ADTRAN-AOS-NETWORK-SYNC-MIB
File:
ADTRAN-AOS-NETWORK-SYNC-MIB.mib (7375 bytes)
Imported modules
Imported symbols
Defined Values
| adGenAOSNetSyncMib |
1.3.6.1.4.1.664.6.10000.53.1.9 |
| The MIB module defines Network Sync configuration information and traps for AdtranOS products. |
| MODULE-IDENTITY |
|
|
|
| adGenAOSNetSyncTrapEnable |
1.3.6.1.4.1.664.5.53.1.9.1.1 |
| This variable indicates whether the system produces
the Network Sync trap. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| adGenAOSNetSyncLTIState |
1.3.6.1.4.1.664.5.53.1.9.2.1 |
| A numerical representation of the chassis's LTI(Loss of Timing Info) state. |
| Status: current |
Access: accessible-for-notify |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
inactive(1), active(2) |
|
| adGenAOSNetSyncClockNumber |
1.3.6.1.4.1.664.5.53.1.9.2.2 |
| A numerical representation of the chassis's Network Sync Clock source. |
| Status: current |
Access: accessible-for-notify |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
primary(1), secondary(2) |
|
| adGenAOSNetSyncClockDefectStatus |
1.3.6.1.4.1.664.5.53.1.9.2.3 |
| This variable indicates the Network Sync clock defect status.
The adGenAOSNetSyncClockDefectStatus is a bit map represented as a
sum, therefore, it can represent multiple defects simultaneously.
Bit 1 which represents no defects must be set if and only if no other
bits are set.
The various bit positions are:
1 NONE No defects
2 LOS Loss of signal
4 EFD Exceeded frequency deviation
8 LO_ESMC Loss of ESMC
16 QL_FAILED Quality level failed |
| Status: current |
Access: accessible-for-notify |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| adGenAOSNetSyncT4SquelchState |
1.3.6.1.4.1.664.5.53.1.9.2.4 |
| A numerical representation of the T4 interface squelch state. |
| Status: current |
Access: accessible-for-notify |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
inactive(1), active(2) |
|
| adGenAOSNetSyncClockDefectTrap |
1.3.6.1.4.1.664.5.53.1.9.0.1 |
| A Network Sync trap signifies a change in clock defect status. |
| Status: current |
Access: accessible-for-notify |
| NOTIFICATION-TYPE |
|
|
|
| adGenAOSNetSyncLTIStateChangeTrap |
1.3.6.1.4.1.664.5.53.1.9.0.2 |
| A Network Sync trap signifies a change in Loss of timing state. |
| Status: current |
Access: accessible-for-notify |
| NOTIFICATION-TYPE |
|
|
|
| adGenAOSNetSyncT4SquelchStateChangeTrap |
1.3.6.1.4.1.664.5.53.1.9.0.3 |
| A Network Sync trap signifies a change in T4 interface squelch state. |
| Status: current |
Access: accessible-for-notify |
| NOTIFICATION-TYPE |
|
|
|
| adGenAOSNetSyncFullCompliance |
1.3.6.1.4.1.664.5.53.99.18.2.1 |
| The compliance statement for SNMP entities which implement
version 2 of the adGenAosNetSync MIB. When this MIB is implemented
with support for read-write, then such an implementation can claim
full compliance. |
| Status: current |
Access: accessible-for-notify |
| MODULE-COMPLIANCE |
|
|
|
| adGenAOSNetSyncTrapCfgGroup |
1.3.6.1.4.1.664.5.53.99.18.1.1 |
| This group contains the objects necessary to enable/disable
NetSync failure traps. |
| Status: current |
Access: accessible-for-notify |
| OBJECT-GROUP |
|
|
|
| adGenAOSNetSyncTrapGroup |
1.3.6.1.4.1.664.5.53.99.18.1.2 |
| The objects necessary to control NetSync notification messages. |
| Status: current |
Access: accessible-for-notify |
| OBJECT-GROUP |
|
|
|
| adGenAOSNetSyncNotificationGroup |
1.3.6.1.4.1.664.5.53.99.18.1.3 |
| Traps which may be used to enhance event driven
management of the chassis's Network Sync. |
| Status: current |
Access: accessible-for-notify |
| NOTIFICATION-GROUP |
|
|
|