A3COM-HUAWEI-DSP-MIB

File: A3COM-HUAWEI-DSP-MIB.mib (8976 bytes)

Imported modules

A3COM-HUAWEI-OID-MIB ENTITY-MIB SNMPv2-SMI

Imported symbols

h3cCommon PhysicalIndex OBJECT-TYPE
MODULE-IDENTITY NOTIFICATION-TYPE Integer32
TimeTicks

Defined Types

H3cVPMStatusEntry  
SEQUENCE    
  h3cVPMIndex Integer32
  h3cVPMEnPhysicalIndex PhysicalIndex
  h3cVPMState INTEGER
  h3cVPMResourceUtilization Integer32
  h3cVPMHiWaterUtilization Integer32
  h3cVPMMaxChannel Integer32

H3cDSPStatusEntry  
SEQUENCE    
  h3cDSPIndex Integer32
  h3cDSPVPMIndex Integer32
  h3cDSPEnPhysicalIndex PhysicalIndex
  h3cDSPResetTime TimeTicks
  h3cDSPMaxChannel Integer32
  h3cDSPState INTEGER
  h3cDSPInUseChannel Integer32

Defined Values

h3cDSP 1.3.6.1.4.1.43.45.1.10.2.89
This MIB is to provide the definition of the DSP(Digital Signal Processing) status.
MODULE-IDENTITY    

h3cVPMStatusTable 1.3.6.1.4.1.43.45.1.10.2.89.1
The table contains status parameters of VPM(Voice Process Module) card.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cVPMStatusEntry

h3cVPMStatusEntry 1.3.6.1.4.1.43.45.1.10.2.89.1.1
The entry of VPM status table.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cVPMStatusEntry  

h3cVPMIndex 1.3.6.1.4.1.43.45.1.10.2.89.1.1.1
The index for this entry. The sequence of VPM card in the chassis is from the top to bottom.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32 1..64  

h3cVPMEnPhysicalIndex 1.3.6.1.4.1.43.45.1.10.2.89.1.1.2
The object corresponds to PhysicalIndex in the chassis.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

h3cVPMState 1.3.6.1.4.1.43.45.1.10.2.89.1.1.3
The object indicates the current state of VPM card being monitored. normal(1) - VPM card in normal condition. warning(2) - VPM card has some problem and need attention. fatal(3) - VPM card is not functional. offLine(4) - VPM card is in off-line maintenance state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), warning(2), fatal(3), offLine(4)  

h3cVPMResourceUtilization 1.3.6.1.4.1.43.45.1.10.2.89.1.1.4
The object indicates the percentage of current DSP resource utilization of the VPM card. The utilization is a ratio of number of busy DSP resources (for handling calls, transcoding, voice compression,...) to the total available DSP resources.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

h3cVPMHiWaterUtilization 1.3.6.1.4.1.43.45.1.10.2.89.1.1.5
The object indicates the highest percentage of DSP resource utilization of the VPM card that have been occured.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

h3cVPMMaxChannel 1.3.6.1.4.1.43.45.1.10.2.89.1.1.6
The maximum number of channels can be supported in each VPM card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

h3cDSPStatusTable 1.3.6.1.4.1.43.45.1.10.2.89.2
The table contains status parameters of DSP(Digital Signal Processing) card.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDSPStatusEntry

h3cDSPStatusEntry 1.3.6.1.4.1.43.45.1.10.2.89.2.1
The entry of DSP status table.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cDSPStatusEntry  

h3cDSPIndex 1.3.6.1.4.1.43.45.1.10.2.89.2.1.1
The index for this entry. DSP is fixed on VPM card or chassis card. The sequence of DSP in the VPM card or chassis card is from right to left.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32 1..256  

h3cDSPVPMIndex 1.3.6.1.4.1.43.45.1.10.2.89.2.1.2
The object corresponds to VPMIndex in the chassis. If value of this object is non-zero, it is the index of VPM card.(DSP is in this VPM card.) If value of this object is 0, then the DSP is fixed in the chassis card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..64  

h3cDSPEnPhysicalIndex 1.3.6.1.4.1.43.45.1.10.2.89.2.1.3
The object corresponds to PhysicalIndex in the chassis.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

h3cDSPResetTime 1.3.6.1.4.1.43.45.1.10.2.89.2.1.4
The value of sysUpTime from the last DSP reset occurred.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

h3cDSPMaxChannel 1.3.6.1.4.1.43.45.1.10.2.89.2.1.5
The maximum number of channels can be supported in each DSP. The value is chosen in an implementation-dependent manner by the DSP functionality.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

h3cDSPState 1.3.6.1.4.1.43.45.1.10.2.89.2.1.6
The object indicates the current state of DSP being monitored. normal(1) - DSP in normal condition. fatal(3) - DSP is not functional. offLine(4) - DSP is in off-line maintenance state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), fatal(3), offLine(4)  

h3cDSPInUseChannel 1.3.6.1.4.1.43.45.1.10.2.89.2.1.7
The number of channels that are reserved for serving calls. The value is incremented when the DSP channel is reserved for call setup and is decremented after the DSP channel is free due to call disconnection.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

h3cDSPTrap 1.3.6.1.4.1.43.45.1.10.2.89.3
OBJECT IDENTIFIER    

h3cDSPTrapPrex 1.3.6.1.4.1.43.45.1.10.2.89.3.0
OBJECT IDENTIFIER    

h3cVPMStateChange 1.3.6.1.4.1.43.45.1.10.2.89.3.0.1
This trap is sent when VPM state changes.
Status: current Access: read-only
NOTIFICATION-TYPE    

h3cDSPStateChange 1.3.6.1.4.1.43.45.1.10.2.89.3.0.2
This trap is sent when DSP state changes.
Status: current Access: read-only
NOTIFICATION-TYPE