ADTRAN-ACTDAXL3-MIB

File: ADTRAN-ACTDAXL3-MIB.mib (181578 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
RFC-1215 RFC1406-MIB ADTRAN-MIB

Imported symbols

enterprises Gauge OBJECT-TYPE
DisplayString TRAP-TYPE dsx1LineIndex
adProdPhysAddress

Defined Types

AdDAX3unit  
SEQUENCE    
  adDAX3chanNumber INTEGER
  adDAX3chanUnit DisplayString
  adDAX3device-2 DisplayString
  adDAX3device-3 DisplayString
  adDAX3device-4 DisplayString
  adDAX3device-5 DisplayString

AdDAX3connEntry  
SEQUENCE    
  adDAXFromPort INTEGER
  adDAXFromChannel INTEGER
  adDAXConnStatus INTEGER
  adDAXToPort INTEGER
  adDAXToChannel INTEGER
  adDAXCircuitType INTEGER
  adDAXTermination INTEGER
  adDAXSgnlState INTEGER
  adDAXTroubleInsert INTEGER
  adDAXTroubleCode DisplayString
  adDAXFromTC INTEGER
  adDAXToTC INTEGER
  adDAXUAC DisplayString
  adDAXZeroCodeSuppress INTEGER
  adDAXlastSetResponse DisplayString

AdDAX3connMapEntry  
SEQUENCE    
  adDAXPort INTEGER
  adDAXChnl1 INTEGER
  adDAXChnl2 INTEGER
  adDAXChnl3 INTEGER
  adDAXChnl4 INTEGER
  adDAXChnl5 INTEGER
  adDAXChnl6 INTEGER
  adDAXChnl7 INTEGER
  adDAXChnl8 INTEGER
  adDAXChnl9 INTEGER
  adDAXChnl10 INTEGER
  adDAXChnl11 INTEGER
  adDAXChnl12 INTEGER
  adDAXChnl13 INTEGER
  adDAXChnl14 INTEGER
  adDAXChnl15 INTEGER
  adDAXChnl16 INTEGER
  adDAXChnl17 INTEGER
  adDAXChnl18 INTEGER
  adDAXChnl19 INTEGER
  adDAXChnl20 INTEGER
  adDAXChnl21 INTEGER
  adDAXChnl22 INTEGER
  adDAXChnl23 INTEGER
  adDAXChnl24 INTEGER

AdDAX3ds1EventEntry  
SEQUENCE    
  adDAX3ds1EventIndex INTEGER
  adDAX3LineStatus INTEGER
  adDAX3LineArm INTEGER
  adDAX3CurrentAlert INTEGER
  adDAX3TotalAlert INTEGER
  adDAX3FarCurrentAlert INTEGER
  adDAX3FarTotalAlert INTEGER
  adDAX3CurrentArm INTEGER
  adDAX3TotalArm INTEGER
  adDAX3FarCurrentArm INTEGER
  adDAX3FarTotalArm INTEGER

AdDAX3CurrentThrsEntry  
SEQUENCE    
  adDAX3CurrentThrsIndex INTEGER
  adDAX3CurrentThrsES INTEGER
  adDAX3CurrentThrsSES INTEGER
  adDAX3CurrentThrsSEFS INTEGER
  adDAX3CurrentThrsUAS INTEGER
  adDAX3CurrentThrsCSS INTEGER
  adDAX3CurrentThrsPCVsf INTEGER
  adDAX3CurrentThrsPCVesf INTEGER
  adDAX3CurrentThrsLES INTEGER
  adDAX3CurrentThrsBES INTEGER
  adDAX3CurrentThrsLCV INTEGER

AdDAX3TotalThrsEntry  
SEQUENCE    
  adDAX3TotalThrsIndex INTEGER
  adDAX3TotalThrsES INTEGER
  adDAX3TotalThrsSES INTEGER
  adDAX3TotalThrsSEFS INTEGER
  adDAX3TotalThrsUAS INTEGER
  adDAX3TotalThrsCSS INTEGER
  adDAX3TotalThrsPCVsf INTEGER
  adDAX3TotalThrsPCVesf INTEGER
  adDAX3TotalThrsLES INTEGER
  adDAX3TotalThrsBES INTEGER
  adDAX3TotalThrsLCV INTEGER

AdDS1DailyIntervalEntry  
SEQUENCE    
  adDS1DailyIntervalIndex INTEGER
  adDS1DailyIntervalNumber INTEGER
  adDS1DailyIntervalValid INTEGER
  adDS1DailyIntervalESs Gauge
  adDS1DailyIntervalSESs Gauge
  adDS1DailyIntervalSEFSs Gauge
  adDS1DailyIntervalUASs Gauge
  adDS1DailyIntervalCSSs Gauge
  adDS1DailyIntervalPCVs Gauge
  adDS1DailyIntervalLESs Gauge
  adDS1DailyIntervalBESs Gauge
  adDS1DailyIntervalDMs Gauge
  adDS1DailyIntervalLCVs Gauge

AdDS1FarEndDailyIntervalEntry  
SEQUENCE    
  adDS1FarEndDailyIntervalIndex INTEGER
  adDS1FarEndDailyIntervalNumber INTEGER
  adDS1FarEndDailyIntervalValid INTEGER
  adDS1FarEndDailyIntervalESs Gauge
  adDS1FarEndDailyIntervalSESs Gauge
  adDS1FarEndDailyIntervalSEFSs Gauge
  adDS1FarEndDailyIntervalUASs Gauge
  adDS1FarEndDailyIntervalCSSs Gauge
  adDS1FarEndDailyIntervalPCVs Gauge
  adDS1FarEndDailyIntervalLESs Gauge
  adDS1FarEndDailyIntervalBESs Gauge
  adDS1FarEndDailyIntervalDMs Gauge
  adDS1FarEndDailyIntervalLCVs Gauge

Defined Values

adtran 1.3.6.1.4.1.664
OBJECT IDENTIFIER    

adProducts 1.3.6.1.4.1.664.1
OBJECT IDENTIFIER    

adACTDAXL3 1.3.6.1.4.1.664.1.9
OBJECT IDENTIFIER    

adMgmt 1.3.6.1.4.1.664.2
OBJECT IDENTIFIER    

adACTDAXL3mg 1.3.6.1.4.1.664.2.9
OBJECT IDENTIFIER    

adDAX3config 1.3.6.1.4.1.664.2.9.2
OBJECT IDENTIFIER    

adDAX3systemEvent 1.3.6.1.4.1.664.2.9.6
OBJECT IDENTIFIER    

adDAX3password 1.3.6.1.4.1.664.2.9.2.1
The password string used for authentication of SNMP messages between Proxy Agent and ACTDAX. Maximum of 12 characters. The factory default is 'PASSWORD'. This password is NOT the same as either the read-only or read/write passwords for the EASYMENU terminal interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

adDAX3deviceAddress 1.3.6.1.4.1.664.2.9.2.2
The device address for this ACTDAX. The device address is used to access the device from the proxy agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adDAX3time 1.3.6.1.4.1.664.2.9.2.3
The current ACTDAX time value. A sequence of ASCII characters encoded as HH:MM:SS. For example, 1:15 pm is 13:15:00.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

adDAX3date 1.3.6.1.4.1.664.2.9.2.4
The current ACTDAX date value. A sequence of ASCII characters encoded as MM/DD/YY. For example, April 28, 1994 is 04/28/94.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

adDAX3resetPM 1.3.6.1.4.1.664.2.9.2.5
Resets Performance Monitor DS1 statistic counters in ACTDAX. Parameter value 1 resets all lines, 2 resets line 1 (DS1-A), 3 resets line 2 (DS1-B).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER resAll(1), resDS1A(2), resDS1B(3)  

adDAX3auditProgCode 1.3.6.1.4.1.664.2.9.2.6
A Get performs an audit of the units Program Code and returns the result as PASS or FAIL.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER romTestPASS(1), romTestFAIL(2)  

adDAX3selfTestAndRestart 1.3.6.1.4.1.664.2.9.2.7
A Set restarts ACTDAX and performs unit self-test. Results of last unit self-test are shown as PASS or FAIL.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER selfTestPASS(1), selfTestFAIL(2)  

adDAX3resetFactoryConfig 1.3.6.1.4.1.664.2.9.2.8
A Set resets ALL provisioning to the factory defaults.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

adDAX3primaryTiming 1.3.6.1.4.1.664.2.9.2.9
The Primary Facility Timing for the ACT 1241 and the ACTDAX. The timing set on the ACT OIU must match the timing set on the ACT DAX. 'localOrExternal' indicates that the ACTDAX is timed either a local free-running oscillator or frequency locked to an external clock signal. 'loopA' indicates that the ACTDAX is frequency locked to the received DS1 A line signal. 'loopB' indicates that the ACTDAX is frequency locked to the received DS1 B line signal.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER localOrExternal(1), loopA(2), loopB(3)  

adDAX3backupTiming 1.3.6.1.4.1.664.2.9.2.10
The Backup Facility Timing for the ACT 1241 and the ACTDAX. The backup timing is only used if the adDAX3primaryTiming is either 'loopA' or 'loopB'. 'local' indicates that if the DS1 line fails, which is the primary timing source, then the ACTDAX will time to a local free-running oscillator. 'loop' indicates that if the DS1 line fails, which is the primary timing source, then the ACTDAX will time to the other DS1 line. If both DS1 lines fail then the ACTDAX will time to a local free-running oscillator.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER local(1), loop(2)  

adDAX3ds1AlineEqlz 1.3.6.1.4.1.664.2.9.2.11
The DS1 Line A transmit pre-equalizer circuitry provisioning for conditioning the T1 output signal for connection to a CSU, other customer premises equipment, or the DSX-1 cross-connect through various cable lengths between 0 and 655 feet. '0-110' indicates 0-110 feet. '110-220' indicates 110-220 feet. '220-330' indicates 220-330 feet. '330-440' indicates 330-440 feet. '440-550' indicates 440-550 feet. '550-655' indicates 550-655 feet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ft000-110(1), ft110-220(2), ft220-330(3), ft330-440(4), ft440-550(5), ft550-655(6)  

adDAX3ds1BlineEqlz 1.3.6.1.4.1.664.2.9.2.12
The DS1 Line B transmit pre-equalizer circuitry provisioning for conditioning the T1 output signal for connection to a CSU, other customer premises equipment, or the DSX-1 cross-connect through various cable lengths between 0 and 655 feet. '0-110' indicates 0-110 feet. '110-220' indicates 110-220 feet. '220-330' indicates 220-330 feet. '330-440' indicates 330-440 feet. '440-550' indicates 440-550 feet. '550-655' indicates 550-655 feet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ft000-110(1), ft110-220(2), ft220-330(3), ft330-440(4), ft440-550(5), ft550-655(6)  

adDAX3ds1Aoperation 1.3.6.1.4.1.664.2.9.2.13
The DS1 Line A Operational Status. 'disabled' turns off the faceplate indicators for DS1 A, disables EASY-MENU alarmsfor DS1 A, and stops data transmission for DS1 A. 'enabled' reverses the effect of 'disabled'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

adDAX3ds1Boperation 1.3.6.1.4.1.664.2.9.2.14
The DS1 Line B Operational Status. 'disabled' turns off the faceplate indicators for DS1 B, disables EASY-MENU alarmsfor DS1 B, and stops data transmission for DS1 B. 'enabled' reverses the effect of 'disabled'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

adDAX3trunkProcessMode 1.3.6.1.4.1.664.2.9.2.15
This item indicates how trunk processing will be initiated towards the channel units in the ACT bank in response to a DS1 alarm. This item changes based on the cross-connect matrix configuration. 'liuA' indicates that all connected digroup channels connected to DS1 Line A and are configured as full transparent connections. For an alarm on DS1 Line A the normal bank facilities for trunk conditioning and CGA code insertion will be used. 'liuB' indicates that all connected digroup channels connected to DS1 Line B and are configured as full transparent connections. For an alarm on DS1 Line B the normal bank facilities for trunk conditioning and CGA code insertion will be used. 'dax' indicates a cross connect matrix configuration other than that for 'liuA' or 'liuB'. The ACT DAX will initiate trunk processing toward all the DS0 channels in the digroup on a channel by channel basis.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER dax(1), liuA(2), liuB(3)  

adDAX3remPortBaudRate 1.3.6.1.4.1.664.2.9.2.16
The ACTDAX Remote Port Baud Rate. Changing the remote port buad rate WILL TERMINATE communications to this device at the current baud rate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER bps1200(1), bps2400(2), bps9600(3), bps19200(4)  

adDAX3remPortProtocol 1.3.6.1.4.1.664.2.9.2.17
The ACTDAX Remote Port Protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER easyMenu(1), snmp-telnet(2)  

adDAX3remPortConnect 1.3.6.1.4.1.664.2.9.2.18
The ACTDAX Remote Port Connection Type. Changing the connection type may disrupt communication to this device. 'direct' indicates a direct connection to the proxy agent. 'dialUp' indicates a dial-Up connection to the proxy agent. The adDAX3phone should be set.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER direct(1), dialUp(2)  

adDAX3phone 1.3.6.1.4.1.664.2.9.2.19
The dialing sequence (phone number) to reach the network manager. Maximum of 35 characters.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

adDAX3mdmInitCmd 1.3.6.1.4.1.664.2.9.2.20
The modem initialization command string. The initialization string will be sent to the modem on unit power-up, before a call is made, and on user command. Maximum of 40 characters. Any control character should be entered as '^' plus the character. The factory default is 'ATE0Q0V1X4&C1&D2S0=1^M'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

adDAX3mdmDialCmd 1.3.6.1.4.1.664.2.9.2.21
The modem dialing command string. The dialing command will be sent to the modem before the phone number. Maximum of 15 characters. The factory default is 'ATDT'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

adDAX3mdmDialCmdSfx 1.3.6.1.4.1.664.2.9.2.22
The modem dialing command suffix. The dialing command suffix will be sent to the modem after the phone number. Maximum of 5 characters. Any control character should be entered as '^' plus the character. The factory default is '^M'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

adDAX3mdmHangUpCmd 1.3.6.1.4.1.664.2.9.2.23
The modem hang-up command. The hang-up command will be sent to the modem to hang-up the line. Maximum of 15 characters. Any control character should be entered as '^' plus the character. The first three characters should be the escape code sequence for the modem. The factory default is '+++ATH^M'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

adDAX3mdmInit 1.3.6.1.4.1.664.2.9.2.24
A Set will send the modem initialization string to the modem connected to the remote port. This WILL DISRUPT communications to this device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

adDAX3daisyChain 1.3.6.1.4.1.664.2.9.2.25
Disable/Enable the Local Rear Panel Port of the ACTDAX for Daisy Chain operation. 'off' indicates that the Local Rear Panel Port will run the EASYMENU terminal interface. 'on' indicates that the Local Rear Panel Port can be connected to the remote port of the next unit downstream from the proxy agent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

adDAX3unitMap 1.3.6.1.4.1.664.2.9.3
The ACT DAX channel configuration table which shows what intelligent devices are active in each channel.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AdDAX3unit

adDAX3unit 1.3.6.1.4.1.664.2.9.3.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AdDAX3unit  

adDAX3chanNumber 1.3.6.1.4.1.664.2.9.3.1.1
The channel number of this table entry
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adDAX3chanUnit 1.3.6.1.4.1.664.2.9.3.1.2
The unit name plugged into this channel slot, for example, DSUDP
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

adDAX3device-2 1.3.6.1.4.1.664.2.9.3.1.3
The device name of the PM loop unit connected to the channel unit, for example, LR-IV
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

adDAX3device-3 1.3.6.1.4.1.664.2.9.3.1.4
The device name of the PM loop unit connected to a secondary loop, for example, DDST-IV
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

adDAX3device-4 1.3.6.1.4.1.664.2.9.3.1.5
The device name of the PM loop unit connected to a secondary loop, for example, DDST-IV
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

adDAX3device-5 1.3.6.1.4.1.664.2.9.3.1.6
The device name of the PM loop unit connected to a secondary loop, for example, DDST-IV
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

adDAX3connTable 1.3.6.1.4.1.664.2.9.4
The ACTDAX cross-connect matrix table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AdDAX3connEntry

adDAX3connEntry 1.3.6.1.4.1.664.2.9.4.1
An entry in the ACTDAX cross-connect matrix table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AdDAX3connEntry  

adDAXFromPort 1.3.6.1.4.1.664.2.9.4.1.1
This object is the identifier of one of the three ports. The ACTDAX serves a a cross-point matrix switch between 72 total DS0 channels distributed in three ports of 24 channels each, and can be configured to cross-connect any of the 72 DS0 channels to any other DS0 channel. The three ports are the DS1 Line A port (a1), the DS1 Line B port (b1), and the channel bank (a0). This object in combination with adDAXFromChannel defines one of the 72 DS0 channels which can be connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER a0(1), a1(2), b1(3)  

adDAXFromChannel 1.3.6.1.4.1.664.2.9.4.1.2
This object is the identifier of one of the 24 channels in the DS1 port identified by adDAXFromPort. For 'a1' or 'b1' this object identifies a time slot in the DS1 stream. For 'a0' this object identifies a physical channel slot in the channel bank.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..24  

adDAXConnStatus 1.3.6.1.4.1.664.2.9.4.1.3
The Connection Status for the channel. 'unmapped' indicates that the channel is not connected. 'connected' indicates that the channel is connected to the channel indicated by adDAXToPort and adDAXToChannel with the attributes defined by the other objects in adDAX3connTable. All connections are two-way connections, therefore any set operation performed will also change the corresponding table entry for which the To channel is the From channel. In short, any connection can be identified by either side of the connection. The From and To designations have no true directional significance but are used to differentiate between the two sides of the circuit for assigning circuit parameters. To channels and circuit parameters can be assigned but will not take affect until this object is set to 'connected'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unmapped(1), connected(2)  

adDAXToPort 1.3.6.1.4.1.664.2.9.4.1.4
The port of the DS0 channel connected to the channel indicated by adDAXFromPort and adDAXFromChannel. The three possible ports are the DS1 Line A port (a1), the DS1 Line B port (b1), and the channel bank (a0).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER a0(1), a1(2), b1(3)  

adDAXToChannel 1.3.6.1.4.1.664.2.9.4.1.5
The channel in adDAXToPort that is connected to the channel indicated by adDAXFromPort and adDAXFromChannel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..24  

adDAXCircuitType 1.3.6.1.4.1.664.2.9.4.1.6
The ciruit type for the connection. The ciruit type will determine the settings for adDAXSgnlState, adDAXTroubleInsert, adDAXTroubleCode, adDAXFromTC, and adDAXToTC. For voice circuit types such as 'fxo-fxs', 'fxo' represents the from channel and 'fxs' represents the to channel. 'fullTransparent' indicates SgnlState=transparent, TroubleInsert=no, FromTC=none, and ToTC=none. 'dataTransparent' indicates SgnlState=transparent, TroubleCode=9Ah, FromTC=none, and ToTC=none. 'dataSW56' indicates SgnlState=2state, TroubleCode=9Ah, FromTC=0000, ToTC=0000. 'voiceTransparent' indicates SgnlState=transparent, TroubleCode=7Fh, FromTC=none, and ToTC=none. 'dpt-dpo' indicates SgnlState=2state, TroubleCode=7Fh, FromTC=0000, ToTC=0011. 'dpo-dpt' indicates SgnlState=2state, TroubleCode=7Fh, FromTC=0011, ToTC=0000. 'fxo-fxs' indicates SgnlState=4state, TroubleCode=7Fh, FromTC=0100, ToTC=1101. 'fxs-fxo' indicates SgnlState=4state, TroubleCode=7Fh, FromTC=1101, ToTC=0100. 'em' indicates SgnlState=2state, TroubleCode=7Fh, FromTC=0011, ToTC=0011. 'plar-d3' indicates SgnlState=2state, TroubleCode=7Fh, FromTC=0000, ToTC=0000. 'plar-d4' indicates SgnlState=2state, TroubleCode=7Fh, FromTC=1111, ToTC=1111.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER fullTransparent(1), dataTransparent(2), dataSW56(3), voiceTransparent(4), dpt-dpo(5), dpo-dpt(6), fxo-fxs(7), fxs-fxo(8), em(9), plar-d3(10), plar-d4(11), user-defined(12)  

adDAXTermination 1.3.6.1.4.1.664.2.9.4.1.7
The termination status of the circuit. Terminating the circuit in one direction is equivalent to not connecting the circuit in that direction. The Unassigned Channel Code will be transmitted in that direction of the circuit instead of circuit data. In addition, if the Trunk Conditioning signaling bit states are defined, then the post 2.5 second trunk conditioning signaling bits will be inserted in that direction.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), fromChnl(2), toChnl(3), bothChnl(4)  

adDAXSgnlState 1.3.6.1.4.1.664.2.9.4.1.8
The signaling state of the circuit. 'transparent' indicates that no signal bit robbing is performed. 'state2' indicates that the A-bit is robbed and inserted in both the A-bit and B-bit positions in the outgoing data stream. 'state4' indicates that both the A-bit and B-bit are robbed and inserted in the outgoing data stream. 'state16' indicates that the A-bit, B-bit, C-bit, and D-bit are robbed and inserted in the outgoing data stream. The 16-state signaling can only be set for connections between the DS1 lines and then only if the DS1 lines are configured for ESF framing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER transparent(1), state2(2), state4(3), state16(4)  

adDAXTroubleInsert 1.3.6.1.4.1.664.2.9.4.1.9
If the source channel's port is in an alarm state, the the Trouble Insertion Code will be inserted toward the DS0 channel in place of the outgoing data. The available options include two common trouble codes, TRB (7f hex) and MOS (9a hex). The Trouble Insertion Code can be set to None to have no Trouble Code inserted and to allow the outgoing data to pass through in alarm conditions. The Trouble Code may also be set to a custom hex value with adACTDAXTroubleCode when this object is set to 'userDefined'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), trb-7f(2), mos-9a(3), userDefined(4)  

adDAXTroubleCode 1.3.6.1.4.1.664.2.9.4.1.10
The Trouble Insertion Code that will be inserted toward a DS0 channel instead of outgoing data when the source channels's port is in an alarm state. The TroubleCode will be the same for both the From and To channels. If adDAXTroubleInsert is set to 'none', then the Trouble Code will show 'N/A'. The Trouble Code should be entered as a two digit hex value, i.e. '9A' for a hex value of 9Ah.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

adDAXFromTC 1.3.6.1.4.1.664.2.9.4.1.11
The trunk conditioning bits that will be inserted in the From channel in place of received signaling bits during an alarm state on the To channel port. The first two bits will be inserted for the A-bit and B-bit, respectively, during the first 2.5 seconds of the alarm. The second two bits will be inserted for the A-bit and B-bit, respectively, after the first 2.5 seconds of the alarm until the alarm clears. For example, if '0110' is chosen, then during the first 2.5 seconds of the alarm the A-bit will be '0' and the B-bit will be '1'. After the first 2.5 seconds the A-bit will be '1' and the B-bit will be '0'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), tc0000(2), tc0001(3), tc0010(4), tc0011(5), tc0100(6), tc0101(7), tc0110(8), tc0111(9), tc1000(10), tc1001(11), tc1010(12), tc1011(13), tc1100(14), tc1101(15), tc1110(16), tc1111(17)  

adDAXToTC 1.3.6.1.4.1.664.2.9.4.1.12
The trunk conditioning bits that will be inserted in the To channel in place of received signaling bits during an alarm state on the From channel port. The first two bits will be inserted for the A-bit and B-bit, respectively, during the first 2.5 seconds of the alarm. The second two bits will be inserted for the A-bit and B-bit, respectively, after the first 2.5 seconds of the alarm until the alarm clears. For example, if '0110' is chosen, then during the first 2.5 seconds of the alarm the A-bit will be '0' and the B-bit will be '1'. After the first 2.5 seconds the A-bit will be '1' and the B-bit will be '0'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), tc0000(2), tc0001(3), tc0010(4), tc0011(5), tc0100(6), tc0101(7), tc0110(8), tc0111(9), tc1000(10), tc1001(11), tc1010(12), tc1011(13), tc1100(14), tc1101(15), tc1110(16), tc1111(17)  

adDAXUAC 1.3.6.1.4.1.664.2.9.4.1.13
The Unassigned Channel Code (UAC) is transmitted towards the From channel when the channel is not not assigned to a connection, or the channel is terminated in a connection. The factory default is Command Mode Idle (FEh). The Unassigned Channel Code should be entered as a two digit hex value, i.e. 'FE' for a hex value of FEh.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

adDAXZeroCodeSuppress 1.3.6.1.4.1.664.2.9.4.1.14
This object indicates if Zero Code Suppression is enabled or disabled for the from channel. If Zero Code Suppression is enabled, zero bytes transmitted from the DS1 interface for this channel will be replaced with the code '00000010'. Zero Code Suppression does not apply to DS0 channels in the 'a0' port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

adDAXlastSetResponse 1.3.6.1.4.1.664.2.9.4.1.15
The response to the last set operation performed on an object in this table. The repsonse indicates either SUCCESS or an explanation of failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

adDAX3connMapTable 1.3.6.1.4.1.664.2.9.5
The ACTDAX cross-connect map table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AdDAX3connMapEntry

adDAX3connMapEntry 1.3.6.1.4.1.664.2.9.5.1
An entry in the ACTDAX cross-connect map table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AdDAX3connMapEntry  

adDAXPort 1.3.6.1.4.1.664.2.9.5.1.1
This object is the identifier of one of the three ports. The ACTDAX serves a a cross-point matrix switch between 72 total DS0 channels distributed in three ports of 24 channels each, and can be configured to cross-connect any of the 72 DS0 channels to any other DS0 channel. The three ports are the DS1 Line A port (a1), the DS1 Line B port (b1), and the channel bank (a0).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER a0(1), a1(2), b1(3)  

adDAXChnl1 1.3.6.1.4.1.664.2.9.5.1.2
The DSO channel connected to channel 1 of adDAXPort.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noConnect(1), a0-01(101), a0-02(102), a0-03(103), a0-04(104), a0-05(105), a0-06(106), a0-07(107), a0-08(108), a0-09(109), a0-10(110), a0-11(111), a0-12(112), a0-13(113), a0-14(114), a0-15(115), a0-16(116), a0-17(117), a0-18(118), a0-19(119), a0-20(120), a0-21(121), a0-22(122), a0-23(123), a0-24(124), a1-01(201), a1-02(202), a1-03(203), a1-04(204), a1-05(205), a1-06(206), a1-07(207), a1-08(208), a1-09(209), a1-10(210), a1-11(211), a1-12(212), a1-13(213), a1-14(214), a1-15(215), a1-16(216), a1-17(217), a1-18(218), a1-19(219), a1-20(220), a1-21(221), a1-22(222), a1-23(223), a1-24(224), b1-01(301), b1-02(302), b1-03(303), b1-04(304), b1-05(305), b1-06(306), b1-07(307), b1-08(308), b1-09(309), b1-10(310), b1-11(311), b1-12(312), b1-13(313), b1-14(314), b1-15(315), b1-16(316), b1-17(317), b1-18(318), b1-19(319), b1-20(320), b1-21(321), b1-22(322), b1-23(323), b1-24(324)  

adDAXChnl2 1.3.6.1.4.1.664.2.9.5.1.3
The DSO channel connected to channel 2 of adDAXPort.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noConnect(1), a0-01(101), a0-02(102), a0-03(103), a0-04(104), a0-05(105), a0-06(106), a0-07(107), a0-08(108), a0-09(109), a0-10(110), a0-11(111), a0-12(112), a0-13(113), a0-14(114), a0-15(115), a0-16(116), a0-17(117), a0-18(118), a0-19(119), a0-20(120), a0-21(121), a0-22(122), a0-23(123), a0-24(124), a1-01(201), a1-02(202), a1-03(203), a1-04(204), a1-05(205), a1-06(206), a1-07(207), a1-08(208), a1-09(209), a1-10(210), a1-11(211), a1-12(212), a1-13(213), a1-14(214), a1-15(215), a1-16(216), a1-17(217), a1-18(218), a1-19(219), a1-20(220), a1-21(221), a1-22(222), a1-23(223), a1-24(224), b1-01(301), b1-02(302), b1-03(303), b1-04(304), b1-05(305), b1-06(306), b1-07(307), b1-08(308), b1-09(309), b1-10(310), b1-11(311), b1-12(312), b1-13(313), b1-14(314), b1-15(315), b1-16(316), b1-17(317), b1-18(318), b1-19(319), b1-20(320), b1-21(321), b1-22(322), b1-23(323), b1-24(324)  

adDAXChnl3 1.3.6.1.4.1.664.2.9.5.1.4
The DSO channel connected to channel 3 of adDAXPort.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noConnect(1), a0-01(101), a0-02(102), a0-03(103), a0-04(104), a0-05(105), a0-06(106), a0-07(107), a0-08(108), a0-09(109), a0-10(110), a0-11(111), a0-12(112), a0-13(113), a0-14(114), a0-15(115), a0-16(116), a0-17(117), a0-18(118), a0-19(119), a0-20(120), a0-21(121), a0-22(122), a0-23(123), a0-24(124), a1-01(201), a1-02(202), a1-03(203), a1-04(204), a1-05(205), a1-06(206), a1-07(207), a1-08(208), a1-09(209), a1-10(210), a1-11(211), a1-12(212), a1-13(213), a1-14(214), a1-15(215), a1-16(216), a1-17(217), a1-18(218), a1-19(219), a1-20(220), a1-21(221), a1-22(222), a1-23(223), a1-24(224), b1-01(301), b1-02(302), b1-03(303), b1-04(304), b1-05(305), b1-06(306), b1-07(307), b1-08(308), b1-09(309), b1-10(310), b1-11(311), b1-12(312), b1-13(313), b1-14(314), b1-15(315), b1-16(316), b1-17(317), b1-18(318), b1-19(319), b1-20(320), b1-21(321), b1-22(322), b1-23(323), b1-24(324)  

adDAXChnl4 1.3.6.1.4.1.664.2.9.5.1.5
The DSO channel connected to channel 4 of adDAXPort.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noConnect(1), a0-01(101), a0-02(102), a0-03(103), a0-04(104), a0-05(105), a0-06(106), a0-07(107), a0-08(108), a0-09(109), a0-10(110), a0-11(111), a0-12(112), a0-13(113), a0-14(114), a0-15(115), a0-16(116), a0-17(117), a0-18(118), a0-19(119), a0-20(120), a0-21(121), a0-22(122), a0-23(123), a0-24(124), a1-01(201), a1-02(202), a1-03(203), a1-04(204), a1-05(205), a1-06(206), a1-07(207), a1-08(208), a1-09(209), a1-10(210), a1-11(211), a1-12(212), a1-13(213), a1-14(214), a1-15(215), a1-16(216), a1-17(217), a1-18(218), a1-19(219), a1-20(220), a1-21(221), a1-22(222), a1-23(223), a1-24(224), b1-01(301), b1-02(302), b1-03(303), b1-04(304), b1-05(305), b1-06(306), b1-07(307), b1-08(308), b1-09(309), b1-10(310), b1-11(311), b1-12(312), b1-13(313), b1-14(314), b1-15(315), b1-16(316), b1-17(317), b1-18(318), b1-19(319), b1-20(320), b1-21(321), b1-22(322), b1-23(323), b1-24(324)  

adDAXChnl5 1.3.6.1.4.1.664.2.9.5.1.6
The DSO channel connected to channel 5 of adDAXPort.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noConnect(1), a0-01(101), a0-02(102), a0-03(103), a0-04(104), a0-05(105), a0-06(106), a0-07(107), a0-08(108), a0-09(109), a0-10(110), a0-11(111), a0-12(112), a0-13(113), a0-14(114), a0-15(115), a0-16(116), a0-17(117), a0-18(118), a0-19(119), a0-20(120), a0-21(121), a0-22(122), a0-23(123), a0-24(124), a1-01(201), a1-02(202), a1-03(203), a1-04(204), a1-05(205), a1-06(206), a1-07(207), a1-08(208), a1-09(209), a1-10(210), a1-11(211), a1-12(212), a1-13(213), a1-14(214), a1-15(215), a1-16(216), a1-17(217), a1-18(218), a1-19(219), a1-20(220), a1-21(221), a1-22(222), a1-23(223), a1-24(224), b1-01(301), b1-02(302), b1-03(303), b1-04(304), b1-05(305), b1-06(306), b1-07(307), b1-08(308), b1-09(309), b1-10(310), b1-11(311), b1-12(312), b1-13(313), b1-14(314), b1-15(315), b1-16(316), b1-17(317), b1-18(318), b1-19(319), b1-20(320), b1-21(321), b1-22(322), b1-23(323), b1-24(324)  

adDAXChnl6 1.3.6.1.4.1.664.2.9.5.1.7
The DSO channel connected to channel 6 of adDAXPort.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noConnect(1), a0-01(101), a0-02(102), a0-03(103), a0-04(104), a0-05(105), a0-06(106), a0-07(107), a0-08(108), a0-09(109), a0-10(110), a0-11(111), a0-12(112), a0-13(113), a0-14(114), a0-15(115), a0-16(116), a0-17(117), a0-18(118), a0-19(119), a0-20(120), a0-21(121), a0-22(122), a0-23(123), a0-24(124), a1-01(201), a1-02(202), a1-03(203), a1-04(204), a1-05(205), a1-06(206), a1-07(207), a1-08(208), a1-09(209), a1-10(210), a1-11(211), a1-12(212), a1-13(213), a1-14(214), a1-15(215), a1-16(216), a1-17(217), a1-18(218), a1-19(219), a1-20(220), a1-21(221), a1-22(222), a1-23(223), a1-24(224), b1-01(301), b1-02(302), b1-03(303), b1-04(304), b1-05(305), b1-06(306), b1-07(307), b1-08(308), b1-09(309), b1-10(310), b1-11(311), b1-12(312), b1-13(313), b1-14(314), b1-15(315), b1-16(316), b1-17(317), b1-18(318), b1-19(319), b1-20(320), b1-21(321), b1-22(322), b1-23(323), b1-24(324)  

adDAXChnl7 1.3.6.1.4.1.664.2.9.5.1.8
The DSO channel connected to channel 7 of adDAXPort.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noConnect(1), a0-01(101), a0-02(102), a0-03(103), a0-04(104), a0-05(105), a0-06(106), a0-07(107), a0-08(108), a0-09(109), a0-10(110), a0-11(111), a0-12(112), a0-13(113), a0-14(114), a0-15(115), a0-16(116), a0-17(117), a0-18(118), a0-19(119), a0-20(120), a0-21(121), a0-22(122), a0-23(123), a0-24(124), a1-01(201), a1-02(202), a1-03(203), a1-04(204), a1-05(205), a1-06(206), a1-07(207), a1-08(208), a1-09(209), a1-10(210), a1-11(211), a1-12(212), a1-13(213), a1-14(214), a1-15(215), a1-16(216), a1-17(217), a1-18(218), a1-19(219), a1-20(220), a1-21(221), a1-22(222), a1-23(223), a1-24(224), b1-01(301), b1-02(302), b1-03(303), b1-04(304), b1-05(305), b1-06(306), b1-07(307), b1-08(308), b1-09(309), b1-10(310), b1-11(311), b1-12(312), b1-13(313), b1-14(314), b1-15(315), b1-16(316), b1-17(317), b1-18(318), b1-19(319), b1-20(320), b1-21(321), b1-22(322), b1-23(323), b1-24(324)  

adDAXChnl8 1.3.6.1.4.1.664.2.9.5.1.9
The DSO channel connected to channel 8 of adDAXPort.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noConnect(1), a0-01(101), a0-02(102), a0-03(103), a0-04(104), a0-05(105), a0-06(106), a0-07(107), a0-08(108), a0-09(109), a0-10(110), a0-11(111), a0-12(112), a0-13(113), a0-14(114), a0-15(115), a0-16(116), a0-17(117), a0-18(118), a0-19(119), a0-20(120), a0-21(121), a0-22(122), a0-23(123), a0-24(124), a1-01(201), a1-02(202), a1-03(203), a1-04(204), a1-05(205), a1-06(206), a1-07(207), a1-08(208), a1-09(209), a1-10(210), a1-11(211), a1-12(212), a1-13(213), a1-14(214), a1-15(215), a1-16(216), a1-17(217), a1-18(218), a1-19(219), a1-20(220), a1-21(221), a1-22(222), a1-23(223), a1-24(224), b1-01(301), b1-02(302), b1-03(303), b1-04(304), b1-05(305), b1-06(306), b1-07(307), b1-08(308), b1-09(309), b1-10(310), b1-11(311), b1-12(312), b1-13(313), b1-14(314), b1-15(315), b1-16(316), b1-17(317), b1-18(318), b1-19(319), b1-20(320), b1-21(321), b1-22(322), b1-23(323), b1-24(324)  

adDAXChnl9 1.3.6.1.4.1.664.2.9.5.1.10
The DSO channel connected to channel 9 of adDAXPort.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noConnect(1), a0-01(101), a0-02(102), a0-03(103), a0-04(104), a0-05(105), a0-06(106), a0-07(107), a0-08(108), a0-09(109), a0-10(110), a0-11(111), a0-12(112), a0-13(113), a0-14(114), a0-15(115), a0-16(116), a0-17(117), a0-18(118), a0-19(119), a0-20(120), a0-21(121), a0-22(122), a0-23(123), a0-24(124), a1-01(201), a1-02(202), a1-03(203), a1-04(204), a1-05(205), a1-06(206), a1-07(207), a1-08(208), a1-09(209), a1-10(210), a1-11(211), a1-12(212), a1-13(213), a1-14(214), a1-15(215), a1-16(216), a1-17(217), a1-18(218), a1-19(219), a1-20(220), a1-21(221), a1-22(222), a1-23(223), a1-24(224), b1-01(301), b1-02(302), b1-03(303), b1-04(304), b1-05(305), b1-06(306), b1-07(307), b1-08(308), b1-09(309), b1-10(310), b1-11(311), b1-12(312), b1-13(313), b1-14(314), b1-15(315), b1-16(316), b1-17(317), b1-18(318), b1-19(319), b1-20(320), b1-21(321), b1-22(322), b1-23(323), b1-24(324)  

adDAXChnl10 1.3.6.1.4.1.664.2.9.5.1.11
The DSO channel connected to channel 10 of adDAXPort.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noConnect(1), a0-01(101), a0-02(102), a0-03(103), a0-04(104), a0-05(105), a0-06(106), a0-07(107), a0-08(108), a0-09(109), a0-10(110), a0-11(111), a0-12(112), a0-13(113), a0-14(114), a0-15(115), a0-16(116), a0-17(117), a0-18(118), a0-19(119), a0-20(120), a0-21(121), a0-22(122), a0-23(123), a0-24(124), a1-01(201), a1-02(202), a1-03(203), a1-04(204), a1-05(205), a1-06(206), a1-07(207), a1-08(208), a1-09(209), a1-10(210), a1-11(211), a1-12(212), a1-13(213), a1-14(214), a1-15(215), a1-16(216), a1-17(217), a1-18(218), a1-19(219), a1-20(220), a1-21(221), a1-22(222), a1-23(223), a1-24(224), b1-01(301), b1-02(302), b1-03(303), b1-04(304), b1-05(305), b1-06(306), b1-07(307), b1-08(308), b1-09(309), b1-10(310), b1-11(311), b1-12(312), b1-13(313), b1-14(314), b1-15(315), b1-16(316), b1-17(317), b1-18(318), b1-19(319), b1-20(320), b1-21(321), b1-22(322), b1-23(323), b1-24(324)  

adDAXChnl11 1.3.6.1.4.1.664.2.9.5.1.12
The DSO channel connected to channel 11 of adDAXPort.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noConnect(1), a0-01(101), a0-02(102), a0-03(103), a0-04(104), a0-05(105), a0-06(106), a0-07(107), a0-08(108), a0-09(109), a0-10(110), a0-11(111), a0-12(112), a0-13(113), a0-14(114), a0-15(115), a0-16(116), a0-17(117), a0-18(118), a0-19(119), a0-20(120), a0-21(121), a0-22(122), a0-23(123), a0-24(124), a1-01(201), a1-02(202), a1-03(203), a1-04(204), a1-05(205), a1-06(206), a1-07(207), a1-08(208), a1-09(209), a1-10(210), a1-11(211), a1-12(212), a1-13(213), a1-14(214), a1-15(215), a1-16(216), a1-17(217), a1-18(218), a1-19(219), a1-20(220), a1-21(221), a1-22(222), a1-23(223), a1-24(224), b1-01(301), b1-02(302), b1-03(303), b1-04(304), b1-05(305), b1-06(306), b1-07(307), b1-08(308), b1-09(309), b1-10(310), b1-11(311), b1-12(312), b1-13(313), b1-14(314), b1-15(315), b1-16(316), b1-17(317), b1-18(318), b1-19(319), b1-20(320), b1-21(321), b1-22(322), b1-23(323), b1-24(324)  

adDAXChnl12 1.3.6.1.4.1.664.2.9.5.1.13
The DSO channel connected to channel 12 of adDAXPort.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noConnect(1), a0-01(101), a0-02(102), a0-03(103), a0-04(104), a0-05(105), a0-06(106), a0-07(107), a0-08(108), a0-09(109), a0-10(110), a0-11(111), a0-12(112), a0-13(113), a0-14(114), a0-15(115), a0-16(116), a0-17(117), a0-18(118), a0-19(119), a0-20(120), a0-21(121), a0-22(122), a0-23(123), a0-24(124), a1-01(201), a1-02(202), a1-03(203), a1-04(204), a1-05(205), a1-06(206), a1-07(207), a1-08(208), a1-09(209), a1-10(210), a1-11(211), a1-12(212), a1-13(213), a1-14(214), a1-15(215), a1-16(216), a1-17(217), a1-18(218), a1-19(219), a1-20(220), a1-21(221), a1-22(222), a1-23(223), a1-24(224), b1-01(301), b1-02(302), b1-03(303), b1-04(304), b1-05(305), b1-06(306), b1-07(307), b1-08(308), b1-09(309), b1-10(310), b1-11(311), b1-12(312), b1-13(313), b1-14(314), b1-15(315), b1-16(316), b1-17(317), b1-18(318), b1-19(319), b1-20(320), b1-21(321), b1-22(322), b1-23(323), b1-24(324)  

adDAXChnl13 1.3.6.1.4.1.664.2.9.5.1.14
The DSO channel connected to channel 13 of adDAXPort.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noConnect(1), a0-01(101), a0-02(102), a0-03(103), a0-04(104), a0-05(105), a0-06(106), a0-07(107), a0-08(108), a0-09(109), a0-10(110), a0-11(111), a0-12(112), a0-13(113), a0-14(114), a0-15(115), a0-16(116), a0-17(117), a0-18(118), a0-19(119), a0-20(120), a0-21(121), a0-22(122), a0-23(123), a0-24(124), a1-01(201), a1-02(202), a1-03(203), a1-04(204), a1-05(205), a1-06(206), a1-07(207), a1-08(208), a1-09(209), a1-10(210), a1-11(211), a1-12(212), a1-13(213), a1-14(214), a1-15(215), a1-16(216), a1-17(217), a1-18(218), a1-19(219), a1-20(220), a1-21(221), a1-22(222), a1-23(223), a1-24(224), b1-01(301), b1-02(302), b1-03(303), b1-04(304), b1-05(305), b1-06(306), b1-07(307), b1-08(308), b1-09(309), b1-10(310), b1-11(311), b1-12(312), b1-13(313), b1-14(314), b1-15(315), b1-16(316), b1-17(317), b1-18(318), b1-19(319), b1-20(320), b1-21(321), b1-22(322), b1-23(323), b1-24(324)  

adDAXChnl14 1.3.6.1.4.1.664.2.9.5.1.15
The DSO channel connected to channel 14 of adDAXPort.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noConnect(1), a0-01(101), a0-02(102), a0-03(103), a0-04(104), a0-05(105), a0-06(106), a0-07(107), a0-08(108), a0-09(109), a0-10(110), a0-11(111), a0-12(112), a0-13(113), a0-14(114), a0-15(115), a0-16(116), a0-17(117), a0-18(118), a0-19(119), a0-20(120), a0-21(121), a0-22(122), a0-23(123), a0-24(124), a1-01(201), a1-02(202), a1-03(203), a1-04(204), a1-05(205), a1-06(206), a1-07(207), a1-08(208), a1-09(209), a1-10(210), a1-11(211), a1-12(212), a1-13(213), a1-14(214), a1-15(215), a1-16(216), a1-17(217), a1-18(218), a1-19(219), a1-20(220), a1-21(221), a1-22(222), a1-23(223), a1-24(224), b1-01(301), b1-02(302), b1-03(303), b1-04(304), b1-05(305), b1-06(306), b1-07(307), b1-08(308), b1-09(309), b1-10(310), b1-11(311), b1-12(312), b1-13(313), b1-14(314), b1-15(315), b1-16(316), b1-17(317), b1-18(318), b1-19(319), b1-20(320), b1-21(321), b1-22(322), b1-23(323), b1-24(324)  

adDAXChnl15 1.3.6.1.4.1.664.2.9.5.1.16
The DSO channel connected to channel 15 of adDAXPort.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noConnect(1), a0-01(101), a0-02(102), a0-03(103), a0-04(104), a0-05(105), a0-06(106), a0-07(107), a0-08(108), a0-09(109), a0-10(110), a0-11(111), a0-12(112), a0-13(113), a0-14(114), a0-15(115), a0-16(116), a0-17(117), a0-18(118), a0-19(119), a0-20(120), a0-21(121), a0-22(122), a0-23(123), a0-24(124), a1-01(201), a1-02(202), a1-03(203), a1-04(204), a1-05(205), a1-06(206), a1-07(207), a1-08(208), a1-09(209), a1-10(210), a1-11(211), a1-12(212), a1-13(213), a1-14(214), a1-15(215), a1-16(216), a1-17(217), a1-18(218), a1-19(219), a1-20(220), a1-21(221), a1-22(222), a1-23(223), a1-24(224), b1-01(301), b1-02(302), b1-03(303), b1-04(304), b1-05(305), b1-06(306), b1-07(307), b1-08(308), b1-09(309), b1-10(310), b1-11(311), b1-12(312), b1-13(313), b1-14(314), b1-15(315), b1-16(316), b1-17(317), b1-18(318), b1-19(319), b1-20(320), b1-21(321), b1-22(322), b1-23(323), b1-24(324)  

adDAXChnl16 1.3.6.1.4.1.664.2.9.5.1.17
The DSO channel connected to channel 16 of adDAXPort.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noConnect(1), a0-01(101), a0-02(102), a0-03(103), a0-04(104), a0-05(105), a0-06(106), a0-07(107), a0-08(108), a0-09(109), a0-10(110), a0-11(111), a0-12(112), a0-13(113), a0-14(114), a0-15(115), a0-16(116), a0-17(117), a0-18(118), a0-19(119), a0-20(120), a0-21(121), a0-22(122), a0-23(123), a0-24(124), a1-01(201), a1-02(202), a1-03(203), a1-04(204), a1-05(205), a1-06(206), a1-07(207), a1-08(208), a1-09(209), a1-10(210), a1-11(211), a1-12(212), a1-13(213), a1-14(214), a1-15(215), a1-16(216), a1-17(217), a1-18(218), a1-19(219), a1-20(220), a1-21(221), a1-22(222), a1-23(223), a1-24(224), b1-01(301), b1-02(302), b1-03(303), b1-04(304), b1-05(305), b1-06(306), b1-07(307), b1-08(308), b1-09(309), b1-10(310), b1-11(311), b1-12(312), b1-13(313), b1-14(314), b1-15(315), b1-16(316), b1-17(317), b1-18(318), b1-19(319), b1-20(320), b1-21(321), b1-22(322), b1-23(323), b1-24(324)  

adDAXChnl17 1.3.6.1.4.1.664.2.9.5.1.18
The DSO channel connected to channel 17 of adDAXPort.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noConnect(1), a0-01(101), a0-02(102), a0-03(103), a0-04(104), a0-05(105), a0-06(106), a0-07(107), a0-08(108), a0-09(109), a0-10(110), a0-11(111), a0-12(112), a0-13(113), a0-14(114), a0-15(115), a0-16(116), a0-17(117), a0-18(118), a0-19(119), a0-20(120), a0-21(121), a0-22(122), a0-23(123), a0-24(124), a1-01(201), a1-02(202), a1-03(203), a1-04(204), a1-05(205), a1-06(206), a1-07(207), a1-08(208), a1-09(209), a1-10(210), a1-11(211), a1-12(212), a1-13(213), a1-14(214), a1-15(215), a1-16(216), a1-17(217), a1-18(218), a1-19(219), a1-20(220), a1-21(221), a1-22(222), a1-23(223), a1-24(224), b1-01(301), b1-02(302), b1-03(303), b1-04(304), b1-05(305), b1-06(306), b1-07(307), b1-08(308), b1-09(309), b1-10(310), b1-11(311), b1-12(312), b1-13(313), b1-14(314), b1-15(315), b1-16(316), b1-17(317), b1-18(318), b1-19(319), b1-20(320), b1-21(321), b1-22(322), b1-23(323), b1-24(324)  

adDAXChnl18 1.3.6.1.4.1.664.2.9.5.1.19
The DSO channel connected to channel 18 of adDAXPort.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noConnect(1), a0-01(101), a0-02(102), a0-03(103), a0-04(104), a0-05(105), a0-06(106), a0-07(107), a0-08(108), a0-09(109), a0-10(110), a0-11(111), a0-12(112), a0-13(113), a0-14(114), a0-15(115), a0-16(116), a0-17(117), a0-18(118), a0-19(119), a0-20(120), a0-21(121), a0-22(122), a0-23(123), a0-24(124), a1-01(201), a1-02(202), a1-03(203), a1-04(204), a1-05(205), a1-06(206), a1-07(207), a1-08(208), a1-09(209), a1-10(210), a1-11(211), a1-12(212), a1-13(213), a1-14(214), a1-15(215), a1-16(216), a1-17(217), a1-18(218), a1-19(219), a1-20(220), a1-21(221), a1-22(222), a1-23(223), a1-24(224), b1-01(301), b1-02(302), b1-03(303), b1-04(304), b1-05(305), b1-06(306), b1-07(307), b1-08(308), b1-09(309), b1-10(310), b1-11(311), b1-12(312), b1-13(313), b1-14(314), b1-15(315), b1-16(316), b1-17(317), b1-18(318), b1-19(319), b1-20(320), b1-21(321), b1-22(322), b1-23(323), b1-24(324)  

adDAXChnl19 1.3.6.1.4.1.664.2.9.5.1.20
The DSO channel connected to channel 19 of adDAXPort.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noConnect(1), a0-01(101), a0-02(102), a0-03(103), a0-04(104), a0-05(105), a0-06(106), a0-07(107), a0-08(108), a0-09(109), a0-10(110), a0-11(111), a0-12(112), a0-13(113), a0-14(114), a0-15(115), a0-16(116), a0-17(117), a0-18(118), a0-19(119), a0-20(120), a0-21(121), a0-22(122), a0-23(123), a0-24(124), a1-01(201), a1-02(202), a1-03(203), a1-04(204), a1-05(205), a1-06(206), a1-07(207), a1-08(208), a1-09(209), a1-10(210), a1-11(211), a1-12(212), a1-13(213), a1-14(214), a1-15(215), a1-16(216), a1-17(217), a1-18(218), a1-19(219), a1-20(220), a1-21(221), a1-22(222), a1-23(223), a1-24(224), b1-01(301), b1-02(302), b1-03(303), b1-04(304), b1-05(305), b1-06(306), b1-07(307), b1-08(308), b1-09(309), b1-10(310), b1-11(311), b1-12(312), b1-13(313), b1-14(314), b1-15(315), b1-16(316), b1-17(317), b1-18(318), b1-19(319), b1-20(320), b1-21(321), b1-22(322), b1-23(323), b1-24(324)  

adDAXChnl20 1.3.6.1.4.1.664.2.9.5.1.21
The DSO channel connected to channel 20 of adDAXPort.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noConnect(1), a0-01(101), a0-02(102), a0-03(103), a0-04(104), a0-05(105), a0-06(106), a0-07(107), a0-08(108), a0-09(109), a0-10(110), a0-11(111), a0-12(112), a0-13(113), a0-14(114), a0-15(115), a0-16(116), a0-17(117), a0-18(118), a0-19(119), a0-20(120), a0-21(121), a0-22(122), a0-23(123), a0-24(124), a1-01(201), a1-02(202), a1-03(203), a1-04(204), a1-05(205), a1-06(206), a1-07(207), a1-08(208), a1-09(209), a1-10(210), a1-11(211), a1-12(212), a1-13(213), a1-14(214), a1-15(215), a1-16(216), a1-17(217), a1-18(218), a1-19(219), a1-20(220), a1-21(221), a1-22(222), a1-23(223), a1-24(224), b1-01(301), b1-02(302), b1-03(303), b1-04(304), b1-05(305), b1-06(306), b1-07(307), b1-08(308), b1-09(309), b1-10(310), b1-11(311), b1-12(312), b1-13(313), b1-14(314), b1-15(315), b1-16(316), b1-17(317), b1-18(318), b1-19(319), b1-20(320), b1-21(321), b1-22(322), b1-23(323), b1-24(324)  

adDAXChnl21 1.3.6.1.4.1.664.2.9.5.1.22
The DSO channel connected to channel 21 of adDAXPort.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noConnect(1), a0-01(101), a0-02(102), a0-03(103), a0-04(104), a0-05(105), a0-06(106), a0-07(107), a0-08(108), a0-09(109), a0-10(110), a0-11(111), a0-12(112), a0-13(113), a0-14(114), a0-15(115), a0-16(116), a0-17(117), a0-18(118), a0-19(119), a0-20(120), a0-21(121), a0-22(122), a0-23(123), a0-24(124), a1-01(201), a1-02(202), a1-03(203), a1-04(204), a1-05(205), a1-06(206), a1-07(207), a1-08(208), a1-09(209), a1-10(210), a1-11(211), a1-12(212), a1-13(213), a1-14(214), a1-15(215), a1-16(216), a1-17(217), a1-18(218), a1-19(219), a1-20(220), a1-21(221), a1-22(222), a1-23(223), a1-24(224), b1-01(301), b1-02(302), b1-03(303), b1-04(304), b1-05(305), b1-06(306), b1-07(307), b1-08(308), b1-09(309), b1-10(310), b1-11(311), b1-12(312), b1-13(313), b1-14(314), b1-15(315), b1-16(316), b1-17(317), b1-18(318), b1-19(319), b1-20(320), b1-21(321), b1-22(322), b1-23(323), b1-24(324)  

adDAXChnl22 1.3.6.1.4.1.664.2.9.5.1.23
The DSO channel connected to channel 22 of adDAXPort.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noConnect(1), a0-01(101), a0-02(102), a0-03(103), a0-04(104), a0-05(105), a0-06(106), a0-07(107), a0-08(108), a0-09(109), a0-10(110), a0-11(111), a0-12(112), a0-13(113), a0-14(114), a0-15(115), a0-16(116), a0-17(117), a0-18(118), a0-19(119), a0-20(120), a0-21(121), a0-22(122), a0-23(123), a0-24(124), a1-01(201), a1-02(202), a1-03(203), a1-04(204), a1-05(205), a1-06(206), a1-07(207), a1-08(208), a1-09(209), a1-10(210), a1-11(211), a1-12(212), a1-13(213), a1-14(214), a1-15(215), a1-16(216), a1-17(217), a1-18(218), a1-19(219), a1-20(220), a1-21(221), a1-22(222), a1-23(223), a1-24(224), b1-01(301), b1-02(302), b1-03(303), b1-04(304), b1-05(305), b1-06(306), b1-07(307), b1-08(308), b1-09(309), b1-10(310), b1-11(311), b1-12(312), b1-13(313), b1-14(314), b1-15(315), b1-16(316), b1-17(317), b1-18(318), b1-19(319), b1-20(320), b1-21(321), b1-22(322), b1-23(323), b1-24(324)  

adDAXChnl23 1.3.6.1.4.1.664.2.9.5.1.24
The DSO channel connected to channel 23 of adDAXPort.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noConnect(1), a0-01(101), a0-02(102), a0-03(103), a0-04(104), a0-05(105), a0-06(106), a0-07(107), a0-08(108), a0-09(109), a0-10(110), a0-11(111), a0-12(112), a0-13(113), a0-14(114), a0-15(115), a0-16(116), a0-17(117), a0-18(118), a0-19(119), a0-20(120), a0-21(121), a0-22(122), a0-23(123), a0-24(124), a1-01(201), a1-02(202), a1-03(203), a1-04(204), a1-05(205), a1-06(206), a1-07(207), a1-08(208), a1-09(209), a1-10(210), a1-11(211), a1-12(212), a1-13(213), a1-14(214), a1-15(215), a1-16(216), a1-17(217), a1-18(218), a1-19(219), a1-20(220), a1-21(221), a1-22(222), a1-23(223), a1-24(224), b1-01(301), b1-02(302), b1-03(303), b1-04(304), b1-05(305), b1-06(306), b1-07(307), b1-08(308), b1-09(309), b1-10(310), b1-11(311), b1-12(312), b1-13(313), b1-14(314), b1-15(315), b1-16(316), b1-17(317), b1-18(318), b1-19(319), b1-20(320), b1-21(321), b1-22(322), b1-23(323), b1-24(324)  

adDAXChnl24 1.3.6.1.4.1.664.2.9.5.1.25
The DSO channel connected to channel 24 of adDAXPort.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noConnect(1), a0-01(101), a0-02(102), a0-03(103), a0-04(104), a0-05(105), a0-06(106), a0-07(107), a0-08(108), a0-09(109), a0-10(110), a0-11(111), a0-12(112), a0-13(113), a0-14(114), a0-15(115), a0-16(116), a0-17(117), a0-18(118), a0-19(119), a0-20(120), a0-21(121), a0-22(122), a0-23(123), a0-24(124), a1-01(201), a1-02(202), a1-03(203), a1-04(204), a1-05(205), a1-06(206), a1-07(207), a1-08(208), a1-09(209), a1-10(210), a1-11(211), a1-12(212), a1-13(213), a1-14(214), a1-15(215), a1-16(216), a1-17(217), a1-18(218), a1-19(219), a1-20(220), a1-21(221), a1-22(222), a1-23(223), a1-24(224), b1-01(301), b1-02(302), b1-03(303), b1-04(304), b1-05(305), b1-06(306), b1-07(307), b1-08(308), b1-09(309), b1-10(310), b1-11(311), b1-12(312), b1-13(313), b1-14(314), b1-15(315), b1-16(316), b1-17(317), b1-18(318), b1-19(319), b1-20(320), b1-21(321), b1-22(322), b1-23(323), b1-24(324)  

adDAX3AlarmStatus 1.3.6.1.4.1.664.2.9.6.1
This bit map variable indicates alarm status for the ACTDAX and the ACT 1241 channel bank. This item does not include DS1 line status. The various alarm event bit positions are: 1 System Hardware Failure 2 System Software Failure 4 Channel Bank Out Of Service
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adDAX3AlarmEnable 1.3.6.1.4.1.664.2.9.6.2
This bit map variable arms or disarms an individual or group of events identified in adDAX3AlarmStatus as a source for generation of System Alarm Trap. The various arm event bit positions are: 1 System Hardware Failure 2 System Software Failure 4 Channel Bank Out Of Service
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

adDAX3sysAlarm 1.3.6.1.4.1.664.2.9.6.3
This item can be polled to determine if there are any active alarms on the ACTDAX or its corresponding intelligent units.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noAlarms(1), info(2), alert(3), minor(4), major(5), critical(6)  

adDAX3sysAlarmEnable 1.3.6.1.4.1.664.2.9.6.4
This is a global enable/disable for all enterprise traps from this node controller.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

adDAX3LedStatus 1.3.6.1.4.1.664.2.9.6.5
This variable contains bit encoded values for the ACTDAX LED status: 1 RLBK-A (1=off, 0=yellow) 2 ESF-A (1=off, 0=green) 4 B8ZS-A (1=off, 0=green) 8 RLBK-B (1=off, 0=yellow) 16 ESF-B (1=off, 0=green) 32 B8ZS-B (1=off, 0=green) 64 TEST (1=off, 0=yellow) 128 unused 256 DS1-A combine with next bit 512 (00=off, 01=red, 10=green, 11=yellow) 1024 DS1-B combine with next bit 2048 (00=off, 01=red, 10=green, 11=yellow) 4096 STAT combine with next bit 8192 (00=off, 01=red, 10=green) 16384 DS0-PM combine with next bit 32768 (00=off, 01=red, 10=green).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

adDAX3ds1EventTable 1.3.6.1.4.1.664.2.9.7
The DS1 Alarm/Alert Event Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AdDAX3ds1EventEntry

adDAX3ds1EventEntry 1.3.6.1.4.1.664.2.9.7.1
An entry in the DS1 Alarm/Alert Event Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AdDAX3ds1EventEntry  

adDAX3ds1EventIndex 1.3.6.1.4.1.664.2.9.7.1.1
The index value which uniquely identifies the DS1 interface. The interface identified by a particular value of this index is the same interface as identified by dsx1LineIndex in DS1 MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..7fffffff  

adDAX3LineStatus 1.3.6.1.4.1.664.2.9.7.1.2
This bit map variable indicates both alarm and loopback status for the DS1 Line. The various alarm event bit positions are: 1 Far end LOF ( a.k.a., Yellow Alarm ) 2 Near end sending LOF Indication 4 Far end sending AIS ( Blue Alarm ) 8 Near end sending AIS 16 Near end LOF ( a.k.a., Red Alarm ) 32 Near end Loss Of Signal 64 Near end Local Loopback 128 Near end Line Loopback 256 Near end Payload Loopback 512 Far end Requested Line Loopback 1024 Far end Requested Payload Loopback 2048 Far end in Line Loopback (commanded from near end) 4096 Far end in Payload Loopback (commanded from near end)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..8191  

adDAX3LineArm 1.3.6.1.4.1.664.2.9.7.1.3
This bit map variable arms or disarms an individual or group of events identified in adDAX3LineStatus as a source for generation of DS1 Alarm Trap. The various arm event bit positions are: 1 Far end LOF ( a.k.a., Yellow Alarm ) 2 Near end sending LOF Indication 4 Far end sending AIS ( Blue Alarm ) 8 Near end sending AIS 16 Near end LOF ( a.k.a., Red Alarm ) 32 Near end Loss Of Signal 64 Near end Local Loopback 128 Near end Line Loopback 256 Near end Payload Loopback 512 Far end Requested Line Loopback 1024 Far end Requested Payload Loopback 2048 Far end in Line Loopback (commanded from near end) 4096 Far end in Payload Loopback (commanded from near end)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..8191  

adDAX3CurrentAlert 1.3.6.1.4.1.664.2.9.7.1.4
This DS1 performance status variable indicates Threshold Crossing Alerts for Near End Current 15 minute interval. An alert bit is set in this variable when the value of the dsx1CurrentTable object exceeds the Threshold Value. This variable contains the sum of alert values. Threshold Crossing Alert bit position values: 1 ES - Errored Seconds 2 SES - Severely Errored Seconds 4 SEFS - Severely Errored Framing Seconds 8 UAS - Unavailable Seconds 16 CSS - Controlled Slip Seconds 32 PCV - Path Coding Violations 64 LES - Line Errored Seconds 128 BES - Bursty Errored Seconds 256 DM - Degraded Minutes 512 LCV - Line Code Violations
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1023  

adDAX3TotalAlert 1.3.6.1.4.1.664.2.9.7.1.5
This DS1 performance status variable indicates Threshold Crossing Alerts for Near End Total performance variables. An alert bit is set in this variable when the value of the dsx1TotalTable object exceeds the Threshold Value. This variable contains the sum of alert values. Threshold Crossing Alert bit position values: 1 ES - Errored Seconds 2 SES - Severely Errored Seconds 4 SEFS - Severely Errored Framing Seconds 8 UAS - Unavailable Seconds 16 CSS - Controlled Slip Seconds 32 PCV - Path Coding Violations 64 LES - Line Errored Seconds 128 BES - Bursty Errored Seconds 256 DM - Degraded Minutes 512 LCV - Line Code Violations
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1023  

adDAX3FarCurrentAlert 1.3.6.1.4.1.664.2.9.7.1.6
This DS1 performance status variable indicates Threshold Crossing Alerts for Far End Current 15 minute interval. An alert bit is set in this variable when the value of the dsx1FarEndCurrentTable object exceeds the Threshold Value. This variable contains the sum of alert values. Threshold Crossing Alert bit position values: 1 ES - Errored Seconds 2 SES - Severely Errored Seconds 4 SEFS - Severely Errored Framing Seconds 8 UAS - Unavailable Seconds 16 CSS - Controlled Slip Seconds 32 PCV - Path Coding Violations 64 LES - Line Errored Seconds 128 BES - Bursty Errored Seconds 256 DM - Degraded Minutes
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..511  

adDAX3FarTotalAlert 1.3.6.1.4.1.664.2.9.7.1.7
This DS1 performance status variable indicates Threshold Crossing Alerts for Far End Total performance variables. An alert bit is set in this variable when the value of the dsx1FarEndTotalTable object exceeds the Threshold Value. This variable contains the sum of alert values. Threshold Crossing Alert bit position values: 1 ES - Errored Seconds 2 SES - Severely Errored Seconds 4 SEFS - Severely Errored Framing Seconds 8 UAS - Unavailable Seconds 16 CSS - Controlled Slip Seconds 32 PCV - Path Coding Violations 64 LES - Line Errored Seconds 128 BES - Bursty Errored Seconds 256 DM - Degraded Minutes
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..511  

adDAX3CurrentArm 1.3.6.1.4.1.664.2.9.7.1.8
This variable arms and disarms an individual or group of alerts identified in adDAX3CurrentAlert as a source for the generation of Threshold Crossing Alert Trap. This variable contains the sum of Arm values. Threshold Crossing Arm bit position values: 1 ES - Errored Seconds 2 SES - Severely Errored Seconds 4 SEFS - Severely Errored Framing Seconds 8 UAS - Unavailable Seconds 16 CSS - Controlled Slip Seconds 32 PCV - Path Coding Violations 64 LES - Line Errored Seconds 128 BES - Bursty Errored Seconds 256 DM - Degraded Minutes 512 LCV - Line Code Violations
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1023  

adDAX3TotalArm 1.3.6.1.4.1.664.2.9.7.1.9
This variable arms and disarms an individual or group of alerts identified in adDAX3TotalAlert as a source for the generation of Threshold Crossing Alert Trap. This variable contains the sum of Arm values. Threshold Crossing Arm bit position values: 1 ES - Errored Seconds 2 SES - Severely Errored Seconds 4 SEFS - Severely Errored Framing Seconds 8 UAS - Unavailable Seconds 16 CSS - Controlled Slip Seconds 32 PCV - Path Coding Violations 64 LES - Line Errored Seconds 128 BES - Bursty Errored Seconds 256 DM - Degraded Minutes 512 LCV - Line Code Violations
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1023  

adDAX3FarCurrentArm 1.3.6.1.4.1.664.2.9.7.1.10
This variable arms and disarms an individual or group of alerts identified in adDAX3FarCurrentAlert as a source for the generation of Threshold Crossing Alert Trap. This variable contains the sum of Arm values. Threshold Crossing Arm bit position values: 1 ES - Errored Seconds 2 SES - Severely Errored Seconds 4 SEFS - Severely Errored Framing Seconds 8 UAS - Unavailable Seconds 16 CSS - Controlled Slip Seconds 32 PCV - Path Coding Violations 64 LES - Line Errored Seconds 128 BES - Bursty Errored Seconds 256 DM - Degraded Minutes
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..511  

adDAX3FarTotalArm 1.3.6.1.4.1.664.2.9.7.1.11
This variable arms and disarms an individual or group of alerts identified in adDAX3FarTotalAlert as a source for the generation of Threshold Crossing Alert Trap. This variable contains the sum of Arm values. Threshold Crossing Arm bit position values: 1 ES - Errored Seconds 2 SES - Severely Errored Seconds 4 SEFS - Severely Errored Framing Seconds 8 UAS - Unavailable Seconds 16 CSS - Controlled Slip Seconds 32 PCV - Path Coding Violations 64 LES - Line Errored Seconds 128 BES - Bursty Errored Seconds 256 DM - Degraded Minutes
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..511  

adDAX3CurrentThrsTable 1.3.6.1.4.1.664.2.9.8
The DS1 Current Threshold Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AdDAX3CurrentThrsEntry

adDAX3CurrentThrsEntry 1.3.6.1.4.1.664.2.9.8.1
An entry in the DS1 Current Threshold Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AdDAX3CurrentThrsEntry  

adDAX3CurrentThrsIndex 1.3.6.1.4.1.664.2.9.8.1.1
The index value which uniquely identifies the DS1 interface. The interface identified by a particular value of this index is the same interface as identified by dsx1LineIndex in DS1 MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..7fffffff  

adDAX3CurrentThrsES 1.3.6.1.4.1.664.2.9.8.1.2
The DS1 performance monitor Threshold Value for the Current 15 minute Errored Seconds parameter. The default value is 65 for an approximate BER level of (10** -5).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

adDAX3CurrentThrsSES 1.3.6.1.4.1.664.2.9.8.1.3
The DS1 performance monitor Threshold Value for the Current 15 minute Severely Errored Seconds parameter. The default value is 10 for an approximate BER level of (10** -5).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

adDAX3CurrentThrsSEFS 1.3.6.1.4.1.664.2.9.8.1.4
The DS1 performance monitor Threshold Value for the Current 15 minute Severely Errored Framing Seconds parameter. The default value is 2 for an approximate BER level of (10** -5).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

adDAX3CurrentThrsUAS 1.3.6.1.4.1.664.2.9.8.1.5
The DS1 performance monitor Threshold Value for the Current 15 minute Unavailable Seconds parameter. The default value is 10 for an approximate BER level of (10** -5).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

adDAX3CurrentThrsCSS 1.3.6.1.4.1.664.2.9.8.1.6
The DS1 performance monitor Threshold Value for the Current 15 minute Controlled Slip Seconds parameter. The default value is 1 for an approximate BER level of (10** -5).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

adDAX3CurrentThrsPCVsf 1.3.6.1.4.1.664.2.9.8.1.7
The DS1 performance monitor Threshold Value for the Current 15 minute Path Coding Violations parameter, when the Line Type is Super Frame (AT&T D4 format) DS1. Default value for an approximate BER level of (10**-5) is 72 Framing errors.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

adDAX3CurrentThrsPCVesf 1.3.6.1.4.1.664.2.9.8.1.8
The DS1 performance monitor Threshold Value for the Current 15 minute Path Coding Violations parameter, when the Line Type is Extended Super Frame (ESF) DS1. Default value for an approximate BER level of (10**-5) is 13,296 CRC errors.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

adDAX3CurrentThrsLES 1.3.6.1.4.1.664.2.9.8.1.9
The DS1 performance monitor Threshold Value for the Current 15 minute Line Errored Seconds parameter. The default value is 65 for an approximate BER level of (10** -5).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

adDAX3CurrentThrsBES 1.3.6.1.4.1.664.2.9.8.1.10
The DS1 performance monitor Threshold Value for the Current 15 minute Bursty Errored Seconds parameter. The default value is ?? for an approximate BER level of (10** -5).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

adDAX3CurrentThrsLCV 1.3.6.1.4.1.664.2.9.8.1.11
The DS1 performance monitor Threshold Value for the Current 15 minute Line Code Violations parameter. The default value is 13,340 for an approximate BER level of (10** -5).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

adDAX3TotalThrsTable 1.3.6.1.4.1.664.2.9.9
The DS1 Total Threshold Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AdDAX3TotalThrsEntry

adDAX3TotalThrsEntry 1.3.6.1.4.1.664.2.9.9.1
An entry in the DS1 Total Threshold Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AdDAX3TotalThrsEntry  

adDAX3TotalThrsIndex 1.3.6.1.4.1.664.2.9.9.1.1
The index value which uniquely identifies the DS1 interface. The interface identified by a particular value of this index is the same interface as identified by dsx1LineIndex in DS1 MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..7fffffff  

adDAX3TotalThrsES 1.3.6.1.4.1.664.2.9.9.1.2
The DS1 performance monitor Threshold Value for the Total Errored Seconds parameter. The default value is 648 for an approximate BER level of (10** -5).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

adDAX3TotalThrsSES 1.3.6.1.4.1.664.2.9.9.1.3
The DS1 performance monitor Threshold Value for the Total Severely Errored Seconds parameter. The default value is 100 for an approximate BER level of (10** -5).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

adDAX3TotalThrsSEFS 1.3.6.1.4.1.664.2.9.9.1.4
The DS1 performance monitor Threshold Value for the Total Severely Errored Framing Seconds parameter. The default value is 17 for an approximate BER level of (10** -5).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

adDAX3TotalThrsUAS 1.3.6.1.4.1.664.2.9.9.1.5
The DS1 performance monitor Threshold Value for the Total Unavailable Seconds parameter. The default value is 10 for an approximate BER level of (10** -5).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

adDAX3TotalThrsCSS 1.3.6.1.4.1.664.2.9.9.1.6
The DS1 performance monitor Threshold Value for the Total Controlled Slip Seconds parameter. The default value is 4 for an approximate BER level of(10** -5).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

adDAX3TotalThrsPCVsf 1.3.6.1.4.1.664.2.9.9.1.7
The DS1 performance monitor Threshold Value for the Total Path Coding Violations parameter, when the Line Type is Super Frame (AT&T D4 format) DS1. The default value for an approximate BER level of (10**-5) is 691 framing errors.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

adDAX3TotalThrsPCVesf 1.3.6.1.4.1.664.2.9.9.1.8
The DS1 performance monitor Threshold Value for the Total Path Coding Violations parameter, when the Line Type is Extended Super Frame (ESF) DS1. The default value for an approximate BER level of (10**-5) is 132,960 CRC errors.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

adDAX3TotalThrsLES 1.3.6.1.4.1.664.2.9.9.1.9
The DS1 performance monitor Threshold Value for the Total Line Errored Seconds parameter. The default value is 648 for an approximate BER level of (10** -5).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

adDAX3TotalThrsBES 1.3.6.1.4.1.664.2.9.9.1.10
The DS1 performance monitor Threshold Value for the Total Bursty Errored Seconds parameter. The default value is ??? for an approximate BER level of (10** -5).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

adDAX3TotalThrsLCV 1.3.6.1.4.1.664.2.9.9.1.11
The DS1 performance monitor Threshold Value for the Total Line Code Violations parameter. The default value is 133,400 for an approximate BER level of (10** -5).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

adDS1DailyIntervalTable 1.3.6.1.4.1.664.2.9.10
The DS1 Daily Interval Table.
Status: optional Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AdDS1DailyIntervalEntry

adDS1DailyIntervalEntry 1.3.6.1.4.1.664.2.9.10.1
An entry in the DS1 Daily Interval Table.
Status: optional Access: not-accessible
OBJECT-TYPE    
  AdDS1DailyIntervalEntry  

adDS1DailyIntervalIndex 1.3.6.1.4.1.664.2.9.10.1.1
The index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value as a dsx1LineIndex object instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..7fffffff  

adDS1DailyIntervalNumber 1.3.6.1.4.1.664.2.9.10.1.2
A number between 1 and 6, where 1 is the most recently completed 15 minute interval and 6 is the least recently completed daily interval (assuming that all 6 intervals are valid).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..6  

adDS1DailyIntervalValid 1.3.6.1.4.1.664.2.9.10.1.3
Indicates if this daily interval contains valid data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

adDS1DailyIntervalESs 1.3.6.1.4.1.664.2.9.10.1.4
The number of Errored Seconds encountered by a DS1 interface in one of the prevoius daily intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

adDS1DailyIntervalSESs 1.3.6.1.4.1.664.2.9.10.1.5
The number of Severely Errored Seconds encountered by a DS1 interface in one of the previous daily intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

adDS1DailyIntervalSEFSs 1.3.6.1.4.1.664.2.9.10.1.6
The number of Severely Errored Framing Seconds encountered by a DS1 interface in one of the previous daily intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

adDS1DailyIntervalUASs 1.3.6.1.4.1.664.2.9.10.1.7
The number of Unavailable Seconds encountered by a DS1 interface in one of the previous daily intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

adDS1DailyIntervalCSSs 1.3.6.1.4.1.664.2.9.10.1.8
The number of Controlled Slip Seconds encountered by a DS1 interface in one of the previous daily intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

adDS1DailyIntervalPCVs 1.3.6.1.4.1.664.2.9.10.1.9
The number of Path Coding Violations encountered by a DS1 interface in one of the previous daily intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

adDS1DailyIntervalLESs 1.3.6.1.4.1.664.2.9.10.1.10
The number of Line Errored Seconds encountered by a DS1 interface in one of the previous daily intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

adDS1DailyIntervalBESs 1.3.6.1.4.1.664.2.9.10.1.11
The number of Bursty Errored Seconds encountered by a DS1 interface in one of the previous daily intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

adDS1DailyIntervalDMs 1.3.6.1.4.1.664.2.9.10.1.12
The number of Degraded Minutes encountered by a DS1 interface in one of the previous daily intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

adDS1DailyIntervalLCVs 1.3.6.1.4.1.664.2.9.10.1.13
The number of Line Code Violations encountered by a DS1 interface in one of the previous daily intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

adDS1FarEndDailyIntervalTable 1.3.6.1.4.1.664.2.9.11
The DS1 Daily Interval Table.
Status: optional Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AdDS1FarEndDailyIntervalEntry

adDS1FarEndDailyIntervalEntry 1.3.6.1.4.1.664.2.9.11.1
An entry in the DS1 Daily Interval Table.
Status: optional Access: not-accessible
OBJECT-TYPE    
  AdDS1FarEndDailyIntervalEntry  

adDS1FarEndDailyIntervalIndex 1.3.6.1.4.1.664.2.9.11.1.1
The index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value as a dsx1LineIndex object instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..7fffffff  

adDS1FarEndDailyIntervalNumber 1.3.6.1.4.1.664.2.9.11.1.2
A number between 1 and 6, where 1 is the most recently completed 15 minute interval and 6 is the least recently completed daily interval (assuming that all 6 intervals are valid).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..6  

adDS1FarEndDailyIntervalValid 1.3.6.1.4.1.664.2.9.11.1.3
Indicates if this far end daily interval contains valid data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

adDS1FarEndDailyIntervalESs 1.3.6.1.4.1.664.2.9.11.1.4
The number of Far End Errored Seconds encountered by a DS1 interface in one of the prevoius daily intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

adDS1FarEndDailyIntervalSESs 1.3.6.1.4.1.664.2.9.11.1.5
The number of Far End Severely Errored Seconds encountered by a DS1 interface in one of the previous daily intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

adDS1FarEndDailyIntervalSEFSs 1.3.6.1.4.1.664.2.9.11.1.6
The number of Far End Severely Errored Framing Seconds encountered by a DS1 interface in one of the previous daily intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

adDS1FarEndDailyIntervalUASs 1.3.6.1.4.1.664.2.9.11.1.7
The number of Far End Unavailable Seconds encountered by a DS1 interface in one of the previous daily intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

adDS1FarEndDailyIntervalCSSs 1.3.6.1.4.1.664.2.9.11.1.8
The number of Far End Controlled Slip Seconds encountered by a DS1 interface in one of the previous daily intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

adDS1FarEndDailyIntervalPCVs 1.3.6.1.4.1.664.2.9.11.1.9
The number of Far End Path Coding Violations encountered by a DS1 interface in one of the previous daily intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

adDS1FarEndDailyIntervalLESs 1.3.6.1.4.1.664.2.9.11.1.10
The number of Far End Line Errored Seconds encountered by a DS1 interface in one of the previous daily intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

adDS1FarEndDailyIntervalBESs 1.3.6.1.4.1.664.2.9.11.1.11
The number of Far End Bursty Errored Seconds encountered by a DS1 interface in one of the previous daily intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

adDS1FarEndDailyIntervalDMs 1.3.6.1.4.1.664.2.9.11.1.12
The number of Far End Degraded Minutes encountered by a DS1 interface in one of the previous daily intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

adDS1FarEndDailyIntervalLCVs 1.3.6.1.4.1.664.2.9.11.1.13
The number of Far End Line Code Violations encountered by a DS1 interface in one of the previous daily intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

adACTDAXL3systemHdwFailureClear 906
This trap indicates that a system hardware failure has cleared on the ACT DAX.
TRAP-TYPE    

adACTDAXL3systemHdwFailure 907
This trap indicates that a system hardware failure has occured on the ACT DAX.
TRAP-TYPE    

adACTDAXL3systemSfwFailureClear 908
This trap indicates that a system software failure has cleared on the ACT DAX.
TRAP-TYPE    

adACTDAXL3systemSfwFailure 909
This trap indicates that a system software failure has occured on the ACT DAX.
TRAP-TYPE    

adACTDAXL3bankAlarmClear 936
This trap indicates that a ACT 1241 bank has cleared.
TRAP-TYPE    

adACTDAXL3bankAlarm 937
This trap indicates that the ACT 1241 bank is in alarm.
TRAP-TYPE    

adACTDAXL3RxYellowClear 910
This trap indicates that a yellow alarm state has cleared on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3RxYellow 911
This trap indicates that yellow alarm is being received on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3TxYellowClear 912
This trap indicates that a yellow alarm signal is no longer being transmitted on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3TxYellow 913
This trap indicates that a yellow alarm signal is being transmitted on the specifed ds1 line.
TRAP-TYPE    

adACTDAXL3RxAISclear 914
This trap indicates that an alarm indication signal (AIS) state has cleared on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3RxAIS 915
This trap indicates that an alarm indication signal (AIS) state has occured on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3TxAISclear 916
This trap indicates that an alarm indication signal (AIS) is no longer being transmitted on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3TxAIS 917
This trap indicates that an alarm indication signal (AIS) is being transmitted on the specifed ds1 line.
TRAP-TYPE    

adACTDAXL3RedAlarmClear 918
This trap indicates that a red alarm has cleared on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3RedAlarm 919
This trap indicates that a red alarm has occured on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3LOSclear 920
This trap indicates that a loss of signal state has cleared on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3LOS 921
This trap indicates that a loss of signal state has occured on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3LocalLoopClear 922
This trap indicates that a local loopback has cleared on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3LocalLoop 923
This trap indicates that a local loopback has occured on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3LineLoopClear 924
This trap indicates that a line loopback has cleared on the specified ds1 line. The line loopback was commanded by the hardware switch or through an administrative port.
TRAP-TYPE    

adACTDAXL3LineLoop 925
This trap indicates that a line loopback has occured on the specified ds1 line. The line loopback was commanded by the hardware switch or through an administrative port.
TRAP-TYPE    

adACTDAXL3PayloadLoopClear 926
This trap indicates that a payload loopback has occured on the specified ds1 line. The payload loopback was commanded by the hardware switch or through an administrative port.
TRAP-TYPE    

adACTDAXL3PayloadLoop 927
This trap indicates that a payload loopback has occured on the specified ds1 line. The payload loopback was commanded by the hardware switch or through an administrative port.
TRAP-TYPE    

adACTDAXL3fdlLineLoopClear 928
This trap indicates that a line loopback has cleared on the specified ds1 line. The line loopback was commanded from the far end through the facility data link.
TRAP-TYPE    

adACTDAXL3fdlLineLoop 929
This trap indicates that a line loopback has occured on the specified ds1 line. The line loopback was commanded from the far end through the facility data link.
TRAP-TYPE    

adACTDAXL3fdlPayloadLoopClear 930
This trap indicates that a payload loopback has occured on the specified ds1 line. The payload loopback was commanded from the far end through the facility data link.
TRAP-TYPE    

adACTDAXL3fdlPayloadLoop 931
This trap indicates that a payload loopback has occured on the specified ds1 line. The payload loopback was commanded from the far end through the facility data link.
TRAP-TYPE    

adACTDAXL3farLineLoopClear 932
This trap indicates that the far end has cleared a line loopback which was commanded from the near end through the facility data link.
TRAP-TYPE    

adACTDAXL3farLineLoop 933
This trap indicates that the far end has been commanded into a line loopback from the near end through the facility data link.
TRAP-TYPE    

adACTDAXL3farPayloadLoopClear 934
This trap indicates that the far end has cleared a payload loopback which was commanded from the near end through the facility data link.
TRAP-TYPE    

adACTDAXL3farPayloadLoop 935
This trap indicates that the far end has been commanded into a payload loopback from the near end through the facility data link.
TRAP-TYPE    

adACTDAXL3CurrentES 970
This trap indicates that the current interval Errored Seconds threshold has been exceeded on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3CurrentSES 971
This trap indicates that the current interval Severely Errored Seconds threshold has been exceeded on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3CurrentSEFS 972
This trap indicates that the current interval Severely Errored Framing Seconds threshold has been exceeded on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3CurrentUAS 973
This trap indicates that the current interval Unavailable Seconds threshold has been exceeded on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3CurrentCSS 974
This trap indicates that the current interval Controlled Slip Seconds threshold has been exceeded on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3CurrentPCV 975
This trap indicates that the current interval Path Code Violations threshold has been exceeded on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3CurrentLES 976
This trap indicates that the current interval Line Errored Seconds threshold has been exceeded on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3CurrentBES 977
This trap indicates that the current interval Bursty Errored Seconds threshold has been exceeded on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3CurrentLCV 979
This trap indicates that the current interval Line Code Violations threshold has been exceeded on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3DailyES 960
This trap indicates that the daily (total) interval Errored Seconds threshold has been exceeded on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3DailySES 961
This trap indicates that the daily (total) interval Severely Errored Seconds threshold has been exceeded on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3DailySEFS 962
This trap indicates that the daily (total) interval Severely Errored Framing Seconds threshold has been exceeded on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3DailyUAS 963
This trap indicates that the daily (total) interval Unavailable Seconds threshold has been exceeded on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3DailyCSS 964
This trap indicates that the daily (total) interval Controlled Slip Seconds threshold has been exceeded on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3DailyPCV 965
This trap indicates that the daily (total) interval Path Code Violations threshold has been exceeded on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3DailyLES 966
This trap indicates that the daily (total) interval Line Errored Seconds threshold has been exceeded on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3DailyBES 967
This trap indicates that the daily (total) interval Bursty Errored Seconds threshold has been exceeded on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3DailyLCV 969
This trap indicates that the daily (total) interval Line Code Violations threshold has been exceeded on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3FarCurrentES 990
This trap indicates that the far end current interval Errored Seconds threshold has been exceeded on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3FarCurrentSES 991
This trap indicates that the far end current interval Severely Errored Seconds threshold has been exceeded on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3FarCurrentSEFS 992
This trap indicates that the far end current interval Severely Errored Framing Seconds threshold has been exceeded on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3FarCurrentUAS 993
This trap indicates that the far end current interval Unavailable Seconds threshold has been exceeded on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3FarCurrentCSS 994
This trap indicates that the far end current interval Controlled Slip Seconds threshold has been exceeded on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3FarCurrentPCV 995
This trap indicates that the far end current interval Path Code Violations threshold has been exceeded on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3FarCurrentLES 996
This trap indicates that the far end current interval Line Errored Seconds threshold has been exceeded on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3FarCurrentBES 997
This trap indicates that the far end current interval Bursty Errored Seconds threshold has been exceeded on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3FarDailyES 980
This trap indicates that the far end daily (total) interval Errored Seconds threshold has been exceeded on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3FarDailySES 981
This trap indicates that the far end daily (total) interval Severely Errored Seconds threshold has been exceeded on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3FarDailySEFS 982
This trap indicates that the far end daily (total) interval Severely Errored Framing Seconds threshold has been exceeded on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3FarDailyUAS 983
This trap indicates that the far end daily (total) interval Unavailable Seconds threshold has been exceeded on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3FarDailyCSS 984
This trap indicates that the far end daily (total) interval Controlled Slip Seconds threshold has been exceeded on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3FarDailyPCV 985
This trap indicates that the far end daily (total) interval Path Code Violations threshold has been exceeded on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3FarDailyLES 986
This trap indicates that the far end daily (total) interval Line Errored Seconds threshold has been exceeded on the specified ds1 line.
TRAP-TYPE    

adACTDAXL3FarDailyBES 987
This trap indicates that the far end daily (total) interval Bursty Errored Seconds threshold has been exceeded on the specified ds1 line.
TRAP-TYPE