ACD-PAA-MIB

File: ACD-PAA-MIB.mib (101363 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
ACCEDIAN-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE IpAddress
Integer32 Unsigned32 DisplayString
TruthValue MacAddress DateAndTime
MODULE-COMPLIANCE OBJECT-GROUP acdMibs

Defined Types

AcdPaaResultEntry  
SEQUENCE    
  acdPaaResultID Unsigned32
  acdPaaResultState INTEGER
  acdPaaResultPktLossNeCurrValid TruthValue
  acdPaaResultPktLossNeCurrValue Unsigned32
  acdPaaResultPktLossNePrevValid TruthValue
  acdPaaResultPktLossNePrevValue Unsigned32
  acdPaaResultPktLossFeCurrValid TruthValue
  acdPaaResultPktLossFeCurrValue Unsigned32
  acdPaaResultPktLossFePrevValid TruthValue
  acdPaaResultPktLossFePrevValue Unsigned32
  acdPaaResultOneWayDvInstValue Integer32
  acdPaaResultOneWayDvCurrValid TruthValue
  acdPaaResultOneWayDvCurrMinValue Integer32
  acdPaaResultOneWayDvCurrMaxValue Integer32
  acdPaaResultOneWayDvCurrAvgValue Integer32
  acdPaaResultOneWayDvCurrThreshExc Unsigned32
  acdPaaResultOneWayDvPrevValid TruthValue
  acdPaaResultOneWayDvPrevMinValue Integer32
  acdPaaResultOneWayDvPrevMaxValue Integer32
  acdPaaResultOneWayDvPrevAvgValue Integer32
  acdPaaResultOneWayDvPrevThreshEx Unsigned32
  acdPaaResultTwoWayDelayInstValue Integer32
  acdPaaResultTwoWayDelayCurrValid TruthValue
  acdPaaResultTwoWayDelayCurrMinValue Integer32
  acdPaaResultTwoWayDelayCurrMaxValue Integer32
  acdPaaResultTwoWayDelayCurrAvgValue Integer32
  acdPaaResultTwoWayDelayCurrThreshEx Unsigned32
  acdPaaResultTwoWayDelayPrevValid TruthValue
  acdPaaResultTwoWayDelayPrevMinValue Integer32
  acdPaaResultTwoWayDelayPrevMaxValue Integer32
  acdPaaResultTwoWayDelayPrevAvgValue Integer32
  acdPaaResultTwoWayDelayPrevThreshEx Unsigned32
  acdPaaResultTwoWayDvInstValue Integer32
  acdPaaResultTwoWayDvCurrValid TruthValue
  acdPaaResultTwoWayDvCurrMinValue Integer32
  acdPaaResultTwoWayDvCurrMaxValue Integer32
  acdPaaResultTwoWayDvCurrAvgValue Integer32
  acdPaaResultTwoWayDvCurrThreshEx Unsigned32
  acdPaaResultTwoWayDvPrevValid TruthValue
  acdPaaResultTwoWayDvPrevMinValue Integer32
  acdPaaResultTwoWayDvPrevMaxValue Integer32
  acdPaaResultTwoWayDvPrevAvgValue Integer32
  acdPaaResultTwoWayDvPrevThreshEx Unsigned32
  acdPaaResultOneWayDelayInstValue Integer32
  acdPaaResultOneWayDelayCurrValid TruthValue
  acdPaaResultOneWayDelayCurrMinValue Integer32
  acdPaaResultOneWayDelayCurrMaxValue Integer32
  acdPaaResultOneWayDelayCurrAvgValue Integer32
  acdPaaResultOneWayDelayCurrThreshEx Unsigned32
  acdPaaResultOneWayDelayPrevValid TruthValue
  acdPaaResultOneWayDelayPrevMinValue Integer32
  acdPaaResultOneWayDelayPrevMaxValue Integer32
  acdPaaResultOneWayDelayPrevAvgValue Integer32
  acdPaaResultOneWayDelayPrevThreshEx Unsigned32
  acdPaaResultPktLossTime DateAndTime
  acdPaaResultOneWayTime DateAndTime
  acdPaaResultTwoWayTime DateAndTime
  acdPaaResultPktLossNeCurrSamples Unsigned32
  acdPaaResultPktLossNePrevSamples Unsigned32
  acdPaaResultPktLossFeCurrSamples Unsigned32
  acdPaaResultPktLossFePrevSamples Unsigned32
  acdPaaResultOneWayDelayCurrSamples Unsigned32
  acdPaaResultOneWayDelayPrevSamples Unsigned32
  acdPaaResultOneWayDvCurrSamples Unsigned32
  acdPaaResultOneWayDvPrevSamples Unsigned32
  acdPaaResultTwoWayDelayCurrSamples Unsigned32
  acdPaaResultTwoWayDelayPrevSamples Unsigned32
  acdPaaResultTwoWayDvCurrSamples Unsigned32
  acdPaaResultTwoWayDvPrevSamples Unsigned32
  acdPaaResultIgmpJoinDelayInstValue Integer32
  acdPaaResultIgmpJoinDelayCurrValid TruthValue
  acdPaaResultIgmpJoinDelayCurrMinValue Integer32
  acdPaaResultIgmpJoinDelayCurrMaxValue Integer32
  acdPaaResultIgmpJoinDelayCurrAvgValue Integer32
  acdPaaResultIgmpJoinDelayCurrThreshEx Unsigned32
  acdPaaResultIgmpJoinDelayPrevValid TruthValue
  acdPaaResultIgmpJoinDelayPrevMinValue Integer32
  acdPaaResultIgmpJoinDelayPrevMaxValue Integer32
  acdPaaResultIgmpJoinDelayPrevAvgValue Integer32
  acdPaaResultIgmpJoinDelayPrevThreshEx Unsigned32
  acdPaaResultIgmpLeaveDelayInstValue Integer32
  acdPaaResultIgmpLeaveDelayCurrValid TruthValue
  acdPaaResultIgmpLeaveDelayCurrMinValue Integer32
  acdPaaResultIgmpLeaveDelayCurrMaxValue Integer32
  acdPaaResultIgmpLeaveDelayCurrAvgValue Integer32
  acdPaaResultIgmpLeaveDelayCurrThreshEx Unsigned32
  acdPaaResultIgmpLeaveDelayPrevValid TruthValue
  acdPaaResultIgmpLeaveDelayPrevMinValue Integer32
  acdPaaResultIgmpLeaveDelayPrevMaxValue Integer32
  acdPaaResultIgmpLeaveDelayPrevAvgValue Integer32
  acdPaaResultIgmpLeaveDelayPrevThreshEx Unsigned32
  acdPaaResultIgmpJoinDelayTime DateAndTime
  acdPaaResultIgmpLeaveDelayTime DateAndTime
  acdPaaResultIgmpJoinDelayCurrSamples Unsigned32
  acdPaaResultIgmpJoinDelayPrevSamples Unsigned32
  acdPaaResultIgmpLeaveDelayCurrSamples Unsigned32
  acdPaaResultIgmpLeaveDelayPrevSamples Unsigned32
  acdPaaResultPktLossCurrGaps Unsigned32
  acdPaaResultPktLossPrevGaps Unsigned32
  acdPaaResultPktLossCurrLargestGap Unsigned32
  acdPaaResultPktLossPrevLargestGap Unsigned32
  acdPaaResultPktLossNeCurrValueExt Unsigned32
  acdPaaResultPktLossNePrevValueExt Unsigned32
  acdPaaResultPktLossFeCurrValueExt Unsigned32
  acdPaaResultPktLossFePrevValueExt Unsigned32
  acdPaaResultPktLossNeCurrNbrLoss Unsigned32
  acdPaaResultPktLossNePrevNbrLoss Unsigned32
  acdPaaResultPktLossFeCurrNbrLoss Unsigned32
  acdPaaResultPktLossFePrevNbrLoss Unsigned32

AcdPaaStatusEntry  
SEQUENCE    
  acdPaaStatusID Unsigned32
  acdPaaStatusCcAlert TruthValue
  acdPaaStatusPktLossAlert TruthValue
  acdPaaStatusOneWayDvAlert TruthValue
  acdPaaStatusOneWayAvgDvAlert TruthValue
  acdPaaStatusTwoWayDelayAlert TruthValue
  acdPaaStatusTwoWayAvgDelayAlert TruthValue
  acdPaaStatusTwoWayDvAlert TruthValue
  acdPaaStatusTwoWayAvgDvAlert TruthValue
  acdPaaStatusOneWayDelayAlert TruthValue
  acdPaaStatusOneWayAvgDelayAlert TruthValue
  acdPaaStatusState INTEGER
  acdPaaStatusPeerAddress DisplayString

AcdPaaUdpCfgEntry  
SEQUENCE    
  acdPaaUdpCfgID Unsigned32
  acdPaaUdpCfgName DisplayString
  acdPaaUdpCfgState INTEGER
  acdPaaUdpCfgPktSize Unsigned32
  acdPaaUdpCfgSamplingPeriod Unsigned32
  acdPaaUdpCfgCcLossThresh Unsigned32
  acdPaaUdpCfgPktLossRefPeriod Unsigned32
  acdPaaUdpCfgPktLossThresh Unsigned32
  acdPaaUdpCfgOneWayRefPeriod Unsigned32
  acdPaaUdpCfgOneWayDvMax Unsigned32
  acdPaaUdpCfgOneWayDvThresh Unsigned32
  acdPaaUdpCfgOneWayAvgDvThresh Unsigned32
  acdPaaUdpCfgTwoWayRefPeriod Unsigned32
  acdPaaUdpCfgTwoWayDelayMax Unsigned32
  acdPaaUdpCfgTwoWayDelayThresh Unsigned32
  acdPaaUdpCfgTwoWayAvgDelayThresh Unsigned32
  acdPaaUdpCfgTwoWayDvMax Unsigned32
  acdPaaUdpCfgTwoWayDvThresh Unsigned32
  acdPaaUdpCfgTwoWayAvgDvThresh Unsigned32
  acdPaaUdpCfgIPv4DstAddr IpAddress
  acdPaaUdpCfgPortNumber Unsigned32
  acdPaaUdpCfgDscpValue Unsigned32
  acdPaaUdpCfgVlan1PbitsValue Unsigned32
  acdPaaUdpCfgVlan2PbitsValue Unsigned32
  acdPaaUdpCfgOneWayDelayMax Unsigned32
  acdPaaUdpCfgOneWayDelayThresh Unsigned32
  acdPaaUdpCfgOneWayAvgDelayThresh Unsigned32
  acdPaaUdpCfgDestinationPortNumber Unsigned32
  acdPaaUdpCfgPeerID Unsigned32
  acdPaaUdpCfgOperationMode Unsigned32
  acdPaaUdpCfgIgmpOneWayJoinPeriod Unsigned32
  acdPaaUdpCfgIgmpRefPeriod Unsigned32
  acdPaaUdpCfgIgmpMaxJoinDly Unsigned32
  acdPaaUdpCfgIgmpJoinDlyThres Unsigned32
  acdPaaUdpCfgIgmpJoinAvgDlyThres Unsigned32
  acdPaaUdpCfgIgmpMaxLvDly Unsigned32
  acdPaaUdpCfgIgmpLvDlyThresh Unsigned32
  acdPaaUdpCfgIgmpLvAvgDlyThresh Unsigned32
  acdPaaUdpCfgPktLossThreshExt Unsigned32

AcdPaaL2CfgEntry  
SEQUENCE    
  acdPaaL2CfgID Unsigned32
  acdPaaL2CfgName DisplayString
  acdPaaL2CfgState INTEGER
  acdPaaL2CfgPktSize Unsigned32
  acdPaaL2CfgSamplingPeriod Unsigned32
  acdPaaL2CfgCcLossThresh Unsigned32
  acdPaaL2CfgPktLossRefPeriod Unsigned32
  acdPaaL2CfgPktLossThresh Unsigned32
  acdPaaL2CfgOneWayRefPeriod Unsigned32
  acdPaaL2CfgOneWayDvMax Unsigned32
  acdPaaL2CfgOneWayDvThresh Unsigned32
  acdPaaL2CfgOneWayAvgDvThresh Unsigned32
  acdPaaL2CfgTwoWayRefPeriod Unsigned32
  acdPaaL2CfgTwoWayDelayMax Unsigned32
  acdPaaL2CfgTwoWayDelayThresh Unsigned32
  acdPaaL2CfgTwoWayAvgDelayThresh Unsigned32
  acdPaaL2CfgTwoWayDvMax Unsigned32
  acdPaaL2CfgTwoWayDvThresh Unsigned32
  acdPaaL2CfgTwoWayAvgDvThresh Unsigned32
  acdPaaL2CfgPortName DisplayString
  acdPaaL2CfgMacDst MacAddress
  acdPaaL2CfgEtype Unsigned32
  acdPaaL2CfgVlan1IdEn TruthValue
  acdPaaL2CfgVlan1Id Unsigned32
  acdPaaL2CfgVlan2IdEn TruthValue
  acdPaaL2CfgVlan2Id Unsigned32
  acdPaaL2CfgVlan1PbitsValue Unsigned32
  acdPaaL2CfgVlan2PbitsValue Unsigned32
  acdPaaL2CfgOneWayDelayMax Unsigned32
  acdPaaL2CfgOneWayDelayThresh Unsigned32
  acdPaaL2CfgOneWayAvgDelayThresh Unsigned32
  acdPaaL2CfgPeerID Unsigned32
  acdPaaL2CfgOperationMode Unsigned32
  acdPaaL2CfgPktLossThreshExt Unsigned32

AcdPaaHistResultEntry  
SEQUENCE    
  acdPaaHistResultID Unsigned32
  acdPaaHistResultSampleIndex Unsigned32
  acdPaaHistResultStatus INTEGER
  acdPaaHistResultDuration Unsigned32
  acdPaaHistResultIntervalEnd DateAndTime
  acdPaaHistResultPktLossNeValid TruthValue
  acdPaaHistResultPktLossNeSamples Unsigned32
  acdPaaHistResultPktLossNeValue Unsigned32
  acdPaaHistResultPktLossFeValid TruthValue
  acdPaaHistResultPktLossFeSamples Unsigned32
  acdPaaHistResultPktLossFeValue Unsigned32
  acdPaaHistResultOneWayDelayValid TruthValue
  acdPaaHistResultOneWayDelaySamples Unsigned32
  acdPaaHistResultOneWayDelayMinValue Integer32
  acdPaaHistResultOneWayDelayMaxValue Integer32
  acdPaaHistResultOneWayDelayAvgValue Integer32
  acdPaaHistResultOneWayDelayThreshEx Unsigned32
  acdPaaHistResultOneWayDvValid TruthValue
  acdPaaHistResultOneWayDvSamples Unsigned32
  acdPaaHistResultOneWayDvMinValue Integer32
  acdPaaHistResultOneWayDvMaxValue Integer32
  acdPaaHistResultOneWayDvAvgValue Integer32
  acdPaaHistResultOneWayDvThreshEx Unsigned32
  acdPaaHistResultTwoWayDelayValid TruthValue
  acdPaaHistResultTwoWayDelaySamples Unsigned32
  acdPaaHistResultTwoWayDelayMinValue Integer32
  acdPaaHistResultTwoWayDelayMaxValue Integer32
  acdPaaHistResultTwoWayDelayAvgValue Integer32
  acdPaaHistResultTwoWayDelayThreshEx Unsigned32
  acdPaaHistResultTwoWayDvValid TruthValue
  acdPaaHistResultTwoWayDvSamples Unsigned32
  acdPaaHistResultTwoWayDvMinValue Integer32
  acdPaaHistResultTwoWayDvMaxValue Integer32
  acdPaaHistResultTwoWayDvAvgValue Integer32
  acdPaaHistResultTwoWayDvThreshEx Unsigned32
  acdPaaHistResultIgmpJoinDelayValid TruthValue
  acdPaaHistResultIgmpJoinDelaySamples Unsigned32
  acdPaaHistResultIgmpJoinDelayMinValue Integer32
  acdPaaHistResultIgmpJoinDelayMaxValue Integer32
  acdPaaHistResultIgmpJoinDelayAvgValue Integer32
  acdPaaHistResultIgmpJoinDelayThreshEx Unsigned32
  acdPaaHistResultIgmpLeaveDelayValid TruthValue
  acdPaaHistResultIgmpLeaveDelaySamples Unsigned32
  acdPaaHistResultIgmpLeaveDelayMinValue Integer32
  acdPaaHistResultIgmpLeaveDelayMaxValue Integer32
  acdPaaHistResultIgmpLeaveDelayAvgValue Integer32
  acdPaaHistResultIgmpLeaveDelayThreshEx Unsigned32
  acdPaaHistResultPktLossNeValueExt Unsigned32
  acdPaaHistResultPktLossFeValueExt Unsigned32
  acdPaaHistResultPktLossNeNbrLoss Unsigned32
  acdPaaHistResultPktLossFeNbrLoss Unsigned32

Defined Values

acdPaa 1.3.6.1.4.1.22420.2.5
PAA database for this Accedian Networks device.
MODULE-IDENTITY    

acdPaaNotifications 1.3.6.1.4.1.22420.2.5.7
OBJECT IDENTIFIER    

acdPaaMIBObjects 1.3.6.1.4.1.22420.2.5.8
OBJECT IDENTIFIER    

acdPaaConformance 1.3.6.1.4.1.22420.2.5.9
OBJECT IDENTIFIER    

acdPaaResultTable 1.3.6.1.4.1.22420.2.5.1
Result table of all Paa entries
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcdPaaResultEntry

acdPaaResultEntry 1.3.6.1.4.1.22420.2.5.1.1
An entry consisting of results for a PAA instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcdPaaResultEntry  

acdPaaResultID 1.3.6.1.4.1.22420.2.5.1.1.1
Unique value for each PAA instance. Its value ranges from 1 to MAXINT (4 bytes).
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

acdPaaResultState 1.3.6.1.4.1.22420.2.5.1.1.2
Indicates the state of the instance.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), associating(1), associated(2), running(3), idle(4), lockedIS(5), lockedOOS(6)  

acdPaaResultPktLossNeCurrValid 1.3.6.1.4.1.22420.2.5.1.1.3
Indicates the validity of the Near-end current packet loss results.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdPaaResultPktLossNeCurrValue 1.3.6.1.4.1.22420.2.5.1.1.4
Indicates the Near-end current packet loss. The packet loss is the percent of packets transmitted but not received of the Ethernet segment in hundredths of a percent (100 is 1%).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..10000  

acdPaaResultPktLossNePrevValid 1.3.6.1.4.1.22420.2.5.1.1.5
Indicates the validity of the Near-end previous packet loss results.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdPaaResultPktLossNePrevValue 1.3.6.1.4.1.22420.2.5.1.1.6
Indicates the Near-end previous packet loss. The packet loss is the percent of packets transmitted but not received of the Ethernet segment in hundredths of a percent (100 is 1%).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..10000  

acdPaaResultPktLossFeCurrValid 1.3.6.1.4.1.22420.2.5.1.1.7
Indicates the validity of the Far-end current packet loss results.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdPaaResultPktLossFeCurrValue 1.3.6.1.4.1.22420.2.5.1.1.8
Indicates the Far-end current packet loss. The packet loss is the percent of packets transmitted but not received of the Ethernet segment in hundredths of a percent (100 is 1%).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..10000  

acdPaaResultPktLossFePrevValid 1.3.6.1.4.1.22420.2.5.1.1.9
Indicates the validity of the Far-end previous packet loss results.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdPaaResultPktLossFePrevValue 1.3.6.1.4.1.22420.2.5.1.1.10
Indicates the Far-end previous packet loss. The packet loss is the percent of packets transmitted but not received of the Ethernet segment in hundredths of a percent (100 is 1%).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..10000  

acdPaaResultOneWayDvInstValue 1.3.6.1.4.1.22420.2.5.1.1.11
Indicates the One-way delay variation instantaneous value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultOneWayDvCurrValid 1.3.6.1.4.1.22420.2.5.1.1.12
Indicates the validity of the current One-way delay variation results.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdPaaResultOneWayDvCurrMinValue 1.3.6.1.4.1.22420.2.5.1.1.13
Indicates the current One-way delay variation minimum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultOneWayDvCurrMaxValue 1.3.6.1.4.1.22420.2.5.1.1.14
Indicates the current One-way delay variation maximum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultOneWayDvCurrAvgValue 1.3.6.1.4.1.22420.2.5.1.1.15
Indicates the current One-way delay variation average value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultOneWayDvCurrThreshExc 1.3.6.1.4.1.22420.2.5.1.1.16
Indicates the current number of samples exceeding the limit.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaResultOneWayDvPrevValid 1.3.6.1.4.1.22420.2.5.1.1.17
Indicates the validity of the previous One-way delay variation results.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdPaaResultOneWayDvPrevMinValue 1.3.6.1.4.1.22420.2.5.1.1.18
Indicates the previous One-way delay variation minimum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultOneWayDvPrevMaxValue 1.3.6.1.4.1.22420.2.5.1.1.19
Indicates the previous One-way delay variation maximum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultOneWayDvPrevAvgValue 1.3.6.1.4.1.22420.2.5.1.1.20
Indicates the previous One-way delay variation average value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultOneWayDvPrevThreshEx 1.3.6.1.4.1.22420.2.5.1.1.21
Indicates the previous number of samples exceeding the limit.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaResultTwoWayDelayInstValue 1.3.6.1.4.1.22420.2.5.1.1.22
Indicates the Two-way delay instantaneous value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultTwoWayDelayCurrValid 1.3.6.1.4.1.22420.2.5.1.1.23
Indicates the validity of the current Two-way delay results.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdPaaResultTwoWayDelayCurrMinValue 1.3.6.1.4.1.22420.2.5.1.1.24
Indicates the current Two-way delay minimum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultTwoWayDelayCurrMaxValue 1.3.6.1.4.1.22420.2.5.1.1.25
Indicates the current Two-way delay maximum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultTwoWayDelayCurrAvgValue 1.3.6.1.4.1.22420.2.5.1.1.26
Indicates the current Two-way delay average value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultTwoWayDelayCurrThreshEx 1.3.6.1.4.1.22420.2.5.1.1.27
Indicates the current number of samples exceeding the limit.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaResultTwoWayDelayPrevValid 1.3.6.1.4.1.22420.2.5.1.1.28
Indicates the validity of the previous Two-way delay results.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdPaaResultTwoWayDelayPrevMinValue 1.3.6.1.4.1.22420.2.5.1.1.29
Indicates the previous Two-way delay minimum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultTwoWayDelayPrevMaxValue 1.3.6.1.4.1.22420.2.5.1.1.30
Indicates the previous Two-way delay maximum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultTwoWayDelayPrevAvgValue 1.3.6.1.4.1.22420.2.5.1.1.31
Indicates the previous Two-way delay average value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultTwoWayDelayPrevThreshEx 1.3.6.1.4.1.22420.2.5.1.1.32
Indicates the previous number of samples exceeding the limit.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaResultTwoWayDvInstValue 1.3.6.1.4.1.22420.2.5.1.1.33
Indicates the Two-way delay variation instantaneous value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultTwoWayDvCurrValid 1.3.6.1.4.1.22420.2.5.1.1.34
Indicates the validity of the current Two-way delay variation results.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdPaaResultTwoWayDvCurrMinValue 1.3.6.1.4.1.22420.2.5.1.1.35
Indicates the current Two-way delay variation minimum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultTwoWayDvCurrMaxValue 1.3.6.1.4.1.22420.2.5.1.1.36
Indicates the current Two-way delay variation maximum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultTwoWayDvCurrAvgValue 1.3.6.1.4.1.22420.2.5.1.1.37
Indicates the current Two-way delay variation average value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultTwoWayDvCurrThreshEx 1.3.6.1.4.1.22420.2.5.1.1.38
Indicates the current number of samples exceeding the limit.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaResultTwoWayDvPrevValid 1.3.6.1.4.1.22420.2.5.1.1.39
Indicates the validity of the previous Two-way delay variation results.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdPaaResultTwoWayDvPrevMinValue 1.3.6.1.4.1.22420.2.5.1.1.40
Indicates the previous Two-way delay variation minimum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultTwoWayDvPrevMaxValue 1.3.6.1.4.1.22420.2.5.1.1.41
Indicates the previous Two-way delay variation maximum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultTwoWayDvPrevAvgValue 1.3.6.1.4.1.22420.2.5.1.1.42
Indicates the previous Two-way delay variation average value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultTwoWayDvPrevThreshEx 1.3.6.1.4.1.22420.2.5.1.1.43
Indicates the previous number of samples exceeding the limit.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaResultOneWayDelayInstValue 1.3.6.1.4.1.22420.2.5.1.1.44
Indicate the One-way delay instantaneous value. The value is express in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultOneWayDelayCurrValid 1.3.6.1.4.1.22420.2.5.1.1.45
Indicate the validity of the current One-way delay results.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdPaaResultOneWayDelayCurrMinValue 1.3.6.1.4.1.22420.2.5.1.1.46
Indicate the current One-way delay minimum value. The value is express in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultOneWayDelayCurrMaxValue 1.3.6.1.4.1.22420.2.5.1.1.47
Indicate the current One-way delay maximum value. The value is express in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultOneWayDelayCurrAvgValue 1.3.6.1.4.1.22420.2.5.1.1.48
Indicate the current One-way delay average value. The value is express in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultOneWayDelayCurrThreshEx 1.3.6.1.4.1.22420.2.5.1.1.49
Indicate the current number of sample exceeding the limit.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaResultOneWayDelayPrevValid 1.3.6.1.4.1.22420.2.5.1.1.50
Indicate the validity of the previous One-way delay results.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdPaaResultOneWayDelayPrevMinValue 1.3.6.1.4.1.22420.2.5.1.1.51
Indicate the previous One-way delay minimum value. The value is express in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultOneWayDelayPrevMaxValue 1.3.6.1.4.1.22420.2.5.1.1.52
Indicate the previous One-way delay maximum value. The value is express in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultOneWayDelayPrevAvgValue 1.3.6.1.4.1.22420.2.5.1.1.53
Indicate the previous One-way delay average value. The value is express in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultOneWayDelayPrevThreshEx 1.3.6.1.4.1.22420.2.5.1.1.54
Indicate the previous number of sample exceeding the limit.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaResultPktLossTime 1.3.6.1.4.1.22420.2.5.1.1.55
Indicates the time when the current packet loss results were moved to the previous packet loss results.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

acdPaaResultOneWayTime 1.3.6.1.4.1.22420.2.5.1.1.56
Indicates the time when the current one-way results were moved to the previous one-way results.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

acdPaaResultTwoWayTime 1.3.6.1.4.1.22420.2.5.1.1.57
Indicates the time when the current two-way results were moved to the previous two-way results.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

acdPaaResultPktLossNeCurrSamples 1.3.6.1.4.1.22420.2.5.1.1.58
Indicates the number of samples gathered to calculate the current period near-end packet loss results.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaResultPktLossNePrevSamples 1.3.6.1.4.1.22420.2.5.1.1.59
Indicates the number of samples gathered to calculate the previous period near-end packet loss results.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaResultPktLossFeCurrSamples 1.3.6.1.4.1.22420.2.5.1.1.60
Indicates the number of samples gathered to calculate the current period far-end packet loss results.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaResultPktLossFePrevSamples 1.3.6.1.4.1.22420.2.5.1.1.61
Indicates the number of samples gathered to calculate the previous period far-end packet loss results.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaResultOneWayDelayCurrSamples 1.3.6.1.4.1.22420.2.5.1.1.62
Indicates the number of samples gathered to calculate the current period one-way delay results.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaResultOneWayDelayPrevSamples 1.3.6.1.4.1.22420.2.5.1.1.63
Indicates the number of samples gathered to calculate the previous period one-way delay results.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaResultOneWayDvCurrSamples 1.3.6.1.4.1.22420.2.5.1.1.64
Indicates the number of samples gathered to calculate the current period one-way delay variation results.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaResultOneWayDvPrevSamples 1.3.6.1.4.1.22420.2.5.1.1.65
Indicates the number of samples gathered to calculate the previous period one-way delay variation results.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaResultTwoWayDelayCurrSamples 1.3.6.1.4.1.22420.2.5.1.1.66
Indicates the number of samples gathered to calculate the current period two-way delay results.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaResultTwoWayDelayPrevSamples 1.3.6.1.4.1.22420.2.5.1.1.67
Indicates the number of samples gathered to calculate the previous period two-way delay results.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaResultTwoWayDvCurrSamples 1.3.6.1.4.1.22420.2.5.1.1.68
Indicates the number of samples gathered to calculate the current period two-way delay variation results.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaResultTwoWayDvPrevSamples 1.3.6.1.4.1.22420.2.5.1.1.69
Indicates the number of samples gathered to calculate the previous period two-way delay variation results.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaResultIgmpJoinDelayInstValue 1.3.6.1.4.1.22420.2.5.1.1.70
Indicates the IGMP Join delay instantaneous value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultIgmpJoinDelayCurrValid 1.3.6.1.4.1.22420.2.5.1.1.71
Indicates the validity of the current IGMP Join delay results.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdPaaResultIgmpJoinDelayCurrMinValue 1.3.6.1.4.1.22420.2.5.1.1.72
Indicates the current IGMP Join delay minimum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultIgmpJoinDelayCurrMaxValue 1.3.6.1.4.1.22420.2.5.1.1.73
Indicates the current IGMP Join delay maximum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultIgmpJoinDelayCurrAvgValue 1.3.6.1.4.1.22420.2.5.1.1.74
Indicates the current IGMP Join delay average value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultIgmpJoinDelayCurrThreshEx 1.3.6.1.4.1.22420.2.5.1.1.75
Indicates the current number of IGMP Join samples exceeding the limit.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaResultIgmpJoinDelayPrevValid 1.3.6.1.4.1.22420.2.5.1.1.76
Indicates the validity of the previous IGMP Join delay results.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdPaaResultIgmpJoinDelayPrevMinValue 1.3.6.1.4.1.22420.2.5.1.1.77
Indicates the previous IGMP Join delay minimum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultIgmpJoinDelayPrevMaxValue 1.3.6.1.4.1.22420.2.5.1.1.78
Indicates the previous IGMP Join delay maximum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultIgmpJoinDelayPrevAvgValue 1.3.6.1.4.1.22420.2.5.1.1.79
Indicates the previous IGMP Join delay average value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultIgmpJoinDelayPrevThreshEx 1.3.6.1.4.1.22420.2.5.1.1.80
Indicates the previous number of IGMP Join samples exceeding the limit.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaResultIgmpLeaveDelayInstValue 1.3.6.1.4.1.22420.2.5.1.1.81
Indicates the IGMP Leave delay instantaneous value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultIgmpLeaveDelayCurrValid 1.3.6.1.4.1.22420.2.5.1.1.82
Indicates the validity of the current IGMP Leave delay results.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdPaaResultIgmpLeaveDelayCurrMinValue 1.3.6.1.4.1.22420.2.5.1.1.83
Indicates the current IGMP Leave delay minimum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultIgmpLeaveDelayCurrMaxValue 1.3.6.1.4.1.22420.2.5.1.1.84
Indicates the current IGMP Leave delay maximum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultIgmpLeaveDelayCurrAvgValue 1.3.6.1.4.1.22420.2.5.1.1.85
Indicates the current IGMP Leave delay average value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultIgmpLeaveDelayCurrThreshEx 1.3.6.1.4.1.22420.2.5.1.1.86
Indicates the current number of IGMP Leave samples exceeding the limit.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaResultIgmpLeaveDelayPrevValid 1.3.6.1.4.1.22420.2.5.1.1.87
Indicates the validity of the previous IGMP Leave delay results.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdPaaResultIgmpLeaveDelayPrevMinValue 1.3.6.1.4.1.22420.2.5.1.1.88
Indicates the previous IGMP Leave delay minimum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultIgmpLeaveDelayPrevMaxValue 1.3.6.1.4.1.22420.2.5.1.1.89
Indicates the previous IGMP Leave delay maximum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultIgmpLeaveDelayPrevAvgValue 1.3.6.1.4.1.22420.2.5.1.1.90
Indicates the previous IGMP Leave delay average value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaResultIgmpLeaveDelayPrevThreshEx 1.3.6.1.4.1.22420.2.5.1.1.91
Indicates the previous number of IGMP Leave samples exceeding the limit.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaResultIgmpJoinDelayTime 1.3.6.1.4.1.22420.2.5.1.1.92
Indicates the time when the current IGMP Join delay results were moved to the previous IGMP join delay results.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

acdPaaResultIgmpLeaveDelayTime 1.3.6.1.4.1.22420.2.5.1.1.93
Indicates the time when the current IGMP Leave results were moved to the previous IGMP Leave results.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

acdPaaResultIgmpJoinDelayCurrSamples 1.3.6.1.4.1.22420.2.5.1.1.94
Indicates the number of IGMP Join samples gathered to calculate the current period IGMP Join delay results.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaResultIgmpJoinDelayPrevSamples 1.3.6.1.4.1.22420.2.5.1.1.95
Indicates the number of IGMP Join samples gathered to calculate the previous period IGMP Join delay results.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaResultIgmpLeaveDelayCurrSamples 1.3.6.1.4.1.22420.2.5.1.1.96
Indicates the number of IGMP Leave samples gathered to calculate the current period IGMP Leave delay results.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaResultIgmpLeaveDelayPrevSamples 1.3.6.1.4.1.22420.2.5.1.1.97
Indicates the number of IGMP Leave samples gathered to calculate the previous period IGMP Leave delay results.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaResultPktLossCurrGaps 1.3.6.1.4.1.22420.2.5.1.1.98
Indicates the number of gaps that occured in the current period.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaResultPktLossPrevGaps 1.3.6.1.4.1.22420.2.5.1.1.99
Indicates the number of gaps that occured in the previous period.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaResultPktLossCurrLargestGap 1.3.6.1.4.1.22420.2.5.1.1.100
Indicates the size of the largest gap that occured in the current period.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaResultPktLossPrevLargestGap 1.3.6.1.4.1.22420.2.5.1.1.101
Indicates the size of the largest gap that occured in the previous period.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaResultPktLossNeCurrValueExt 1.3.6.1.4.1.22420.2.5.1.1.102
Extended near-end current packet loss. The packet loss is the percent of packets transmitted but not received in millionth of a percent (1,000,000 is 1%).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100000000  

acdPaaResultPktLossNePrevValueExt 1.3.6.1.4.1.22420.2.5.1.1.103
Extended near-end previous packet loss. The packet loss is the percent of packets transmitted but not received in millionth of a percent (1,000,000 is 1%).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100000000  

acdPaaResultPktLossFeCurrValueExt 1.3.6.1.4.1.22420.2.5.1.1.104
Extended far-end current packet loss. The packet loss is the percent of packets transmitted but not received in millionth of a percent (1,000,000 is 1%).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100000000  

acdPaaResultPktLossFePrevValueExt 1.3.6.1.4.1.22420.2.5.1.1.105
Extended far-end previous packet loss. The packet loss is the percent of packets transmitted but not received in millionth of a percent (1,000,000 is 1%).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100000000  

acdPaaResultPktLossNeCurrNbrLoss 1.3.6.1.4.1.22420.2.5.1.1.106
Indicates the current period number of near-end packet lost. This should be less or equal to acdPaaResultPktLossNeCurrSamples.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaResultPktLossNePrevNbrLoss 1.3.6.1.4.1.22420.2.5.1.1.107
Indicates the previous period number of near-end packet lost. This should be less or equal to acdPaaResultPktLossNePrevSamples.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaResultPktLossFeCurrNbrLoss 1.3.6.1.4.1.22420.2.5.1.1.108
Indicates the current period number of far-end packet lost. This should be less or equal to acdPaaResultPktLossFeCurrSamples.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaResultPktLossFePrevNbrLoss 1.3.6.1.4.1.22420.2.5.1.1.109
Indicates the previous period number of far-end packet lost. This should be less or equal to acdPaaResultPktLossFePrevSamples.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaStatusTable 1.3.6.1.4.1.22420.2.5.2
Status table of all Paa entries
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcdPaaStatusEntry

acdPaaStatusEntry 1.3.6.1.4.1.22420.2.5.2.1
An entry consisting of the status for a PAA instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcdPaaStatusEntry  

acdPaaStatusID 1.3.6.1.4.1.22420.2.5.2.1.1
Unique value for each PAA instance. Its value ranges from 1 to MAXINT (4 bytes).
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

acdPaaStatusCcAlert 1.3.6.1.4.1.22420.2.5.2.1.2
Indicates the presence of the Connectivity Check alert.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdPaaStatusPktLossAlert 1.3.6.1.4.1.22420.2.5.2.1.3
Indicates the presence of the Packet Loss alert.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdPaaStatusOneWayDvAlert 1.3.6.1.4.1.22420.2.5.2.1.4
Indicates the presence of the One-way Delay Variation alert.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdPaaStatusOneWayAvgDvAlert 1.3.6.1.4.1.22420.2.5.2.1.5
Indicates the presence of the One-way Average Delay Variation alert.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdPaaStatusTwoWayDelayAlert 1.3.6.1.4.1.22420.2.5.2.1.6
Indicates the presence of the Two-way Delay alert.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdPaaStatusTwoWayAvgDelayAlert 1.3.6.1.4.1.22420.2.5.2.1.7
Indicates the presence of the Two-way Average Delay alert.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdPaaStatusTwoWayDvAlert 1.3.6.1.4.1.22420.2.5.2.1.8
Indicates the presence of the Two-way Delay Variation alert.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdPaaStatusTwoWayAvgDvAlert 1.3.6.1.4.1.22420.2.5.2.1.9
Indicates the presence of the Two-way Average Delay Variation alert.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdPaaStatusOneWayDelayAlert 1.3.6.1.4.1.22420.2.5.2.1.10
Indicate the presence of the One Way Delay alert.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdPaaStatusOneWayAvgDelayAlert 1.3.6.1.4.1.22420.2.5.2.1.11
Indicate the presence of the One Way Average Delay alert.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdPaaStatusState 1.3.6.1.4.1.22420.2.5.2.1.12
Paa instance state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), associating(1), associated(2), running(3), idle(4), lockedIS(5), lockedOOS(6)  

acdPaaStatusPeerAddress 1.3.6.1.4.1.22420.2.5.2.1.13
The peer address. Dynamically resolved or statically configured.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

acdPaaUdpCfgTable 1.3.6.1.4.1.22420.2.5.3
Configuration table of all UDP PAA entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcdPaaUdpCfgEntry

acdPaaUdpCfgEntry 1.3.6.1.4.1.22420.2.5.3.1
An entry consisting of all settings to manage a PAA instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcdPaaUdpCfgEntry  

acdPaaUdpCfgID 1.3.6.1.4.1.22420.2.5.3.1.1
Unique value for each PAA instance. This value follows the ordering of the status and the results table. Its value ranges from 1 to MAXINT (4 bytes).
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

acdPaaUdpCfgName 1.3.6.1.4.1.22420.2.5.3.1.2
This is a string to identify this PAA instance.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

acdPaaUdpCfgState 1.3.6.1.4.1.22420.2.5.3.1.3
Configuration state of this PAA entry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(0), disable(1)  

acdPaaUdpCfgPktSize 1.3.6.1.4.1.22420.2.5.3.1.4
Transmit packet size.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaUdpCfgSamplingPeriod 1.3.6.1.4.1.22420.2.5.3.1.5
Interval in milliseconds at which PAA issues PAA measurement packets.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaUdpCfgCcLossThresh 1.3.6.1.4.1.22420.2.5.3.1.6
Maximum number of lost CCM (Connectivity Check Messages) for declaring a connectvity loss.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaUdpCfgPktLossRefPeriod 1.3.6.1.4.1.22420.2.5.3.1.7
Reference period in milliseconds for packet loss measurement.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaUdpCfgPktLossThresh 1.3.6.1.4.1.22420.2.5.3.1.8
Allowed packet loss, in pecentage (%).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaUdpCfgOneWayRefPeriod 1.3.6.1.4.1.22420.2.5.3.1.9
Reference period in milliseconds for one-way measurement.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaUdpCfgOneWayDvMax 1.3.6.1.4.1.22420.2.5.3.1.10
Maximum allowed instantaneous delay variation.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaUdpCfgOneWayDvThresh 1.3.6.1.4.1.22420.2.5.3.1.11
Number of consecutive delay variations greater than the threshold.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaUdpCfgOneWayAvgDvThresh 1.3.6.1.4.1.22420.2.5.3.1.12
One-way average delay variation threshold.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaUdpCfgTwoWayRefPeriod 1.3.6.1.4.1.22420.2.5.3.1.13
Reference period in milliseconds for two-way measurement.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaUdpCfgTwoWayDelayMax 1.3.6.1.4.1.22420.2.5.3.1.14
Maximum allowed instantaneous delay.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaUdpCfgTwoWayDelayThresh 1.3.6.1.4.1.22420.2.5.3.1.15
Number of consecutive delays greater than the threshold.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaUdpCfgTwoWayAvgDelayThresh 1.3.6.1.4.1.22420.2.5.3.1.16
Two-way average delay threshold.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaUdpCfgTwoWayDvMax 1.3.6.1.4.1.22420.2.5.3.1.17
Maximum allowed instantaneous delay variation.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaUdpCfgTwoWayDvThresh 1.3.6.1.4.1.22420.2.5.3.1.18
Number of consecutive delay variations greater than the threshold.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaUdpCfgTwoWayAvgDvThresh 1.3.6.1.4.1.22420.2.5.3.1.19
Two-way average delay variation threshold.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaUdpCfgIPv4DstAddr 1.3.6.1.4.1.22420.2.5.3.1.20
The destination IP address used to reach the peer PAA instance.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

acdPaaUdpCfgPortNumber 1.3.6.1.4.1.22420.2.5.3.1.21
The source UDP port number on which to listen for peer PAA samples.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaUdpCfgDscpValue 1.3.6.1.4.1.22420.2.5.3.1.22
The DSCP value used to reach the peer PAA instance. Its value ranges from 0 to 64.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaUdpCfgVlan1PbitsValue 1.3.6.1.4.1.22420.2.5.3.1.23
The first VLAN priority used to tag the outgoing traffic. Its value ranges from 0 to 7.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaUdpCfgVlan2PbitsValue 1.3.6.1.4.1.22420.2.5.3.1.24
The second VLAN priority used to tag the outgoing traffic. Its value ranges from 0 to 7.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaUdpCfgOneWayDelayMax 1.3.6.1.4.1.22420.2.5.3.1.25
Maximum allowed instantaneous delay.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaUdpCfgOneWayDelayThresh 1.3.6.1.4.1.22420.2.5.3.1.26
Nbr consecutive delay > max before alert.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaUdpCfgOneWayAvgDelayThresh 1.3.6.1.4.1.22420.2.5.3.1.27
Two-way average delay threshold.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaUdpCfgDestinationPortNumber 1.3.6.1.4.1.22420.2.5.3.1.28
The destination UDP port number used to reach the peer PAA instance.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaUdpCfgPeerID 1.3.6.1.4.1.22420.2.5.3.1.29
Unique value for the peer PAA instance. This value follows the ordering of the status and the results table. Its value ranges from 1 to MAXINT (4 bytes).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaUdpCfgOperationMode 1.3.6.1.4.1.22420.2.5.3.1.30
PAA Operation Mode. Its values are: 1 = Bi-Dir, 2 = Source, 3 = Sink
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaUdpCfgIgmpOneWayJoinPeriod 1.3.6.1.4.1.22420.2.5.3.1.31
The IGMP One-way join period is the amount of time to wait from the beginning of the period before an IGMP join request is sent out.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaUdpCfgIgmpRefPeriod 1.3.6.1.4.1.22420.2.5.3.1.32
The IGMP reference period is the total amount of time in which we sample IGMP join and leave requests. It must be a minimum of (10 * One-way ref. period).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaUdpCfgIgmpMaxJoinDly 1.3.6.1.4.1.22420.2.5.3.1.33
The maximum join delay objective.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaUdpCfgIgmpJoinDlyThres 1.3.6.1.4.1.22420.2.5.3.1.34
The maximum consecutive join delay samples allowed greater than the maximum join delay.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaUdpCfgIgmpJoinAvgDlyThres 1.3.6.1.4.1.22420.2.5.3.1.35
The maximum join average delay.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaUdpCfgIgmpMaxLvDly 1.3.6.1.4.1.22420.2.5.3.1.36
The maximum join delay objective.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaUdpCfgIgmpLvDlyThresh 1.3.6.1.4.1.22420.2.5.3.1.37
The maximum consecutive leave delay samples allowed greater than the maximum leave delay.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaUdpCfgIgmpLvAvgDlyThresh 1.3.6.1.4.1.22420.2.5.3.1.38
The maximum leave delay average.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaUdpCfgPktLossThreshExt 1.3.6.1.4.1.22420.2.5.3.1.39
Extended packet loss ratio threshold allowed without issuing an alarm expressed in millionth of percent (1,000,000 is 1%).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..100000000  

acdPaaL2CfgTable 1.3.6.1.4.1.22420.2.5.4
Configuration table of all L2 PAA entries
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcdPaaL2CfgEntry

acdPaaL2CfgEntry 1.3.6.1.4.1.22420.2.5.4.1
An entry consisting of all settings to manage a PAA instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcdPaaL2CfgEntry  

acdPaaL2CfgID 1.3.6.1.4.1.22420.2.5.4.1.1
Unique value for each PAA instance. This value follows the ordering of the status and the results table. Its value ranges from 1 to MAXINT (4 bytes).
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

acdPaaL2CfgName 1.3.6.1.4.1.22420.2.5.4.1.2
This is a string to identify this PAA instance.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

acdPaaL2CfgState 1.3.6.1.4.1.22420.2.5.4.1.3
Configuration state of this PAA entry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(0), disable(1)  

acdPaaL2CfgPktSize 1.3.6.1.4.1.22420.2.5.4.1.4
Transmit packet size.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaL2CfgSamplingPeriod 1.3.6.1.4.1.22420.2.5.4.1.5
Interval in milliseconds at which PAA issues PAA measurement packets.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaL2CfgCcLossThresh 1.3.6.1.4.1.22420.2.5.4.1.6
Maximum number of lost CCM (Connectivity Check Messages) for declaring a connectvity loss.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaL2CfgPktLossRefPeriod 1.3.6.1.4.1.22420.2.5.4.1.7
Reference period in milliseconds for packet loss measurement.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaL2CfgPktLossThresh 1.3.6.1.4.1.22420.2.5.4.1.8
Allowed packet loss, in percentage (%).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaL2CfgOneWayRefPeriod 1.3.6.1.4.1.22420.2.5.4.1.9
Reference period in milliseconds for one-way measurement.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaL2CfgOneWayDvMax 1.3.6.1.4.1.22420.2.5.4.1.10
Maximum allowed instantaneous delay variation.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaL2CfgOneWayDvThresh 1.3.6.1.4.1.22420.2.5.4.1.11
Number of consecutive delay variations greater than the threshold.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaL2CfgOneWayAvgDvThresh 1.3.6.1.4.1.22420.2.5.4.1.12
One-way average delay variation threshold.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaL2CfgTwoWayRefPeriod 1.3.6.1.4.1.22420.2.5.4.1.13
Reference period in milliseconds for two-way measurement.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaL2CfgTwoWayDelayMax 1.3.6.1.4.1.22420.2.5.4.1.14
Maximum allowed instantaneous delay.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaL2CfgTwoWayDelayThresh 1.3.6.1.4.1.22420.2.5.4.1.15
Number of consecutive delays greater than the threshold.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaL2CfgTwoWayAvgDelayThresh 1.3.6.1.4.1.22420.2.5.4.1.16
Two-way average delay threshold.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaL2CfgTwoWayDvMax 1.3.6.1.4.1.22420.2.5.4.1.17
Maximum allowed instantaneous delay variation.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaL2CfgTwoWayDvThresh 1.3.6.1.4.1.22420.2.5.4.1.18
Number of consecutive delay variations greater than the threshold.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaL2CfgTwoWayAvgDvThresh 1.3.6.1.4.1.22420.2.5.4.1.19
Two-way average delay variation threshold.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaL2CfgPortName 1.3.6.1.4.1.22420.2.5.4.1.20
The Port Name used to reach the peer PAA instance.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

acdPaaL2CfgMacDst 1.3.6.1.4.1.22420.2.5.4.1.21
The MAC address used to reach the peer PAA instance.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

acdPaaL2CfgEtype 1.3.6.1.4.1.22420.2.5.4.1.22
The Ethernet type used for this PAA instance.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaL2CfgVlan1IdEn 1.3.6.1.4.1.22420.2.5.4.1.23
Enable or disable the first VLAN ID check
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

acdPaaL2CfgVlan1Id 1.3.6.1.4.1.22420.2.5.4.1.24
The first VLAN ID used to compare the incoming PAA traffic. Its value ranges from 0 to 4095.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaL2CfgVlan2IdEn 1.3.6.1.4.1.22420.2.5.4.1.25
Enable or disable the second VLAN ID check
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

acdPaaL2CfgVlan2Id 1.3.6.1.4.1.22420.2.5.4.1.26
The second VLAN ID used to compare the incoming PAA traffic. Its value ranges from 0 to 4095.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaL2CfgVlan1PbitsValue 1.3.6.1.4.1.22420.2.5.4.1.27
The first VLAN priority used to tag the outgoing traffic. Its value ranges from 0 to 7.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaL2CfgVlan2PbitsValue 1.3.6.1.4.1.22420.2.5.4.1.28
The second VLAN priority used to tag the outgoing traffic. Its value ranges from 0 to 7.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaL2CfgOneWayDelayMax 1.3.6.1.4.1.22420.2.5.4.1.29
Maximum allowed instantaneous delay.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaL2CfgOneWayDelayThresh 1.3.6.1.4.1.22420.2.5.4.1.30
Nbr consecutive delay > max before alert.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaL2CfgOneWayAvgDelayThresh 1.3.6.1.4.1.22420.2.5.4.1.31
One-way average delay threshold.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaL2CfgPeerID 1.3.6.1.4.1.22420.2.5.4.1.32
Unique value for the peer PAA instance. This value follows the ordering of the status and the results table. Its value ranges from 1 to MAXINT (4 bytes).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaL2CfgOperationMode 1.3.6.1.4.1.22420.2.5.4.1.33
PAA Operation Mode. Its values are: 1 = Bi-Dir, 2 = Source, 3 = Sink
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdPaaL2CfgPktLossThreshExt 1.3.6.1.4.1.22420.2.5.4.1.34
Extended packet loss ratio threshold allowed without issuing an alarm expressed in millionth of percent (1,000,000 is 1%).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..100000000  

acdPaaHistResultTable 1.3.6.1.4.1.22420.2.5.5
Result table of all Paa entries
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcdPaaHistResultEntry

acdPaaHistResultEntry 1.3.6.1.4.1.22420.2.5.5.1
An entry consisting of results for a PAA instance for a specific periodin time.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcdPaaHistResultEntry  

acdPaaHistResultID 1.3.6.1.4.1.22420.2.5.5.1.1
Unique value for each PAA instance. Its value ranges from 1 to MAXINT (4 bytes).
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

acdPaaHistResultSampleIndex 1.3.6.1.4.1.22420.2.5.5.1.2
An index that uniquely identifies the particular sample this entry represents among all samples associated with the same PAA instance. This index starts at 1 and increases by one as each new sample.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

acdPaaHistResultStatus 1.3.6.1.4.1.22420.2.5.5.1.3
The status of this acdPaaHistResult entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

acdPaaHistResultDuration 1.3.6.1.4.1.22420.2.5.5.1.4
The interval in seconds over which the data is sampled for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaHistResultIntervalEnd 1.3.6.1.4.1.22420.2.5.5.1.5
This is the time of the end of this entry.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

acdPaaHistResultPktLossNeValid 1.3.6.1.4.1.22420.2.5.5.1.6
Indicates the validity of the Near-end packet loss results during this sampling interval.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdPaaHistResultPktLossNeSamples 1.3.6.1.4.1.22420.2.5.5.1.7
Indicates the number of samples gathered during the sampling interval to calculate the Near-end packet loss.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaHistResultPktLossNeValue 1.3.6.1.4.1.22420.2.5.5.1.8
Indicates the Near-end packet loss during this sampling interval. The packet loss is the percent of packets transmitted but not received of the Ethernet segment in hundredths of a percent.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..10000  

acdPaaHistResultPktLossFeValid 1.3.6.1.4.1.22420.2.5.5.1.9
Indicates the validity of the Far-end packet loss results during this sampling interval.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdPaaHistResultPktLossFeSamples 1.3.6.1.4.1.22420.2.5.5.1.10
Indicates the number of samples gathered during the sampling interval to calculate the Far-end packet loss.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaHistResultPktLossFeValue 1.3.6.1.4.1.22420.2.5.5.1.11
Indicates the Far-end packet loss during this sampling interval. The packet loss is the percent of packets transmitted but not received of the Ethernet segment in hundredths of a percent.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..10000  

acdPaaHistResultOneWayDelayValid 1.3.6.1.4.1.22420.2.5.5.1.12
Indicate the validity of the One-way delay results during this sampling interval.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdPaaHistResultOneWayDelaySamples 1.3.6.1.4.1.22420.2.5.5.1.13
Indicates the number of samples gathered during the sampling interval to calculate One-way delay results.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaHistResultOneWayDelayMinValue 1.3.6.1.4.1.22420.2.5.5.1.14
Indicate the One-way delay minimum value during this sampling interval. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaHistResultOneWayDelayMaxValue 1.3.6.1.4.1.22420.2.5.5.1.15
Indicate the One-way delay maximum value during this sampling interval. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaHistResultOneWayDelayAvgValue 1.3.6.1.4.1.22420.2.5.5.1.16
Indicate the One-way delay average value during this sampling interval. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaHistResultOneWayDelayThreshEx 1.3.6.1.4.1.22420.2.5.5.1.17
Indicate the number of sample exceeding the limit during this sampling interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaHistResultOneWayDvValid 1.3.6.1.4.1.22420.2.5.5.1.18
Indicates the validity of the One-way delay variation results during this sampling interval.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdPaaHistResultOneWayDvSamples 1.3.6.1.4.1.22420.2.5.5.1.19
Indicates the number of samples gathered during the sampling interval to calculate One-way delay variation results.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaHistResultOneWayDvMinValue 1.3.6.1.4.1.22420.2.5.5.1.20
Indicates the One-way delay variation minimum value during this sampling interval. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaHistResultOneWayDvMaxValue 1.3.6.1.4.1.22420.2.5.5.1.21
Indicates the One-way delay variation maximum value during this sampling interval. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaHistResultOneWayDvAvgValue 1.3.6.1.4.1.22420.2.5.5.1.22
Indicates the One-way delay variation average value during this sampling interval. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaHistResultOneWayDvThreshEx 1.3.6.1.4.1.22420.2.5.5.1.23
Indicates the number of samples exceeding the limit during this sampling interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaHistResultTwoWayDelayValid 1.3.6.1.4.1.22420.2.5.5.1.24
Indicates the validity of the Two-way delay results during this sampling interval.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdPaaHistResultTwoWayDelaySamples 1.3.6.1.4.1.22420.2.5.5.1.25
Indicates the number of samples gathered during the sampling interval to calculate Two-way delay results.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaHistResultTwoWayDelayMinValue 1.3.6.1.4.1.22420.2.5.5.1.26
Indicates the Two-way delay minimum value during this sampling interval. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaHistResultTwoWayDelayMaxValue 1.3.6.1.4.1.22420.2.5.5.1.27
Indicates the Two-way delay maximum value during this sampling interval. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaHistResultTwoWayDelayAvgValue 1.3.6.1.4.1.22420.2.5.5.1.28
Indicates the Two-way delay average value during this sampling interval. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaHistResultTwoWayDelayThreshEx 1.3.6.1.4.1.22420.2.5.5.1.29
Indicates the number of samples exceeding the limit during this sampling interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaHistResultTwoWayDvValid 1.3.6.1.4.1.22420.2.5.5.1.30
Indicates the validity of the Two-way delay variation results during this sampling interval.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdPaaHistResultTwoWayDvSamples 1.3.6.1.4.1.22420.2.5.5.1.31
Indicates the number of samples gathered during the sampling interval to calculate Two-way delay variation results.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaHistResultTwoWayDvMinValue 1.3.6.1.4.1.22420.2.5.5.1.32
Indicates the Two-way delay variation minimum value during this sampling interval. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaHistResultTwoWayDvMaxValue 1.3.6.1.4.1.22420.2.5.5.1.33
Indicates the Two-way delay variation maximum value during this sampling interval. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaHistResultTwoWayDvAvgValue 1.3.6.1.4.1.22420.2.5.5.1.34
Indicates the Two-way delay variation average value during this sampling interval. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaHistResultTwoWayDvThreshEx 1.3.6.1.4.1.22420.2.5.5.1.35
Indicates the number of samples exceeding the limit during this sampling interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaHistResultIgmpJoinDelayValid 1.3.6.1.4.1.22420.2.5.5.1.36
Indicates the validity of the IGMP Join delay results during this sampling interval.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdPaaHistResultIgmpJoinDelaySamples 1.3.6.1.4.1.22420.2.5.5.1.37
Indicates the number of samples gathered during the sampling interval to calculate IGMP Join delay results.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaHistResultIgmpJoinDelayMinValue 1.3.6.1.4.1.22420.2.5.5.1.38
Indicates the IGMP Join delay minimum value during this sampling interval. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaHistResultIgmpJoinDelayMaxValue 1.3.6.1.4.1.22420.2.5.5.1.39
Indicates the IGMP Join delay maximum value during this sampling interval. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaHistResultIgmpJoinDelayAvgValue 1.3.6.1.4.1.22420.2.5.5.1.40
Indicates the IGMP Join delay average value during this sampling interval. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaHistResultIgmpJoinDelayThreshEx 1.3.6.1.4.1.22420.2.5.5.1.41
Indicates the number of IGMP Join samples exceeding the limit during this sampling interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaHistResultIgmpLeaveDelayValid 1.3.6.1.4.1.22420.2.5.5.1.42
Indicates the validity of the IGMP Leave delay results during this sampling interval.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdPaaHistResultIgmpLeaveDelaySamples 1.3.6.1.4.1.22420.2.5.5.1.43
Indicates the number of samples gathered during the sampling interval to calculate IGMP Leave delay results.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaHistResultIgmpLeaveDelayMinValue 1.3.6.1.4.1.22420.2.5.5.1.44
Indicates the IGMP Leave delay minimum value during this sampling interval. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaHistResultIgmpLeaveDelayMaxValue 1.3.6.1.4.1.22420.2.5.5.1.45
Indicates the IGMP Leave delay maximum value during this sampling interval. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaHistResultIgmpLeaveDelayAvgValue 1.3.6.1.4.1.22420.2.5.5.1.46
Indicates the IGMP Leave delay average value during this sampling interval. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdPaaHistResultIgmpLeaveDelayThreshEx 1.3.6.1.4.1.22420.2.5.5.1.47
Indicates the number of IGMP Leave samples exceeding the limit during this sampling interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaHistResultPktLossNeValueExt 1.3.6.1.4.1.22420.2.5.5.1.48
Extended near-end packet loss ratio. The packet loss is the percent of packets transmitted but not received in millionth of a percent (1,000,000 is 1%).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100000000  

acdPaaHistResultPktLossFeValueExt 1.3.6.1.4.1.22420.2.5.5.1.49
Extended far-end packet loss ratio. The packet loss is the percent of packets transmitted but not received in millionth of a percent (1,000,000 is 1%).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100000000  

acdPaaHistResultPktLossNeNbrLoss 1.3.6.1.4.1.22420.2.5.5.1.50
Indicates the number of near-end packet lost for the period. This should be less or equal to acdPaaHistResultPktLossNeSamples.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaHistResultPktLossFeNbrLoss 1.3.6.1.4.1.22420.2.5.5.1.51
Indicates the number of far-end packet lost for the period. This should be less or equal to acdPaaHistResultPktLossNeSamples.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdPaaCompliances 1.3.6.1.4.1.22420.2.5.9.1
OBJECT IDENTIFIER    

acdPaaGroups 1.3.6.1.4.1.22420.2.5.9.2
OBJECT IDENTIFIER    

acdPaaResultGroup 1.3.6.1.4.1.22420.2.5.9.2.1
Objects for the PAA result Group.
Status: current Access: read-only
OBJECT-GROUP    

acdPaaStatusGroup 1.3.6.1.4.1.22420.2.5.9.2.2
Objects for the PAA status Group.
Status: current Access: read-only
OBJECT-GROUP    

acdPaaUdpCfgGroup 1.3.6.1.4.1.22420.2.5.9.2.3
Objects for the PAA UDP configuration Group.
Status: current Access: read-only
OBJECT-GROUP    

acdPaaL2CfgGroup 1.3.6.1.4.1.22420.2.5.9.2.4
Objects for the PAA L2 configuration Group.
Status: current Access: read-only
OBJECT-GROUP    

acdPaaHistResultGroup 1.3.6.1.4.1.22420.2.5.9.2.5
Objects for the PAA history result Group.
Status: current Access: read-only
OBJECT-GROUP    

acdPaaCompliance 1.3.6.1.4.1.22420.2.5.9.1.1
The compliance statement for support of the ACD-PAA-MIB module.
Status: current Access: read-only
MODULE-COMPLIANCE