ADTRAN-ATLAS890-FRONTPANEL-MIB

File: ADTRAN-ATLAS890-FRONTPANEL-MIB.mib (12216 bytes)

Imported modules

Imported symbols

Defined Types

AdATLAS890FpnlCLEntry
SEQUENCE
	adATLAS890FpnlCLIndex	INTEGER
	adATLAS890FpnlCLStatus	INTEGER
	adATLAS890FpnlCLOnline	INTEGER
	adATLAS890FpnlCLTest	INTEGER
	adATLAS890FpnlCLLink	INTEGER

AdATLAS890FpnlMLEntry
SEQUENCE
	adATLAS890FpnlMLIndex	INTEGER
	adATLAS890FpnlMLStatus	INTEGER
	adATLAS890FpnlMLOnline	INTEGER
	adATLAS890FpnlMLTest	INTEGER

Defined Values

adtran		1.3.6.1.4.1.664
OBJECT IDENTIFIER

adMgmt		1.3.6.1.4.1.664.2
OBJECT IDENTIFIER

adATLASmg		1.3.6.1.4.1.664.2.154
OBJECT IDENTIFIER

adATLAS890mg		1.3.6.1.4.1.664.2.154.6
OBJECT IDENTIFIER

adATLAS890Fpnl		1.3.6.1.4.1.664.2.154.6.1
OBJECT IDENTIFIER

adATLAS890FpnlLeds		1.3.6.1.4.1.664.2.154.6.1.1
OBJECT IDENTIFIER

adATLAS890FpnlContLeds		1.3.6.1.4.1.664.2.154.6.1.1.1
OBJECT IDENTIFIER

adATLAS890FpnlCLTable		1.3.6.1.4.1.664.2.154.6.1.1.1.1
The Controller LED Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AdATLAS890FpnlCLEntry

adATLAS890FpnlCLEntry		1.3.6.1.4.1.664.2.154.6.1.1.1.1.1
An entry in the Controller LED Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AdATLAS890FpnlCLEntry

adATLAS890FpnlCLIndex		1.3.6.1.4.1.664.2.154.6.1.1.1.1.1.1
This variable indicates which slot is selected on the ATLAS 890 Product. Slot 0 indicates the Active Controller. Slot 18 indicates the standy (redundant) controller. These slot numbers are unrelated to the physical slots A and B.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	clactive(0), clstandby(18)

adATLAS890FpnlCLStatus		1.3.6.1.4.1.664.2.154.6.1.1.1.1.1.2
This variable indicates the status of the controller card located in the slot determined by the CLIndex variable. The choices for this variable are Number State Status ------ ----- ------ 1 OK Green 2 Warning Yellow 3 Error Red 4 Flash. Green Flash. Green 5 Flash. Yellow Flash. Yellow 6 Flash. Red Flash. Red 7 Off Off
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	clstatusok(1), clstatuswarn(2), clstatuserr(3), clstatusflashgreen(4), clstatusflashyellow(5), clstatusflashred(6), clstatusoff(7)

adATLAS890FpnlCLOnline		1.3.6.1.4.1.664.2.154.6.1.1.1.1.1.3
This variable indicates whether the controller card located in the slot determined by the CLIndex is online or offline. The choices for this variable are Number State Status ------ ----- ------ 1 OK Green 2 Warning Yellow 3 Error Red 4 Flash. Green Flash. Green 5 Flash. Yellow Flash. Yellow 6 Flash. Red Flash. Red 7 Off Off
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	clonlineok(1), clonlinewarn(2), clonlineerr(3), clonlineflashgreen(4), clonlineflashyellow(5), clonlineflashred(6), clonlineoff(7)

adATLAS890FpnlCLTest		1.3.6.1.4.1.664.2.154.6.1.1.1.1.1.4
This variable indicates whether the controller card located in the slot determined by the CLIndex is in a test mode or not. The choices for this variable are Number State Status ------ ----- ------ 1 Test in Progress Yellow 2 Flashing Flashing Yellow 3 Off Off
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	clteston(1), cltestflash(2), cltestoff(3)

adATLAS890FpnlCLLink		1.3.6.1.4.1.664.2.154.6.1.1.1.1.1.5
This variable indicates the link status of the controller card located in the slot determined by the CLIndex. The choices for this variable are Number State Status ------ ----- ------ 1 Linked Green 2 Flashing??? Flashing Green 3 Off Off
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	cllinkon(1), cllinkflash(2), cllinkoff(3)

adATLAS890FpnlModLeds		1.3.6.1.4.1.664.2.154.6.1.1.2
OBJECT IDENTIFIER

adATLAS890FpnlMLTable		1.3.6.1.4.1.664.2.154.6.1.1.2.1
The Module LED Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AdATLAS890FpnlMLEntry

adATLAS890FpnlMLEntry		1.3.6.1.4.1.664.2.154.6.1.1.2.1.1
An entry in the Module LED Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AdATLAS890FpnlMLEntry

adATLAS890FpnlMLIndex		1.3.6.1.4.1.664.2.154.6.1.1.2.1.1.1
This variable indicates which slot is selected on the ATLAS Product. The number of this variable is the same as the number of the slot on the ATLAS Product.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adATLAS890FpnlMLStatus		1.3.6.1.4.1.664.2.154.6.1.1.2.1.1.2
This variable indicates the status of the card located in the slot determined by the MLIndex variable. The choices for this variable are Number State Status ------ ----- ------ 1 OK Green 2 Warning Yellow 3 Error Red 4 Flash. Green Flash. Green 5 Flash. Yellow Flash. Yellow 6 Flash. Red Flash. Red 7 Off Off
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	mlstatusok(1), mlstatuswarn(2), mlstatuserr(3), mlstatusflashgreen(4), mlstatusflashyellow(5), mlstatusflashred(6), mlstatusoff(7)

adATLAS890FpnlMLOnline		1.3.6.1.4.1.664.2.154.6.1.1.2.1.1.3
This variable indicates whether the card located in the slot determined by the MLIndex is online or offline. The choices for this variable are Number State Status ------ ----- ------ 1 Online Green 2 Flashing Flashing Green 3 Offline Off
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	mlonlineon(1), mlonlineflash(2), mlonlineoff(3)

adATLAS890FpnlMLTest		1.3.6.1.4.1.664.2.154.6.1.1.2.1.1.4
This variable indicates whether the card located in the slot determined by the MLIndex is in a test mode or not. The choices for this variable are Number State Status ------ ----- ------ 1 Test in Progress Yellow 2 Flashing Flashing Yellow 3 Off Off
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	mlteston(1), mltestflash(2), mltestoff(3)

adATLAS890FpnlSysLeds		1.3.6.1.4.1.664.2.154.6.1.1.3
OBJECT IDENTIFIER

adATLAS890FpnlSysFansLed		1.3.6.1.4.1.664.2.154.6.1.1.3.1
This variable indicates the status of the Fans LED. When the Fans LED changes state, this variable also changes state. The various Fans LED states are: Number State Status ------ ----- ------ 1 OK Green 2 Failure Red 3 Warning Yellow
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	fansok(1), fansalarm(2), fanswarn(3)

adATLAS890FpnlSysAlarm		1.3.6.1.4.1.664.2.154.6.1.1.3.2
This variable indicates the status of the Alarm LED. When the Alarm LED changes state, this variable also changes state. The various Alarm LED states are: Number State Status ------ ----- ------ 1 Alarm Red 2 Warning Flashing Red 3 Off Off
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	sysalarmon(1), sysalarmflash(2), sysalarmoff(3)

adATLAS890FpnlSysACO		1.3.6.1.4.1.664.2.154.6.1.1.3.3
This variable indicates the status of the ACO LED. When the ACO switch is pressed, this LED is lit. The various CSU Test states are: Number State Status ------ ----- ------ 1 Clear Yellow 2 Flash Flashing Yellow 3 Off Off
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	sysacoon(1), sysacoflash(2), sysacooff(3)

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor