loadbalancing for the virtual port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), urlslb(2), urlhash(3), cookie(4), host(5), browser(6), others(7), headerhash(8), version(9)  

slbCurCfgVirtServiceHttpHdrName 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.26
The HTTP header name of the virtual server.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbCurCfgVirtServiceUrlHashLen 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.27
The number of bytes used to hash onto server, A zero means URL hashing disabled.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

slbCurCfgVirtServiceDirect 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.28
Enable or disable DAM for this service.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgVirtServiceThash 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.29
Set hash parameter.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER sip(1), sip-sport(2)  

slbCurCfgVirtServiceLdapreset 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.30
Enable or disable LDAP Server Reset
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgVirtServiceLdapslb 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.31
Enable or disable LDAP Server load balancing
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgVirtServiceSip 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.32
Enable/disable SIP load balancing.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgVirtServiceXForwardedFor 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.33
Enable/disable X-Forwarded-For for proxy mode.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgVirtServiceHttpRedir 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.34
Enable/disable HTTP/HTTPS redirect for GSLB.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgVirtServicePbindRport 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.35
Enable or disable use of rport in the session lookup for a persistent session.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgVirtServiceEgressPip 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.36
Enable/disable pip selection based on egress port/vlan.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgVirtServiceCookieDname 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.37
Select dname for insert cookie persistence mode.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgVirtServiceWts 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.38
Enable or disable WTS loadbalancing and persistence.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgVirtServiceUhash 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.39
Enable when there is no Session Directory server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgVirtServiceTimeOut 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.40
The maximum number of minutes an inactive connection remains open.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..32768  

slbCurCfgVirtServiceSessionMirror 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.42
Enable/disable session mirroring.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgVirtServiceSoftGrid 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.43
Enable/disable softgrid load balancing.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgVirtServiceSdpNat 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.41
Enable/disable SIP Media portal NAT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgVirtServiceConnPooling 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.44
Enable/disable connection pooling for HTTP traffic.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgVirtPersistentTimeOut 1.3.6.1.4.1.1872.2.5.4.1.1.4.5.1.45
The maximum number of minutes a persistent session should exist.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..32768  

slbCurCfgVirtServicesSecondPartTable 1.3.6.1.4.1.1872.2.5.4.1.1.4.12
The table of virtual Services.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurCfgVirtServicesSecondPartEntry

slbCurCfgVirtServicesSecondPartEntry 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1
A row in the virtual services table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbCurCfgVirtServicesSecondPartEntry  

slbCurCfgVirtServSecondPartIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.1
The number of the virtual server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgVirtServiceSecondPartIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.2
The service index. This has no external meaning
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgVirtServiceConnmgtStatus 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.3
Connection management configuration for HTTP traffic(Enable/disable/pooling) [Default: Disable].
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), pooling(1), muxenabled(2)  

slbCurCfgVirtServiceConnmgtTimeout 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.4
Connection management server side connection idle timeout in minutes [0-32768] [Default: 10].
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..32768  

slbCurCfgVirtServiceCachepol 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.5
Cache policy name associated with this virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbCurCfgVirtServiceComppol 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.6
Compression policy name associated with this virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbCurCfgVirtServiceSSLpol 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.7
SSL policy name associated with this virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbCurCfgVirtServiceServCert 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.8
Server Certificate name associated with this virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbCurCfgVirtServiceHttpmodList 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.9
HTTP Content Modifications Rule-list associated with this virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbCurCfgVirtServiceCloaksrv 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.10
Enable/disable server cloaking.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgVirtServErrcodeStatus 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.11
Enable/disable/clear error-code configuration.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), clear(3)  

slbCurCfgVirtServErrcodeMatch 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.12
Match error-code(s), e.g 203,204 .
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

slbCurCfgVirtServErrcodeHttpRedir 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.13
Use http redirection [yes/no] [Default: yes].
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

slbCurCfgVirtServErrcodeUrl 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.14
URL for redirection.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..240)  

slbCurCfgVirtServErrcode 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.15
Set error code [Default: 302].
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..3)  

slbCurCfgVirtServErrcodeNew 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.16
Enter Cur error code [Default: 302].
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..3)  

slbCurCfgVirtServErrcodeReason 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.17
Enter error reason.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

slbCurCfgVirtServUrlchangStatus 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.18
Enter enabled/disabled/clear [Default: clear].
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2), clear(3)  

slbCurCfgVirtServUrlchangHostType 1.3.6.1.4.1.1872.2.5.4.1.1.4.12.1.19
Enter hostname match type [sufx|prefx|eq|incl|any] [Default: any]
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER sufx(1), prefx(2), eq(3), incl(4), any(5)  

slbCurCfgVirtServicesThirdPartTable 1.3.6.1.4.1.1872.2.5.4.1.1.4.13
The table of virtual Services.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurCfgVirtServicesThirdPartEntry

slbCurCfgVirtServicesThirdPartEntry 1.3.6.1.4.1.1872.2.5.4.1.1.4.13.1
A row in the virtual services table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbCurCfgVirtServicesThirdPartEntry  

slbCurCfgVirtServThirdPartIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.13.1.1
The number of the virtual server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgVirtServiceThirdPartIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.13.1.2
The service index. This has no external meaning
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgVirtServUrlchangHostName 1.3.6.1.4.1.1872.2.5.4.1.1.4.13.1.3
Enter hostname to match.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..250)  

slbCurCfgVirtServUrlchangPathType 1.3.6.1.4.1.1872.2.5.4.1.1.4.13.1.4
Enter path match type [sufx|prefx|eq|incl|any].
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER sufx(1), prefx(2), eq(3), incl(4), any(5), none(6)  

slbCurCfgVirtServUrlchangPathMatch 1.3.6.1.4.1.1872.2.5.4.1.1.4.13.1.5
Enter path to match.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..250)  

slbCurCfgVirtServUrlchangPageName 1.3.6.1.4.1.1872.2.5.4.1.1.4.13.1.6
Enter page name to match or none.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

slbCurCfgVirtServUrlchangPageType 1.3.6.1.4.1.1872.2.5.4.1.1.4.13.1.7
Enter page type to match or none.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

slbCurCfgVirtServUrlchangActnType 1.3.6.1.4.1.1872.2.5.4.1.1.4.13.1.8
Enter path action type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER insert(1), replace(2), remove(3), none(4)  

slbCurCfgVirtServUrlchangPathInsrt 1.3.6.1.4.1.1872.2.5.4.1.1.4.13.1.9
Enter path to insert.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..250)  

slbCurCfgVirtServUrlchangInsrtPostn 1.3.6.1.4.1.1872.2.5.4.1.1.4.13.1.10
Insert the specified path before or after the matched section?
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER before(1), after(2)  

slbCurCfgVirtServicesFourthPartTable 1.3.6.1.4.1.1872.2.5.4.1.1.4.14
The table of virtual Services.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurCfgVirtServicesFourthPartEntry

slbCurCfgVirtServicesFourthPartEntry 1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1
A row in the virtual services table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbCurCfgVirtServicesFourthPartEntry  

slbCurCfgVirtServFourthPartIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1.1
The number of the virtual server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgVirtServiceFourthPartIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1.2
The service index. This has no external meaning
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgVirtServUrlchangNewPgName 1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1.3
Enter Cur page name or none.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

slbCurCfgVirtServUrlchangNewPgType 1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1.4
Enter Cur page type or none.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

slbCurCfgVirtServPathHideStatus 1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1.5
Enter enabled/disabled/clear [Default: clear].
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2), clear(3)  

slbCurCfgVirtServPathHideHostType 1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1.6
Enter hostname type [sufx|prefx|eq|incl|any] [Default: any].
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER sufx(1), prefx(2), eq(3), incl(4), any(5)  

slbCurCfgVirtServPathHideHostName 1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1.7
Enter hostname to match.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..250)  

slbCurCfgVirtServPathHidePathType 1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1.8
Enter path match type [sufx|prefx|eq|none].
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER sufx(1), prefx(2), eq(3), none(4)  

slbCurCfgVirtServPathHidePathName 1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1.9
Enter path to remove.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..250)  

slbCurCfgVirtServTextrepStatus 1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1.10
Enter enabled/disabled/clear [Default: clear].
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2), clear(3)  

slbCurCfgVirtServTextrepAction 1.3.6.1.4.1.1872.2.5.4.1.1.4.14.1.11
Enter action [replace|remove|none].
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), replace(1), remove(2)  

slbCurCfgVirtServicesFifthPartTable 1.3.6.1.4.1.1872.2.5.4.1.1.4.15
The table of virtual Services.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurCfgVirtServicesFifthPartEntry

slbCurCfgVirtServicesFifthPartEntry 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1
A row in the virtual services table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbCurCfgVirtServicesFifthPartEntry  

slbCurCfgVirtServFifthPartIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.1
The number of the virtual server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgVirtServiceFifthPartIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.2
The service index. This has no external meaning
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgVirtServTextrepMatchText 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.3
Enter text to be replaced.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

slbCurCfgVirtServTextrepReplacTxt 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.4
Enter Cur text/ text to remove.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

slbCurCfgVirtServApplicationType 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.5
Application Type for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER basic-slb(1), dns(2), ftp(3), ftp-data(4), ldap(5), http(6), https(7), ssl(8), rtsp(9), sip(10), wts(11), tftp(12)  

slbCurCfgVirtServiceName 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.6
The name of the virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbCurCfgVirtServiceAction 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.7
Action type of the service.If we set value as group(1) it will Load balance the traffic between the servers defined in the group field after performing all other services actions.when set to a value of redirect(2) for http/https services, an http/s redirection will be performed with the values set in the application redirection.If we set value as discard(3) it will drop the session.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER group(1), redirect(2), discard(3)  

slbCurCfgVirtServiceRedirect 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.8
application redirection location.We need to provide this value When action type is set to redirect(2).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

slbCurCfgVirtServiceServCertGrpMark 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.9
Group Mark for Server Certificate. If we set value as cert(0) It will denote that the server certificate (name) associated with this virtual service, represents a certificate. Otherwise, a value of group(1), denotes that the server certificate (name) represents a group.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER cert(1), group(2)  

slbCurCfgVirtServiceDnsType 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.10
Set DNS type for this service (DNS, DNSSEC).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER dns(1), dnssec(2), both(3)  

slbCurCfgVirtServiceClntproxType 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.11
Set client proximity type for this service.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), http(2), https(3)  

slbCurCfgVirtServiceZerowinSize 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.12
Enable or disable zero window size in SYN+ACK for this service.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgVirtServiceCookiePath 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.13
The cookie path name of the virtual server used for cookie load balance.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbCurCfgVirtServiceCookieSecure 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.14
Is cookie secure [yes/no] [Default: no].
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

slbCurCfgVirtServiceNoRtsp 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.15
Enable or disable only rtsp SLB for this service.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgVirtServiceCkRebind 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.16
Server rebalancing when cookie is absent. When enabled, server load balancing will happen for subsequent request comes without cookie.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgVirtServiceParseLimit 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.17
Enable or disable buffer limit for content based selection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgVirtServiceParseLength 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.18
The buffer length for content based selection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..18200  

slbCurCfgVirtServiceUriNorm 1.3.6.1.4.1.1872.2.5.4.1.1.4.15.1.19
Enable or disable URI normalization for HTTP content matching.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVirtServicesTable 1.3.6.1.4.1.1872.2.5.4.1.1.4.6
The table of virtual Services.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewCfgVirtServicesEntry

slbNewCfgVirtServicesEntry 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1
A row in the virtual services table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbNewCfgVirtServicesEntry  

slbNewCfgVirtServIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.1
The number of the virtual server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbNewCfgVirtServiceIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.2
The service index. This has no external meaning
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..8  

slbNewCfgVirtServiceVirtPort 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.3
The layer4 virtual port number of the service.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 9..65534  

slbNewCfgVirtServiceRealGroup 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.4
The real server group number for this service.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

slbNewCfgVirtServiceRealPort 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.5
The layer4 real port number of the service.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65534  

slbNewCfgVirtServiceUDPBalance 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.6
Enable, disable or stateless the UDP balancing for the virtual port.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3), stateless(4)  

slbNewCfgVirtServiceHname 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.7
The host name of the virtual service.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..34)  

slbNewCfgVirtServiceBwmContract 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.8
The BWM contract number for this service.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

slbNewCfgVirtServiceDirServerRtn 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.9
Enable or disable direct server return feature. To translate only MAC addresses in performing server load balancing when enabled. This allow servers to return directly to client since IP addresses have not been changed.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVirtServiceRtspUrlParse 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.10
Select RTSP URL load balancing type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(1), l4hash(2), hash(3), patternMatch(4)  

slbNewCfgVirtServiceDBind 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.11
Enable/disable/forceproxy delayed binding.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), forceproxy(3)  

slbNewCfgVirtServiceFtpParsing 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.12
Enable or Disable the ftp parsing for the virtual service.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVirtServiceRemapUDPFrags 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.13
Enable or disable remapping UDP server fragments
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVirtServiceDnsSlb 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.14
Enable or disable DNS query load balancing.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVirtServiceResponseCount 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.15
The number of cookie search response count.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..16  

slbNewCfgVirtServicePBind 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.16
Enable or disable persistent bindings for the virtual port.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER clientip(2), disabled(3), sslid(4), cookie(5)  

slbNewCfgVirtServiceCname 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.17
The cookie name of the virtual server used for cookie load balance.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..20)  

slbNewCfgVirtServiceCoffset 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.18
The starting byte offset of the cookie value.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..64  

slbNewCfgVirtServiceClength 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.19
The number of bytes to extract from the cookie value.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..64  

slbNewCfgVirtServiceUriCookie 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.20
Enable or disable cookie search in URI
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVirtServiceCExpire 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.21
The cookie expire of the virtual server used for insert cookie load balance depending on the mode it has the following format absolute mode or for relative mode.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..20)  

slbNewCfgVirtServiceCookieMode 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.22
Select cookie persistence mode.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER rewrite(1), passive(2), insert(3)  

slbNewCfgVirtServiceHttpSlb 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.23
Select HTTP server loadbalancing for the virtual port.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disabled(1), urlslb(2), urlhash(3), cookie(4), host(5), browser(6), others(7), headerhash(8), version(9)  

slbNewCfgVirtServiceHttpSlbOption 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.24
Select HTTP server loadbalancing for the virtual port.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER and(1), or(2), none(3)  

slbNewCfgVirtServiceHttpSlb2 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.25
Select HTTP server loadbalancing for the virtual port.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disabled(1), urlslb(2), urlhash(3), cookie(4), host(5), browser(6), others(7), headerhash(8), version(9)  

slbNewCfgVirtServiceHttpHdrName 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.26
The HTTP header name of the virtual server.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbNewCfgVirtServiceUrlHashLen 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.27
The number of bytes used to hash onto server, A zero means URL hashing disabled.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

slbNewCfgVirtServiceDelete 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.28
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbNewCfgVirtServiceDirect 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.29
Enable or disable DAM for this service.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVirtServiceThash 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.30
Set hash parameter.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER sip(1), sip-sport(2)  

slbNewCfgVirtServiceLdapreset 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.31
Enable or disable LDAP Server Reset
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVirtServiceLdapslb 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.32
Enable or disable LDAP Server load balancing
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVirtServiceSip 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.33
Enable/disable SIP load balancing.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVirtServiceXForwardedFor 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.34
Enable/disable X-Forwarded-For for proxy mode.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVirtServiceHttpRedir 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.35
Enable/disable HTTP/HTTPS redirect for GSLB.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVirtServicePbindRport 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.36
Enable or disable use of rport in the session lookup for a persistent session.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVirtServiceEgressPip 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.37
Enable/disable pip selection based on egress port/vlan.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVirtServiceCookieDname 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.38
Select dname for insert cookie persistence mode.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVirtServiceWts 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.39
Enable or disable WTS loadbalancing and persistence.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVirtServiceUhash 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.40
Enable when there is no Session Directory server.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVirtServiceTimeOut 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.41
The maximum number of minutes an inactive connection remains open.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..32768  

slbNewCfgVirtServiceSessionMirror 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.43
Enable/disable session mirroring.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVirtServiceSoftGrid 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.44
Enable/disable softgrid load balancing.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVirtServiceSdpNat 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.42
Enable/disable SIP Media portal NAT.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVirtServiceConnPooling 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.45
Enable/disable connection pooling for HTTP traffic.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVirtPersistentTimeOut 1.3.6.1.4.1.1872.2.5.4.1.1.4.6.1.46
The maximum number of minutes a persistent session should exist.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..32768  

slbNewCfgVirtServicesSecondPartTable 1.3.6.1.4.1.1872.2.5.4.1.1.4.16
The table of virtual Services.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewCfgVirtServicesSecondPartEntry

slbNewCfgVirtServicesSecondPartEntry 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1
A row in the virtual services table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbNewCfgVirtServicesSecondPartEntry  

slbNewCfgVirtServSecondPartIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.1
The number of the virtual server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbNewCfgVirtServiceSecondPartIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.2
The service index. This has no external meaning
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbNewCfgVirtServiceConnmgtStatus 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.3
Connection management configuration for HTTP traffic(Enable/disable/pooling) [Default: Disable].
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disabled(0), pooling(1), muxenabled(2)  

slbNewCfgVirtServiceConnmgtTimeout 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.4
Connection management server side connection idle timeout in minutes [0-32768] [Default: 10].
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..32768  

slbNewCfgVirtServiceCachepol 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.5
Cache policy name associated with this virtual service.Set none to delete entry
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbNewCfgVirtServiceComppol 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.6
Compression policy name associated with this virtual service.Set none to delete entry
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbNewCfgVirtServiceSSLpol 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.7
SSL policy name associated with this virtual service.Set none to delete entry
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbNewCfgVirtServiceServCert 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.8
Server Certificate name associated with this virtual service.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbNewCfgVirtServiceHttpmodList 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.9
HTTP Content Modifications Rule-list associated with this virtual service.Set none to delete entry
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbNewCfgVirtServiceCloaksrv 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.10
Enable/disable server cloaking.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVirtServErrcodeStatus 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.11
Enable/disable/clear error-code configuration.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), clear(3)  

slbNewCfgVirtServErrcodeMatch 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.12
Match error-code(s), e.g 203,204 .
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

slbNewCfgVirtServErrcodeHttpRedir 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.13
Use http redirection [yes/no] [Default: yes].
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

slbNewCfgVirtServErrcodeUrl 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.14
URL for redirection.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..240)  

slbNewCfgVirtServErrcode 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.15
set error code [Default: 302].
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..3)  

slbNewCfgVirtServErrcodeNew 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.16
Enter new error code [Default: 302].
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..3)  

slbNewCfgVirtServErrcodeReason 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.17
Enter error reason.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..128)  

slbNewCfgVirtServUrlchangStatus 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.18
Enter enabled/disabled/clear [Default: clear].
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2), clear(3)  

slbNewCfgVirtServUrlchangHostType 1.3.6.1.4.1.1872.2.5.4.1.1.4.16.1.19
Enter hostname match type [sufx|prefx|eq|incl|any] [Default: any]
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER sufx(1), prefx(2), eq(3), incl(4), any(5)  

slbNewCfgVirtServicesThirdPartTable 1.3.6.1.4.1.1872.2.5.4.1.1.4.17
The table of virtual Services.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewCfgVirtServicesThirdPartEntry

slbNewCfgVirtServicesThirdPartEntry 1.3.6.1.4.1.1872.2.5.4.1.1.4.17.1
A row in the virtual services table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbNewCfgVirtServicesThirdPartEntry  

slbNewCfgVirtServThirdPartIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.17.1.1
The number of the virtual server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbNewCfgVirtServiceThirdPartIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.17.1.2
The service index. This has no external meaning
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbNewCfgVirtServUrlchangHostName 1.3.6.1.4.1.1872.2.5.4.1.1.4.17.1.3
Enter hostname to match.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..250)  

slbNewCfgVirtServUrlchangPathType 1.3.6.1.4.1.1872.2.5.4.1.1.4.17.1.4
Enter path match type [sufx|prefx|eq|incl|any|none].
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER sufx(1), prefx(2), eq(3), incl(4), any(5), none(6)  

slbNewCfgVirtServUrlchangPathMatch 1.3.6.1.4.1.1872.2.5.4.1.1.4.17.1.5
Enter path to match.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..250)  

slbNewCfgVirtServUrlchangPageName 1.3.6.1.4.1.1872.2.5.4.1.1.4.17.1.6
Enter page name to match or none.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

slbNewCfgVirtServUrlchangPageType 1.3.6.1.4.1.1872.2.5.4.1.1.4.17.1.7
Enter page type to match or none.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

slbNewCfgVirtServUrlchangActnType 1.3.6.1.4.1.1872.2.5.4.1.1.4.17.1.8
Enter path action type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER insert(1), replace(2), remove(3), none(4)  

slbNewCfgVirtServUrlchangPathInsrt 1.3.6.1.4.1.1872.2.5.4.1.1.4.17.1.9
Enter path to insert.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..250)  

slbNewCfgVirtServUrlchangInsrtPostn 1.3.6.1.4.1.1872.2.5.4.1.1.4.17.1.10
Insert the specified path before or after the matched section?
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER before(1), after(2)  

slbNewCfgVirtServicesFourthPartTable 1.3.6.1.4.1.1872.2.5.4.1.1.4.18
The table of virtual Services.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewCfgVirtServicesFourthPartEntry

slbNewCfgVirtServicesFourthPartEntry 1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1
A row in the virtual services table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbNewCfgVirtServicesFourthPartEntry  

slbNewCfgVirtServFourthPartIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1.1
The number of the virtual server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbNewCfgVirtServiceFourthPartIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1.2
The service index. This has no external meaning
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbNewCfgVirtServUrlchangNewPgName 1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1.3
Enter new page name or none.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

slbNewCfgVirtServUrlchangNewPgType 1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1.4
Enter new page type or none.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

slbNewCfgVirtServPathHideStatus 1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1.5
Enter enabled/disabled/clear [Default: clear].
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2), clear(3)  

slbNewCfgVirtServPathHideHostType 1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1.6
Enter hostname type [sufx|prefx|eq|incl|any] [Default: any].
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER sufx(1), prefx(2), eq(3), incl(4), any(5)  

slbNewCfgVirtServPathHideHostName 1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1.7
Enter hostname to match.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..250)  

slbNewCfgVirtServPathHidePathType 1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1.8
Enter path match type [sufx|prefx|eq|none].
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER sufx(1), prefx(2), eq(3), none(4)  

slbNewCfgVirtServPathHidePathName 1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1.9
Enter path to remove.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..250)  

slbNewCfgVirtServTextrepStatus 1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1.10
Enter enabled/disabled/clear [Default: clear].
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2), clear(3)  

slbNewCfgVirtServTextrepAction 1.3.6.1.4.1.1872.2.5.4.1.1.4.18.1.11
Enter action [replace|remove|none].
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), replace(1), remove(2)  

slbNewCfgVirtServicesFifthPartTable 1.3.6.1.4.1.1872.2.5.4.1.1.4.19
The table of virtual Services.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewCfgVirtServicesFifthPartEntry

slbNewCfgVirtServicesFifthPartEntry 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1
A row in the virtual services table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbNewCfgVirtServicesFifthPartEntry  

slbNewCfgVirtServFifthPartIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.1
The number of the virtual server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbNewCfgVirtServiceFifthPartIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.2
The service index. This has no external meaning
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbNewCfgVirtServTextrepMatchText 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.3
Enter text to be replaced.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..128)  

slbNewCfgVirtServTextrepReplacTxt 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.4
Enter new text/ text to remove.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..128)  

slbNewCfgVirtServApplicationType 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.5
Application Type for virtual service.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER basic-slb(1), dns(2), ftp(3), ftp-data(4), ldap(5), http(6), https(7), ssl(8), rtsp(9), sip(10), wts(11), tftp(12)  

slbNewCfgVirtServiceName 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.6
The name of the virtual service.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbNewCfgVirtServiceAction 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.7
Action type of the service.If we set value as group(1) it will Load balance the traffic between the servers defined in the group field after performing all other services actions.when set to a value of redirect(2) for http/https services, an http/s redirection will be performed with the values set in the application redirection.If we set value as discard(3) it will drop the session.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER group(1), redirect(2), discard(3)  

slbNewCfgVirtServiceRedirect 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.8
application redirection location.We need to provide this value When action type is set to redirect(2).
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..255)  

slbNewCfgVirtServiceServCertGrpMark 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.9
Group Mark for Server Certificate. If we set value as cert(0) It will denote that the server certificate (name) associated with this virtual service, represents a certificate. Otherwise, a value of group(1), denotes that the server certificate (name) represents a group.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER cert(1), group(2)  

slbNewCfgVirtServiceDnsType 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.10
Set DNS type for this service (DNS, DNSSEC).
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER dns(1), dnssec(2), both(3)  

slbNewCfgVirtServiceClntproxType 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.11
Set client proximity type for this service.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(1), http(2), https(3)  

slbNewCfgVirtServiceZerowinSize 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.12
Enable or disable zero window size in SYN+ACK for this service.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVirtServiceCookiePath 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.13
The cookie path name of the virtual server used for cookie load balance.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbNewCfgVirtServiceCookieSecure 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.14
Is cookie secure [yes/no] [Default: no].
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

slbNewCfgVirtServiceNoRtsp 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.15
Enable or disable only rtsp SLB for this service.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVirtServiceCkRebind 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.16
Enable or disable server rebalancing when cookie is absent. When enabled, server load balancing will happen for subsequent request comes without cookie.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVirtServiceParseLimit 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.17
Enable or disable buffer limit for content based selection.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVirtServiceParseLength 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.18
The buffer length for content based selection.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..18200  

slbNewCfgVirtServiceUriNorm 1.3.6.1.4.1.1872.2.5.4.1.1.4.19.1.19
Enable or disable URI normalization for HTTP content matching.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbUrlBwmTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.4.7
The maximum number of entries in SLB URL BWM Table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgUrlBwmTable 1.3.6.1.4.1.1872.2.5.4.1.1.4.8
The table of URL based BWM for Virtual Services.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurCfgUrlBwmEntry

slbCurCfgUrlBwmEntry 1.3.6.1.4.1.1872.2.5.4.1.1.4.8.1
A row in the URL based BWM virtual services table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbCurCfgUrlBwmEntry  

slbCurCfgUrlBwmVirtServIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.8.1.1
The number of the virtual server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgUrlBwmVirtServiceIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.8.1.2
The service index. This has no external meaning
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgUrlBwmUrlId 1.3.6.1.4.1.1872.2.5.4.1.1.4.8.1.3
The URL Path Identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgUrlBwmContract 1.3.6.1.4.1.1872.2.5.4.1.1.4.8.1.4
The BW contract number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbNewCfgUrlBwmTable 1.3.6.1.4.1.1872.2.5.4.1.1.4.9
The table of URL based BWM for Virtual Services.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewCfgUrlBwmEntry

slbNewCfgUrlBwmEntry 1.3.6.1.4.1.1872.2.5.4.1.1.4.9.1
A row in the URL based BWM virtual services table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbNewCfgUrlBwmEntry  

slbNewCfgUrlBwmVirtServIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.9.1.1
The number of the virtual server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbNewCfgUrlBwmVirtServiceIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.9.1.2
The service index. This has no external meaning
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbNewCfgUrlBwmUrlId 1.3.6.1.4.1.1872.2.5.4.1.1.4.9.1.3
The URL Path Identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbNewCfgUrlBwmContract 1.3.6.1.4.1.1872.2.5.4.1.1.4.9.1.4
The BW contract number.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

slbNewCfgUrlBwmDelete 1.3.6.1.4.1.1872.2.5.4.1.1.4.9.1.5
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbCurCfgContRuleTable 1.3.6.1.4.1.1872.2.5.4.1.1.4.10
The table of Content based Services Rules.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurCfgContRuleEntry

slbCurCfgContRuleEntry 1.3.6.1.4.1.1872.2.5.4.1.1.4.10.1
A row in the Content Based Services Rules table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbCurCfgContRuleEntry  

slbCurCfgContVirtServIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.10.1.1
The number of the virtual server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgContVirtServiceIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.10.1.2
The service index. This has no external meaning
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgContRuleIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.10.1.3
The content based service rule index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgContRuleName 1.3.6.1.4.1.1872.2.5.4.1.1.4.10.1.4
The Content Rule Name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbCurCfgContRuleContClass 1.3.6.1.4.1.1872.2.5.4.1.1.4.10.1.5
The Content Class for the rule.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbCurCfgContRuleAction 1.3.6.1.4.1.1872.2.5.4.1.1.4.10.1.6
Action type of the rule.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER group(1), appredir(2), discard(3), goto(4)  

slbCurCfgContRuleRealGrpNum 1.3.6.1.4.1.1872.2.5.4.1.1.4.10.1.7
The group number of real server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..1024  

slbCurCfgContRuleGotoRuleNum 1.3.6.1.4.1.1872.2.5.4.1.1.4.10.1.8
The group number of real server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..12800  

slbCurCfgContRuleRedirection 1.3.6.1.4.1.1872.2.5.4.1.1.4.10.1.9
Application redirection for the rule.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

slbCurCfgContRuleState 1.3.6.1.4.1.1872.2.5.4.1.1.4.10.1.10
Enable or disable Content Based Services Rule .
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgContRuleTable 1.3.6.1.4.1.1872.2.5.4.1.1.4.11
The table of Content based Services Rules.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewCfgContRuleEntry

slbNewCfgContRuleEntry 1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1
A row in the Content Based Services Rules table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbNewCfgContRuleEntry  

slbNewCfgContVirtServIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.1
The number of the virtual server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbNewCfgContVirtServiceIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.2
The service index. This has no external meaning
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbNewCfgContRuleIndex 1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.3
The content based service index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbNewCfgContRuleName 1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.4
The Content Rule Name.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbNewCfgContRuleContClass 1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.5
The Content Class for the rule.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbNewCfgContRuleAction 1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.6
Action type of the rule.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER group(1), appredir(2), discard(3), goto(4)  

slbNewCfgContRuleRealGrpNum 1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.7
The group number of real server.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..1024  

slbNewCfgContRuleGotoRuleNum 1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.8
The group number of real server.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..12800  

slbNewCfgContRuleRedirection 1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.9
Application redirection for the rule.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..255)  

slbNewCfgContRuleCopy 1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.10
The Number to which current rule is to be copied.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..12800  

slbNewCfgContRuleState 1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.11
Enable or disable Content Based Services Rule .
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgContRuleDelete 1.3.6.1.4.1.1872.2.5.4.1.1.4.11.1.12
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbPortTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.5.1
The maximum number of entries in SLB Port Table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgPortTable 1.3.6.1.4.1.1872.2.5.4.1.1.5.2
The table of ports and their SLB states
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurCfgPortEntry

slbCurCfgPortEntry 1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1
A row in the slbPortTable
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbCurCfgPortEntry  

slbCurCfgPortIndex 1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.1
The port number for which the SLB information pertains.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgPortSlbState 1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.2
The SLB state of the port. none(1) - not SLB port client(2) - SLB client port server(3) - SLB server port client-server(4) - SLB client and server port
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), client(2), server(3), client-server(4)  

slbCurCfgPortSlbFilter 1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.9
Enable or disable Filtering.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgPortSlbHotStandby 1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.3
Enable or disable hot standby processing on the switch port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgPortSlbInterSwitch 1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.4
Enable or disable inter-switch processing on the switch port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgPortSlbPipState 1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.5
Enable or disable use of proxy IP address on the switch port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgPortSlbRtsState 1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.6
Enable or disable RTS processing on the switch port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgPortSlbIdslbState 1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.7
Enable or disable Intrusion Detection server load balancing.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgPortSlbServState 1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.10
Enable or disable server processing.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgPortSlbClntState 1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.11
Enable or disable client processing.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgPortSlbL3Filter 1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.12
Enable or disable Layer3 Filtering.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgPortSlbFilterBmap 1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.13
The filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ filter 9 || || || ||___ filter 8 || |____ filter 7 || . . . ||_________ filter 2 |__________ filter 1 (as index to fltCurCfgTable) where x : 1 - The represented filter rule applied to the port 0 - The represented filter rule not applied to the port
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

slbCurCfgPortInterSwitchVlan 1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.14
VLAN for inter-switch processing.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4090  

slbCurCfgPortVlanBmap 1.3.6.1.4.1.1872.2.5.4.1.1.5.2.1.15
VLANs associated with this port. The VLANs are presented in a bitmap format. OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ VLAN 9 || || || ||___ VLAN 8 || |____ VLAN 7 || . . . ||_________ VLAN 2 |__________ VLAN 1 where x : 1 - VLAN is associated 0 - VLAN is not associated
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slbNewCfgPortTable 1.3.6.1.4.1.1872.2.5.4.1.1.5.3
The table of ports and their SLB states
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewCfgPortEntry

slbNewCfgPortEntry 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1
A row in the slbPortTable
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbNewCfgPortEntry  

slbNewCfgPortIndex 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.1
The port number for which the SLB information pertains.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbNewCfgPortSlbState 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.2
The SLB state of the port. none(1) - not SLB port client(2) - SLB client port server(3) - SLB server port client-server(4) - SLB client and server port
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), client(2), server(3), client-server(4)  

slbNewCfgPortSlbHotStandby 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.3
Enable or disable hot standby processing on the switch port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgPortSlbInterSwitch 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.4
Enable or disable inter-switch processing on the switch port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgPortSlbPipState 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.5
Enable or disable use of proxy IP address on the switch port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgPortSlbRtsState 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.6
Enable or disable RTS processing on the switch port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgPortDelete 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.7
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbNewCfgPortSlbIdslbState 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.8
Enable or disable Intrusion Detection server load balancing.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgPortSlbFilter 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.10
Enable or disable Filtering.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgPortSlbAddFilter 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.11
Specify the Filter Number to be added to this Port table.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..2048  

slbNewCfgPortSlbRemFilter 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.12
Specify the Filter Number to be deleted from this Port table.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..2048  

slbNewCfgPortSlbServState 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.13
Enable or disable Server Processing.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgPortSlbClntState 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.14
Enable or disable Client Processing.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgPortSlbL3Filter 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.15
Enable or disable Layer3 Filtering.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgPortSlbFilterBmap 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.16
The filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ filter 9 || || || ||___ filter 8 || |____ filter 7 || . . . ||_________ filter 2 |__________ filter 1 (as index to fltCurCfgTable) where x : 1 - The represented filter rule applied to the port 0 - The represented filter rule not applied to the port
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

slbNewCfgPortInterSwitchVlan 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.17
VLAN for inter-switch processing.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..4090  

slbNewCfgPortVlanBmap 1.3.6.1.4.1.1872.2.5.4.1.1.5.3.1.18
VLANs associated with this port. The VLANs are presented in a bitmap format. OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ VLAN 9 || || || ||___ VLAN 8 || |____ VLAN 7 || . . . ||_________ VLAN 2 |__________ VLAN 1 where x : 1 - VLAN is associated 0 - VLAN is not associated
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slbCurCfgGlobalControl 1.3.6.1.4.1.1872.2.5.4.1.1.1.1
The global state of Server Load Balancing.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

slbNewCfgGlobalControl 1.3.6.1.4.1.1872.2.5.4.1.1.1.2
The global state of Server Load Balancing.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

slbCurCfgImask 1.3.6.1.4.1.1872.2.5.4.1.1.1.3
The virtual and real IP address mask - corresponding to the imask command of the slb configuration menu.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slbNewCfgImask 1.3.6.1.4.1.1872.2.5.4.1.1.1.4
The virtual and real IP address mask - corresponding to the imask command of the slb configuration menu.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

slbCurCfgMnet 1.3.6.1.4.1.1872.2.5.4.1.1.1.5
The management network - corresponding to the mnet command of the slb configuration menu.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slbNewCfgMnet 1.3.6.1.4.1.1872.2.5.4.1.1.1.6
The management network - corresponding to the mnet command of the slb configuration menu.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

slbCurCfgMmask 1.3.6.1.4.1.1872.2.5.4.1.1.1.7
The management subnet mask - corresponding to the mmask command of the slb configuration menu.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slbNewCfgMmask 1.3.6.1.4.1.1872.2.5.4.1.1.1.8
The management subnet mask - corresponding to the mmask command of the slb configuration menu.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

slbCurCfgRadiusAuthenString 1.3.6.1.4.1.1872.2.5.4.1.1.1.9
The RADIUS authentication string. The string is used for generating encrypted authentication string for RADIUS health check.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbNewCfgRadiusAuthenString 1.3.6.1.4.1.1872.2.5.4.1.1.1.10
The RADIUS authentication string. The string is used for generating encrypted authentication string for RADIUS health check.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbCurCfgDirectMode 1.3.6.1.4.1.1872.2.5.4.1.1.1.11
Enable or disable direct access mode. It allows direct access to real servers and any combination of virtual and real servers when set to enabled(1).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgDirectMode 1.3.6.1.4.1.1872.2.5.4.1.1.1.12
Enable or disable direct access mode. It allows direct access to real servers and any combination of virtual and real servers when set to enabled(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgPmask 1.3.6.1.4.1.1872.2.5.4.1.1.1.13
The persistent mask - corresponding to the pmask command of the slb configuration menu.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slbNewCfgPmask 1.3.6.1.4.1.1872.2.5.4.1.1.1.14
The persistent mask - corresponding to the pmask command of the slb configuration menu.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

slbCurCfgGrace 1.3.6.1.4.1.1872.2.5.4.1.1.1.15
Enable or disable graceful server failure. It allows to keep the connection to the failure real servers when set to enabled(1).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgGrace 1.3.6.1.4.1.1872.2.5.4.1.1.1.16
Enable or disable graceful server failure. It allows to keep the connection to the failure real servers when set to enabled(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgVirtMatrixArch 1.3.6.1.4.1.1872.2.5.4.1.1.1.17
Enable or disable Virtual Matrix Architecture.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVirtMatrixArch 1.3.6.1.4.1.1872.2.5.4.1.1.1.18
Enable or disable Virtual Matrix Architecture.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgFastage 1.3.6.1.4.1.1872.2.5.4.1.1.1.19
Session table fast-age (1 sec) period bit shift.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

slbNewCfgFastage 1.3.6.1.4.1.1872.2.5.4.1.1.1.20
Session table fast-age (1 sec) period bit shift.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

slbCurCfgSlowage 1.3.6.1.4.1.1872.2.5.4.1.1.1.21
Session table slow-age (2 min) period bit shift.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

slbNewCfgSlowage 1.3.6.1.4.1.1872.2.5.4.1.1.1.22
Session table slow-age (2 min) period bit shift.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

slbCurCfgTpcp 1.3.6.1.4.1.1872.2.5.4.1.1.1.23
Enable or disable Transparent Proxy Cache Protocol.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgTpcp 1.3.6.1.4.1.1872.2.5.4.1.1.1.24
Enable or disable Transparent Proxy Cache Protocol.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgMetricInterval 1.3.6.1.4.1.1872.2.5.4.1.1.1.25
The interval of response and bandwidth metric updates.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..256  

slbNewCfgMetricInterval 1.3.6.1.4.1.1872.2.5.4.1.1.1.26
The interval of response and bandwidth metric updates.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..256  

slbCurCfgLdapVersion 1.3.6.1.4.1.1872.2.5.4.1.1.1.27
The version number for LDAP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER version2(1), version3(2)  

slbNewCfgLdapVersion 1.3.6.1.4.1.1872.2.5.4.1.1.1.28
The Version number of LDAP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER version2(1), version3(2)  

slbCurCfgAllowHttpHc 1.3.6.1.4.1.1872.2.5.4.1.1.1.29
Enable or disable allow HTTP health check on any port. If disabled the non-HTTP virtual services will use TCP Health Checks, if enabled the HTTP Content Health Check will be sent to any port except HTTPS (443) if properly configured.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgAllowHttpHc 1.3.6.1.4.1.1872.2.5.4.1.1.1.30
Enable or disable allow HTTP health check on any port. If disabled the non-HTTP virtual services will use TCP Health Checks, if enabled the HTTP Content Health Check will be sent to any port except HTTPS (443) if properly configured.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgSubmac 1.3.6.1.4.1.1872.2.5.4.1.1.1.31
Enable or disable Source MAC Address substitution. Enabling this feature supercedes individual real server setting for Source MAC Address substitution.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgSubmac 1.3.6.1.4.1.1872.2.5.4.1.1.1.32
Enable or disable Source MAC Address substitution. Enabling this feature supercedes individual real server setting for Source MAC Address substitution.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgProxyGratArp 1.3.6.1.4.1.1872.2.5.4.1.1.1.33
Enable or disable Proxy IP Gratuitous ARP.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgProxyGratArp 1.3.6.1.4.1.1872.2.5.4.1.1.1.34
Enable or disable Proxy IP Gratuitous ARP.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgRtsVlan 1.3.6.1.4.1.1872.2.5.4.1.1.1.35
Enable or disable use VLAN info for real server lookup
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgRtsVlan 1.3.6.1.4.1.1872.2.5.4.1.1.1.36
Enable or disable use VLAN info for real server lookup
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgVirtualServiceStats 1.3.6.1.4.1.1872.2.5.4.1.1.1.37
Enable/disable Virtual Service Statistics.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVirtualServiceStats 1.3.6.1.4.1.1872.2.5.4.1.1.1.38
Enable/disable Virtual Service Statistics.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgSlbSessAtkIntrval 1.3.6.1.4.1.1872.2.5.4.1.1.1.39
Set SLB session attack inspection interval.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..3600  

slbNewCfgSlbSessAtkIntrval 1.3.6.1.4.1.1872.2.5.4.1.1.1.40
Set SLB session attack inspection interval.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..3600  

slbCurCfgSlbSessAtkAllowlim 1.3.6.1.4.1.1872.2.5.4.1.1.1.41
Set SLB session attack alert allowable limit.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..11999961  

slbNewCfgSlbSessAtkAllowlim 1.3.6.1.4.1.1872.2.5.4.1.1.1.42
Set SLB session attack alert allowable limit.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..11999961  

slbCurCfgNewSlowage 1.3.6.1.4.1.1872.2.5.4.1.1.1.43
Session table slow-age (2 min) period bit shift.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..14  

slbNewCfgNewSlowage 1.3.6.1.4.1.1872.2.5.4.1.1.1.44
Session table slow-age (2 min) period bit shift.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..14  

slbCurCfgPortBind 1.3.6.1.4.1.1872.2.5.4.1.1.1.45
Enable/disable ingress port for session table Binding. SP uses ingress port for session lookup when set to enable.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgPortBind 1.3.6.1.4.1.1872.2.5.4.1.1.1.46
Enable/disable ingress port for session table Binding. SP uses ingress port for session lookup when set to enable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgVmaSrcPort 1.3.6.1.4.1.1872.2.5.4.1.1.1.47
Enable/disable VMA source port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVmaSrcPort 1.3.6.1.4.1.1872.2.5.4.1.1.1.48
Enable/disable VMA source port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgIpTcpCksum 1.3.6.1.4.1.1872.2.5.4.1.1.1.49
Enable/disable Layer 7 IP/TCP Checksum Validation.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgIpTcpCksum 1.3.6.1.4.1.1872.2.5.4.1.1.1.50
Enable/disable Layer 7 IP/TCP Checksum Validation.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgAuxRipHash 1.3.6.1.4.1.1872.2.5.4.1.1.1.51
Enable/disable Include RIP in AUX table hashing.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgAuxRipHash 1.3.6.1.4.1.1872.2.5.4.1.1.1.52
Enable/disable Include RIP in AUX table hashing.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgClearBackup 1.3.6.1.4.1.1872.2.5.4.1.1.1.53
Enable/Disable clear backup in the current config.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgClearBackup 1.3.6.1.4.1.1872.2.5.4.1.1.1.54
Enable/Disable clear backup in the new config.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgmStat 1.3.6.1.4.1.1872.2.5.4.1.1.1.55
Measuring period for Acceleration, HTTP and SSL offloading statistics in the current config.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..3600  

slbNewCfgmStat 1.3.6.1.4.1.1872.2.5.4.1.1.1.56
Measuring period for Acceleration, HTTP and SSL offloading statistics in the new config.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..3600  

slbCurCfgvStat 1.3.6.1.4.1.1872.2.5.4.1.1.1.57
Enable/Disable Virtual Service Statistics in the current config.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgvStat 1.3.6.1.4.1.1872.2.5.4.1.1.1.58
Enable/Disable Virtual Service Statistics in the new config.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgVmaDip 1.3.6.1.4.1.1872.2.5.4.1.1.1.59
Enable/Disable VMA with destination IP in the current config.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgVmaDip 1.3.6.1.4.1.1872.2.5.4.1.1.1.60
Enable/Disable VMA with destination IP in the new config.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgClsRst 1.3.6.1.4.1.1872.2.5.4.1.1.1.61
Enable/Disable Session clear on RST in the current config.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgClsRst 1.3.6.1.4.1.1872.2.5.4.1.1.1.62
Enable/Disable Session clear on RST in the new config.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgRtsIpLkp 1.3.6.1.4.1.1872.2.5.4.1.1.1.63
Enable/Disable RTS-IP lookup in the current config.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgRtsIpLkp 1.3.6.1.4.1.1872.2.5.4.1.1.1.64
Enable/Disable RTS-IP lookup in the new config.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgPprefix 1.3.6.1.4.1.1872.2.5.4.1.1.1.65
The ipv6 persistent prefix length - corresponding to the pmask command of the slb configuration menu.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..128  

slbNewCfgPprefix 1.3.6.1.4.1.1872.2.5.4.1.1.1.66
The ipv6 persistent prefix length - corresponding to the pmask command of the slb configuration menu.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..128  

slbCurCfgSubdmac 1.3.6.1.4.1.1872.2.5.4.1.1.1.67
Enable or disable DMAC substitution. Enabling this feature supercedes individual real server setting for DMAC substitution.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgSubdmac 1.3.6.1.4.1.1872.2.5.4.1.1.1.68
Enable or disable DMAC substitution. Enabling this feature supercedes individual real server setting for DMAC substitution.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgpVlanTag 1.3.6.1.4.1.1872.2.5.4.1.1.1.69
Enable or disable preserving vlan tag during packet forwarding
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgpVlanTag 1.3.6.1.4.1.1872.2.5.4.1.1.1.70
Enable or disable preserving vlan tag during packet forwarding
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgNmask 1.3.6.1.4.1.1872.2.5.4.1.1.1.71
The session mask in the current config block.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slbNewCfgNmask 1.3.6.1.4.1.1872.2.5.4.1.1.1.72
The session mask in the new config block.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

slbCurCfgWaphcWSPPort 1.3.6.1.4.1.1872.2.5.4.1.1.8.1
The WSP port number to health check.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65534  

slbNewCfgWaphcWSPPort 1.3.6.1.4.1.1872.2.5.4.1.1.8.2
The WSP port number to health check.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65534  

slbCurCfgWaphcOffset 1.3.6.1.4.1.1872.2.5.4.1.1.8.3
The offset in received WSP packet.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..256  

slbNewCfgWaphcOffset 1.3.6.1.4.1.1872.2.5.4.1.1.8.4
The offset in received WSP packet.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..256  

slbCurCfgWaphcSndContent 1.3.6.1.4.1.1872.2.5.4.1.1.8.5
The content to be sent to the WAP gateway.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

slbNewCfgWaphcSndContent 1.3.6.1.4.1.1872.2.5.4.1.1.8.6
The content to be sent to the WAP gateway.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

slbCurCfgWaphcRcvContent 1.3.6.1.4.1.1872.2.5.4.1.1.8.7
The content to be received from the WAP gateway.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

slbNewCfgWaphcRcvContent 1.3.6.1.4.1.1872.2.5.4.1.1.8.8
The content to be received from the WAP gateway.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

slbCurCfgWaphcWTLSPort 1.3.6.1.4.1.1872.2.5.4.1.1.8.9
The WTLS port number to health check.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65534  

slbNewCfgWaphcWTLSPort 1.3.6.1.4.1.1872.2.5.4.1.1.8.10
The WTLS port number to health check.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65534  

slbCurCfgWaphcWTPSndContent 1.3.6.1.4.1.1872.2.5.4.1.1.8.11
The WTP+WSP content to be sent to the WAP gateway.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

slbNewCfgWaphcWTPSndContent 1.3.6.1.4.1.1872.2.5.4.1.1.8.12
The WTP+WSP content to be sent to the WAP gateway.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

slbCurCfgWaphcWTPRcvContent 1.3.6.1.4.1.1872.2.5.4.1.1.8.13
The WTP+WSP content to be received from the WAP gateway.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

slbNewCfgWaphcWTPRcvContent 1.3.6.1.4.1.1872.2.5.4.1.1.8.14
The WTP+WSP content to be received from the WAP gateway.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

slbCurCfgWaphcWTPConnContent 1.3.6.1.4.1.1872.2.5.4.1.1.8.15
The WTP+WSP CONNECT content to be sent to the WAP gateway.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

slbNewCfgWaphcWTPConnContent 1.3.6.1.4.1.1872.2.5.4.1.1.8.16
The WTP+WSP CONNECT content to be sent to the WAP gateway.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

slbCurCfgWaphcWTPPort 1.3.6.1.4.1.1872.2.5.4.1.1.8.17
The WTP port number to health check.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65534  

slbNewCfgWaphcWTPPort 1.3.6.1.4.1.1872.2.5.4.1.1.8.18
The WTP port number to health check.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65534  

slbCurCfgWaphcWTLSWSPPort 1.3.6.1.4.1.1872.2.5.4.1.1.8.19
The WTLS+WSP port number to health check.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65534  

slbNewCfgWaphcWTLSWSPPort 1.3.6.1.4.1.1872.2.5.4.1.1.8.20
The WTLS+WSP port number to health check.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65534  

slbCurCfgWaphcWTPOffset 1.3.6.1.4.1.1872.2.5.4.1.1.8.21
The offset in received WTP packet.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..256  

slbNewCfgWaphcWTPOffset 1.3.6.1.4.1.1872.2.5.4.1.1.8.22
The offset in received WTP packet.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..256  

slbCurCfgWaphcCouple 1.3.6.1.4.1.1872.2.5.4.1.1.8.23
Enable or disable coupling of WAP and RADIUS Accounting health checks.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgWaphcCouple 1.3.6.1.4.1.1872.2.5.4.1.1.8.24
Enable or disable coupling of WAP and RADIUS Accounting health checks.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgWaphcConnPDU 1.3.6.1.4.1.1872.2.5.4.1.1.8.25
The CONNECT PDU to be sent to the WAP gateway.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

slbNewCfgWaphcConnPDU 1.3.6.1.4.1.1872.2.5.4.1.1.8.26
The CONNECT PDU to be sent to the WAP gateway.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

slbCurCfgWaphcSndPDU 1.3.6.1.4.1.1872.2.5.4.1.1.8.27
The GET PDU to be sent to the WAP gateway.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

slbNewCfgWaphcSndPDU 1.3.6.1.4.1.1872.2.5.4.1.1.8.28
The GET PDU to be sent to the WAP gateway.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

slbCurCfgWaphcRcvPDU 1.3.6.1.4.1.1872.2.5.4.1.1.8.29
The REPLY PDU to be received from the WAP gateway.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

slbNewCfgWaphcRcvPDU 1.3.6.1.4.1.1872.2.5.4.1.1.8.30
The REPLY PDU to be received from the WAP gateway.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

slbCurCfgWapTpcp 1.3.6.1.4.1.1872.2.5.4.1.1.7.1
Enable or disable WAP load balancing.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgWapTpcp 1.3.6.1.4.1.1872.2.5.4.1.1.7.2
Enable or disable WAP load balancing.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgWapDebug 1.3.6.1.4.1.1872.2.5.4.1.1.7.3
WAP Debug level.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..10  

slbNewCfgWapDebug 1.3.6.1.4.1.1872.2.5.4.1.1.7.4
WAP Debug level.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..10  

slbPeerTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.6.2
The maximum number of entries in SLB Peer Table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgPeerTable 1.3.6.1.4.1.1872.2.5.4.1.1.6.3
The table of Synch Peer Switch configuration in the current_config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurCfgPeerEntry

slbCurCfgPeerEntry 1.3.6.1.4.1.1872.2.5.4.1.1.6.3.1
Information about Synch Peer Switch configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbCurCfgPeerEntry  

slbCurCfgPeerIndex 1.3.6.1.4.1.1872.2.5.4.1.1.6.3.1.1
The index for synch peer switchs.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgPeerIpAddr 1.3.6.1.4.1.1872.2.5.4.1.1.6.3.1.2
The IP address of the peer switch.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slbCurCfgPeerState 1.3.6.1.4.1.1872.2.5.4.1.1.6.3.1.3
Enable or disable the peer switch.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

slbCurCfgPeerIpv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.6.3.1.4
The IPv6 address of the Peer switch. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

slbCurCfgPeerIpVersion 1.3.6.1.4.1.1872.2.5.4.1.1.6.3.1.5
Peer Ip Address Version.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ipv4(4), ipv6(6)  

slbNewCfgPeerTable 1.3.6.1.4.1.1872.2.5.4.1.1.6.4
The table of Synch Peer Switch configuration in the new_config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewCfgPeerEntry

slbNewCfgPeerEntry 1.3.6.1.4.1.1872.2.5.4.1.1.6.4.1
Information about synch peer switch configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbNewCfgPeerEntry  

slbNewCfgPeerIndex 1.3.6.1.4.1.1872.2.5.4.1.1.6.4.1.1
The index number for synch peer switchs.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbNewCfgPeerIpAddr 1.3.6.1.4.1.1872.2.5.4.1.1.6.4.1.2
The IP address of the peer switch.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

slbNewCfgPeerState 1.3.6.1.4.1.1872.2.5.4.1.1.6.4.1.3
Enable or disable the peer switch.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

slbNewCfgPeerDelete 1.3.6.1.4.1.1872.2.5.4.1.1.6.4.1.4
By setting the value to delete(2), the entire row is deleted.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbNewCfgPeerIpv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.6.4.1.5
The IPv6 address of the Peer switch. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..40)  

slbNewCfgPeerIpVersion 1.3.6.1.4.1.1872.2.5.4.1.1.6.4.1.6
Peer Ip Address Version.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ipv4(4), ipv6(6)  

slbCurCfgPeerPIPTable 1.3.6.1.4.1.1872.2.5.4.1.1.21.1
The table of Peer PIP configuration in the current_config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurCfgPeerPIPEntry

slbCurCfgPeerPIPEntry 1.3.6.1.4.1.1872.2.5.4.1.1.21.1.1
Information about Peer PIP configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbCurCfgPeerPIPEntry  

slbCurCfgPeerPIPIndex 1.3.6.1.4.1.1872.2.5.4.1.1.21.1.1.1
The index for peer PIP.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgPeerPIPAddr 1.3.6.1.4.1.1872.2.5.4.1.1.21.1.1.2
The IP address of the peer PIP.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slbCurCfgPeerPIPv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.21.1.1.3
The IPv6 address of the Peer PIP. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

slbNewCfgPeerPIPTable 1.3.6.1.4.1.1872.2.5.4.1.1.21.2
The table of Peer PIP configuration in the new_config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewCfgPeerPIPEntry

slbNewCfgPeerPIPEntry 1.3.6.1.4.1.1872.2.5.4.1.1.21.2.1
Information about Peer PIP configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbNewCfgPeerPIPEntry  

slbNewCfgPeerPIPIndex 1.3.6.1.4.1.1872.2.5.4.1.1.21.2.1.1
The index for peer PIP.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbNewCfgPeerPIPAddr 1.3.6.1.4.1.1872.2.5.4.1.1.21.2.1.2
The IP address of the peer PIP.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

slbNewCfgPeerPIPv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.21.2.1.3
The IPv6 address of the Peer PIP. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..40)  

slbNewCfgPeerPIPDelete 1.3.6.1.4.1.1872.2.5.4.1.1.21.2.1.4
By setting the value to delete(2), the entire row is deleted.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbCurCfgSyncFilt 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.1
Enable or disable synch filter configuration.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgSyncFilt 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.2
Enable or disable synch filter configuration.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgSyncPort 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.3
Enable or disable synch port configuration.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgSyncPort 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.4
Enable or disable synch port configuration.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgSyncVrrp 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.5
Enable or disable synch VRRP Priorities.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgSyncVrrp 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.6
Enable or disable synch VRRP Priorities.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgSyncPip 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.7
Enable or disable synch proxy IP addresses.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgSyncPip 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.8
Enable or disable synch proxy IP addresses.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgSyncSfo 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.9
Enable or disable synch stateful failover.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgSyncSfo 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.10
Enable or disable synch stateful failover.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgSyncSfoUpdatePeriod 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.11
The stateful failover update period in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..60  

slbNewCfgSyncSfoUpdatePeriod 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.12
The stateful failover update period in seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..60  

slbCurCfgSyncBwm 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.13
Enable or disable syncing BWM configuration.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgSyncBwm 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.14
Enable or disable syncing BWM configuration.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgSyncPeerPip 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.15
Enable or disable synch peer proxy IP addresses.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgSyncPeerPip 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.16
Enable or disable synch peer proxy IP addresses.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgSyncCerts 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.17
Enable or disable syncing certificate repository components.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgSyncCerts 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.18
Enable or disable syncing certificate repository components. If Enable option is selected then Passphrase to encrypt/decrypt certificates and private keys during configuration sync must be set in all peer switches.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgSyncCertsPassPhrase 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.19
Set passphrase to encrypt/decrypt synced certificates' and dnssec private keys.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbNewCfgSyncCertsPassPhrase 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.20
Set passphrase to encrypt/decrypt synced certificates' and dnssec private keys.Same PassPhrase should be set at all peer switches.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbNewCfgSyncCertsConfPassPhrase 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.21
This character string is used to confirm Passphrase which is already entered in slbNewCfgSyncCertsPassPhrase.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbCurCfgSyncRoute 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.22
Enable or disable synch static route configuration.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgSyncRoute 1.3.6.1.4.1.1872.2.5.4.1.1.6.1.23
Enable or disable synch static route configuration.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

synAttackCurCfgInterval 1.3.6.1.4.1.1872.2.5.4.1.1.9.1
The interval specified in seconds determines how frequently the switch checks for SYN attacks.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 2..3600  

synAttackNewCfgInterval 1.3.6.1.4.1.1872.2.5.4.1.1.9.2
The interval specified in seconds determines how frequently the switch checks for SYN attacks.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 2..3600  

synAttackCurCfgThreshhold 1.3.6.1.4.1.1872.2.5.4.1.1.9.3
The threshhold indicating the number of new half-open sessions per second.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..100000  

synAttackNewCfgThreshhold 1.3.6.1.4.1.1872.2.5.4.1.1.9.4
The threshhold indicating the number of new half-open sessions per second.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..100000  

synAttackCurCfgResponseInterval 1.3.6.1.4.1.1872.2.5.4.1.1.9.5
The interval specified in milliseconds determines how frequently the switch generate new SYN cookie value.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 10..1000  

synAttackNewCfgResponseInterval 1.3.6.1.4.1.1872.2.5.4.1.1.9.6
The interval specified in milliseconds determines how frequently the switch generate new SYN cookie value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 10..1000  

synAttackCurCfgOnOff 1.3.6.1.4.1.1872.2.5.4.1.1.9.7
Globally ON or OFF of SYN Protection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

synAttackNewCfgOnOff 1.3.6.1.4.1.1872.2.5.4.1.1.9.8
Globally ON or OFF of SYN Protection.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

fltCfgTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.2.1
The maximum number of filtering table entries.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

fltCurCfgTable 1.3.6.1.4.1.1872.2.5.4.1.2.2
The filtering table in the current configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FltCurCfgTableEntry

fltCurCfgTableEntry 1.3.6.1.4.1.1872.2.5.4.1.2.2.1
A row in the filtering table.
Status: current Access: not-accessible
OBJECT-TYPE    
  FltCurCfgTableEntry  

fltCurCfgIndx 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.1
The filtering table index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

fltCurCfgSrcIp 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.2
The source IP address to be filtered.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

fltCurCfgSrcIpMask 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.3
The source IP sub-net mask for filtering.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

fltCurCfgDstIp 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.4
The destination IP address to be filtered.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

fltCurCfgDstIpMask 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.5
The destination IP sub-net mask for filtering.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

fltCurCfgProtocol 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.6
The protocol to be filtered.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

fltCurCfgRangeHighSrcPort 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.7
The higher source TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or TCP. '0' means no filtering.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65534  

fltCurCfgRangeLowSrcPort 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.8
The lower source TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or TCP. '0' means no filtering.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65534  

fltCurCfgRangeLowDstPort 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.9
The lower destination TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or TCP. '0' means no filtering.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65534  

fltCurCfgRangeHighDstPort 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.10
The higher destination TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or TCP. '0' means no filtering.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65534  

fltCurCfgAction 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.11
The action for the filtering rule.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER allow(1), deny(2), redirect(3), nat(4), goto(5)  

fltCurCfgRedirPort 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.12
The real server port number used for redirection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65534  

fltCurCfgRedirGroup 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.13
The real server group to be redirected to.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

fltCurCfgLog 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.14
Enable or disable logging.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgState 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.15
The state of this filtering rule.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgNat 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.16
The selection of destination or source or multicast for network address translation.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER destination-address(1), source-address(2), multicast-address(3)  

fltCurCfgCache 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.17
Enable or disable caching sessions that match filter.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgInvert 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.18
Turn the invert logic on or off for the filter entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgClientProxy 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.19
Enable or disable client proxy.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgTcpAck 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.20
Enable or disable filtering on matching TCP ACK and RST flag.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgSrcMac 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.22
The source MAC address to be filtered.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

fltCurCfgDstMac 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.23
The Destination MAC address to be filtered.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

fltCurCfgFtpNatActive 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.24
Enable or disable FTP NAT for active ftp only.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgAclTcpUrg 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.25
Enable or disable TCP URG packet.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

fltCurCfgAclTcpAck 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.26
Enable or disable TCP ACK packet.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

fltCurCfgAclTcpPsh 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.27
Enable or disable TCP PSH packet.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

fltCurCfgAclTcpRst 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.28
Enable or disable TCP RST packet.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

fltCurCfgAclTcpSyn 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.29
Enable or disable TCP SYN packet.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

fltCurCfgAclTcpFin 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.30
Enable or disable TCP FIN packet.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

fltCurCfgAclIcmp 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.31
ICMP type to be filtered. A ICMP type of 255 indicates 'any'
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

fltCurCfgAclIpOption 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.32
Enable or disable IP option matching.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

fltCurCfgBwmContract 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.33
Filt default BW contract number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

fltCurCfgAclIpTos 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.34
The IP TOS value to be filtered.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

fltCurCfgAclIpTosMask 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.35
The IP TOS mask for filtering.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

fltCurCfgAclIpTosNew 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.36
The new IP TOS value to over-write when filtering fired.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

fltCurCfgFwlb 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.37
Enable or disable filtering on firewall redirect hash method.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgNatTimeout 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.38
The NAT session timeout. The timeout value should be an even number between 4 and 32768.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 4..32768  

fltCurCfgLinklb 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.39
Enable or disable WAN link load balancing.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgWapRadiusSnoop 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.40
Enable or disable WAP RADIUS snooping.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgSrcIpMac 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.41
Set a flag indicating whether filtering should be based on the source IP address or the source MAC address field.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ip(1), mac(2)  

fltCurCfgDstIpMac 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.42
Set a flag indicating whether filtering should be based on the destination IP address or the destination MAC address field.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ip(1), mac(2)  

fltCurCfgIdslbHash 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.43
Set hash parameter for intrusion detection server load balancing.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER sip(1), dip(2), both(3)  

fltCurCfgVlan 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.44
Set the VLAN assoicated with the filter.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..4090  

fltCurCfgName 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.45
The name of the filter.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

fltCurCfgTcpRateLimit 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.46
Enable or disable protocol rate limiting.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgTcpRateMaxConn 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.47
Set maximum connections (number of connections in units of 10) for TCP connection rate limiting. In the case of ICMP and UDP, this is the maximum packets (number of packets in units of 10).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

fltCurCfgHash 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.48
Set hash parameter for the filter.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER auto(1), sip(2), dip(3), both(4), sipsport(5)  

fltCurCfgLayer7DenyState 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.50
Enable or disable layer 7 deny filtering.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgLayer7DenyUrlBmap 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.51
The URL strings selected for Layer 7 deny filters. The selected URL strings are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ URL Path 9 || || || ||___ URL Path 8 || |____ URL Path 7 || . . . ||_________ URL Path 2 |__________ URL Path 1 where x : 1 - The represented URL string is selected 0 - The represented URL string is not selected
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

fltCurCfgGotoFilter 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.52
The filter ID for GOTO action in the current config.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

fltCurCfgRadiusWapPersist 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.53
Enable or disable Radius/WAP persistence.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgPbind 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.54
Enable or disable filter persistent binding.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgTimeWindow 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.55
The time window for protocol rate limiting (in seconds).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

fltCurCfgHoldDuration 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.56
The hold down duration for protocol rate limiting (in minutes).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 2..65535  

fltCurCfgPatternMatch 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.57
Enable or disable binary pattern matching.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgLayer7DenyMatchAll 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.58
Enable or disable match-all criteria for L7 deny string matching.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgProxyIp 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.59
The client proxy IP address for NAT and REDIR filter.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

fltCurCfgLayer7ParseAll 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.60
Enable or disable layer 7 lookup (parsing) of all packets.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgSecurityParseAll 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.61
Enable or disable pattern string lookup (parsing) of all packets.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgPatternMatchGroupBmap 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.62
The pattern match group. The pattern match groups are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ pattern match group || || || ||___ pattern match group 8 || |____ pattern match group 7 || . . . ||_________ pattern match group 2 |__________ pattern match group 1 where x : 1 - The represented pattern match group is selected 0 - The represented pattern match group is not selected
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

fltCurCfg8021pBitsValue 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.63
The 802.1p bits value to match.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

fltCurCfg8021pBitsMatch 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.64
Enable or disable matching on 802.1p bits in the packets.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgAclIpLength 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.65
Set the IP maximum packet length in bytes. A value can be either 0 which indicates 'any' length or between 64 and 65535.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

fltCurCfgIdsGroup 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.66
The real server group for IDS load balancing. A value of 0 indicates 'none'.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

fltCurCfgEgressPip 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.67
Enable or disable pip selection based on egress port/vlan.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgDbind 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.68
Enable or disable filter delayed binding.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgRevBwmContract 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.69
Filt reverse session BWM contract number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

fltCurCfgReverse 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.70
Enable or disable creating session for reverse side traffic.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgParseChn 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.71
Enable or disable chained pgroup match criteria for l7 filtering.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgRtpBwmContract 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.72
BWM contract for SIP RTP traffic.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

fltCurCfgSipParsing 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.73
Enable or disable SIP NAT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgSessionMirror 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.74
Enable or disable session mirroring.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgIpVer 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.75
The type of IP address.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2)  

fltCurCfgIpv6Sip 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.76
The source IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

fltCurCfgIpv6Sprefix 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.77
The prefix length associated with source IP address .
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..128  

fltCurCfgIpv6Dip 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.78
The destination IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

fltCurCfgIpv6Dprefix 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.79
The prefix length associated with destination IP address .
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..128  

fltCurCfgHdrHash 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.80
The header hash filter.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), headerhash(2)  

fltCurCfgHdrName 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.81
The header name of the filter.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

fltCurCfgHdrHashLen 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.82
The header hash length of the filter.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

fltCurCfgL3Filter 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.83
The L3 filter processing state for this filter.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgNatIp 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.84
The nat IP address to be filtered.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

fltCurCfgIpv6Nip 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.85
The nat IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

fltCurCfgIpv6Proxy 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.86
The proxy IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

fltCurCfgL7SipFilt 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.87
Enable/Disable L7 application SIP UDP filtering.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgNatMcastVlan 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.88
Multicast VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..4090  

fltCurCfgNbind 1.3.6.1.4.1.1872.2.5.4.1.2.2.1.89
Enable or disable subnet binding for redirection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgTable 1.3.6.1.4.1.1872.2.5.4.1.2.3
The filtering table in the new configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FltNewCfgTableEntry

fltNewCfgTableEntry 1.3.6.1.4.1.1872.2.5.4.1.2.3.1
A row in the filtering table.
Status: current Access: not-accessible
OBJECT-TYPE    
  FltNewCfgTableEntry  

fltNewCfgIndx 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.1
The filtering table index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

fltNewCfgSrcIp 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.2
The source IP address to be filtered.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

fltNewCfgSrcIpMask 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.3
The source IP sub-net mask for filtering.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

fltNewCfgDstIp 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.4
The destination IP address to be filtered.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

fltNewCfgDstIpMask 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.5
The destination IP sub-net mask for filtering.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

fltNewCfgProtocol 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.6
The protocol to be filtered.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

fltNewCfgRangeHighSrcPort 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.7
The higher source TCP/UDP port number to be filtered. It applies only when protocol defined in fltNewCfgProtocol is UDP or TCP. '0' means no filtering.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65534  

fltNewCfgRangeLowSrcPort 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.8
The lower source TCP/UDP port number to be filtered. It applies only when protocol defined in fltNewCfgProtocol is UDP or TCP. '0' means no filtering.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65534  

fltNewCfgRangeLowDstPort 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.9
The lower destination TCP/UDP port number to be filtered. It applies only when protocol defined in fltNewCfgProtocol is UDP or TCP. '0' means no filtering.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65534  

fltNewCfgRangeHighDstPort 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.10
The higher destination TCP/UDP port number to be filtered. It applies only when protocol defined in fltNewCfgProtocol is UDP or TCP. '0' means no filtering.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65534  

fltNewCfgAction 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.11
The action for the filtering rule.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER allow(1), deny(2), redirect(3), nat(4), goto(5)  

fltNewCfgRedirPort 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.12
The real server port number used for redirection.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65534  

fltNewCfgRedirGroup 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.13
The real server group to be redirected to.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

fltNewCfgLog 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.14
Enable or disable logging.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgState 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.15
The state of this filtering rule.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgDelete 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.16
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

fltNewCfgNat 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.17
The selection of destination or source or multicast for network address translation.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER destination-address(1), source-address(2), multicast-address(3)  

fltNewCfgCache 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.18
Enable or disable caching sessions that match filter.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgInvert 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.19
Turn the invert logic on or off for the filter entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgClientProxy 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.20
Enable or disable client proxy.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgTcpAck 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.21
Enable or disable filtering on matching TCP ACK and RST flag.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgSrcMac 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.23
The source MAC address to be filtered.
Status: current Access: read-create
OBJECT-TYPE    
  PhysAddress  

fltNewCfgDstMac 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.24
The Destination MAC address to be filtered.
Status: current Access: read-create
OBJECT-TYPE    
  PhysAddress  

fltNewCfgFtpNatActive 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.25
Enable or disable FTP NAT for active ftp.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgAclTcpUrg 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.26
Enable or disable TCP URG packet.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

fltNewCfgAclTcpAck 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.27
Enable or disable TCP ACK packet.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

fltNewCfgAclTcpPsh 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.28
Enable or disable TCP PSH packet.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

fltNewCfgAclTcpRst 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.29
Enable or disable TCP RST packet.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

fltNewCfgAclTcpSyn 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.30
Enable or disable TCP SYN packet.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

fltNewCfgAclTcpFin 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.31
Enable or disable TCP FIN packet.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

fltNewCfgAclIcmp 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.32
ICMP type to be filtered. A ICMP type of 255 indicates 'any'
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

fltNewCfgAclIpOption 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.33
Enable or disable IP option matching.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

fltNewCfgBwmContract 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.34
Filt default BW contract number.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

fltNewCfgAclIpTos 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.35
The IP TOS value to be filtered.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

fltNewCfgAclIpTosMask 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.36
The IP TOS mask for filtering.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

fltNewCfgAclIpTosNew 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.37
The new IP TOS value to over-write when filtering fired.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

fltNewCfgFwlb 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.38
Enable or disable filtering on firewall redirect hash method.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgNatTimeout 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.39
The NAT session timeout. The timeout value should be an even number between 4 and 32768.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 4..32768  

fltNewCfgLinklb 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.40
Enable or disable WAN link load balancing.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgWapRadiusSnoop 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.41
Enable or disable WAP RADIUS snooping.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgSrcIpMac 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.42
Set a flag indicating whether filtering should be based on the source IP address or the source MAC address field.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ip(1), mac(2)  

fltNewCfgDstIpMac 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.43
Set a flag indicating whether filtering should be based on the destination IP address or the destination MAC address field.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ip(1), mac(2)  

fltNewCfgIdslbHash 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.44
Set hash parameter for intrusion detection server load balancing.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER sip(1), dip(2), both(3)  

fltNewCfgVlan 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.45
Set the VLAN assoicated with the filter.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..4090  

fltNewCfgName 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.46
The name of the filter.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..31)  

fltNewCfgTcpRateLimit 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.47
Enable or disable protocol rate limiting.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgTcpRateMaxConn 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.48
Set maximum connections (number of connections in units of 10) for TCP connection rate limiting. In the case of ICMP and UDP, this is the maximum packets (number of packets in units of 10).
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

fltNewCfgHash 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.49
Set hash parameter for the filter.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER auto(1), sip(2), dip(3), both(4), sipsport(5)  

fltNewCfgLayer7DenyState 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.51
Enable or disable layer 7 deny filtering.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgLayer7DenyUrlBmap 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.52
The URL strings selected for Layer 7 deny filters. The selected URL strings are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ URL Path 9 || || || ||___ URL Path 8 || |____ URL Path 7 || . . . ||_________ URL Path 2 |__________ URL Path 1 where x : 1 - The represented URL string is selected 0 - The represented URL string is not selected
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

fltNewCfgLayer7DenyAddUrl 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.53
The URL Path (slbCurCfgUrlLbPathIndex) to be added to the Layer 7 deny filter. A zero is returned when read.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

fltNewCfgLayer7DenyRemUrl 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.54
The URL Path (slbCurCfgUrlLbPathIndex) to be removed from the Layer 7 deny filter. A zero is returned when read.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

fltNewCfgGotoFilter 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.55
The filter ID for GOTO action in the new config.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

fltNewCfgRadiusWapPersist 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.56
Enable or disable Radius/WAP persistence.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgPbind 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.57
Enable or disable filter persistent binding.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgTimeWindow 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.58
The time window for protocol rate limiting (in seconds).
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..65535  

fltNewCfgHoldDuration 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.59
The hold down duration for protocol rate limiting (in minutes).
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 2..65535  

fltNewCfgPatternMatch 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.60
Enable or disable binary pattern matching.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgLayer7DenyMatchAll 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.61
Enable or disable match-all criteria for L7 deny string matching.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgProxyIp 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.62
The client proxy IP address for NAT and REDIR filter.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

fltNewCfgLayer7ParseAll 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.63
Enable or disable layer 7 lookup (parsing) of all packets.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgSecurityParseAll 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.64
Enable or disable pattern string lookup (parsing) of all packets.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgPatternMatchGroupBmap 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.65
The pattern match group. The pattern match groups are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ pattern match group || || || ||___ pattern match group 8 || |____ pattern match group 7 || . . . ||_________ pattern match group 2 |__________ pattern match group 1 where x : 1 - The represented pattern match group is selected 0 - The represented pattern match group is not selected
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

fltNewCfgAddPatternMatchGroup 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.66
The pattern match group to be added to the security filter. A zero is returned when read.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

fltNewCfgRemPatternMatchGroup 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.67
The pattern match group to be to be removed from the security filter. A zero is returned when read.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

fltNewCfg8021pBitsValue 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.68
The 802.1p bits value to match.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..7  

fltNewCfg8021pBitsMatch 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.69
Enable or disable matching on 802.1p bits in the packets.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgAclIpLength 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.70
Set the IP maximum packet length in bytes. A value can be either 0 which indicates 'any' length or between 64 and 65535.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

fltNewCfgIdsGroup 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.71
The real server group for IDS load balancing. A value of 0 indicates 'none'.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

fltNewCfgEgressPip 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.72
Enable or disable pip selection based on egress port/vlan.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgDbind 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.73
Enable or disable filter delayed binding.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgRevBwmContract 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.74
Filt reverse session BWM contract number.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

fltNewCfgReverse 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.75
Enable or disable creating session for reverse side traffic.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgParseChn 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.76
Enable or disable chained pgroup match criteria for l7 filtering.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgRtpBwmContract 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.77
BWM contract for SIP RTP traffic.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

fltNewCfgSipParsing 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.78
Enable or disable SIP NAT.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgSessionMirror 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.79
Enable or disable session mirroring.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgIpVer 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.80
The type of IP address.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2)  

fltNewCfgIpv6Sip 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.81
The source IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..40)  

fltNewCfgIpv6Sprefix 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.82
The prefix length associated with source IP address .
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..128  

fltNewCfgIpv6Dip 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.83
The destination IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..40)  

fltNewCfgIpv6Dprefix 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.84
The prefix length associated with destination IP address .
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..128  

fltNewCfgHdrHash 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.85
The header hash filter.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(1), headerhash(2)  

fltNewCfgHdrName 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.86
The header name of the filter. Headerhash should be enabled before header name is configured.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..31)  

fltNewCfgHdrHashLen 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.87
The header hash length of the filter. Headerhash should be enabled before hash length is configured.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..255  

fltNewCfgL3Filter 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.88
The L3 filter processing state for this filter.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgNatIp 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.89
The nat IP address to be filtered.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

fltNewCfgIpv6Nip 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.90
The nat IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

fltNewCfgIpv6Proxy 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.91
The proxy IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

fltNewCfgL7SipFilt 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.92
Enable/Disable L7 application SIP UDP filtering.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgNatMcastVlan 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.93
Multicast VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..4090  

fltNewCfgNbind 1.3.6.1.4.1.1872.2.5.4.1.2.3.1.94
Enable or disable subnet binding for redirection.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgExtendedTable 1.3.6.1.4.1.1872.2.5.4.1.2.12
The filtering table in the new configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FltNewCfgExtendedTableEntry

fltNewCfgExtendedTableEntry 1.3.6.1.4.1.1872.2.5.4.1.2.12.1
A row in the filtering table.
Status: current Access: not-accessible
OBJECT-TYPE    
  FltNewCfgExtendedTableEntry  

fltNewCfgExtendedIndx 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.1
The filtering table index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

fltNewCfgExtendedLayer7DenyState 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.3
Enable or disable layer 7 deny filtering.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgExtendedLayer7DenyUrlBmap 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.4
The URL strings selected for Layer 7 deny filters. The selected URL strings are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ URL Path 9 || || || ||___ URL Path 8 || |____ URL Path 7 || . . . ||_________ URL Path 2 |__________ URL Path 1 where x : 1 - The represented URL string is selected 0 - The represented URL string is not selected
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

fltNewCfgExtendedLayer7DenyAddUrl 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.5
The URL Path (slbCurCfgUrlLbPathIndex) to be added to the Layer 7 deny filter. A zero is returned when read.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

fltNewCfgExtendedLayer7DenyRemUrl 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.6
The URL Path (slbCurCfgUrlLbPathIndex) to be removed from the Layer 7 deny filter. A zero is returned when read.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

fltNewCfgExtendedGotoFilter 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.7
The filter ID for GOTO action in the new config.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

fltNewCfgExtendedRadiusWapPersist 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.8
Enable or disable Radius/WAP persistence.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgExtendedPbind 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.9
Enable or disable filter persistent binding.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgExtendedTimeWindow 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.10
The time window for protocol rate limiting (in seconds).
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..65535  

fltNewCfgExtendedHoldDuration 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.11
The hold down duration for protocol rate limiting (in minutes).
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 2..65535  

fltNewCfgExtendedPatternMatch 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.12
Enable or disable binary pattern matching.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgExtendedLayer7DenyMatchAll 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.13
Enable or disable match-all criteria for L7 deny string matching.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgExtendedProxyIp 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.14
The client proxy IP address for NAT and REDIR filter.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

fltNewCfgExtendedLayer7ParseAll 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.15
Enable or disable layer 7 lookup (parsing) of all packets.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgExtendedSecurityParseAll 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.16
Enable or disable pattern string lookup (parsing) of all packets.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgExtendedPatternMatchGroupBmap 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.17
The pattern match group. The pattern match groups are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ pattern match group || || || ||___ pattern match group 8 || |____ pattern match group 7 || . . . ||_________ pattern match group 2 |__________ pattern match group 1 where x : 1 - The represented pattern match group is selected 0 - The represented pattern match group is not selected
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

fltNewCfgExtendedAddPatternMatchGroup 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.18
The pattern match group to be added to the security filter. A zero is returned when read.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

fltNewCfgExtendedRemPatternMatchGroup 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.19
The pattern match group to be to be removed from the security filter. A zero is returned when read.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

fltNewCfgExtended8021pBitsValue 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.20
The 802.1p bits value to match.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..7  

fltNewCfgExtended8021pBitsMatch 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.21
Enable or disable matching on 802.1p bits in the packets.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgExtendedAclIpLength 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.22
Set the IP maximum packet length in bytes. A value can be either 0 which indicates 'any' length or between 64 and 65535.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

fltNewCfgExtendedIdsGroup 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.23
The real server group for IDS load balancing. A value of 0 indicates 'none'.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

fltNewCfgExtendedEgressPip 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.24
Enable or disable pip selection based on egress port/vlan.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgExtendedDbind 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.25
Enable or disable filter delayed binding.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgExtendedRevBwmContract 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.26
Filt reverse session BWM contract number.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

fltNewCfgExtendedReverse 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.27
Enable or disable creating session for reverse side traffic.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgExtendedParseChn 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.28
Enable or disable chained pgroup match criteria for l7 filtering.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgExtendedRtpBwmContract 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.29
BWM contract for SIP RTP traffic.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

fltNewCfgExtendedSipParsing 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.30
Enable or disable SIP NAT.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgExtendedSessionMirror 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.31
Enable or disable session mirroring.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgExtendedIpVer 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.32
The type of IP address.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2)  

fltNewCfgExtendedIpv6Sip 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.33
The source IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..40)  

fltNewCfgExtendedIpv6Sprefix 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.34
The prefix length associated with source IP address .
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..128  

fltNewCfgExtendedIpv6Dip 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.35
The destination IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..40)  

fltNewCfgExtendedIpv6Dprefix 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.36
The prefix length associated with destination IP address .
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..128  

fltNewCfgExtendedHdrHash 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.37
The header hash filter.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(1), headerhash(2)  

fltNewCfgExtendedHdrName 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.38
The header name of the filter. Headerhash should be enabled before header name is configured.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..31)  

fltNewCfgExtendedHdrHashLen 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.39
The header hash length of the filter. Headerhash should be enabled before hash length is configured.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..255  

fltNewCfgExtendedNatIp 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.40
The nat IP address to be filtered.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

fltNewCfgExtendedIpv6Nip 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.41
The nat IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

fltNewCfgExtendedIpv6Proxy 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.42
The proxy IPv6 address to be filtered. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

fltNewCfgExtendedL7SipFilt 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.43
Enable/Disable L7 application SIP UDP filtering.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgExtendedNatMcastVlan 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.44
Multicast VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..4090  

fltNewCfgExtendedNbind 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.45
Enable or disable subnet binding for redirection.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgExtendedL3State 1.3.6.1.4.1.1872.2.5.4.1.2.12.1.46
The L3 filter processing state for this filter.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgPortTable 1.3.6.1.4.1.1872.2.5.4.1.2.4
The filtering port table in the current configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FltCurCfgPortTableEntry

fltCurCfgPortTableEntry 1.3.6.1.4.1.1872.2.5.4.1.2.4.1
A row in the filtering port table.
Status: current Access: not-accessible
OBJECT-TYPE    
  FltCurCfgPortTableEntry  

fltCurCfgPortIndx 1.3.6.1.4.1.1872.2.5.4.1.2.4.1.1
The port index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

fltCurCfgPortState 1.3.6.1.4.1.1872.2.5.4.1.2.4.1.2
Enable or disable filtering.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltCurCfgPortFiltBmap 1.3.6.1.4.1.1872.2.5.4.1.2.4.1.3
The filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ filter 9 || || || ||___ filter 8 || |____ filter 7 || . . . ||_________ filter 2 |__________ filter 1 (as index to fltCurCfgTable) where x : 1 - The represented filter rule applied to the port 0 - The represented filter rule not applied to the port
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

fltNewCfgPortTable 1.3.6.1.4.1.1872.2.5.4.1.2.5
The filtering port table in the new configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FltNewCfgPortTableEntry

fltNewCfgPortTableEntry 1.3.6.1.4.1.1872.2.5.4.1.2.5.1
A row in the filtering port table.
Status: current Access: not-accessible
OBJECT-TYPE    
  FltNewCfgPortTableEntry  

fltNewCfgPortIndx 1.3.6.1.4.1.1872.2.5.4.1.2.5.1.1
The port index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

fltNewCfgPortState 1.3.6.1.4.1.1872.2.5.4.1.2.5.1.2
Enable or disable filtering.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fltNewCfgPortFiltBmap 1.3.6.1.4.1.1872.2.5.4.1.2.5.1.3
The filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ filter 9 || || || ||___ filter 8 || |____ filter 7 || . . . ||_________ filter 2 |__________ filter 1 (as index to fltNewCfgTable) where x : 1 - The represented filter rule applied to the port 0 - The represented filter rule not applied to the port
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

fltNewCfgPortAddFiltRule 1.3.6.1.4.1.1872.2.5.4.1.2.5.1.4
This is an action object to add filtering rule to a port. The value specified with this object is the index to the fltNewCfgTable for which filtering rule to be added to the port. The range of the valid index is between 1 and fltCurCfgTableMaxSize. When read, the value '0' is returned always.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

fltNewCfgPortRemFiltRule 1.3.6.1.4.1.1872.2.5.4.1.2.5.1.5
This is an action object to remove filtering rule from a port. The value specified with this object is the index to the fltNewCfgTable for which filtering rule to be removed from the port. The range of the valid index is between 1 and fltCurCfgTableMaxSize. When read, the value '0' is returned always.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

fltUrlBwmTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.2.6
The maximum number of URL based BWM entries.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

fltCurCfgUrlBwmTable 1.3.6.1.4.1.1872.2.5.4.1.2.7
The table of URL based BWM for filtering.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FltCurCfgUrlBwmEntry

fltCurCfgUrlBwmEntry 1.3.6.1.4.1.1872.2.5.4.1.2.7.1
A row in the URL based BWM filtering table.
Status: current Access: not-accessible
OBJECT-TYPE    
  FltCurCfgUrlBwmEntry  

fltCurCfgUrlBwmFltIndex 1.3.6.1.4.1.1872.2.5.4.1.2.7.1.1
The number of the filter.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

fltCurCfgUrlBwmUrlId 1.3.6.1.4.1.1872.2.5.4.1.2.7.1.2
The URL Path Identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

fltCurCfgUrlBwmContract 1.3.6.1.4.1.1872.2.5.4.1.2.7.1.3
The BW contract.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

fltCurCfgUrlReverseBwmContract 1.3.6.1.4.1.1872.2.5.4.1.2.7.1.4
The BWM contract for reverse traffic.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

fltNewCfgUrlBwmTable 1.3.6.1.4.1.1872.2.5.4.1.2.8
The table of URL based BWM for filtering.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FltNewCfgUrlBwmEntry

fltNewCfgUrlBwmEntry 1.3.6.1.4.1.1872.2.5.4.1.2.8.1
A row in the URL based BWM filtering table.
Status: current Access: not-accessible
OBJECT-TYPE    
  FltNewCfgUrlBwmEntry  

fltNewCfgUrlBwmFltIndex 1.3.6.1.4.1.1872.2.5.4.1.2.8.1.1
The number of the filter.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

fltNewCfgUrlBwmUrlId 1.3.6.1.4.1.1872.2.5.4.1.2.8.1.2
The URL Path Identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

fltNewCfgUrlBwmContract 1.3.6.1.4.1.1872.2.5.4.1.2.8.1.3
The BW traffic contract.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

fltNewCfgUrlBwmDelete 1.3.6.1.4.1.1872.2.5.4.1.2.8.1.4
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

fltNewCfgUrlReverseBwmContract 1.3.6.1.4.1.1872.2.5.4.1.2.8.1.5
The BWM contract for reverse traffic.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

fltCfgHttpRedirMappingTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.2.9
The maximum number of entries in HttpRedirMappingTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

fltCurCfgHttpRedirMappingTable 1.3.6.1.4.1.1872.2.5.4.1.2.10
The table of HTTP redirection mapping table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FltCurCfgHttpRedirMappingEntry

fltCurCfgHttpRedirMappingEntry 1.3.6.1.4.1.1872.2.5.4.1.2.10.1
A row in the HTTP redirect mapping table.
Status: current Access: not-accessible
OBJECT-TYPE    
  FltCurCfgHttpRedirMappingEntry  

fltCurCfgHttpRedirMappingFilter 1.3.6.1.4.1.1872.2.5.4.1.2.10.1.1
The filter number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

fltCurCfgHttpRedirMappingFromStr 1.3.6.1.4.1.1872.2.5.4.1.2.10.1.2
This index is the string ID of Layer7 string table. If HTTP request matches this string, then switch issues a HTTP REDIRECT to client with the fltCurCfgHttpRedirMappingToStr string.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..1024  

fltCurCfgHttpRedirMappingToStr 1.3.6.1.4.1.1872.2.5.4.1.2.10.1.3
The string ID of Layer7 string table. The switch sends HTTP Redirect back to client with this string when HTTP request matches the fltCurCfgHttpRedirMappingFromStr string
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 2..1024  

fltNewCfgHttpRedirMappingTable 1.3.6.1.4.1.1872.2.5.4.1.2.11
The table of HTTP redirection mapping table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FltNewCfgHttpRedirMappingEntry

fltNewCfgHttpRedirMappingEntry 1.3.6.1.4.1.1872.2.5.4.1.2.11.1
A row in the HTTP redirect mapping table.
Status: current Access: not-accessible
OBJECT-TYPE    
  FltNewCfgHttpRedirMappingEntry  

fltNewCfgHttpRedirMappingFilter 1.3.6.1.4.1.1872.2.5.4.1.2.11.1.1
The filter number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

fltNewCfgHttpRedirMappingFromStr 1.3.6.1.4.1.1872.2.5.4.1.2.11.1.2
The string ID of Layer7 string table. If HTTP request matches this string then switch issues a HTTP REDIRECT to client with the fltNewCfgHttpRedirMappingToStr string.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..1024  

fltNewCfgHttpRedirMappingToStr 1.3.6.1.4.1.1872.2.5.4.1.2.11.1.4
The string ID of Layer7 string table. The switch sends HTTP Redirect back to client with this string when the HTTP request matches fltNewCfgHttpRedirMappingFromStr string.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 2..1024  

fltNewCfgHttpRedirMappingDelete 1.3.6.1.4.1.1872.2.5.4.1.2.11.1.6
By setting the value to delete(2), the entire row is deleted.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

gslbCurCfgGenState 1.3.6.1.4.1.1872.2.5.4.1.3.1.1
Turn on or off Distributed Server Load Balance.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

gslbNewCfgGenState 1.3.6.1.4.1.1872.2.5.4.1.3.1.2
Turn on or off Distributed Server Load Balance.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

gslbCurCfgGenHttpRedirect 1.3.6.1.4.1.1872.2.5.4.1.3.1.7
Enable/Disable HTTP redirect based GSLB in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

gslbNewCfgGenHttpRedirect 1.3.6.1.4.1.1872.2.5.4.1.3.1.8
Enable/Disable HTTP redirect based GSLB in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

gslbCurCfgGenMinco 1.3.6.1.4.1.1872.2.5.4.1.3.1.13
Minmum number of site connections in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

gslbNewCfgGenMinco 1.3.6.1.4.1.1872.2.5.4.1.3.1.14
Minmum number of site connections in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

gslbCurCfgGenUsern 1.3.6.1.4.1.1872.2.5.4.1.3.1.17
Enable/Disable HTTP redirect to real server name.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

gslbNewCfgGenUsern 1.3.6.1.4.1.1872.2.5.4.1.3.1.18
Enable/Disable HTTP redirect to real server name.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

gslbCurCfgGenNoremote 1.3.6.1.4.1.1872.2.5.4.1.3.1.25
Enable/Disable no remote real SLB. Enabling will prevent the switch from load balancing incoming traffic to remote reals in the event that all local reals are down.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

gslbNewCfgGenNoremote 1.3.6.1.4.1.1872.2.5.4.1.3.1.26
Enable/Disable no remote real SLB. Enabling will prevent the switch from load balancing incoming traffic to remote reals in the event that all local reals are down.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

gslbCurCfgGenEncrypt 1.3.6.1.4.1.1872.2.5.4.1.3.1.27
Enable/Disable encrypting remote site update.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

gslbNewCfgGenEncrypt 1.3.6.1.4.1.1872.2.5.4.1.3.1.28
Enable/Disable encrypting remote site update.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

gslbCurCfgGenRemSiteUpdatePort 1.3.6.1.4.1.1872.2.5.4.1.3.1.29
TCP port number for remote site updates in the current configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

gslbNewCfgGenRemSiteUpdatePort 1.3.6.1.4.1.1872.2.5.4.1.3.1.30
TCP port number for remote site updates in the new configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

gslbCurCfgGenSessUtilCap 1.3.6.1.4.1.1872.2.5.4.1.3.1.31
Session utilization capacity threshold in the current configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..100  

gslbNewCfgGenSessUtilCap 1.3.6.1.4.1.1872.2.5.4.1.3.1.32
Session utilization capacity threshold in the new configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..100  

gslbCurCfgGenCpuUtilCap 1.3.6.1.4.1.1872.2.5.4.1.3.1.33
CPU utilization capacity threshold in the current configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..100  

gslbNewCfgGenCpuUtilCap 1.3.6.1.4.1.1872.2.5.4.1.3.1.34
CPU utilization capacity threshold in the new configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..100  

gslbCurCfgGenSourceIpNetmask 1.3.6.1.4.1.1872.2.5.4.1.3.1.35
Source IP netmask for DNS persistence cache in the current configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

gslbNewCfgGenSourceIpNetmask 1.3.6.1.4.1.1872.2.5.4.1.3.1.36
Source IP netmask for DNS persistence cache in the new configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

gslbCurCfgGenTimeout 1.3.6.1.4.1.1872.2.5.4.1.3.1.37
Timeout in minutes for DNS persistence cache in the current configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..1440  

gslbNewCfgGenTimeout 1.3.6.1.4.1.1872.2.5.4.1.3.1.38
Timeout in minutes for DNS persistence cache in the new configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..1440  

gslbCurCfgGenDnsDirect 1.3.6.1.4.1.1872.2.5.4.1.3.1.39
Enable/Disable authoritative DNS direct based Global SLB in the current configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

gslbNewCfgGenDnsDirect 1.3.6.1.4.1.1872.2.5.4.1.3.1.40
Enable/Disable authoritative DNS direct based Global SLB in the new configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

gslbCurCfgGenRemSiteUpdateVersion 1.3.6.1.4.1.1872.2.5.4.1.3.1.41
DSSP version 1,2,3,4 or 5 to send out remote site updates in the current configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..5  

gslbNewCfgGenRemSiteUpdateVersion 1.3.6.1.4.1.1872.2.5.4.1.3.1.42
DSSP version 1,2,3,4 or 5 to send out remote site updates in the new configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..5  

gslbCurCfgGenHostname 1.3.6.1.4.1.1872.2.5.4.1.3.1.43
Enable/Disable virtual service hostname matching in the current configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

gslbNewCfgGenHostname 1.3.6.1.4.1.1872.2.5.4.1.3.1.44
Enable/Disable virtual service hostname matching in the new configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

gslbCurCfgGenRemSiteUpdateIntervalSeconds 1.3.6.1.4.1.1872.2.5.4.1.3.1.45
The time interval in seconds for updating remote site status in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 10..7200  

gslbNewCfgGenRemSiteUpdateIntervalSeconds 1.3.6.1.4.1.1872.2.5.4.1.3.1.46
The time interval in seconds for updating remote site status in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 10..7200  

gslbCurCfgGenNoResp 1.3.6.1.4.1.1872.2.5.4.1.3.1.47
DNS response code when no server is returned for the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..5  

gslbNewCfgGenNoResp 1.3.6.1.4.1.1872.2.5.4.1.3.1.48
DNS response code when no server is returned for the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..5  

gslbCurCfgProximityTime 1.3.6.1.4.1.1872.2.5.4.1.3.1.49
Current_configuration block maximum time allowed for Client Proximity calculation.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..24  

gslbNewCfgProximityTime 1.3.6.1.4.1.1872.2.5.4.1.3.1.50
New_configuration block maximum time allowed for Client Proximity calculation.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..24  

gslbCurCfgProximityMask 1.3.6.1.4.1.1872.2.5.4.1.3.1.51
Client Proximity default netmask of the client cache for the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 8..24  

gslbNewCfgProximityMask 1.3.6.1.4.1.1872.2.5.4.1.3.1.52
Client Proximity default netmask of the client cache for the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 8..24  

gslbCurCfgProximityAge 1.3.6.1.4.1.1872.2.5.4.1.3.1.53
Client Proximity Age timeout of each client network entries for the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..10080  

gslbNewCfgProximityAge 1.3.6.1.4.1.1872.2.5.4.1.3.1.54
Client Proximity Age timeout of each client network entries for the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..10080  

gslbCurCfgGenSourceIpv6Prefix 1.3.6.1.4.1.1872.2.5.4.1.3.1.55
Source IPv6 prefix for DNS persistence cache in the current configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..128  

gslbNewCfgGenSourceIpv6Prefix 1.3.6.1.4.1.1872.2.5.4.1.3.1.56
Source IPv6 prefix for DNS persistence cache in the new configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..128  

gslbRemSiteTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.3.2.1
The maximum number of GSLB remote sites.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbCurCfgRemSiteTable 1.3.6.1.4.1.1872.2.5.4.1.3.2.2
The GSLB remote site table in the current configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GslbCurCfgRemSiteTableEntry

gslbCurCfgRemSiteTableEntry 1.3.6.1.4.1.1872.2.5.4.1.3.2.2.1
A row in the GSLB remote site table.
Status: current Access: not-accessible
OBJECT-TYPE    
  GslbCurCfgRemSiteTableEntry  

gslbCurCfgRemSiteIndx 1.3.6.1.4.1.1872.2.5.4.1.3.2.2.1.1
The GSLB remote site table index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbCurCfgRemSitePrimaryIp 1.3.6.1.4.1.1872.2.5.4.1.3.2.2.1.2
The primary IP address of the remote site in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

gslbCurCfgRemSiteSecondaryIp 1.3.6.1.4.1.1872.2.5.4.1.3.2.2.1.3
The secondary IP address of the remote site in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

gslbCurCfgRemSiteState 1.3.6.1.4.1.1872.2.5.4.1.3.2.2.1.4
Enable/Disable GSLB for the remote site in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

gslbCurCfgRemSiteUpdate 1.3.6.1.4.1.1872.2.5.4.1.3.2.2.1.5
Enable/Disable GSLB for the remote site status update in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

gslbCurCfgRemSiteName 1.3.6.1.4.1.1872.2.5.4.1.3.2.2.1.6
The name of the GSLB remote site.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

gslbCurCfgRemSitePrimaryIPVer 1.3.6.1.4.1.1872.2.5.4.1.3.2.2.1.8
The primary IP address version of the remote site.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2)  

gslbCurCfgRemSitePrimaryIp6 1.3.6.1.4.1.1872.2.5.4.1.3.2.2.1.9
Primary IPV6 address of the remote site Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

gslbCurCfgRemSiteSecondaryIPVer 1.3.6.1.4.1.1872.2.5.4.1.3.2.2.1.10
The secondary IP address version of the remote site.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2)  

gslbCurCfgRemSiteSecondaryIp6 1.3.6.1.4.1.1872.2.5.4.1.3.2.2.1.11
Secondary IPV6 address of the remote site Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

gslbNewCfgRemSiteTable 1.3.6.1.4.1.1872.2.5.4.1.3.2.3
The GSLB remote site table in the current configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GslbNewCfgRemSiteTableEntry

gslbNewCfgRemSiteTableEntry 1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1
A row in the GSLB remote site table in the current configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  GslbNewCfgRemSiteTableEntry  

gslbNewCfgRemSiteIndx 1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1.1
The GSLB remote site table index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbNewCfgRemSitePrimaryIp 1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1.2
The primary IP address of the remote site in the new_configuration block.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

gslbNewCfgRemSiteSecondaryIp 1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1.3
The secondary IP address of the remote site in the new_configuration block.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

gslbNewCfgRemSiteState 1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1.4
Enable/Disable GSLB for the remote site in the new_configuration block.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

gslbNewCfgRemSiteUpdate 1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1.5
Enable/Disable GSLB for the remote site status update in the new_configuration block.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

gslbNewCfgRemSiteDelete 1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1.6
By setting the value to delete(2), the entire row is deleted.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

gslbNewCfgRemSiteName 1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1.7
The name of the GSLB remote site.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..31)  

gslbNewCfgRemSitePrimaryIPVer 1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1.9
The primary IP address version of the remote site.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2)  

gslbNewCfgRemSitePrimaryIp6 1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1.10
Primary IPV6 address of the remote site Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..40)  

gslbNewCfgRemSiteSecondaryIPVer 1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1.11
The secondary IP address version of the remote site.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2)  

gslbNewCfgRemSiteSecondaryIp6 1.3.6.1.4.1.1872.2.5.4.1.3.2.3.1.12
Secondary IPV6 address of the remote site Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..40)  

gslbEnhNetworkTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.3.4.1
The maximum number of Global SLB networks.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbCurCfgEnhNetworkTable 1.3.6.1.4.1.1872.2.5.4.1.3.4.2
The table of network preference in the current_config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GslbCurCfgEnhNetworkTableEntry

gslbCurCfgEnhNetworkTableEntry 1.3.6.1.4.1.1872.2.5.4.1.3.4.2.1
The table about a network preference entry configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  GslbCurCfgEnhNetworkTableEntry  

gslbCurCfgEnhNetworkIndx 1.3.6.1.4.1.1872.2.5.4.1.3.4.2.1.1
The current network preference table index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbCurCfgEnhNetworkState 1.3.6.1.4.1.1872.2.5.4.1.3.4.2.1.2
Enable/Disable Global SLB for the network in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

gslbCurCfgEnhNetworkSourceIp 1.3.6.1.4.1.1872.2.5.4.1.3.4.2.1.3
The Source IP address of the network preference table.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

gslbCurCfgEnhNetworkNetMask 1.3.6.1.4.1.1872.2.5.4.1.3.4.2.1.4
The Net mask of the network preference table.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

gslbCurCfgEnhNetworkVirtServer 1.3.6.1.4.1.1872.2.5.4.1.3.4.2.1.5
The virtual servers in the network. The virtual servers are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | || |_ server 9 | || | ||___ server 8 | |____ server 7 | . . . |__________ server 1 where x : 1 - The represented virtual server belongs to the network 0 - The represented virtual server does not belong to the network
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

gslbCurCfgEnhNetworkRemRealServer 1.3.6.1.4.1.1872.2.5.4.1.3.4.2.1.6
The remote real servers in the network. The remote real servers are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | || |_ server 9 | || | ||___ server 8 | |____ server 7 | . . . |__________ server 1 where x : 1 - The represented remote real server belongs to the network 0 - The represented remote real server does not belong to the network
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

gslbCurCfgEnhNetworkSourceIpV6 1.3.6.1.4.1.1872.2.5.4.1.3.4.2.1.7
The Source IPV6 address of the network table Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

gslbCurCfgEnhNetworkVer 1.3.6.1.4.1.1872.2.5.4.1.3.4.2.1.8
The secondary IP address version of the remote site.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2)  

gslbCurCfgEnhNetworkSprefix 1.3.6.1.4.1.1872.2.5.4.1.3.4.2.1.9
The prefix length associated with the source IPV6 address of the network table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..128  

gslbNewCfgEnhNetworkTable 1.3.6.1.4.1.1872.2.5.4.1.3.4.3
The table of network preference in the new_config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GslbNewCfgEnhNetworkTableEntry

gslbNewCfgEnhNetworkTableEntry 1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1
The table about a network preference entry configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  GslbNewCfgEnhNetworkTableEntry  

gslbNewCfgEnhNetworkIndx 1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.1
The new network preference table index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbNewCfgEnhNetworkState 1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.2
Enable/Disable Global SLB for the network in the new_configuration block.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

gslbNewCfgEnhNetworkSourceIp 1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.3
The Source IP address of the network table.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

gslbNewCfgEnhNetworkNetMask 1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.4
The Net mask of the network preference table.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

gslbNewCfgEnhNetworkDelete 1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.5
By setting the value to delete(2), the entire row is deleted.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

gslbNewCfgEnhNetworkVirtServer 1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.6
The virtual servers in the network. The virtual servers are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | || |_ server 9 | || | ||___ server 8 | |____ server 7 | . . . |__________ server 1 where x : 1 - The represented virtual server belongs to the network 0 - The represented virtual server does not belong to the network
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

gslbNewCfgEnhNetworkRemRealServer 1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.7
The remote real servers in the network. The remote real servers are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | || |_ server 9 | || | ||___ server 8 | |____ server 7 | . . . |__________ server 1 where x : 1 - The represented remote real server belongs to the network 0 - The represented remote real server does not belong to the network
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

gslbNewCfgEnhNetworkAddVirtServer 1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.8
The virtual server to be added to the network. When read, 0 is returned.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

gslbNewCfgEnhNetworkRemoveVirtServer 1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.9
The virtual server to be removed from the network. When read, 0 is returned.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

gslbNewCfgEnhNetworkAddRemRealServer 1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.10
The remote real server to be added to the network. When read, 0 is returned.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

gslbNewCfgEnhNetworkRemoveRemRealServer 1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.11
The remote real server to be removed from the network. When read, 0 is returned.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

gslbNewCfgEnhNetworkSourceIpV6 1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.12
The Source IPV6 address of the network table Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..40)  

gslbNewCfgEnhNetworkVer 1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.13
The secondary IP address version of the remote site.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2)  

gslbNewCfgEnhNetworkSprefix 1.3.6.1.4.1.1872.2.5.4.1.3.4.3.1.14
The prefix length associated with the source IPV6 address of the network table.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..128  

gslbRuleTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.3.5.1
The maximum number of Global SLB rules.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbCurCfgRuleTable 1.3.6.1.4.1.1872.2.5.4.1.3.5.2
The rule table in the current configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GslbCurCfgRuleTableEntry

gslbCurCfgRuleTableEntry 1.3.6.1.4.1.1872.2.5.4.1.3.5.2.1
An entry in the rule table in the current configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  GslbCurCfgRuleTableEntry  

gslbCurCfgRuleIndx 1.3.6.1.4.1.1872.2.5.4.1.3.5.2.1.1
The rule table index in the current configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbCurCfgRuleState 1.3.6.1.4.1.1872.2.5.4.1.3.5.2.1.2
Enable/Disable the rule in the current configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

gslbCurCfgRuleStartHour 1.3.6.1.4.1.1872.2.5.4.1.3.5.2.1.3
Start hour in 24-hour format for the rule in the current configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..23  

gslbCurCfgRuleStartMin 1.3.6.1.4.1.1872.2.5.4.1.3.5.2.1.4
Start minutes for the rule in the current configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..59  

gslbCurCfgRuleEndHour 1.3.6.1.4.1.1872.2.5.4.1.3.5.2.1.5
End hour in 24-hour format for the rule in the current configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..23  

gslbCurCfgRuleEndMin 1.3.6.1.4.1.1872.2.5.4.1.3.5.2.1.6
End minutes for the rule in the current configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..59  

gslbCurCfgRuleTTL 1.3.6.1.4.1.1872.2.5.4.1.3.5.2.1.7
Time to live in seconds of DNS resource records for the rule in the current configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

gslbCurCfgRuleRR 1.3.6.1.4.1.1872.2.5.4.1.3.5.2.1.8
DNS resource records in DNS response for the rule in the current configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..10  

gslbCurCfgRuleDname 1.3.6.1.4.1.1872.2.5.4.1.3.5.2.1.9
Network preference domain name for rule.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

gslbNewCfgRuleTable 1.3.6.1.4.1.1872.2.5.4.1.3.5.3
The rule table in the new configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GslbNewCfgRuleTableEntry

gslbNewCfgRuleTableEntry 1.3.6.1.4.1.1872.2.5.4.1.3.5.3.1
An entry in the rule table in the new configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  GslbNewCfgRuleTableEntry  

gslbNewCfgRuleIndx 1.3.6.1.4.1.1872.2.5.4.1.3.5.3.1.1
The rule table index in the new configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbNewCfgRuleState 1.3.6.1.4.1.1872.2.5.4.1.3.5.3.1.2
Enable/Disable the rule in the new configuration block.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

gslbNewCfgRuleStartHour 1.3.6.1.4.1.1872.2.5.4.1.3.5.3.1.3
Start hour in 24-hour format for the rule in the new configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..23  

gslbNewCfgRuleStartMin 1.3.6.1.4.1.1872.2.5.4.1.3.5.3.1.4
Start minutes for the rule in the new configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..59  

gslbNewCfgRuleEndHour 1.3.6.1.4.1.1872.2.5.4.1.3.5.3.1.5
End hour in 24-hour format for the rule in the new configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..23  

gslbNewCfgRuleEndMin 1.3.6.1.4.1.1872.2.5.4.1.3.5.3.1.6
End minutes for the rule in the new configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..59  

gslbNewCfgRuleTTL 1.3.6.1.4.1.1872.2.5.4.1.3.5.3.1.7
Time to live in seconds of DNS resource records for the rule in the new configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

gslbNewCfgRuleRR 1.3.6.1.4.1.1872.2.5.4.1.3.5.3.1.8
DNS resource records in DNS response for the rule in the new configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

gslbNewCfgRuleDname 1.3.6.1.4.1.1872.2.5.4.1.3.5.3.1.10
Network preference domain name for rule
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

gslbNewCfgRuleDelete 1.3.6.1.4.1.1872.2.5.4.1.3.5.3.1.9
By setting the value to delete(2), the entire row is deleted.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

gslbMetricTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.3.5.4
The maximum number of Global SLB metrics for each Global SLB rule.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbCurCfgMetricTable 1.3.6.1.4.1.1872.2.5.4.1.3.5.5
The metric table in the current configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GslbCurCfgMetricTableEntry

gslbCurCfgMetricTableEntry 1.3.6.1.4.1.1872.2.5.4.1.3.5.5.1
An entry in the metric table in the current configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  GslbCurCfgMetricTableEntry  

gslbCurCfgRuleMetricIndx 1.3.6.1.4.1.1872.2.5.4.1.3.5.5.1.1
The rule table index in the current configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbCurCfgMetricIndx 1.3.6.1.4.1.1872.2.5.4.1.3.5.5.1.2
The metric table index in the current configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbCurCfgMetricMetric 1.3.6.1.4.1.1872.2.5.4.1.3.5.5.1.3
The metric to use to select next server in the current configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER leastconns(1), roundrobin(2), response(3), geographical(4), network(5), random(6), availability(7), qos(8), minmisses(9), hash(10), local(11), always(12), remote(13), none(14), persistence(15)  

gslbCurCfgMetricNetworkBmap 1.3.6.1.4.1.1872.2.5.4.1.3.5.5.1.4
The networks added to the metric. The networks added are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ network 9 || || || ||___ network 8 || |____ network 7 || . . . ||_________ network 2 |__________ network 1 where x : 1 - The represented network added to the metric 0 - The represented network added to the metric
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

gslbNewCfgMetricTable 1.3.6.1.4.1.1872.2.5.4.1.3.5.6
The metric table in the current configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GslbNewCfgMetricTableEntry

gslbNewCfgMetricTableEntry 1.3.6.1.4.1.1872.2.5.4.1.3.5.6.1
An entry in the metric table in the current configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  GslbNewCfgMetricTableEntry  

gslbNewCfgRuleMetricIndx 1.3.6.1.4.1.1872.2.5.4.1.3.5.6.1.1
The rule table index in the new configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbNewCfgMetricIndx 1.3.6.1.4.1.1872.2.5.4.1.3.5.6.1.2
The metric table index in the new configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbNewCfgMetricMetric 1.3.6.1.4.1.1872.2.5.4.1.3.5.6.1.3
The metric to use to select next server in the new configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER leastconns(1), roundrobin(2), response(3), geographical(4), network(5), random(6), availability(7), qos(8), minmisses(9), hash(10), local(11), always(12), remote(13), none(14), persistence(15)  

gslbNewCfgMetricNetworkBmap 1.3.6.1.4.1.1872.2.5.4.1.3.5.6.1.4
The networks added to the metric. The networks added are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ network 9 || || || ||___ network 8 || |____ network 7 || . . . ||_________ network 2 |__________ network 1 where x : 1 - The represented network added to the metric 0 - The represented network added to the metric
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

gslbNewCfgMetricAddNetwork 1.3.6.1.4.1.1872.2.5.4.1.3.5.6.1.5
This is an action object to add network to a metric. The range of the valid index is between 1 and gslbEnhNetworkTableMaxSize. When read, the value '0' is returned always.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

gslbNewCfgMetricRemNetwork 1.3.6.1.4.1.1872.2.5.4.1.3.5.6.1.6
This is an action object to remove network to a metric. The range of the valid index is between 1 and gslbEnhNetworkTableMaxSize. When read, the value '0' is returned always.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

gslbCurCfgDnsSecGlobalEnabled 1.3.6.1.4.1.1872.2.5.4.1.3.6.1.1
.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

gslbNewCfgDnsSecGlobalEnabled 1.3.6.1.4.1.1872.2.5.4.1.3.6.1.2
.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

gslbCurCfgDnsSecGlobalRollTm 1.3.6.1.4.1.1872.2.5.4.1.3.6.1.3
Automatic Roll Over Timer - In Hours.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..168  

gslbNewCfgDnsSecGlobalRollTm 1.3.6.1.4.1.1872.2.5.4.1.3.6.1.4
Automatic Roll Over Timer - In Hours.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..168  

gslbCurCfgDnsSecGlobalType 1.3.6.1.4.1.1872.2.5.4.1.3.6.1.5
Automatic Roll Over Timer - In Hours.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER nsec(1), nsec3(2)  

gslbNewCfgDnsSecGlobalType 1.3.6.1.4.1.1872.2.5.4.1.3.6.1.6
Automatic Roll Over Timer - In Hours.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER nsec(1), nsec3(2)  

gslbCurCfgDnsSecGlobalKskRollTm 1.3.6.1.4.1.1872.2.5.4.1.3.6.1.9
Automatic KSK Roll Over Timer - In Hours.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..168  

gslbNewCfgDnsSecGlobalKskRollTm 1.3.6.1.4.1.1872.2.5.4.1.3.6.1.10
Automatic KSK Roll Over Timer - In Hours.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..168  

gslbCurCfgDnsSecGlobalNsec3SaltLen 1.3.6.1.4.1.1872.2.5.4.1.3.6.1.11
NSEC3 Salt Length in bytes.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

gslbNewCfgDnsSecGlobalNsec3SaltLen 1.3.6.1.4.1.1872.2.5.4.1.3.6.1.12
NSEC3 Salt Length in bytes.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

gslbCurCfgDnsSecGlobalNsec3SaltLifetime 1.3.6.1.4.1.1872.2.5.4.1.3.6.1.13
NSEC3 Salt Lifetime in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 86400..2419200  

gslbNewCfgDnsSecGlobalNsec3SaltLifetime 1.3.6.1.4.1.1872.2.5.4.1.3.6.1.14
NSEC3 Salt Lifetime in seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 86400..2419200  

gslbCurCfgDnsSecGlobalNsec3HashIterations 1.3.6.1.4.1.1872.2.5.4.1.3.6.1.15
NSEC3 Salt Hash Iterations.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..500  

gslbNewCfgDnsSecGlobalNsec3HashIterations 1.3.6.1.4.1.1872.2.5.4.1.3.6.1.16
NSEC3 Salt Hash Iterations.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..500  

gslbCurCfgDnsSecGlobalSMPTServerUserName 1.3.6.1.4.1.1872.2.5.4.1.3.6.1.17
SMPT Server User Name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

gslbNewCfgDnsSecGlobalSMPTServerUserName 1.3.6.1.4.1.1872.2.5.4.1.3.6.1.18
SMPT Server User Name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

gslbCurDnsSecKeyTable 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GslbCurDnsSecKeyEntry

gslbCurDnsSecKeyEntry 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  GslbCurDnsSecKeyEntry  

gslbCurDnsSecKeyID 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1.1
DNS Sec Table Key.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

gslbCurDnsSecKeyUseCount 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1.2
Usage count.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65534  

gslbCurDnsSecKeyType 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1.3
KSK or ZSK.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER keyTypeKSK(1), keyTypeZSK(2), keyTypeInvalid(3)  

gslbCurDnsSecKeyStatus 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1.4
Key status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

gslbCurDnsSecKeySize 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1.5
Size of key (bits).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER keySize1024(1), keySize2048(2), keySize4096(3), keySizeInvalid(4)  

gslbCurDnsSecKeyAlgo 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1.6
Signing algorithm.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER keyAlgoRsaSha1(1), keyAlgoRsaSha256(2), keyAlgoRsaSha512(3)  

gslbCurDnsSecKeyTTL 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1.7
DNSSEC - TTL in Seconds.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..86400  

gslbCurDnsSecKeyExpPeriod 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1.8
Expiration period in Seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..ffffffff  

gslbCurDnsSecKeyRollOverPeriod 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1.9
RollOver period in Seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..ffffffff  

gslbCurDnsSecKeyValidityPeriod 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1.10
Signature validity period in Seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..ffffffff  

gslbCurDnsSecKeyPublicationPeriod 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.1.1.11
Signature publication period in Seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..ffffffff  

gslbNewDnsSecKeyTable 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GslbNewDnsSecKeyEntry

gslbNewDnsSecKeyEntry 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  GslbNewDnsSecKeyEntry  

gslbNewDnsSecKeyID 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.1
DNS Sec Table Key.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

gslbNewDnsSecKeyUseCount 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.2
Usage count.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65534  

gslbNewDnsSecKeyType 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.3
KSK or ZSK.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER keyTypeKSK(1), keyTypeZSK(2), keyTypeInvalid(3)  

gslbNewDnsSecKeyStatus 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.4
Key state.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

gslbNewDnsSecKeySize 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.5
Size of key (bits).
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER keySize1024(1), keySize2048(2), keySize4096(3), keySizeInvalid(4)  

gslbNewDnsSecKeyAlgo 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.6
Signing algorithm.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER keyAlgoRsaSha1(1), keyAlgoRsaSha256(2), keyAlgoRsaSha512(3)  

gslbNewDnsSecKeyTTL 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.7
DNSSEC - TTL.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..86400  

gslbNewDnsSecKeyExpPeriod 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.8
Expiration period in Seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..ffffffff  

gslbNewDnsSecKeyRollOverPeriod 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.9
RollOver period in Seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..ffffffff  

gslbNewDnsSecKeyValidityPeriod 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.10
Signature validity period in Seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..ffffffff  

gslbNewDnsSecKeyPublicationPeriod 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.11
Signature publication period in Seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..ffffffff  

gslbNewDnsSecKeyDelete 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.13
By setting the value to delete(2), the entire row is deleted.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

gslbNewDnsSecKeyGenerate 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.14
By setting the value to generate(2), the key will be generated.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), generate(2)  

gslbNewDnsSecKeyGenerateStatus 1.3.6.1.4.1.1872.2.5.4.1.3.6.2.2.1.15
Returns the generate status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notGenerated(1), generated(2), inProgress(3)  

gslbCurDnsSecZoneTable 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GslbCurDnsSecZoneEntry

gslbCurDnsSecZoneEntry 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  GslbCurDnsSecZoneEntry  

gslbCurDnsSecZoneID 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.1
Zone ID.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

gslbCurDnsSecZoneName 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.2
Zone name (virt's dname).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..65)  

gslbCurDnsSecZoneKSK1 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.3
KSK 1 of the zone.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

gslbCurDnsSecZoneKSK2 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.4
KSK 2 of the zone.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

gslbCurDnsSecZoneKSK3 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.5
KSK 3 of the zone.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

gslbCurDnsSecZoneZSK1 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.6
ZSK 1 of the zone.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

gslbCurDnsSecZoneZSK2 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.7
ZSK 2 of the zone.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

gslbCurDnsSecZoneZSK3 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.8
ZSK 1 of the zone.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

gslbCurDnsSecZoneStatus 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.9
Zone status - Enabled/Disabled.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

gslbCurDnsSecZoneParentIPVer 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.10
The type of IP address.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2)  

gslbCurDnsSecZoneParentIPv4 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.11
Parent IP.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

gslbCurDnsSecZoneParentIPv6 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.1.1.12
IPV6 address of the Parent IP Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

gslbNewDnsSecZoneTable 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GslbNewDnsSecZoneEntry

gslbNewDnsSecZoneEntry 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  GslbNewDnsSecZoneEntry  

gslbNewDnsSecZoneID 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.1
Zone ID.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

gslbNewDnsSecZoneName 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.2
Zone name (virt's dname).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..65)  

gslbNewDnsSecZoneKSK1 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.3
KSK 1 of the zone.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

gslbNewDnsSecZoneKSK2 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.4
KSK 2 of the zone.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

gslbNewDnsSecZoneKSK3 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.5
KSK 3 of the zone.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

gslbNewDnsSecZoneZSK1 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.6
ZSK 1 of the zone.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

gslbNewDnsSecZoneZSK2 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.7
ZSK 2 of the zone.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

gslbNewDnsSecZoneZSK3 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.8
ZSK 3 of the zone.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

gslbNewDnsSecZoneStatus 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.9
Zone status - Enabled/Disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

gslbNewDnsSecZoneParentIPVer 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.10
The type of IP address.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2)  

gslbNewDnsSecZoneParentIPv4 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.11
IPV4 address of the Parent IP.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

gslbNewDnsSecZoneParentIPv6 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.12
IPV6 address of the Parent IP Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

gslbNewDnsSecZoneDelete 1.3.6.1.4.1.1872.2.5.4.1.3.6.3.2.1.13
By setting the value to delete(2), the entire row is deleted.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

gslbDnsSecImportExportSCPHostName 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.1
SCP Server Host Name or Server IP Address.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

gslbDnsSecImportExportSCPFileName 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.2
SCP Server File name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

gslbDnsSecImportExportSCPUserName 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.3
SCP Server User Name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

gslbDnsSecImportExportSCPPassword 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.4
SCP Server Password.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

gslbDnsSecImportExportKeyID 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.5
DNSSEC Key ID.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

gslbDnsSecImportExportZoneID 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.6
DNSSEC Zone ID.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

gslbDnsSecImportExportPassphrase 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.7
Passphrase.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

gslbDnsSecImportExportComponentType 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.8
Component type to import/export: key, dnskey or ds record. Currently only the key is Supported
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), key(1), dnskey(2), dsrecord(3)  

gslbDnsSecImportExportPortType 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.9
The port type: management or data.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER data(0), mgmt(1)  

gslbDnsSecImportExportImpKeyType 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.10
KSK or ZSK.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER keyTypeKSK(1), keyTypeZSK(2)  

gslbDnsSecImportExportImpKeyStatus 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.11
Key status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

gslbDnsSecImportExportImpKeySize 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.12
Size of key (bits).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER keySize1024(1), keySize2048(2), keySize4096(3)  

gslbDnsSecImportExportImpKeyAlgo 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.13
Signing algorithm.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER keyAlgoRsaSha1(1), keyAlgoRsaSha256(2), keyAlgoRsaSha512(3)  

gslbDnsSecImportExportImpKeyTTL 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.14
DNSSEC - TTL in Seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..86400  

gslbDnsSecImportExportImpKeyExpPeriod 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.15
Expiration period in Seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..ffffffff  

gslbDnsSecImportExportImpKeyRollOverPeriod 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.16
RollOver period in Seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..ffffffff  

gslbDnsSecImportExportImpKeyValidityPeriod 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.17
Signature validity period in Seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..ffffffff  

gslbDnsSecImportExportImpKeyPublicationPeriod 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.18
Signature publication period in Seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..ffffffff  

gslbDnsSecImportExportAction 1.3.6.1.4.1.1872.2.5.4.1.3.6.4.19
Component type to import/export: key or dnskey.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), import(1), export(2)  

gslbCurDnsResVipTable 1.3.6.1.4.1.1872.2.5.4.1.3.7.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GslbCurDnsResVipEntry

gslbCurDnsResVipEntry 1.3.6.1.4.1.1872.2.5.4.1.3.7.1.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  GslbCurDnsResVipEntry  

gslbCurDnsResVipIndex1 1.3.6.1.4.1.1872.2.5.4.1.3.7.1.1.1
DNS Responder VIP Index 1.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..1024  

gslbCurDnsResVipIndex2 1.3.6.1.4.1.1872.2.5.4.1.3.7.1.1.2
DNS Responder VIP Index 2.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..1024  

gslbCurDnsResVipName 1.3.6.1.4.1.1872.2.5.4.1.3.7.1.1.3
DNS Responder VIP Name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

gslbCurDnsResVipIPVer 1.3.6.1.4.1.1872.2.5.4.1.3.7.1.1.4
The type of IP address of DNS Responder VIP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2)  

gslbCurDnsResVipV4 1.3.6.1.4.1.1872.2.5.4.1.3.7.1.1.5
IPV4 address of the DNS Responder VIP.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

gslbCurDnsResVipV6 1.3.6.1.4.1.1872.2.5.4.1.3.7.1.1.6
IPV6 address of the DNS Responder VIP Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

gslbCurDnsResVipStatus 1.3.6.1.4.1.1872.2.5.4.1.3.7.1.1.7
Zone status - Enabled/Disabled.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

gslbNewDnsResVipTable 1.3.6.1.4.1.1872.2.5.4.1.3.7.2
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GslbNewDnsResVipEntry

gslbNewDnsResVipEntry 1.3.6.1.4.1.1872.2.5.4.1.3.7.2.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  GslbNewDnsResVipEntry  

gslbNewDnsResVipIndex1 1.3.6.1.4.1.1872.2.5.4.1.3.7.2.1.1
DNS Responder VIP Index 1.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..1024  

gslbNewDnsResVipIndex2 1.3.6.1.4.1.1872.2.5.4.1.3.7.2.1.2
DNS Responder VIP Index 2.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..1024  

gslbNewDnsResVipName 1.3.6.1.4.1.1872.2.5.4.1.3.7.2.1.3
DNS Responder VIP Name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

gslbNewDnsResVipIPVer 1.3.6.1.4.1.1872.2.5.4.1.3.7.2.1.4
The type of IP address of DNS Responder VIP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2)  

gslbNewDnsResVipV4 1.3.6.1.4.1.1872.2.5.4.1.3.7.2.1.5
IPV4 address of the DNS Responder VIP.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

gslbNewDnsResVipV6 1.3.6.1.4.1.1872.2.5.4.1.3.7.2.1.6
IPV6 address of the DNS Responder VIP Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

gslbNewDnsResVipStatus 1.3.6.1.4.1.1872.2.5.4.1.3.7.2.1.7
Zone status - Enabled/Disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

gslbNewDnsResVipDelete 1.3.6.1.4.1.1872.2.5.4.1.3.7.2.1.8
By setting the value to delete(2), the entire row is deleted.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

gslbDnsResVipEmptyIndexesTable 1.3.6.1.4.1.1872.2.5.4.1.3.7.3
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GslbDnsResVipEmptyIndexesEntry

gslbDnsResVipEmptyIndexesEntry 1.3.6.1.4.1.1872.2.5.4.1.3.7.3.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  GslbDnsResVipEmptyIndexesEntry  

gslbDnsResVipEmptyIndexesIndex 1.3.6.1.4.1.1872.2.5.4.1.3.7.3.1.1
DNS Responder VIP Index.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..1024  

hcsTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.13.1
The maximum number of scriptable health check entries.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hcsCurCfgTable 1.3.6.1.4.1.1872.2.5.4.1.1.13.2
The scriptable health check table in the current configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HcsCurCfgTableEntry

hcsCurCfgTableEntry 1.3.6.1.4.1.1872.2.5.4.1.1.13.2.1
A row in the scriptable health check table.
Status: current Access: not-accessible
OBJECT-TYPE    
  HcsCurCfgTableEntry  

hcsCurCfgScriptIndex 1.3.6.1.4.1.1872.2.5.4.1.1.13.2.1.1
The index in the scriptable health check table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hcsCurCfgScriptString 1.3.6.1.4.1.1872.2.5.4.1.1.13.2.1.2
The scriptable health check string.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hcsNewCfgTable 1.3.6.1.4.1.1872.2.5.4.1.1.13.3
The scriptable health check table in the new configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HcsNewCfgTableEntry

hcsNewCfgTableEntry 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1
A row in the scriptable health check table.
Status: current Access: not-accessible
OBJECT-TYPE    
  HcsNewCfgTableEntry  

hcsNewCfgScriptIndex 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.1
The index the scriptable health check.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hcsNewCfgScriptString 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.2
The scriptable health check string.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hcsNewCfgAddSendCmd 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.4
Append an 'send' command to the script. The set value of this object should be the exact characters to be sent on the port opened with the 'open' command. The 'send ' characters will be automatically appended. Also a 'null terminator' () will be automatically appended. The null terminator and the 'send ' characters will be counted as characters in the script.
Status: obsolete Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..255)  

hcsNewCfgAddExpectCmd 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.5
Append an 'expect' command to the script. The set value of this object should be the exact characters expected to be received on the port opened with the 'open' command. The value could also be a single wildcard character '*' which means any received content will be accepted. The 'expect ' characters will be automatically appended. Also a 'null terminator'() will be automatically appended. The null terminator and the 'expect ' characters will be counted as characters in the script.
Status: obsolete Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..255)  

hcsNewCfgAddCloseCmd 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.6
Add close command to end of the script. When set to the value of 2 (add), 'close' will be appended to the script. Also, a 'null terminator'() will be automatically appended. The null terminator and the 'close' characters will be counted as characters in the script. This command is only valid for TCP.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), close(2)  

hcsNewCfgRemLastCmd 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.7
Remove the last command from the script. When set to the value of 2 (remove), last command will be removed from the script. When read, other(1) is returned.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), remove(2)  

hcsNewCfgDeleteScript 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.8
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

hcsNewCfgAddOffsetCmd 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.9
Append an 'offset' command to the script. The set value of this object should be the offset from the beginning of the data area of the TCP/UDP packet to start matching the string configured in the last bexpect command. The 'offset ' characters will be automatically appended. Also a 'null terminator'() will be automatically appended. The null terminator and the 'offset ' characters will be counted as characters in the script. When read, the return value has no significant meaning, but a 1 is always returned.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..1464  

hcsNewCfgAddWaitCmd 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.10
Append a 'wait' command to the script. The set value of this object should be the maximum waiting time for the packet containing the content configured in the last expect command. Wait time is in units of milliseconds, and the maximum supported is 65535 ms. The 'wait ' characters will be automatically appended. Also a 'null terminator'() will be automatically appended. The null terminator and the 'wait ' characters will be counted as characters in the script. When read, the return value has no significant meaning, but a 1 is always returned.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..65535  

hcsNewCfgAddOpenProtCmd 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.11
Append an 'open' command to the script. The value of this object should be real server port number or name, followed by a comma, and then the protocol (either tcp or udp), e.g. '80,tcp'. Only the port number or name, and tcp or udp should be set. The 'open ' characters will be automatically appended. Also a 'null terminator' () will be automatically appended. The null terminator and the 'open ' characters will be counted as characters in the script.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..31)  

hcsNewCfgAddNsendCmd 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.12
Append an 'nsend' command to the script. The 'nsend' command is used to append additional content to the packet generated by the 'bsend' command when the desired 'bsend' content is more than 255 characters. The set value of this object should be the exact characters to be appended. The 'nsend ' characters will be automatically appended. Also a 'null terminator' () will be automatically appended. The null terminator and the 'nsend ' characters will be counted as characters in the script.
Status: obsolete Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..255)  

hcsNewCfgAddNexpectCmd 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.13
Append an 'nexpect' command to the script. The 'nexpect' command is used to append additional characters to the 'bexpect' string when the desired 'bexpect' string is more than 255 characters. The set value of this object should be the exact characters to be appended. The 'nexpect ' characters will be automatically appended. Also a 'null terminator'() will be automatically appended. The null terminator and the 'nexpect ' characters will be counted as characters in the script.
Status: obsolete Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..255)  

hcsNewCfgAddDepthCmd 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.14
Append a 'depth' command to the script. The set value of this object should be the depth (search window) within the data area of the TCP/UDP packet for matching the string configured in the last bexpect command. The 'depth ' characters will be automatically appended. Also a 'null terminator'() will be automatically appended. The null terminator and the 'depth ' characters will be counted as characters in the script. When read, the return value has no significant meaning, but a 1 is always returned.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..1464  

hcsNewCfgAddLongBsendCmd 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.15
Append a 'bsend' command to the script. The set value of this object should be the exact binary data in hex format to be sent on the port opened with the 'open' command. The 'bsend ' characters will be automatically appended. Also a 'null terminator' () will be automatically appended. The null terminator and the 'bsend ' characters will be counted as characters in the script.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..506)  

hcsNewCfgAddLongBexpectCmd 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.16
Append a 'bexpect' command to the script. The set value of this object should be the exact binary data in hex format expected to be received on the port opened with the 'open' command. The value could also be a single wildcard character '*' which means any received content will be accepted. The 'bexpect ' characters will be automatically appended. Also a 'null terminator'() will be automatically appended. The null terminator and the 'bexpect ' characters will be counted as characters in the script.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..504)  

hcsNewCfgAddLongSendCmd 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.17
Append an 'send' command to the script. The set value of this object should be the exact characters to be sent on the port opened with the 'open' command. The 'send ' characters will be automatically appended. Also a 'null terminator' () will be automatically appended. The null terminator and the 'send ' characters will be counted as characters in the script.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..507)  

hcsNewCfgAddLongExpectCmd 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.18
Append an 'expect' command to the script. The set value of this object should be the exact characters expected to be received on the port opened with the 'open' command. The value could also be a single wildcard character '*' which means any received content will be accepted. The 'expect ' characters will be automatically appended. Also a 'null terminator'() will be automatically appended. The null terminator and the 'expect ' characters will be counted as characters in the script.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..505)  

hcsNewCfgAddLongNsendCmd 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.19
Append an 'nsend' command to the script. The 'nsend' command is used to append additional content to the packet generated by the 'bsend' command when the desired 'bsend' content is more than 255 characters. The set value of this object should be the exact characters to be appended. The 'nsend ' characters will be automatically appended. Also a 'null terminator' () will be automatically appended. The null terminator and the 'nsend ' characters will be counted as characters in the script.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..506)  

hcsNewCfgAddLongNexpectCmd 1.3.6.1.4.1.1872.2.5.4.1.1.13.3.1.20
Append an 'nexpect' command to the script. The 'nexpect' command is used to append additional characters to the 'bexpect' string when the desired 'bexpect' string is more than 255 characters. The set value of this object should be the exact characters to be appended. The 'nexpect ' characters will be automatically appended. Also a 'null terminator'() will be automatically appended. The null terminator and the 'nexpect ' characters will be counted as characters in the script.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..504)  

snmphcTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.14.1
The maximum number of SNMP health check entries.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

snmphcCurCfgTable 1.3.6.1.4.1.1872.2.5.4.1.1.14.2
The SNMP health check table in the current configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnmphcCurCfgTableEntry

snmphcCurCfgTableEntry 1.3.6.1.4.1.1872.2.5.4.1.1.14.2.1
A row in the SNMP health check table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SnmphcCurCfgTableEntry  

snmphcCurCfgIndex 1.3.6.1.4.1.1872.2.5.4.1.1.14.2.1.1
The index of the SNMP health check.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

snmphcCurCfgOid 1.3.6.1.4.1.1872.2.5.4.1.1.14.2.1.2
The OID to be sent in the SNMP get request packet.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

snmphcCurCfgCommString 1.3.6.1.4.1.1872.2.5.4.1.1.14.2.1.3
The community string to be used in the SNMP get request packet.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

snmphcCurCfgRcvContent 1.3.6.1.4.1.1872.2.5.4.1.1.14.2.1.4
The content expected in the SNMP response packet. The content specified can be either a string or an integer value.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

snmphcCurCfgInvert 1.3.6.1.4.1.1872.2.5.4.1.1.14.2.1.5
When the invert option is enabled the health check will fail if the response packet contains the value specified in the receive content field.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

snmphcCurCfgUseWeight 1.3.6.1.4.1.1872.2.5.4.1.1.14.2.1.6
When the weight option is enabled the real server weights are adjusted dynamically based on the SNMP health check response.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

snmphcNewCfgTable 1.3.6.1.4.1.1872.2.5.4.1.1.14.3
The SNMP health check table in the new configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnmphcNewCfgTableEntry

snmphcNewCfgTableEntry 1.3.6.1.4.1.1872.2.5.4.1.1.14.3.1
A row in the SNMP health check table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SnmphcNewCfgTableEntry  

snmphcNewCfgIndex 1.3.6.1.4.1.1872.2.5.4.1.1.14.3.1.1
The index of the SNMP health check.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

snmphcNewCfgOid 1.3.6.1.4.1.1872.2.5.4.1.1.14.3.1.2
The OID to be sent in the SNMP get request packet.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..128)  

snmphcNewCfgCommString 1.3.6.1.4.1.1872.2.5.4.1.1.14.3.1.3
The community string to be used in the SNMP get request packet.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

snmphcNewCfgRcvContent 1.3.6.1.4.1.1872.2.5.4.1.1.14.3.1.4
The content expected in the SNMP response packet. The content specified can be either a string or an integer value.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

snmphcNewCfgInvert 1.3.6.1.4.1.1872.2.5.4.1.1.14.3.1.5
When the invert option is enabled the health check will fail if the response packet contains the value specified in the receive content field.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

snmphcNewCfgDeleteHc 1.3.6.1.4.1.1872.2.5.4.1.1.14.3.1.6
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

snmphcNewCfgUseWeight 1.3.6.1.4.1.1872.2.5.4.1.1.14.3.1.7
When the weight option is enabled the real server weights are adjusted dynamically based on the SNMP health check response.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

curCfgFilterTableSize 1.3.6.1.4.1.1872.2.5.4.1.4.1
Indicates the number of entries in the filter table current configuration.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

newCfgFilterTableSize 1.3.6.1.4.1.1872.2.5.4.1.4.2
Indicates the number of entries in the filter table new configuration.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

curCfgRealServerTableSize 1.3.6.1.4.1.1872.2.5.4.1.4.3
Indicates the number of entries in the SLB real server table current configuration.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

newCfgRealServerTableSize 1.3.6.1.4.1.1872.2.5.4.1.4.4
Indicates the number of entries in the SLB real server table new configuration.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

curCfgRealServerGroupTableSize 1.3.6.1.4.1.1872.2.5.4.1.4.5
Indicates the number of entries in the SLB real server group table current configuration.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

newCfgRealServerGroupTableSize 1.3.6.1.4.1.1872.2.5.4.1.4.6
Indicates the number of entries in the SLB real server group table new configuration.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

curCfgVirtServerTableSize 1.3.6.1.4.1.1872.2.5.4.1.4.7
Indicates the number of entries in the SLB virtual server table current configuration.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

newCfgVirtServerTableSize 1.3.6.1.4.1.1872.2.5.4.1.4.8
Indicates the number of entries in the SLB virtual server table new configuration.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pipTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.15.1
The maximum number of PIP entries.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pipCurCfgBaseType 1.3.6.1.4.1.1872.2.5.4.1.1.15.2
The PIP base. 1 = port based, 2 = VLAN based
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER port(1), vlan(2)  

pipCurCfgTable 1.3.6.1.4.1.1872.2.5.4.1.1.15.3
The PIP table in the current configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PipCurCfgTableEntry

pipCurCfgTableEntry 1.3.6.1.4.1.1872.2.5.4.1.1.15.3.1
A row in the PIP table.
Status: current Access: not-accessible
OBJECT-TYPE    
  PipCurCfgTableEntry  

pipCurCfgPip 1.3.6.1.4.1.1872.2.5.4.1.1.15.3.1.1
Proxy IP address by the instance of the pipCurCfgIndex.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

pipCurCfgPortMap 1.3.6.1.4.1.1872.2.5.4.1.1.15.3.1.2
This is a bit map of port. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 ||_________ port 1 |__________ unused where x : 1 - PIP is used for this port. x : 0 - PIP Not used for this port.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..8)  

pipCurCfgVlanMap 1.3.6.1.4.1.1872.2.5.4.1.1.15.3.1.3
This is a bit map of VLAN. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ VLAN 8 || || || ||___ VLAN 7 || |____ VLAN 6 ||_________ VLAN 1 |__________ unused where x : 1 - PIP is used for this VLAN. x : 0 - PIP Not used for this VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

pipNewCfgBaseType 1.3.6.1.4.1.1872.2.5.4.1.1.15.4
The PIP base. 1 = port based, 2 = VLAN based
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER port(1), vlan(2)  

pipNewCfgTable 1.3.6.1.4.1.1872.2.5.4.1.1.15.5
The PIP table in the New configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PipNewCfgTableEntry

pipNewCfgTableEntry 1.3.6.1.4.1.1872.2.5.4.1.1.15.5.1
A row in the PIP table.
Status: current Access: not-accessible
OBJECT-TYPE    
  PipNewCfgTableEntry  

pipNewCfgPip 1.3.6.1.4.1.1872.2.5.4.1.1.15.5.1.1
PIP address by the instance of the pipCurCfgIndex.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

pipNewCfgPortMap 1.3.6.1.4.1.1872.2.5.4.1.1.15.5.1.2
The bit map of port for PIP. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 ||_________ port 1 |__________ unused where x : 1 - PIP is used for this port. x : 0 - PIP Not used for this port.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..8)  

pipNewCfgVlanMap 1.3.6.1.4.1.1872.2.5.4.1.1.15.5.1.3
The bit map of VLAN for PIP. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ VLAN 8 || || || ||___ VLAN 7 || |____ VLAN 6 ||_________ VLAN 1 |__________ unused where x : 1 - PIP is used for this VLAN. x : 0 - PIP Not used for this VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

pipNewCfgDelete 1.3.6.1.4.1.1872.2.5.4.1.1.15.5.1.4
By setting the value to delete(2), the entire row is deleted.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

pipNewCfgAddPortVlan 1.3.6.1.4.1.1872.2.5.4.1.1.15.5.1.5
The Port or VLAN to be associated with the PIP. When read, 0 is returned.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

pipNewCfgRemovePortVlan 1.3.6.1.4.1.1872.2.5.4.1.1.15.5.1.6
The Port or VLAN to be disassociated from the PIP. When read, 0 is returned.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

pipNewCfgAddPort 1.3.6.1.4.1.1872.2.5.4.1.1.15.5.1.7
The Port to be associated with the PIP. When read, 0 is returned.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

pipNewCfgAddVlan 1.3.6.1.4.1.1872.2.5.4.1.1.15.5.1.8
The VLAN to be associated with the PIP. When read, 0 is returned.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

pipNewCfgRemovePort 1.3.6.1.4.1.1872.2.5.4.1.1.15.5.1.9
The Port to be disassociated from the PIP. When read, 0 is returned.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

pipNewCfgRemoveVlan 1.3.6.1.4.1.1872.2.5.4.1.1.15.5.1.10
The VLAN to be disassociated from the PIP. When read, 0 is returned.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

pip6CurCfgTable 1.3.6.1.4.1.1872.2.5.4.1.1.15.6
The IPv6 PIP table in the current configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Pip6CurCfgTableEntry

pip6CurCfgTableEntry 1.3.6.1.4.1.1872.2.5.4.1.1.15.6.1
A row in the IPv6 PIP table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Pip6CurCfgTableEntry  

pip6CurCfgPip 1.3.6.1.4.1.1872.2.5.4.1.1.15.6.1.1
IPv6 Proxy IP address by the instance of the pip6CurCfgIndex.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

pip6CurCfgPortMap 1.3.6.1.4.1.1872.2.5.4.1.1.15.6.1.2
This is a bit map of port. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 ||_________ port 1 |__________ unused where x : 1 - PIP is used for this port. x : 0 - PIP Not used for this port.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..8)  

pip6CurCfgVlanMap 1.3.6.1.4.1.1872.2.5.4.1.1.15.6.1.3
This is a bit map of VLAN. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ VLAN 8 || || || ||___ VLAN 7 || |____ VLAN 6 ||_________ VLAN 1 |__________ unused where x : 1 - PIP is used for this VLAN. x : 0 - PIP Not used for this VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

pip6NewCfgTable 1.3.6.1.4.1.1872.2.5.4.1.1.15.7
The IPv6 PIP table in the New configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Pip6NewCfgTableEntry

pip6NewCfgTableEntry 1.3.6.1.4.1.1872.2.5.4.1.1.15.7.1
A row in the IPv6 PIP table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Pip6NewCfgTableEntry  

pip6NewCfgPip 1.3.6.1.4.1.1872.2.5.4.1.1.15.7.1.1
IPv6 PIP address by the instance of the pip6CurCfgIndex.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..50)  

pip6NewCfgPortMap 1.3.6.1.4.1.1872.2.5.4.1.1.15.7.1.2
The bit map of port for PIP. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 ||_________ port 1 |__________ unused where x : 1 - PIP is used for this port. x : 0 - PIP Not used for this port.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..8)  

pip6NewCfgVlanMap 1.3.6.1.4.1.1872.2.5.4.1.1.15.7.1.3
The bit map of VLAN for PIP. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ VLAN 8 || || || ||___ VLAN 7 || |____ VLAN 6 ||_________ VLAN 1 |__________ unused where x : 1 - PIP is used for this VLAN. x : 0 - PIP Not used for this VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

pip6NewCfgDelete 1.3.6.1.4.1.1872.2.5.4.1.1.15.7.1.4
By setting the value to delete(2), the entire row is deleted.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

pip6NewCfgAddPortVlan 1.3.6.1.4.1.1872.2.5.4.1.1.15.7.1.5
The Port or VLAN to be associated with the PIP. When read, 0 is returned.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

pip6NewCfgRemovePortVlan 1.3.6.1.4.1.1872.2.5.4.1.1.15.7.1.6
The Port or VLAN to be disassociated from the PIP. When read, 0 is returned.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

pip6NewCfgAddPort 1.3.6.1.4.1.1872.2.5.4.1.1.15.7.1.7
The Port to be associated with the PIP. When read, 0 is returned.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

pip6NewCfgAddVlan 1.3.6.1.4.1.1872.2.5.4.1.1.15.7.1.8
The VLAN to be associated with the PIP. When read, 0 is returned.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

pip6NewCfgRemovePort 1.3.6.1.4.1.1872.2.5.4.1.1.15.7.1.9
The Port to be disassociated from the PIP. When read, 0 is returned.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

pip6NewCfgRemoveVlan 1.3.6.1.4.1.1872.2.5.4.1.1.15.7.1.10
The VLAN to be disassociated from the PIP. When read, 0 is returned.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

slbStatSpRealServerTable 1.3.6.1.4.1.1872.2.5.4.2.1.1
The sp-server statistics table. This table shows the statistics of real servers for a particular SP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbStatSpRealServerEntry

slbStatSpRealServerEntry 1.3.6.1.4.1.1872.2.5.4.2.1.1.1
A row in the sp-server statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbStatSpRealServerEntry  

slbStatSpRealServerSpIndex 1.3.6.1.4.1.1872.2.5.4.2.1.1.1.1
The SP index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbStatSpRealServerServerIndex 1.3.6.1.4.1.1872.2.5.4.2.1.1.1.2
The real server number that identifies the server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbStatSpRealServerCurrSessions 1.3.6.1.4.1.1872.2.5.4.2.1.1.1.3
The current sessions for the real server.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

slbStatSpRealServerTotalSessions 1.3.6.1.4.1.1872.2.5.4.2.1.1.1.4
The total number of sessions for the real server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpRealServerHCOctetsLow32 1.3.6.1.4.1.1872.2.5.4.2.1.1.1.5
The lower 32 bit value of the total octets received and transmitted out of the real server on a particular SP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpRealServerHCOctetsHigh32 1.3.6.1.4.1.1872.2.5.4.2.1.1.1.6
The higher 32 bit value of the total octets received and transmitted out of the real server on a particular SP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpRealServerHCOctets 1.3.6.1.4.1.1872.2.5.4.2.1.1.1.7
The total octets received and transmitted by the real server on a particular SP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slbStatSpFltTable 1.3.6.1.4.1.1872.2.5.4.2.1.4
The filter statistics table. This table shows the statistics of filters for a particular SP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbStatSpFltEntry

slbStatSpFltEntry 1.3.6.1.4.1.1872.2.5.4.2.1.4.1
A row in the filter statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbStatSpFltEntry  

slbStatSpFltSpIndex 1.3.6.1.4.1.1872.2.5.4.2.1.4.1.1
The SP index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbStatSpFltIndex 1.3.6.1.4.1.1872.2.5.4.2.1.4.1.2
The filter number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbStatSpFltFirings 1.3.6.1.4.1.1872.2.5.4.2.1.4.1.3
The number of instances that the received packet matches the filter rule on this SP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpMaintTable 1.3.6.1.4.1.1872.2.5.4.2.1.5
The table of SLB SP maintenance statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbStatSpMaintEntry

slbStatSpMaintEntry 1.3.6.1.4.1.1872.2.5.4.2.1.5.1
A row in the SLB SP maintenance statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbStatSpMaintEntry  

slbStatSpMaintSpIndex 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.1
The SP number for which the statistics apply.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbStatSpMaintMaximumSessions 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.2
The maximun number of entries per SP in the session table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbStatSpMaintCurBindings 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.3
The current number of sessions on the SP.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

slbStatSpMaintCurBindings4Seconds 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.4
The 4 second average current number of sessions on the SP.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

slbStatSpMaintCurBindings64Seconds 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.5
The 64 second average current number of sessions on the SP.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

slbStatSpMaintTerminatedSessions 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.6
The count of the number of sessions closed because the server failed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpMaintBindingFails 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.7
The total number of binding failures on the SP. A binding failure occurs when a SP runs out of session table entries.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpMaintNonTcpFrames 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.8
The total number of non-TCP/IP frames dropped on the SP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpMaintTcpFragments 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.9
The total number of TCP fragments dropped on the SP.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpMaintUdpDatagrams 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.10
The total number of UDP datagrams dropped on the SP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpMaintIncorrectVIPs 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.11
The total number of frames with incorrect VIPs that are dropped on the SP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpMaintIncorrectVports 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.12
The total number of frames with incorrect Virtual Port that are dropped on the SP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpMaintRealServerNoAvails 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.13
The total number of frames that are dropped on the SP because no real server is available.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpMaintFilteredDeniedFrames 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.14
The total number of frames that are denied on the SP by the filter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpMaintLandAttacks 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.15
The total number of attacks that frames contain the same source and destination IP addresses.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpMaintIpFragTotalSessions 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.16
The total number of fragment sessions processed on the SP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpMaintIpFragCurSessions 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.17
The number of sessions in the IP fragment binding table on the SP.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

slbStatSpMaintIpFragDiscards 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.18
The total number of fragments discarded on the SP because there is no entry in the IP fragment binding table.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpMaintIpFragTableFull 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.19
The total number of times IP fragment binding table is full on the SP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpMaintClear 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.20
This is an action object to clear the non-operational SLB statistics on the particular SP. ok(1) is returned when read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ok(1), clear(2)  

slbStatSpMaintOOSFinPktDrops 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.21
The total number of Out of state FIN Packets received on the SP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpMaintSymSessions 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.22
Number of Symantec sessions.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpMaintSymValidSegments 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.23
Number of Symantec valid segments.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpMaintSymFragSessions 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.24
Number of Symantec fragment sessions.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpMaintSymSegAllocFails 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.25
Number of Symantec segment allocation fails.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpMaintSymBufferAllocFails 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.26
Number of Symantec buffers allocation fails.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpMaintSymConnAllocFails 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.27
Number of Symantec Connection allocation fails.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpMaintSymInvalidBuffers 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.28
Number of Symantec Invalid buffers.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpMaintSymSegReallocFails 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.29
Number of Symantec Segment reallocation fails.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpMaintSymPacketsIn 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.30
Symantec Deuce Inspection Stats - No. of packets in.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpMaintSymPacketsWithNoData 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.31
Symantec Deuce Inspection Stats - No. of packets with no data.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpMaintSymTcpPackets 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.32
Symantec Deuce Inspection Stats - No. of TCP packets
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpMaintSymUdpPackets 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.33
Symantec Deuce Inspection Stats - No. of UDP Packets
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpMaintSymIcmpPackets 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.34
Symantec Deuce Inspection Stats - No. of ICMP Packets
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpMaintSymOtherPackets 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.35
Symantec Deuce Inspection Stats - No. of Packets other than TCP UDP or ICMP
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpMaintSymMatchCount 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.36
Symantec Deuce Inspection Stats - Match Count
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpMaintSymFetchErrors 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.37
Symantec Deuce Inspection Stats - No. of Fetch Errors
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpMaintSymTruncPayloadToMp 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.38
Symantec Deuce Inspection Stats - No. of Truncated payload to MP
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpMaintSymPacketsInFastPath 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.39
Symantec Deuce Inspection Stats - No. of Packets in fast path
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSpAuxSessTable 1.3.6.1.4.1.1872.2.5.4.2.1.6
The auxiliary session table statistics for a particular SP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbStatSpAuxSessEntry

slbStatSpAuxSessEntry 1.3.6.1.4.1.1872.2.5.4.2.1.6.1
The statistics of a particular auxiliary session table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbStatSpAuxSessEntry  

slbStatSpAuxSessSpIndex 1.3.6.1.4.1.1872.2.5.4.2.1.6.1.1
The SP number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbStatSpAuxSessIndex 1.3.6.1.4.1.1872.2.5.4.2.1.6.1.2
The auxiliary session table number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbStatSpAuxSessCurConn 1.3.6.1.4.1.1872.2.5.4.2.1.6.1.3
The number of connections in this auxiliary sessions table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

slbStatSpAuxSessMaxConn 1.3.6.1.4.1.1872.2.5.4.2.1.6.1.4
The maximum number of connections handled by this auxiliary session table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbStatSpAuxSessAllocFails 1.3.6.1.4.1.1872.2.5.4.2.1.6.1.5
The total number of allocation failures for this auxiliary session table.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatRServerTable 1.3.6.1.4.1.1872.2.5.4.2.2
The real server statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbStatRServerEntry

slbStatRServerEntry 1.3.6.1.4.1.1872.2.5.4.2.2.1
The statistics of a particular real server.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbStatRServerEntry  

slbStatRServerIndex 1.3.6.1.4.1.1872.2.5.4.2.2.1.1
The real server number that identifies the server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbStatRServerCurrSessions 1.3.6.1.4.1.1872.2.5.4.2.2.1.2
The number of sessions that are currently handled by the real server.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

slbStatRServerTotalSessions 1.3.6.1.4.1.1872.2.5.4.2.2.1.3
The total number of sessions that are handled by the real server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatRServerFailures 1.3.6.1.4.1.1872.2.5.4.2.2.1.4
The total number of times that the real server is claimed down.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatRServerHighestSessions 1.3.6.1.4.1.1872.2.5.4.2.2.1.5
The highest sessions that have been handled by the real server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatRServerHCOctetsLow32 1.3.6.1.4.1.1872.2.5.4.2.2.1.6
The lower 32 bit value of octets received and transmitted out of the real server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatRServerHCOctetsHigh32 1.3.6.1.4.1.1872.2.5.4.2.2.1.7
The higher 32 bit value of octets received and transmitted out of the real server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatRServerHCOctets 1.3.6.1.4.1.1872.2.5.4.2.2.1.8
The total number of octets received and transmitted by the real server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slbStatGroupTable 1.3.6.1.4.1.1872.2.5.4.2.3
The real server group statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbStatGroupEntry

slbStatGroupEntry 1.3.6.1.4.1.1872.2.5.4.2.3.1
The statistics of a particular real server group.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbStatGroupEntry  

slbStatGroupIndex 1.3.6.1.4.1.1872.2.5.4.2.3.1.1
The real server group number that identifies the group.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbStatGroupCurrSessions 1.3.6.1.4.1.1872.2.5.4.2.3.1.2
The number of sessions that are currently handled by the real server group.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

slbStatGroupTotalSessions 1.3.6.1.4.1.1872.2.5.4.2.3.1.3
The total number of sessions that are handled by the real server group.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatGroupHighestSessions 1.3.6.1.4.1.1872.2.5.4.2.3.1.4
The highest sessions that have been handled by the real server group.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatGroupHCOctetsLow32 1.3.6.1.4.1.1872.2.5.4.2.3.1.5
The lower 32 bit value of octets received and transmitted out of the real server group.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatGroupHCOctetsHigh32 1.3.6.1.4.1.1872.2.5.4.2.3.1.6
The higher 32 bit value of octets received and transmitted out of the real server group.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatGroupHCOctets 1.3.6.1.4.1.1872.2.5.4.2.3.1.7
The total octets received and transmitted by the real server group.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slbStatGroupWlmUpdates 1.3.6.1.4.1.1872.2.5.4.2.3.1.8
Total weight updates from work load manager.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatVServerTable 1.3.6.1.4.1.1872.2.5.4.2.4
The virtual server statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbStatVServerEntry

slbStatVServerEntry 1.3.6.1.4.1.1872.2.5.4.2.4.1
The statistics of a particular virtual server group.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbStatVServerEntry  

slbStatVServerIndex 1.3.6.1.4.1.1872.2.5.4.2.4.1.1
The virtual server number that identifies the server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbStatVServerCurrSessions 1.3.6.1.4.1.1872.2.5.4.2.4.1.2
The number of sessions that are currently handled by the virtual server.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

slbStatVServerTotalSessions 1.3.6.1.4.1.1872.2.5.4.2.4.1.3
The total number of sessions that are handled by the virtual server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatVServerHighestSessions 1.3.6.1.4.1.1872.2.5.4.2.4.1.4
The highest sessions that have been handled by the virtual server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatVServerHCOctetsLow32 1.3.6.1.4.1.1872.2.5.4.2.4.1.5
The lower 32 bit value of octets received and transmitted out of the virtual server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatVServerHCOctetsHigh32 1.3.6.1.4.1.1872.2.5.4.2.4.1.6
The higher 32 bit value of octets received and transmitted out of the virtual server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatVServerHeaderHits 1.3.6.1.4.1.1872.2.5.4.2.4.1.8
The current HTTP header hits.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatVServerHeaderMisses 1.3.6.1.4.1.1872.2.5.4.2.4.1.9
The current HTTP header misses.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatVServerHeaderTotalSessions 1.3.6.1.4.1.1872.2.5.4.2.4.1.10
The total HTTP header sessions.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatVServerCookieRewrites 1.3.6.1.4.1.1872.2.5.4.2.4.1.11
The total Cookie Rewrites.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatVServerCookieInserts 1.3.6.1.4.1.1872.2.5.4.2.4.1.12
The total Cookie Inserts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatVServerHCOctets 1.3.6.1.4.1.1872.2.5.4.2.4.1.13
The total octets received and transmitted by the virtual server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

slbStatVServerIpAddress 1.3.6.1.4.1.1872.2.5.4.2.4.1.14
IP address of the virtual server.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

slbStatMaintMaximumSessions 1.3.6.1.4.1.1872.2.5.4.2.5.1
The maximun number entries in the session table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbStatMaintCurBindings 1.3.6.1.4.1.1872.2.5.4.2.5.2
The current number of bindings on the port.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

slbStatMaintCurBindings4Seconds 1.3.6.1.4.1.1872.2.5.4.2.5.3
The 4 second average current number of bindings on the port.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

slbStatMaintCurBindings64Seconds 1.3.6.1.4.1.1872.2.5.4.2.5.4
The 64 second average current number of bindings on the port.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

slbStatMaintTerminatedSessions 1.3.6.1.4.1.1872.2.5.4.2.5.5
The count of the number of sessions closed because the server failed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatMaintAllocFailures 1.3.6.1.4.1.1872.2.5.4.2.5.6
The total number of Binding failures on the port. A Binding Failure occurs when a port runs out of binding table entries.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatMaintNonTcpFrames 1.3.6.1.4.1.1872.2.5.4.2.5.7
The total number of non-TCP/IP frames dropped on the port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatMaintTcpFragments 1.3.6.1.4.1.1872.2.5.4.2.5.8
The total number of TCP fragments dropped on the port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatMaintUdpDatagrams 1.3.6.1.4.1.1872.2.5.4.2.5.9
The total number of UDP datagrams dropped on the port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbIncorrectVirtServs 1.3.6.1.4.1.1872.2.5.4.2.5.10
Incorrect Virtual Servers specified for Server Load Balancing.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbIncorrectVports 1.3.6.1.4.1.1872.2.5.4.2.5.11
Incorrect Virtual ports specified for Server Load Balancing.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbNoRealServs 1.3.6.1.4.1.1872.2.5.4.2.5.12
No Real Servers available for Server Load Balancing.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatMaintBackupServActs 1.3.6.1.4.1.1872.2.5.4.2.5.13
The total number of times that backup servers become active due to failure of primary servers.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatMaintOverflowServActs 1.3.6.1.4.1.1872.2.5.4.2.5.14
The total number of times that backup servers become active due to primary servers reach overflow situation.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatMaintFilteredDeniedFrames 1.3.6.1.4.1.1872.2.5.4.2.5.15
The total number of frames that are denied on the port by the filter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatMaintLandAttacks 1.3.6.1.4.1.1872.2.5.4.2.5.16
The total number of attacks that frames contain the same source and destination IP addresses.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatMaintIpFragTotalSessions 1.3.6.1.4.1.1872.2.5.4.2.5.17
The total number of fragment sessions processed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatMaintIpFragCurSessions 1.3.6.1.4.1.1872.2.5.4.2.5.18
The number of sessions in the IP fragment binding table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

slbStatMaintIpFragDiscards 1.3.6.1.4.1.1872.2.5.4.2.5.19
The total number of fragmemts discarded on the SP because there is no entry in the IP fragment binding table.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatMaintIpFragTableFull 1.3.6.1.4.1.1872.2.5.4.2.5.20
The total number times IP fragment binding table is full on the SP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatMaintIp6CurrSessions 1.3.6.1.4.1.1872.2.5.4.2.5.21
The number of sessions for ipv6.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbIncorrectIp6Vip 1.3.6.1.4.1.1872.2.5.4.2.5.22
Incorrect Ip6 VIPs specified for server load balancing.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbIncorrectIp6Vports 1.3.6.1.4.1.1872.2.5.4.2.5.23
Incorrect Ip6 virtual ports specified for server load balancing.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatMaintIp6PktDropped 1.3.6.1.4.1.1872.2.5.4.2.5.24
The total number of Ip6 pacekets dropped.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatMaintOOSFinPktDrops 1.3.6.1.4.1.1872.2.5.4.2.5.25
The total number Out of state FIN Packet drops.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatMaintSymSessions 1.3.6.1.4.1.1872.2.5.4.2.5.26
Total number of Symantec sessions.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatMaintSymValidSegments 1.3.6.1.4.1.1872.2.5.4.2.5.27
Total number of Symantec valid segments.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatMaintSymFragSessions 1.3.6.1.4.1.1872.2.5.4.2.5.28
Total number of Symantec fragment sessions.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatMaintSymSegAllocFails 1.3.6.1.4.1.1872.2.5.4.2.5.29
Total number of Symantec segment allocation fails.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatMaintSymBufferAllocFails 1.3.6.1.4.1.1872.2.5.4.2.5.30
Total number of Symantec buffers allocation fails.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatMaintSymConnAllocFails 1.3.6.1.4.1.1872.2.5.4.2.5.31
Total number of Symantec Connection allocation fails.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatMaintSymInvalidBuffers 1.3.6.1.4.1.1872.2.5.4.2.5.32
Total number of Symantec Invalid buffers.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatMaintSymSegReallocFails 1.3.6.1.4.1.1872.2.5.4.2.5.33
Total number of Symantec Segment reallocation fails.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatMaintSymPacketsIn 1.3.6.1.4.1.1872.2.5.4.2.5.34
Symantec Deuce Inspection Stats - Total no. of Packets in.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatMaintSymPacketsWithNoData 1.3.6.1.4.1.1872.2.5.4.2.5.35
Symantec Deuce Inspection Stats - Total no. of Packets with no data.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatMaintSymTcpPackets 1.3.6.1.4.1.1872.2.5.4.2.5.36
Symantec Deuce Inspection Stats - Total no. of TCP packets
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatMaintSymUdpPackets 1.3.6.1.4.1.1872.2.5.4.2.5.37
Symantec Deuce Inspection Stats - Total no. of UDP Packets
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatMaintSymIcmpPackets 1.3.6.1.4.1.1872.2.5.4.2.5.38
Symantec Deuce Inspection Stats - Total no. of ICMP Packets
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatMaintSymOtherPackets 1.3.6.1.4.1.1872.2.5.4.2.5.39
Symantec Deuce Inspection Stats - Total no. of Packets other than TCP UDP or ICMP
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatMaintSymMatchCount 1.3.6.1.4.1.1872.2.5.4.2.5.40
Symantec Deuce Inspection Stats - Total Match Count
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatMaintSymFetchErrors 1.3.6.1.4.1.1872.2.5.4.2.5.41
Symantec Deuce Inspection Stats - Total no. of Fetch Errors
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatMaintSymTruncPayloadToMp 1.3.6.1.4.1.1872.2.5.4.2.5.42
Symantec Deuce Inspection Stats - Total no. of Truncated payload to MP
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatMaintSymPacketsInFastPath 1.3.6.1.4.1.1872.2.5.4.2.5.43
Symantec Deuce Inspection Stats - Total no. of Packets in fast path
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

fltStatTable 1.3.6.1.4.1.1872.2.5.4.2.6.1
The filter statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FltStatTableEntry

fltStatTableEntry 1.3.6.1.4.1.1872.2.5.4.2.6.1.1
A row in filter statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  FltStatTableEntry  

fltStatFltIndex 1.3.6.1.4.1.1872.2.5.4.2.6.1.1.1
The number that identifies the filter.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

fltStatFltFirings 1.3.6.1.4.1.1872.2.5.4.2.6.1.1.2
The number of instances that the received packet matches the filter rule.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatRemRealServerTable 1.3.6.1.4.1.1872.2.5.4.2.7.1
The GSLB remote real server statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GslbStatRemRealServerEntry

gslbStatRemRealServerEntry 1.3.6.1.4.1.1872.2.5.4.2.7.1.1
A row in the remote real server statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  GslbStatRemRealServerEntry  

gslbStatRemRealServerIndex 1.3.6.1.4.1.1872.2.5.4.2.7.1.1.1
The server number that identifies the remote real server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbStatRemRealServerDnsHandoffs 1.3.6.1.4.1.1872.2.5.4.2.7.1.1.2
The number of DNS handoffs by the remote real server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatRemRealServerHttpRedirs 1.3.6.1.4.1.1872.2.5.4.2.7.1.1.3
The number of HTTP redirections by the remote real server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbMaintStats 1.3.6.1.4.1.1872.2.5.4.2.7.2
OBJECT IDENTIFIER    

gslbStatMaintInGoodSiteUpdates 1.3.6.1.4.1.1872.2.5.4.2.7.2.1
The number of good DSSPv1 remote site updates received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatMaintInBadSiteUpdates 1.3.6.1.4.1.1872.2.5.4.2.7.2.2
The number of bad remote site packets received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatMaintOutSiteUpdates 1.3.6.1.4.1.1872.2.5.4.2.7.2.3
The number of DSSPv1 remote site updates sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatMaintInGoodSiteUpdates2 1.3.6.1.4.1.1872.2.5.4.2.7.2.4
The number of good DSSPv2 remote site updates received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatMaintOutSiteUpdates2 1.3.6.1.4.1.1872.2.5.4.2.7.2.5
The number of DSSPv2 remote site updates sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatMaintLocalSitePers 1.3.6.1.4.1.1872.2.5.4.2.7.2.8
The number of local site DNS persistence cache entries added.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatMaintInDns 1.3.6.1.4.1.1872.2.5.4.2.7.2.10
The number of DNS queries received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatMaintInBadDns 1.3.6.1.4.1.1872.2.5.4.2.7.2.11
The number of bad DNS queries received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatMaintOutDns 1.3.6.1.4.1.1872.2.5.4.2.7.2.12
The number of DNS responses sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatMaintInHttp 1.3.6.1.4.1.1872.2.5.4.2.7.2.13
The number of HTTP requests received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatMaintInBadHttp 1.3.6.1.4.1.1872.2.5.4.2.7.2.14
The number of bad HTTP requests received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatMaintOutHttp 1.3.6.1.4.1.1872.2.5.4.2.7.2.15
The number of HTTP responses sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatMaintNoServer 1.3.6.1.4.1.1872.2.5.4.2.7.2.16
The number of times no server returned.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatMaintNoDomain 1.3.6.1.4.1.1872.2.5.4.2.7.2.17
The number of times no matching domain.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatMaintHostHits 1.3.6.1.4.1.1872.2.5.4.2.7.2.18
The number of hostname domain hits.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatMaintRuleHits 1.3.6.1.4.1.1872.2.5.4.2.7.2.19
The number of network domain hits.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatMaintVirtHits 1.3.6.1.4.1.1872.2.5.4.2.7.2.20
The number of basic domain hits.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatMaintNoServerHost 1.3.6.1.4.1.1872.2.5.4.2.7.2.21
The number of times no server returned for hostname domain.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatMaintNoServerRule 1.3.6.1.4.1.1872.2.5.4.2.7.2.22
The number of times no server returned for network domain.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatMaintNoServerVirt 1.3.6.1.4.1.1872.2.5.4.2.7.2.23
The number of times no server returned for basic domain.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatMaintLastNoResultDomain 1.3.6.1.4.1.1872.2.5.4.2.7.2.24
The last no result domain.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

gslbStatMaintLastSrcIp 1.3.6.1.4.1.1872.2.5.4.2.7.2.25
The last source IP address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

gslbStatMaintThresholdHits 1.3.6.1.4.1.1872.2.5.4.2.7.2.26
The number of times any servers not returned due to threshold exceeded for the corresponding server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatMaintLastSrcIpV6 1.3.6.1.4.1.1872.2.5.4.2.7.2.27
The last source IPV6 address.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

gslbStatGroupTable 1.3.6.1.4.1.1872.2.5.4.2.7.3
The GSLB group statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GslbStatGroupEntry

gslbStatGroupEntry 1.3.6.1.4.1.1872.2.5.4.2.7.3.1
A row in the GSLB group statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  GslbStatGroupEntry  

gslbStatGroupIndex 1.3.6.1.4.1.1872.2.5.4.2.7.3.1.1
The group number that identifies the real server group.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbStatGroupDnsHandoffs 1.3.6.1.4.1.1872.2.5.4.2.7.3.1.2
The total number of DNS hand-offs sent to the remote real servers in the group.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatGroupHttpRedirs 1.3.6.1.4.1.1872.2.5.4.2.7.3.1.3
The total number of HTTP redirects sent to the remote real servers in the group.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatVirtServerTable 1.3.6.1.4.1.1872.2.5.4.2.7.4
The Global SLB virtual server statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GslbStatVirtServerEntry

gslbStatVirtServerEntry 1.3.6.1.4.1.1872.2.5.4.2.7.4.1
A row in the Global SLB virtual server statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  GslbStatVirtServerEntry  

gslbStatVirtServerIdx 1.3.6.1.4.1.1872.2.5.4.2.7.4.1.1
The virtual server number that identifies the virtual server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbStatVirtServerServiceIdx 1.3.6.1.4.1.1872.2.5.4.2.7.4.1.2
The virtual server service number that identifies the virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbStatVirtServerRserverIdx 1.3.6.1.4.1.1872.2.5.4.2.7.4.1.3
The real server number that identifies a remote site. A index of 0 indicates a local virtual server number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbStatVirtServerVirtPort 1.3.6.1.4.1.1872.2.5.4.2.7.4.1.4
The virtual server service port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbStatVirtServerIpAddress 1.3.6.1.4.1.1872.2.5.4.2.7.4.1.5
The IP address of the virtual server or remote real server.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

gslbStatVirtServerResponseTime 1.3.6.1.4.1.1872.2.5.4.2.7.4.1.6
The average time (current weight) that each service takes to respond to information exchanges with its peers The time is specified in ticks of 65 milliseconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbStatVirtServerMinSessAvail 1.3.6.1.4.1.1872.2.5.4.2.7.4.1.7
The current number of sessions available for serving client requests. This number will change as client traffic loads change, or as real servers under the virtual server or remote sites go in or out of service.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

gslbStatVirtServerDname 1.3.6.1.4.1.1872.2.5.4.2.7.4.1.8
The domain name of the virtual server and remote real server.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

gslbStatVirtServerRemSite 1.3.6.1.4.1.1872.2.5.4.2.7.4.1.9
The remote site of the remote real server. For virtual server, the remote site is 0.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbStatVirtDnsDirect 1.3.6.1.4.1.1872.2.5.4.2.7.4.1.10
The total number of DNS directs sent to the virtual server or remote real server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatRemSiteTable 1.3.6.1.4.1.1872.2.5.4.2.7.5
The Global SLB remote site statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GslbStatRemSiteTableEntry

gslbStatRemSiteTableEntry 1.3.6.1.4.1.1872.2.5.4.2.7.5.1
A row in the Global SLB remote site statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  GslbStatRemSiteTableEntry  

gslbStatRemSiteIdx 1.3.6.1.4.1.1872.2.5.4.2.7.5.1.1
The remote site number that identifies the remote site.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbStatRemSiteOutUpdates 1.3.6.1.4.1.1872.2.5.4.2.7.5.1.2
The number of DSSPv1 remote site updates sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatRemSiteInUpdates 1.3.6.1.4.1.1872.2.5.4.2.7.5.1.3
The number of good DSSPv1 remote site updates received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatRemSiteOutUpdates2 1.3.6.1.4.1.1872.2.5.4.2.7.5.1.4
The number of DSSPv2 remote site updates sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatRemSiteInUpdates2 1.3.6.1.4.1.1872.2.5.4.2.7.5.1.5
The number of good DSSPv2 remote site updates received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatRemSiteInBadUpdates 1.3.6.1.4.1.1872.2.5.4.2.7.5.1.6
The number of bad remote site updates received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatEnhNetworkTable 1.3.6.1.4.1.1872.2.5.4.2.7.6
The Global SLB network statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GslbStatEnhNetworkTableEntry

gslbStatEnhNetworkTableEntry 1.3.6.1.4.1.1872.2.5.4.2.7.6.1
A row in the Global SLB network statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  GslbStatEnhNetworkTableEntry  

gslbStatEnhNetworkIdx 1.3.6.1.4.1.1872.2.5.4.2.7.6.1.1
The network number that identifies the network.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbStatEnhNetworkHit 1.3.6.1.4.1.1872.2.5.4.2.7.6.1.2
The number of times network is selected.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatRuleTable 1.3.6.1.4.1.1872.2.5.4.2.7.7
The Global SLB rule statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GslbStatRuleTableEntry

gslbStatRuleTableEntry 1.3.6.1.4.1.1872.2.5.4.2.7.7.1
A row in the Global SLB rule statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  GslbStatRuleTableEntry  

gslbStatRuleIdx 1.3.6.1.4.1.1872.2.5.4.2.7.7.1.1
The rule number that identifies the rule.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbStatRuleLeastconns 1.3.6.1.4.1.1872.2.5.4.2.7.7.1.2
The number of times leastconns is used.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatRuleRoundrobin 1.3.6.1.4.1.1872.2.5.4.2.7.7.1.3
The number of times roundrobin is used.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatRuleMinmisses 1.3.6.1.4.1.1872.2.5.4.2.7.7.1.4
The number of times minmisses is used.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatRuleHash 1.3.6.1.4.1.1872.2.5.4.2.7.7.1.5
The number of times hash is used.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatRuleResponse 1.3.6.1.4.1.1872.2.5.4.2.7.7.1.6
The number of times response is used.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatRuleGeographical 1.3.6.1.4.1.1872.2.5.4.2.7.7.1.7
The number of times geographical is used.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatRuleNetwork 1.3.6.1.4.1.1872.2.5.4.2.7.7.1.8
The number of times network is used.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatRuleRandom 1.3.6.1.4.1.1872.2.5.4.2.7.7.1.9
The number of times random is used.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatRuleAvailability 1.3.6.1.4.1.1872.2.5.4.2.7.7.1.10
The number of times availability is used.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatRuleQos 1.3.6.1.4.1.1872.2.5.4.2.7.7.1.11
The number of times qos is used.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatRulePersistence 1.3.6.1.4.1.1872.2.5.4.2.7.7.1.12
The number of times persistence is used.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatRuleLocal 1.3.6.1.4.1.1872.2.5.4.2.7.7.1.13
The number of times local is used.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatRuleAlways 1.3.6.1.4.1.1872.2.5.4.2.7.7.1.14
The number of times always is used.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatRuleRemote 1.3.6.1.4.1.1872.2.5.4.2.7.7.1.15
The number of times remote is used.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatRuleTotal 1.3.6.1.4.1.1872.2.5.4.2.7.7.1.16
The number of times all the metrics are used.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatGeo 1.3.6.1.4.1.1872.2.5.4.2.7.8
OBJECT IDENTIFIER    

gslbStatGeoNA 1.3.6.1.4.1.1872.2.5.4.2.7.8.1
The number of times North America is selected.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatGeoSA 1.3.6.1.4.1.1872.2.5.4.2.7.8.2
The number of times South America is selected.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatGeoEU 1.3.6.1.4.1.1872.2.5.4.2.7.8.3
The number of times Europe is selected.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatGeoCA 1.3.6.1.4.1.1872.2.5.4.2.7.8.4
The number of times Caribbean is selected.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatGeoPR 1.3.6.1.4.1.1872.2.5.4.2.7.8.5
The number of times Pacific Rim is selected.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatGeoSS 1.3.6.1.4.1.1872.2.5.4.2.7.8.6
The number of times Sub-Sahara is selected.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatGeoJP 1.3.6.1.4.1.1872.2.5.4.2.7.8.7
The number of times Japan is selected.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatGeoTotal 1.3.6.1.4.1.1872.2.5.4.2.7.8.8
The number of times any of the regions are selected.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatGeoAF 1.3.6.1.4.1.1872.2.5.4.2.7.8.9
The number of times Africa is selected.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatPers 1.3.6.1.4.1.1872.2.5.4.2.7.9
OBJECT IDENTIFIER    

gslbStatPersCurrent 1.3.6.1.4.1.1872.2.5.4.2.7.9.1
The current number of entries in the DNS persistence cache.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatPersHiwat 1.3.6.1.4.1.1872.2.5.4.2.7.9.2
The highest number of entries recorded in the DNS persistence cache.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

gslbStatPersMax 1.3.6.1.4.1.1872.2.5.4.2.7.9.3
The maximum number of entries supported in the DNS persistence cache.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ftpSlbStatTotal 1.3.6.1.4.1.1872.2.5.4.2.10.1
The number of times the switch receives both active and passive FTP connections.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ftpNatStatTotal 1.3.6.1.4.1.1872.2.5.4.2.10.2
The number of times the switch receives the 'port' command from the client.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ftpStatActiveNatIndex 1.3.6.1.4.1.1872.2.5.4.2.10.3
The number of times the switch creates a new index due to 'port' command from the client.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ftpStatNatAckSeqDiff 1.3.6.1.4.1.1872.2.5.4.2.10.4
The difference in the numbers of ACK and SEQ that the switch needs for packet adjustment.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ftpStatSlbParseIndex 1.3.6.1.4.1.1872.2.5.4.2.10.5
The number of times the switch creates a new index in response to the 'pasv' command from the client.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ftpStatSlbParseAckSeqDiff 1.3.6.1.4.1.1872.2.5.4.2.10.6
The difference in the numbers of ACK and SEQ that the switch needs for FTP SLB parsing.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ftpStatModeSwitchError 1.3.6.1.4.1.1872.2.5.4.2.10.7
The number of times the switch is not able to switch modes from active to passive and vice versa.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

radiusAcctReqsStats 1.3.6.1.4.1.1872.2.5.4.2.8.1
OBJECT IDENTIFIER    

tpcpAddSessReqsStats 1.3.6.1.4.1.1872.2.5.4.2.8.2
OBJECT IDENTIFIER    

tpcpDeleteSessReqsStats 1.3.6.1.4.1.1872.2.5.4.2.8.3
OBJECT IDENTIFIER    

radiusAcctReqs 1.3.6.1.4.1.1872.2.5.4.2.8.1.1
Radius Account Request.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

radiusAcctWrapReqs 1.3.6.1.4.1.1872.2.5.4.2.8.1.2
Radius Account Wrap Request.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

radiusAcctStartReqs 1.3.6.1.4.1.1872.2.5.4.2.8.1.3
Radius Account Start Request.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

radiusAcctUpdateReqs 1.3.6.1.4.1.1872.2.5.4.2.8.1.4
Radius Account Update Request.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

radiusAcctStopReqs 1.3.6.1.4.1.1872.2.5.4.2.8.1.5
Radius Account stop Request.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

radiusAcctBadReqs 1.3.6.1.4.1.1872.2.5.4.2.8.1.6
Radius Account Bad Request.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

radiusAcctAddSessionReqs 1.3.6.1.4.1.1872.2.5.4.2.8.1.7
Radius Account add session Request.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

radiusAcctDeleteSessionReqs 1.3.6.1.4.1.1872.2.5.4.2.8.1.8
Radius Account delete session Request.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

radiusAcctReqFailsSPDead 1.3.6.1.4.1.1872.2.5.4.2.8.1.10
Radius Account request fails SP Dead.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

radiusAcctReqFailsDMAFails 1.3.6.1.4.1.1872.2.5.4.2.8.1.11
Radius Account request fails DMA fails.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

radiusAcctReqWithFramedIp 1.3.6.1.4.1.1872.2.5.4.2.8.1.12
Radius Account request containing the FRAMED_IP field.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

radiusAcctReqWithoutFramedIp 1.3.6.1.4.1.1872.2.5.4.2.8.1.13
Radius Account request not containing the FRAMED_IP field.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tpcpAddSessReqs 1.3.6.1.4.1.1872.2.5.4.2.8.2.1
WAP add Session requests.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tpcpAddSessReqsFailsSPDead 1.3.6.1.4.1.1872.2.5.4.2.8.2.3
WAP add Session Fails as the SP is dead.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tpcpDeleteSessReqs 1.3.6.1.4.1.1872.2.5.4.2.8.3.1
TPCP Delete Session Requests.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tpcpDeleteSessReqsFailsSPDead 1.3.6.1.4.1.1872.2.5.4.2.8.3.3
TPCP Delete Session Fails as the SP is dead.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wapRequestToWrongSP 1.3.6.1.4.1.1872.2.5.4.2.8.4
The WAP delete Session Entries sent to wrong SP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rtspStatControlConns 1.3.6.1.4.1.1872.2.5.4.2.11.1
Total number of active RTSP control connections.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rtspStatUDPStreams 1.3.6.1.4.1.1872.2.5.4.2.11.2
Total number of active UDP streams.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rtspStatRedirects 1.3.6.1.4.1.1872.2.5.4.2.11.3
Total number of switch redirects.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rtspStatConnDenied 1.3.6.1.4.1.1872.2.5.4.2.11.4
Total connections denied due to RTSP connection limit.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rtspStatAllocFails 1.3.6.1.4.1.1872.2.5.4.2.11.5
Total cases of heap memory allocation failures.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rtspStatBufferAllocs 1.3.6.1.4.1.1872.2.5.4.2.11.6
The total number of buffer allocations used.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

tcpLimitStatHoldDowns 1.3.6.1.4.1.1872.2.5.4.2.12.1
Total number of client hold downs triggered.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tcpLimitStatClientEntries 1.3.6.1.4.1.1872.2.5.4.2.12.2
Current number of TCP rate limiting per-client state entries.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

udpLimitStatHoldDowns 1.3.6.1.4.1.1872.2.5.4.2.12.3
Total number of UDP client hold downs triggered.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

icmpLimitStatHoldDowns 1.3.6.1.4.1.1872.2.5.4.2.12.4
Total number of ICMP client hold downs triggered.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

udpLimitStatClientEntries 1.3.6.1.4.1.1872.2.5.4.2.12.5
Current number of UDP rate limiting per-client state entries.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

icmpLimitStatClientEntries 1.3.6.1.4.1.1872.2.5.4.2.12.6
Current number of ICMP rate limiting per-client state entries.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dnsSlbStatTCPQueries 1.3.6.1.4.1.1872.2.5.4.2.13.1
Total number of TCP DNS queries.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dnsSlbStatUDPQueries 1.3.6.1.4.1.1872.2.5.4.2.13.2
Total number of UDP DNS queries.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dnsSlbStatInvalidQueries 1.3.6.1.4.1.1872.2.5.4.2.13.3
Total number of invalid DNS queries.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dnsSlbStatMultipleQueries 1.3.6.1.4.1.1872.2.5.4.2.13.4
Total number of multiple DNS queries.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dnsSlbStatDnameParseErrors 1.3.6.1.4.1.1872.2.5.4.2.13.5
Total number of domain name parse errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dnsSlbStatFailedMatches 1.3.6.1.4.1.1872.2.5.4.2.13.6
Total number of failed real server name matches.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dnsSlbStatInternalErrors 1.3.6.1.4.1.1872.2.5.4.2.13.7
Total number of DNS parsing internal errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatsClear 1.3.6.1.4.1.1872.2.5.4.2.15
This is an action object to clear the non-operational SLB statistics. ok(1) is returned when read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ok(1), clear(2)  

slbStatAuxSessTable 1.3.6.1.4.1.1872.2.5.4.2.17
The auxiliary session table statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbStatAuxSessEntry

slbStatAuxSessEntry 1.3.6.1.4.1.1872.2.5.4.2.17.1
The statistics of a particular auxiliary session table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbStatAuxSessEntry  

slbStatAuxSessIndex 1.3.6.1.4.1.1872.2.5.4.2.17.1.1
The auxiliary session table number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbStatAuxSessCurConn 1.3.6.1.4.1.1872.2.5.4.2.17.1.2
The number of connections in this auxiliary sessions table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

slbStatAuxSessMaxConn 1.3.6.1.4.1.1872.2.5.4.2.17.1.3
The maximum number of connections handled by this auxiliary session table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbStatAuxSessAllocFails 1.3.6.1.4.1.1872.2.5.4.2.17.1.4
The total number of allocation failures for this auxiliary session table.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sslSlbStatSessIdAllocFails 1.3.6.1.4.1.1872.2.5.4.2.16.1
The number of times allocation of a session table entry failed when attempting to store a SessionId in the table.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sslSlbStatCurSessions 1.3.6.1.4.1.1872.2.5.4.2.16.2
The current number of different TCP sessions using SSL service.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sslSlbStatTotalSessions 1.3.6.1.4.1.1872.2.5.4.2.16.3
The total number of different TCP sessions using SSL service.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sslSlbStatHighestSessions 1.3.6.1.4.1.1872.2.5.4.2.16.4
The high water mark of current sessions of different TCP sessions using SSL service.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sslSlbStatUniqCurSessions 1.3.6.1.4.1.1872.2.5.4.2.16.5
The current number of unique SSL sessions seen on the switch.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sslSlbStatUniqTotalSessions 1.3.6.1.4.1.1872.2.5.4.2.16.6
The total number of unique SSL sessions seen on the switch.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sslSlbStatUniqHighestSessions 1.3.6.1.4.1.1872.2.5.4.2.16.7
The high water mark of unique SSL sessions seen on the switch.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sslSlbStatPersistPortCurSessions 1.3.6.1.4.1.1872.2.5.4.2.16.8
The current number of SessionIds maintained on SP 4, to allow for persistence across different client ports.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sslSlbStatPersistPortTotalSessions 1.3.6.1.4.1.1872.2.5.4.2.16.9
The total number of SessionIds maintained on SP 4, to allow for persistence across different client ports.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sslSlbStatPersistPortHighestSessions 1.3.6.1.4.1.1872.2.5.4.2.16.10
The high water mask of SessionIds maintained on SP 4, to allow for persistence across different client ports.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatVirtServiceTable 1.3.6.1.4.1.1872.2.5.4.2.18
The virtual service statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbStatVirtServiceEntry

slbStatVirtServiceEntry 1.3.6.1.4.1.1872.2.5.4.2.18.1
The statistics of a particular virtual service.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbStatVirtServiceEntry  

slbStatVirtServerIndex 1.3.6.1.4.1.1872.2.5.4.2.18.1.1
The virtual server number that identifies the service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbStatVirtServiceIndex 1.3.6.1.4.1.1872.2.5.4.2.18.1.2
The virtual service number that identifies the service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbStatRealServerIndex 1.3.6.1.4.1.1872.2.5.4.2.18.1.3
The real server index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbStatVirtServiceCurrSessions 1.3.6.1.4.1.1872.2.5.4.2.18.1.4
The number of sessions that are currently handled by the virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

slbStatVirtServiceTotalSessions 1.3.6.1.4.1.1872.2.5.4.2.18.1.5
The total number of sessions that are handled by the virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatVirtServiceHighestSessions 1.3.6.1.4.1.1872.2.5.4.2.18.1.6
The highest sessions that have been handled by the virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatVirtServiceHCOctetsLow32 1.3.6.1.4.1.1872.2.5.4.2.18.1.7
The lower 32 bit value of octets received and transmitted out of the virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatVirtServiceHCOctetsHigh32 1.3.6.1.4.1.1872.2.5.4.2.18.1.8
The higher 32 bit value of octets received and transmitted out of the virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatVirtServiceHCOctets 1.3.6.1.4.1.1872.2.5.4.2.18.1.9
The total octets received and transmitted by the virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sipTotalClientParseErrors 1.3.6.1.4.1.1872.2.5.4.2.20.1
Total number of SIP Client parse Errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sipTotalServerParseErrors 1.3.6.1.4.1.1872.2.5.4.2.20.2
Total number of SIP Server parse Errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sipTotalUnknownMethodReq 1.3.6.1.4.1.1872.2.5.4.2.20.3
Total number of SIP unknown method requests.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sipTotalIncompleteMsgs 1.3.6.1.4.1.1872.2.5.4.2.20.4
Total number of SIP Incomplete messages.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sipTotalSdpNatPackets 1.3.6.1.4.1.1872.2.5.4.2.20.5
Total number of SDP NAT packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlmStats 1.3.6.1.4.1.1872.2.5.4.2.21
OBJECT IDENTIFIER    

slbStatWlmTable 1.3.6.1.4.1.1872.2.5.4.2.21.1
The WLM statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbStatWlmEntry

slbStatWlmEntry 1.3.6.1.4.1.1872.2.5.4.2.21.1.1
The statistics of a particular work load manager.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbStatWlmEntry  

slbStatWlmIndex 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.1
The work load manager number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbStatWlmRegReq 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.2
Total number of registration request messages sent by the switch.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatWlmRegRep 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.3
Total number of registration replies received from the GWM.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatWlmRegRepErr 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.4
Total number of registration replies received where the return code indicates an error.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatWlmDeregReq 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.5
Total number of deregistration request messages sent by the switch.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatWlmDeregRep 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.6
Total number of deregistration replies received from the GWM.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatWlmDeregRepErr 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.7
Total number of deregistration replies received where the return code flag set indicating an error in processing of the deregistration request.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatWlmLbStateReq 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.8
Total number of set LB state request messages sent by the switch.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatWlmLbStateRep 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.9
Total number of set LB state replies received from the GWM.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatWlmLbStateRepErr 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.10
Total number of set LB state replies received where the return code code flag set indicating an error in processing of the set LB state request.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatWlmMembStateReq 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.11
Total number of set member state request messages sent by the switch.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatWlmMembStateRep 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.12
Total number of set member state replies received from the GWM.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatWlmMembStateRepErr 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.13
Total number of set member state replies received where the return code code flag set indicating an error in processing of the set member state request.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatWlmWtMsgRecv 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.14
Total number of weight updates received from the GWM.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatWlmWtMsgParErr 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.15
Total number of errorsencountered during parsing of the send weights message.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatWlmTotInvalidLb 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.16
This counter is incremented when the LB name in send weights message does not match the switch LB name.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatWlmTotInvalidGrp 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.17
This counter is incremented when the group name in send weights message does not match with any of the groups configured on the switch.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatWlmTotInvalidRealSer 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.18
This counter is incremented when the real server name in send weights message does not match with any of the reals configured on the switch.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatWlmMsgInvalidSASPHeader 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.19
Total number of messages received from the GWM with invalid headers.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatWlmMsgParseErr 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.20
Total number of parse errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatWlmMsgUnsupMsgType 1.3.6.1.4.1.1872.2.5.4.2.21.1.1.21
Total messages received where the message type is not supported by the switch.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sessMirrorTotalCreateSessionMsgRx 1.3.6.1.4.1.1872.2.5.4.2.22.1
Total number of create session messages received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sessMirrorTotalCreateSessionMsgTx 1.3.6.1.4.1.1872.2.5.4.2.22.2
Total number of create session messages transmitted .
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sessMirrorTotalCreateDataSessionMsgRx 1.3.6.1.4.1.1872.2.5.4.2.22.3
Total number of create data session messages received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sessMirrorTotalCreateDataSessionMsgTx 1.3.6.1.4.1.1872.2.5.4.2.22.4
Total number of create data session messages transmitted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sessMirrorTotalUpdateSessionMsgRx 1.3.6.1.4.1.1872.2.5.4.2.22.5
Total number of update session messages received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sessMirrorTotalUpdateSessionMsgTx 1.3.6.1.4.1.1872.2.5.4.2.22.6
Total number of update session messages transmitted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sessMirrorTotalUpdateDataSessionMsgRx 1.3.6.1.4.1.1872.2.5.4.2.22.7
Total number of update data session messages received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sessMirrorTotalUpdateDataSessionMsgTx 1.3.6.1.4.1.1872.2.5.4.2.22.8
Total number of update data session messages transmitted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sessMirrorTotalDeleteSessionMsgRx 1.3.6.1.4.1.1872.2.5.4.2.22.9
Total number of delete session messages received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sessMirrorTotalDeleteSessionMsgTx 1.3.6.1.4.1.1872.2.5.4.2.22.10
Total number of delete session messages transmitted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sessMirrorTotalDeleteDataSessionMsgRx 1.3.6.1.4.1.1872.2.5.4.2.22.11
Total number of delete data session messages received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sessMirrorTotalDeleteDataSessionMsgTx 1.3.6.1.4.1.1872.2.5.4.2.22.12
Total number of delete data session messages transmitted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sessMirrorTotalSessionsCreated 1.3.6.1.4.1.1872.2.5.4.2.22.13
Total number of sessions created.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sessMirrorTotalDataSessionsCreated 1.3.6.1.4.1.1872.2.5.4.2.22.14
Total number of data sessions created.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sessMirrorTotalSessionsUpdated 1.3.6.1.4.1.1872.2.5.4.2.22.15
Total number of sessions updated.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sessMirrorTotalDataSessionsUpdated 1.3.6.1.4.1.1872.2.5.4.2.22.16
Total number of data sessions updated.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sessMirrorTotalSessionsDeleted 1.3.6.1.4.1.1872.2.5.4.2.22.17
Total number of sessions deleted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sessMirrorTotalDataSessionsDeleted 1.3.6.1.4.1.1872.2.5.4.2.22.18
Total number of data sessions deleted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sessMirrorSessionTableFullErr 1.3.6.1.4.1.1872.2.5.4.2.22.19
Error indicates session table full.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sessMirrorNoPortErr 1.3.6.1.4.1.1872.2.5.4.2.22.20
Error indicates unavailable port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sessMirrorSessionPresentErr 1.3.6.1.4.1.1872.2.5.4.2.22.21
Error indicates session already present.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sessMirrorSessionNotFoundErr 1.3.6.1.4.1.1872.2.5.4.2.22.22
Error indicates session not found.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sessMirrorCtrlSessionNotFoundErr 1.3.6.1.4.1.1872.2.5.4.2.22.23
Error indicates control session not found.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbRealServerInfoTable 1.3.6.1.4.1.1872.2.5.4.3.1
The table of real server run-time information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbRealServerInfoEntry

slbRealServerInfoEntry 1.3.6.1.4.1.1872.2.5.4.3.1.1
A row in the real server information table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbRealServerInfoEntry  

slbRealServerInfoIndex 1.3.6.1.4.1.1872.2.5.4.3.1.1.1
The real server index
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbRealServerInfoIpAddr 1.3.6.1.4.1.1872.2.5.4.3.1.1.2
IP address of the real server.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slbRealServerMacAddr 1.3.6.1.4.1.1872.2.5.4.3.1.1.3
The MAC address of the real server.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

slbRealServerInfoSwitchPort 1.3.6.1.4.1.1872.2.5.4.3.1.1.4
The switch port that the real server is connected to.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbRealServerInfoHealthLayer 1.3.6.1.4.1.1872.2.5.4.3.1.1.5
The OSI layer at which the real server functionality is verified.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER layer1(1), layer3(3), layer4(4)  

slbRealServerInfoOverflow 1.3.6.1.4.1.1872.2.5.4.3.1.1.6
The overflow state of the real server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER overflow(1), no-overflow(2)  

slbRealServerInfoState 1.3.6.1.4.1.1872.2.5.4.3.1.1.7
The state of the real server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER running(2), failed(3), disabled(4)  

slbRealServerInfoVlan 1.3.6.1.4.1.1872.2.5.4.3.1.1.8
The VLAN that the real server belongs to.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbRealServerRportInfoTable 1.3.6.1.4.1.1872.2.5.4.3.3
The table of real server rport run-time information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbRealServerRportInfoEntry

slbRealServerRportInfoEntry 1.3.6.1.4.1.1872.2.5.4.3.3.1
A row in the real server rport information table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbRealServerRportInfoEntry  

slbRealServerRportRealIndex 1.3.6.1.4.1.1872.2.5.4.3.3.1.1
The real server index
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbRealServerRportServIndex 1.3.6.1.4.1.1872.2.5.4.3.3.1.2
The real server service index
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbRealServerRportInfoRport 1.3.6.1.4.1.1872.2.5.4.3.3.1.3
The real server real port number
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbRealServerRportInfoState 1.3.6.1.4.1.1872.2.5.4.3.3.1.4
The state of the real server port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), slowstart(3)  

slbRealServerRportInfoGroup 1.3.6.1.4.1.1872.2.5.4.3.3.1.5
The real server group number.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbVirtServicesInfoTable 1.3.6.1.4.1.1872.2.5.4.3.4
The table of virtual server services run-time information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbVirtServicesInfoEntry

slbVirtServicesInfoEntry 1.3.6.1.4.1.1872.2.5.4.3.4.1
A row in the virtual service information table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbVirtServicesInfoEntry  

slbVirtServicesInfoVirtServIndex 1.3.6.1.4.1.1872.2.5.4.3.4.1.1
The virtual server index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbVirtServicesInfoSvcIndex 1.3.6.1.4.1.1872.2.5.4.3.4.1.2
The virtual service index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbVirtServicesInfoRealServIndex 1.3.6.1.4.1.1872.2.5.4.3.4.1.3
The real server index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbVirtServicesInfoVport 1.3.6.1.4.1.1872.2.5.4.3.4.1.4
The layer 4 virtual port number for the service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbVirtServicesInfoRport 1.3.6.1.4.1.1872.2.5.4.3.4.1.5
The layer 4 real port number for the service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbVirtServicesInfoState 1.3.6.1.4.1.1872.2.5.4.3.4.1.6
The state of the real server for this virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER blocked(1), running(2), failed(3), disabled(4), slowstart(5)  

slbVirtServicesInfoResponseTime 1.3.6.1.4.1.1872.2.5.4.3.4.1.7
The health check response time for the real server for this virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbVirtServicesInfoWeight 1.3.6.1.4.1.1872.2.5.4.3.4.1.8
The real server weight.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbSessionInfo 1.3.6.1.4.1.1872.2.5.4.3.5
OBJECT IDENTIFIER    

slbSessionInfoState 1.3.6.1.4.1.1872.2.5.4.3.5.1
When this object is read the current state is returned. idle(2) indicates that there is no session binding table request in progress. When a read on this object returns inprogress(3) indicates that a session binding table retrieval request is in progress. Setting the value to start(1), will start a new session table retrieval operation based on the filtering criteria. complete(4) indicates that the session table has been retrieved. Once the slbSessionInfoTable is read the state should be set back to 'idle' which frees the session table buffer and others can issue a request command via SNMP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER start(1), idle(2), inprogress(3), complete(4)  

slbSessionInfoType 1.3.6.1.4.1.1872.2.5.4.3.5.2
This identifies the filtering criteria for the session binding table request. all(1) : Show all session entries cip(2) : Show all session entries with source IP address cport(3) : Show all session entries with source port dip(4) : Show all session entries with destination IP address dport(5) : Show all session entries with destination port pip(6) : Show all session entries with proxy IP address pport(7) : Show all session entries with proxy port filter(8): Show all session entries with matching filter flag(9) : Show all session entries with matching flag port(10) : Show all session entries with ingress port real(11) : Show all session entries with real IP address.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER all(1), cip(2), cport(3), dip(4), dport(5), pip(6), pport(7), filter(8), flag(9), port(10), real(11)  

slbSessionInfoIpAddr 1.3.6.1.4.1.1872.2.5.4.3.5.3
IP address of the requested filtering criteria 0.0.0.0 if the filtering criteria is not to match session entries with the same IP address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

slbSessionInfoFilterId 1.3.6.1.4.1.1872.2.5.4.3.5.4
This field indicates that the session is created by filtering code as a result of the IP header keys matching the filtering criteria. 0 if slbSessionInfoFilterID is not the matching criteria.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

slbSessionInfoPortId 1.3.6.1.4.1.1872.2.5.4.3.5.5
The if the filtering criteria is (port) to match all session entries with the matching ingress port or this represents the if the requested filtering criteria is to match session entries with (pport) proxy port, (cport) source port, (dport) destination port, This entry is 0 if the filtering criteria is not to match session entries with the same port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

slbSessionInfoFlag 1.3.6.1.4.1.1872.2.5.4.3.5.6
If the filtering criteria is flag select one of e|l|n|p|s|t|u|w(Flag) none(20) is selected if flag is not the fitering criteria. eFlag: Indicates the session is in use and will be aged out if no traffic is received within session timeout value. lFlag: Indicates the session is a link load balance session. nFlag: Indicates the session only translates the destination MAC when forwarding client traffic to the real server. pFlag: Indicates the session is a persistent session and is not to be aged out. Fields (6), (7) and (8) are not shown for persistent session. sFlag: Indicates the session is a persistent session and the application is SSL or Cookie Pbind. tFlag: Indicates the session is TCP rate limiting per-client entry. uFlag: Indicates the session is L7 delay binding and switch is trying to open TCP connection to real server. wFlag: Indicates the session only translates the destination MAC when forwarding layer 7 WCR traffic to the real server. ruFlag: Indicates the session is a UDP rate limiting per-client entry. riFlag: Indicates the session is a ICMP rate limiting per-client entry. viFlag: Indicates the session is a SIP INVITE session. vrFlag: Indicates the session is a SIP REGISTER session. vsFlag: Indicates the session is a SIP SUBSCRIBE session. vmFlag: Indicates the session is a SIP MESSAGE session. vdFlag: Indicates the session is a SIP NAT data session.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER eFlag(1), lFlag(2), nFlag(3), pFlag(4), sFlag(5), tFlag(6), uFlag(7), wFlag(8), ruFlag(9), riFlag(10), viFlag(11), vrFlag(12), vsFlag(13), vmFlag(14), vdFlag(15), none(20)  

slbSessionInfoStringFormatFlag 1.3.6.1.4.1.1872.2.5.4.3.5.7
The flag which determines if the session table entries have to be formatted or (none) indicates no formatting to be done.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER formatted(1), none(2)  

slbSessionInfoMaxSessDump 1.3.6.1.4.1.1872.2.5.4.3.5.9
The maximum number of sessions that can exist at any given time.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbSessionInfoTable 1.3.6.1.4.1.1872.2.5.4.3.5.8
The table of SLB session entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbSessionInfoEntry

slbSessionInfoEntry 1.3.6.1.4.1.1872.2.5.4.3.5.8.1
Information about SLB sessions.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbSessionInfoEntry  

slbSessionInfoSpIndex 1.3.6.1.4.1.1872.2.5.4.3.5.8.1.1
The SP which created the session.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbSessionInfoIndex 1.3.6.1.4.1.1872.2.5.4.3.5.8.1.2
The index to the slbSessionInfoTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbSessionInfoString 1.3.6.1.4.1.1872.2.5.4.3.5.8.1.3
The string representing the SLB session entries in the formatted case: The fields, (1)-(13), associated with a session, as identified in the example below are described in the following. 3, 01: 1.1.1.1 4586, 2.2.2.1 http -> 3567 3.3.3.1 http age 6 f:10 ELNPSRtUW c:# (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) 3, 01: 1.1.1.1 4586, 2.2.2.1 http -> (1) (2) (3) (4) (5) (6) 1.1.1.2 3567 3.3.3.1 http age 6 f:10 ELNPSRtUW c:# (7a) (7) (8) (9) (10) (11) (12) (13) ------------------------------------------------------------------ (1) SP number: This field indicates which SP created the session. (2) Ingress port: This field shows the physical port# of the client traffic that entered to the switch. (3) Source IP address: This field contains the source IP address from client IP packet. (4) Source port: This field identifies the TCP/UDP source port from client packet. (5) Destination IP address: This is the destination IP address from client TCP/UDP packet. For load balancing, this address is the virtual IP address. For filtering redirect, this address is the destination server's address. (6) Destination port: This field identifies the TCP/UDP destination port from client packet. (7a)Proxy IP address: This field contains the proxy IP address substituted by the switch. (7) Proxy port: This field identifies the TCP/UDP source port substituted by the switch. The switch does this substitution when Direct Access Mode is enabled or Proxy is enabled. (8) Real server IP address: For load balancing, this field contains the IP address of the real server that the switch selects to forward client packet to. If the switch does not find live server, this field is the same as destination IP address(5). e.g. 3,01: 1.1.1.1 1040, 2.2.2.1 http -> 3.3.3.1 http age 10 3,01: 1.1.1.1 1040, 2.2.2.1 http -> 2.2.2.1 http age 10 For filtering, this field also shows the real server IP address. No address is shown if the filter action is Allow, Deny or NAT. It will show ALLOW, DENY or NAT instead. e.g. 3,01: 1.1.1.1 1040, 2.2.2.1 http -> 3.3.3.1 http age 10 f:11 3,01: 1.1.1.1 1040, 2.2.2.1 http ALLOW age 10 f:22 (9) Server port: For load balancing, this field is the same as destination port(6) except for the RTSP UDP session. For RTSP UDP session, this server port is obtained from client-server negotiation. e.g. 3,01: 1.1.1.1 1040, 2.2.2.1 http -> 3.3.3.1 http age 10 3,01: 1.1.1.1 6970, 2.2.2.1 rtsp -> 3.3.3.1 21220 age 10 P For filtering, this field is the filtering application port. It is for internal use only. This field can be urlwcr, wcr, idslb, linkslb or nonat. e.g. 3,01: 1.1.1.1 1040, 2.2.2.1 http -> 3.3.3.1 urlwcr age 4 f:123 2,07: 1.1.1.1 1706, 2.2.2.1 http -> 192.168.4.10 linklb age 8 f:10 E (10) Age: This is the session timeout value. If no packet is received within the value specified, the session is freed. e.g. age 10 - The session is aged out in 10 minutes. age < 160 - The session is aged out in 160 minutes. This < indicates that slowage is used(user configures /cfg/slb/adv/slowage) (11) Filter number: This field indicates that the session is created by filtering code as a result of the IP header keys matching the filtering criteria. (12) Flag: E: Indicates the session is in use and will be aged out if no traffic is received within session timeout value. L: Indicates the session is a link load balance session. N: Indicates the session only translates the destination MAC when forwarding client traffic to the real server. P: Indicates the session is a persistent session and is not to be aged out. Fields (6), (7) and (8) are not shown for persistent session. S: Indicates the session is a persistent session and the application is SSL or Cookie Pbind. Rt: Indicates the session is TCP rate limiting per-client entry. Ru: Indicates the session is UDP rate limiting per-client entry. Ri: Indicates the session is ICMP rate limiting per-client entry. U: Indicates the session is L7 delay binding and switch is trying to open TCP connection to real server. W: Indicates the session only translates the destination MAC when forwarding layer 7 WCR traffic to the real server. (13) Persistent session user count: This counter indicates the number of client sessions created associated with this persistent session.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

gslbInfo 1.3.6.1.4.1.1872.2.5.4.3.6
OBJECT IDENTIFIER    

gslbInfoRemRealServerTable 1.3.6.1.4.1.1872.2.5.4.3.6.1
The Global SLB virtual server information table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GslbInfoRemRealServerEntry

gslbInfoRemRealServerEntry 1.3.6.1.4.1.1872.2.5.4.3.6.1.1
A row in the Global SLB remote real server information table.
Status: current Access: not-accessible
OBJECT-TYPE    
  GslbInfoRemRealServerEntry  

gslbInfoRemRealServerIdx 1.3.6.1.4.1.1872.2.5.4.3.6.1.1.1
The remote real server number that identifies the remote real server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbInfoRemRealServerIpAddr 1.3.6.1.4.1.1872.2.5.4.3.6.1.1.2
IP address of the remote real server.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

gslbInfoRemRealServerName 1.3.6.1.4.1.1872.2.5.4.3.6.1.1.3
The name of the remote real server.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

gslbInfoRemRealServerState 1.3.6.1.4.1.1872.2.5.4.3.6.1.1.4
The state of the remote real server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER running(2), failed(3), disabled(4)  

gslbInfoVirtServerTable 1.3.6.1.4.1.1872.2.5.4.3.6.2
The Global SLB virtual server information table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GslbInfoVirtServerEntry

gslbInfoVirtServerEntry 1.3.6.1.4.1.1872.2.5.4.3.6.2.1
A row in the Global SLB virtual server information table.
Status: current Access: not-accessible
OBJECT-TYPE    
  GslbInfoVirtServerEntry  

gslbInfoVirtServerIdx 1.3.6.1.4.1.1872.2.5.4.3.6.2.1.1
The virtual server number that identifies the virtual server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbInfoVirtServerServiceIdx 1.3.6.1.4.1.1872.2.5.4.3.6.2.1.2
The virtual server service number that identifies the virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbInfoVirtServerRserverIdx 1.3.6.1.4.1.1872.2.5.4.3.6.2.1.3
The real server number that identifies a remote real server. An index of 0 indicates virtual server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbInfoVirtServerDname 1.3.6.1.4.1.1872.2.5.4.3.6.2.1.4
The domain name of the virtual server and remote real server.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

gslbInfoVirtServerVirtPort 1.3.6.1.4.1.1872.2.5.4.3.6.2.1.5
The service port of the virtual server and remote real server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbInfoVirtServerIpAddress 1.3.6.1.4.1.1872.2.5.4.3.6.2.1.6
The IP address of the virtual server or remote real server.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

gslbInfoVirtServerResponse 1.3.6.1.4.1.1872.2.5.4.3.6.2.1.7
The health check response time of the virtual server or remote real server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbInfoVirtServerSessAvail 1.3.6.1.4.1.1872.2.5.4.3.6.2.1.8
The available sessions of the virtual server or remote real server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbInfoVirtServerSessCur 1.3.6.1.4.1.1872.2.5.4.3.6.2.1.9
The current sessions of the virtual server or remote real server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbInfoVirtServerSessMax 1.3.6.1.4.1.1872.2.5.4.3.6.2.1.10
The maximum sessions supported by the virtual server or remote real server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbInfoVirtServerSessUtil 1.3.6.1.4.1.1872.2.5.4.3.6.2.1.11
The sessions utilization (current/max) of the virtual server or remote real server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..100  

gslbInfoVirtServerCpuUtil 1.3.6.1.4.1.1872.2.5.4.3.6.2.1.12
The CPU utilization of the virtual server or remote real server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..100  

gslbInfoVirtServerRemSite 1.3.6.1.4.1.1872.2.5.4.3.6.2.1.13
The remote site of the remote real server. For virtual server, the remote site is 0.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbInfoVirtServerWeight 1.3.6.1.4.1.1872.2.5.4.3.6.2.1.14
The weight of the virtual server or remote real server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..48  

gslbInfoVirtServerAvail 1.3.6.1.4.1.1872.2.5.4.3.6.2.1.15
The availability of the virtual server or remote real server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..48  

gslbInfoVirtServerRegion 1.3.6.1.4.1.1872.2.5.4.3.6.2.1.16
The region of the virtual server or remote real server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), northamerica(1), southamerica(2), europe(3), caribbean(4), pacificrim(5), subsahara(6), japan(7), caribbeansubsahara(8), africa(9)  

gslbInfoRemSiteTable 1.3.6.1.4.1.1872.2.5.4.3.6.3
The Global SLB remote site information table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GslbInfoRemSiteEntry

gslbInfoRemSiteEntry 1.3.6.1.4.1.1872.2.5.4.3.6.3.1
A row in the Global SLB remote site information table.
Status: current Access: not-accessible
OBJECT-TYPE    
  GslbInfoRemSiteEntry  

gslbInfoRemSiteIdx 1.3.6.1.4.1.1872.2.5.4.3.6.3.1.1
The remote site number that identifies the remote site.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gslbInfoRemSitePrimaryIp 1.3.6.1.4.1.1872.2.5.4.3.6.3.1.2
The primary IP address of the remote site.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

gslbInfoRemSiteSecondaryIp 1.3.6.1.4.1.1872.2.5.4.3.6.3.1.3
The secondary IP address of the remote site.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

gslbInfoRemSiteName 1.3.6.1.4.1.1872.2.5.4.3.6.3.1.4
The name of the remote site.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

gslbInfoRemSiteState 1.3.6.1.4.1.1872.2.5.4.3.6.3.1.5
The state of the remote site.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER running(2), failed(3), disabled(4)  

gslbInfoDnsSec 1.3.6.1.4.1.1872.2.5.4.3.6.4
OBJECT IDENTIFIER    

gslbInfoDnsSecKey 1.3.6.1.4.1.1872.2.5.4.3.6.4.2
OBJECT IDENTIFIER    

gslbInfoDnsSecKeyTable 1.3.6.1.4.1.1872.2.5.4.3.6.4.2.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GslbInfoDnsSecKeyEntry

gslbInfoDnsSecKeyEntry 1.3.6.1.4.1.1872.2.5.4.3.6.4.2.1.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  GslbInfoDnsSecKeyEntry  

gslbInfoDnsSecKeyID 1.3.6.1.4.1.1872.2.5.4.3.6.4.2.1.1.1
DNS Sec Table Key.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

gslbInfoDnsSecKeyStatus 1.3.6.1.4.1.1872.2.5.4.3.6.4.2.1.1.4
Key status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER initRollProess(1), newKeyCreated(2), newZskKeyDeployed(3), oldKeyRemoval(4), retrDsFromParent(5), newKskKeyDeployed(6), waitDsChangeOnParent(7), rolloverNotRunning(8), invalid(9), expired(10)  

wlmInfo 1.3.6.1.4.1.1872.2.5.4.3.7
OBJECT IDENTIFIER    

slbWlmInfoTable 1.3.6.1.4.1.1872.2.5.4.3.7.1
The table of workload manager run-time information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbWlmInfoEntry

slbWlmInfoEntry 1.3.6.1.4.1.1872.2.5.4.3.7.1.1
A row in the workload manager information table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbWlmInfoEntry  

slbWlmInfoIndex 1.3.6.1.4.1.1872.2.5.4.3.7.1.1.1
The workload manager index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbWlmInfoIpAddr 1.3.6.1.4.1.1872.2.5.4.3.7.1.1.2
IP address of the workload manager.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slbWlmInfoPort 1.3.6.1.4.1.1872.2.5.4.3.7.1.1.3
The port number of the workload manager.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65534  

slbWlmInfoState 1.3.6.1.4.1.1872.2.5.4.3.7.1.1.4
The state of the workload manager.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER connected(1), notconnected(2)  

slbPortInfo 1.3.6.1.4.1.1872.2.5.4.3.8
OBJECT IDENTIFIER    

slbPortInfoTable 1.3.6.1.4.1.1872.2.5.4.3.8.1
The table of port information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbPortInfoEntry

slbPortInfoEntry 1.3.6.1.4.1.1872.2.5.4.3.8.1.1
A row in the port information table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbPortInfoEntry  

slbPortInfoIndex 1.3.6.1.4.1.1872.2.5.4.3.8.1.1.1
Index of slb port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbPortClientState 1.3.6.1.4.1.1872.2.5.4.3.8.1.1.2
Client state on the slb port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbPortSerState 1.3.6.1.4.1.1872.2.5.4.3.8.1.1.3
Server state on the slb port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbPortFltState 1.3.6.1.4.1.1872.2.5.4.3.8.1.1.4
Filter state on the slb port .
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbPortRTSState 1.3.6.1.4.1.1872.2.5.4.3.8.1.1.5
RTS processing state on the slb port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbPortHotStandbyState 1.3.6.1.4.1.1872.2.5.4.3.8.1.1.6
Hot standby state on the slb port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbPortInterSWState 1.3.6.1.4.1.1872.2.5.4.3.8.1.1.7
Inter-switch processing state on the slb port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbPortProxyState 1.3.6.1.4.1.1872.2.5.4.3.8.1.1.8
Proxy state on the slb port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbPortIdSlbState 1.3.6.1.4.1.1872.2.5.4.3.8.1.1.9
Intrusion detection server load balancing state on the slb port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbPortSymantecState 1.3.6.1.4.1.1872.2.5.4.3.8.1.1.10
Symantec Processing state on the slb port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbPortFitersAdded 1.3.6.1.4.1.1872.2.5.4.3.8.1.1.11
The filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ filter 9 || || || ||___ filter 8 || |____ filter 7 || . . . ||_________ filter 2 |__________ filter 1 where x : 1 - The represented filter rule applied to the port 0 - The represented filter rule not applied to the port.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

synAttackInfo 1.3.6.1.4.1.1872.2.5.4.3.9
OBJECT IDENTIFIER    

synAtkState 1.3.6.1.4.1.1872.2.5.4.3.9.1
State of the Syn Attack, represents whether it is running or not.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

synAtkInterval 1.3.6.1.4.1.1872.2.5.4.3.9.2
Specifies interval period of syn attack inspection in seconds, it returns 0 if synAtk is OFF.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

synAtkThreshhold 1.3.6.1.4.1.1872.2.5.4.3.9.3
Specifies threshold of syn attack alram, it returns 0 if synAtk is OFF .
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

synAtkWarningFired 1.3.6.1.4.1.1872.2.5.4.3.9.4
Specifies number of times syn attack warnings fired.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

synAtkResponseInterval 1.3.6.1.4.1.1872.2.5.4.3.9.5
Specifies interval period of syn cookie generation in milliseconds, it returns 0 if synAtk is OFF.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

synAtkOnOff 1.3.6.1.4.1.1872.2.5.4.3.9.6
Globaly set SYN Protection ON/FF.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

slbFreeVirtualServerIndexInfo 1.3.6.1.4.1.1872.2.5.4.3.10
Retrieve the next virtual server index
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbFreeRealGroupIndexInfo 1.3.6.1.4.1.1872.2.5.4.3.11
Retrieve the next server group index
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbFreeRealServerIndexInfo 1.3.6.1.4.1.1872.2.5.4.3.12
Retrieve the next real server index
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbOperRealServerTable 1.3.6.1.4.1.1872.2.5.4.4.1
The table of real servers.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbOperRealServerEntry

slbOperRealServerEntry 1.3.6.1.4.1.1872.2.5.4.4.1.1
A row in the slbOperRealServerTable
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbOperRealServerEntry  

slbOperRealServerIndex 1.3.6.1.4.1.1872.2.5.4.4.1.1.1
The index for the real server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbOperRealServerStatus 1.3.6.1.4.1.1872.2.5.4.4.1.1.2
This an action object which is used to temporarily enable/disable a real server. The real server will be returned to its configured operational mode when the switch is reset. Setting the value to 'cookiepersistant' allows cookie persistent HTTP 1.0 sessions when the real server is offline.'fastage' option is for removing the existing sessions. And 'cookiepersistentfastage' allows cookie persistent sessions and remove the existing sessions when real server is offline.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), cookiepersistent(3), fastage(4), cookiepersistentfastage(5)  

slbOperClearSessionTable 1.3.6.1.4.1.1872.2.5.4.4.2
This is an action object to clear session binding table. ok(1) is returned when read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ok(1), clear(2)  

slbOperConfigSync 1.3.6.1.4.1.1872.2.5.4.4.3
When set to a value of 'sync(2)' it synchronizes the SLB, filter and VRRP configuration on a peer switch. To take effect, peers must be configured on the switches and the administrator password on the switches must be identical. 'ok(1)' is returned when the object os read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ok(1), sync(2)  

gslbOper 1.3.6.1.4.1.1872.2.5.4.4.4
OBJECT IDENTIFIER    

gslbOperQuery 1.3.6.1.4.1.1872.2.5.4.4.4.1
OBJECT IDENTIFIER    

gslbOperAdd 1.3.6.1.4.1.1872.2.5.4.4.4.2
OBJECT IDENTIFIER    

gslbOperRemove 1.3.6.1.4.1.1872.2.5.4.4.4.3
This is an action object to Remove all entries from Global SLB DNS persistence cache. ok(1) is returned when read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ok(1), remove(2)  

gslbOperAvPersis 1.3.6.1.4.1.1872.2.5.4.4.4.4
OBJECT IDENTIFIER    

gslbOperClear 1.3.6.1.4.1.1872.2.5.4.4.4.5
This is an action object when we set to a value of(2) it clear the client cache of dynamic entries. ok(1) is returned when read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ok(1), clear(2)  

gslbOperDnsSec 1.3.6.1.4.1.1872.2.5.4.4.4.6
OBJECT IDENTIFIER    

gslbOperDnsSecTable 1.3.6.1.4.1.1872.2.5.4.4.4.6.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GslbOperDnsSecEntry

gslbOperDnsSecEntry 1.3.6.1.4.1.1872.2.5.4.4.4.6.1.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  GslbOperDnsSecEntry  

gslbOperDnsSecKeyID 1.3.6.1.4.1.1872.2.5.4.4.4.6.1.1.1
DNS Sec Table Key.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

gslbOperDnsSecEmergencyRollover 1.3.6.1.4.1.1872.2.5.4.4.4.6.1.1.2
By setting the value to rollover(2), DNSSEC emergency rollover procedure of a key will be Performed.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), rollover(2)  

gslbOperDnsSecImmediateRollover 1.3.6.1.4.1.1872.2.5.4.4.4.6.1.1.3
By setting the value to rollover(2), DNSSEC immediate rollover procedure of a key will be Performed.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), rollover(2)  

gslbOperQueryDomain 1.3.6.1.4.1.1872.2.5.4.4.4.1.1
Domain to query Global SLB selection.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

gslbOperQuerySrcIp 1.3.6.1.4.1.1872.2.5.4.4.4.1.2
Source Ip Address to query Global SLB selection.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

gslbOperSendQuery 1.3.6.1.4.1.1872.2.5.4.4.4.1.3
Query Global SLB selection.When set to a value of Query(2) it sends Global SLB selection query.Ok(1) is returned when this object is read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ok(1), query(2)  

gslbOperQuerySrcIpV6 1.3.6.1.4.1.1872.2.5.4.4.4.1.4
Source Ip V6 Address to query Global SLB selection. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

gslbOperQuerySrcIpVer 1.3.6.1.4.1.1872.2.5.4.4.4.1.5
Source Ip Version to query Global SLB selection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2)  

gslbOperQueryType 1.3.6.1.4.1.1872.2.5.4.4.4.1.6
Global SLB selection Query Type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER a(1), aaaa(2)  

gslbOperAddDomain 1.3.6.1.4.1.1872.2.5.4.4.4.2.1
Domain to be added into Global SLB DNS Presistence cache.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

gslbOperAddSrcIp 1.3.6.1.4.1.1872.2.5.4.4.4.2.2
Source Ip Address to be added into Global SLB DNS Persistence cache.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

gslbOperAddServerIp 1.3.6.1.4.1.1872.2.5.4.4.4.2.3
Server Ip Address to be added into Global SLB DNS Persistence cache.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

gslbOperAddEntry 1.3.6.1.4.1.1872.2.5.4.4.4.2.4
Add entry to Global SLB DNS persistence cache. When set to a value of add(2) Entry will be added into Global SLB DNS persistence cache. Ok(1) is returned when object is read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ok(1), add(2)  

gslbOperAddSrcIp6 1.3.6.1.4.1.1872.2.5.4.4.4.2.5
Source Ip Address to be added into Global SLB DNS Persistence cache. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

gslbOperAddServerIp6 1.3.6.1.4.1.1872.2.5.4.4.4.2.6
Server IPV6 Address to be added into Global SLB DNS Persistence cache. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

gslbOperAvPersisVirtNum 1.3.6.1.4.1.1872.2.5.4.4.4.4.1
Enter Virtual Server Number for which GSLB availability persistence should be enabled/disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..1024  

gslbOperAvPersisState 1.3.6.1.4.1.1872.2.5.4.4.4.4.2
Enable or Disable GSLB availability persistence.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

gslbOperAvpersistence 1.3.6.1.4.1.1872.2.5.4.4.4.4.3
When we set to a value of 2(config),it enable/disable GSLB availability persistence for configures virtual server. Ok(1) is returned when this object is read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ok(1), config(2)  

slbOperGroupRealServerTable 1.3.6.1.4.1.1872.2.5.4.4.5
The table of real server per group.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbOperGroupRealServerEntry

slbOperGroupRealServerEntry 1.3.6.1.4.1.1872.2.5.4.4.5.1
A row in the Real server group table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbOperGroupRealServerEntry  

slbOperRealServGroupIndex 1.3.6.1.4.1.1872.2.5.4.4.5.1.1
The real server group index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbOperGroupRealServIndex 1.3.6.1.4.1.1872.2.5.4.4.5.1.2
The real server index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbOperGroupRealServerState 1.3.6.1.4.1.1872.2.5.4.4.5.1.3
This an action object which is used to temporarily enable/disable a real server in group. The real server will be returned to its configured operational mode when the switch is reset.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

slbOperSessionDel 1.3.6.1.4.1.1872.2.5.4.4.6
OBJECT IDENTIFIER    

slbOperSessionDelSrcIp 1.3.6.1.4.1.1872.2.5.4.4.6.1
Session Source IP Address to be deleted
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

slbOperSessionDelSrcPort 1.3.6.1.4.1.1872.2.5.4.4.6.2
Session Source Port to be deleted
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65534  

slbOperSessionDelDestIp 1.3.6.1.4.1.1872.2.5.4.4.6.3
Session Destination IP Address to be deleted
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

slbOperSessionDelDestPort 1.3.6.1.4.1.1872.2.5.4.4.6.4
Session Destination Port to be deleted
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65534  

slbOperSessionDelTransType 1.3.6.1.4.1.1872.2.5.4.4.6.5
Set a flag indicating whether Transport Type is TCP or UDP
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER tcp(1), udp(2)  

slbOperSessionDelete 1.3.6.1.4.1.1872.2.5.4.4.6.6
This is an action object to delete session table entry. when set to a value of delete(2) it deletes session table entry. Ok(1) is returned when object is read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ok(1), delete(2)  

slbOperHttpCachePurgeTable 1.3.6.1.4.1.1872.2.5.4.4.7
The table of services per server.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbOperHttpCachePurgeEntry

slbOperHttpCachePurgeEntry 1.3.6.1.4.1.1872.2.5.4.4.7.1
A row in the http cache purge service table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbOperHttpCachePurgeEntry  

slbOperHttpCachePurgeServerIndex 1.3.6.1.4.1.1872.2.5.4.4.7.1.1
The Http Cache purge server index.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..1024  

slbOperHttpCachePurgeServiceIndex 1.3.6.1.4.1.1872.2.5.4.4.7.1.2
The Http Cache purge service index.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 10..65534  

slbOperHttpCachePurgeURL 1.3.6.1.4.1.1872.2.5.4.4.7.1.3
Set object URL or all.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

ocspCachePurge 1.3.6.1.4.1.1872.2.5.4.4.8
OBJECT IDENTIFIER    

slbOperOcspCachePurge 1.3.6.1.4.1.1872.2.5.4.4.8.1
Client authentication policy id or All.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

slbCurCfgLinklbState 1.3.6.1.4.1.1872.2.5.4.1.1.16.1
Enable or disable Inbound Link load balancing.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgLinklbState 1.3.6.1.4.1.1872.2.5.4.1.1.16.2
Enable or disable Inbound Link load balancing.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgLinklbRealGroup 1.3.6.1.4.1.1872.2.5.4.1.1.16.3
The real server group number for Link load balancing.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbNewCfgLinklbRealGroup 1.3.6.1.4.1.1872.2.5.4.1.1.16.4
The real server group number for Link load balancing.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

slbCurCfgLinklbTTL 1.3.6.1.4.1.1872.2.5.4.1.1.16.6
Set Time to Live for DNS resource records.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

slbNewCfgLinklbTTL 1.3.6.1.4.1.1872.2.5.4.1.1.16.7
Set Time to Live for DNS resource records.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

slbLinklbDrecord 1.3.6.1.4.1.1872.2.5.4.1.1.16.5
OBJECT IDENTIFIER    

slbDrecordTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.1
The maximum number of entries in Drecord table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgDrecordTable 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.2
The table of Domain records for Inbound link load balancing in the current configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurCfgDrecordEntry

slbCurCfgDrecordEntry 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.2.1
A row in the Domain record table for Inbound Link Load balancing.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbCurCfgDrecordEntry  

slbCurCfgDrecordIndex 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.2.1.1
The index of the Domain record table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

slbCurCfgDomainRecordState 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.2.1.2
Enable/disable a domain record.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgDomainRecordName 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.2.1.3
The name of the domain record.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..34)  

slbNewCfgDrecordTable 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.3
The table of Domain records for Inbound link load balancing in the new configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewCfgDrecordEntry

slbNewCfgDrecordEntry 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.3.1
A row in the Domain record table for Inbound Link Load balancing.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbNewCfgDrecordEntry  

slbNewCfgDrecordIndex 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.3.1.1
The index of the Domain record table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

slbNewCfgDomainRecordState 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.3.1.2
Enable/disable a domain record.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgDomainRecordName 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.3.1.3
The name of the domain record.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..34)  

slbNewCfgDrecordDelete 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.3.1.4
By setting the value to delete(2), the entire row is deleted.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbDrecordVirtRealMappingTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.4
The maximum number of entries in Drecord Virtual Real server mapping Table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgDrecordVirtRealMappingTable 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.5
The table of Domain records and virtual server and real server mappings.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurCfgDrecordVirtRealMappingEntry

slbCurCfgDrecordVirtRealMappingEntry 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.5.1
A row in the Domain record and virtual/real server mapping table for Inbound Link Load balancing.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbCurCfgDrecordVirtRealMappingEntry  

slbCurCfgDomainRecordIndex 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.5.1.1
The number of the domain record.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

slbCurCfgEntryIndex 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.5.1.2
The number of the entry virtual real server mapping.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

slbCurCfgDrecordVirtServer 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.5.1.3
The virtual server number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgDrecordRealServer 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.5.1.4
The Real server number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgDrecordEntryState 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.5.1.5
Enable/disable a mapping in this table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgDrecordVirtRealMappingTable 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.6
The table of Domain records and virtual server and real server mappings.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewCfgDrecordVirtRealMappingEntry

slbNewCfgDrecordVirtRealMappingEntry 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.6.1
A row in the Domain record and virtual/real server mapping table for Inbound Link Load balancing.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbNewCfgDrecordVirtRealMappingEntry  

slbNewCfgDomainRecordIndex 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.6.1.1
The number of the domain record.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

slbNewCfgEntryIndex 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.6.1.2
The number of the virtual real server mapping.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

slbNewCfgDrecordVirtServer 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.6.1.3
The virtual server number.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

slbNewCfgDrecordRealServer 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.6.1.4
The Real server number.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

slbNewCfgDrecordEntryState 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.6.1.5
Enable/disable a mapping in this table.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgDrecordEntryDelete 1.3.6.1.4.1.1872.2.5.4.1.1.16.5.6.1.6
By setting the value to delete(2), the entire row is deleted.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbCurSslCfgSSLAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.19.1
Status (enable/disable) of SSL policy.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurSslCfgSSLPolTable 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5
The table for configuring ssl policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurSslCfgSSLPolEntry

slbCurSslCfgSSLPolEntry 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1
A row in the ssl policy table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbCurSslCfgSSLPolEntry  

slbCurSslCfgSSLPolNameIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.1
The SSL policy name(key id) as an index.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

slbCurSslCfgSSLPolName 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.2
SSL policy name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

slbCurSslCfgSSLPolPassInfoCipherName 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.3
The SSL cipher-suite header name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

slbCurSslCfgSSLPolPassInfoCipherFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.4
SSL cipher-suite information to backend servers enabled.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurSslCfgSSLPolPassInfoVersionName 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.5
SSL version header name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

slbCurSslCfgSSLPolPassInfoVersionFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.6
SSL version information to backend servers enabled.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurSslCfgSSLPolPassInfoHeadBitsName 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.7
The passive cipher bits information to backend server.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

slbCurSslCfgSSLPolPassInfoHeadBitsFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.8
Cipher bits information to backend servers enabled.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurSslCfgSSLPolPassInfoFrontend 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.9
Enable/Disable add Front-End-Https: on header.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurSslCfgSSLPolCipherName 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.10
Cipher name for SSL.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurSslCfgSSLPolCipherUserdef 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.11
Cipher-suite allowed for SSL.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

slbCurSslCfgSSLPolIntermcaChainName 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.12
Intermediate CA certificate chain name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

slbCurSslCfgSSLPolIntermcaChainType 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.13
Intermediate CA certificate chain type certificate=cert,Group=group,None=.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

slbCurSslCfgSSLPolBecipher 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.14
Allowed cipher-suites in backend SSL [0-low, 1-midium, 2-high] .
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER low(0), medium(1), high(2)  

slbCurSslCfgSSLPolAuthpol 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.15
Client authentication policy.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

slbCurSslCfgSSLPolConvuri 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.16
Host regex for HTTP redirection conversion.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

slbCurSslCfgSSLPolBessl 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.17
Enable/Disable backend SSL encryption.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurSslCfgSSLPolConvert 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.18
Enable/Disable HTTP redirection conversion.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurSslCfgSSLPolAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.5.1.19
Enable or disable ssl policy.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewSslCfgSSLAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.19.2
Status (enable/disable) of SSL policy.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewSslCfgSSLPolTable 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7
The table for configuring ssl policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewSslCfgSSLPolEntry

slbNewSslCfgSSLPolEntry 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1
A row in the ssl policy table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbNewSslCfgSSLPolEntry  

slbNewSslCfgSSLPolNameIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.1
The SSL policy name(key id) as an index.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

slbNewSslCfgSSLPolName 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.2
SSL policy name,length of the string should be 32 charecters.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

slbNewSslCfgSSLPolPassInfoCipherName 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.3
The SSL cipher-suite header name.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

slbNewSslCfgSSLPolPassInfoCipherFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.4
Enable/Disable cipher-suite information to backend servers.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewSslCfgSSLPolPassInfoVersionName 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.5
SSL version header name.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

slbNewSslCfgSSLPolPassInfoVersionFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.6
Enable/Disable SSL version information to backend servers.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewSslCfgSSLPolPassInfoHeadBitsName 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.7
The passive cipher bits information to backend server.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

slbNewSslCfgSSLPolPassInfoHeadBitsFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.8
Enable/Disable Cipher bits information to backend servers.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewSslCfgSSLPolPassInfoFrontend 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.9
Enable/Disable add Front-End-Https: on header.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewSslCfgSSLPolCipherName 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.10
Cipher name for SSL.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

slbNewSslCfgSSLPolCipherUserdef 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.11
Cipher-suite allowed for SSL.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

slbNewSslCfgSSLPolIntermcaChainName 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.12
Intermediate CA certificate chain name.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

slbNewSslCfgSSLPolIntermcaChainType 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.13
Intermediate CA certificate chain type certificate=cert,Group=group,None=.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

slbNewSslCfgSSLPolBecipher 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.14
Allowed cipher-suites in backend SSL [0-low, 1-midium, 2-high].
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER low(0), medium(1), high(2)  

slbNewSslCfgSSLPolAuthpol 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.15
Client authentication policy.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

slbNewSslCfgSSLPolConvuri 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.16
Host regex for HTTP redirection conversion.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

slbNewSslCfgSSLPolBessl 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.17
Enable/Disable backend SSL encryption.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewSslCfgSSLPolConvert 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.18
Enable/Disable HTTP redirection conversion.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewSslCfgSSLPolAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.19
Enable or disable ssl policy.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewSslCfgSSLPolDel 1.3.6.1.4.1.1872.2.5.4.1.1.19.3.7.1.20
Delete SSL policy.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbCurSslCfgAuthPolTable 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1
The table for configuring Client Authentication policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurSslCfgAuthPolEntry

slbCurSslCfgAuthPolEntry 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1
A row in the Client Authentication policy table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbCurSslCfgAuthPolEntry  

slbCurSslCfgAuthPolNameIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.1
The Auth policy name(key id) as an index.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

slbCurSslCfgAuthPolName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.2
Auth policy name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

slbCurSslCfgAuthPolValidityMethod 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.3
Certificate validation check method.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurSslCfgAuthPolValidityStaturi 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.4
Static URI for OCSP validation requests.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

slbCurSslCfgAuthPolValidityUriprior 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.5
OCSP URI priority.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER clientcert(1), staticuri(2)  

slbCurSslCfgAuthPolValidityCachtime 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.6
OCSP response cache time.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurSslCfgAuthPolValidityTimedev 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.7
OCSP response time deviation.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurSslCfgAuthPolValidityAlgorthmName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.8
Allowed signing algorithm for the OCSP response[all, md5, sha1, sha256, sha384, sha512].
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

slbCurSslCfgAuthPolValidityVchain 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.9
Enable/Disable validating every CA certificate in the CA chain u.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurSslCfgAuthPolValiditySecure 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.10
Enable/Disable secure OCSP response by sending random nonce with.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurSslCfgAuthPolPassinfoVersionName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.11
Certificate version header.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

slbCurSslCfgAuthPolPassinfoVersionFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.12
Pass certificate version information to backend server?.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurSslCfgAuthPolPassinfoSerialName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.13
Certificate serial-number header .
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

slbCurSslCfgAuthPolPassinfoSerialFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.14
Pass certificate serial-number to backend server?.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurSslCfgAuthPolPassinfoAlgoName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.15
Certificate signature algorithm header name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

slbCurSslCfgAuthPolPassinfoAlgoFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.16
Pass certificate Signature Algorithm to backend server?
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurSslCfgAuthPolPassinfoIssuerName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.17
Certificate issuer header.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

slbCurSslCfgAuthPolPassinfoIssuerFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.18
Pass certificate issuer information to backend server?
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurSslCfgAuthPolPassinfoNbeforeName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.19
Certificate 'Not Before Validity Dates' header.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

slbCurSslCfgAuthPolPassinfoNbeforeFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.20
Pass certificate 'Not Before' Validity Date to backend serverr?
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurSslCfgAuthPolPassinfoNafterName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.21
Certificate 'Not After Validity Dates' header.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

slbCurSslCfgAuthPolPassinfoNafterFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.22
Pass certificate 'Not After' Validity Date to backend server?
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurSslCfgAuthPolPassinfoSubjectName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.23
Certificate subject header name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

slbCurSslCfgAuthPolPassinfoSubjectFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.24
Pass certificate subject to backend server?
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurSslCfgAuthPolPassinfoKeytypeName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.25
Certificate Public Key Type header.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

slbCurSslCfgAuthPolPassinfoKeytypeFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.26
Pass certificate Public Key Type information to backend servers?
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurSslCfgAuthPolPassinfoMd5Name 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.27
Certificate MD5 Hash header.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

slbCurSslCfgAuthPolPassinfoMd5Flag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.28
Pass certificate MD5 Hash information to backend servers?
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurSslCfgAuthPolPassinfoCertName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.29
Certificate header.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

slbCurSslCfgAuthPolPassinfoCertFormat 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.30
Certificate Header Lines Format.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurSslCfgAuthPolPassinfoCertFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.31
Pass certificate information to backend servers?
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurSslCfgAuthPolPassinfoCharset 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.32
Set the character set to be used for information.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurSslCfgAuthPolTrustcaChainName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.33
Trusted client's CA certificate.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

slbCurSslCfgAuthPolTrustcaChainType 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.34
Tusted client's CA certificate type certificate=cert,Group=group,None=.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

slbCurSslCfgAuthPolCadepth 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.35
Maximum depth to search the trusted CA in the CA certificate.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurSslCfgAuthPolCaverify 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.36
Certificate's CA verification level.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurSslCfgAuthPolFailurl 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.37
URL for redirection when client authentication fails
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

slbCurSslCfgAuthPolAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.38
Enable or disable Auth policy.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurSslCfgAuthPolPassinfoComp2424 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.1.1.39
Enable/Disable the 2424SSL Headers Compliance Mode.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewSslCfgAuthPolTable 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3
The table for configuring Client Authentication policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewSslCfgAuthPolEntry

slbNewSslCfgAuthPolEntry 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1
A row in the Client Authentication policy table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbNewSslCfgAuthPolEntry  

slbNewSslCfgAuthPolNameIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.1
The Auth policy name(key id) as an index.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

slbNewSslCfgAuthPolName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.2
Auth policy name.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

slbNewSslCfgAuthPolValidityMethod 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.3
Certificate validation check method.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

slbNewSslCfgAuthPolValidityStaturi 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.4
Static URI for OCSP validation requests.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

slbNewSslCfgAuthPolValidityUriprior 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.5
OCSP URI priority.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER clientcert(1), staticuri(2)  

slbNewSslCfgAuthPolValidityCachtime 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.6
OCSP response cache time.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

slbNewSslCfgAuthPolValidityTimedev 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.7
OCSP response time deviation.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

slbNewSslCfgAuthPolValidityAlgorthmName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.8
Allowed signing algorithm for the OCSP response [all, md5, sha1, sha256, sha384, sha512].
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

slbNewSslCfgAuthPolValidityVchain 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.9
Enable/Disable validating every CA certificate in the CA chain u.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewSslCfgAuthPolValiditySecure 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.10
Enable/Disable secure OCSP response by sending random nonce with.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewSslCfgAuthPolPassinfoVersionName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.11
Certificate version header.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

slbNewSslCfgAuthPolPassinfoVersionFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.12
Pass certificate version information to backend server?.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewSslCfgAuthPolPassinfoSerialName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.13
Certificate serial-number header.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

slbNewSslCfgAuthPolPassinfoSerialFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.14
Pass certificate serial-number to backend server?
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewSslCfgAuthPolPassinfoAlgoName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.15
Certificate signature algorithm header name.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

slbNewSslCfgAuthPolPassinfoAlgoFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.16
Pass certificate Signature Algorithm to backend server?
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewSslCfgAuthPolPassinfoIssuerName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.17
Certificate issuer header.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

slbNewSslCfgAuthPolPassinfoIssuerFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.18
Pass certificate issuer information to backend server?
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewSslCfgAuthPolPassinfoNbeforeName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.19
Certificate 'Not Before Validity Dates' header.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

slbNewSslCfgAuthPolPassinfoNbeforeFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.20
Pass certificate 'Not Before' Validity Date to backend serverr?
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewSslCfgAuthPolPassinfoNafterName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.21
Certificate 'Not After Validity Dates' header.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

slbNewSslCfgAuthPolPassinfoNafterFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.22
Pass certificate 'Not After' Validity Date to backend server?
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewSslCfgAuthPolPassinfoSubjectName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.23
Certificate subject header name.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

slbNewSslCfgAuthPolPassinfoSubjectFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.24
Pass certificate subject to backend server?
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewSslCfgAuthPolPassinfoKeytypeName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.25
Certificate Public Key Type header.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

slbNewSslCfgAuthPolPassinfoKeytypeFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.26
Pass certificate Public Key Type information to backend servers?
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewSslCfgAuthPolPassinfoMd5Name 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.27
Certificate MD5 Hash header.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

slbNewSslCfgAuthPolPassinfoMd5Flag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.28
Pass certificate MD5 Hash information to backend servers?
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewSslCfgAuthPolPassinfoCertName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.29
Certificate header.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

slbNewSslCfgAuthPolPassinfoCertFormat 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.30
Certificate Header Lines Format.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

slbNewSslCfgAuthPolPassinfoCertFlag 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.31
Pass certificate information to backend servers?
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewSslCfgAuthPolPassinfoCharset 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.32
Set the character set to be used for information.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

slbNewSslCfgAuthPolTrustcaChainName 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.33
Trusted client's CA certificate name.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

slbNewSslCfgAuthPolTrustcaChainType 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.34
Trusted client's CA certificate type certificate=cert,Group=group,None=.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

slbNewSslCfgAuthPolCadepth 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.35
Maximum depth to search the trusted CA in the CA certificate.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

slbNewSslCfgAuthPolCaverify 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.36
Certificate's CA verification level.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

slbNewSslCfgAuthPolFailurl 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.37
URL for redirection when client authentication fails
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

slbNewSslCfgAuthPolAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.38
Enable or disable Auth policy.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewSslCfgAuthPolDelete 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.39
Delete Client Authentication Policy.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbNewSslCfgAuthPolPassinfoComp2424 1.3.6.1.4.1.1872.2.5.4.1.1.19.4.3.1.40
Enable/Disable the 2424SSL Headers Compliance Mode.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurSslCfgCertsTable 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurSslCfgCertsEntry

slbCurSslCfgCertsEntry 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbCurSslCfgCertsEntry  

slbCurSslCfgCertsID 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.1
.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbCurSslCfgCertsType 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.2
.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER key(1), certificateRequest(2), serverCertificate(3), trustedCertificate(4), intermediateCertificate(5)  

slbCurSslCfgCertsName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.3
.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbCurSslCfgCertsKeySize 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.4
.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ks512(1), ks1024(2), ks2048(3), ks4096(4), unknown(6)  

slbCurSslCfgCertsExpirty 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.5
.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

slbCurSslCfgCertsCommonName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.6
.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..85)  

slbCurSslCfgCertsHashAlgo 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.7
.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER md5(1), sha1(2), sha256(3), sha384(4), sha512(5), unknown(6)  

slbCurSslCfgCertsCountryName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.8
.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..85)  

slbCurSslCfgCertsPrpvinceName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.9
.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..149)  

slbCurSslCfgCertsLocalityName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.10
.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..149)  

slbCurSslCfgCertsOrganizationName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.11
.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..85)  

slbCurSslCfgCertsOrganizationUnitName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.12
.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..85)  

slbCurSslCfgCertsEMail 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.13
.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..149)  

slbCurSslCfgCertsValidityPeriod 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.14
.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..3650  

slbCurSslCfgCertsStatus 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.1.1.15
Shows if the current certificate is generated.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER generated(1), notGenerated(2)  

slbNewSslCfgCertsTable 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewSslCfgCertsEntry

slbNewSslCfgCertsEntry 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbNewSslCfgCertsEntry  

slbNewSslCfgCertsID 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.1
.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbNewSslCfgCertsType 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.2
.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER key(1), certificateRequest(2), serverCertificate(3), trustedCertificate(4), intermediateCertificate(5)  

slbNewSslCfgCertsName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.3
.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbNewSslCfgCertsKeySize 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.4
.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ks512(1), ks1024(2), ks2048(3), ks4096(4), unknown(6)  

slbNewSslCfgCertsExpirty 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.5
.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

slbNewSslCfgCertsCommonName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.6
.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..85)  

slbNewSslCfgCertsHashAlgo 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.7
.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER md5(1), sha1(2), sha256(3), sha384(4), sha512(5), unknown(6)  

slbNewSslCfgCertsCountryName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.8
.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..85)  

slbNewSslCfgCertsPrpvinceName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.9
.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..149)  

slbNewSslCfgCertsLocalityName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.10
.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..149)  

slbNewSslCfgCertsOrganizationName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.11
.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..85)  

slbNewSslCfgCertsOrganizationUnitName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.12
.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..85)  

slbNewSslCfgCertsEMail 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.13
.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..149)  

slbNewSslCfgCertsValidityPeriod 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.14
.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..3650  

slbNewSslCfgCertsDelete 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.15
Delete certificate.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbNewSslCfgCertsGenerate 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.16
By setting the value to generate(2), the Certicicate will be generated.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), generate(2)  

slbNewSslCfgCertsStatus 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.2.1.17
Shows if the current certificate is generated.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER generated(1), notGenerated(2), inProgress(3)  

slbSslCfgCertsDefaults 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3
OBJECT IDENTIFIER    

slbCurSslCfgCertsDefaultsCountryName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.1
SSL certificate Country Name in 2 letter code.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(2)  

slbNewSslCfgCertsDefaultsCountryName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.2
SSL certificate Country Name in 2 letter code.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(2)  

slbCurSslCfgCertsDefaultsProvinceName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.3
SSL Certificate State or Province Name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..149)  

slbNewSslCfgCertsDefaultsProvinceName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.4
SSL Certificate State or Province Name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..149)  

slbCurSslCfgCertsDefaultsLocallyName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.5
SSL certificate locality name (e.g. city).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..149)  

slbNewSslCfgCertsDefaultsLocallyName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.6
SSL certificate locality name (e.g. city).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..149)  

slbCurSslCfgCertsDefaultsOrganizationName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.7
SSL certificate Organization Name (e.g. company).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..85)  

slbNewSslCfgCertsDefaultsOrganizationName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.8
SSL certificate Organization Name (e.g. company).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..85)  

slbCurSslCfgCertsDefaultsOrganizationUnitName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.9
SSL certificate Organizational Unit Name (e.g. accounting).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..85)  

slbNewSslCfgCertsDefaultsOrganizationUnitName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.10
SSL certificate Organizational Unit Name (e.g. accounting).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..85)  

slbCurSslCfgCertsDefaultsEMail 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.11
SSL certificate Email (e.g. admin@company.com).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..149)  

slbNewSslCfgCertsDefaultsEMail 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.3.12
SSL certificate Email (e.g. admin@company.com).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..149)  

slbCurSslCfgGroupsTable 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.4
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurSslCfgGroupsEntry

slbCurSslCfgGroupsEntry 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.4.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbCurSslCfgGroupsEntry  

slbCurSslCfgGroupsID 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.4.1.1
.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbCurSslCfgGroupsName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.4.1.2
.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbCurSslCfgGroupsType 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.4.1.3
.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER serverCertificate(3), trustedCertificate(4), intermediateCertificate(5)  

slbCurSslCfgGroupsDefaultCert 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.4.1.4
.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbCurSslCfgGroupsCertBmap 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.4.1.5
List of Certificates the group holds - Selected certificates are presented in a bitmap format. Receiving order is as: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Cert 9 || || || ||___ Cert 4 || |____ Cert 3 || . . . ||_________ Cert 2 |__________ Cert 1 where x : 1 - The represented certficate is selected 0 - The represented certificate is not selected.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slbNewSslCfgGroupsTable 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.5
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewSslCfgGroupsEntry

slbNewSslCfgGroupsEntry 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.5.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbNewSslCfgGroupsEntry  

slbNewSslCfgGroupsID 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.5.1.1
.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbNewSslCfgGroupsName 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.5.1.2
.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbNewSslCfgGroupsType 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.5.1.3
.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER serverCertificate(3), trustedCertificate(4), intermediateCertificate(5)  

slbNewSslCfgGroupsDelete 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.5.1.4
Delete certificate group.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbNewSslCfgGroupsDefaultCert 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.5.1.5
.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbNewSslCfgGroupsAddCert 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.5.1.6
Add cerificate to the group
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbNewSslCfgGroupsRemCert 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.5.1.7
Remove cerificate from the group
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbNewSslCfgGroupsCertBmap 1.3.6.1.4.1.1872.2.5.4.1.1.19.5.5.1.8
List of Certificates the group holds - Selected certificates are presented in a bitmap format. Receiving order is as: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Cert 9 || || || ||___ Cert 4 || |____ Cert 3 || . . . ||_________ Cert 2 |__________ Cert 1 where x : 1 - The represented certficate is selected 0 - The represented certificate is not selected.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

slbSmtportTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.17.1
The maximum number of entries in service mapping real port table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgSmtportTable 1.3.6.1.4.1.1872.2.5.4.1.1.17.2
The service mapping real port table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurCfgSmtportEntry

slbCurCfgSmtportEntry 1.3.6.1.4.1.1872.2.5.4.1.1.17.2.1
A row in the service mapping real port table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbCurCfgSmtportEntry  

slbCurCfgSmtportIndex 1.3.6.1.4.1.1872.2.5.4.1.1.17.2.1.1
The service mapping real port index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgSmtportNum 1.3.6.1.4.1.1872.2.5.4.1.1.17.2.1.2
The service mapping real port number.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 2..65534  

slbNewCfgSmtportTable 1.3.6.1.4.1.1872.2.5.4.1.1.17.3
The table of real server service ports.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewCfgSmtportEntry

slbNewCfgSmtportEntry 1.3.6.1.4.1.1872.2.5.4.1.1.17.3.1
A row in the service mapping real port table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbNewCfgSmtportEntry  

slbNewCfgSmtportIndex 1.3.6.1.4.1.1872.2.5.4.1.1.17.3.1.1
The service mapping real port index
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbNewCfgSmtportNum 1.3.6.1.4.1.1872.2.5.4.1.1.17.3.1.2
The service mapping real port number.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 2..65534  

slbNewCfgSmtportDelete 1.3.6.1.4.1.1872.2.5.4.1.1.17.3.1.3
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbSmtportTableAvaibleIndex 1.3.6.1.4.1.1872.2.5.4.1.1.17.4
The first free real port index of the Service Mapping Table. Value 0 will be returned when all 16 real ports are configured.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbWlmTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.6.1
The maximum number of entries in Workload Manager table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgWlmTable 1.3.6.1.4.1.1872.2.5.4.1.6.2
The table of Workload Managers configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurCfgWlmEntry

slbCurCfgWlmEntry 1.3.6.1.4.1.1872.2.5.4.1.6.2.1
Information about a particular Workload Manager configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbCurCfgWlmEntry  

slbCurCfgWlmIndex 1.3.6.1.4.1.1872.2.5.4.1.6.2.1.1
The Workload Manager number
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgWlmIpAddr 1.3.6.1.4.1.1872.2.5.4.1.6.2.1.2
IP address of the Workload Manager.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slbCurCfgWlmPort 1.3.6.1.4.1.1872.2.5.4.1.6.2.1.3
The port number for the Workload Manager.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65534  

slbCurCfgWlmGroups 1.3.6.1.4.1.1872.2.5.4.1.6.2.1.4
The group number for the Workload Manager.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

slbCurCfgWlmState 1.3.6.1.4.1.1872.2.5.4.1.6.2.1.5
Connection state of the Workload Manager.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgWlmTable 1.3.6.1.4.1.1872.2.5.4.1.6.3
The table of Workload Managers configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewCfgWlmEntry

slbNewCfgWlmEntry 1.3.6.1.4.1.1872.2.5.4.1.6.3.1
Information about a particular Workload Manager configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbNewCfgWlmEntry  

slbNewCfgWlmIndex 1.3.6.1.4.1.1872.2.5.4.1.6.3.1.1
The Workload Manager number
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbNewCfgWlmIpAddr 1.3.6.1.4.1.1872.2.5.4.1.6.3.1.2
IP address of the Workload Manager.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

slbNewCfgWlmPort 1.3.6.1.4.1.1872.2.5.4.1.6.3.1.3
The port number for the Workload Manager.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65534  

slbNewCfgWlmDelete 1.3.6.1.4.1.1872.2.5.4.1.6.3.1.4
By setting the value to delete(2), the entire row is deleted.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbNewCfgWlmGroups 1.3.6.1.4.1.1872.2.5.4.1.6.3.1.5
The group number for the Workload Manager.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

slbNewCfgWlmState 1.3.6.1.4.1.1872.2.5.4.1.6.3.1.6
Connection state of the Workload Manager.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurAcclCfgCachememcache 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.1
Maximum percentage of Alteon RAM to be allocate for caching.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..50  

slbNewAcclCfgCachememcache 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.2
Defines the maximum percentage of Alteon RAM to be allocate for caching.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..50  

slbCurAcclCfgCacheOnOff 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.3
Globally ON or OFF of caching.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

slbNewAcclCfgCacheOnOff 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.4
Globally ON or OFF of caching.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

slbCurAcclCfgCachePolTable 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5
The table for configuring caching policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurAcclCfgCachePolEntry

slbCurAcclCfgCachePolEntry 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1
A row in the caching policy table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbCurAcclCfgCachePolEntry  

slbCurAcclCfgCachePolNameIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1.1
The caching policy ID(key id) as an index.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbCurAcclCfgCachePolName 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1.2
Cache policy name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbCurAcclCfgCachePolExpireTime 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1.3
Maximum expiration time in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurAcclCfgCachePolMinSize 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1.4
Minimum Object size to be stored in bytes.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurAcclCfgCachePolMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1.5
Maximum Object size to be stored in bytes.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurAcclCfgCachePolURLList 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1.6
URL list which is associated with this policy.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbCurAcclCfgCachePolStore 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1.7
Caching behavior for storing new objects in cache.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER srvrhdr(1), cacheall(2)  

slbCurAcclCfgCachePolServe 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1.8
Cache behavior when serving clients with objects.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER clnthdr(1), refresh(2), cache(3)  

slbCurAcclCfgCachePolQuery 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1.9
Specifies whether query parameters added to object URL should be considered when storing/serving object from cache.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER consider(1), ignore(2)  

slbCurAcclCfgCachePolBrowser 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1.10
Optimize browser cache.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurAcclCfgCachePolAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.5.1.11
Status (enable/disable) of caching policy.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewAcclCfgCachePolTable 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6
The table for configuring caching policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewAcclCfgCachePolEntry

slbNewAcclCfgCachePolEntry 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1
A row in the caching policy table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbNewAcclCfgCachePolEntry  

slbNewAcclCfgCachePolNameIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.1
The caching policy ID(key id) as an index, length of the string should be 32 charecters.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbNewAcclCfgCachePolName 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.2
Cache policy name, length of the string should be 32 charecters.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbNewAcclCfgCachePolExpireTime 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.3
Set maximum expiration time, Range is 60- 43,200,000 seconds (~500 days).
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

slbNewAcclCfgCachePolMinSize 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.4
Minimum Object size to be stored [Bytes], Values: 1-65536.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

slbNewAcclCfgCachePolMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.5
Maximum Object size to be stored [Bytes], Values: 1-512000000.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

slbNewAcclCfgCachePolURLList 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.6
URL list to be associated with this policy, Values: 1-32 character string.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbNewAcclCfgCachePolStore 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.7
Define caching behavior for storing New objects in cache.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER srvrhdr(1), cacheall(2)  

slbNewAcclCfgCachePolServe 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.8
Define cache behavior when serving clients with objects.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER clnthdr(1), refresh(2), cache(3)  

slbNewAcclCfgCachePolQuery 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.9
Specifies whether query parameters added to object URL should be considered when storing/serving object from cache.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER consider(1), ignore(2)  

slbNewAcclCfgCachePolBrowser 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.10
Optimize browser cache.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewAcclCfgCachePolAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.11
Enable or disable caching policy.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewAcclCfgCachePolDelete 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.6.1.12
Delete Caching policy.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbCurAcclCfgCacheUrlListTable 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.7
The table for configuring caching URL LIST.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurAcclCfgCacheUrlListEntry

slbCurAcclCfgCacheUrlListEntry 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.7.1
A row in the caching URL LIST table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbCurAcclCfgCacheUrlListEntry  

slbCurAcclCfgCacheUrlListIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.7.1.1
The caching policy URL LIST (key id) as an index.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbCurAcclCfgCacheUrlListName 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.7.1.2
Cache URL LIST name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbCurAcclCfgCacheUrlListAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.7.1.3
Status (enable/disable) of caching URL LIST.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewAcclCfgCacheUrlListTable 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.8
The table for configuring caching URL LIST.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewAcclCfgCacheUrlListEntry

slbNewAcclCfgCacheUrlListEntry 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.8.1
A row in the caching URL LIST table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbNewAcclCfgCacheUrlListEntry  

slbNewAcclCfgCacheUrlListIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.8.1.1
The caching policy URL LIST (key id) as an index.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbNewAcclCfgCacheUrlListName 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.8.1.2
Cache URL LIST name.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbNewAcclCfgCacheUrlListAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.8.1.3
Status (enable/disable) of caching URL LIST.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewAcclCfgCacheUrlListDel 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.8.1.5
Delete Caching URL list.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbNewAcclCfgCacheUrlListCopy 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.8.1.6
Duplicating an entire Rule-List by defining the destination Rule-list id.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

slbCurAcclCfgCacheUrlRuleTable 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9
The table for configuring caching URL Rules.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurAcclCfgCacheUrlRuleEntry

slbCurAcclCfgCacheUrlRuleEntry 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9.1
A row in the caching URL Rule table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbCurAcclCfgCacheUrlRuleEntry  

slbCurAcclCfgCacheUrlRuleListIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9.1.1
The caching policy URL LIST (key id) as an index.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbCurAcclCfgCacheUrlRuleIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9.1.2
The caching URL Rule number as an index.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurAcclCfgCacheUrlRuleName 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9.1.3
The caching URL Rule name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbCurAcclCfgCacheUrlRuleDomainM 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9.1.4
Defines whether Domain matching should be evaluated as String, Regex or match, any (default any).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER any(1), text(2), regex(3)  

slbCurAcclCfgCacheUrlRuleDomain 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9.1.5
Defines the Virtual Host for which this rule applies.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

slbCurAcclCfgCacheUrlRuleURLm 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9.1.6
Defines whether URL matching should be evaluated as String, Regex or match, any (default any).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER any(1), text(2), regex(3)  

slbCurAcclCfgCacheUrlRuleURL 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9.1.7
Defines URL of specific object (file/folder) to be matched by this rule.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

slbCurAcclCfgCacheUrlRuleExpire 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9.1.8
The Maximum time for the cache object to served from cache (in seconds).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurAcclCfgCacheUrlRuleCache 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9.1.9
Defines if the matched response should be cached or not.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurAcclCfgCacheUrlRuleAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.9.1.10
Status (enable/disable) of caching URL Rule.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewAcclCfgCacheUrlRuleTable 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10
The table for configuring caching URL Rules.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewAcclCfgCacheUrlRuleEntry

slbNewAcclCfgCacheUrlRuleEntry 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1
A row in the caching URL Rule table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbNewAcclCfgCacheUrlRuleEntry  

slbNewAcclCfgCacheUrlRuleListIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.1
The caching policy URL LIST (key id) as an index.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbNewAcclCfgCacheUrlRuleIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.2
The caching URL Rule number as an index.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbNewAcclCfgCacheUrlRuleName 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.3
The caching URL Rule name.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbNewAcclCfgCacheUrlRuleDomainM 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.4
Defines whether Domain matching should be evaluated as String, Regex or match, any (default any).
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER any(1), text(2), regex(3)  

slbNewAcclCfgCacheUrlRuleDomain 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.5
Defines the Virtual Host for which this rule applies.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..255)  

slbNewAcclCfgCacheUrlRuleURLm 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.6
Defines whether URL matching should be evaluated as String, Regex or match, any (default any).
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER any(1), text(2), regex(3)  

slbNewAcclCfgCacheUrlRuleURL 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.7
Defines URL of specific object (file/folder) to be matched by this rule.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

slbNewAcclCfgCacheUrlRuleExpire 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.8
The Maximum time for the cache object to served from cache (in seconds).
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

slbNewAcclCfgCacheUrlRuleCache 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.9
Defines if the matched response should be cached or not.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewAcclCfgCacheUrlRuleAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.10
Status (enable/disable) of caching URL Rule.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewAcclCfgCacheUrlRuleDelete 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.11
By setting the value to delete(2), the entire row is deleted.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbNewAcclCfgCacheUrlRuleCopy 1.3.6.1.4.1.1872.2.5.4.1.1.18.1.10.1.12
Copy rule to another index in the same rule-list. When read, zero is returned.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

slbCurAcclCfgCompOnOff 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.1
Globally ON or OFF of compression.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

slbNewAcclCfgCompOnOff 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.2
Globally ON or OFF of compression.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

slbCurAcclCfgCompPolTable 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3
The table for configuring compression policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurAcclCfgCompPolEntry

slbCurAcclCfgCompPolEntry 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1
A row in the compression policy table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbCurAcclCfgCompPolEntry  

slbCurAcclCfgCompPolNameIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1.1
The compression policy ID(key id) as an index.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbCurAcclCfgCompPolName 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1.2
Compression policy name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbCurAcclCfgCompPolAlgrthm 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1.3
Preferred compression algorithm.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER gzip(1), deflate(2)  

slbCurAcclCfgCompPolComplv1 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1.4
Compression level.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..9  

slbCurAcclCfgCompPolMinSize 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1.5
Minimum file size to be compressed [Byte].
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

slbCurAcclCfgCompPolMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1.6
Maximum file size to be compressed [Byte].
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurAcclCfgCompPolURLList 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1.7
URL list which is associated with this policy.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbCurAcclCfgCompPolBrwsList 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1.8
Browser list which is associated with this policy.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbCurAcclCfgCompPolPreDefBrwsRuleList 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1.9
Enable/Disable predefined browser exceptions rule-list.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurAcclCfgCompPolCompsrv 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1.10
Enable/Disable compression by real server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurAcclCfgCompPolAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.3.1.11
Status (enable/disable) of compression policy.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewAcclCfgCompPolTable 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4
The table for configuring compression policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewAcclCfgCompPolEntry

slbNewAcclCfgCompPolEntry 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1
A row in the compression policy table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbNewAcclCfgCompPolEntry  

slbNewAcclCfgCompPolNameIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.1
The compression policy ID(key id) as an index.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbNewAcclCfgCompPolName 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.2
Compression policy name.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbNewAcclCfgCompPolAlgrthm 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.3
Preferred compression algorithm.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER gzip(1), deflate(2)  

slbNewAcclCfgCompPolComplv1 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.4
Compression level.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..9  

slbNewAcclCfgCompPolMinSize 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.5
Minimum file size to be compressed [Byte].
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..65535  

slbNewAcclCfgCompPolMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.6
Maximum file size to be compressed [Byte], Values: 1-2000000000, 0-Unlimited
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

slbNewAcclCfgCompPolURLList 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.7
URL list which is associated with this policy.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbNewAcclCfgCompPolBrwsList 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.8
Browser list which is associated with this policy.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbNewAcclCfgCompPolPreDefBrwsRuleList 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.9
Enable/Disable predefined browser exceptions rule-list.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewAcclCfgCompPolCompsrv 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.10
Enable/Disable compression by real server.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewAcclCfgCompPolAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.11
Status (enable/disable) of compression policy.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewAcclCfgCompPolDelete 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.4.1.12
Delete compression policy.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbCurAcclCfgCompUrlListTable 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.5
The table for configuring compression URL LIST.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurAcclCfgCompUrlListEntry

slbCurAcclCfgCompUrlListEntry 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.5.1
A row in the compression URL LIST table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbCurAcclCfgCompUrlListEntry  

slbCurAcclCfgCompUrlListIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.5.1.1
The compression policy URL LIST (key id) as an index.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbCurAcclCfgCompUrlListName 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.5.1.2
Compression URL LIST name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbCurAcclCfgCompUrlListAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.5.1.3
Status (enable/disable) of compression URL LIST.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewAcclCfgCompUrlListTable 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.6
The table for configuring compression URL LIST.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewAcclCfgCompUrlListEntry

slbNewAcclCfgCompUrlListEntry 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.6.1
A row in the compression URL LIST table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbNewAcclCfgCompUrlListEntry  

slbNewAcclCfgCompUrlListIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.6.1.1
The compression policy URL LIST (key id) as an index.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbNewAcclCfgCompUrlListName 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.6.1.2
Compression URL LIST name.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbNewAcclCfgCompUrlListAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.6.1.3
Status (enable/disable) of compression URL LIST.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewAcclCfgCompUrlListDel 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.6.1.4
Delete Compression URL list.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbNewAcclCfgCompUrlListCopy 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.6.1.5
Duplicating an entire Rule-List by defining the destination Rule-list id.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

slbCurAcclCfgCompUrlRuleTable 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.7
The table for configuring compression URL Rules.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurAcclCfgCompUrlRuleEntry

slbCurAcclCfgCompUrlRuleEntry 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.7.1
A row in the compression URL Rule table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbCurAcclCfgCompUrlRuleEntry  

slbCurAcclCfgCompUrlRuleListIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.7.1.1
The compression URL LIST (key id) as an index.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbCurAcclCfgCompUrlRuleIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.7.1.2
The compression URL Rule number as an index.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurAcclCfgCompUrlRuleName 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.7.1.3
The compression URL Rule name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbCurAcclCfgCompUrlRuleDomainM 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.7.1.4
Defines whether Domain matching should be evaluated as String, Regex or match, any (default any).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER any(1), text(2), regex(3)  

slbCurAcclCfgCompUrlRuleDomain 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.7.1.5
Defines the Virtual Host for which this rule applies.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

slbCurAcclCfgCompUrlRuleURLm 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.7.1.6
Defines whether URL matching should be evaluated as String, Regex or match, any (default any).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER any(1), text(2), regex(3)  

slbCurAcclCfgCompUrlRuleURL 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.7.1.7
Defines URL of specific object (file/folder) to be matched by this rule.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

slbCurAcclCfgCompUrlRuleCompress 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.7.1.8
Enable/Disable the compression.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurAcclCfgCompUrlRuleAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.7.1.9
Status (enable/disable) of compression URL Rule.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewAcclCfgCompUrlRuleTable 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8
The table for configuring compression URL Rules.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewAcclCfgCompUrlRuleEntry

slbNewAcclCfgCompUrlRuleEntry 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1
A row in the compression URL Rule table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbNewAcclCfgCompUrlRuleEntry  

slbNewAcclCfgCompUrlRuleListIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1.1
The compression URL LIST (key id) as an index.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbNewAcclCfgCompUrlRuleIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1.2
The compression URL Rule number as an index.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbNewAcclCfgCompUrlRuleName 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1.3
The compression URL Rule name.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbNewAcclCfgCompUrlRuleDomainM 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1.4
Defines whether Domain matching should be evaluated as String, Regex or match, any (default any).
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER any(1), text(2), regex(3)  

slbNewAcclCfgCompUrlRuleDomain 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1.5
Defines the Virtual Host for which this rule applies.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..255)  

slbNewAcclCfgCompUrlRuleURLm 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1.6
Defines whether URL matching should be evaluated as String, Regex or match, any (default any).
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER any(1), text(2), regex(3)  

slbNewAcclCfgCompUrlRuleURL 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1.7
Defines URL of specific object (file/folder) to be matched by this rule.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

slbNewAcclCfgCompUrlRuleCompress 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1.8
Enable/Disable the compression.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewAcclCfgCompUrlRuleAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1.9
Status (enable/disable) of compression URL Rule.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewAcclCfgCompUrlRuleDelete 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1.10
By setting the value to delete(2), the entire row is deleted.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbNewAcclCfgCompUrlRuleCopy 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.8.1.11
Copy rule to another index in the same rule-list.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

slbCurAcclCfgCompBrwsListTable 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.9
The table for configuring compression browser LIST.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurAcclCfgCompBrwsListEntry

slbCurAcclCfgCompBrwsListEntry 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.9.1
A row in the compression browser LIST table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbCurAcclCfgCompBrwsListEntry  

slbCurAcclCfgCompBrwsListIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.9.1.1
The compression policy browser LIST (key id) as an index.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbCurAcclCfgCompBrwsListName 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.9.1.2
Compression browser list name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbCurAcclCfgCompBrwsListAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.9.1.3
Status (enable/disable) of compression browser list.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewAcclCfgCompBrwsListTable 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.10
The table for configuring compression browser list.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewAcclCfgCompBrwsListEntry

slbNewAcclCfgCompBrwsListEntry 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.10.1
A row in the compression browser list table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbNewAcclCfgCompBrwsListEntry  

slbNewAcclCfgCompBrwsListIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.10.1.1
The compression policy browser list (key id) as an index.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbNewAcclCfgCompBrwsListName 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.10.1.2
Compression browser list name.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbNewAcclCfgCompBrwsListAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.10.1.3
Status (enable/disable) of compression browser list.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewAcclCfgCompBrwsListDel 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.10.1.4
Delete Compression Browser list.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbNewAcclCfgCompBrwsListCopy 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.10.1.5
Duplicating an entire browser list by defining the destination browser list id.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

slbCurAcclCfgCompBrwsRuleTable 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.11
The table for configuring compression browser Rules.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurAcclCfgCompBrwsRuleEntry

slbCurAcclCfgCompBrwsRuleEntry 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.11.1
A row in the compression browser Rule table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbCurAcclCfgCompBrwsRuleEntry  

slbCurAcclCfgCompBrwsRuleListIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.11.1.1
The compression browser list (key id) as an index.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbCurAcclCfgCompBrwsRuleIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.11.1.2
The compression browser Rule number as an index.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurAcclCfgCompBrwsRuleName 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.11.1.3
The compression browser Rule name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbCurAcclCfgCompBrwsRuleAgentM 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.11.1.4
Defines whether user agent field should be evaluated as String, Regex or match, any (default any).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER any(1), text(2), regex(3)  

slbCurAcclCfgCompBrwsRuleAgent 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.11.1.5
Defines the User-Agent string for which this rule applies.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

slbCurAcclCfgCompBrwsRuleContentM 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.11.1.6
Defines whether content type should be evaluated as String, Regex or match, any (default any).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER any(1), text(2), regex(3)  

slbCurAcclCfgCompBrwsRuleContent 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.11.1.7
Defines the Content-type string for which this rule applies.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

slbCurAcclCfgCompBrwsRuleCompress 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.11.1.8
Enable/Disable the compression. Defines if the matched response should be compressed or not
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurAcclCfgCompBrwsRuleAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.11.1.9
Status (enable/disable) of compression browser Rule.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewAcclCfgCompBrwsRuleTable 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12
The table for configuring compression browser Rules.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewAcclCfgCompBrwsRuleEntry

slbNewAcclCfgCompBrwsRuleEntry 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1
A row in the compression browser Rule table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbNewAcclCfgCompBrwsRuleEntry  

slbNewAcclCfgCompBrwsRuleListIdIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1.1
The compression browser list (key id) as an index.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbNewAcclCfgCompBrwsRuleIndex 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1.2
The compression browser Rule number as an index.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbNewAcclCfgCompBrwsRuleName 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1.3
The compression browser Rule name.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbNewAcclCfgCompBrwsRuleAgentM 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1.4
Defines whether user agent field should be evaluated as String, Regex or match, any (default any).
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER any(1), text(2), regex(3)  

slbNewAcclCfgCompBrwsRuleAgent 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1.5
Defines the User-Agent string for which this rule applies.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..255)  

slbNewAcclCfgCompBrwsRuleContentM 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1.6
Defines whether content type should be evaluated as String, Regex or match, any (default any).
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER any(1), text(2), regex(3)  

slbNewAcclCfgCompBrwsRuleContent 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1.7
Defines the Content-type string for which this rule applies.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

slbNewAcclCfgCompBrwsRuleCompress 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1.8
Enable/Disable the compression. Defines if the matched response should be compressed or not
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewAcclCfgCompBrwsRuleAdminStatus 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1.9
Status (enable/disable) of compression browser Rule.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewAcclCfgCompBrwsRuleDelete 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1.10
By setting the value to delete(2), the entire row is deleted.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbNewAcclCfgCompBrwsRuleCopy 1.3.6.1.4.1.1872.2.5.4.1.1.18.2.12.1.11
Copy rule to another index in the same rule-list.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

slbCurNwclssCfgNetworkClassesTable 1.3.6.1.4.1.1872.2.5.4.1.1.22.1
Current network classes table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurNwclssCfgNetworkClassesEntry

slbCurNwclssCfgNetworkClassesEntry 1.3.6.1.4.1.1872.2.5.4.1.1.22.1.1
A row in the network classes table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbCurNwclssCfgNetworkClassesEntry  

slbCurNwclssCfgNetworkClassesId 1.3.6.1.4.1.1872.2.5.4.1.1.22.1.1.1
Network class id.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbCurNwclssCfgNetworkClassesName 1.3.6.1.4.1.1872.2.5.4.1.1.22.1.1.2
Network class name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbCurNwclssCfgNetworkClassesIpVer 1.3.6.1.4.1.1872.2.5.4.1.1.22.1.1.3
The type of IP address.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2)  

slbNewNwclssCfgNetworkClassesTable 1.3.6.1.4.1.1872.2.5.4.1.1.22.2
New network classes table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewNwclssCfgNetworkClassesEntry

slbNewNwclssCfgNetworkClassesEntry 1.3.6.1.4.1.1872.2.5.4.1.1.22.2.1
A row in the new network classes table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbNewNwclssCfgNetworkClassesEntry  

slbNewNwclssCfgNetworkClassesId 1.3.6.1.4.1.1872.2.5.4.1.1.22.2.1.1
Network class id.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbNewNwclssCfgNetworkClassesName 1.3.6.1.4.1.1872.2.5.4.1.1.22.2.1.2
Network class name.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbNewNwclssCfgNetworkClassesIpVer 1.3.6.1.4.1.1872.2.5.4.1.1.22.2.1.3
The type of IP address.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2)  

slbNewNwclssCfgNetworkClassesDel 1.3.6.1.4.1.1872.2.5.4.1.1.22.2.1.4
By setting the value to delete(2), the entire row is deleted.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbNewNwclssCfgNetworkClassesCopy 1.3.6.1.4.1.1872.2.5.4.1.1.22.2.1.5
Duplicating an entire Network class by defining the destination Network class id.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbCurNwclssCfgNetworkElementsTable 1.3.6.1.4.1.1872.2.5.4.1.1.22.3
Current network elements table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurNwclssCfgNetworkElementsEntry

slbCurNwclssCfgNetworkElementsEntry 1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1
A row in the network elements table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbCurNwclssCfgNetworkElementsEntry  

slbCurNwclssCfgNetworkElementsNcId 1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.1
Id of network class which owns network element.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbCurNwclssCfgNetworkElementsId 1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.2
Network element id.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbCurNwclssCfgNetworkElementsNetType 1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.3
The type of network.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER subnet(1), range(2)  

slbCurNwclssCfgNetworkElementsIp 1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.4
IPv4 address of network element.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slbCurNwclssCfgNetworkElementsMask 1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.5
Subnet mask of network element.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slbCurNwclssCfgNetworkElementsFromIp 1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.6
From IP address of network element.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slbCurNwclssCfgNetworkElementsToIp 1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.7
To IP address of network element.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slbCurNwclssCfgNetworkElementsIpv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.8
The IPv6 address of network element. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

slbCurNwclssCfgNetworkElementsPrefixLen 1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.9
The prefix length associated with the network IP address .
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..128  

slbCurNwclssCfgNetworkElementsFromIpv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.10
The from IPv6 address of network element. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

slbCurNwclssCfgNetworkElementsToIpv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.11
The to IPv6 address of network element. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

slbCurNwclssCfgNetworkElementsMatchType 1.3.6.1.4.1.1872.2.5.4.1.1.22.3.1.12
The match type of network element.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER include(1), exclude(2)  

slbNewNwclssCfgNetworkElementsTable 1.3.6.1.4.1.1872.2.5.4.1.1.22.4
New network elements table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewNwclssCfgNetworkElementsEntry

slbNewNwclssCfgNetworkElementsEntry 1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1
A row in the new network elements table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbNewNwclssCfgNetworkElementsEntry  

slbNewNwclssCfgNetworkElementsNcId 1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.1
ID of network class which owns network element.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbNewNwclssCfgNetworkElementsId 1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.2
Network class ID.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbNewNwclssCfgNetworkElementsNetType 1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.3
The type of network.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER subnet(1), range(2)  

slbNewNwclssCfgNetworkElementsIp 1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.4
IP address of network element.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

slbNewNwclssCfgNetworkElementsMask 1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.5
Subnet mask of network element.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

slbNewNwclssCfgNetworkElementsFromIp 1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.6
From IP address of network element.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

slbNewNwclssCfgNetworkElementsToIp 1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.7
To IP address of network element.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

slbNewNwclssCfgNetworkElementsIpv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.8
The IPv6 address of network element. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..40)  

slbNewNwclssCfgNetworkElementsPrefixLen 1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.9
The prefix length associated with the network IP address .
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..128  

slbNewNwclssCfgNetworkElementsFromIpv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.10
The from IPv6 address of network element. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..40)  

slbNewNwclssCfgNetworkElementsToIpv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.11
The to IPv6 address of network element. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..40)  

slbNewNwclssCfgNetworkElementsMatchType 1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.12
The match type of network element.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER include(1), exclude(2)  

slbNewNwclssCfgNetworkElementsDel 1.3.6.1.4.1.1872.2.5.4.1.1.22.4.1.13
By setting the value to delete(2), the entire row is deleted.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

cachStatSummTotObj 1.3.6.1.4.1.1872.2.5.4.2.23.1.1
Number of Objects served by cache within the measuring period.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cachStatSummHitPerc 1.3.6.1.4.1.1872.2.5.4.2.23.1.2
Percent of HTTP requests served by objects from cache.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cachStatSummServRate 1.3.6.1.4.1.1872.2.5.4.2.23.1.3
Rate of requests served by cache every second.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cachStatSummNewCachedObj 1.3.6.1.4.1.1872.2.5.4.2.23.1.4
Amount of new objects cached during the measuring period.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cachStatSummRateNewCachedObj 1.3.6.1.4.1.1872.2.5.4.2.23.1.5
Average number of new objects cached every second.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cachStatSummNewCachedBytes 1.3.6.1.4.1.1872.2.5.4.2.23.1.6
Amount of new bytes cached during the measuring period.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cachStatSummRateNewCachedBytes 1.3.6.1.4.1.1872.2.5.4.2.23.1.7
Average number of new bytes cached every second.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cachStatSummObjSmaller10K 1.3.6.1.4.1.1872.2.5.4.2.23.1.8
Amount of objects cached during last measuring period of size smaller than 10KB.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cachStatSummObj11KTO50K 1.3.6.1.4.1.1872.2.5.4.2.23.1.9
Amount of objects cached during last measuring period of size between 11KB and 50KB.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cachStatSummObj51KTO100K 1.3.6.1.4.1.1872.2.5.4.2.23.1.10
Amount of objects cached during last measuring period of size between 51KB and 100KB.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cachStatSummObj101KTO1M 1.3.6.1.4.1.1872.2.5.4.2.23.1.11
Amount of objects cached during last measuring period of size between 101KB and 1MB.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cachStatSummObjLarger1M 1.3.6.1.4.1.1872.2.5.4.2.23.1.12
Amount of objects cached during last measuring period of size larger than 1MB.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cachPerServStatTable 1.3.6.1.4.1.1872.2.5.4.2.23.1.13
A table for cache statistics per virtual service.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CachPerServStatEntry

cachPerServStatEntry 1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1
The row definition for cache statistics per virtual service table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CachPerServStatEntry  

cachStatPerServVirtServIndex 1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.1
Virtual server index.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

cachStatPerServVirtServiceIndex 1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.2
Virtual server service index.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

cachStatPerServVirtServPort 1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.3
Virtual server service port number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

cachStatPerServCachePolId 1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.4
Cache policy identifier associated with the virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cachStatPerServTotObj 1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.5
Number of objects served by cache during the measuring period for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cachStatPerServHitPerc 1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.6
Percent of HTTP requests served by objects from cache for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cachStatPerServServRate 1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.7
Rate of requests served by cache every second for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cachStatPerServNewCachedObj 1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.8
Amount of new objects cached during the measuring period for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cachStatPerServRateNewCachedObj 1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.9
Average number of new objects cached every second for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cachStatPerServNewCachedBytes 1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.10
Amount of new bytes cached during the measuring period for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cachStatPerServRateNewCachedBytes 1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.11
Average number of new bytes cached every second for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cachStatPerServObjSmaller10K 1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.12
Amount of objects cached during last measuring period of size smaller than 10KB for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cachStatPerServObj11KTO50K 1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.13
Amount of objects cached during last measuring period of size between 11KB and 50KB for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cachStatPerServObj51KTO100K 1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.14
Amount of objects cached during last measuring period of size between 51KB and 100KB for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cachStatPerServObj101KTO1M 1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.15
Amount of objects cached during last measuring period of size between 101KB and 1MB for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cachStatPerServObjLarger1M 1.3.6.1.4.1.1872.2.5.4.2.23.1.13.1.16
Amount of objects cached during last measuring period of size larger than 1MB for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cachPerRuleListStatsTable 1.3.6.1.4.1.1872.2.5.4.2.23.1.14
A table for cache statistics per rule list.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CachPerRuleListStatsEntry

cachPerRuleListStatsEntry 1.3.6.1.4.1.1872.2.5.4.2.23.1.14.1
The row definition for cache statistics per rule list table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CachPerRuleListStatsEntry  

cachRuleListIndex 1.3.6.1.4.1.1872.2.5.4.2.23.1.14.1.1
Cache rule list index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cachRuleListId 1.3.6.1.4.1.1872.2.5.4.2.23.1.14.1.2
Cache rule list identifier.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cachRuleListNumOfObjCac 1.3.6.1.4.1.1872.2.5.4.2.23.1.14.1.3
Number of objects cached by this rule list.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cachRuleListNumOfBytesCac 1.3.6.1.4.1.1872.2.5.4.2.23.1.14.1.4
Number of bytes cached by this rule list.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cachPerRuleStatsTable 1.3.6.1.4.1.1872.2.5.4.2.23.1.15
A table for cache statistics per rule.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CachPerRuleStatsEntry

cachPerRuleStatsEntry 1.3.6.1.4.1.1872.2.5.4.2.23.1.15.1
The row definition for cache statistics per rule table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CachPerRuleStatsEntry  

cachRuleRuleListIndex 1.3.6.1.4.1.1872.2.5.4.2.23.1.15.1.1
Cache rule rule-list index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cachRuleIndex 1.3.6.1.4.1.1872.2.5.4.2.23.1.15.1.2
Cache rule number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cachRuleRuleListId 1.3.6.1.4.1.1872.2.5.4.2.23.1.15.1.3
Cache rule rule-list identifier.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cachRuleNumOfObjCac 1.3.6.1.4.1.1872.2.5.4.2.23.1.15.1.4
Number of objects cached by the rule.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cachRuleNumOfBytesCac 1.3.6.1.4.1.1872.2.5.4.2.23.1.15.1.5
Number of bytes cached by the rule.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

compUnCompressedThrputKB 1.3.6.1.4.1.1872.2.5.4.2.23.2.1
Total throughput of compressible object before compression counted during measuring period.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

compAvgSizeBefCompKB 1.3.6.1.4.1.1872.2.5.4.2.23.2.2
Average object size before compression.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

compCompressedThrputKB 1.3.6.1.4.1.1872.2.5.4.2.23.2.3
Total throughput of compressible objects after compression counted during measuring period.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

compAvgSizeAftCompKB 1.3.6.1.4.1.1872.2.5.4.2.23.2.4
Average object size after compression.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

compAvgCompRatio 1.3.6.1.4.1.1872.2.5.4.2.23.2.5
Average compression ratio during measuring period.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

compThrputCompRatio 1.3.6.1.4.1.1872.2.5.4.2.23.2.6
Effective compression ratio out of total traffic.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

compStatPerServTable 1.3.6.1.4.1.1872.2.5.4.2.23.2.7
A table for compression statistics per virtual service.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CompStatPerServEntry

compStatPerServEntry 1.3.6.1.4.1.1872.2.5.4.2.23.2.7.1
The row definition for compression statistics per virtual service table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CompStatPerServEntry  

compStatPerServVirtServIndex 1.3.6.1.4.1.1872.2.5.4.2.23.2.7.1.1
Virtual server number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

compStatPerServVirtServiceIndex 1.3.6.1.4.1.1872.2.5.4.2.23.2.7.1.2
Virtual server service index.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

compStatPerServVirtServPort 1.3.6.1.4.1.1872.2.5.4.2.23.2.7.1.3
Virtual server service port number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

compStatPerServCompPolId 1.3.6.1.4.1.1872.2.5.4.2.23.2.7.1.4
Compression policy identifier associated with the virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

compStatPerServUnComprTputKb 1.3.6.1.4.1.1872.2.5.4.2.23.2.7.1.5
Total throughput of compressible object before compression counted during measuring period for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

compStatPerServComprTputKb 1.3.6.1.4.1.1872.2.5.4.2.23.2.7.1.6
Total throughput of compressible objects after compression counted during measuring period for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

compStatPerServAvgSizeBefComp 1.3.6.1.4.1.1872.2.5.4.2.23.2.7.1.7
Average object size before compression for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

compStatPerServAvgSizeAftComp 1.3.6.1.4.1.1872.2.5.4.2.23.2.7.1.8
Average object size after compression for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

compStatPerServAvgCompRatio 1.3.6.1.4.1.1872.2.5.4.2.23.2.7.1.9
Average compression ratio during measuring period for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

compStatPerServThrputCompRatio 1.3.6.1.4.1.1872.2.5.4.2.23.2.7.1.10
Effective compression ratio out of total traffic for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

compPerBrowRuleListStatsTable 1.3.6.1.4.1.1872.2.5.4.2.23.2.8
A table for compression statistics per rule list.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CompPerBrowRuleListStatsEntry

compPerBrowRuleListStatsEntry 1.3.6.1.4.1.1872.2.5.4.2.23.2.8.1
The row definition for compression statistics per rule list table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CompPerBrowRuleListStatsEntry  

compBrowRuleListIndex 1.3.6.1.4.1.1872.2.5.4.2.23.2.8.1.1
Compression browsing rule list index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

compBrowRuleListId 1.3.6.1.4.1.1872.2.5.4.2.23.2.8.1.2
Compression browsing rule list identifier.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

compBrowRuleListNumOfObj 1.3.6.1.4.1.1872.2.5.4.2.23.2.8.1.3
Number of objects matched by this rule-list during measuring period.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

compBrowRuleListSizeBefComp 1.3.6.1.4.1.1872.2.5.4.2.23.2.8.1.4
Total size of all matched objects by this browser rule-list before compression.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

compBrowRuleListSizeAftComp 1.3.6.1.4.1.1872.2.5.4.2.23.2.8.1.5
Total size of all matched objects by this browser rule-list after compression.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

compBrowRuleListCompRatio 1.3.6.1.4.1.1872.2.5.4.2.23.2.8.1.6
Compression ratio per rule list.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

compPerBrowRuleStatsTable 1.3.6.1.4.1.1872.2.5.4.2.23.2.9
A table for compression statistics per browser rule.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CompPerBrowRuleStatsEntry

compPerBrowRuleStatsEntry 1.3.6.1.4.1.1872.2.5.4.2.23.2.9.1
The row definition for compression statistics per browser rule.
Status: current Access: not-accessible
OBJECT-TYPE    
  CompPerBrowRuleStatsEntry  

compBrowRuleRuleListIndex 1.3.6.1.4.1.1872.2.5.4.2.23.2.9.1.1
Compression browser rule rule-list index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

compBrowRuleIndex 1.3.6.1.4.1.1872.2.5.4.2.23.2.9.1.2
Compression browser rule index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

compBrowRuleRuleListId 1.3.6.1.4.1.1872.2.5.4.2.23.2.9.1.3
Compression browser rule rule-list identifier.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

compBrowRuleNumOfObj 1.3.6.1.4.1.1872.2.5.4.2.23.2.9.1.4
Number of objects matched by this browser rule during measuring period.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

compBrowRuleSizeBefComp 1.3.6.1.4.1.1872.2.5.4.2.23.2.9.1.5
Total size of all matched objects for this browser rule before compression.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

compBrowRuleSizeAftComp 1.3.6.1.4.1.1872.2.5.4.2.23.2.9.1.6
Total size of all matched objects for this browser rule after compression.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

compBrowRuleCompRatio 1.3.6.1.4.1.1872.2.5.4.2.23.2.9.1.7
Compression ratio per browser rule.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

compPerUrlRuleListStatsTable 1.3.6.1.4.1.1872.2.5.4.2.23.2.10
A table for compression statistics per URL Rule list.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CompPerUrlRuleListStatsEntry

compPerUrlRuleListStatsEntry 1.3.6.1.4.1.1872.2.5.4.2.23.2.10.1
The row definition for this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CompPerUrlRuleListStatsEntry  

compUrlRuleListIndex 1.3.6.1.4.1.1872.2.5.4.2.23.2.10.1.1
Compression url rule list index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

compUrlRuleListId 1.3.6.1.4.1.1872.2.5.4.2.23.2.10.1.2
Compression url rule list identifier.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

compUrlRuleListNumOfObj 1.3.6.1.4.1.1872.2.5.4.2.23.2.10.1.3
Number of objects matched by this url rule list during measuring period.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

compUrlRuleListSizeBefComp 1.3.6.1.4.1.1872.2.5.4.2.23.2.10.1.4
Total size of all matched objects for this url rule list before compression.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

compUrlRuleListSizeAftComp 1.3.6.1.4.1.1872.2.5.4.2.23.2.10.1.5
Total size of all matched objects this url rule list after compression.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

compUrlRuleListCompRatio 1.3.6.1.4.1.1872.2.5.4.2.23.2.10.1.6
Compression ratio for this url rule list.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

compPerUrlRuleStatsTable 1.3.6.1.4.1.1872.2.5.4.2.23.2.11
A table for compression statistics per URL Rule.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CompPerUrlRuleStatsEntry

compPerUrlRuleStatsEntry 1.3.6.1.4.1.1872.2.5.4.2.23.2.11.1
The row definition for this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CompPerUrlRuleStatsEntry  

compUrlRuleRuleListIndex 1.3.6.1.4.1.1872.2.5.4.2.23.2.11.1.1
Compression url rule rule-list index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

compUrlRuleIndex 1.3.6.1.4.1.1872.2.5.4.2.23.2.11.1.2
Compression url rule index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

compUrlRuleRuleListId 1.3.6.1.4.1.1872.2.5.4.2.23.2.11.1.3
Compression url rule rule-list identifier.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

compUrlRuleNumOfObj 1.3.6.1.4.1.1872.2.5.4.2.23.2.11.1.4
Number of objects matched by this url rule during measuring period.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

compUrlRuleSizeBefComp 1.3.6.1.4.1.1872.2.5.4.2.23.2.11.1.5
Total size of all matched objects for this url rule before compression.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

compUrlRuleSizeAftComp 1.3.6.1.4.1.1872.2.5.4.2.23.2.11.1.6
Total size of all matched objects for this url rule after compression.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

compUrlRuleCompRatio 1.3.6.1.4.1.1872.2.5.4.2.23.2.11.1.7
Compression ratio for this url rule.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sslOffNewHandShake 1.3.6.1.4.1.1872.2.5.4.2.16.11
Number of new SSL handshakes between clients and AAS per second.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sslOffReusedHandShake 1.3.6.1.4.1.1872.2.5.4.2.16.12
Number of existing SSL handshakes reused by clients to communicate with AAS per second.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sslOffPerReusedHandShake 1.3.6.1.4.1.1872.2.5.4.2.16.13
Percentage of SSL session re-using keys.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sslOffPercSessUsingSSLv2 1.3.6.1.4.1.1872.2.5.4.2.16.14
Percentage of session using SSLv2 out of all session during measuring period.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sslOffPercSessUsingSSLv3 1.3.6.1.4.1.1872.2.5.4.2.16.15
Percentage of session using SSLv3 out of all session during measuring period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

sslOffPercSessUsingTLS 1.3.6.1.4.1.1872.2.5.4.2.16.16
Percentage of session using TLS1.0 out of all session during measuring period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

sslOffPerServStatsTable 1.3.6.1.4.1.1872.2.5.4.2.16.17
A table for SSL statistics per virtual service.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SslOffPerServStatsEntry

sslOffPerServStatsEntry 1.3.6.1.4.1.1872.2.5.4.2.16.17.1
The row definition for SSL statistics per virtual service table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SslOffPerServStatsEntry  

sslOffPerServVirtServIndex 1.3.6.1.4.1.1872.2.5.4.2.16.17.1.1
Virtual server number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sslOffPerServVirtServiceIndex 1.3.6.1.4.1.1872.2.5.4.2.16.17.1.2
Virtual server service index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sslOffPerServVirtServPort 1.3.6.1.4.1.1872.2.5.4.2.16.17.1.3
Virtual server service port number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sslOffPerServSslPolId 1.3.6.1.4.1.1872.2.5.4.2.16.17.1.4
SSL policy identifier associated with the virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

sslOffPerServNewhandShake 1.3.6.1.4.1.1872.2.5.4.2.16.17.1.5
Number of New SSL handshakes between Clients and AAS per second for this virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sslOffPerServReusedhandShake 1.3.6.1.4.1.1872.2.5.4.2.16.17.1.6
Number of existing SSL handshakes re-used by clients to communicate with AAS per second for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sslOffPerServPercReusedhandShake 1.3.6.1.4.1.1872.2.5.4.2.16.17.1.7
Percentage of SSL session re-using keys for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sslOffPerServSessUsingSSLv2 1.3.6.1.4.1.1872.2.5.4.2.16.17.1.8
Percentage of session using SSLv2 out of all session during measuring period for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sslOffPerServSessUsingSSLv3 1.3.6.1.4.1.1872.2.5.4.2.16.17.1.9
Percentage of session using SSLv3 out of all session during measuring period for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sslOffPerServSessUsingTLS 1.3.6.1.4.1.1872.2.5.4.2.16.17.1.10
Percentage of session using TLS1.0 out of all session during measuring period for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sslOffPerServSessUsingTLS11 1.3.6.1.4.1.1872.2.5.4.2.16.17.1.11
Percentage of session using TLS1.1 out of all session during measuring period for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sslOffPercSessUsingTLS11 1.3.6.1.4.1.1872.2.5.4.2.16.18
Percentage of session using TLS1.1 out of all session during measuring period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

httpStatSummCliusingKeepAliv 1.3.6.1.4.1.1872.2.5.4.2.24.1
Number of clients sending connection: keep-alive.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

httpStatSummHTTP10Per 1.3.6.1.4.1.1872.2.5.4.2.24.2
Percent of requests done using HTTP 1.0 during the measuring period.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

httpStatSummHTTP11Per 1.3.6.1.4.1.1872.2.5.4.2.24.3
Percent of requests done using HTTP 1.1 during measuring period.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

httpStatSummHttpToHttpsRedir 1.3.6.1.4.1.1872.2.5.4.2.24.4
Number of HTTP redirect location headers updated from HTTP to HTTPS by AAS.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

httpStatSummAvgNumReqPerConn 1.3.6.1.4.1.1872.2.5.4.2.24.5
The average number of requests done over each client connection.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

httpStatSummResSmall1Kb 1.3.6.1.4.1.1872.2.5.4.2.24.6
Number of responses for which content size reported smaller than 1KB.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

httpStatSummRes1KbTo10Kb 1.3.6.1.4.1.1872.2.5.4.2.24.7
Number of responses for which content size reported between 1KB and 10KB.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

httpStatSummRes11KbTo50Kb 1.3.6.1.4.1.1872.2.5.4.2.24.8
Number of responses for which content size reported between 11KB and 50KB.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

httpStatSummRes51KbTo100Kb 1.3.6.1.4.1.1872.2.5.4.2.24.9
Number of responses for which content size reported between 51KB and 100KB.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

httpStatSummResLarger100Kb 1.3.6.1.4.1.1872.2.5.4.2.24.10
Number of responses for which content size reported larger than 100KB.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

httpTransSummReqCliToAas 1.3.6.1.4.1.1872.2.5.4.2.24.11
Number of clients requests from AAS done in the measuring period .
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

httpTransSummReqAasToSer 1.3.6.1.4.1.1872.2.5.4.2.24.12
Number of AAS requests from servers done in the measuring period.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

httpTransSummResSerToAas 1.3.6.1.4.1.1872.2.5.4.2.24.13
Number of servers responses to AAS in the measuring period.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

httpTransSummResAasToCli 1.3.6.1.4.1.1872.2.5.4.2.24.14
Number of AAS responses to clients in the measuring period.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

httpTransSummTransRate 1.3.6.1.4.1.1872.2.5.4.2.24.15
HTTP transactions per second.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

httpPerServStatsTable 1.3.6.1.4.1.1872.2.5.4.2.24.16
A table for HTTP statistics per virtual service.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HttpPerServStatsEntry

httpPerServStatsEntry 1.3.6.1.4.1.1872.2.5.4.2.24.16.1
The row definition for HTTP statistics per virtual service table.
Status: current Access: not-accessible
OBJECT-TYPE    
  HttpPerServStatsEntry  

httpPerServStatsVirtServIndex 1.3.6.1.4.1.1872.2.5.4.2.24.16.1.1
Virtual server number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

httpPerServStatsVirtServiceIndex 1.3.6.1.4.1.1872.2.5.4.2.24.16.1.2
Virtual server service index.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

httpPerServStatsVirtServPort 1.3.6.1.4.1.1872.2.5.4.2.24.16.1.3
Virtual server service port number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

httpPerServStatsCliUseKeepAlive 1.3.6.1.4.1.1872.2.5.4.2.24.16.1.4
Number of clients sending Connection: Keep-Alive for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

httpPerServStatsHttp10VsHttp11Ratio 1.3.6.1.4.1.1872.2.5.4.2.24.16.1.5
Ratio of requests done using HTTP 1.0 and HTTP 1.1 during measuring period for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

httpPerServStatsHttpToHTTPSRedir 1.3.6.1.4.1.1872.2.5.4.2.24.16.1.6
Number of HTTP redirect location headers updated from HTTP to HTTPS by AAS for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

httpPerServStatsAvgNumReqPerConn 1.3.6.1.4.1.1872.2.5.4.2.24.16.1.7
The average number of requests done over each client connection for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

httpPerServStatsRespSmall1Kb 1.3.6.1.4.1.1872.2.5.4.2.24.16.1.8
Number of responses for which content size reported smaller than 1KB for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

httpPerServStatsResp1KbTo10Kb 1.3.6.1.4.1.1872.2.5.4.2.24.16.1.9
Number of responses for which content size reported between 1KB and 10KB for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

httpPerServStatsResp11KbTo50Kb 1.3.6.1.4.1.1872.2.5.4.2.24.16.1.10
Number of responses for which content size reported between 11KB and 50KB for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

httpPerServStatsResp51KbTo100Kb 1.3.6.1.4.1.1872.2.5.4.2.24.16.1.11
Number of responses for which content size reported between 51KB and 100KB for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

httpPerServStatsRespLarger100Kb 1.3.6.1.4.1.1872.2.5.4.2.24.16.1.12
Number of responses for which content size reported larger than 100KB for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

httpPerServStatsReqCliToAas 1.3.6.1.4.1.1872.2.5.4.2.24.16.1.13
Number of clients requests from AAS done in the measuring period for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

httpPerServStatsReqAasToSer 1.3.6.1.4.1.1872.2.5.4.2.24.16.1.14
Number of AAS requests from servers done in the measuring period for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

httpPerServStatsRespSerToAas 1.3.6.1.4.1.1872.2.5.4.2.24.16.1.15
Number of servers responses to AAS in the measuring period for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

httpPerServStatsRespAasToCli 1.3.6.1.4.1.1872.2.5.4.2.24.16.1.16
Number of AAS responses to clients in the measuring period for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

httpPerServStatsTransRate 1.3.6.1.4.1.1872.2.5.4.2.24.16.1.17
Transactions rate for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

connmngStatSummServConn 1.3.6.1.4.1.1872.2.5.4.2.24.17.1
Number of concurrent backend server connections.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

connmngStatSummCliReq 1.3.6.1.4.1.1872.2.5.4.2.24.17.2
Number of client requests passed to AX.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

connmngStatSummMulRatio 1.3.6.1.4.1.1872.2.5.4.2.24.17.3
Connection multiplexing ratio.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

connmngPerServStatsTable 1.3.6.1.4.1.1872.2.5.4.2.24.17.4
A table for connection management statistics per virtual service.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ConnmngPerServStatsEntry

connmngPerServStatsEntry 1.3.6.1.4.1.1872.2.5.4.2.24.17.4.1
The row definition for connection management statistics per virtual service table.
Status: current Access: not-accessible
OBJECT-TYPE    
  ConnmngPerServStatsEntry  

connmngPerServStatsVirtServIndex 1.3.6.1.4.1.1872.2.5.4.2.24.17.4.1.1
Virtual server number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

connmngPerServStatsVirtServiceIndex 1.3.6.1.4.1.1872.2.5.4.2.24.17.4.1.2
Virtual server service index.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

connmngPerServStatsVirtServPort 1.3.6.1.4.1.1872.2.5.4.2.24.17.4.1.3
Virtual server service port number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

connmngPerServStatsServConn 1.3.6.1.4.1.1872.2.5.4.2.24.17.4.1.4
Number of concurrent backend server connections for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

connmngPerServStatsCliReq 1.3.6.1.4.1.1872.2.5.4.2.24.17.4.1.5
Number of client requests passed to AX for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

connmngPerServStatsMulRatio 1.3.6.1.4.1.1872.2.5.4.2.24.17.4.1.6
Connection multiplexing ratio for virtual service.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbSapAslrTableMaxSize 1.3.6.1.4.1.1872.2.5.4.1.1.20.1
The maximum number of entries in SAP ASLR connection management table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgSapAslrTable 1.3.6.1.4.1.1872.2.5.4.1.1.20.2
The SAP ASLR connection management table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbCurCfgSapAslrEntry

slbCurCfgSapAslrEntry 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1
A row in the SAP ASLR connection management table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbCurCfgSapAslrEntry  

slbCurCfgSapAslrIndex 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.1
The Sap Aslr number
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbCurCfgSapAslrIpAddr 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.2
IP address of the Sap Aslr identified by the instance of the slbCurCfgSapAslrIndex.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slbCurCfgSapAslrIpv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.3
IPV6 address of the Sap Aslr manager identified by the instance of the slbCurCfgSapAslrIndex Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

slbCurCfgSapAslrIpVer 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.4
The type of IP address.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2)  

slbCurCfgSapAslrPortNum 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.5
The Sap Aslr service port number.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 2..65534  

slbCurCfgSapAslrVipAddr 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.6
IP address of the VIP identified by the instance of the slbNewCfgSapAslrIndex.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

slbCurCfgSapAslrVipv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.7
IPV6 address of the VIP identified by the instance of the slbNewCfgSapAslrIndex Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

slbCurCfgSapAslrVipIpVer 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.8
The type of VIP IP address.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2)  

slbCurCfgSapAslrInterval 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.9
Set the Sap Aslr server inspection interval.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..60  

slbCurCfgSapAslrState 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.10
Enable or disable the Sap Aslr server sampling.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbCurCfgSapAslrName 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.11
The name of the Sap Aslr connection.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbCurCfgSapAslrLastAct 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.12
The Sap Aslr connection last activity time stamp.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbCurCfgSapAslrAutoConfig 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.13
Defines the configuration update process. When set the value to basic (1), the configuration is limited, comparing to full (2)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER basic(1), full(2)  

slbCurCfgSapAslrSessionInfo 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.14
Set the Sap Aslr session information. When read, zero is returned.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

slbCurCfgSapAslrDelete 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.15
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbCurCfgSapAslrSignature 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.16
The Sap Aslr connection signature.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

slbCurCfgSapAslrServCert 1.3.6.1.4.1.1872.2.5.4.1.1.20.2.1.17
Server Certificate name associated with this virtual service.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbNewCfgSapAslrTable 1.3.6.1.4.1.1872.2.5.4.1.1.20.3
The SAP ASLR connection management table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbNewCfgSapAslrEntry

slbNewCfgSapAslrEntry 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1
A row in the SAP ASLR connection management table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbNewCfgSapAslrEntry  

slbNewCfgSapAslrIndex 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.1
The Sap Aslr number
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

slbNewCfgSapAslrIpAddr 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.2
IP address of the Sap Aslr identified by the instance of the slbNewCfgSapAslrIndex.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

slbNewCfgSapAslrIpv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.3
IPV6 address of the Sap Aslr manager identified by the instance of the slbNewCfgSapAslrIndex Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..40)  

slbNewCfgSapAslrIpVer 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.4
The type of IP address.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2)  

slbNewCfgSapAslrPortNum 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.5
The Sap Aslr service port number.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 2..65534  

slbNewCfgSapAslrVipAddr 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.6
IP address of the VIP identified by the instance of the slbNewCfgSapAslrIndex.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

slbNewCfgSapAslrVipv6Addr 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.7
IPV6 address of the VIP identified by the instance of the slbNewCfgSapAslrIndex Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..40)  

slbNewCfgSapAslrVipIpVer 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.8
The type of VIP IP address.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2)  

slbNewCfgSapAslrInterval 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.9
Set the Sap Aslr server inspection interval.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 4..60  

slbNewCfgSapAslrState 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.10
Enable or disable the Sap Aslr server sampling.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

slbNewCfgSapAslrName 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.11
The name of the Sap Aslr connection.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbNewCfgSapAslrLastAct 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.12
The Sap Aslr last activity time stamp.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..31)  

slbNewCfgSapAslrAutoConfig 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.13
Defines the configuration update process. When set the value to basic (1), the configuration is limited, comparing to full (2)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER basic(1), full(2)  

slbNewCfgSapAslrSessionInfo 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.14
Set the Sap Aslr session information. When read, zero is returned.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

slbNewCfgSapAslrDelete 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.15
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

slbNewCfgSapAslrSignature 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.16
The Sap Aslr connection signature.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..40)  

slbNewCfgSapAslrServCert 1.3.6.1.4.1.1872.2.5.4.1.1.20.3.1.17
Server Certificate name associated with this virtual service.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

slbStatSapAslrTable 1.3.6.1.4.1.1872.2.5.4.2.25.1
The sap aslrr statistics table. This table shows the statistics of sap aslr for a particular vip.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlbStatSapAslrEntry

slbStatSapAslrEntry 1.3.6.1.4.1.1872.2.5.4.2.25.1.1
A row in the sap aslr statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlbStatSapAslrEntry  

slbStatSapAslrIndex 1.3.6.1.4.1.1872.2.5.4.2.25.1.1.1
The Sap Aslr table index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

slbStatSapAslrSampling 1.3.6.1.4.1.1872.2.5.4.2.25.1.1.2
The number of Sap Aslr server lookups.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSapAslrFailure 1.3.6.1.4.1.1872.2.5.4.2.25.1.1.3
The number of Sap Aslr server lookup failures.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSapAslrDeviceUpdates 1.3.6.1.4.1.1872.2.5.4.2.25.1.1.4
The number of Alteon automated configuration updates.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSapAslrDeviceFailure 1.3.6.1.4.1.1872.2.5.4.2.25.1.1.5
The number of Alteon automated configuration failure.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

slbStatSapAslrLastAct 1.3.6.1.4.1.1872.2.5.4.2.25.1.1.6
The Sap Aslr last activity time stamp.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)