ALCATEL-IND1-TIMETRA-SAP-MIB

File: ALCATEL-IND1-TIMETRA-SAP-MIB.mib (411449 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
IF-MIB INET-ADDRESS-MIB ATM-TC-MIB
ALCATEL-IND1-TIMETRA-TC-MIB ALCATEL-IND1-TIMETRA-SERV-MIB ALCATEL-IND1-TIMETRA-GLOBAL-MIB
ALCATEL-IND1-TIMETRA-QOS-MIB ALCATEL-IND1-TIMETRA-FILTER-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Gauge32 Integer32 Unsigned32
IpAddress Counter64 Counter32
MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP
DisplayString RowStatus MacAddress
TimeStamp TruthValue InterfaceIndexOrZero
InetAddressType InetAddress AtmTrafficDescrParamIndex
ServiceAdminStatus TmnxPortID TmnxEncapVal
TmnxServId TmnxCustId TNamedItem
TIngressQueueId TEgressQueueId TNamedItemOrEmpty
TPortSchedulerPIR TmnxActionType TmnxOperState
TmnxIgmpVersion TCpmProtPolicyID TCIRRate
TPIRRate TmnxEnabledDisabled TItemDescription
TPolicyStatementNameOrEmpty TSapIngressPolicyID TSapEgressPolicyID
tmnxServObjs tmnxServConformance tmnxServNotifications
custId svcId svcVpnId
tlsMstiInstanceId tstpTraps tmnxOtherBridgeId
tmnxCustomerBridgeId tmnxCustomerRootBridgeId protectedMacForNotify
tlsDhcpLseStateNewCiAddr tlsDhcpLseStateNewChAddr tlsDHCPClientLease
tlsDhcpLseStateOldCiAddr tlsDhcpLseStateOldChAddr hostConnectivityCiAddrType
hostConnectivityCiAddr hostConnectivityChAddr staticHostDynamicMacIpAddress
staticHostDynamicMacConflict svcTlsMacMoveMaxRate svcDhcpProxyError
svcDhcpCoAError svcDhcpSubAuthError tlsDhcpPacketProblem
svcDhcpLseStateNewCiAddr svcDhcpLseStateNewChAddr svcDhcpClientLease
svcDhcpLseStateOldCiAddr svcDhcpLseStateOldChAddr svcDhcpPacketProblem
svcDhcpLseStatePopulateError ServObjName ServObjDesc
ServType VpnId TlsLimitMacMoveLevel
TlsLimitMacMove StpExceptionCondition BridgeId
TSapIngQueueId TSapEgrQueueId TStpPortState
StpPortRole StpProtocol MvplsPruneState
TQosQueueAttribute TVirtSchedAttribute MstiInstanceIdOrZero
TdmOptionsCasTrunkFraming CemSapReportAlarm CemSapEcid
L2ptProtocols ConfigStatus strayPkts
malformedPkts pktLoss bfrOverrun
bfrUnderrun timetraSRMIBModules TBurstSize
TBurstPercentOrDefault TAdaptationRule tVirtualSchedulerName
tSchedulerPolicyName TFilterID

Defined Types

SapBaseInfoEntry  
SEQUENCE    
  sapPortId TmnxPortID
  sapEncapValue TmnxEncapVal
  sapRowStatus RowStatus
  sapType ServType
  sapDescription ServObjDesc
  sapAdminStatus ServiceAdminStatus
  sapOperStatus INTEGER
  sapIngressQosPolicyId TSapIngressPolicyID
  sapIngressMacFilterId TFilterID
  sapIngressIpFilterId TFilterID
  sapEgressQosPolicyId TSapEgressPolicyID
  sapEgressMacFilterId TFilterID
  sapEgressIpFilterId TFilterID
  sapMirrorStatus INTEGER
  sapIesIfIndex InterfaceIndexOrZero
  sapLastMgmtChange TimeStamp
  sapCollectAcctStats TruthValue
  sapAccountingPolicyId Unsigned32
  sapVpnId VpnId
  sapCustId TmnxCustId
  sapCustMultSvcSite ServObjName
  sapIngressQosSchedulerPolicy ServObjName
  sapEgressQosSchedulerPolicy ServObjName
  sapSplitHorizonGrp ServObjName
  sapIngressSharedQueuePolicy ServObjName
  sapIngressMatchQinQDot1PBits INTEGER
  sapOperFlags BITS
  sapLastStatusChange TimeStamp
  sapAntiSpoofing INTEGER
  sapIngressIpv6FilterId TFilterID
  sapEgressIpv6FilterId TFilterID
  sapTodSuite TNamedItemOrEmpty
  sapIngUseMultipointShared TruthValue
  sapEgressQinQMarkTopOnly TruthValue
  sapEgressAggRateLimit TPortSchedulerPIR
  sapEndPoint ServObjName
  sapIngressVlanTranslation INTEGER
  sapIngressVlanTranslationId Integer32
  sapSubType INTEGER
  sapCpmProtPolicyId TCpmProtPolicyID
  sapCpmProtMonitorMac TruthValue
  sapEgressFrameBasedAccounting TruthValue

SapTlsInfoEntry  
SEQUENCE    
  sapTlsStpAdminStatus TmnxEnabledDisabled
  sapTlsStpPriority INTEGER
  sapTlsStpPortNum INTEGER
  sapTlsStpPathCost INTEGER
  sapTlsStpRapidStart TmnxEnabledDisabled
  sapTlsStpBpduEncap INTEGER
  sapTlsStpPortState TStpPortState
  sapTlsStpDesignatedBridge BridgeId
  sapTlsStpDesignatedPort Integer32
  sapTlsStpForwardTransitions Gauge32
  sapTlsStpInConfigBpdus Gauge32
  sapTlsStpInTcnBpdus Gauge32
  sapTlsStpInBadBpdus Gauge32
  sapTlsStpOutConfigBpdus Gauge32
  sapTlsStpOutTcnBpdus Gauge32
  sapTlsStpOperBpduEncap INTEGER
  sapTlsVpnId VpnId
  sapTlsCustId TmnxCustId
  sapTlsMacAddressLimit Integer32
  sapTlsNumMacAddresses Integer32
  sapTlsNumStaticMacAddresses Integer32
  sapTlsMacLearning TmnxEnabledDisabled
  sapTlsMacAgeing TmnxEnabledDisabled
  sapTlsStpOperEdge TruthValue
  sapTlsStpAdminPointToPoint INTEGER
  sapTlsStpPortRole StpPortRole
  sapTlsStpAutoEdge TmnxEnabledDisabled
  sapTlsStpOperProtocol StpProtocol
  sapTlsStpInRstBpdus Gauge32
  sapTlsStpOutRstBpdus Gauge32
  sapTlsLimitMacMove TlsLimitMacMove
  sapTlsDhcpSnooping TmnxEnabledDisabled
  sapTlsMacPinning TmnxEnabledDisabled
  sapTlsDiscardUnknownSource TmnxEnabledDisabled
  sapTlsMvplsPruneState MvplsPruneState
  sapTlsMvplsMgmtService TmnxServId
  sapTlsMvplsMgmtPortId TmnxPortID
  sapTlsMvplsMgmtEncapValue TmnxEncapVal
  sapTlsArpReplyAgent INTEGER
  sapTlsStpException StpExceptionCondition
  sapTlsAuthenticationPolicy TPolicyStatementNameOrEmpty
  sapTlsL2ptTermination TmnxEnabledDisabled
  sapTlsBpduTranslation INTEGER
  sapTlsStpRootGuard TruthValue
  sapTlsStpInsideRegion TruthValue
  sapTlsEgressMcastGroup TNamedItemOrEmpty
  sapTlsStpInMstBpdus Gauge32
  sapTlsStpOutMstBpdus Gauge32
  sapTlsRestProtSrcMac TruthValue
  sapTlsRestUnprotDstMac TruthValue
  sapTlsStpRxdDesigBridge BridgeId
  sapTlsStpRootGuardViolation TruthValue
  sapTlsShcvAction INTEGER
  sapTlsShcvSrcIp IpAddress
  sapTlsShcvSrcMac MacAddress
  sapTlsShcvInterval Unsigned32
  sapTlsMvplsMgmtMsti MstiInstanceIdOrZero
  sapTlsMacMoveNextUpTime Unsigned32
  sapTlsMacMoveRateExcdLeft Unsigned32
  sapTlsRestProtSrcMacAction INTEGER
  sapTlsL2ptForceBoundary TruthValue
  sapTlsLimitMacMoveLevel TlsLimitMacMoveLevel
  sapTlsBpduTransOper INTEGER
  sapTlsDefMsapPolicy TPolicyStatementNameOrEmpty
  sapTlsL2ptProtocols L2ptProtocols
  sapTlsL2ptForceProtocols L2ptProtocols
  sapTlsPppoeMsapTrigger TruthValue
  sapTlsDhcpMsapTrigger TruthValue
  sapTlsMrpJoinTime Unsigned32
  sapTlsMrpLeaveTime Unsigned32
  sapTlsMrpLeaveAllTime Unsigned32
  sapTlsMrpPeriodicTime Unsigned32
  sapTlsMrpPeriodicEnabled TruthValue

SapAtmInfoEntry  
SEQUENCE    
  sapAtmEncapsulation INTEGER
  sapAtmIngressTrafficDescIndex AtmTrafficDescrParamIndex
  sapAtmEgressTrafficDescIndex AtmTrafficDescrParamIndex
  sapAtmOamAlarmCellHandling ServiceAdminStatus
  sapAtmOamTerminate ServiceAdminStatus
  sapAtmOamPeriodicLoopback ServiceAdminStatus

SapBaseStatsEntry  
SEQUENCE    
  sapBaseStatsIngressPchipDroppedPackets Counter64
  sapBaseStatsIngressPchipDroppedOctets Counter64
  sapBaseStatsIngressPchipOfferedHiPrioPackets Counter64
  sapBaseStatsIngressPchipOfferedHiPrioOctets Counter64
  sapBaseStatsIngressPchipOfferedLoPrioPackets Counter64
  sapBaseStatsIngressPchipOfferedLoPrioOctets Counter64
  sapBaseStatsIngressQchipDroppedHiPrioPackets Counter64
  sapBaseStatsIngressQchipDroppedHiPrioOctets Counter64
  sapBaseStatsIngressQchipDroppedLoPrioPackets Counter64
  sapBaseStatsIngressQchipDroppedLoPrioOctets Counter64
  sapBaseStatsIngressQchipForwardedInProfPackets Counter64
  sapBaseStatsIngressQchipForwardedInProfOctets Counter64
  sapBaseStatsIngressQchipForwardedOutProfPackets Counter64
  sapBaseStatsIngressQchipForwardedOutProfOctets Counter64
  sapBaseStatsEgressQchipDroppedInProfPackets Counter64
  sapBaseStatsEgressQchipDroppedInProfOctets Counter64
  sapBaseStatsEgressQchipDroppedOutProfPackets Counter64
  sapBaseStatsEgressQchipDroppedOutProfOctets Counter64
  sapBaseStatsEgressQchipForwardedInProfPackets Counter64
  sapBaseStatsEgressQchipForwardedInProfOctets Counter64
  sapBaseStatsEgressQchipForwardedOutProfPackets Counter64
  sapBaseStatsEgressQchipForwardedOutProfOctets Counter64
  sapBaseStatsCustId TmnxCustId
  sapBaseStatsIngressPchipOfferedUncoloredPackets Counter64
  sapBaseStatsIngressPchipOfferedUncoloredOctets Counter64
  sapBaseStatsAuthenticationPktsDiscarded Counter32
  sapBaseStatsAuthenticationPktsSuccess Counter32
  sapBaseStatsLastClearedTime TimeStamp

SapIngQosQueueStatsEntry  
SEQUENCE    
  sapIngQosQueueId TSapIngQueueId
  sapIngQosQueueStatsOfferedHiPrioPackets Counter64
  sapIngQosQueueStatsDroppedHiPrioPackets Counter64
  sapIngQosQueueStatsOfferedLoPrioPackets Counter64
  sapIngQosQueueStatsDroppedLoPrioPackets Counter64
  sapIngQosQueueStatsOfferedHiPrioOctets Counter64
  sapIngQosQueueStatsDroppedHiPrioOctets Counter64
  sapIngQosQueueStatsOfferedLoPrioOctets Counter64
  sapIngQosQueueStatsDroppedLoPrioOctets Counter64
  sapIngQosQueueStatsForwardedInProfPackets Counter64
  sapIngQosQueueStatsForwardedOutProfPackets Counter64
  sapIngQosQueueStatsForwardedInProfOctets Counter64
  sapIngQosQueueStatsForwardedOutProfOctets Counter64
  sapIngQosCustId TmnxCustId
  sapIngQosQueueStatsUncoloredPacketsOffered Counter64
  sapIngQosQueueStatsUncoloredOctetsOffered Counter64

SapEgrQosQueueStatsEntry  
SEQUENCE    
  sapEgrQosQueueId TSapEgrQueueId
  sapEgrQosQueueStatsForwardedInProfPackets Counter64
  sapEgrQosQueueStatsDroppedInProfPackets Counter64
  sapEgrQosQueueStatsForwardedOutProfPackets Counter64
  sapEgrQosQueueStatsDroppedOutProfPackets Counter64
  sapEgrQosQueueStatsForwardedInProfOctets Counter64
  sapEgrQosQueueStatsDroppedInProfOctets Counter64
  sapEgrQosQueueStatsForwardedOutProfOctets Counter64
  sapEgrQosQueueStatsDroppedOutProfOctets Counter64
  sapEgrQosCustId TmnxCustId

SapIngQosSchedStatsEntry  
SEQUENCE    
  sapIngQosSchedName TNamedItem
  sapIngQosSchedStatsForwardedPackets Counter64
  sapIngQosSchedStatsForwardedOctets Counter64
  sapIngQosSchedCustId TmnxCustId

SapEgrQosSchedStatsEntry  
SEQUENCE    
  sapEgrQosSchedName TNamedItem
  sapEgrQosSchedStatsForwardedPackets Counter64
  sapEgrQosSchedStatsForwardedOctets Counter64
  sapEgrQosSchedCustId TmnxCustId

SapTlsManagedVlanListEntry  
SEQUENCE    
  sapTlsMvplsMinVlanTag Unsigned32
  sapTlsMvplsMaxVlanTag Unsigned32
  sapTlsMvplsRowStatus RowStatus

SapAntiSpoofEntry  
SEQUENCE    
  sapAntiSpoofIpAddress IpAddress
  sapAntiSpoofMacAddress MacAddress

SapStaticHostEntry  
SEQUENCE    
  sapStaticHostRowStatus RowStatus
  sapStaticHostIpAddress IpAddress
  sapStaticHostMacAddress MacAddress
  sapStaticHostSubscrIdent DisplayString
  sapStaticHostSubProfile ServObjName
  sapStaticHostSlaProfile ServObjName
  sapStaticHostShcvOperState INTEGER
  sapStaticHostShcvChecks Unsigned32
  sapStaticHostShcvReplies Unsigned32
  sapStaticHostShcvReplyTime TimeStamp
  sapStaticHostDynMacAddress MacAddress
  sapStaticHostRetailerSvcId TmnxServId
  sapStaticHostRetailerIf InterfaceIndexOrZero
  sapStaticHostFwdingState TmnxOperState
  sapStaticHostAncpString DisplayString
  sapStaticHostSubIdIsSapId TruthValue
  sapStaticHostAppProfile ServObjName
  sapStaticHostIntermediateDestId DisplayString

SapTlsDhcpInfoEntry  
SEQUENCE    
  sapTlsDhcpAdminState TmnxEnabledDisabled
  sapTlsDhcpDescription ServObjDesc
  sapTlsDhcpSnoop TmnxEnabledDisabled
  sapTlsDhcpLeasePopulate Unsigned32
  sapTlsDhcpOperLeasePopulate Unsigned32
  sapTlsDhcpInfoAction INTEGER
  sapTlsDhcpCircuitId INTEGER
  sapTlsDhcpRemoteId INTEGER
  sapTlsDhcpRemoteIdString DisplayString
  sapTlsDhcpProxyAdminState TmnxEnabledDisabled
  sapTlsDhcpProxyServerAddr IpAddress
  sapTlsDhcpProxyLeaseTime Unsigned32
  sapTlsDhcpProxyLTRadiusOverride TruthValue
  sapTlsDhcpVendorIncludeOptions BITS
  sapTlsDhcpVendorOptionString DisplayString

SapTlsDhcpStatsEntry  
SEQUENCE    
  sapTlsDhcpStatsClntSnoopdPckts Counter32
  sapTlsDhcpStatsSrvrSnoopdPckts Counter32
  sapTlsDhcpStatsClntForwdPckts Counter32
  sapTlsDhcpStatsSrvrForwdPckts Counter32
  sapTlsDhcpStatsClntDropdPckts Counter32
  sapTlsDhcpStatsSrvrDropdPckts Counter32
  sapTlsDhcpStatsClntProxRadPckts Counter32
  sapTlsDhcpStatsClntProxLSPckts Counter32
  sapTlsDhcpStatsGenReleasePckts Counter32
  sapTlsDhcpStatsGenForceRenPckts Counter32

SapTlsDhcpLeaseStateEntry  
SEQUENCE    
  sapTlsDhcpLseStateCiAddr IpAddress
  sapTlsDhcpLseStateChAddr MacAddress
  sapTlsDhcpLseStateRemainLseTime Unsigned32
  sapTlsDhcpLseStateOption82 OCTET STRING
  sapTlsDhcpLseStatePersistKey Unsigned32

SapPortIdIngQosSchedStatsEntry  
SEQUENCE    
  sapPortIdIngQosSchedName TNamedItem
  sapPortIdIngPortId TmnxPortID
  sapPortIdIngQosSchedFwdPkts Counter64
  sapPortIdIngQosSchedFwdOctets Counter64
  sapPortIdIngQosSchedCustId TmnxCustId

SapPortIdEgrQosSchedStatsEntry  
SEQUENCE    
  sapPortIdEgrQosSchedName TNamedItem
  sapPortIdEgrPortId TmnxPortID
  sapPortIdEgrQosSchedFwdPkts Counter64
  sapPortIdEgrQosSchedFwdOctets Counter64
  sapPortIdEgrQosSchedCustId TmnxCustId

SapIngQosQueueInfoEntry  
SEQUENCE    
  sapIngQosQId TIngressQueueId
  sapIngQosQRowStatus RowStatus
  sapIngQosQLastMgmtChange TimeStamp
  sapIngQosQOverrideFlags TQosQueueAttribute
  sapIngQosQCBS TBurstSize
  sapIngQosQMBS TBurstSize
  sapIngQosQHiPrioOnly TBurstPercentOrDefault
  sapIngQosQCIRAdaptation TAdaptationRule
  sapIngQosQPIRAdaptation TAdaptationRule
  sapIngQosQAdminPIR TPIRRate
  sapIngQosQAdminCIR TCIRRate

SapEgrQosQueueInfoEntry  
SEQUENCE    
  sapEgrQosQId TEgressQueueId
  sapEgrQosQRowStatus RowStatus
  sapEgrQosQLastMgmtChange TimeStamp
  sapEgrQosQOverrideFlags TQosQueueAttribute
  sapEgrQosQCBS TBurstSize
  sapEgrQosQMBS TBurstSize
  sapEgrQosQHiPrioOnly TBurstPercentOrDefault
  sapEgrQosQCIRAdaptation TAdaptationRule
  sapEgrQosQPIRAdaptation TAdaptationRule
  sapEgrQosQAdminPIR TPIRRate
  sapEgrQosQAdminCIR TCIRRate
  sapEgrQosQAvgOverhead Unsigned32

SapIngQosSchedInfoEntry  
SEQUENCE    
  sapIngQosSName TNamedItem
  sapIngQosSRowStatus RowStatus
  sapIngQosSLastMgmtChange TimeStamp
  sapIngQosSOverrideFlags TVirtSchedAttribute
  sapIngQosSPIR TPIRRate
  sapIngQosSCIR TCIRRate
  sapIngQosSSummedCIR TruthValue

SapEgrQosSchedInfoEntry  
SEQUENCE    
  sapEgrQosSName TNamedItem
  sapEgrQosSRowStatus RowStatus
  sapEgrQosSLastMgmtChange TimeStamp
  sapEgrQosSOverrideFlags TVirtSchedAttribute
  sapEgrQosSPIR TPIRRate
  sapEgrQosSCIR TCIRRate
  sapEgrQosSSummedCIR TruthValue

SapSubMgmtInfoEntry  
SEQUENCE    
  sapSubMgmtAdminStatus TmnxEnabledDisabled
  sapSubMgmtDefSubProfile ServObjName
  sapSubMgmtDefSlaProfile ServObjName
  sapSubMgmtSubIdentPolicy ServObjName
  sapSubMgmtSubscriberLimit Unsigned32
  sapSubMgmtProfiledTrafficOnly TruthValue
  sapSubMgmtNonSubTrafficSubIdent DisplayString
  sapSubMgmtNonSubTrafficSubProf ServObjName
  sapSubMgmtNonSubTrafficSlaProf ServObjName
  sapSubMgmtMacDaHashing TruthValue
  sapSubMgmtDefSubIdent INTEGER
  sapSubMgmtDefSubIdentString DisplayString
  sapSubMgmtDefAppProfile ServObjName
  sapSubMgmtNonSubTrafficAppProf ServObjName

SapTlsMstiEntry  
SEQUENCE    
  sapTlsMstiPriority Integer32
  sapTlsMstiPathCost INTEGER
  sapTlsMstiLastMgmtChange TimeStamp
  sapTlsMstiPortRole StpPortRole
  sapTlsMstiPortState TStpPortState
  sapTlsMstiDesignatedBridge BridgeId
  sapTlsMstiDesignatedPort Integer32

SapIpipeInfoEntry  
SEQUENCE    
  sapIpipeCeInetAddressType InetAddressType
  sapIpipeCeInetAddress InetAddress
  sapIpipeMacRefreshInterval Unsigned32
  sapIpipeMacAddress MacAddress
  sapIpipeArpedMacAddress MacAddress
  sapIpipeArpedMacAddressTimeout Unsigned32

SapTodMonitorEntry  
SEQUENCE    
  sapCurrentIngressIpFilterId TFilterID
  sapCurrentIngressIpv6FilterId TFilterID
  sapCurrentIngressMacFilterId TFilterID
  sapCurrentIngressQosPolicyId TSapIngressPolicyID
  sapCurrentIngressQosSchedPlcy ServObjName
  sapCurrentEgressIpFilterId TFilterID
  sapCurrentEgressIpv6FilterId TFilterID
  sapCurrentEgressMacFilterId TFilterID
  sapCurrentEgressQosPolicyId TSapEgressPolicyID
  sapCurrentEgressQosSchedPlcy ServObjName
  sapIntendedIngressIpFilterId TFilterID
  sapIntendedIngressIpv6FilterId TFilterID
  sapIntendedIngressMacFilterId TFilterID
  sapIntendedIngressQosPolicyId TSapIngressPolicyID
  sapIntendedIngressQosSchedPlcy ServObjName
  sapIntendedEgressIpFilterId TFilterID
  sapIntendedEgressIpv6FilterId TFilterID
  sapIntendedEgressMacFilterId TFilterID
  sapIntendedEgressQosPolicyId TSapEgressPolicyID
  sapIntendedEgressQosSchedPlcy ServObjName

SapIngrQosPlcyStatsEntry  
SEQUENCE    
  sapIgQosPlcyId TSapIngressPolicyID
  sapIgQosPlcyDroppedHiPrioPackets Counter64
  sapIgQosPlcyDroppedHiPrioOctets Counter64
  sapIgQosPlcyDroppedLoPrioPackets Counter64
  sapIgQosPlcyDroppedLoPrioOctets Counter64
  sapIgQosPlcyForwardedInProfPackets Counter64
  sapIgQosPlcyForwardedInProfOctets Counter64
  sapIgQosPlcyForwardedOutProfPackets Counter64
  sapIgQosPlcyForwardedOutProfOctets Counter64

SapEgrQosPlcyStatsEntry  
SEQUENCE    
  sapEgQosPlcyId TSapEgressPolicyID
  sapEgQosPlcyDroppedInProfPackets Counter64
  sapEgQosPlcyDroppedInProfOctets Counter64
  sapEgQosPlcyDroppedOutProfPackets Counter64
  sapEgQosPlcyDroppedOutProfOctets Counter64
  sapEgQosPlcyForwardedInProfPackets Counter64
  sapEgQosPlcyForwardedInProfOctets Counter64
  sapEgQosPlcyForwardedOutProfPackets Counter64
  sapEgQosPlcyForwardedOutProfOctets Counter64

SapIngQosPlcyQueueStatsEntry  
SEQUENCE    
  sapIgQosPlcyQueuePlcyId TSapIngressPolicyID
  sapIgQosPlcyQueueId TSapIngQueueId
  sapIgQosPlcyQueueStatsOfferedHiPrioPackets Counter64
  sapIgQosPlcyQueueStatsDroppedHiPrioPackets Counter64
  sapIgQosPlcyQueueStatsOfferedLoPrioPackets Counter64
  sapIgQosPlcyQueueStatsDroppedLoPrioPackets Counter64
  sapIgQosPlcyQueueStatsOfferedHiPrioOctets Counter64
  sapIgQosPlcyQueueStatsDroppedHiPrioOctets Counter64
  sapIgQosPlcyQueueStatsOfferedLoPrioOctets Counter64
  sapIgQosPlcyQueueStatsDroppedLoPrioOctets Counter64
  sapIgQosPlcyQueueStatsForwardedInProfPackets Counter64
  sapIgQosPlcyQueueStatsForwardedOutProfPackets Counter64
  sapIgQosPlcyQueueStatsForwardedInProfOctets Counter64
  sapIgQosPlcyQueueStatsForwardedOutProfOctets Counter64
  sapIgQosPlcyQueueCustId TmnxCustId
  sapIgQosPlcyQueueStatsUncoloredPacketsOffered Counter64
  sapIgQosPlcyQueueStatsUncoloredOctetsOffered Counter64

SapEgrQosPlcyQueueStatsEntry  
SEQUENCE    
  sapEgQosPlcyQueuePlcyId TSapEgressPolicyID
  sapEgQosPlcyQueueId TSapEgrQueueId
  sapEgQosPlcyQueueStatsForwardedInProfPackets Counter64
  sapEgQosPlcyQueueStatsDroppedInProfPackets Counter64
  sapEgQosPlcyQueueStatsForwardedOutProfPackets Counter64
  sapEgQosPlcyQueueStatsDroppedOutProfPackets Counter64
  sapEgQosPlcyQueueStatsForwardedInProfOctets Counter64
  sapEgQosPlcyQueueStatsDroppedInProfOctets Counter64
  sapEgQosPlcyQueueStatsForwardedOutProfOctets Counter64
  sapEgQosPlcyQueueStatsDroppedOutProfOctets Counter64
  sapEgQosPlcyQueueCustId TmnxCustId

SapDhcpInfoEntry  
SEQUENCE    
  sapDhcpOperLeasePopulate Unsigned32

SapIngSchedPlcyStatsEntry  
SEQUENCE    
  sapIngSchedPlcyStatsFwdPkt Counter64
  sapIngSchedPlcyStatsFwdOct Counter64

SapEgrSchedPlcyStatsEntry  
SEQUENCE    
  sapEgrSchedPlcyStatsFwdPkt Counter64
  sapEgrSchedPlcyStatsFwdOct Counter64

SapIngSchedPlcyPortStatsEntry  
SEQUENCE    
  sapIngSchedPlcyPortStatsPort TmnxPortID
  sapIngSchedPlcyPortStatsFwdPkt Counter64
  sapIngSchedPlcyPortStatsFwdOct Counter64

SapEgrSchedPlcyPortStatsEntry  
SEQUENCE    
  sapEgrSchedPlcyPortStatsPort TmnxPortID
  sapEgrSchedPlcyPortStatsFwdPkt Counter64
  sapEgrSchedPlcyPortStatsFwdOct Counter64

SapCemInfoEntry  
SEQUENCE    
  sapCemLastMgmtChange TimeStamp
  sapCemEndpointType INTEGER
  sapCemBitrate Unsigned32
  sapCemCasTrunkFraming TdmOptionsCasTrunkFraming
  sapCemPayloadSize Unsigned32
  sapCemJitterBuffer Unsigned32
  sapCemUseRtpHeader TruthValue
  sapCemDifferential TruthValue
  sapCemTimestampFreq Unsigned32
  sapCemReportAlarm CemSapReportAlarm
  sapCemReportAlarmStatus CemSapReportAlarm
  sapCemLocalEcid CemSapEcid
  sapCemRemoteMacAddr MacAddress
  sapCemRemoteEcid CemSapEcid

SapCemStatsEntry  
SEQUENCE    
  sapCemStatsIngressForwardedPkts Counter32
  sapCemStatsIngressDroppedPkts Counter32
  sapCemStatsEgressForwardedPkts Counter32
  sapCemStatsEgressDroppedPkts Counter32
  sapCemStatsEgressMissingPkts Counter32
  sapCemStatsEgressPktsReOrder Counter32
  sapCemStatsEgressJtrBfrUnderruns Counter32
  sapCemStatsEgressJtrBfrOverruns Counter32
  sapCemStatsEgressMisOrderDropped Counter32
  sapCemStatsEgressMalformedPkts Counter32
  sapCemStatsEgressLBitDropped Counter32
  sapCemStatsEgressMultipleDropped Counter32
  sapCemStatsEgressESs Counter32
  sapCemStatsEgressSESs Counter32
  sapCemStatsEgressUASs Counter32
  sapCemStatsEgressFailureCounts Counter32
  sapCemStatsEgressUnderrunCounts Counter32
  sapCemStatsEgressOverrunCounts Counter32

SapTlsL2ptStatsEntry  
SEQUENCE    
  sapTlsL2ptStatsLastClearedTime TimeStamp
  sapTlsL2ptStatsL2ptEncapStpConfigBpdusRx Counter32
  sapTlsL2ptStatsL2ptEncapStpConfigBpdusTx Counter32
  sapTlsL2ptStatsL2ptEncapStpRstBpdusRx Counter32
  sapTlsL2ptStatsL2ptEncapStpRstBpdusTx Counter32
  sapTlsL2ptStatsL2ptEncapStpTcnBpdusRx Counter32
  sapTlsL2ptStatsL2ptEncapStpTcnBpdusTx Counter32
  sapTlsL2ptStatsL2ptEncapPvstConfigBpdusRx Counter32
  sapTlsL2ptStatsL2ptEncapPvstConfigBpdusTx Counter32
  sapTlsL2ptStatsL2ptEncapPvstRstBpdusRx Counter32
  sapTlsL2ptStatsL2ptEncapPvstRstBpdusTx Counter32
  sapTlsL2ptStatsL2ptEncapPvstTcnBpdusRx Counter32
  sapTlsL2ptStatsL2ptEncapPvstTcnBpdusTx Counter32
  sapTlsL2ptStatsStpConfigBpdusRx Counter32
  sapTlsL2ptStatsStpConfigBpdusTx Counter32
  sapTlsL2ptStatsStpRstBpdusRx Counter32
  sapTlsL2ptStatsStpRstBpdusTx Counter32
  sapTlsL2ptStatsStpTcnBpdusRx Counter32
  sapTlsL2ptStatsStpTcnBpdusTx Counter32
  sapTlsL2ptStatsPvstConfigBpdusRx Counter32
  sapTlsL2ptStatsPvstConfigBpdusTx Counter32
  sapTlsL2ptStatsPvstRstBpdusRx Counter32
  sapTlsL2ptStatsPvstRstBpdusTx Counter32
  sapTlsL2ptStatsPvstTcnBpdusRx Counter32
  sapTlsL2ptStatsPvstTcnBpdusTx Counter32
  sapTlsL2ptStatsOtherBpdusRx Counter32
  sapTlsL2ptStatsOtherBpdusTx Counter32
  sapTlsL2ptStatsOtherL2ptBpdusRx Counter32
  sapTlsL2ptStatsOtherL2ptBpdusTx Counter32
  sapTlsL2ptStatsOtherInvalidBpdusRx Counter32
  sapTlsL2ptStatsOtherInvalidBpdusTx Counter32
  sapTlsL2ptStatsL2ptEncapCdpBpdusRx Counter32
  sapTlsL2ptStatsL2ptEncapCdpBpdusTx Counter32
  sapTlsL2ptStatsL2ptEncapVtpBpdusRx Counter32
  sapTlsL2ptStatsL2ptEncapVtpBpdusTx Counter32
  sapTlsL2ptStatsL2ptEncapDtpBpdusRx Counter32
  sapTlsL2ptStatsL2ptEncapDtpBpdusTx Counter32
  sapTlsL2ptStatsL2ptEncapPagpBpdusRx Counter32
  sapTlsL2ptStatsL2ptEncapPagpBpdusTx Counter32
  sapTlsL2ptStatsL2ptEncapUdldBpdusRx Counter32
  sapTlsL2ptStatsL2ptEncapUdldBpdusTx Counter32
  sapTlsL2ptStatsCdpBpdusRx Counter32
  sapTlsL2ptStatsCdpBpdusTx Counter32
  sapTlsL2ptStatsVtpBpdusRx Counter32
  sapTlsL2ptStatsVtpBpdusTx Counter32
  sapTlsL2ptStatsDtpBpdusRx Counter32
  sapTlsL2ptStatsDtpBpdusTx Counter32
  sapTlsL2ptStatsPagpBpdusRx Counter32
  sapTlsL2ptStatsPagpBpdusTx Counter32
  sapTlsL2ptStatsUdldBpdusRx Counter32
  sapTlsL2ptStatsUdldBpdusTx Counter32

SapEthernetInfoEntry  
SEQUENCE    
  sapEthernetLLFAdminStatus ServiceAdminStatus
  sapEthernetLLFOperStatus INTEGER

MsapPlcyEntry  
SEQUENCE    
  msapPlcyName TNamedItem
  msapPlcyRowStatus RowStatus
  msapPlcyLastChanged TimeStamp
  msapPlcyDescription TItemDescription
  msapPlcyCpmProtPolicyId TCpmProtPolicyID
  msapPlcyCpmProtMonitorMac TruthValue
  msapPlcySubMgmtDefSubId INTEGER
  msapPlcySubMgmtDefSubIdStr TNamedItemOrEmpty
  msapPlcySubMgmtDefSubProfile TNamedItemOrEmpty
  msapPlcySubMgmtDefSlaProfile TNamedItemOrEmpty
  msapPlcySubMgmtDefAppProfile TNamedItemOrEmpty
  msapPlcySubMgmtSubIdPlcy TPolicyStatementNameOrEmpty
  msapPlcySubMgmtSubscriberLimit Unsigned32
  msapPlcySubMgmtProfiledTrafOnly TruthValue
  msapPlcySubMgmtNonSubTrafSubId TNamedItemOrEmpty
  msapPlcySubMgmtNonSubTrafSubProf TNamedItemOrEmpty
  msapPlcySubMgmtNonSubTrafSlaProf TNamedItemOrEmpty
  msapPlcySubMgmtNonSubTrafAppProf TNamedItemOrEmpty
  msapPlcyAssociatedMsaps Counter32

MsapTlsPlcyEntry  
SEQUENCE    
  msapTlsPlcyLastChanged TimeStamp
  msapTlsPlcySplitHorizonGrp TNamedItemOrEmpty
  msapTlsPlcyArpReplyAgent INTEGER
  msapTlsPlcySubMgmtMacDaHashing TruthValue
  msapTlsPlcyDhcpLeasePopulate Unsigned32
  msapTlsPlcyDhcpPrxyAdminState TmnxEnabledDisabled
  msapTlsPlcyDhcpPrxyServAddrType InetAddressType
  msapTlsPlcyDhcpPrxyServAddr InetAddress
  msapTlsPlcyDhcpPrxyLeaseTime Unsigned32
  msapTlsPlcyDhcpPrxyLTRadOverride TruthValue
  msapTlsPlcyDhcpInfoAction INTEGER
  msapTlsPlcyDhcpCircuitId INTEGER
  msapTlsPlcyDhcpRemoteId INTEGER
  msapTlsPlcyDhcpRemoteIdString TNamedItemOrEmpty
  msapTlsPlcyDhcpVendorInclOpts BITS
  msapTlsPlcyDhcpVendorOptStr TNamedItemOrEmpty
  msapTlsPlcyEgressMcastGroup TNamedItemOrEmpty
  msapTlsPlcyIgmpSnpgImportPlcy TPolicyStatementNameOrEmpty
  msapTlsPlcyIgmpSnpgFastLeave TmnxEnabledDisabled
  msapTlsPlcyIgmpSnpgSendQueries TmnxEnabledDisabled
  msapTlsPlcyIgmpSnpgGenQueryIntv Unsigned32
  msapTlsPlcyIgmpSnpgQueryRespIntv Unsigned32
  msapTlsPlcyIgmpSnpgRobustCount Unsigned32
  msapTlsPlcyIgmpSnpgLastMembIntvl Unsigned32
  msapTlsPlcyIgmpSnpgMaxNbrGrps Unsigned32
  msapTlsPlcyIgmpSnpgMvrFromVplsId TmnxServId
  msapTlsPlcyIgmpSnpgVersion TmnxIgmpVersion
  msapTlsPlcyIgmpSnpgMcacPlcyName TPolicyStatementNameOrEmpty
  msapTlsPlcyIgmpSnpgMcacUncnstBW Integer32
  msapTlsPlcyIgmpSnpgMcacPrRsvMnBW Integer32

MSapIgmpSnpgMcacLevelEntry  
SEQUENCE    
  msapIgmpSnpgMcacLevelId Unsigned32
  msapIgmpSnpgMcacLevelRowStatus RowStatus
  msapIgmpSnpgMcacLevelLastChanged TimeStamp
  msapIgmpSnpgMcacLevelBW Unsigned32

MSapIgmpSnpgMcacLagEntry  
SEQUENCE    
  msapIgmpSnpgMcacLagPortsDown Unsigned32
  msapIgmpSnpgMcacLagRowStatus RowStatus
  msapIgmpSnpgMcacLagLastChanged TimeStamp
  msapIgmpSnpgMcacLagLevel Unsigned32

MSapInfoEntry  
SEQUENCE    
  msapInfoCreationSapPortEncapVal TmnxEncapVal
  msapInfoCreationPlcyName TNamedItem
  msapInfoReEvalPolicy TmnxActionType
  msapInfoLastChanged TimeStamp

MSapCaptureSapStatsEntry  
SEQUENCE    
  msapCaptureSapStatsTriggerType INTEGER
  msapCaptureSapStatsPktsRecvd Counter32
  msapCaptureSapStatsPktsRedirect Counter32
  msapCaptureSapStatsPktsDropped Counter32

SapTlsMrpEntry  
SEQUENCE    
  sapTlsMrpRxPdus Counter32
  sapTlsMrpDroppedPdus Counter32
  sapTlsMrpTxPdus Counter32
  sapTlsMrpRxNewEvent Counter32
  sapTlsMrpRxJoinInEvent Counter32
  sapTlsMrpRxInEvent Counter32
  sapTlsMrpRxJoinEmptyEvent Counter32
  sapTlsMrpRxEmptyEvent Counter32
  sapTlsMrpRxLeaveEvent Counter32
  sapTlsMrpTxNewEvent Counter32
  sapTlsMrpTxJoinInEvent Counter32
  sapTlsMrpTxInEvent Counter32
  sapTlsMrpTxJoinEmptyEvent Counter32
  sapTlsMrpTxEmptyEvent Counter32
  sapTlsMrpTxLeaveEvent Counter32

SapTlsMmrpEntry  
SEQUENCE    
  sapTlsMmrpMacAddr MacAddress
  sapTlsMmrpDeclared TruthValue
  sapTlsMmrpRegistered TruthValue

Defined Values

timetraSvcSapMIBModule 1.3.6.1.4.1.6527.1.1.3.55
This document is the SNMP MIB module to manage and provision the various services of the Alcatel 7x50 SR system. Copyright 2003-2008 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel's proprietary intellectual property. Alcatel retains all title and ownership in the Specification, including any revisions. Alcatel grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied `as is', and Alcatel makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
MODULE-IDENTITY    

tmnxSapObjs 1.3.6.1.4.1.6527.3.1.2.4.3
OBJECT IDENTIFIER    

tmnxSapNotifyObjs 1.3.6.1.4.1.6527.3.1.2.4.3.100
OBJECT IDENTIFIER    

tmnxSapConformance 1.3.6.1.4.1.6527.3.1.1.4.3
OBJECT IDENTIFIER    

sapTrapsPrefix 1.3.6.1.4.1.6527.3.1.3.4.3
OBJECT IDENTIFIER    

sapTraps 1.3.6.1.4.1.6527.3.1.3.4.3.0
OBJECT IDENTIFIER    

sapNumEntries 1.3.6.1.4.1.6527.3.1.2.4.3.1
The current number of SAPs configured in this device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sapBaseInfoTable 1.3.6.1.4.1.6527.3.1.2.4.3.2
A table that contains basic SAP information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapBaseInfoEntry

sapBaseInfoEntry 1.3.6.1.4.1.6527.3.1.2.4.3.2.1
Information about a specific SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapBaseInfoEntry  

sapPortId 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.1
The ID of the access port where this SAP is defined.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxPortID  

sapEncapValue 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.2
The value of the label used to identify this SAP on the access port specified by sapPortId.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxEncapVal  

sapRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.3
This object indicates the status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sapType 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.4
This object indicates the type of service where this SAP is defined.
Status: current Access: read-only
OBJECT-TYPE    
  ServType  

sapDescription 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.5
Generic information about this SAP.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjDesc  

sapAdminStatus 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.6
The desired state of this SAP.
Status: current Access: read-create
OBJECT-TYPE    
  ServiceAdminStatus  

sapOperStatus 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.7
The value of the object sapOperStatus indicates the operating state of this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), ingressQosMismatch(3), egressQosMismatch(4), portMtuTooSmall(5), svcAdminDown(6), iesIfAdminDown(7)  

sapIngressQosPolicyId 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.8
The value of the object sapIngressQosPolicyId specifies the row index in the tSapIngressTable corresponding to this ingress QoS policy, or one if no policy is specified. The value 0 is needed for mirror SAPs that cannot have a qos policy assigned.
Status: current Access: read-create
OBJECT-TYPE    
  TSapIngressPolicyID  

sapIngressMacFilterId 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.9
The value of the object sapIngressMacFilterId specifies the row index in the tMacFilterTable corresponding to this ingress filter, or zero if no filter is specified.
Status: current Access: read-create
OBJECT-TYPE    
  TFilterID  

sapIngressIpFilterId 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.10
The value of the object sapIngressIpFilterId specifies the row index in the tIPFilterTable corresponding to this ingress filter, or zero if no filter is specified.
Status: current Access: read-create
OBJECT-TYPE    
  TFilterID  

sapEgressQosPolicyId 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.11
The row index in the tSapEgressTable corresponding to this egress QoS policy, or one if no policy is specified.
Status: current Access: read-create
OBJECT-TYPE    
  TSapEgressPolicyID  

sapEgressMacFilterId 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.12
The row index in the tMacFilterTable corresponding to this egress filter, or zero if no filter is specified.
Status: current Access: read-create
OBJECT-TYPE    
  TFilterID  

sapEgressIpFilterId 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.13
The row index in the tIPFilterTable corresponding to this egress filter, or zero if no filter is specified.
Status: current Access: read-create
OBJECT-TYPE    
  TFilterID  

sapMirrorStatus 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.14
This object specifies whether traffic mirroring has been enabled on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ingress(1), egress(2), ingressAndEgress(3), disabled(4)  

sapIesIfIndex 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.15
When the value of sapType is 'ies' this object specifies the index of the IES interface where this SAP is defined. The value of this object can be set only when the row is created and cannot be changed while the row status is 'active'. This object is otherwise not significant and should have the value zero.
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceIndexOrZero  

sapLastMgmtChange 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.16
The value of sysUpTime at the time of the most recent management-initiated change to this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapCollectAcctStats 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.17
When the value of this object is 'true' the agent collects accounting statistics on this SAP.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapAccountingPolicyId 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.18
This object specifies the policy to use to collect accounting statistics on this SAP. The value zero indicates that the agent should use the default accounting policy, if one exists.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

sapVpnId 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.19
The VPN ID of the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  VpnId  

sapCustId 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.20
The Customer ID of the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapCustMultSvcSite 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.21
The value of this object, when not null, indicates the Multi-Service Site this SAP is a member of. This information is used to configure the ingress and egress QoS schedulers for this SAP.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapIngressQosSchedulerPolicy 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.22
This object can be set only when sapCustMultSvcSite is null. It indicates the ingress QoS scheduler for this SAP.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapEgressQosSchedulerPolicy 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.23
This object can be set only when sapCustMultSvcSite is null. It indicates the egress QoS scheduler for this SAP.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapSplitHorizonGrp 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.24
This object specifies the name of the split-horizon group where the SAP belongs to. This object can be set only at the time the row is created. Per default a SAP does not belong to any split-horizon group. The name specified must correspond to an existing split- horizon group in the TLS service where this SAP is defined.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapIngressSharedQueuePolicy 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.25
This object indicates the ingress shared queue policy used by this SAP. When the value of this object is null it means that the SAP will use individual ingress QoS queues, instead of the shared ones.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapIngressMatchQinQDot1PBits 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.26
This object applies only to SAP's defined on a port configured for qinq service encapsulation. It indicates which 802.1P bits will be used to match a QoS or a MAC filter policy when a double-tagged frame is received on this SAP.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER default(1), top(2), bottom(3)  

sapOperFlags 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.27
This object specifies all the conditions that affect the operating status of this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  BITS sapAdminDown(0), svcAdminDown(1), iesIfAdminDown(2), portOperDown(3), portMtuTooSmall(4), l2OperDown(5), ingressQosMismatch(6), egressQosMismatch(7), relearnLimitExceeded(8), recProtSrcMac(9), subIfAdminDown(10), sapIpipeNoCeIpAddr(11), sapTodResourceUnavail(12), sapTodMssResourceUnavail(13), sapParamMismatch(14), sapCemNoEcidOrMacAddr(15), sapStandbyForMcRing(16), sapSvcMtuTooSmall(17), ingressNamedPoolMismatch(18), egressNamedPoolMismatch(19), ipMirrorNoMacAddr(20), sapEpipeNoRingNode(21)  

sapLastStatusChange 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.28
The value of sysUpTime at the time of the most recent operating status change to this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapAntiSpoofing 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.29
The value of the object sapAntiSpoofing specifies the type of anti-spoof filtering applicable on this SAP. 'nextHopIpAndMacAddr (4)' is not supported on SR-1, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5'.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disabled(0), sourceIpAddr(1), sourceMacAddr(2), sourceIpAndMacAddr(3), nextHopIpAndMacAddr(4)  

sapIngressIpv6FilterId 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.30
The value of the object sapIngressIpv6FilterId specifies the row index in the tIPv6FilterTable corresponding to this ingress ipv6 filter, or zero if no ipv6 filter is specified.
Status: current Access: read-create
OBJECT-TYPE    
  TFilterID  

sapEgressIpv6FilterId 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.31
The value of the object sapEgressIpv6FilterId specifies the row index in the tIPv6FilterTable corresponding to this egress ipv6 filter, or zero if no ipv6 filter is specified.
Status: current Access: read-create
OBJECT-TYPE    
  TFilterID  

sapTodSuite 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.32
The value of the object sapTodSuite specifies the Time of Day (ToD) suite to be applied on this SAP. An empty string indicates that no ToD suite is applied on this SAP. A set request will only be allowed, if the indicated suite is defined in TIMETRA-SCHEDULER-MIB::tmnxTodSuiteTable.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

sapIngUseMultipointShared 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.33
When the value of sapIngressSharedQueuePolicy is not null, the value of the object sapIngUseMultipointShared specifies whether this SAP uses the multipoint-shared queues of the shared policy.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapEgressQinQMarkTopOnly 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.34
When the encapsulation type of the access port where this SAP is defined is qinq, the value of the object sapEgressQinQMarkTopOnly specifies which P-bits to mark during packet egress. When the value is false both set of P-bits are marked. When the value is true, only the P-bits in the top Q-tag are marked.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapEgressAggRateLimit 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.35
The value of the object sapEgressAggRateLimit specifies the maximum total rate of all egress queues for this SAP. The value '-1' means that there is no limit.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerPIR  

sapEndPoint 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.36
The value of the object sapEndPoint specifies the service endpoint to which this SAP is attached. The svcId of the SAP MUST match the svcId of the service endpoint.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapIngressVlanTranslation 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.37
The value of sapIngressVlanTranslation specifies the desired Ingress Vlan Translation. A value of 'vlanId' specifies that the value of sapIngressVlanTranslationId is to be used to overwrite the preserved VLAN id in the packet. A value of 'copyOuter' specifies that the outer VLAN id should be used to overwrite the preserved VLAN id in the packet. An 'inconsistentValue' error is returned when an attempt is made to set the value of sapIngressVlanTranslation to 'vlanId' and sapIngressVlanTranslationId is set to '-1'.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(1), vlanId(2), copyOuter(3)  

sapIngressVlanTranslationId 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.38
The value of sapIngressVlanTranslationId specifies the VLAN id to be used to overwrite the preserved VLAN id in the packet. An 'inconsistentValue' error is returned when an attempt is made to set the value of sapIngressVlanTranslationId to other than '-1' and sapIngressVlanTranslation is not set to 'vlanId'.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1 | 0..4094  

sapSubType 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.39
The value of the object sapSubType indicates the sub-type for this SAP. A value of 'regular' indicates a standard SAP. A value of 'capture' specifies a capturing SAP in which triggering packets will be sent to the CPM. Non-triggering packets captured by the 'capture' SAP will be dropped. A value of 'managed' indicates a managed SAP which was created dynamically after receiving triggering packets on a SAP with a sapSubType value of 'capture'. Entries with a value of 'managed' are not user editable and are not maintained in the configuration file. Whereas any of the three values may be returned in in response to an SNMP GET request, only two values may be specified in an SNMP SET request: 'regular' and 'capture'. An attempt to specify a value of 'managed' in an SNMP SET request will fail with an error of 'wrongValue'. The value of this object cannot be changed after creation.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER regular(0), capture(1), managed(2)  

sapCpmProtPolicyId 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.40
The value of sapCpmProtPolicyId associates a CPM Protection policy with a SAP. A value of zero (0) specifies that no CPM Protection policy is associated with this SAP. A value of one (1) specifies that the default CPM Protection policy is associated with this SAP. If no value for sapCpmProtPolicyId is specified when the sapBaseInfoEntry is created, the system assigns a default value as follows: if the system creates a corresponding entry in the sapSubMgmtInfoTable, the default value is 'one'; otherwise, the default value is 'zero'. This means that all SAP's that support Enhanced Subscriber Management get a default value of 'one'. If a SAP would get a default value of 'one', it is not allowed to set the value of sapCpmProtPolicyId to 'zero'. If a SAP would get a default value of 'zero', it is not allowed to modify the value of sapCpmProtPolicyId. This object is not supported on SR-1 and ESS-1, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5', and 7710, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'.
Status: current Access: read-create
OBJECT-TYPE    
  TCpmProtPolicyID  

sapCpmProtMonitorMac 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.41
The value of sapCpmProtMonitorMac specifies whether the tmnxCpmProtPolPerSrcRateLimit of the CPM Protection policy must be applied. If the value of sapCpmProtMonitorMac is 'true', the per-source rate limit must be applied. If the value of sapCpmProtPolicyId is equal to zero (0), the value of sapCpmProtMonitorMac is irrelevant and will be ignored. This object is not supported on SR-1 and ESS-1, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5', and 7710, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapEgressFrameBasedAccounting 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.42
The value of sapEgressFrameBasedAccounting specifies whether to use frame-based accounting when evaluating sapEgressAggRateLimit for all egress queues for this SAP. If the value is 'false', the default packet-based accounting method will be used.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapTlsInfoTable 1.3.6.1.4.1.6527.3.1.2.4.3.3
A table that contains TLS SAP information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapTlsInfoEntry

sapTlsInfoEntry 1.3.6.1.4.1.6527.3.1.2.4.3.3.1
TLS specific information about a SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapTlsInfoEntry  

sapTlsStpAdminStatus 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.1
The value of the object sapTlsStpAdminStatus specifies whether this SAP participates in the TLS's Spanning Tree Protocol.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapTlsStpPriority 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.2
The value of the object sapTlsStpPriority specifies the value of the port priority field which is contained in the most significant 4 bits of the 16-bit Port ID associated with this SAP. As only the most significant 4 bits of the value are used, the actual value of this object is limited to multiples of 16: e.g. the agent rounds down the value to one of: 0, 16, 32, .. , 224, 240.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

sapTlsStpPortNum 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.3
The value of the object sapTlsStpPortNum specifies the value of the port number field which is contained in the least significant 12 bits of the 16-bit Port ID associated with this SAP. Values in the range 2048..4094 are automatically assigned by the agent when the SAP is created or when the value of this object is set to zero via management. Values in the range 1..2047 can be set via management, to allow this object to have a deterministic value across system reboots.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..4094  

sapTlsStpPathCost 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.4
The value of the object sapTlsStpPathCost specifies the contribution of this port to the path cost of paths towards the spanning tree root which include this port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..200000000  

sapTlsStpRapidStart 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.5
The value of the object sapTlsStpRapidStart specifies whether Rapid Start is enabled on this SAP. When the value is 'enabled' the Spanning Tree Protocol state transitions on this SAP are driven by the value of the 'HelloTime' instead of the value of 'ForwardDelay', thus allowing a faster transition into the forwarding state. This parameter is also referred to as 'adminEdge'.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapTlsStpBpduEncap 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.6
The value of the object sapTlsStpBpduEncap specifies the type of encapsulation used on BPDUs sent out and received on this SAP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dynamic(1), dot1d(2), pvst(3)  

sapTlsStpPortState 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.7
The value of the object sapTlsStpPortState indicates the port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the 'broken' state.
Status: current Access: read-only
OBJECT-TYPE    
  TStpPortState  

sapTlsStpDesignatedBridge 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.8
The value of the object sapTlsStpDesignatedBridge indicates the Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
Status: current Access: read-only
OBJECT-TYPE    
  BridgeId  

sapTlsStpDesignatedPort 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.9
The value of the object sapTlsStpDesignatedPort indicates the Port Identifier of the port on the Designated Bridge for this port's segment.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sapTlsStpForwardTransitions 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.10
The value of the object sapTlsStpForwardTransitions indicates the number of times this port has transitioned from the Learning state to the Forwarding state.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sapTlsStpInConfigBpdus 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.11
The value of the object sapTlsStpInConfigBpdus indicates the number of Configuration BPDUs received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sapTlsStpInTcnBpdus 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.12
The value of the object sapTlsStpInTcnBpdus indicates the number of Topology Change Notification BPDUs received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sapTlsStpInBadBpdus 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.13
This object specifies the number of bad BPDUs received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sapTlsStpOutConfigBpdus 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.14
The value of the object sapTlsStpOutConfigBpdus indicates the number of Configuration BPDUs sent out this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sapTlsStpOutTcnBpdus 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.15
This object specifies the number of Topology Change Notification BPDUs sent out this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sapTlsStpOperBpduEncap 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.16
The value of the object sapTlsStpOperBpduEncap indicates the operating encapsulation type used on BPDUs sent out and received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER dynamic(1), dot1d(2), pvst(3)  

sapTlsVpnId 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.17
The value of the object sapTlsVpnId indicates the VPN ID of the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  VpnId  

sapTlsCustId 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.18
The Customer ID of the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapTlsMacAddressLimit 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.19
The value of the object sapTlsMacAddressLimit specifies the maximum number of learned and static entries allowed in the FDB of this SAP. The value 0 means: no limit for this SAP. When the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisOperMode is not 'c', the maximum value of sapTlsMacAddressLimit is '131071'.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..196607  

sapTlsNumMacAddresses 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.20
The value of the object sapTlsNumMacAddresses indicates the number of MAC addresses currently present in the FDB that belong to this SAP (Both learned and static MAC addresses are counted).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sapTlsNumStaticMacAddresses 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.21
The value of the object sapTlsNumStaticMacAddresses indicates the number of static MAC addresses currently present in the FDB that belong to this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sapTlsMacLearning 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.22
The value of the object sapTlsMacLearning specifies whether the MAC learning process is enabled for this SAP. The value is ignored if MAC learning is disabled on service level.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapTlsMacAgeing 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.23
The value of the object sapTlsMacAgeing specifies whether the MAC aging process is enabled for this SAP. the value is ignored if MAC aging is disabled on service level.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapTlsStpOperEdge 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.24
The value of the object sapTlsStpOperEdge indicates the operational value of the Edge Port parameter. The object is initialized to the value of sapTlsStpRapidStart and is set FALSE on reception of a BPDU.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sapTlsStpAdminPointToPoint 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.25
The value of the object sapTlsStpAdminPointToPoint specifies the administrative point-to-point status of the LAN segment attached to this sap. The value 'forceTrue' means that this port should always be treated as if it is connected to a point-to-point link. The value of 'forceFalse' means that this port should be treated as having a shared media connection.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER forceTrue(0), forceFalse(1)  

sapTlsStpPortRole 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.26
sapTlsStpPortRole indicates the current role of the sap as defined by the Rapid Spanning Tree Protocol.
Status: current Access: read-only
OBJECT-TYPE    
  StpPortRole  

sapTlsStpAutoEdge 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.27
sapTlsStpAutoEdge specifies whether this SAP is enabled for auto-edge detection as defined by Rapid Spanning Tree Protocol.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapTlsStpOperProtocol 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.28
sapTlsStpOperProtocol indicates whether stp, rstp or mstp is running on this SAP. If the protocol is not enabled on this SAP, the value notApplicable is returned.
Status: current Access: read-only
OBJECT-TYPE    
  StpProtocol  

sapTlsStpInRstBpdus 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.29
The value of the object sapTlsStpInRstBpdus indicates the number of Rapid Spanning Tree (RST) BPDUs received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sapTlsStpOutRstBpdus 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.30
The value of the object sapTlsStpOutRstBpdus indicates the number of Rapid Spanning Tree (RST) BPDUs sent out on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sapTlsLimitMacMove 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.31
When sapTlsLimitMacMove value is set to 'blockable' the agent will monitor the MAC relearn rate on this SAP, and it will block it when the re-learn rate specified by svcTlsMacMoveMaxRate is exceeded. When the value is 'nonBlockable' this SAP will not be blocked, and another blockable SAP will be blocked instead.
Status: current Access: read-write
OBJECT-TYPE    
  TlsLimitMacMove  

sapTlsDhcpSnooping 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.32
The value of the object sapTlsDhcpSnooping specifies whether or not DHCP packets received on this SAP will be snooped. This object was made obsolete in the 3.0 release.
Status: obsolete Access: read-write
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapTlsMacPinning 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.33
The value of the object sapTlsMacPinning specifies whether or not MAC address pinning is active on this SAP. The value will be set by default to disabled. However for a SAP that belongs to a residential SHG, the value is set to enabled by the system, and cannot be altered by the operator. Setting the value to enable disables re-learning of MAC addresses on other SAPs or spoke-SDPs within the same VPLS; the MAC address will hence remain attached to the SAP for the duration of its age-timer. This object has effect only for MAC addresses learned via the normal MAC learning process, and not for entries learned via DHCP.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapTlsDiscardUnknownSource 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.34
with the object sapTlsMacAddressLimit a limit can be configured for the max number of MAC addresses that will be learned on this SAP. When this limit is reached, packets with unknown source MAC address are forwarded by default. By setting sapTlsDiscardUnknownSource to enabled, packets with unknown source MAC will be dropped in stead.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapTlsMvplsPruneState 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.35
The value of sapTlsMvplsPruneState indicates the mVPLS prune state of the SAP. The object will be set to notApplicable if the SAP is not managed by a mVPLS. If the SAP is managed the state reflects whether or not the SAP is pruned by the STP instance running in the mVPLS instance.
Status: current Access: read-only
OBJECT-TYPE    
  MvplsPruneState  

sapTlsMvplsMgmtService 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.36
The value of sapTlsMvplsMgmtService indicates the service Id of the service where the STP instance is running that is managing this SAP. This object is only valid if sapTlsMvplsPruneState is different from notApplicable.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxServId  

sapTlsMvplsMgmtPortId 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.37
The value of sapTlsMvplsMgmtPortId indicates the SAP port Id of the SAP in the mVPLS instance specified in sapTlsMvplsMgmtService that is controlling this SAP. This object is only valid if sapTlsMvplsPruneState is different from notApplicable.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxPortID  

sapTlsMvplsMgmtEncapValue 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.38
The value of sapTlsMvplsMgmtEncapValue indicates the SAP Encap value of the SAP in the mVPLS instance specified in sapTlsMvplsMgmtService that is controlling this SAP. This object is only valid if sapTlsMvplsPruneState is different from notApplicable.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxEncapVal  

sapTlsArpReplyAgent 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.39
The value of the object sapTlsArpReplyAgent specifies the status of the special ARP response mechanism in the system for ARP requests destined to static or dynamic hosts associated with this SAP. disabled: the ARP reply function is not operational enabled: the ARP reply function is enabled without subscriber identification. enabledWithSubscrIdent: the ARP reply function is enabled with subscriber identification.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2), enabledWithSubscrIdent(3)  

sapTlsStpException 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.40
The value of the object sapTlsStpException indicates whether an STP exception condition is present on this Sap. - none : no exception condition found. - oneWayCommuniation : The neighbor RSTP peer on this link is not able to detect our presence. - downstreamLoopDetected :A loop is detected on this link.
Status: current Access: read-only
OBJECT-TYPE    
  StpExceptionCondition  

sapTlsAuthenticationPolicy 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.41
The value of the object sapTlsAuthenticationPolicy specifies which subscriber authentication policy must be applied when a DHCP msg is received on the interface. The authentication policies must be defined in tmnxSubAuthPlcyTable. The policy will only be applied when sapTlsDhcpSnoop is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

sapTlsL2ptTermination 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.42
The value of the object sapTlsL2ptTermination specifies whether received L2 Protocol Tunnel pdu's are terminated on this port or sap
Status: current Access: read-write
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapTlsBpduTranslation 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.43
The value of the object sapTlsBpduTranslation specifies whether received L2 Protocol Tunnel pdu's are translated before being sent out on this port or sap
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), disabled(2), pvst(3), stp(4)  

sapTlsStpRootGuard 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.44
The value of the object sapTlsStpRootGuard specifies whether this port is allowed to become STP root port. It corresponds to the parameter 'restrictedRole' in 802.1Q. If set, it can cause lack of spanning tree connectivity.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sapTlsStpInsideRegion 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.45
The value of the object sapTlsStpInsideRegion indicates whether the network connected to the SAP is in the same MST region. It corresponds to the parameter 'infoInternal' in 802.1Q.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sapTlsEgressMcastGroup 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.46
The value of the object sapTlsEgressMcastGroup specifies the Egress Multicast Group this SAP belongs to.
Status: current Access: read-write
OBJECT-TYPE    
  TNamedItemOrEmpty  

sapTlsStpInMstBpdus 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.47
The value of the object sapTlsStpInMstBpdus indicates the number of Multiple Spanning Tree (MST) BPDUs received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sapTlsStpOutMstBpdus 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.48
The value of the object sapTlsStpOutMstBpdus indicates the number of Multiple Spanning Tree (MST) BPDUs sent out on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sapTlsRestProtSrcMac 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.49
The value of the object sapTlsRestProtSrcMac specifies how the agent will handle relearn requests for protected MAC addresses. When the value of this object is 'true' requests to relearn a protected MAC address will be ignored. In addition, if the value of sapTlsRestProtSrcMacAction is 'disable', then the SAP where the protected source MAC was seen will be brought operationally down.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sapTlsRestUnprotDstMac 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.50
The value of the object sapTlsRestUnprotDstMac specifies how the system will forward packets destined to an unprotected MAC address. When the value of this object is 'true' packets destined to an unprotected MAC address will be dropped.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sapTlsStpRxdDesigBridge 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.51
The value of the object sapTlsStpRxdDesigBridge indicates the designated Bridge Identifier in the last BPDU which was received on this SAP. It identifies which bridge is connected to the SAP.
Status: current Access: read-only
OBJECT-TYPE    
  BridgeId  

sapTlsStpRootGuardViolation 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.52
The value of the object sapTlsStpRootGuardViolation indicates whether there is a root-guard violation at the present time. This can only happen when sapTlsStpRootGuard is set to true.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sapTlsShcvAction 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.53
The value of the object sapTlsShcvAction indicates whether any action should be triggered when the connectivity check fails.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER alarm(1), remove(2)  

sapTlsShcvSrcIp 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.54
The value of the object sapTlsShcvSrcIp specifies the source IP address used when doing the connectivity check. The value 0.0.0.0 indicates that no host IP address is specified.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sapTlsShcvSrcMac 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.55
The value of the object sapTlsShcvSrcMac specifies the MAC address used when doing the connectivity check. The value 0:0:0:0:0:0 indicates that no host MAC address is specified.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

sapTlsShcvInterval 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.56
The value of the object sapTlsShcvInterval specifies the interval in minutes between connectivity checks. Zero means no connectivity checking.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..6000  

sapTlsMvplsMgmtMsti 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.57
The value of the object sapTlsMvplsMgmtMsti indicates the MST-instance in the mVPLS instance specified in sapTlsMvplsMgmtService that is controlling this SAP. A value of 0 indicates the CIST. This object is only valid if sapTlsMvplsPruneState is different from notApplicable.
Status: current Access: read-only
OBJECT-TYPE    
  MstiInstanceIdOrZero  

sapTlsMacMoveNextUpTime 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.58
The value of the object sapTlsMacMoveNextUpTime counts down the time in seconds until a SAP that has been brought down due to exceeding the TLS svcTlsMacMoveMaxRate, sapOperFlags 'relearnLimitExceeded', is automatically brought up again. When this value is 0xffff, the SAP will never be automatically brought up. The value is zero when sapOperStatus is 'up'.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sapTlsMacMoveRateExcdLeft 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.59
The value of the object sapTlsMacMoveRateExcdLeft counts down the number of times this SAP can exceed the TLS svcTlsMacMoveMaxRate and still be automatically brought up.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sapTlsRestProtSrcMacAction 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.60
The value of the object sapTlsRestProtSrcMacAction indicates the action to take whenever a relearn request for a protected MAC is received on a restricted SAP. When the value of this object is 'disable' the SAP will be placed in the operational down state, with the operating flag 'recProtSrcMac' set. When the value of this object is 'alarm-only', the SAP will be left up and only a notification, sapReceivedProtSrcMac, will be generated.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), alarm-only(2)  

sapTlsL2ptForceBoundary 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.61
The value of sapTlsL2ptForceBoundary specifies if sapTlsL2ptTermination is enforced for its managed SAP's. Setting the value of the object sapTlsL2ptForceBoundary of a SAP in a Management VPLS to `true' forces all its managed SAP's to have sapTlsL2ptTermination enabled. This value can only be `true' if the SAP belongs to a management VPLS. If this SAP has managed SAP's already with sapTlsL2ptTermination disabled, it is not allowed to set sapTlsL2ptForceBoundary to `true'.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sapTlsLimitMacMoveLevel 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.62
The value of the object sapTlsLimitMacMoveLevel specifies the hierarchy in which SAPs are blocked when a MAC-move limit is exceeded. When a MAC is moving among multiple SAPs or spoke-SDPs, the SAP bind or spoke-SDP bind with the lower level is blocked first. (tertiary is the lowest)
Status: current Access: read-write
OBJECT-TYPE    
  TlsLimitMacMoveLevel  

sapTlsBpduTransOper 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.63
The value of the object sapTlsBpduTransOper indicates the operational bpdu encapsulation used for BPDU translated frames.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER undefined(1), disabled(2), pvst(3), stp(4)  

sapTlsDefMsapPolicy 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.64
The value of sapTlsDefMsapPolicy specifies the default Managed SAP policy to use to create Managed SAPs when the response from the Radius server does not specify a Managed SAP policy. The value of sapTlsDefMsapPolicy is only valid for a SAP with a sapSubType value of 'capture'. If the value is set to a non-empty string for a SAP with a sapSubType value other than 'capture', an 'inconsistentValue' error will be returned. The Managed SAP policy must be defined in msapPlcyTable, otherwise an 'inconsistentValue' error will be returned.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

sapTlsL2ptProtocols 4.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.65
The value of the object sapTlsL2ptTermination specifies which L2 Protocol Tunnel pdu's are terminated on this port or sap
Status: current Access: read-write
OBJECT-TYPE    
  L2ptProtocols  

sapTlsL2ptForceProtocols 4.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.66
The value of the object sapTlsL2ptForceProtocols specifies which L2 Protocol Tunnel pdu's must be terminated by SAP's managed by this SAP. This object is only relevant if the value of the object sapTlsL2ptForceBoundary is 'true'. For every SAP managed by this SAP, each L2 protocol specified by sapTlsL2ptForceProtocols must be terminated, while other L2 protocols may or may not be terminated, depending on the value of sapTlsL2ptProtocols of that managed SAP.
Status: current Access: read-write
OBJECT-TYPE    
  L2ptProtocols  

sapTlsPppoeMsapTrigger 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.67
The value of sapTlsPppoeMsapTrigger specifies whether the receipt of PPPoE trigger packets on a VPLS SAP with a sapSubType value of 'capture' will result in a Radius authentication that will provide a service context and the creation of a SAP with a sapSubType value of 'managed'. An attempt to set the value sapTlsPppoeMsapTrigger to 'true' on a SAP with sapSubType other than 'capture' will return an 'inconsistentValue' error.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sapTlsDhcpMsapTrigger 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.68
The value of sapTlsDhcpMsapTrigger specifies whether the receipt of DHCP trigger packets on this VPLS SAP with a sapSubType value of 'capture' will result in a Radius authentication that will provide a service context and the creation of a SAP with a sapSubType value of 'managed'. An attempt to set the value sapTlsDhcpMsapTrigger to 'true' on a SAP with sapSubType other than 'capture' will return an 'inconsistentValue' error.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sapTlsMrpJoinTime 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.69
The value of sapTlsMrpJoinTime specifies a timer value in 10ths of seconds which determines the maximum rate at which attribute join messages can be sent on the SAP.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..10  

sapTlsMrpLeaveTime 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.70
The value of sapTlsMrpLeaveTime specifies a timer value in 10ths of seconds which determines the amount of time a registered attribute is held in leave state before the registration is removed.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 30..60  

sapTlsMrpLeaveAllTime 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.71
The value of sapTlsMrpLeaveAllTime specifies the a timer value in 10ths of seconds which determines the frequency where all attribute declarations on the SAP are all refreshed.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 60..300  

sapTlsMrpPeriodicTime 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.72
The value of sapTlsMrpPeriodicTime specifies a timer value in 10ths of seconds which determines the frequency of re-transmission of attribute declarations.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 10..100  

sapTlsMrpPeriodicEnabled 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.73
The value of sapTlsMrpPeriodicEnabled specifies whether re-transmission of attribute declarations is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sapAtmInfoTable 1.3.6.1.4.1.6527.3.1.2.4.3.4
A table that contains ATM SAP information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapAtmInfoEntry

sapAtmInfoEntry 1.3.6.1.4.1.6527.3.1.2.4.3.4.1
Information about a specific ATM SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapAtmInfoEntry  

sapAtmEncapsulation 1.3.6.1.4.1.6527.3.1.2.4.3.4.1.1
This object specifies the data encapsulation used over the AAL5 SSCS layer. The definition references RFC 2684 Multiprotocol Encapsulation over ATM AAL5 and to the ATM Forum LAN Emulation specification.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER vcMultiplexRoutedProtocol(1), vcMultiplexBridgedProtocol8023(2), llcSnapRoutedProtocol(7), multiprotocolFrameRelaySscs(8), unknown(10), llcSnapBridgedProtocol8023(11)  

sapAtmIngressTrafficDescIndex 1.3.6.1.4.1.6527.3.1.2.4.3.4.1.2
This object specifies the index of the ATM traffic descriptor in the ATM traffic data encapsulation used in for the ingress direction over the AAL5 SSCS layer. The definition references RFC 2684 Multiprotocol Encapsulation over ATM AAL5 and to the ATM Forum LAN Emulation specification.
Status: current Access: read-write
OBJECT-TYPE    
  AtmTrafficDescrParamIndex 1..1000  

sapAtmEgressTrafficDescIndex 1.3.6.1.4.1.6527.3.1.2.4.3.4.1.3
This object specifies the index of the ATM traffic descriptor in the ATM traffic data encapsulation used in for the egress direction over the AAL5 SSCS layer. The definition references RFC 2684 Multiprotocol Encapsulation over ATM AAL5 and to the ATM Forum LAN Emulation specification.
Status: current Access: read-write
OBJECT-TYPE    
  AtmTrafficDescrParamIndex 1..1000  

sapAtmOamAlarmCellHandling 1.3.6.1.4.1.6527.3.1.2.4.3.4.1.4
A value of up specifies that the OAM status of a pvc affects the sap operational status and OAM AIS/RDI cell generation upon a sap operational status of down. A value of down specifies that the OAM status of a pvc will not affect the operational status of the associated sap and no OAM AIS/RDI cells are generated.
Status: current Access: read-write
OBJECT-TYPE    
  ServiceAdminStatus  

sapAtmOamTerminate 1.3.6.1.4.1.6527.3.1.2.4.3.4.1.5
The sapAtmOamTerminate object specifies whether this SAP will act as an OAM termination point. If enabled, OAM cells will be sunk by the SAP and can affect the SAP's operational status (if sapAtmOamAlarmCellHandling is also enabled). Otherwise the OAM cells will be passed into the APIPE service. This object is only configurable for ATM SAPs that are part of an APIPE service SDU or VCC mode. If the sapPortId belongs to an Multi-Chassis APS port, the default value is up.
Status: current Access: read-write
OBJECT-TYPE    
  ServiceAdminStatus  

sapAtmOamPeriodicLoopback 1.3.6.1.4.1.6527.3.1.2.4.3.4.1.6
The sapAtmOamPeriodicLoopback object specifies whether this SAP will run periodic OAM loopbacks or not. If enabled, an ATM OAM loopback cell will be transmitted every period as configured in tAtmSysOamLoopbackPeriod. If a response is not received and tAtmSysOamRetryDown consecutive retries also result in failure, the endpoint will transition to the eteAisLoc state. Once in the eteAisLoc state, an ATM OAM loopback cell will be transmitted every period as configured in tAtmSysOamLoopbackPeriod. If a response is received for the periodic loopback and tAtmSysOamRetryUp consecutive retries also each receive a response, the endpoint will transition back to the up state. This object is only configurable on IES or VPRN service endpoints.
Status: current Access: read-write
OBJECT-TYPE    
  ServiceAdminStatus  

sapBaseStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.6
A table that contains basic SAP statistics. In the descriptions below 'Pchip' refers to the Alcatel 7x50 SR series Packet Processing chip, while 'Qchip' refers to the Alcatel 7x50 SR series QoS Queueing Engine chip.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapBaseStatsEntry

sapBaseStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.6.1
Basic statistics about a specific SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapBaseStatsEntry  

sapBaseStatsIngressPchipDroppedPackets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.1
The number of packets dropped by the ingress Pchip due to: SAP state, ingress MAC, IP or IPv6 filter, same segment discard, bad checksum, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsIngressPchipDroppedOctets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.2
The number of octets dropped by the ingress Pchip due to: SAP state, ingress MAC, IP or IPv6 filter, same segment discard, bad checksum, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsIngressPchipOfferedHiPrioPackets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.3
The number of high priority packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsIngressPchipOfferedHiPrioOctets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.4
The number of high priority octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsIngressPchipOfferedLoPrioPackets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.5
The number of low priority packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsIngressPchipOfferedLoPrioOctets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.6
The number of low priority octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsIngressQchipDroppedHiPrioPackets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.7
The number of high priority packets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsIngressQchipDroppedHiPrioOctets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.8
The number of high priority octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsIngressQchipDroppedLoPrioPackets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.9
The number of low priority packets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsIngressQchipDroppedLoPrioOctets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.10
The number of low priority octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsIngressQchipForwardedInProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.11
The number of in-profile packets (rate below CIR) forwarded by the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsIngressQchipForwardedInProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.12
The number of in-profile octets (rate below CIR) forwarded by the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsIngressQchipForwardedOutProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.13
The number of out-of-profile packets (rate above CIR) forwarded by the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsIngressQchipForwardedOutProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.14
The number of out-of-profile octets (rate above CIR) forwarded by the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsEgressQchipDroppedInProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.15
The number of in-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsEgressQchipDroppedInProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.16
The number of in-profile octets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsEgressQchipDroppedOutProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.17
The number of out-of-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsEgressQchipDroppedOutProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.18
The number of out-of-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsEgressQchipForwardedInProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.19
The number of in-profile packets (rate below CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsEgressQchipForwardedInProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.20
The number of in-profile octets (rate below CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsEgressQchipForwardedOutProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.21
The number of out-of-profile packets (rate above CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsEgressQchipForwardedOutProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.22
The number of out-of-profile octets (rate above CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsCustId 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.23
The Customer ID for the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapBaseStatsIngressPchipOfferedUncoloredPackets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.24
The number of uncolored packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsIngressPchipOfferedUncoloredOctets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.25
The number of uncolored octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsAuthenticationPktsDiscarded 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.26
The number of DHCP packets discarded as result of authentication.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapBaseStatsAuthenticationPktsSuccess 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.27
The number of DHCP packets successfully authenticated.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapBaseStatsLastClearedTime 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.28
The value of sapBaseStatsLastClearedTime indicates the sysUpTime when the counters in this table were last cleared.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapIngQosQueueStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.7
A table that contains ingress QoS queue SAP statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapIngQosQueueStatsEntry

sapIngQosQueueStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.7.1
Ingress statistics about a specific SAP's QoS queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapIngQosQueueStatsEntry  

sapIngQosQueueId 1.3.6.1.4.1.6527.3.1.2.4.3.7.1.1
The index of the ingress QoS queue of this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  TSapIngQueueId  

sapIngQosQueueStatsOfferedHiPrioPackets 1.3.6.1.4.1.6527.3.1.2.4.3.7.1.2
The number of high priority packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosQueueStatsDroppedHiPrioPackets 1.3.6.1.4.1.6527.3.1.2.4.3.7.1.3
The number of high priority packets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosQueueStatsOfferedLoPrioPackets 1.3.6.1.4.1.6527.3.1.2.4.3.7.1.4
The number of low priority packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosQueueStatsDroppedLoPrioPackets 1.3.6.1.4.1.6527.3.1.2.4.3.7.1.5
The number of low priority packets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosQueueStatsOfferedHiPrioOctets 1.3.6.1.4.1.6527.3.1.2.4.3.7.1.6
The number of high priority octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosQueueStatsDroppedHiPrioOctets 1.3.6.1.4.1.6527.3.1.2.4.3.7.1.7
The number of high priority octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosQueueStatsOfferedLoPrioOctets 1.3.6.1.4.1.6527.3.1.2.4.3.7.1.8
The number of low priority octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosQueueStatsDroppedLoPrioOctets 1.3.6.1.4.1.6527.3.1.2.4.3.7.1.9
The number of low priority octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosQueueStatsForwardedInProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.7.1.10
The number of in-profile packets (rate below CIR) forwarded by the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosQueueStatsForwardedOutProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.7.1.11
The number of out-of-profile packets (rate above CIR) forwarded by the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosQueueStatsForwardedInProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.7.1.12
The number of in-profile octets (rate below CIR) forwarded by the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosQueueStatsForwardedOutProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.7.1.13
The number of out-of-profile octets (rate above CIR) forwarded by the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosCustId 1.3.6.1.4.1.6527.3.1.2.4.3.7.1.14
The Customer ID for the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapIngQosQueueStatsUncoloredPacketsOffered 1.3.6.1.4.1.6527.3.1.2.4.3.7.1.15
The number of uncolored packets offered to the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosQueueStatsUncoloredOctetsOffered 1.3.6.1.4.1.6527.3.1.2.4.3.7.1.16
The number of uncolored octets offered to the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosQueueStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.8
A table that contains egress QoS queue SAP statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEgrQosQueueStatsEntry

sapEgrQosQueueStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.8.1
Egress statistics about a specific SAP's QoS queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEgrQosQueueStatsEntry  

sapEgrQosQueueId 1.3.6.1.4.1.6527.3.1.2.4.3.8.1.1
The index of the egress QoS queue of this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  TSapEgrQueueId  

sapEgrQosQueueStatsForwardedInProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.8.1.2
The number of in-profile packets (rate below CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosQueueStatsDroppedInProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.8.1.3
The number of in-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosQueueStatsForwardedOutProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.8.1.4
The number of out-of-profile packets (rate above CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosQueueStatsDroppedOutProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.8.1.5
The number of out-of-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosQueueStatsForwardedInProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.8.1.6
The number of in-profile octets (rate below CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosQueueStatsDroppedInProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.8.1.7
The number of in-profile octets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosQueueStatsForwardedOutProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.8.1.8
The number of out-of-profile octets (rate above CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosQueueStatsDroppedOutProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.8.1.9
The number of out-of-profile octets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosCustId 1.3.6.1.4.1.6527.3.1.2.4.3.8.1.10
The Customer ID for the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapIngQosSchedStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.9
A table that contains ingress QoS queue SAP statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapIngQosSchedStatsEntry

sapIngQosSchedStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.9.1
Ingress statistics about a specific SAP's QoS queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapIngQosSchedStatsEntry  

sapIngQosSchedName 1.3.6.1.4.1.6527.3.1.2.4.3.9.1.1
The index of the ingress QoS scheduler of this SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

sapIngQosSchedStatsForwardedPackets 1.3.6.1.4.1.6527.3.1.2.4.3.9.1.2
The number of forwarded packets, as determined by the SAP ingress scheduler policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosSchedStatsForwardedOctets 1.3.6.1.4.1.6527.3.1.2.4.3.9.1.3
The number of forwarded octets, as determined by the SAP ingress scheduler policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosSchedCustId 1.3.6.1.4.1.6527.3.1.2.4.3.9.1.4
The Customer ID for the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapEgrQosSchedStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.10
A table that contains ingress QoS queue SAP statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEgrQosSchedStatsEntry

sapEgrQosSchedStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.10.1
Egress statistics about a specific SAP's QoS queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEgrQosSchedStatsEntry  

sapEgrQosSchedName 1.3.6.1.4.1.6527.3.1.2.4.3.10.1.1
The index of the egress QoS scheduler of this SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

sapEgrQosSchedStatsForwardedPackets 1.3.6.1.4.1.6527.3.1.2.4.3.10.1.2
The number of forwarded packets by the egress Qchip, as determined by the SAP egress scheduler policy.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosSchedStatsForwardedOctets 1.3.6.1.4.1.6527.3.1.2.4.3.10.1.3
The number of forwarded octets by the egress Qchip, as determined by the SAP egress scheduler policy.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosSchedCustId 1.3.6.1.4.1.6527.3.1.2.4.3.10.1.4
The Customer ID for the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapTlsManagedVlanListTable 1.3.6.1.4.1.6527.3.1.2.4.3.11
This table is used only for SAPs that are part of a management VPLS. It indicates for each SAP the ranges of associated VLANs that will be affected when the SAP changes state.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapTlsManagedVlanListEntry

sapTlsManagedVlanListEntry 1.3.6.1.4.1.6527.3.1.2.4.3.11.1
Each row specifies a range of VLANS associated with a SAP of a MVPLS. Ranges may contains overlapping sections only for Mvpls SAPs that belong to the same service.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapTlsManagedVlanListEntry  

sapTlsMvplsMinVlanTag 1.3.6.1.4.1.6527.3.1.2.4.3.11.1.1
The value of sapTlsMvplsMinVlanTag specifies the left bound (i.e. min. value) of a range of VLANs that are associated with the Mvpls SAP. sapTlsMvplsMinVlanTag must be smaller than (or equal to) sapTlsMvplsMaxVlanTag. Special values are: 0: this value is reserved for the null tag. 4095: this value denotes the default SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..4095  

sapTlsMvplsMaxVlanTag 1.3.6.1.4.1.6527.3.1.2.4.3.11.1.2
The value of sapTlsMvplsMaxVlanTag specifies the right bound (i.e. max. value) of a range of VLANs that are associated with the Mvpls SAP. Special values are: 0: this value is reserved for the null tag. 4095: this value denotes the default SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..4095  

sapTlsMvplsRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.11.1.3
The value of sapTlsMvplsRowStatus specifies the status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'. A row (i.e. a range of VLAN tags) can be destroyed only if there are no SAPs defined in regular VPLSses in this range.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sapAntiSpoofTable 1.3.6.1.4.1.6527.3.1.2.4.3.12
The sapAntiSpoofTable contains information about anti-spoofing filters on a SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapAntiSpoofEntry

sapAntiSpoofEntry 1.3.6.1.4.1.6527.3.1.2.4.3.12.1
An entry in the sapAntiSpoofTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapAntiSpoofEntry  

sapAntiSpoofIpAddress 1.3.6.1.4.1.6527.3.1.2.4.3.12.1.1
The value of sapAntiSpoofIpAddress indicates the IP address for which this table entry contains information.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sapAntiSpoofMacAddress 1.3.6.1.4.1.6527.3.1.2.4.3.12.1.2
The value of sapAntiSpoofMacAddress indicates the MAC address for which this table entry contains information.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

sapStaticHostTable 1.3.6.1.4.1.6527.3.1.2.4.3.13
The sapStaticHostTable is used to configure static hosts on a SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapStaticHostEntry

sapStaticHostEntry 1.3.6.1.4.1.6527.3.1.2.4.3.13.1
Each row entry represents information on a statically configured host. Entries can be created and deleted via SNMP SET operations.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapStaticHostEntry  

sapStaticHostRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.1
The value of the object sapStaticHostRowStatus controls the creation and deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sapStaticHostIpAddress 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.2
The value of the object sapStaticHostIpAddress specifies the IP address associated with this static host. The value 0.0.0.0 indicates that no host IP address is specified.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

sapStaticHostMacAddress 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.3
The value of the object sapStaticHostMacAddress specifies the MAC address associated with this static host. The value 0:0:0:0:0:0 indicates that no host MAC address is specified.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

sapStaticHostSubscrIdent 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.4
The value of the object sapStaticHostSubscrIdent specifies the subscriber identification for this static host.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

sapStaticHostSubProfile 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.5
The value of the object sapStaticHostSubProfile specifies the subscriber profile for this static host. The specified subscriber profile needs to exists in the TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubProfileTable.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapStaticHostSlaProfile 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.6
The value of the object sapStaticHostSlaProfile specifies the SLA profile for this static host. The specified SLA profile needs to exists in the TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSLAProfileTable.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapStaticHostShcvOperState 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.7
The value of the object sapStaticHostShcvOperState gives the state of the subscriber host connectivity check for this static host.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), undefined(2), down(3), up(4)  

sapStaticHostShcvChecks 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.8
The value of the object sapStaticHostShcvChecks specifies the number of connectivity checks for this static host.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sapStaticHostShcvReplies 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.9
The value of the object sapStaticHostShcvReplies specifies the number of host replies for this static host.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sapStaticHostShcvReplyTime 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.10
The value of the object sapStaticHostShcvReplyTime gives the timestamp of the last successful connectivity check for this static host.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapStaticHostDynMacAddress 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.11
The value of the object sapStaticHostDynMacAddress gives the MAC address learned via ARP in case this is an IP-only static host (sapStaticHostMacAddress is set to 0:0:0:0:0:0). The value 0:0:0:0:0:0 indicates that no MAC address is learned yet.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

sapStaticHostRetailerSvcId 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.12
The value of the object sapStaticHostRetailerSvcId indicates the service ID of the retailer VPRN service to which this static host belongs. When this object is non zero, the static host belongs to a retailer VPRN.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxServId  

sapStaticHostRetailerIf 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.13
The value of the object sapStaticHostRetailerIf indicates the interface index of the retailer VPRN interface to which this static host belongs. When this object is non zero, the static host belongs to a retailer VPRN.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndexOrZero  

sapStaticHostFwdingState 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.14
The value of sapStaticHostFwdingState indicates the forwarding state of this static host. When the value is 'outOfService', host traffic is not forwarded. When it is 'inService', host traffic is forwarded.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxOperState  

sapStaticHostAncpString 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.15
The value of sapStaticHostAncpString specifies the ancp-string associated to this SAP host.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..63)  

sapStaticHostSubIdIsSapId 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.16
The value of the object sapStaticHostSubIdIsSapId specifies whether the SAP-id is taken as subscriber identification for this static host.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapStaticHostAppProfile 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.17
The value of sapStaticHostAppProfile specifies the application profile for this static host. The specified application profile needs to exist in the TIMETRA-BSX-MIB::tmnxBsxAppProfTable.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapStaticHostIntermediateDestId 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.18
The value of sapStaticHostIntermediateDestId specifies to which intermediate destination (for example a DSLAM) this host belongs.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

sapTlsDhcpInfoTable 1.3.6.1.4.1.6527.3.1.2.4.3.14
sapTlsDhcpInfoTable contains DHCP information related to a TLS SAP. This table complements sapTlsInfoTable, and contains an entry for each Tls SAP. Rows in this table are created and deleted automatically by the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapTlsDhcpInfoEntry

sapTlsDhcpInfoEntry 1.3.6.1.4.1.6527.3.1.2.4.3.14.1
DHCP specific information for a TLS SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapTlsDhcpInfoEntry  

sapTlsDhcpAdminState 1.3.6.1.4.1.6527.3.1.2.4.3.14.1.1
The value of the object sapTlsDhcpAdminState specifies the overall enable/disable state of all DHCP related actions on this Sap. The value 'disabled' allows the user to configure individual DHCP commands but administratively disable them.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapTlsDhcpDescription 1.3.6.1.4.1.6527.3.1.2.4.3.14.1.2
The value of the object sapTlsDhcpDescription specifies a user provided description for DHCP on this Sap. It consists of any printable, seven-bit ASCII characters up to 80 characters in length.
Status: current Access: read-write
OBJECT-TYPE    
  ServObjDesc  

sapTlsDhcpSnoop 1.3.6.1.4.1.6527.3.1.2.4.3.14.1.3
The value of the object sapTlsDhcpSnoop specifies the enable/disable state for DHCP snooping on this Sap. Note that in order for snooping to be enabled the object sapTlsDhcpAdminState must also have the value enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapTlsDhcpLeasePopulate 1.3.6.1.4.1.6527.3.1.2.4.3.14.1.4
The value of the object sapTlsDhcpLeasePopulate specifies the maximum number of DHCP lease states allowed on this SAP.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..8000  

sapTlsDhcpOperLeasePopulate 1.3.6.1.4.1.6527.3.1.2.4.3.14.1.5
The value of the object sapTlsDhcpOperLeasePopulate indicates the number of DHCP lease states currently allocated on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..8000  

sapTlsDhcpInfoAction 1.3.6.1.4.1.6527.3.1.2.4.3.14.1.6
The value of the object sapTlsDhcpInfoAction specifies the DHCP option reforwarding policy: 'replace' - replace existing information with configured information 'drop' - discard messages with existing relay information if the option-82 information is also present. 'keep' - retain the existing relay information.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER replace(1), drop(2), keep(3)  

sapTlsDhcpCircuitId 1.3.6.1.4.1.6527.3.1.2.4.3.14.1.7
The value of the object sapTlsDhcpCircuitId specifies whether or not the circuit-id suboption is present, and if it is present what information goes in it: - 'none' the circuit-id suboption will not be part of the information option (Option 82). - 'asciiTuple' the ASCII-encoded concatenated tuple consisting of the - access-node-identifier - service-id - interface-name is used. - 'vlanAsciiTuple' the format will include VLAN-id and dot1p bits in addition to what is included in ascii-tuple already. The format is supported on dot1q and qinq encapsulated ports only. Thus, when the option 82 bits are stripped, dot1p bits will be copied to the Ethernet header of an outgoing packet.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), asciiTuple(1), vlanAsciiTuple(2)  

sapTlsDhcpRemoteId 1.3.6.1.4.1.6527.3.1.2.4.3.14.1.8
The value of the object sapTlsDhcpRemoteId specifies what information goes into the remote-id suboption in the DHCP Relay packet. If the value of this object is set to 'none', the remote-id suboption will not be part of the information option (Option 82). If the value of this object is set to 'mac', the MAC address of the remote end is encoded in the suboption. If the value of this object is set to 'remote-id', sapTlsDhcpRemoteIdString will represent the remote-id. By default, the remote-id value is none.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), mac(2), remote-id(3)  

sapTlsDhcpRemoteIdString 1.3.6.1.4.1.6527.3.1.2.4.3.14.1.9
The value of the object sapTlsDhcpRemoteIdString specifies the remote-id. This object exists only if sapTlsDhcpRemoteId has a value of 'remote-id'.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

sapTlsDhcpProxyAdminState 1.3.6.1.4.1.6527.3.1.2.4.3.14.1.10
The value of sapTlsDhcpProxyAdminState specifies the desired administrative state of the proxy server on this interface. Note that in order for the proxy server to be enabled, the value of sapTlsDhcpAdminState must also be 'enabled'.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapTlsDhcpProxyServerAddr 1.3.6.1.4.1.6527.3.1.2.4.3.14.1.11
The value of sapTlsDhcpProxyServerAddr specifies the IP address which will be used as the source address of the emulated DHCP server in the context of this VPLS SAP. This address is mandatory for the proxy server capability and it should be in the context of the subnet represented by this VPLS.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sapTlsDhcpProxyLeaseTime 1.3.6.1.4.1.6527.3.1.2.4.3.14.1.12
The value of sapTlsDhcpProxyLeaseTime specifies in seconds how long a DHCP client is allowed to use the offered IP address. Value 0 means the lease time provided by a RADIUS or an upstream DHCP server will not be overridden. A lease time of 7 days is used when RADIUS does not provide a lease time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 300..315446399  

sapTlsDhcpProxyLTRadiusOverride 1.3.6.1.4.1.6527.3.1.2.4.3.14.1.13
The value of sapTlsDhcpProxyLTRadiusOverride specifies whether or not the lease time provided by the RADIUS server is presented to the DHCP client. By default the proxy-server will always make use of sapTlsDhcpProxyLeaseTime, regardless of what lease time information is provided from the RADIUS server. When sapTlsDhcpProxyLTRadiusOverride is set to 'true', the proxy-server will use the lease time information provided by the RADIUS server, regardless of the configured one.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sapTlsDhcpVendorIncludeOptions 0.1.3.6.1.4.1.6527.3.1.2.4.3.14.1.14
The value of sapTlsDhcpVendorIncludeOptions specifies what is encoded in the Alcatel vendor specific sub-option of option 82. The value of this object is only used when sapTlsDhcpInfoAction is 'replace'.
Status: current Access: read-write
OBJECT-TYPE    
  BITS systemId(0), clientMac(1), serviceId(2), sapId(3)  

sapTlsDhcpVendorOptionString 1.3.6.1.4.1.6527.3.1.2.4.3.14.1.15
The value of sapTlsDhcpVendorOptionString specifies the string that goes into the Alcatel vendor specific sub-option of option 82. This string is only used when sapTlsDhcpInfoAction is set to 'replace'.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

sapTlsDhcpStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.15
sapTlsDhcpStatsTable contains DHCP statistics related to a TLS SAP. This table complements sapTlsInfoTable, and contains an entry for each Tls SAP. Rows in this table are created and deleted automatically by the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapTlsDhcpStatsEntry

sapTlsDhcpStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.15.1
DHCP statistics for a TLS SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapTlsDhcpStatsEntry  

sapTlsDhcpStatsClntSnoopdPckts 1.3.6.1.4.1.6527.3.1.2.4.3.15.1.1
The value of the object sapTlsDhcpStatsClntSnoopdPckts indicates the number of DHCP client packets that have been snooped on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsDhcpStatsSrvrSnoopdPckts 1.3.6.1.4.1.6527.3.1.2.4.3.15.1.2
The value of the object sapTlsDhcpStatsSrvrSnoopdPckts indicates the number of DHCP server packets that have been snooped on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsDhcpStatsClntForwdPckts 1.3.6.1.4.1.6527.3.1.2.4.3.15.1.3
The value of the object sapTlsDhcpStatsClntForwdPckts indicates the number of DHCP client packets that have been forwarded on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsDhcpStatsSrvrForwdPckts 1.3.6.1.4.1.6527.3.1.2.4.3.15.1.4
The value of the object sapTlsDhcpStatsSrvrForwdPckts indicates the number of DHCP server packets that have been forwarded on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsDhcpStatsClntDropdPckts 1.3.6.1.4.1.6527.3.1.2.4.3.15.1.5
The value of the object sapTlsDhcpStatsClntDropdPckts indicates the number of DHCP client packets that have been dropped on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsDhcpStatsSrvrDropdPckts 1.3.6.1.4.1.6527.3.1.2.4.3.15.1.6
The value of the object sapTlsDhcpStatsSrvrDropdPckts indicates the number of DHCP server packets that have been dropped on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsDhcpStatsClntProxRadPckts 1.3.6.1.4.1.6527.3.1.2.4.3.15.1.7
The value of the object sapTlsDhcpStatsClntProxRadPckts indicates the number of DHCP client packets that have been proxied on this SAP based on data received from a RADIUS server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsDhcpStatsClntProxLSPckts 1.3.6.1.4.1.6527.3.1.2.4.3.15.1.8
The value of the object sapTlsDhcpStatsClntProxLSPckts indicates the number of DHCP client packets that have been proxied on this SAP based on a lease state. The lease itself can have been obtained from a DHCP or RADIUS server. This is the so called lease split functionality.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsDhcpStatsGenReleasePckts 1.3.6.1.4.1.6527.3.1.2.4.3.15.1.9
The value of the object sapTlsDhcpStatsGenReleasePckts indicates the number of DHCP RELEASE messages spoofed on this SAP to the DHCP server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsDhcpStatsGenForceRenPckts 1.3.6.1.4.1.6527.3.1.2.4.3.15.1.10
The value of the object sapTlsDhcpStatsGenForceRenPckts indicates the number of DHCP FORCERENEW messages spoofed on this SAP to the DHCP clients.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsDhcpLeaseStateTable 1.3.6.1.4.1.6527.3.1.2.4.3.16
sapTlsDhcpLeaseStateTable contains DHCP lease state info for a TLS SAP. This table complements sapTlsInfoTable, and contains an entry for each Tls SAP. Rows in this table are created and deleted automatically by the system. The content of this table is moved to the svcDhcpLeaseStateTable.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapTlsDhcpLeaseStateEntry

sapTlsDhcpLeaseStateEntry 1.3.6.1.4.1.6527.3.1.2.4.3.16.1
DHCP Lease State information on a TLS SAP.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SapTlsDhcpLeaseStateEntry  

sapTlsDhcpLseStateCiAddr 1.3.6.1.4.1.6527.3.1.2.4.3.16.1.1
The value of the object sapTlsDhcpLseStateCiAddr indicates the IP address of the DHCP lease state.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  IpAddress  

sapTlsDhcpLseStateChAddr 1.3.6.1.4.1.6527.3.1.2.4.3.16.1.2
The value of the object sapTlsDhcpLseStateChAddr indicates the MAC address of the DHCP lease state.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  MacAddress  

sapTlsDhcpLseStateRemainLseTime 1.3.6.1.4.1.6527.3.1.2.4.3.16.1.3
The value of the object sapTlsDhcpLseStateRemainLseTime indicates the remaining lease time of the Ip address of the DHCP lease state. This object was made obsolete in the 4.0 release.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

sapTlsDhcpLseStateOption82 1.3.6.1.4.1.6527.3.1.2.4.3.16.1.4
The value of the object sapTlsDhcpLseStateOption82 indicates the content of the Option82 for this DHCP lease state. This object was made obsolete in the 4.0 release.
Status: obsolete Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sapTlsDhcpLseStatePersistKey 1.3.6.1.4.1.6527.3.1.2.4.3.16.1.5
The value of the object sapTlsDhcpLseStatePersistKey indicates a key value that can be used to track this lease state in the persistence file. This object was made obsolete in the 4.0 release.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

sapPortIdIngQosSchedStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.17
The sapPortIdIngQosSchedStatsTable contains ingress QoS queue SAP statistics. This table is used when the SAP is a CCAG or LAG in 'link' mode, or an APS.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapPortIdIngQosSchedStatsEntry

sapPortIdIngQosSchedStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.17.1
Each entry represents the ingress statistics about a specific SAP's QoS queue. Entries are created when a scheduler policy is applied to a SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapPortIdIngQosSchedStatsEntry  

sapPortIdIngQosSchedName 1.3.6.1.4.1.6527.3.1.2.4.3.17.1.1
The value of sapPortIdIngQosSchedName is used as an index of the ingress QoS scheduler of this SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

sapPortIdIngPortId 1.3.6.1.4.1.6527.3.1.2.4.3.17.1.2
The value of sapPortIdIngPortId is used as an index of the ingress QoS scheduler of this SAP. When the SAP is an aps/ccag/lag in 'link' mode, this object is the TmnxPortID of the member-port on which the scheduler is applied.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxPortID  

sapPortIdIngQosSchedFwdPkts 1.3.6.1.4.1.6527.3.1.2.4.3.17.1.3
The value of sapPortIdIngQosSchedFwdPkts indicates the number of forwarded packets, as determined by the SAP ingress scheduler policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapPortIdIngQosSchedFwdOctets 1.3.6.1.4.1.6527.3.1.2.4.3.17.1.4
The value of sapPortIdIngQosSchedFwdOctets indicates the number of forwarded octets,as determined by the SAP ingress scheduler policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapPortIdIngQosSchedCustId 1.3.6.1.4.1.6527.3.1.2.4.3.17.1.5
The value of sapPortIdIngQosSchedCustId indicates the Customer ID for the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapPortIdEgrQosSchedStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.18
The sapPortIdEgrQosSchedStatsTable contains egress QoS queue SAP statistics. This table is used when the SAP is a CCAG or LAG in 'link' mode, or an APS.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapPortIdEgrQosSchedStatsEntry

sapPortIdEgrQosSchedStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.18.1
Each entry represents the egress statistics about a specific SAP's QoS queue. Entries are created when a scheduler policy is applied to a SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapPortIdEgrQosSchedStatsEntry  

sapPortIdEgrQosSchedName 1.3.6.1.4.1.6527.3.1.2.4.3.18.1.1
The value of sapPortIdEgrQosSchedName is used as an index of the egress QoS scheduler of this SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

sapPortIdEgrPortId 1.3.6.1.4.1.6527.3.1.2.4.3.18.1.2
The value of sapPortIdEgrPortId is used as an index of the egress QoS scheduler of this SAP. When the SAP is an aps/ccag/lag in 'link' mode, this object is the TmnxPortID of the member-port on which the scheduler is applied.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxPortID  

sapPortIdEgrQosSchedFwdPkts 1.3.6.1.4.1.6527.3.1.2.4.3.18.1.3
The value of sapPortIdEgrQosSchedFwdPkts indicates the number of forwarded packets, as determined by the SAP egress scheduler policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapPortIdEgrQosSchedFwdOctets 1.3.6.1.4.1.6527.3.1.2.4.3.18.1.4
The value of sapPortIdEgrQosSchedFwdOctets indicates the number of forwarded octets,as determined by the SAP egress scheduler policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapPortIdEgrQosSchedCustId 1.3.6.1.4.1.6527.3.1.2.4.3.18.1.5
The value of sapPortIdEgrQosSchedCustId indicates the Customer ID for the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapIngQosQueueInfoTable 1.3.6.1.4.1.6527.3.1.2.4.3.19
This table is used to override the base parameters of a queue, as defined in the associated SAP ingress QoS policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapIngQosQueueInfoEntry

sapIngQosQueueInfoEntry 1.3.6.1.4.1.6527.3.1.2.4.3.19.1
Override values for the specified SAP ingress QoS queue. These values override the corresponding ones specified in the associated SAP ingress QoS policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapIngQosQueueInfoEntry  

sapIngQosQId 1.3.6.1.4.1.6527.3.1.2.4.3.19.1.1
The value of sapIngQosQId indicates the ID of the queue whose parameters are to be overridden.
Status: current Access: not-accessible
OBJECT-TYPE    
  TIngressQueueId  

sapIngQosQRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.19.1.2
The value of sapIngQosQRowStatus controls the creation and deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sapIngQosQLastMgmtChange 1.3.6.1.4.1.6527.3.1.2.4.3.19.1.3
The value of sapIngQosQLastMgmtChange indicates the value of sysUpTime at the time of the last management change of any writable object of this row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapIngQosQOverrideFlags 1.3.6.1.4.1.6527.3.1.2.4.3.19.1.4
The value of sapIngQosQOverrideFlags specifies the set of attributes whose values have been overridden via management on this queue. Clearing a given flag will return the corresponding overridden attribute to the value defined on the SAP's ingress QoS policy.
Status: current Access: read-create
OBJECT-TYPE    
  TQosQueueAttribute  

sapIngQosQCBS 1.3.6.1.4.1.6527.3.1.2.4.3.19.1.5
The value of sapIngQosQCBS specifies the amount of reserved buffer space (in kilo bytes) for this queue.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstSize  

sapIngQosQMBS 1.3.6.1.4.1.6527.3.1.2.4.3.19.1.6
The value of sapIngQosQMBS specifies the maximum amount of buffer space (in kilo bytes) allowed for this queue.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstSize  

sapIngQosQHiPrioOnly 1.3.6.1.4.1.6527.3.1.2.4.3.19.1.7
The value of sapIngQosQHiPrioOnly specifies the percentage of buffer space for this queue, used exclusively by high priority packets.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstPercentOrDefault  

sapIngQosQCIRAdaptation 1.3.6.1.4.1.6527.3.1.2.4.3.19.1.8
The value of sapIngQosQCIRAdaptation specifies the criteria to use to compute the operational CIR value for this queue, while maintaining a minimum offset.
Status: current Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

sapIngQosQPIRAdaptation 1.3.6.1.4.1.6527.3.1.2.4.3.19.1.9
The value of sapIngQosQPIRAdaptation specifies the criteria to use to compute the operational PIR value for this queue, while maintaining a minimum offset.
Status: current Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

sapIngQosQAdminPIR 1.3.6.1.4.1.6527.3.1.2.4.3.19.1.10
The value of sapIngQosQAdminPIR specifies the desired PIR value for this queue.
Status: current Access: read-create
OBJECT-TYPE    
  TPIRRate  

sapIngQosQAdminCIR 1.3.6.1.4.1.6527.3.1.2.4.3.19.1.11
The value of sapIngQosQAdminCIR specifies the desired CIR value for this queue.
Status: current Access: read-create
OBJECT-TYPE    
  TCIRRate  

sapEgrQosQueueInfoTable 1.3.6.1.4.1.6527.3.1.2.4.3.20
This table is used to override the base parameters of a queue, as defined in the associated SAP egress QoS policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEgrQosQueueInfoEntry

sapEgrQosQueueInfoEntry 1.3.6.1.4.1.6527.3.1.2.4.3.20.1
Override values for the specified SAP egress QoS queue. These values override the corresponding ones specified in the associated SAP egress QoS policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEgrQosQueueInfoEntry  

sapEgrQosQId 1.3.6.1.4.1.6527.3.1.2.4.3.20.1.1
The value of sapEgrQosQId indicates the ID of the queue whose parameters are to be overridden.
Status: current Access: not-accessible
OBJECT-TYPE    
  TEgressQueueId  

sapEgrQosQRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.20.1.2
The value of sapEgrQosQRowStatus controls the creation and deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sapEgrQosQLastMgmtChange 1.3.6.1.4.1.6527.3.1.2.4.3.20.1.3
The value of sapEgrQosQLastMgmtChange indicates the value of sysUpTime at the time of the last management change of any writable object of this row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapEgrQosQOverrideFlags 1.3.6.1.4.1.6527.3.1.2.4.3.20.1.4
The value of sapEgrQosQOverrideFlags specifies the set of attributes whose values have been overridden via management on this queue. Clearing a given flag will return the corresponding overridden attribute to the value defined on the SAP's ingress QoS policy.
Status: current Access: read-create
OBJECT-TYPE    
  TQosQueueAttribute  

sapEgrQosQCBS 1.3.6.1.4.1.6527.3.1.2.4.3.20.1.5
The value of sapEgrQosQCBS specifies the amount of reserved buffer space (in kilo bytes) for this queue.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstSize  

sapEgrQosQMBS 1.3.6.1.4.1.6527.3.1.2.4.3.20.1.6
The value of sapEgrQosQMBS specifies the maximum amount of buffer space (in kilo bytes) allowed for this queue.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstSize  

sapEgrQosQHiPrioOnly 1.3.6.1.4.1.6527.3.1.2.4.3.20.1.7
The value of sapEgrQosQHiPrioOnly specifies the percentage of buffer space for this queue, used exclusively by high priority packets.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstPercentOrDefault  

sapEgrQosQCIRAdaptation 1.3.6.1.4.1.6527.3.1.2.4.3.20.1.8
The value of sapEgrQosQCIRAdaptation specifies the criteria to use to compute the operational CIR value for this queue, while maintaining a minimum offset.
Status: current Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

sapEgrQosQPIRAdaptation 1.3.6.1.4.1.6527.3.1.2.4.3.20.1.9
The value of sapEgrQosQPIRAdaptation specifies the criteria to use to compute the operational PIR value for this queue, while maintaining a minimum offset.
Status: current Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

sapEgrQosQAdminPIR 1.3.6.1.4.1.6527.3.1.2.4.3.20.1.10
The value of sapEgrQosQAdminPIR specifies the desired PIR value for this queue.
Status: current Access: read-create
OBJECT-TYPE    
  TPIRRate  

sapEgrQosQAdminCIR 1.3.6.1.4.1.6527.3.1.2.4.3.20.1.11
The value of sapEgrQosQAdminCIR specifies the desired CIR value for this queue.
Status: current Access: read-create
OBJECT-TYPE    
  TCIRRate  

sapEgrQosQAvgOverhead 1.3.6.1.4.1.6527.3.1.2.4.3.20.1.12
The value of sapEgrQosQAvgOverhead specifies the encapsulation overhead, in hundredths of a percent, used to translate packet-based rate to frame-based rate and vice versa.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..10000  

sapIngQosSchedInfoTable 1.3.6.1.4.1.6527.3.1.2.4.3.21
This table is used to override the base parameters of a virtual scheduler, as defined in the associated SAP ingress scheduler policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapIngQosSchedInfoEntry

sapIngQosSchedInfoEntry 1.3.6.1.4.1.6527.3.1.2.4.3.21.1
Override values for the specified SAP ingress virtual scheduler. These values override the corresponding ones specified in the associated SAP ingress scheduler policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapIngQosSchedInfoEntry  

sapIngQosSName 1.3.6.1.4.1.6527.3.1.2.4.3.21.1.1
The value of sapIngQosSName indicates the name of the virtual scheduler whose parameters are to be overridden.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

sapIngQosSRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.21.1.2
The value of sapIngQosSRowStatus controls the creation and deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sapIngQosSLastMgmtChange 1.3.6.1.4.1.6527.3.1.2.4.3.21.1.3
The value of sapIngQosSLastMgmtChange indicates the value of sysUpTime at the time of the last management change of any writable object of this row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapIngQosSOverrideFlags 1.3.6.1.4.1.6527.3.1.2.4.3.21.1.4
The value of sapIngQosSOverrideFlags specifies the set of attributes whose values have been overridden via management on this virtual scheduler. Clearing a given flag will return the corresponding overridden attribute to the value defined on the SAP's ingress scheduler policy.
Status: current Access: read-create
OBJECT-TYPE    
  TVirtSchedAttribute  

sapIngQosSPIR 1.3.6.1.4.1.6527.3.1.2.4.3.21.1.5
The value of sapIngQosSPIR specifies the desired PIR value for this virtual scheduler.
Status: current Access: read-create
OBJECT-TYPE    
  TPIRRate  

sapIngQosSCIR 1.3.6.1.4.1.6527.3.1.2.4.3.21.1.6
The value of sapIngQosSCIR specifies the desired CIR value for this virtual scheduler.
Status: current Access: read-create
OBJECT-TYPE    
  TCIRRate  

sapIngQosSSummedCIR 1.3.6.1.4.1.6527.3.1.2.4.3.21.1.7
The value of sapIngQosSSummedCIR specifies if the CIR should be used as the summed CIR values of the children schedulers or queues. If set to 'true', the applicable scheduler CIR (sapIngQosSCIR) loses its meaning.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapEgrQosSchedInfoTable 1.3.6.1.4.1.6527.3.1.2.4.3.22
This table is used to override the base parameters of a virtual scheduler, as defined in the associated SAP egress scheduler policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEgrQosSchedInfoEntry

sapEgrQosSchedInfoEntry 1.3.6.1.4.1.6527.3.1.2.4.3.22.1
Override values for the specified SAP egress virtual scheduler. These values override the corresponding ones specified in the associated SAP egress scheduler policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEgrQosSchedInfoEntry  

sapEgrQosSName 1.3.6.1.4.1.6527.3.1.2.4.3.22.1.1
The value of sapEgrQosSName indicates the name of the virtual scheduler whose parameters are to be overridden.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

sapEgrQosSRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.22.1.2
The value of sapEgrQosSRowStatus controls the creation and deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sapEgrQosSLastMgmtChange 1.3.6.1.4.1.6527.3.1.2.4.3.22.1.3
The value of sapEgrQosSLastMgmtChange indicates the value of sysUpTime at the time of the last management change of any writable object of this row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapEgrQosSOverrideFlags 1.3.6.1.4.1.6527.3.1.2.4.3.22.1.4
The value of sapEgrQosSOverrideFlags specifies the set of attributes whose values have been overridden via management on this virtual scheduler. Clearing a given flag will return the corresponding overridden attribute to the value defined on the SAP's egress scheduler policy.
Status: current Access: read-create
OBJECT-TYPE    
  TVirtSchedAttribute  

sapEgrQosSPIR 1.3.6.1.4.1.6527.3.1.2.4.3.22.1.5
The value of sapEgrQosSPIR specifies the desired PIR value for this virtual scheduler.
Status: current Access: read-create
OBJECT-TYPE    
  TPIRRate  

sapEgrQosSCIR 1.3.6.1.4.1.6527.3.1.2.4.3.22.1.6
The value of sapEgrQosSCIR specifies the desired CIR value for this virtual scheduler.
Status: current Access: read-create
OBJECT-TYPE    
  TCIRRate  

sapEgrQosSSummedCIR 1.3.6.1.4.1.6527.3.1.2.4.3.22.1.7
The value of sapEgrQosSSummedCIR specifies if the CIR should be used as the summed CIR values of the children schedulers or queues. If set to 'true', the applicable scheduler CIR (sapEgrQosSCIR) loses its meaning.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapSubMgmtInfoTable 1.3.6.1.4.1.6527.3.1.2.4.3.23
A table that contains SAP subscriber management information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapSubMgmtInfoEntry

sapSubMgmtInfoEntry 1.3.6.1.4.1.6527.3.1.2.4.3.23.1
Subscriber management specific information about a SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapSubMgmtInfoEntry  

sapSubMgmtAdminStatus 1.3.6.1.4.1.6527.3.1.2.4.3.23.1.1
The value of sapSubMgmtAdminStatus specifies whether enhanced subscriber management is enabled on this SAP.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapSubMgmtDefSubProfile 1.3.6.1.4.1.6527.3.1.2.4.3.23.1.2
The value of sapSubMgmtDefSubProfile specifies the default subscriber profile applicable on this SAP. The corresponding profile is defined in TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubProfileTable. A value of 'default' is not allowed for this object.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapSubMgmtDefSlaProfile 1.3.6.1.4.1.6527.3.1.2.4.3.23.1.3
The value of sapSubMgmtDefSlaProfile specifies the default SLA profile applicable on this SAP. The corresponding profile is defined in TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSLAProfileTable.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapSubMgmtSubIdentPolicy 1.3.6.1.4.1.6527.3.1.2.4.3.23.1.4
The value of sapSubMgmtSubIdentPolicy specifies the subscriber identification policy applicable on this SAP. The corresponding policy is defined in TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubIdentPolicyTable.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapSubMgmtSubscriberLimit 1.3.6.1.4.1.6527.3.1.2.4.3.23.1.5
The value of sapSubMgmtSubscriberLimit specifies the maximum number of subscribers allowed for this SAP. If the value is 0, there is no limit. Only if the value is 1, the 'single-sub-parameters' defined with objects sapSubMgmtProfiledTrafficOnly, sapSubMgmtNonSubTrafficSubProf and sapSubMgmtNonSubTrafficSlaProf are meaningful.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..8000  

sapSubMgmtProfiledTrafficOnly 1.3.6.1.4.1.6527.3.1.2.4.3.23.1.6
The value of sapSubMgmtProfiledTrafficOnly specifies whether only profiled traffic is applicable for this SAP. If set to 'true', all SAP queues will be deleted. The value of this object is only meaningful if sapSubMgmtSubscriberLimit is set to 1.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapSubMgmtNonSubTrafficSubIdent 1.3.6.1.4.1.6527.3.1.2.4.3.23.1.7
The value of sapSubMgmtNonSubTrafficSubIdent specifies the subscriber identification applicable on this SAP for all non-subscriber traffic. The value of this object is only meaningful if sapSubMgmtSubscriberLimit is set to 1.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

sapSubMgmtNonSubTrafficSubProf 1.3.6.1.4.1.6527.3.1.2.4.3.23.1.8
The value of sapSubMgmtNonSubTrafficSubProf specifies the subscriber profile applicable on this SAP for all non-subscriber traffic. The value of this object is only meaningful if sapSubMgmtSubscriberLimit is set to 1.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapSubMgmtNonSubTrafficSlaProf 1.3.6.1.4.1.6527.3.1.2.4.3.23.1.9
The value of sapSubMgmtNonSubTrafficSlaProf specifies the SLA profile applicable on this SAP for all non-subscriber traffic. The value of this object is only meaningful if sapSubMgmtSubscriberLimit is set to 1.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapSubMgmtMacDaHashing 1.3.6.1.4.1.6527.3.1.2.4.3.23.1.10
The value of sapSubMgmtMacDaHashing specifies whether subscriber traffic egressing a LAG SAP has its egress LAG link selected by a function of the MAC destination address instead of subscriber id. The value of this object is only meaningful if sapSubMgmtAdminStatus is set to 'enabled' and can only be configured for TLS services.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapSubMgmtDefSubIdent 1.3.6.1.4.1.6527.3.1.2.4.3.23.1.11
The value of sapSubMgmtDefSubIdent specifies what is used as the default subscriber identification applicable on this SAP. This value is used in case no other source (like Radius) provides a subscriber identification string. If the value of this objects is set to 'useSapId', the SAP-id is used as the default subscriber identification string. In this case, sapSubMgmtDefSubIdentString must contain the empty string. If the value of this object is set to 'useString', the value of sapSubMgmtDefSubIdentString is used as the default subscriber identification string. In this case, an empty sapSubMgmtDefSubIdentString means that there is no default subscriber identification configured.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER useSapId(1), useString(2)  

sapSubMgmtDefSubIdentString 1.3.6.1.4.1.6527.3.1.2.4.3.23.1.12
The value of sapSubMgmtDefSubIdentString specifies the default subscriber identification string applicable on this SAP.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

sapSubMgmtDefAppProfile 1.3.6.1.4.1.6527.3.1.2.4.3.23.1.13
The value of sapSubMgmtDefAppProfile specifies the default application profile applicable on this SAP. The corresponding profile is defined in TIMETRA-BSX-MIB::tmnxBsxAppProfTable.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapSubMgmtNonSubTrafficAppProf 1.3.6.1.4.1.6527.3.1.2.4.3.23.1.14
The value of sapSubMgmtNonSubTrafficAppProf specifies the application profile applicable on this SAP for all non-subscriber traffic. The value of this object is only meaningful if sapSubMgmtSubscriberLimit is set to 1.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapTlsMstiTable 1.3.6.1.4.1.6527.3.1.2.4.3.24
This table contains Multiple Spanning Tree Instance information for the SAP. Each management VPLS running MSTP can have upto 15 MSTI. An entry in this table is automatically created when a tlsMstiEntry is created.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapTlsMstiEntry

sapTlsMstiEntry 1.3.6.1.4.1.6527.3.1.2.4.3.24.1
Information about a specific MSTI for a SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapTlsMstiEntry  

sapTlsMstiPriority 1.3.6.1.4.1.6527.3.1.2.4.3.24.1.1
The value of the object sapTlsMstiPriority specifies the value of the port priority field which is contained in the most significant 4 bits of the 16-bit Port ID associated with this SAP and MSTI. As only the most significant 4 bits of the value are used, the actual value of this object is limited to multiples of 16: e.g. the agent rounds down the value to one of: 0, 16, 32, .. , 224, 240.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

sapTlsMstiPathCost 1.3.6.1.4.1.6527.3.1.2.4.3.24.1.2
The value of the object sapTlsMstiPathCost specifies the contribution of this port to the MSTI path cost of paths towards the spanning tree regional root which include this port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..200000000  

sapTlsMstiLastMgmtChange 1.3.6.1.4.1.6527.3.1.2.4.3.24.1.3
The value of the object sapTlsMstiLastMgmtChange indicates the value of sysUpTime at the time of the most recent management-initiated change to this SAP MSTI information.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapTlsMstiPortRole 1.3.6.1.4.1.6527.3.1.2.4.3.24.1.4
sapTlsMstiPortRole indicates the current role of the sap in the MSTI as defined by the Spanning Tree Protocol.
Status: current Access: read-only
OBJECT-TYPE    
  StpPortRole  

sapTlsMstiPortState 1.3.6.1.4.1.6527.3.1.2.4.3.24.1.5
The value of the object sapTlsMstiPortState indicates the port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the 'broken' state.
Status: current Access: read-only
OBJECT-TYPE    
  TStpPortState  

sapTlsMstiDesignatedBridge 1.3.6.1.4.1.6527.3.1.2.4.3.24.1.6
The value of the object sapTlsMstiDesignatedBridge indicates the Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment for this MSTI.
Status: current Access: read-only
OBJECT-TYPE    
  BridgeId  

sapTlsMstiDesignatedPort 1.3.6.1.4.1.6527.3.1.2.4.3.24.1.7
The value of the object sapTlsMstiDesignatedPort indicates the Port Identifier of the port on the Designated Bridge for this port's segment for this MSTI.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sapIpipeInfoTable 1.3.6.1.4.1.6527.3.1.2.4.3.25
A table that contains IPIPE specific SAP information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapIpipeInfoEntry

sapIpipeInfoEntry 1.3.6.1.4.1.6527.3.1.2.4.3.25.1
IPIPE specific information about a SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapIpipeInfoEntry  

sapIpipeCeInetAddressType 1.3.6.1.4.1.6527.3.1.2.4.3.25.1.1
The value of the object sapIpipeCeInetAddressType specifies the addresstype of the local end host IP of an IPIPE.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

sapIpipeCeInetAddress 1.3.6.1.4.1.6527.3.1.2.4.3.25.1.2
The type of this address is determined by the value of the sapIpipeCeInetAddressType object. This object specifies the IPv4 address of the local end host of an IPIPE.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress Size(0|4)  

sapIpipeMacRefreshInterval 1.3.6.1.4.1.6527.3.1.2.4.3.25.1.3
The value of sapIpipeMacRefreshInterval specifies the interval between successive attempts to refresh the MAC address of the CE device associated with an Ethernet ipipe SAP. If no other event (such as reception of an ARP request from the CE) occurs that would refresh the MAC address before the end of the interval, an ARP request will be originated from the IPIPE SAP.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

sapIpipeMacAddress 1.3.6.1.4.1.6527.3.1.2.4.3.25.1.4
The value of the object sapIpipeMacAddress specifies the MAC address of an IPIPE Ethernet SAP.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

sapIpipeArpedMacAddress 1.3.6.1.4.1.6527.3.1.2.4.3.25.1.5
The value of the object sapIpipeArpedMacAddress indicates the MAC address of the local end host.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

sapIpipeArpedMacAddressTimeout 1.3.6.1.4.1.6527.3.1.2.4.3.25.1.6
The value of the object sapIpipeArpedMacAddressTimeout indicates the number of seconds to wait for the sapIpipeArpedMacAddress to be re-refreshed.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

sapTodMonitorTable 1.3.6.1.4.1.6527.3.1.2.4.3.26
This table contains information on configurable objects on SAP level, that can be modified by a scheduled policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapTodMonitorEntry

sapTodMonitorEntry 1.3.6.1.4.1.6527.3.1.2.4.3.26.1
Information about ToD policy modifiable config data for a SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapTodMonitorEntry  

sapCurrentIngressIpFilterId 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.1
The value of the object sapCurrentIngressIpFilterId indicates the index in the tIPFilterTable corresponding to the ingress filter applied on this SAP, or zero if no filter is currently active. The active filter may deviate from sapIngressIpFilterId in case it is overruled by a ToD Suite policy.
Status: current Access: read-only
OBJECT-TYPE    
  TFilterID  

sapCurrentIngressIpv6FilterId 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.2
The value of the object sapCurrentIngressIpv6FilterId indicates the index in the tIPv6FilterTable corresponding to the ingress Ipv6 filter applied on this SAP, or zero if no filter is currently active. The active filter may deviate from sapIngressIpv6FilterId in case it is overruled by a ToD Suite policy.
Status: current Access: read-only
OBJECT-TYPE    
  TFilterID  

sapCurrentIngressMacFilterId 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.3
The value of the object sapCurrentIngressMacFilterId indicates the index in the tMacFilterTable corresponding to the ingress Mac filter applied on this SAP, or zero if no filter is currently active. The active filter may deviate from sapIngressMacFilterId in case it is overruled by a ToD Suite policy.
Status: current Access: read-only
OBJECT-TYPE    
  TFilterID  

sapCurrentIngressQosPolicyId 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.4
The value of the object sapCurrentIngressQosPolicyId indicates the index in the tSapIngressTable corresponding to the ingress Qos Policy applied on this SAP, or zero if no filter is currently active. The active filter may deviate from sapIngressQosPolicyId in case it is overruled by a ToD Suite policy.
Status: current Access: read-only
OBJECT-TYPE    
  TSapIngressPolicyID  

sapCurrentIngressQosSchedPlcy 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.5
The value of the object sapCurrentIngressQosSchedPlcy indicates the ingress QoS scheduler on this SAP, or zero if none is currently active. The active policy may deviate from sapIngressQosSchedulerPolicy in case it is overruled by a ToD Suite policy defined on this SAP, or on the multi-service this SAP belongs to.
Status: current Access: read-only
OBJECT-TYPE    
  ServObjName  

sapCurrentEgressIpFilterId 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.6
The value of the object sapCurrentEgressIpFilterId indicates the index in the tIPFilterTable corresponding to the Egress filter applied on this SAP, or zero if no filter is currently active. The active filter may deviate from sapEgressIpFilterId in case it is overruled by a ToD Suite policy.
Status: current Access: read-only
OBJECT-TYPE    
  TFilterID  

sapCurrentEgressIpv6FilterId 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.7
The value of the object sapCurrentEgressIpv6FilterId indicates the index in the tIPv6FilterTable corresponding to the Egress Ipv6 filter applied on this SAP, or zero if no filter is currently active. The active filter may deviate from sapEgressIpv6FilterId in case it is overruled by a ToD Suite policy.
Status: current Access: read-only
OBJECT-TYPE    
  TFilterID  

sapCurrentEgressMacFilterId 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.8
The value of the object sapCurrentEgressMacFilterId indicates the index in the tMacFilterTable corresponding to the Egress Mac filter applied on this SAP, or zero if no filter is currently active. The active filter may deviate from sapEgressMacFilterId in case it is overruled by a ToD Suite policy.
Status: current Access: read-only
OBJECT-TYPE    
  TFilterID  

sapCurrentEgressQosPolicyId 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.9
The value of the object sapCurrentEgressQosPolicyId indicates the index in the tSapEgressTable corresponding to the Egress Qos Policy applied on this SAP, or zero if no filter is currently active. The active filter may deviate from sapEgressQosPolicyId in case it is overruled by a ToD Suite policy.
Status: current Access: read-only
OBJECT-TYPE    
  TSapEgressPolicyID  

sapCurrentEgressQosSchedPlcy 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.10
The value of the object sapCurrentEgressQosSchedPlcy indicates the Egress QoS scheduler on this SAP, or zero if none is currently active. The active policy may deviate from sapEgressQosSchedulerPolicy in case it is overruled by a ToD Suite policy defined on this SAP, or on the multi-customer this SAP belongs to.
Status: current Access: read-only
OBJECT-TYPE    
  ServObjName  

sapIntendedIngressIpFilterId 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.11
The value of the object sapIntendedIngressIpFilterId indicates the index in the tIPFilterTable corresponding to the ingress IP filter that should be applied on this SAP. If it deviates from sapCurrentIngressIpFilterId, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal.
Status: current Access: read-only
OBJECT-TYPE    
  TFilterID  

sapIntendedIngressIpv6FilterId 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.12
The value of the object sapIntendedIngressIpv6FilterId indicates the index in the tIPv6FilterTable corresponding to the ingress Ipv6 filter that should be applied on this SAP. If it deviates from sapCurrentIngressIpv6FilterId, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal.
Status: current Access: read-only
OBJECT-TYPE    
  TFilterID  

sapIntendedIngressMacFilterId 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.13
The value of the object sapIntendedIngressMacFilterId indicates the index in the tMacFilterTable corresponding to the ingress Mac filter that should be applied on this SAP. If it deviates from sapCurrentIngressMacFilterId, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal.
Status: current Access: read-only
OBJECT-TYPE    
  TFilterID  

sapIntendedIngressQosPolicyId 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.14
The value of the object sapIntendedIngressQosPolicyId indicates the index in the tSapIngressTable corresponding to the ingress Qos policy that should be applied on this SAP. If it deviates from sapCurrentIngressQosPolicyId, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal.
Status: current Access: read-only
OBJECT-TYPE    
  TSapIngressPolicyID  

sapIntendedIngressQosSchedPlcy 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.15
The value of the object sapIntendedIngressQosSchedPlcy indicates the ingress QoS scheduler that should be applied on this SAP. If it deviates from sapCurrentIngressQosSchedPlcy, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal.
Status: current Access: read-only
OBJECT-TYPE    
  ServObjName  

sapIntendedEgressIpFilterId 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.16
The value of the object sapIntendedEgressIpFilterId indicates the index in the tIPFilterTable corresponding to the Egress IP filter scheduler that should be applied on this SAP. If it deviates from sapCurrentEgressIpFilterId, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal.
Status: current Access: read-only
OBJECT-TYPE    
  TFilterID  

sapIntendedEgressIpv6FilterId 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.17
The value of the object sapIntendedEgressIpv6FilterId indicates the index in the tIPv6FilterTable corresponding to the Egress IPv6 filter scheduler that should be applied on this SAP. If it deviates from sapCurrentEgressIpv6FilterId, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal.
Status: current Access: read-only
OBJECT-TYPE    
  TFilterID  

sapIntendedEgressMacFilterId 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.18
The value of the object sapIntendedEgressMacFilterId indicates the index in the tMacFilterTable corresponding to the Egress mac filter scheduler that should be applied on this SAP. If it deviates from sapCurrentEgressMacFilterId, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal.
Status: current Access: read-only
OBJECT-TYPE    
  TFilterID  

sapIntendedEgressQosPolicyId 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.19
The value of the object sapIntendedEgressQosPolicyId indicates the index in the tSapEgressTable corresponding to the Egress Qos Policy that should be applied on this SAP. If it deviates from sapCurrentEgressQosPolicyId, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal.
Status: current Access: read-only
OBJECT-TYPE    
  TSapEgressPolicyID  

sapIntendedEgressQosSchedPlcy 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.20
The value of the object sapIntendedEgressQosSchedPlcy indicates the index in the tSapEgressTable corresponding to the Egress Qos Scheduler policy that should be applied on this SAP. If it deviates from sapCurrentEgressQosSchedPlcy, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal.
Status: current Access: read-only
OBJECT-TYPE    
  ServObjName  

sapIngrQosPlcyStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.27
A table that contains Ingress Qos policy related statistics for a SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapIngrQosPlcyStatsEntry

sapIngrQosPlcyStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.27.1
Statistics about a specific Ingress Qos Policy applied on a specific SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapIngrQosPlcyStatsEntry  

sapIgQosPlcyId 1.3.6.1.4.1.6527.3.1.2.4.3.27.1.1
The value of the object sapIgQosPlcyId indicates the row index in the tSapIngressTable corresponding to this ingress QoS policy, or one if no policy is specified.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapIngressPolicyID  

sapIgQosPlcyDroppedHiPrioPackets 1.3.6.1.4.1.6527.3.1.2.4.3.27.1.2
The value of the object sapIgQosPlcyDroppedHiPrioPackets indicates the number of high priority packets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyDroppedHiPrioOctets 1.3.6.1.4.1.6527.3.1.2.4.3.27.1.3
The value of the object sapIgQosPlcyDroppedHiPrioOctets indicates the number of high priority octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyDroppedLoPrioPackets 1.3.6.1.4.1.6527.3.1.2.4.3.27.1.4
The value of the object sapIgQosPlcyDroppedLoPrioPackets indicates the number of low priority packets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyDroppedLoPrioOctets 1.3.6.1.4.1.6527.3.1.2.4.3.27.1.5
The value of the object sapIgQosPlcyDroppedLoPrioOctets indicates the number of low priority octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyForwardedInProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.27.1.6
The value of the object sapIgQosPlcyForwardedInProfPackets indicates the number of in-profile packets (rate below CIR) forwarded by the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyForwardedInProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.27.1.7
The value of the object sapIgQosPlcyForwardedInProfOctets indicates the number of in-profile octets (rate below CIR) forwarded by the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyForwardedOutProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.27.1.8
The value of the object sapIgQosPlcyForwardedOutProfPackets indicates the number of out-of-profile packets (rate above CIR) forwarded by the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyForwardedOutProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.27.1.9
The value of the object sapIgQosPlcyForwardedOutProfOctets indicates the number of out-of-profile octets (rate above CIR) forwarded by the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosPlcyStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.28
A table that contains Egress Qos policy related statistics for a SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEgrQosPlcyStatsEntry

sapEgrQosPlcyStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.28.1
Statistics about a specific Egress Qos Policy applied on a specific SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEgrQosPlcyStatsEntry  

sapEgQosPlcyId 1.3.6.1.4.1.6527.3.1.2.4.3.28.1.1
The value of the object sapEgQosPlcyId indicates the row index in the tSapEgressTable corresponding to this egress QoS policy, or one if no policy is specified.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapEgressPolicyID  

sapEgQosPlcyDroppedInProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.28.1.2
The value of the object sapEgQosPlcyDroppedInProfPackets indicates the number of in-profile packets, as determined by the SAP egress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyDroppedInProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.28.1.3
The value of the object sapEgQosPlcyDroppedInProfOctets indicates the number of in-profile octets, as determined by the SAP egress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyDroppedOutProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.28.1.4
The value of the object sapEgQosPlcyDroppedOutProfPackets indicates the number of out-profile packets, as determined by the SAP egress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyDroppedOutProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.28.1.5
The value of the object sapEgQosPlcyDroppedOutProfOctets indicates the number of out-profile octets, as determined by the SAP egress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyForwardedInProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.28.1.6
The value of the object sapEgQosPlcyForwardedInProfPackets indicates the number of in-profile packets (rate below CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyForwardedInProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.28.1.7
The value of the object sapEgQosPlcyForwardedInProfOctets indicates the number of in-profile octets (rate below CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyForwardedOutProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.28.1.8
The value of the object sapEgQosPlcyForwardedOutProfPackets indicates the number of out-of-profile packets (rate above CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyForwardedOutProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.28.1.9
The value of the object sapEgQosPlcyForwardedOutProfOctets indicates the number of out-of-profile octets (rate above CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosPlcyQueueStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.29
A table that contains ingress QoS queue SAP statistics, per Ingress QoS Policy the queue was used by.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapIngQosPlcyQueueStatsEntry

sapIngQosPlcyQueueStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.29.1
Ingress statistics about a specific SAP's QoS queue for a given Qos policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapIngQosPlcyQueueStatsEntry  

sapIgQosPlcyQueuePlcyId 1.3.6.1.4.1.6527.3.1.2.4.3.29.1.1
The value of the object sapIgQosPlcyQueuePlcyId indicates the row index in the tSapIngressTable corresponding to this ingress QoS policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapIngressPolicyID  

sapIgQosPlcyQueueId 1.3.6.1.4.1.6527.3.1.2.4.3.29.1.2
The index of the ingress QoS queue of this SAP used by the policy indicated by sapIgQosPlcyQueuePlcyId.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapIngQueueId  

sapIgQosPlcyQueueStatsOfferedHiPrioPackets 1.3.6.1.4.1.6527.3.1.2.4.3.29.1.3
The value of sapIgQosPlcyQueueStatsOfferedHiPrioPackets indicates the number of high priority packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyQueueStatsDroppedHiPrioPackets 1.3.6.1.4.1.6527.3.1.2.4.3.29.1.4
The value of sapIgQosPlcyQueueStatsDroppedHiPrioPackets indicates the number of high priority packets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyQueueStatsOfferedLoPrioPackets 1.3.6.1.4.1.6527.3.1.2.4.3.29.1.5
The value of sapIgQosPlcyQueueStatsOfferedLoPrioPackets indicates the number of low priority packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyQueueStatsDroppedLoPrioPackets 1.3.6.1.4.1.6527.3.1.2.4.3.29.1.6
The value of sapIgQosPlcyQueueStatsDroppedLoPrioPackets indicates the number of low priority packets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyQueueStatsOfferedHiPrioOctets 1.3.6.1.4.1.6527.3.1.2.4.3.29.1.7
The value of sapIgQosPlcyQueueStatsOfferedHiPrioOctets indicates the number of high priority octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyQueueStatsDroppedHiPrioOctets 1.3.6.1.4.1.6527.3.1.2.4.3.29.1.8
The value of sapIgQosPlcyQueueStatsDroppedHiPrioOctets indicates the number ofhigh priority octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyQueueStatsOfferedLoPrioOctets 1.3.6.1.4.1.6527.3.1.2.4.3.29.1.9
The value of sapIgQosPlcyQueueStatsOfferedLoPrioOctets indicates the number of low priority octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyQueueStatsDroppedLoPrioOctets 1.3.6.1.4.1.6527.3.1.2.4.3.29.1.10
The value of sapIgQosPlcyQueueStatsDroppedLoPrioOctets indicates the number of low priority octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyQueueStatsForwardedInProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.29.1.11
The value of sapIgQosPlcyQueueStatsForwardedInProfPackets indicates the number of in-profile packets (rate below CIR) forwarded by the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyQueueStatsForwardedOutProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.29.1.12
The value of sapIgQosPlcyQueueStatsForwardedOutProfPackets indicates the number of out-of-profile packets (rate above CIR) forwarded by the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyQueueStatsForwardedInProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.29.1.13
The value of sapIgQosPlcyQueueStatsForwardedInProfOctets indicates the number of in-profile octets (rate below CIR) forwarded by the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyQueueStatsForwardedOutProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.29.1.14
The value of sapIgQosPlcyQueueStatsForwardedOutProfOctets indicates the number of out-of-profile octets (rate above CIR) forwarded by the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyQueueCustId 1.3.6.1.4.1.6527.3.1.2.4.3.29.1.15
The value of the object sapIgQosPlcyQueueCustId indicates the Customer ID for the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapIgQosPlcyQueueStatsUncoloredPacketsOffered 1.3.6.1.4.1.6527.3.1.2.4.3.29.1.16
The value of sapIgQosPlcyQueueStatsUncoloredPacketsOffered indicates the number of uncolored packets offered to the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyQueueStatsUncoloredOctetsOffered 1.3.6.1.4.1.6527.3.1.2.4.3.29.1.17
The value of sapIgQosPlcyQueueStatsUncoloredOctetsOffered indicates the number of uncolored octets offered to the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosPlcyQueueStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.30
A table that contains egress QoS queue SAP statistics per Egress QoS Policy the queue was used by.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEgrQosPlcyQueueStatsEntry

sapEgrQosPlcyQueueStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.30.1
Egress statistics about a specific SAP's QoS queue for a given Qos policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEgrQosPlcyQueueStatsEntry  

sapEgQosPlcyQueuePlcyId 1.3.6.1.4.1.6527.3.1.2.4.3.30.1.1
The row index in the tSapEgressTable corresponding to this egress QoS policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapEgressPolicyID  

sapEgQosPlcyQueueId 1.3.6.1.4.1.6527.3.1.2.4.3.30.1.2
The value of sapEgQosPlcyQueueId indicates index of the egress QoS queue of this SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapEgrQueueId  

sapEgQosPlcyQueueStatsForwardedInProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.30.1.3
The value of sapEgQosPlcyQueueStatsForwardedInProfPackets indicates the number of in-profile packets (rate below CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyQueueStatsDroppedInProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.30.1.4
The value of sapEgQosPlcyQueueStatsDroppedInProfPackets indicates the number of in-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyQueueStatsForwardedOutProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.30.1.5
The value of sapEgQosPlcyQueueStatsForwardedOutProfPackets indicates the number of out-of-profile packets (rate above CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyQueueStatsDroppedOutProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.30.1.6
The value of sapEgQosPlcyQueueStatsDroppedOutProfPackets indicates the number out-of-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyQueueStatsForwardedInProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.30.1.7
The value of sapEgQosPlcyQueueStatsForwardedInProfOctets indicates the number ofin-profile octets (rate below CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyQueueStatsDroppedInProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.30.1.8
The value of sapEgQosPlcyQueueStatsDroppedInProfOctets indicates the number in-profile octets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyQueueStatsForwardedOutProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.30.1.9
The value of sapEgQosPlcyQueueStatsForwardedOutProfOctets indicates the number of out-of-profile octets (rate above CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyQueueStatsDroppedOutProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.30.1.10
The value of sapEgQosPlcyQueueStatsDroppedOutProfOctets indicates the number out-of-profile octets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyQueueCustId 1.3.6.1.4.1.6527.3.1.2.4.3.30.1.11
The value of the object sapEgQosPlcyQueueCustId indicates the Customer ID for the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapDhcpInfoTable 1.3.6.1.4.1.6527.3.1.2.4.3.31
sapDhcpInfoTable contains DHCP information related to a routed CO subscriber SAP. This table complements sapBaseInfoTable, and contains an entry for each routed CO subscriber SAP. Rows in this table are created and deleted automatically by the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapDhcpInfoEntry

sapDhcpInfoEntry 1.3.6.1.4.1.6527.3.1.2.4.3.31.1
DHCP specific information for a routed CO subscriber SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapDhcpInfoEntry  

sapDhcpOperLeasePopulate 1.3.6.1.4.1.6527.3.1.2.4.3.31.1.1
The value of the object sapDhcpOperLeasePopulate indicates the number of DHCP lease states currently allocated on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sapIngSchedPlcyStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.32
A table that contains ingress QoS queue statistics for the SAP's, organized by scheduler policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapIngSchedPlcyStatsEntry

sapIngSchedPlcyStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.32.1
Statistics about a specific SAP's ingress Qos Scheduler. Entries are created when a scheduler policy of a SAP is replaced with another one due to Time-Of-Day policies.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapIngSchedPlcyStatsEntry  

sapIngSchedPlcyStatsFwdPkt 1.3.6.1.4.1.6527.3.1.2.4.3.32.1.1
The number of forwarded packets, as determined by the SAP ingress scheduler policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngSchedPlcyStatsFwdOct 1.3.6.1.4.1.6527.3.1.2.4.3.32.1.2
The number of forwarded octets, as determined by the SAP ingress scheduler policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrSchedPlcyStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.33
A table that contains egress QoS scheduler statistics for the SAP's, organized by scheduler policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEgrSchedPlcyStatsEntry

sapEgrSchedPlcyStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.33.1
Statistics about a specific SAP's egress QoS scheduler. Entries are created when a scheduler policy of a SAP is replaced with another one due to Time-Of-Day policies.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEgrSchedPlcyStatsEntry  

sapEgrSchedPlcyStatsFwdPkt 1.3.6.1.4.1.6527.3.1.2.4.3.33.1.1
The number of packets forwarded by the egress Qchip, as determined by the SAP egress scheduler policy.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrSchedPlcyStatsFwdOct 1.3.6.1.4.1.6527.3.1.2.4.3.33.1.2
The number of octets forwarded by the egress Qchip, as determined by the SAP egress scheduler policy.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngSchedPlcyPortStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.34
The sapIngSchedPlcyPortStatsTable contains ingress QoS scheduler statistics for the SAP's, organized per scheduler policy and per port. This table is used when the SAP is a CCAG or LAG in 'link' mode, or an APS. Entries are created when a scheduler policy of a SAP is replaced with another one due to Time-Of-Day policies.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapIngSchedPlcyPortStatsEntry

sapIngSchedPlcyPortStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.34.1
Statistics about a specific SAP's ingress Qos Scheduler. Entries are created when a scheduler policy of a SAP is replaced with another one due to Time-Of-Day policies.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapIngSchedPlcyPortStatsEntry  

sapIngSchedPlcyPortStatsPort 1.3.6.1.4.1.6527.3.1.2.4.3.34.1.1
The value of sapIngSchedPlcyPortStatsPort is used as an index of the ingress QoS scheduler of this SAP. When the SAP is an aps/ccag/lag in 'link' mode, this object is the TmnxPortID of the member-port on which the scheduler is applied.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxPortID  

sapIngSchedPlcyPortStatsFwdPkt 1.3.6.1.4.1.6527.3.1.2.4.3.34.1.2
The value of sapIngSchedPlcyPortStatsFwdPkt indicates the number of forwarded packets, as determined by the SAP ingress scheduler policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngSchedPlcyPortStatsFwdOct 1.3.6.1.4.1.6527.3.1.2.4.3.34.1.3
The value of sapIngSchedPlcyPortStatsFwdOct indicates the number of forwarded octets,as determined by the SAP ingress scheduler policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrSchedPlcyPortStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.35
The sapEgrSchedPlcyPortStatsTable contains egress QoS scheduler statistics for the SAP's, organized per scheduler policy and per port. This table is used when the SAP is a CCAG or LAG in 'link' mode, or an APS. Entries are created when a scheduler policy of a SAP is replaced with another one due to Time-Of-Day policies.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEgrSchedPlcyPortStatsEntry

sapEgrSchedPlcyPortStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.35.1
Statistics about a specific SAP's egress Qos Scheduler. Entries are created when a scheduler policy of a SAP is replaced with another one due to Time-Of-Day policies.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEgrSchedPlcyPortStatsEntry  

sapEgrSchedPlcyPortStatsPort 1.3.6.1.4.1.6527.3.1.2.4.3.35.1.1
The value of sapEgrSchedPlcyPortStatsPort is used as an index of the egress QoS scheduler of this SAP. When the SAP is an aps/ccag/lag in 'link' mode, this object is the TmnxPortID of the member-port on which the scheduler is applied.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxPortID  

sapEgrSchedPlcyPortStatsFwdPkt 1.3.6.1.4.1.6527.3.1.2.4.3.35.1.2
The value of sapEgrSchedPlcyPortStatsFwdPkt indicates the number of forwarded packets, as determined by the SAP egress scheduler policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrSchedPlcyPortStatsFwdOct 1.3.6.1.4.1.6527.3.1.2.4.3.35.1.3
The value of sapEgrSchedPlcyPortStatsFwdOct indicates the number of forwarded octets,as determined by the SAP egress scheduler policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapCemInfoTable 1.3.6.1.4.1.6527.3.1.2.4.3.40
A table that contains CEM SAP information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapCemInfoEntry

sapCemInfoEntry 1.3.6.1.4.1.6527.3.1.2.4.3.40.1
Information about a specific CEM SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapCemInfoEntry  

sapCemLastMgmtChange 1.3.6.1.4.1.6527.3.1.2.4.3.40.1.1
The value of the object sapCemLastMgmtChange indicates the value of sysUpTime at the time of the most recent management-initiated change to this CEM SAP information.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapCemEndpointType 1.3.6.1.4.1.6527.3.1.2.4.3.40.1.2
This object indicates the CEM SAP endpoint type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unstructuredE1(1), unstructuredT1(2), unstructuredE3(3), unstructuredT3(4), nxDS0(5), nxDS0WithCas(6)  

sapCemBitrate 1.3.6.1.4.1.6527.3.1.2.4.3.40.1.3
This object indicates the bit-rate in multiples of 64 Kbit/s of the CEM SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..699  

sapCemCasTrunkFraming 1.3.6.1.4.1.6527.3.1.2.4.3.40.1.4
This object indicates the CAS trunk framing mode of the CEM SAP.
Status: current Access: read-only
OBJECT-TYPE    
  TdmOptionsCasTrunkFraming  

sapCemPayloadSize 1.3.6.1.4.1.6527.3.1.2.4.3.40.1.5
This object specifies the payload size (in bytes) of packets transmitted to the Packet Service Network (PSN) by the CEM SAP. This determines the size of the data that will be transmitted over the service. As well, if the size of the data received is not consistent with the payload size then the packet is considered malformed. Default value depends on the CEM SAP endpoint type (sapCemEndpointType), and if applicable, the number of timeslots (sapCemBitrate): --------------------------------------------------------- | Endpoint Type | Timeslots | Default payload size | ---------------------+-----------+----------------------- | 'unstructuredE1' | n/a | 256 bytes | ---------------------+-----------+----------------------- | 'unstructuredT1' | n/a | 192 bytes | ---------------------+-----------+----------------------- | 'unstructuredE3' | n/a | 1024 bytes | ---------------------+-----------+----------------------- | 'unstructuredT3' | n/a | 1024 bytes | ---------------------+-----------+----------------------- | 'nxDS0' (E1/T1) | N = 1 | 64 bytes | | +-----------+----------------------- | | N = 2..4 | N x 32 bytes | | +-----------+----------------------- | | N = 5..15 | N x 16 bytes | | +-----------+----------------------- | | N >= 16 | N x 8 bytes | ---------------------+-----------+----------------------- | 'nxDS0WithCas' (E1)| N | N x 16 bytes | ---------------------+-----------+----------------------- | 'nxDS0WithCas' (T1)| N | N x 24 bytes | --------------------------------------------------------- For all endpoint types except for 'nxDS0WithCas', valid payload size range is from the default (in the table above) to 2048 bytes. For 'nxDS0WithCas', sapCemPayloadSize divide by the number of timeslots (sapCemBitrate) must be an integer factor of the number of frames per trunk multiframe (i.e. 16 for E1 trunk and 24 for T1 trunk). For '1xDS0', sapCemPayloadSize must be a multiple of 2. For 'NxDS0', where N > 1, sapCemPayloadSize must be a multiple of the number of timeslots (sapCemBitrate). For 'unstructuredE1', 'unstructuredT1', 'unstructuredE3' and 'unstructuredT3', sapCemPayloadSize must be a multiple of 32 bytes. Configuring sapCemPayloadSize and sapCemJitterBuffer to values that result in less than 2 packet buffers or greater than 32 packet buffer is not allowed. Setting this object to 0 sets it back to the default value.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 16..2048  

sapCemJitterBuffer 1.3.6.1.4.1.6527.3.1.2.4.3.40.1.6
This object specifies the jitter buffer size in milliseconds (ms). Default value depends on the CEM SAP endpoint type (sapCemEndpointType), and if applicable, the number of timeslots (sapCemBitrate): --------------------------------------------------------- | Endpoint Type | Timeslots | Default jitter buf. | ---------------------+-----------+----------------------- | 'unstructuredE1' | n/a | 5 ms | ---------------------+-----------+----------------------- | 'unstructuredT1' | n/a | 5 ms | ---------------------+-----------+----------------------- | 'unstructuredE3' | n/a | 5 ms | ---------------------+-----------+----------------------- | 'unstructuredT3' | n/a | 5 ms | ---------------------+-----------+----------------------- | 'nxDS0' (E1/T1) | N = 1 | 32 ms | | +-----------+----------------------- | | N = 2..4 | 16 ms | | +-----------+----------------------- | | N = 5..15 | 8 ms | | +-----------+----------------------- | | N >= 16 | 5 ms | ---------------------+-----------+----------------------- | 'nxDS0WithCas' (E1)| N | 8 ms | ---------------------+-----------+----------------------- | 'nxDS0WithCas' (T1)| N | 12 ms | --------------------------------------------------------- Configuring sapCemPayloadSize and sapCemJitterBuffer to values that result in less than 2 packet buffers or greater than 32 packet buffers is not allowed. The valid range is 1 to 250 ms. Setting this object to 0 sets it back to the default value.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 1..250  

sapCemUseRtpHeader 1.3.6.1.4.1.6527.3.1.2.4.3.40.1.7
This object specifies whether a RTP header is used when packets are transmitted to the Packet Service Network (PSN) by the CEM SAP.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sapCemDifferential 1.3.6.1.4.1.6527.3.1.2.4.3.40.1.8
This object specifies whether this CEM SAP is in differential mode.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sapCemTimestampFreq 1.3.6.1.4.1.6527.3.1.2.4.3.40.1.9
This object specifies whether the value of the timestamp frequency in multiples of 8 KHz for this CEM SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sapCemReportAlarm 1.2.3.4.5.1.3.6.1.4.1.6527.3.1.2.4.3.40.1.10
The value of sapCemReportAlarm determines when and if to generate notifications for the CEM SAP.
Status: current Access: read-write
OBJECT-TYPE    
  CemSapReportAlarm  

sapCemReportAlarmStatus 1.3.6.1.4.1.6527.3.1.2.4.3.40.1.11
The value of sapCemReportAlarmStatus indicates the current alarms on this CEM SAP.
Status: current Access: read-only
OBJECT-TYPE    
  CemSapReportAlarm  

sapCemLocalEcid 1.3.6.1.4.1.6527.3.1.2.4.3.40.1.12
The value of the object sapCemLocalEcid specifies the local ECID. Only valid if CEM SAP belongs to an EPIPE service.
Status: current Access: read-write
OBJECT-TYPE    
  CemSapEcid  

sapCemRemoteMacAddr 1.3.6.1.4.1.6527.3.1.2.4.3.40.1.13
The value of the object sapCemRemoteMacAddr specifies the remote MAC address. Only valid if CEM SAP belongs to an EPIPE service.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

sapCemRemoteEcid 1.3.6.1.4.1.6527.3.1.2.4.3.40.1.14
The value of the object sapCemRemoteEcid specifies the remote ECID. Only valid if CEM SAP belongs to an EPIPE service.
Status: current Access: read-write
OBJECT-TYPE    
  CemSapEcid  

sapCemStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.41
A table that contains CEM SAP statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapCemStatsEntry

sapCemStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.41.1
Statistics for a specific CEM SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapCemStatsEntry  

sapCemStatsIngressForwardedPkts 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.1
The value of sapCemStatsIngressForwardedPkts indicates the number of packets that were successfully forwarded.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCemStatsIngressDroppedPkts 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.2
The value of sapCemStatsIngressDroppedPkts indicates the total number of packets that were dropped due to errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCemStatsEgressForwardedPkts 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.3
The value of sapCemStatsEgressForwardedPkts indicates the number of packets that were successfully forwarded.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCemStatsEgressDroppedPkts 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.4
The value of sapCemStatsEgressDroppedPkts indicates the total number of packets that were dropped due to errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCemStatsEgressMissingPkts 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.5
The value of sapCemStatsEgressMissingPkts indicates the number of missing packets (as detected via control word sequence number gaps).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCemStatsEgressPktsReOrder 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.6
The value of sapCemStatsEgressPktsReOrder indicates the number of packets detected out of sequence (via control word sequence number), but successfully re-ordered.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCemStatsEgressJtrBfrUnderruns 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.7
The value of sapCemStatsEgressJtrBfrUnderruns indicates the number of times a packet needed to be played out and the jitter buffer was empty.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCemStatsEgressJtrBfrOverruns 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.8
The value of sapCemStatsEgressJtrBfrOverruns indicates the number of times a packet was dropped because it could not fit in the jitter buffer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCemStatsEgressMisOrderDropped 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.9
The value of sapCemStatsEgressMisOrderDropped indicates the number of packets detected out of order (via control word sequence numbers), and could not be re-ordered, or could not be placed in the jitter buffer because it was out of the current window.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCemStatsEgressMalformedPkts 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.10
The value of sapCemStatsEgressMalformedPkts indicates the number of packets detected with unexpected size, or bad headers' stack.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCemStatsEgressLBitDropped 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.11
The value of sapCemStatsEgressLBitDropped indicates the number of packets dropped due to the L bit set by the far end.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCemStatsEgressMultipleDropped 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.12
The value of sapCemStatsEgressMultipleDropped indicates the number of packets dropped due to multiple sequence numbers.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCemStatsEgressESs 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.13
The value of sapCemStatsEgressESs indicates the number of Error Seconds (ESs) encountered. Any malformed packet, seq. error, LOPS and similar are considered as error seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCemStatsEgressSESs 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.14
The value of sapCemStatsEgressSESs indicates the number of Severely Error Seconds (SESs) encountered. This is when more than 30 percent of the packets within a one second window are missing.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCemStatsEgressUASs 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.15
The value of sapCemStatsEgressUASs indicates the number of Unavailable Seconds (UASs) encountered. Any consecutive ten seconds of SESs are counted as one UAS.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCemStatsEgressFailureCounts 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.16
The value of sapCemStatsEgressFailureCounts indicates the number failure events. A failure event begins when the LOPS failure is declared, and ends when the failure is cleared.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCemStatsEgressUnderrunCounts 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.17
The value of sapCemStatsEgressUnderrunCounts indicates the number of times the jitter buffer went into an underrun state.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCemStatsEgressOverrunCounts 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.18
The value of sapCemStatsEgressOverrunCounts indicates the number of times the jitter buffer went into an overrun state.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.42
A table that contains SAP Layer 2 Protocol Tunneling Statistics. This table complements sapTlsInfoTable. Rows in this table are created and deleted automatically by the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapTlsL2ptStatsEntry

sapTlsL2ptStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.42.1
Layer 2 Protocol Tunneling Statistics for a specific SAP. The statistics are provided for each combination of Destination Address and LLC SNAP type.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapTlsL2ptStatsEntry  

sapTlsL2ptStatsLastClearedTime 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.1
The value of sapTlsL2ptStatsLastClearedTime indicates the last time that these stats were cleared. The value zero indicates that they have not been cleared yet.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapTlsL2ptStatsL2ptEncapStpConfigBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.2
The value of sapTlsL2ptStatsL2ptEncapStpConfigBpdusRx indicates the number of L2PT encapsulated STP config bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapStpConfigBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.3
The value of sapTlsL2ptStatsL2ptEncapStpConfigBpdusTx indicates the number of L2PT encapsulated STP config bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapStpRstBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.4
The value of sapTlsL2ptStatsL2ptEncapStpRstBpdusRx indicates the number of L2PT encapsulated STP rst bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapStpRstBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.5
The value of sapTlsL2ptStatsL2ptEncapStpRstBpdusTx indicates the number of L2PT encapsulated STP rst bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapStpTcnBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.6
The value of sapTlsL2ptStatsL2ptEncapStpTcnBpdusRx indicates the number of L2PT encapsulated STP tcn bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapStpTcnBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.7
The value of sapTlsL2ptStatsL2ptEncapStpTcnBpdusTx indicates the number of L2PT encapsulated STP tcn bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapPvstConfigBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.8
The value of sapTlsL2ptStatsL2ptEncapPvstConfigBpdusRx indicates the number of L2PT encapsulated PVST config bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapPvstConfigBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.9
The value of sapTlsL2ptStatsL2ptEncapPvstConfigBpdusTx indicates the number of L2PT encapsulated PVST config bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapPvstRstBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.10
The value of sapTlsL2ptStatsL2ptEncapPvstRstBpdusRx indicates the number of L2PT encapsulated PVST rst bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapPvstRstBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.11
The value of sapTlsL2ptStatsL2ptEncapPvstRstBpdusTx indicates the number of L2PT encapsulated PVST rst bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapPvstTcnBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.12
The value of sapTlsL2ptStatsL2ptEncapPvstTcnBpdusRx indicates the number of L2PT encapsulated PVST tcn bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapPvstTcnBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.13
The value of sapTlsL2ptStatsL2ptEncapPvstTcnBpdusTx indicates the number of L2PT encapsulated PVST tcn bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsStpConfigBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.14
The value of sapTlsL2ptStatsStpConfigBpdusRx indicates the number of STP config bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsStpConfigBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.15
The value of sapTlsL2ptStatsStpConfigBpdusTx indicates the number of STP config bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsStpRstBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.16
The value of sapTlsL2ptStatsStpRstBpdusRx indicates the number of STP rst bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsStpRstBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.17
The value of sapTlsL2ptStatsStpRstBpdusTx indicates the number of STP rst bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsStpTcnBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.18
The value of sapTlsL2ptStatsStpTcnBpdusRx indicates the number of STP tcn bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsStpTcnBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.19
The value of sapTlsL2ptStatsStpTcnBpdusTx indicates the number of STP tcn bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsPvstConfigBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.20
The value of sapTlsL2ptStatsPvstConfigBpdusRx indicates the number of PVST config bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsPvstConfigBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.21
The value of sapTlsL2ptStatsPvstConfigBpdusTx indicates the number of PVST config bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsPvstRstBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.22
The value of sapTlsL2ptStatsPvstRstBpdusRx indicates the number of PVST rst bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsPvstRstBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.23
The value of sapTlsL2ptStatsPvstRstBpdusTx indicates the number of PVST rst bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsPvstTcnBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.24
The value of sapTlsL2ptStatsPvstTcnBpdusRx indicates the number of PVST tcn bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsPvstTcnBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.25
The value of sapTlsL2ptStatsPvstTcnBpdusTx indicates the number of PVST tcn bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsOtherBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.26
The value of sapTlsL2ptStatsOtherBpdusRx indicates the number of other bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsOtherBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.27
The value of sapTlsL2ptStatsOtherBpdusTx indicates the number of other bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsOtherL2ptBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.28
The value of sapTlsL2ptStatsOtherL2ptBpdusRx indicates the number of other L2PT bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsOtherL2ptBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.29
The value of sapTlsL2ptStatsOtherL2ptBpdusTx indicates the number of other L2PT bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsOtherInvalidBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.30
The value of sapTlsL2ptStatsOtherInvalidBpdusRx indicates the number of other invalid bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsOtherInvalidBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.31
The value of sapTlsL2ptStatsOtherInvalidBpdusTx indicates the number of other invalid bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapCdpBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.32
The value of sapTlsL2ptStatsL2ptEncapCdpBpdusRx indicates the number of L2PT encapsulated CDP bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapCdpBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.33
The value of sapTlsL2ptStatsL2ptEncapCdpBpdusTx indicates the number of L2PT encapsulated CDP bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapVtpBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.34
The value of sapTlsL2ptStatsL2ptEncapVtpBpdusRx indicates the number of L2PT encapsulated VTP bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapVtpBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.35
The value of sapTlsL2ptStatsL2ptEncapVtpBpdusTx indicates the number of L2PT encapsulated VTP bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapDtpBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.36
The value of sapTlsL2ptStatsL2ptEncapDtpBpdusRx indicates the number of L2PT encapsulated DTP bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapDtpBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.37
The value of sapTlsL2ptStatsL2ptEncapDtpBpdusTx indicates the number of L2PT encapsulated DTP bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapPagpBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.38
The value of sapTlsL2ptStatsL2ptEncapPagpBpdusRx indicates the number of L2PT encapsulated PAGP bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapPagpBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.39
The value of sapTlsL2ptStatsL2ptEncapPagpBpdusTx indicates the number of L2PT encapsulated PAGP bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapUdldBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.40
The value of sapTlsL2ptStatsL2ptEncapUdldBpdusRx indicates the number of L2PT encapsulated UDLD bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapUdldBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.41
The value of sapTlsL2ptStatsL2ptEncapUdldBpdusTx indicates the number of L2PT encapsulated UDLD bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsCdpBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.42
The value of sapTlsL2ptStatsCdpBpdusRx indicates the number of CDP bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsCdpBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.43
The value of sapTlsL2ptStatsCdpBpdusTx indicates the number of CDP bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsVtpBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.44
The value of sapTlsL2ptStatsVtpBpdusRx indicates the number of VTP bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsVtpBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.45
The value of sapTlsL2ptStatsVtpBpdusTx indicates the number of VTP bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsDtpBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.46
The value of sapTlsL2ptStatsDtpBpdusRx indicates the number of DTP bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsDtpBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.47
The value of sapTlsL2ptStatsDtpBpdusTx indicates the number of DTP bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsPagpBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.48
The value of sapTlsL2ptStatsPagpBpdusRx indicates the number of PAGP bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsPagpBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.49
The value of sapTlsL2ptStatsPagpBpdusTx indicates the number of PAGP bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsUdldBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.50
The value of sapTlsL2ptStatsUdldBpdusRx indicates the number of UDLD bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsUdldBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.51
The value of sapTlsL2ptStatsUdldBpdusTx indicates the number of UDLD bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEthernetInfoTable 1.3.6.1.4.1.6527.3.1.2.4.3.43
A table that contains Ethernet SAP information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEthernetInfoEntry

sapEthernetInfoEntry 1.3.6.1.4.1.6527.3.1.2.4.3.43.1
Information about a specific Ethernet SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEthernetInfoEntry  

sapEthernetLLFAdminStatus 1.3.6.1.4.1.6527.3.1.2.4.3.43.1.1
sapEthernetLLFAdminStatus specifies whether or not Link- Loss Forwarding is enabled ('up'). When this object is set to 'up' the underlying port will be forced into the operationally 'down' state if the service is operationally 'down', or any of the 'sdpBindPwPeerStatusBits' are set, and will set the underlying port's tmnxPortEtherReasonDownFlags 'linklossFwd' bit. Setting this object to 'down' will clear the 'linklossFwd' reason. sapEthernetLLFAdminStatus can only be enabled on saps configured for an EPIPE service using an Ethernet port with the tmnxPortEncapType set to 'nullEncap.'
Status: current Access: read-create
OBJECT-TYPE    
  ServiceAdminStatus  

sapEthernetLLFOperStatus 1.3.6.1.4.1.6527.3.1.2.4.3.43.1.2
sapEthernetLLFOperStatus indicates whether or not the underlying port is forced operationally 'down' due to the service being operationally 'down' or an sdpBindPwPeerStatusBits bit is set. sapEthernetLLFOperStatus is set to 'fault' when the sapEthernetLLFAdminStatus is set to 'up,' and either a fault has occurred on the pseudo-wire, or the service is down, otherwise sapEthernetLLFOperStatus is set to 'clear.'
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER fault(1), clear(2)  

msapPlcyTable 1.3.6.1.4.1.6527.3.1.2.4.3.44
The msapPlcyTable has an entry for each managed SAP(MSAP) policy configured in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MsapPlcyEntry

msapPlcyEntry 1.3.6.1.4.1.6527.3.1.2.4.3.44.1
Each entry represents the configuration for a managed SAP(MSAP) policy. The values for each entry will be used to populate the following tables when the MSAP policy is applied to a MSAP: ALCATEL-IND1-TIMETRA-SAP-MIB::sapBaseInfoTable ALCATEL-IND1-TIMETRA-SAP-MIB::sapSubMgmtInfoTable
Status: current Access: not-accessible
OBJECT-TYPE    
  MsapPlcyEntry  

msapPlcyName 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.1
The value of msapPlcyName specifies the name of the MSAP policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

msapPlcyRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.2
The value of msapPlcyRowStatus is used for the creation and deletion of MSAP policies.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

msapPlcyLastChanged 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.3
The value of msapPlcyLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

msapPlcyDescription 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.4
The value of msapPlcyDescription specifies the description of the MSAP policy.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

msapPlcyCpmProtPolicyId 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.5
The value of msapPlcyCpmProtPolicyId specifies a CPM Protection policy for the MSAP policy. If a corresponding policy is not defined in TIMETRA-SECURITY-MIB::tmnxCpmProtPolTable, an 'inconsistentValue' error will be returned. A value of one specifies that the default CPM Protection policy is associated with the Managed SAP. This object is not supported on SR-1 and ESS-1, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5', and 7710, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'. An attempt to set msapPlcyCpmProtPolicyId to a non-zero value on one of these unsupported chassis types will return an 'inconsistentValue' error.
Status: current Access: read-create
OBJECT-TYPE    
  TCpmProtPolicyID  

msapPlcyCpmProtMonitorMac 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.6
The value of msapPlcyCpmProtMonitorMac specifies whether the tmnxCpmProtPolPerSrcRateLimit of the CPM Protection policy, as specified by msapPlcyCpmProtPolicyId, must be applied. If the value of msapPlcyCpmProtMonitorMac is 'true', the per-source rate limit must be applied. If the value of msapPlcyCpmProtPolicyId is equal to zero, the value of msapPlcyCpmProtMonitorMac is irrelevant and will be ignored. This object is not supported on SR-1 and ESS-1, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5', and 7710, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'. An attempt to set msapPlcyCpmProtMonitorMac to 'true' on one of these unsupported chassis types will return an 'inconsistentValue' error.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

msapPlcySubMgmtDefSubId 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.7
The value of msapPlcySubMgmtDefSubId specifies what will be used as the default subscriber identification applicable on the MSAP. This value is used in case no other source (like Radius) provides a subscriber identification string. If the value of this object is set to 'useSapId', the SAP-id will be used as the default subscriber identification string. In this case, msapPlcySubMgmtDefSubIdStr must contain the empty string, so any non-empty string in msapPlcySubMgmtDefSubIdStr will be set to an empty string. If the value of this object is set to 'useString', the value of msapPlcySubMgmtDefSubIdStr will be used as the default subscriber identification string. In this case, an empty msapPlcySubMgmtDefSubIdStr means that there is no default subscriber identification configured.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER useSapId(1), useString(2)  

msapPlcySubMgmtDefSubIdStr 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.8
The value of msapPlcySubMgmtDefSubIdStr specifies the default subscriber identification string applicable on this MSAP.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

msapPlcySubMgmtDefSubProfile 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.9
The value of msapPlcySubMgmtDefSubProfile specifies the default subscriber profile applicable on the MSAP. If a corresponding profile is not defined in tmnxSubProfileTable, an 'inconsistentValue' error will be returned. A value of 'default' is not allowed for this object.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

msapPlcySubMgmtDefSlaProfile 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.10
The value of msapPlcySubMgmtDefSlaProfile specifies the default SLA profile applicable on the MSAP. If a corresponding profile is not defined in tmnxSLAProfileTable, an 'inconsistentValue' error will be returned.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

msapPlcySubMgmtDefAppProfile 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.11
The value of msapPlcySubMgmtDefAppProfile specifies the default application profile applicable on the MSAP. If a corresponding profile is not defined in TIMETRA-BSX-MIB::tmnxBsxAppProfTable, an 'inconsistentValue' error will be returned.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

msapPlcySubMgmtSubIdPlcy 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.12
The value of msapPlcySubMgmtSubIdPlcy specifies the subscriber identification policy applicable on the MSAP. If a corresponding profile is not defined in tmnxSubIdentPolicyTable, an 'inconsistentValue' error will be returned.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

msapPlcySubMgmtSubscriberLimit 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.13
The value of msapPlcySubMgmtSubscriberLimit specifies the maximum number of subscribers allowed for the MSAP. A value is 0 means there is no limit. The values for the objects msapPlcySubMgmtProfiledTrafOnly, msapPlcySubMgmtNonSubTrafSubProf, and msapPlcySubMgmtNonSubTrafSlaProf are only meaningful when the value of msapPlcySubMgmtSubscriberLimit is 1 and will not be used when the value of msapPlcySubMgmtSubscriberLimit is not 1.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..8000  

msapPlcySubMgmtProfiledTrafOnly 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.14
The value of msapPlcySubMgmtProfiledTrafOnly specifies whether only profiled traffic is applicable for the MSAP. If set to 'true', the MSAP queues will be deleted. The value of this object is only meaningful if msapPlcySubMgmtSubscriberLimit is set to 1.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

msapPlcySubMgmtNonSubTrafSubId 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.15
The value of msapPlcySubMgmtNonSubTrafSubId specifies the subscriber identification applicable on the MSAP for all non-subscriber traffic. The value of this object is only meaningful if msapPlcySubMgmtSubscriberLimit is set to 1.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

msapPlcySubMgmtNonSubTrafSubProf 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.16
The value of msapPlcySubMgmtNonSubTrafSubProf specifies the subscriber profile applicable on the MSAP for all non-subscriber traffic. The value of this object is only meaningful if msapPlcySubMgmtSubscriberLimit is set to 1.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

msapPlcySubMgmtNonSubTrafSlaProf 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.17
The value of msapPlcySubMgmtNonSubTrafSlaProf specifies the SLA profile applicable on the MSAP for all non-subscriber traffic. The value of this object is only meaningful if msapPlcySubMgmtSubscriberLimit is set to 1.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

msapPlcySubMgmtNonSubTrafAppProf 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.18
The value of msapPlcySubMgmtNonSubTrafAppProf specifies the Application profile applicable on the MSAP for all non-subscriber traffic. The value of this object is only meaningful if msapPlcySubMgmtSubscriberLimit is set to 1.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

msapPlcyAssociatedMsaps 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.19
The value of msapPlcyAssociatedMsaps indicates the number of MSAPs associated with this MSAP policy.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

msapTlsPlcyTable 1.3.6.1.4.1.6527.3.1.2.4.3.45
The msapTlsPlcyTable has an entry for each managed SAP (MSAP) policy configured in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MsapTlsPlcyEntry

msapTlsPlcyEntry 1.3.6.1.4.1.6527.3.1.2.4.3.45.1
Each entry represents the VPLS-related configuration for a managed SAP (MSAP) policy. The values for each entry will be used to populate the following VPLS-related tables when the MSAP policy is applied to a MSAP: TIMETRA-SAP-MIB::sapTlsInfoTable TIMETRA-SAP-MIB::sapTlsDhcpInfoTable ALCATEL-IGMP-SNOOPING-MIB::tlsIgmpSnpgConfigTable
Status: current Access: not-accessible
OBJECT-TYPE    
  MsapTlsPlcyEntry  

msapTlsPlcyLastChanged 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.1
The value of msapTlsPlcyLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

msapTlsPlcySplitHorizonGrp 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.2
The value of msapTlsPlcySplitHorizonGrp specifies the name of the split-horizon group for the MSAP. If the name specified does not correspond to a tlsShgInfoEntry for the VPLS service, the creation of the MSAP will fail. Additionally, if msapTlsPlcySplitHorizonGrp is set to a new value, the sapSplitHorizonGrp object for any existing MSAPs created by this policy will not be updated.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

msapTlsPlcyArpReplyAgent 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.3
The value of msapTlsPlcyArpReplyAgent specifies the status of the special ARP response mechanism in the system for ARP requests destined to static or dynamic hosts associated with the MSAP. 'disabled' - the ARP reply function is not operational 'enabled' - the ARP reply function is enabled without subscriber identification. 'enabledWithSubscrIdent' - the ARP reply function is enabled with subscriber identification.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2), enabledWithSubscrIdent(3)  

msapTlsPlcySubMgmtMacDaHashing 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.4
The value of msapTlsPlcySubMgmtMacDaHashing specifies whether subscriber traffic egressing a LAG MSAP has its egress LAG link selected by a function of the MAC destination address instead of subscriber id.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

msapTlsPlcyDhcpLeasePopulate 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.5
The value of msapTlsPlcyDhcpLeasePopulate specifies the maximum number of DHCP lease states allowed on the MSAP.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..8000  

msapTlsPlcyDhcpPrxyAdminState 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.6
The value of msapTlsPlcyDhcpPrxyAdminState specifies the desired administrative state of the proxy server on the interface.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxEnabledDisabled  

msapTlsPlcyDhcpPrxyServAddrType 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.7
The value of msapTlsPlcyDhcpPrxyServAddrType specifies the address type of msapTlsPlcyDhcpPrxyServAddr.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

msapTlsPlcyDhcpPrxyServAddr 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.8
The value of msapTlsPlcyDhcpPrxyServAddr specifies the IP address of the which will be used as the source address of the emulated DHCP server in the context of the VPLS MSAP. This address is mandatory for the proxy server capability and it should be in the context of the subnet represented by the VPLS.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4|16|20)  

msapTlsPlcyDhcpPrxyLeaseTime 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.9
The value of msapTlsPlcyDhcpPrxyLeaseTime specifies, in seconds, how long a DHCP client is allowed to use the offered IP address. A value of 0 means the lease time provided by a RADIUS or an upstream DHCP server will not be overridden. A value of 7 days (315446399 seconds) is used when RADIUS does not provide a lease time.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 300..315446399  

msapTlsPlcyDhcpPrxyLTRadOverride 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.10
The value of msapTlsPlcyDhcpPrxyLTRadOverride specifies whether or not the lease time provided by the RADIUS server is presented to the DHCP client. By default the proxy-server will always make use of msapTlsPlcyDhcpPrxyLeaseTime, regardless of what lease time information is provided from the RADIUS server. When msapTlsPlcyDhcpPrxyLTRadOverride is set to 'true', the proxy-server will use the lease time information provided by the RADIUS server, regardless of the configured lease time.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

msapTlsPlcyDhcpInfoAction 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.11
The value of msapTlsPlcyDhcpInfoAction specifies the DHCP option reforwarding policy: 'replace' - replace existing information with configured information 'drop' - discard messages with existing relay information if the option-82 information is also present 'keep' - retain the existing relay information
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER replace(1), drop(2), keep(3)  

msapTlsPlcyDhcpCircuitId 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.12
The value of msapTlsPlcyDhcpCircuitId specifies whether or not the circuit-id suboption is present, and if it is present what information goes in it: none - the circuit-id suboption will not be part of the information option (Option 82). asciiTuple - the ASCII-encoded concatenated tuple consisting of the - access-node-identifier - service-id - interface-name is used. vlanAsciiTuple - the format will include VLAN-id and dot1p bits in addition to what is included in ascii-tuple already. The format is supported on dot1q and qinq encapsulated ports only. Thus, when the option 82 bits are stripped, dot1p bits will be copied to the Ethernet header of an outgoing packet.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), asciiTuple(1), vlanAsciiTuple(2)  

msapTlsPlcyDhcpRemoteId 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.13
The value of msapTlsPlcyDhcpRemoteId specifies what information goes into the remote-id suboption in the DHCP Relay packet. If the value of this object is set to 'none', the remote-id suboption will not be part of the information option (Option 82). If the value of this object is set to 'mac', the MAC address of the remote end is encoded in the suboption. If the value of this object is set to 'remote-id', msapTlsPlcyDhcpRemoteIdString will represent the remote-id. By default, the remote-id value is none.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(1), mac(2), remote-id(3)  

msapTlsPlcyDhcpRemoteIdString 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.14
The value of msapTlsPlcyDhcpRemoteIdString specifies the remote-id. The value of this object is ignored if msapTlsPlcyDhcpRemoteId does not have the value of 'remote-id'.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

msapTlsPlcyDhcpVendorInclOpts 0.1.3.6.1.4.1.6527.3.1.2.4.3.45.1.15
The value of msapTlsPlcyDhcpVendorInclOpts specifies what is encoded in the Alcatel-Lucent vendor specific sub-option of option 82. The value of this object is only used when msapTlsPlcyDhcpInfoAction is 'replace'.
Status: current Access: read-create
OBJECT-TYPE    
  BITS systemId(0), clientMac(1), serviceId(2), sapId(3)  

msapTlsPlcyDhcpVendorOptStr 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.16
The value of msapTlsPlcyDhcpVendorOptStr specifies the string that goes into the Alcatel-Lucent vendor specific sub-option of option 82. This string is only used when msapTlsPlcyDhcpInfoAction is set to 'replace'.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

msapTlsPlcyEgressMcastGroup 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.17
The value of msapTlsPlcyEgressMcastGroup specifies the Egress Multicast Group for the MSAP.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

msapTlsPlcyIgmpSnpgImportPlcy 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.18
The value of msapTlsPlcyIgmpSnpgImportPlcy specifies the policy statement that is be applied to all incoming IGMP messages on the MSAP.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

msapTlsPlcyIgmpSnpgFastLeave 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.19
The value of msapTlsPlcyIgmpSnpgFastLeave specifies whether fast leave is allowed on this MSAP. If set to 'enabled', the system prunes the port on which an IGMP 'leave' message has been received without waiting for the Group Specific Query to timeout.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxEnabledDisabled  

msapTlsPlcyIgmpSnpgSendQueries 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.20
The value of msapTlsPlcyIgmpSnpgSendQueries specifies whether the system generates General Queries by itself on the MSAP.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxEnabledDisabled  

msapTlsPlcyIgmpSnpgGenQueryIntv 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.21
The value of msapTlsPlcyIgmpSnpgGenQueryIntv specifies the interval (in seconds) between two consecutive general queries sent by the system on the MSAP. The value of this object is only meaningful when the value of msapTlsPlcyIgmpSnpgSendQueries is 'enabled'.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 2..1024  

msapTlsPlcyIgmpSnpgQueryRespIntv 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.22
The value of msapTlsPlcyIgmpSnpgQueryRespIntv specifies the maximum response time (in seconds) advertised in IGMPv2/v3 queries. The value of this object is only meaningful when the value of msapTlsPlcyIgmpSnpgSendQueries is 'enabled'.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..1023  

msapTlsPlcyIgmpSnpgRobustCount 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.23
The value of msapTlsPlcyIgmpSnpgRobustCount specifies the robustness variable on the MSAP. This object allows tuning for the expected packet loss on the MSAP. If a MSAP is expected to be lossy, the Robustness Variable may be increased. IGMP snooping is robust to (Robustness Variable-1) packet losses. The value of this object is only meaningful when the value of msapTlsPlcyIgmpSnpgSendQueries is 'enabled'.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 2..7  

msapTlsPlcyIgmpSnpgLastMembIntvl 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.24
The value of msapTlsPlcyIgmpSnpgLastMembIntvl specifies the Max Response Time (in tenths of a second) used in Group-Specific and Group-Source-Specific Queries sent in response to 'leave' messages. This is also the amount of time between Group-Specific Query messages. This value may be tuned to modify the leave latency of the network. A reduced value results in reduced time to detect the loss of the last member of a group.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..50  

msapTlsPlcyIgmpSnpgMaxNbrGrps 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.25
The value of msapTlsPlcyIgmpSnpgMaxNbrGrps specifies how many group addresses are allowed for the MSAP. The value 0 means that no limit is imposed.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..1000  

msapTlsPlcyIgmpSnpgMvrFromVplsId 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.26
The value of msapTlsPlcyIgmpSnpgMvrFromVplsId specifies from which VPLS the multicast streams corresponding to the groups learned via the MSAP are copied. Groups which cannot be joined to the corresponding MVR VPLS (because MVR is not up or the configured MVR policy rejects the group) copy the multicast streams from the local VPLS if IGMP snooping is up (i.e. tlsIgmpSnpgCfgAdminState is 'enabled').
Status: current Access: read-create
OBJECT-TYPE    
  TmnxServId  

msapTlsPlcyIgmpSnpgVersion 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.27
The value of msapTlsPlcyIgmpSnpgVersion specifies the version of IGMP running on the MSAP.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxIgmpVersion  

msapTlsPlcyIgmpSnpgMcacPlcyName 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.28
The value of msapTlsPlcyIgmpSnpgMcacPlcyName specifies the name of the multicast CAC (Connection Admission Control) policy.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

msapTlsPlcyIgmpSnpgMcacUncnstBW 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.29
The value of msapTlsPlcyIgmpSnpgMcacUncnstBW specifies the bandwidth assigned for interface's multicast CAC policy traffic in kilo-bits per second(kbps). If the default value of '-1' is set, there is no constraint on bandwidth allocated at the interface. If the value of msapTlsPlcyIgmpSnpgMcacUncnstBW is set to '0' and if a multicast CAC policy is assigned on the interface, then no group (channel) from that policy is allowed on that interface.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1 | 0..2147483647  

msapTlsPlcyIgmpSnpgMcacPrRsvMnBW 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.30
The value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW specifies the bandwidth pre-reserved for all the mandatory channels on a given interface in kilo-bits per second(kbps). If the value of msapTlsPlcyIgmpSnpgMcacUncnstBW is '0', no mandatory channels are allowed. If the value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW is '-1', then all mandatory and optional channels are allowed. If the value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW is equal to the value of msapTlsPlcyIgmpSnpgMcacUncnstBW, then all the unconstrained bandwidth on a given interface is allocated to mandatory channels configured through multicast CAC policy on that interface and no optional groups (channels) are allowed. The value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW should always be less than or equal to that of msapTlsPlcyIgmpSnpgMcacUncnstBW. An attempt to set the value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW greater than that of msapTlsPlcyIgmpSnpgMcacUncnstBW will result in 'inconsistentValue' error.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1 | 0..2147483647  

msapIgmpSnpgMcacLevelTable 1.3.6.1.4.1.6527.3.1.2.4.3.46
The msapIgmpSnpgMcacLevelTable has an entry for each multicast CAC policy constraint level configured for a Managed SAP policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MSapIgmpSnpgMcacLevelEntry

msapIgmpSnpgMcacLevelEntry 1.3.6.1.4.1.6527.3.1.2.4.3.46.1
Each row entry represents a multicast CAC policy bundle level constraints for a particular Managed SAP policy. Entries are created and deleted by the user.
Status: current Access: not-accessible
OBJECT-TYPE    
  MSapIgmpSnpgMcacLevelEntry  

msapIgmpSnpgMcacLevelId 1.3.6.1.4.1.6527.3.1.2.4.3.46.1.1
The value of msapIgmpSnpgMcacLevelId indicates the level id of the multicast CAC policy bundle constraint. The value of level 1 has the highest priority and level 8 the lowest.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..8  

msapIgmpSnpgMcacLevelRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.46.1.2
The value of msapIgmpSnpgMcacLevelRowStatus is used for creation and deletion of level constraint in a CAC for a Managed SAP policy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

msapIgmpSnpgMcacLevelLastChanged 1.3.6.1.4.1.6527.3.1.2.4.3.46.1.3
The value of msapIgmpSnpgMcacLevelLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

msapIgmpSnpgMcacLevelBW 1.3.6.1.4.1.6527.3.1.2.4.3.46.1.4
The value of msapIgmpSnpgMcacLevelBW specifies the bandwidth in kilo-bits per second (kbps) for the level.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

msapIgmpSnpgMcacLagTable 1.3.6.1.4.1.6527.3.1.2.4.3.47
The msapIgmpSnpgMcacLagTable has an entry for each lag port configured for a multicast CAC policy bundle configured for a Managed SAP policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MSapIgmpSnpgMcacLagEntry

msapIgmpSnpgMcacLagEntry 1.3.6.1.4.1.6527.3.1.2.4.3.47.1
Each row entry represents a particular multicast CAC lag port constraints for a Managed SAP policy.. Entries are created and deleted by the user.
Status: current Access: not-accessible
OBJECT-TYPE    
  MSapIgmpSnpgMcacLagEntry  

msapIgmpSnpgMcacLagPortsDown 1.3.6.1.4.1.6527.3.1.2.4.3.47.1.1
The value of msapIgmpSnpgMcacLagPortsDown indicates the configured number of ports in a lag group that are down. If the number of ports available in the lag is reduced by the number of ports configured for msapIgmpSnpgMcacLagPortsDown object then bandwidth allowed for bundle will be updated to the value of msapIgmpSnpgMcacLevelBW indexed by msapIgmpSnpgMcacLagLevel value.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..8  

msapIgmpSnpgMcacLagRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.47.1.2
The value of msapIgmpSnpgMcacLagRowStatus is used for creation and deletion of lag constraint in a CAC policy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

msapIgmpSnpgMcacLagLastChanged 1.3.6.1.4.1.6527.3.1.2.4.3.47.1.3
The value of msapIgmpSnpgMcacLagLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

msapIgmpSnpgMcacLagLevel 1.3.6.1.4.1.6527.3.1.2.4.3.47.1.4
The value of msapIgmpSnpgMcacLagLevel specifies the level id to use when the value of msapIgmpSnpgMcacLagPortsDown matches the actual number of ports down in a lag. Using the value of msapIgmpSnpgMcacLagLevel as an index, the operational MSAP unconstrained bandwidth will be set to msapIgmpSnpgMcacLevelBW. By default, for all lag constraints the link level will be set to 1 at row creation.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..8  

msapInfoTable 1.3.6.1.4.1.6527.3.1.2.4.3.48
A table that contains Managed SAP information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MSapInfoEntry

msapInfoEntry 1.3.6.1.4.1.6527.3.1.2.4.3.48.1
Information about a specific Managed SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  MSapInfoEntry  

msapInfoCreationSapPortEncapVal 1.3.6.1.4.1.6527.3.1.2.4.3.48.1.1
The value of msapInfoCreationSapPortEncapVal indicates the port encapsulation value of the SAP with a sapSubType value of 'capture' that created this MSAP.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxEncapVal  

msapInfoCreationPlcyName 1.3.6.1.4.1.6527.3.1.2.4.3.48.1.2
The value of msapInfoCreationPlcyName indicates the value of the msapPlcyName object for MSAP policy used to create this MSAP.
Status: current Access: read-only
OBJECT-TYPE    
  TNamedItem  

msapInfoReEvalPolicy 1.3.6.1.4.1.6527.3.1.2.4.3.48.1.3
The value of msapInfoReEvalPolicy specifies whether to re-apply the Managed SAP policy associated with this MSAP. When a SET of this object is done with a value of 'doAction', the system will attempt to re-apply the MSAP policy indicated by msapInfoCreationPlcyName. If this action is successful, 'noError' will be returned. If this action is unsuccessful, an 'inconsistentValue' error will be returned. Attempting to SET this object with a value of 'notApplicable' will have no effect and will return 'noError'. SNMP GET and GETNEXT requests on this object will return 'notApplicable'.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxActionType  

msapInfoLastChanged 1.3.6.1.4.1.6527.3.1.2.4.3.48.1.4
The value of msapInfoLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

msapCaptureSapStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.49
A table that contains statistics for SAPs with a sapSubType value of 'capture'.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MSapCaptureSapStatsEntry

msapCaptureSapStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.49.1
Statistics for a specific 'capture' SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  MSapCaptureSapStatsEntry  

msapCaptureSapStatsTriggerType 1.3.6.1.4.1.6527.3.1.2.4.3.49.1.1
The value of msapCaptureSapStatsTriggerType indicates the type of trigger packets this entry is for.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER dhcp(1), pppoe(2)  

msapCaptureSapStatsPktsRecvd 1.3.6.1.4.1.6527.3.1.2.4.3.49.1.2
The value of msapCaptureSapStatsPktsRecvd indicates the number of packets received on this 'capture' SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

msapCaptureSapStatsPktsRedirect 1.3.6.1.4.1.6527.3.1.2.4.3.49.1.3
The value of msapCaptureSapStatsPktsRedirect indicates the number of packets redirected on this 'capture' SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

msapCaptureSapStatsPktsDropped 1.3.6.1.4.1.6527.3.1.2.4.3.49.1.4
The value of msapCaptureSapStatsPktsDropped indicates the number of packets dropped on this 'capture' SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsMrpTable 1.3.6.1.4.1.6527.3.1.2.4.3.50
The sapTlsMrpTable augments sapTlsInfoTable with attributes of the Multiple Registration Protocol (MRP) feature for the TLS SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapTlsMrpEntry

sapTlsMrpEntry 1.3.6.1.4.1.6527.3.1.2.4.3.50.1
MRP specific information about a SAP in a TLS.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapTlsMrpEntry  

sapTlsMrpRxPdus 1.3.6.1.4.1.6527.3.1.2.4.3.50.1.1
The value of sapTlsMrpRxPdus indicates the number of MRP packets received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsMrpDroppedPdus 1.3.6.1.4.1.6527.3.1.2.4.3.50.1.2
The value of sapTlsMrpDroppedPdus indicates the number of dropped MRP packets on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsMrpTxPdus 1.3.6.1.4.1.6527.3.1.2.4.3.50.1.3
The value of sapTlsMrpTxPdus indicates the number of MRP packets transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsMrpRxNewEvent 1.3.6.1.4.1.6527.3.1.2.4.3.50.1.4
The value of sapTlsMrpRxNewEvent indicates the number of 'New' MRP events received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsMrpRxJoinInEvent 1.3.6.1.4.1.6527.3.1.2.4.3.50.1.5
The value of sapTlsMrpRxJoinInEvent indicates the number of 'Join-In' MRP events received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsMrpRxInEvent 1.3.6.1.4.1.6527.3.1.2.4.3.50.1.6
The value of sapTlsMrpRxInEvent indicates the number of 'In' MRP events received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsMrpRxJoinEmptyEvent 1.3.6.1.4.1.6527.3.1.2.4.3.50.1.7
The value of sapTlsMrpRxJoinEmptyEvent indicates the number of 'Join Empty' MRP events received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsMrpRxEmptyEvent 1.3.6.1.4.1.6527.3.1.2.4.3.50.1.8
The value of sapTlsMrpRxEmptyEvent indicates the number of 'Empty' MRP events received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsMrpRxLeaveEvent 1.3.6.1.4.1.6527.3.1.2.4.3.50.1.9
The value of sapTlsMrpRxLeaveEvent indicates the number of 'Leave' MRP events received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsMrpTxNewEvent 1.3.6.1.4.1.6527.3.1.2.4.3.50.1.10
The value of sapTlsMrpTxNewEvent indicates the number of 'New' MRP events transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsMrpTxJoinInEvent 1.3.6.1.4.1.6527.3.1.2.4.3.50.1.11
The value of sapTlsMrpTxJoinInEvent indicates the number of 'Join-In' MRP events transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsMrpTxInEvent 1.3.6.1.4.1.6527.3.1.2.4.3.50.1.12
The value of sapTlsMrpTxInEvent indicates the number of 'In' MRP events transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsMrpTxJoinEmptyEvent 1.3.6.1.4.1.6527.3.1.2.4.3.50.1.13
The value of sapTlsMrpTxJoinEmptyEvent indicates the number of 'Join Empty' MRP events transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsMrpTxEmptyEvent 1.3.6.1.4.1.6527.3.1.2.4.3.50.1.14
The value of sapTlsMrpTxEmptyEvent indicates the number of 'Empty' MRP events transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsMrpTxLeaveEvent 1.3.6.1.4.1.6527.3.1.2.4.3.50.1.15
The value of sapTlsMrpTxLeaveEvent indicates the number of 'Leave' MRP events transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsMmrpTable 1.3.6.1.4.1.6527.3.1.2.4.3.51
This table contains an entry for each MAC address managed by Multiple MAC Registration Protocol (MMRP) on the SAP for the TLS. Entries are dynamically created and destroyed by the system as the MAC Addresses are registered or declared in MMRP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapTlsMmrpEntry

sapTlsMmrpEntry 1.3.6.1.4.1.6527.3.1.2.4.3.51.1
MMRP specific information about a MAC address managed by MMRP on a SAP in a TLS.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapTlsMmrpEntry  

sapTlsMmrpMacAddr 1.3.6.1.4.1.6527.3.1.2.4.3.51.1.1
The value of sapTlsMmrpMacAddr indicates an ethernet MAC address which is being managed by MMRP on this SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

sapTlsMmrpDeclared 1.3.6.1.4.1.6527.3.1.2.4.3.51.1.2
The value of sapTlsMmrpDeclared indicates whether the MRP applicant on this SAP is declaring this MAC address on behalf of MMRP.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sapTlsMmrpRegistered 1.3.6.1.4.1.6527.3.1.2.4.3.51.1.3
The value of sapTlsMmrpRegistered indicates whether the MRP registrant on this SAP has notified MMRP of a registration of this MAC address.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

msapPlcyTblLastChgd 1.3.6.1.4.1.6527.3.1.2.4.3.59
The value of msapPlcyTblLastChgd indicates the sysUpTime at the time of the last modification of msapPlcyTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

msapTlsPlcyTblLastChgd 1.3.6.1.4.1.6527.3.1.2.4.3.60
The value of msapTlsPlcyTblLastChgd indicates the sysUpTime at the time of the last modification of msapTlsPlcyTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

msapIgmpSnpgMcacLvlTblLastChgd 1.3.6.1.4.1.6527.3.1.2.4.3.61
The value of msapIgmpSnpgMcacLvlTblLastChgd indicates the sysUpTime at the time of the last modification of msapIgmpSnpgMcacLevelTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

msapIgmpSnpgMcacLagTblLastChgd 1.3.6.1.4.1.6527.3.1.2.4.3.62
The value of msapIgmpSnpgMcacLagTblLastChgd indicates the sysUpTime at the time of the last modification of msapIgmpSnpgMcacLagTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

msapInfoTblLastChgd 1.3.6.1.4.1.6527.3.1.2.4.3.63
The value of msapInfoTblLastChgd indicates the sysUpTime at the time of the last modification of msapInfoTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapNotifyPortId 1.3.6.1.4.1.6527.3.1.2.4.3.100.1
The ID of the access port where a SAP is defined. This object is used by the sapPortStateChangeProcessed notification to indicate the port ID that changed state and that resulted in having the associated sapStatusChanged events suppressed for all SAPs on that port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TmnxPortID  

msapStatus 1.3.6.1.4.1.6527.3.1.2.4.3.100.2
The status of the Managed SAP which is used by the msapStateChanged notification to indicate what state the Managed SAP has entered: 'created', 'modified', or 'deleted'.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  ConfigStatus  

svcManagedSapCreationError 1.3.6.1.4.1.6527.3.1.2.4.3.100.3
The value of the object svcManagedSapCreationError indicates the reason why the system was unable to create the managed SAP.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

sapCreated 1.3.6.1.4.1.6527.3.1.3.4.3.0.1
This trap is sent when a new row is created in the sapBaseInfoTable.
Status: obsolete Access: accessible-for-notify
NOTIFICATION-TYPE    

sapDeleted 1.3.6.1.4.1.6527.3.1.3.4.3.0.2
This trap is sent when an existing row is deleted from the sapBaseInfoTable.
Status: obsolete Access: accessible-for-notify
NOTIFICATION-TYPE    

sapStatusChanged 1.3.6.1.4.1.6527.3.1.3.4.3.0.3
The sapStatusChanged notification is generated when there is a change in the administrative or operating status of an SAP. Notice that this trap is not generated whenever the SAP operating status change is caused by an operating status change on the associated access port.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

sapTlsMacAddrLimitAlarmRaised 1.3.6.1.4.1.6527.3.1.3.4.3.0.4
The trap sapTlsMacAddrLimitAlarmRaised is sent whenever the number of MAC addresses stored in the FDB for this SAP increases to reach the watermark specified by the object svcTlsFdbTableFullHighWatermark.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

sapTlsMacAddrLimitAlarmCleared 1.3.6.1.4.1.6527.3.1.3.4.3.0.5
The trap sapTlsMacAddrLimitAlarmCleared is sent whenever the number of MAC addresses stored in the FDB for this SAP drops to the watermark specified by the object svcTlsFdbTableFullLowWatermark.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

sapTlsDHCPLseStEntriesExceeded 1.3.6.1.4.1.6527.3.1.3.4.3.0.6
The sapTlsDHCPLseStEntriesExceeded notification is generated when the number of DHCP lease states entries on a given SAP reaches a user configurable upper limit given by sapTlsDhcpLeasePopulate.
Status: obsolete Access: accessible-for-notify
NOTIFICATION-TYPE    

sapTlsDHCPLeaseStateOverride 1.3.6.1.4.1.6527.3.1.3.4.3.0.7
The sapTlsDHCPLeaseStateOverride notification is generated when an existing DHCP lease state is overridden by a new lease state which has the same IP address but a different MAC address.
Status: obsolete Access: accessible-for-notify
NOTIFICATION-TYPE    

sapTlsDHCPSuspiciousPcktRcvd 1.3.6.1.4.1.6527.3.1.3.4.3.0.8
The sapTlsDHCPSuspiciousPcktRcvd notification is generated when a DHCP packet is received with suspicious content.
Status: obsolete Access: accessible-for-notify
NOTIFICATION-TYPE    

sapDHCPLeaseEntriesExceeded 1.3.6.1.4.1.6527.3.1.3.4.3.0.9
The sapDHCPLeaseEntriesExceeded notification is generated when the number of DHCP lease state entries on a given SAP reaches a user configurable upper limit. This limit is given by sapTlsDhcpLeasePopulate for a TLS service and by ALCATEL-IND1-TIMETRA-VRTR-MIB::vRtrIfDHCPLeasePopulate for an IES or VPRN service.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

sapDHCPLseStateOverride 1.3.6.1.4.1.6527.3.1.3.4.3.0.10
The sapDHCPLseStateOverride notification is generated when an existing DHCP lease state is overridden by a new lease state which has the same IP address but a different MAC address.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

sapDHCPSuspiciousPcktRcvd 1.3.6.1.4.1.6527.3.1.3.4.3.0.11
The sapDHCPSuspiciousPcktRcvd notification is generated when a DHCP packet is received with suspicious content.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

sapDHCPLseStatePopulateErr 1.3.6.1.4.1.6527.3.1.3.4.3.0.12
The sapDHCPLseStatePopulateErr notification indicates that the system was unable to update the DHCP Lease State table with the information contained in the DHCP ACK message. The DHCP ACK message has been discarded.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hostConnectivityLost 1.3.6.1.4.1.6527.3.1.3.4.3.0.13
The hostConnectivityLost notification indicates that the system lost the connectivity with the indicated host.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hostConnectivityRestored 1.3.6.1.4.1.6527.3.1.3.4.3.0.14
The hostConnectivityRestored notification indicates that the system has restored the connectivity with the indicated host.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

sapReceivedProtSrcMac 1.3.6.1.4.1.6527.3.1.3.4.3.0.15
The sapReceivedProtSrcMac notification is generated when a protected source MAC is received on a TLS SAP with sapTlsRestProtSrcMac 'true' and sapTlsRestProtSrcMacAction 'alarm-only', or if the TLS SAP belongs to an SHG with tlsShgRestProtSrcMac 'true' and tlsShgRestProtSrcMacAction 'alarm-only'.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

sapStaticHostDynMacConflict 1.3.6.1.4.1.6527.3.1.3.4.3.0.16
The sapStaticHostDynMacConflict notification indicates that the system is trying to learn a conflicting IP-only static host dynamic MAC address (sapStaticHostDynMacAddress).
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

sapTlsMacMoveExceeded 1.3.6.1.4.1.6527.3.1.3.4.3.0.17
The sapTlsMacMoveExceeded notification is generated when the SAP exceeds the TLS svcTlsMacMoveMaxRate.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

sapDHCPProxyServerError 1.3.6.1.4.1.6527.3.1.3.4.3.0.18
The sapDHCPProxyServerError notification indicates that the system was unable to proxy DHCP requests.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

sapDHCPCoAError 1.3.6.1.4.1.6527.3.1.3.4.3.0.19
The sapDHCPCoAError notification indicates that the system was unable to process a Change of Authorization (CoA) request from a Radius server.
Status: obsolete Access: accessible-for-notify
NOTIFICATION-TYPE    

sapDHCPSubAuthError 1.3.6.1.4.1.6527.3.1.3.4.3.0.20
The sapDHCPSubAuthError notification indicates that the system encountered a problem while trying to authenticate a subscriber.
Status: obsolete Access: accessible-for-notify
NOTIFICATION-TYPE    

sapPortStateChangeProcessed 1.3.6.1.4.1.6527.3.1.3.4.3.0.21
The sapPortStateChangeProcessed notification indicates that the agent has finished processing an access port state change event, and that the operating status of all the affected SAP's has been updated accordingly. The value of the sapNotifyPortId object indicates the ID of the port that experienced the state change.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

sapDHCPLseStateMobilityError 1.3.6.1.4.1.6527.3.1.3.4.3.0.22
The sapDHCPLseStateMobilityError notification indicates that the system was unable to perform a mobility check for this lease state.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

sapCemPacketDefectAlarm 1.3.6.1.4.1.6527.3.1.3.4.3.0.23
Generated when a CEM SAP alarm condition is detected. It is generated only when the packet error indicated by 'sapCemReportAlarmStatus' persists over a 3 second window.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

sapCemPacketDefectAlarmClear 1.3.6.1.4.1.6527.3.1.3.4.3.0.24
Generated when a CEM SAP alarm condition is cleared. It is generated only when the packet error indicated by 'sapCemReportAlarmStatus' no longer persists over a 10 second window.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

msapStateChanged 1.3.6.1.4.1.6527.3.1.3.4.3.0.25
The msapStateChanged notification is generated when a Managed SAP is 'created', 'modified', or 'deleted', with the value of msapStatus indicated which state it has entered.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

msapCreationFailure 1.3.6.1.4.1.6527.3.1.3.4.3.0.26
The trap msapCreationFailure is sent whenever the system fails to create a managed SAP. The svcId, svcVpnId, sapPortId and sapEncapValue are those of the capturing SAP.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

topologyChangeSapMajorState 1.3.6.1.4.1.6527.3.1.3.4.5.0.1
The topologyChangeSapMajorState notification is generated when a SAP has transitioned its state from learning to forwarding or from forwarding to blocking or broken. The spanning tree topology has been modified and it may denote loss of customer access or redundancy. Check the new topology against the provisioned topology to determine the severity of connectivity loss.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

newRootSap 1.3.6.1.4.1.6527.3.1.3.4.5.0.2
The newRootSap notification is generated when the previous root bridge has been aged out and a new root bridge has been elected. A new root bridge creates a new spanning tree topology and it may denote loss of customer access or redundancy. Check the new topology against the provisioned topology to determine the severity of connectivity loss.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

topologyChangeSapState 1.3.6.1.4.1.6527.3.1.3.4.5.0.5
The topologyChangeSapState notification is generated when a SAP has transitioned state to blocking or broken from a state other than forwarding. This event complements what is not covered by topologyChangeSapMajorState. The spanning tree topology has been modified and it may denote loss of customer access or redundancy. Check the new topology against the provisioned topology to determine severity of connectivity loss.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

receivedTCN 1.3.6.1.4.1.6527.3.1.3.4.5.0.6
The receivedTCN notification is generated when a SAP has received TCN from another bridge. This bridge will either have its configured BPDU with the topology change flag set if it is a root bridge, or it will pass TCN to its root bridge. Eventually the address aging timer for the forwarding database will be made shorter for a short period of time. No recovery is needed.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

higherPriorityBridge 1.3.6.1.4.1.6527.3.1.3.4.5.0.9
The higherPriorityBridge notification is generated when a customer's device has been configured with a bridge priority equal to zero. The SAP that the customer's device is connected through will be blocked. Remove the customer's device or reconfigure the customer's bridge priority with a value greater than zero.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

bridgedTLS 1.3.6.1.4.1.6527.3.1.3.4.5.0.10
The bridgedTLS notification is generated when a configuration BPDU has been received that identifies that another TLS with a different VPNID is attempting to bridge with this TLS. At least one ESR participating within one of the TLS that is locally connected must have an active VCP for this to be seen. The SAP that the configuration BPDU is received on will be blocked to prevent the TLS to TLS bridging. Reconfigure the bridged TLS into a single TLS or remove the connectivity.
Status: obsolete Access: accessible-for-notify
NOTIFICATION-TYPE    

sapEncapPVST 1.3.6.1.4.1.6527.3.1.3.4.5.0.11
The sapEncapPVST notification is generated when the SAP receives a BPDU that is PVST encapsulated, after having received BPDUs that were 802.d encapsulated. The SAP BPDUs will also be PVST encapsulated. No recovery is needed.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

sapEncapDot1d 1.3.6.1.4.1.6527.3.1.3.4.5.0.12
The sapEncapDot1d notification is generated when the SAP receives a BPDU that is 802.1d encapsulated after having received BPDUs that were PVST encapsulated. The SAP BPDUs will also be 802.1d encapsulated. No recovery is needed.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

sapReceiveOwnBpdu 1.3.6.1.4.1.6527.3.1.3.4.5.0.13
The sapReceiveOwnBpdu notification is generated when the SAP STP received it's own BPDU.
Status: obsolete Access: accessible-for-notify
NOTIFICATION-TYPE    

sapActiveProtocolChange 1.3.6.1.4.1.6527.3.1.3.4.5.0.30
The sapActiveProtocolChange notification is generated when the spanning tree protocol on this SAP changes from rstp to stp or vise versa. No recovery is needed.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxStpRootGuardViolation 1.3.6.1.4.1.6527.3.1.3.4.5.0.35
The tmnxStpRootGuardViolation notification is generated when a SAP which has root-guard configured is trying to become root (has a better STP priority vector). The SAP will become alternate and traffic will be blocked.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxSapStpExcepCondStateChng 1.3.6.1.4.1.6527.3.1.3.4.5.0.37
The tmnxSapStpExcepCondStateChng notification is generated when the value of the object sapTlsStpException has changed, i.e. when the exception condition changes on the indicated SAP.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxSapCompliances 1.3.6.1.4.1.6527.3.1.1.4.3.1
OBJECT IDENTIFIER    

tmnxSapGroups 1.3.6.1.4.1.6527.3.1.1.4.3.2
OBJECT IDENTIFIER    

tmnxSap7450V6v0Compliance 1.3.6.1.4.1.6527.3.1.1.4.3.1.100
The compliance statement for management of services SAPs on Alcatel 7450 ESS series systems.
Status: current Access: accessible-for-notify
MODULE-COMPLIANCE    

tmnxSap7750V6v0Compliance 1.3.6.1.4.1.6527.3.1.1.4.3.1.101
The compliance statement for management of services SAPs on Alcatel 7750 SR series systems.
Status: current Access: accessible-for-notify
MODULE-COMPLIANCE    

tmnxSap7710V6v0Compliance 1.3.6.1.4.1.6527.3.1.1.4.3.1.102
The compliance statement for management of services SAPs on Alcatel 7710 SR series systems.
Status: current Access: accessible-for-notify
MODULE-COMPLIANCE    

tmnxSapV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.100
The group of objects supporting management of Sap general capabilities on Alcatel 7x50 SR series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSapTlsV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.101
The group of objects supporting management of Sap TLS capabilities on Alcatel 7x50 SR series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSapAtmV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.102
The group of objects supporting management of Sap ATM capabilities on Alcatel 7x50 SR series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSapBaseV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.103
The group of objects supporting management of Sap Base capabilities on Alcatel 7x50 SR series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSapQosV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.104
The group of objects supporting management of Sap Ingress/Egress QoS capabilities on Alcatel 7x50 SR series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSapStaticHostV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.105
The group of objects supporting management of Sap static host capabilities on Alcatel 7x50 SR series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSapDhcpV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.106
The group of objects supporting management of Sap TLS DHCP capabilities on Alcatel 7x50 SR series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSapPortIdV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.107
The group of objects supporting management of Sap Port ID capabilities on Alcatel 7x50 SR series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSapSubMgmtV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.108
The group of objects supporting management of Sap Sub-management capabilities on Alcatel 7x50 SR series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSapMstiV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.109
The group of objects supporting management of Sap TLS MSTI capabilities on Alcatel 7x50 SR series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSapIppipeV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.110
The group of objects supporting management of Sap I-Pipe capabilities on Alcatel 7x50 SR series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSapPolicyV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.111
The group of objects supporting management of Sap ingress/egress capabilities on Alcatel 7x50 SR series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSapCemV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.112
The group of objects supporting management of Sap Cem capabilities on Alcatel 7x50 SR series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSapL2ptV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.113
The group of objects supporting management of Sap TLS L2pt capabilities on Alcatel 7x50 SR series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSapMsapV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.114
The group of objects supporting management of managed SAP capabilities on Alcatel 7x50 SR series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSapMrpV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.115
The group of objects supporting management of Sap MRP capabilities on Alcatel 7x50 SR series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxTlsMsapPppoeV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.117
The group of objects supporting PPPOE on Managed SAPs feature on the Alcatel 7x50 SR series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSapIpV6FilterV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.118
The group of objects supporting management of Sap Ingress Policy capabilities on Alcatel 7x50 SR series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSapBsxV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.119
The group of objects supporting management of BSX (Application Assurance) capabilities on Alcatel 7x50 SR series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSapNotificationObjV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.200
The group of objects supporting management of notifications on Alcatel 7x50 SR series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSapObsoletedV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.300
The group of obsolete objects for the services feature on Alcatel 7x50 SR series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxSapNotifyGroup 1.3.6.1.4.1.6527.3.1.1.4.3.2.400
The group of obsolete notifications for the Sap feature on Alcatel 7x50 SR series systems.
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

tmnxSapCemNotificationV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.401
The group of notifications supporting the CEM Sap feature on Alcatel 7710 SR series systems.
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

tmnxSapObsoletedNotifyGroup 1.3.6.1.4.1.6527.3.1.1.4.3.2.402
The group of obsolete notifications for the Sap feature on Alcatel 7x50 SR series systems.
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP