ALCATEL-IND1-VIRTUALROUTER-MIB

File: ALCATEL-IND1-VIRTUALROUTER-MIB.mib (18187 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMP-FRAMEWORK-MIB
SNMPv2-CONF ALCATEL-IND1-BASE

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
Unsigned32 RowStatus TruthValue
SnmpAdminString MODULE-COMPLIANCE OBJECT-GROUP
routingIND1Vrf

Defined Types

AlaVirtualRouterNameEntry  
SEQUENCE    
  alaVirtualRouterName SnmpAdminString
  alaVirtualRouterNameIndex Integer32
  alaVirtualRouterNameRowStatus RowStatus
  alaVirtualRouterProfile SnmpAdminString
  alaVirtualRouterMaxRouteMaps Integer32
  alaVirtualRouterMaxSequences Integer32
  alaVirtualRouterMaxTlvs Integer32
  alaVirtualRouterMaxAccessLists Integer32
  alaVirtualRouterMaxAddressBlocks Integer32
  alaVirtualRouterMaxMatchInterfaces Integer32
  alaVirtualRouterNoAutoLoadVrrp TruthValue

AlaVrConfigEntry  
SEQUENCE    
  alaVrConfigIndex Integer32
  alaVrConfigRipStatus INTEGER
  alaVrConfigOspfStatus INTEGER
  alaVrConfigIsisStatus INTEGER
  alaVrConfigBgpStatus INTEGER
  alaVrConfigPimStatus INTEGER
  alaVrConfigDvmrpStatus INTEGER
  alaVrConfigRipngStatus INTEGER
  alaVrConfigOspf3Status INTEGER
  alaVrConfigMplsLdpStatus INTEGER
  alaVrConfigVrrpStatus INTEGER

AlaVirtualRouterProfileEntry  
SEQUENCE    
  alaVirtualRouterProfileName SnmpAdminString
  alaVirtualRouterProfileMaxRouteMaps Integer32
  alaVirtualRouterProfileMaxSequences Integer32
  alaVirtualRouterProfileMaxTlvs Integer32
  alaVirtualRouterProfileMaxAccessLists Integer32
  alaVirtualRouterProfileMaxAddressBlocks Integer32
  alaVirtualRouterProfileMaxMatchInterfaces Integer32

Defined Values

alcatelIND1VirtualRouterMIB 1.3.6.1.4.1.6486.801.1.2.1.10.15.1
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): This proprietary MIB contains management information for the configuration of Virtual Router instances. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2006 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
MODULE-IDENTITY    

alcatelIND1VirtualRouterMIBObjects 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1
OBJECT IDENTIFIER    

alaVirtualRouterConfig 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1
OBJECT IDENTIFIER    

alaVirtualRouterNameTable 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1
Table containing Virtual Router Name to Virtual Router Index bindings. There is always an entry for the default Virtual Router which has the name default
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaVirtualRouterNameEntry

alaVirtualRouterNameEntry 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1
Each entry binds a Virtual Router Name to a Virtual Router index.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaVirtualRouterNameEntry  

alaVirtualRouterName 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1.1
The name of a Virtual Router.
Status: current Access: not-accessible
OBJECT-TYPE    
  SnmpAdminString Size(1..20)  

alaVirtualRouterNameIndex 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1.2
The index associated with the Virtual Router name.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

alaVirtualRouterNameRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1.3
Controls creation and deletion of Row Status entries.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

alaVirtualRouterProfile 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1.4
The profile name of the VRF. Profiles place constraints on what the VRF can contain.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(1..20)  

alaVirtualRouterMaxRouteMaps 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1.5
The maximum number of route-maps allowed in this VRF.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

alaVirtualRouterMaxSequences 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1.6
The maximum number of route-map sequences allowed in this VRF.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

alaVirtualRouterMaxTlvs 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1.7
The maximum number of route-map TLV blocks allowed in this VRF.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

alaVirtualRouterMaxAccessLists 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1.8
The maximum number of access-lists allowed in this VRF.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

alaVirtualRouterMaxAddressBlocks 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1.9
The maximum number of access-list address blocks allowed in this VRF.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

alaVirtualRouterMaxMatchInterfaces 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1.10
The maximum number of route-map match interfaces allowed in this VRF.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

alaVirtualRouterNoAutoLoadVrrp 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1.11
If true, do not automatically load VRRP in max profile VRF.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

alaVrConfigTable 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2
Table containing Virtual Router protocol configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaVrConfigEntry

alaVrConfigEntry 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1
Each entry exists for each VRF in the alaVrtualRouterNameTable. The entry represents the status of routing protocols on a VRF instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaVrConfigEntry  

alaVrConfigIndex 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1.1
The index associated with the Virtual Router name.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

alaVrConfigRipStatus 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1.2
Controls the load status of RIP on this router. Loaded(1) is the only valid Set value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER loaded(1), notloaded(2), loading(3)  

alaVrConfigOspfStatus 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1.3
Controls the load status of OSPF on this router. Loaded(1) is the only valid Set value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER loaded(1), notloaded(2), loading(3)  

alaVrConfigIsisStatus 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1.4
Controls the load status of ISIS on this router. Loaded(1) is the only valid Set value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER loaded(1), notloaded(2), loading(3)  

alaVrConfigBgpStatus 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1.5
Controls the load status of BGP on this router. Loaded(1) is the only valid Set value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER loaded(1), notloaded(2), loading(3)  

alaVrConfigPimStatus 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1.6
Controls the load status of PIM on this router. Loaded(1) is the only valid Set value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER loaded(1), notloaded(2), loading(3)  

alaVrConfigDvmrpStatus 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1.7
Controls the load status of DVMRP on this router. Loaded(1) is the only valid Set value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER loaded(1), notloaded(2), loading(3)  

alaVrConfigRipngStatus 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1.8
Controls the load status of Ripng on this router. Loaded(1) is the only valid Set value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER loaded(1), notloaded(2), loading(3)  

alaVrConfigOspf3Status 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1.9
Controls the load status of OSPFv3 on this router. Loaded(1) is the only valid Set value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER loaded(1), notloaded(2), loading(3)  

alaVrConfigMplsLdpStatus 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1.10
Controls the load status of MPLS LDP on this router. Loaded(1) is the only valid Set value.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER loaded(1), notloaded(2), loading(3)  

alaVrConfigVrrpStatus 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1.11
Controls the load status of VRRP on this router. Loaded(1) is the only valid Set value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER loaded(1), notloaded(2), loading(3)  

alaVirtualRouterProfileTable 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.3
Table contains capabilities of a VRF profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaVirtualRouterProfileEntry

alaVirtualRouterProfileEntry 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.3.1
Each entry defines a VRF profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaVirtualRouterProfileEntry  

alaVirtualRouterProfileName 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.3.1.1
The name of the profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  SnmpAdminString  

alaVirtualRouterProfileMaxRouteMaps 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.3.1.2
The maximum number of route-maps supported in this VRF profile.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

alaVirtualRouterProfileMaxSequences 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.3.1.3
The maximum number of route-map sequences supported in this VRF profile.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

alaVirtualRouterProfileMaxTlvs 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.3.1.4
The maximum number of route-map TLVs supported in this VRF profile. TLVs are used to store match and set clauses.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

alaVirtualRouterProfileMaxAccessLists 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.3.1.5
The maximum number of route-map access-lists supported in this VRF profile. Access-lists contain IPv4 or IPv6 addresses.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

alaVirtualRouterProfileMaxAddressBlocks 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.3.1.6
The maximum number of route-map address blocks supported in this VRF profile. Address blocks are used to hold the access-lists routes.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

alaVirtualRouterProfileMaxMatchInterfaces 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.3.1.7
The maximum number of route-map interfaces that can be configured match clauses supported in this VRF profile.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

alcatelIND1VirtualRouterMIBConformance 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.2
OBJECT IDENTIFIER    

alcatelIND1VirtualRouterMIBCompliances 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.2.1
OBJECT IDENTIFIER    

alcatelIND1VirtualRouterMIBGroups 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.2.2
OBJECT IDENTIFIER    

alaVirtualRouterCompliance 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.2.1.1
The compliance statement for routers running Route Maps and implementing the ALCATEL-IND1-VIRTUALROUTER MIB.
Status: current Access: read-write
MODULE-COMPLIANCE    

alaVirtualRouterConfigMIBGroup 1.3.6.1.4.1.6486.801.1.2.1.10.15.1.2.2.1
A collection of objects to support management of global configuration parameters of the Virtual Router Module.
Status: current Access: read-write
OBJECT-GROUP