ACC-X25

File: ACC-X25.mib (57412 bytes)

Imported modules

RFC1155-SMI RFC-1215 ACC-SYSTEM
ACC-MIB

Imported symbols

NetworkAddress OBJECT-TYPE IpAddress
TimeTicks Gauge Counter
TRAP-TYPE accTrapLogSeqNum accBRG
DisplayString RowStatus IfIndex
SmdsAddress

Defined Types

AccX25AtEntry  
SEQUENCE    
  accX25AtIfIndex INTEGER
  accX25AtIpAddress NetworkAddress
  accX25AtNetInOutAddr DisplayString
  accX25AtNetInAddr DisplayString
  accX25AtNetFacIndex INTEGER

AccX25SubnetParmEntry  
SEQUENCE    
  accX25SubnetAddr IpAddress
  accX25Facility INTEGER
  accX25PktNegot INTEGER
  accX25WindowNegot INTEGER

AccX25PortParmEntry  
SEQUENCE    
  accX25PortParmIndex INTEGER
  accX25AddrMode INTEGER
  accX25PktSize INTEGER
  accX25PktWind INTEGER
  accX25SvcNumber INTEGER
  accX25SvcBase INTEGER
  accX25ExtendClr INTEGER
  accX25ExtendSeq INTEGER
  accX25IdleMin TimeTicks
  accX25IdleMax TimeTicks
  accX25IdleScale TimeTicks
  accX25SvcMax INTEGER
  accX25SvcLimit INTEGER
  accX25OpenThresh INTEGER
  accX25SvcMin INTEGER
  accX25SvcDelay INTEGER
  accX25InitBackoff INTEGER
  accX25MaxBackoff INTEGER
  accX25OurAddress DisplayString
  accX25PvcBase INTEGER
  accX25PvcNumber INTEGER
  accX25Tx0Timer TimeTicks
  accX25Tx1Timer TimeTicks
  accX25Tx2Timer TimeTicks
  accX25Tx3Timer TimeTicks
  accX25PortEventSeverityLevel INTEGER

AccX25PktStatEntry  
SEQUENCE    
  accX25PktIndex INTEGER
  accX25RcvDiags Counter
  accX25RcvRestartReqs Counter
  accX25RcvRestartConfs Counter
  accX25RcvCallReqs Counter
  accX25RcvCallAccs Counter
  accX25RcvClrReqs Counter
  accX25RcvClrConfs Counter
  accX25RcvResetReqs Counter
  accX25RcvResetConfs Counter
  accX25RcvInts Counter
  accX25RcvIntConfs Counter
  accX25RcvRRs Counter
  accX25RcvRNRs Counter
  accX25RcvDatas Counter
  accX25XmtDiags Counter
  accX25XmtRestartReqs Counter
  accX25XmtRestartConfs Counter
  accX25XmtCallReqs Counter
  accX25XmtCallAccs Counter
  accX25XmtClrReqs Counter
  accX25XmtClrConfs Counter
  accX25XmtResetReqs Counter
  accX25XmtResetConfs Counter
  accX25XmtInts Counter
  accX25XmtIntConfs Counter
  accX25XmtRRs Counter
  accX25XmtRNRs Counter
  accX25XmtDatas Counter
  accX25OpenSvcCounts Counter

AccX25XotParmEntry  
SEQUENCE    
  accX25XotParmLine INTEGER
  accX25XotParmIpAddress IpAddress
  accX25XotParmMsgLevel INTEGER

AccX25XotConnEntry  
SEQUENCE    
  accX25XotConnLine INTEGER
  accX25XotConnLcn INTEGER
  accX25XotConnState INTEGER
  accX25XotConnType INTEGER
  accX25XotConnIpAddress NetworkAddress
  accX25XotConnTcpPortNumber INTEGER
  accX25XotConnRemoteIpAddress NetworkAddress
  accX25XotConnRemoteTCPPortNumber INTEGER
  accX25XotConnRcvEncaps Counter
  accX25XotConnXmtEncaps Counter

AccX25XotStatsEntry  
SEQUENCE    
  accX25XotStatsLine INTEGER
  accX25XotStatsTotalConnections Counter
  accX25XotStatsActiveConnections Gauge
  accX25XotStatsRcvInvalids Counter
  accX25XotStatsGenClearReqs Counter
  accX25XotStatsGenResetReqs Counter
  accX25XotStatsGenPvcSetups Counter
  accX25XotStatsRcvValids Counter
  accX25XotStatsXmtTotals Counter

AccX25OptFacEntry  
SEQUENCE    
  accX25OptFacIndex INTEGER
  accX25OptFacString OCTET STRING

AccX25PvcAddrEntry  
SEQUENCE    
  accX25PvcLine INTEGER
  accX25PvcAddrLcid INTEGER
  accX25PvcAddrString DisplayString
  accX25PvcProtocol INTEGER

AccX25EventEntry  
SEQUENCE    
  accX25EventSeq INTEGER
  accX25EventLine INTEGER
  accX25EventLCID INTEGER
  accX25EventUpTime TimeTicks
  accX25EventCode OCTET STRING
  accX25EventCause INTEGER
  accX25EventProtocol INTEGER
  accX25EventDiag INTEGER
  accX25EventPacket OCTET STRING

AccX25CircuitEntry  
SEQUENCE    
  accX25CircuitLine INTEGER
  accX25CircuitLCID INTEGER
  accX25CircuitType INTEGER
  accX25CircuitRemoteAddr OCTET STRING
  accX25CircuitLocalAddr OCTET STRING
  accX25CircuitState INTEGER
  accX25CircuitPktTimer INTEGER
  accX25CircuitPktRetry INTEGER

AccX25SwitchConnEntry  
SEQUENCE    
  accX25SwitchConnCallingIfIndex INTEGER
  accX25SwitchConnCallingIndex INTEGER
  accX25SwitchConnCallingType INTEGER
  accX25SwitchConnCallingX121Addr OCTET STRING
  accX25SwitchConnCallingPkts Counter
  accX25SwitchConnCallingOctets Counter
  accX25SwitchConnCalledIfIndex INTEGER
  accX25SwitchConnCalledIndex INTEGER
  accX25SwitchConnCalledType INTEGER
  accX25SwitchConnCalledX121Addr OCTET STRING
  accX25SwitchConnCalledPkts Counter
  accX25SwitchConnCalledOctets Counter
  accX25SwitchConnState INTEGER

AccX25SwitchAddrTransEntry  
SEQUENCE    
  accX25SwitchAddrTransIfIndex INTEGER
  accX25SwitchAddrTransDir INTEGER
  accX25SwitchAddrTransType INTEGER
  accX25SwitchAddrTransPattern DisplayString
  accX25SwitchAddrTransReplace DisplayString
  accX25SwitchAddrTransStatus INTEGER

AccX25SwitchRouteEntry  
SEQUENCE    
  accX25SwitchRoutePattern OCTET STRING
  accX25SwitchRouteIfIndex INTEGER
  accX25SwitchRouteStatus INTEGER

AccX25SwitchExtRtEntry  
SEQUENCE    
  accX25SwitchExtRtIndex INTEGER
  accX25SwitchExtRtIfIn INTEGER
  accX25SwitchExtRtAddr OCTET STRING
  accX25SwitchExtRtCUD OCTET STRING
  accX25SwitchExtRtDisp INTEGER
  accX25SwitchExtRtIfOut INTEGER
  accX25SwitchExtRtStatus INTEGER

Defined Values

accX25 1.3.6.1.4.1.5.1.1.17
OBJECT IDENTIFIER    

accX25AtTable 1.3.6.1.4.1.5.1.1.17.1
Address translation table for X.25 interfaces. This is a superset of the standard address translation table. Entries are added/deleted via management action.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccX25AtEntry

accX25AtEntry 1.3.6.1.4.1.5.1.1.17.1.1
Address translation entry for X.25 interfaces.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AccX25AtEntry  

accX25AtIfIndex 1.3.6.1.4.1.5.1.1.17.1.1.1
Interface number (ifIndex) for which this translation entry is valid.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accX25AtIpAddress 1.3.6.1.4.1.5.1.1.17.1.1.2
IP Address of this entry Set this object to NULL to delete entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  NetworkAddress  

accX25AtNetInOutAddr 1.3.6.1.4.1.5.1.1.17.1.1.3
X.25 address to use when calling this destination. (both X.25 addresses are checked when mapping an X.25 address to an IP address) Object required in entry-adding SET PDU.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

accX25AtNetInAddr 1.3.6.1.4.1.5.1.1.17.1.1.4
Alternate X.25 address to check when mapping an X.25 address to an IP address Object will be set to default value if not present in entry-adding SET PDU.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

accX25AtNetFacIndex 1.3.6.1.4.1.5.1.1.17.1.1.5
Index of optional facility string or 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

accX25SubnetParmTable 1.3.6.1.4.1.5.1.1.17.2
Per-network parameters for IP networks attached via X.25 interface. Entries added/deleted via management action.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccX25SubnetParmEntry

accX25SubnetParmEntry 1.3.6.1.4.1.5.1.1.17.2.1
X.25-specific parameters for this IP network
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AccX25SubnetParmEntry  

accX25SubnetAddr 1.3.6.1.4.1.5.1.1.17.2.1.1
Network/subnet number of IP network Set this object to NULL to delete entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

accX25Facility 1.3.6.1.4.1.5.1.1.17.2.1.2
selects whether DDN Standard Mode facility is included in call requests.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), std(2)  

accX25PktNegot 1.3.6.1.4.1.5.1.1.17.2.1.3
specifies value for Packet Size Negotiation Facility (power of 2 between 16 and 1024), or zero if Packet Size Negotiation Facility is not to be used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accX25WindowNegot 1.3.6.1.4.1.5.1.1.17.2.1.4
specifies value for Window Size Negotiation Facility (between 1 and 127 inclusive), or zero if Window Size Negotiation Facility is not to be used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accX25PortParmTable 1.3.6.1.4.1.5.1.1.17.3
Per-port parameters for X.25 interfaces.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccX25PortParmEntry

accX25PortParmEntry 1.3.6.1.4.1.5.1.1.17.3.1
X25 parameters of a specific port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AccX25PortParmEntry  

accX25PortParmIndex 1.3.6.1.4.1.5.1.1.17.3.1.1
Port number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accX25AddrMode 1.3.6.1.4.1.5.1.1.17.3.1.2
specifies address translation technique.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER table(1), ddn(2), bfe(3)  

accX25PktSize 1.3.6.1.4.1.5.1.1.17.3.1.3
specifies default data packet size for this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accX25PktWind 1.3.6.1.4.1.5.1.1.17.3.1.4
specifies default packet window size for this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accX25SvcNumber 1.3.6.1.4.1.5.1.1.17.3.1.5
specifies maximum number of switched virtual circuits to be used on this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accX25SvcBase 1.3.6.1.4.1.5.1.1.17.3.1.6
specifies lowest Logical Channel Identifier to be used for switched virtual circuits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accX25ExtendClr 1.3.6.1.4.1.5.1.1.17.3.1.7
specifies whether extended format for call clearing packets (as defined by X.25-1984) is permitted
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

accX25ExtendSeq 1.3.6.1.4.1.5.1.1.17.3.1.8
Use of extended sequence numbers
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), extended(2)  

accX25IdleMin 1.3.6.1.4.1.5.1.1.17.3.1.9
minimum idle time for closing circuits; a circuit will not be cleared until it has been idle (no data has been sent or received) for at least this amount of time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeTicks  

accX25IdleMax 1.3.6.1.4.1.5.1.1.17.3.1.10
maximum idle time for closing circuits; a circuit will be cleared when its idle time exceeds this value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeTicks  

accX25IdleScale 1.3.6.1.4.1.5.1.1.17.3.1.11
scale factor for idle timeout: a circuit will be cleared when it has been idle for accX25IdleMin plus accX25IdleScale times the number of available circuits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeTicks  

accX25SvcMax 1.3.6.1.4.1.5.1.1.17.3.1.12
Maximum number of virtual circuits which can be opened to a single destination.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accX25SvcLimit 1.3.6.1.4.1.5.1.1.17.3.1.13
Maximum number of switched virtual circuits that IP can use. The value must not exceed the total number of logical channels available on this trunk.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accX25OpenThresh 1.3.6.1.4.1.5.1.1.17.3.1.14
Threshold (number of IP datagrams queued per circuit) at which an additional virtual circuit will be opened.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accX25SvcMin 1.3.6.1.4.1.5.1.1.17.3.1.15
The minimum number of virtual circuits which IP will leave available for first circuits to other destinations
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accX25SvcDelay 1.3.6.1.4.1.5.1.1.17.3.1.16
Delay (seconds) between opening of successive virtual circuits to same destination.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accX25InitBackoff 1.3.6.1.4.1.5.1.1.17.3.1.17
Initial backoff time (seconds) to delay before next attempt to open an additional virtual circuit to the same destination when an attempt to do so has failed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accX25MaxBackoff 1.3.6.1.4.1.5.1.1.17.3.1.18
Maximum backoff time (seconds) to delay between subsequent attempts to open additional virtual circuits to the same destination. The actual delay is varied exponentially from accX25InitBackoff up to this value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accX25OurAddress 1.3.6.1.4.1.5.1.1.17.3.1.19
Our X25 address (put in outbound packets)
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

accX25PvcBase 1.3.6.1.4.1.5.1.1.17.3.1.20
Lowest LCID to be used for PVCs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accX25PvcNumber 1.3.6.1.4.1.5.1.1.17.3.1.21
Maximum number of PVCs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accX25Tx0Timer 1.3.6.1.4.1.5.1.1.17.3.1.22
Value for T10 (DCE) or T20 (DTE) timer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeTicks  

accX25Tx1Timer 1.3.6.1.4.1.5.1.1.17.3.1.23
Value for T11 (DCE) or T21 (DTE) timer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeTicks  

accX25Tx2Timer 1.3.6.1.4.1.5.1.1.17.3.1.24
Value for T12 (DCE) or T22 (DTE) timer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeTicks  

accX25Tx3Timer 1.3.6.1.4.1.5.1.1.17.3.1.25
Value for T13 (DCE) or T23 (DTE) timer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeTicks  

accX25PortEventSeverityLevel 1.3.6.1.4.1.5.1.1.17.3.1.26
The base severity level which events are recorded.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..7  

accX25PktStatTable 1.3.6.1.4.1.5.1.1.17.4
Per-port packet statistics for X.25 interfaces.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccX25PktStatEntry

accX25PktStatEntry 1.3.6.1.4.1.5.1.1.17.4.1
X.25 packet level statistics for an X.25 interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AccX25PktStatEntry  

accX25PktIndex 1.3.6.1.4.1.5.1.1.17.4.1.1
Port number of this X.25 interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accX25RcvDiags 1.3.6.1.4.1.5.1.1.17.4.1.2
Number of Diagnostic packets received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25RcvRestartReqs 1.3.6.1.4.1.5.1.1.17.4.1.3
Number of Restart Request (Restart Indication) packets received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25RcvRestartConfs 1.3.6.1.4.1.5.1.1.17.4.1.4
Number of Restart Confirmation packets received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25RcvCallReqs 1.3.6.1.4.1.5.1.1.17.4.1.5
Number of Call Request (Incoming Call) packets received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25RcvCallAccs 1.3.6.1.4.1.5.1.1.17.4.1.6
Number of Call Accepted (Call Connected) packets received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25RcvClrReqs 1.3.6.1.4.1.5.1.1.17.4.1.7
Number of Clear Request (Clear Indication) packets received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25RcvClrConfs 1.3.6.1.4.1.5.1.1.17.4.1.8
Number of Clear Confirmation packets received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25RcvResetReqs 1.3.6.1.4.1.5.1.1.17.4.1.9
Number of Reset Request (Reset Indication) packets received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25RcvResetConfs 1.3.6.1.4.1.5.1.1.17.4.1.10
Number of Reset Confirmation packets received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25RcvInts 1.3.6.1.4.1.5.1.1.17.4.1.11
Number of Interrupt packets received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25RcvIntConfs 1.3.6.1.4.1.5.1.1.17.4.1.12
Number of Interrupt Confirmation packets received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25RcvRRs 1.3.6.1.4.1.5.1.1.17.4.1.13
Number of RR [Receive Ready] packets received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25RcvRNRs 1.3.6.1.4.1.5.1.1.17.4.1.14
Number of RNR [Receive Not Ready] packets received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25RcvDatas 1.3.6.1.4.1.5.1.1.17.4.1.15
Number of Data packets received on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25XmtDiags 1.3.6.1.4.1.5.1.1.17.4.1.16
Number of Diagnostic packets transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25XmtRestartReqs 1.3.6.1.4.1.5.1.1.17.4.1.17
Number of Restart Request (Restart Indication) packets transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25XmtRestartConfs 1.3.6.1.4.1.5.1.1.17.4.1.18
Number of Restart Confirmation packets transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25XmtCallReqs 1.3.6.1.4.1.5.1.1.17.4.1.19
Number of Call Request (Incoming Call) packets transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25XmtCallAccs 1.3.6.1.4.1.5.1.1.17.4.1.20
Number of Call Accepted (Call Connected) packets transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25XmtClrReqs 1.3.6.1.4.1.5.1.1.17.4.1.21
Number of Clear Request (Clear Indication) packets transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25XmtClrConfs 1.3.6.1.4.1.5.1.1.17.4.1.22
Number of Clear Confirmation packets transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25XmtResetReqs 1.3.6.1.4.1.5.1.1.17.4.1.23
Number of Reset Request (Reset Indication) packets transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25XmtResetConfs 1.3.6.1.4.1.5.1.1.17.4.1.24
Number of Reset Confirmation packets transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25XmtInts 1.3.6.1.4.1.5.1.1.17.4.1.25
Number of Interrupt packets transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25XmtIntConfs 1.3.6.1.4.1.5.1.1.17.4.1.26
Number of Interrupt Confirmation packets transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25XmtRRs 1.3.6.1.4.1.5.1.1.17.4.1.27
Number of RR [Receive Ready] packets transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25XmtRNRs 1.3.6.1.4.1.5.1.1.17.4.1.28
Number of RNR [Receive Not Ready] packets transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25XmtDatas 1.3.6.1.4.1.5.1.1.17.4.1.29
Number of Data packets transmitted on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25OpenSvcCounts 1.3.6.1.4.1.5.1.1.17.4.1.30
Count of SVCs open on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25Xot 1.3.6.1.4.1.5.1.1.17.12
OBJECT IDENTIFIER    

accX25XotParmTable 1.3.6.1.4.1.5.1.1.17.12.1
XOT parameter table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccX25XotParmEntry

accX25XotParmEntry 1.3.6.1.4.1.5.1.1.17.12.1.1
The entry part of accX25XotParmEntry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AccX25XotParmEntry  

accX25XotParmLine 1.3.6.1.4.1.5.1.1.17.12.1.1.1
Virtual port for which this entry applies.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accX25XotParmIpAddress 1.3.6.1.4.1.5.1.1.17.12.1.1.2
IP Address for virtual port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

accX25XotParmMsgLevel 1.3.6.1.4.1.5.1.1.17.12.1.1.3
Debug message level for virtual port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accX25XotConnTable 1.3.6.1.4.1.5.1.1.17.12.2
This Table contains objects which report information about the X.25 XOT calls currently being switched through this router.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccX25XotConnEntry

accX25XotConnEntry 1.3.6.1.4.1.5.1.1.17.12.2.1
The entry part of accX25XotConnEntry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AccX25XotConnEntry  

accX25XotConnLine 1.3.6.1.4.1.5.1.1.17.12.2.1.1
Virtual port for which this entry applies.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accX25XotConnLcn 1.3.6.1.4.1.5.1.1.17.12.2.1.2
The LCN of the virtual circuit for the initiating interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accX25XotConnState 1.3.6.1.4.1.5.1.1.17.12.2.1.3
An integer that indicates the state of the circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER waitCallConfirm(1), clearProcActive(2), clearProcComplete(3), tcpCongested(4), tcpConnRefused(9), tcpConnInProgress(16), waitPvcSetupConfirm(17), connected(18), noDestInterface(19), destInterfaceNotUp(20), destInterfaceNotX25(21), noDestPvc(22), destPvcCfgMismatch(23), flowControlMismatch(24), flowControlValuesNotSupported(25), pvcSetupProtocolError(26)  

accX25XotConnType 1.3.6.1.4.1.5.1.1.17.12.2.1.4
An integer that indicates the circuit type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER incoming(1), outgoing(2), pvc(3)  

accX25XotConnIpAddress 1.3.6.1.4.1.5.1.1.17.12.2.1.5
IP Address for this XOT.
Status: mandatory Access: read-only
OBJECT-TYPE    
  NetworkAddress  

accX25XotConnTcpPortNumber 1.3.6.1.4.1.5.1.1.17.12.2.1.6
TCP port number for this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accX25XotConnRemoteIpAddress 1.3.6.1.4.1.5.1.1.17.12.2.1.7
IP Address for the remote XOT.
Status: mandatory Access: read-write
OBJECT-TYPE    
  NetworkAddress  

accX25XotConnRemoteTCPPortNumber 1.3.6.1.4.1.5.1.1.17.12.2.1.8
remote TCP port number for this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accX25XotConnRcvEncaps 1.3.6.1.4.1.5.1.1.17.12.2.1.9
The total number of encapsulated packets received by the XOT for this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25XotConnXmtEncaps 1.3.6.1.4.1.5.1.1.17.12.2.1.10
The total number of encapsulated packets transmitted by the XOT for this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25XotStatsTable 1.3.6.1.4.1.5.1.1.17.12.4
This Table contains objexts which report the accumulated counts for X.25 packet activity and TCP connections for an XOT virtual port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccX25XotStatsEntry

accX25XotStatsEntry 1.3.6.1.4.1.5.1.1.17.12.4.1
The entry part of accX25XotStatsEntry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AccX25XotStatsEntry  

accX25XotStatsLine 1.3.6.1.4.1.5.1.1.17.12.4.1.1
Virtual port for which this entry applies.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accX25XotStatsTotalConnections 1.3.6.1.4.1.5.1.1.17.12.4.1.2
The total number of TCP connections for the XOT on this router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25XotStatsActiveConnections 1.3.6.1.4.1.5.1.1.17.12.4.1.3
The current number of active TCP connections for the XOT on this router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

accX25XotStatsRcvInvalids 1.3.6.1.4.1.5.1.1.17.12.4.1.4
The total number of invalid packets received by the XOT from TCP connections on this router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25XotStatsGenClearReqs 1.3.6.1.4.1.5.1.1.17.12.4.1.5
The total number of clear packets generated by the XOT.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25XotStatsGenResetReqs 1.3.6.1.4.1.5.1.1.17.12.4.1.6
The total number of reset packets generated by the XOT.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25XotStatsGenPvcSetups 1.3.6.1.4.1.5.1.1.17.12.4.1.7
The total number of PVC setup packets generated by the XOT on this virtual port
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25XotStatsRcvValids 1.3.6.1.4.1.5.1.1.17.12.4.1.8
The total number of valid packets received by the XOT from TCP connections on this router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25XotStatsXmtTotals 1.3.6.1.4.1.5.1.1.17.12.4.1.9
The total number of packets transmitted by the XOT over TCP connections on this router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25OptFacTable 1.3.6.1.4.1.5.1.1.17.5
Optional facility string table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccX25OptFacEntry

accX25OptFacEntry 1.3.6.1.4.1.5.1.1.17.5.1
A single optional facility entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AccX25OptFacEntry  

accX25OptFacIndex 1.3.6.1.4.1.5.1.1.17.5.1.1
Index of this entry in table [1..n].
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accX25OptFacString 1.3.6.1.4.1.5.1.1.17.5.1.2
facility string to be added when placing calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

accX25PvcAddrTable 1.3.6.1.4.1.5.1.1.17.6
PVC to X.25 address mapping table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccX25PvcAddrEntry

accX25PvcAddrEntry 1.3.6.1.4.1.5.1.1.17.6.1
A single PVC to X.25 address mapping entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AccX25PvcAddrEntry  

accX25PvcLine 1.3.6.1.4.1.5.1.1.17.6.1.1
Physical port for which this entry applies. Same is ifIndex.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accX25PvcAddrLcid 1.3.6.1.4.1.5.1.1.17.6.1.2
PVC logical channel ID .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accX25PvcAddrString 1.3.6.1.4.1.5.1.1.17.6.1.3
X.25 address to associate with this PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

accX25PvcProtocol 1.3.6.1.4.1.5.1.1.17.6.1.4
PVC Protocol Associated with this line and the LCID .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ip(1), appletalk(2), decnet(3), idp(4), ipx(5), bridging(6), sourcerouting(7)  

accX25EventLogSize 1.3.6.1.4.1.5.1.1.17.9
The number of entries to maintain in the event table
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accX25EventTable 1.3.6.1.4.1.5.1.1.17.10
Event and exception logging table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccX25EventEntry

accX25EventEntry 1.3.6.1.4.1.5.1.1.17.10.1
A single event or exception record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AccX25EventEntry  

accX25EventSeq 1.3.6.1.4.1.5.1.1.17.10.1.1
A unique sequential number for the logged event.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accX25EventLine 1.3.6.1.4.1.5.1.1.17.10.1.2
Physical port which encountered the event.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accX25EventLCID 1.3.6.1.4.1.5.1.1.17.10.1.3
The logical circuit id for the circuit which encountered the event.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accX25EventUpTime 1.3.6.1.4.1.5.1.1.17.10.1.4
SysUpTime when event occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

accX25EventCode 1.3.6.1.4.1.5.1.1.17.10.1.5
Code indicating the type of event being logged.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

accX25EventCause 1.3.6.1.4.1.5.1.1.17.10.1.6
Cause octet from close packet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accX25EventDiag 1.3.6.1.4.1.5.1.1.17.10.1.7
Diagnostic octet from close packet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accX25EventProtocol 1.3.6.1.4.1.5.1.1.17.10.1.8
Protocol which encountered the event.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accX25EventPacket 1.3.6.1.4.1.5.1.1.17.10.1.9
Packet that triggered the log entry (if available).
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

accX25CircuitTable 1.3.6.1.4.1.5.1.1.17.11
The X.25 Circuit information table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccX25CircuitEntry

accX25CircuitEntry 1.3.6.1.4.1.5.1.1.17.11.1
A single Circuit information record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AccX25CircuitEntry  

accX25CircuitLine 1.3.6.1.4.1.5.1.1.17.11.1.1
Physical port on which the circuit is established.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accX25CircuitLCID 1.3.6.1.4.1.5.1.1.17.11.1.2
The logical circuit ID also called the logical channel number (LCN).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4095  

accX25CircuitType 1.3.6.1.4.1.5.1.1.17.11.1.3
The type of circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER incoming(1), outgoing(2), pvc(3)  

accX25CircuitRemoteAddr 1.3.6.1.4.1.5.1.1.17.11.1.4
X.25 remote address associated with this circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

accX25CircuitLocalAddr 1.3.6.1.4.1.5.1.1.17.11.1.5
X.25 local address associated with this circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

accX25CircuitState 1.3.6.1.4.1.5.1.1.17.11.1.6
Current state of the circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER p1-ready(1), p2-dte-call-req(2), p3-dxe-inc-call(3), d1-flow-ctl-rdy(4), d2-dte-reset-req(5), d3-dxe-reset-ind(6), p5-call-collision(7), p6-dte-clr-req(8), p7-dxe-clr-ind(9), r2-dte-restart-req(10), r3-dxe-restart-ind(11), pvc(12)  

accX25CircuitPktTimer 1.3.6.1.4.1.5.1.1.17.11.1.7
Packet level timeout value for this circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accX25CircuitPktRetry 1.3.6.1.4.1.5.1.1.17.11.1.8
Packet level retry count for this circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accX25Switch 1.3.6.1.4.1.5.1.1.17.8
OBJECT IDENTIFIER    

accX25SwitchStatus 1.3.6.1.4.1.5.1.1.17.8.1
This Object controls whether X.25 switching is enabled or disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

accX25SwitchConnections 1.3.6.1.4.1.5.1.1.17.8.2
This Object indicates the current number of X.25 connections that are being switched through this router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

accX25SwitchCallSucceeds 1.3.6.1.4.1.5.1.1.17.8.3
This Object indicates the total number of X.25 calls that have been switched by this router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25SwitchCallFails 1.3.6.1.4.1.5.1.1.17.8.4
This Object indicates the total number of X.25 calls that this router has been unable to switch.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25SwitchConnTable 1.3.6.1.4.1.5.1.1.17.8.5
This Table contains objects which report information about the X.25 calls currently being switched through this router.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccX25SwitchConnEntry

accX25SwitchConnEntry 1.3.6.1.4.1.5.1.1.17.8.5.1
The entry part of accX25SwitchConnTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AccX25SwitchConnEntry  

accX25SwitchConnCallingIfIndex 1.3.6.1.4.1.5.1.1.17.8.5.1.1
An Integer that identifies the row of the system wide interfaces table associated with the X.25 interface which initiated the connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accX25SwitchConnCallingIndex 1.3.6.1.4.1.5.1.1.17.8.5.1.2
An Integer that uniquely identifies the virtual circuit for the initiating interface. For X.25 ports, this will be the LCN. For the TCP ports, this will be the remote port number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accX25SwitchConnCallingType 1.3.6.1.4.1.5.1.1.17.8.5.1.3
An integer that indicates the calling type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), x25(2), tcp(3)  

accX25SwitchConnCallingX121Addr 1.3.6.1.4.1.5.1.1.17.8.5.1.4
A string that contains the Calling X.121 address that initiated the connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

accX25SwitchConnCallingPkts 1.3.6.1.4.1.5.1.1.17.8.5.1.5
A counter which keeps track of the number of packets sent from the calling to the called port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25SwitchConnCallingOctets 1.3.6.1.4.1.5.1.1.17.8.5.1.6
A counter which keeps track of the number of octets sent from the calling to the called port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25SwitchConnCalledIfIndex 1.3.6.1.4.1.5.1.1.17.8.5.1.7
An Integer that identifies the row of the system wide interfaces table associated with the X.25 interface which propagated the connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accX25SwitchConnCalledIndex 1.3.6.1.4.1.5.1.1.17.8.5.1.8
An Integer that uniquely identifies the virtual circuit for the outgoing interface. For X.25 ports, this will be the LCN. For the TCP ports, this will be the local port number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accX25SwitchConnCalledType 1.3.6.1.4.1.5.1.1.17.8.5.1.9
An integer that indicates the called type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), x25(2), tcp(3)  

accX25SwitchConnCalledX121Addr 1.3.6.1.4.1.5.1.1.17.8.5.1.10
A string that contains the Called X.121 address that initiated the connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

accX25SwitchConnCalledPkts 1.3.6.1.4.1.5.1.1.17.8.5.1.11
A counter which keeps track of the number of packets sent from the calling to the called port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25SwitchConnCalledOctets 1.3.6.1.4.1.5.1.1.17.8.5.1.12
A counter which keeps track of the number of octets sent from the calling to the called port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accX25SwitchConnState 1.3.6.1.4.1.5.1.1.17.8.5.1.13
An integer that indicates the state of the switched X.25 circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER open(1), calling(2), clearing(3), resetting(4)  

accX25SwitchAddrTransTable 1.3.6.1.4.1.5.1.1.17.8.6
This Table contains objects which control the translation of X.121 addresses.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccX25SwitchAddrTransEntry

accX25SwitchAddrTransEntry 1.3.6.1.4.1.5.1.1.17.8.6.1
The entry part for the AddrTrans Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AccX25SwitchAddrTransEntry  

accX25SwitchAddrTransIfIndex 1.3.6.1.4.1.5.1.1.17.8.6.1.1
An Integer that identifies the row of the system wide interfaces table associated with the X.25 interface that receives the call request.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accX25SwitchAddrTransDir 1.3.6.1.4.1.5.1.1.17.8.6.1.2
An Integer that identifies whether this entry applies to inbound or to outbound switched X.25 calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER inbound(1), outbound(2)  

accX25SwitchAddrTransType 1.3.6.1.4.1.5.1.1.17.8.6.1.3
An Integer that identifies whether this entry applies to called or to calling X.121 addresses.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER called(1), calling(2)  

accX25SwitchAddrTransPattern 1.3.6.1.4.1.5.1.1.17.8.6.1.4
A character string which defines the matching pattern for incoming called X.121 addresses.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

accX25SwitchAddrTransReplace 1.3.6.1.4.1.5.1.1.17.8.6.1.5
A character string which defines the replacement pattern for incoming called X.121 addresses.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

accX25SwitchAddrTransStatus 1.3.6.1.4.1.5.1.1.17.8.6.1.6
An Integer that defines the status of the table row.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

accX25SwitchRouteTable 1.3.6.1.4.1.5.1.1.17.8.7
This Table contains objects which determine the switching of incoming X.25 calls.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccX25SwitchRouteEntry

accX25SwitchRouteEntry 1.3.6.1.4.1.5.1.1.17.8.7.1
The entry part for the Route Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AccX25SwitchRouteEntry  

accX25SwitchRoutePattern 1.3.6.1.4.1.5.1.1.17.8.7.1.1
A character string which defines the matching pattern for the incoming called X.121 addresses.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

accX25SwitchRouteIfIndex 1.3.6.1.4.1.5.1.1.17.8.7.1.2
An Integer that identifies the row of the system wide interfaces table associated with the X.25 interface which receives the call request.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accX25SwitchRouteStatus 1.3.6.1.4.1.5.1.1.17.8.7.1.3
An Integer that defines the status of the table row.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

accX25SwitchExtRtTable 1.3.6.1.4.1.5.1.1.17.8.8
This Table contains an extended set of objects which determine the switching of incoming X.25 calls.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccX25SwitchExtRtEntry

accX25SwitchExtRtEntry 1.3.6.1.4.1.5.1.1.17.8.8.1
The entry part for the Extended Route Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AccX25SwitchExtRtEntry  

accX25SwitchExtRtIndex 1.3.6.1.4.1.5.1.1.17.8.8.1.1
An Integer that uniquely identifies this row of the Extended Switching Table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accX25SwitchExtRtIfIn 1.3.6.1.4.1.5.1.1.17.8.8.1.2
An Integer that identifies the row of the system wide interfaces table associated with the X.25 interface which receives the call request. This column must match the interface that the call is received on before a match can be made. A value of zero will match calls received from any interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accX25SwitchExtRtAddr 1.3.6.1.4.1.5.1.1.17.8.8.1.3
A character string which defines the matching pattern for the incoming called X.121 addresses.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

accX25SwitchExtRtCUD 1.3.6.1.4.1.5.1.1.17.8.8.1.4
A octet string which defines the matching pattern for the incoming Call User Data. A zero length octet string matches any Call User Data contents (including none).
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

accX25SwitchExtRtDisp 1.3.6.1.4.1.5.1.1.17.8.8.1.5
An Integer that specifies the disposition of incoming calls that match this table entry. A value of 'switch' causes matching calls to be switched out the interface specified by accX25SwitchExtRtIfOut. A value of 'local' causes the call to be processed for local call termination. A value of 'reject' causes the call to be cleared.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER switch(1), local(2), reject(3)  

accX25SwitchExtRtIfOut 1.3.6.1.4.1.5.1.1.17.8.8.1.6
An Integer that identifies the row of the system wide interfaces table associated with the X.25 interface to which the call will be switched. This column is only significant when the disposition is 'switch'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accX25SwitchExtRtStatus 1.3.6.1.4.1.5.1.1.17.8.8.1.7
An Integer that defines the status of the table row.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)