A3COM-SWITCHING-SYSTEMS-FDDI-MIB

File: A3COM-SWITCHING-SYSTEMS-FDDI-MIB.mib (33454 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC-1215
FDDI-SMT73-MIB

Imported symbols

enterprises Counter OBJECT-TYPE
TRAP-TYPE FddiTimeNano FddiSMTStationIdType
fddimibSMTStationId fddimibSMTCFState fddimibSMTPeerWrapFlag
fddimibMACDaFlag fddimibMACUnaDaFlag fddimibMACFrameErrorFlag
fddimibMACFrameCts fddimibMACErrorCts fddimibMACLostCts
fddimibMACSMTAddress fddimibMACNotCopiedCts fddimibMACCopiedCts
fddimibMACNotCopiedFlag fddimibMACOldUpstreamNbr fddimibMACFrameErrorRatio
fddimibMACUpstreamNbr fddimibMACNotCopiedRatio fddimibMACDownstreamNbr
fddimibMACOldDownstreamNbr fddimibMACCurrentPath fddimibMACAvailablePaths
fddimibMACRequestedPaths fddimibPORTLerCutoff fddimibPORTLerAlarm
fddimibPORTLerEstimate fddimibPORTLemRejectCts fddimibPORTLemCts
fddimibPORTLerFlag fddimibPORTMyType fddimibPORTConnectState
fddimibPORTNeighborType fddimibPORTPCWithhold fddimibPORTAvailablePaths
fddimibPORTCurrentPath fddimibPORTRequestedPaths

Defined Types

A3ComFddiSMTEntry  
SEQUENCE    
  a3ComFddiSMTIndex INTEGER
  a3ComFddiSMTManufacturerOUI OCTET STRING
  a3ComFddiSMTManufacturerData OCTET STRING
  a3ComFddiSMTHoldState INTEGER
  a3ComFddiSMTSetCount INTEGER
  a3ComFddiSMTLastSetStationId FddiSMTStationIdType

A3ComFddiMACBridgeFunctionEntry  
SEQUENCE    
  a3ComFddiMACBridgeFunctionSMTIndex INTEGER
  a3ComFddiMACBridgeFunctionMACIndex INTEGER
  a3ComFddiMACBridgeFunctions INTEGER

A3ComFddiMACTPriEntry  
SEQUENCE    
  a3ComFddiMACTPriSMTIndex INTEGER
  a3ComFddiMACTPriMACIndex INTEGER
  a3ComFddiMACTPri0 FddiTimeNano
  a3ComFddiMACTPri1 FddiTimeNano
  a3ComFddiMACTPri2 FddiTimeNano
  a3ComFddiMACTPri3 FddiTimeNano
  a3ComFddiMACTPri4 FddiTimeNano
  a3ComFddiMACTPri5 FddiTimeNano
  a3ComFddiMACTPri6 FddiTimeNano

A3ComFddiPATHRingEntry  
SEQUENCE    
  a3ComFddiPATHRingSMTIndex INTEGER
  a3ComFddiPATHRingPATHIndex INTEGER
  a3ComFddiPATHRingLatency FddiTimeNano
  a3ComFddiPATHTraceStatus INTEGER
  a3ComFddiPATHT-Rmode FddiTimeNano

A3ComFddiPATHSbaEntry  
SEQUENCE    
  a3ComFddiPATHSbaSMTIndex INTEGER
  a3ComFddiPATHSbaPATHIndex INTEGER
  a3ComFddiPATHSbaPayload INTEGER
  a3ComFddiPATHSbaOverhead INTEGER
  a3ComFddiPATHSbaAvailable INTEGER

A3ComFddiPORTEntry  
SEQUENCE    
  a3ComFddiPORTSMTIndex INTEGER
  a3ComFddiPORTIndex INTEGER
  a3ComFddiPORTMACLoopTime FddiTimeNano
  a3ComFddiPORTEBErrorCt Counter

A3ComFddiPORTLSEntry  
SEQUENCE    
  a3ComFddiPORTLSSMTIndex INTEGER
  a3ComFddiPORTLSPORTIndex INTEGER
  a3ComFddiPORTMaintLS INTEGER
  a3ComFddiPORTPCLS INTEGER

Defined Values

a3Com 1.3.6.1.4.1.43
OBJECT IDENTIFIER    

switchingSystemsMibs 1.3.6.1.4.1.43.29
OBJECT IDENTIFIER    

a3ComSwitchingSystemsFddiMib 1.3.6.1.4.1.43.29.10
OBJECT IDENTIFIER    

a3ComFddiSMT 1.3.6.1.4.1.43.29.10.1
OBJECT IDENTIFIER    

a3ComFddiMAC 1.3.6.1.4.1.43.29.10.2
OBJECT IDENTIFIER    

a3ComFddiPATH 1.3.6.1.4.1.43.29.10.3
OBJECT IDENTIFIER    

a3ComFddiPORT 1.3.6.1.4.1.43.29.10.4
OBJECT IDENTIFIER    

a3ComFddiSMTTable 1.3.6.1.4.1.43.29.10.1.1
A list of optional SMT entries. The number of entries shall not exceed the value of snmpFddiSMTNumber.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    A3ComFddiSMTEntry

a3ComFddiSMTEntry 1.3.6.1.4.1.43.29.10.1.1.1
An optional SMT entry containing information common to a given optional SMT.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  A3ComFddiSMTEntry  

a3ComFddiSMTIndex 1.3.6.1.4.1.43.29.10.1.1.1.1
A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

a3ComFddiSMTManufacturerOUI 1.3.6.1.4.1.43.29.10.1.1.1.2
The three octets of manufacturer data which make up the manufacturerOUI component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(3)  

a3ComFddiSMTManufacturerData 1.3.6.1.4.1.43.29.10.1.1.1.3
The 29 octets of manufacturer data which make up the manufacturerData component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(29)  

a3ComFddiSMTHoldState 1.3.6.1.4.1.43.29.10.1.1.1.4
This variable indicates the current state of the Hold function. The value 'not-holding' is the default and initial value. The value must be set to 'not-holding' as part of Active-Actions and when the conditions causing 'holding-prm' or 'holding-sec' are no longer true. The value 'holding-prm' must be set when the condition (notTR-Flag & not RE-Flag & (PC-LS=QLS | LEM-Fail TNE>NS-Max | (not LS-Flag & TPC > T-Out))) is satisfied in state PC8:ACTIVE for the A Port. The value 'holding-sec' must be set when the condition (notTR-Flag & not RE-Flag & (PC-LS=QLS | LEM-Fail TNE>NS-Max | (not LS-Flag & TPC > T-Out))) is satisfied in state PC8:ACTIVE for the B Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER not-implemented(1), not-holding(2), holding-prm(3), holding-sec(4)  

a3ComFddiSMTSetCount 1.3.6.1.4.1.43.29.10.1.1.1.5
This variable is composed of a count incremented in response to a Set operation on the MIB, and the time of the change, however only the count is reported here (refer to ANSI SMT 8.4.1).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

a3ComFddiSMTLastSetStationId 1.3.6.1.4.1.43.29.10.1.1.1.6
The Station ID of the station that effected the last change in the FDDI MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  FddiSMTStationIdType  

a3ComFddiMACBridgeFunctionTable 1.3.6.1.4.1.43.29.10.2.1
A list of MAC bridge function entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    A3ComFddiMACBridgeFunctionEntry

a3ComFddiMACBridgeFunctionEntry 1.3.6.1.4.1.43.29.10.2.1.1
Bridge function information for a given MAC within a given SMT.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  A3ComFddiMACBridgeFunctionEntry  

a3ComFddiMACBridgeFunctionSMTIndex 1.3.6.1.4.1.43.29.10.2.1.1.1
A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

a3ComFddiMACBridgeFunctionMACIndex 1.3.6.1.4.1.43.29.10.2.1.1.2
Index variable for uniquely identifying the MAC object instances.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

a3ComFddiMACBridgeFunctions 1.3.6.1.4.1.43.29.10.2.1.1.3
Indicates the MAC's optional bridging functions. The Value -1 is used to indicate that bridging is not supported by this MAC. The value is a sum. This value initially takes the value zero, then for each function present, 2 raised to a power is added to the sum. The powers are according to the following table: Function Power tb 0 -- Transparent bridging active sr 1 -- Src routing active srt 2 -- Src routing transparent active
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -1..7  

a3ComFddiMACTPriTable 1.3.6.1.4.1.43.29.10.2.2
A list of MAC T-Pri entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    A3ComFddiMACTPriEntry

a3ComFddiMACTPriEntry 1.3.6.1.4.1.43.29.10.2.2.1
A collection of T-Pri information for a given MAC within a given SMT.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  A3ComFddiMACTPriEntry  

a3ComFddiMACTPriSMTIndex 1.3.6.1.4.1.43.29.10.2.2.1.1
A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

a3ComFddiMACTPriMACIndex 1.3.6.1.4.1.43.29.10.2.2.1.2
Index variable for uniquely identifying the MAC object instances.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

a3ComFddiMACTPri0 1.3.6.1.4.1.43.29.10.2.2.1.3
This attribute is an unsigned twos-complement T-pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units.
Status: mandatory Access: read-only
OBJECT-TYPE    
  FddiTimeNano  

a3ComFddiMACTPri1 1.3.6.1.4.1.43.29.10.2.2.1.4
This attribute is an unsigned twos-complement T-pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units.
Status: mandatory Access: read-only
OBJECT-TYPE    
  FddiTimeNano  

a3ComFddiMACTPri2 1.3.6.1.4.1.43.29.10.2.2.1.5
This attribute is an unsigned twos-complement T-pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units.
Status: mandatory Access: read-only
OBJECT-TYPE    
  FddiTimeNano  

a3ComFddiMACTPri3 1.3.6.1.4.1.43.29.10.2.2.1.6
This attribute is an unsigned twos-complement T-pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units.
Status: mandatory Access: read-only
OBJECT-TYPE    
  FddiTimeNano  

a3ComFddiMACTPri4 1.3.6.1.4.1.43.29.10.2.2.1.7
This attribute is an unsigned twos-complement T-pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units.
Status: mandatory Access: read-only
OBJECT-TYPE    
  FddiTimeNano  

a3ComFddiMACTPri5 1.3.6.1.4.1.43.29.10.2.2.1.8
This attribute is an unsigned twos-complement T-pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units.
Status: mandatory Access: read-only
OBJECT-TYPE    
  FddiTimeNano  

a3ComFddiMACTPri6 1.3.6.1.4.1.43.29.10.2.2.1.9
This attribute is an unsigned twos-complement T-pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units.
Status: mandatory Access: read-only
OBJECT-TYPE    
  FddiTimeNano  

a3ComFddiPATHRingTable 1.3.6.1.4.1.43.29.10.3.1
A list of PATH ring entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    A3ComFddiPATHRingEntry

a3ComFddiPATHRingEntry 1.3.6.1.4.1.43.29.10.3.1.1
Ring latency, trace status, and T-Rmode information for a given PATH within a given SMT.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  A3ComFddiPATHRingEntry  

a3ComFddiPATHRingSMTIndex 1.3.6.1.4.1.43.29.10.3.1.1.1
A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

a3ComFddiPATHRingPATHIndex 1.3.6.1.4.1.43.29.10.3.1.1.2
Index variable for uniquely identifying the primary, secondary and local PATH object instances. Local PATH object instances are represented with integer values 3 to 255.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

a3ComFddiPATHRingLatency 1.3.6.1.4.1.43.29.10.3.1.1.3
Gives the total accumulated latency of the ring associated with this path. May be measured directly by the station or calculated by a management station. Values of this object are reported in 1 ns units.
Status: mandatory Access: read-write
OBJECT-TYPE    
  FddiTimeNano  

a3ComFddiPATHTraceStatus 1.3.6.1.4.1.43.29.10.3.1.1.4
This attribute indicates the current trace status of the path. The value is a sum which represents all of the trace status information which applies. This value initially takes the value zero, then for each condition which applies, 2 raised to a power is added to the sum. the powers are according to the following table: TraceStatus Power traceinitiated 0 tracepropragated 1 traceterminated 2 tracetimeout 3
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

a3ComFddiPATHT-Rmode 1.3.6.1.4.1.43.29.10.3.1.1.5
Used by RMT to limit the duration of restricted dialogs on a path. This object is reported in 1 ns units.
Status: mandatory Access: read-write
OBJECT-TYPE    
  FddiTimeNano  

a3ComFddiPATHSbaTable 1.3.6.1.4.1.43.29.10.3.2
A list of PATH Sba entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    A3ComFddiPATHSbaEntry

a3ComFddiPATHSbaEntry 1.3.6.1.4.1.43.29.10.3.2.1
Sba information for a given PATH within a given SMT.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  A3ComFddiPATHSbaEntry  

a3ComFddiPATHSbaSMTIndex 1.3.6.1.4.1.43.29.10.3.2.1.1
A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

a3ComFddiPATHSbaPATHIndex 1.3.6.1.4.1.43.29.10.3.2.1.2
Index variable for uniquely identifying the primary, secondary and local PATH object instances. Local PATH object instances are represented with integer values 3 to 255.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

a3ComFddiPATHSbaPayload 1.3.6.1.4.1.43.29.10.3.2.1.3
The payload portion of the Synchronous Bandwidth Allocation for thi path. This value represents the maximum number of bytes of data allocated for transmission per 125 microseconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1562  

a3ComFddiPATHSbaOverhead 1.3.6.1.4.1.43.29.10.3.2.1.4
The overhead portion of the Synchronous Bandwith Allocation for this path. This value repersents the maximum number of bytes overhead (token capture, frame header, etc.) used pre negotiated Target Token Rotation Time (T-neg).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

a3ComFddiPATHSbaAvailable 1.3.6.1.4.1.43.29.10.3.2.1.5
This value is the maximum Synchronous Bandwith available for a path in bytes per second.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..12500000  

a3ComFddiPORTTable 1.3.6.1.4.1.43.29.10.4.1
A list of optional PORT entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    A3ComFddiPORTEntry

a3ComFddiPORTEntry 1.3.6.1.4.1.43.29.10.4.1.1
MAC loop time and EB error count information for a given PORT within a given SMT.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  A3ComFddiPORTEntry  

a3ComFddiPORTSMTIndex 1.3.6.1.4.1.43.29.10.4.1.1.1
A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

a3ComFddiPORTIndex 1.3.6.1.4.1.43.29.10.4.1.1.2
Index variable for uniquely identifying the PORT object instances.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

a3ComFddiPORTMACLoopTime 1.3.6.1.4.1.43.29.10.4.1.1.3
This attribute controls the value used for T-Next(9) (see 9.4.4.2.3). This object is reported in 1 ns units.
Status: mandatory Access: read-write
OBJECT-TYPE    
  FddiTimeNano  

a3ComFddiPORTEBErrorCt 1.3.6.1.4.1.43.29.10.4.1.1.4
A count that should as closely as possible match the times an Elasticity Buffer Error has occurred while in active line state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

a3ComFddiPORTLSTable 1.3.6.1.4.1.43.29.10.4.2
A list of optional PORT line state entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    A3ComFddiPORTLSEntry

a3ComFddiPORTLSEntry 1.3.6.1.4.1.43.29.10.4.2.1
Maintenance line state and PC line state information for a given PORT within a given SMT.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  A3ComFddiPORTLSEntry  

a3ComFddiPORTLSSMTIndex 1.3.6.1.4.1.43.29.10.4.2.1.1
A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

a3ComFddiPORTLSPORTIndex 1.3.6.1.4.1.43.29.10.4.2.1.2
Index variable for uniquely identifying the PORT object instances.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

a3ComFddiPORTMaintLS 1.3.6.1.4.1.43.29.10.4.2.1.3
The PORT Maintenance Line State specifies the line state (Maint-LS) to be transmitted when the PCM state machine for the port is in state PC9 Maint.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER quiet(1), idle(2), master(3), halt(4), receive-active(5), receive-unknown(6), receive-noise(7)  

a3ComFddiPORTPCLS 1.3.6.1.4.1.43.29.10.4.2.1.4
This attribute indicates the line state (PC-LS) received by the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER quiet(1), idle(2), master(3), halt(4), receive-active(5), receive-unknown(6), receive-noise(7)  

a3ComFddiSMTHoldCondition 1
Generated when fddiSMTHoldState (fddimibSMTHoldState) assumes the state holding-prm or holding-sec. This notification is a Condition in the Status Report Protocol (see 7.2.7 and 8.3).
TRAP-TYPE    

a3ComFddiSMTPeerWrapCondition 2
This condition is active when fddiSMTPeerWrapFlag (fddimibSMTPeerWrapFlag) is set. This notification is a Condition in the Status Report Protocol (see 7.2.7 and 8.3).
TRAP-TYPE    

a3ComFddiMACDuplicateAddressCondition 3
This condition is active when either fddiMACDA-Flag (fddimibMACDaFlag) or fddiMACUNDA-Flag (fddimibMACUnaDaFlag) is set. This event is handled as a Condition in the Status Report Protocol (see 7.2.7 and 8.3).
TRAP-TYPE    

a3ComFddiMACFrameErrorCondition 4
Generated when the fddiMACFrameErrorRatio (fddimibMACFrameErrorRatio) is greater than or equal to fddiMACFrameErrorThreshold (fddimibMACFrameErrorThreshold). This event is handled as a Condition in the Status Report Protocol (see 7.2.7 and 8.3).
TRAP-TYPE    

a3ComFddiMACNotCopiedCondition 5
Generated when the fddiMACNotCopiedRatio (fddimibMACNotCopiedRatio) is greater than or equal to the fddiMACNotCopiedThreshold (a3ComFddiMACNotCopiedThreshold). This event is handled as a Condition in the Status Report Protocol (see 7.2.7 and 8.3).
TRAP-TYPE    

a3ComFddiMACNeighborChangeEvent 6
Generated when a change in a MAC's upstream neighbor address or downstream neighbor address is detected. (see 7.2.7 and 8.3).
TRAP-TYPE    

a3ComFddiMACPathChangeEvent 7
This event is generated when the value of the fddiMACCurrentPath (fddimibMACCurrentPath) changes. This event shall be supressed if the value changes from isolated to local or local to isolated (see 7.2.7 and 8.3).
TRAP-TYPE    

a3ComFddiPORTLerCondition 8
This condition becomes active when the value of fddiPORTLer-Estimate (fddimibPORTLerEstimate) is less than or equal to fddiPORTLer-Alarm (fddimibPORTLerAlarm). This will be reported with the Status Report Frames (SRF) (see 7.2.7 and 8.3).
TRAP-TYPE    

a3ComFddiPORTUndesiredConnAttemptEvent 9
Generated when an undesired connection attempt has been made (see 5.2.4, 7.2.7, and 8.3).
TRAP-TYPE    

a3ComFddiPORTEBErrorCondition 10
Generated when the Elasticity Buffer Error-Ct (a3ComFddiPORTEBErrorCt) increments. This is handled as a condition in the Status Report Protocol. It is generated when an increment occurs in the station's sampling period (see 7.2.7 and 8.3).
TRAP-TYPE    

a3ComFddiPORTPathChangeEvent 11
This event is generated when the value of the fddiPORTCurrentPath (a3ComFddiPORTCurrentPath) changes. This event shall be surpressed if the value changes from isolated to local or local to isolated (see 7.2.7 and 8.3).
TRAP-TYPE