A3COM-HUAWEI-LswMSTP-MIB

File: A3COM-HUAWEI-LswMSTP-MIB.mib (29905 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC BRIDGE-MIB
A3COM-HUAWEI-OID-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Counter32
OBJECT-IDENTITY NOTIFICATION-TYPE TEXTUAL-CONVENTION
TruthValue dot1dStpPortEntry dot1dStpPort
lswCommon

Defined Types

EnabledStatus  
A simple status value for the object.
TEXTUAL-CONVENTION    
  INTEGER enabled(1), disabled(2)  

BridgeId  
OCTET STRING Size(8)    

Hwdot1sFormatStatus  
Legacy means that the BPDU format is legacy. Dot1s means that the BPDU format is IEEE 802.1s. Auto means that the format of BPDU sending on the port is determined by the BPDU format of its connective port.
TEXTUAL-CONVENTION    
  INTEGER legacy(1), dot1s(2), auto(3)  

Hwdot1sVIDAllocationEntry  
SEQUENCE    
  hwdot1sMstVID INTEGER
  hwdot1sAdminMstID INTEGER
  hwdot1sOperMstID INTEGER

Hwdot1sInstanceEntry  
SEQUENCE    
  hwdot1sInstanceID INTEGER
  hwdot1sMstiBridgeID BridgeId
  hwdot1sMstiBridgePriority INTEGER
  hwdot1sMstiDesignedRoot BridgeId
  hwdot1sMstiRootPathCost INTEGER
  hwdot1sMstiRootPort INTEGER
  hwdot1sMstiRootType INTEGER
  hwdot1sMstiRemainingHops INTEGER
  hwdot1sMstiAdminMappedVlanListLow OCTET STRING
  hwdot1sMstiAdminMappedVlanListHigh OCTET STRING
  hwdot1sMstiOperMappedVlanListLow OCTET STRING
  hwdot1sMstiOperMappedVlanListHigh OCTET STRING

Hwdot1sPortEntry  
SEQUENCE    
  hwdot1sMstiPortIndex INTEGER
  hwdot1sMstiState INTEGER
  hwdot1sMstiPortPriority INTEGER
  hwdot1sMstiPathCost INTEGER
  hwdot1sMstiDesignatedRoot BridgeId
  hwdot1sMstiDesignatedCost INTEGER
  hwdot1sMstiDesignatedBridge BridgeId
  hwdot1sMstiDesignatedPort OCTET STRING
  hwdot1sMstiMasterBridgeID BridgeId
  hwdot1sMstiMasterPortCost INTEGER
  hwdot1sMstiStpPortEdgeport EnabledStatus
  hwdot1sMstiStpPortPointToPoint INTEGER
  hwdot1sMstiStpMcheck INTEGER
  hwdot1sMstiStpTransLimit INTEGER
  hwdot1sMstiStpRXStpBPDU Counter32
  hwdot1sMstiStpTXStpBPDU Counter32
  hwdot1sMstiStpRXTCNBPDU Counter32
  hwdot1sMstiStpTXTCNBPDU Counter32
  hwdot1sMstiStpRXRSTPBPDU Counter32
  hwdot1sMstiStpTXRSTPBPDU Counter32
  hwdot1sMstiStpRXMSTPBPDU Counter32
  hwdot1sMstiStpTXMSTPBPDU Counter32
  hwdot1sMstiStpClearStatistics INTEGER
  hwdot1sMstiStpDefaultPortCost INTEGER
  hwdot1sMstiStpStatus EnabledStatus
  hwdot1sMstiPortRootGuard EnabledStatus
  hwdot1sMstiPortLoopGuard EnabledStatus
  hwdot1sMstiStpPortSendingBPDUType INTEGER
  hwdot1sMstiStpOperPortPointToPoint INTEGER
  hwdot1sMstiStpPortAdminBPDUFmt Hwdot1sFormatStatus
  hwdot1sMstiStpPortOperBPDUFmt Hwdot1sFormatStatus
  hwdot1sMstiStpPortRoleRestriction EnabledStatus
  hwdot1sMstiStpPortTcRestriction EnabledStatus
  hwdot1sMstiStpPortDisputed TruthValue

Defined Values

hwdot1sMstp 1.3.6.1.4.1.43.45.1.2.23.1.14
Tok_String
MODULE-IDENTITY    

hwdot1sStpStatus 1.3.6.1.4.1.43.45.1.2.23.1.14.1
Whether the Bridge MSTP is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

hwdot1sStpForceVersion 1.3.6.1.4.1.43.45.1.2.23.1.14.2
The mode of this Bridge spanning-tree protocol.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER stp(0), rstp(2), mstp(3)  

hwdot1sStpDiameter 1.3.6.1.4.1.43.45.1.2.23.1.14.3
The diameter of Bridge.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 2..7  

hwdot1sMstBridgeMaxHops 1.3.6.1.4.1.43.45.1.2.23.1.14.4
The maximum value of the Bridge hops.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..40  

hwdot1sMstMasterBridgeID 1.3.6.1.4.1.43.45.1.2.23.1.14.5
The Bridge Identifier of the current Master Bridge.
Status: current Access: read-only
OBJECT-TYPE    
  BridgeId  

hwdot1sMstMasterPathCost 1.3.6.1.4.1.43.45.1.2.23.1.14.6
The CIST path cost from the transmitting Bridge to the Master Bridge.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hwdot1sMstBpduGuard 1.3.6.1.4.1.43.45.1.2.23.1.14.7
Whether the Bridge BPDU Guard function is enabled. If the function is enabled, the port will shutdown when received BPDU and the port is configured as portfast.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

hwdot1sMstAdminFormatSelector 1.3.6.1.4.1.43.45.1.2.23.1.14.8
The administrative Configuration Identifier Format Selector in use by the Bridge. This has a value of 0 indicate the format specified in the Standard of IEEE 802.1s.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

hwdot1sMstAdminRegionName 1.3.6.1.4.1.43.45.1.2.23.1.14.9
This MSTP administrative region name.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

hwdot1sMstAdminRevisionLevel 1.3.6.1.4.1.43.45.1.2.23.1.14.10
This MSTP administrative revision level.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

hwdot1sMstOperFormatSelector 1.3.6.1.4.1.43.45.1.2.23.1.14.11
The operative Configuration Identifier Format Selector in use by the Bridge. This has a value of 0 indicate the format specified in the Standard of IEEE 802.1s.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hwdot1sMstOperRegionName 1.3.6.1.4.1.43.45.1.2.23.1.14.12
This MSTP operative region name.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hwdot1sMstOperRevisionLevel 1.3.6.1.4.1.43.45.1.2.23.1.14.13
This MSTP operative revision level.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

hwdot1sMstOperConfigDigest 1.3.6.1.4.1.43.45.1.2.23.1.14.14
This MSTP Region's Configuration Digest Signature Key.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

hwdot1sMstRegionConfActive 1.3.6.1.4.1.43.45.1.2.23.1.14.15
Active the region configuration.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwdot1sMstDefaultVlanAllo 1.3.6.1.4.1.43.45.1.2.23.1.14.16
Set default configuration about VLAN allocation and all VLANs are mapped to CIST.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), unused(65535)  

hwdot1sMstDefaultRegionName 1.3.6.1.4.1.43.45.1.2.23.1.14.17
Set default region name.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), unused(65535)  

hwdot1sVIDAllocationTable 1.3.6.1.4.1.43.45.1.2.23.1.14.18
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hwdot1sVIDAllocationEntry

hwdot1sVIDAllocationEntry 1.3.6.1.4.1.43.45.1.2.23.1.14.18.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  Hwdot1sVIDAllocationEntry  

hwdot1sMstVID 1.3.6.1.4.1.43.45.1.2.23.1.14.18.1.1
VLAN Identifier
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4094  

hwdot1sAdminMstID 1.3.6.1.4.1.43.45.1.2.23.1.14.18.1.2
Administrative Multiple spanning-tree instance Identifier.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..4094  

hwdot1sOperMstID 1.3.6.1.4.1.43.45.1.2.23.1.14.18.1.3
Operative Multiple spanning-tree instance Identifier.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..4094  

hwdot1sInstanceTable 1.3.6.1.4.1.43.45.1.2.23.1.14.19
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hwdot1sInstanceEntry

hwdot1sInstanceEntry 1.3.6.1.4.1.43.45.1.2.23.1.14.19.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  Hwdot1sInstanceEntry  

hwdot1sInstanceID 1.3.6.1.4.1.43.45.1.2.23.1.14.19.1.1
Multiple spanning-tree instance Identifier
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..4094  

hwdot1sMstiBridgeID 1.3.6.1.4.1.43.45.1.2.23.1.14.19.1.2
The Bridge Identifier for the spanning tree instance identified by MSTID
Status: current Access: read-only
OBJECT-TYPE    
  BridgeId  

hwdot1sMstiBridgePriority 1.3.6.1.4.1.43.45.1.2.23.1.14.19.1.3
The Bridge Priority for the spanning tree instance identified by MSTID. Step of 4096
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..61440  

hwdot1sMstiDesignedRoot 1.3.6.1.4.1.43.45.1.2.23.1.14.19.1.4
The Bridge Identifier of the Root Bridge for the spanning tree instance identified by MSTID
Status: current Access: read-only
OBJECT-TYPE    
  BridgeId  

hwdot1sMstiRootPathCost 1.3.6.1.4.1.43.45.1.2.23.1.14.19.1.5
The path cost from the transmitting Bridge to the Root Bridge for the spanning tree instance identified by MSTID
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hwdot1sMstiRootPort 1.3.6.1.4.1.43.45.1.2.23.1.14.19.1.6
The Root Port for the spanning tree instance identified by the MSTID
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hwdot1sMstiRootType 1.3.6.1.4.1.43.45.1.2.23.1.14.19.1.7
Config this Bridge as a primary root or secondary root and or cancel the root for this spanning tree instance identified by MSTID
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(0), secondary(1), primary(2)  

hwdot1sMstiRemainingHops 1.3.6.1.4.1.43.45.1.2.23.1.14.19.1.8
The remaining hops of the spanning tree instance identified by MSTID
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hwdot1sMstiAdminMappedVlanListLow 1.3.6.1.4.1.43.45.1.2.23.1.14.19.1.9
The lower part of administrative Vlan list mapped to the spanning tree instance identified by MSTID
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

hwdot1sMstiAdminMappedVlanListHigh 1.3.6.1.4.1.43.45.1.2.23.1.14.19.1.10
The higher part of administrative Vlan list mapped to the spanning tree instance identified by MSTID
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

hwdot1sMstiOperMappedVlanListLow 1.3.6.1.4.1.43.45.1.2.23.1.14.19.1.11
The lower part of operative Vlan list mapped to the spanning tree instance identified by MSTID
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

hwdot1sMstiOperMappedVlanListHigh 1.3.6.1.4.1.43.45.1.2.23.1.14.19.1.12
The higher part of operative Vlan list mapped to the spanning tree instance identified by MSTID
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

hwdot1sPortTable 1.3.6.1.4.1.43.45.1.2.23.1.14.20
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hwdot1sPortEntry

hwdot1sPortEntry 1.3.6.1.4.1.43.45.1.2.23.1.14.20.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  Hwdot1sPortEntry  

hwdot1sMstiPortIndex 1.3.6.1.4.1.43.45.1.2.23.1.14.20.1.1
The index of the Bridge Port
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hwdot1sMstiState 1.3.6.1.4.1.43.45.1.2.23.1.14.20.1.2
The current state of the Port (i.e., Disabled, Discarding , Learning, Forwarding)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), discarding(2), learning(4), forwarding(5)  

hwdot1sMstiPortPriority 1.3.6.1.4.1.43.45.1.2.23.1.14.20.1.3
The value of the priority field which is contained in the first (in network byte order) four bits of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of mstiPortIndex. And step of 16
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..240  

hwdot1sMstiPathCost 1.3.6.1.4.1.43.45.1.2.23.1.14.20.1.4
The contribution of this port to the path cost of paths towards the spanning tree root which include this port. The range of path cost is 1..65535 for 802.1d standard, is 1..200000000 for 802.1t standard, and is 1..200000 for the legacy standard.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..200000000  

hwdot1sMstiDesignatedRoot 1.3.6.1.4.1.43.45.1.2.23.1.14.20.1.5
The Bridge Identifier of the Root Bridge for the port of the Spanning Tree instance identified by the MSTID
Status: current Access: read-only
OBJECT-TYPE    
  BridgeId  

hwdot1sMstiDesignatedCost 1.3.6.1.4.1.43.45.1.2.23.1.14.20.1.6
The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hwdot1sMstiDesignatedBridge 1.3.6.1.4.1.43.45.1.2.23.1.14.20.1.7
The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
Status: current Access: read-only
OBJECT-TYPE    
  BridgeId  

hwdot1sMstiDesignatedPort 1.3.6.1.4.1.43.45.1.2.23.1.14.20.1.8
The Port Identifier of the port on the Designated Bridge for this port's segment.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

hwdot1sMstiMasterBridgeID 1.3.6.1.4.1.43.45.1.2.23.1.14.20.1.9
The Bridge Idnetifier of the current Master Bridge. Effective in CIST.
Status: current Access: read-only
OBJECT-TYPE    
  BridgeId  

hwdot1sMstiMasterPortCost 1.3.6.1.4.1.43.45.1.2.23.1.14.20.1.10
The CIST path cost from the transmitting Bridge to the Master Bridge. Effective in CIST.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hwdot1sMstiStpPortEdgeport 1.3.6.1.4.1.43.45.1.2.23.1.14.20.1.11
Whether the port fast is enabled. Effective in CIST.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

hwdot1sMstiStpPortPointToPoint 1.3.6.1.4.1.43.45.1.2.23.1.14.20.1.12
Whether the port connects the point to point link. Effective in CIST.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER forceTrue(1), forceFalse(2), auto(3)  

hwdot1sMstiStpMcheck 1.3.6.1.4.1.43.45.1.2.23.1.14.20.1.13
Forcing the state machine to send MST BPDUs in this manner can be used to test whether all legacy Bridges on a given LAN have been removed. Effective in CIST.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), unused(65535)  

hwdot1sMstiStpTransLimit 1.3.6.1.4.1.43.45.1.2.23.1.14.20.1.14
The value used by the Port Transmit state machine to limit the maximum transmission rate. Effective in CIST.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

hwdot1sMstiStpRXStpBPDU 1.3.6.1.4.1.43.45.1.2.23.1.14.20.1.15
The number of received Config BPDU. Effective in CIST.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwdot1sMstiStpTXStpBPDU 1.3.6.1.4.1.43.45.1.2.23.1.14.20.1.16
The number of transmitted Config BPDU. Effective in CIST.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwdot1sMstiStpRXTCNBPDU 1.3.6.1.4.1.43.45.1.2.23.1.14.20.1.17
The number of received TCN BPDU. Effective in CIST.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwdot1sMstiStpTXTCNBPDU 1.3.6.1.4.1.43.45.1.2.23.1.14.20.1.18
The number of transimitted TCN BPDU. Effective in CIST.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwdot1sMstiStpRXRSTPBPDU 1.3.6.1.4.1.43.45.1.2.23.1.14.20.1.19
The number of received RST BPDU. Effective in CIST.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwdot1sMstiStpTXRSTPBPDU 1.3.6.1.4.1.43.45.1.2.23.1.14.20.1.20
The number of transimitted RST BPDU. Effective in CIST.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwdot1sMstiStpRXMSTPBPDU 1.3.6.1.4.1.43.45.1.2.23.1.14.20.1.21
The number of received MST BPDU. Effective in CIST.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwdot1sMstiStpTXMSTPBPDU 1.3.6.1.4.1.43.45.1.2.23.1.14.20.1.22
The number of transimitted MST BPDU. Effective in CIST.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwdot1sMstiStpClearStatistics 1.3.6.1.4.1.43.45.1.2.23.1.14.20.1.23
Clear the spanning tree statistic. Effective in CIST.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(1), unused(65535)  

hwdot1sMstiStpDefaultPortCost 1.3.6.1.4.1.43.45.1.2.23.1.14.20.1.24
Set default Port path cost.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), unused(65535)  

hwdot1sMstiStpStatus 1.3.6.1.4.1.43.45.1.2.23.1.14.20.1.25
Whether the spanning tree protocol is enabled on this port. Effective in CIST.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

hwdot1sMstiPortRootGuard 1.3.6.1.4.1.43.45.1.2.23.1.14.20.1.26
Whether the root guard is enabled. Effective in CIST.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

hwdot1sMstiPortLoopGuard 1.3.6.1.4.1.43.45.1.2.23.1.14.20.1.27
Whether the loop protection is enabled. Effective in CIST.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

hwdot1sMstiStpPortSendingBPDUType 1.3.6.1.4.1.43.45.1.2.23.1.14.20.1.28
Type of BPDU which the port is sending.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER stp(1), rstp(2), mstp(3)  

hwdot1sMstiStpOperPortPointToPoint 1.3.6.1.4.1.43.45.1.2.23.1.14.20.1.29
This object indicates whether the port has connected to a point-to-point link or not. The value of the node is an operative value. The administrative value can be read from the node hwdot1sMstiStpPortPointToPoint. If the value of hwdot1sMstiStpPortPointToPoint is auto, the value of this node should be calculated by the network topology of this port. If the value of hwdot1sMstiStpPortPointToPoint is forceFalse, the value of this node is false. If the value of hwdot1sMstiStpPortPointToPoint is forceTrue, the value of this node is true.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

hwdot1sMstiStpPortAdminBPDUFmt 1.3.6.1.4.1.43.45.1.2.23.1.14.20.1.30
The value of the node is an administrative value. Value legacy means that the MST BPDU format is forced to legacy. Value dot1s means that the MST BPDU format is forced to IEEE 802.1s. Value auto means that the format of MST BPDU sending on the port is determined by the MST BPDU that the port has received. Effective in CIST.
Status: current Access: read-write
OBJECT-TYPE    
  Hwdot1sFormatStatus  

hwdot1sMstiStpPortOperBPDUFmt 1.3.6.1.4.1.43.45.1.2.23.1.14.20.1.31
The format of MST BPDU which the port is sending. Value legacy means that the format of MST BPDU sending on the port is legacy. Value dot1s means that the format of MST BPDU sending on the port is IEEE 802.1s. Effective in CIST.
Status: current Access: read-only
OBJECT-TYPE    
  Hwdot1sFormatStatus  

hwdot1sMstiStpPortRoleRestriction 1.3.6.1.4.1.43.45.1.2.23.1.14.20.1.32
Whether the role-restriction is enabled. Effective in CIST. The role-restriction causes the port not to be selected as root port for the CIST or any MSTI.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

hwdot1sMstiStpPortTcRestriction 1.3.6.1.4.1.43.45.1.2.23.1.14.20.1.33
Whether the tc-restriction is enabled. Effective in CIST. The tc-restriction causes the port not to propagate topology changes to other ports.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

hwdot1sMstiStpPortDisputed 1.3.6.1.4.1.43.45.1.2.23.1.14.20.1.34
Whether the port is disputed for the CIST or MSTI.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

hwdot1sStpPathCostStandard 1.3.6.1.4.1.43.45.1.2.23.1.14.21
Path cost standard of the bridge. Value dot1d-1998 is IEEE 802.1d standard in 1998, value dot1t is IEEE 802.1t standard, and value legacy is a private legacy standard.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER legacy(0), dot1d-1998(1), dot1t(2)  

hwMstpEventsV2 1.3.6.1.4.1.43.45.1.2.23.1.14.0
Definition point for Mstp notifications.
Status: current Access: read-write
OBJECT-IDENTITY    

hwPortMstiStateForwarding 1.3.6.1.4.1.43.45.1.2.23.1.14.0.1
The SNMP trap that is generated when a port turns into forwarding state form other state.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwPortMstiStateDiscarding 1.3.6.1.4.1.43.45.1.2.23.1.14.0.2
The SNMP trap that is generated when a port turns into discarding state form forwarding state.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwBridgeLostRootPrimary 1.3.6.1.4.1.43.45.1.2.23.1.14.0.3
The SNMP trap that is generated when the bridge is no longer the root bridge of the instance. Another switch with higher priority has already been the root bridge of the instance.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwPortMstiRootGuarded 1.3.6.1.4.1.43.45.1.2.23.1.14.0.4
The SNMP trap that is generated when a root-guard port receives a superior message on the relevant instance.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwPortMstiBpduGuarded 1.3.6.1.4.1.43.45.1.2.23.1.14.0.5
The SNMP trap that is generated when an edged port of the BPDU-guard switch receives BPDU packets.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwPortMstiLoopGuarded 1.3.6.1.4.1.43.45.1.2.23.1.14.0.6
The SNMP trap that is generated when an Alternate-Port or Root-Port is aged out.
Status: current Access: read-write
NOTIFICATION-TYPE