ACC-STP

File: ACC-STP.mib (6078 bytes)

Imported modules

RFC1155-SMI RFC-1215 ACC-SYSTEM
ACC-MIB

Imported symbols

OBJECT-TYPE IpAddress TimeTicks
Gauge Counter TRAP-TYPE
accTrapLogSeqNum accBRG DisplayString

Defined Values

accStp 1.3.6.1.4.1.5.1.1.2
OBJECT IDENTIFIER    

accStpPriority 1.3.6.1.4.1.5.1.1.2.1
Among all devices participating in spanning tree, the one with the highest priority (numerically lowest value of this parameter) is elected as the Root of the spanning tree.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

accStpId 1.3.6.1.4.1.5.1.1.2.2
Unique bridge identifier of this bridge. This object comprises two parts, one of which is the MAC address, and the other of which is the brStpPriority and is the more significant part in priority comparisons.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

accStpBrAddr 1.3.6.1.4.1.5.1.1.2.3
MAC address of this bridge.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

accStpMode 1.3.6.1.4.1.5.1.1.2.4
State of this Bridge's participation in Spanning Tree. Spanning Tree takes care of network connectivity changes caused by addition/removal/failure of links. It avoids loops when any two networks have redundant connections between them.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

accStpFilterTime 1.3.6.1.4.1.5.1.1.2.5
Minimum time period elapsing between the transmission of Hello frames through a given Bridge Port. No more than two Hello frames shall be transmitted in any brStpFilterTime period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

accStpMcastAddr 1.3.6.1.4.1.5.1.1.2.6
A unique MAC group address, recognised by all the Bridges within the Bridged Local Area Network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

accStpTopChangeDet 1.3.6.1.4.1.5.1.1.2.7
Indicates if this unit has detected the Topology change indication in the hello BPDU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

accStpTopChange 1.3.6.1.4.1.5.1.1.2.8
Indicates if the STP topology of a network is in process of changing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

accStpTopChangeTimer 1.3.6.1.4.1.5.1.1.2.9
This timer serves to determine the time period for which hello frames are transmitted with the Topology Change flag parameter set by the Bridge when it is the Root following the detection of a topology change.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

accStpDesRoot 1.3.6.1.4.1.5.1.1.2.10
The Bridge Identifier of the device currently assumed by this unit to be the Root.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

accStpRootPathCost 1.3.6.1.4.1.5.1.1.2.11
Current path cost to the Root Bridge.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accStpRootPort 1.3.6.1.4.1.5.1.1.2.12
Port Number of the one Port in the direction of the Root. (Value is meaningless if this unit is the Root).
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

accStpMaxAge 1.3.6.1.4.1.5.1.1.2.13
The value of the Max Age parameter when the Bridge is the Root or attempting to become the Root. The Max Age parameter is conveyed to ensure that each Bridge in a Bridged Local Area Network has a consistent value against which to test the age of stored protocol information.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 4..3600  

accStpHelloTime 1.3.6.1.4.1.5.1.1.2.14
Interval between Hello frames that this Bridge will initiate when it is Root or is attempting to be Root.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..1800  

accStpForwardDelay 1.3.6.1.4.1.5.1.1.2.15
The time (seconds) spent in the Listening state while moving from the Blocking state to the Learning state. The time (seconds) spent in the Learning state while moving from the Listening state to the Forwarding state. The value (seconds) used for the ageing time of dynamic entries in the Forwarding Database table wile the Topology Change flag is set in protocol messages received from the Root.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..3600  

accStpUpTime 1.3.6.1.4.1.5.1.1.2.16
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

accStpTopChangeCnts 1.3.6.1.4.1.5.1.1.2.17
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter