XYPLEX-SYSTEM-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises, Counter, Gauge, TimeTicks, IpAddress FROM RFC1155-SMI DisplayString FROM SNMPv2-TC OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215; xyplex OBJECT IDENTIFIER ::= { enterprises 33 } xSystem OBJECT IDENTIFIER ::= { xyplex 1 } -- This is a MIB module for all Xyplex systems -- Textual Conventions DateTime ::= OCTET STRING (SIZE (8)) -- This data type is used throughout the Xyplex private MIB -- to model an absolute date and time. -- In order, the octets contain the following information: -- century, year within century (0..99), month (1..12), -- day (1..31), hour (0..23), minute (0..59), -- second (0..59), hundredth (0..99). If the century -- value is zero, the date and time are unknown, and the -- other values are meaningless. AddressType ::= INTEGER { unknown(1), other(2), local(3), ip(4), ethernet(5) } -- This data type is used throughout the Xyplex private MIB -- to indicate the type of an address stored in a related -- octet string. -- the System group -- Implementation of this group is mandatory for all Xyplex -- systems. sysIdent OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) ACCESS read-write STATUS mandatory DESCRIPTION "An identification string for local and remote displays. Corresponds directly to SERVER IDENTIFICATION and the value labeled 'Identification:' on the SERVER CHARACTERISTICS display." ::= { xSystem 1 } sysDefineMode OBJECT-TYPE SYNTAX INTEGER { permOnly(1), operAndPerm(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The system's operation with regard to DEFINE commands. 'permOnly' indicates that DEFINE commands modify only the permanent data base. 'operAndPerm' indicates that DEFINE commands modify both operational and permanent data bases, unless specifically documented to the contrary. Corresponds to SERVER CHANGE and the presence of the label CHANGE in the SERVER CHARACTERISTICS display." ::= { xSystem 2 } sysDateTime OBJECT-TYPE SYNTAX DateTime ACCESS read-write STATUS mandatory DESCRIPTION "The system's current local date and time. Corresponds directly to SERVER DATE and SERVER TIME and the value in various displays." ::= { xSystem 3 } sysTimeZone OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) ACCESS read-write STATUS mandatory DESCRIPTION "The adjustment to apply to a universal (Greenwich) time received when down-line loaded, comprising two octets. The first octet is the number of hours west of universal, the second is the number of minutes. Corresponds directly to SERVER TIMEZONE and the value labeled 'Timezone:' in the SERVER CHARACTERISTICS display." ::= { xSystem 4 } sysLoadSoftware OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-write STATUS mandatory DESCRIPTION "The software file name to request for down-line load of the server. Corresponds directly to SERVER SOFTWARE, and the value labeled 'Software:' in the SERVER CHARACTERISTICS display." ::= { xSystem 5 } sysDump OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control for dumping the system's memory when the system crashes. Corresponds directly to SERVER DUMP and the presence of 'Dump' under the label 'Enabled Characteristics' in the SERVER CHARACTERISTICS display." ::= { xSystem 6 } sysMaintenancePassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..8)) ACCESS read-write STATUS mandatory DESCRIPTION "The password a management system must supply to force the system to reboot or use the system's remote console via the Maintenance Operation Protocol (MOP). Corresponds directly to SERVER MAINTENANCE PASSWORD. When setting this value, the management system must supply eight octets, filling with zeros from the first octet. That is, the value '1ab42' would be expressed as '0.0.0.0.0.1.ab.42'. Setting the value to zero disables the password check. When returning this value, the agent always returns a zero length OCTET STRING." ::= { xSystem 7 } sysLocalName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "The system's local name. Corresponds directly to SERVER NAME and the value labeled 'Name:' in the SERVER CHARACTERISTICS display." ::= { xSystem 8 } sysSoftwareVersionType OBJECT-TYPE SYNTAX INTEGER { alpha(1), beta(2), production(3), special(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The software version variant running in the system. Corresponds to the letter in the software version in the SERVER CHARACTERISTICS display. alpha 'A': alpha test beta 'B': beta test production null: normal, production software special 'S': special, custom software " ::= { xSystem 9 } sysSoftwareVersion OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) ACCESS read-only STATUS mandatory DESCRIPTION "The software version running in the system. In order, the octets contain major version, minor version, ECO, and pre-release number. Corresponds to the numbers in the software version in the SERVER CHARACTERISTICS display. For example, the version display for sysSoftwareVersionType 'production' and sysSoftwareVersion '2.2.0.0' is 'V2.2'. The version display for sysSoftwareVersionType 'beta' and sysSoftwareVersion '3.1.0.4' is 'V3.1B4'." ::= { xSystem 10 } sysRomVersion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The firmware version of the bootstrap ROM installed in the system. Corresponds directly to the value labeled 'Rom' in the SERVER CHARACTERISTICS display." ::= { xSystem 11 } sysHardwareType OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The type of hardware on which the system is running, with values as defined in Xyplex Assigned Numbers, Xyplex document number 420-0497. Corresponds directly to the value labeled 'Hardware Type:' in the UNIT display." ::= { xSystem 12 } sysHardwareVersion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This version of hardware on which the system is running. Corresponds directly to part of the value labeled 'HW' in the SERVER CHARACTERISTICS display." ::= { xSystem 13 } sysChassisType OBJECT-TYPE SYNTAX INTEGER { mx45xx(1), other(2), lanbusII(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of chassis in which the system is running. Corresponds directly to part of the value labeled 'HW' in the SERVER CHARACTERISTICS display." ::= { xSystem 14 } sysChassisVersion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This version of chassis in which the system is running. Corresponds directly to part of the value labeled 'HW' in the SERVER CHARACTERISTICS display." ::= { xSystem 15 } sysCrash OBJECT-TYPE SYNTAX INTEGER { ready(1), execute(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control to cause this system to crash. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' causes an immediate crash. Corresponds to the CRASH command." ::= { xSystem 16 } sysInitialize OBJECT-TYPE SYNTAX INTEGER { ready(1), conditionalExecute(2), unconditionalExecute(3), cancel(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Control to cause this system to reset its software to initial load values, typically by reloading. When executing an initialize command, the system observes the value of sysInitializeDelay as supplied anywhere in the same set request with sysInitialize. If this value is not included in the set request, the system uses its default value. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'conditionalExecute' causes initialization if the overall system state is acceptible (such as not needing to store permanent parameters). Setting it to 'unconditionalExecute' causes initialization regardless of the overall system state. Setting it to 'cancel' aborts an initialization that has not yet started. According to standard SNMP operation, if the system is not in a proper state to accept a given set request for this value, it returns the standard SNMP error 'badValue'. Corresponds to the INITIALIZE command." ::= { xSystem 17 } sysInitializeDelay OBJECT-TYPE SYNTAX INTEGER (0..32768) ACCESS read-write STATUS mandatory DESCRIPTION "The number of minutes to delay before beginning the system initialization process as executed with sysInitialize. This value cannot be set outside a set-request that contains the value 'execute' for sysInitialize. If not included in such a set, the default value is 1. Corresponds to the INITIALIZE command's DELAY parameter and to the value labeled 'Minutes to shutdown:' in the SYSTEM STATUS display." ::= { xSystem 18 } sysZeroAll OBJECT-TYPE SYNTAX INTEGER { ready(1), execute(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control to zero all counters. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' causes all the system's counters to be zeroed. Corresponds to the ZERO ALL command." ::= { xSystem 19 } sysZeroBase OBJECT-TYPE SYNTAX INTEGER { ready(1), execute(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control to zero all base counters. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' causes all the system's base counters to be zeroed. Examples of counters that are zeroed are the SNMP counters or the counters from the SYSTEM COUNTERS display. Examples of counters that are not zeroed are Ethernet interface counters or port counters. Corresponds to the ZERO SYSTEM command." ::= { xSystem 20 } sysZeroBaseTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The number hundredths of a second since the most recent zeroing of the base counters, such as through execution of sysZeroAll or sysZeroBase. Corresponds directly to the value labeled 'Seconds Since Zeroed:' in the SERVER COUNTERS display." ::= { xSystem 21 } sysLoaderName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the system that provided this system's running software. Corresponds directly to the value labeled 'Primary Host:' in the SERVER STATUS display." ::= { xSystem 22 } sysLoaderAddressType OBJECT-TYPE SYNTAX AddressType ACCESS read-only STATUS mandatory DESCRIPTION "The type of network address contained in sysLoaderAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'local' means there is no address and this system's software was loaded from local storage. 'ip' is an Internet IP address. 'ethernet' is an 802.3 MAC address. Corresponds indirectly to the value labeled 'Load Address:' in the SERVER STATUS display." ::= { xSystem 23 } sysLoaderAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The network address of the system that provided this system's running software. Corresponds directly to the value labeled 'Load Address:' in the SERVER STATUS display." ::= { xSystem 24 } sysDumperAddressType OBJECT-TYPE SYNTAX AddressType ACCESS read-only STATUS mandatory DESCRIPTION "The type of network address contained in sysDumperAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'local' means there is no address and this system's was dumped to local storage. 'ip' is an Internet IP address. 'ethernet' is an 802.3 MAC address. Corresponds indirectly to the value labeled 'Dump Address:' in the SERVER STATUS display." ::= { xSystem 25 } sysDumperAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The network address of the system that most recently accepted a crash dump from this system. Corresponds directly to the value labeled 'Dump Address:' in the SERVER STATUS display." ::= { xSystem 26 } sysResourceLacks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times a local resource allocation failed, for example due to lack of dynamic memory. Corresponds directly to the value labeled 'Resource Errors:' in the SERVER STATUS display." ::= { xSystem 27 } sysChassisState OBJECT-TYPE SYNTAX INTEGER { notApplicable(1), noFault(2), fault(3) } ACCESS read-only STATUS mandatory DESCRIPTION "For chassis-based systems, the state of the overall chassis. 'notApplicable' indicates the system is not chassis based. 'noFault' indicates no current chassis problem. 'fault' indicates a current chassis problem such as a card or power supply failure. Corresponds directly to the value labeled 'Crate Current State: in the SERVER ALTERNATE STATUS display." ::= { xSystem 28 } sysChassisFaultTransitions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this system has seen sysChassisState switch from 'noFault' to 'fault' or from 'fault' to 'noFault'. Corresponds directly to the value labeled 'Crate Transition Count: in the SERVER ALTERNATE STATUS display." ::= { xSystem 29 } sysResourceNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of resource entries in the Resource table." ::= { xSystem 30 } sysFeatureNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of feature entries in the Feature table." ::= { xSystem 31 } -- more base objects following tables -- the Resource table resTable OBJECT-TYPE SYNTAX SEQUENCE OF ResEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of resource entries. The number of entries is given by the value of sysResourceNumber." ::= { xSystem 32 } resEntry OBJECT-TYPE SYNTAX ResEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Status values for a system resource." INDEX { resType } ::= { resTable 1 } ResEntry ::= SEQUENCE { resType INTEGER, resCurrent Gauge, resWorst Gauge, resAdminMaximum INTEGER, resLacks INTEGER, resLackTime DateTime, resOperMaximum INTEGER } resType OBJECT-TYPE SYNTAX INTEGER { cpuPercent(1), memoryPercent(2), process(3), timer(4), packetBuffer(5), ipcMessage(6), textPool(7), freeMemory(8), globalMemoryPercent(9), phivDecnetRouteCache(10), ipFilterCache(11), ipRouteCache(12), ipxRouteCache(13), ipPolicyTable(14), ipFilterTable(15) } ACCESS read-only STATUS mandatory DESCRIPTION "Identification of a resource type. Typically corresponds directly to a label such as 'Processes:' in the SERVER ALTERNATE STATUS display." ::= { resEntry 1 } resCurrent OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of resources currently in use on the system. Typically corresponds directly to a value labeled 'Cur' in the SERVER ALTERNATE STATUS display." ::= { resEntry 2 } resWorst OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The highest or lowest value of resCurrent since system initialization. Typically corresponds directly to a value labeled 'High' or 'Low' in the SERVER ALTERNATE STATUS display." ::= { resEntry 3 } resAdminMaximum OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The desired maximum possible number of resources in the system. In many cases, ACCESS to this object for a particular resType is read-only. Typically corresponds directly to a value labeled 'Max' in the SERVER ALTERNATE STATUS display for desired, administrative values. When the desired change takes effect is implementation specific, ranging from immediately to the next system initialization." ::= { resEntry 4 } resLacks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times since system initialization that the system could not obtain the resource because none were available. Typically corresponds directly to a value labeled 'Failure' in the SERVER ALTERNATE STATUS display. If such failures do not apply to the particular resource, such as 'cpuPercent', the agent returns zero for this object." ::= { resEntry 5 } resLackTime OBJECT-TYPE SYNTAX DateTime ACCESS read-only STATUS mandatory DESCRIPTION "The local system date and time when resLack last increased. Typically corresponds directly to a value labeled 'Last Occurred' in the SERVER ALTERNATE STATUS display. If such failures do not apply to the particular resource, such as 'cpuPercent', the agent returns all zeroes (unknown) for this object." ::= { resEntry 6 } resOperMaximum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current maximum possible number of resources in the system. Typically corresponds directly to a value labeled 'Max' in the SERVER ALTERNATE STATUS display for current operational values. This value is based on current or previous value of resAdminMaximum." ::= { resEntry 7 } -- the Feature table featTable OBJECT-TYPE SYNTAX SEQUENCE OF FeatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of feature entries. The number of entries is given by the value of sysFeatureNumber." ::= { xSystem 33 } featEntry OBJECT-TYPE SYNTAX FeatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Status values for a system feature." INDEX { featType } ::= { featTable 1 } FeatEntry ::= SEQUENCE { featType INTEGER, featStatus INTEGER } featType OBJECT-TYPE SYNTAX INTEGER { help(1), snmp(2), xremote(3), tn3270(4), menu(5), multisessions(6), lat(7), eventLog(8), internetSecurity(9), slip(10), scriptServer(11), kerberos(12), telnet(13), rlogin(14) } ACCESS read-only STATUS mandatory DESCRIPTION "Identification of a feature type. Corresponds to a SERVER feature keyword." ::= { featEntry 1 } featStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The status of the feature as of the next system initialization. Corresponds to the presence of the feature's lable following the label 'Enabled Feature(s): in the UNIT display." ::= { featEntry 2 } -- the Boot Control group -- The Boot Control group contains parameters to control -- how a system loads and dumps its runtime software and -- parameters. Typically these parameters are kept for -- and used by system initialization firmware. -- This group is mandatory for systems that offer runtime -- control of these parameters, and omitted in systems -- that do not. bootControl OBJECT IDENTIFIER ::= { xSystem 34 } bootControlLoadInternetFile OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-write STATUS mandatory DESCRIPTION "The filename to request when loading an image via TFTP. Corresponds directly to SERVER INTERNET LOAD FILE and the value labeled 'Internet Load File:' in the SERVER BOOT CHARACTERISTICS display." ::= { bootControl 1 } bootControlLoadInternetServer OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The internet address of the server to use when loading an image via TFTP. Corresponds directly to SERVER INTERNET LOAD HOST and the value labeled 'Internet Load Host:' in the SERVER BOOT CHARACTERISTICS display." ::= { bootControl 2 } bootControlLoadInternetGateway OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The internet address of the gateway to use when loading an image via TFTP. Corresponds directly to SERVER INTERNET LOAD GATEWAY and the value labeled 'Internet Load Gateway:' in the SERVER BOOT CHARACTERISTICS display." ::= { bootControl 3 } bootControlLoadBootpTftp OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control for loading via the combination of BOOTP and TFTP. Corresponds to SERVER LOAD PROTOCOL BOOTPTFTP and the presence of 'BOOTP/TFTP/' following the label 'Load Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display." ::= { bootControl 4 } bootControlLoadTftpDirect OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control for loading via directed TFTP. Corresponds to SERVER LOAD PROTOCOL TFTPDIRECT and the presence of 'TFTPDIRECT' following the label 'Load Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display." ::= { bootControl 5 } bootControlLoadLocal OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control for loading from a local medium. Corresponds to SERVER LOAD PROTOCOL LOCAL and the presence of 'LOCAL' following the label 'Load Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display." ::= { bootControl 6 } bootControlLoadMop OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control for loading via DEC MOP. Corresponds to SERVER LOAD PROTOCOL MOP and the presence of 'MOP' following the label 'Load Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display." ::= { bootControl 7 } bootControlLoadProprietary OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control for loading via Xyplex-proprietary extended MOP. Corresponds to SERVER LOAD PROTOCOL PROPRIETARY and the presence of 'Proprietary' following the label 'Load Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display." ::= { bootControl 8 } bootControlLoadRarpTftp OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control for loading via the combination of RARP and TFTP. Corresponds to SERVER LOAD PROTOCOL RARPTFTP and the presence of 'RARP/TFTP' following the label 'Load Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display." ::= { bootControl 9 } bootControlDumpBootpTftp OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control for dumping via the combination of BOOTP and TFTP. Corresponds to SERVER DUMP PROTOCOL BOOTPTFTP and the presence of 'BOOTP/TFTP' following the label 'Dump Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display." ::= { bootControl 10 } bootControlDumpLocal OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control for dumping to a local medium. Corresponds to SERVER DUMP PROTOCOL LOCAL and the presence of 'Local' following the label 'Dump Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display." ::= { bootControl 11 } bootControlDumpMop OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control for dumping via DEC MOP. Corresponds to SERVER DUMP PROTOCOL MOP and the presence of 'MOP' following the label 'Dump Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display." ::= { bootControl 12 } bootControlDumpProprietary OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control for dumping via Xyplex-proprietary extended MOP. Corresponds to SERVER DUMP PROTOCOL PROPRIETARY and the presence of 'Proprietary' following the label 'Dump Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display." ::= { bootControl 13 } bootControlDumpRarpTftp OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control for dumping via the combination of RARP and TFTP. Corresponds to SERVER DUMP PROTOCOL RARPTFTP and the presence of 'RARP/TFTP' following the label 'Dump Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display." ::= { bootControl 14 } bootControlParamBootpTftp OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control for loading parameters via the combination of BOOTP and TFTP. Corresponds to SERVER PARAMETER PROTOCOL MOP and the presence of 'BOOTP/TFTP' following the label 'Parameter Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display." ::= { bootControl 15 } bootControlParamLocal OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control for loading parameters from a local medium. Corresponds to SERVER PARAMETER PROTOCOL LOCAL and the presence of 'LOCAL' following the label 'Parameter Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display." ::= { bootControl 16 } bootControlParamMop OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control for loading parameters via DEC MOP. Corresponds to SERVER PARAMETER PROTOCOL MOP and the presence of 'MOP' following the label 'Parameter Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display." ::= { bootControl 17 } bootControlParamProprietary OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control for loading parameters via Xyplex-proprietary extended MOP. Corresponds to SERVER PARAMETER PROTOCOL PROPRIETARY and the presence of 'Proprietary' following the label 'Parameter Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display." ::= { bootControl 18 } bootControlParamRarpTftp OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control for loading parameters via the combination of RARP and TFTP. Corresponds to SERVER PARAMETER PROTOCOL RARPTFTP and the presence of 'RARP/TFTP' following the label 'Parameter Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display." ::= { bootControl 19 } -- the System group, basic parameters continued sysInstalledMemory OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The total number of bytes of main memory installed in the system. Corresponds directly to the value labeled 'Installed' on the SERVER ALTERNATE STATUS display." ::= { xSystem 35 } -- System traps resourceLack TRAP-TYPE ENTERPRISE xSystem VARIABLES { resType } DESCRIPTION "Indication that the system incremented the corresponding value of resLacks." ::= 1 END