ALCATEL-IND1-DRCTM-MIB
File:
ALCATEL-IND1-DRCTM-MIB.mib (89225 bytes)
Imported modules
Imported symbols
Defined Values
alcatelIND1DrcTmMIB |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1 |
This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
This proprietary MIB contains management information for
the configuration of the Task Manager's global configuration
parameters.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE |
MODULE-IDENTITY |
|
|
|
alaDrcTmConfig |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.1 |
OBJECT IDENTIFIER |
|
|
|
alaDrcTmDebug |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.2 |
OBJECT IDENTIFIER |
|
|
|
alaDrcTmIPRouterId |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.1.2 |
Defines the Router-id for this Router. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
alaDrcTmIPRipStatus |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.1.3 |
Controls the load status of RIP on this router.
Loaded(1) is the only valid Set value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
loaded(1), notloaded(2), loading(3) |
|
alaDrcTmIPOspfStatus |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.1.4 |
Controls the load status of OSPF on this router.
Loaded(1) is the only valid Set value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
loaded(1), notloaded(2), loading(3) |
|
alaDrcTmIPBgpStatus |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.1.5 |
Controls the load status of BGP on this router.
Loaded(1) is the only valid Set value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
loaded(1), notloaded(2), loading(3) |
|
alaDrcTmIPDvmrpStatus |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.1.6 |
Controls the load status of DVMRP on this router.
Loaded(1) is the only valid Set value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
loaded(1), notloaded(2), loading(3) |
|
alaDrcTmIPPimStatus |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.1.7 |
Controls the load status of PIM on this router.
Loaded(1) is the only valid Set value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
loaded(1), notloaded(2), loading(3) |
|
alaDrcTmIPMsdpStatus |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.1.8 |
Controls the load status of MSDP on this router.
Loaded(1) is the only valid Set value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
loaded(1), notloaded(2), loading(3) |
|
alaDrcTmIPRipngStatus |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.1.9 |
Controls the load status of Ripng on this router.
Loaded(1) is the only valid Set value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
loaded(1), notloaded(2), loading(3) |
|
alaDrcTmIPOspf3Status |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.1.10 |
Controls the load status of OSPFv3 on this router.
Loaded(1) is the only valid Set value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
loaded(1), notloaded(2), loading(3) |
|
alaDrcTmIPIsisStatus |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.1.11 |
Controls the load status of ISIS on this router.
Loaded(1) is the only valid Set value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
loaded(1), notloaded(2), loading(3) |
|
alaDrcTmLogToSysFacility |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.12.1 |
Logs the DRC log messages to one of the System's Facility |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
printf(1), session(2), swLog(3), sysTrace(4), sysLog(5), truncBuffer(6), ringBuffer(7) |
|
alaDrcTmLogToSessionId |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.12.2 |
Session Id of Switch's telnet/ssh session where DRC log messages
shall be logged.
Default is console. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..65535 |
|
alaDrcTmLogBufferSize |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.12.3 |
Size of the Buffer in Kbytes where DRC log messages shall be logged. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..10000 |
|
alaDrcTmLogBufferDumpfile |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.12.4 |
Redirect/Dump Log Buffer to the specified File.
If filename is left null, Buffer is dumped to Console. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..32) |
|
alaDrcTmLogCriticalBufferDumpfile |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.12.5 |
Redirect/Dump Critical Ring Buffer to the specified File.
If filename is left null, Buffer is dumped to Console. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..32) |
|
alaDrcTmLogShowTask |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.12.6 |
enables/disables showing of Task Names in DRC log
messages. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaDrcTmLogShowFunction |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.12.7 |
enables/disables showing of Function Names in DRC log
messages. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaDrcTmLogShowLine |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.12.8 |
enables/disables showing of Line Numbers in DRC log
messages. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaDrcTmLogShowDate |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.12.9 |
enables/disables showing of Date in TimeStamp of DRC log
messages. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaDrcTmLogShowTime |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.12.10 |
enables/disables showing of Seconds in TimeStamp of DRC log
messages. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaDrcTmLogClearBuffer |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.12.11 |
clears the buffer/critical buffer contents |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
buffer(1), criticalbuffer(2) |
|
alaDrcTmDebugLevel |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.2.1 |
Sets the level of Debugging for the DRC TM on
this router. A level of 0 indicates no debugging.
This object is currently not used |
Status: obsolete |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmDebugError |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.2.2 |
Sets the debug level for DRC TM Error messages |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmDebugUnusedA |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.2.3 |
Sets the debug level for UnusedA messages |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmDebugTaskInfo |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.2.4 |
Sets the debug level for DRC TM Task Info messages |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmDebugEvents |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.2.5 |
Sets the debug level for DRC TM Event messages |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmDebugMip |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.2.6 |
Sets the debug level for DRC TM MIP processing (including CLI/SNMP) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmDebugUnusedB |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.2.7 |
Sets the debug level for UnusedB messages |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmDebugMisc |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.2.8 |
Sets the debug level for Misc DRC TM messages |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmDebugUnused1 |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.2.9 |
Sets the debug level for Unused1 messages |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmDebugUnused2 |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.2.10 |
Sets the debug level for Unused2 messages |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmDebugUnused3 |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.2.11 |
Sets the debug level for Unused3 messages |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmDebugUnused4 |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.2.12 |
Sets the debug level for Unused4 messages |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmDebugAll |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.2.13 |
Sets the debug level for debugging of all DRC TM messages |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspfDebugError |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.1 |
Sets the level of Debugging for the OSPF Error Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspfDebugWarning |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.2 |
Sets the level of Debugging for the OSPF Warning Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspfDebugState |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.3 |
Sets the level of Debugging for the OSPF-State Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspfDebugRecv |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.4 |
Sets the level of Debug messages for the Packets received by OSPF
on this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspfDebugSend |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.5 |
Sets the level of Debug messages for the Packets sent by OSPF from
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspfDebugFlood |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.6 |
Sets the level of Debug messages for the flooding of LSAs in OSPF
on this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspfDebugSPF |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.7 |
Sets the level of Debug messages for the OSPF's SPF calculations on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspfDebugLsdb |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.8 |
Sets the level of Debug messages for the OSPF's LSDB-related operations
on this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspfDebugRdb |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.9 |
Sets the level of Debug messages for the OSPF's RDB-relate operation on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspfDebugAge |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.10 |
Sets the level of Debug messages for the OSPF's Aging process of LSA's on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspfDebugVlink |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.11 |
Sets the level of Debug messages for the OSPF's virtual linkoperations on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspfDebugRedist |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.12 |
Sets the level of Debug messages for the OSPF's route redistribution process
on this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspfDebugSummary |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.13 |
Sets the level of Debug messages for the OSPF's all summarizations on this
router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspfDebugDbexch |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.14 |
Sets the level of Debug messages for the OSPF's Neighbors' database exchange
on this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspfDebugHello |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.15 |
Sets the level of Debug messages for the OSPF's hello handshaking process on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspfDebugAuth |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.16 |
Sets the level of Debug messages for the OSPF's authentication process on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspfDebugArea |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.17 |
Sets the level of Debug messages for the OSPF's area events on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspfDebugIntf |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.18 |
Sets the level of Debug messages for the OSPF's interface operations on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspfDebugMip |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.19 |
Sets the level of Debug messages for the MIP processing of OSPF's specific commands
on this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspfDebugInfo |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.20 |
Sets the level of Debug messages for the OSPF's Information on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspfDebugSetup |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.21 |
Sets the level of Debug messages for the OSPF's Initialization setup on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspfDebugTime |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.22 |
Sets the level of Debug messages for the OSPF's Time related events on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspfDebugTm |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.23 |
Sets the level of Debug messages for the OSPF's Task Manager communication events
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspfDebugRestart |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.24 |
Sets the level of Debug messages for debugging of
OSPF Graceful Restart events and information. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspfDebugHelper |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.25 |
Sets the level of Debug messages for debugging of
OSPF Graceful Restart Helper mode events and information. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspfDebugAll |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.26 |
Sets the level of Debugging for all types of OSPF debug messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmBgpDebugDamp |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.1 |
Sets the level of Debugging for the BGP Damp Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmBgpDebugFsm |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.2 |
Sets the level of Debugging for the BGP FSM Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmBgpDebugRecvUpd |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.3 |
Sets the level of Debugging for the BGP route update messages
received from the neighbor. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmBgpDebugSendUpd |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.4 |
Sets the level of Debugging for the BGP route update messages
sent to the neighbor. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmBgpDebugOpen |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.5 |
Sets the level of Debugging for the BGP Open messages exchanged with
the neighbor. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmBgpDebugKeepAlive |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.6 |
Sets the level of Debugging for the BGP KeepAlive messages exchanged
with the neighbor. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmBgpDebugNotify |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.7 |
Sets the level of Debugging for the BGP Notify Messages exchanged with
the neighbor. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmBgpDebugPolicy |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.8 |
Sets the level of Debugging for the BGP policy Messages exchanged with
the neighbor. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmBgpDebugRoute |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.9 |
Sets the level of Debugging for the BGP Route messages on this router.
A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmBgpDebugSync |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.10 |
Sets the level of Debugging for the BGP Synchronization messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmBgpDebugAggr |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.11 |
Sets the level of Debugging for the BGP Aggregation related messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmBgpDebugTcp |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.12 |
Sets the level of Debugging for the BGP tcp connection messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmBgpDebugWarnings |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.13 |
Sets the level of Debugging for the BGP Warning messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmBgpDebugErrors |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.14 |
Sets the level of Debugging for the BGP Error messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmBgpDebugRedist |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.15 |
Sets the level of Debugging for the BGP Redistribute messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmBgpDebugPeer |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.16 |
Sets the level of Debugging for the BGP peer messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmBgpDebugLocal |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.17 |
Sets the level of Debugging for the BGP local messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmBgpDebugMip |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.18 |
Sets the level of Debugging for the BGP MIP messages (including
CLI/SNMP) on this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmBgpDebugTm |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.19 |
Sets the level of Debugging for the BGP and Task Manager Interaction
messages on this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmBgpDebugInfo |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.20 |
Sets the level of Debugging for the BGP Information messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmBgpDebugRestart |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.21 |
Sets the level of Debugging for the BGP Graceful Restart messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmBgpDebugAll |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.22 |
Sets the level of Debugging for all types of BGP debug messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmBgpDebugPeer6 |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.23 |
Sets the level of Debugging for the BGP IPv6 Peer messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmBgpDebugRoute6 |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.24 |
Sets the level of Debugging for BGP IPv6 route messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmRipDebugError |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.3.1 |
Sets the level of Debugging for the RIP Error Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmRipDebugWarning |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.3.2 |
Sets the level of Debugging for the RIP Warning Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmRipDebugRecv |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.3.3 |
Sets the level of Debug messages for the Packets received by RIP
on this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmRipDebugSend |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.3.4 |
Sets the level of Debug messages for the Packets sent by RIP from
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmRipDebugRdb |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.3.5 |
Sets the level of Debug messages for the RIP's Routing Database on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmRipDebugAge |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.3.6 |
Sets the level of Debug messages for the RIP's Aging messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmRipDebugConfig |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.3.7 |
Sets the level of Debug messages for the RIP's Configuration messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmRipDebugRedist |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.3.8 |
Sets the level of Debug messages for the RIP's route redistribution messages
on this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmRipDebugInfo |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.3.9 |
Sets the level of Debug messages for the RIP's Information on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmRipDebugSetup |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.3.10 |
Sets the level of Debug messages for the RIP's Initialization setup on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmRipDebugTime |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.3.11 |
Sets the level of Debug messages for the RIP's Time related events on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmRipDebugAll |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.3.12 |
Sets the level of Debugging for all types of RIP debug messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIpmrmDebugError |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.10.1 |
Sets the level of Debugging for the IPMRM Error Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIpmrmDebugFib |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.10.2 |
Sets the level of Debug messages for the IPMRM FIB processing on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIpmrmDebugAging |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.10.3 |
Sets the level of Debug messages for the IPMRM's Aging messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIpmrmDebugProtos |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.10.4 |
Sets the level of Debug messages for the IPMRM's protos processing on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIpmrmDebugIpms |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.10.5 |
Sets the level of Debug messages for the IPMRM/IPMS processing
on this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIpmrmDebugMip |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.10.6 |
Sets the level of Debug messages for the IPMRM's MIP processing (including CLI/SNMP)
on this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIpmrmDebugInit |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.10.7 |
Sets the level of Debug messages for the IPMRM's Initialization setup on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIpmrmDebugTm |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.10.8 |
Sets the level of Debug messages for the IPMRM and Task managerinteraction on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIpmrmDebugMisc |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.10.9 |
Sets the level of Debug messages for the IPMRM's Miscellaneous messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIpmrmDebugAll |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.10.10 |
Sets the level of Debugging for all types of IPMRM debug messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIprmDebugError |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.9.1 |
Sets the level of Debugging for the IPRM Error Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIprmDebugAccesslist |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.9.2 |
Sets the level of Debugging for IPRM AccessList handling on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIprmDebugIntf |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.9.3 |
Sets the level of Debugging for IPRM Interface handling
on this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIprmDebugMip |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.9.4 |
Sets the level of Debug messages for the IPRM's MIP processing (including CLI/SNMP)
on this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIprmDebugMisc |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.9.5 |
Sets the level of Debugging for Miscellaneous IPRM issues.
A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIprmDebugNhs |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.9.6 |
Sets the level of Debugging for IPRM's NextHopSync handling
on this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIprmDebugPrefix |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.9.7 |
Sets the level of Debugging for IPRM's Prefix registration code
on this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIprmDebugRedist |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.9.8 |
Sets the level of Debugging for IPRM's Redistribution code
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIprmDebugRoute4 |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.9.9 |
Sets the level of Debugging for IPRM's handling of IPv4 routes
on this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIprmDebugRoute6 |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.9.10 |
Sets the level of Debugging for IPRM's handling of IPv6 routes
on this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIprmDebugRoutemap |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.9.11 |
Sets the level of Debugging for IPRM's RouteMap handling
on this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIprmDebugRoutepref |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.9.12 |
Sets the level of Debugging for IPRM's RoutePreference code
on this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIprmDebugStatic |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.9.13 |
Sets the level of Debugging for IPRM's Static route handling
on this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIprmDebugAll |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.9.14 |
Sets the level of Debugging for all types of IPRM debug messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIprmDebugBfd |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.9.15 |
Sets the level of Debugging for IPRM's BFD support on this
router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmRipngDebugError |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.8.1 |
Sets the level of Debugging for the RIPng Error Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmRipngDebugWarning |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.8.2 |
Sets the level of Debugging for the RIPng Warning Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmRipngDebugRecv |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.8.3 |
Sets the level of Debug messages for the Packets received by RIPng
on this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmRipngDebugSend |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.8.4 |
Sets the level of Debug messages for the Packets sent by RIPng from
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmRipngDebugRdb |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.8.5 |
Sets the level of Debug messages for the RIPng's Routing Database on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmRipngDebugAge |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.8.6 |
Sets the level of Debug messages for the RIPng's Aging messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmRipngDebugMip |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.8.7 |
Sets the level of Debug messages for the RIPng's MIP messages
on this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmRipngDebugInfo |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.8.8 |
Sets the level of Debug messages for the RIPng's Information on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmRipngDebugSetup |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.8.9 |
Sets the level of Debug messages for the RIPng's Initialization setup on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmRipngDebugTime |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.8.10 |
Sets the level of Debug messages for the RIPng's Timer related events on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmRipngDebugTm |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.8.11 |
Sets the level of Debug messages for the RIPng/Task Manager Interaction
messages on this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmRipngDebugRouteFilter |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.8.12 |
Sets the level of Debug messages for the RIPng's Route Filter messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmRipngDebugNexthopFilter |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.8.13 |
Sets the level of Debug messages for the RIPng's Nexthop Filter messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmRipngDebugSummary |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.8.14 |
Sets the level of Debug messages for the RIPng's Summarization messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmRipngDebugAll |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.8.15 |
Sets the level of Debugging for all types of RIPng debug messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmRipngDebugRedist |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.8.16 |
Sets the level of Debugging for RIPng redistribution messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmPimDebugError |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.1 |
Sets the level of Debugging for the PIM Error Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmPimDebugMip |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.2 |
Sets the level of Debug messages for the PIM's MIP processing
(including CLI/SNMP) on this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmPimDebugInit |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.3 |
Sets the level of Debug messages for the PIM's Initialization setup on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmPimDebugBootstrap |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.4 |
Sets the level of Debug messages for PIMSM bootstrap messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmPimDebugCRP |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.5 |
Sets the level of Debug messages for PIMSM CRP processing on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmPimDebugTime |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.6 |
Sets the level of Debug messages for the PIMSM's Timer related events on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmPimDebugSpt |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.7 |
Sets the level of Debug messages for the PIMSM's SPT related events on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmPimDebugSmNbr |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.8 |
Sets the level of Debugging for the PIMSM Neighbor processing on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmPimDebugSmHello |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.9 |
Sets the level of Debugging for the PIMSM Hello Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmPimDebugSmRoute |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.10 |
Sets the level of Debug messages for the PIMSM's Route Processing on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmPimDebugSmJoinPrune |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.11 |
Sets the level of Debug messages for the PIMSM Join/Prune processing on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmPimDebugSmAssert |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.12 |
Sets the level of Debug messages for the PIMSM's Assert processing on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmPimDebugSmIgmp |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.13 |
Sets the level of Debug messages for the PIMSM Igmp processing on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmPimDebugSmIpmrm |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.14 |
Sets the level of Debug messages for the PIMSM IPMRM Interaction on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmPimDebugSmMisc |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.15 |
Sets the level of Debug messages for the PIMSM's Miscellaneous
processing on this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmPimDebugDmNbr |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.16 |
Sets the level of Debugging for the PIMDM Neighbor processing on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmPimDebugDmHello |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.17 |
Sets the level of Debugging for the PIMDM Hello Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmPimDebugDmRoute |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.18 |
Sets the level of Debug messages for the PIMDM's Route Processing on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmPimDebugDmJoinPrune |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.19 |
Sets the level of Debug messages for the PIMDM Join/Prune processing on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmPimDebugDmAssert |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.20 |
Sets the level of Debug messages for the PIMDM's Assert processing on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmPimDebugDmIgmp |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.21 |
Sets the level of Debug messages for the PIMDM Igmp processing on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmPimDebugDmIpmrm |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.22 |
Sets the level of Debug messages for the PIMDM IPMRM Interaction on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmPimDebugDmMisc |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.23 |
Sets the level of Debug messages for the PIMDM's Miscellaneous
processing on this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmPimDebugGraft |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.24 |
Sets the level of Debug messages for the PIMDM's Graft processing on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmPimDebugStateRefresh |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.25 |
Sets the level of Debug messages for the PIMDM's State Refresh Processing
on this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmPimDebugAll |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.26 |
Sets the level of Debugging for all types of PIM debug messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmDvmrpDebugError |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.6.1 |
Sets the level of Debugging for the DVMRP Error Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmDvmrpDebugNbr |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.6.2 |
Sets the level of Debugging for the DVMRP Neighbor processing on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmDvmrpDebugRoutes |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.6.3 |
Sets the level of Debug messages for DVMRP Route messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmDvmrpDebugProbes |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.6.4 |
Sets the level of Debug messages for DVMRP Probes processing on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmDvmrpDebugPrunes |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.6.5 |
Sets the level of Debug messages for the DVMRP Prunes Processing on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmDvmrpDebugGrafts |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.6.6 |
Sets the level of Debug messages for the DVMRP Grafts processing on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmDvmrpDebugTime |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.6.7 |
Sets the level of Debug messages for the DVMRP's Timer related events on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmDvmrpDebugIgmp |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.6.8 |
Sets the level of Debug messages for the DVMRP Igmp processing on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmDvmrpDebugFlash |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.6.9 |
Sets the level of Debug messages for the DVMRP's flash processing on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmDvmrpDebugMip |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.6.10 |
Sets the level of Debug messages for the DVMRP's MIP processing
(including CLI/SNMP) on this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmDvmrpDebugInit |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.6.11 |
Sets the level of Debug messages for the DVMRP's Initialization setup on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmDvmrpDebugTm |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.6.12 |
Sets the level of Debug messages for the DVMRP Task Manager Interaction on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmDvmrpDebugIpmrm |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.6.13 |
Sets the level of Debug messages for the DVMRP IPMRM Interaction on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmDvmrpDebugMisc |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.6.14 |
Sets the level of Debug messages for the DVMRP's Miscellaneous on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmDvmrpDebugAll |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.6.15 |
Sets the level of Debugging for all types of DVMRP debug messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspf3DebugError |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.11.1 |
Sets the level of Debugging for the OSPF3 Error Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspf3DebugInfo |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.11.2 |
Sets the level of Debugging for the OSPF3 Info Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspf3DebugIntf |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.11.3 |
Sets the level of Debugging for the OSPF3 Interface Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspf3DebugRecv |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.11.4 |
Sets the level of Debugging for the OSPF3 Recv Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspf3DebugSend |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.11.5 |
Sets the level of Debugging for the OSPF3 Send Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspf3DebugNbr |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.11.6 |
Sets the level of Debugging for the OSPF3 Nbr Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspf3DebugState |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.11.7 |
Sets the level of Debugging for the OSPF3 State Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspf3DebugArea |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.11.8 |
Sets the level of Debugging for the OSPF3 Area Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspf3DebugLsa |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.11.9 |
Sets the level of Debugging for the OSPF3 Lsa Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspf3DebugFlood |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.11.10 |
Sets the level of Debugging for the OSPF3 Flood Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspf3DebugSpf |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.11.11 |
Sets the level of Debugging for the OSPF3 Spf Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspf3DebugRdb |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.11.12 |
Sets the level of Debugging for the OSPF3 Rdb Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspf3DebugVlink |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.11.13 |
Sets the level of Debugging for the OSPF3 Vlink Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspf3DebugMip |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.11.14 |
Sets the level of Debugging for the OSPF3 Mip Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmOspf3DebugAll |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.11.15 |
Sets the level of Debugging for all types of OSPF3 debug messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIsisDebugError |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.13.1 |
Sets the level of Debugging for the ISIS Error Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIsisDebugWarn |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.13.2 |
Sets the level of Debugging for the ISIS Warning Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIsisDebugPkt |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.13.3 |
Sets the level of Debugging for the ISIS Packet Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIsisDebugAdj |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.13.4 |
Sets the level of Debugging for the ISIS Adjacency Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIsisDebugCkt |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.13.5 |
Sets the level of Debugging for the ISIS Circuit Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIsisDebugSpf |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.13.6 |
Sets the level of Debugging for the ISIS Spf Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIsisDebugLsp |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.13.7 |
Sets the level of Debugging for the ISIS Lsp Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIsisDebugFlood |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.13.8 |
Sets the level of Debugging for the ISIS Flood Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIsisDebugIntf |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.13.9 |
Sets the level of Debugging for the ISIS Interface Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIsisDebugIprm |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.13.10 |
Sets the level of Debugging for the ISIS Iprm Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIsisDebugMip |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.13.11 |
Sets the level of Debugging for the ISIS Mip Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIsisDebugMsg |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.13.12 |
Sets the level of Debugging for the ISIS Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIsisDebugLeak |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.13.13 |
Sets the level of Debugging for the ISIS Leak Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIsisDebugSummary |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.13.14 |
Sets the level of Debugging for the ISIS Summary Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIsisDebugRestart |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.13.15 |
Sets the level of Debugging for the ISIS Restart Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmIsisDebugAll |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.13.16 |
Sets the level of Debugging for the All ISIS Messages on
this router. A level of 0 indicates no debugging. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaDrcTmCompliance |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.2.1.1 |
The compliance statement for routers running DRC Task
Manager (TM) and implementing the ALCATEL-IND1-DRCTM MIB. |
Status: current |
Access: read-write |
MODULE-COMPLIANCE |
|
|
|
alaDrcTmConfigMIBGroup |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.2.2.1 |
A collection of objects to support management of DRC
Task Manager. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
alaDrcTmDebugMIBGroup |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.2.2.2 |
A collection of optional objects to provide debugging
support of DRC TM. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
alaDrcTmRipDebugMIBGroup |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.2.2.3 |
A collection of optional objects to provide debugging
support of RIP DRC TM. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
alaDrcTmOspfDebugMIBGroup |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.2.2.4 |
A collection of optional objects to provide debugging
support of OSPF DRC TM. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
alaDrcTmBgpDebugMIBGroup |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.2.2.5 |
A collection of optional objects to provide debugging
support of BGP DRC TM. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
alaDrcTmDvmrpDebugMIBGroup |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.2.2.6 |
A collection of optional objects to provide debugging
support of DVMRP DRC TM. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
alaDrcTmPimDebugMIBGroup |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.2.2.7 |
A collection of optional objects to provide debugging
support of PIM DRC TM. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
alaDrcTmRipngDebugMIBGroup |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.2.2.8 |
A collection of optional objects to provide debugging
support of RIPNG DRC TM. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
alaDrcTmIprmDebugMIBGroup |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.2.2.9 |
A collection of optional objects to provide debugging
support of IPRM DRC TM. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
alaDrcTmIpmrmDebugMIBGroup |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.2.2.10 |
A collection of optional objects to provide debugging
support of IPMRM DRC TM. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
alaDrcTmOspf3DebugMIBGroup |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.2.2.11 |
A collection of optional objects to provide debugging
support of OSPF3 DRC TM. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
alaDrcTmLogDestinationMIBGroup |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.2.2.12 |
A collection of optional objects to provide debugging
support of DRC TM LOG DESTINATION. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
alaDrcTmIsisDebugMIBGroup |
1.3.6.1.4.1.6486.801.1.2.1.10.1.1.2.2.13 |
A collection of optional objects to provide debugging
support of ISIS DRC TM. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|