A3COM-HUAWEI-USERLOG-MIB

File: A3COM-HUAWEI-USERLOG-MIB.mib (28997 bytes)

Imported modules

A3COM-HUAWEI-OID-MIB SNMPv2-CONF SNMPv2-SMI

Imported symbols

huawei huaweiMgmt huaweiDatacomm
OBJECT-GROUP MODULE-COMPLIANCE IpAddress
Integer32 Counter32 OBJECT-TYPE
MODULE-IDENTITY

Defined Types

HwUserlogNatSlotCfgInfoEntry  
SEQUENCE    
  hwUserlogNatCfgSlotNumber Integer32
  hwUserlogNatEnable Integer32
  hwUserlogNatAclNumber Integer32
  hwUserlogNatHostAddress IpAddress
  hwUserlogNatUdpPort Integer32

HwUserlogNatSlotRunInfoEntry  
SEQUENCE    
  hwUserlogNatRunSlotNumber Integer32
  hwUserlogNatTotalEntries Counter32
  hwUserlogNatTotalPackets Counter32
  hwUserlogNatFailedEntries Counter32
  hwUserlogNatFailedPackets Counter32
  hwUserlogNatClearRunStat Integer32

HwUserlogFlowSlotCfgInfoEntry  
SEQUENCE    
  hwUserlogFlowCfgSlotNumber Integer32
  hwUserlogFlowEnable Integer32
  hwUserlogFlowAclNumber Integer32
  hwUserlogFlowHostAddress IpAddress
  hwUserlogFlowUdpPort Integer32

HwUserlogFlowSlotRunInfoEntry  
SEQUENCE    
  hwUserlogFlowRunSlotNumber Integer32
  hwUserlogFlowTotalEntries Counter32
  hwUserlogFlowTotalPackets Counter32
  hwUserlogFlowFailedEntries Counter32
  hwUserlogFlowFailedPackets Counter32
  hwUserlogFlowClearRunStat Integer32

HwUserlogAccessSlotCfgInfoEntry  
SEQUENCE    
  hwUserlogAccessCfgSlotNumber Integer32
  hwUserlogAccessEnable Integer32
  hwUserlogAccessHostAddress IpAddress
  hwUserlogAccessUdpPort Integer32

HwUserlogAccessSlotRunInfoEntry  
SEQUENCE    
  hwUserlogAccessRunSlotNumber Integer32
  hwUserlogAccessTotalEntries Counter32
  hwUserlogAccessTotalPackets Counter32
  hwUserlogAccessFailedEntries Counter32
  hwUserlogAccessFailedPackets Counter32
  hwUserlogAccessClearRunStat Integer32

Defined Values

hwUserLogMIB 1.3.6.1.4.1.43.45.1.5.25.18
The A3COM-HUAWEI-USERLOG-MIB contains objects to Manage configuration and Monitor running state for userlog feature.
MODULE-IDENTITY    

hwUserlogObjects 1.3.6.1.4.1.43.45.1.5.25.18.1
OBJECT IDENTIFIER    

hwUserlogNatObjects 1.3.6.1.4.1.43.45.1.5.25.18.1.1
OBJECT IDENTIFIER    

hwUserlogNatVersion 1.3.6.1.4.1.43.45.1.5.25.18.1.1.1
NAT LOG version. Currently only version 1 is developed.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwUserlogNatSyslog 1.3.6.1.4.1.43.45.1.5.25.18.1.1.2
NAT LOG format. If 1, LOG format is sysLog. If 0, LOG format is UDP packet. UDP packet is the default format, and is recommended.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwUserlogNatSourceIP 1.3.6.1.4.1.43.45.1.5.25.18.1.1.3
The Source IP address of NAT LOG UDP packet.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwUserlogNatFlowBegin 1.3.6.1.4.1.43.45.1.5.25.18.1.1.4
Log the NAT flow when it is created. If 1, this function is enabled. If 0, this function is disabled. This function will be used when real-time monitor required.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwUserlogNatActiveTime 1.3.6.1.4.1.43.45.1.5.25.18.1.1.5
The active time for long-time existed NAT flow. Unit: minute. Range: 10 minutes ~ 120 minutes. When setting it, NAT flow can be logged after an interval of active time. This function will be used when real-time monitor required. The default value 0 means real-time monitor function is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwUserlogNatSlotCfgInfoTable 1.3.6.1.4.1.43.45.1.5.25.18.1.1.6
A table of NAT LOG configuration information for the specified slot.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwUserlogNatSlotCfgInfoEntry

hwUserlogNatSlotCfgInfoEntry 1.3.6.1.4.1.43.45.1.5.25.18.1.1.6.1
NAT LOG Configuration Information Entry for a slot.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwUserlogNatSlotCfgInfoEntry  

hwUserlogNatCfgSlotNumber 1.3.6.1.4.1.43.45.1.5.25.18.1.1.6.1.1
Slot number. Specify which slot is configured with NAT LOG.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..15  

hwUserlogNatEnable 1.3.6.1.4.1.43.45.1.5.25.18.1.1.6.1.2
The NAT LOG feature Enable status. If 1, NAT LOG is enbled. If 0, NAT LOG is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwUserlogNatAclNumber 1.3.6.1.4.1.43.45.1.5.25.18.1.1.6.1.3
Access-list number. The value 0 means no ACL is specified. Only when NAT LOG is enabled, can ACL be configured. Only NAT flow which match the ACL will be logged.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwUserlogNatHostAddress 1.3.6.1.4.1.43.45.1.5.25.18.1.1.6.1.4
The IP address of NAT LOG server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwUserlogNatUdpPort 1.3.6.1.4.1.43.45.1.5.25.18.1.1.6.1.5
The UDP Port Number of NAT LOG UDP packet.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

hwUserlogNatSlotRunInfoTable 1.3.6.1.4.1.43.45.1.5.25.18.1.1.7
A table of NAT LOG running information for the specified slot.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwUserlogNatSlotRunInfoEntry

hwUserlogNatSlotRunInfoEntry 1.3.6.1.4.1.43.45.1.5.25.18.1.1.7.1
NAT LOG Running Information Entry for a slot.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwUserlogNatSlotRunInfoEntry  

hwUserlogNatRunSlotNumber 1.3.6.1.4.1.43.45.1.5.25.18.1.1.7.1.1
Slot number. Specify on which slot the NAT LOG statistics displayed.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..15  

hwUserlogNatTotalEntries 1.3.6.1.4.1.43.45.1.5.25.18.1.1.7.1.2
The total number of NAT flow entries which are logged.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwUserlogNatTotalPackets 1.3.6.1.4.1.43.45.1.5.25.18.1.1.7.1.3
The total number of NAT LOG UDP packets generated by the router.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwUserlogNatFailedEntries 1.3.6.1.4.1.43.45.1.5.25.18.1.1.7.1.4
The total number of NAT flow entries failed in outputting.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwUserlogNatFailedPackets 1.3.6.1.4.1.43.45.1.5.25.18.1.1.7.1.5
The total number of NAT LOG UDP packets failed in outputting.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwUserlogNatClearRunStat 1.3.6.1.4.1.43.45.1.5.25.18.1.1.7.1.6
Clear the running statistics for NAT LOG. Write-only. If 1, the running statistics for NAT LOG is resetted. Other value is invalid.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwUserlogFlowObjects 1.3.6.1.4.1.43.45.1.5.25.18.1.2
OBJECT IDENTIFIER    

hwUserlogFlowVersion 1.3.6.1.4.1.43.45.1.5.25.18.1.2.1
BAS FLOW LOG version. Currently only version 1 is developed.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwUserlogFlowSyslog 1.3.6.1.4.1.43.45.1.5.25.18.1.2.2
BAS FLOW LOG format. If 1, LOG format is sysLog. If 0, LOG format is UDP packet. UDP packet is the default format, and is recommended.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwUserlogFlowSourceIP 1.3.6.1.4.1.43.45.1.5.25.18.1.2.3
The Source IP address of BAS FLOW LOG UDP packet.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwUserlogFlowFlowBegin 1.3.6.1.4.1.43.45.1.5.25.18.1.2.4
Log the BAS flow when it is created. If 1, this function is enabled. If 0, this function is disabled. This function will be used when real-time monitor required.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwUserlogFlowActiveTime 1.3.6.1.4.1.43.45.1.5.25.18.1.2.5
The active time for long-time existed BAS flow. Unit: minute. Range: 10 minutes ~ 120 minutes. When setting it, BAS flow can be logged after an internal of active time. This function will be used when real-time monitor required. The default value 0 means real-time monitor function is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwUserlogFlowSlotCfgInfoTable 1.3.6.1.4.1.43.45.1.5.25.18.1.2.6
A table of BAS FLOW LOG configuration information for the specified slot.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwUserlogFlowSlotCfgInfoEntry

hwUserlogFlowSlotCfgInfoEntry 1.3.6.1.4.1.43.45.1.5.25.18.1.2.6.1
BAS FLOW LOG Configuration Information Entry for a slot.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwUserlogFlowSlotCfgInfoEntry  

hwUserlogFlowCfgSlotNumber 1.3.6.1.4.1.43.45.1.5.25.18.1.2.6.1.1
Slot number. Specify which slot is configured with BAS FLOW LOG.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..15  

hwUserlogFlowEnable 1.3.6.1.4.1.43.45.1.5.25.18.1.2.6.1.2
The BAS FLOW LOG feature Enable status. If 1, BAS FLOW LOG is enbled. If 0, BAS FLOW LOG is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwUserlogFlowAclNumber 1.3.6.1.4.1.43.45.1.5.25.18.1.2.6.1.3
Access-list number. The value 0 means no ACL is specified. Only when BAS FLOW LOG is enabled, can ACL be configured. Only BAS flow which match the ACL will be logged.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwUserlogFlowHostAddress 1.3.6.1.4.1.43.45.1.5.25.18.1.2.6.1.4
The IP address of BAS FLOW LOG server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwUserlogFlowUdpPort 1.3.6.1.4.1.43.45.1.5.25.18.1.2.6.1.5
The UDP Port Number of BAS FLOW LOG UDP packet.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

hwUserlogFlowSlotRunInfoTable 1.3.6.1.4.1.43.45.1.5.25.18.1.2.7
A table of BAS FLOW LOG running information for the specified slot.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwUserlogFlowSlotRunInfoEntry

hwUserlogFlowSlotRunInfoEntry 1.3.6.1.4.1.43.45.1.5.25.18.1.2.7.1
Running Information Entry for a slot.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwUserlogFlowSlotRunInfoEntry  

hwUserlogFlowRunSlotNumber 1.3.6.1.4.1.43.45.1.5.25.18.1.2.7.1.1
Slot number. Specify on which slot the BAS FLOW LOG statistics displayed.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..15  

hwUserlogFlowTotalEntries 1.3.6.1.4.1.43.45.1.5.25.18.1.2.7.1.2
The total number of BAS FLOW Entries which are logged.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwUserlogFlowTotalPackets 1.3.6.1.4.1.43.45.1.5.25.18.1.2.7.1.3
The total number of FLOW LOG UDP packet generated by the router.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwUserlogFlowFailedEntries 1.3.6.1.4.1.43.45.1.5.25.18.1.2.7.1.4
The total number of BAS FLOW entries failed in outputting.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwUserlogFlowFailedPackets 1.3.6.1.4.1.43.45.1.5.25.18.1.2.7.1.5
The total number of BAS FLOW LOG UDP packet failed in outputting.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwUserlogFlowClearRunStat 1.3.6.1.4.1.43.45.1.5.25.18.1.2.7.1.6
Clear the running statistics for FLOW LOG. Write-only. If 1, the running statistics for FLOW LOG is resetted. Other value is invalid.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwUserlogAccessObjects 1.3.6.1.4.1.43.45.1.5.25.18.1.3
OBJECT IDENTIFIER    

hwUserlogAccessVersion 1.3.6.1.4.1.43.45.1.5.25.18.1.3.1
BAS ACCESS LOG version. Currently only version 1 is developed.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwUserlogAccessSyslog 1.3.6.1.4.1.43.45.1.5.25.18.1.3.2
BAS ACCESS LOG format. If 1, LOG format is sysLog; If 0, LOG format is UDP packet. UDP packet is the default format, and is recommended.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwUserlogAccessSourceIP 1.3.6.1.4.1.43.45.1.5.25.18.1.3.3
The Source IP address of BAS ACCESS LOG UDP packet.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwUserlogAccessSlotCfgInfoTable 1.3.6.1.4.1.43.45.1.5.25.18.1.3.4
A table of BAS ACCESS LOG configuration information for the specified slot.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwUserlogAccessSlotCfgInfoEntry

hwUserlogAccessSlotCfgInfoEntry 1.3.6.1.4.1.43.45.1.5.25.18.1.3.4.1
BAS ACCESS LOG Configuration Information Entry for a slot.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwUserlogAccessSlotCfgInfoEntry  

hwUserlogAccessCfgSlotNumber 1.3.6.1.4.1.43.45.1.5.25.18.1.3.4.1.1
Slot number. Specify which slot is configured with BAS ACCESS LOG.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..15  

hwUserlogAccessEnable 1.3.6.1.4.1.43.45.1.5.25.18.1.3.4.1.2
The BAS ACCESS LOG feature Enable status. If 1, BAS ACCESS LOG is enbled. If 0, BAS ACCESS LOG is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwUserlogAccessHostAddress 1.3.6.1.4.1.43.45.1.5.25.18.1.3.4.1.3
The IP address of BAS ACCESS LOG server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwUserlogAccessUdpPort 1.3.6.1.4.1.43.45.1.5.25.18.1.3.4.1.4
The UDP Port Number of BAS ACCESS LOG UDP packet.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

hwUserlogAccessSlotRunInfoTable 1.3.6.1.4.1.43.45.1.5.25.18.1.3.5
A table of BAS ACCESS LOG running information for the specified slot.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwUserlogAccessSlotRunInfoEntry

hwUserlogAccessSlotRunInfoEntry 1.3.6.1.4.1.43.45.1.5.25.18.1.3.5.1
Running Information Entry for a slot.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwUserlogAccessSlotRunInfoEntry  

hwUserlogAccessRunSlotNumber 1.3.6.1.4.1.43.45.1.5.25.18.1.3.5.1.1
Slot number. Specify on which slot the BAS ACCESS LOG statistics displayed.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..15  

hwUserlogAccessTotalEntries 1.3.6.1.4.1.43.45.1.5.25.18.1.3.5.1.2
The total number of BAS ACCESS Records which are logged.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwUserlogAccessTotalPackets 1.3.6.1.4.1.43.45.1.5.25.18.1.3.5.1.3
The total number of ACCESS LOG UDP packet generated by the router.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwUserlogAccessFailedEntries 1.3.6.1.4.1.43.45.1.5.25.18.1.3.5.1.4
The total number of BAS ACCESS entries failed in outputting.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwUserlogAccessFailedPackets 1.3.6.1.4.1.43.45.1.5.25.18.1.3.5.1.5
The total number of BAS ACCESS LOG UDP packet failed in outputting.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwUserlogAccessClearRunStat 1.3.6.1.4.1.43.45.1.5.25.18.1.3.5.1.6
Clear the running statistics for ACCESS LOG. Write-only. If 1, the running statistics for ACCESS LOG is resetted. Other value is invalid.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwUserlogNotifications 1.3.6.1.4.1.43.45.1.5.25.18.2
OBJECT IDENTIFIER    

hwUserlogConformance 1.3.6.1.4.1.43.45.1.5.25.18.3
OBJECT IDENTIFIER    

hwUserlogCompliances 1.3.6.1.4.1.43.45.1.5.25.18.3.1
OBJECT IDENTIFIER    

hwUserlogCompliance 1.3.6.1.4.1.43.45.1.5.25.18.3.1.1
The compliance statement for entities which implement the Huawei Userlog mib.
Status: current Access: read-write
MODULE-COMPLIANCE    

hwUserlogGroups 1.3.6.1.4.1.43.45.1.5.25.18.3.2
OBJECT IDENTIFIER    

hwUserlogMandatoryGroup 1.3.6.1.4.1.43.45.1.5.25.18.3.2.1
A collection of objects providing mandatory Userlog information.
Status: current Access: read-write
OBJECT-GROUP    

hwUserlogConfigGroup 1.3.6.1.4.1.43.45.1.5.25.18.3.2.2
All configurable parameters of Userlog feature.
Status: current Access: read-write
OBJECT-GROUP    

hwUserlogInfoGroup 1.3.6.1.4.1.43.45.1.5.25.18.3.2.3
All running information of Userlog feature.
Status: current Access: read-write
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor