ALCATEL-IND1-PORT-MIB

File: ALCATEL-IND1-PORT-MIB.mib (132904 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
SNMP-FRAMEWORK-MIB IF-MIB ALCATEL-IND1-BASE

Imported symbols

OBJECT-TYPE Counter64 NOTIFICATION-TYPE
MODULE-IDENTITY TimeTicks Integer32
MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP
DateAndTime DisplayString MacAddress
TEXTUAL-CONVENTION RowStatus SnmpAdminString
ifIndex ifInErrors ifOutErrors
ifEntry InterfaceIndex softentIND1Port

Defined Types

EsmConfEntry  
SEQUENCE    
  esmPortSlot Integer32
  esmPortIF Integer32
  esmPortAutoSpeed INTEGER
  esmPortAutoDuplexMode INTEGER
  esmPortCfgSpeed INTEGER
  esmPortCfgDuplexMode INTEGER
  esmPortAdminStatus INTEGER
  esmPortLinkUpDownTrapEnable INTEGER
  esmPortCfgMaxFrameSize Integer32
  esmPortAlias SnmpAdminString
  esmPortCfgPause INTEGER
  esmPortCfgAutoNegotiation INTEGER
  esmPortCfgCrossover INTEGER
  esmPortCfgHybridActiveType INTEGER
  esmPortCfgHybridMode INTEGER
  esmPortOperationalHybridType INTEGER
  esmPortBcastRateLimitEnable INTEGER
  esmPortBcastRateLimitType INTEGER
  esmPortBcastRateLimit Integer32
  esmPortMcastRateLimitEnable INTEGER
  esmPortMcastRateLimitType INTEGER
  esmPortMcastRateLimit Integer32
  esmPortUucastRateLimitEnable INTEGER
  esmPortUucastRateLimitType INTEGER
  esmPortUucastRateLimit Integer32
  esmPortIngressRateLimitEnable INTEGER
  esmPortIngressRateLimit Integer32
  esmPortIngressRateLimitBurst Integer32
  esmPortEPPEnable INTEGER
  esmPortEEEEnable INTEGER
  esmPortIsFiberChannelCapable INTEGER

AlcetherStatsEntry  
SEQUENCE    
  alcetherClearStats INTEGER
  alcetherLastClearStats TimeTicks
  alcetherStatsCRCAlignErrors Counter64
  alcetherStatsRxUndersizePkts Counter64
  alcetherStatsTxUndersizePkts Counter64
  alcetherStatsTxOversizePkts Counter64
  alcetherStatsRxJabbers Counter64
  alcetherStatsRxCollisions Counter64
  alcetherStatsTxCollisions Counter64
  alcetherStatsPkts64Octets Counter64
  alcetherStatsPkts65to127Octets Counter64
  alcetherStatsPkts128to255Octets Counter64
  alcetherStatsPkts256to511Octets Counter64
  alcetherStatsPkts512to1023Octets Counter64
  alcetherStatsPkts1024to1518Octets Counter64
  gigaEtherStatsPkts1519to4095Octets Counter64
  gigaEtherStatsPkts4096to9215Octets Counter64
  alcetherStatsPkts1519to2047Octets Counter64
  alcetherStatsPkts2048to4095Octets Counter64
  alcetherStatsPkts4096Octets Counter64
  alcetherStatsRxGiantPkts Counter64
  alcetherStatsRxDribbleNibblePkts Counter64
  alcetherStatsRxLongEventPkts Counter64
  alcetherStatsRxVlanTagPkts Counter64
  alcetherStatsRxControlPkts Counter64
  alcetherStatsRxLenChkErrPkts Counter64
  alcetherStatsRxCodeErrPkts Counter64
  alcetherStatsRxDvEventPkts Counter64
  alcetherStatsRxPrevPktDropped Counter64
  alcetherStatsTx64Octets Counter64
  alcetherStatsTx65to127Octets Counter64
  alcetherStatsTx128to255Octets Counter64
  alcetherStatsTx256to511Octets Counter64
  alcetherStatsTx512to1023Octets Counter64
  alcetherStatsTx1024to1518Octets Counter64
  alcetherStatsTx1519to2047Octets Counter64
  alcetherStatsTx2048to4095Octets Counter64
  alcetherStatsTx4096Octets Counter64
  alcetherStatsTxRetryCount Counter64
  alcetherStatsTxVlanTagPkts Counter64
  alcetherStatsTxControlPkts Counter64
  alcetherStatsTxLatePkts Counter64
  alcetherStatsTxTotalBytesOnWire Counter64
  alcetherStatsTxLenChkErrPkts Counter64
  alcetherStatsTxExcDeferPkts Counter64

EsmHybridConfEntry  
SEQUENCE    
  esmHybridPortCfgSpeed INTEGER
  esmHybridPortCfgDuplexMode INTEGER
  esmHybridPortCfgAutoNegotiation INTEGER
  esmHybridPortCfgCrossover INTEGER
  esmHybridPortCfgFlow INTEGER
  esmHybridPortCfgInactiveType INTEGER

DdmEntry  
SEQUENCE    
  ddmTemperature Integer32
  ddmTempLowWarning Integer32
  ddmTempLowAlarm Integer32
  ddmTempHiWarning Integer32
  ddmTempHiAlarm Integer32
  ddmSupplyVoltage Integer32
  ddmSupplyVoltageLowWarning Integer32
  ddmSupplyVoltageLowAlarm Integer32
  ddmSupplyVoltageHiWarning Integer32
  ddmSupplyVoltageHiAlarm Integer32
  ddmTxBiasCurrent Integer32
  ddmTxBiasCurrentLowWarning Integer32
  ddmTxBiasCurrentLowAlarm Integer32
  ddmTxBiasCurrentHiWarning Integer32
  ddmTxBiasCurrentHiAlarm Integer32
  ddmTxOutputPower Integer32
  ddmTxOutputPowerLowWarning Integer32
  ddmTxOutputPowerLowAlarm Integer32
  ddmTxOutputPowerHiWarning Integer32
  ddmTxOutputPowerHiAlarm Integer32
  ddmRxOpticalPower Integer32
  ddmRxOpticalPowerLowWarning Integer32
  ddmRxOpticalPowerLowAlarm Integer32
  ddmRxOpticalPowerHiWarning Integer32
  ddmRxOpticalPowerHiAlarm Integer32

DdmPortEntry  
SEQUENCE    
  ddmPortChannel Integer32
  ddmPortTemperature Integer32
  ddmPortTempLowWarning Integer32
  ddmPortTempLowAlarm Integer32
  ddmPortTempHiWarning Integer32
  ddmPortTempHiAlarm Integer32
  ddmPortSupplyVoltage Integer32
  ddmPortSupplyVoltageLowWarning Integer32
  ddmPortSupplyVoltageLowAlarm Integer32
  ddmPortSupplyVoltageHiWarning Integer32
  ddmPortSupplyVoltageHiAlarm Integer32
  ddmPortTxBiasCurrent Integer32
  ddmPortTxBiasCurrentLowWarning Integer32
  ddmPortTxBiasCurrentLowAlarm Integer32
  ddmPortTxBiasCurrentHiWarning Integer32
  ddmPortTxBiasCurrentHiAlarm Integer32
  ddmPortTxOutputPower Integer32
  ddmPortTxOutputPowerLowWarning Integer32
  ddmPortTxOutputPowerLowAlarm Integer32
  ddmPortTxOutputPowerHiWarning Integer32
  ddmPortTxOutputPowerHiAlarm Integer32
  ddmPortRxOpticalPower Integer32
  ddmPortRxOpticalPowerLowWarning Integer32
  ddmPortRxOpticalPowerLowAlarm Integer32
  ddmPortRxOpticalPowerHiWarning Integer32
  ddmPortRxOpticalPowerHiAlarm Integer32

AlcfcStatsEntry  
SEQUENCE    
  alcfcClearStats INTEGER
  alcfcLastClearStats TimeTicks
  alcfcStatsRxUndersizePkts Counter64
  alcfcStatsTxBBCreditZeros Counter64
  alcfcStatsRxBBCreditZeros Counter64
  alcfcStatsLinkFailures Counter64
  alcfcStatsLossofSynchs Counter64
  alcfcStatsLossofSignals Counter64
  alcfcStatsPrimSeqProtocolErrors Counter64
  alcfcStatsInvalidTxWords Counter64
  alcfcStatsInvalidCRCs Counter64
  alcfcStatsInvalidOrderedSets Counter64
  alcfcStatsFrameTooLongs Counter64
  alcfcStatsDelimiterErrors Counter64
  alcfcStatsEncodingDisparityErrors Counter64
  alcfcStatsOtherErrors Counter64

PortViolationEntry  
SEQUENCE    
  portViolationIfIndex InterfaceIndex
  portViolationSource INTEGER
  portViolationReason INTEGER
  portViolationAction INTEGER
  portViolationTimer TimeTicks
  portViolationTimerAction INTEGER
  portViolationClearPort INTEGER

AlaLinkMonConfigEntry  
SEQUENCE    
  alaLinkMonStatus INTEGER
  alaLinkMonTimeWindow Integer32
  alaLinkMonLinkFlapThreshold Integer32
  alaLinkMonLinkErrorThreshold Integer32
  alaLinkMonWaitToRestoreTimer Integer32
  alaLinkMonWaitToShutdownTimer Integer32

AlaLinkMonStatsEntry  
SEQUENCE    
  alaLinkMonStatsClearStats INTEGER
  alaLinkMonStatsPortState INTEGER
  alaLinkMonStatsCurrentLinkFlaps Counter64
  alaLinkMonStatsCurrentErrorFrames Counter64
  alaLinkMonStatsCurrentCRCErrors Counter64
  alaLinkMonStatsCurrentLostFrames Counter64
  alaLinkMonStatsCurrentAlignErrors Counter64
  alaLinkMonStatsCurrentLinkErrors Counter64
  alaLinkMonStatsTotalLinkFlaps Counter64
  alaLinkMonStatsTotalLinkErrors Counter64

AlaLFPGroupEntry  
SEQUENCE    
  alaLFPGroupId Integer32
  alaLFPGroupAdminStatus INTEGER
  alaLFPGroupOperStatus INTEGER
  alaLFPGroupWaitToShutdown Integer32
  alaLFPGroupRowStatus RowStatus

AlaLFPConfigEntry  
SEQUENCE    
  alaLFPConfigPort InterfaceIndex
  alaLFPConfigPortType INTEGER
  alaLFPConfigRowStatus RowStatus

Defined Values

alcatelIND1PortMIB 1.3.6.1.4.1.6486.801.1.2.1.5.1
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): This group contains the configuration information data for the Ethernet and Fiber Channel Switching Module. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2013 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
MODULE-IDENTITY    

alcatelIND1PortNotifications 1.3.6.1.4.1.6486.801.1.2.1.5.1.0
OBJECT IDENTIFIER    

alcatelIND1PortMIBObjects 1.3.6.1.4.1.6486.801.1.2.1.5.1.1
OBJECT IDENTIFIER    

alcatelIND1PortMIBConformance 1.3.6.1.4.1.6486.801.1.2.1.5.1.2
OBJECT IDENTIFIER    

esmConfTrap 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.1
OBJECT IDENTIFIER    

physicalPort 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2
OBJECT IDENTIFIER    

ddmConfiguration 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.4
OBJECT IDENTIFIER    

portViolations 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5
OBJECT IDENTIFIER    

csmConfTrap 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.6
OBJECT IDENTIFIER    

esmDrvTrapDrops 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.1.1
Partitioned port (separated due to errors).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

alaDyingGaspChassisId 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.6.1
This object specifies the chassis id of the chassis whose NI is going down.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

alaDyingGaspPowerSupplyType 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.6.2
This object specifies the type of the power supply.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER primary(1), backup(2), saps(3)  

alaDyingGaspTime 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.6.3
This object specifies the time of power failure.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DateAndTime  

esmConfTable 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1
A list of ESM Physical Port instances.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EsmConfEntry

esmConfEntry 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1
A ESM Physical Port entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  EsmConfEntry  

esmPortSlot 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.1
The physical Slot number for this Ethernet Port. Slot number has been added to be used by the private Trap.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

esmPortIF 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.2
The on-board interface number for this Ethernet Port. Port Number has been added to be used by the private Trap.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

esmPortAutoSpeed 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.3
The automatically detected port line speed of this ESM port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER speed100(1), speed10(2), speedAuto(3), unknown(4), speed1000(5), speed10000(6), speed40000(7)  

esmPortAutoDuplexMode 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.4
The automatically detected port duplex mode of this ESM port. Note: GigaEthernet supports only Full duplex mode. Default value for 10/100 = Half duplex mode.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER fullDuplex(1), halfDuplex(2), autoDuplex(3), unknown(4)  

esmPortCfgSpeed 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.5
The configured port line speed of this ESM port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER speed100(1), speed10(2), speedAuto(3), speed1000(5), speed10000(6), speed40000(7), speedMax100(8), speedMax1000(9)  

esmPortCfgDuplexMode 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.6
The configured port duplex mode of this ESM port. Note: GigaEthernet support only full-duplex.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER fullDuplex(1), halfDuplex(2), autoDuplex(3)  

esmPortAdminStatus 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.7
The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. When a managed system initializes, all interfaces start with ifAdminStatus in the down(2) state. As a result of either explicit management action or per configuration information retained by the managed system, ifAdminStatus is then changed to either the up(1) or testing(3) states (or remains in the down(2) state).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

esmPortLinkUpDownTrapEnable 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.8
Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enable(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disable(2) otherwise.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

esmPortCfgMaxFrameSize 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.11
Configure the value of the maximum frame size allow. For 10Mbps the range is upto 1518 bytes. For ports with speed > 10Mbps the value can extend upto 9216 bytes.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

esmPortAlias 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.12
This object is an 'alias' name for the interface as specified by a network manager, and provides a non-volatile 'handle' for the interface. On the first instantiation of an interface, the value of ifAlias associated with that interface is the zero-length string. As and when a value is written into an instance of ifAlias through a network management set operation, then the agent must retain the supplied value in the ifAlias instance associated with the same interface for as long as that interface remains instantiated, including across all re- initializations/reboots of the network management system, including those which result in a change of the interface's ifIndex value. An example of the value which a network manager might store in this object for a WAN interface is the (Telco's) circuit number/identifier of the interface. Some agents may support write-access only for interfaces having particular values of ifType. An agent which supports write access to this object is required to keep the value in non-volatile storage, but it may limit the length of new values depending on how much storage is already occupied by the current values for other interfaces.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..64)  

esmPortCfgPause 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.13
This object is used to configure the default administrative PAUSE mode for this interface. This object represents the administratively-configured PAUSE mode for this interface. If auto-negotiation is not enabled or is not implemented for the active MAU attached to this interface, the value of this object determines the operational PAUSE mode of the interface whenever it is operating in full-duplex mode. In this case, a set to this object will force the interface into the specified mode. If auto-negotiation is implemented and enabled for the MAU attached to this interface, the PAUSE mode for this interface is determined by auto-negotiation, and the value of this object denotes the mode to which the interface will automatically revert if/when auto-negotiation is later disabled. For more information on what pause values will be autonegotiated based on settings on this object, please refer to the truth table in the users manual. Note that the value of this object is ignored when the interface is not operating in full-duplex mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabledXmit(2), enabledRcv(3), enabledXmitAndRcv(4)  

esmPortCfgAutoNegotiation 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.15
Allow the user to enable or disable the port auto negotiation.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

esmPortCfgCrossover 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.16
Allow the user to configure port crossover. This object is applicable only to copper ports. For fiber ports notapplicable is returned as a status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER mdi(1), mdix(2), auto(3), notapplicable(4)  

esmPortCfgHybridActiveType 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.18
This object is only applicable to hybrid ports . It indicates configured active media type.(the operational media type may be different if esmPortCfgHybridMode is configured to be preferredFiber or preferredCopper) For non hybrid ports notapplicable is returned as a status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notapplicable(0), fiber(1), copper(2)  

esmPortCfgHybridMode 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.19
This object is only applicable to hybrid ports. This allows the user the user to configure the media type with which the port should come up. The user can configure the port to come as copper only or fiber only or either fiber/copper (with preference to one of them).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notapplicable(0), preferredCopper(1), forcedCopper(2), preferredFiber(3), forcedFiber(4)  

esmPortOperationalHybridType 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.20
This object is only applicable to hybrid ports . It indicates the actual media type that has link up and is or will be passing traffic. If link is not present the object will return none(0) value.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), fiber(1), copper(2)  

esmPortBcastRateLimitEnable 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.21
Enable/disable per port broadcast traffic rate limit. When 'enable' value from esmPortBcastRateLimit object will be applicable to the ingressing broadcast traffic if the speed is greater than the limit else the default limit for the speed will be applied. When it is 'disable' no limit is applied to incoming broadcast traffic which is limited by the port speed.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

esmPortBcastRateLimitType 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.22
The unit applicable to the value in esmPortBcastRateLimit object.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER mbps(1), percentage(2), pps(3)  

esmPortBcastRateLimit 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.23
The value of the maximum broadcast traffic that can flow through the port. The actual value depends on the port speed if the configured values is greater than the current port speed.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

esmPortMcastRateLimitEnable 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.24
Enable/disable per port multicast traffic rate limit. When 'enable' value from esmPortMcastRateLimit object will be applicable to the ingressing multicast traffic if the speed is greater than the limit else the default limit for the speed will be applied. When it is 'disable' no limit is applied to incoming multicast traffic which is limited by the port speed.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

esmPortMcastRateLimitType 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.25
The unit applicable to the value in esmPortMcastRateLimit object.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER mbps(1), percentage(2), pps(3)  

esmPortMcastRateLimit 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.26
The value of the maximum multicast traffic that can flow through the port. The actual value depends on the port speed if the configured values is greater than the current port speed.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

esmPortUucastRateLimitEnable 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.27
Enable/disable per port unknown unicast traffic rate limit. When 'enable' value from esmPortUucastRateLimit object will be applicable to the ingressing unknown unicast traffic if the speed is greater than the limit else the default limit for the speed will be applied. When it is 'disable' no limit is applied to incoming unknown unicast traffic which is limited by the port speed.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

esmPortUucastRateLimitType 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.28
The unit applicable to the value in esmPortUucastRate object.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER mbps(1), percentage(2), pps(3)  

esmPortUucastRateLimit 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.29
The value of the maximum unknown unicast traffic that can flow through the port. The actual value depends on the port speed if the configured values is greater than the current port speed.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

esmPortIngressRateLimitEnable 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.30
Enable/disable per port ingress traffic rate limit. When 'enable' value from esmPortIngressRate object will be applicable to the ingressing traffic (BC, MC, UUC) if the speed is greater than the limit else the default limit for the speed will be applied. When it is 'disable' no limit is applied to incoming traffic which is limited by the port speed.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

esmPortIngressRateLimit 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.31
The value of the maximum ingress traffic that can flow through the port. The actual value depends on the port speed if the configured value is greater than the current port speed.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

esmPortIngressRateLimitBurst 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.32
The value of ingress traffic burst size in Mbits.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

esmPortEPPEnable 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.33
use for port diagnostics
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

esmPortEEEEnable 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.34
10Gbase-T Energy Efficent Ethernet port parameter.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

esmPortIsFiberChannelCapable 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.35
The port can be configured as Fiber Channel interface (yes) or can not be configured as Fiber Channel interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alcetherStatsTable 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2
A list of Ethernet statistics entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlcetherStatsEntry

alcetherStatsEntry 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1
A collection of statistics kept for a particular Ethernet interface. As an example, an instance of the etherStatsPkts object might be named alcetherStatsPkts.1
Status: current Access: not-accessible
OBJECT-TYPE    
  AlcetherStatsEntry  

alcetherClearStats 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.1
Used to Clear all Statistics counters. By default, this object contains zero value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER default(0), reset(1)  

alcetherLastClearStats 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.2
The value of SysUpTime at the time of all the statistics counters are cleared. By default, this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

alcetherStatsCRCAlignErrors 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.3
The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsRxUndersizePkts 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.4
The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsTxUndersizePkts 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.5
The total number of packets transmitted that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsTxOversizePkts 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.6
The total number of packets transmitted that were longer than 1518 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsRxJabbers 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.7
The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsRxCollisions 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.8
The best estimate of the total number of collisions on this Ethernet segment (in reception). Only for Ethernet Interfaces. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must detect a collision, in the receive mode, if three or more stations are transmitting simultaneously. A repeater port must detect a collision when two or more stations are transmitting simultaneously. Thus a probe placed on a repeater port could record more collisions than a probe connected to a station on the same segment would. Probe location plays a much smaller role when considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the simultaneous presence of signals on the DO and RD circuits (transmitting and receiving at the same time). A 10BASE-T station can only detect collisions when it is transmitting. Thus probes placed on a station and a repeater, should report the same number of collisions. Note also that an RMON probe inside a repeater should ideally report collisions between the repeater and one or more other hosts (transmit collisions as defined by IEEE 802.3k) plus receiver collisions observed on any coax segments to which the repeater is connected.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsTxCollisions 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.9
The best estimate of the total number of collisions on this Ethernet segment (in transmition). Only for Ethernet Interfaces. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must detect a collision, in the receive mode, if three or more stations are transmitting simultaneously. A repeater port must detect a collision when two or more stations are transmitting simultaneously. Thus a probe placed on a repeater port could record more collisions than a probe connected to a station on the same segment would. Probe location plays a much smaller role when considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the simultaneous presence of signals on the DO and RD circuits (transmitting and receiving at the same time). A 10BASE-T station can only detect collisions when it is transmitting. Thus probes placed on a station and a repeater, should report the same number of collisions. Note also that an RMON probe inside a repeater should ideally report collisions between the repeater and one or more other hosts (transmit collisions as defined by IEEE 802.3k) plus receiver collisions observed on any coax segments to which the repeater is connected.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsPkts64Octets 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.10
The total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsPkts65to127Octets 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.11
The total number of packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsPkts128to255Octets 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.12
The total number of packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsPkts256to511Octets 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.13
The total number of packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsPkts512to1023Octets 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.14
The total number of packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsPkts1024to1518Octets 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.15
The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets). For both Ethernet and GigaEthernet.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

gigaEtherStatsPkts1519to4095Octets 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.16
The total number of packets (including bad packets) received that were between 1519 and 4095 octets in length inclusive (excluding framing bits but including FCS octets). Only for GigaEthernet interfaces
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

gigaEtherStatsPkts4096to9215Octets 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.17
The total number of packets (including bad packets) received that were between 4096 and 9215 octets in length inclusive (excluding framing bits but including FCS octets). Only for GigaEthernet interfaces
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsPkts1519to2047Octets 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.18
The total number of frames(including error packets) received that were between 1519 and 2047 bytes in length inclusive (excluding framing bits but including FCS bytes).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsPkts2048to4095Octets 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.19
The total number of frames(including error packets) received that were between 2048 and 4095 bytes in length inclusive (excluding framing bits but including FCS bytes).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsPkts4096Octets 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.20
The total number of frames(including error packets) received that were greater than or equal to 4096 bytes in length inclusive (excluding framing bits but including FCS bytes).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsRxGiantPkts 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.21
The total number of frames that are greater than the specified Max length value, with a valid CRC, dropped because too long.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsRxDribbleNibblePkts 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.22
The total number of frames for which a dribble nibble has been received and CRC is correct.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsRxLongEventPkts 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.23
The total number of frames for which the Carrier sense exceeds 50000 bit times for 10 Mbits/sec or 80000 bit times for 100 Mbits/sec.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsRxVlanTagPkts 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.24
The total number of frames for which Type/Length field contains the VLAN protocol identifier (0x8100).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsRxControlPkts 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.25
The total number of frames that were recognized as control frames.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsRxLenChkErrPkts 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.26
The total number of frames for which the frame length field value in the Type/Length field does not match the actual data bytes length and is NOT a type field.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsRxCodeErrPkts 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.27
The total number of frames for which one or more nibbles were signaled as errors during reception of the frame.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsRxDvEventPkts 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.28
The total number of frames for which a RX_DV event (packet not too long enough to be valid packet) has been seen before the correct frame.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsRxPrevPktDropped 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.29
The total number of frames for which a packet has been dropped (because of too small IFG) before the correct frame.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsTx64Octets 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.30
The total number of transmitted frames of 64 bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsTx65to127Octets 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.31
The total number of transmitted frames that were between 65 and 127 bytes in length inclusive (excluding framing bits but including FCS bytes).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsTx128to255Octets 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.32
The total number of transmitted frames that were between 128 and 255 bytes in length inclusive (excluding framing bits but including FCS bytes).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsTx256to511Octets 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.33
The total number of transmitted frames that were between 256 and 511 bytes in length inclusive (excluding framing bits but including FCS bytes).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsTx512to1023Octets 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.34
The total number of transmitted frames that were between 512 and 1023 bytes in length inclusive (excluding framing bits but including FCS bytes).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsTx1024to1518Octets 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.35
The total number of transmitted frames that were between 1024 and 1518 bytes in length inclusive (excluding framing bits but including FCS bytes).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsTx1519to2047Octets 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.36
The total number of transmitted frames that were between 1519 and 2047 bytes in length inclusive (excluding framing bits but including FCS bytes).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsTx2048to4095Octets 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.37
The total number of transmitted frames that were between 2048 and 4095 bytes in length inclusive (excluding framing bits but including FCS bytes).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsTx4096Octets 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.38
The total number of transmitted frames that were greater than or equal to 4096 bytes in length and less than Max frame length (excluding framing bits but including FCS bytes).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsTxRetryCount 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.39
The total number of collisions that the frames faced during transmission attempts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsTxVlanTagPkts 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.40
The total number of transmitted frames for which Type/Length field contains the VLAN protocol identifier (0x8100).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsTxControlPkts 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.41
The total number of transmitted frames that were recognised as control frames.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsTxLatePkts 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.42
The total number of late collisions that occured beyond the collision window.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsTxTotalBytesOnWire 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.43
The total number of bytes transmitted on wire, including all bytes from collided attempts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsTxLenChkErrPkts 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.44
The total number of transmitted frames for which the frame length field value in the Type/Length field does not match the actual data bytes length and is NOT a Type field.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcetherStatsTxExcDeferPkts 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.45
The total number of frames that were deferred in excess of 6071 nibble-times in 100 Mbps, 24287 bit-times in 10 Mbps mode. These frames are dropped.(This stat is only in case of Half duplex and excessive defer bit reset).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

esmHybridConfTable 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.3
A list of inactive hybrid port instances.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EsmHybridConfEntry

esmHybridConfEntry 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.3.1
A ESM Physical Port entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  EsmHybridConfEntry  

esmHybridPortCfgSpeed 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.3.1.1
The configured port line speed of this ESM port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER speed100(1), speed10(2), speedAuto(3), speed1000(5), speed10000(6), speedMax100(8), speedMax1000(9)  

esmHybridPortCfgDuplexMode 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.3.1.2
The configured port duplex mode of this ESM port. Note: GigaEthernet support only full-duplex.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER fullDuplex(1), halfDuplex(2), autoDuplex(3)  

esmHybridPortCfgAutoNegotiation 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.3.1.3
Allow the user to enable or disable the port auto negotiation.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

esmHybridPortCfgCrossover 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.3.1.4
Allow the user to configure port crossover.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER mdi(1), mdix(2), auto(3)  

esmHybridPortCfgFlow 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.3.1.5
This object is used for flow control of hybrid ports. It is similar to the dot3PauseAdminMode object in dot3PauseTable. It is used to configure pause for fiber media.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enabledXmit(2), enabledRcv(3), enabledXmitAndRcv(4)  

esmHybridPortCfgInactiveType 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.3.1.6
This object is only applicable to hybrid ports . It indicates the configured inactive media type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER fiber(1), copper(2)  

ddmConfig 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.4.1
This object enables/disables DDM software feature in the system.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ddmTrapConfig 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.4.2
This objects enables/disables traps for DDM warning/alarm threshold violations.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ddmNotificationType 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.4.3
This object defines the trap type for monitored DDM parameters.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER clearViolation(1), highAlarm(2), highWarning(3), lowWarning(4), lowAlarm(5)  

ddmInfoTable 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5
The ddmInfoTable has an entry for each SFP/XFP in the system that supports Digital Diagnostic Monitoring (DDM). The table is indexed by ifIndex. Each row in this table is dynamically added and removed internally by the system based on the presence or absence of DDM capable SFP/XFP components.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DdmEntry

ddmInfoEntry 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1
Each row represents a particular SFP/XFP that supports Digital Diagnostic Monitoring. Entries are created and deleted internally by the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  DdmEntry  

ddmTemperature 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.1
The value of ddmTemperature indicates the current temperature of the SFP/XFP in 1000s of degrees Celsius. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | -150000..150000  

ddmTempLowWarning 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.2
The value of ddmTempLowWarning indicates the temperature of the SFP/XFP in 1000s of degrees Celsius that triggers a low-warning. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | -150000..150000  

ddmTempLowAlarm 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.3
The value of ddmTempLowAlarm indicates the temperature of the SFP/XFP in 1000s of degrees Celsius that triggers a low-alarm. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | -150000..150000  

ddmTempHiWarning 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.4
The value of ddmTempHiWarning indicates the temperature of the SFP/XFP in 1000s of degrees Celsius that triggers a hi-warning. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | -150000..150000  

ddmTempHiAlarm 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.5
The value of ddmTempHiAlarm indicates the temperature of the SFP/XFP in 1000s of degrees Celsius that triggers a hi-alarm. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | -150000..150000  

ddmSupplyVoltage 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.6
The value of ddmSupplyVoltage indicates the current supply voltage of the SFP/XFP in 1000s of Volts (V). A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | 0..10000  

ddmSupplyVoltageLowWarning 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.7
The value of ddmSupplyVoltageLowWarning indicates the supply voltage of the SFP/XFP in 1000s of Volts (V) that triggers a low-warning. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | 0..10000  

ddmSupplyVoltageLowAlarm 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.8
The value of ddmSupplyVoltageLowAlarm indicates the supply voltage of the SFP/XFP in 1000s of Volts (V) that triggers a low-alarm. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | 0..10000  

ddmSupplyVoltageHiWarning 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.9
The value of ddmSupplyVoltageHiWarning indicates the supply voltage of the SFP/XFP in 1000s of Volts (V) that triggers a hi-warning. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | 0..10000  

ddmSupplyVoltageHiAlarm 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.10
The value of ddmSupplyVoltageHiAlarm indicates the supply voltage of the SFP/XFP in 1000s of Volts (V) that triggers a hi-alarm. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | 0..10000  

ddmTxBiasCurrent 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.11
The value of ddmTxBiasCurrent indicates the current Transmit Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA). A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | 0..10000  

ddmTxBiasCurrentLowWarning 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.12
The value of ddmTxBiasCurrentLowWarning indicates the Transmit Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA) that triggers a low-warning. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | 0..10000  

ddmTxBiasCurrentLowAlarm 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.13
The value of ddmTxBiasCurrentLowAlarm indicates the Transmit Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA) that triggers a low-alarm. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | 0..10000  

ddmTxBiasCurrentHiWarning 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.14
The value of ddmTxBiasCurrentHiWarning indicates the Transmit Bias Current of the SFP/XFP in 1000s milli-Amperes (mA) that triggers a hi-warning. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | 0..10000  

ddmTxBiasCurrentHiAlarm 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.15
The value of ddmTxBiasCurrentHiAlarm indicates the Transmit Bias Current of the SFP/XFP in 1000s milli-Amperes (mA) that triggers a hi-alarm. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | 0..10000  

ddmTxOutputPower 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.16
The value of ddmTxOutputPower indicates the current Output Power of the SFP/XFP in 1000s of dBm. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | -40000..10000  

ddmTxOutputPowerLowWarning 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.17
The value of ddmTxOutputPowerLowWarning indicates the Output Power of the SFP/XFP in 1000s of dBm that triggers a low-warning. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | -40000..10000  

ddmTxOutputPowerLowAlarm 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.18
The value of ddmTxOutputPowerLowAlarm indicates the Output Power of the SFP/XFP in 1000s of dBm that triggers a low-alarm. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | -40000..10000  

ddmTxOutputPowerHiWarning 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.19
The value of ddmTxOutputPowerHiWarning indicates the Output Power of the SFP/XFP in 1000s of dBm that triggers a hi-alarm. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | -40000..10000  

ddmTxOutputPowerHiAlarm 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.20
The value of ddmTxOutputPowerHiAlarm indicates the Output Power of the SFP/XFP in 1000s of dBm that triggers a hi-alarm. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | -40000..10000  

ddmRxOpticalPower 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.21
The value of ddmRxOpticalPower indicates the current Received Optical Power of the SFP/XFP in 1000s of dBm. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | -40000..10000  

ddmRxOpticalPowerLowWarning 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.22
The value of ddmRxOpticalPowerLowWarning indicates the Received Optical Power of the SFP/XFP in 1000s of dBm that triggers a low-warning. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | -40000..10000  

ddmRxOpticalPowerLowAlarm 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.23
The value of ddmRxOpticalPowerLowAlarm indicates the Received Optical Power of the SFP/XFP in 1000s of dBm that triggers a low-alarm. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | -40000..10000  

ddmRxOpticalPowerHiWarning 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.24
The value of ddmRxOpticalPowerHiWarning indicates the Received Optical Power of the SFP/XFP in 1000s of dBm that triggers a hi-warning. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | -40000..10000  

ddmRxOpticalPowerHiAlarm 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.25
The value of ddmRxOpticalPowerHiAlarm indicates the Received Optical Power of the SFP/XFP in 1000s of dBm that triggers a hi-alarm. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | -40000..10000  

ddmPortInfoTable 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6
The ddmPortInfoTable has an entry for each SFP/XFP in the system that supports Digital Diagnostic Monitoring (DDM). The table is indexed by ifIndex and port channel. Each row in this table is dynamically added and removed internally by the system based on the presence or absence of DDM capable SFP/XFP components.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DdmPortEntry

ddmPortInfoEntry 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1
Each row represents a particular SFP/XFP that supports Digital Diagnostic Monitoring. Entries are created and deleted internally by the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  DdmPortEntry  

ddmPortChannel 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.1
The channel number of the data that is being read. In the case of a QSFP there will be 4 10 gigabyte channels, for SFP/XFP there will only be one.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4  

ddmPortTemperature 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.2
The value of ddmTemperature indicates the current temperature of the SFP/XFP in 1000s of degrees Celsius. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | -150000..150000  

ddmPortTempLowWarning 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.3
The value of ddmTempLowWarning indicates the temperature of the SFP/XFP in 1000s of degrees Celsius that triggers a low-warning. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | -150000..150000  

ddmPortTempLowAlarm 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.4
The value of ddmTempLowAlarm indicates the temperature of the SFP/XFP in 1000s of degrees Celsius that triggers a low-alarm. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | -150000..150000  

ddmPortTempHiWarning 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.5
The value of ddmTempHiWarning indicates the temperature of the SFP/XFP in 1000s of degrees Celsius that triggers a hi-warning. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | -150000..150000  

ddmPortTempHiAlarm 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.6
The value of ddmTempHiAlarm indicates the temperature of the SFP/XFP in 1000s of degrees Celsius that triggers a hi-alarm. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | -150000..150000  

ddmPortSupplyVoltage 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.7
The value of ddmSupplyVoltage indicates the current supply voltage of the SFP/XFP in 1000s of Volts (V). A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | 0..10000  

ddmPortSupplyVoltageLowWarning 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.8
The value of ddmSupplyVoltageLowWarning indicates the supply voltage of the SFP/XFP in 1000s of Volts (V) that triggers a low-warning. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | 0..10000  

ddmPortSupplyVoltageLowAlarm 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.9
The value of ddmSupplyVoltageLowAlarm indicates the supply voltage of the SFP/XFP in 1000s of Volts (V) that triggers a low-alarm. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | 0..10000  

ddmPortSupplyVoltageHiWarning 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.10
The value of ddmSupplyVoltageHiWarning indicates the supply voltage of the SFP/XFP in 1000s of Volts (V) that triggers a hi-warning. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | 0..10000  

ddmPortSupplyVoltageHiAlarm 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.11
The value of ddmSupplyVoltageHiAlarm indicates the supply voltage of the SFP/XFP in 1000s of Volts (V) that triggers a hi-alarm. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | 0..10000  

ddmPortTxBiasCurrent 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.12
The value of ddmTxBiasCurrent indicates the current Transmit Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA). A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | 0..10000  

ddmPortTxBiasCurrentLowWarning 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.13
The value of ddmTxBiasCurrentLowWarning indicates the Transmit Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA) that triggers a low-warning. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | 0..10000  

ddmPortTxBiasCurrentLowAlarm 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.14
The value of ddmTxBiasCurrentLowAlarm indicates the Transmit Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA) that triggers a low-alarm. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | 0..10000  

ddmPortTxBiasCurrentHiWarning 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.15
The value of ddmTxBiasCurrentHiWarning indicates the Transmit Bias Current of the SFP/XFP in 1000s milli-Amperes (mA) that triggers a hi-warning. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | 0..10000  

ddmPortTxBiasCurrentHiAlarm 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.16
The value of ddmTxBiasCurrentHiAlarm indicates the Transmit Bias Current of the SFP/XFP in 1000s milli-Amperes (mA) that triggers a hi-alarm. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | 0..10000  

ddmPortTxOutputPower 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.17
The value of ddmTxOutputPower indicates the current Output Power of the SFP/XFP in 1000s of dBm. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | -40000..10000  

ddmPortTxOutputPowerLowWarning 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.18
The value of ddmTxOutputPowerLowWarning indicates the Output Power of the SFP/XFP in 1000s of dBm that triggers a low-warning. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | -40000..10000  

ddmPortTxOutputPowerLowAlarm 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.19
The value of ddmTxOutputPowerLowAlarm indicates the Output Power of the SFP/XFP in 1000s of dBm that triggers a low-alarm. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | -40000..10000  

ddmPortTxOutputPowerHiWarning 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.20
The value of ddmTxOutputPowerHiWarning indicates the Output Power of the SFP/XFP in 1000s of dBm that triggers a hi-alarm. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | -40000..10000  

ddmPortTxOutputPowerHiAlarm 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.21
The value of ddmTxOutputPowerHiAlarm indicates the Output Power of the SFP/XFP in 1000s of dBm that triggers a hi-alarm. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | -40000..10000  

ddmPortRxOpticalPower 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.22
The value of ddmRxOpticalPower indicates the current Received Optical Power of the SFP/XFP in 1000s of dBm. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | -40000..10000  

ddmPortRxOpticalPowerLowWarning 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.23
The value of ddmRxOpticalPowerLowWarning indicates the Received Optical Power of the SFP/XFP in 1000s of dBm that triggers a low-warning. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | -40000..10000  

ddmPortRxOpticalPowerLowAlarm 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.24
The value of ddmRxOpticalPowerLowAlarm indicates the Received Optical Power of the SFP/XFP in 1000s of dBm that triggers a low-alarm. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | -40000..10000  

ddmPortRxOpticalPowerHiWarning 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.25
The value of ddmRxOpticalPowerHiWarning indicates the Received Optical Power of the SFP/XFP in 1000s of dBm that triggers a hi-warning. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | -40000..10000  

ddmPortRxOpticalPowerHiAlarm 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.26
The value of ddmRxOpticalPowerHiAlarm indicates the Received Optical Power of the SFP/XFP in 1000s of dBm that triggers a hi-alarm. A value of -200000 indicates this object is not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -200000 | -40000..10000  

alcfcStatsTable 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7
A list of Fiber Channel statistics entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlcfcStatsEntry

alcfcStatsEntry 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1
A collection of statistics kept for a particular Fiber Channel interface. As an example, an instance of the fcStatsPkts object might be named alcfcStatsPkts.1
Status: current Access: not-accessible
OBJECT-TYPE    
  AlcfcStatsEntry  

alcfcClearStats 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.1
Used to Clear all Statistics counters. By default, this object contains zero value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER default(0), reset(1)  

alcfcLastClearStats 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.2
The value of SysUpTime at the time of all the statistics counters are cleared. By default, this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

alcfcStatsRxUndersizePkts 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.3
The total number of packets received that were less than 36 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcfcStatsTxBBCreditZeros 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.6
The number of transitions in/out of the buffer-to-buffer credit zero state.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcfcStatsRxBBCreditZeros 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.7
The number of times RX BBCredit drops to zero.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcfcStatsLinkFailures 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.8
The number of link failures.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcfcStatsLossofSynchs 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.9
The number of loss of word-sync detected.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcfcStatsLossofSignals 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.10
The number of loss of signals detected.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcfcStatsPrimSeqProtocolErrors 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.11
The number of primitive sequence protocol errors detected.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcfcStatsInvalidTxWords 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.12
The number of invalid transmission words. This includes invalid ordered sets and invalid data words.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcfcStatsInvalidCRCs 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.13
The number of frames received with an invalid CRC.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcfcStatsInvalidOrderedSets 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.14
The number of invalid ordered sets received at this port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcfcStatsFrameTooLongs 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.15
The number of frames received at this port for which the frame length was greater than what was agreed to in FLOGI/PLOGI.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcfcStatsDelimiterErrors 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.16
The number of invalid delimiters received
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcfcStatsEncodingDisparityErrors 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.17
The number of detected running disparity at 10b/8b level.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alcfcStatsOtherErrors 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.18
The number of errors detected but not counted by any other error counter. This only includes RX frames drops due to zero RX BBCredits
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  


ddmTemperatureThresholdViolated 1.3.6.1.4.1.6486.801.1.2.1.5.1.0.2
This object notifies management station if an SFP/XFP/SFP+ temperature has crossed any threshold or reverted from previous threshold violation for a port represented by ifIndex. It also provides the current realtime value of SFP/XFP/SFP+ temperature.
Status: current Access: read-only
NOTIFICATION-TYPE    

ddmVoltageThresholdViolated 1.3.6.1.4.1.6486.801.1.2.1.5.1.0.3
This object notifies management station if an SFP/XFP/SFP+ supply voltage has crossed any threshold or reverted from previous threshold violation for a port represented by ifIndex. It also provides the current realtime value of SFP/XFP/SFP+ supply voltage.
Status: current Access: read-only
NOTIFICATION-TYPE    

ddmCurrentThresholdViolated 1.3.6.1.4.1.6486.801.1.2.1.5.1.0.4
This object notifies management station if an SFP/XFP/SFP+ Tx bias current has crossed any threshold or reverted from previous threshold violation for a port represented by ifIndex. It also provides the current realtime value of SFP/XFP/SFP+ Tx bias current.
Status: current Access: read-only
NOTIFICATION-TYPE    

ddmTxPowerThresholdViolated 1.3.6.1.4.1.6486.801.1.2.1.5.1.0.5
This object notifies management station if an SFP/XFP/SFP+ Tx output power has crossed any threshold or reverted from previous threshold violation for a port represented by ifIndex. It also provides the current realtime value of SFP/XFP/SFP+ Tx output power.
Status: current Access: read-only
NOTIFICATION-TYPE    

ddmRxPowerThresholdViolated 1.3.6.1.4.1.6486.801.1.2.1.5.1.0.6
This object notifies management station if an SFP/XFP/SFP+ Rx optical power has crossed any threshold or reverted from previous threshold violation for a port represented by ifIndex. It also provides the current realtime value of SFP/XFP/SFP+ Rx optical power.
Status: current Access: read-only
NOTIFICATION-TYPE    

portViolationTable 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1
This table contains the port Violations per port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortViolationEntry

portViolationEntry 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1
Port Violation Entry. The entries in this table are indexed by 3 units, 1. ifIndex of the port for which the violation is set 2. source of the violation, the feature or module 3. reason for the violation (sub reason under each source).
Status: current Access: not-accessible
OBJECT-TYPE    
  PortViolationEntry  

portViolationIfIndex 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.1
The IfIndex of the port that has a violation.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

portViolationSource 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.2
Indicates the source of the port violation. The source is the feature or module that has caused the violation. The list is given below 1. Initiated by Source Learning 2. Initiated by QOS Policy 3. Initiated by Net Sec 4. Initiated by UDLD 5. Initiated by NI supervison (Fabric Stability). When there is no value the value of this will be 0
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER srcLrn(1), qos(2), netsec(3), udld(4), nisup(5), lfp(8), lm(9)  

portViolationReason 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.3
The Reason for the port violation. This will be application specific. The Reason indicate the violation for the 1st Violation that happened on this port.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER pvSLLpsShutDown(1), pvSLLpsRestrict(2), pvQosPolicy(3), pvQosSpoofed(4), pvQosBpdu(5), pvQosBgp(6), pvQosOspf(7), pvQosRip(8), pvQosVrrp(9), pvQosDhcp(10), pvQosPim(11), pvQosDvmrp(12), pvQosIsis(13), pvQosDnsReply(14), pvUdld(15), pvLfpShutDown(17)  

portViolationAction 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.4
The action determines on violation, what action will taken. Either the port would be shutdown or Admin Down or wait for the timer to expire and the timerAction will determine what needs to be done.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER portDown(1), portAdminDown(2), portTimerDown(3), portTimerAdminDown(4)  

portViolationTimer 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.5
If any timer is associated with the violation This is Zero if no timer is associated.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

portViolationTimerAction 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.6
The Timer related action. If set to portDownAfterTimer, no operation will be performed on the port and the port will be shutdown after timer expiry. If set to portUpAfterTimer the port will be shutdown immediately and after the timer expiry the port will brought up..
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER portNoTimerAction(0), portDownAfterTimer(1), portUpAfterTimer(2)  

portViolationClearPort 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.7
When this MIB object is set all violation on the given port will be cleared. The Indices portViolationSource and portViolationReason should be set to 0
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER inactive(0), set(1)  

alaLinkMonConfigTable 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.2
A list of Link Monitoring Configuration Parameters
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaLinkMonConfigEntry

alaLinkMonConfigEntry 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.2.1
A collection of Link Monitoring configurations kept for a particular Ethernet interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaLinkMonConfigEntry  

alaLinkMonStatus 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.2.1.1
Allows the user to enable or disable Link Monitoring on the port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaLinkMonTimeWindow 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.2.1.2
Indicates the number of seconds the Link will be monitored for a port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..3600  

alaLinkMonLinkFlapThreshold 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.2.1.3
Indicaes the number of link flaps allowed for the specified port during the time window before the port is shutdown.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 2..10  

alaLinkMonLinkErrorThreshold 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.2.1.4
Indicates the number of link errors allowed on Rx for the specified port during the time window before the port is shutdown. The errors are the MAC errors that include CRC, lost frames, error frames, alignment frames.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..100  

alaLinkMonWaitToRestoreTimer 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.2.1.5
Indicates the number of seconds after which the link up event is notified to other applications. The timer is started whenever a Link Up is detected on a port being monitored.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..300  

alaLinkMonWaitToShutdownTimer 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.2.1.6
Indicates the number of milli seconds after which the link down event is notified to other applications. The timer is started whenever a Link down is detected on a port being monitored.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..3000  

alaLinkMonStatsTable 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3
A list of Link Monitoring Statistics
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaLinkMonStatsEntry

alaLinkMonStatsEntry 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1
A collection of Link Monitoring statistics for a particular Ethernet interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaLinkMonStatsEntry  

alaLinkMonStatsClearStats 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.1
Used to Clear all Statistics counters. The value reset (1) indicates that Link Monitoring shuold all statistic counters related to the particular port. By default, this object contains zero value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER default(1), reset(2)  

alaLinkMonStatsPortState 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.2
Indicates the status of the port. up(1) means the port is physically up, down(2) means the port is physically down, shutdown(3) means the interface is shutdown because of excessive link flaps or link errors.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), shutdown(3)  

alaLinkMonStatsCurrentLinkFlaps 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.3
Indicates the number of Link flaps in the current time window.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alaLinkMonStatsCurrentErrorFrames 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.4
Indicates the number of error frames in the current time window.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alaLinkMonStatsCurrentCRCErrors 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.5
Indicates the number of CRC errors in the current time window.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alaLinkMonStatsCurrentLostFrames 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.6
Indicates the number of Rx Lost frames in the current time window.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alaLinkMonStatsCurrentAlignErrors 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.7
Indicates the number of Rx alignment frames in the current time window.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alaLinkMonStatsCurrentLinkErrors 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.8
Indicates the sum of all the MAC Errors within the current time window. i.e., the sum of alaLinkMonStatsCurrentErrorFrames, alaLinkMonStatsCurrentCRCErrors, alaLinkMonCurrentLosFrames, alaLinkMonStatsCurrentAlignErrors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alaLinkMonStatsTotalLinkFlaps 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.9
Indicates the total number of link flaps across all the time windows.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alaLinkMonStatsTotalLinkErrors 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.10
Indicates the total number of link errors across all the time windows.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

alaLFPGroupTable 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.4
A list of Link Fault Propagation Grooups and their status
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaLFPGroupEntry

alaLFPGroupEntry 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.4.1
The list of Link Fault Propagation group id and status for each group
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaLFPGroupEntry  

alaLFPGroupId 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.4.1.1
Indicates the unique group id for Link Fault Propagation (LFP).
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32 1..8  

alaLFPGroupAdminStatus 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.4.1.2
Indicates the admin status of the group. disable(2) means link fault propagation, is disbaled. enable(1) means link fault propagation is enabled
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaLFPGroupOperStatus 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.4.1.3
Indicates the operational status of the group. down(2) means all the source ports are down, up(1) means atleast one source port in the group is up.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

alaLFPGroupWaitToShutdown 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.4.1.4
0 - Disable wait to shutdown timer 5 - 300 - after expiry of this timer all destination ports will be shutdown
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..300  

alaLFPGroupRowStatus 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.4.1.5
Row Status for initiating a MIB retrieval request.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

alaLFPConfigTable 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.5
A list of Link Fault Propagation port and port type of each LFP group
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaLFPConfigEntry

alaLFPConfigEntry 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.5.1
A list of Link Fault Propagation port and port type of each LFP group
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaLFPConfigEntry  

alaLFPConfigPort 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.5.1.1
Indicates ifindex of source/destination port for a LFP Group.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InterfaceIndex  

alaLFPConfigPortType 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.5.1.2
Indicates the type of port, (1) means the port is destination port and (2) means the port is a destination port for a LFP Group.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER destination(1), source(2)  

alaLFPConfigRowStatus 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.5.1.3
Row Status for initiating a MIB retrieval request.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

portViolationTrap 1.3.6.1.4.1.6486.801.1.2.1.5.1.0.7
A Trap will be generated when a port violation occurs. The port violation trap will indicate the source of the violation and the reason for the violation.
Status: current Access: read-create
NOTIFICATION-TYPE    

portViolationNotificationTrap 1.3.6.1.4.1.6486.801.1.2.1.5.1.0.8
A Trap will be generated when a port violation is cleared.
Status: current Access: read-create
NOTIFICATION-TYPE    

alaDyingGaspTrap 1.3.6.1.4.1.6486.801.1.2.1.5.1.0.9
Dying Gasp trap.
Status: current Access: read-create
NOTIFICATION-TYPE    

alcatelIND1PortMIBCompliances 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.1
OBJECT IDENTIFIER    

alcatelIND1PortMIBGroups 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2
OBJECT IDENTIFIER    

esmConfPortCompliance 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.1.1
The compliance statement for the configuration of Ethernet ports.
Status: current Access: read-create
MODULE-COMPLIANCE    

alcEtherStatsCompliance 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.1.2
The compliance statement for the Statistics of the Ethernet ports.
Status: current Access: read-create
MODULE-COMPLIANCE    

esmConfMIBGroup 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.1
A collection of objects to support the management of global configuration parameters of the Ethernet ports.
Status: current Access: read-create
OBJECT-GROUP    

esmDetectedConfMIBGroup 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.2
A collection of objects to support the Detected configuration parameters of the Ethernet ports.
Status: current Access: read-create
OBJECT-GROUP    

alcEtherStatsMIBGroup 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.3
A collection of objects to provide all the statistics related to the Ethernet and GigaEthernert ports.
Status: current Access: read-create
OBJECT-GROUP    

alcPortNotificationGroup 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.4
The Port MIB Notification Group.
Status: current Access: read-create
NOTIFICATION-GROUP    

ddmInfoGroup 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.6
A collection of objects to provide digital diagnostics information related to SFPs, XFPs, and SFP+s.
Status: current Access: read-create
OBJECT-GROUP    

ddmConfigGroup 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.7
A collection of objects to allow configuration of DDM and DDM traps.
Status: current Access: read-create
OBJECT-GROUP    

ddmNotificationsGroup 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.8
A collection of notifications used to indicate DDM threshold violations.
Status: current Access: read-create
NOTIFICATION-GROUP    

esmConfTrapGroup 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.9
Partitioned port (separated due to errors).
Status: current Access: read-create
OBJECT-GROUP    

esmHybridConfEntryGroup 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.10
A list of inactive hybrid port instances.
Status: current Access: read-create
OBJECT-GROUP    

esmConfEntryGroup 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.11
A list of ESM Physical Port instances.
Status: current Access: read-create
OBJECT-GROUP    

portViolationEntryGroup 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.12
This table contains the port Violations per port.
Status: current Access: read-create
OBJECT-GROUP    

ddmPortInfoGroup 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.13
A collection of objects to provide digital diagnostics information related to SFPs, XFPs, and SFP+s.
Status: current Access: read-create
OBJECT-GROUP    

alaLinkMonConfigMIBGroup 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.14
A collection of objects to support the Link Monitoring Configurations on the ports.
Status: current Access: read-create
OBJECT-GROUP    

alaLinkMonStatsMIBGroup 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.15
A collection of objects to provide all the statistics related to the Link Monitoring on the ports.
Status: current Access: read-create
OBJECT-GROUP    

alaLFPGroupMIBGroup 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.16
A collection of objects to configure Link Fault Propagation Group, Wait to shutdown timer and admin staus of group.
Status: current Access: read-create
OBJECT-GROUP    

alaLFPConfigMIBGroup 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.17
A collection of objects to configure a port and port type for a Link Fault Propagation Group.
Status: current Access: read-create
OBJECT-GROUP    

csmConfTrapGroup 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.18
A collection of objects for chassis supervision traps
Status: current Access: read-create
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor