ALCATEL-IND1-RDP-MIB

File: ALCATEL-IND1-RDP-MIB.mib (8716 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMP-FRAMEWORK-MIB
SNMPv2-CONF ALCATEL-IND1-BASE

Imported symbols

MODULE-IDENTITY OBJECT-TYPE IpAddress
Integer32 Unsigned32 RowStatus
SnmpAdminString MODULE-COMPLIANCE OBJECT-GROUP
routingIND1RDP

Defined Types

AlaRDPIfEntry  
SEQUENCE    
  alaRDPIfAddr IpAddress
  alaRDPIfStatus INTEGER
  alaRDPIfAdvtAddress IpAddress
  alaRDPIfMaxAdvtInterval Unsigned32
  alaRDPIfMinAdvtInterval Unsigned32
  alaRDPIfAdvLifeTime Unsigned32
  alaRDPIfPrefLevel Integer32
  alaRDPIfRowStatus RowStatus
  alaRDPIfName SnmpAdminString
  alaRDPIPIfStatus INTEGER
  alaRDPVrrpStatus INTEGER

Defined Values

alcatelIND1RouterDiscoveryProtocolMIB 1.3.6.1.4.1.6486.801.1.2.1.10.11.1
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): This proprietary MIB contains management information for the configuration of Router Discovery Protocol global configuration parameters. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, o r consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2003 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
MODULE-IDENTITY    

alcatelIND1RDPMIBObjects 1.3.6.1.4.1.6486.801.1.2.1.10.11.1.1
OBJECT IDENTIFIER    

alaRDPConfig 1.3.6.1.4.1.6486.801.1.2.1.10.11.1.1.1
OBJECT IDENTIFIER    

alaRDPStatus 1.3.6.1.4.1.6486.801.1.2.1.10.11.1.1.1.1
Controls the status of Routing Discovery Protocol
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaRDPIfTable 1.3.6.1.4.1.6486.801.1.2.1.10.11.1.1.1.20
The table of addressing information relevant to this entity's IP addresses.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaRDPIfEntry

alaRDPIfEntry 1.3.6.1.4.1.6486.801.1.2.1.10.11.1.1.1.20.1
The addressing information for one of this entity's IP addresses.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaRDPIfEntry  

alaRDPIfAddr 1.3.6.1.4.1.6486.801.1.2.1.10.11.1.1.1.20.1.1
Interface IP Address of this Router.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

alaRDPIfStatus 1.3.6.1.4.1.6486.801.1.2.1.10.11.1.1.1.20.1.2
Indicates the status of the RDP interface
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaRDPIfAdvtAddress 1.3.6.1.4.1.6486.801.1.2.1.10.11.1.1.1.20.1.3
Default advertisement Address is 224.0.0.1
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

alaRDPIfMaxAdvtInterval 1.3.6.1.4.1.6486.801.1.2.1.10.11.1.1.1.20.1.4
Maximum advertisement interval is in seconds
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

alaRDPIfMinAdvtInterval 1.3.6.1.4.1.6486.801.1.2.1.10.11.1.1.1.20.1.5
Minimum advertisement interval in seconds: 0.75 * alaRDPIfMaxAdvtInterval
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

alaRDPIfAdvLifeTime 1.3.6.1.4.1.6486.801.1.2.1.10.11.1.1.1.20.1.6
Advertisement Lifetime in seconds: 3 * alaRDPIfMaxAdvtInterval
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

alaRDPIfPrefLevel 1.3.6.1.4.1.6486.801.1.2.1.10.11.1.1.1.20.1.7
Preference level for each IP address advertised on the interface: 0
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

alaRDPIfRowStatus 1.3.6.1.4.1.6486.801.1.2.1.10.11.1.1.1.20.1.8
The status of this table entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

alaRDPIfName 1.3.6.1.4.1.6486.801.1.2.1.10.11.1.1.1.20.1.9
The user defined name used to identify the IP interface
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

alaRDPIPIfStatus 1.3.6.1.4.1.6486.801.1.2.1.10.11.1.1.1.20.1.10
Indicates the status of the IP interface
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaRDPVrrpStatus 1.3.6.1.4.1.6486.801.1.2.1.10.11.1.1.1.20.1.11
Indicates the status of the VRRP interface
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alcatelIND1RDPMIBConformance 1.3.6.1.4.1.6486.801.1.2.1.10.11.1.2
OBJECT IDENTIFIER    

alcatelIND1RDPMIBCompliances 1.3.6.1.4.1.6486.801.1.2.1.10.11.1.2.1
OBJECT IDENTIFIER    

alcatelIND1RDPMIBGroups 1.3.6.1.4.1.6486.801.1.2.1.10.11.1.2.2
OBJECT IDENTIFIER    

alcatelIND1RDPMIBCompliance 1.3.6.1.4.1.6486.801.1.2.1.10.11.1.2.1.1
The compliance statement for router discovery protocol task and implementing the ALCATEL-IND1-RDP MIB.
Status: current Access: read-only
MODULE-COMPLIANCE    

alaRDPConfigMIBGroup 1.3.6.1.4.1.6486.801.1.2.1.10.11.1.2.2.1
A collection of objects to support management of RDP.
Status: current Access: read-only
OBJECT-GROUP