ALANTEC-MIB

File: ALANTEC-MIB.mib (137991 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212

Imported symbols

enterprises IpAddress Counter
DisplayString PhysAddress OBJECT-TYPE

Defined Types

MacAddress  
OCTET STRING Size(6)    

AlSlotEntry  
SEQUENCE    
  alSlotNumber INTEGER
  alSlotCardType INTEGER
  alSlotStatus INTEGER
  alSlotModel DisplayString
  alSlotRevision DisplayString
  alSlotIssue DisplayString
  alSlotDeviation DisplayString
  alSlotSerialNumber DisplayString
  alSlotPower5 INTEGER
  alSlotPower12 INTEGER
  alSlotPower33 INTEGER
  alSlotPowerOther INTEGER

AlVportEntry  
SEQUENCE    
  alVportNumber INTEGER
  alVportSlotNumber INTEGER
  alVportPortNumber INTEGER
  alVportPortType INTEGER
  alVportStatus INTEGER
  alVportControllerType INTEGER

AlSlotVportEntry  
SEQUENCE    
  alSlotVportSlotNumber INTEGER
  alSlotVportPortNumber INTEGER
  alSlotVportNumber INTEGER
  alSlotVportPortType INTEGER
  alSlotVportStatus INTEGER
  alSlotVportControllerType INTEGER

AlPSEntry  
SEQUENCE    
  alPSNumber INTEGER
  alPSStatus INTEGER

AlBridgeEntry  
SEQUENCE    
  alBridgeEntryAddress MacAddress
  alBridgeEntryPort INTEGER
  alBridgeEntryLink INTEGER
  alBridgeEntryRule INTEGER
  alBridgeEntryFlags INTEGER

PortStatsEntry  
SEQUENCE    
  portStatsPort INTEGER
  portStatsPktsIn INTEGER
  portStatsPktsOut INTEGER
  portStatsOctetsIn INTEGER
  portStatsOctetsOut INTEGER
  portStatsMultiCastPktsIn INTEGER
  portStatsMulticastPktsOut INTEGER
  portStatsTableMisses INTEGER
  portStatsRcvBuffErrs INTEGER
  portStatsXmitBuffErrs INTEGER
  portStatsTotalCollisions INTEGER
  portStatsRcvCollisions INTEGER
  portStatsXmitCollisions INTEGER
  portStatsXmitQLen INTEGER
  portStatsPeakUtilization INTEGER
  portStatsCurrUtilization INTEGER
  portStatsLossOfCarrier INTEGER
  portStatsExcessRetries INTEGER

PortToPortEntry  
SEQUENCE    
  alPPSourecPort INTEGER
  alPPDestinationPort INTEGER
  portToPortPackets INTEGER
  portToPortOctets INTEGER

PortConfigEntry  
SEQUENCE    
  portConfigPort INTEGER
  portConfigSrcRule INTEGER
  portConfigDstRule INTEGER
  portConfigBlockLearnedEntries INTEGER

BrTemplateEntry  
SEQUENCE    
  brTemplateNumber INTEGER
  brTemplateOffset INTEGER
  brTemplateMask Counter
  brTemplateComparator Counter
  brTemplateOption INTEGER

BrRuleEntry  
SEQUENCE    
  brRuleNumber INTEGER
  brRuleStatement DisplayString

AlBrRuleToNodeEntry  
SEQUENCE    
  brRuleToNodePort INTEGER
  brRuleToNodeMacAddr PhysAddress
  brRuleToNodeRule INTEGER

AlBrGroupEntry  
SEQUENCE    
  brGroupNumber INTEGER
  brGroupPortsMask INTEGER
  brGroupName OCTET STRING

PortStateEntry  
SEQUENCE    
  portStatePort INTEGER
  portStateDiag INTEGER
  portStateMgmt INTEGER
  portStateStp INTEGER
  portStatePortName DisplayString

LinkStatsEntry  
SEQUENCE    
  linkStatsPort INTEGER
  linkStatsLink INTEGER
  linkStatsPktsIn INTEGER
  linkStatsOctetsIn INTEGER
  linkStatsBMCastPktsIn INTEGER
  linkStatsGiantPkts INTEGER
  linkStatsFrameErrs INTEGER
  linkStatsFCSErrs INTEGER
  linkStatsRcvCollisions INTEGER

LinkControlEntry  
SEQUENCE    
  linkControlPort INTEGER
  linkControlLink INTEGER
  linkControlEnlState INTEGER
  linkControlLinkTest INTEGER
  linkControlPartition INTEGER
  linkControlPolarity INTEGER
  linkControlEnable INTEGER

PortLinkEntry  
SEQUENCE    
  portLinkPort INTEGER
  portLinkType INTEGER

FiberStatsEntry  
SEQUENCE    
  fiberStatsPort INTEGER
  fiberAuiStatus INTEGER
  fiberSecurityViolation INTEGER

PortMonitorEntry  
SEQUENCE    
  portMonSrcPort INTEGER
  portMonDstPort INTEGER
  portMonTrafficType INTEGER

PortMonitorViewEntry  
SEQUENCE    
  portMonViewSrcPort INTEGER
  portMonViewDstPort INTEGER
  portMonViewMonitorPort INTEGER

RipConfigEntry  
SEQUENCE    
  ripConfigPort INTEGER
  ripConfigTalk INTEGER
  ripConfigListen INTEGER
  ripConfigPoison INTEGER
  ripConfigRptStaticRt INTEGER
  ripConfigRptDefaultRt INTEGER
  ripConfigAccptDefaultRt INTEGER

RipAccptFilEntry  
SEQUENCE    
  ripAccptFilNumber INTEGER
  ripAccptFilAddr IpAddress
  ripAccptFilMask IpAddress
  ripAccptFilPort INTEGER

RipReportFilEntry  
SEQUENCE    
  ripReportFilNumber INTEGER
  ripReportFilAddr IpAddress
  ripReportFilMask IpAddress
  ripReportFilPort INTEGER

AlTcpConnEntry  
SEQUENCE    
  alTcpConnId INTEGER
  alTcpConnState INTEGER
  alTcpConnLocalAddress IpAddress
  alTcpConnLocalPort INTEGER
  alTcpConnRemAddress IpAddress
  alTcpConnRemPort INTEGER

TcpFilEntry  
SEQUENCE    
  tcpFilNumber INTEGER
  tcpFilSrcAddr IpAddress
  tcpFilSrcMask IpAddress
  tcpFilProtocol INTEGER
  tcpFilDstPort INTEGER

ArpProxyEntry  
SEQUENCE    
  arpProxyPort INTEGER
  arpProxyEnable INTEGER

IpTemplateEntry  
SEQUENCE    
  ipTemplateNumber INTEGER
  ipTemplateDelete INTEGER
  ipTemplateAction INTEGER
  ipTemplateSrcAddr IpAddress
  ipTemplateSrcMask IpAddress
  ipTemplateDstAddr IpAddress
  ipTemplateDstMask IpAddress
  ipTemplateProtocol INTEGER
  ipTemplateOperator DisplayString
  ipTemplateDstPort INTEGER

IpRuleEntry  
SEQUENCE    
  ipRuleNumber INTEGER
  ipRuleDelete INTEGER
  ipRuleTemplates DisplayString

IpAcsCtrlEntry  
SEQUENCE    
  ipAcsCtrlPort INTEGER
  ipAcsCtrlDelete INTEGER
  ipAcsCtrlSrcRule INTEGER
  ipAcsCtrlDstRule INTEGER

IpFilStatStatsEntry  
SEQUENCE    
  ipFilStatStatsTemplate INTEGER
  ipFilStatStatsInPkts INTEGER
  ipFilStatStatsInBytes INTEGER
  ipFilStatStatsOutPkts INTEGER
  ipFilStatStatsOutBytes INTEGER

IpFilDynStatsEntry  
SEQUENCE    
  ipFilDynStatsTemplate INTEGER
  ipFilDynStatsInPkts INTEGER
  ipFilDynStatsInBytes INTEGER
  ipFilDynStatsOutPkts INTEGER
  ipFilDynStatsOutBytes INTEGER
  ipFilDynStatsClear INTEGER

AlIpInterfaceEntry  
SEQUENCE    
  ipInterfaceNumber INTEGER
  ipInterfaceAddress IpAddress
  ipInterfaceSubnetMask IpAddress
  ipInterfaceMtu INTEGER
  ipInterfaceBroadCast INTEGER
  ipInterfaceState INTEGER
  ipInterfaceCost INTEGER
  ipInterfacePktsIn INTEGER
  ipInterfaceOctetsIn INTEGER
  ipInterfacePktsOut INTEGER
  ipInterfaceOctetsOut INTEGER

AlIpRtCacheEntry  
SEQUENCE    
  ipRtCachePort INTEGER
  ipRtCacheDstAddress IpAddress
  ipRtCacheClear INTEGER

Defined Values

alantec 1.3.6.1.4.1.390
OBJECT IDENTIFIER    

products 1.3.6.1.4.1.390.1
OBJECT IDENTIFIER    

common 1.3.6.1.4.1.390.2
OBJECT IDENTIFIER    

powerhub 1.3.6.1.4.1.390.1.1
OBJECT IDENTIFIER    

powerbits 1.3.6.1.4.1.390.1.2
OBJECT IDENTIFIER    

powerhub7000 1.3.6.1.4.1.390.1.3
OBJECT IDENTIFIER    

alsystem 1.3.6.1.4.1.390.2.1
OBJECT IDENTIFIER    

albridge 1.3.6.1.4.1.390.2.2
OBJECT IDENTIFIER    

almgmt 1.3.6.1.4.1.390.2.3
OBJECT IDENTIFIER    

alrip 1.3.6.1.4.1.390.2.4
OBJECT IDENTIFIER    

altcp 1.3.6.1.4.1.390.2.5
OBJECT IDENTIFIER    

alip 1.3.6.1.4.1.390.2.6
OBJECT IDENTIFIER    

alat 1.3.6.1.4.1.390.2.7
OBJECT IDENTIFIER    

aldecnet 1.3.6.1.4.1.390.2.8
OBJECT IDENTIFIER    

alipx 1.3.6.1.4.1.390.2.9
OBJECT IDENTIFIER    

alsnmp 1.3.6.1.4.1.390.2.10
OBJECT IDENTIFIER    

alchassis 1.3.6.1.4.1.390.1.3.1
OBJECT IDENTIFIER    

alSlotTable 1.3.6.1.4.1.390.1.3.1.1
A table that contains information about each slot in the PowerHub 7000 chassis.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlSlotEntry

alSlotEntry 1.3.6.1.4.1.390.1.3.1.1.1
Information about a specific slot.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AlSlotEntry  

alSlotNumber 1.3.6.1.4.1.390.1.3.1.1.1.1
The slot number for which the following information applies.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alSlotCardType 1.3.6.1.4.1.390.1.3.1.1.1.2
The card type for this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER universal-ethernet(1), utp-4X4(2), utp-4X6(3), fddi-dual-das(4), fddi-single-das(5), utp-16X1(6), utp-13X1(7), fddi-dual-universal(8), fddi-single-universal(9), fddi-concentrator(10), cddi-concentrator(11), fast-thernet(12)  

alSlotStatus 1.3.6.1.4.1.390.1.3.1.1.1.3
The status of the card in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER not-equipped(1), not-present(2)  

alSlotModel 1.3.6.1.4.1.390.1.3.1.1.1.4
The model number for this card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

alSlotRevision 1.3.6.1.4.1.390.1.3.1.1.1.5
The revision number for this card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

alSlotIssue 1.3.6.1.4.1.390.1.3.1.1.1.6
The issue number for this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

alSlotDeviation 1.3.6.1.4.1.390.1.3.1.1.1.7
The deviation for this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

alSlotSerialNumber 1.3.6.1.4.1.390.1.3.1.1.1.8
The serial number of this card this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

alSlotPower5 1.3.6.1.4.1.390.1.3.1.1.1.9
The number of milliamps. of current drawn by this slot at 5 Volts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alSlotPower12 1.3.6.1.4.1.390.1.3.1.1.1.10
The number of milliamps. of current drawn by this slot at 12 Volts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alSlotPower33 1.3.6.1.4.1.390.1.3.1.1.1.11
The number of milliamps. of current drawn by this slot at 3.3 Volts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alSlotPowerOther 1.3.6.1.4.1.390.1.3.1.1.1.12
The number of milliamps. of current drawn by this slot at OTHER voltage.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alVportTable 1.3.6.1.4.1.390.1.3.1.2
A table that contains information about each virtual port in the PowerHub 7000 chassis.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlVportEntry

alVportEntry 1.3.6.1.4.1.390.1.3.1.2.1
Information about a specific virtual port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AlVportEntry  

alVportNumber 1.3.6.1.4.1.390.1.3.1.2.1.1
The virtual port number for which the following information applies.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alVportSlotNumber 1.3.6.1.4.1.390.1.3.1.2.1.2
The slot number for the virtual port number which is identified by the instance of alVportNumber.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alVportPortNumber 1.3.6.1.4.1.390.1.3.1.2.1.3
The physical port number on the slot for a virtual port number which is identified by an instance of alVportNumber.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alVportPortType 1.3.6.1.4.1.390.1.3.1.2.1.4
The port type for the virtual port which is identified by the instance of alVportNumber.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER bnc(1), fiber(2), aui(3), not-stuffed(7)  

alVportStatus 1.3.6.1.4.1.390.1.3.1.2.1.5
The port status for the virtual port which is identified by the instance of alVportNumber.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER bad(1), removed(2)  

alVportControllerType 1.3.6.1.4.1.390.1.3.1.2.1.6
The controller type for the virtual port which is identified by the instance of alVportNumber.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alSlotToVportTable 1.3.6.1.4.1.390.1.3.1.3
A table that contains information about each virtual port in the PowerHub 7000 chassis.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlSlotVportEntry

alSlotVportEntry 1.3.6.1.4.1.390.1.3.1.3.1
Information about a specific virtual port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AlSlotVportEntry  

alSlotVportSlotNumber 1.3.6.1.4.1.390.1.3.1.3.1.1
The slot number for the virtual port number which is identified by the instance of alVportNumber.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alSlotVportPortNumber 1.3.6.1.4.1.390.1.3.1.3.1.2
The physical port number on the slot for a virtual port number which is identified by an instance of alVportNumber.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alSlotVportNumber 1.3.6.1.4.1.390.1.3.1.3.1.3
The virtual port number for which the following information applies.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alSlotVportPortType 1.3.6.1.4.1.390.1.3.1.3.1.4
The port type for the virtual port which is identified by the instance of alVportNumber.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alSlotVportStatus 1.3.6.1.4.1.390.1.3.1.3.1.5
The port status for the virtual port which is identified by the instance of alVportNumber.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alSlotVportControllerType 1.3.6.1.4.1.390.1.3.1.3.1.6
The controller type for the virtual port which is identified by the instance of alVportNumber.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alPSTable 1.3.6.1.4.1.390.1.3.1.4
A table that contains information about each power supply in the PowerHub 7000 chassis.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlPSEntry

alPSEntry 1.3.6.1.4.1.390.1.3.1.4.1
Information about a specific power supply.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AlPSEntry  

alPSNumber 1.3.6.1.4.1.390.1.3.1.4.1.1
The power supply number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alPSStatus 1.3.6.1.4.1.390.1.3.1.4.1.2
The status of the power supply identified by the instance of alPSNumber.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alCpuSlot 1.3.6.1.4.1.390.1.3.1.5
The slot number in which the packet engine resides
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alChassisType 1.3.6.1.4.1.390.2.1.1
The model type of the PowerHub
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER model3100(1), model3200(2), model3300(3), model3500(4), model3401(5), model3402(6), model3403(7), model3404(8), model3405(9), model3406(10), model3407(11), model3410(12), model3411(13), model3412(14), model3420(15), model3421(16), model3422(17), model3423(18), model3424(19), model3425(20), model5001(21), model5002(22), model5003(23), model5004(24), model5005(25), model5006(26)  

alMcpuRtVer 1.3.6.1.4.1.390.2.1.2
Runtime software version of the motherboard CPU; it is an ASCII string that describes the version as well as the date and time the software was released from the factory.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

alMcpuPromVer 1.3.6.1.4.1.390.2.1.3
PROM software version of the motherboard CPU; it is an ASCII string that describes the version as well as the date and time the software was released from the factory.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

alFcpuOneRtVer 1.3.6.1.4.1.390.2.1.4
Runtime software version of F-bus CPU for the first FDDI board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

alFcpuTwoRtVer 1.3.6.1.4.1.390.2.1.5
Runtime software version of F-bus CPU for the second FDDI board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

alFcpuOnePromVer 1.3.6.1.4.1.390.2.1.6
PROM software version of F-bus CPU for the first FDDI board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

alFcpuTwoPromVer 1.3.6.1.4.1.390.2.1.7
PROM software version of F-bus CPU for the second FDDI board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

alRcpuOneRtVer 1.3.6.1.4.1.390.2.1.8
Runtime software version of Ring CPU for the first FDDI board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

alRcpuTwoRtVer 1.3.6.1.4.1.390.2.1.9
Runtime software version of Ring CPU for the second FDDI board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

alRcpuOnePromVer 1.3.6.1.4.1.390.2.1.10
PROM software version of Ring CPU for the first FDDI board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

alRcpuTwoPromVer 1.3.6.1.4.1.390.2.1.11
PROM software version of Ring CPU for the second FDDI board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

alBridgeTable 1.3.6.1.4.1.390.2.2.1
A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlBridgeEntry

alBridgeEntry 1.3.6.1.4.1.390.2.2.1.1
Information about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AlBridgeEntry  

alBridgeEntryAddress 1.3.6.1.4.1.390.2.2.1.1.1
The MAC address for which the bridge has forwarding and/or filtering information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

alBridgeEntryPort 1.3.6.1.4.1.390.2.2.1.1.2
The port number of the port on which a frame having a source address equal to the value of the corresponding instance of alBridgeEntryAddress has been seen.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  


alBridgeEntryRule 1.3.6.1.4.1.390.2.2.1.1.4
The rule number that is applied to packets that are forwarded to or from this address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

alBridgeEntryFlags 1.3.6.1.4.1.390.2.2.1.1.5
The status of this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alBridgeTblClear 1.3.6.1.4.1.390.2.2.2
When set, clears the Bridge table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

alBrFlushCache 1.3.6.1.4.1.390.2.2.3
When set, flushes the cache.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

alPortStatsTable 1.3.6.1.4.1.390.2.2.4
Per port statistics
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortStatsEntry

portStatsEntry 1.3.6.1.4.1.390.2.2.4.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PortStatsEntry  

portStatsPort 1.3.6.1.4.1.390.2.2.4.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portStatsPktsIn 1.3.6.1.4.1.390.2.2.4.1.2
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portStatsPktsOut 1.3.6.1.4.1.390.2.2.4.1.3
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portStatsOctetsIn 1.3.6.1.4.1.390.2.2.4.1.4
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portStatsOctetsOut 1.3.6.1.4.1.390.2.2.4.1.5
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portStatsMultiCastPktsIn 1.3.6.1.4.1.390.2.2.4.1.6
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portStatsMulticastPktsOut 1.3.6.1.4.1.390.2.2.4.1.7
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portStatsTableMisses 1.3.6.1.4.1.390.2.2.4.1.8
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portStatsRcvBuffErrs 1.3.6.1.4.1.390.2.2.4.1.9
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portStatsXmitBuffErrs 1.3.6.1.4.1.390.2.2.4.1.10
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portStatsTotalCollisions 1.3.6.1.4.1.390.2.2.4.1.11
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portStatsRcvCollisions 1.3.6.1.4.1.390.2.2.4.1.12
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portStatsXmitCollisions 1.3.6.1.4.1.390.2.2.4.1.13
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portStatsXmitQLen 1.3.6.1.4.1.390.2.2.4.1.14
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portStatsPeakUtilization 1.3.6.1.4.1.390.2.2.4.1.15
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portStatsCurrUtilization 1.3.6.1.4.1.390.2.2.4.1.16
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portStatsLossOfCarrier 1.3.6.1.4.1.390.2.2.4.1.17
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portStatsExcessRetries 1.3.6.1.4.1.390.2.2.4.1.18
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alBridgeStatsClear 1.3.6.1.4.1.390.2.2.5
When set, clears the statistics for the bridge.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

alBridgePPControl 1.3.6.1.4.1.390.2.2.6
When set to 0 , disables the port to port collection of the stats; when set to 1, enables the port to port stats collection; when set to 2, clears the port to port stats.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), clear(2)  

alPortToPortTable 1.3.6.1.4.1.390.2.2.7
Statistics for port to port traffic.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortToPortEntry

portToPortEntry 1.3.6.1.4.1.390.2.2.7.1
Statistics for port to port traffic
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PortToPortEntry  

alPPSourecPort 1.3.6.1.4.1.390.2.2.7.1.1
Source port number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alPPDestinationPort 1.3.6.1.4.1.390.2.2.7.1.2
Source port number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portToPortPackets 1.3.6.1.4.1.390.2.2.7.1.3
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portToPortOctets 1.3.6.1.4.1.390.2.2.7.1.4
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alPortConfigTable 1.3.6.1.4.1.390.2.2.8
Per port configuration for configuring Source and Destination Rules etc.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortConfigEntry

portConfigEntry 1.3.6.1.4.1.390.2.2.8.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PortConfigEntry  

portConfigPort 1.3.6.1.4.1.390.2.2.8.1.1
The port number for this table entry
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portConfigSrcRule 1.3.6.1.4.1.390.2.2.8.1.2
Source Rule for the port number identified by the instance of portConfigPort
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portConfigDstRule 1.3.6.1.4.1.390.2.2.8.1.3
Destination Rule for the port number identified by the instance of portConfigPort
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portConfigBlockLearnedEntries 1.3.6.1.4.1.390.2.2.8.1.4
When set to True (1), the port identified by the instance of portConfigPort will block the learned entries; if set to False (0) the port will not block the learned entries
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

alBridgeIpBridging 1.3.6.1.4.1.390.2.2.9
When set to enable(1), enables the IP bridging and if set to disable(0), disables the IP bridging.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

alBrTemplateTable 1.3.6.1.4.1.390.2.2.10
Per template information
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrTemplateEntry

brTemplateEntry 1.3.6.1.4.1.390.2.2.10.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrTemplateEntry  

brTemplateNumber 1.3.6.1.4.1.390.2.2.10.1.1
The number of the template with which it is identified.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brTemplateOffset 1.3.6.1.4.1.390.2.2.10.1.2
A displacement, in octets, from the beginning of the packet. This must be a multiple of 4 in the range from 0 to 124 decimal. A value of -1 will delete the entry
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brTemplateMask 1.3.6.1.4.1.390.2.2.10.1.3
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

brTemplateComparator 1.3.6.1.4.1.390.2.2.10.1.4
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

brTemplateOption 1.3.6.1.4.1.390.2.2.10.1.5
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

alBrRuleTable 1.3.6.1.4.1.390.2.2.11
Per rule information
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrRuleEntry

brRuleEntry 1.3.6.1.4.1.390.2.2.11.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrRuleEntry  

brRuleNumber 1.3.6.1.4.1.390.2.2.11.1.1
The number of the rule with which it is identified.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brRuleStatement 1.3.6.1.4.1.390.2.2.11.1.2
Rule statement
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

alBrRuleToNodeTable 1.3.6.1.4.1.390.2.2.12
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlBrRuleToNodeEntry

alBrRuleToNodeEntry 1.3.6.1.4.1.390.2.2.12.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AlBrRuleToNodeEntry  

brRuleToNodePort 1.3.6.1.4.1.390.2.2.12.1.1
The number of the port for which this rule applies
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brRuleToNodeMacAddr 1.3.6.1.4.1.390.2.2.12.1.2
The source MAC address
Status: mandatory Access: read-write
OBJECT-TYPE    
  PhysAddress  

brRuleToNodeRule 1.3.6.1.4.1.390.2.2.12.1.3
The rule number that applies to this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

alBrGroupTable 1.3.6.1.4.1.390.2.2.13
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlBrGroupEntry

alBrGroupEntry 1.3.6.1.4.1.390.2.2.13.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AlBrGroupEntry  

brGroupNumber 1.3.6.1.4.1.390.2.2.13.1.1
The group number by which the group is identified with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brGroupPortsMask 1.3.6.1.4.1.390.2.2.13.1.2
The ports associated with the group number identified by the instance of brGroupNumber.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brGroupName 1.3.6.1.4.1.390.2.2.13.1.3
The name of the group for which this entry applies
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

alBridgeSTPControl 1.3.6.1.4.1.390.2.2.14
When set to 0 , disables the spanning tree. set to 1, enables the spanning tree.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

alPortStateTable 1.3.6.1.4.1.390.2.2.15
Per port state information about spanning tree, dignostics and management.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortStateEntry

portStateEntry 1.3.6.1.4.1.390.2.2.15.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PortStateEntry  

portStatePort 1.3.6.1.4.1.390.2.2.15.1.1
The port number for this table entry
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portStateDiag 1.3.6.1.4.1.390.2.2.15.1.2
The diagnostics state of the port
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portStateMgmt 1.3.6.1.4.1.390.2.2.15.1.3
The management state of the port
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portStateStp 1.3.6.1.4.1.390.2.2.15.1.4
The spanning tree state of the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portStatePortName 1.3.6.1.4.1.390.2.2.15.1.5
The name of this port
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

alLinkStatsCollect 1.3.6.1.4.1.390.2.3.2
When set to enable(1), per link stats collection is enabled; when set to disable(0), the per link stats are not collected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

alLinkStatsClear 1.3.6.1.4.1.390.2.3.3
When set, clears the link stats
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

alLinkStatsTable 1.3.6.1.4.1.390.2.3.4
Per link stats table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LinkStatsEntry

linkStatsEntry 1.3.6.1.4.1.390.2.3.4.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LinkStatsEntry  

linkStatsPort 1.3.6.1.4.1.390.2.3.4.1.1
Port Number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  


linkStatsPktsIn 1.3.6.1.4.1.390.2.3.4.1.3
Pkts In - corresponds to pi
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

linkStatsOctetsIn 1.3.6.1.4.1.390.2.3.4.1.4
Octets In - corresponds to oi
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

linkStatsBMCastPktsIn 1.3.6.1.4.1.390.2.3.4.1.5
Bmcast Pks In - corresponds to bpi
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

linkStatsGiantPkts 1.3.6.1.4.1.390.2.3.4.1.6
Giant Pkts - corresponds to gp
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

linkStatsFrameErrs 1.3.6.1.4.1.390.2.3.4.1.7
Frame Errors - corresponds to fa
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

linkStatsFCSErrs 1.3.6.1.4.1.390.2.3.4.1.8
FCS Errors corresponds to fcs
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

linkStatsRcvCollisions 1.3.6.1.4.1.390.2.3.4.1.9
Receive Collisions- corresponds to rc
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alLinkControlTable 1.3.6.1.4.1.390.2.3.5
Per link stats table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LinkControlEntry

linkControlEntry 1.3.6.1.4.1.390.2.3.5.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LinkControlEntry  

linkControlPort 1.3.6.1.4.1.390.2.3.5.1.1
Port number for this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  


linkControlEnlState 1.3.6.1.4.1.390.2.3.5.1.3
Enable state for the link corresponds to enl option in lkd command.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

linkControlLinkTest 1.3.6.1.4.1.390.2.3.5.1.4
Link test status for the link; corresponds to lt option of the lkd command.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

linkControlPartition 1.3.6.1.4.1.390.2.3.5.1.5
Partitioning state of the link
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

linkControlPolarity 1.3.6.1.4.1.390.2.3.5.1.6
Polarity of the link
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

linkControlEnable 1.3.6.1.4.1.390.2.3.5.1.7
Setting the value of this object to Enable (1), will enable the link and setting to Disable(2), will disable the link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

alPortLinkTable 1.3.6.1.4.1.390.2.3.6
Per port link type
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortLinkEntry

portLinkEntry 1.3.6.1.4.1.390.2.3.6.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PortLinkEntry  

portLinkPort 1.3.6.1.4.1.390.2.3.6.1.1
The port number for which the port type is to be set
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portLinkType 1.3.6.1.4.1.390.2.3.6.1.2
The type of port
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER aui(1), bnc(2), bnct(3), utp(4), fiber(5), unknown(6)  

alFiberStatsTable 1.3.6.1.4.1.390.2.3.7
Per port fiber stats and Fiber Security
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FiberStatsEntry

fiberStatsEntry 1.3.6.1.4.1.390.2.3.7.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FiberStatsEntry  

fiberStatsPort 1.3.6.1.4.1.390.2.3.7.1.1
The fiber port for which the stats are requested or the Fiber violation is set
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fiberAuiStatus 1.3.6.1.4.1.390.2.3.7.1.2
The fiber aui status for the port that is specified by the instance of fiberStatsPort
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fiberSecurityViolation 1.3.6.1.4.1.390.2.3.7.1.3
The fiber port for which the stats are requested or the Fiber violation is set
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER detect(1), ignore(2), clear(3)  

alPortMonitorClose 1.3.6.1.4.1.390.2.3.8
Setting the value to close(1), will turn the port monitoring off.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

alPortMonitorTable 1.3.6.1.4.1.390.2.3.9
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortMonitorEntry

portMonitorEntry 1.3.6.1.4.1.390.2.3.9.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PortMonitorEntry  

portMonSrcPort 1.3.6.1.4.1.390.2.3.9.1.1
The traffic to/from this port will be monitored on the portMonDstPort
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portMonDstPort 1.3.6.1.4.1.390.2.3.9.1.2
The traffic to/from portMonSrcPort will be monitored on this port
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portMonTrafficType 1.3.6.1.4.1.390.2.3.9.1.3
Setting this value to 1, will let the port monitor monitor forwarded traffic; setting to 0 means the forwarded traffic will not be monitored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER forwarded(1), incoming(2), forwardedincoming(3), generated(4), forwardedgenerated(5), incominggenerated(6), all(7)  

alReboot 1.3.6.1.4.1.390.2.3.10
Setting the value to Reboot(1), will reboot the PowerHub.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

alPortMonitorViewTable 1.3.6.1.4.1.390.2.3.11
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortMonitorViewEntry

portMonitorViewEntry 1.3.6.1.4.1.390.2.3.11.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PortMonitorViewEntry  

portMonViewSrcPort 1.3.6.1.4.1.390.2.3.11.1.1
The traffic from this port to the port designated by portMonViewDstPort will be monitored on portMonViewMonitorPort.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portMonViewDstPort 1.3.6.1.4.1.390.2.3.11.1.2
The traffic to this port from the port designated by portMonViewSrcPort will be monitored on portMonViewMonitorPort.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portMonViewMonitorPort 1.3.6.1.4.1.390.2.3.11.1.3
The traffic to portMonViewDstPort from the port designated by portMonViewSrcPort will be monitored on portMonViewMonitorPort.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

alRipConfigTable 1.3.6.1.4.1.390.2.4.1
Per port RIP configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RipConfigEntry

ripConfigEntry 1.3.6.1.4.1.390.2.4.1.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RipConfigEntry  

ripConfigPort 1.3.6.1.4.1.390.2.4.1.1.1
Port number for which the RIP parameters are to be set or viewed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ripConfigTalk 1.3.6.1.4.1.390.2.4.1.1.2
Controls whether the hub generates RIP packets on the port identified by the instance of ripConfigPort.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ripConfigListen 1.3.6.1.4.1.390.2.4.1.1.3
Controls whether the hub processes RIP packets received on the port identified by the instance of ripConfigPort.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ripConfigPoison 1.3.6.1.4.1.390.2.4.1.1.4
Controls what happens when a route goes down. If set to no(0), the hub simply stops reporting the route. If set to yes(1), the hub reports it one more time, but with a metric value of 16, which infinity as far as RIP is concerned. Thus other routers learn immediately that the route is down.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ripConfigRptStaticRt 1.3.6.1.4.1.390.2.4.1.1.5
When RIP packets are generated on the port, controls whether the hub reports the static routes in its route table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ripConfigRptDefaultRt 1.3.6.1.4.1.390.2.4.1.1.6
When RIP packets are generated on the port, controls whether the hub reports the default routes, if any, in ints route table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ripConfigAccptDefaultRt 1.3.6.1.4.1.390.2.4.1.1.7
When RIP packets are received on the port, controls whether the hub accepts(learns) a default route that is reported in a RIP packet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

alRipstatsClear 1.3.6.1.4.1.390.2.4.2
When set, clears the RIP stats
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

alRipStatPktsRcvd 1.3.6.1.4.1.390.2.4.3
Packets Received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alRipStatPktsXmitted 1.3.6.1.4.1.390.2.4.4
Packets Sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alRipStatReqsRcvd 1.3.6.1.4.1.390.2.4.5
Requests Received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alRipStatRespRcvd 1.3.6.1.4.1.390.2.4.6
Responses Received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alRipStatReqsXmitted 1.3.6.1.4.1.390.2.4.7
Requests Sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alRipStatRespXmitted 1.3.6.1.4.1.390.2.4.8
Responses Sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alRipStatRouteTimeOuts 1.3.6.1.4.1.390.2.4.9
Route Timeouts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alRipStatShortPkts 1.3.6.1.4.1.390.2.4.10
Short packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alRipStatBadVer 1.3.6.1.4.1.390.2.4.11
Bad version pkts received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alRipStatBadZeroes 1.3.6.1.4.1.390.2.4.12
Bad zeroes received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alRipStatBadSrcPort 1.3.6.1.4.1.390.2.4.13
Packets with bad Source port received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alRipStatBadSrcIp 1.3.6.1.4.1.390.2.4.14
Packets with bad source IP address received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alRipStatPktsSelf 1.3.6.1.4.1.390.2.4.15
Packets from self received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alRipStatPktsQueued 1.3.6.1.4.1.390.2.4.16
Packets queued.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alRipStatFreeQueue 1.3.6.1.4.1.390.2.4.17
Free entries in the RIP processing queue.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alRipDynPktsRcvd 1.3.6.1.4.1.390.2.4.18
Packets Received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alRipDynPktsXmitted 1.3.6.1.4.1.390.2.4.19
Packets Sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alRipDynReqsRcvd 1.3.6.1.4.1.390.2.4.20
Requests Received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alRipDynRespRcvd 1.3.6.1.4.1.390.2.4.21
Responses Received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alRipDynReqsXmitted 1.3.6.1.4.1.390.2.4.22
Requests Sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alRipDynRespXmitted 1.3.6.1.4.1.390.2.4.23
Responses Sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alRipDynRouteTimeOuts 1.3.6.1.4.1.390.2.4.24
Route Timeouts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alRipDynShortPkts 1.3.6.1.4.1.390.2.4.25
Short packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alRipDynBadVer 1.3.6.1.4.1.390.2.4.26
Bad version pkts received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alRipDynBadZeroes 1.3.6.1.4.1.390.2.4.27
Bad zeroes received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alRipDynBadSrcPort 1.3.6.1.4.1.390.2.4.28
Packets with bad Source port received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alRipDynBadSrcIp 1.3.6.1.4.1.390.2.4.29
Packets with bad source IP address received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alRipDynPktsSelf 1.3.6.1.4.1.390.2.4.30
Packets from self received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alRipDynPktsQueued 1.3.6.1.4.1.390.2.4.31
Packets queued.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alRipDynFreeQueue 1.3.6.1.4.1.390.2.4.32
Free entries in the RIP processing queue.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alRipAccptFilTable 1.3.6.1.4.1.390.2.4.33
RIP Accept filter table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RipAccptFilEntry

ripAccptFilEntry 1.3.6.1.4.1.390.2.4.33.1
RIP Accept filter entry
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RipAccptFilEntry  

ripAccptFilNumber 1.3.6.1.4.1.390.2.4.33.1.1
Filter Number; Range 1-64
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ripAccptFilAddr 1.3.6.1.4.1.390.2.4.33.1.2
Valid network or subnet address
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ripAccptFilMask 1.3.6.1.4.1.390.2.4.33.1.3
Mask
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ripAccptFilPort 1.3.6.1.4.1.390.2.4.33.1.4
Port number on which network should be accepted or not. Range 1-14. CVG This range will change for PH2??
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

alRipReportFilTable 1.3.6.1.4.1.390.2.4.34
RIP Report filter table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RipReportFilEntry

ripReportFilEntry 1.3.6.1.4.1.390.2.4.34.1
RIP Report filter entry
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RipReportFilEntry  

ripReportFilNumber 1.3.6.1.4.1.390.2.4.34.1.1
Filter Number; Range 1-64
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ripReportFilAddr 1.3.6.1.4.1.390.2.4.34.1.2
Valid network or subnet address
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ripReportFilMask 1.3.6.1.4.1.390.2.4.34.1.3
Mask
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ripReportFilPort 1.3.6.1.4.1.390.2.4.34.1.4
Port number on which network should be reported or not. Port number range 1-14 CVG This range will probably change for PH2??.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

alTcpConnIdleTime 1.3.6.1.4.1.390.2.5.1
Time in minutes before sending keep-alives. The range is 5 to 30 minutes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

alTcpKeepAliveInt 1.3.6.1.4.1.390.2.5.2
Time interval in seconds between two successive keep-alive sends. The range is 30 to 240 seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

alTcpDisconnectInt 1.3.6.1.4.1.390.2.5.3
Time interval in seconds, before an idle connection is dropped. This equals to the sum of alTcpConnIdleTime plus eight times the alTcpKeepAliveInt interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alTcpShortSegRcvd 1.3.6.1.4.1.390.2.5.4
Number of short segments received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alTcpStatsClear 1.3.6.1.4.1.390.2.5.5
When set to 1, clears the TCP stats.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

alTcpConnTable 1.3.6.1.4.1.390.2.5.6
A table containing TCP connection-specific information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlTcpConnEntry

alTcpConnEntry 1.3.6.1.4.1.390.2.5.6.1
Information about a particular current TCP connection. An object of this type is transient, in that it ceases to exist when (or soon after) the connection makes the transition to the CLOSED state.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AlTcpConnEntry  

alTcpConnId 1.3.6.1.4.1.390.2.5.6.1.1
The connection Identifier by which a connection is addressed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alTcpConnState 1.3.6.1.4.1.390.2.5.6.1.2
The state of this TCP connection. The only value which may be set by a management station is deleteTCB(12). Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to set this object to any other value. If a management station sets this object to the value deleteTCB(12), then this has the effect of deleting the TCB (as defined in RFC 793) of the corresponding connection on the managed node, resulting in immediate termination of the connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER closed(1), listen(2), synSent(3), synReceived(4), established(5), finWait1(6), finWait2(7), closeWait(8), lastAck(9), closing(10), timeWait(11), deleteTCB(12)  

alTcpConnLocalAddress 1.3.6.1.4.1.390.2.5.6.1.3
The local IP address for this TCP connection. In the case of a connection in the listen state which is willing to accept connections for any IP interface associated with the node, the value 0.0.0.0 is used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

alTcpConnLocalPort 1.3.6.1.4.1.390.2.5.6.1.4
The local port number for this TCP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alTcpConnRemAddress 1.3.6.1.4.1.390.2.5.6.1.5
The remote IP address for this TCP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

alTcpConnRemPort 1.3.6.1.4.1.390.2.5.6.1.6
The remote port number for this TCP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alTcpFilTable 1.3.6.1.4.1.390.2.5.7
TCP filter table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TcpFilEntry

tcpFilEntry 1.3.6.1.4.1.390.2.5.7.1
TCP filter entry
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TcpFilEntry  

tcpFilNumber 1.3.6.1.4.1.390.2.5.7.1.1
Filter Number; Range 1-32
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

tcpFilSrcAddr 1.3.6.1.4.1.390.2.5.7.1.2
Source address
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

tcpFilSrcMask 1.3.6.1.4.1.390.2.5.7.1.3
Mask
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

tcpFilProtocol 1.3.6.1.4.1.390.2.5.7.1.4
tcp(1) or udp(2)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

tcpFilDstPort 1.3.6.1.4.1.390.2.5.7.1.5
smtp(1000), telnet(2000), ftp(3000) or valid port Number
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

alArpTableClear 1.3.6.1.4.1.390.2.6.1
When set, clears the ARP table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

alArpAge 1.3.6.1.4.1.390.2.6.2
Timeout in minutes for aging ARP entries; when set to zero, set-arpage is turned off.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

alArpStatReqsRcvd 1.3.6.1.4.1.390.2.6.3
Requests Received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alArpStatRepliesRcvd 1.3.6.1.4.1.390.2.6.4
Replies Received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alArpStatInvalidOpcodes 1.3.6.1.4.1.390.2.6.5
Invalid Opcodes Received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alArpStatRequestsSent 1.3.6.1.4.1.390.2.6.6
Requests Sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alArpStatRepliesSent 1.3.6.1.4.1.390.2.6.7
Replies Sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alArpDynReqsRcvd 1.3.6.1.4.1.390.2.6.8
Requests Received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alArpDynRepliesRcvd 1.3.6.1.4.1.390.2.6.9
Replies Received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alArpDynInvalidOpcodes 1.3.6.1.4.1.390.2.6.10
Invalid Opcodes Received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alArpDynRequestsSent 1.3.6.1.4.1.390.2.6.11
Requests Sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alArpDynRepliesSent 1.3.6.1.4.1.390.2.6.12
Replies Sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alArpProxyTable 1.3.6.1.4.1.390.2.6.13
Per port proxy arp enable/disable
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ArpProxyEntry

arpProxyEntry 1.3.6.1.4.1.390.2.6.13.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ArpProxyEntry  

arpProxyPort 1.3.6.1.4.1.390.2.6.13.1.1
Port Number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arpProxyEnable 1.3.6.1.4.1.390.2.6.13.1.2
If set to Enable(1), enables proxy arp for arp requests received on the port identified by the instance of arpProxyPort. If set to Disable(0), it disables the proxy arp for arp requests received on the ports identified by the instance of arpProxyPort.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

alIpTemplateTable 1.3.6.1.4.1.390.2.6.14
Per template information
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpTemplateEntry

ipTemplateEntry 1.3.6.1.4.1.390.2.6.14.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpTemplateEntry  

ipTemplateNumber 1.3.6.1.4.1.390.2.6.14.1.1
The number of the template with which it is identified.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipTemplateDelete 1.3.6.1.4.1.390.2.6.14.1.2
When set to Delete(1), this entry is deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipTemplateAction 1.3.6.1.4.1.390.2.6.14.1.3
Whether the packet being filtered should be forwarded or blocked
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER forward(1), block(2)  

ipTemplateSrcAddr 1.3.6.1.4.1.390.2.6.14.1.4
The portion of the packet's source address specified by ipTemplateSrcMask is matched with this address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipTemplateSrcMask 1.3.6.1.4.1.390.2.6.14.1.5
Source Mask. The portion specified by this mask is matched with source address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipTemplateDstAddr 1.3.6.1.4.1.390.2.6.14.1.6
The portion of the packet's destination address specified by ipTemplateDstMask is matched with this address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipTemplateDstMask 1.3.6.1.4.1.390.2.6.14.1.7
Destination mask. The portion specified by this mask is matched with destination address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipTemplateProtocol 1.3.6.1.4.1.390.2.6.14.1.8
Determines the type of packets that need to be filtered
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipTemplateOperator 1.3.6.1.4.1.390.2.6.14.1.9
Allowed only if the protocol field is tcp or udp.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

ipTemplateDstPort 1.3.6.1.4.1.390.2.6.14.1.10
This is expressed as either a well-known protocol name or a well-known tcp or udp port number
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

alIpRuleTable 1.3.6.1.4.1.390.2.6.15
Per template information
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpRuleEntry

ipRuleEntry 1.3.6.1.4.1.390.2.6.15.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpRuleEntry  

ipRuleNumber 1.3.6.1.4.1.390.2.6.15.1.1
The number of the rule with which it is identified.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipRuleDelete 1.3.6.1.4.1.390.2.6.15.1.2
If set to 1 the entry is deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipRuleTemplates 1.3.6.1.4.1.390.2.6.15.1.3
The templates associated with the rule identified by the instance of ipRuleNumber.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

ipAcsCtrlTable 1.3.6.1.4.1.390.2.6.16
Per port IP access control filters
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpAcsCtrlEntry

ipAcsCtrlEntry 1.3.6.1.4.1.390.2.6.16.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAcsCtrlEntry  

ipAcsCtrlPort 1.3.6.1.4.1.390.2.6.16.1.1
Port number of the port for which the source and destination access filter apply.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipAcsCtrlDelete 1.3.6.1.4.1.390.2.6.16.1.2
If set to 1, the entry is deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipAcsCtrlSrcRule 1.3.6.1.4.1.390.2.6.16.1.3
Source IP access filter rule
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipAcsCtrlDstRule 1.3.6.1.4.1.390.2.6.16.1.4
Destination IP access filter rule
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipFilStatStatsTable 1.3.6.1.4.1.390.2.6.17
Per template static statistics -- stats from the beginning of the last system reboot.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpFilStatStatsEntry

ipFilStatStatsEntry 1.3.6.1.4.1.390.2.6.17.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpFilStatStatsEntry  

ipFilStatStatsTemplate 1.3.6.1.4.1.390.2.6.17.1.1
The template number for which the stats are displayed
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipFilStatStatsInPkts 1.3.6.1.4.1.390.2.6.17.1.2
The number of packets that matched the template identified by the instance of ipFilStatStatsTemplate. The template has to be a Source template.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipFilStatStatsInBytes 1.3.6.1.4.1.390.2.6.17.1.3
The number of bytes that matched the template identified by the instance of ipFilStatStatsTemplate. The template has to be a Source template.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipFilStatStatsOutPkts 1.3.6.1.4.1.390.2.6.17.1.4
The number of packets that matched the template identified by the instance of ipFilStatStatsTemplate. The template has to be a Destination template.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipFilStatStatsOutBytes 1.3.6.1.4.1.390.2.6.17.1.5
The number of bytes that matched the template identified by the instance of ipFilStatStatsTemplate. The template has to be a Destination template.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipFilDynStatsTable 1.3.6.1.4.1.390.2.6.18
Per template dynamic statistics -- stats from the beginning of the last clear.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpFilDynStatsEntry

ipFilDynStatsEntry 1.3.6.1.4.1.390.2.6.18.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpFilDynStatsEntry  

ipFilDynStatsTemplate 1.3.6.1.4.1.390.2.6.18.1.1
The template number for which the stats are displayed
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipFilDynStatsInPkts 1.3.6.1.4.1.390.2.6.18.1.2
The number of packets that matched the template identified by the instance of ipFilDynStatsTemplate. The template has to be a Source template.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipFilDynStatsInBytes 1.3.6.1.4.1.390.2.6.18.1.3
The number of bytes that matched the template identified by the instance of ipFilDynStatsTemplate. The template has to be a Source template.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipFilDynStatsOutPkts 1.3.6.1.4.1.390.2.6.18.1.4
The number of packets that matched the template identified by the instance of ipFilDynStatsTemplate. The template has to be a Destination template.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipFilDynStatsOutBytes 1.3.6.1.4.1.390.2.6.18.1.5
The number of bytes that matched the template identified by the instance of ipFilDynStatsTemplate. The template has to be a Destination template.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipFilDynStatsClear 1.3.6.1.4.1.390.2.6.18.1.6
Setting the value of 1, it will clear all the stats for the template identified by the instance of ipFilDynStatsTemplate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

alIpInterfaceTable 1.3.6.1.4.1.390.2.6.19
Interface table corresponding to the command - interface-table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlIpInterfaceEntry

alIpInterfaceEntry 1.3.6.1.4.1.390.2.6.19.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AlIpInterfaceEntry  

ipInterfaceNumber 1.3.6.1.4.1.390.2.6.19.1.1
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipInterfaceAddress 1.3.6.1.4.1.390.2.6.19.1.2
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipInterfaceSubnetMask 1.3.6.1.4.1.390.2.6.19.1.3
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipInterfaceMtu 1.3.6.1.4.1.390.2.6.19.1.4
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipInterfaceBroadCast 1.3.6.1.4.1.390.2.6.19.1.5
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipInterfaceState 1.3.6.1.4.1.390.2.6.19.1.6
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipInterfaceCost 1.3.6.1.4.1.390.2.6.19.1.7
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipInterfacePktsIn 1.3.6.1.4.1.390.2.6.19.1.8
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipInterfaceOctetsIn 1.3.6.1.4.1.390.2.6.19.1.9
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipInterfacePktsOut 1.3.6.1.4.1.390.2.6.19.1.10
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipInterfaceOctetsOut 1.3.6.1.4.1.390.2.6.19.1.11
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alIpRtCacheTable 1.3.6.1.4.1.390.2.6.20
IP Route Cache for all ports
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlIpRtCacheEntry

alIpRtCacheEntry 1.3.6.1.4.1.390.2.6.20.1
IP Route cache for each port
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AlIpRtCacheEntry  

ipRtCachePort 1.3.6.1.4.1.390.2.6.20.1.1
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ipRtCacheDstAddress 1.3.6.1.4.1.390.2.6.20.1.2
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipRtCacheClear 1.3.6.1.4.1.390.2.6.20.1.3
Setting this to Clear(1), will clear the routecache for the port and Destination address identified by the instance of ipRtCachePort and ipRtCacheDstAddress.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER