A3COM-HUAWEI-HGMP-MIB

File: A3COM-HUAWEI-HGMP-MIB.mib (58384 bytes)

Imported modules

A3COM-HUAWEI-OID-MIB SNMPv2-SMI SNMPv2-TC

Imported symbols

huaweiUtility IpAddress Integer32
OBJECT-TYPE MODULE-IDENTITY OBJECT-IDENTITY
NOTIFICATION-TYPE Counter32 Unsigned32
RowStatus MacAddress TEXTUAL-CONVENTION
DisplayString

Defined Types

HgmpGrpMemberEntry  
SEQUENCE    
  hgmpGrpMemberDeviceId OCTET STRING
  hgmpGrpMemberSerial Integer32
  hgmpGrpMemberIpAddr IpAddress
  hgmpGrpMemberName OCTET STRING
  hgmpGrpMemberPassword OCTET STRING
  hgmpGrpMemberPlatform OCTET STRING
  hgmpGrpMemberStatus INTEGER
  hgmpGrpMemberDisconCount Integer32
  hgmpGrpMemberEnrollTime Integer32
  hgmpGrpMemberOperate RowStatus

HgmpMemberResetEntry  
SEQUENCE    
  hgmpMemberResetMAC OCTET STRING
  hgmpMemberEraseflash INTEGER

HgmpWhitelistEntry  
SEQUENCE    
  hgmpWhitelistDeviceId OCTET STRING
  hgmpWhitelistSerial Integer32
  hgmpWhitelistRowStatus RowStatus

HgmpWhitelistNbEntry  
SEQUENCE    
  hgmpWhitelistNbIndex Integer32
  hgmpWhitelistNbDeviceId OCTET STRING
  hgmpWhitelistPortName OCTET STRING
  hgmpWhitelistNbPortName OCTET STRING

HgmpBlacklistEntry  
SEQUENCE    
  hgmpBlacklistDeviceId OCTET STRING
  hgmpBlacklistAccessDeviceId OCTET STRING
  hgmpBlacklistAccessPortName OCTET STRING
  hgmpBlacklistRowStatus RowStatus

HgmpMemberPriPortEntry  
SEQUENCE    
  hgmpMemberDevId OCTET STRING
  hgmpMemberPriPortProto Unsigned32
  hgmpMemberPriPortProtoDescr DisplayString
  hgmpMemberPriPortNum Unsigned32

HgmpStackMemberEntry  
SEQUENCE    
  hgmpStackMemberDeviceId OCTET STRING
  hgmpStackMemberSerial Integer32
  hgmpStackMemberIpAddr IpAddress
  hgmpStackMemberName OCTET STRING
  hgmpStackMemberPassword OCTET STRING
  hgmpStackMemberPlatform OCTET STRING
  hgmpStackMemberStatus INTEGER
  hgmpStackMemberDisconCount Integer32
  hgmpStackMemberEnrollTime Integer32

HwNDPPortEntry  
SEQUENCE    
  hwNDPIfIndex Integer32
  hwNDPPortStatus INTEGER

HwNDPPortNbEntry  
SEQUENCE    
  hwNDPPortNbDeviceId OCTET STRING
  hwNDPPortNbPortName OCTET STRING
  hwNDPPortNbDeviceName OCTET STRING
  hwNDPPortNbPortMode INTEGER
  hwNDPPortNbProductVer OCTET STRING
  hwNDPPortNbHardVer OCTET STRING
  hwNDPPortNbBootromVer OCTET STRING
  hwNDPPortNbSoftVer OCTET STRING
  hwNDPPortNbAgingtime Integer32

HgmpNTDPInterfaceEntry  
SEQUENCE    
  hgmpNTDPInterfaceIfIndex Integer32
  hgmpNTDPInterfaceEnable INTEGER

HgmpNTDPCacheEntry  
SEQUENCE    
  hgmpNTDPCacheHashIndex Integer32
  hgmpNTDPCacheDeviceID OCTET STRING
  hgmpNTDPCacheClusterName OCTET STRING
  hgmpNTDPCacheClusterRole INTEGER
  hgmpNTDPCacheCapabilities INTEGER
  hgmpNTDPCacheVersion OCTET STRING
  hgmpNTDPCachePlatform OCTET STRING
  hgmpNTDPCacheMngVLAN INTEGER
  hgmpNTDPCacheHop INTEGER

HgmpNTDPTopEntry  
SEQUENCE    
  hgmpNTDPTopHashIndex Integer32
  hgmpNTDPTopEdgeStartDevID OCTET STRING
  hgmpNTDPTopEdgeIndex Integer32
  hgmpNTDPTopEdgeEndDevID OCTET STRING
  hgmpNTDPTopEdgeStartPort OCTET STRING
  hgmpNTDPTopEdgeStartPortFullDuplex INTEGER
  hgmpNTDPTopEdgeStartPortSpeed Integer32
  hgmpNTDPTopEdgeEndPort OCTET STRING
  hgmpNTDPTopLinkStatus INTEGER

Defined Values

hwCluster 1.3.6.1.4.1.43.45.1.6.7
This MIB contains objects to manage the hgmp operations, which are used on lanswitch products.
MODULE-IDENTITY    

hwClusterObject 1.3.6.1.4.1.43.45.1.6.7.1
This MIB contains objects to manage the cluster operations, which are used on lanswitch products.
Status: current Access: read-only
OBJECT-IDENTITY    

hgmpSetVLANSecurity 1.3.6.1.4.1.43.45.1.6.7.1.1
Configure whether to perform the VLAN check inside the cluster.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noSecurity(0), security(1)  

hgmpHandShakeInterval 1.3.6.1.4.1.43.45.1.6.7.1.2
Handshaking interval of the cluster member switches.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..255  

hgmpHandShakeHoldtime 1.3.6.1.4.1.43.45.1.6.7.1.3
Holdtime of administrator switch and member switch in the cluster.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..255  

hgmpGrpMemberTableChange 1.3.6.1.4.1.43.45.1.6.7.1.4
Add 1 to the member list after it changes. The administrator checks if the value has changed. If not, he will not read the list once more.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

hgmpMemberDisconRate 1.3.6.1.4.1.43.45.1.6.7.1.5
Disconnection times of the member and administrator switches divided by member number times 1000.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hgmpCmdLanswitchFlag 1.3.6.1.4.1.43.45.1.6.7.1.6
Administrator switch flag
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

hgmpCmdClusterName 1.3.6.1.4.1.43.45.1.6.7.1.7
Cluster name of the administrator switch
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..8)  

hgmpMngPriIpSegCMIP 1.3.6.1.4.1.43.45.1.6.7.1.8
The private management IP address of the administrator switch, which can not be modified after the cluster has been created.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hgmpMngPriIpMask 1.3.6.1.4.1.43.45.1.6.7.1.9
The private management IP address mask assigned by the administrator switch, which cannot be modified after the cluster has been created.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hgmpFtpServer 1.3.6.1.4.1.43.45.1.6.7.1.10
The cluster members can access the Ftp Server through the administrator switch, which can only be configured and accessed on the administrator switch.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hgmpTftpServer 1.3.6.1.4.1.43.45.1.6.7.1.11
The cluster members can access the Tftp Server through the administrator switch, which can only be configured and accessed on the administrator switch.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hgmpSnmpHost 1.3.6.1.4.1.43.45.1.6.7.1.12
The Snmp Host to send the cluster trap packets, which can only be configured and accessed on the administrator switch.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hgmpLogHost 1.3.6.1.4.1.43.45.1.6.7.1.13
Log host of the cluster, which can only be configured and accessed on the administrator switch.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hgmpGrpMemberTable 1.3.6.1.4.1.43.45.1.6.7.1.14
Table of cluster member switches
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HgmpGrpMemberEntry

hgmpGrpMemberEntry 1.3.6.1.4.1.43.45.1.6.7.1.14.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  HgmpGrpMemberEntry  

hgmpGrpMemberDeviceId 1.3.6.1.4.1.43.45.1.6.7.1.14.1.1
4 bytes reserved as 0x0 + 6 bytes of MAC address, expressed as a character string of the hexadecimal number.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..10)  

hgmpGrpMemberSerial 1.3.6.1.4.1.43.45.1.6.7.1.14.1.2
When adding member switch to the cluster, the administrator switch will assign an unique integer to identify it.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2047  

hgmpGrpMemberIpAddr 1.3.6.1.4.1.43.45.1.6.7.1.14.1.3
The private IP addresses of the member switches for the communication inside the cluster.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hgmpGrpMemberName 1.3.6.1.4.1.43.45.1.6.7.1.14.1.4
Hostname of the member switch
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hgmpGrpMemberPassword 1.3.6.1.4.1.43.45.1.6.7.1.14.1.5
Member password for joining a cluster
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hgmpGrpMemberPlatform 1.3.6.1.4.1.43.45.1.6.7.1.14.1.6
Set the hardware platform. A null string indicates the information does not exist in the device adjacency table.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hgmpGrpMemberStatus 1.3.6.1.4.1.43.45.1.6.7.1.14.1.7
Member status on the administrator switch, use for displaying the network management status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normal(0), fault(1)  

hgmpGrpMemberDisconCount 1.3.6.1.4.1.43.45.1.6.7.1.14.1.8
Count of inside communication disconnection between the member switch and the administrator switch.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hgmpGrpMemberEnrollTime 1.3.6.1.4.1.43.45.1.6.7.1.14.1.9
Enrollment time of the member, measured in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hgmpGrpMemberOperate 1.3.6.1.4.1.43.45.1.6.7.1.14.1.10
Operation indication field, indicates the operation of adding/removing a member by the network management agent.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hgmpMemberResetTable 1.3.6.1.4.1.43.45.1.6.7.1.15
Reset a member switch in the cluster.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HgmpMemberResetEntry

hgmpMemberResetEntry 1.3.6.1.4.1.43.45.1.6.7.1.15.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  HgmpMemberResetEntry  

hgmpMemberResetMAC 1.3.6.1.4.1.43.45.1.6.7.1.15.1.1
The management MAC address of the switch to be reset, which is the unique identifier of the switch.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..6)  

hgmpMemberEraseflash 1.3.6.1.4.1.43.45.1.6.7.1.15.1.2
Whether to erase the configuration file from the flash after resetting the switch. Read this node, cannotget(65535) will be returned.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noErase(0), erase(1), cannotget(65535)  

hgmpEventsV2 1.3.6.1.4.1.43.45.1.6.7.1.0
Definition point for cluster notifications.
Status: current Access: read-write
OBJECT-IDENTITY    

hgmpMemberfailure 1.3.6.1.4.1.43.45.1.6.7.1.0.1
When a cluster member failure, send a snmp trap to the network management.
Status: current Access: read-write
NOTIFICATION-TYPE    

hgmpMemberRecover 1.3.6.1.4.1.43.45.1.6.7.1.0.2
When a cluster member recover, send a snmp trap to the network management.
Status: current Access: read-write
NOTIFICATION-TYPE    

hgmpMemberStatusChange 1.3.6.1.4.1.43.45.1.6.7.1.0.3
When a cluster member status change, send a snmp trap to the network management.
Status: current Access: read-write
NOTIFICATION-TYPE    

hgmpNetTopChange 1.3.6.1.4.1.43.45.1.6.7.1.0.4
When net topology of this cluster change, send a snmp trap to the network management.
Status: current Access: read-write
NOTIFICATION-TYPE    

hgmpClusterRole 1.3.6.1.4.1.43.45.1.6.7.1.16
This switch's role in cluster.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER roleCMDSW(1), roleMEMBERSW(2), roleBAKSW(3), roleCASW(16), roleUNISW(17)  

hgmpClusterMaxPoolNum 1.3.6.1.4.1.43.45.1.6.7.1.17
Max switch members that the cluster can support(include administrator switch).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hgmpClusterCmdSwMac 1.3.6.1.4.1.43.45.1.6.7.1.18
The MAC address of administrator switch. It will be filled with zero when not be a member of cluster.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..6)  

hgmpRun 1.3.6.1.4.1.43.45.1.6.7.1.19
Enable cluster on this switch.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

hgmpProtocolMac 1.3.6.1.4.1.43.45.1.6.7.1.22
OBJECT IDENTIFIER    

hgmpClusterProtocolMac 1.3.6.1.4.1.43.45.1.6.7.1.22.1
Protocol MAC of HGMP protocol family. All multicast packets of this protocol family use this MAC as destination MAC.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

hgmpTopologyManagement 1.3.6.1.4.1.43.45.1.6.7.1.23
OBJECT IDENTIFIER    

hgmpWhitelistTable 1.3.6.1.4.1.43.45.1.6.7.1.23.1
Cluster switches white list table. White list topology is the topology which has been affirmed by network administrator in a cluster, and all devices in white list topology are recorded in this table. Against to white list table, black list table records the devices which are denied to join in cluster. Adding a black list device to white list table will cause a failure.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HgmpWhitelistEntry

hgmpWhitelistEntry 1.3.6.1.4.1.43.45.1.6.7.1.23.1.1
Entry items
Status: current Access: not-accessible
OBJECT-TYPE    
  HgmpWhitelistEntry  

hgmpWhitelistDeviceId 1.3.6.1.4.1.43.45.1.6.7.1.23.1.1.1
Unique identifier indicating a white list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(10)  

hgmpWhitelistSerial 1.3.6.1.4.1.43.45.1.6.7.1.23.1.1.2
When adding member switch to the cluster, the administrator switch will assign an unique integer to identify it. 0xffff means invalid value for this object.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2047 | 65535  

hgmpWhitelistRowStatus 1.3.6.1.4.1.43.45.1.6.7.1.23.1.1.3
The row status of this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hgmpWhitelistNbTable 1.3.6.1.4.1.43.45.1.6.7.1.23.2
Cluster switches white list neighboring information table. White list neighbor table records all neighbor devices for every white list device. In fact, white list neighbor table displays the whole white list topology.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HgmpWhitelistNbEntry

hgmpWhitelistNbEntry 1.3.6.1.4.1.43.45.1.6.7.1.23.2.1
Entry items
Status: current Access: not-accessible
OBJECT-TYPE    
  HgmpWhitelistNbEntry  

hgmpWhitelistNbIndex 1.3.6.1.4.1.43.45.1.6.7.1.23.2.1.1
Index of a switch which is the neighbor of a white list switch identified by 'hgmpWhitelistDeviceId'.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

hgmpWhitelistNbDeviceId 1.3.6.1.4.1.43.45.1.6.7.1.23.2.1.2
Unique identifier indicating a neighbor switch of a white list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(10)  

hgmpWhitelistPortName 1.3.6.1.4.1.43.45.1.6.7.1.23.2.1.3
The name of the port which a white list switch connects to the neighbor specified by 'hgmpWhitelistNbIndex'.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..47)  

hgmpWhitelistNbPortName 1.3.6.1.4.1.43.45.1.6.7.1.23.2.1.4
The name of the port which a neighbor device connects to the white list switch specified by 'hgmpWhitelistDeviceId'.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..47)  

hgmpBlacklistTable 1.3.6.1.4.1.43.45.1.6.7.1.23.3
Cluster switches black list table. The black list table records all black list devices, and a device in black list is not permitted to join in any cluster.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HgmpBlacklistEntry

hgmpBlacklistEntry 1.3.6.1.4.1.43.45.1.6.7.1.23.3.1
Entry items
Status: current Access: not-accessible
OBJECT-TYPE    
  HgmpBlacklistEntry  

hgmpBlacklistDeviceId 1.3.6.1.4.1.43.45.1.6.7.1.23.3.1.1
Unique identifier indicating a black list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(10)  

hgmpBlacklistAccessDeviceId 1.3.6.1.4.1.43.45.1.6.7.1.23.3.1.2
Unique identifier indicating the access device of a black list switch. Tracing from a black list device to the cluster commander switch, the device which the black list switch directly connects to is the access device. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. 10 bytes of 0xff means invalid value for this object. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(10)  

hgmpBlacklistAccessPortName 1.3.6.1.4.1.43.45.1.6.7.1.23.3.1.3
The port which the access device connecting to the black list switch is named access port, the object returns the access port name. An empty string means invalid value for this object.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..47)  

hgmpBlacklistRowStatus 1.3.6.1.4.1.43.45.1.6.7.1.23.3.1.4
The row status of this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hgmpMemberPriPortTable 1.3.6.1.4.1.43.45.1.6.7.1.24
This table contains port number for different network protocols on each member switch. The port number can be used to access a specified member switch with specified protocol and private IP address.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HgmpMemberPriPortEntry

hgmpMemberPriPortEntry 1.3.6.1.4.1.43.45.1.6.7.1.24.1
Information about a specified member private port entry. The indexes of the entry are hgmpGrpMemberDevId and hgmpMemberPriPortProto, which indicate entries in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  HgmpMemberPriPortEntry  

hgmpMemberDevId 1.3.6.1.4.1.43.45.1.6.7.1.24.1.1
Unique identifier indicating the switch in cluster. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..10)  

hgmpMemberPriPortProto 1.3.6.1.4.1.43.45.1.6.7.1.24.1.2
The index of this table. Each instance value of this object corresponds to a different protocol.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

hgmpMemberPriPortProtoDescr 1.3.6.1.4.1.43.45.1.6.7.1.24.1.3
It describes the hgmpMemberPriPortProtocol object value. For example, it is 'SNMP' when hgmpMemberPriPortProtocol value is 1.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hgmpMemberPriPortNum 1.3.6.1.4.1.43.45.1.6.7.1.24.1.4
The private port number of member switch, used by specified hgmpMemberPriPortProto. By using the private IP address, specified protocol and port number, other devices outside cluster can access member switch. The private IP address can be acquired by reading hgmpGrpMemberIpAddr.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwStackObject 1.3.6.1.4.1.43.45.1.6.7.2
This MIB contains objects to manage the stack operations, which is used on lanswitch products.
Status: current Access: read-only
OBJECT-IDENTITY    

hgmpStackMemberTableChange 1.3.6.1.4.1.43.45.1.6.7.2.1
Change identifier of the stack member table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

hgmpStackMemberDisconRate 1.3.6.1.4.1.43.45.1.6.7.2.2
Disconnection rate of the stack member switches.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hgmpMainLanswitchFlag 1.3.6.1.4.1.43.45.1.6.7.2.3
The status of the local switch in the stack.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

hgmpStackIpPoolStartIP 1.3.6.1.4.1.43.45.1.6.7.2.4
The first address of the management IP network segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hgmpStackIpPoolLength 1.3.6.1.4.1.43.45.1.6.7.2.5
The length of the management IP segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..200  

hgmpStackIpPoolMask 1.3.6.1.4.1.43.45.1.6.7.2.10
The mask of the management IP segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hgmpStackMemberTable 1.3.6.1.4.1.43.45.1.6.7.2.6
Stack member table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HgmpStackMemberEntry

hgmpStackMemberEntry 1.3.6.1.4.1.43.45.1.6.7.2.6.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  HgmpStackMemberEntry  

hgmpStackMemberDeviceId 1.3.6.1.4.1.43.45.1.6.7.2.6.1.1
2 bytes address type of the switch + 2 bytes zero + MAC address, expressed as a hexadecimal number string.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..10)  

hgmpStackMemberSerial 1.3.6.1.4.1.43.45.1.6.7.2.6.1.2
When adding a member switch to the stack, the master switch will assign an unique integer to identify it.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2047  

hgmpStackMemberIpAddr 1.3.6.1.4.1.43.45.1.6.7.2.6.1.3
The private member IP address for the communication inside the stack.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hgmpStackMemberName 1.3.6.1.4.1.43.45.1.6.7.2.6.1.4
Hostname of the member switch.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hgmpStackMemberPassword 1.3.6.1.4.1.43.45.1.6.7.2.6.1.5
Member password for joining a stack.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hgmpStackMemberPlatform 1.3.6.1.4.1.43.45.1.6.7.2.6.1.6
Set the hardware platform. A null string indicates the information does not exist in the device adjacency table.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hgmpStackMemberStatus 1.3.6.1.4.1.43.45.1.6.7.2.6.1.7
Member status on the master switch, use for displaying the network management status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normal(0), fault(1)  

hgmpStackMemberDisconCount 1.3.6.1.4.1.43.45.1.6.7.2.6.1.8
Count of inside communication disconnection between the member switch and the master switch.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hgmpStackMemberEnrollTime 1.3.6.1.4.1.43.45.1.6.7.2.6.1.9
Enrollment time of the member, measured in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hgmpStackRole 1.3.6.1.4.1.43.45.1.6.7.2.7
This switch's role status in stack.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER roleCMDSW(1), roleMEMBERSW(2), roleBAKSW(3), roleCASW(16), roleUNISW(17)  

hgmpStackMaxPoolNum 1.3.6.1.4.1.43.45.1.6.7.2.8
Max switch members in one stack that the switch support (include main switch).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hgmpStackMainSwMac 1.3.6.1.4.1.43.45.1.6.7.2.9
The MAC address of main switch. It will be 00.00.00 when not be a member of stack.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..6)  

hwNDPObject 1.3.6.1.4.1.43.45.1.6.7.5
This MIB contains objects to manage the ndp operations, which are used on lanswitch products.
Status: current Access: read-only
OBJECT-IDENTITY    

hwNDPStatus 1.3.6.1.4.1.43.45.1.6.7.5.1
NDP protocol module enable flag
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

hwNDPHelloTimer 1.3.6.1.4.1.43.45.1.6.7.5.2
NDP packet transmission interval, measured in seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 5..254  

hwNDPAgingTime 1.3.6.1.4.1.43.45.1.6.7.5.3
How long the NDP information of the local switch can be hold in the adjacent switch, measured in seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 5..255  

hwNDPChange 1.3.6.1.4.1.43.45.1.6.7.5.4
Change identifier of the Neighbor table
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwNDPPortTable 1.3.6.1.4.1.43.45.1.6.7.5.5
Configure to enable/disable the interface NDP of the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwNDPPortEntry

hwNDPPortEntry 1.3.6.1.4.1.43.45.1.6.7.5.5.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  HwNDPPortEntry  

hwNDPIfIndex 1.3.6.1.4.1.43.45.1.6.7.5.5.1.1
Unique identifier of an interface of the device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwNDPPortStatus 1.3.6.1.4.1.43.45.1.6.7.5.5.1.2
If it is enable, the device will send and receive the NDP packets via the interface. To disable the NDP function on the interface, set the entry as false.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

hwNDPPortNbTable 1.3.6.1.4.1.43.45.1.6.7.5.6
NDP neighbor information on the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwNDPPortNbEntry

hwNDPPortNbEntry 1.3.6.1.4.1.43.45.1.6.7.5.6.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  HwNDPPortNbEntry  

hwNDPPortNbDeviceId 1.3.6.1.4.1.43.45.1.6.7.5.6.1.1
2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..10)  

hwNDPPortNbPortName 1.3.6.1.4.1.43.45.1.6.7.5.6.1.2
Unique identifier of a port. A null string indicates that the field was not included in in the latest NDP packet. Interface type + card number / slot number / sequence number.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..47)  

hwNDPPortNbDeviceName 1.3.6.1.4.1.43.45.1.6.7.5.6.1.3
Device name. A null string indicates that the field was not included in the latest NDP packet.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwNDPPortNbPortMode 1.3.6.1.4.1.43.45.1.6.7.5.6.1.4
The neighbor port duplex mode.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER full(1), half(2), auto(3)  

hwNDPPortNbProductVer 1.3.6.1.4.1.43.45.1.6.7.5.6.1.5
Product version. A null string indicates that the field was not included in the latest NDP packet.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwNDPPortNbHardVer 1.3.6.1.4.1.43.45.1.6.7.5.6.1.6
Hardware version. A null string indicates that the field was not included in the latest NDP packet.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwNDPPortNbBootromVer 1.3.6.1.4.1.43.45.1.6.7.5.6.1.7
Bootrom version. A null string indicates that the field was not included in the latest NDP packet.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwNDPPortNbSoftVer 1.3.6.1.4.1.43.45.1.6.7.5.6.1.8
Software version. A null string indicates that the field was not included in the latest NDP packet.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwNDPPortNbAgingtime 1.3.6.1.4.1.43.45.1.6.7.5.6.1.9
How long the NDP information of the local switch can be hold in the adjacent switch, measured in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 5..255  

hwNTDPObject 1.3.6.1.4.1.43.45.1.6.7.4
This MIB contains objects to manage the ntdp operations, which are used on lanswitch products.
Status: current Access: read-only
OBJECT-IDENTITY    

hgmpNTDPCollectTopTime 1.3.6.1.4.1.43.45.1.6.7.4.1
Topology collection interval of the administrator switch of the cluster, measured in minutes.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

hgmpNTDPHopRange 1.3.6.1.4.1.43.45.1.6.7.4.2
Range of the topology collection of the administrator switch
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..16  

hgmpNTDPRun 1.3.6.1.4.1.43.45.1.6.7.4.3
Enable/Disable the NTDP function on the switch.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

hgmpNTDPPortDelay 1.3.6.1.4.1.43.45.1.6.7.4.4
Set the delay to forward the topology request via the ports, measured in milliseconds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..100  

hgmpNTDPHopDelay 1.3.6.1.4.1.43.45.1.6.7.4.5
Set the delay to forward the topology request from every hop, measured in milliseconds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..1000  

hgmpNTDPLastTopCollectDuration 1.3.6.1.4.1.43.45.1.6.7.4.6
Duration of the latest overall topology collection, a performance count measured in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hgmpNTDPCacheChange 1.3.6.1.4.1.43.45.1.6.7.4.7
Add 1 when the device table changes. The network administrator will check if it has changed before accessing the table. If it has not changed, he will not access again.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

hgmpNTDPTOPTableChange 1.3.6.1.4.1.43.45.1.6.7.4.8
Add 1 when the topology table changes. The network administrator will check if it has changed before accessing the table. If it has not changed, he will not access again.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

hgmpNTDPInterfaceTable 1.3.6.1.4.1.43.45.1.6.7.4.9
Enable/Disable the NTDP on the switch port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HgmpNTDPInterfaceEntry

hgmpNTDPInterfaceEntry 1.3.6.1.4.1.43.45.1.6.7.4.9.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  HgmpNTDPInterfaceEntry  

hgmpNTDPInterfaceIfIndex 1.3.6.1.4.1.43.45.1.6.7.4.9.1.1
Unique identifier an interface of the device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hgmpNTDPInterfaceEnable 1.3.6.1.4.1.43.45.1.6.7.4.9.1.2
If it is true, the device will send and receive the NTDP packets via the interface. To disable the NTDP function on the interface, set the entry as false.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

hgmpNTDPCacheTable 1.3.6.1.4.1.43.45.1.6.7.4.10
Access the information about the switch from the topology table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HgmpNTDPCacheEntry

hgmpNTDPCacheEntry 1.3.6.1.4.1.43.45.1.6.7.4.10.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  HgmpNTDPCacheEntry  

hgmpNTDPCacheHashIndex 1.3.6.1.4.1.43.45.1.6.7.4.10.1.1
Our NTDP information is saved in the HASH table on the administrator switch. Using DeviceID as index will lead to the comparison of a large amount of character strings, which puts too many burdens on the administrator switch. A HAHSIndex is added to reduce the character string comparison to the least range.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

hgmpNTDPCacheDeviceID 1.3.6.1.4.1.43.45.1.6.7.4.10.1.2
2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..10)  

hgmpNTDPCacheClusterName 1.3.6.1.4.1.43.45.1.6.7.4.10.1.3
Name of the cluster including the device.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hgmpNTDPCacheClusterRole 1.3.6.1.4.1.43.45.1.6.7.4.10.1.4
Cluster role of the current device, which can be a administrator switch (0x01), member switch(0x02), backup switch(0x03), candidate switch(0x10) or an independent switch (incapable of cluster member) (0x11).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER roleCOSW(1), roleMSW(2), roleBKSW(3), roleCASW(16), roleUNISW(17)  

hgmpNTDPCacheCapabilities 1.3.6.1.4.1.43.45.1.6.7.4.10.1.5
The capabilities of the device. FF indicates that the field was not included in in the latest NTDP packet.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hgmpNTDPCacheVersion 1.3.6.1.4.1.43.45.1.6.7.4.10.1.6
The version information of the corresponding device. A null string indicates that the field was not included in in the latest NTDP packet.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hgmpNTDPCachePlatform 1.3.6.1.4.1.43.45.1.6.7.4.10.1.7
Hardware platform. A null string indicates that the field was not included in the latest NTDP packet.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hgmpNTDPCacheMngVLAN 1.3.6.1.4.1.43.45.1.6.7.4.10.1.8
The management VLAN ID of the device.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hgmpNTDPCacheHop 1.3.6.1.4.1.43.45.1.6.7.4.10.1.9
Hops to this switch.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hgmpNTDPTopTable 1.3.6.1.4.1.43.45.1.6.7.4.11
Access the topology structure collected by the NTDP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HgmpNTDPTopEntry

hgmpNTDPTopEntry 1.3.6.1.4.1.43.45.1.6.7.4.11.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  HgmpNTDPTopEntry  

hgmpNTDPTopHashIndex 1.3.6.1.4.1.43.45.1.6.7.4.11.1.1
Our NTDP information is saved in the HASH table on the administrator switch. Using DeviceID as index will lead to the comparison of a large amount of character strings, which puts too many burdens on the administrator switch. A HAHSIndex is added to reduce the character string comparison to the least range.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

hgmpNTDPTopEdgeStartDevID 1.3.6.1.4.1.43.45.1.6.7.4.11.1.2
2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..10)  

hgmpNTDPTopEdgeIndex 1.3.6.1.4.1.43.45.1.6.7.4.11.1.3
Edge index of this entry in the data structure.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

hgmpNTDPTopEdgeEndDevID 1.3.6.1.4.1.43.45.1.6.7.4.11.1.4
2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..10)  

hgmpNTDPTopEdgeStartPort 1.3.6.1.4.1.43.45.1.6.7.4.11.1.5
The number of the first port of a topology edge. Interface type + card number / slot number / sequence number.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..47)  

hgmpNTDPTopEdgeStartPortFullDuplex 1.3.6.1.4.1.43.45.1.6.7.4.11.1.6
The full-duplex status of the first port on a topology edge.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER half(0), full(1)  

hgmpNTDPTopEdgeStartPortSpeed 1.3.6.1.4.1.43.45.1.6.7.4.11.1.7
The speed of the first port on a topology edge.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hgmpNTDPTopEdgeEndPort 1.3.6.1.4.1.43.45.1.6.7.4.11.1.8
The number of the last port of a topology edge. Interface type + card number / slot number / sequence number.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..47)  

hgmpNTDPTopLinkStatus 1.3.6.1.4.1.43.45.1.6.7.4.11.1.11
In STP or RSTP, it describes link status according to port STP steady status. In MSTP it describes STP steady status of the instance which management VLAN belongs to. Either 'hgmpNTDPTopEdgeStartPort' or 'hgmpNTDPTopEdgeEndPort' STP steady status is 'blocking', this object is 'blocking', otherwise is 'forwarding'. If STP or MSTP is disabled, this object is 'forwarding'.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER forwarding(1), blocking(2)  

hgmpStackEventsV2 1.3.6.1.4.1.43.45.1.6.7.2.0
Definition point for Stack notifications.
Status: current Access: read-only
OBJECT-IDENTITY    

hgmpStackMemberfailure 1.3.6.1.4.1.43.45.1.6.7.2.0.1
When a stack member failure, send a snmp trap to the network management.
Status: current Access: read-only
NOTIFICATION-TYPE    

hgmpStackMemberRecover 1.3.6.1.4.1.43.45.1.6.7.2.0.2
When a stack member Recover, send a snmp trap to the network management.
Status: current Access: read-only
NOTIFICATION-TYPE    

hgmpStackMemberStatusChange 1.3.6.1.4.1.43.45.1.6.7.2.0.3
When a stack member status change, send a snmp trap to the network management.
Status: current Access: read-only
NOTIFICATION-TYPE