ALCATEL-IND1-TIMETRA-VRTR-MIB

File: ALCATEL-IND1-TIMETRA-VRTR-MIB.mib (444947 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-CONF	SNMPv2-TC
INET-ADDRESS-MIB	IF-MIB	IP-FORWARD-MIB
IP-MIB	ALCATEL-IND1-TIMETRA-TC-MIB	ALCATEL-IND1-TIMETRA-GLOBAL-MIB
ALCATEL-IND1-TIMETRA-QOS-MIB	ALCATEL-IND1-TIMETRA-FILTER-MIB	ALCATEL-IND1-TIMETRA-CHASSIS-MIB
ALCATEL-IND1-TIMETRA-PORT-MIB	ALCATEL-IND1-TIMETRA-SERV-MIB	ALCATEL-IND1-TIMETRA-SAP-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	NOTIFICATION-TYPE
Unsigned32	IpAddress	TimeTicks
Integer32	Gauge32	Counter32
MODULE-COMPLIANCE	OBJECT-GROUP	NOTIFICATION-GROUP
TEXTUAL-CONVENTION	DisplayString	RowStatus
TruthValue	MacAddress	TimeStamp
TestAndIncr	InetAddress	InetAddressType
InetAddressPrefixLength	InetAddressIPv6z	InetAddressIPv6
InterfaceIndex	InterfaceIndexOrZero	ipCidrRouteEntry
ipNetToMediaEntry	TmnxVRtrID	IpAddressPrefixLength
TmnxBgpAutonomousSystem	TmnxVRtrIDOrZero	TmnxAdminState
TmnxOperState	TmnxStatus	TmnxPortID
TmnxEncapVal	TNamedItem	TNamedItemOrEmpty
TItemDescription	TItemLongDescription	TmnxServId
TmnxCustId	TmnxTunnelType	TmnxTunnelID
TPolicyStatementNameOrEmpty	TmnxVPNRouteDistinguisher	TCpmProtPolicyID
TDSCPValue	TDSCPValueOrNone	TFCType
TmnxDHCP6MsgType	Dot1PPriority	timetraSRMIBModules
tmnxSRObjs	tmnxSRNotifyPrefix	tmnxSRConfs
TNetworkPolicyID	TIPFilterID	TFilterID
TmnxSlotNum	tmnxPortNotifyPortId	tmnxPortType
svcDhcpLseStateNewCiAddr	svcDhcpLseStateNewChAddr	svcDhcpClientLease
sapPortId	sapEncapValue

Defined Types

TmnxVPNId
The purpose of a VPN-ID is to identify a VPN. The global VPN Identifier format is: 3-octet VPN Authority, organizationally unique ID followed by a 4-octet VPN index identifying the VPN according to OUI.
TEXTUAL-CONVENTION
	OCTET STRING	Size(0..7)

TmnxInetAddrState
The TmnxInetAddrState is the state of an ipv6 address.
TEXTUAL-CONVENTION
	INTEGER	unknown(0), tentative(1), duplicated(2), inaccessible(3), deprecated(4), preferred(5)

TDSCPAppId
DSCP Application identifiers for protocols that generate control traffic on the the Alcatel 7x50 SR router.
TEXTUAL-CONVENTION
	INTEGER	bgp(1), cflowd(2), dhcp(3), dns(4), ftp(5), icmp(6), igmp(7), ldp(8), mld(9), msdp(10), ndis(11), ntp(12), ospf(13), pim(14), radius(15), rip(16), rsvp(17), snmp(18), snmp-notification(19), srrp(20), ssh(21), syslog(22), tacplus(23), telnet(24), tftp(25), traceroute(26), vrrp(27)

TDot1pAppId
IEEE 802.1p priority (Dot1p) Application identifiers for Layer-2 protocols that generate control traffic on the the Alcatel 7x50 SR router.
TEXTUAL-CONVENTION
	INTEGER	arp(1), isis(2), pppoe(3)

VRtrConfEntry
SEQUENCE
	vRtrID	TmnxVRtrID
	vRtrRowStatus	RowStatus
	vRtrAdminState	TmnxAdminState
	vRtrName	TNamedItemOrEmpty
	vRtrMaxNumRoutes	Integer32
	vRtrBgpStatus	TmnxStatus
	vRtrMplsStatus	TmnxStatus
	vRtrOspfStatus	TmnxStatus
	vRtrRipStatus	TmnxStatus
	vRtrRsvpStatus	TmnxStatus
	vRtrEcmpMaxRoutes	Unsigned32
	vRtrAS	TmnxBgpAutonomousSystem
	vRtrNewIfIndex	TestAndIncr
	vRtrLdpStatus	TmnxStatus
	vRtrIsIsStatus	TmnxStatus
	vRtrRouterId	IpAddress
	vRtrTriggeredPolicy	TruthValue
	vRtrConfederationAS	TmnxBgpAutonomousSystem
	vRtrRouteDistinguisher	TmnxVPNRouteDistinguisher
	vRtrMidRouteThreshold	Unsigned32
	vRtrHighRouteThreshold	Unsigned32
	vRtrIllegalLabelThreshold	Unsigned32
	vRtrVpnId	TmnxVPNId
	vRtrDescription	TItemDescription
	vRtrGracefulRestart	TruthValue
	vRtrGracefulRestartType	INTEGER
	vRtrType	INTEGER
	vRtrServiceId	TmnxServId
	vRtrCustId	TmnxCustId
	vRtrIgmpStatus	TmnxStatus
	vRtrMaxNumRoutesLogOnly	TruthValue
	vRtrVrfTarget	TNamedItemOrEmpty
	vRtrVrfExportTarget	TNamedItemOrEmpty
	vRtrVrfImportTarget	TNamedItemOrEmpty
	vRtrPimStatus	TmnxStatus
	vRtrMaxMcastNumRoutes	Integer32
	vRtrMaxMcastNumRoutesLogOnly	TruthValue
	vRtrMcastMidRouteThreshold	Unsigned32
	vRtrIgnoreIcmpRedirect	TruthValue
	vRtrOspfv3Status	TmnxStatus
	vRtrMsdpStatus	TmnxStatus
	vRtrVprnType	INTEGER
	vRtrSecondaryVrfId	TmnxVRtrIDOrZero
	vRtrMldStatus	TmnxStatus
	vRtrIPv6MaxNumRoutes	Integer32
	vRtrIPv6MidRouteThreshold	Unsigned32
	vRtrIPv6HighRouteThreshold	Unsigned32
	vRtrIPv6MaxNumRoutesLogOnly	TruthValue
	vRtrIPv6IgnoreIcmpRedirect	TruthValue
	vRtrMcPathMgmtPlcyName	TNamedItem

VRtrPolicyEntry
SEQUENCE
	vRtrImportPolicy1	TPolicyStatementNameOrEmpty
	vRtrImportPolicy2	TPolicyStatementNameOrEmpty
	vRtrImportPolicy3	TPolicyStatementNameOrEmpty
	vRtrImportPolicy4	TPolicyStatementNameOrEmpty
	vRtrImportPolicy5	TPolicyStatementNameOrEmpty
	vRtrExportPolicy1	TPolicyStatementNameOrEmpty
	vRtrExportPolicy2	TPolicyStatementNameOrEmpty
	vRtrExportPolicy3	TPolicyStatementNameOrEmpty
	vRtrExportPolicy4	TPolicyStatementNameOrEmpty
	vRtrExportPolicy5	TPolicyStatementNameOrEmpty

VRtrStatEntry
SEQUENCE
	vRtrOperState	TmnxOperState
	vRtrDirectRoutes	Gauge32
	vRtrDirectActiveRoutes	Gauge32
	vRtrStaticRoutes	Gauge32
	vRtrStaticActiveRoutes	Gauge32
	vRtrOSPFRoutes	Gauge32
	vRtrOSPFActiveRoutes	Gauge32
	vRtrBGPRoutes	Gauge32
	vRtrBGPActiveRoutes	Gauge32
	vRtrISISRoutes	Gauge32
	vRtrISISActiveRoutes	Gauge32
	vRtrRIPRoutes	Gauge32
	vRtrRIPActiveRoutes	Gauge32
	vRtrAggregateRoutes	Gauge32
	vRtrAggregateActiveRoutes	Gauge32
	vRtrStatConfiguredIfs	Gauge32
	vRtrStatActiveIfs	Gauge32
	vRtrStatIllegalLabels	Counter32
	vRtrStatCurrNumRoutes	Gauge32
	vRtrStatBGPVpnRoutes	Gauge32
	vRtrStatBGPVpnActiveRoutes	Gauge32
	vRtrStatTotalLdpTunnels	Gauge32
	vRtrStatTotalSdpTunnels	Gauge32
	vRtrStatActiveLdpTunnels	Gauge32
	vRtrStatActiveSdpTunnels	Gauge32
	vRtrMulticastRoutes	Gauge32
	vRtrStatActiveARPEntries	Gauge32
	vRtrStatTotalARPEntries	Gauge32
	vRtrV6DirectRoutes	Gauge32
	vRtrV6DirectActiveRoutes	Gauge32
	vRtrV6StaticRoutes	Gauge32
	vRtrV6StaticActiveRoutes	Gauge32
	vRtrV6OSPFRoutes	Gauge32
	vRtrV6OSPFActiveRoutes	Gauge32
	vRtrV6BGPRoutes	Gauge32
	vRtrV6BGPActiveRoutes	Gauge32
	vRtrV6ISISRoutes	Gauge32
	vRtrV6ISISActiveRoutes	Gauge32
	vRtrV6RIPRoutes	Gauge32
	vRtrV6RIPActiveRoutes	Gauge32
	vRtrV6AggregateRoutes	Gauge32
	vRtrV6AggregateActiveRoutes	Gauge32
	vRtrV6StatConfiguredIfs	Gauge32
	vRtrV6StatActiveIfs	Gauge32
	vRtrV6StatIllegalLabels	Counter32
	vRtrV6StatCurrNumRoutes	Gauge32
	vRtrV6StatBGPVpnRoutes	Gauge32
	vRtrV6StatBGPVpnActiveRoutes	Gauge32
	vRtrV6StatTotalLdpTunnels	Gauge32
	vRtrV6StatTotalSdpTunnels	Gauge32
	vRtrV6StatActiveLdpTunnels	Gauge32
	vRtrV6StatActiveSdpTunnels	Gauge32
	vRtrV6MulticastRoutes	Gauge32
	vRtrV6StatActiveNbrEntries	Gauge32
	vRtrV6StatTotalNbrEntries	Gauge32
	vRtrSubMgmtRoutes	Gauge32
	vRtrSubMgmtActiveRoutes	Gauge32
	vRtrStatTotalRsvpTunnels	Gauge32
	vRtrStatActiveRsvpTunnels	Gauge32
	vRtrV6StatTotalRsvpTunnels	Gauge32
	vRtrV6StatActiveRsvpTunnels	Gauge32
	vRtrHostRoutes	Gauge32
	vRtrHostActiveRoutes	Gauge32
	vRtrV6HostRoutes	Gauge32
	vRtrV6HostActiveRoutes	Gauge32
	vRtrStatLocalARPEntries	Gauge32
	vRtrStatStaticARPEntries	Gauge32
	vRtrStatDynamicARPEntries	Gauge32
	vRtrStatManagedARPEntries	Gauge32
	vRtrStatInternalARPEntries	Gauge32
	vRtrManagedRoutes	Gauge32
	vRtrManagedActiveRoutes	Gauge32

VRtrIfEntry
SEQUENCE
	vRtrIfIndex	InterfaceIndex
	vRtrIfRowStatus	RowStatus
	vRtrIfType	INTEGER
	vRtrIfName	TNamedItem
	vRtrIfPortID	TmnxPortID
	vRtrIfChannelID	Unsigned32
	vRtrIfEncapValue	TmnxEncapVal
	vRtrIfAdminState	TmnxAdminState
	vRtrIfOperState	TmnxOperState
	vRtrIfAlias	DisplayString
	vRtrIfPhysicalAddress	MacAddress
	vRtrIfArpTimeout	Unsigned32
	vRtrIfIcmpMaskReply	TruthValue
	vRtrIfIcmpRedirects	TruthValue
	vRtrIfIcmpNumRedirects	Unsigned32
	vRtrIfIcmpRedirectsTime	Unsigned32
	vRtrIfIcmpUnreachables	TruthValue
	vRtrIfIcmpNumUnreachables	Unsigned32
	vRtrIfIcmpUnreachablesTime	Unsigned32
	vRtrIfIcmpTtlExpired	TruthValue
	vRtrIfIcmpNumTtlExpired	Unsigned32
	vRtrIfIcmpTtlExpiredTime	Unsigned32
	vRtrIfNtpBroadcast	TruthValue
	vRtrIfUnnumbered	IpAddress
	vRtrIfMtu	Unsigned32
	vRtrIfQosPolicyId	TNetworkPolicyID
	vRtrIfIngressFilterId	TIPFilterID
	vRtrIfEgressFilterId	TIPFilterID
	vRtrIfDirectedBroadcast	TruthValue
	vRtrIfMplsStatus	TmnxStatus
	vRtrIfUnnumberedIf	DisplayString
	vRtrIfCflowd	INTEGER
	vRtrIfVPNClass	INTEGER
	vRtrIfDescription	TItemLongDescription
	vRtrIfProtocol	BITS
	vRtrIfTosMarkingTrusted	TruthValue
	vRtrIfServiceId	TmnxServId
	vRtrIfArpPopulate	INTEGER
	vRtrIfIPv6ConfigAllowed	TruthValue
	vRtrIfIPv6OperState	TmnxOperState
	vRtrIfIPv6IngressFilterId	TIPFilterID
	vRtrIfIPv6EgressFilterId	TIPFilterID
	vRtrIfIcmpV6Redirects	TruthValue
	vRtrIfIcmpV6NumRedirects	Unsigned32
	vRtrIfIcmpV6RedirectsTime	Unsigned32
	vRtrIfIcmpV6Unreachables	TruthValue
	vRtrIfIcmpV6NumUnreachables	Unsigned32
	vRtrIfIcmpV6UnreachablesTime	Unsigned32
	vRtrIfIcmpV6TimeExceeded	TruthValue
	vRtrIfIcmpV6NumTimeExceeded	Unsigned32
	vRtrIfIcmpV6TimeExceededTime	Unsigned32
	vRtrIfIcmpV6PktTooBig	TruthValue
	vRtrIfIcmpV6NumPktTooBig	Unsigned32
	vRtrIfIcmpV6PktTooBigTime	Unsigned32
	vRtrIfIcmpV6ParamProblem	TruthValue
	vRtrIfIcmpV6NumParamProblem	Unsigned32
	vRtrIfIcmpV6ParamProblemTime	Unsigned32
	vRtrIfLinkLocalAddressType	InetAddressType
	vRtrIfLinkLocalAddress	InetAddress
	vRtrIfLinkLocalAddressState	TmnxInetAddrState
	vRtrIfLastOperStateChange	TimeStamp
	vRtrIfOperMtu	Unsigned32
	vRtrIfGlobalIndex	Unsigned32
	vRtrIfDelaySeconds	Unsigned32
	vRtrIfDelayUpTimer	Integer32
	vRtrIfLocalDhcpServerName	TNamedItemOrEmpty
	vRtrIfInitDelayEnable	TruthValue
	vRtrIfCpmProtPolicyId	TCpmProtPolicyID
	vRtrIfCpmProtUncfgdProtoDropCnt	Gauge32
	vRtrIfLdpSyncTimer	Unsigned32

VRtrIcmp6Entry
SEQUENCE
	vRtrIcmp6InMsgs	Counter32
	vRtrIcmp6InErrors	Counter32
	vRtrIcmp6InDestUnreachs	Counter32
	vRtrIcmp6InAdminProhibs	Counter32
	vRtrIcmp6InTimeExcds	Counter32
	vRtrIcmp6InParmProblems	Counter32
	vRtrIcmp6InPktTooBigs	Counter32
	vRtrIcmp6InEchos	Counter32
	vRtrIcmp6InEchoReplies	Counter32
	vRtrIcmp6InRtrSolicits	Counter32
	vRtrIcmp6InRtrAdvertisements	Counter32
	vRtrIcmp6InNbrSolicits	Counter32
	vRtrIcmp6InNbrAdvertisements	Counter32
	vRtrIcmp6InRedirects	Counter32
	vRtrIcmp6InGrpMembQueries	Counter32
	vRtrIcmp6InGrpMembResponses	Counter32
	vRtrIcmp6InGrpMembReductions	Counter32
	vRtrIcmp6OutMsgs	Counter32
	vRtrIcmp6OutErrors	Counter32
	vRtrIcmp6OutDestUnreachs	Counter32
	vRtrIcmp6OutAdminProhibs	Counter32
	vRtrIcmp6OutTimeExcds	Counter32
	vRtrIcmp6OutParmProblems	Counter32
	vRtrIcmp6OutPktTooBigs	Counter32
	vRtrIcmp6OutEchos	Counter32
	vRtrIcmp6OutEchoReplies	Counter32
	vRtrIcmp6OutRtrSolicits	Counter32
	vRtrIcmp6OutRtrAdvertisements	Counter32
	vRtrIcmp6OutNbrSolicits	Counter32
	vRtrIcmp6OutNbrAdvertisements	Counter32
	vRtrIcmp6OutRedirects	Counter32
	vRtrIcmp6OutGrpMembQueries	Counter32
	vRtrIcmp6OutGrpMembResponses	Counter32
	vRtrIcmp6OutGrpMembReductions	Counter32

VRtrIfIcmp6Entry
SEQUENCE
	vRtrIfIcmp6InMsgs	Counter32
	vRtrIfIcmp6InErrors	Counter32
	vRtrIfIcmp6InDestUnreachs	Counter32
	vRtrIfIcmp6InAdminProhibs	Counter32
	vRtrIfIcmp6InTimeExcds	Counter32
	vRtrIfIcmp6InParmProblems	Counter32
	vRtrIfIcmp6InPktTooBigs	Counter32
	vRtrIfIcmp6InEchos	Counter32
	vRtrIfIcmp6InEchoReplies	Counter32
	vRtrIfIcmp6InRtrSolicits	Counter32
	vRtrIfIcmp6InRtrAdvertisements	Counter32
	vRtrIfIcmp6InNbrSolicits	Counter32
	vRtrIfIcmp6InNbrAdvertisements	Counter32
	vRtrIfIcmp6InRedirects	Counter32
	vRtrIfIcmp6InGrpMembQueries	Counter32
	vRtrIfIcmp6InGrpMembResponses	Counter32
	vRtrIfIcmp6InGrpMembReductions	Counter32
	vRtrIfIcmp6OutMsgs	Counter32
	vRtrIfIcmp6OutErrors	Counter32
	vRtrIfIcmp6OutDestUnreachs	Counter32
	vRtrIfIcmp6OutAdminProhibs	Counter32
	vRtrIfIcmp6OutTimeExcds	Counter32
	vRtrIfIcmp6OutParmProblems	Counter32
	vRtrIfIcmp6OutPktTooBigs	Counter32
	vRtrIfIcmp6OutEchos	Counter32
	vRtrIfIcmp6OutEchoReplies	Counter32
	vRtrIfIcmp6OutRtrSolicits	Counter32
	vRtrIfIcmp6OutRtrSolicitsTime	TimeStamp
	vRtrIfIcmp6OutRtrAdvertisements	Counter32
	vRtrIfIcmp6OutRtrAdvTime	TimeStamp
	vRtrIfIcmp6OutNbrSolicits	Counter32
	vRtrIfIcmp6OutNbrSolicitsTime	TimeStamp
	vRtrIfIcmp6OutNbrAdvertisements	Counter32
	vRtrIfIcmp6OutNbrAdvTime	TimeStamp
	vRtrIfIcmp6OutRedirects	Counter32
	vRtrIfIcmp6OutGrpMembQueries	Counter32
	vRtrIfIcmp6OutGrpMembResponses	Counter32
	vRtrIfIcmp6OutGrpMembReductions	Counter32

VRtrIfBfdEntry
SEQUENCE
	vRtrIfBfdAdminState	TmnxAdminState
	vRtrIfBfdTransmitInterval	Unsigned32
	vRtrIfBfdReceiveInterval	Unsigned32
	vRtrIfBfdMultiplier	Unsigned32
	vRtrIfBfdEchoInterval	Unsigned32

VRtrIfBfdSessionEntry
SEQUENCE
	vRtrIfBfdSessionLclAddrType	InetAddressType
	vRtrIfBfdSessionLclAddr	InetAddress
	vRtrIfBfdSessionRemAddrType	InetAddressType
	vRtrIfBfdSessionRemAddr	InetAddress
	vRtrIfBfdSessionOperState	TmnxOperState
	vRtrIfBfdSessionState	INTEGER
	vRtrIfBfdSessionOperFlags	BITS
	vRtrIfBfdSessionMesgRecv	Counter32
	vRtrIfBfdSessionMesgSent	Counter32
	vRtrIfBfdSessionLastDownTime	TimeStamp
	vRtrIfBfdSessionLastUpTime	TimeStamp
	vRtrIfBfdSessionUpCount	Counter32
	vRtrIfBfdSessionDownCount	Counter32
	vRtrIfBfdSessionLclDisc	Unsigned32
	vRtrIfBfdSessionRemDisc	Unsigned32
	vRtrIfBfdSessionProtocols	BITS
	vRtrIfBfdSessionTxInterval	Unsigned32
	vRtrIfBfdSessionRxInterval	Unsigned32
	vRtrIfBfdSessionType	INTEGER

VRtrIfProxyArpEntry
SEQUENCE
	vRtrIfProxyArp	TruthValue
	vRtrIfProxyArpLocal	TruthValue
	vRtrIfProxyArpPolicy1	TPolicyStatementNameOrEmpty
	vRtrIfProxyArpPolicy2	TPolicyStatementNameOrEmpty
	vRtrIfProxyArpPolicy3	TPolicyStatementNameOrEmpty
	vRtrIfProxyArpPolicy4	TPolicyStatementNameOrEmpty
	vRtrIfProxyArpPolicy5	TPolicyStatementNameOrEmpty

VRtrIfDHCPEntry
SEQUENCE
	vRtrIfDHCPRelayInfoOption	TruthValue
	vRtrIfDHCPRelayInfoAction	INTEGER
	vRtrIfDHCPRelayCircuitId	INTEGER
	vRtrIfDHCPRelayRemoteId	INTEGER
	vRtrIfDHCPAutoFilter	Unsigned32
	vRtrIfDHCPRelayServer1	IpAddress
	vRtrIfDHCPRelayServer2	IpAddress
	vRtrIfDHCPRelayServer3	IpAddress
	vRtrIfDHCPRelayServer4	IpAddress
	vRtrIfDHCPRelayServer5	IpAddress
	vRtrIfDHCPRelayServer6	IpAddress
	vRtrIfDHCPRelayServer7	IpAddress
	vRtrIfDHCPRelayServer8	IpAddress
	vRtrIfDHCPRelayTrusted	TruthValue
	vRtrIfDHCPAdminState	TmnxAdminState
	vRtrIfDHCPSnooping	INTEGER
	vRtrIfDHCPDescription	TItemDescription
	vRtrIfDHCPAutoFilterId	TFilterID
	vRtrIfDHCPOperAutoFilter	Unsigned32
	vRtrIfDHCPAuthPolicy	TPolicyStatementNameOrEmpty
	vRtrIfDHCPLeasePopulate	Unsigned32
	vRtrIfDHCPOperLeasePopulate	Unsigned32
	vRtrIfDHCPGiAddressType	InetAddressType
	vRtrIfDHCPGiAddress	InetAddress
	vRtrIfDHCPGiAddressAsSrc	TruthValue
	vRtrIfDHCPMatchOption82	TruthValue
	vRtrIfDHCPRelayRemoteIdStr	DisplayString
	vRtrIfDHCPProxyAdminState	TmnxAdminState
	vRtrIfDHCPProxyServerAddr	IpAddress
	vRtrIfDHCPProxyLeaseTime	Unsigned32
	vRtrIfDHCPProxyLTRadiusOverride	TruthValue
	vRtrIfDHCPVendorIncludeOptions	BITS
	vRtrIfDHCPVendorOptionString	DisplayString
	vRtrIfDHCPLayer2Header	TruthValue
	vRtrIfDHCPAntiSpoofMacAddr	MacAddress
	vRtrIfDHCPClientApplications	BITS

VRtrIfDHCPRelayStatsEntry
SEQUENCE
	vRtrIfDHCPRelayRxPkts	Counter32
	vRtrIfDHCPRelayTxPkts	Counter32
	vRtrIfDHCPRelayRxMalformedPkts	Counter32
	vRtrIfDHCPRelayRxUntrustedPkts	Counter32
	vRtrIfDHCPRelayClientPktsDiscarded	Counter32
	vRtrIfDHCPRelayClientPktsRelayed	Counter32
	vRtrIfDHCPRelayServerPktsDiscarded	Counter32
	vRtrIfDHCPRelayServerPktsRelayed	Counter32
	vRtrIfDHCPRelayAuthPktsDiscarded	Counter32
	vRtrIfDHCPRelayAuthPktsSuccess	Counter32
	vRtrIfDHCPRelayClientPktsSnooped	Counter32
	vRtrIfDHCPRelayServerPktsSnooped	Counter32
	vRtrIfDHCPRelayClientPktsProxRad	Counter32
	vRtrIfDHCPRelayClientPktsProxLS	Counter32
	vRtrIfDHCPRelayPktsGenRelease	Counter32
	vRtrIfDHCPRelayPktsGenForceRenew	Counter32

VRtrIfDHCPLeaseStateEntry
SEQUENCE
	vRtrIfDHCPLseStateCiAddr	IpAddress
	vRtrIfDHCPLseStateChAddr	MacAddress
	vRtrIfDHCPLseStateRemainLseTime	Unsigned32
	vRtrIfDHCPLseStateOption82	OCTET STRING
	vRtrIfDHCPLseStatePersistKey	Unsigned32

VRtrIfDHCP6Entry
SEQUENCE
	vRtrIfDHCP6LastChanged	TimeStamp
	vRtrIfDHCP6AdminState	TmnxAdminState
	vRtrIfDHCP6OperState	INTEGER
	vRtrIfDHCP6Description	TItemDescription
	vRtrIfDHCP6RelayServer1	InetAddressIPv6z
	vRtrIfDHCP6RelayServer2	InetAddressIPv6z
	vRtrIfDHCP6RelayServer3	InetAddressIPv6z
	vRtrIfDHCP6RelayServer4	InetAddressIPv6z
	vRtrIfDHCP6RelayServer5	InetAddressIPv6z
	vRtrIfDHCP6RelayServer6	InetAddressIPv6z
	vRtrIfDHCP6RelayServer7	InetAddressIPv6z
	vRtrIfDHCP6RelayServer8	InetAddressIPv6z
	vRtrIfDHCP6RelayItfIdOption	INTEGER
	vRtrIfDHCP6LeasePopulate	Unsigned32
	vRtrIfDHCP6CurrLeasePopulate	Unsigned32
	vRtrIfDHCP6SourceAddress	InetAddressIPv6
	vRtrIfDHCP6EnableNgbrResolution	TruthValue
	vRtrIfDHCP6RemoteIdOption	TruthValue
	vRtrIfDHCP6PfxdAdminState	INTEGER
	vRtrIfDHCP6ServerMaxLeaseStates	Unsigned32
	vRtrIfDHCP6CurrServerLeaseStates	Unsigned32
	vRtrIfDHCP6ItfIdString	DisplayString

VRtrIfNameEntry
SEQUENCE
	vRtrIfNameIndex	InterfaceIndex

VRtrIpAddrEntry
SEQUENCE
	vRiaIndex	INTEGER
	vRiaRowStatus	RowStatus
	vRiaIpAddress	IpAddress
	vRiaNetMask	IpAddress
	vRiaBcastAddrFormat	INTEGER
	vRiaReasmMaxSize	INTEGER
	vRiaIgpInhibit	TruthValue
	vRiaInetAddressType	InetAddressType
	vRiaInetAddress	InetAddress
	vRiaInetPrefixLen	InetAddressPrefixLength
	vRiaInetAddrState	TmnxInetAddrState
	vRiaInetEui64	TruthValue
	vRiaInetOperAddress	InetAddress
	vRiaInetGwAddressType	InetAddressType
	vRiaInetGwAddress	InetAddress
	vRiaInetRemoteIpType	InetAddressType
	vRiaInetRemoteIp	InetAddress

VRtrIpCidrRouteEntry
SEQUENCE
	vRtrIpCidrRouteLastEnabledTime	TimeStamp
	vRtrIpCidrRoutePreference	Unsigned32
	vRtrIpCidrRouteMetric	Unsigned32

VRtrStaticRouteEntry
SEQUENCE
	vRtrStaticRouteDest	IpAddress
	vRtrStaticRouteMask	IpAddress
	vRtrStaticRouteIndex	INTEGER
	vRtrStaticRouteRowStatus	RowStatus
	vRtrStaticRouteLastEnabledTime	TimeStamp
	vRtrStaticRouteStatus	INTEGER
	vRtrStaticRouteStaticType	INTEGER
	vRtrStaticRoutePreference	Unsigned32
	vRtrStaticRouteMetric	Unsigned32
	vRtrStaticRouteEgressIfIndex	InterfaceIndexOrZero
	vRtrStaticRouteNextHop	IpAddress
	vRtrStaticRouteNextHopUnnumberedIf	DisplayString
	vRtrStaticRouteAdminState	TmnxAdminState
	vRtrStaticRouteIgpShortcut	BITS
	vRtrStaticRouteDisallowIgp	TruthValue
	vRtrStaticRouteTag	Unsigned32

VRtrSvcIpRangeEntry
SEQUENCE
	vRtrSvcIpRangeAddress	IpAddress
	vRtrSvcIpRangeMask	Unsigned32
	vRtrSvcIpRangeRowStatus	RowStatus
	vRtrSvcIpRangeExclusive	TruthValue

VRtrIpNetToMediaEntry
SEQUENCE
	vRtrIpNetToMediaTimer	Unsigned32
	vRtrIpNetToMediaOperState	TmnxOperState

VRtrInstanceAggregationEntry
SEQUENCE
	vRtrAggregationIpPrefix	IpAddress
	vRtrAggregationIpPrefixMask	IpAddressPrefixLength
	vRtrAggregationRowStatus	RowStatus
	vRtrAggregationLastChanged	TimeStamp
	vRtrAggregationSummaryOnly	TruthValue
	vRtrAggregationASSet	TruthValue
	vRtrAggregationAggregatorAS	TmnxBgpAutonomousSystem
	vRtrAggregationAggregatorIPAddr	IpAddress
	vRtrAggregationOperState	TmnxOperState

VRtrStaticRouteIndexEntry
SEQUENCE
	vRtrStaticRouteIndexDest	IpAddress
	vRtrStaticRouteIndexMask	IpAddress
	vRtrStaticRouteAvailableIndex	TestAndIncr

VRtrTunnelEntry
SEQUENCE
	vRtrTunnelDest	IpAddress
	vRtrTunnelMask	IpAddress
	vRtrTunnelPreference	Unsigned32
	vRtrTunnelType	TmnxTunnelType
	vRtrTunnelID	TmnxTunnelID
	vRtrTunnelNexthop	IpAddress
	vRtrTunnelMetric	Unsigned32
	vRtrTunnelAge	Integer32

VRtrAdvPrefixEntry
SEQUENCE
	vRtrAdvPrefixIfIndex	InterfaceIndex
	vRtrAdvPrefixPrefix	InetAddress
	vRtrAdvPrefixLength	InetAddressPrefixLength
	vRtrAdvPrefixRowStatus	RowStatus
	vRtrAdvPrefixOnLinkFlag	TruthValue
	vRtrAdvPrefixAutonomousFlag	TruthValue
	vRtrAdvPrefixPreferredLifetime	Unsigned32
	vRtrAdvPrefixValidLifetime	Unsigned32

VRtrInetStaticRouteEntry
SEQUENCE
	vRtrInetStaticRouteDestType	InetAddressType
	vRtrInetStaticRouteDest	InetAddress
	vRtrInetStaticRouteDestPfxLen	InetAddressPrefixLength
	vRtrInetStaticRouteIndex	INTEGER
	vRtrInetStaticRouteRowStatus	RowStatus
	vRtrInetStaticRouteLastEnabledTime	TimeStamp
	vRtrInetStaticRouteStatus	INTEGER
	vRtrInetStaticRouteStaticType	INTEGER
	vRtrInetStaticRoutePreference	Unsigned32
	vRtrInetStaticRouteMetric	Unsigned32
	vRtrInetStaticRouteEgressIfIndex	InterfaceIndexOrZero
	vRtrInetStaticRouteNextHopType	InetAddressType
	vRtrInetStaticRouteNextHop	InetAddress
	vRtrInetStaticRouteNextHopIf	DisplayString
	vRtrInetStaticRouteAdminState	TmnxAdminState
	vRtrInetStaticRouteIgpShortcut	BITS
	vRtrInetStaticRouteDisallowIgp	TruthValue
	vRtrInetStaticRouteTag	Unsigned32
	vRtrInetStaticRouteEnableBfd	TruthValue
	vRtrInetStaticRouteCpeAddrType	InetAddressType
	vRtrInetStaticRouteCpeAddr	InetAddress
	vRtrInetStaticRouteCpeInterval	Unsigned32
	vRtrInetStaticRouteCpeDropCnt	Unsigned32
	vRtrInetStaticRouteCpeEnableLog	TruthValue

VRtrInetStaticRouteIndexEntry
SEQUENCE
	vRtrInetStaticRouteAvailIndex	TestAndIncr

VRtrInetInstAggrEntry
SEQUENCE
	vRtrInetAggrIpPrefixType	InetAddressType
	vRtrInetAggrIpPrefix	InetAddress
	vRtrInetAggrIpPrefixLen	InetAddressPrefixLength
	vRtrInetAggrRowStatus	RowStatus
	vRtrInetAggrLastChanged	TimeStamp
	vRtrInetAggrSummaryOnly	TruthValue
	vRtrInetAggrASSet	TruthValue
	vRtrInetAggrAggregatorAS	TmnxBgpAutonomousSystem
	vRtrInetAggrAggregatorIPAddr	IpAddress
	vRtrInetAggrOperState	TmnxOperState

VRtrInetSvcIpRangeEntry
SEQUENCE
	vRtrInetSvcIpRangeAddrType	InetAddressType
	vRtrInetSvcIpRangeAddr	InetAddress
	vRtrInetSvcIpRangePfxLen	InetAddressPrefixLength
	vRtrInetSvcIpRangeRowStatus	RowStatus
	vRtrInetSvcIpRangeExclusive	TruthValue

VRtrIfGlobalIndexEntry
SEQUENCE
	vRtrIfGlobalIndexvRtrID	TmnxVRtrID
	vRtrIfGlobalIndexvRtrIfIndex	InterfaceIndex

VRtrIfProxyNDEntry
SEQUENCE
	vRtrIfProxyNDLocal	TruthValue
	vRtrIfProxyNDPolicy1	TPolicyStatementNameOrEmpty
	vRtrIfProxyNDPolicy2	TPolicyStatementNameOrEmpty
	vRtrIfProxyNDPolicy3	TPolicyStatementNameOrEmpty
	vRtrIfProxyNDPolicy4	TPolicyStatementNameOrEmpty
	vRtrIfProxyNDPolicy5	TPolicyStatementNameOrEmpty

VRtrIfDHCP6PfxDelegationEntry
SEQUENCE
	vRtrIfDHCP6PfxdPrefix	InetAddressIPv6
	vRtrIfDHCP6PfxdPrefixLen	InetAddressPrefixLength
	vRtrIfDHCP6PfxdRowStatus	RowStatus
	vRtrIfDHCP6PfxdLastChanged	TimeStamp
	vRtrIfDHCP6PfxdDUID	OCTET STRING
	vRtrIfDHCP6PfxdIAID	Unsigned32
	vRtrIfDHCP6PfxdPrefLifetime	Unsigned32
	vRtrIfDHCP6PfxdValidLifetime	Unsigned32

VRtrDHCP6DropStatEntry
SEQUENCE
	vRtrDHCP6DropStatReason	INTEGER
	vRtrDHCP6DropStatLastCleared	TimeStamp
	vRtrDHCP6DropStatPktsDropped	Gauge32

VRtrDHCP6MsgStatEntry
SEQUENCE
	vRtrDHCP6MsgStatsMsgType	TmnxDHCP6MsgType
	vRtrDHCP6MsgStatsLstClrd	TimeStamp
	vRtrDHCP6MsgStatsRcvd	Gauge32
	vRtrDHCP6MsgStatsSent	Gauge32
	vRtrDHCP6MsgStatsDropped	Gauge32

VRtrIfIpcpEntry
SEQUENCE
	vRtrIfIpcpPeerAddrType	InetAddressType
	vRtrIfIpcpPeerAddr	InetAddress
	vRtrIfIpcpPriDnsAddrType	InetAddressType
	vRtrIfIpcpPriDnsAddr	InetAddress
	vRtrIfIpcpSecDnsAddrType	InetAddressType
	vRtrIfIpcpSecDnsAddr	InetAddress

VRtrInetStatRteCpeChkStatsEntry
SEQUENCE
	vRtrInetStatRteCpeChkUpTime	TimeTicks
	vRtrInetStatRteCpeChkInPktCnt	Counter32
	vRtrInetStatRteCpeChkOutPktCnt	Counter32
	vRtrInetStatRteCpeChkDownTrans	Gauge32
	vRtrInetStatRteCpeChkUpTrans	Gauge32
	vRtrInetStatRteCpeChkTTL	Unsigned32

TmnxDscpAppEntry
SEQUENCE
	tmnxDscpAppId	TDSCPAppId
	tmnxDscpAppLastChanged	TimeStamp
	tmnxDscpAppDscpValue	TDSCPValueOrNone

TmnxDscpFCEntry
SEQUENCE
	tmnxDscpFCDscpValue	TDSCPValue
	tmnxDscpFCLastChanged	TimeStamp
	tmnxDscpFCValue	TFCType

TmnxDot1pAppEntry
SEQUENCE
	tmnxDot1pAppId	TDot1pAppId
	tmnxDot1pAppLastChanged	TimeStamp
	tmnxDot1pAppValue	Dot1PPriority

Defined Values

timetraVRtrMIBModule		1.3.6.1.4.1.6527.1.1.3.3
This document is the SNMP MIB module to manage and provision the Alcatel 7x50 device transport and virtual routers, their interfaces, and other related features. Copyright 2003-2008 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel's proprietary intellectual property. Alcatel retains all title and ownership in the Specification, including any revisions. Alcatel grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied `as is', and Alcatel makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
MODULE-IDENTITY

tmnxVRtrObjs		1.3.6.1.4.1.6527.3.1.2.3
OBJECT IDENTIFIER

tmnxVRtrConformance		1.3.6.1.4.1.6527.3.1.1.3
OBJECT IDENTIFIER

tmnxVRtrNotifyPrefix		1.3.6.1.4.1.6527.3.1.3.3
OBJECT IDENTIFIER

tmnxVRtrNotifications		1.3.6.1.4.1.6527.3.1.3.3.0
OBJECT IDENTIFIER

tmnxVRtrGlobalObjs		1.3.6.1.4.1.6527.3.1.2.3.15
OBJECT IDENTIFIER

vRtrNextVRtrID		1.3.6.1.4.1.6527.3.1.2.3.15.1
The vRtrNextVRtrID object is used to assign values to vRtrID to be used to create a new row in the vRtrConfTable as described in 'Textual Conventions for SNMPv2'. The network manager reads the object, and then writes the value back in the SET request that creates a new instance of vRtrConfEntry. If the SET fails with the code 'inconsistentValue', then the process must be repeated. If the the SET succeeds, then the object is incremented and the new instance is created according to the manager's directions.
Status: current	Access: read-create
OBJECT-TYPE
	TestAndIncr

vRtrConfiguredVRtrs		1.3.6.1.4.1.6527.3.1.2.3.15.2
The value of vRtrConfiguredVRtrs indicates the current number of virtual routers configured in the system and represented as rows in the vRtrConfTable.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrActiveVRtrs		1.3.6.1.4.1.6527.3.1.2.3.15.3
The value of vRtrActiveVRtrs indicates the current number of virtual routers in the system with vRtrAdminStatus equal 'inService'.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrRouteThresholdSoakTime		1.3.6.1.4.1.6527.3.1.2.3.15.4
Following the generation of a tmnxVRtrHighRouteTCA notification, the value of vRtrRouteThresholdSoakTime indicates the soak interval in seconds before another tmnxVRtrHighRouteTCA notification will be re-issued. Imposing this soak period prevents continuous generation of notifications by the agent in the event that routes are continually added to a VRF after it has reached its maximum capacity. When this object has a value of 0, it indicates that the agent should issue a single notification at the time that the value of vRtrHighRouteThreshold is exceeded and another notification should not be sent until the number of routes has fallen below the value configured in vRtrMidRouteThreshold.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

vRtrMaxARPEntries		1.3.6.1.4.1.6527.3.1.2.3.15.5
vRtrMaxARPEntries indicates the maximum number of active and inactive ARP entries supported across all virtual routers in the system.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrIPv6RouteThresholdSoakTime		1.3.6.1.4.1.6527.3.1.2.3.15.6
The value of object vRtrIPv6RouteThresholdSoakTime specifies the soak interval in seconds before another tmnxVRtrIPv6HighRouteTCA notification will be re-issued, after the generation of a tmnxVRtrIPv6HighRouteTCA notification. Imposing this soak period prevents continuous generation of notifications by the agent, in the event that routes are continually added to a VRF after it has reached its maximum capacity. When this object has a value of 0, it indicates that the agent should issue a single notification at the time that the value of vRtrIPv6HighRouteThreshold is exceeded and another notification should not be sent until the number of routes has fallen below the value configured in vRtrIPv6MidRouteThreshold.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

vRtrConfTable		1.3.6.1.4.1.6527.3.1.2.3.1
The vRtrConfTable has an entry for each virtual router configured in the system.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrConfEntry

vRtrConfEntry		1.3.6.1.4.1.6527.3.1.2.3.1.1
Each row entry represents a virtual router in the system. Entries can be created and deleted via SNMP SET operations. Creation requires a SET request containing vRtrRowStatus, vRtrName and vRtrType. Note that rows in this table are usually created by the agent itself as a side affect of some other configuration; for example, when a service vprn is created by setting the appropriate objects in the ALCATEL-IND1-TIMETRA-SERV-MIB. There will always be at least two row entries in this table, one of these entries represents the base or transport router and the other represents the management router. These entries are created when the system is initialized and can never be deleted.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrConfEntry

vRtrID		1.3.6.1.4.1.6527.3.1.2.3.1.1.1
The unique value which identifies this virtual router in the Tmnx system. The vRtrID value for each virtual router must remain constant at least from one re-initialization of the system management processor (CPM) to the next. There will always be at least one router entry defined by the agent with vRtrID=1 which represents the transport router.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	TmnxVRtrID

vRtrRowStatus		1.3.6.1.4.1.6527.3.1.2.3.1.1.2
The row status. The creation or deletion of a virtual router entry causes creation or deletion of corresponding entries in other Tmnx MIB tables with the same vRtrID value. Note that it is not allowed to 'destroy' the row entry for vRtrID = 1. In order for row creation to succeed, values for vRtrName and vRtrType must be included in the same SNMP SET PDU as vRtrRowStatus.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

vRtrAdminState		1.3.6.1.4.1.6527.3.1.2.3.1.1.3
The desired administrative state for this virtual router. Note that it is not allowed to set vRtrAdminState to 'outOfService for the row entry with vRtrID = 1.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxAdminState

vRtrName		1.3.6.1.4.1.6527.3.1.2.3.1.1.4
The administritive name for this virtual router. The router name must be unique among all virtual routers in the system. When a row is created in the vRtrConfTable for a service vprn, the agent assigns the name 'VR-'. Note that for row creation to succeed, a value must be specified for vRtrName.
Status: current	Access: read-create
OBJECT-TYPE
	TNamedItemOrEmpty

vRtrMaxNumRoutes		1.3.6.1.4.1.6527.3.1.2.3.1.1.5
The maximum number of routes that can be configured on this virtual router. If the value is -1, then there is no limit.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	-1..7FFFFFFF

vRtrBgpStatus		1.3.6.1.4.1.6527.3.1.2.3.1.1.6
The desired state for BGP on this virtual router. An attempt to set vRtrBgpStatus to 'delete' will fail if the BGP protocol is not in the administrative outOfService state.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxStatus

vRtrMplsStatus		1.3.6.1.4.1.6527.3.1.2.3.1.1.7
The desired state for MPLS on this virtual router. An attempt to set vRtrMplsStatus to 'delete' will fail if the MPLS protocol is not in the administrative outOfService state, i.e. ALCATEL-IND1-TIMETRA-MPLS-MIB::vRtrMplsGeneralAdminState must be set to 'outOfService'.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxStatus

vRtrOspfStatus		1.3.6.1.4.1.6527.3.1.2.3.1.1.8
The desired state for OSPFv2 on this virtual router. An attempt to set vRtrOspfStatus to 'delete' will fail if the OSPFv2 protocol is not in the administrative outOfService state, i.e. TIMETRA-OSPF-NG-MIB::tmnxOspfAdminState must be set to 'disabled'. This object was obsoleted in release 5.0.
Status: obsolete	Access: read-create
OBJECT-TYPE
	TmnxStatus

vRtrRipStatus		1.3.6.1.4.1.6527.3.1.2.3.1.1.9
The desired state for RIP on this virtual router. An attempt to set vRtrRipStatus to 'delete' will fail if the RIP protocol is not in the admininistrative outOfService state.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxStatus

vRtrRsvpStatus		1.3.6.1.4.1.6527.3.1.2.3.1.1.10
The desired state for RSVP on this virtual router. An attempt to set vRtrRsvpStatus to 'delete' will fail if the RSVP protocol is not in the administrative outOfService state, i.e. TIMETRA-RSVP-MIB::vRtrRsvpGeneralAdminState must be set to 'outOfService'.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxStatus

vRtrEcmpMaxRoutes		1.3.6.1.4.1.6527.3.1.2.3.1.1.11
The value of vRtrEcmpMaxRoutes specifies the maximum number of equal cost routes allowed on this routing table instance. When the number ecmp routes available at the best preference value exceed the number of vRtrEcmpMaxRoutes allowed, then the lowest next-hop IP address algorithm is used to select the ecmp routes used. When vRtrEcmpMaxRoutes is set to zero (0), and multiple routes are available with the same best preference value and equal cost values, then the route with the lowest next-hop IP address is used.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..16

vRtrAS		1.3.6.1.4.1.6527.3.1.2.3.1.1.12
The value of vRtrAS specifies the autonomous system number to be advertised to this peer. This object is MUST be set before BGP can be activated.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxBgpAutonomousSystem

vRtrNewIfIndex		1.3.6.1.4.1.6527.3.1.2.3.1.1.13
This object is used to assign values to vRtrIfIndex as described in 'Textual Conventions for SNMPv2'. The network manager reads the object, and then writes the value back in the SET request that creates a new instance of vRtrIfEntry. If the SET fails with the code 'inconsistentValue', then the process must be repeated. If the the SET succeeds, then the object is incremented and the new instance is created according to the manager's directions.
Status: current	Access: read-create
OBJECT-TYPE
	TestAndIncr

vRtrLdpStatus		1.3.6.1.4.1.6527.3.1.2.3.1.1.14
The desired state for LDP on this virtual router. An attempt to set vRtrLdpStatus to 'delete' will fail if the LDP protocol is not in the administrative outOfService state, i.e. ALCATEL-IND1-TIMETRA-LDP-MIB::vRtrLdpGenAdminState must be set to 'outOfService'.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxStatus

vRtrIsIsStatus		1.3.6.1.4.1.6527.3.1.2.3.1.1.15
The desired state for ISIS on this virtual router. An attempt to set vRtrIsIsStatus to 'delete' will fail if the ISIS protocol is not in the administrative outOfService state.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxStatus

vRtrRouterId		1.3.6.1.4.1.6527.3.1.2.3.1.1.16
A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

vRtrTriggeredPolicy		1.3.6.1.4.1.6527.3.1.2.3.1.1.17
If the value of vRtrTriggeredPolicy is 'false', all routing protocols automatically reevaluate their routes when the route policies are changed. If this value is 'true', then the user must trigger the recalculation of routes when the route policies are changed.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrConfederationAS		1.3.6.1.4.1.6527.3.1.2.3.1.1.18
The value of vRtrConfederationAS specifies the confederation AS number for the virtual router. A value of 0 means no confederation AS.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxBgpAutonomousSystem

vRtrRouteDistinguisher		1.3.6.1.4.1.6527.3.1.2.3.1.1.19
The value of vRtrRouteDistinguisher is an identifier attached to routes that distinguishes to which VPN it belongs. The VPRN cannot be operationally 'inService' until a route distinguisher has been assigned.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxVPNRouteDistinguisher

vRtrMidRouteThreshold		1.3.6.1.4.1.6527.3.1.2.3.1.1.20
The value of vRtrMidRouteThreshold specifies the mid-level water marker for the number of routes which this VRF may hold. When this limit is exceeded a tmnxVRtrMidRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..100

vRtrHighRouteThreshold		1.3.6.1.4.1.6527.3.1.2.3.1.1.21
The value of vRtrHighRouteThreshold specifies the high-level water marker for the number of routes which this VRF may hold. When this limit is exceeded a tmnxVRtrHighRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..100

vRtrIllegalLabelThreshold		1.3.6.1.4.1.6527.3.1.2.3.1.1.22
The value of vRtrIllegalLabelThreshold specifies the allowed limit for illegal label violations on this VRF. When this limit is exceeded a tmnxVRtrIllegalLabelTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

vRtrVpnId		1.3.6.1.4.1.6527.3.1.2.3.1.1.23
The value of vRtrVpnId is the Virtual Private Network Identifier of this virtual router.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxVPNId

vRtrDescription		1.3.6.1.4.1.6527.3.1.2.3.1.1.25
The value of vRtrDescription is a user provided description string for this virtual router. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
Status: current	Access: read-create
OBJECT-TYPE
	TItemDescription

vRtrGracefulRestart		1.3.6.1.4.1.6527.3.1.2.3.1.1.26
The value of vRtrGracefulRestart indicates whether or not graceful restart capabilities are enabled on this virtual router. In order for any protocol to perform graceful restart vRtrGracefulRestart must have a value of 'true'. Graceful restart capabilities can then be enabled or disabled on an individual protocol basis.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrGracefulRestartType		1.3.6.1.4.1.6527.3.1.2.3.1.1.27
The value of vRtrGracefulRestartType specifies when to include grace restart of routing protocols as a result of a switchover from primary CPM in a redundant system. 'never' - always switch without graceful restart 'manual' - perform graceful restart only on a forced switchover 'automatic' - perform graceful restart on either a switchover caused by an error or a forced switchover
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	never(0), manual(1), automatic(2)

vRtrType		1.3.6.1.4.1.6527.3.1.2.3.1.1.28
The value of vRtrType specifies the type of virtual router represented by this row entry. When a row is created in this table using 'createAndGo', vRtrType must be specified or the row creation will fail. Only the value of 'vr (3)' can be set with a SNMP SET request. The other values are used for row entries created internally by the agent. The value of vRtrType cannot be modified if vRtrRowStatus has a value of 'active'.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	unknown(0), baseRouter(1), vprn(2), vr(3)

vRtrServiceId		1.3.6.1.4.1.6527.3.1.2.3.1.1.29
When vRtrType has a value of 'vprn', the value of vRtrServiceId indicates the service-id of the associated service that created this row entry.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxServId

vRtrCustId		1.3.6.1.4.1.6527.3.1.2.3.1.1.30
When vRtrType has a value of 'vprn', the value of vRtrCustId indicates the customer-id of the associated service that created this row entry.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxCustId

vRtrIgmpStatus		1.3.6.1.4.1.6527.3.1.2.3.1.1.31
The desired state for IGMP on this virtual router. An attempt to set vRtrIgmpStatus to 'delete' will fail if the IGMP protocol is not in the administrative outOfService state, i.e. TIMETRA-IGMP-MIB::vRtrIgmpGenAdminState must be set to 'outOfService'.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxStatus

vRtrMaxNumRoutesLogOnly		1.3.6.1.4.1.6527.3.1.2.3.1.1.32
The value of vRtrMaxNumRoutesLogOnly specifies the action to be taken when the maximum number of routes that can be held within a given VRF context is reached. If the value is 'true' the event is logged (a trap is sent) and the learning of new routes is not disabled. If the value is 'false' the event is logged and the learning of new routes is disabled.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrVrfTarget		1.3.6.1.4.1.6527.3.1.2.3.1.1.33
The value of vRtrVrfTarget specifies the extended community name for the default vrf-import or vrf-export policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if either vRtrVrfExportTarget or vRtrVrfImportTarget has been set.
Status: current	Access: read-create
OBJECT-TYPE
	TNamedItemOrEmpty

vRtrVrfExportTarget		1.3.6.1.4.1.6527.3.1.2.3.1.1.34
The value of vRtrVrfExportTarget specifies the extended community name for the default vrf-export policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if vRtrVrfTarget has been set.
Status: current	Access: read-create
OBJECT-TYPE
	TNamedItemOrEmpty

vRtrVrfImportTarget		1.3.6.1.4.1.6527.3.1.2.3.1.1.35
The value of vRtrVrfImportTarget specifies the extended community name for the default vrf-import policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if vRtrVrfTarget has been set.
Status: current	Access: read-create
OBJECT-TYPE
	TNamedItemOrEmpty

vRtrPimStatus		1.3.6.1.4.1.6527.3.1.2.3.1.1.36
The desired state for PIM on this virtual router. When the object is set to 'create', PIM protocol instance is enabled on the virtual router. Setting the value to 'delete' disables PIM on the virtual router.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxStatus

vRtrMaxMcastNumRoutes		1.3.6.1.4.1.6527.3.1.2.3.1.1.37
The maximum number of multicast routes that can be configured on this virtual router. If the value is -1, then there is no limit.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	-1..7FFFFFFF

vRtrMaxMcastNumRoutesLogOnly		1.3.6.1.4.1.6527.3.1.2.3.1.1.38
The value of vRtrMaxMcastNumRoutesLogOnly specifies the action to be taken when the maximum number of multicast routes that can be held within a given VRF context is reached. If the value is 'true' the event is logged (a trap is sent) and the learning of new multicast routes is not disabled. If the value is 'false' the event is logged and the learning of new routes is disabled.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMcastMidRouteThreshold		1.3.6.1.4.1.6527.3.1.2.3.1.1.39
The value of vRtrMcastMidRouteThreshold specifies the mid-level water marker for the number of multicast routes which this VRF may hold. When this limit is exceeded a tmnxVRtrMcastMidRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..100

vRtrIgnoreIcmpRedirect		1.3.6.1.4.1.6527.3.1.2.3.1.1.40
If the value of vRtrIgnoreIcmpRedirect is 'true', the virtual router will drop all ICMP Redirects received on the management interface. If the value of vRtrIgnoreIcmpRedirect is 'false' and an ICMP Redirect is received on the management interface, a /32 route will be created in the route table. If the value of vRtrName is not 'management', an SNMP set request to vRtrIgnoreIcmpRedirect will fail with an 'inconsistentValue' error.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrOspfv3Status		1.3.6.1.4.1.6527.3.1.2.3.1.1.41
The desired state for OSPFv3 on this virtual router. An attempt to set vRtrOspfv3Status to 'delete' will fail if the OSPFv3 protocol is not in the administrative outOfService state, i.e. TIMETRA-OSPF-NG-MIB::tmnxOspfAdminState must be set to 'disabled'. This object was obsoleted in release 5.0.
Status: obsolete	Access: read-create
OBJECT-TYPE
	TmnxStatus

vRtrMsdpStatus		1.3.6.1.4.1.6527.3.1.2.3.1.1.42
The desired state for Msdp on this virtual router. An attempt to set vRtrMsdpStatus to 'delete' will fail if the Msdp protocol is not in the administrative outOfService state, i.e. TIMETRA-MSDP-MIB::tmnxMsdpAdminState must be set to 'outOfService'.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxStatus

vRtrVprnType		1.3.6.1.4.1.6527.3.1.2.3.1.1.43
The value of vRtrVprnType specifies how traffic is routed. regular (1) - All traffic is routed to all destinations. hub (2) - Network traffic is routed only to the access side. Access traffic is routed to all destinations. spoke (3) - Networks traffic is routed to all destinations. Access traffic is routed only to the network side. subscriberSplitHorizon (4) - Subscriber-interface traffic is routed only to the network side. All other traffic is routed to all destinations. This object cannot be modified if vRtrType is not 'vprn'.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	regular(1), hub(2), spoke(3), subscriberSplitHorizon(4)

vRtrSecondaryVrfId		1.3.6.1.4.1.6527.3.1.2.3.1.1.44
The unique value of vRtrSecondaryVrfId specifies the secondary vrf-id for hub and spoke vprn. Non-zero value of vRtrSecondaryVrfId indicates that two route-tables exist for hub and spoke vprn system one each for hub and spoke. One of which is indexed by vRtrSecondaryVrfId. If the value of vRtrSecondaryVrfId is zero, it indicates that there is only one route-table for hub and spoke vprn system.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxVRtrIDOrZero

vRtrMldStatus		1.3.6.1.4.1.6527.3.1.2.3.1.1.45
The desired state for Multicast Listener Discovery (MLD) Protocol on this virtual router. An attempt to set vRtrMldStatus to 'delete' will fail if the MLD protocol is not in the administrative outOfService state, i.e. TIMETRA-MLD-MIB::vRtrMldGenAdminState must be set to 'outOfService'.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxStatus

vRtrIPv6MaxNumRoutes		1.3.6.1.4.1.6527.3.1.2.3.1.1.46
The maximum number of IPv6 routes that can be configured on this virtual router. If the value is -1, then there is no limit. This object is not supported on SR-1, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5'.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	-1..7FFFFFFF

vRtrIPv6MidRouteThreshold		1.3.6.1.4.1.6527.3.1.2.3.1.1.47
The value of vRtrIPv6MidRouteThreshold specifies the mid-level water marker for the number of IPv6 routes which this VRF may hold. When this limit is exceeded a tmnxVRtrIPv6MidRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..100

vRtrIPv6HighRouteThreshold		1.3.6.1.4.1.6527.3.1.2.3.1.1.48
The value of vRtrIPv6HighRouteThreshold specifies the high-level water marker for the number of IPv6 routes which this VRF may hold. When this limit is exceeded a tmnxVRtrIPv6HighRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..100

vRtrIPv6MaxNumRoutesLogOnly		1.3.6.1.4.1.6527.3.1.2.3.1.1.49
The value of vRtrIPv6MaxNumRoutesLogOnly specifies the action to be taken when the maximum number of IPv6 routes that can be held within a given VRF context is reached. If the value is 'true' the event is logged (a trap is sent) and the learning of new routes is not disabled. If the value is 'false' the event is logged and the learning of new routes is disabled.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrIPv6IgnoreIcmpRedirect		1.3.6.1.4.1.6527.3.1.2.3.1.1.50
If the value of vRtrIPv6IgnoreIcmpRedirect is 'true', the virtual router will drop all IPv6 ICMP Redirects received on the management interface. If the value of vRtrIPv6IgnoreIcmpRedirect is 'false' and an IPv6 ICMP Redirect is received on the management interface, a /128 route will be created in the route table. If the value of vRtrName is not 'management', an SNMP set request to vRtrIPv6IgnoreIcmpRedirect will fail with an 'inconsistentValue' error.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrMcPathMgmtPlcyName		1.3.6.1.4.1.6527.3.1.2.3.1.1.51
The value of vRtrMcPathMgmtPlcyName specifies the multicast policy name configured on this virtual router.
Status: current	Access: read-create
OBJECT-TYPE
	TNamedItem

vRtrPolicyTable		1.3.6.1.4.1.6527.3.1.2.3.16
The vRtrPolicyTable has an entry for each virtual router configured in the system.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrPolicyEntry

vRtrPolicyEntry		1.3.6.1.4.1.6527.3.1.2.3.16.1
Each row entry represents a collection of statistics for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrPolicyEntry

vRtrImportPolicy1		1.3.6.1.4.1.6527.3.1.2.3.16.1.1
The value of vRtrImportPolicy1 is the name of the first policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current	Access: read-create
OBJECT-TYPE
	TPolicyStatementNameOrEmpty

vRtrImportPolicy2		1.3.6.1.4.1.6527.3.1.2.3.16.1.2
The value of vRtrImportPolicy2 is the name of the second policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current	Access: read-create
OBJECT-TYPE
	TPolicyStatementNameOrEmpty

vRtrImportPolicy3		1.3.6.1.4.1.6527.3.1.2.3.16.1.3
The value of vRtrImportPolicy3 is the name of the third policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current	Access: read-create
OBJECT-TYPE
	TPolicyStatementNameOrEmpty

vRtrImportPolicy4		1.3.6.1.4.1.6527.3.1.2.3.16.1.4
The value of vRtrImportPolicy4 is the name of the fourth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current	Access: read-create
OBJECT-TYPE
	TPolicyStatementNameOrEmpty

vRtrImportPolicy5		1.3.6.1.4.1.6527.3.1.2.3.16.1.5
The value of vRtrImportPolicy5 is the name of the fifth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current	Access: read-create
OBJECT-TYPE
	TPolicyStatementNameOrEmpty

vRtrExportPolicy1		1.3.6.1.4.1.6527.3.1.2.3.16.1.6
The value of vRtrExportPolicy1 is the name of the first policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current	Access: read-create
OBJECT-TYPE
	TPolicyStatementNameOrEmpty

vRtrExportPolicy2		1.3.6.1.4.1.6527.3.1.2.3.16.1.7
The value of vRtrExportPolicy2 is the name of the second policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current	Access: read-create
OBJECT-TYPE
	TPolicyStatementNameOrEmpty

vRtrExportPolicy3		1.3.6.1.4.1.6527.3.1.2.3.16.1.8
The value of vRtrExportPolicy3 is the name of the third policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current	Access: read-create
OBJECT-TYPE
	TPolicyStatementNameOrEmpty

vRtrExportPolicy4		1.3.6.1.4.1.6527.3.1.2.3.16.1.9
The value of vRtrExportPolicy4 is the name of the fourth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current	Access: read-create
OBJECT-TYPE
	TPolicyStatementNameOrEmpty

vRtrExportPolicy5		1.3.6.1.4.1.6527.3.1.2.3.16.1.10
The value of vRtrExportPolicy4 is the name of the fifth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current	Access: read-create
OBJECT-TYPE
	TPolicyStatementNameOrEmpty

vRtrStatTable		1.3.6.1.4.1.6527.3.1.2.3.2
The vRtrStatTable has an entry for each virtual router configured in the system.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrStatEntry

vRtrStatEntry		1.3.6.1.4.1.6527.3.1.2.3.2.1
Each row entry represents a collection of statistics for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrStatEntry

vRtrOperState		1.3.6.1.4.1.6527.3.1.2.3.2.1.1
vRtrOperState indicates current operational status of this virtual router.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxOperState

vRtrDirectRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.2
vRtrDirectRoutes indicates the current number of direct routes for this instance of the route table.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrDirectActiveRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.3
vRtrDirectActiveRoutes indicates the current number of active direct routes for this instance of the route table.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrStaticRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.4
vRtrStaticRoutes indicates the current number of static routes for this instance of the route table.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrStaticActiveRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.5
vRtrStaticActiveRoutes indicates the current number of active static routes for this instance of the route table.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrOSPFRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.6
vRtrOSPFRoutes indicates the current number of ospf routes for this instance of the route table.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrOSPFActiveRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.7
vRtrOSPFActiveRoutes indicates the current number of active ospf routes for this instance of the route table.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrBGPRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.8
vRtrBGPRoutes indicates the current number of bgp routes for this instance of the route table.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrBGPActiveRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.9
vRtrBGPActiveRoutes indicates the current number of active bgp routes for this instance of the route table.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrISISRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.10
vRtrISISRoutes indicates the current number of isis routes for this instance of the route table.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrISISActiveRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.11
vRtrISISActiveRoutes indicates the current number of active isis routes for this instance of the route table.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrRIPRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.12
vRtrRIPRoutes indicates the current number of rip routes for this instance of the route table.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrRIPActiveRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.13
vRtrRIPActiveRoutes indicates the current number of active rip routes for this instance of the route table.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrAggregateRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.14
vRtrAggregateRoutes indicates the current number of aggregate routes for this instance of the route table.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrAggregateActiveRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.15
vRtrAggregateActiveRoutes indicates the current number of active aggregate routes for this instance of the route table.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrStatConfiguredIfs		1.3.6.1.4.1.6527.3.1.2.3.2.1.16
vRtrStatConfiguredIfs indicates the current number of router interfaces configured on this virtual router.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrStatActiveIfs		1.3.6.1.4.1.6527.3.1.2.3.2.1.17
vRtrStatActiveIfs indicates the current number of router interfaces with vRtrIfAdminState equal 'inService' on this virtual router.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrStatIllegalLabels		1.3.6.1.4.1.6527.3.1.2.3.2.1.18
vRtrStatIllegalLabels indicates the number of illegally received labels on this virtual router.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrStatCurrNumRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.19
vRtrStatCurrNumRoutes indicates the current number of routes in the VRF for this virtual router.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrStatBGPVpnRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.20
vRtrStatBGPVpnRoutes indicates the current number of VPN-IPV4 routes learned by MP-BGP for this virtual router.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrStatBGPVpnActiveRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.21
vRtrStatBGPVpnActiveRoutes indicates the current number of active VPN-IPV4 routes learned by MP-BGP for this virtual router.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrStatTotalLdpTunnels		1.3.6.1.4.1.6527.3.1.2.3.2.1.22
vRtrStatTotalLdpTunnels indicates the current number of both active and inactive LDP tunnels.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrStatTotalSdpTunnels		1.3.6.1.4.1.6527.3.1.2.3.2.1.23
vRtrStatTotalSdpTunnels indicates the current number of both active and inactive SDP tunnels.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrStatActiveLdpTunnels		1.3.6.1.4.1.6527.3.1.2.3.2.1.24
vRtrStatActiveLdpTunnels indicates the current number of rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'ldp'.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrStatActiveSdpTunnels		1.3.6.1.4.1.6527.3.1.2.3.2.1.25
vRtrStatActiveSdpTunnels indicates the current number of rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'sdp'.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrMulticastRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.26
vRtrMulticastRoutes indicates the current number of rows in the vRtrPimGrpSrcTable.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrStatActiveARPEntries		1.3.6.1.4.1.6527.3.1.2.3.2.1.27
vRtrStatActiveARPEntries indicates the number of active ARP entries for the specified virtual router in the system.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrStatTotalARPEntries		1.3.6.1.4.1.6527.3.1.2.3.2.1.28
vRtrStatTotalARPEntries indicates the total number of active and inactive ARP entries for the specified virtual router in the system.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrV6DirectRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.29
vRtrV6DirectRoutes indicates the current number of v6 direct routes for this instance of the route table.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrV6DirectActiveRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.30
vRtrV6DirectActiveRoutes indicates the current number of v6 active direct routes for this instance of the route table.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrV6StaticRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.31
vRtrV6StaticRoutes indicates the current number of v6 static routes for this instance of the route table.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrV6StaticActiveRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.32
vRtrV6StaticActiveRoutes indicates the current number of v6 active static routes for this instance of the route table.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrV6OSPFRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.33
vRtrV6OSPFRoutes indicates the current number of v6 ospf routes for this instance of the route table.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrV6OSPFActiveRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.34
vRtrV6OSPFActiveRoutes indicates the current number of v6 active ospf routes for this instance of the route table.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrV6BGPRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.35
vRtrV6BGPRoutes indicates the current number of v6 bgp routes for this instance of the route table.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrV6BGPActiveRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.36
vRtrV6BGPActiveRoutes indicates the current number of v6 active bgp routes for this instance of the route table.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrV6ISISRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.37
vRtrV6ISISRoutes indicates the current number of v6 isis routes for this instance of the route table.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrV6ISISActiveRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.38
vRtrV6ISISActiveRoutes indicates the current number of v6 active isis routes for this instance of the route table.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrV6RIPRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.39
vRtrV6RIPRoutes indicates the current number of v6 rip routes for this instance of the route table.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrV6RIPActiveRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.40
vRtrV6RIPActiveRoutes indicates the current number of active v6 rip routes for this instance of the route table.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrV6AggregateRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.41
vRtrV6AggregateRoutes indicates the current number of v6 aggregate routes for this instance of the route table.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrV6AggregateActiveRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.42
vRtrV6AggregateActiveRoutes indicates the current number of active v6 aggregate routes for this instance of the route table.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrV6StatConfiguredIfs		1.3.6.1.4.1.6527.3.1.2.3.2.1.43
vRtrV6StatConfiguredIfs indicates the current number of v6 router interfaces configured on this virtual router.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrV6StatActiveIfs		1.3.6.1.4.1.6527.3.1.2.3.2.1.44
vRtrV6StatActiveIfs indicates the current number of v6 router interfaces with vRtrIfAdminState equal 'inService' on this virtual router.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrV6StatIllegalLabels		1.3.6.1.4.1.6527.3.1.2.3.2.1.45
vRtrV6StatIllegalLabels indicates the number of illegally received v6 labels on this virtual router.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrV6StatCurrNumRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.46
vRtrV6StatCurrNumRoutes indicates the current number of v6 routes in the VRF for this virtual router.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrV6StatBGPVpnRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.47
vRtrV6StatBGPVpnRoutes indicates the current number of VPN-IPV6 routes learned by MP-BGP for this virtual router.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrV6StatBGPVpnActiveRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.48
vRtrV6StatBGPVpnActiveRoutes indicates the current number of active VPN-IPV6 routes learned by MP-BGP for this virtual router.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrV6StatTotalLdpTunnels		1.3.6.1.4.1.6527.3.1.2.3.2.1.49
vRtrV6StatTotalLdpTunnels indicates the current number of both active and inactive v6 LDP tunnels.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrV6StatTotalSdpTunnels		1.3.6.1.4.1.6527.3.1.2.3.2.1.50
vRtrV6StatTotalSdpTunnels indicates the current number of both active and inactive v6 SDP tunnels.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrV6StatActiveLdpTunnels		1.3.6.1.4.1.6527.3.1.2.3.2.1.51
vRtrV6StatActiveLdpTunnels indicates the current number of v6 rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'ldp'.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrV6StatActiveSdpTunnels		1.3.6.1.4.1.6527.3.1.2.3.2.1.52
vRtrV6StatActiveSdpTunnels indicates the current number of v6 rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'sdp'.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrV6MulticastRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.53
vRtrV6MulticastRoutes indicates the current number of v6 rows in the vRtrPimGrpSrcTable.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrV6StatActiveNbrEntries		1.3.6.1.4.1.6527.3.1.2.3.2.1.54
vRtrV6StatActiveNbrEntries indicates the number of active V6 neighbor discovery entries for the specified virtual router in the system.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrV6StatTotalNbrEntries		1.3.6.1.4.1.6527.3.1.2.3.2.1.55
vRtrV6StatTotalNbrEntries indicates the total number of active and inactive v6 neighbor discovery entries for the specified virtual router in the system.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrSubMgmtRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.56
The value of vRtrSubMgmtRoutes indicates the total number of subscriber management routes in the route Table.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrSubMgmtActiveRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.57
The value of vRtrSubMgmtActiveRoutes indicates the number of active subscriber management routes.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrStatTotalRsvpTunnels		1.3.6.1.4.1.6527.3.1.2.3.2.1.58
The value of vRtrStatTotalRsvpTunnels indicates the current number of both active and inactive RSVP tunnels.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrStatActiveRsvpTunnels		1.3.6.1.4.1.6527.3.1.2.3.2.1.59
The value of vRtrStatActiveRsvpTunnels indicates the current number of rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'rsvp'.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrV6StatTotalRsvpTunnels		1.3.6.1.4.1.6527.3.1.2.3.2.1.60
The value of vRtrV6StatTotalRsvpTunnels indicates the current number of both active and inactive IPv6 RSVP tunnels.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrV6StatActiveRsvpTunnels		1.3.6.1.4.1.6527.3.1.2.3.2.1.61
The value of vRtrV6StatActiveRsvpTunnels indicates the current number of IPv6 rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'rsvp'.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrHostRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.62
The value of vRtrHostRoutes indicates the current number of direct routes with prefix value 32 for this instance of the route table.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrHostActiveRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.63
The value of vRtrHostActiveRoutes indicates the current number of active direct routes with prefix value 32 for this instance of the route table.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrV6HostRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.64
The value of vRtrV6HostRoutes indicates the current number of v6 direct routes with prefix value 128 for this instance of the route table.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrV6HostActiveRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.65
The value of vRtrV6HostActiveRoutes indicates the current number of v6 active direct routes with prefix value 128 for this instance of the route table.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrStatLocalARPEntries		1.3.6.1.4.1.6527.3.1.2.3.2.1.66
The value of vRtrStatLocalARPEntries indicates the total number of active and inactive local ARP entries for the specified virtual router in the system.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrStatStaticARPEntries		1.3.6.1.4.1.6527.3.1.2.3.2.1.67
The value of vRtrStatStaticARPEntries indicates the total number of active and inactive static ARP entries for the specified virtual router in the system.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrStatDynamicARPEntries		1.3.6.1.4.1.6527.3.1.2.3.2.1.68
The value of vRtrStatDynamicARPEntries indicates the total number of active and inactive dynamic ARP entries for the specified virtual router in the system.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrStatManagedARPEntries		1.3.6.1.4.1.6527.3.1.2.3.2.1.69
The value of vRtrStatManagedARPEntries indicates the total number of active and inactive managed ARP entries for the specified virtual router in the system.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrStatInternalARPEntries		1.3.6.1.4.1.6527.3.1.2.3.2.1.70
The value of vRtrStatInternalARPEntries indicates the total number of active and inactive internal ARP entries for the specified virtual router in the system.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrManagedRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.71
The value of vRtrManagedRoutes indicates the total number of active and inactive managed routes for the specified virtual router in the system.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrManagedActiveRoutes		1.3.6.1.4.1.6527.3.1.2.3.2.1.72
The value of vRtrManagedActiveRoutes indicates the total number of active managed routes for the specified virtual router in the system.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrIfTotalNumber		1.3.6.1.4.1.6527.3.1.2.3.3
The number of router interfaces configured in this system.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

vRtrIfTable		1.3.6.1.4.1.6527.3.1.2.3.4
The vRtrIfTable has an entry for each router interface configured in the system.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrIfEntry

vRtrIfEntry		1.3.6.1.4.1.6527.3.1.2.3.4.1
Each row entry represents a virtual router interface in the system. Entries can be created and deleted via SNMP SET operations using the vRtrIfRowStatus variable.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrIfEntry

vRtrIfIndex		1.3.6.1.4.1.6527.3.1.2.3.4.1.1
The unique value which identifies this interface of this virtual router in the Tmnx system. This field provides an identifier for virtual router interfaces similar to the ifIndex values used in the mib-2 interfaces table for physical interfaces. The vRtrIfIndex values can be reused for different virtual routers, but are unique within those entries with the same vRtrID. The vRtrIfIndex value for each virtual interface must remain constant at least from one re-initialization of the system management processor to the next.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	InterfaceIndex

vRtrIfRowStatus		1.3.6.1.4.1.6527.3.1.2.3.4.1.2
The row status. The creation or deletion of a router interface entry causes creation or deletion of corresponding entries in other Tmnx MIB tables with the same vRtrID and vRtrIfIndex values, such as the vRtrIpAddrTable. The router interface is associated to a physical port interface through the vRtrIfPortID and vRtrIfEncapValue variables. The RowStatus cannot be SET to 'active' unless vRtrIfName has been initialized.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

vRtrIfType		1.3.6.1.4.1.6527.3.1.2.3.4.1.3
The value of vRtrIfType specifies the type of this interface. Different virtual router interface types are defined as follows: network - defined on a network port. service - used internally. serviceIes - defined on a SAP or Spoke SDP. serviceRtdVpls - obsoleted. serviceVprn - defined on a SAP or Spoke SDP. serviceIesSubscriber - used internally. serviceIesGroup - defined on a SAP serviceVprnSubscriber - used internally. serviceVprnGroup - defined on a SAP. serviceIesRedundant - defined on a Spoke SDP. serviceVprnRedundant - defined on a Spoke SDP. serviceVpls - defined on an IP endpoint for VPLS. serviceIesCem - defined on a SAP. --not supported serviceVprnCem - defined on a SAP. --not supported serviceVprnIPsec - defined on a SAP. serviceVprnIPMirror - defined on a Mirror.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	network(1), service(2), serviceIes(3), serviceRtdVpls(4), serviceVprn(5), serviceIesSubscriber(6), serviceIesGroup(7), serviceVprnSubscriber(8), serviceVprnGroup(9), serviceIesRedundant(10), serviceVprnRedundant(11), serviceVpls(12), serviceIesCem(13), serviceVprnCem(14), serviceVprnIPsec(15), serviceVprnIPMirror(16)

vRtrIfName		1.3.6.1.4.1.6527.3.1.2.3.4.1.4
The administrative name assigned this router interface. The interface name must be unique among entries with the same vRtrID value. In order for row creation to succeed, a value must also be assigned to vRtrIfName.
Status: current	Access: read-create
OBJECT-TYPE
	TNamedItem

vRtrIfPortID		1.3.6.1.4.1.6527.3.1.2.3.4.1.5
The physical port to which this interface is bound. If vRtrIfPortID is zero (0), then there is no binding between this virtual router interface and a physical port. Once an interface has been bound to a port, several steps are required to change the binding to some other TmnxPortID value. vRtrIfAdminState must be 'outOfService'; vRtrIfPortID must be set to zero (0) to disassociate the interface from the original port binding; finally, set vRtrIfPortID to the value for the new port binding. Setting vRtrIfPortID to 0x20000001 indicates that this interface is the system interface for the device.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxPortID

vRtrIfChannelID		1.3.6.1.4.1.6527.3.1.2.3.4.1.6
When the physical port, vRtrIfPortID, is a SONET port, vRtrIfChannelID is the STSx channel number used by this interface. If vRtrIfPortID is not a SONET port or the interface has not yet been bound to a physical port, vRtrIfChannelID will be zero (0). This object was obsoleted in release 5.0.
Status: obsolete	Access: read-create
OBJECT-TYPE
	Unsigned32	0..64

vRtrIfEncapValue		1.3.6.1.4.1.6527.3.1.2.3.4.1.7
The value of the label used along with vRtrIfPortID to identify a SAP on the specified access port.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxEncapVal

vRtrIfAdminState		1.3.6.1.4.1.6527.3.1.2.3.4.1.8
The desired administrative state for this router interface.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxAdminState

vRtrIfOperState		1.3.6.1.4.1.6527.3.1.2.3.4.1.9
The current operational status of this router interface.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxOperState

vRtrIfAlias		1.3.6.1.4.1.6527.3.1.2.3.4.1.10
An alternative administrative name assigned this router interface.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..32)

vRtrIfPhysicalAddress		1.3.6.1.4.1.6527.3.1.2.3.4.1.11
The interface's address at its protocol sub-layer. For example, for an 802.x interface, this object normally contains a MAC address. The interface's media-specific MIB must define the bit and byte ordering and the format of the value of this object. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
Status: current	Access: read-create
OBJECT-TYPE
	MacAddress

vRtrIfArpTimeout		1.3.6.1.4.1.6527.3.1.2.3.4.1.12
The value of vRtrIfArpTimeout determines how long an ARP entry associated with this interface remains in the ARP cache. When vRtrIfArpTimeout has a value of zero, '0', the entry will never be cleared from the cache.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..65535

vRtrIfIcmpMaskReply		1.3.6.1.4.1.6527.3.1.2.3.4.1.13
When vRtrIfIcmpMaskReply is set to 'true', a reply will be issued when this node is requested for the network mask for this subnet. The requesting node must be attached to the local network. When vRtrIfIcmpMaskReply is set to 'false', no reply is issued if an ICMP mask request is received.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrIfIcmpRedirects		1.3.6.1.4.1.6527.3.1.2.3.4.1.14
When vRtrIfIcmpRedirects is set to 'true', ICMP redirects are generated when routes are not optimal on this router and another router on the same subnetwork has a better route in order to alert that node that a better route is available. When vRtrIfIcmpRedirects is set to 'false', ICMP redirects are not generated.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrIfIcmpNumRedirects		1.3.6.1.4.1.6527.3.1.2.3.4.1.15
The value of vRtrIfIcmpNumRedirects limits the number of redirects issued per the time frame specified in vRtrIfIcmpRedirectsTime.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	10..1000

vRtrIfIcmpRedirectsTime		1.3.6.1.4.1.6527.3.1.2.3.4.1.16
The value of vRtrIfIcmpRedirectsTime determines the time frame in seconds that is used to limit the number of redirects issued per time frame.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..60

vRtrIfIcmpUnreachables		1.3.6.1.4.1.6527.3.1.2.3.4.1.17
When vRtrIfIcmpUnreachables is set to 'true', ICMP host and network unreachable messages are generated by this interface. When vRtrIfIcmpUnreachables is set to 'false', ICMP host and network unreachable messages are not sent.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrIfIcmpNumUnreachables		1.3.6.1.4.1.6527.3.1.2.3.4.1.18
The value of vRtrIfIcmpNumUnreachables determines how many destination unreachable messages are issued in the time frame specified by vRtrIfIcmpUnreachablesTime.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	10..1000

vRtrIfIcmpUnreachablesTime		1.3.6.1.4.1.6527.3.1.2.3.4.1.19
The value of vRtrIfIcmpUnreachablesTime sets the time frame in seconds that is used to limit the number of destination unreachable messages issued per time frame.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..60

vRtrIfIcmpTtlExpired		1.3.6.1.4.1.6527.3.1.2.3.4.1.20
When vRtrIfIcmpTtlExpired is set to 'true', the rate that ttl-expired messages by this interface is throttled based on the values of vRtrIfIcmpNumTtlExpired and vRtrIfIcmpTtlExpiredTime. When vRtrIfIcmpTtlExpired is set to 'false', unlimited ttl-expired messages are sent.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrIfIcmpNumTtlExpired		1.3.6.1.4.1.6527.3.1.2.3.4.1.21
The value of vRtrIfIcmpNumTtlExpired defines how many ttl-expired messages will be issued in the time frame specified by vRtrIfIcmpTtlExpiredTime.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	10..1000

vRtrIfIcmpTtlExpiredTime		1.3.6.1.4.1.6527.3.1.2.3.4.1.22
The value of vRtrIfIcmpTtlExpiredTime sets the time frame in seconds that is used to limit the number of ttl-expired messages issued by this interface with the specified time frame.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..60

vRtrIfNtpBroadcast		1.3.6.1.4.1.6527.3.1.2.3.4.1.23
When vRtrIfNtpBroadcast is set to 'true', the NTP broadcasts will be transmitted on this interface.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrIfUnnumbered		1.3.6.1.4.1.6527.3.1.2.3.4.1.24
The IP address to be used when generating packets on this interface. This variable is complemented by vRtrIfUnnumbered. If vRtrIfUnnumberedIf is a null-string and vRtrIfUnnumbered is '0.0.0.0' it implies that no unnumbered interface is configured. At any instant only one of the two members can be non-null. A value of '255.255.255.255' implies the use of system-ip. It is strongly suggested to use the node's system IP address as it is not associated with a particular physical interface and is therefore always reachable.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

vRtrIfMtu		1.3.6.1.4.1.6527.3.1.2.3.4.1.25
The value of vRtrIfMtu is used to reflect the MTU size of this interface in the header of an ICMP MTU exceeded message when a packet is too large to be transmitted on this interface. The default size is calculated by subtracting the DLC header size from the physical MTU size of the interface. When a SNMP SET request is received with a value of zero (0), the agent actually sets vRtrIfMtu to the calculated default size.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0 | 512..9000

vRtrIfQosPolicyId		1.3.6.1.4.1.6527.3.1.2.3.4.1.26
The value of vRtrIfQosPolicyId associates a pre-existing network-policy-id to a network interface. Packets are marked using qos policies on edge switches; invoking a qos policy on a network port allows for the packets that match the policy criteria to be remarked. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface.
Status: current	Access: read-create
OBJECT-TYPE
	TNetworkPolicyID

vRtrIfIngressFilterId		1.3.6.1.4.1.6527.3.1.2.3.4.1.27
The value of vRtrIfIngressFilterId associates an ip-filter-id with an ingress interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface.
Status: current	Access: read-create
OBJECT-TYPE
	TIPFilterID

vRtrIfEgressFilterId		1.3.6.1.4.1.6527.3.1.2.3.4.1.28
The value of vRtrIfEgressFilterId associates an ip-filter-id with an egress interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface.
Status: current	Access: read-create
OBJECT-TYPE
	TIPFilterID

vRtrIfDirectedBroadcast		1.3.6.1.4.1.6527.3.1.2.3.4.1.29
When vRtrIfDirectedBroadcast is set to 'true', allows broadcasts directed to this interface to be accepted. When 'false', directed broadcasts are dropped. This is of particular use when preventing denial of service attacks.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrIfMplsStatus		1.3.6.1.4.1.6527.3.1.2.3.4.1.30
Setting this variable to 'create' causes this interface to be used with MPLS. It also causes a row to be created in the vRtrMplsIfTable. Setting it to 'delete' removes the interface from MPLS and causes the corresponding row in the vRtrMplsIfTable to be removed. However, an attempt to set vRtrIfMplsStatus to 'delete' will fail if MPLS activity on this interface is not administratively in the outOfService state, i.e. vRtrMplsIfAdminState of the vRtrMplsIfTable must be set to 'outOfService'.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxStatus

vRtrIfUnnumberedIf		1.3.6.1.4.1.6527.3.1.2.3.4.1.31
The name of the interface to which this unnumbered interface will refer to. This variable is complemented by vRtrIfUnnumbered. If vRtrIfUnnumberedIf is a null-string and vRtrIfUnnumbered is '0' it implies that no unnumbered interface is configured. At any instant only one of the two members can be non-null.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..32)

vRtrIfCflowd		1.3.6.1.4.1.6527.3.1.2.3.4.1.32
The value of vRtrIfCflowd specifies the type of Cflowd analysis applied to this interface. A Cflowd profile controls the sampling and analysis of data flows through the router. A value of none (1) indicates that there is no Cflowd analysis associated with this interface.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	none(1), acl(2), interface(3)

vRtrIfVPNClass		1.3.6.1.4.1.6527.3.1.2.3.4.1.33
The value of vRtrIfVPNClass specifies the type of VPN scenario supported on this virtual router interface.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), carrierOfCarrier(1), enterprise(2), interProvider(3)

vRtrIfDescription		1.3.6.1.4.1.6527.3.1.2.3.4.1.34
The value of vRtrIfDescription is a user provided description string for this virtual router interface. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
Status: current	Access: read-create
OBJECT-TYPE
	TItemLongDescription

vRtrIfProtocol		1.3.6.1.4.1.6527.3.1.2.3.4.1.35
The value of vRtrIfProtocol indicates which protocols are running on this virtual router interface. If the bit corresponding to a protocol is set, then the protocol is enabled on this interface.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	ospfv2(0), rip(1), isis(2), bgp(3), mpls(4), rsvp(5), ldp(6), igmp(7), pim(8), ospf3(9), mld(10)

vRtrIfTosMarkingTrusted		1.3.6.1.4.1.6527.3.1.2.3.4.1.36
The value of vRtrIfTosMarkingTrusted specifies whether the TOS bits on the packets ingressing on the interface should be trusted by the system or not. If the value is set to 'true', the TOS bits should be trusted. If the system does not trust these packets, it will remark the packets upon egress as indicated by the value of the egress remark flag, ALCATEL-IND1-TIMETRA-QOS-MIB:: tNetworkPolicyEgressRemark. The egress remark flag is part of the QoS policy applied to the network interface. The interfaces belonging to the IES service have the egress remark flag set to not trusted, 'false', by default. For all other interface types, the TOS bits are trusted by default.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrIfServiceId		1.3.6.1.4.1.6527.3.1.2.3.4.1.37
The value of vRtrIfServiceId specifies the service id for this interface. This object must always be set at row creation when the vRtrIfType is not network(1). This object cannot be modified once the row is created.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxServId

vRtrIfArpPopulate		1.3.6.1.4.1.6527.3.1.2.3.4.1.38
The value of the object vRtrIfArpPopulate specifies the ARP populate action. The value disabled means that the normal ARP protocol is active. The value enabled means that the system will not originate ARP requests on this interface. The ARP cache is only populated with MAC addresses learned via the DHCP protocol. If the value of vRtrIfType is network, this object can only be set to disabled.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

vRtrIfIPv6ConfigAllowed		1.3.6.1.4.1.6527.3.1.2.3.4.1.39
The value of vRtrIfIPv6ConfigAllowed specifies whether IPv6 can be configured on this router interface. When the value is 'true', IPv6 can be configured on this interface. When it is 'false', IPv6 cannot be configured.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrIfIPv6OperState		1.3.6.1.4.1.6527.3.1.2.3.4.1.40
The current operational status for IPv6 on this router interface.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxOperState

vRtrIfIPv6IngressFilterId		1.3.6.1.4.1.6527.3.1.2.3.4.1.41
The value of vRtrIfIPv6IngressFilterId associates an ip-filter-id with an ingress v6 interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface.
Status: current	Access: read-create
OBJECT-TYPE
	TIPFilterID

vRtrIfIPv6EgressFilterId		1.3.6.1.4.1.6527.3.1.2.3.4.1.42
The value of vRtrIfIPv6EgressFilterId associates an ip-filter-id with an egress v6 interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface.
Status: current	Access: read-create
OBJECT-TYPE
	TIPFilterID

vRtrIfIcmpV6Redirects		1.3.6.1.4.1.6527.3.1.2.3.4.1.43
When vRtrIfIcmpV6Redirects is set to 'true', ICMPv6 redirects are generated when routes are not optimal on this router and another router on the same subnetwork has a better route in order to alert that node that a better route is available. When vRtrIfIcmpV6Redirects is set to 'false', ICMPv6 redirects are not generated.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrIfIcmpV6NumRedirects		1.3.6.1.4.1.6527.3.1.2.3.4.1.44
The value of vRtrIfIcmpV6NumRedirects limits the number of v6 redirects issued per the time frame specified in vRtrIfIcmpV6RedirectsTime.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	10..1000

vRtrIfIcmpV6RedirectsTime		1.3.6.1.4.1.6527.3.1.2.3.4.1.45
The value of vRtrIfIcmpV6RedirectsTime determines the time frame in seconds that is used to limit the number of v6 redirects issued per time frame.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..60

vRtrIfIcmpV6Unreachables		1.3.6.1.4.1.6527.3.1.2.3.4.1.46
When vRtrIfIcmpV6Unreachables is set to 'true', ICMPv6 host and network unreachable messages are generated by this interface. When vRtrIfIcmpV6Unreachables is set to 'false', ICMPv6 host and network unreachable messages are not sent.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrIfIcmpV6NumUnreachables		1.3.6.1.4.1.6527.3.1.2.3.4.1.47
The value of vRtrIfIcmpV6NumUnreachables determines how many destination unreachable ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6UnreachablesTime.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	10..1000

vRtrIfIcmpV6UnreachablesTime		1.3.6.1.4.1.6527.3.1.2.3.4.1.48
The value of vRtrIfIcmpV6UnreachablesTime sets the time frame in seconds that is used to limit the number of destination unreachable ICMPv6 messages issued per time frame.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..60

vRtrIfIcmpV6TimeExceeded		1.3.6.1.4.1.6527.3.1.2.3.4.1.49
The value of vRtrIfIcmpV6TimeExceeded specifies whether time-exceeded ICMP messages should be sent. When it is set to 'true', ICMPv6 time-exceeded messages are generated by this interface. When vRtrIfIcmpV6TimeExceeded is set to 'false', ICMPv6 time-exceeded messages are not sent.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrIfIcmpV6NumTimeExceeded		1.3.6.1.4.1.6527.3.1.2.3.4.1.50
The value of vRtrIfIcmpV6NumTimeExceeded specifies how many time-exceeded ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6TimeExceededTime.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	10..1000

vRtrIfIcmpV6TimeExceededTime		1.3.6.1.4.1.6527.3.1.2.3.4.1.51
The value of vRtrIfIcmpV6TimeExceededTime specifies the time frame in seconds that is used to limit the number of time-exceeded ICMPv6 messages issued per time frame.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..60

vRtrIfIcmpV6PktTooBig		1.3.6.1.4.1.6527.3.1.2.3.4.1.52
The value of vRtrIfIcmpV6PktTooBig specifies whether packet-too-big ICMP messages should be sent. When it is set to 'true', ICMPv6 packet-too-big messages are generated by this interface. When vRtrIfIcmpV6PktTooBig is set to 'false', ICMPv6 packet-too-big messages are not sent.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrIfIcmpV6NumPktTooBig		1.3.6.1.4.1.6527.3.1.2.3.4.1.53
The value of vRtrIfIcmpV6NumPktTooBig specifies how many packet-too-big ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6PktTooBigTime.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	10..1000

vRtrIfIcmpV6PktTooBigTime		1.3.6.1.4.1.6527.3.1.2.3.4.1.54
The value of vRtrIfIcmpV6PktTooBigTime specifies the time frame in seconds that is used to limit the number of packet-too-big ICMPv6 messages issued per time frame.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..60

vRtrIfIcmpV6ParamProblem		1.3.6.1.4.1.6527.3.1.2.3.4.1.55
The value of vRtrIfIcmpV6ParamProblem specifies whether parameter-problem ICMP messages should be sent. When it is set to 'true', ICMPv6 parameter-problem messages are generated by this interface. When vRtrIfIcmpV6ParamProblem is set to 'false', ICMPv6 parameter-problem messages are not sent.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrIfIcmpV6NumParamProblem		1.3.6.1.4.1.6527.3.1.2.3.4.1.56
The value of vRtrIfIcmpV6NumParamProblem specifies how many parameter-problem ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6ParamProblemTime.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	10..1000

vRtrIfIcmpV6ParamProblemTime		1.3.6.1.4.1.6527.3.1.2.3.4.1.57
The value of vRtrIfIcmpV6ParamProblemTime specifies the time frame in seconds that is used to limit the number of parameter-problem ICMPv6 messages issued per time frame.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..60

vRtrIfLinkLocalAddressType		1.3.6.1.4.1.6527.3.1.2.3.4.1.58
The value of vRtrIfLinkLocalAddressType indicates the IP address type of the link local address of this virtual router interface. When the value of vRtrIfIPv6OperState is 'inService', this object will have a value of 'ipv6z', and 'unknown' otherwise.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressType

vRtrIfLinkLocalAddress		1.3.6.1.4.1.6527.3.1.2.3.4.1.59
The value of vRtrIfLinkLocalAddress indicates the link local IP address of this virtual router interface. This address valid when the value of vRtrIfIPv6OperState is 'inService'.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress	Size(0|20)

vRtrIfLinkLocalAddressState		1.3.6.1.4.1.6527.3.1.2.3.4.1.60
The value of vRtrIfLinkLocalAddressState indicates the address state of vRtrIfLinkLocalAddress. When vRtrIfIPv6OperState is 'outOfService', the value of this object is 'unknown'.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxInetAddrState

vRtrIfLastOperStateChange		1.3.6.1.4.1.6527.3.1.2.3.4.1.61
The value of vRtrIfLastOperStateChange indicates the sysUpTime when the operational state of this interface last changed.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrIfOperMtu		1.3.6.1.4.1.6527.3.1.2.3.4.1.62
The value of vRtrIfOperMtu indicates the operational value of the IP MTU on this interface. It is the minimum of the vRtrIfMtu and the MTU of the physical port this interface is bound to.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrIfGlobalIndex		1.3.6.1.4.1.6527.3.1.2.3.4.1.63
The value of vRtrIfGlobalIndex uniquely identifies this interface in the tmnx system. This field provides an identifier for router interfaces similar to the vRtrIfIndex value, except that vRtrIfIndex is unique within each virtual router. The vRtrIfGlobalIndex is unique system wide regardless of the vRtrID. The vRtrIfGlobalIndex value for each virtual interface must remain constant at least from one re-initialization of the system management processor to the next.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..65535

vRtrIfDelaySeconds		1.3.6.1.4.1.6527.3.1.2.3.4.1.64
The value of vRtrIfDelaySeconds specifies the time in seconds that is used to bring up the interface. When interface comes up, it will not become operational until after the specified delay. The default value of vRtrIfDelaySeconds is 0. It indicates that the interface will become operational as soon as it is enabled.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..1200

vRtrIfDelayUpTimer		1.3.6.1.4.1.6527.3.1.2.3.4.1.65
The value of vRtrIfDelayUpTimer indicates the time left before the interface comes up when vRtrIfDelaySeconds is configured to a non-zero value. When the interface is down, this object will return the value -1. It's value can be in the range 0 to vRtrIfDelaySeconds's value if the interface is 'about to come up'. If the interface is up, the value of vRtrIfDelayUpTimer will be 0.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

vRtrIfLocalDhcpServerName		1.3.6.1.4.1.6527.3.1.2.3.4.1.66
The value of vRtrIfLocalDhcpServerName specifies the local DHCP server that can be reached via this interface. The server itself is configured on virtual router level in object TIMETRA-DHCP-SERVER-MIB::tmnxDhcpServerCfgServerName. Assigning an ip-address to it is done here by linking it to an interface. A server can be linked to several interfaces on the same virtual router.
Status: current	Access: read-create
OBJECT-TYPE
	TNamedItemOrEmpty

vRtrIfInitDelayEnable		1.3.6.1.4.1.6527.3.1.2.3.4.1.67
The value of vRtrIfInitDelayEnable specifies whether vRtrIfDelaySeconds is used only the next time or everytime the system attempts to bring the interface operationally up. The value of vRtrIfInitDelayEnable is ignored if the value of vRtrIfDelaySeconds is set to 0. The value of vRtrIfInitDelayEnable is only set when interface is of type subscriber-interface. When the value vRtrIfInitDelayEnable is set to 'false', everytime the system attempts to bring the interface operationally up, it will be delayed by the value of vRtrIfDelaySeconds. When the value vRtrIfInitDelayEnable is set to 'true', only the next time the system attempts to bring the interface operationally up, it will be delayed by the value of vRtrIfDelaySeconds.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrIfCpmProtPolicyId		1.3.6.1.4.1.6527.3.1.2.3.4.1.68
The value of vRtrIfCpmProtPolicyId associates a CPM Protection policy with an interface. A value of zero (0) specifies that no CPM Protection policy is associated with this interface. A value of one (1) specifies that the default CPM Protection policy is associated with this interface. If no value for vRtrIfCpmProtPolicyId is specified when the vRtrIfEntry is created, the system assigns a default value, derived from the value of the object vRtrIfType, as follows: vRtrIfType vRtrIfCpmProtPolicyId --------------------------------------------------------------------- network 1 service used internally. serviceIes 1 serviceRtdVpls obsoleted. serviceVprn 1 serviceIesSubscriber 0 serviceIesGroup 0 serviceVprnSubscriber used internally. serviceVprnGroup 0 serviceIesRedundant 0 serviceVprnRedundant 0 serviceVpls 0 serviceIesCem defined on a SAP. --not supported serviceVprnCem defined on a SAP. --not supported serviceVprnIPsec 0 serviceVprnIPMirror 0 If an interface would get a default value of 'one', it is not allowed to set the value of vRtrIfCpmProtPolicyId to 'zero'. If an interface would get a default value of 'zero', it is not allowed to modify the value of vRtrIfCpmProtPolicyId. This object is not supported on SR-1 and ESS-1, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5', and 7710, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'.
Status: current	Access: read-create
OBJECT-TYPE
	TCpmProtPolicyID

vRtrIfCpmProtUncfgdProtoDropCnt		1.3.6.1.4.1.6527.3.1.2.3.4.1.69
The value of vRtrIfCpmProtUncfgdProtoDropCnt indicates the number of network control protocol messages dropped due to the operation of the protocol protection facility. The protocol protection facility can be enabled and disabled by means of the object TIMETRA-SECURITY-MIB::tmnxCpmProtDropUncfgdProtocolMsg. When the protocol protection facility is enabled, network control protocol traffic received on this virtual router interface is dropped if the protocol is not configured on this virtual router interface. The value of vRtrIfProtocol indicates which protocols are configured on this virtual router interface. This object is not supported on SR-1 and ESS-1, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5', and 7710, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrIfLdpSyncTimer		1.3.6.1.4.1.6527.3.1.2.3.4.1.70
The value of vRtrIfLdpSyncTimer specifies a time interval used for IGP-LDP synchronization. The timer is started from the time the LDP session to the neighbor is up over the interface. This is to allow for the label FEC bindings to be exchanged. When the timer expires, the link cost is restored and is re-advertised. IGP will announce a new best next-hop and LDP will use it if the label binding for the neighbor's FEC is available.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0 | 1..1800

vRtrIcmp6Table		1.3.6.1.4.1.6527.3.1.2.3.31
The vRtrIcmp6Table table contains statistics of ICMPv6 messages that are received and sourced by a router instance.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrIcmp6Entry

vRtrIcmp6Entry		1.3.6.1.4.1.6527.3.1.2.3.31.1
Each row entry represents the ICMP statistics of a virtual router instance. Entries are created and deleted when entries in the vRtrConfEntry are created and deleted.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrIcmp6Entry

vRtrIcmp6InMsgs		1.3.6.1.4.1.6527.3.1.2.3.31.1.1
The value of vRtrIcmp6InMsgs indicates the total number of ICMP messages received by this router instance which includes all those counted by vRtrIcmp6InErrors.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIcmp6InErrors		1.3.6.1.4.1.6527.3.1.2.3.31.1.2
The value of vRtrIcmp6InErrors indicates the number of ICMP messages which this router instance received but determined as having ICMP-specific errors (bad ICMP checksums, bad length , etc.).
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIcmp6InDestUnreachs		1.3.6.1.4.1.6527.3.1.2.3.31.1.3
The value of vRtrIcmp6InDestUnreachs indicates the number of ICMP Destination Unreachable messages received by this router instance.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIcmp6InAdminProhibs		1.3.6.1.4.1.6527.3.1.2.3.31.1.4
The value of vRtrIcmp6InAdminProhibs indicates the number of ICMP destination unreachable/communication administratively prohibited messages received by this router instance.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIcmp6InTimeExcds		1.3.6.1.4.1.6527.3.1.2.3.31.1.5
The value of vRtrIcmp6InTimeExcds indicates the number of ICMP Time Exceeded messages received by this router instance.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIcmp6InParmProblems		1.3.6.1.4.1.6527.3.1.2.3.31.1.6
The value of vRtrIcmp6InParmProblems indicates the number of ICMP Parameter Problem messages received by this router instance.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIcmp6InPktTooBigs		1.3.6.1.4.1.6527.3.1.2.3.31.1.7
The value of vRtrIcmp6InPktTooBigs indicates the number of ICMP Packet Too Big messages received by this router instance.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIcmp6InEchos		1.3.6.1.4.1.6527.3.1.2.3.31.1.8
The value of vRtrIcmp6InEchos indicates the number of ICMP Echo (request) messages received by this router instance.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIcmp6InEchoReplies		1.3.6.1.4.1.6527.3.1.2.3.31.1.9
The value of vRtrIcmp6InEchoReplies indicates the number of ICMP Echo Reply messages received by this router instance.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIcmp6InRtrSolicits		1.3.6.1.4.1.6527.3.1.2.3.31.1.10
The value of vRtrIcmp6InRtrSolicits indicates the number of ICMP Router Solicit messages received by this router instance.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIcmp6InRtrAdvertisements		1.3.6.1.4.1.6527.3.1.2.3.31.1.11
The value of vRtrIcmp6InRtrAdvertisements indicates the number of ICMP Router Advertisement messages received by this router instance.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIcmp6InNbrSolicits		1.3.6.1.4.1.6527.3.1.2.3.31.1.12
The value of vRtrIcmp6InNbrSolicits indicates the number of ICMP Neighbor Solicit messages received by this router instance.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIcmp6InNbrAdvertisements		1.3.6.1.4.1.6527.3.1.2.3.31.1.13
The value of vRtrIcmp6InNbrAdvertisements indicates the number of ICMP Neighbor Advertisement messages received by this router instance.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIcmp6InRedirects		1.3.6.1.4.1.6527.3.1.2.3.31.1.14
The value of vRtrIcmp6InRedirects indicates number of ICMP Redirect messages received by this router instance.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIcmp6InGrpMembQueries		1.3.6.1.4.1.6527.3.1.2.3.31.1.15
The value of vRtrIcmp6InGrpMembQueries indicates the number of ICMP Group Membership Query messages received by this router instance.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIcmp6InGrpMembResponses		1.3.6.1.4.1.6527.3.1.2.3.31.1.16
The value of vRtrIcmp6InGrpMembResponses indicates the number of ICMP Group Membership Response messages received by this router instance.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIcmp6InGrpMembReductions		1.3.6.1.4.1.6527.3.1.2.3.31.1.17
The value of vRtrIcmp6InGrpMembReductions indicates the number of ICMP Group Membership Reduction messages received by this router instance.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIcmp6OutMsgs		1.3.6.1.4.1.6527.3.1.2.3.31.1.18
The value of vRtrIcmp6OutMsgs indicates the total number of ICMP messages which this router instance attempted to send. Note that this counter includes all those counted by icmpOutErrors.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIcmp6OutErrors		1.3.6.1.4.1.6527.3.1.2.3.31.1.19
The value of vRtrIcmp6OutErrors indicates the number of ICMP messages which this router instance did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of VRtrIpv6 to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIcmp6OutDestUnreachs		1.3.6.1.4.1.6527.3.1.2.3.31.1.20
The value of vRtrIcmp6OutDestUnreachs indicates the number of ICMP Destination Unreachable messages sent by this router instance.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIcmp6OutAdminProhibs		1.3.6.1.4.1.6527.3.1.2.3.31.1.21
The value of vRtrIcmp6OutAdminProhibs indicates the number of ICMP destination unreachable/communication administratively prohibited messages sent by this router instance.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIcmp6OutTimeExcds		1.3.6.1.4.1.6527.3.1.2.3.31.1.22
The value of vRtrIcmp6OutTimeExcds indicates the number of ICMP Time Exceeded messages sent by this router instance.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIcmp6OutParmProblems		1.3.6.1.4.1.6527.3.1.2.3.31.1.23
The value of vRtrIcmp6OutParmProblems indicates the number of ICMP Parameter Problem messages sent by this router instance.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIcmp6OutPktTooBigs		1.3.6.1.4.1.6527.3.1.2.3.31.1.24
The value of vRtrIcmp6OutPktTooBigs indicates the number of ICMP Packet Too Big messages sent by this router instance.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIcmp6OutEchos		1.3.6.1.4.1.6527.3.1.2.3.31.1.25
The value of vRtrIcmp6OutEchos indicates the number of ICMP Echo Request messages sent by this router instance.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIcmp6OutEchoReplies		1.3.6.1.4.1.6527.3.1.2.3.31.1.26
The value of vRtrIcmp6OutEchoReplies indicates the number of ICMP Echo Reply messages sent by this router instance.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIcmp6OutRtrSolicits		1.3.6.1.4.1.6527.3.1.2.3.31.1.27
The value of vRtrIcmp6OutRtrSolicits indicates the number of ICMP Router Solicitation messages sent by this router instance.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIcmp6OutRtrAdvertisements		1.3.6.1.4.1.6527.3.1.2.3.31.1.28
The value of vRtrIcmp6OutRtrAdvertisements indicates the number of ICMP Router Advertisement messages sent by this router instance.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIcmp6OutNbrSolicits		1.3.6.1.4.1.6527.3.1.2.3.31.1.29
The value of vRtrIcmp6OutNbrSolicits indicates the number of ICMP Neighbor Solicitation messages sent by this router instance.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIcmp6OutNbrAdvertisements		1.3.6.1.4.1.6527.3.1.2.3.31.1.30
The value of vRtrIcmp6OutNbrAdvertisements indicates the number of ICMP Neighbor Advertisement messages sent by this router instance.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIcmp6OutRedirects		1.3.6.1.4.1.6527.3.1.2.3.31.1.31
The value of vRtrIcmp6OutRedirects indicates the number of ICMP Redirect messages sent by this router instance.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIcmp6OutGrpMembQueries		1.3.6.1.4.1.6527.3.1.2.3.31.1.32
The value of vRtrIcmp6OutGrpMembQueries indicates the number of ICMP Group Membership Query messages sent by this router instance.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIcmp6OutGrpMembResponses		1.3.6.1.4.1.6527.3.1.2.3.31.1.33
The value of vRtrIcmp6OutGrpMembResponses indicates the number of ICMP Group Membership Response messages sent by this router instance.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIcmp6OutGrpMembReductions		1.3.6.1.4.1.6527.3.1.2.3.31.1.34
The value of vRtrIcmp6OutGrpMembReductions indicates the number of ICMP Group Membership Reduction messages sent by this router instance.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfIcmp6Table		1.3.6.1.4.1.6527.3.1.2.3.32
The vRtrIfIcmp6Table table contains statistics of ICMPv6 messages that are received and sourced by a router interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrIfIcmp6Entry

vRtrIfIcmp6Entry		1.3.6.1.4.1.6527.3.1.2.3.32.1
Each row entry represents the ICMP statistics of a virtual router interface. Entries are created and deleted when entries in the vRtrIfTable are created and deleted.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrIfIcmp6Entry

vRtrIfIcmp6InMsgs		1.3.6.1.4.1.6527.3.1.2.3.32.1.1
The value of vRtrIfIcmp6InMsgs indicates the total number of ICMP messages received by this interface which includes all those counted by vRtrIfIcmp6InErrors. Note that this interface is the interface to which the ICMP messages were addressed which may not be necessarily the input interface for the messages.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfIcmp6InErrors		1.3.6.1.4.1.6527.3.1.2.3.32.1.2
The value of vRtrIfIcmp6InErrors indicates the number of ICMP messages which this interface received but determined as having ICMP-specific errors (bad ICMP checksums, bad length , etc.).
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfIcmp6InDestUnreachs		1.3.6.1.4.1.6527.3.1.2.3.32.1.3
The value of vRtrIfIcmp6InDestUnreachs indicates the number of ICMP Destination Unreachable messages received by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfIcmp6InAdminProhibs		1.3.6.1.4.1.6527.3.1.2.3.32.1.4
The value of vRtrIfIcmp6InAdminProhibs indicates the number of ICMP destination unreachable/communication administratively prohibited messages received by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfIcmp6InTimeExcds		1.3.6.1.4.1.6527.3.1.2.3.32.1.5
The value of vRtrIfIcmp6InTimeExcds indicates the number of ICMP Time Exceeded messages received by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfIcmp6InParmProblems		1.3.6.1.4.1.6527.3.1.2.3.32.1.6
The value of vRtrIfIcmp6InParmProblems indicates the number of ICMP Parameter Problem messages received by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfIcmp6InPktTooBigs		1.3.6.1.4.1.6527.3.1.2.3.32.1.7
The value of vRtrIfIcmp6InPktTooBigs indicates the number of ICMP Packet Too Big messages received by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfIcmp6InEchos		1.3.6.1.4.1.6527.3.1.2.3.32.1.8
The value of vRtrIfIcmp6InEchos indicates the number of ICMP Echo (request) messages received by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfIcmp6InEchoReplies		1.3.6.1.4.1.6527.3.1.2.3.32.1.9
The value of vRtrIfIcmp6InEchoReplies indicates the number of ICMP Echo Reply messages received by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfIcmp6InRtrSolicits		1.3.6.1.4.1.6527.3.1.2.3.32.1.10
The value of vRtrIfIcmp6InRtrSolicits indicates the number of ICMP Router Solicit messages received by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfIcmp6InRtrAdvertisements		1.3.6.1.4.1.6527.3.1.2.3.32.1.11
The value of vRtrIfIcmp6InRtrAdvertisements indicates the number of ICMP Router Advertisement messages received by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfIcmp6InNbrSolicits		1.3.6.1.4.1.6527.3.1.2.3.32.1.12
The value of vRtrIfIcmp6InNbrSolicits indicates the number of ICMP Neighbor Solicit messages received by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfIcmp6InNbrAdvertisements		1.3.6.1.4.1.6527.3.1.2.3.32.1.13
The value of vRtrIfIcmp6InNbrAdvertisements indicates the number of ICMP Neighbor Advertisement messages received by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfIcmp6InRedirects		1.3.6.1.4.1.6527.3.1.2.3.32.1.14
The value of vRtrIfIcmp6InRedirects indicates number of ICMP Redirect messages received by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfIcmp6InGrpMembQueries		1.3.6.1.4.1.6527.3.1.2.3.32.1.15
The value of vRtrIfIcmp6InGrpMembQueries indicates the number of ICMP Group Membership Query messages received by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfIcmp6InGrpMembResponses		1.3.6.1.4.1.6527.3.1.2.3.32.1.16
The value of vRtrIfIcmp6InGrpMembResponses indicates the number of ICMP Group Membership Response messages received by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfIcmp6InGrpMembReductions		1.3.6.1.4.1.6527.3.1.2.3.32.1.17
The value of vRtrIfIcmp6InGrpMembReductions indicates the number of ICMP Group Membership Reduction messages received by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfIcmp6OutMsgs		1.3.6.1.4.1.6527.3.1.2.3.32.1.18
The value of vRtrIfIcmp6OutMsgs indicates the total number of ICMP messages which this interface attempted to send. Note that this counter includes all those counted by icmpOutErrors.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfIcmp6OutErrors		1.3.6.1.4.1.6527.3.1.2.3.32.1.19
The value of vRtrIfIcmp6OutErrors indicates the number of ICMP messages which this interface did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of VRtrIpv6 to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfIcmp6OutDestUnreachs		1.3.6.1.4.1.6527.3.1.2.3.32.1.20
The value of vRtrIfIcmp6OutDestUnreachs indicates the number of ICMP Destination Unreachable messages sent by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfIcmp6OutAdminProhibs		1.3.6.1.4.1.6527.3.1.2.3.32.1.21
The value of vRtrIfIcmp6OutAdminProhibs indicates the number of ICMP destination unreachable/communication administratively prohibited messages sent by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfIcmp6OutTimeExcds		1.3.6.1.4.1.6527.3.1.2.3.32.1.22
The value of vRtrIfIcmp6OutTimeExcds indicates the number of ICMP Time Exceeded messages sent by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfIcmp6OutParmProblems		1.3.6.1.4.1.6527.3.1.2.3.32.1.23
The value of vRtrIfIcmp6OutParmProblems indicates the number of ICMP Parameter Problem messages sent by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfIcmp6OutPktTooBigs		1.3.6.1.4.1.6527.3.1.2.3.32.1.24
The value of vRtrIfIcmp6OutPktTooBigs indicates the number of ICMP Packet Too Big messages sent by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfIcmp6OutEchos		1.3.6.1.4.1.6527.3.1.2.3.32.1.25
The value of vRtrIfIcmp6OutEchos indicates the number of ICMP Echo Request messages sent by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfIcmp6OutEchoReplies		1.3.6.1.4.1.6527.3.1.2.3.32.1.26
The value of vRtrIfIcmp6OutEchoReplies indicates the number of ICMP Echo Reply messages sent by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfIcmp6OutRtrSolicits		1.3.6.1.4.1.6527.3.1.2.3.32.1.27
The value of vRtrIfIcmp6OutRtrSolicits indicates the number of ICMP Router Solicitation messages sent by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfIcmp6OutRtrSolicitsTime		1.3.6.1.4.1.6527.3.1.2.3.32.1.28
The value of vRtrIfIcmp6OutRtrSolicitsTime indicates the system time when the last router solicitation message was sent by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrIfIcmp6OutRtrAdvertisements		1.3.6.1.4.1.6527.3.1.2.3.32.1.29
The value of vRtrIfIcmp6OutRtrAdvertisements indicates the number of ICMP Router Advertisement messages sent by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfIcmp6OutRtrAdvTime		1.3.6.1.4.1.6527.3.1.2.3.32.1.30
The value of vRtrIfIcmp6OutRtrAdvTime indicates the system time when the last router advertisement message was sent by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrIfIcmp6OutNbrSolicits		1.3.6.1.4.1.6527.3.1.2.3.32.1.31
The value of vRtrIfIcmp6OutNbrSolicits indicates the number of ICMP Neighbor Solicitation messages sent by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfIcmp6OutNbrSolicitsTime		1.3.6.1.4.1.6527.3.1.2.3.32.1.32
The value of vRtrIfIcmp6OutNbrSolicitsTime indicates the system time when the last neighbor solicitation message was sent by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrIfIcmp6OutNbrAdvertisements		1.3.6.1.4.1.6527.3.1.2.3.32.1.33
The value of vRtrIfIcmp6OutNbrAdvertisements indicates the number of ICMP Neighbor Advertisement messages sent by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfIcmp6OutNbrAdvTime		1.3.6.1.4.1.6527.3.1.2.3.32.1.34
The value of vRtrIfIcmp6OutNbrAdvTime indicates the system time when the last neighbor advertisement message was sent by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrIfIcmp6OutRedirects		1.3.6.1.4.1.6527.3.1.2.3.32.1.35
The value of vRtrIfIcmp6OutRedirects indicates the number of ICMP Redirect messages sent by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfIcmp6OutGrpMembQueries		1.3.6.1.4.1.6527.3.1.2.3.32.1.36
The value of vRtrIfIcmp6OutGrpMembQueries indicates the number of ICMP Group Membership Query messages sent by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfIcmp6OutGrpMembResponses		1.3.6.1.4.1.6527.3.1.2.3.32.1.37
The value of vRtrIfIcmp6OutGrpMembResponses indicates the number of ICMP Group Membership Response messages sent by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfIcmp6OutGrpMembReductions		1.3.6.1.4.1.6527.3.1.2.3.32.1.38
The value of vRtrIfIcmp6OutGrpMembReductions indicates the number of ICMP Group Membership Reduction messages sent by this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfBfdTable		1.3.6.1.4.1.6527.3.1.2.3.33
The vRtrIfBfdTable table contains the configuration for Bi-directional Forwarding Detection (BFD) on the vRtrIfEntry with the same indices.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrIfBfdEntry

vRtrIfBfdEntry		1.3.6.1.4.1.6527.3.1.2.3.33.1
Each row entry represents the BFD configuration for an interface. Entries are created and deleted when entries in the vRtrIfTable are created and deleted.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrIfBfdEntry

vRtrIfBfdAdminState		1.3.6.1.4.1.6527.3.1.2.3.33.1.1
The value of vRtrIfBfdAdminState specifies the admin state of BFD on this interface. When it is 'inService', BFD sessions can be established on this interface. When it is 'outOfService', they cannot.
Status: current	Access: read-write
OBJECT-TYPE
	TmnxAdminState

vRtrIfBfdTransmitInterval		1.3.6.1.4.1.6527.3.1.2.3.33.1.2
The value of vRtrIfBfdTransmitInterval specifies the BFD transmit interval over this interface.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	100..100000

vRtrIfBfdReceiveInterval		1.3.6.1.4.1.6527.3.1.2.3.33.1.3
The value of vRtrIfBfdReceiveInterval specifies the BFD receive interval over this interface.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	100..100000

vRtrIfBfdMultiplier		1.3.6.1.4.1.6527.3.1.2.3.33.1.4
The value of vRtrIfBfdMultiplier specifies the the number of consecutive BFD messages that must be missed from the peer before the BFD session state is changed to down and the upper level protocols (OSPF, IS-IS or PIM) are notified of the fault.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	3..20

vRtrIfBfdEchoInterval		1.3.6.1.4.1.6527.3.1.2.3.33.1.5
The value of vRtrIfBfdEchoInterval specifies the BFD echo interval over this interface.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0 | 100..100000

vRtrIfBfdSessionTable		1.3.6.1.4.1.6527.3.1.2.3.34
The vRtrIfBfdSessionTable table contains per BFD session statistics and operational settings.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrIfBfdSessionEntry

vRtrIfBfdSessionEntry		1.3.6.1.4.1.6527.3.1.2.3.34.1
Each row entry represents a BFD session. Entries are created automatically by the system, or when a static-route is configured to use BFD.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrIfBfdSessionEntry

vRtrIfBfdSessionLclAddrType		1.3.6.1.4.1.6527.3.1.2.3.34.1.1
The value of vRtrIfBfdSessionLclAddrType indicates the address type in vRtrIfBfdSessionLclAddr.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressType

vRtrIfBfdSessionLclAddr		1.3.6.1.4.1.6527.3.1.2.3.34.1.2
The value of vRtrIfBfdSessionLclAddr indicates the address of the local endpoint of this BFD session. Its type is specified by vRtrIfBfdSessionLclAddrType.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddress	Size(0|4)

vRtrIfBfdSessionRemAddrType		1.3.6.1.4.1.6527.3.1.2.3.34.1.3
The value of vRtrIfBfdSessionRemAddrType indicates the address type in vRtrIfBfdSessionRemAddr.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressType

vRtrIfBfdSessionRemAddr		1.3.6.1.4.1.6527.3.1.2.3.34.1.4
The value of vRtrIfBfdSessionRemAddr indicates the address of the local endpoint of this BFD session. Its type is specified by vRtrIfBfdSessionRemAddrType.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddress	Size(0|4)

vRtrIfBfdSessionOperState		1.3.6.1.4.1.6527.3.1.2.3.34.1.5
The value of vRtrIfBfdSessionOperState indicates the operational state of BFD on this interface.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxOperState

vRtrIfBfdSessionState		1.3.6.1.4.1.6527.3.1.2.3.34.1.6
The value of vRtrIfBfdSessionState indicates the state of the BFD protocl on this interface.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	adminDown(0), down(1), init(2), up(3)

vRtrIfBfdSessionOperFlags		1.3.6.1.4.1.6527.3.1.2.3.34.1.7
The value of vRtrIfBfdSessionOperFlags indicates the reasons why a BFD session is not up.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	noProtocols(0), noHeartBeat(1), echoFailed(2), nbrSignalDown(3), fwdPlaneReset(4), pathDown(5), nbrAdminDown(6), adminClear(7)

vRtrIfBfdSessionMesgRecv		1.3.6.1.4.1.6527.3.1.2.3.34.1.8
The value of vRtrIfBfdSessionMesgRecv indicates the number of messages received in this session.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfBfdSessionMesgSent		1.3.6.1.4.1.6527.3.1.2.3.34.1.9
The value of vRtrIfBfdSessionMesgSent indicates the number of messages sent in this session.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfBfdSessionLastDownTime		1.3.6.1.4.1.6527.3.1.2.3.34.1.10
The value of vRtrIfBfdSessionLastDownTime indicates the system time when this session last went down.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrIfBfdSessionLastUpTime		1.3.6.1.4.1.6527.3.1.2.3.34.1.11
The value of vRtrIfBfdSessionLastUpTime indicates the system time when this session last came up.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrIfBfdSessionUpCount		1.3.6.1.4.1.6527.3.1.2.3.34.1.12
The value of vRtrIfBfdSessionUpCount indicates the number of times vRtrIfBfdSessionOperState changed from 'outOfService' to 'inService'.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfBfdSessionDownCount		1.3.6.1.4.1.6527.3.1.2.3.34.1.13
The value of vRtrIfBfdSessionDownCount indicates the number of times vRtrIfBfdSessionOperState changed from 'inService' to 'outOfService'.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfBfdSessionLclDisc		1.3.6.1.4.1.6527.3.1.2.3.34.1.14
The value of vRtrIfBfdSessionLclDisc indicates the unique local discriminator for this session.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrIfBfdSessionRemDisc		1.3.6.1.4.1.6527.3.1.2.3.34.1.15
The value of vRtrIfBfdSessionRemDisc indicates the remote discriminator for this session.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrIfBfdSessionProtocols		1.3.6.1.4.1.6527.3.1.2.3.34.1.16
The value of vRtrIfBfdSessionProtocols indicates which protocols are using this BFD session.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	ospfv2(0), pim(1), isis(2), staticRoute(3), mcRing(4), rsvp(5), bgp(6)

vRtrIfBfdSessionTxInterval		1.3.6.1.4.1.6527.3.1.2.3.34.1.17
The value of vRtrIfBfdSessionTxInterval indicates the negotiated transmit interval. This value is the minimum of the local node's 'vRtrIfBfdTransmitInterval' and the remote node's receive interval.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrIfBfdSessionRxInterval		1.3.6.1.4.1.6527.3.1.2.3.34.1.18
The value of vRtrIfBfdSessionRxInterval indicates the negotiated receive interval. This value is the minimum of the local node's 'vRtrIfBfdReceiveInterval' and the remote node's transmit interval.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrIfBfdSessionType		1.3.6.1.4.1.6527.3.1.2.3.34.1.19
The value of vRtrIfBfdSessionType indicates if the bfd session is running on IOM or CPM.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	iom(1), cpm(2)

vRtrIfProxyArpTable		1.3.6.1.4.1.6527.3.1.2.3.18
The vRtrIfProxyArpTable provides an extension to the vRtrIfTable. It has an entry for each virtual router interface configured in the system.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrIfProxyArpEntry

vRtrIfProxyArpEntry		1.3.6.1.4.1.6527.3.1.2.3.18.1
Each row entry represents information related to Proxy ARP for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrIfProxyArpEntry

vRtrIfProxyArp		1.3.6.1.4.1.6527.3.1.2.3.18.1.1
If the value of vRtrIfProxyArp is set to 'true', proxy ARP is enabled on this interface. If this value is 'false', proxy ARP is disabled on the interface.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrIfProxyArpLocal		1.3.6.1.4.1.6527.3.1.2.3.18.1.2
If the value of vRtrIfProxyArpLocal is set to 'true', local proxy ARP is enabled, that is, the interface will reply to ARP requests even if both the hosts are on the same subnet. In this case ICMP redirects will be disabled. If the value of vRtrIfProxyArpLocal is set to 'false', the interface will not reply to ARP requests if both the hosts are on the same subnet.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrIfProxyArpPolicy1		1.3.6.1.4.1.6527.3.1.2.3.18.1.3
The value of vRtrIfProxyArpPolicy1 is used to specify the first proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy1 has no effect if vRtrIfProxyArp is set to 'false'.
Status: current	Access: read-create
OBJECT-TYPE
	TPolicyStatementNameOrEmpty

vRtrIfProxyArpPolicy2		1.3.6.1.4.1.6527.3.1.2.3.18.1.4
The value of vRtrIfProxyArpPolicy2 is used to specify the second proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy2 has no effect if vRtrIfProxyArp is set to 'false'.
Status: current	Access: read-create
OBJECT-TYPE
	TPolicyStatementNameOrEmpty

vRtrIfProxyArpPolicy3		1.3.6.1.4.1.6527.3.1.2.3.18.1.5
The value of vRtrIfProxyArpPolicy3 is used to specify the third proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy3 has no effect if vRtrIfProxyArp is set to 'false'.
Status: current	Access: read-create
OBJECT-TYPE
	TPolicyStatementNameOrEmpty

vRtrIfProxyArpPolicy4		1.3.6.1.4.1.6527.3.1.2.3.18.1.6
The value of vRtrIfProxyArpPolicy4 is used to specify the fourth proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy4 has no effect if vRtrIfProxyArp is set to 'false'.
Status: current	Access: read-create
OBJECT-TYPE
	TPolicyStatementNameOrEmpty

vRtrIfProxyArpPolicy5		1.3.6.1.4.1.6527.3.1.2.3.18.1.7
The value of vRtrIfProxyArpPolicy5 is used to specify the fifth proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy5 has no effect if vRtrIfProxyArp is set to 'false'.
Status: current	Access: read-create
OBJECT-TYPE
	TPolicyStatementNameOrEmpty

vRtrIfDHCPTable		1.3.6.1.4.1.6527.3.1.2.3.19
The vRtrIfDHCPTable is used to configure the interface parameters for the DHCP Relay agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrIfDHCPEntry

vRtrIfDHCPEntry		1.3.6.1.4.1.6527.3.1.2.3.19.1
Each row entry represents information related to DHCP Relay for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrIfDHCPEntry

vRtrIfDHCPRelayInfoOption		1.3.6.1.4.1.6527.3.1.2.3.19.1.1
vRtrIfDHCPRelayInfoOption is used to enable/disable DHCP Option 82. If the value of this object is set to 'false', DHCP Relay is disabled.
Status: obsolete	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrIfDHCPRelayInfoAction		1.3.6.1.4.1.6527.3.1.2.3.19.1.2
vRtrIfDHCPRelayInfoAction is used to configure the DHCP Relay reforwarding policy. replace(1) - replace existing information with DHCP relay information drop(2) - discard messages with existing relay information if the option-82 information is also present. keep(3) - retain the existing relay information.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	replace(1), drop(2), keep(3)

vRtrIfDHCPRelayCircuitId		1.3.6.1.4.1.6527.3.1.2.3.19.1.3
The value of the object vRtrIfDHCPRelayCircuitId specifies whether or not the circuit-id suboption is present, and if it is present what information goes in it. If the value of this object is set to 'none', the circuit-id suboption will not be part of the information option (option 82). If the value of this object is set to 'ifIndex', the value of the interface index is used. If the value of this object is set to 'asciiTuple', the ASCII-encoded concatenated tuple consisting of the - access-node-identifier - service-id - interface-name - SAP-id (only if the value of vRtrIfType is 'serviceIesGroup') is used. If the value of this object is set to 'sapId', the ASCII-encoded SAP-id is used. If the value of this object is set to 'vlan-ascii-tuple' - the format will include VLAN-id and dot1p bits in addition to what is included in ascii-tuple already. The format is supported on dot1q and qinq encapsulated ports only. Thus, when the option 82 bits are stripped, dot1p bits will be copied to the Ethernet header of an outgoing packet.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	none(0), ifIndex(1), asciiTuple(2), sapId(3), vlanAsciiTuple(4)

vRtrIfDHCPRelayRemoteId		1.3.6.1.4.1.6527.3.1.2.3.19.1.4
The value of vRtrIfDHCPRelayRemoteId specifies what information goes into the remote-id suboption in the DHCP Relay packet. If the value of this object is set to 'none', the remote-id suboption is left blank. If the value of this object is set to 'mac', the MAC address of the remote end is encoded in the suboption. If the value of the object is set to 'remote-id', vRtrIfDHCPRelayRemoteIdStr will be the remote-id.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	mac(1), none(2), remote-id(3)

vRtrIfDHCPAutoFilter		1.3.6.1.4.1.6527.3.1.2.3.19.1.5
vRtrIfDHCPAutoFilter allows the router to automatically build anti-spoofing filter lists. When this object is set to a non-zero value, auto-filtering is enabled and a filter allowing only PPPoE or DHCP traffic is established on the interface. The non-zero value indicates the maximum number of entries that the auto-filter can have. These entries are created by the agent upon snooping a valid DHCP Reply packet and are used to allow traffic sourced by the given DHCP-assigned IP address.
Status: obsolete	Access: read-create
OBJECT-TYPE
	Unsigned32	0..2000

vRtrIfDHCPRelayServer1		1.3.6.1.4.1.6527.3.1.2.3.19.1.6
vRtrIfDHCPRelayServer1 is used to configure the first DHCP server where the requests will be forwarded.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

vRtrIfDHCPRelayServer2		1.3.6.1.4.1.6527.3.1.2.3.19.1.7
vRtrIfDHCPRelayServer2 is used to configure the second DHCP server where the requests will be forwarded.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

vRtrIfDHCPRelayServer3		1.3.6.1.4.1.6527.3.1.2.3.19.1.8
vRtrIfDHCPRelayServer3 is used to configure the third DHCP server where the requests will be forwarded.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

vRtrIfDHCPRelayServer4		1.3.6.1.4.1.6527.3.1.2.3.19.1.9
vRtrIfDHCPRelayServer4 is used to configure the fourth DHCP server where the requests will be forwarded.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

vRtrIfDHCPRelayServer5		1.3.6.1.4.1.6527.3.1.2.3.19.1.10
vRtrIfDHCPRelayServer5 is used to configure the fifth DHCP server where the requests will be forwarded.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

vRtrIfDHCPRelayServer6		1.3.6.1.4.1.6527.3.1.2.3.19.1.11
vRtrIfDHCPRelayServer6 is used to configure the sixth DHCP server where the requests will be forwarded.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

vRtrIfDHCPRelayServer7		1.3.6.1.4.1.6527.3.1.2.3.19.1.12
vRtrIfDHCPRelayServer7 is used to configure the seventh DHCP server where the requests will be forwarded.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

vRtrIfDHCPRelayServer8		1.3.6.1.4.1.6527.3.1.2.3.19.1.13
vRtrIfDHCPRelayServer8 is used to configure the eighth DHCP server where the requests will be forwarded.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

vRtrIfDHCPRelayTrusted		1.3.6.1.4.1.6527.3.1.2.3.19.1.14
When the value of vRtrIfDHCPRelayTrusted is set to 'true(1)', the router will relay requests where the DHCP giaddr is zero.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrIfDHCPAdminState		1.3.6.1.4.1.6527.3.1.2.3.19.1.15
vRtrIfDHCPAdminState is used to configure the desired administrative state of DHCP on this interface. If the value of vRtrIfType is network this object can only be set to 'outOfService'.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxAdminState

vRtrIfDHCPSnooping		1.3.6.1.4.1.6527.3.1.2.3.19.1.16
vRtrIfDHCPSnooping is used to enable/disable snooping of DHCP packets received on interface.
Status: obsolete	Access: read-create
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

vRtrIfDHCPDescription		1.3.6.1.4.1.6527.3.1.2.3.19.1.17
The value of vRtrIfDHCPDescription is a user provided description string for DHCP on this virtual router interface. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
Status: current	Access: read-create
OBJECT-TYPE
	TItemDescription

vRtrIfDHCPAutoFilterId		1.3.6.1.4.1.6527.3.1.2.3.19.1.18
vRtrIfDHCPAutoFilterId maintains the auto-filter identifier being used for this interface.
Status: obsolete	Access: read-only
OBJECT-TYPE
	TFilterID

vRtrIfDHCPOperAutoFilter		1.3.6.1.4.1.6527.3.1.2.3.19.1.19
The value of vRtrIfDHCPOperAutoFilter indicates the number of active auto-filter entries per interface. These entries are created in the ALCATEL-IND1-TIMETRA-FILTER-MIB::tIPFilterTable by the agent by snooping valid 'DHCP ACK' messages.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Unsigned32	0..2000

vRtrIfDHCPAuthPolicy		1.3.6.1.4.1.6527.3.1.2.3.19.1.20
Defines which subscriber authentication policy must be applied when a subscriber message (e.g. DHCP, PPPoE, ...) is received on the interface. The authentication policy must be defined in tmnxSubAuthPlcyTable.
Status: current	Access: read-create
OBJECT-TYPE
	TPolicyStatementNameOrEmpty

vRtrIfDHCPLeasePopulate		1.3.6.1.4.1.6527.3.1.2.3.19.1.21
The value of the object vRtrIfDHCPLeasePopulate specifies the maximum number of DHCP lease states allowed on this interface.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..8000

vRtrIfDHCPOperLeasePopulate		1.3.6.1.4.1.6527.3.1.2.3.19.1.22
The value of the object vRtrIfDHCPOperLeasePopulate indicates the maximum number of DHCP lease states allocated on this interface.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..8000

vRtrIfDHCPGiAddressType		1.3.6.1.4.1.6527.3.1.2.3.19.1.23
The value of vRtrIfDHCPGiAddressType specifies the type of vRtrIfDHCPGiAddress, the gateway interface address.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressType

vRtrIfDHCPGiAddress		1.3.6.1.4.1.6527.3.1.2.3.19.1.24
The value of vRtrIfDHCPGiAddress specifies the gateway interface address. The type of this address is specified by the value of vRtrIfDHCPGiAddressType.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddress	Size(0|4)

vRtrIfDHCPGiAddressAsSrc		1.3.6.1.4.1.6527.3.1.2.3.19.1.25
The value of vRtrIfDHCPGiAddressAsSrc specifies whether the DHCP relay should use the gateway interface address as the source IP address when communicating with the DHCP server. When it is set to 'true(1)', the source IP address used to communicate with the DHCP server is the gateway interface address. When it is 'false', the source IP is the IP of the egress interface the IP packet goes out on.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrIfDHCPMatchOption82		1.3.6.1.4.1.6527.3.1.2.3.19.1.26
The value of vRtrIfDHCPMatchOption82 specifies whether the DHCP relay should use the circuit ID in the option 82 field in DHCP packets to match DHCP messages. When it is set to 'true(1)', the option 82 circuit ID is used in addition to the MAC address and transaction ID. When it is set to 'false', only the MAC address and transaction ID are used.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrIfDHCPRelayRemoteIdStr		1.3.6.1.4.1.6527.3.1.2.3.19.1.27
The value of vRtrIfDHCPRelayRemoteIdStr specifies the remote-id in the DHCP Relay packet if value of vRtrIfDHCPRelayRemoteId is set to 'remote-id'.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..32)

vRtrIfDHCPProxyAdminState		1.3.6.1.4.1.6527.3.1.2.3.19.1.28
The value of vRtrIfDHCPProxyAdminState specifies the desired administrative state of the proxy server on this interface. When it is set to 'inService', the proxy server is enabled only if vRtrIfDHCPAdminState is also set to 'inService'.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxAdminState

vRtrIfDHCPProxyServerAddr		1.3.6.1.4.1.6527.3.1.2.3.19.1.29
The value of vRtrIfDHCPProxyServerAddr specifies the IP address which will be used as the source address of the emulated DHCP server. If this IP address is not configured, the value of vRiaIpAddress will be used as the source address of the emulated DHCP server.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

vRtrIfDHCPProxyLeaseTime		1.3.6.1.4.1.6527.3.1.2.3.19.1.30
The value of vRtrIfDHCPProxyLeaseTime specifies in seconds how long a DHCP client is allowed to use the offered IP address. Value 0 means the lease time provided by a RADIUS or an upstream DHCP server will not be overridden. A lease time of 7 days is used when RADIUS does not provide a lease time.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0 | 300..315446399

vRtrIfDHCPProxyLTRadiusOverride		1.3.6.1.4.1.6527.3.1.2.3.19.1.31
The value of vRtrIfDHCPProxyLTRadiusOverride specifies whether or not the lease time provided by the RADIUS server is presented to the DHCP client. By default the proxy-server will always make use of vRtrIfDHCPProxyLeaseTime, regardless of what lease time information is provided from the RADIUS server. When vRtrIfDHCPProxyLTRadiusOverride is set to 'true(1)', the proxy-server will use the lease time information provided by the RADIUS server, regardless of the configured one.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrIfDHCPVendorIncludeOptions		0.1.3.6.1.4.1.6527.3.1.2.3.19.1.32
The value of vRtrIfDHCPVendorIncludeOptions specifies what is encoded in the Alcatel vendor specific sub-option of option 82. The value of this object is only used when vRtrIfDHCPRelayInfoAction is 'replace(1)'.
Status: current	Access: read-create
OBJECT-TYPE
	BITS	systemId(0), clientMac(1), serviceId(2), sapId(3)

vRtrIfDHCPVendorOptionString		1.3.6.1.4.1.6527.3.1.2.3.19.1.33
The value of vRtrIfDHCPVendorOptionString specifies the string that goes into the Alcatel vendor specific sub-option of option 82. This string is only used when vRtrIfDHCPRelayInfoAction is set to 'replace(1)'.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..32)

vRtrIfDHCPLayer2Header		1.3.6.1.4.1.6527.3.1.2.3.19.1.34
The value of vRtrIfDHCPLayer2Header specificies, together with the value of object vRtrIfDHCPAntiSpoofMacAddr, the MAC address that is used in anti-spoof entries for the lease states on this interface. When it is set to 'false (2)', the client hardware address from the DHCP payload, stored in ALCATEL-IND1-TIMETRA-SERV-MIB::svcDhcpLseStateChAddr, is used. When it is set to 'true (1)', the behavior depends on the value of vRtrIfDHCPAntiSpoofMacAddr. If vRtrIfDHCPAntiSpoofMacAddr is set to all zeros, the source MAC address in the L2 header of the DHCP packet is used. If vRtrIfDHCPAntiSpoofMacAddr is configured, then its value is used.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrIfDHCPAntiSpoofMacAddr		1.3.6.1.4.1.6527.3.1.2.3.19.1.35
The value of vRtrIfDHCPAntiSpoofMacAddr specifies, together with the value of object vRtrIfDHCPLayer2Header, the MAC address that is used in anti-spoof entries for the lease states on this interface. When vRtrIfDHCPLayer2Header is 'false (2)', the client hardware address from the DHCP payload, stored in ALCATEL-IND1-TIMETRA-SERV-MIB::svcDhcpLseStateChAddr, is used. When vRtrIfDHCPLayer2Header is 'true (1)' and the value of this object is all zeros, the source MAC address in the L2 header of the DHCP packet is used. When vRtrIfDHCPLayer2Header is 'true (1)' and the value of this object is not all zeros, then this value is used. This object can only be configured if the value of object vRtrIfDHCPLayer2Header is set to 'true (1)'.
Status: current	Access: read-create
OBJECT-TYPE
	MacAddress

vRtrIfDHCPClientApplications		3.1.3.6.1.4.1.6527.3.1.2.3.19.1.36
The value of vRtrIfDHCPClientApplications specifies the set of client applications that can make use of the DHCP relay functionality on this interface.
Status: current	Access: read-create
OBJECT-TYPE
	BITS	dhcp(0), pppoe(1)

vRtrIfDHCPRelayStatsTable		1.3.6.1.4.1.6527.3.1.2.3.20
The vRtrIfDHCPRelayStatsTable contains the statistics for the DHCP Relay agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrIfDHCPRelayStatsEntry

vRtrIfDHCPRelayStatsEntry		1.3.6.1.4.1.6527.3.1.2.3.20.1
Each row entry represents information related to DHCP Relay statistics for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrIfDHCPRelayStatsEntry

vRtrIfDHCPRelayRxPkts		1.3.6.1.4.1.6527.3.1.2.3.20.1.1
vRtrIfDHCPRelayRxPkts indicates the total number of packets received by the DHCP relay agent.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfDHCPRelayTxPkts		1.3.6.1.4.1.6527.3.1.2.3.20.1.2
vRtrIfDHCPRelayTxPkts indicates the total number of packets transmitted by the DHCP relay agent.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfDHCPRelayRxMalformedPkts		1.3.6.1.4.1.6527.3.1.2.3.20.1.3
vRtrIfDHCPRelayRxMalformedPkts indicates the total number of malformed packets received by the DHCP relay agent.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfDHCPRelayRxUntrustedPkts		1.3.6.1.4.1.6527.3.1.2.3.20.1.4
vRtrIfDHCPRelayRxUntrustedPkts indicates the total number of untrusted packets received by the DHCP relay agent.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfDHCPRelayClientPktsDiscarded		1.3.6.1.4.1.6527.3.1.2.3.20.1.5
vRtrIfDHCPRelayClientPktsDiscarded indicates the total number of client packets dicarded by the DHCP relay agent.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfDHCPRelayClientPktsRelayed		1.3.6.1.4.1.6527.3.1.2.3.20.1.6
vRtrIfDHCPRelayClientPktsRelayed indicates the total number of client packets relayed by the DHCP relay agent.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfDHCPRelayServerPktsDiscarded		1.3.6.1.4.1.6527.3.1.2.3.20.1.7
vRtrIfDHCPRelayServerPktsDiscarded indicates the total number of server packets discarded by the DHCP relay agent.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfDHCPRelayServerPktsRelayed		1.3.6.1.4.1.6527.3.1.2.3.20.1.8
vRtrIfDHCPRelayServerPktsRelayed indicates the total number of server packets relayed by the DHCP relay agent.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfDHCPRelayAuthPktsDiscarded		1.3.6.1.4.1.6527.3.1.2.3.20.1.9
vRtrIfDHCPRelayAuthPktsDiscarded indicates the total number of packets discarded because authentication was not successful.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfDHCPRelayAuthPktsSuccess		1.3.6.1.4.1.6527.3.1.2.3.20.1.10
vRtrIfDHCPRelayAuthPktsSuccess indicates the total number of packets for which authentication was successful.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfDHCPRelayClientPktsSnooped		1.3.6.1.4.1.6527.3.1.2.3.20.1.11
vRtrIfDHCPRelayClientPktsSnooped indicates the total number of client packets snooped by the DHCP relay agent.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfDHCPRelayServerPktsSnooped		1.3.6.1.4.1.6527.3.1.2.3.20.1.12
vRtrIfDHCPRelayServerPktsSnooped indicates the total number of server packets snooped by the DHCP relay agent.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfDHCPRelayClientPktsProxRad		1.3.6.1.4.1.6527.3.1.2.3.20.1.13
vRtrIfDHCPRelayClientPktsProxRad indicates the total number of client packets proxied by the DHCP relay agent based on data received from a RADIUS server.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfDHCPRelayClientPktsProxLS		1.3.6.1.4.1.6527.3.1.2.3.20.1.14
vRtrIfDHCPRelayClientPktsProxLS indicates the total number of client packets proxied by the DHCP relay agent based on a lease state. The lease itself can have been obtained from a DHCP or RADIUS server. This is the so called lease split functionality.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfDHCPRelayPktsGenRelease		1.3.6.1.4.1.6527.3.1.2.3.20.1.15
vRtrIfDHCPRelayPktsGenRelease indicates the total number of DHCP RELEASE messages spoofed by the DHCP relay agent to the DHCP server.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfDHCPRelayPktsGenForceRenew		1.3.6.1.4.1.6527.3.1.2.3.20.1.16
vRtrIfDHCPRelayPktsGenForceRenew indicates the total number of DHCP FORCERENEW messages spoofed by the DHCP relay agent to the DHCP clients.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrIfDHCPLeaseStateTable		1.3.6.1.4.1.6527.3.1.2.3.22
vRtrIfDHCPLeaseStateTable contains DHCP lease state info for a virtual router interface in the system. The content of this table is moved to the ALCATEL-IND1-TIMETRA-SERV-MIB::svcDhcpLeaseStateTable.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrIfDHCPLeaseStateEntry

vRtrIfDHCPLeaseStateEntry		1.3.6.1.4.1.6527.3.1.2.3.22.1
DHCP lease state information for a virtual router interface.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	VRtrIfDHCPLeaseStateEntry

vRtrIfDHCPLseStateCiAddr		1.3.6.1.4.1.6527.3.1.2.3.22.1.1
The value of the object vRtrIfDHCPLseStateCiAddr indicates the IP address of the DHCP lease state.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	IpAddress

vRtrIfDHCPLseStateChAddr		1.3.6.1.4.1.6527.3.1.2.3.22.1.2
The value of the object vRtrIfDHCPLseStateChAddr indicates the MAC address of the DHCP lease state.
Status: obsolete	Access: read-only
OBJECT-TYPE
	MacAddress

vRtrIfDHCPLseStateRemainLseTime		1.3.6.1.4.1.6527.3.1.2.3.22.1.3
The value of the object vRtrIfDHCPLseStateRemainLseTime indicates the remaining lease time of the IP address of the DHCP lease state.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrIfDHCPLseStateOption82		1.3.6.1.4.1.6527.3.1.2.3.22.1.4
vRtrIfDHCPLseStateOption82 indicates the content of the Option82 for this DHCP lease state.
Status: obsolete	Access: read-only
OBJECT-TYPE
	OCTET STRING

vRtrIfDHCPLseStatePersistKey		1.3.6.1.4.1.6527.3.1.2.3.22.1.5
The value of the object vRtrIfDHCPLseStatePersistKey indicates a key value that can be used to track this lease state in the persistence file.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrIfDHCP6TableLastChanged		1.3.6.1.4.1.6527.3.1.2.3.35
The value of the object vRtrIfDHCP6TableLastChanged indicates the time of the last change to any row of vRtrIfDHCP6Table
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrIfDHCP6Table		1.3.6.1.4.1.6527.3.1.2.3.36
The vRtrIfDHCP6Table is used to configure the interface parameters for the DHCP6 Relay agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrIfDHCP6Entry

vRtrIfDHCP6Entry		1.3.6.1.4.1.6527.3.1.2.3.36.1
Each row entry represents information related to DHCP6 Relay for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrIfDHCP6Entry

vRtrIfDHCP6LastChanged		1.3.6.1.4.1.6527.3.1.2.3.36.1.1
The value of the object vRtrIfDHCP6LastChanged indicates the time of the last change to this row of VRtrIfDHCP6Entry.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrIfDHCP6AdminState		1.3.6.1.4.1.6527.3.1.2.3.36.1.2
The value of the object vRtrIfDHCP6AdminState specifies the desired administrative status of the DHCP6 relay agent on this interface. The value can only be set to inService if the value of vRtrIfType is serviceIesGroup. The value noop(3) is never allowed.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxAdminState

vRtrIfDHCP6OperState		1.3.6.1.4.1.6527.3.1.2.3.36.1.3
The value of the object vRtrIfDHCP6OperState indicates the current operational state of the DHCP6 relay agent on this interface. Following value are possible: up (1) - the DHCP6 relay agent is running. down (2), - the DHCP6 relay agent is administratively disabled. noIPv6Pfx (3), - the DHCP6 relay agent cannot be operational as no ipv6 prefix is assigned to this link. noServerConfigured(4) - the DHCP6 relay agent cannot be operational as no DHCP6 servers are configured. noValidSourceAddr(5) - the DHCP6 relay agent cannot be operational because a source address has been configured and the address is not local to this node.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2), noIPv6Pfx(3), noServerConfigured(4), noValidSourceAddr(5)

vRtrIfDHCP6Description		1.3.6.1.4.1.6527.3.1.2.3.36.1.4
The value of the object vRtrIfDHCP6Description specifies a user provided description string for DHCP6 relay agent on this virtual router interface. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
Status: current	Access: read-create
OBJECT-TYPE
	TItemDescription

vRtrIfDHCP6RelayServer1		1.3.6.1.4.1.6527.3.1.2.3.36.1.5
The value of the object vRtrIfDHCP6RelayServer1 specifies the first DHCP6 server where the DHCP6 requests will be forwarded to.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv6z

vRtrIfDHCP6RelayServer2		1.3.6.1.4.1.6527.3.1.2.3.36.1.6
The value of the object vRtrIfDHCP6RelayServer2 specifies the 2nd DHCP6 server where the DHCP6 requests will be forwarded to.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv6z

vRtrIfDHCP6RelayServer3		1.3.6.1.4.1.6527.3.1.2.3.36.1.7
The value of the object vRtrIfDHCP6RelayServer3 specifies the 3rd DHCP6 server where the DHCP6 requests will be forwarded to.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv6z

vRtrIfDHCP6RelayServer4		1.3.6.1.4.1.6527.3.1.2.3.36.1.8
The value of the object vRtrIfDHCP6RelayServer4 specifies the 4rd DHCP6 server where the DHCP6 requests will be forwarded to.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv6z

vRtrIfDHCP6RelayServer5		1.3.6.1.4.1.6527.3.1.2.3.36.1.9
The value of the object vRtrIfDHCP6RelayServer5 specifies the 5th DHCP6 server where the DHCP6 requests will be forwarded to.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv6z

vRtrIfDHCP6RelayServer6		1.3.6.1.4.1.6527.3.1.2.3.36.1.10
The value of the object vRtrIfDHCP6RelayServer6 specifies the 6th DHCP6 server where the DHCP6 requests will be forwarded to.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv6z

vRtrIfDHCP6RelayServer7		1.3.6.1.4.1.6527.3.1.2.3.36.1.11
The value of the object vRtrIfDHCP6RelayServer7 specifies the 7th DHCP6 server where the DHCP6 requests will be forwarded to.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv6z

vRtrIfDHCP6RelayServer8		1.3.6.1.4.1.6527.3.1.2.3.36.1.12
The value of the object vRtrIfDHCP6RelayServer8 specifies the 8th DHCP6 server where the DHCP6 requests will be forwarded to.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv6z

vRtrIfDHCP6RelayItfIdOption		1.3.6.1.4.1.6527.3.1.2.3.36.1.13
The value of the object vRtrIfDHCP6RelayItfIdOption specifies whether or not the interface-id option is added by the DHCP6 relay agent, and, if it is present, what information goes in it. If the value of this object is set to 'none', the option is not added by the relay agent. In all other cases the option is added to the relay message. The content of the option is defined as follows: - 'ifIndex' - the value of the interface index is used. - 'asciiTuple' - the ASCII-encoded concatenated tuple consisting of the - access-node-identifier - service-id - interface-name - SAP-id (only if the value of vRtrIfType is 'serviceIesGroup') - 'sapId' - the ASCII-encoded SAP-id is used. - 'string' - the value of the object vRtrIfDHCP6ItfIdString is used.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	none(0), ifIndex(1), asciiTuple(2), sapId(3), string(4)

vRtrIfDHCP6LeasePopulate		1.3.6.1.4.1.6527.3.1.2.3.36.1.14
The value of the object vRtrIfDHCP6LeasePopulate specifies the maximum number of lease states allocated by the DHCP6 relay function, allowed on this interface.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..8000

vRtrIfDHCP6CurrLeasePopulate		1.3.6.1.4.1.6527.3.1.2.3.36.1.15
The value of the object vRtrIfDHCP6CurrLeasePopulate indicates the number of lease states currently allocated on this interface by the DHCP6 relay function.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..8000

vRtrIfDHCP6SourceAddress		1.3.6.1.4.1.6527.3.1.2.3.36.1.16
The value of the object vRtrIfDHCP6SourceAddress specifies the ipv6 address that will be used by the DHCP6 relay agent as source IP address in all messages sent to the DHCP6 servers. If set to ::, the system will use the IPv6 address assigned on the link on which the relay message is sent out, if such an address is defined. As a last resort the system Ipv6 address is taken.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv6

vRtrIfDHCP6EnableNgbrResolution		1.3.6.1.4.1.6527.3.1.2.3.36.1.17
The value of the object vRtrIfDHCP6EnableNgbrResolution specifies whether or not neighbor resolution via DHCP6 Relay must be enabled on this interface. This feature is similar to the arp-populate feature in ipv4.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrIfDHCP6RemoteIdOption		1.3.6.1.4.1.6527.3.1.2.3.36.1.18
The value of the object vRtrIfDHCP6RemoteIdOption specifies whether or not the remote Id option is sent to the DHCP6 server. The client DUID is used as remoteId.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrIfDHCP6PfxdAdminState		1.3.6.1.4.1.6527.3.1.2.3.36.1.19
The value of the object vRtrIfDHCP6PfxdAdminState specifies the administrative state of the row. If set to enabled, this IPv6 prefix will be delegated by the system.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

vRtrIfDHCP6ServerMaxLeaseStates		1.3.6.1.4.1.6527.3.1.2.3.36.1.20
The value of the object vRtrIfDHCP6ServerMaxLeaseStates specifies the maximum number of lease states installed by the DHCP6 server function allowed on this interface.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..8000

vRtrIfDHCP6CurrServerLeaseStates		1.3.6.1.4.1.6527.3.1.2.3.36.1.21
The value of the object vRtrIfDHCP6CurrServerLeaseStates indicates the number of lease states currently allocated on this interface by the DHCP6 server function.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..8000

vRtrIfDHCP6ItfIdString		1.3.6.1.4.1.6527.3.1.2.3.36.1.22
The value of the object vRtrIfDHCP6ItfIdString specifies the string that will be put in the interface-id option added by the relay agent. This value is only meaningful if the object vRtrIfDHCP6RelayItfIdOption is set to string(4).
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..80)

vRtrIfNameTable		1.3.6.1.4.1.6527.3.1.2.3.5
This is a read-only table, each row of which represents a one to one equivalence between a router interface name (vRtrIfName) and its corresponding index in the vRtrIfTable (vRtrIfIndex).
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrIfNameEntry

vRtrIfNameEntry		1.3.6.1.4.1.6527.3.1.2.3.5.1
Each row entry in the vRtrIfNameTable corresponds to a row in the vRtrIfTable. When an entry is created or deleted in the vRtrIfTable, a corresponding entry is created or deleted in this table.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrIfNameEntry

vRtrIfNameIndex		1.3.6.1.4.1.6527.3.1.2.3.5.1.1
The value of vRtrIfNameIndex gives the value of vRtrIfIndex for a row in the vRtrIfTable. This row corresponds to the virtual router interface which has interface name as vRtrIfName. Every vRtrIfName is unique within a specific instance of vRtrID.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndex

vRtrIpAddrTable		1.3.6.1.4.1.6527.3.1.2.3.6
The vRtrIpAddrTable has an entry for each IP address configured for a virtual router in the system. An interface on the virtual router may have more than one IP address assigned to it.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrIpAddrEntry

vRtrIpAddrEntry		1.3.6.1.4.1.6527.3.1.2.3.6.1
Each row entry represents an IP address assigned a virtual router interface. Entries can be created and deleted via SNMP SET operations. Setting RowStatus to 'active' requires a values for all column variables to have been assigned.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrIpAddrEntry

vRiaIndex		1.3.6.1.4.1.6527.3.1.2.3.6.1.1
The unique value which identifies this IP address entry for this interface of this virtual router in the Tmnx system. Those row entries with vRiaIndex = 1 represent the primary IP address for the interface identified by the vRtrID and vRtrIfIndex pair. Row entries with other values for vRiaIndex are secondary IP addresses. There must always be a primary IP address assigned an interface. This implies that if the primary address row is deleted, the secondary rows are also deleted.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..16

vRiaRowStatus		1.3.6.1.4.1.6527.3.1.2.3.6.1.2
The row status used for creation, deletion, or control of vRtrIpAddrTable entries. All the other row variables must have been assigned values before the row can be place into the 'active' state.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

vRiaIpAddress		1.3.6.1.4.1.6527.3.1.2.3.6.1.3
The IP address assigned to a router's interface.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

vRiaNetMask		1.3.6.1.4.1.6527.3.1.2.3.6.1.4
The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the host bits set to 0.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

vRiaBcastAddrFormat		1.3.6.1.4.1.6527.3.1.2.3.6.1.5
When vRiaBcastAddrFormat is set to 'allOnes', the 255.255.255.255 address is used for local broadcast. When vRiaBcastAddrFormat is set to 'hostOnes', the -1 address is used for the local broadcast. For example for subnet 10.10.16.0/20 the -1 address is 10.10.31.255.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	allOnes(1), hostOnes(2)

vRiaReasmMaxSize		1.3.6.1.4.1.6527.3.1.2.3.6.1.6
The size of the largest IP datagram which this entry can reassemble from incoming IP fragmented datagrams received on this interface.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..65535

vRiaIgpInhibit		1.3.6.1.4.1.6527.3.1.2.3.6.1.7
This variable should only be associated with secondary ip addresses, i.e., when the value of vRiaIndex is other than 1. When vRiaIgpInhibit has a value of 'true', it indicates that the given secondary IP address should not be recognized as a local interface by the running IGP. For OSPF and IS-IS, this means that the given secondary IP addresses will not be injected as passive interfaces and will not be advertised as internal IP interfaces into the IGP's link state database. For RIP this means these secondary IP interfaces will not source RIP updates.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRiaInetAddressType		1.3.6.1.4.1.6527.3.1.2.3.6.1.8
vRiaInetAddressType specifies the type of the vRiaInetAddress address assigned to a router's interface.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressType

vRiaInetAddress		1.3.6.1.4.1.6527.3.1.2.3.6.1.9
The type of this address is determined by the value of the vRiaInetAddressType object. vRiaInetAddress indicates the IPv4/IPv6 address assigned to a router's interface.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddress	Size(0|4|16)

vRiaInetPrefixLen		1.3.6.1.4.1.6527.3.1.2.3.6.1.10
The value of vRiaInetPrefixLen specifies the length of the IP netmask for this interface address.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressPrefixLength

vRiaInetAddrState		1.3.6.1.4.1.6527.3.1.2.3.6.1.11
The value of vRiaInetAddrState indicates the address state of the IPv6 address of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxInetAddrState

vRiaInetEui64		1.3.6.1.4.1.6527.3.1.2.3.6.1.12
The value of vRiaInetEui64 specifies whether the vRiaInetOperAddress is an eui64 address. This object can only be set at creation time. When vRiaInetEui64 is 'true', then the vRiaInetOperAddress is derived from the vRiaInetAddress and the physical address of the interface this address is attached to. vRiaInetAddress has to have all zeros the least significant 8 bytes. Also, vRiaInetPrefixLen cannot be longer than 64. When vRiaInetEui64 is 'false', then the vRiaInetOperAddress is a copy of vRiaInetAddress. The value is always 'false' when vRiaInetAddressType is not 'ipv6'.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRiaInetOperAddress		1.3.6.1.4.1.6527.3.1.2.3.6.1.13
The value of vRiaInetOperAddress indicates the operational address of this entry. The type of this address is determined by the value of the vRiaInetAddressType object.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress

vRiaInetGwAddressType		1.3.6.1.4.1.6527.3.1.2.3.6.1.14
The value of vRiaInetGwAddressType specifies the address type of vRiaInetGwAddress.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressType

vRiaInetGwAddress		1.3.6.1.4.1.6527.3.1.2.3.6.1.15
The value of vRiaInetGwAddress specifies the gateway address for the subnet specified by vRiaInetAddress and vRiaInetPrefixLen. The address type is defined by vRiaInetGwAddressType. This field is only valid when the address is configured on a subscriber interface.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddress	Size(0|4|16)

vRiaInetRemoteIpType		1.3.6.1.4.1.6527.3.1.2.3.6.1.16
The value of vRiaInetRemoteIpType specifies the address type of vRiaInetRemoteIp.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressType

vRiaInetRemoteIp		1.3.6.1.4.1.6527.3.1.2.3.6.1.17
The value of vRiaInetRemoteIp specifies the IP address of the remote redundant interface. This field is only valid when the address is configured on a redundant interface.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddress	Size(0|4|16)

vRtrIpCidrRouteTable		1.3.6.1.4.1.6527.3.1.2.3.7
The vRtrIpCidrRouteTable provides an extension of the ipCidrRouteTable in the IP-FORWARD-MIB.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrIpCidrRouteEntry

vRtrIpCidrRouteEntry		1.3.6.1.4.1.6527.3.1.2.3.7.1
Each row entry in the vRtrIpCidrRouteTable represents additional columns for attributes specific to the Alcatel 7x50 SR series implementation for the IP route table.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrIpCidrRouteEntry

vRtrIpCidrRouteLastEnabledTime		1.3.6.1.4.1.6527.3.1.2.3.7.1.1
The vRtrIpCidrRouteLastEnabledTime variable contains the sysUpTime value when ipCidrRouteStatus was last set to active (1) to allow IP forwarding on this route entry.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrIpCidrRoutePreference		1.3.6.1.4.1.6527.3.1.2.3.7.1.2
When ipCidrRouteProto has a value of 'netmgmt' to indicate that this entry is a static route, the value of vRtrIpCidrRoutePreference determines the priority of this static route versus the routes from different sources such as BGP or OSPF etc. Different protocols should not be configured with the same preference, if this occurs the tiebreaker is determined per the default preference value as defined in the table below. If multiple routes are learned with an identical preference using the same protocol, the lowest cost is used. If multiple routes are learned with an identical preference using the same protocol and the costs (metrics) are equal, then the decision as to what route to use is determined by the configuration of the ecmp command. Default preferences: Route Type Preference Configurable ---------- ---------- ------------ Direct attached 0 no Static-route 5 yes MPLS (post FCS) 7 OSPF Internal routes 10 no OSPF External 150 yes BGP 170 yes
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..255

vRtrIpCidrRouteMetric		1.3.6.1.4.1.6527.3.1.2.3.7.1.3
The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrStaticRouteNumber		1.3.6.1.4.1.6527.3.1.2.3.8
The number of current vRtrStaticRouteTable entries that are 'active'.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrStaticRouteTable		1.3.6.1.4.1.6527.3.1.2.3.9
This entity's Static Routing table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrStaticRouteEntry

vRtrStaticRouteEntry		1.3.6.1.4.1.6527.3.1.2.3.9.1
A particular route to a particular destination, through a particular next hop.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrStaticRouteEntry

vRtrStaticRouteDest		1.3.6.1.4.1.6527.3.1.2.3.9.1.1
The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrStaticRouteMask object is not equal to x.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

vRtrStaticRouteMask		1.3.6.1.4.1.6527.3.1.2.3.9.1.2
Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the vRtrStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the vRtrStaticRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrStaticRouteDest object is not equal to vRtrStaticRouteDest.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

vRtrStaticRouteIndex		1.3.6.1.4.1.6527.3.1.2.3.9.1.3
The quaternary index for the vRtrStaticRouteTable.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

vRtrStaticRouteRowStatus		1.3.6.1.4.1.6527.3.1.2.3.9.1.4
The row status variable, used according to row installation and removal conventions.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

vRtrStaticRouteLastEnabledTime		1.3.6.1.4.1.6527.3.1.2.3.9.1.5
The vRtrStaticRouteLastEnabledTime variable contains the sysUpTime value when vRtrStaticRouteStatus was last set to active (1) to allow IP forwarding on this static route entry.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrStaticRouteStatus		1.3.6.1.4.1.6527.3.1.2.3.9.1.6
The value of vRtrStaticRouteStatus indicates whether or not this route entry is active in the system. When an interface transitions to the down state, any associated route entries are marked as 'inactive' and are usually not displayed in a standard route table listing. When the interface transitions to the up state, the agent marks the associated routes as 'active'
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), inactive(2)

vRtrStaticRouteStaticType		1.3.6.1.4.1.6527.3.1.2.3.9.1.7
The value of vRtrStaticRouteStaticType indicates the type of static route represented by this row entry.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	unknown(0), nextHop(1), indirect(2), blackHole(3)

vRtrStaticRoutePreference		1.3.6.1.4.1.6527.3.1.2.3.9.1.8
The value of vRtrStaticRoutePreference determines the priority of this static route versus the routes from different sources such as BGP or OSPF etc. Different protocols should not be configured with the same preference, if this occurs the tiebreaker is determined per the default preference value as defined in the table below. If multiple routes are learned with an identical preference using the same protocol, the lowest cost is used. If multiple routes are learned with an identical preference using the same protocol and the costs (metrics) are equal, then the decision as to what route to use is determined by the configuration of the ecmp command. Default preferences. Route Type Preference Configurable ---------- ---------- ------------ Direct attached 0 no Static-route 5 yes MPLS (post FCS) 7 OSPF Internal routes 10 no OSPF External 150 yes BGP 170 yes
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..256

vRtrStaticRouteMetric		1.3.6.1.4.1.6527.3.1.2.3.9.1.9
When ipCidrRouteProto has a value of 'netmgmt' to indicate that this entry is a static route, the value of vRtrStaticRouteMetric associates a metric value with the route. This value is used when importing this static route into other protocols such as OSPF. When the metric is configured as zero then the metric configured in OSPF, default-import-metric, applies. This value is also used to determine which static route to install in the forwarding table: If there are multiple static routes with the same preference but unequal metric then the lower cost (metric) route will be installed. If there are multiple static routes with equal preference and metrics then ecmp rules apply. If there are multiple routes with unequal preference then the lower preference route will be installed.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..65535

vRtrStaticRouteEgressIfIndex		1.3.6.1.4.1.6527.3.1.2.3.9.1.11
The outgoing ifIndex for this route as computed by the static-route module. This variable will have a value of 0 if vRtrStaticRouteStatus is 'inactive' or if this static route is configured as a black hole.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndexOrZero

vRtrStaticRouteNextHop		1.3.6.1.4.1.6527.3.1.2.3.9.1.12
In case of remote routes, the address of the next system en route. This member is complemented by vRtrStaticRouteNextHopUnnumberedIf. Atmost only one of them can be non-null. If vRtrStaticRouteNextHop is '0.0.0.0' and vRtrStaticRouteNextHopUnnumberedIf is a null string then this static route is configured as a black hole.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

vRtrStaticRouteNextHopUnnumberedIf		1.3.6.1.4.1.6527.3.1.2.3.9.1.13
The name of the unnumbered Interface which will be the nexthop for this route. This member is complemented by vRtrStaticRouteNextHop. Atmost only one of them can be non-null. If vRtrStaticRouteNextHop is '0.0.0.0' and vRtrStaticRouteNextHopUnnumberedIf is a null string then this static route is configured as a black hole.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..32)

vRtrStaticRouteAdminState		1.3.6.1.4.1.6527.3.1.2.3.9.1.14
The desired administrative state for this virtual router static route
Status: current	Access: read-create
OBJECT-TYPE
	TmnxAdminState

vRtrStaticRouteIgpShortcut		1.3.6.1.4.1.6527.3.1.2.3.9.1.15
The value of vRtrStaticRouteIgpShortcut is valid only for indirect static routes (i.e. vRtrStaticRouteStaticType is 'indirect'). The bits of vRtrStaticRouteIgpShortcut identify Layer 2 tunneling mechanisms used for IGP shortcuts. If a bit is set, IGP shortcuts associated with that tunneling mechanism will be used to resolve next-hop for the static-route. If no bits are set, IGP shortcuts will not be used to resolve next-hop for the static routes. The tunneling mechanisms represented by each bit are: te(0) - RSVP Traffic Engineering ldp(1) - LDP /32 Route Forwarding Equivalence Class (FEC) ip(2) - IP (IP-in-IP or GRE) Evaluation of tunnel preference is based on the following order, in descending priority: 1. Traffic Engineered Shortcut (RSVP-TE) 2. LDP /32 Route FEC Shortcut 3. IP Shortcut (IP-in-IP or GRE) 4. Actual IGP Next-Hop.
Status: current	Access: read-create
OBJECT-TYPE
	BITS	te(0), ldp(1), ip(2)

vRtrStaticRouteDisallowIgp		1.3.6.1.4.1.6527.3.1.2.3.9.1.16
The value of vRtrStaticRouteDisallowIgp is valid only for indirect static routes (i.e. vRtrStaticRouteStaticType is 'indirect'). If the value of vRtrStaticRouteDisallowIgp is set to 'true', and if none of the defined tunneling mechanisms (RSVP-TE, LDP or IP) qualify as a next-hop, the normal IGP next-hop to the indirect next-hop address will not be used. If the value is set to 'false', IGP next-hop to the indirect next-hop address can be used as the next-hop of the last resort.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrStaticRouteTag		1.3.6.1.4.1.6527.3.1.2.3.9.1.17
The value of vRtrStaticRouteTag is used to add a 32-bit integer tag to the static route. This tag could then be used in route policies to control distribution of the route into other protocols. A value of 0 indicates that the tag has not been set.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..4294967295

vRtrSvcIpRangeTable		1.3.6.1.4.1.6527.3.1.2.3.10
The vRtrSvcIpRangeTable has an entry for each IP address range configured for a virtual interface in a virtual router in the system. An interface on the virtual router may have more than one Service IP address ranges assigned to it.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrSvcIpRangeEntry

vRtrSvcIpRangeEntry		1.3.6.1.4.1.6527.3.1.2.3.10.1
Each row entry represents an IP address range assigned a virtual router service interface. Entries can be created and deleted via SNMP SET operations. Setting RowStatus to 'active' requires values for all column variables to have been assigned.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrSvcIpRangeEntry

vRtrSvcIpRangeAddress		1.3.6.1.4.1.6527.3.1.2.3.10.1.1
The IP address prefix range assigned to a router's service interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	IpAddress

vRtrSvcIpRangeMask		1.3.6.1.4.1.6527.3.1.2.3.10.1.2
The subnet mask associated with the Service IP address of this entry. The value of the mask is an 32-bit integer with all the network bits set to 1 and all the host bits set to 0.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	0..32

vRtrSvcIpRangeRowStatus		1.3.6.1.4.1.6527.3.1.2.3.10.1.3
The row status used for creation, deletion, or control of vRtrSvcIpRangeTable entries.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

vRtrSvcIpRangeExclusive		1.3.6.1.4.1.6527.3.1.2.3.10.1.4
When vRtrSvcIpRangeExclusive has a value of 'true', this set of addresses is reserved for services only and cannot be assigned to network ports. When it has a value of 'false', it could be used for services as well as network ports.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrIpNetToMediaTable		1.3.6.1.4.1.6527.3.1.2.3.11
The vRtrIpNetToMediaTable provides an extension of the ipNetToMediaTable in the IP-MIB.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrIpNetToMediaEntry

vRtrIpNetToMediaEntry		1.3.6.1.4.1.6527.3.1.2.3.11.1
Each row entry in the vRtrIpNetToMediaTable represents additional columns for attributes specific to the Alcatel 7x50 SR series implementation for the vRtrIpNetToMediaTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrIpNetToMediaEntry

vRtrIpNetToMediaTimer		1.3.6.1.4.1.6527.3.1.2.3.11.1.1
The value of vRtrIpNetToMediaTimer determines how much longer an ARP entry associated with an vRtrIpNetToMediaTable entry remains in the ARP cache. It is initially set to vRtrIfArpTimeout. When vRtrIpNetToMediaTimer has a value of zero, '0', the entry is cleared from the cache.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..65535

vRtrIpNetToMediaOperState		1.3.6.1.4.1.6527.3.1.2.3.11.1.2
The value of vRtrIpNetToMediaOperState specifies if the ARP entry is being used actively in the ARP Table. When ipNetToMediaType has a value 'dynamic', vRtrIpNetToMediaOperState will never have a value of 'outOfService'.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxOperState

vRtrInstanceAggregationTableLastChanged		1.3.6.1.4.1.6527.3.1.2.3.12
Timestamp of the last change to the vRtrInstanceAggregationTable either from adding a row or removing a row.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrInstanceAggregationTable		1.3.6.1.4.1.6527.3.1.2.3.13
The vRtrInstanceAggregationTable is the list of configured VRtr aggregations and their operational status information. Specifies the route aggregates that should be generated into the virtual router if at least one contributing route (more specific) is learned. A route could match multiple aggregate statements. For instance, with the following entries: aggregate 10.0.0.0/8 aggregate 10.1.0.0/16 If the route 10.1.1.0/24 is learned, both aggregates would be generated.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrInstanceAggregationEntry

vRtrInstanceAggregationEntry		1.3.6.1.4.1.6527.3.1.2.3.13.1
An entry (conceptual row) in the vRtrInstanceAggregationTable. Entries are created by user. Entries are destroyed by user.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrInstanceAggregationEntry

vRtrAggregationIpPrefix		1.3.6.1.4.1.6527.3.1.2.3.13.1.1
IP address prefix to match for the aggregation.
Status: current	Access: not-accessible
OBJECT-TYPE
	IpAddress

vRtrAggregationIpPrefixMask		1.3.6.1.4.1.6527.3.1.2.3.13.1.2
Mask length for vRtrAggregationIpPrefix, to match for the aggregation.
Status: current	Access: not-accessible
OBJECT-TYPE
	IpAddressPrefixLength

vRtrAggregationRowStatus		1.3.6.1.4.1.6527.3.1.2.3.13.1.3
Row status for this entry.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

vRtrAggregationLastChanged		1.3.6.1.4.1.6527.3.1.2.3.13.1.4
Time stamp of last change of any object for this entry.
Status: current	Access: read-create
OBJECT-TYPE
	TimeStamp

vRtrAggregationSummaryOnly		1.3.6.1.4.1.6527.3.1.2.3.13.1.5
When true(1), only the aggregate is advertised, the more specfic routes that make up the aggregate are not. When false(2), both the aggregate and more specific components are advertised.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrAggregationASSet		1.3.6.1.4.1.6527.3.1.2.3.13.1.6
When true(1), the AS-Path of the resulting aggregate will contain an AS-SET containing all AS numbers from the contributing routes. When false(2), the AS-Path will contain no AS-SET and will be originated by the ESR.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrAggregationAggregatorAS		1.3.6.1.4.1.6527.3.1.2.3.13.1.7
When vRtrAggregationAggregatorAS is set to non zero, and vRtrAggregationAggregatorIPAddr is set to non-zero, the supplied ASN and IP address will be used for the aggregator path attributes. When omitted, automatically uses its own ASN & Router-ID.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxBgpAutonomousSystem

vRtrAggregationAggregatorIPAddr		1.3.6.1.4.1.6527.3.1.2.3.13.1.8
When vRtrAggregationAggregatorAS is set to non zero, and vRtrAggregationAggregatorIPAddr is set to non-zero, the supplied ASN and IP address will be used for the aggregator path attributes. When omitted, automatically uses its own ASN & Router-ID.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

vRtrAggregationOperState		1.3.6.1.4.1.6527.3.1.2.3.13.1.9
vRtrAggregationOperState specifies the current operational status of the aggregation entry.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxOperState

vRtrStaticRouteIndexTable		1.3.6.1.4.1.6527.3.1.2.3.14
This entity's Static Route Index Table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrStaticRouteIndexEntry

vRtrStaticRouteIndexEntry		1.3.6.1.4.1.6527.3.1.2.3.14.1
The available index for the vRtrStaticRouteTable for every destination per virtual router.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrStaticRouteIndexEntry

vRtrStaticRouteIndexDest		1.3.6.1.4.1.6527.3.1.2.3.14.1.1
The destination IP address of this index entry. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrStaticRouteMask object is not equal to x.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

vRtrStaticRouteIndexMask		1.3.6.1.4.1.6527.3.1.2.3.14.1.2
Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the vRtrStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the vRtrStaticRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrStaticRouteDest object is not equal to vRtrStaticRouteDest.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

vRtrStaticRouteAvailableIndex		1.3.6.1.4.1.6527.3.1.2.3.14.1.3
The available quaternary index for the vRtrStaticRouteTable.
Status: current	Access: read-only
OBJECT-TYPE
	TestAndIncr	1..2147483647

vRtrTunnelTable		1.3.6.1.4.1.6527.3.1.2.3.17
vRtrTunnelTable maintains a list of tunnels for the specific router instance.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrTunnelEntry

vRtrTunnelEntry		1.3.6.1.4.1.6527.3.1.2.3.17.1
vRtrTunnelEntry defines a tunnel to a particular destination in a specific router context. A tunnel to a specific destination could established using GRE, LDP, RSVP or could be a static LSP.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrTunnelEntry

vRtrTunnelDest		1.3.6.1.4.1.6527.3.1.2.3.17.1.1
vRtrTunnelDest maintains the destination IP address of this tunnel. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrTunnelMask object is not equal to x.
Status: current	Access: not-accessible
OBJECT-TYPE
	IpAddress

vRtrTunnelMask		1.3.6.1.4.1.6527.3.1.2.3.17.1.2
vRtrTunnelMask indicates the mask to be logical-ANDed with the destination address before being compared to the value in the vRtrTunnelDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the vRtrTunnelMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the ipCidrRouteDest object is not equal to ipCidrRouteDest.
Status: current	Access: not-accessible
OBJECT-TYPE
	IpAddress

vRtrTunnelPreference		1.3.6.1.4.1.6527.3.1.2.3.17.1.3
The value of vRtrTunnelPreference determines the priority of this tunnel versus the other tunnels from different sources such as LDP, RSVP, GRE etc. This is an absolute number used internally by the system to specify preferences for the tunnel. Lowest number signifies the most preferred entry in the table.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..255

vRtrTunnelType		1.3.6.1.4.1.6527.3.1.2.3.17.1.4
The type of this tunnel entity.
Status: current	Access: not-accessible
OBJECT-TYPE
	TmnxTunnelType

vRtrTunnelID		1.3.6.1.4.1.6527.3.1.2.3.17.1.5
Additional index provided to distinguish between multiple tunnels to same destination having same characteristics. There could be multiple tunnels for the type 'sdp'. In such cases the vRtrTunnelID will hold the SDP Id. There could be multiple tunnels for the type 'ldp'. In such cases the vRtrTunnelID will hold the LSPId of the LSP in use. For other vRtrTunnelType values this field will always be 0 as only a single tunnel is established using other tunnel types.
Status: current	Access: not-accessible
OBJECT-TYPE
	TmnxTunnelID

vRtrTunnelNexthop		1.3.6.1.4.1.6527.3.1.2.3.17.1.6
The address of the next system en route; Otherwise, 0.0.0.0.
Status: current	Access: not-accessible
OBJECT-TYPE
	IpAddress

vRtrTunnelMetric		1.3.6.1.4.1.6527.3.1.2.3.17.1.7
vRtrTunnelMetric maintains the metric of the tunnel. This is used in addition to the preference for this tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vRtrTunnelAge		1.3.6.1.4.1.6527.3.1.2.3.17.1.8
The number of seconds since this tunnel entry was last updated or otherwise determined to be correct. No semantics of `too old' can be implied except through knowledge of owner of the tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

vRtrAdvPrefixTable		1.3.6.1.4.1.6527.3.1.2.3.23
This table allows the user to configure IPv6 prefixes for router advertisements on an interface
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrAdvPrefixEntry

vRtrAdvPrefixEntry		1.3.6.1.4.1.6527.3.1.2.3.23.1
An entry in the vRtrAdvPrefixTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrAdvPrefixEntry

vRtrAdvPrefixIfIndex		1.3.6.1.4.1.6527.3.1.2.3.23.1.1
The index value which uniquely identifies the interface on which this prefix is configured. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	InterfaceIndex

vRtrAdvPrefixPrefix		1.3.6.1.4.1.6527.3.1.2.3.23.1.2
The ipv6 address prefix. The length of this object is the standard length (16 bytes ) for IPv6 prefixes.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddress	Size(16)

vRtrAdvPrefixLength		1.3.6.1.4.1.6527.3.1.2.3.23.1.3
The prefix length associated with this prefix. The value 0 has no special meaning for this object.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressPrefixLength	4..127

vRtrAdvPrefixRowStatus		1.3.6.1.4.1.6527.3.1.2.3.23.1.4
The row status used for creation and deletion of router advertisement prefix entries.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

vRtrAdvPrefixOnLinkFlag		1.3.6.1.4.1.6527.3.1.2.3.23.1.5
This object has the value 'true(1)', if this prefix can be used for on-link determination and the value 'false(2)' otherwise.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrAdvPrefixAutonomousFlag		1.3.6.1.4.1.6527.3.1.2.3.23.1.6
Autonomous address configuration flag. When true(1), indicates that this prefix can be used for autonomous address configuration (i.e. can be used to form a local interface address). If false(2), it is not used to auto- configure a local interface address.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrAdvPrefixPreferredLifetime		1.3.6.1.4.1.6527.3.1.2.3.23.1.7
The remaining length of time in seconds that this prefix will continue to be preferred, i.e. time until deprecation. A value of 4,294,967,295 represents infinity. The address generated from a deprecated prefix should no longer be used as a source address in new communications, but packets received on such an interface are processed as expected.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

vRtrAdvPrefixValidLifetime		1.3.6.1.4.1.6527.3.1.2.3.23.1.8
The remaining length of time, in seconds, that this prefix will continue to be valid, i.e. time until invalidation. A value of 4,294,967,295 represents infinity. The address generated from an invalidated prefix should not appear as the destination or source address of a packet.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

vRtrInetStaticRouteTable		1.3.6.1.4.1.6527.3.1.2.3.24
The table of addressing information relevant to this entity's Static Routing table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrInetStaticRouteEntry

vRtrInetStaticRouteEntry		1.3.6.1.4.1.6527.3.1.2.3.24.1
A particular route to a particular destination, through a particular next hop.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrInetStaticRouteEntry

vRtrInetStaticRouteDestType		1.3.6.1.4.1.6527.3.1.2.3.24.1.1
The value of vRtrInetStaticRouteDestType indicates the address type of vRtrInetStaticRouteDest address.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressType

vRtrInetStaticRouteDest		1.3.6.1.4.1.6527.3.1.2.3.24.1.2
The value of vRtrInetStaticRouteDest indicates the destination IP address of this static route.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddress

vRtrInetStaticRouteDestPfxLen		1.3.6.1.4.1.6527.3.1.2.3.24.1.3
The value of vRtrInetStaticRouteDestPfxLen indicates the prefix length associated with the vRtrInetStaticRouteDest address.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressPrefixLength

vRtrInetStaticRouteIndex		1.3.6.1.4.1.6527.3.1.2.3.24.1.4
The value of vRtrInetStaticRouteIndex indicates the fifth index for the vRtrInetStaticRouteTable. The fifth index to vRtrInetStaticRouteTable identifies a specific next-hop route to distinguish it from other routes that share the same destination address.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..2147483647

vRtrInetStaticRouteRowStatus		1.3.6.1.4.1.6527.3.1.2.3.24.1.5
vRtrInetStaticRouteRowStatus controls the creation and deletion of rows in the table.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

vRtrInetStaticRouteLastEnabledTime		1.3.6.1.4.1.6527.3.1.2.3.24.1.6
The value of vRtrInetStaticRouteLastEnabledTime indicates the sysUpTime value when vRtrInetStaticRouteStatus was last set to active (1) to allow IP forwarding on this static route entry.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrInetStaticRouteStatus		1.3.6.1.4.1.6527.3.1.2.3.24.1.7
The value of vRtrInetStaticRouteStatus indicates whether or not this route entry is active in the system. When an interface transitions to the down state, any associated route entries are marked as 'inactive' and are usually not displayed in a standard route table listing. When the interface transitions to the up state, the agent marks the associated routes as 'active'
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), inactive(2)

vRtrInetStaticRouteStaticType		1.3.6.1.4.1.6527.3.1.2.3.24.1.8
The value of vRtrInetStaticRouteStaticType specifies the type of static route represented by this row entry.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	unknown(0), nextHop(1), indirect(2), blackHole(3)

vRtrInetStaticRoutePreference		1.3.6.1.4.1.6527.3.1.2.3.24.1.9
The value of vRtrInetStaticRoutePreference specifies the priority of this static route versus the routes from different sources such as BGP or OSPF etc. Different protocols should not be configured with the same preference, if this occurs the tiebreaker is determined per the default preference value as defined in the table below. If multiple routes are learned with an identical preference using the same protocol, the lowest cost is used. If multiple routes are learned with an identical preference using the same protocol and the costs (metrics) are equal, then the decision as to what route to use is determined by the configuration of the ecmp command. Default preferences. Route Type Preference Configurable ---------- ---------- ------------ Direct attached 0 no Static-route 5 yes MPLS (post FCS) 7 OSPF Internal routes 10 no OSPF External 150 yes BGP 170 yes
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..256

vRtrInetStaticRouteMetric		1.3.6.1.4.1.6527.3.1.2.3.24.1.10
The value of vRtrInetStaticRouteMetric specifies the metric for the static route. When ipCidrRouteProto has a value of 'netmgmt' to specify that this entry is a static route, the value of vRtrInetStaticRouteMetric associates a metric value with the route. This value is used when importing this static route into other protocols such as OSPF. When the metric is configured as zero then the metric configured in OSPF, default-import-metric, applies. This value is also used to determine which static route to install in the forwarding table: If there are multiple static routes with the same preference but unequal metric then the lower cost (metric) route will be installed. If there are multiple static routes with equal preference and metrics then ecmp rules apply. If there are multiple routes with unequal preference then the lower preference route will be installed.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..65535

vRtrInetStaticRouteEgressIfIndex		1.3.6.1.4.1.6527.3.1.2.3.24.1.11
The value of vRtrInetStaticRouteEgressIfIndex indicates the outgoing ifIndex for this route as computed by the static-route module. This variable will have a value of 0 if vRtrInetStaticRouteStatus is 'inactive' or if this static route is configured as a black hole.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndexOrZero

vRtrInetStaticRouteNextHopType		1.3.6.1.4.1.6527.3.1.2.3.24.1.12
The value of vRtrInetStaticRouteNextHopType specifies the address type of vRtrInetStaticRouteNextHop address.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressType

vRtrInetStaticRouteNextHop		1.3.6.1.4.1.6527.3.1.2.3.24.1.13
The value of vRtrInetStaticRouteNextHop specifies the address of the next hop for the static route. In case of remote routes, the address of the next system en route. This member is complemented by vRtrInetStaticRouteNextHopIf. At most only one of the two objects: vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf and can be non-null. If vRtrInetStaticRouteNextHopType is 'unknown' and vRtrInetStaticRouteNextHopIf is a null string then this static route is configured as a black hole.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddress	Size(0|4|16|20)

vRtrInetStaticRouteNextHopIf		1.3.6.1.4.1.6527.3.1.2.3.24.1.14
The value of vRtrInetStaticRouteNextHopIf specifies the interface of the next hop for the static route. The name of the Interface which will be the nexthop for this route. This member is complemented by vRtrInetStaticRouteNextHop. At most only one of the two objects: vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf and can be non-null. If vRtrInetStaticRouteNextHopType is 'unknown' and vRtrInetStaticRouteNextHopIf is a null string then this static route is configured as a black hole.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..32)

vRtrInetStaticRouteAdminState		1.3.6.1.4.1.6527.3.1.2.3.24.1.15
The value of vRtrInetStaticRouteAdminState specifies the desired administrative state for this virtual router static route
Status: current	Access: read-create
OBJECT-TYPE
	TmnxAdminState

vRtrInetStaticRouteIgpShortcut		1.3.6.1.4.1.6527.3.1.2.3.24.1.16
The value of vRtrInetStaticRouteIgpShortcut specifies the Layer 2 tunneling mechanism used for IGP shortcuts. The value of vRtrInetStaticRouteIgpShortcut is valid only for indirect static routes (i.e. vRtrInetStaticRouteStaticType is 'indirect'). The bits of vRtrInetStaticRouteIgpShortcut identify Layer 2 tunneling mechanisms used for IGP shortcuts. If a bit is set, IGP shortcuts associated with that tunneling mechanism will be used to resolve next-hop for the static-route. If no bits are set, IGP shortcuts will not be used to resolve next-hop for the static routes. The tunneling mechanisms represented by each bit are: te(0) - RSVP Traffic Engineering ldp(1) - LDP /32 Route Forwarding Equivalence Class (FEC) ip(2) - IP (IP-in-IP or GRE) Evaluation of tunnel preference is based on the following order, in descending priority: 1. Traffic Engineered Shortcut (RSVP-TE) 2. LDP /32 Route FEC Shortcut 3. IP Shortcut (IP-in-IP or GRE) 4. Actual IGP Next-Hop.
Status: current	Access: read-create
OBJECT-TYPE
	BITS	te(0), ldp(1), ip(2)

vRtrInetStaticRouteDisallowIgp		1.3.6.1.4.1.6527.3.1.2.3.24.1.17
The value of vRtrInetStaticRouteDisallowIgp specifies if IGP shortcuts are to be used or not. The value of vRtrInetStaticRouteDisallowIgp is valid only for indirect static routes (i.e. vRtrInetStaticRouteStaticType is 'indirect'). If the value of vRtrInetStaticRouteDisallowIgp is set to 'true', and if none of the defined tunneling mechanisms (RSVP-TE, LDP or IP) qualify as a next-hop, the normal IGP next-hop to the indirect next-hop address will not be used. If the value is set to 'false', IGP next-hop to the indirect next-hop address can be used as the next-hop of the last resort.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrInetStaticRouteTag		1.3.6.1.4.1.6527.3.1.2.3.24.1.18
The value of vRtrInetStaticRouteTag specifies a 32-bit integer tag that is used to add to the static route. This tag could then be used in route policies to control distribution of the route into other protocols. A value of 0 indicates that the tag has not been set.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..4294967295

vRtrInetStaticRouteEnableBfd		1.3.6.1.4.1.6527.3.1.2.3.24.1.19
The value of vRtrInetStaticRouteEnableBfd specifies whether or not Bi-directional Forwarding Detection is enabled on this static route. When the value is 'true', this static-route can establish BFD sessions and use BFD as a signalling mechanism. When it is 'false', it cannot use BFD.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrInetStaticRouteCpeAddrType		1.3.6.1.4.1.6527.3.1.2.3.24.1.20
The value of vRtrInetStaticRouteCpeAddrType specifies the address type of vRtrInetStaticRouteCpeAddr address. When the value of vRtrInetStaticRouteCpeAddrType is not 'unknown', statitistics for the Customer-Provided Equipment (CPE) host checks for this static route entry will be found in the sparsely dependent table extension, vRtrInetStatRteCpeChkStatsTable.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressType

vRtrInetStaticRouteCpeAddr		1.3.6.1.4.1.6527.3.1.2.3.24.1.21
The value of vRtrInetStaticRouteCpeAddr specifies the IP address of the target CPE device. When this object is configured, ICMP pings will be sent to this target IP address to determine CPE connectivity and whether this static route should be active. When the value of vRtrInetStaticRouteCpeAddr is non-empty, statitistics for the CPE host checks for this static route entry will be found in the sparsely dependent table extension, vRtrInetStatRteCpeChkStatsTable.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddress	Size(0|4|16)

vRtrInetStaticRouteCpeInterval		1.3.6.1.4.1.6527.3.1.2.3.24.1.22
The value of vRtrInetStaticRouteCpeInterval specifies the interval, in seconds, between ICMP pings to the target CPE IP address, vRtrInetStaticRouteCpeAddr.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..255

vRtrInetStaticRouteCpeDropCnt		1.3.6.1.4.1.6527.3.1.2.3.24.1.23
The value of vRtrInetStaticRouteCpeDropCnt specifies the number of consecutive ping-replies that must be missed before concluding the CPE is down. If the CPE is determined to be down, the associated static route will be deactivated.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..255

vRtrInetStaticRouteCpeEnableLog		1.3.6.1.4.1.6527.3.1.2.3.24.1.24
The value of vRtrInetStaticRouteCpeEnableLog specifies whether to enable the logging of transitions between active and in-active based on the CPE connectivity check. A value of 'true (1)' indicates that logging should be enabled.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrInetStaticRouteIndexTable		1.3.6.1.4.1.6527.3.1.2.3.25
This entity's Static Route Index Table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrInetStaticRouteIndexEntry

vRtrInetStaticRouteIndexEntry		1.3.6.1.4.1.6527.3.1.2.3.25.1
The available index for the vRtrInetStaticRouteTable for every destination per virtual router.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrInetStaticRouteIndexEntry

vRtrInetStaticRouteAvailIndex		1.3.6.1.4.1.6527.3.1.2.3.25.1.1
The value of vRtrInetStaticRouteAvailIndex indicates the available fifth index for the vRtrInetStaticRouteTable. The fifth index to vRtrInetStaticRouteTable identifies a specific next-hop route to distinguish it from other routes that share the same destination address.
Status: current	Access: read-only
OBJECT-TYPE
	TestAndIncr	1..2147483647

vRtrInetInstAggrTblLastChged		1.3.6.1.4.1.6527.3.1.2.3.26
Timestamp of the last change to the vRtrInetInstAggrTable either from adding a row or removing a row.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrInetInstAggrTable		1.3.6.1.4.1.6527.3.1.2.3.27
The vRtrInetInstAggrTable is the list of configured virtual router aggregations and their operational status information. vRtrInetInstAggrTable specifies the route aggregates that should be generated into the virtual router if at least one contributing route (more specific) is learned. A route could match multiple aggregate statements. For instance, with the following entries: aggregate 10.0.0.0/8 aggregate 10.1.0.0/16 If the route 10.1.1.0/24 is learned, both aggregates would be generated.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrInetInstAggrEntry

vRtrInetInstAggrEntry		1.3.6.1.4.1.6527.3.1.2.3.27.1
vRtrInetInstAggrEntry indicates an entry (conceptual row) in the vRtrInetInstAggrTable. Entries are created and destroyed by user.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrInetInstAggrEntry

vRtrInetAggrIpPrefixType		1.3.6.1.4.1.6527.3.1.2.3.27.1.1
The value of vRtrInetAggrIpPrefixType indicates the IP address type of vRtrInetAggrIpPrefix.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressType

vRtrInetAggrIpPrefix		1.3.6.1.4.1.6527.3.1.2.3.27.1.2
The value of vRtrInetAggrIpPrefixType indicates the IP address prefix to match for the aggregation.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddress

vRtrInetAggrIpPrefixLen		1.3.6.1.4.1.6527.3.1.2.3.27.1.3
The value of vRtrInetAggrIpPrefixLen indicates the prefix length for vRtrInetAggrIpPrefix, to match for the aggregation.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressPrefixLength

vRtrInetAggrRowStatus		1.3.6.1.4.1.6527.3.1.2.3.27.1.4
vRtrInetAggrRowStatus controls the creation and deletion of rows in the table.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

vRtrInetAggrLastChanged		1.3.6.1.4.1.6527.3.1.2.3.27.1.5
The value of vRtrInetAggrLastChanged specifies the time stamp of the last change to this row of vRtrInetInstAggrTable .
Status: current	Access: read-create
OBJECT-TYPE
	TimeStamp

vRtrInetAggrSummaryOnly		1.3.6.1.4.1.6527.3.1.2.3.27.1.6
The value of vRtrInetAggrSummaryOnly specifies if specific routes that make up aggregates are advertised or not. When vRtrInetAggrSummaryOnly has value of 'true(1)', only the aggregate is advertised, the more specfic routes that make up the aggregate are not. When vRtrInetAggrSummaryOnly has value of 'false(2)', both the aggregate and more specific components are advertised.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrInetAggrASSet		1.3.6.1.4.1.6527.3.1.2.3.27.1.7
The value of vRtrInetAggrASSet specifies whether the aggregate route has AS-SET. When vRtrInetAggrASSet has value of 'true(1)', the AS-Path of the resulting aggregate will contain an AS-SET containing all AS numbers from the contributing routes. When vRtrInetAggrASSet has value of 'false(2)', the AS-Path will contain no AS-SET and will be originated by the ESR.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrInetAggrAggregatorAS		1.3.6.1.4.1.6527.3.1.2.3.27.1.8
The value of vRtrInetAggrAggregatorAS specifies the aggregator's ASN. When vRtrInetAggrAggregatorAS is set to non zero, and vRtrInetAggrAggregatorIPAddr is set to non-zero, the supplied ASN and IP address will be used for the aggregator path attributes. When vRtrInetAggrAggregatorAS is not set, the aggregate routes ASN & Router-ID will be used for the aggregator path attributes.
Status: current	Access: read-create
OBJECT-TYPE
	TmnxBgpAutonomousSystem

vRtrInetAggrAggregatorIPAddr		1.3.6.1.4.1.6527.3.1.2.3.27.1.9
The value of vRtrInetAggrAggregatorIPAddr specifies the aggregator's IP address. When vRtrInetAggrAggregatorAS is set to non zero, and vRtrInetAggrAggregatorIPAddr is set to non-zero, the supplied ASN and IP address will be used for the aggregator path attributes. When vRtrInetAggrAggregatorIPAddr is not set, the aggregate routes ASN & Router-ID will be used for the aggregator path attributes.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

vRtrInetAggrOperState		1.3.6.1.4.1.6527.3.1.2.3.27.1.10
The value of vRtrInetAggrOperState specifies the current operational status of the aggregation entry.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxOperState

vRtrInetSvcIpRangeTable		1.3.6.1.4.1.6527.3.1.2.3.28
The vRtrInetSvcIpRangeTable has an entry for each IP address range configured for a virtual interface in a virtual router in the system. An interface on the virtual router may have more than one Service IP address range assigned to it.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrInetSvcIpRangeEntry

vRtrInetSvcIpRangeEntry		1.3.6.1.4.1.6527.3.1.2.3.28.1
Each row entry represents an IP address range assigned a virtual router service interface. Setting RowStatus to 'active' requires values for all column variables to have been assigned.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrInetSvcIpRangeEntry

vRtrInetSvcIpRangeAddrType		1.3.6.1.4.1.6527.3.1.2.3.28.1.1
The value of vRtrInetSvcIpRangeAddrType indicates the IP address type of vRtrInetSvcIpRangeAddr.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressType

vRtrInetSvcIpRangeAddr		1.3.6.1.4.1.6527.3.1.2.3.28.1.2
The value of vRtrInetSvcIpRangeAddr indicates the IP address service range assigned to a router's service interface. The address type of vRtrInetSvcIpRangeAddr is indicated by vRtrInetSvcIpRangeAddrType.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddress

vRtrInetSvcIpRangePfxLen		1.3.6.1.4.1.6527.3.1.2.3.28.1.3
The value of vRtrInetSvcIpRangePfxLen specifies the prefix length to be used with vRtrInetSvcIpRangeAddr for determining the IP address range.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressPrefixLength

vRtrInetSvcIpRangeRowStatus		1.3.6.1.4.1.6527.3.1.2.3.28.1.4
The value of vRtrInetSvcIpRangeRowStatus is used for creation and deletion of IP service prefix ranges.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

vRtrInetSvcIpRangeExclusive		1.3.6.1.4.1.6527.3.1.2.3.28.1.5
The value of vRtrInetSvcIpRangeExclusive specifies how the set of addresses specified by this entry are interpreted. When the value is 'true', they are reserved for services only and cannot be assigned to network ports. When the value is 'false', it could be used for services as well as network ports.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrIfGlobalIndexTable		1.3.6.1.4.1.6527.3.1.2.3.37
This is a read-only table, each row of which represents a one to one equivalence between a unique system wide router interface index (vRtrIfGlobalIndex) and its corresponding virtual router ID (vRtrID) and index in the vRtrIfTable (vRtrIfIndex).
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrIfGlobalIndexEntry

vRtrIfGlobalIndexEntry		1.3.6.1.4.1.6527.3.1.2.3.37.1
Each row entry in the vRtrIfGlobalIndexTable corresponds to a row in the vRtrIfTable. When an entry is created or deleted in the vRtrIfTable, a corresponding entry is created or deleted in this table.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrIfGlobalIndexEntry

vRtrIfGlobalIndexvRtrID		1.3.6.1.4.1.6527.3.1.2.3.37.1.1
The value of vRtrIfGlobalIndexvRtrID indicates the vRtrID that maps to the vRtrIfGlobalIndex. The combination of a vRtrID and a vRtrIfIndex correspond to a system wide unique vRtrIfGlobalIndex. This value represents the specific instance of virtual router which the vRtrIfGlobalIndex belongs to.
Status: current	Access: read-only
OBJECT-TYPE
	TmnxVRtrID

vRtrIfGlobalIndexvRtrIfIndex		1.3.6.1.4.1.6527.3.1.2.3.37.1.2
The value of vRtrIfGlobalIndexvRtrIfIndex gives the value of vRtrIfIndex for a row in the vRtrIfTable. This row corresponds to the virtual router interface that maps to the vRtrIfGlobalIndex. The combination of a vRtrID and a vRtrIfIndex correspond to a system wide unique vRtrIfGlobalIndex.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndex

vRtrIfProxyNDTable		1.3.6.1.4.1.6527.3.1.2.3.38
The vRtrIfProxyNDTable provides an extension to the vRtrIfTable. It has an entry for each virtual router interface configured in the system.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrIfProxyNDEntry

vRtrIfProxyNDEntry		1.3.6.1.4.1.6527.3.1.2.3.38.1
Each row entry represents information related to Proxy Neighbor Discovery for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrIfProxyNDEntry

vRtrIfProxyNDLocal		1.3.6.1.4.1.6527.3.1.2.3.38.1.1
If the value of vRtrIfProxyNDLocal is set to 'true', local proxy Neighbor Discovery is enabled, that is, the interface will reply to Neighbor Solicitation requests when both the hosts are on the same subnet. In this case ICMP redirects will be disabled. If the value of vRtrIfProxyNDLocal is set to 'false', the interface will not reply to Neighbor Solicitation requests if both the hosts are on the same subnet.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

vRtrIfProxyNDPolicy1		1.3.6.1.4.1.6527.3.1.2.3.38.1.2
The value of vRtrIfProxyNDPolicy1 specifies the first proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled.
Status: current	Access: read-create
OBJECT-TYPE
	TPolicyStatementNameOrEmpty

vRtrIfProxyNDPolicy2		1.3.6.1.4.1.6527.3.1.2.3.38.1.3
The value of vRtrIfProxyNDPolicy2 specifies the second proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled.
Status: current	Access: read-create
OBJECT-TYPE
	TPolicyStatementNameOrEmpty

vRtrIfProxyNDPolicy3		1.3.6.1.4.1.6527.3.1.2.3.38.1.4
The value of vRtrIfProxyNDPolicy3 specifies the third proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled.
Status: current	Access: read-create
OBJECT-TYPE
	TPolicyStatementNameOrEmpty

vRtrIfProxyNDPolicy4		1.3.6.1.4.1.6527.3.1.2.3.38.1.5
The value of vRtrIfProxyNDPolicy4 specifies the fourth proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled.
Status: current	Access: read-create
OBJECT-TYPE
	TPolicyStatementNameOrEmpty

vRtrIfProxyNDPolicy5		1.3.6.1.4.1.6527.3.1.2.3.38.1.6
The value of vRtrIfProxyNDPolicy5 specifies the fifth proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled.
Status: current	Access: read-create
OBJECT-TYPE
	TPolicyStatementNameOrEmpty

vRtrIfDHCP6PfxDelegationLstChgd		1.3.6.1.4.1.6527.3.1.2.3.39
The value of the object vRtrIfDHCP6PfxDelegationLstChgd indicates the Timestamp of the last change to any row the vRtrIfDHCP6PfxDelegationTable
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrIfDHCP6PfxDelegationTable		1.3.6.1.4.1.6527.3.1.2.3.40
The table vRtrIfDHCP6PfxDelegationTable is used to configure the feature of automated delegation of IPv6 prefixes using DHCP6. This feature is intended for delegating a long-lived prefix from a delegating router to a requesting router, where the delegating router does not require knowledge about the topology of the links in the network to which the prefixes will be assigned.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrIfDHCP6PfxDelegationEntry

vRtrIfDHCP6PfxDelegationEntry		1.3.6.1.4.1.6527.3.1.2.3.40.1
Each row entry represents a delegated IPv6 prefix. Entries can be created and deleted via SNMP SET operations. Creation requires a SET request containing the vRtrRowStatus.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrIfDHCP6PfxDelegationEntry

vRtrIfDHCP6PfxdPrefix		1.3.6.1.4.1.6527.3.1.2.3.40.1.1
The value of the object vRtrIfDHCP6PfxdPrefix specifies, together with the object vRtrIfDHCP6PfxdPrefixLen the ipv6 prefix that will be delegated.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressIPv6

vRtrIfDHCP6PfxdPrefixLen		1.3.6.1.4.1.6527.3.1.2.3.40.1.2
The value of the object vRtrIfDHCP6PfxdPrefixLen specifies, together with the object vRtrIfDHCP6PfxdPrefix the ipv6 prefix that will be delegated by this system.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressPrefixLength

vRtrIfDHCP6PfxdRowStatus		1.3.6.1.4.1.6527.3.1.2.3.40.1.3
The value of the object vRtrIfDHCP6PfxdRowStatus specifies the Row status of this table row. This object is used to create or delete rows in this table. The only allowed values for this object are: active(1), createAndGo(4), and destroy(6).
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

vRtrIfDHCP6PfxdLastChanged		1.3.6.1.4.1.6527.3.1.2.3.40.1.4
The value of vRtrIfDHCP6PfxdLastChanged indicates the sysUpTime when any object of the row is last changed.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrIfDHCP6PfxdDUID		1.3.6.1.4.1.6527.3.1.2.3.40.1.6
The value of the object vRtrIfDHCP6PfxdDUID specifies the ID of the requesting router. If set to a non zero value the prefix defined in this row will only be delegated to this router. If set to zero, the prefix will be delegated to any requesting router.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..64)

vRtrIfDHCP6PfxdIAID		1.3.6.1.4.1.6527.3.1.2.3.40.1.7
The value of the object vRtrIfDHCP6PfxdIAID specifies the IAID from the requesting router that needs to match in order to delegate the prefix defined in this row.If set to 0 no match on the received IAID is done.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

vRtrIfDHCP6PfxdPrefLifetime		1.3.6.1.4.1.6527.3.1.2.3.40.1.8
The value of the object vRtrIfDHCP6PfxdPrefLifetime specifies the time in seconds that this prefix remains preferred. The value of vRtrIfDHCP6PfxdPrefLifetime cannot be bigger then the value of vRtrIfDHCP6PfxdValidLifetime. The value 4294967295 is considered equal to infinity.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..4294967295

vRtrIfDHCP6PfxdValidLifetime		1.3.6.1.4.1.6527.3.1.2.3.40.1.9
The value of the object vRtrIfDHCP6PfxdValidLifetime specifies the time in seconds that the prefix is valid. The value 4294967295 is considered equal to infinity.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..4294967295

vRtrDHCP6DropStatTable		1.3.6.1.4.1.6527.3.1.2.3.41
The vRtrDHCP6DropStatTable has an entry for each virtual router configured in the system.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrDHCP6DropStatEntry

vRtrDHCP6DropStatEntry		1.3.6.1.4.1.6527.3.1.2.3.41.1
Each row entry represents a collection of DHCP6 drop reason statistics for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrDHCP6DropStatEntry

vRtrDHCP6DropStatReason		1.3.6.1.4.1.6527.3.1.2.3.41.1.1
The object vRtrDHCP6DropStatReason indicates the drop reason for which the object vRtrDHCP6DropStatPktsDropped contains the counter. none srcOperDown Dhcp6 oper state is not Up on src itf dstOperDown Dhcp6 oper state is not Up on dst itf rlyReplyOnClientItf Relay Reply Msg on Client Itf hopCount Hop Count Limit reached badRelayedMsg Missing Relay Msg option, or illegal msg type clientItfNotFound Unable to determine destinatinon client Itf noMemory Out of Memory noGlobalPfx No global Pfx on Client Itf noSrcIp Unable to determine src Ip Addr noRteToServer No route to server subMgmtUpdFail Subscr. Mgmt. Update failed relayForw Received Relay Forw Message msgTooSmall Packet too small to contain valid dhcp6 msg msgNotForServer Server cannot respond to this message noServerId No Server Id option in msg from server noClientId No Client Id option in msg from client serverIdInClientMsg Server Id option in client msg wrongServerId Server DUID in client msg does not match ours illegalUnicast Client sent message to unicast while not allowed illegalSrcIp Client sent message with illegal src Ip pdMsgNotSupported Client message type not supported in pfx delegation nbrAddrsExceeded Nbr of addrs or pfxs exceeds allowed maximum in msg clientMacNotResolved Unable to resolve client's mac address illegalAssignedAddr The client was assigned an illegal address msgEncodingError Illegal pfx length in a IA_PREFIX option
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	none(0), srcOperDown(1), dstOperDown(2), rlyReplyOnClientItf(3), hopCount(4), badRelayedMsg(5), clientItfNotFound(6), noMemory(7), noGlobalPfx(8), noSrcIp(9), noRteToServer(10), subMgmtUpdFail(11), relayForw(12), msgTooSmall(13), msgNotForServer(14), noServerId(15), noClientId(16), serverIdInClientMsg(17), wrongServerId(18), illegalUnicast(19), illegalSrcIp(20), pdMsgNotSupported(21), nbrAddrsExceeded(22), clientMacNotResolved(23), illegalAssignedAddr(24), msgEncodingError(25)

vRtrDHCP6DropStatLastCleared		1.3.6.1.4.1.6527.3.1.2.3.41.1.2
The value of vRtrDHCP6DropStatLastCleared indicates the sysUpTime when the counters of this row were last reset. A value of zero for this object indicates that the counters have not been reset since the system has last been initialized.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrDHCP6DropStatPktsDropped		1.3.6.1.4.1.6527.3.1.2.3.41.1.3
The value of vRtrDHCP6DropStatPktsDropped indicates the number of DHCP6 packets were dropped for the reason described in vRtrDHCP6DropStatReason.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrDHCP6MsgStatTable		1.3.6.1.4.1.6527.3.1.2.3.42
The vRtrDHCP6MsgStatTable has an entry for each virtual router configured in the system.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrDHCP6MsgStatEntry

vRtrDHCP6MsgStatEntry		1.3.6.1.4.1.6527.3.1.2.3.42.1
Each row entry represents a collection of counters for each DHCP6 message type for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrDHCP6MsgStatEntry

vRtrDHCP6MsgStatsMsgType		1.3.6.1.4.1.6527.3.1.2.3.42.1.1
The object vRtrDHCP6MsgStatsMsgType indicates the DHCP6 message type for which statistics are kept on a per vrtr basis.
Status: current	Access: not-accessible
OBJECT-TYPE
	TmnxDHCP6MsgType

vRtrDHCP6MsgStatsLstClrd		1.3.6.1.4.1.6527.3.1.2.3.42.1.2
The value of vRtrDHCP6MsgStatsLstClrd indicates the sysUpTime when the counters of this row were last reset. A value of zero for this object indicates that the counters have not been reset since the system has last been initialized.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

vRtrDHCP6MsgStatsRcvd		1.3.6.1.4.1.6527.3.1.2.3.42.1.3
The value of vRtrDHCP6MsgStatsRcvd indicates the number of DHCP6 packets were received of the DHCP6 message type indicated by vRtrDHCP6MsgStatsMsgType.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrDHCP6MsgStatsSent		1.3.6.1.4.1.6527.3.1.2.3.42.1.4
The value of vRtrDHCP6MsgStatsSent indicates the number of DHCP6 packets were sent of the DHCP6 message type indicated by vRtrDHCP6MsgStatsMsgType.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrDHCP6MsgStatsDropped		1.3.6.1.4.1.6527.3.1.2.3.42.1.5
The value of vRtrDHCP6MsgStatsDropped indicates the number of DHCP6 packets were dropped of the DHCP6 message type indicated by vRtrDHCP6MsgStatsMsgType.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrIfIpcpTable		1.3.6.1.4.1.6527.3.1.2.3.43
The vRtrIfIpcpTable table contains the configuration for IPCP interface configuration on the vRtrIfEntry with the same indices.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrIfIpcpEntry

vRtrIfIpcpEntry		1.3.6.1.4.1.6527.3.1.2.3.43.1
Each row entry represents the IPCP configuration for an interface. Entries are created and deleted when entries in the vRtrIfTable are created and deleted.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrIfIpcpEntry

vRtrIfIpcpPeerAddrType		1.3.6.1.4.1.6527.3.1.2.3.43.1.1
The value of vRtrIfIpcpPeerAddrType specifies the type of vRtrIfIpcpPeerAddr, the remote peer's IP address. vRtrIfIpcpPeerAddrType can be set to non-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6) When the value of vRtrIfIpcpPeerAddrType is unknown, the value of vRtrIfIpcpPeerAddr is assumed to be of size 0.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressType

vRtrIfIpcpPeerAddr		1.3.6.1.4.1.6527.3.1.2.3.43.1.2
The value of vRtrIfIpcpPeerAddr specifies the IP address that will be exchanged by IPCP, if applicable on a given interface, to configure the remote peer's IP address. The type of this address is specified by the value of vRtrIfIpcpPeerAddrType vRtrIfIpcpPeerAddr can be set to on-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6)
Status: current	Access: read-create
OBJECT-TYPE
	InetAddress	Size(0|4|16)

vRtrIfIpcpPriDnsAddrType		1.3.6.1.4.1.6527.3.1.2.3.43.1.3
The value of vRtrIfIpcpPriDnsAddrType specifies the type of vRtrIfIpcpPriDnsAddr, the IP address of the primary DNS to be used by the remote peer. vRtrIfIpcpPriDnsAddrType can be set ito non-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6) When the value of vRtrIfIpcpPriDnsAddrType is unknown, the value of vRtrIfIpcpPriDnsAddr is assumed to be of size 0.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressType

vRtrIfIpcpPriDnsAddr		1.3.6.1.4.1.6527.3.1.2.3.43.1.4
The value of vRtrIfIpcpPriDnsAddr specifies the IP address that will be exchanged by IPCP, if applicable on a given interface, to configure the primary DNS's IP address on the remote peer. The type of this address is specified by the value of vRtrIfIpcpPriDnsAddrType vRtrIfIpcpPriDnsAddr can be set to non-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6)
Status: current	Access: read-create
OBJECT-TYPE
	InetAddress	Size(0|4|16)

vRtrIfIpcpSecDnsAddrType		1.3.6.1.4.1.6527.3.1.2.3.43.1.5
The value of vRtrIfIpcpSecDnsAddrType specifies the type of vRtrIfIpcpSecDnsAddr, the IP address of the secondary DNS to be used by the remote peer. vRtrIfIpcpSecDnsAddrType can be set to non-deffault only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6) When the value of vRtrIfIpcpSecDnsAddrType is unknown, the value of vRtrIfIpcpSecDnsAddr is assumed to be of size 0.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressType

vRtrIfIpcpSecDnsAddr		1.3.6.1.4.1.6527.3.1.2.3.43.1.6
The value of vRtrIfIpcpSecDnsAddr specifies the IP address that will be exchanged by IPCP, if applicable on a given interface, to configure the secondary DNS's IP address on the remote peer. The type of this address is specified by the value of vRtrIfIpcpSecDnsAddrType. vRtrIfIpcpSecDnsAddr can be set to non-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6)
Status: current	Access: read-create
OBJECT-TYPE
	InetAddress	Size(0|4|16)

vRtrInetStatRteCpeChkStatsTable		1.3.6.1.4.1.6527.3.1.2.3.44
The vRtrInetStatRteCpeChkStatsTable has an entry for each entry in the vRtrInetStaticRouteTable that has a non-default values set for the vRtrInetStaticRouteCpeAddrType and vRtrInetStaticRouteCpeAddr objects.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		VRtrInetStatRteCpeChkStatsEntry

vRtrInetStatRteCpeChkStatsEntry		1.3.6.1.4.1.6527.3.1.2.3.44.1
Each row entry represents a collection of Customer-Provided Equipment (CPE) availability statistics for a virtual router static route in the system with non-default values set for the vRtrInetStaticRouteCpeAddrType and vRtrInetStaticRouteCpeAddr objects. Entries cannot be created and deleted via SNMP SET operations.
Status: current	Access: not-accessible
OBJECT-TYPE
	VRtrInetStatRteCpeChkStatsEntry

vRtrInetStatRteCpeChkUpTime		1.3.6.1.4.1.6527.3.1.2.3.44.1.1
The value of vRtrInetStatRteCpeChkUpTime indicates how long (in hundredths of a second) that the CPE has been available.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

vRtrInetStatRteCpeChkInPktCnt		1.3.6.1.4.1.6527.3.1.2.3.44.1.2
The value of vRtrInetStatRteCpeChkInPktCnt indicates the number of echo-reply packets received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrInetStatRteCpeChkOutPktCnt		1.3.6.1.4.1.6527.3.1.2.3.44.1.3
The value of vRtrInetStatRteCpeChkOutPktCnt indicates the number of echo-request packets sent.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

vRtrInetStatRteCpeChkDownTrans		1.3.6.1.4.1.6527.3.1.2.3.44.1.4
The value of vRtrInetStatRteCpeChkDownTrans indicates the number of times the CPE has transitioned to the unavailable state.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrInetStatRteCpeChkUpTrans		1.3.6.1.4.1.6527.3.1.2.3.44.1.5
The value of vRtrInetStatRteCpeChkUpTrans indicates the number of times the CPE has transitioned to the available state.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

vRtrInetStatRteCpeChkTTL		1.3.6.1.4.1.6527.3.1.2.3.44.1.6
The value of vRtrInetStatRteCpeChkTTL indicates the time, in seconds, before the CPE will be declared down. Upon receipt of an echo reply, it has the value of vRtrInetStaticRouteCpeInterval * vRtrInetStaticRouteCpeDropCnt and is decremented by 1 every second.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tmnxDscpAppTableLastChanged		1.3.6.1.4.1.6527.3.1.2.3.45
The value of tmnxDscpAppTableLastChanged indicates the sysUpTime at the time of the last modification of tmnxDscpAppTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

tmnxDscpAppTable		1.3.6.1.4.1.6527.3.1.2.3.46
The tmnxDscpAppTable has an entry for each application to Differential Services Code Point (DSCP) mapping in a virtual routing context on this system.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TmnxDscpAppEntry

tmnxDscpAppEntry		1.3.6.1.4.1.6527.3.1.2.3.46.1
Each row represents a mapping from an application to a DSCP value for particular virtual routing context. Entries are created at system initialization.
Status: current	Access: not-accessible
OBJECT-TYPE
	TmnxDscpAppEntry

tmnxDscpAppId		1.3.6.1.4.1.6527.3.1.2.3.46.1.1
The value of tmnxDscpAppId indicates the DSCP application identifier for a protocol on the Alcatel 7x50 SR router which generates control traffic over IP.
Status: current	Access: not-accessible
OBJECT-TYPE
	TDSCPAppId

tmnxDscpAppLastChanged		1.3.6.1.4.1.6527.3.1.2.3.46.1.2
The value of tmnxDscpAppLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

tmnxDscpAppDscpValue		1.3.6.1.4.1.6527.3.1.2.3.46.1.3
The value of tmnxDscpAppDscpValue specifies a DSCP Value to assign to the traffic generated by the application specified by tmnxDscpAppId. A value of -1 specifies that no explicit DSCP re-marking will be done for the traffic generated by the application specified by tmnxDscpAppId. The default value is protocol specific.
Status: current	Access: read-write
OBJECT-TYPE
	TDSCPValueOrNone

tmnxDscpFCTableLastChanged		1.3.6.1.4.1.6527.3.1.2.3.47
The value of tmnxDscpFCTableLastChanged indicates the sysUpTime at the time of the last modification of tmnxDscpFCTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

tmnxDscpFCTable		1.3.6.1.4.1.6527.3.1.2.3.48
The tmnxDscpFCTable has an entry for each mapping between a DSCP value and a Forwarding Class for self-generated protocol traffic in a virtual routing context on this system.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TmnxDscpFCEntry

tmnxDscpFCEntry		1.3.6.1.4.1.6527.3.1.2.3.48.1
Each row represents a mapping between a DSCP value and a Forwarding Class for self-generated protocol traffic in particular virtual routing context. Entries are created at system initialization.
Status: current	Access: not-accessible
OBJECT-TYPE
	TmnxDscpFCEntry

tmnxDscpFCDscpValue		1.3.6.1.4.1.6527.3.1.2.3.48.1.1
The value of tmnxDscpFCDscpValue specifies a DSCP value which will be mapped to the Forwarding Class specified by tmnxDscpFCValue.
Status: current	Access: not-accessible
OBJECT-TYPE
	TDSCPValue

tmnxDscpFCLastChanged		1.3.6.1.4.1.6527.3.1.2.3.48.1.3
The value of tmnxDscpFCLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

tmnxDscpFCValue		1.3.6.1.4.1.6527.3.1.2.3.48.1.4
The value of tmnxDscpFCValue specifies the Forwarding Class value for this mapping entry. The default value is best effort, which is specified by a value of 0.
Status: current	Access: read-write
OBJECT-TYPE
	TFCType

tmnxDot1pAppTableLastChanged		1.3.6.1.4.1.6527.3.1.2.3.49
The value of tmnxDot1pAppTableLastChanged indicates the sysUpTime at the time of the last modification of tmnxDot1pAppTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

tmnxDot1pAppTable		1.3.6.1.4.1.6527.3.1.2.3.50
The tmnxDot1pAppTable has an entry for each application to IEEE 802.1p priority (Dot1p) mapping in a virtual routing context on this system.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TmnxDot1pAppEntry

tmnxDot1pAppEntry		1.3.6.1.4.1.6527.3.1.2.3.50.1
Each row represents a mapping from an application to a Dot1p value for particular virtual routing context. Entries are created at system initialization.
Status: current	Access: not-accessible
OBJECT-TYPE
	TmnxDot1pAppEntry

tmnxDot1pAppId		1.3.6.1.4.1.6527.3.1.2.3.50.1.1
The value of tmnxDot1pAppId indicates the Dot1p application identifier for a Layer-2 protocol on the Alcatel 7x50 SR router.
Status: current	Access: not-accessible
OBJECT-TYPE
	TDot1pAppId

tmnxDot1pAppLastChanged		1.3.6.1.4.1.6527.3.1.2.3.50.1.2
The value of tmnxDot1pAppLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

tmnxDot1pAppValue		1.3.6.1.4.1.6527.3.1.2.3.50.1.3
The value of tmnxDot1pAppValue specifies a Dot1p value to assign to the traffic generated by the application specified by tmnxDot1pAppId. The default value is protocol specific.
Status: current	Access: read-write
OBJECT-TYPE
	Dot1PPriority

tmnxVRtrNotificationObjects		1.3.6.1.4.1.6527.3.1.2.3.21
OBJECT IDENTIFIER

vRtrAutoFilterDHCPClientAddress		1.3.6.1.4.1.6527.3.1.2.3.21.1
The Client IP address from the PDU causing the trap. Used by tmnxVRtrDHCPAFEntriesExceeded to report the client's IP address.
Status: obsolete	Access: accessible-for-notify
OBJECT-TYPE
	IpAddress

vRtrAutoFilterDHCPClientLease		1.3.6.1.4.1.6527.3.1.2.3.21.2
The lease time specified in the PDU causing the trap. Used by tmnxVRtrDHCPAFEntriesExceeded to report the lease time.
Status: obsolete	Access: accessible-for-notify
OBJECT-TYPE
	Unsigned32

vRtrDHCPClientLease		1.3.6.1.4.1.6527.3.1.2.3.21.3
The value of the object vRtrDHCPClientLease indicates the lease time specified in the PDU causing the trap.
Status: obsolete	Access: accessible-for-notify
OBJECT-TYPE
	Integer32

vRtrDhcpLseStateOldCiAddr		1.3.6.1.4.1.6527.3.1.2.3.21.4
The value of the object vRtrDhcpLseStateOldCiAddr indicates the Client IP address that was formerly assigned to this Least state.
Status: obsolete	Access: accessible-for-notify
OBJECT-TYPE
	IpAddress

vRtrDhcpLseStateOldChAddr		1.3.6.1.4.1.6527.3.1.2.3.21.5
The value of the object vRtrDhcpLseStateOldChAddr indicates the Client MAC address that was formerly assigned to this Least state.
Status: obsolete	Access: accessible-for-notify
OBJECT-TYPE
	MacAddress

vRtrDhcpLseStateNewCiAddr		1.3.6.1.4.1.6527.3.1.2.3.21.6
The value of the object vRtrDhcpLseStateNewCiAddr indicates the Client IP address specified in the PDU causing the trap.
Status: obsolete	Access: accessible-for-notify
OBJECT-TYPE
	IpAddress

vRtrDhcpLseStateNewChAddr		1.3.6.1.4.1.6527.3.1.2.3.21.7
The value of the object vRtrDhcpLseStateNewChAddr indicates the Client MAC address specified in the PDU causing the trap.
Status: obsolete	Access: accessible-for-notify
OBJECT-TYPE
	MacAddress

vRtrDhcpRestoreLseStateCiAddr		1.3.6.1.4.1.6527.3.1.2.3.21.8
The value of the object vRtrDhcpRestoreLseStateCiAddr indicates the IP address specified in the persistency record causing the trap.
Status: obsolete	Access: accessible-for-notify
OBJECT-TYPE
	IpAddress

vRtrDhcpRestoreLseStateVRtrId		1.3.6.1.4.1.6527.3.1.2.3.21.9
The value of the object vRtrDhcpRestoreLseStateVRtrId indicates the serviceId specified in the persistency record causing the trap.
Status: obsolete	Access: accessible-for-notify
OBJECT-TYPE
	TmnxVRtrID

vRtrDhcpRestoreLseStateIfIndex		1.3.6.1.4.1.6527.3.1.2.3.21.10
The value of the object vRtrDhcpRestoreLseStateIfIndex indicates the Port ID specified in the persistency record causing the trap.
Status: obsolete	Access: accessible-for-notify
OBJECT-TYPE
	InterfaceIndex

vRtrDhcpRestoreLseStateProblem		1.3.6.1.4.1.6527.3.1.2.3.21.11
The value of the object vRtrDhcpRestoreLseStateProblem indicates why the persisency record cannot be restored.
Status: obsolete	Access: accessible-for-notify
OBJECT-TYPE
	DisplayString

vRtrDhcpPacketProblem		1.3.6.1.4.1.6527.3.1.2.3.21.12
The value of the object vRtrDhcpPacketProblem indicates information on a received DHCP packet is considered suspicious by the system.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	DisplayString

vRtrDhcpLseStatePopulateError		1.3.6.1.4.1.6527.3.1.2.3.21.13
The value of the object vRtrDhcpLseStatePopulateError indicates the reason why the system was unable to update the Lease state table with the information contained in the received DHCP ACK message.
Status: obsolete	Access: accessible-for-notify
OBJECT-TYPE
	DisplayString

vRtrBfdSlotNumber		1.3.6.1.4.1.6527.3.1.2.3.21.14
The value of vRtrBfdSlotNumber indicates the IOM slot number where the number of supported BFD sessions has reached the maximum value. This object is reported when the tmnxVRtrBfdMaxSessionOnSlot notification is generated.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	TmnxSlotNum

vRtrNumberOfBfdSessionsOnSlot		1.3.6.1.4.1.6527.3.1.2.3.21.15
The value of vRtrNumberOfBfdSessionsOnSlot indicates the current number of BFD sessions on the slot indicated by vRtrBfdSlotNumber. This object is reported when the tmnxVRtrBfdMaxSessionOnSlot notification is generated.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Unsigned32

vRtrBfdMaxSessionReason		1.3.6.1.4.1.6527.3.1.2.3.21.16
The value of vRtrBfdMaxSessionReason indicates the reason the maximum numbers of sessions on this IOM slot was reached. This object is reported when the tmnxVRtrBfdMaxSessionOnSlot notification is generated.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	BITS	maxSessionsPerSlot(0), maxTxPacketRate(1), maxRxPacketRate(2)

vRtrDHCP6ServerNetAddrType		1.3.6.1.4.1.6527.3.1.2.3.21.17
The value of the object vRtrDHCP6ServerNetAddrType indicates the address type of vRtrDHCP6ServerNetAddr.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	InetAddressType

vRtrDHCP6ServerNetAddr		1.3.6.1.4.1.6527.3.1.2.3.21.18
The value of the object vRtrDHCP6ServerNetAddr indicates the IP address of the DHCP server.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	InetAddress

vRtrDHCP6ClientNetAddrType		1.3.6.1.4.1.6527.3.1.2.3.21.19
The value of the object vRtrDHCP6ClientNetAddrType indicates the address type of vRtrDHCP6ClientNetAddr.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	InetAddressType

vRtrDHCP6ClientNetAddr		1.3.6.1.4.1.6527.3.1.2.3.21.20
The value of the object vRtrDHCP6ClientNetAddr indicates the IP address of the DHCP client.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	InetAddress

vRtrDHCP6AssignedNetAddrType		1.3.6.1.4.1.6527.3.1.2.3.21.21
The value of the object vRtrDHCP6AssignedNetAddrType indicates the address type of vRtrDHCP6AssignedNetAddr.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	InetAddressType

vRtrDHCP6AssignedNetAddr		1.3.6.1.4.1.6527.3.1.2.3.21.22
The value of the object vRtrDHCP6AssignedNetAddr indicates the IP address assigned to the DHCP client.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	InetAddress

vRtrDHCP6AssignedPrefixLen		1.3.6.1.4.1.6527.3.1.2.3.21.23
The value of vRtrDHCP6AssignedPrefixLen specifies the length of the IP netmask for vRtrDHCP6AssignedNetAddr.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	InetAddressPrefixLength

vRtrDHCP6OldAssignedNetAddrType		1.3.6.1.4.1.6527.3.1.2.3.21.24
The value of the object vRtrDHCP6OldAssignedNetAddrType indicates the address type of vRtrDHCP6OldAssignedNetAddr.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	InetAddressType

vRtrDHCP6OldAssignedNetAddr		1.3.6.1.4.1.6527.3.1.2.3.21.25
The value of the object vRtrDHCP6OldAssignedNetAddr indicates the IP address formerly assigned to the DHCP client.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	InetAddress

vRtrDHCP6OldAssignedPrefixLen		1.3.6.1.4.1.6527.3.1.2.3.21.26
The value of vRtrDHCP6OldAssignedPrefixLen specifies the length of the IP netmask for vRtrDHCP6OldAssignedNetAddr.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	InetAddressPrefixLength

vRtrDHCP6NewClientId		1.3.6.1.4.1.6527.3.1.2.3.21.27
The value of vRtrDHCP6NewClientId indicates the new DHCP6 clients unique identifier (DUID).
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	OCTET STRING	Size(0..255)

vRtrDHCP6OldClientId		1.3.6.1.4.1.6527.3.1.2.3.21.28
The value of vRtrDHCP6OldClientId indicates the old DHCP6 clients unique identifier (DUID).
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	OCTET STRING	Size(0..255)

vRtrDHCP6LeaseOverrideResult		1.3.6.1.4.1.6527.3.1.2.3.21.29
The value of the object vRtrDHCP6LeaseOverrideResult indicates whether or not the lease state has been overridden.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	DisplayString

vRtrInetStatRteCpeNotifyAddrType		1.3.6.1.4.1.6527.3.1.2.3.21.30
The value of the object vRtrInetStatRteCpeNotifyAddrType indicates the address type of vRtrInetStatRteCpeNotifyAddr.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	InetAddressType

vRtrInetStatRteCpeNotifyAddr		1.3.6.1.4.1.6527.3.1.2.3.21.31
The value of the object vRtrInetStatRteCpeNotifyAddr indicates the IP address of the CPE.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	InetAddress

vRtrInetStaticRouteCpeStatus		1.3.6.1.4.1.6527.3.1.2.3.21.32
The value of the object vRtrInetStaticRouteCpeStatus indicates whether or not the CPE associated with a static route is 'reachable' or 'unreachable'.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	reachable(0), unreachable(1)

vRtrManagedRouteInetAddrType		1.3.6.1.4.1.6527.3.1.2.3.21.33
The value of vRtrManagedRouteInetAddrType indicates the address type of vRtrManagedRouteInetAddr.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	InetAddressType

vRtrManagedRouteInetAddr		1.3.6.1.4.1.6527.3.1.2.3.21.34
The value of vRtrManagedRouteInetAddr indicates the IP address of the managed route.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	InetAddress	Size(0|4)

vRtrManagedRoutePrefixLen		1.3.6.1.4.1.6527.3.1.2.3.21.35
The value of vRtrManagedRoutePrefixLen indicates the prefix length of the subnet associated with vRtrManagedRouteInetAddr.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	InetAddressPrefixLength

vRtrFailureDescription		1.3.6.1.4.1.6527.3.1.2.3.21.36
The value of the object vRtrFailureDescription is a printable character string which contains information about the reason why the notification is sent.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	DisplayString

tmnxVRtrMidRouteTCA		1.3.6.1.4.1.6527.3.1.3.3.0.1
The tmnxVRtrMidRouteTCA notification is generated when the number of routes contained in a VPRN exceeds the value specified by vRtrMidRouteThreshold. No other notifications of this type are generated until after the soak period specified by vRtrRouteThresholdSoakTime has expired.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxVRtrHighRouteTCA		1.3.6.1.4.1.6527.3.1.3.3.0.2
The tmnxVRtrHighRouteTCA notification is generated when the number of routes contained in a VPRN exceeds the value specified by vRtrHighRouteThreshold. No other notifications of this type are generated until after the soak period specified by vRtrRouteThresholdSoakTime has expired.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxVRtrHighRouteCleared		1.3.6.1.4.1.6527.3.1.3.3.0.3
The tmnxVRtrHighRouteCleared notification is generated when the number of routes contained in a VPRN has dropped below the vRtrHighRouteThreshold value following the generation of a tmnxVRtrHighRouteTCA notification.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxVRtrIllegalLabelTCA		1.3.6.1.4.1.6527.3.1.3.3.0.4
The tmnxVRtrIllegalLabelTCA notification is generated when the number of illegal label violations on a VRF has exceeded the value specified by vRtrIllegalLabelThreshold.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxVRtrMcastMidRouteTCA		1.3.6.1.4.1.6527.3.1.3.3.0.5
The tmnxVRtrMcastMidRouteTCA notification is generated when the number of multicast routes contained in a VPRN exceeds the value specified by vRtrMcastMidRouteThreshold. No other notifications of this type are generated until after the soak period specified by vRtrRouteThresholdSoakTime has expired.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxVRtrMcastMaxRoutesTCA		1.3.6.1.4.1.6527.3.1.3.3.0.6
The tmnxVRtrMcastMaxRoutesTCA notification is generated when the number of multicast routes contained in a VPRN exceeds the value specified by vRtrMaxMcastNumRoutes. No other notifications of this type are generated until after the soak period specified by vRtrRouteThresholdSoakTime has expired.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxVRtrMcastMaxRoutesCleared		1.3.6.1.4.1.6527.3.1.3.3.0.7
The tmnxVRtrMcastMaxRoutesCleared notification is generated when the number of multicast routes contained in a VPRN has dropped below the vRtrMaxMcastNumRoutes value following the generation of a tmnxVRtrMcastMaxRoutesTCA notification.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxVRtrMaxArpEntriesTCA		1.3.6.1.4.1.6527.3.1.3.3.0.8
The tmnxVRtrMaxArpEntriesTCA notification is generated when the number of ARP entries in a VPRN exceeds the maximum supported.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxVRtrMaxArpEntriesCleared		1.3.6.1.4.1.6527.3.1.3.3.0.9
The tmnxVRtrMaxArpEntriesCleared notification is generated when the number of ARP entries contained in a VPRN has dropped below the maximum value following the generation of a tmnxVRtrMaxArpEntriesTCA notification.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxVRtrDHCPAFEntriesExceeded		1.3.6.1.4.1.6527.3.1.3.3.0.10
The tmnxVRtrDHCPAFEntriesExceeded notification is generated when the number of DHCP 'AutoFilter' entries on a given interface reaches a user configurable upper limit given by vRtrIfDHCPAutoFilter.
Status: obsolete	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxVRtrMaxRoutes		1.3.6.1.4.1.6527.3.1.3.3.0.11
The tmnxVRtrMaxRoutes notification is generated when the number of routes contained in a VPRN reaches the value specified by vRtrMaxNumRoutes.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxVRtrDHCPLseStsExceeded		1.3.6.1.4.1.6527.3.1.3.3.0.12
The tmnxVRtrDHCPLseStsExceeded notification is generated when the number of DHCP lease states entries on a given interface reaches a user configurable upper limit.
Status: obsolete	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxVRtrDHCPLeaseStateOverride		1.3.6.1.4.1.6527.3.1.3.3.0.13
The tmnxVRtrDHCPLeaseStateOverride notification is generated when an existing DHCP lease state is overridden by a new lease state which has the same IP address but a different MAC address.
Status: obsolete	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxVRtrDHCPSuspiciousPcktRcvd		1.3.6.1.4.1.6527.3.1.3.3.0.14
The tmnxVRtrDHCPSuspiciousPcktRcvd notification is generated when a DHCP packet is received with suspicious content.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxVRtrDHCPLseStRestoreProblem		1.3.6.1.4.1.6527.3.1.3.3.0.15
The tmnxVRtrDHCPLseStRestoreProblem notification is generated when an an error is detected while processing a persistency record.
Status: obsolete	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxVRtrDHCPLseStatePopulateErr		1.3.6.1.4.1.6527.3.1.3.3.0.16
The tmnxVRtrDHCPLseStatePopulateErr notification indicates that the system was unable to update the Lease State Table with the information contained in the DHCP ACK message. The DHCP ACK message has been discarded.
Status: obsolete	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxVRtrBfdSessionDown		1.3.6.1.4.1.6527.3.1.3.3.0.17
The tmnxVRtrBfdSessionDown notification is generated when a BFD session goes down.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxVRtrBfdMaxSessionOnSlot		1.3.6.1.4.1.6527.3.1.3.3.0.18
The tmnxVRtrBfdMaxSessionOnSlot notification is generated when the maximum number of BFD sessions has been reached on the slot indicated in 'vRtrBfdSlotNumber'.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxVRtrBfdPortTypeNotSupported		1.3.6.1.4.1.6527.3.1.3.3.0.19
The tmnxVRtrBfdPortTypeNotSupported notification is generated when BFD is not supported on the port specified in 'tmnxPortNotifyPortId'.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxVRtrDHCPIfLseStatesExceeded		1.3.6.1.4.1.6527.3.1.3.3.0.20
The tmnxVRtrDHCPIfLseStatesExceeded notifications is generated when the number of lease states on an interface exceeds vRtrIfDHCPLeasePopulate.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxVRtrDHCP6RelayLseStExceeded		1.3.6.1.4.1.6527.3.1.3.3.0.21
The tmnxVRtrDHCP6RelayLseStExceeded notifications is generated when the number of lease states populated by dhcp6 relay on an interface exceeds vRtrIfDHCP6LeasePopulate.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxVRtrDHCP6ServerLseStExceeded		1.3.6.1.4.1.6527.3.1.3.3.0.22
The tmnxVRtrDHCP6ServerLseStExceeded notifications is generated when the number of lease states populated by dhcp6 server on an interface exceeds vRtrIfDHCP6ServerMaxLeaseStates.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxVRtrDHCP6LseStateOverride		1.3.6.1.4.1.6527.3.1.3.3.0.23
The tmnxVRtrDHCP6LseStateOverride notifications is generated when an existing DHCP6 lease state can be overridden by a new lease state. This is allowed if the new lease state has the same IP address but a different client id or mac address. This is not allowed if the new lease state has the same IP address but a different prefix length.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxVRtrDHCP6RelayReplyStripUni		1.3.6.1.4.1.6527.3.1.3.3.0.24
The tmnxVRtrDHCP6RelayReplyStripUni notifications is generated when a unicast option is stripped from a message relayed from a server to a client in a relay reply message.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxVRtrDHCP6IllegalClientAddr		1.3.6.1.4.1.6527.3.1.3.3.0.25
The tmnxVRtrDHCP6IllegalClientAddr notifications is generated when an incoming message is dropped because the client's source IP does not match the subnet of the incoming interface.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxVRtrDHCP6AssignedIllegSubnet		1.3.6.1.4.1.6527.3.1.3.3.0.26
The tmnxVRtrDHCP6AssignedIllegSubnet notifications is generated when an IP address assigned to the client does not match the subnet of the interface.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxVRtrDHCP6ClientMacUnresolved		1.3.6.1.4.1.6527.3.1.3.3.0.27
The tmnxVRtrDHCP6ClientMacUnresolved notifications is generated when we receive a relay reply for a client, and the client's MAC address has not been resolved yet.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxVRtrBfdSessionUp		1.3.6.1.4.1.6527.3.1.3.3.0.28
The tmnxVRtrBfdSessionUp notification is generated when a BFD session goes up.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxVRtrIPv6MidRouteTCA		1.3.6.1.4.1.6527.3.1.3.3.0.29
The tmnxVRtrIPv6MidRouteTCA notification is generated when the number of IPv6 routes contained in a VPRN exceeds the value specified by vRtrIPv6MidRouteThreshold. No other notifications of this type are generated until after the soak period specified by vRtrIPv6RouteThresholdSoakTime has expired.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxVRtrIPv6HighRouteTCA		1.3.6.1.4.1.6527.3.1.3.3.0.30
The tmnxVRtrIPv6HighRouteTCA notification is generated when the number of IPv6 routes contained in a VPRN exceeds the value specified by vRtrIPv6HighRouteThreshold. No other notifications of this type are generated until after the soak period specified by vRtrIPv6RouteThresholdSoakTime has expired.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxVRtrIPv6HighRouteCleared		1.3.6.1.4.1.6527.3.1.3.3.0.31
The tmnxVRtrIPv6HighRouteCleared notification is generated when the number of IPv6 routes contained in a VPRN has dropped below the vRtrIPv6HighRouteThreshold value following the generation of a tmnxVRtrIPv6HighRouteTCA notification.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxVRtrStaticRouteCPEStatus		1.3.6.1.4.1.6527.3.1.3.3.0.32
The tmnxVRtrStaticRouteCPEStatus notification is generated when a CPE associated with a static route, as specified by the vRtrInetStatRteCpeNotifyAddr object, becomes reachable or unreachable.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxVRtrBfdSessionDeleted		1.3.6.1.4.1.6527.3.1.3.3.0.33
The tmnxVRtrBfdSessionDeleted notification is generated when a BFD session is deleted.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxVRtrBfdSessionProtChange		1.3.6.1.4.1.6527.3.1.3.3.0.34
The tmnxVRtrBfdSessionProtChange notification is generated when there is a change in the list of protocols using the BFD session.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxVRtrManagedRouteAddFailed		1.3.6.1.4.1.6527.3.1.3.3.0.35
The tmnxVRtrManagedRouteAddFailed notification is generated when a managed route could not be installed.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

tmnxVRtrCompliances		1.3.6.1.4.1.6527.3.1.1.3.1
OBJECT IDENTIFIER

tmnxVRtrGroups		1.3.6.1.4.1.6527.3.1.1.3.2
OBJECT IDENTIFIER

tmnxVRtr7450V4v0Compliance		1.3.6.1.4.1.6527.3.1.1.3.1.4
The compliance statement for management of VRTR instances on Alcatel 7450 ESS series systems release R4.0.
Status: obsolete	Access: accessible-for-notify
MODULE-COMPLIANCE

tmnxVRtr7750V4v0Compliance		1.3.6.1.4.1.6527.3.1.1.3.1.5
The compliance statement for management of VRTR instances on Alcatel 7750 SR series systems release R4.0.
Status: obsolete	Access: accessible-for-notify
MODULE-COMPLIANCE

tmnxVRtr7450V5v0Compliance		1.3.6.1.4.1.6527.3.1.1.3.1.6
The compliance statement for management of VRTR instances on Alcatel 7450 ESS series systems release R5.0.
Status: obsolete	Access: accessible-for-notify
MODULE-COMPLIANCE

tmnxVRtr7750V5v0Compliance		1.3.6.1.4.1.6527.3.1.1.3.1.7
The compliance statement for management of VRTR instances on Alcatel 7750 SR series systems release R5.0.
Status: obsolete	Access: accessible-for-notify
MODULE-COMPLIANCE

tmnxVRtr7450V6v0Compliance		1.3.6.1.4.1.6527.3.1.1.3.1.8
The compliance statement for management of VRTR instances on Alcatel 7450 ESS series systems release R6.0.
Status: current	Access: accessible-for-notify
MODULE-COMPLIANCE

tmnxVRtr77x0V6v0Compliance		1.3.6.1.4.1.6527.3.1.1.3.1.9
The compliance statement for management of VRTR instances on Alcatel 7x50 SR series systems release R6.0.
Status: current	Access: accessible-for-notify
MODULE-COMPLIANCE

tmnxVRtrGlobalR2r1Group		1.3.6.1.4.1.6527.3.1.1.3.2.10
The group of objects supporting management of general capabilities for transport and virtual routers on version 2.1 Alcatel 7x50 SR series systems.
Status: obsolete	Access: accessible-for-notify
OBJECT-GROUP

tmnxVRtrIfSubscrAuthV3v0Group		1.3.6.1.4.1.6527.3.1.1.3.2.11
The group of objects supporting management of DHCP authentication on version 3.0 Alcatel 7x50 SR series systems.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxVRtrV4v0Group		1.3.6.1.4.1.6527.3.1.1.3.2.14
The group of objects supporting management of transport and virtual routers on version 4.0 Alcatel 7x50 SR series systems.
Status: obsolete	Access: accessible-for-notify
OBJECT-GROUP

tmnxVRtrIfV4v0Group		1.3.6.1.4.1.6527.3.1.1.3.2.15
The group of objects supporting management of virtual interfaces on version 4.0 Alcatel 7x50 SR series systems.
Status: obsolete	Access: accessible-for-notify
OBJECT-GROUP

tmnxVRtrIpV4v0Group		1.3.6.1.4.1.6527.3.1.1.3.2.16
The group of objects supporting management of IP capabilities for transport and virtual routers on version 4.0 Alcatel 7x50 SR series systems.
Status: obsolete	Access: accessible-for-notify
OBJECT-GROUP

tmnxVRtrObsoletedObjectsV4v0Group		1.3.6.1.4.1.6527.3.1.1.3.2.17
The group of objects no longer supported in version 4.0 of Alcatel 7x50 SR series systems.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxVRtrBfdV4v0Group		1.3.6.1.4.1.6527.3.1.1.3.2.18
The group of objects supporting Bi-directional Forwarding Detection on version 4.0 Alcatel 7x50 series systems.
Status: obsolete	Access: accessible-for-notify
OBJECT-GROUP

tmnxVRtrNotificationV4v0Group		1.3.6.1.4.1.6527.3.1.1.3.2.19
The group of notifications supporting the transport and virtual router capabilities on version 4.0 Alcatel 7x50 SR series systems.
Status: obsolete	Access: accessible-for-notify
NOTIFICATION-GROUP

tmnxVRtrIPv6IfV4v0Group		1.3.6.1.4.1.6527.3.1.1.3.2.20
The group of objects supporting management of IPv6 virtual interfaces on version 4.0 Alcatel 7x50 SR series systems.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxVRtrIPv6V4v0Group		1.3.6.1.4.1.6527.3.1.1.3.2.21
The group of objects supporting management of IPv6 transport and virtual routers on version 4.0 Alcatel 7x50 SR series systems.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxVRtrIPv6IpV4v0Group		1.3.6.1.4.1.6527.3.1.1.3.2.22
The group of objects supporting management of Ipv6 IP capabilities for transport and virtual routers on version 4.0 Alcatel 7x50 SR series systems.
Status: obsolete	Access: accessible-for-notify
OBJECT-GROUP

tmnxVRtrObsoleteNotificationGroup		1.3.6.1.4.1.6527.3.1.1.3.2.23
The group of obsolete notifications for the transport and virtual router capabilities on Alcatel 7x50 SR series systems.
Status: current	Access: accessible-for-notify
NOTIFICATION-GROUP

tmnxVRtrIPv6IpV5v0Group		1.3.6.1.4.1.6527.3.1.1.3.2.24
The group of objects supporting management of Ipv6 IP capabilities for transport and virtual routers on version 5.0 Alcatel 7x50 SR series systems.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxVRtrIfV5v0Group		1.3.6.1.4.1.6527.3.1.1.3.2.25
The group of objects supporting management of virtual interfaces on version 5.0 Alcatel 7x50 SR series systems.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxVRtrIpV5v0Group		1.3.6.1.4.1.6527.3.1.1.3.2.26
The group of objects supporting management of IP capabilities for transport and virtual routers on version 4.0 Alcatel 7x50 SR series systems.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxVRtrV5v0Group		1.3.6.1.4.1.6527.3.1.1.3.2.27
The group of objects supporting management of transport and virtual routers on version 5.0 Alcatel 7x50 SR series systems.
Status: obsolete	Access: accessible-for-notify
OBJECT-GROUP

tmnxVRtrNotificationV5v0Group		1.3.6.1.4.1.6527.3.1.1.3.2.28
The group of notifications supporting the transport and virtual router capabilities on version 5.0 Alcatel 7xx0 SR series systems.
Status: obsolete	Access: accessible-for-notify
NOTIFICATION-GROUP

tmnxVRtrObsoleteV5v0Group		1.3.6.1.4.1.6527.3.1.1.3.2.29
The group of objects in ALCATEL-IND1-TIMETRA-VRTR-MIB which are obsoleted in Alcatel 7x50 SR 5.0 series systems.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxVRtrNotificationObjV5v0Group		1.3.6.1.4.1.6527.3.1.1.3.2.30
The group of objects supporting management of notification objects on Alcatel 7x50 SR 5.0 series systems.
Status: obsolete	Access: accessible-for-notify
OBJECT-GROUP

tmnxVRtrIfDhcpServerGroup		1.3.6.1.4.1.6527.3.1.1.3.2.31
The group of objects supporting the DHCP server capabilities on version 6.0 Alcatel 7x50 SR series systems.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxVRtrV6v0Group		1.3.6.1.4.1.6527.3.1.1.3.2.32
The group of objects supporting management of transport and virtual routers on version 6.0 Alcatel 7x50 SR series systems.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxVRtrStaticRteCPEChkV6v0Group		1.3.6.1.4.1.6527.3.1.1.3.2.33
The group of objects supporting the Static Route CPE Check capability on version 6.0 Alcatel 7x50 SR series systems.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxVRtrIfIpcpV6v0Group		1.3.6.1.4.1.6527.3.1.1.3.2.34
The group of objects supporting management of IPCP extensions for virtual interfaces on version 6.0 Alcatel 7x50 SR series systems
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxVRtrIfCpmProtectGroup		1.3.6.1.4.1.6527.3.1.1.3.2.35
The group of objects supporting management of CPM Protection for virtual interfaces on Alcatel 7xxx series systems.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxDscpAppV6v0Group		1.3.6.1.4.1.6527.3.1.1.3.2.36
The group of objects supporting management of DSCP marking for self-generated protocol control traffic on Alcatel 7x50 SR series systems release 6.0.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxVRtrIfDHCPRelayGroup		1.3.6.1.4.1.6527.3.1.1.3.2.37
The group of objects supporting management of DHCP Relay on virtual interfaces on version 6.0 Alcatel 7x50 SR series systems
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxVRtrGlobalV6v0Group		1.3.6.1.4.1.6527.3.1.1.3.2.38
The group of objects supporting management of general capabilities for transport and virtual routers on version 6.0 Alcatel 7x50 SR series systems.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxVRtrNotificationObjV6v0Group		1.3.6.1.4.1.6527.3.1.1.3.2.39
The group of objects supporting management of notification objects on Alcatel 7x50 SR 6.0 series systems.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

tmnxVRtrNotificationV6v0Group		1.3.6.1.4.1.6527.3.1.1.3.2.40
The group of notifications supporting the transport and virtual router capabilities on version 6.0 Alcatel 7xx0 SR series systems.
Status: current	Access: accessible-for-notify
NOTIFICATION-GROUP

tmnxVRtrBfdV6v0Group		1.3.6.1.4.1.6527.3.1.1.3.2.41
The group of objects supporting Bi-directional Forwarding Detection on version 6.0 Alcatel 7xxx series systems.
Status: current	Access: accessible-for-notify
OBJECT-GROUP