ADAPTEC-UNIVERSAL-STORAGE-MIB

File: ADAPTEC-UNIVERSAL-STORAGE-MIB.mib (113793 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1215
RFC-1212

Imported symbols

enterprises Counter DisplayString
TRAP-TYPE OBJECT-TYPE

Defined Types

TriState  
INTEGER unknown(1), false(2), true(3)    

ObjectStatus  
INTEGER unknown(1), other(2), okay(3), warning(4), failure(5)    

OptionStatus  
INTEGER unknown(1), other(2), notApplicable(3), notInstalled(4), installedAndInactive(5), installedAndActive(6)    

BatteryStatus  
INTEGER unknown(1), other(2), notApplicable(3), notInstalled(4), okay(5), failed(6), charging(7), discharging(8), inMaintenanceMode(9), chargingDisabled(10)    

ZMMStatus  
INTEGER unknown(0), okay(1), charging(2), failed(3), notInstalled(4)    

IndexList  
DisplayString    

AusAggregatedControllerEntry  
SEQUENCE    
  ausAggregatedControllerIndex INTEGER
  ausAggregatedControllerList IndexList

AusControllerEntry  
SEQUENCE    
  ausControllerIndex INTEGER
  ausControllerUniqueId DisplayString
  ausControllerVendor DisplayString
  ausControllerModel DisplayString
  ausControllerRevision DisplayString
  ausControllerSerialNumber DisplayString
  ausControllerDescription DisplayString
  ausControllerHostBusType INTEGER
  ausControllerHostBusMaximumTransferRate INTEGER
  ausControllerNumberOfChannels INTEGER
  ausControllerHighestChannelWithDevices INTEGER
  ausControllerInstalledMemory INTEGER
  ausControllerAudibleAlarmStatus OptionStatus
  ausControllerBatteryStatus BatteryStatus
  ausControllerZMMStatus ZMMStatus
  ausControllerStatus ObjectStatus
  ausControllerOverallStatus ObjectStatus
  ausControllerPerformanceMode INTEGER
  ausControllerMaxCacheSupported INTEGER
  ausControllerMaxCacheAssignedDrives INTEGER
  ausControllerMaximumAllowedMaxCacheDrives INTEGER
  ausControllerNCQStatus INTEGER

AusControllerRelationshipEntry  
SEQUENCE    
  ausControllerRelationshipIndex INTEGER
  ausControllerRelationshipType INTEGER
  ausControllerRelationshipList IndexList
  ausControllerRelationshipRelation INTEGER

AusI2ORaidControllerEntry  
SEQUENCE    
  ausI2ORaidControllerIndex INTEGER
  ausI2ORaidControllerAddress INTEGER
  ausI2ORaidControllerBackgroundTaskPriority INTEGER
  ausI2ORaidControllerBiosRevision DisplayString
  ausI2ORaidControllerSmorRevision DisplayString
  ausI2ORaidControllerMainIndex INTEGER

AusCCodeControllerEntry  
SEQUENCE    
  ausCCodeControllerIndex INTEGER
  ausCCodeControllerPCIBusId INTEGER
  ausCCodeControllerPCISlotNumber INTEGER
  ausCCodeControllerBiosVersion DisplayString
  ausCCodeControllerMainIndex INTEGER

AusHostRAIDControllerEntry  
SEQUENCE    
  ausHostRAIDControllerIndex INTEGER
  ausHostRAIDControllerPCIBus INTEGER
  ausHostRAIDControllerPCIDevice INTEGER
  ausHostRAIDControllerPCIFunction INTEGER
  ausHostRAIDControllerMainIndex INTEGER

AusServeRAIDControllerEntry  
SEQUENCE    
  ausServeRAIDControllerIndex INTEGER
  ausServeRAIDControllerBIOSRevision DisplayString
  ausServeRAIDControllerDefaultRebuildRate INTEGER
  ausServeRAIDControllerSlotNumber INTEGER
  ausServeRAIDControllerMainIndex INTEGER

AusChannelEntry  
SEQUENCE    
  ausChannelIndex INTEGER
  ausChannelLocation INTEGER
  ausChannelAusControllerIndex INTEGER
  ausChannelAusControllerChannelNumber INTEGER
  ausChannelType INTEGER
  ausChannelTypeDescription DisplayString
  ausChannelControllerId DisplayString
  ausChannelControllerSubId DisplayString
  ausChannelWidth INTEGER
  ausChannelMaximumTransferRate INTEGER
  ausChannelMaximumAttachments INTEGER
  ausChannelOverallStatus ObjectStatus

AusChannelRelationshipEntry  
SEQUENCE    
  ausChannelRelationshipIndex INTEGER
  ausChannelRelationshipList IndexList
  ausChannelRelationshipRelation INTEGER

AusDeviceEntry  
SEQUENCE    
  ausDeviceIndex INTEGER
  ausDeviceUniqueId DisplayString
  ausDeviceAusChannelIndices IndexList
  ausDeviceType INTEGER
  ausDeviceTypeGroup INTEGER
  ausDeviceVendor DisplayString
  ausDeviceModel DisplayString
  ausDeviceRevision DisplayString
  ausDeviceSerialNumber DisplayString
  ausDeviceNumberOfPorts INTEGER
  ausDeviceStatus ObjectStatus
  ausDeviceLocation DisplayString
  ausDeviceMaxCacheCapable INTEGER
  ausDeviceMaxCacheAssigned INTEGER
  ausDeviceSataNCQEnabled INTEGER

AusDevicePortEntry  
SEQUENCE    
  ausDevicePortIndex INTEGER
  ausDevicePortUniqueId DisplayString
  ausDevicePortAusDeviceIndex INTEGER
  ausDevicePortAusDevicePortNumber INTEGER
  ausDevicePortAusChannelIndex INTEGER
  ausDevicePortId DisplayString
  ausDevicePortSubId DisplayString
  ausDevicePortWidth INTEGER
  ausDevicePortMaximumTransferRate INTEGER
  ausDevicePortNegotiatedTransferRate INTEGER
  ausDevicePortStatus ObjectStatus

AusStorageDeviceEntry  
SEQUENCE    
  ausStorageDeviceIndex INTEGER
  ausStorageDeviceDescription DisplayString
  ausStorageDeviceFormattedCapacity INTEGER
  ausStorageDeviceBlockSize INTEGER
  ausStorageDeviceNumberOfBlocksLow INTEGER
  ausStorageDeviceNumberOfBlocksHigh INTEGER
  ausStorageDeviceRemovableMedia INTEGER
  ausStorageDeviceSmartStatus INTEGER
  ausStorageDeviceMainIndex INTEGER

AusEnclosureDeviceEntry  
SEQUENCE    
  ausEnclosureDeviceIndex INTEGER
  ausEnclosureDeviceDescription DisplayString
  ausEnclosureDeviceProcessorType INTEGER
  ausEnclosureDeviceNumberOfFans INTEGER
  ausEnclosureDeviceNumberOfPowerSupplies INTEGER
  ausEnclosureDeviceNumberOfSlots INTEGER
  ausEnclosureDeviceNumberOfTemperatureSensors INTEGER
  ausEnclosureDeviceIdLow INTEGER
  ausEnclosureDeviceIdHigh INTEGER
  ausEnclosureDeviceStandardRevision DisplayString
  ausEnclosureDevicePowerOnTime INTEGER
  ausEnclosureDevicePowerCycles INTEGER
  ausEnclosureDeviceDoorLock OptionStatus
  ausEnclosureDeviceSpeaker OptionStatus
  ausEnclosureDeviceTemperatureState INTEGER
  ausEnclosureDeviceMainIndex INTEGER

AusExternalRaidDeviceEntry  
SEQUENCE    
  ausExternalRaidDeviceIndex INTEGER
  ausExternalRaidDeviceDescription DisplayString
  ausExternalRaidDeviceNumberOfChannels INTEGER
  ausExternalRaidDeviceInstalledMemory INTEGER
  ausExternalRaidDeviceAudibleAlarmStatus OptionStatus
  ausExternalRaidDeviceBatteryStatus BatteryStatus
  ausExternalRaidDeviceMainIndex INTEGER

AusOtherDeviceEntry  
SEQUENCE    
  ausOtherDeviceIndex INTEGER
  ausOtherDeviceDescription DisplayString
  ausOtherDeviceMainIndex INTEGER

AusEnclosureFanEntry  
SEQUENCE    
  ausEnclosureFanIndex INTEGER
  ausEnclosureFanAusEnclosureDeviceIndex INTEGER
  ausEnclosureFanOrdinal INTEGER
  ausEnclosureFanSpeed INTEGER
  ausEnclosureFanStatus ObjectStatus

AusEnclosurePowerSupplyEntry  
SEQUENCE    
  ausEnclosurePowerSupplyIndex INTEGER
  ausEnclosurePowerSupplyAusEnclosureDeviceIndex INTEGER
  ausEnclosurePowerSupplyOrdinal INTEGER
  ausEnclosurePowerSupplyStatus INTEGER

AusEnclosureTemperatureSensorEntry  
SEQUENCE    
  ausEnclosureTemperatureSensorIndex INTEGER
  ausEnclosureTemperatureSensorAusEnclosureDeviceIndex INTEGER
  ausEnclosureTemperatureSensorOrdinal INTEGER
  ausEnclosureTemperatureSensorOverTemperature ObjectStatus
  ausEnclosureTemperatureSensorDegrees INTEGER

AusEnclosureSlotEntry  
SEQUENCE    
  ausEnclosureSlotIndex INTEGER
  ausEnclosureSlotAusEnclosureDeviceIndex INTEGER
  ausEnclosureSlotOrdinal INTEGER
  ausEnclosureSlotPortId DisplayString
  ausEnclosureSlotInsertions INTEGER

AusArrayEntry  
SEQUENCE    
  ausArrayIndex INTEGER
  ausArrayName DisplayString
  ausArrayCapacity INTEGER
  ausArrayType INTEGER
  ausArrayStripeSize INTEGER
  ausArrayTaskStatus INTEGER
  ausArrayTaskCompletion INTEGER
  ausArrayTaskPriority INTEGER
  ausArrayHostingControllerType INTEGER
  ausArrayHostingControllerIndex INTEGER
  ausArrayStatus ObjectStatus
  ausArrayState INTEGER
  ausArrayCacheStatus INTEGER
  ausArrayMembership INTEGER
  ausArrayID INTEGER
  ausArrayPMStatus INTEGER
  ausStandbyTimer INTEGER
  ausPowerOffTimer INTEGER
  ausVerifyTimer INTEGER
  ausArrayMaxCachePreferredCacheSetting INTEGER
  ausArrayMaxCacheSetting INTEGER

AusExtentEntry  
SEQUENCE    
  ausExtentIndex INTEGER
  ausExtentAusDeviceIndex INTEGER
  ausExtentSize INTEGER
  ausExtentStartingLBALow INTEGER
  ausExtentStartingLBAHigh INTEGER
  ausExtentNumberOfBlocksLow INTEGER
  ausExtentNumberOfBlocksHigh INTEGER
  ausExtentArrayMembership INTEGER

AusSpareEntry  
SEQUENCE    
  ausSpareIndex INTEGER
  ausSpareAusDeviceIndex INTEGER
  ausSpareType INTEGER
  ausSpareAusControllerOrArrayIndex INTEGER

AusEventLogEntry  
SEQUENCE    
  ausEventLogTimeStamp DisplayString
  ausEventLogString DisplayString
  ausEventType DisplayString
  ausEvenCode INTEGER

Defined Values

adaptec 1.3.6.1.4.1.795
OBJECT IDENTIFIER    

universalStorage 1.3.6.1.4.1.795.14
OBJECT IDENTIFIER    

ausMIB 1.3.6.1.4.1.795.14.1
OBJECT IDENTIFIER    

ausMibStatus 1.3.6.1.4.1.795.14.1.100
OBJECT IDENTIFIER    

ausAggregatedController 1.3.6.1.4.1.795.14.1.200
OBJECT IDENTIFIER    

ausController 1.3.6.1.4.1.795.14.1.201
OBJECT IDENTIFIER    

ausControllerRelationship 1.3.6.1.4.1.795.14.1.202
OBJECT IDENTIFIER    

ausI2ORaidController 1.3.6.1.4.1.795.14.1.210
OBJECT IDENTIFIER    

ausCCodeController 1.3.6.1.4.1.795.14.1.211
OBJECT IDENTIFIER    

ausHostRAIDController 1.3.6.1.4.1.795.14.1.212
OBJECT IDENTIFIER    

ausServeRAIDController 1.3.6.1.4.1.795.14.1.213
OBJECT IDENTIFIER    

ausChannel 1.3.6.1.4.1.795.14.1.300
OBJECT IDENTIFIER    

ausChannelRelationship 1.3.6.1.4.1.795.14.1.301
OBJECT IDENTIFIER    

ausDevice 1.3.6.1.4.1.795.14.1.400
OBJECT IDENTIFIER    

ausDevicePort 1.3.6.1.4.1.795.14.1.401
OBJECT IDENTIFIER    

ausStorageDevice 1.3.6.1.4.1.795.14.1.410
OBJECT IDENTIFIER    

ausEnclosureDevice 1.3.6.1.4.1.795.14.1.411
OBJECT IDENTIFIER    

ausExternalRaidDevice 1.3.6.1.4.1.795.14.1.412
OBJECT IDENTIFIER    

ausOtherDevice 1.3.6.1.4.1.795.14.1.499
OBJECT IDENTIFIER    

ausEnclosureFan 1.3.6.1.4.1.795.14.1.500
OBJECT IDENTIFIER    

ausEnclosurePowerSupply 1.3.6.1.4.1.795.14.1.501
OBJECT IDENTIFIER    

ausEnclosureTemperatureSensor 1.3.6.1.4.1.795.14.1.502
OBJECT IDENTIFIER    

ausEnclosureSlot 1.3.6.1.4.1.795.14.1.503
OBJECT IDENTIFIER    

ausArray 1.3.6.1.4.1.795.14.1.1000
OBJECT IDENTIFIER    

ausExtent 1.3.6.1.4.1.795.14.1.1001
OBJECT IDENTIFIER    

ausSpare 1.3.6.1.4.1.795.14.1.1002
OBJECT IDENTIFIER    

ausEventLogCount 1.3.6.1.4.1.795.14.1.2000
OBJECT IDENTIFIER    

ausEventLog 1.3.6.1.4.1.795.14.1.2001
OBJECT IDENTIFIER    

ausMibStatusRevMajor 1.3.6.1.4.1.795.14.1.100.1
The major number of the revision of the Adaptec Universal Storage MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausMibStatusRevMinor 1.3.6.1.4.1.795.14.1.100.2
The minor number of the revision of the Adaptec Universal Storage MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausMibStatusSecondsSinceInitiation 1.3.6.1.4.1.795.14.1.100.3
The number of elapsed seconds since this SNMP subagent was initiated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausMibStatusCopyright 1.3.6.1.4.1.795.14.1.100.4
Copyright notification. This string shall always be reported as 'Copyright (C) 2011 PMC-Sierra, Inc'. The year may be modified as appropriate.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ausMibStatusOverall 1.3.6.1.4.1.795.14.1.100.5
Overall operational status. This is the 'worst' overall status of all controllers reported in the MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  ObjectStatus  

ausAggregatedControllerTable 1.3.6.1.4.1.795.14.1.200.1
A list of aggregated controllers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AusAggregatedControllerEntry

ausAggregatedControllerEntry 1.3.6.1.4.1.795.14.1.200.1.1
An aggregated controller entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AusAggregatedControllerEntry  

ausAggregatedControllerIndex 1.3.6.1.4.1.795.14.1.200.1.1.1
A unique index value for each aggregated controller beginning with 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausAggregatedControllerList 1.3.6.1.4.1.795.14.1.200.1.1.2
A list of indices into the ausControllerTable specifying the controllers that are aggregated by a software driver to form an array.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IndexList  

ausControllerTable 1.3.6.1.4.1.795.14.1.201.1
A list of controllers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AusControllerEntry

ausControllerEntry 1.3.6.1.4.1.795.14.1.201.1.1
A controller entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AusControllerEntry  

ausControllerIndex 1.3.6.1.4.1.795.14.1.201.1.1.1
A unique index value for each controller beginning with 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausControllerUniqueId 1.3.6.1.4.1.795.14.1.201.1.1.2
An ID for this controller that is unique across all namespaces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ausControllerVendor 1.3.6.1.4.1.795.14.1.201.1.1.3
Vendor (manufacturer) of the controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ausControllerModel 1.3.6.1.4.1.795.14.1.201.1.1.4
Model (descriptive name) of the controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ausControllerRevision 1.3.6.1.4.1.795.14.1.201.1.1.5
Revision information of the controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ausControllerSerialNumber 1.3.6.1.4.1.795.14.1.201.1.1.6
Serial number of the controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ausControllerDescription 1.3.6.1.4.1.795.14.1.201.1.1.7
Free form text for additional description of the controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ausControllerHostBusType 1.3.6.1.4.1.795.14.1.201.1.1.8
Type of host computer system bus for this controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), other(2), notApplicable(3), pci(4), pci-32(5), pci-64(6), pcix(7), pcie(8)  

ausControllerHostBusMaximumTransferRate 1.3.6.1.4.1.795.14.1.201.1.1.9
Maximum possible transfer rate on the host bus in megabytes per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausControllerNumberOfChannels 1.3.6.1.4.1.795.14.1.201.1.1.10
The number of channels present on this controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausControllerHighestChannelWithDevices 1.3.6.1.4.1.795.14.1.201.1.1.11
The 0-relative channel number within the controller which has at least one device attached to it.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausControllerInstalledMemory 1.3.6.1.4.1.795.14.1.201.1.1.12
Memory installed on this controller in megabytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausControllerAudibleAlarmStatus 1.3.6.1.4.1.795.14.1.201.1.1.13
Status of audible alarm for this controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OptionStatus  

ausControllerBatteryStatus 1.3.6.1.4.1.795.14.1.201.1.1.14
Status of battery for this controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  BatteryStatus  

ausControllerZMMStatus 1.3.6.1.4.1.795.14.1.201.1.1.15
Status of ZMM for this controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  ZMMStatus  

ausControllerStatus 1.3.6.1.4.1.795.14.1.201.1.1.16
Operational status of this controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  ObjectStatus  

ausControllerOverallStatus 1.3.6.1.4.1.795.14.1.201.1.1.17
Overall operational status of this controller and its children. This is the 'worst' status of the controller status and that of all arrays and un-arrayed devices attached to this controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  ObjectStatus  

ausControllerPerformanceMode 1.3.6.1.4.1.795.14.1.201.1.1.18
To ensure optimal performance of the logical drives in the storage space, the performance mode is used.It improves I/O throughput based on the needs of the application.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER dynamic(0), oltpdatabase(3)  

ausControllerMaxCacheSupported 1.3.6.1.4.1.795.14.1.201.1.1.19
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

ausControllerMaxCacheAssignedDrives 1.3.6.1.4.1.795.14.1.201.1.1.20
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notSupported(-1)  

ausControllerMaximumAllowedMaxCacheDrives 1.3.6.1.4.1.795.14.1.201.1.1.21
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notSupported(-1)  

ausControllerNCQStatus 1.3.6.1.4.1.795.14.1.201.1.1.22
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

ausControllerRelationshipTable 1.3.6.1.4.1.795.14.1.202.1
A list of controller relationships.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AusControllerRelationshipEntry

ausControllerRelationshipEntry 1.3.6.1.4.1.795.14.1.202.1.1
A controller relationship entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AusControllerRelationshipEntry  

ausControllerRelationshipIndex 1.3.6.1.4.1.795.14.1.202.1.1.1
A unique index value for each controller relationship beginning with 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausControllerRelationshipType 1.3.6.1.4.1.795.14.1.202.1.1.2
Selects whether this row entry is a relationship between entries in the ausController table or entries in the ausExternalRaidDevice table. Setting of this field determines if the ausControllerRelationshipList is a list of indices in the ausController table or the ausExternalRaidDevice table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hostAttachedController(1), externalRaid(2)  

ausControllerRelationshipList 1.3.6.1.4.1.795.14.1.202.1.1.3
A list of indices into the appropriate controller table specifying the controllers that are related.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IndexList  

ausControllerRelationshipRelation 1.3.6.1.4.1.795.14.1.202.1.1.4
The attributes of the relationship among the related controllers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausI2ORaidControllerTable 1.3.6.1.4.1.795.14.1.210.1
A list of I2O RAID storage controllers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AusI2ORaidControllerEntry

ausI2ORaidControllerEntry 1.3.6.1.4.1.795.14.1.210.1.1
A I2O RAID storage controller entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AusI2ORaidControllerEntry  

ausI2ORaidControllerIndex 1.3.6.1.4.1.795.14.1.210.1.1.1
A unique index value for each I2O RAID controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausI2ORaidControllerAddress 1.3.6.1.4.1.795.14.1.210.1.1.2
The controller Address (normally displayed in hex.) It is a 32-bit value representing the memory address used by the controller
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..FFFFFFFE  

ausI2ORaidControllerBackgroundTaskPriority 1.3.6.1.4.1.795.14.1.210.1.1.3
This object controls the priority of array background tasks such as Build, Rebuild and Verify for this controller. The values range from 1 to 10. A value of 1 is the slowest but uses the least amount of the controller's bandwidth. While a value of 10 is the fastest but it uses the most bandwidth.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..10  

ausI2ORaidControllerBiosRevision 1.3.6.1.4.1.795.14.1.210.1.1.4
The controller B.I.O.S. revision information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ausI2ORaidControllerSmorRevision 1.3.6.1.4.1.795.14.1.210.1.1.5
The controller S.M.O.R. revision information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ausI2ORaidControllerMainIndex 1.3.6.1.4.1.795.14.1.210.1.1.6
This is the index into ausControllerTable of the row that is extended by this row of ausI2ORaidControllerTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausCCodeControllerTable 1.3.6.1.4.1.795.14.1.211.1
A list of Container Code storage controllers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AusCCodeControllerEntry

ausCCodeControllerEntry 1.3.6.1.4.1.795.14.1.211.1.1
A Container Code storage controller entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AusCCodeControllerEntry  

ausCCodeControllerIndex 1.3.6.1.4.1.795.14.1.211.1.1.1
A unique index value for each Container Code controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausCCodeControllerPCIBusId 1.3.6.1.4.1.795.14.1.211.1.1.2
The identifier of the host computer PCI bus the controller is attached to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausCCodeControllerPCISlotNumber 1.3.6.1.4.1.795.14.1.211.1.1.3
The slot number of the host computer PCI bus the controller is in.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausCCodeControllerBiosVersion 1.3.6.1.4.1.795.14.1.211.1.1.4
The B.I.O.S. software version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ausCCodeControllerMainIndex 1.3.6.1.4.1.795.14.1.211.1.1.5
This is the index into ausControllerTable of the row that is extended by this row of ausCCodeControllerTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausHostRAIDControllerTable 1.3.6.1.4.1.795.14.1.212.1
A list of HostRAID storage controllers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AusHostRAIDControllerEntry

ausHostRAIDControllerEntry 1.3.6.1.4.1.795.14.1.212.1.1
A HostRAID storage controller entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AusHostRAIDControllerEntry  

ausHostRAIDControllerIndex 1.3.6.1.4.1.795.14.1.212.1.1.1
A unique index value for each HostRAID controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausHostRAIDControllerPCIBus 1.3.6.1.4.1.795.14.1.212.1.1.2
The PCI bus number of this controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausHostRAIDControllerPCIDevice 1.3.6.1.4.1.795.14.1.212.1.1.3
The PCI device number of this controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausHostRAIDControllerPCIFunction 1.3.6.1.4.1.795.14.1.212.1.1.4
The PCI function number of this controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausHostRAIDControllerMainIndex 1.3.6.1.4.1.795.14.1.212.1.1.5
This is the index into ausControllerTable of the row that is extended by this row of ausI2ORaidControllerTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausServeRAIDControllerTable 1.3.6.1.4.1.795.14.1.213.1
A list of ServeRAID storage controllers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AusServeRAIDControllerEntry

ausServeRAIDControllerEntry 1.3.6.1.4.1.795.14.1.213.1.1
A ServeRAID storage controller entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AusServeRAIDControllerEntry  

ausServeRAIDControllerIndex 1.3.6.1.4.1.795.14.1.213.1.1.1
A unique index value for each ServeRAID controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausServeRAIDControllerBIOSRevision 1.3.6.1.4.1.795.14.1.213.1.1.2
The B.I.O.S. Revision of this controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ausServeRAIDControllerDefaultRebuildRate 1.3.6.1.4.1.795.14.1.213.1.1.3
The default rebuild rate of this controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), other(2), low(3), medium(4), high(5)  

ausServeRAIDControllerSlotNumber 1.3.6.1.4.1.795.14.1.213.1.1.4
The slot number of this controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausServeRAIDControllerMainIndex 1.3.6.1.4.1.795.14.1.213.1.1.5
This is the index into ausControllerTable of the row that is extended by this row of ausServeRAIDControllerTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausChannelTable 1.3.6.1.4.1.795.14.1.300.1
A list of channels.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AusChannelEntry

ausChannelEntry 1.3.6.1.4.1.795.14.1.300.1.1
A channel entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AusChannelEntry  

ausChannelIndex 1.3.6.1.4.1.795.14.1.300.1.1.1
A unique index value for each channel beginning with 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausChannelLocation 1.3.6.1.4.1.795.14.1.300.1.1.2
Indicates whether the channelAusControllerIndex field should be interpreted as an index into the controllerTable or the externalRaidDeviceTable. In other words, shows whether this channel is a channel connected directly to the host or is a back-end channel connected to an external RAID controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hostAttached(1), externalRaid(2)  

ausChannelAusControllerIndex 1.3.6.1.4.1.795.14.1.300.1.1.3
Index into the Adaptec Universal Storage controller table containing the entry that hosts this channel, or an index into the externalRaidDevice table containing the external RAID controller that hosts this channel. Where the index points is selected by channelLocation above.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausChannelAusControllerChannelNumber 1.3.6.1.4.1.795.14.1.300.1.1.4
Channel number within the controller referenced by channelAusControllerIndex. Channels are numbered sequentially starting with 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausChannelType 1.3.6.1.4.1.795.14.1.300.1.1.5
Physical transmission technology for this channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), other(2), scsi(3), ide(4), fibreChannel(5), sata(6), sas(7)  

ausChannelTypeDescription 1.3.6.1.4.1.795.14.1.300.1.1.6
A finer-grained description for the channel. For example, SCSI may be further refined as 'Ultra160' or 'Ultra320'. IDE may be further refined per the various different performance types available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ausChannelControllerId 1.3.6.1.4.1.795.14.1.300.1.1.7
Controller ID number used on this channel. Meaning is dependent on channelType. For example, SCSI channels would report controller SCSI ID in this field. The field is a string to allow for a wide range of addressing schemes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ausChannelControllerSubId 1.3.6.1.4.1.795.14.1.300.1.1.8
Controller SubId number used on this channel. Meaning is dependent on channelType. For example, SCSI channels would report controller SCSI LUN in this field. The field is a string to allow for a wide range of addressing schemes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ausChannelWidth 1.3.6.1.4.1.795.14.1.300.1.1.9
Width of the channel in bits. For example, SCSI would be 8 or 16. Serial interfaces would be 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausChannelMaximumTransferRate 1.3.6.1.4.1.795.14.1.300.1.1.10
Maximum transfer rate of this channel in megabytes per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausChannelMaximumAttachments 1.3.6.1.4.1.795.14.1.300.1.1.11
Maximum number of devices that may be attached to this this channel (include controller in the count). In case of SATA, this is the total number of ports. Ports are virtualized into IDs on 'SCSI channels'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausChannelOverallStatus 1.3.6.1.4.1.795.14.1.300.1.1.12
Overall operational status of this channel. This is the 'worst' status of all arrays and un-arrayed devices attached to this channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  ObjectStatus  

ausChannelRelationshipTable 1.3.6.1.4.1.795.14.1.301.1
A list of channel relationships.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AusChannelRelationshipEntry

ausChannelRelationshipEntry 1.3.6.1.4.1.795.14.1.301.1.1
A channel relationship entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AusChannelRelationshipEntry  

ausChannelRelationshipIndex 1.3.6.1.4.1.795.14.1.301.1.1.1
A unique index value for each channel relationship beginning with 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausChannelRelationshipList 1.3.6.1.4.1.795.14.1.301.1.1.2
A list of indices into the channel table specifying the channels that are related.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IndexList  

ausChannelRelationshipRelation 1.3.6.1.4.1.795.14.1.301.1.1.3
The attributes of the relationship among the related controllers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausDeviceTable 1.3.6.1.4.1.795.14.1.400.1
A list of devices.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AusDeviceEntry

ausDeviceEntry 1.3.6.1.4.1.795.14.1.400.1.1
A device entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AusDeviceEntry  

ausDeviceIndex 1.3.6.1.4.1.795.14.1.400.1.1.1
A unique index value for each device beginning with 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausDeviceUniqueId 1.3.6.1.4.1.795.14.1.400.1.1.2
An ID for this device that is unique across all namespaces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ausDeviceAusChannelIndices 1.3.6.1.4.1.795.14.1.400.1.1.3
A list of indices into the Adaptec Universal Storage Channel table to which this device is attached. (For detailed information about connections between the device and the channel, refer to the ausDevicePort table.)
Status: mandatory Access: read-only
OBJECT-TYPE    
  IndexList  

ausDeviceType 1.3.6.1.4.1.795.14.1.400.1.1.4
Device type for this device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), other(2), directAccess(3), sequentialAccess(4), printer(5), processor(6), writeOnce(7), cdRom(8), scanner(9), opticalMemory(10), mediumChanger(11), communications(12)  

ausDeviceTypeGroup 1.3.6.1.4.1.795.14.1.400.1.1.5
Selects which of the subordinate device tables contains more information about this device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noSubordinateTable(1), storageDevice(2), enclosureDevice(3), externalRaidDevice(4), otherDevice(5)  

ausDeviceVendor 1.3.6.1.4.1.795.14.1.400.1.1.6
Vendor (manufacturer) of this device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ausDeviceModel 1.3.6.1.4.1.795.14.1.400.1.1.7
Model of this device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ausDeviceRevision 1.3.6.1.4.1.795.14.1.400.1.1.8
Revision information for this device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ausDeviceSerialNumber 1.3.6.1.4.1.795.14.1.400.1.1.9
Serial number of this device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ausDeviceNumberOfPorts 1.3.6.1.4.1.795.14.1.400.1.1.10
Number of entries present in the device port table for this device (which is the same as the number of ports on the device).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausDeviceStatus 1.3.6.1.4.1.795.14.1.400.1.1.11
Operational status of this device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  ObjectStatus  

ausDeviceLocation 1.3.6.1.4.1.795.14.1.400.1.1.12
Describes the location of this device in a technology-specific manner. This value usually matches the location string on any traps involving this device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ausDeviceMaxCacheCapable 1.3.6.1.4.1.795.14.1.400.1.1.13
.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1), unknown(-1)  

ausDeviceMaxCacheAssigned 1.3.6.1.4.1.795.14.1.400.1.1.14
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1), unknown(-1)  

ausDeviceSataNCQEnabled 1.3.6.1.4.1.795.14.1.400.1.1.15
.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1), unknown(-1)  

ausDevicePortTable 1.3.6.1.4.1.795.14.1.401.1
A list of device ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AusDevicePortEntry

ausDevicePortEntry 1.3.6.1.4.1.795.14.1.401.1.1
A device port entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AusDevicePortEntry  

ausDevicePortIndex 1.3.6.1.4.1.795.14.1.401.1.1.1
A unique index value for each device port beginning with 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausDevicePortUniqueId 1.3.6.1.4.1.795.14.1.401.1.1.2
An ID for this device port that is unique across all namespaces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ausDevicePortAusDeviceIndex 1.3.6.1.4.1.795.14.1.401.1.1.3
Index into the Adaptec Universal Storage Device table locating the device that contains this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausDevicePortAusDevicePortNumber 1.3.6.1.4.1.795.14.1.401.1.1.4
Port number within the device referenced by ausDevicePortAusDeviceIndex. Ports are numbered sequentially starting with 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausDevicePortAusChannelIndex 1.3.6.1.4.1.795.14.1.401.1.1.5
Index into the Adaptec Universal Storage Channel table locating the channel to which this device port is attached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausDevicePortId 1.3.6.1.4.1.795.14.1.401.1.1.6
Port ID number used by this device. Meaning is dependent on channel type. For example, SCSI channels would report device SCSI ID in this field. The field is a string to allow for a wide range of addressing schemes. For non-parallel SCSI this is the virtual SCSI targetId
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ausDevicePortSubId 1.3.6.1.4.1.795.14.1.401.1.1.7
Port SubId number used by this device. Meaning is dependent on channel type. For example, SCSI channels would report device SCSI LUN in this field. The field is a string to allow for a wide range of addressing schemes. For non-parallel SCSI this is the virtual SCSI LUN
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ausDevicePortWidth 1.3.6.1.4.1.795.14.1.401.1.1.8
Port width capability of this device. This may be narrower than the channel width - for example, an eight bit SCSI device on a sixteen bit SCSI channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausDevicePortMaximumTransferRate 1.3.6.1.4.1.795.14.1.401.1.1.9
Maximum transfer rate of this device in megabytes per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausDevicePortNegotiatedTransferRate 1.3.6.1.4.1.795.14.1.401.1.1.10
Negotiated transfer rate of this device port/ controller channel pair in megabytes per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(-1), b5(0), b10(5), b20(10), b40(20), b80(40), b160(80), b320(160), optimal(30), b187(150), b375(300), b750(600), b187(151), b375(301), b750(601)  

ausDevicePortStatus 1.3.6.1.4.1.795.14.1.401.1.1.11
Operational status of this device port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  ObjectStatus  

ausStorageDeviceTable 1.3.6.1.4.1.795.14.1.410.1
A list of storage devices.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AusStorageDeviceEntry

ausStorageDeviceEntry 1.3.6.1.4.1.795.14.1.410.1.1
A storage device entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AusStorageDeviceEntry  

ausStorageDeviceIndex 1.3.6.1.4.1.795.14.1.410.1.1.1
A unique index value for each storage device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausStorageDeviceDescription 1.3.6.1.4.1.795.14.1.410.1.1.2
Free form text for additional description of the storage device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ausStorageDeviceFormattedCapacity 1.3.6.1.4.1.795.14.1.410.1.1.3
Formatted capacity of this storage device in megabytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausStorageDeviceBlockSize 1.3.6.1.4.1.795.14.1.410.1.1.4
Physical block size of this storage device in bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausStorageDeviceNumberOfBlocksLow 1.3.6.1.4.1.795.14.1.410.1.1.5
Number of physical blocks for this storage device (least significant 32 bits of 64 bit value).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausStorageDeviceNumberOfBlocksHigh 1.3.6.1.4.1.795.14.1.410.1.1.6
Number of physical blocks for this storage device (most significant 32 bits of 64 bit value).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausStorageDeviceRemovableMedia 1.3.6.1.4.1.795.14.1.410.1.1.7
Status of removable media for this storage device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), notSupported(2), supportedAndNotLoaded(3), supportedAndLoaded(4)  

ausStorageDeviceSmartStatus 1.3.6.1.4.1.795.14.1.410.1.1.8
S.M.A.R.T. status of this storage device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), notSupported(2), notEnabled(3), okay(4), errorPredicted(5)  

ausStorageDeviceMainIndex 1.3.6.1.4.1.795.14.1.410.1.1.9
This is the index into ausDeviceTable of the row that is extended by this row of ausStorageDeviceTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausEnclosureDeviceTable 1.3.6.1.4.1.795.14.1.411.1
A list of enclosure devices.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AusEnclosureDeviceEntry

ausEnclosureDeviceEntry 1.3.6.1.4.1.795.14.1.411.1.1
An enclosure device entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AusEnclosureDeviceEntry  

ausEnclosureDeviceIndex 1.3.6.1.4.1.795.14.1.411.1.1.1
A unique index value for each enclosure device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausEnclosureDeviceDescription 1.3.6.1.4.1.795.14.1.411.1.1.2
Free form text for additional description of the enclosure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ausEnclosureDeviceProcessorType 1.3.6.1.4.1.795.14.1.411.1.1.3
Standard supported by this enclosure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), other(2), decFault(3), saf-te(4), ses(5), aemi(6)  

ausEnclosureDeviceNumberOfFans 1.3.6.1.4.1.795.14.1.411.1.1.4
Number of fans installed in this enclosure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausEnclosureDeviceNumberOfPowerSupplies 1.3.6.1.4.1.795.14.1.411.1.1.5
Number of power supplies installed in this enclosure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausEnclosureDeviceNumberOfSlots 1.3.6.1.4.1.795.14.1.411.1.1.6
Number of slots installed in this enclosure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausEnclosureDeviceNumberOfTemperatureSensors 1.3.6.1.4.1.795.14.1.411.1.1.7
Number of temperature sensors installed in this enclosure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausEnclosureDeviceIdLow 1.3.6.1.4.1.795.14.1.411.1.1.8
Unique enclosure ID obtained from inquiry (least significant 32 bits of 64 bit value).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausEnclosureDeviceIdHigh 1.3.6.1.4.1.795.14.1.411.1.1.9
Unique enclosure ID obtained from inquiry (most significant 32 bits of 64 bit value).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausEnclosureDeviceStandardRevision 1.3.6.1.4.1.795.14.1.411.1.1.10
Revision of standard adhered to for this enclosure (obtained from inquiry).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ausEnclosureDevicePowerOnTime 1.3.6.1.4.1.795.14.1.411.1.1.11
Total number of power on minutes for this enclosure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausEnclosureDevicePowerCycles 1.3.6.1.4.1.795.14.1.411.1.1.12
Total number of power cycles for this enclosure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausEnclosureDeviceDoorLock 1.3.6.1.4.1.795.14.1.411.1.1.13
Presence and current status of this enclosure's door lock.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OptionStatus  

ausEnclosureDeviceSpeaker 1.3.6.1.4.1.795.14.1.411.1.1.14
Presence and current status of this enclosure's speaker.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OptionStatus  

ausEnclosureDeviceTemperatureState 1.3.6.1.4.1.795.14.1.411.1.1.15
Indicates state of internal temperature for this enclosure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), other(2), okay(3), tooHot(4)  

ausEnclosureDeviceMainIndex 1.3.6.1.4.1.795.14.1.411.1.1.16
This is the index into ausDeviceTable of the row that is extended by this row of ausEnclosureDeviceTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausExternalRaidDeviceTable 1.3.6.1.4.1.795.14.1.412.1
A list of external RAID controllers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AusExternalRaidDeviceEntry

ausExternalRaidDeviceEntry 1.3.6.1.4.1.795.14.1.412.1.1
An external RAID controller entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AusExternalRaidDeviceEntry  

ausExternalRaidDeviceIndex 1.3.6.1.4.1.795.14.1.412.1.1.1
A unique index value for each external RAID device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausExternalRaidDeviceDescription 1.3.6.1.4.1.795.14.1.412.1.1.2
Free form text for additional description of the external RAID controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ausExternalRaidDeviceNumberOfChannels 1.3.6.1.4.1.795.14.1.412.1.1.3
The number of back-end channels present on this external RAID controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausExternalRaidDeviceInstalledMemory 1.3.6.1.4.1.795.14.1.412.1.1.4
Installed memory in this external RAID controller in megabytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausExternalRaidDeviceAudibleAlarmStatus 1.3.6.1.4.1.795.14.1.412.1.1.5
Status of audible alarm for this external RAID controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OptionStatus  

ausExternalRaidDeviceBatteryStatus 1.3.6.1.4.1.795.14.1.412.1.1.6
Status of battery for this external RAID controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  BatteryStatus  

ausExternalRaidDeviceMainIndex 1.3.6.1.4.1.795.14.1.412.1.1.7
This is the index into ausDeviceTable of the row that is extended by this row of ausExternalRaidDeviceTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausOtherDeviceTable 1.3.6.1.4.1.795.14.1.499.1
A list of other devices.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AusOtherDeviceEntry

ausOtherDeviceEntry 1.3.6.1.4.1.795.14.1.499.1.1
An other device entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AusOtherDeviceEntry  

ausOtherDeviceIndex 1.3.6.1.4.1.795.14.1.499.1.1.1
A unique index value for each other device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausOtherDeviceDescription 1.3.6.1.4.1.795.14.1.499.1.1.2
Free form text for additional description of this device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ausOtherDeviceMainIndex 1.3.6.1.4.1.795.14.1.499.1.1.3
This is the index into ausDeviceTable of the row that is extended by this row of ausOtherDeviceTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausEnclosureFanTable 1.3.6.1.4.1.795.14.1.500.1
A list of enclosure fans.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AusEnclosureFanEntry

ausEnclosureFanEntry 1.3.6.1.4.1.795.14.1.500.1.1
An enclosure fan entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AusEnclosureFanEntry  

ausEnclosureFanIndex 1.3.6.1.4.1.795.14.1.500.1.1.1
A unique index value for each fan.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausEnclosureFanAusEnclosureDeviceIndex 1.3.6.1.4.1.795.14.1.500.1.1.2
The index of the ausEnclosureDeviceTable entry housing this fan.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausEnclosureFanOrdinal 1.3.6.1.4.1.795.14.1.500.1.1.3
Zero-relative fan number within an enclosure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausEnclosureFanSpeed 1.3.6.1.4.1.795.14.1.500.1.1.4
Rotational speed of this fan in RPM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausEnclosureFanStatus 1.3.6.1.4.1.795.14.1.500.1.1.5
Status of this fan.
Status: mandatory Access: read-only
OBJECT-TYPE    
  ObjectStatus  

ausEnclosurePowerSupplyTable 1.3.6.1.4.1.795.14.1.501.1
A list of enclosure power supplies.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AusEnclosurePowerSupplyEntry

ausEnclosurePowerSupplyEntry 1.3.6.1.4.1.795.14.1.501.1.1
An enclosure power supply entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AusEnclosurePowerSupplyEntry  

ausEnclosurePowerSupplyIndex 1.3.6.1.4.1.795.14.1.501.1.1.1
A unique index value for each power supply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausEnclosurePowerSupplyAusEnclosureDeviceIndex 1.3.6.1.4.1.795.14.1.501.1.1.2
The index of the ausEnclosureDeviceTable entry housing this power supply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausEnclosurePowerSupplyOrdinal 1.3.6.1.4.1.795.14.1.501.1.1.3
Zero-relative power supply number within an enclosure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausEnclosurePowerSupplyStatus 1.3.6.1.4.1.795.14.1.501.1.1.4
Status of this power supply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), other(2), operationalAndOn(3), operationalAndOff(4), onAndMalfunctioning(5), offAndMalfunctioning(6), installed(7), notInstalled(8)  

ausEnclosureTemperatureSensorTable 1.3.6.1.4.1.795.14.1.502.1
A list of enclosure temperature sensors.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AusEnclosureTemperatureSensorEntry

ausEnclosureTemperatureSensorEntry 1.3.6.1.4.1.795.14.1.502.1.1
An enclosure temperature sensor entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AusEnclosureTemperatureSensorEntry  

ausEnclosureTemperatureSensorIndex 1.3.6.1.4.1.795.14.1.502.1.1.1
A unique index value for each temperature sensor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausEnclosureTemperatureSensorAusEnclosureDeviceIndex 1.3.6.1.4.1.795.14.1.502.1.1.2
The index of the ausEnclosureDeviceTable entry housing this temperature sensor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausEnclosureTemperatureSensorOrdinal 1.3.6.1.4.1.795.14.1.502.1.1.3
Zero-relative temperature sensor number within an enclosure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausEnclosureTemperatureSensorOverTemperature 1.3.6.1.4.1.795.14.1.502.1.1.4
Specifies whether this temperature sensor has detected an over temperature condition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  ObjectStatus  

ausEnclosureTemperatureSensorDegrees 1.3.6.1.4.1.795.14.1.502.1.1.5
Temperature registered by this sensor in degrees Fahrenheit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausEnclosureSlotTable 1.3.6.1.4.1.795.14.1.503.1
A list of enclosure slots.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AusEnclosureSlotEntry

ausEnclosureSlotEntry 1.3.6.1.4.1.795.14.1.503.1.1
An enclosure slot entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AusEnclosureSlotEntry  

ausEnclosureSlotIndex 1.3.6.1.4.1.795.14.1.503.1.1.1
A unique index value for each slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausEnclosureSlotAusEnclosureDeviceIndex 1.3.6.1.4.1.795.14.1.503.1.1.2
The index of the ausEnclosureDeviceTable entry housing this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausEnclosureSlotOrdinal 1.3.6.1.4.1.795.14.1.503.1.1.3
Zero-relative slot number within an enclosure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausEnclosureSlotPortId 1.3.6.1.4.1.795.14.1.503.1.1.4
Port ID number used by the device at this slot. Meaning is dependent on channel type. For example, SCSI channels would report device SCSI ID in this field. The field is a string to allow for a wide range of addressing schemes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ausEnclosureSlotInsertions 1.3.6.1.4.1.795.14.1.503.1.1.5
Number of device insertions for this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausArrayTable 1.3.6.1.4.1.795.14.1.1000.1
A list of arrays.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AusArrayEntry

ausArrayEntry 1.3.6.1.4.1.795.14.1.1000.1.1
An array entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AusArrayEntry  

ausArrayIndex 1.3.6.1.4.1.795.14.1.1000.1.1.1
A unique index value for each array beginning with 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausArrayName 1.3.6.1.4.1.795.14.1.1000.1.1.2
The name assigned to this array.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ausArrayCapacity 1.3.6.1.4.1.795.14.1.1000.1.1.3
Capacity of this array in megabytes. This is data (usable) size, not the sum of all extents.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausArrayType 1.3.6.1.4.1.795.14.1.1000.1.1.4
RAID level used by this array.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), other(2), raid0(3), raid1(4), raid2(5), raid3(6), raid4(7), raid5(8), raid6(9), raid10(10), raid50(11), volume(12), volume-of-raid0(13), volume-of-raid1(14), volume-of-raid5(15), raid1e(16), raid5ee(17), raid-volume(18), raid60(19)  

ausArrayStripeSize 1.3.6.1.4.1.795.14.1.1000.1.1.5
Stripe size used by this array.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausArrayTaskStatus 1.3.6.1.4.1.795.14.1.1000.1.1.6
Task status of this array.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), other(2), noTaskActive(3), reconstruct(4), zeroInitialize(5), verify(6), verifyWithFix(7), modification(8), copyback(9), compaction(10), expansion(11), snapshotBackup(12)  

ausArrayTaskCompletion 1.3.6.1.4.1.795.14.1.1000.1.1.7
Percentage completion of running task, if any. Reports as 100 if no task is active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..100  

ausArrayTaskPriority 1.3.6.1.4.1.795.14.1.1000.1.1.8
Priority of the running task (if any).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), other(2), notSupported(3), notApplicable(4), none(5), low(6), medium(7), high(8)  

ausArrayHostingControllerType 1.3.6.1.4.1.795.14.1.1000.1.1.9
This field tells whether the hosting controller for this array is an actual physical controller, an aggregate controller (multiple controllers made to look like one through software), or an external RAID controller. This field is used to select the meaning of the following ausArrayControllerIndex field.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER physicalController(1), aggregateController(2), externalRaidController(3)  

ausArrayHostingControllerIndex 1.3.6.1.4.1.795.14.1.1000.1.1.10
This field associates this array with its hosting controller. if the ausArrayControllerType field equals physicalController, then this field is an index into the ausController table. If the ausArrayControllerType field equals aggregateController, then this field is an index into the ausAggregateController table. If the ausArrayControllerType field equal externalRaidController, then this field is an index into the ausExternalRaidDevice table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausArrayStatus 1.3.6.1.4.1.795.14.1.1000.1.1.11
Current health of this array.
Status: mandatory Access: read-only
OBJECT-TYPE    
  ObjectStatus  

ausArrayState 1.3.6.1.4.1.795.14.1.1000.1.1.12
Current health of this array.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), other(2), optimal(3), quickInited(4), impacted(5), degraded(6), failed(7), compacted(8)  

ausArrayCacheStatus 1.3.6.1.4.1.795.14.1.1000.1.1.13
Current write cache status of this array.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), other(2), disabled(3), writeBack(4), writeThru(5)  

ausArrayMembership 1.3.6.1.4.1.795.14.1.1000.1.1.14
For non-composite arrays (e.g., a straight mirror, RAID-1, set) this field is always 0. For composite arrays (e.g. stripe set of mirrors, RAID-10) this field indicates the position in the array hierarchy. If this is the topmost array in the hierarchy, this field will be 0. If this is a subordinate array in the hierarchy, this field is set to a value equal to the index of the entry in the Array Table locating its parent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausArrayID 1.3.6.1.4.1.795.14.1.1000.1.1.15
The ID of this array on its hosting controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausArrayPMStatus 1.3.6.1.4.1.795.14.1.1000.1.1.16
Power Management Status for the Logical Drive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

ausStandByTimer 1.3.6.1.4.1.795.14.1.1000.1.1.17
Period of inactivity, from 3 minutes to 3 hours, after which the drives spin rate is lowered. The default is zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausPowerOffTimer 1.3.6.1.4.1.795.14.1.1000.1.1.18
Period of inactivity, from 3 minutes to 3 hours, after which the disk drives are turned off. The default is zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausVerifyTimer 1.3.6.1.4.1.795.14.1.1000.1.1.19
Period of inactivity, from 1 hour to 24 hours. after which an inactive drive (a drive that is already powered down) is restarted and checked to verify its health. Once the check is completed, the drive is powered down and returns to its inactive state. The default is zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausArrayMaxCachePreferredCacheSetting 1.3.6.1.4.1.795.14.1.1000.1.1.20
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notsupported(0), disabled(1), enabled(2)  

ausArrayMaxCacheSetting 1.3.6.1.4.1.795.14.1.1000.1.1.21
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notsupported(0), disabled(1), enabled(2)  

ausExtentTable 1.3.6.1.4.1.795.14.1.1001.1
A list of disk extents.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AusExtentEntry

ausExtentEntry 1.3.6.1.4.1.795.14.1.1001.1.1
A disk extent entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AusExtentEntry  

ausExtentIndex 1.3.6.1.4.1.795.14.1.1001.1.1.1
A unique index value for each disk extent beginning with 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausExtentAusDeviceIndex 1.3.6.1.4.1.795.14.1.1001.1.1.2
Index into the Adaptec Universal Storage device table that describes the physical disk containing this extent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausExtentSize 1.3.6.1.4.1.795.14.1.1001.1.1.3
Size of this extent rounded to nearest megabyte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausExtentStartingLBALow 1.3.6.1.4.1.795.14.1.1001.1.1.4
Starting disk LBA (logical buffer address) used by this extent (least significant 32 bits of 64 bit value).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausExtentStartingLBAHigh 1.3.6.1.4.1.795.14.1.1001.1.1.5
Starting disk LBA (logical buffer address) used by this extent (most significant 32 bits of 64 bit value).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausExtentNumberOfBlocksLow 1.3.6.1.4.1.795.14.1.1001.1.1.6
Number of disk blocks used by this extent (least significant 32 bits of 64 bit value).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausExtentNumberOfBlocksHigh 1.3.6.1.4.1.795.14.1.1001.1.1.7
Number of disk blocks used by this extent (most significant 32 bits of 64 bit value).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausExtentArrayMembership 1.3.6.1.4.1.795.14.1.1001.1.1.8
Index into the Adaptec Universal Storage array table selecting the array of which this extent is a member.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausSpareTable 1.3.6.1.4.1.795.14.1.1002.1
A list of spares.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AusSpareEntry

ausSpareEntry 1.3.6.1.4.1.795.14.1.1002.1.1
A spare entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AusSpareEntry  

ausSpareIndex 1.3.6.1.4.1.795.14.1.1002.1.1.1
A unique index value for each spare beginning with 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausSpareAusDeviceIndex 1.3.6.1.4.1.795.14.1.1002.1.1.2
Index into the Adaptec Universal Storage device table that describes the physical disk corresponding to this spare.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausSpareType 1.3.6.1.4.1.795.14.1.1002.1.1.3
Specifies whether this is a global spare (allocated to a controller), a dedicated spare (allocated to an array), an external RAID global spare (allocated to an external RAID controller), or a standby spare (allocated to a controller).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER global(1), dedicated(2), externalRaidGlobal(3), unknown(4), other(5), standby(6)  

ausSpareAusControllerOrArrayIndex 1.3.6.1.4.1.795.14.1.1002.1.1.4
If this is a global spare, this field contains an index into the Adaptec Universal Storage controller table selecting the controller for which the spare relationship exists. If this is a dedicated spare, this field contains an index into the Adaptec Universal Storage array table selecting the array for which the spare relationship exists. If this is an external RAID global spare, this field contains an index into the Adaptec Universal Storage external RAID device table selecting the controller for which the spare relationship exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausEventLogNumEntries 1.3.6.1.4.1.795.14.1.2000.1
The number of entries in the Event Log.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausEventLogTable 1.3.6.1.4.1.795.14.1.2001.1
A circular list of event log entries. The number of entries is given by the value of eventLogCount. Current maximum event log count is fixed at 256, but could be programmable (via MIB variable and/or .INI file) in the future.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AusEventLogEntry

ausEventLogEntry 1.3.6.1.4.1.795.14.1.2001.1.1
An event log entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AusEventLogEntry  

ausEventLogTimeStamp 1.3.6.1.4.1.795.14.1.2001.1.1.1
The time stamp assigned this event by middleware, in UNIX time_t format.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ausEventLogString 1.3.6.1.4.1.795.14.1.2001.1.1.2
A text string containing the text of the event as generated by middleware.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ausEventType 1.3.6.1.4.1.795.14.1.2001.1.1.3
A text string containing the type of the event as generated by middleware.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ausEvenCode 1.3.6.1.4.1.795.14.1.2001.1.1.4
A value containing the code of the event as generated by middleware.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ausTrapObjects 1.3.6.1.4.1.795.14.1.9000
OBJECT IDENTIFIER    

ausTrapMessage 1.3.6.1.4.1.795.14.1.9000.1
Message delivered by the trap.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString  

ausTrapObjectIndex 1.3.6.1.4.1.795.14.1.9000.2
An index into a MIB table specifying the object associated with the trap. If the index is 0, then an index is not available (for example, for a deleted object).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

ausTrapControllerType 1.3.6.1.4.1.795.14.1.9000.3
Describes which type of controller generated this trap, and therefore which table is indexed.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER aggregateController(1), internalController(2), externalController(3)  

ausTrapControllerStatus 1.3.6.1.4.1.795.14.1.9000.4
Status of the controller that generated this trap.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER okay(1), noControllersFound(2), controllerAdded(3), controllerDeleted(4), controllerFailover(5), commandsNotResponding(6), cannotReadControllerInformation(7), replaceBattery(8), defectiveCache(9), firmwareVersionMismatch(10)  

ausTrapDeviceStatus 1.3.6.1.4.1.795.14.1.9000.5
Status of the device that generated this trap.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER okay(1), deviceAdded(2), deviceRemoved(3), deviceFailed(4), smartEvent(5), unsupportedDeviceType(6)  

ausTrapEnclosureStatus 1.3.6.1.4.1.795.14.1.9000.6
Status of the enclosure that generated this trap.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER enclosureResponding(1), enclosureNotResponding(2), fanMalfunction(3), fanOperational(4), fanRemoved(5), fanInstalled(6), temperatureInRange(7), temperatureOutOfRange(8), powerSupplyMalfunction(9), powerSupplyOperational(10), powerSupplyRemoved(11), powerSupplyInstalled(12)  

ausTrapEnclosureObjectOrdinal 1.3.6.1.4.1.795.14.1.9000.7
Zero relative ordinal number of affected fan, temperature sensor, power supply, slot, etc., in an enclosure. Field will be -1 if not needed (for example, when the trap refers to the enclosure as a whole rather than a piece of the enclosure).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

ausTrapArrayStatus 1.3.6.1.4.1.795.14.1.9000.8
Status of the array that generated this trap.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER okay(1), critical(2), offline(3), blocked(4), unblocked(5)  

ausTrapArrayTaskStatus 1.3.6.1.4.1.795.14.1.9000.9
Status of the array task that generated this trap.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER rebuilding(1), rebuildComplete(2), rebuildFailed(3), synchronizing(4), synchronizationComplete(5), synchronizationFailed(6), migrating(7), migrationComplete(8), migrationFailed(9), compressing(10), compressionComplete(11), compressionFailed(12), decompressing(13), decompressionComplete(14), decompressionFailed(15), compacting(16), compactionComplete(17), compactionFailed(18), expanding(19), expansionComplete(20), expansionFailed(21), flashCopying(22), flashCopyComplete(23), flashCopyFailed(24)  

ausTrapSpareStatus 1.3.6.1.4.1.795.14.1.9000.10
Status of the spare that generated this trap.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER okay(1), added(2), deleted(3), failed(4)  

ausTrapEnumAsText 1.3.6.1.4.1.795.14.1.9000.11
A string corresponding to a trap enumeration value.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString  

ausTrapOtherInformational 1001
Other informational trap message
TRAP-TYPE    

ausTrapOtherWarning 1002
Other warning trap message
TRAP-TYPE    

ausTrapOtherFatal 1003
Other fatal trap message
TRAP-TYPE    

ausTrapDeviceInformation 1010
Informational status of a device
TRAP-TYPE    

ausTrapDeviceWarning 1011
Warning status of a device
TRAP-TYPE    

ausTrapDeviceFatal 1012
Fatal status of a device
TRAP-TYPE    

ausTrapEnclosureInformation 1020
Informational status of an enclosure
TRAP-TYPE    

ausTrapEnclosureWarning 1021
Warning status of an enclosure
TRAP-TYPE    

ausTrapEnclosureFatal 1022
Fatal status of an enclosure
TRAP-TYPE    

ausTrapArrayInformation 1030
Informational status of an array
TRAP-TYPE    

ausTrapArrayWarning 1031
Warning status of an array
TRAP-TYPE    

ausTrapArrayFatal 1032
Fatal status of an array
TRAP-TYPE    

ausTrapArrayTaskInformation 1040
Informational status of an array task
TRAP-TYPE    

ausTrapArrayTaskWarning 1041
Warning status of an array task
TRAP-TYPE    

ausTrapArrayTaskFatal 1042
Fatal status of an array task
TRAP-TYPE    

ausTrapSpareInformation 1050
Informational status of a spare
TRAP-TYPE    

ausTrapSpareWarning 1051
Warning status of a spare
TRAP-TYPE    

ausTrapSpareFatal 1052
Fatal status of a spare
TRAP-TYPE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor