ALCATEL-IND1-QCN-MIB
File:
ALCATEL-IND1-QCN-MIB.mib (9013 bytes)
Imported modules
Imported symbols
Defined Types
| AlaQcnGlobalEntry |
|
| SEQUENCE |
|
|
|
| |
alaQcnGlobalCompId |
Integer32 |
|
| |
alaQcnGlobalCNMVlanTag |
Integer32 |
|
| |
alaQcnGlobalCID |
Integer32 |
|
| AlaQcnPortInstanceEntry |
|
| SEQUENCE |
|
|
|
| |
alaQcnPIIfIndex |
Unsigned32 |
|
| |
alaQcnPIPriority |
Unsigned32 |
|
| |
alaQcnPIPriorityReset |
TruthValue |
|
| |
alaQcnPICncpStatsClear |
TruthValue |
|
| |
alaQcnPICncpReset |
TruthValue |
|
Defined Values
| alcatelIND1QcnMIB |
1.3.6.1.4.1.6486.801.1.2.1.71.1 |
| This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
System Capability Manager, to allow for system control and limitation setting, of
different, features through out the system.
Capability manager is a centralized process which provides hardware information and
capability to other processes. To optimize the system performance , certain features
may be configured to a lower than the hardware limit through capability manager.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2011 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE |
| MODULE-IDENTITY |
|
|
|
| alcatelIND1QcnMIBObjects |
1.3.6.1.4.1.6486.801.1.2.1.71.1.1 |
| Branch For QCN Subsystem Managed Objects. |
| Status: current |
Access: read-only |
| OBJECT-IDENTITY |
|
|
|
| alcatelIND1QcnMIBGroups |
1.3.6.1.4.1.6486.801.1.2.1.71.1.2.1 |
| Branch For QCN Subsystem Units Of Conformance. |
| Status: current |
Access: read-only |
| OBJECT-IDENTITY |
|
|
|
| alcatelIND1QcnMIBCompliances |
1.3.6.1.4.1.6486.801.1.2.1.71.1.2.2 |
| Branch For QCN Subsystem Compliance Statements. |
| Status: current |
Access: read-only |
| OBJECT-IDENTITY |
|
|
|
| alaQcnConfig |
1.3.6.1.4.1.6486.801.1.2.1.71.1.1.1 |
| OBJECT IDENTIFIER |
|
|
|
| alaQcnGlobalTable |
1.3.6.1.4.1.6486.801.1.2.1.71.1.1.1.1 |
| A table of QCN global configuration. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
AlaQcnGlobalEntry |
|
| alaQcnGlobalEntry |
1.3.6.1.4.1.6486.801.1.2.1.71.1.1.1.1.1 |
| A QCN global Entry. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
AlaQcnGlobalEntry |
|
|
| alaQcnGlobalCompId |
1.3.6.1.4.1.6486.801.1.2.1.71.1.1.1.1.1.1 |
| Comp Id is the index to this table. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1 |
|
| alaQcnGlobalCNMVlanTag |
1.3.6.1.4.1.6486.801.1.2.1.71.1.1.1.1.1.2 |
| When set, the vlan tag overrides the incoming vlan id and forces
CNMs to be transmitted in that vlan. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..4094 |
|
| alaQcnGlobalCID |
1.3.6.1.4.1.6486.801.1.2.1.71.1.1.1.1.1.3 |
| Sets the Congestion Point ID sent as part of the Congestion
Notification Message. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..16777215 |
|
| alaQcnPortInstanceEntry |
1.3.6.1.4.1.6486.801.1.2.1.71.1.1.1.2.1 |
| A DCP Port Instance Entry. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
AlaQcnPortInstanceEntry |
|
|
| alaQcnPIIfIndex |
1.3.6.1.4.1.6486.801.1.2.1.71.1.1.1.2.1.1 |
| IfIndex of this port. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| alaQcnPIPriority |
1.3.6.1.4.1.6486.801.1.2.1.71.1.1.1.2.1.2 |
| Priority identifier of this port. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| alaQcnPIPriorityReset |
1.3.6.1.4.1.6486.801.1.2.1.71.1.1.1.2.1.3 |
| Set to true to reset the priority configuration to the global default. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
true(1) |
|
| alaQcnPICncpStatsClear |
1.3.6.1.4.1.6486.801.1.2.1.71.1.1.1.2.1.4 |
| Set to true to clear the cncp statistics for this port
priority. Will do nothing if stats are disabled. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
true(1) |
|
| alaQcnPICncpReset |
1.3.6.1.4.1.6486.801.1.2.1.71.1.1.1.2.1.5 |
| Set to true to reset the cncp configuration to the global default for
this port priority. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
true(1) |
|
| alcatelIND1QcnMIBCompliance |
1.3.6.1.4.1.6486.801.1.2.1.71.1.2.2.1 |
| Compliance statement for QCN Subsystem. |
| Status: current |
Access: read-write |
| MODULE-COMPLIANCE |
|
|
|
| alaQcnGlobalGroup |
1.3.6.1.4.1.6486.801.1.2.1.71.1.2.1.1 |
| Collection of Global QCN Configuration for management of QCN. |
| Status: current |
Access: read-write |
| OBJECT-GROUP |
|
|
|
| alaQcnPortInstanceGroup |
1.3.6.1.4.1.6486.801.1.2.1.71.1.2.1.2 |
| Collection of QCN Port level Configuration for management of QCN. |
| Status: current |
Access: read-write |
| OBJECT-GROUP |
|
|
|