ALCATEL-IND1-DHL-MIB

File: ALCATEL-IND1-DHL-MIB.mib (20545 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMP-FRAMEWORK-MIB
IF-MIB SNMPv2-CONF ALCATEL-IND1-BASE

Imported symbols

Integer32 MODULE-IDENTITY OBJECT-TYPE
NOTIFICATION-TYPE OBJECT-IDENTITY RowStatus
SnmpAdminString InterfaceIndex MODULE-COMPLIANCE
OBJECT-GROUP NOTIFICATION-GROUP softentIND1DHL

Defined Types

AlaDHLSessionEntry  
SEQUENCE    
  alaDHLSessionIndex Integer32
  alaDHLSessionDescr SnmpAdminString
  alaDHLSessionAdminStatus INTEGER
  alaDHLSessionOperStatus INTEGER
  alaDHLSessionPreemptionTime Integer32
  alaDHLSessionAdminMacFlushing INTEGER
  alaDHLSessionActiveMacFlushing INTEGER
  alaDHLSessionRowStatus RowStatus

AlaDHLLinksEntry  
SEQUENCE    
  alaDHLLinkslinkA InterfaceIndex
  alaDHLLinkslinkB InterfaceIndex
  alaDHLLinkslinkAOperStatus INTEGER
  alaDHLLinkslinkBOperStatus INTEGER
  alaDHLLinksRowStatus RowStatus

AlaDHLVpaEntry  
SEQUENCE    
  alaDHLVpalink InterfaceIndex
  alaDHLVpaVlan Integer32
  alaDHLVpaVlanType INTEGER
  alaDHLVpaActiveLink InterfaceIndex

AlaDHLVlanMapEntry  
SEQUENCE    
  alaDHLVlanMapVlanStart Integer32
  alaDHLVlanMapVlanEnd Integer32
  alaDHLVlanMapRowStatus RowStatus

Defined Values

alcatelIND1DHLMIB 1.3.6.1.4.1.6486.801.1.2.1.65.1
The Dual Homed Link uses two links with a number of VLANs split between them from the common pool of vlans, in such a way that any vlan is not associated with both of the redundant links at the same time to avoid formation of loops and also VLANs are still connected to the core when one link fails. STP is disabled on both the DHL links implicitly.
MODULE-IDENTITY    

alcatelIND1DHLMIBNotifications 1.3.6.1.4.1.6486.801.1.2.1.65.1.0
Branch For DHL Subsystem Notifications.
Status: current Access: read-only
OBJECT-IDENTITY    

alcatelIND1DHLMIBObjects 1.3.6.1.4.1.6486.801.1.2.1.65.1.1
Branch For DHL Subsystem Managed Objects.
Status: current Access: read-only
OBJECT-IDENTITY    

alcatelIND1DHLMIBConformance 1.3.6.1.4.1.6486.801.1.2.1.65.1.2
Branch for DHL Module MIB Subsystem Conformance Information.
Status: current Access: read-only
OBJECT-IDENTITY    

alcatelIND1DHLMIBGroups 1.3.6.1.4.1.6486.801.1.2.1.65.1.2.1
Branch for DHL Module MIB Subsystem Units of Conformance.
Status: current Access: read-only
OBJECT-IDENTITY    

alcatelIND1DHLMIBCompliances 1.3.6.1.4.1.6486.801.1.2.1.65.1.2.2
Branch for DHL Module MIB Subsystem Compliance Statements.
Status: current Access: read-only
OBJECT-IDENTITY    

alaDHLSessionConfig 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.1
OBJECT IDENTIFIER    

alaDHLSessionTable 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.1.1
Defines the DHL control table for providing the capability of performing DHL Active-Active operations.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaDHLSessionEntry

alaDHLSessionEntry 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.1.1.1
An entry in this table containing information of a single DHL (Active-Active) session.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaDHLSessionEntry  

alaDHLSessionIndex 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.1.1.1.1
DHL session Index identify the entries in the table. we are currently supporting one session.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..1000  

alaDHLSessionDescr 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.1.1.1.2
User provided description string for the DHL session.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString  

alaDHLSessionAdminStatus 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.1.1.1.3
Indicates whether the admin state of DHL session is ENBLED or DISABLED.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

alaDHLSessionOperStatus 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.1.1.1.4
Indicates whether the operational state of DHL session is UP or DOWN.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

alaDHLSessionPreemptionTime 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.1.1.1.5
Interval, in seconds, which defines the pre-emption time used for delay in moving back the vlan to their original link.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..600  

alaDHLSessionAdminMacFlushing 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.1.1.1.6
Value for mac-flushing technique used for the specified DHL session.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(1), raw(2), mvrp(3)  

alaDHLSessionActiveMacFlushing 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.1.1.1.7
Operational state of mac-flushing technique used for the specified DHL session.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), raw(2), mvrp(3)  

alaDHLSessionRowStatus 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.1.1.1.8
This object allows entries to be created and deleted in the table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

alaDHLLinksConfig 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.2
OBJECT IDENTIFIER    

alaDHLLinksTable 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.2.1
Defines the DHLG links table for a DHL session. this table allows the capability to add or remove the DHL links from the DHL session.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaDHLLinksEntry

alaDHLLinksEntry 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.2.1.1
An entry in this table, contains information of the configured port/ling-aggs that participate in a DHL session.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaDHLLinksEntry  

alaDHLLinkslinkA 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.2.1.1.1
The physical identification number for DHL linkA. it can be a physical port or a logical port
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

alaDHLLinkslinkB 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.2.1.1.2
The physical identification number for DHL linkB. it can be a physical port or a logical port
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

alaDHLLinkslinkAOperStatus 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.2.1.1.3
This object indicates whether the operational state of DHL linkA is UP or DOWN.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

alaDHLLinkslinkBOperStatus 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.2.1.1.4
Indicates whether the operational state of DHL linkB is UP or DOWN.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

alaDHLLinksRowStatus 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.2.1.1.5
This object allows entries to be created and deleted in the table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

alaDHLVpa 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.3
OBJECT IDENTIFIER    

alaDHLVpaTable 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.3.1
Used to display the vlan membership of the DHL links. this table is also used to display whether a vlan is protected or unprotected and operational on which DHL link.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaDHLVpaEntry

alaDHLVpaEntry 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.3.1.1
An entry in this table, contains VPA information of of each link per DHL session.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaDHLVpaEntry  


alaDHLVpaVlan 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.3.1.1.2
The vlan number where the DHL linkA or linkB is member of it.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..4094  

alaDHLVpaVlanType 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.3.1.1.3
indicates whether the vlan is protected or un protected where one of the DHL link is member of it.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER protectedVlan(1), unprotectedVlan(2)  


alaDHLVlanMap 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.4
OBJECT IDENTIFIER    

alaDHLVlanMapTable 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.4.1
Defines the DHL vlan map for linkB. this indicates the vlans that will be operational on DHL linkB from the common pool of vlans between DHL linkA and linkB and by default the vlans that are not specified by this table are operational on DHL linkA.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaDHLVlanMapEntry

alaDHLVlanMapEntry 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.4.1.1
An entry in this table, contains the vlan-map for linkB in DHL session.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaDHLVlanMapEntry  

alaDHLVlanMapVlanStart 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.4.1.1.1
The VLAN number identifying the first vlan id in the range. And if start and end is same then it will be treated a one vlan id.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..4094  

alaDHLVlanMapVlanEnd 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.4.1.1.2
The VLAN number identifying the end vlan id in the range. And if start and end is same then it will be treated a one vlan id.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..4094  

alaDHLVlanMapRowStatus 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.4.1.1.3
This object allows entries to be created and deleted in the table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

alaDHLTrapsObj 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.5
OBJECT IDENTIFIER    

alaDHLVlanMoveTrap 1.3.6.1.4.1.6486.801.1.2.1.65.1.0.1
When linkA or linkB goes down or becomes up and both the ports are are part of some vlan-map, then this trap is sent to the Management Entity, with the DHL port information.
Status: current Access: read-create
NOTIFICATION-TYPE    

alaDHLSessionID 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.5.1
This object specifies the DHL Session ID for which alaDHLVlanMoveTrap needs to be sent to the Management Entity.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

alaDHLPortFrom 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.5.2
This object specifies the port, either linkA or linkB, from which vlan-mapped vlans have joined to other port due to linkUp or linkDown as specified by alaDHLVlanMoveReason.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InterfaceIndex  

alaDHLPortTo 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.5.3
This object specifies the port, either linkA or linkB, to which vlan-mapped vlans have joined from other port due to linkUp or linkDown as specified by alaDHLVlanMoveReason.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InterfaceIndex  

alaDHLVlanMoveReason 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.5.4
This object specifies the reason for Vlan Movement from one port to another port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER linkUp(1), linkDown(2)  

alcatelIND1DHLMIBCompliance 1.3.6.1.4.1.6486.801.1.2.1.65.1.2.2.1
Compliance statement for DHL.
Status: current Access: accessible-for-notify
MODULE-COMPLIANCE    

alaDHLSessionGroup 1.3.6.1.4.1.6486.801.1.2.1.65.1.2.1.1
Collection of objects for management of a single DHL (Active-Active) session.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

alaDHLLinksGroup 1.3.6.1.4.1.6486.801.1.2.1.65.1.2.1.2
Collection of objects for information of the configured port/ling-aggs that participate in a DHL session.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

alaDHLVpaGroup 1.3.6.1.4.1.6486.801.1.2.1.65.1.2.1.3
Collection of objects providing VPA information of each link per DHL session.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

alaDHLVlanMapGroup 1.3.6.1.4.1.6486.801.1.2.1.65.1.2.1.4
Collection of objects providing the vlan-map for linkB in DHL session.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

alaDHLNotificationObjectGroup 1.3.6.1.4.1.6486.801.1.2.1.65.1.2.1.5
Collection of objects providing the information regarding DHL Trap.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

alaDHLNotificationGroup 1.3.6.1.4.1.6486.801.1.2.1.65.1.2.1.6
Collection of objects for DHL Trap information.
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP