-- -- she-adsl-mib.mib -- MIB generated by MG-SOFT Visual MIB Builder Version 6.0 Build 88 -- Tuesday, September 23, 2008 at 16:21:04 -- -- Start of ClearCase branch-information of current release: -- she-adsl-mib.mib /main/she_main_grf/26 -- End of ClearCase branch-information. -- SHE-ADSL-MIB DEFINITIONS ::= BEGIN IMPORTS AdslLineCodingType, AdslPerfTimeElapsed, AdslPerfCurrDayCount, AdslPerfPrevDayCount FROM ADSL-TC-MIB she, DisplayString FROM AN-MIB ifNumber, ifIndex, InterfaceIndex FROM IF-MIB PerfCurrentCount, PerfIntervalCount FROM PerfHist-TC-MIB sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity, SheAlarmSevProfileIndex FROM SHE-ALARMING-MIB SheControlStatusType FROM SHE-TC-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF transmission, Integer32, Unsigned32, Gauge32, Counter32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI VariablePointer, TruthValue, TEXTUAL-CONVENTION FROM SNMPv2-TC; sheAdslMib MODULE-IDENTITY LAST-UPDATED "200809231000Z" -- September 23, 2008 at 10:00 GMT ORGANIZATION "Nokia Siemens Networks " CONTACT-INFO "Gerd Barchmann COO BBA DSLAM RD SDE gerd.barchmann@nsn.com +49 3834 555654" DESCRIPTION "The MIB module to describe ADSL product. The MIB module that provides objects that are proprietary and extension to ADSL- LINE-MIB.The MIB includes the following Tables. 1.) adslLineTable 2.) adslAtucPhysTable 3.) adslAturPhysTable 4.) adslAtucChanTable 5.) adslAturChanTable 6.) adslAtucPerfDataTable 7.) adslAtucIntervalTable 8.) adslAtucChanPerfDataTable 9.) adslAturChanPerfDataTable 10.) adslAtucChanIntervalTable 11.) adslAturChanIntervalTable 12.) adslLineConfProfileTable 13.) adslLineConfExtnProfileTable 13.) adslLineAlarmConfProfileTable 14.) adslVccTpTable 15.) adslRfiMaskTable" REVISION "200608231228Z" -- August 23, 2006 at 12:28 GMT DESCRIPTION "Take over by Gerd Barchmann for R2.5. Merge on base she MIB version 151." REVISION "200609200842Z" -- September 20, 2006 at 08:42 GMT DESCRIPTION "Delete entrys from extnProfileControl-group for elements which could not be modified. Same for extnProfileModified-notification. Move AdslLineAlarm's to separate group (like in vshe). " REVISION "200610041111Z" -- October 04, 2006 at 11:11 GMT DESCRIPTION "Add support for dualLatency. Needed changes made for access channeltable's and new parameter in vcctp-table. SHE releases smaller then R2.5 will support old channel tables without channeltype index (NO dualLatency support)! SHE release R2.5 and higher support new channel tables with additional channeltype index (dualLatency supported)! Add some removed elements for backward compatibility of the managment system. The NE release up R2.5 will still NOT support this elements!" REVISION "200610170846Z" -- October 17, 2006 at 08:46 GMT DESCRIPTION "New merge with SHE R2.3 MIB-Version 153. Expand value list for SheAdslLineConfUpstreamPSDMaskSelectionType." REVISION "200611211423Z" -- November 21, 2006 at 14:23 GMT DESCRIPTION "Minor corrections for backward compatibility. OID changes for sheAdslAtuc-Notifications (also backward compatibility). Modify description for usedDslChannel in VccTp-Table. Modify description for linetype configuration." REVISION "200612151140Z" -- December 15, 2006 at 11:40 GMT DESCRIPTION "Minor corrections for backward compatibility. Correct default value for VccTp-UsedChannel." REVISION "200701220821Z" -- January 22, 2007 at 08:21 GMT DESCRIPTION "Merge with SHE R2.3 MIB release 156." REVISION "200702061436Z" -- February 06, 2007 at 14:36 GMT DESCRIPTION "Expand range for SheAdslConfMinInpType." REVISION "200703281219Z" -- March 28, 2007 at 12:19 GMT DESCRIPTION "New for R2.5.2. Add sheAdslLineDpboProfileTable. Assignment via sheAdslLineTable. Add separate INP configuration value for US direction to extn. Profile. Add sheAdslVccTpPerformanceCounter - Table. Add sheAdslVccTpEncapType to sheAdslVccTpTable." REVISION "200704160852Z" -- April 16, 2007 at 08:52 GMT DESCRIPTION "Add enum value for support adsl2adsl2PlusOnly standard via sheAdslLineConfExtnProfileStandard value. Add modified trap for DpboProfile assignment." REVISION "200705091118Z" -- May 09, 2007 at 11:18 GMT DESCRIPTION "Correct type for VccTpAlarmSeverityIndex." REVISION "200706061028Z" -- June 06, 2007 at 10:28 GMT DESCRIPTION "Correct only descripions regarding feature support in version SHE R2.6." REVISION "200706291253Z" -- June 29, 2007 at 12:53 GMT DESCRIPTION "Correct setting for sheAdslLineControlRfiBandMask." REVISION "200707121139Z" -- July 12, 2007 at 11:39 GMT DESCRIPTION "sheAdslLineDpboProfileMof not longer supported. Correct description for MinINP=0. Merge MIB release 160 from SHE R2.3 -> support for SES and UAS ThresholdAlarms. Merge MIB release for SHE R2.4 -> sheAdslLineInpValueTruncatedInto2 added into sheAdslConfigurationTraps and add sheAdslAtucPhysCurrentBinStatus." REVISION "200708231524Z" -- August 23, 2007 at 15:24 GMT DESCRIPTION "Expand AtucPhys and AturPhys table with BinBitLoading parameters." REVISION "200709201241Z" -- September 20, 2007 at 12:41 GMT DESCRIPTION "Modify sheAdslLineInpValueTruncatedInto2 object list (requested by Zhao Ran)." REVISION "200711081046Z" -- November 08, 2007 at 10:46 GMT DESCRIPTION "Support additional parameters for DELT status in AtuxPhysTable with SHE R2.4. Correct syntax for SheAdslLineConfNtrType. Add parameter to AdslLineAlarmConfModifiedTrap." REVISION "200802221347Z" -- February 22, 2008 at 13:47 GMT DESCRIPTION "Correct description of minInp value 0 -> null!" REVISION "200803191127Z" -- March 19, 2008 at 11:27 GMT DESCRIPTION "Add detailed failure returncode definitions to ReqResult enum. The scheduled support release is not defined yet." REVISION "200804211052Z" -- April 21, 2008 at 10:52 GMT DESCRIPTION "Add support for a dynamic use of annex types A/B/I/J by a single adsl line profile. Support will start with SHE R2.8. This causes some restrictions to extn. profile parameter settings. A new specific profile create command was defined." REVISION "200809231618Z" -- September 23, 2008 at 16:18 GMT DESCRIPTION "Add missing value for AdvertisedCapability definition." ::= { she 6 } -- -- Type definitions -- SheDslSystemType ::= INTEGER { adsl(1), sdsl(2), shdsl(3) } SheDslSystemLineCodingType ::= INTEGER { other(1), dmt(2), cap(3), qam(4) } SheDslSystemTxCfgType ::= BITS { unused(0), etsi(1), q9921PotsNonOverlapped(2), q9921PotsOverlapped(3), q9921IsdnNonOverlapped(4), q9921IsdnOverlapped(5), q9921TcmIsdnNonOverlapped(6), q9921TcmIsdnOverlapped(7), q9922PotsNonOverlapped(8), q9922PotsOverlapped(9), q9922TcmIsdnNonOverlapped(10), q9922TcmIsdnOverlapped(11), q9922TcmIsdnSymmetric(12), adslPlusPotsNonOverlapped(13) } -- This type specifies the user commands (control requests) -- from the TMN-OS or LCT. SheAdslControlRequestType ::= INTEGER { noRequest(1), setDslSystemLineTxCfg(101), createAdslLineConfProfile(150), modifyAdslLineConfProfile(151), deleteAdslLineConfProfile(152), createAdslLineConfProfileAnnexA(155), createAdslLineConfProfileAnnexB(156), createAdslLineConfProfileAdsl2PlusAnnexB(157), modifyAdslLineConfExtnProfile(161), modifyAdslLineEntry(201), modifyAdslLineAlarmConfProfileEntry(202), modifyAdslLineDeltConfEntry(203), forceAdslLinePwrMgmtState(204), clearAdslLinePerfCounter(205), modifyAdslLineRfiBandMask(206), setAdslLineDpboProfileEntry(210), createAdslLineAlarmConfProfile(250), modifyAdslLineAlarmConfProfile(251), deleteAdslLineAlarmConfProfile(252), createAdslLineDpboProfile(270), modifyAdslLineDpboProfile(271), deleteAdslLineDpboProfile(272), createAdslVccTp(301), deleteAdslVccTp(302), modifyAdslVccTp(303), modifyAdslVccTpLoopTest(304), modifyAdslVccTpEgressShaping(305), modifyAdslVccTpIngressPolicing(306), modifyAdslVccTpEncap(307), modifyAdslVccTpAdminState(315), modifyAdslVccTpOrl(316), modifyAdslVccTpUsedDslChannel(321), deleteAdslVccTpPerformanceCounters(325), createAdslRfiBand(351), deleteAdslRfiBand(352), createAdslLineConfProfileAdsl2AnnexI(400), createAdslLineConfProfileAdsl2AnnexJ(401), createAdslLineConfProfileAdsl2PlusAnnexI(402), createAdslLineConfProfileAdsl2PlusAnnexJ(403), createAdslLineConfProfileAdsl2AnnexM(404), createAdslLineConfProfileAdsl2PlusAnnexM(405), createAdslLineConfProfileAdsl2PlusDynamic(410) } -- This type specifies the result of user commands (control requests) -- from the TMN-OS or LCT. SheAdslControlRequestResultType ::= INTEGER { noRequest(1), comExecStarted(30), paramFaulty(31), requestBusy(32), setDataFailed(34), aswTimeout(35), commandFailed(36), commandSucceeded(37), profileNameStringUnknown(2001), profileNameToLong(2002), profileNameAlreadyExist(2003), maxNumberOfProfilesReached(2004), profileNotExist(2005), profileAssignFailOnActivePort(2006), profileTypDefaultCouldNotModified(2010), profileCreateFailOnInvalidArguments(2011), profileModifyFailOnInvalidArguments(2012), profileModifyFailOnInvalidMarginSettings(2013), profileModifyFailOnInvalidDataRateSettings(2014), profileLineTypModifyFailOnAssignedProfiles(2015), internalFailureWriteToDataBase(2020), internalFailureReadFromDataBase(2021), profileUsedByActivePorts(2022), internalFailureDuringIuCommunication(2030), portNumberNotExist(2040), portNumberHasWrongDSLType(2041), profileMinBandwithNotSatisfiedForCAC(2050) } SheAdslLineConfRateModeType ::= INTEGER { fixed(1), adaptAtStartup(2), adaptAtRuntime(3) } SheAdslLineTrellisModeType ::= INTEGER { unknown(0), trellisOn(1), trellisOff(2) } SheAdslLineConfRsIntCorrectionType ::= INTEGER { value125us(3), value250us(4), value500us(5), value1ms(6), value2ms(7), value4ms(8), disable(15) } SheAdslConfLineType ::= INTEGER { noChannel(1), fastOnly(2), interleavedOnly(3), fastOrInterleaved(4), fastAndInterleaved(5) } SheAdslLineConfExtnProfileRxBinAdjustType ::= INTEGER (0) SheAdslLineConfTriggerModeType ::= INTEGER { disable(0), locCrc(1), rmtCrc(2), snrInc(4), snrDec(8) } SheAdslLineConfExtnProfileAdi2xType ::= INTEGER (1) -- SheAdslLineConfStandardType ::= INTEGER { t1413(0), gLite(1), gDmt(2), multiMode(4), adsl2(26), adsl2Plus(27), readsl2(28), adsl2Auto(29), adsl2PlusAuto(30), adsl2adsl2PlusOnly(31) } SheAdslLineConfInitiateType ::= INTEGER { waitPn(0), ctone(1), initiatePn(128) } -- SheAdslLineConfAttenuationType ::= INTEGER { attenuation0(0), attenuation1(1), attenuation2(2), attenuation3(3), attenuation4(4), attenuation5(5), attenuation6(6), attenuation7(7), attenuation8(8), attenuation9(9), attenuation10(10), attenuation11(11), attenuation12(12), attenuation13(13), attenuation14(14), attenuation15(15), attenuation16(16), attenuation17(17), attenuation18(18), attenuation19(19), attenuation20(20), attenuation21(21), attenuation22(22), attenuation23(23), attenuation24(24), attenuation25(25), attenuation26(26), attenuation27(27), attenuation28(28), attenuation29(29), attenuation30(30), attenuation31(31), attenuation32(32), attenuation33(33), attenuation34(34), attenuation35(35), attenuation36(36), attenuation37(37), attenuation38(38), attenuation39(39), attenuation40(40) } -- -- SheAdslLineConfGainType ::= INTEGER { gain0(0), gain1(4096), gain2(8192), gain3(12288), gain4(16384), gain5(20480), gain6(24576), gain7(28672), auto(65280) } SheAdslLineConfRsFastOvrhdType ::= INTEGER { ovrHd50(1), ovrHd25(2), ovrHd12(3), ovrHd6(4), ovrHd3(5), ovrHd1(7), disable(15) } SheAdslLineConfEnableType ::= INTEGER { disable(0), enable(1) } SheAdslLineConfExpandedExchangeType ::= INTEGER { short(0), expanded(32768) } SheAdslLineConfEnableSpecial3Type ::= INTEGER { enable(0), disable(32768) } SheAdslLineConfEnableSpecial2Type ::= INTEGER { disable(0), enable(32768) } SheAdslLineConfNtrType ::= INTEGER { localOcs(0), refck8K(1) } SheAdslLineConfAnnexType ::= INTEGER { annexA(0), annexB(1), highSpeed(2), annexAdsl2(5), annexI(10), annexJ(11), annexM(12), dynamic(50) } SheAdslLineConfExtnProfileAlctlUsVerType ::= INTEGER (2) SheAdslLineConfIntDephtType ::= INTEGER { value64(0), value128(4096), value256(8192) } SheAdslLineConfAdvertisedCapabilitiesType ::= INTEGER { disable(0), annexA(1), annexb(2), annexI(9), annexJ(10), annexM(13), adslPlus(16), adslPlusAnnexA(17) } -- -- SheAdslLineConfPsdMaskType ::= INTEGER { adsl(0), hsadslM1(3), hsadslM2(4), adsl2NonOvlpFlat(259), adsl2NonOvlpM1(275), adsl2NonOvlpM2(291), msk2Rf1(32768), flatMskRfi(32771), cabMsk2Rfi(32772) } SheAdslLineConfLineDmtConfModeType ::= INTEGER { ecMode(1), fdmMode(2) } SheAdslLineConfRsMemoryType ::= INTEGER { present(0), notpresent(32768) } SheAdslConfMinInpType ::= INTEGER { null(0), halfSymbol(50), oneSymbol(100), twoSymbol(200), threeSymbol(203), fourSymbol(204), fiveSymbol(205), sixSymbol(206), sevenSymbol(207), eigthSymbol(208), nineSymbol(209), tenSymbol(210), elevenSymbol(211), twelveSymbol(212), thirteenSymbol(213), fourteenSymbol(214), fifteenSymbol(215), sixteenSymbol(216), auto(400) } SheAdslLineConfUpstreamPSDMaskSelectionType ::= INTEGER { noSelection(0), adlu32eu32(1), adlu36eu36(2), adlu40eu40(3), adlu44eu44(4), adlu48eu48(5), adlu52eu52(6), adlu56eu56(7), adlu60eu60(8), adlu64eu64(9), extended(10), standard(11), jj100(12) } SheAdslControlPSDMASKdsRequestResultType ::= INTEGER { noRequest(1), commandSucceeded(2), psdDataWrongType(30), psdDataWrongLength(31), missingStartTone(32), missingEndTone(33), outOfToneRange(34), duplicateTone(35), oufOfInputPSD(36), oufOfPsdLevel(37), psdModeNotSupport(38), outOfNomPSDRange(39), outOfAtpRange(40) } SheAdslLineActionType ::= INTEGER { startup(0), spectrumReverb(5), analogLb(6), digitalLb(7), atmLb(10), spectrumMedley(26), spectrumPilot(27), spectrumCMtpr(30), spectrumRMtpr(32), hybridLossTest(33), rcvLinearityTest(34), rcvFilterTest(35), rcvPowerPerBinTest(36), idleNoisePerBinTest(37), totalIdleNoiseTest(38) } SheAdslLineClockType ::= INTEGER { oscillator(0), crystal(4) } SheAdslAtuxCapabilityType ::= BITS { q9921GspanPlusPotsNonOverlapped(0), q9921GspanPlusPotsOverlapped(1), q9923Adsl2PotsOverlapped(2), q9923Adsl2PotsNonOverlapped(3), q9925Adsl2PlusPotsOverlapped(4), q9925Adsl2PlusPotsNonOverlapped(5), q9923ReAdsl2PotsNonOverlapped(8), q9923ReAdsl2PotsOverlapped(9), q9925Adsl2PlusIsdnAllDigitalOverlapped(10), q9923Adsl2IsdnAllDigitalNonOverlapped(11), q9923Adsl2IsdnAllDigitalOverlapped(12), adslPlusPotsOverlapped(13), q9925Adsl2PlusIsdnNonOverlapped(14), q9925Adsl2PlusIsdnOverlapped(15), q9923Adsl2IsdnNonOverlapped(16), q9923Adsl2IsdnOverlapped(17), adslPlusPotsNonOverlapped(18), q9921TcmIsdnSymmetric(19), q9922TcmIsdnOverlapped(20), q9922TcmIsdnNonOverlapped(21), q9922PotsOverlapped(22), q9922PotsNonOverlapped(23), q9921TcmIsdnOverlapped(24), q9921TcmIsdnNonOverlapped(25), q9921IsdnOverlapped(26), q9921IsdnNonOverlapped(27), q9921PotsOverlapped(28), q9921PotsNonOverlapped(29), etsi(30), t1413(31), q9925Adsl2PlusPotsExtendedUpstreamNonOverlapped(32), q9925Adsl2PlusPotsExtendedUpstreamOverlapped(33), q9925Adsl2PlusPotsAllDigitalOverlapped(38), q9925Adsl2PlusPotsAllDigitalNonOverlapped(39), q9925Adsl2PlusIsdnAllDigitalNonOverlapped(51), q9923Adsl2PotsAllDigitalNonOverlapped(52), q9923Adsl2PotsAllDigitalOverlapped(53), q9923Adsl2PotsExtendedUpstreamNonOverlapped(56), q9923Adsl2PotsExtendedUpstreamOverlapped(57) } SheAdslLineCurrentStatusType ::= INTEGER { noError(1), lossOfFraming(2), lossOfSignal(4), lossOfPower(8), lossOfSignalQuality(16), lossOfLink(32), dataInitFailure(64), configInitFailure(128), protocolInitFailure(256), noPeerAtuPresent(512) } SheAdslLineOpStateType ::= INTEGER { idle(0), data(1), bootUpLoad(8), handshake(16), training(24), framerSync(26), fastRetrainInProg(27), discovery(46), llTest(128), dlTest(131), txTest(132), atmLpTest(133), deltTraining(139), delt(140) } SheAdslAtucPhysBertSyncType ::= INTEGER { bertOutOfSync(0), bertInSync(128) } SheAdslPhysAtucDeltLastTxStateType ::= INTEGER { dmtatucg9941(0), dmtatucquiet1(1), dmtatuccomb1(2), dmtatucquiet2(3), dmtatuccomb2(4), dmtatucicomb1(5), dmtatuclineprob(6), dmtatucquiet3(7), dmtatuccomb3(8), dmtatucicomb2(9), dmtatucmsgfmt(10), dmtatucmsgpcb(11), dmtatucquiet4(12), dmtatucreverb1(13), dmtatuctref1(14), dmtatucreverb2(15), dmtatucect(16), dmtatucreverb3(17), dmtatuctref2(18), dmtatucreverb4(19), dmtatucsegue1(20), dmtatucmsg1(21), dmtatucreverb5(22), dmtatucsegue2(23), dmtatucmedley(24), dmtatucexchmarker(25), dmtatucmsg2(26), dmtatucreverb6(27), dmtatucsegue3(28), dmtatucparams(29), dmtatucreverb7(30), dmtatucsegue4(31), dmtatucshowtime(32) } SheAdslPhysAturDeltLastTxStateType ::= INTEGER { dmtaturg9941(0), dmtaturquiet1(1), dmtaturcomb1(2), dmtaturquiet2(3), dmtaturcomb2(4), dmtaturicomb1(5), dmtaturlineprob(6), dmtaturquiet3(7), dmtaturcomb3(8), dmtaturicomb2(9), dmtaturmsgfmt(10), dmtaturmsgpcb(11), dmtaturreverb1(12), dmtaturquiet4(13), dmtaturreverb2(14), dmtaturquiet5(15), dmtaturreverb3(16), dmtaturect(17), dmtaturreverb4(18), dmtatursegue1(19), dmtaturreverb5(20), dmtatursegue2(21), dmtaturmsg1(22), dmtaturmedley(23), dmtaturexchmarker(24), dmtaturmsg2(25), dmtaturreverb6(26), dmtatursegue3(27), dmtaturparams(28), dmtaturreverb7(29), dmtatursegue4(30), dmtaturshowtime(31) } -- -- SheAdslAtucPhysParametricTestResultType ::= INTEGER { ok(0), fail(1), dspIfFail(2) } SheAdslLineActStateType ::= INTEGER { noError(0), errPsdMaskds(1), errMaxNomPsdds(2), errMaxNomAtpds(3), errPsdMaskMaxBreakPoints(4), errPsdMode(5), errResultPsdMask(6), errPsdMaskConfig(7), warnG997PsdMaskConfig(8), warnG997PsdMaskConfigIndexOutOfRange(9), warnG997PsdMaskConfigLevelOutOfRange(10), warnG997PsdMaskConfigNoVaildBreakPoints(11), warnDevPsdMaskMaxBreakPoints(12), warnDevPsdMaskOufOfBandBreakPoints(13), warnDevPsdInternal(14), warnDevPsdMode(15) } SheAdslLineAtmStatus ::= INTEGER { noAtmDefect(0), noCellDeleniation(1), lossOfCellDeleniation(2) } SheAdslOamLevelType ::= INTEGER { undefined(0), f1(1), f2(2), f3(3), f4(4), f5(5) } SheAdslOamLoopTestType ::= INTEGER { none(0), segment(1), endToEnd(2) } SheAdslVccTpLoopTestResultType ::= INTEGER { segSuccess(0), segFailure(1), endToEndSuccess(2), endToEndFailure(3), aborted(4), progress(5), notAvailable(65535) } -- -- SheAdslAtmQosType ::= INTEGER { unshaped(0), shapingCbr(1), shapingRtVbr(2), shapingNrtVbr(3), shapingUbr(4) } SheAdslLineConfEnableSpecial1Type ::= INTEGER { enable(1), disable(32768) } SheAdslLineTransAtucCapType ::= BITS { ansit1413(0), etsi(1), q9921PotsNonOverlapped(2), q9921PotsOverlapped(3), q9921IsdnNonOverlapped(4), q9921IsdnOverlapped(5), q9921TcmIsdnNonOverlapped(6), q9921TcmIsdnOverlapped(7), q9922PotsNonOverlapped(8), q9922PotsOverlapped(9), q9922TcmIsdnNonOverlapped(10), q9922TcmIsdnOverlapped(11), q9922TcmIsdnSymmetric(12), adslPlusPotsNonOverlapped(13) } SheAdslEnableType ::= INTEGER { enable(1), disable(2) } -- L3 mode, no traffic -- L0 mode, line runs in normal power -- L2 mode, line runs in reduced power SheAdslPwrMgmtPMSFType ::= INTEGER { pmsfL3ToL0StateForce(0), pmsfL0ToL2StateForce(1), pmsfL3StateForce(2), pmsfL2ToL0StateForce(3) } SheAdslPwrMgmtStateType ::= INTEGER { idle(0), data(1), l2(141) } SheAdslPwrMgmtModeType ::= INTEGER { disable(0), l2Enabled(1), l2andl3Enabled(2) } SheAdslAtmEncapType ::= INTEGER { llc(1), vcMux(2) } -- -- Textual conventions -- SheAdslLineDeltConfLDSFType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "DELT-related parameter. Not available for ADSL but ADSL2 and ADSL2plus." SYNTAX INTEGER { inhibit(0), force(1) } SheAdslChannelType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The used adsl bearer channel type." SYNTAX INTEGER { interleaved(1), fast(2) } -- -- Node definitions -- -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1 sheAdslMibObjects OBJECT IDENTIFIER ::= { sheAdslMib 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1 sheAdslLineMIB OBJECT IDENTIFIER ::= { sheAdslMibObjects 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.1 -- THIS ELEMENT AND HIS CONTENT WILL NOT LONGER BE SUPPORTED BY NE up R2.5. sheDslSystemParamGroup OBJECT IDENTIFIER ::= { sheAdslLineMIB 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.1.1 sheDslSystemDslType OBJECT-TYPE SYNTAX SheDslSystemType MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the firmware to be downloaded. adsl(1), sdsl(2), shdsl(3) " ::= { sheDslSystemParamGroup 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.1.2 sheDslSystemLineCodingType OBJECT-TYPE SYNTAX SheDslSystemLineCodingType MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates ADSL line code type. other(1), dmt(2), cap(3), qam(4) " ::= { sheDslSystemParamGroup 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.1.3 sheDslSystemLineTxCfg OBJECT-TYPE SYNTAX SheDslSystemTxCfgType MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates transmission capabilities with which the DSL system is configured. unused(0), etsi(1), q9921PotsNonOverlapped(2), q9921PotsOverlapped(3), q9921IsdnNonOverlapped(4), q9921IsdnOverlapped(5), q9921TcmIsdnNonOverlapped(6), q9921TcmIsdnOverlapped(7), q9922PotsNonOverlapped(8), q9922PotsOverlapped(9), q9922TcmIsdnNonOverlapped(10), q9922TcmIsdnOverlapped(11), q9922TcmIsdnSymmetric(12), adslPlusPotsNonOverlapped(13) " ::= { sheDslSystemParamGroup 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.2 -- THIS ELEMENT AND HIS CONTENT WILL NOT LONGER BE SUPPORTED BY NE up R2.5. sheDslSystemParamControl OBJECT IDENTIFIER ::= { sheAdslLineMIB 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.2.1 sheDslSystemParamControlRequest OBJECT-TYPE SYNTAX SheAdslControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "setDslSystemLineTxCfg: sheDslSystemParamControlLineTxCfg" ::= { sheDslSystemParamControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.2.2 sheDslSystemParamControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. " ::= { sheDslSystemParamControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.2.3 sheDslSystemParamControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. " ::= { sheDslSystemParamControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.2.4 sheDslSystemParamControlReqResult OBJECT-TYPE SYNTAX SheAdslControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheDslSystemParamControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.2.5 sheDslSystemParamControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheDslSystemParamControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.2.6 sheDslSystemParamControlLineTxCfg OBJECT-TYPE SYNTAX SheDslSystemTxCfgType MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates transmission capabilities with which the DSL system is configured." ::= { sheDslSystemParamControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.3 -- THIS ELEMENT AND HIS CONTENT WILL NOT LONGER BE SUPPORTED BY NE up R2.5. sheAdslSystemCapabilityGroup OBJECT IDENTIFIER ::= { sheAdslLineMIB 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.3.1 sheAdslCapabilityLineTxCap OBJECT-TYPE SYNTAX SheDslSystemTxCfgType MAX-ACCESS read-only STATUS current DESCRIPTION "This bitmap specifies all transmission modes, which the ATU-C is capable of supporting. Right now support for Annex A (q9921PotsNonOverlapped(2) and q9921PotsOverlapped(3)) is present. This value depends on the DSL PHY firmware present on Columbia MND unused(0), etsi(1), q9921PotsNonOverlapped(2), q9921PotsOverlapped(3), q9921IsdnNonOverlapped(4), q9921IsdnOverlapped(5), q9921TcmIsdnNonOverlapped(6), q9921TcmIsdnOverlapped(7), q9922PotsNonOverlapped(8), q9922PotsOverlapped(9), q9922TcmIsdnNonOverlapped(10), q9922TcmIsdnOverlapped(11), q9922TcmIsdnSymmetric(12), adslPlusPotsNonOverlapped(13) " ::= { sheAdslSystemCapabilityGroup 1 } -- Profile Group -- -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.4 sheAdslLineConfProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF SheAdslLineConfProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information on the ADSL line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure the ADSL line." ::= { sheAdslLineMIB 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.4.1 sheAdslLineConfProfileEntry OBJECT-TYPE SYNTAX SheAdslLineConfProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry consists of a list of parameters that represents the configuration of an ADSL modem. `Dynamic' profiles are implemented. A default profile will always exist. This profile's name will be set to `DEFVAL' and its parameters will be set to vendor specific values, unless otherwise specified in this document. " INDEX { sheAdslLineConfProfileIndex } ::= { sheAdslLineConfProfileTable 1 } SheAdslLineConfProfileEntry ::= SEQUENCE { sheAdslLineConfProfileIndex Integer32, sheAdslLineConfProfileName SnmpAdminString, sheAdslLineConfProfileAtucConfRateMode SheAdslLineConfRateModeType, sheAdslLineConfProfileAtucConfRateChanRatio INTEGER, sheAdslLineConfProfileAtucConfTargetSnrMgn INTEGER, sheAdslLineConfProfileAtucConfMaxSnrMgn INTEGER, sheAdslLineConfProfileAtucConfMinSnrMgn INTEGER, sheAdslLineConfProfileAtucConfDownshiftSnrMgn INTEGER, sheAdslLineConfProfileAtucConfUpshiftSnrMgn INTEGER, sheAdslLineConfProfileAtucConfMinUpshiftTime INTEGER, sheAdslLineConfProfileAtucConfMinDownshiftTime INTEGER, sheAdslLineConfProfileAtucChanConfFastMinTxRate Unsigned32, sheAdslLineConfProfileAtucChanConfInterleaveMinTxRate Unsigned32, sheAdslLineConfProfileAtucChanConfFastMaxTxRate Unsigned32, sheAdslLineConfProfileAtucChanConfInterleaveMaxTxRate Unsigned32, sheAdslLineConfProfileAtucChanConfMaxInterleaveDelay INTEGER, sheAdslLineConfProfileAturConfRateMode SheAdslLineConfRateModeType, sheAdslLineConfProfileAturConfRateChanRatio INTEGER, sheAdslLineConfProfileAturConfTargetSnrMgn INTEGER, sheAdslLineConfProfileAturConfMaxSnrMgn INTEGER, sheAdslLineConfProfileAturConfMinSnrMgn INTEGER, sheAdslLineConfProfileAturConfDownshiftSnrMgn INTEGER, sheAdslLineConfProfileAturConfUpshiftSnrMgn INTEGER, sheAdslLineConfProfileAturConfMinUpshiftTime INTEGER, sheAdslLineConfProfileAturConfMinDownshiftTime INTEGER, sheAdslLineConfProfileAturChanConfFastMinTxRate Unsigned32, sheAdslLineConfProfileAturChanConfInterleaveMinTxRate Unsigned32, sheAdslLineConfProfileAturChanConfFastMaxTxRate Unsigned32, sheAdslLineConfProfileAturChanConfInterleaveMaxTxRate Unsigned32, sheAdslLineConfProfileAturChanConfMaxInterleaveDelay INTEGER, sheAdslLineConfProfileTrellis SheAdslLineTrellisModeType, sheAdslLineConfProfileAtucConfPwrMgmtL0Time INTEGER, sheAdslLineConfProfileAtucConfPwrMgmtL2Time INTEGER, sheAdslLineConfProfileAtucConfPwrMgmtL2ATPR INTEGER, sheAdslLineConfProfileAtucConfPwrMgmtL2Rate INTEGER, sheAdslLineConfProfileAtucConfPwrMgmtMode SheAdslPwrMgmtModeType } -- -- -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.4.1.1 sheAdslLineConfProfileIndex OBJECT-TYPE SYNTAX Integer32 (1..300) MAX-ACCESS read-only STATUS current DESCRIPTION "The table index." ::= { sheAdslLineConfProfileEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.4.1.2 sheAdslLineConfProfileName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used by the line configuration table in order to identify a row of this table. Dynamic profiles are implemented. The profile name is user specified. Also, the system will always provide a default profile whose name is `DEFVAL' for Annex A and DEFVAL_ISDN fpr Annex B card's (both Adsl2+). Special characters are not allowed, like: space : ? " ::= { sheAdslLineConfProfileEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.4.1.3 sheAdslLineConfProfileAtucConfRateMode OBJECT-TYPE SYNTAX SheAdslLineConfRateModeType MAX-ACCESS read-only STATUS current DESCRIPTION "Defines what form of transmit rate adaptation is configured on this modem. See ADSL Forum TR-005 [3] for more information. fixed(1), adaptAtStartup(2), adaptAtRuntime(3) " ::= { sheAdslLineConfProfileEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.4.1.4 sheAdslLineConfProfileAtucConfRateChanRatio OBJECT-TYPE SYNTAX INTEGER (0..100) UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "Configured allocation ratio of excess transmit bandwidth between fast and interleaved channels. Only applies when two channel mode and rate adaptive DSL are supported. A ratio of 20% means, that 20 % of the available data rate (in access of the minimum rate summend over all bearer channels) will be assigned to the fast channel and 80% to the interleaved channel. Only valid if sheAdslLineConfExtnProfileLineType is set to dualLatency mode." REFERENCE "G997.1 chapter 7.3.2.1.4" DEFVAL { 0 } ::= { sheAdslLineConfProfileEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.4.1.5 sheAdslLineConfProfileAtucConfTargetSnrMgn OBJECT-TYPE SYNTAX INTEGER (0..310) UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization." DEFVAL { 60 } ::= { sheAdslLineConfProfileEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.4.1.6 sheAdslLineConfProfileAtucConfMaxSnrMgn OBJECT-TYPE SYNTAX INTEGER (0..310) UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Configured Maximum acceptable Signal/Noise Margin. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operation." DEFVAL { 310 } ::= { sheAdslLineConfProfileEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.4.1.7 sheAdslLineConfProfileAtucConfMinSnrMgn OBJECT-TYPE SYNTAX INTEGER (0..310) UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Configured Minimum acceptable Signal/Noise Margin. If the noise margin falls below this level, the modem should attempt to increase its power output. If that is not possible the modem will attempt to re-initialize or shut down." DEFVAL { 0 } ::= { sheAdslLineConfProfileEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.4.1.8 sheAdslLineConfProfileAtucConfDownshiftSnrMgn OBJECT-TYPE SYNTAX INTEGER (0..310) UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Configured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrease its transmit rate. In the case that adaptAtRuntime mode is not present, the value will be 'don't care'." DEFVAL { 30 } ::= { sheAdslLineConfProfileEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.4.1.9 sheAdslLineConfProfileAtucConfUpshiftSnrMgn OBJECT-TYPE SYNTAX INTEGER (0..310) UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Configured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase its transmit rate. In the case that adaptAtRuntime mode is not present, the value will be 'don't care'." DEFVAL { 120 } ::= { sheAdslLineConfProfileEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.4.1.10 sheAdslLineConfProfileAtucConfMinUpshiftTime OBJECT-TYPE SYNTAX INTEGER (0..16383) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum time that the current margin is above UpshiftSnrMgn before an upshift occurs. In the case that adaptAtRuntime mode is not present, the value will be 'don't care'." ::= { sheAdslLineConfProfileEntry 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.4.1.11 sheAdslLineConfProfileAtucConfMinDownshiftTime OBJECT-TYPE SYNTAX INTEGER (0..16383) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum time that the current margin is below DownshiftSnrMgn before a downshift occurs. In the case that adaptAtRuntime mode is not present, the value will be 'don't care'." ::= { sheAdslLineConfProfileEntry 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.4.1.12 sheAdslLineConfProfileAtucChanConfFastMinTxRate OBJECT-TYPE SYNTAX Unsigned32 (32..32736) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Configured Minimum Transmit rate for `Fast' channels, in kbps. See adslAtucConfRateChanRatio for information regarding RADSL mode and ATUR transmit rate for ATUC receive rates. Only multiples of 32 will be configured. " REFERENCE "G997.1 chapter 7.3.2.1.1 / 7.3.2.1.2" ::= { sheAdslLineConfProfileEntry 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.4.1.13 sheAdslLineConfProfileAtucChanConfInterleaveMinTxRate OBJECT-TYPE SYNTAX Unsigned32 (32..32736) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Configured Minimum Transmit rate for `Interleave' channels, in kbps. See adslAtucConfRateChanRatio for information regarding RADSL mode and see ATUR transmit rate for receive rates. Only multiples of 32 will be configured." REFERENCE "G997.1 chapter 7.3.2.1.1 / 7.3.2.1.2" ::= { sheAdslLineConfProfileEntry 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.4.1.14 sheAdslLineConfProfileAtucChanConfFastMaxTxRate OBJECT-TYPE SYNTAX Unsigned32 (32..32736) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Configured Maximum Transmit rate for `Fast' channels, in kbps. See adslAtucConfRateChanRatio for information regarding RADSL mode and see ATUR transmit rate for ATUC receive rates. Only multiples of 32 will be configured." REFERENCE "G997.1 chapter 7.3.2.1.3" ::= { sheAdslLineConfProfileEntry 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.4.1.15 sheAdslLineConfProfileAtucChanConfInterleaveMaxTxRate OBJECT-TYPE SYNTAX Unsigned32 (32..32736) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Configured Maximum Transmit rate for `Interleave' channels, in kbps. See adslAtucConfRateChanRatio for information regarding RADSL mode and ATUR transmit rate for ATUC receive rates. Only multiples of 32 will be configured." REFERENCE "G997.1 chapter 7.3.2.1.3" ::= { sheAdslLineConfProfileEntry 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.4.1.16 sheAdslLineConfProfileAtucChanConfMaxInterleaveDelay OBJECT-TYPE SYNTAX INTEGER (1..63) UNITS "milli-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Configured maximum Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. Larger numbers provide greater separation between consecutive input bytes in the output bit stream allowing for improved impulse noise immunity at the expense of payload latency." ::= { sheAdslLineConfProfileEntry 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.4.1.17 sheAdslLineConfProfileAturConfRateMode OBJECT-TYPE SYNTAX SheAdslLineConfRateModeType MAX-ACCESS read-only STATUS current DESCRIPTION "Defines what form of transmit rate adaptation is configured on this modem. See ADSL Forum TR-005 [3] for more information. fixed(1), adaptAtStartup(2), adaptAtRuntime(3) " ::= { sheAdslLineConfProfileEntry 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.4.1.18 sheAdslLineConfProfileAturConfRateChanRatio OBJECT-TYPE SYNTAX INTEGER (0..100) UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "Configured allocation ratio of excess transmit bandwidth between fast and interleaved channels. Only applies when two channel mode and rate adaptive DSL are supported. A ratio of 20% means, that 20 % of the available data rate (in access of the minimum rate summend over all bearer channels) will be assigned to the fast channel and 80% to the interleaved channel. Only valid if sheAdslLineConfExtnProfileLineType is set to dualLatency mode." DEFVAL { 0 } ::= { sheAdslLineConfProfileEntry 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.4.1.19 sheAdslLineConfProfileAturConfTargetSnrMgn OBJECT-TYPE SYNTAX INTEGER (0..310) UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization." DEFVAL { 60 } ::= { sheAdslLineConfProfileEntry 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.4.1.20 sheAdslLineConfProfileAturConfMaxSnrMgn OBJECT-TYPE SYNTAX INTEGER (0..310) UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Configured Maximum acceptable Signal/Noise Margin. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operation." DEFVAL { 310 } ::= { sheAdslLineConfProfileEntry 20 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.4.1.21 sheAdslLineConfProfileAturConfMinSnrMgn OBJECT-TYPE SYNTAX INTEGER (0..310) UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Configured Minimum acceptable Signal/Noise Margin. If the noise margin falls below this level, the modem should attempt to increase its power output. If that is not possible the modem will attempt to re-initialize or shut down." DEFVAL { 0 } ::= { sheAdslLineConfProfileEntry 21 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.4.1.22 sheAdslLineConfProfileAturConfDownshiftSnrMgn OBJECT-TYPE SYNTAX INTEGER (0..310) UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Configured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrease its transmit rate. In the case that adaptAtRuntime mode is not present, the value will be 'don't care'." DEFVAL { 30 } ::= { sheAdslLineConfProfileEntry 22 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.4.1.23 sheAdslLineConfProfileAturConfUpshiftSnrMgn OBJECT-TYPE SYNTAX INTEGER (0..310) UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Configured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase its transmit rate. In the case that adaptAtRuntime mode is not present, the value will be 'don't care'." DEFVAL { 120 } ::= { sheAdslLineConfProfileEntry 23 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.4.1.24 sheAdslLineConfProfileAturConfMinUpshiftTime OBJECT-TYPE SYNTAX INTEGER (0..16383) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum time that the current margin is above UpshiftSnrMgn before an upshift occurs. In the case that adaptAtRuntime mode is not present, the value will be 'don't care'." ::= { sheAdslLineConfProfileEntry 24 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.4.1.25 sheAdslLineConfProfileAturConfMinDownshiftTime OBJECT-TYPE SYNTAX INTEGER (0..16383) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum time that the current margin is below DownshiftSnrMgn before a downshift occurs. In the case that adaptAtRuntime mode is not present, the value will be 'don't care'." ::= { sheAdslLineConfProfileEntry 25 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.4.1.26 sheAdslLineConfProfileAturChanConfFastMinTxRate OBJECT-TYPE SYNTAX Unsigned32 (32..3520) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Configured Minimum Transmit rate for `Fast' channels, in kbps. See adslAturConfRateChanRatio for information regarding RADSL mode and ATUC transmit rate for ATUR receive rates. Only multiples of 32 will be configured." REFERENCE "G997.1 chapter 7.3.2.1.1 / 7.3.2.1.2" ::= { sheAdslLineConfProfileEntry 26 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.4.1.27 sheAdslLineConfProfileAturChanConfInterleaveMinTxRate OBJECT-TYPE SYNTAX Unsigned32 (32..3520) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Configured Minimum Transmit rate for `Interleave' channels, in kbps. See adslAturConfRateChanRatio for information regarding RADSL mode and ATUC transmit rate for ATUR receive rates. Only multiples of 32 will be configured." REFERENCE "G997.1 chapter 7.3.2.1.1 / 7.3.2.1.2" ::= { sheAdslLineConfProfileEntry 27 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.4.1.28 sheAdslLineConfProfileAturChanConfFastMaxTxRate OBJECT-TYPE SYNTAX Unsigned32 (32..3520) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Configured Maximum Transmit rate for `Fast' channels, in kbps. See adslAturConfRateChanRatio for information regarding RADSL mode and ATUC transmit rate for ATUR receive rates. Only multiples of 32 will be configured." REFERENCE "G997.1 chapter 7.3.2.1.3" ::= { sheAdslLineConfProfileEntry 28 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.4.1.29 sheAdslLineConfProfileAturChanConfInterleaveMaxTxRate OBJECT-TYPE SYNTAX Unsigned32 (32..3520) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Configured Maximum Transmit rate for `Interleave' channels, in kbps. See adslAturConfRateChanRatio for information regarding RADSL mode and see ATUC transmit rate for ATUR receive rates. Only multiples of 32 will be configured." REFERENCE "G997.1 chapter 7.3.2.1.3" ::= { sheAdslLineConfProfileEntry 29 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.4.1.30 sheAdslLineConfProfileAturChanConfMaxInterleaveDelay OBJECT-TYPE SYNTAX INTEGER (1..63) UNITS "milli-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Configured maximum Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. Larger numbers provide greater separation between consecutive input bytes in the output bit stream allowing for improved impulse noise immunity at the expense of payload latency." ::= { sheAdslLineConfProfileEntry 30 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.4.1.31 sheAdslLineConfProfileTrellis OBJECT-TYPE SYNTAX SheAdslLineTrellisModeType MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if Trelliscoding is enabled or not. If TrellisCoding is used is indicated in sheAdslLineTable and depence also on the Atur-Capabilities. The NE will not accept setting trellisOff. It is automatically controlled by firmware and will be switched off if ATU-R will not support this." DEFVAL { 1 } ::= { sheAdslLineConfProfileEntry 31 } sheAdslLineConfProfileAtucConfPwrMgmtL0Time OBJECT-TYPE SYNTAX INTEGER (0..255) UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter represents the minimum time (in seconds) between an exit from the L2 state and the next entry into the L2 state. It ranges from 0 to 255 seconds. Only valid for Adsl2 and Adsl2Plus." REFERENCE "G997.1 chapter 7.3.1.1.5" ::= { sheAdslLineConfProfileEntry 32 } sheAdslLineConfProfileAtucConfPwrMgmtL2Time OBJECT-TYPE SYNTAX INTEGER (0..255) UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter represents the minimum time (in seconds) between an Entry into the L2 state and the first Power Trim in the L2 state and between two consecutive Power Trims in the L2 State. It ranges from 0 to 255 seconds. Only valid for Adsl2 and Adsl2Plus." REFERENCE "G997.1 chapter 7.3.1.1.6" ::= { sheAdslLineConfProfileEntry 33 } sheAdslLineConfProfileAtucConfPwrMgmtL2ATPR OBJECT-TYPE SYNTAX INTEGER (0..310) UNITS "dB/10" MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter represents the maximum aggregate transmit power reduction (in dB) that can be performed through a single Power Trim in the L2 state. It ranges from 0 dB/10 to 310 dB/10. Only valid for Adsl2 and Adsl2Plus." REFERENCE "G997.1 chapter 7.3.1.1.7" ::= { sheAdslLineConfProfileEntry 34 } sheAdslLineConfProfileAtucConfPwrMgmtL2Rate OBJECT-TYPE SYNTAX INTEGER (8000..1024000) UNITS "bit/s" MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter specifies the minimum net data rate during the low power state (L2). The data rate is coded in bit/s, and can range from 0x1F40 (8000) bps to 0xFA000 (1024000) bps. Only valid for Adsl2 and Adsl2Plus." ::= { sheAdslLineConfProfileEntry 35 } sheAdslLineConfProfileAtucConfPwrMgmtMode OBJECT-TYPE SYNTAX SheAdslPwrMgmtModeType MAX-ACCESS read-only STATUS current DESCRIPTION "Which ADSL Power Management state is enabled. Only valid for Adsl2 and Adsl2Plus." REFERENCE "G997.1 chapter 7.3.1.1.4" ::= { sheAdslLineConfProfileEntry 36 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5 sheAdslLineConfProfileControl OBJECT IDENTIFIER ::= { sheAdslLineMIB 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.1 sheAdslLineConfProfileControlRequest OBJECT-TYPE SYNTAX SheAdslControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "The different Controltypes for profile creation could be used to select predefined values for the supported standard. createAdslLineConfProfile (Adsl2PlusAnnexA) createAdslLineConfProfileAnnexA createAdslLineConfProfileAnnexB createAdslLineConfProfileAdsl2PlusAnnexB createAdslLineConfProfileAdsl2AnnexI createAdslLineConfProfileAdsl2AnnexJ createAdslLineConfProfileAdsl2PlusAnnexI createAdslLineConfProfileAdsl2PlusAnnexJ createAdslLineConfProfileAdsl2AnnexM createAdslLineConfProfileAdsl2PlusAnnexM sheAdslLineConfProfileControlName ... modifyAdslLineConfProfile sheAdslLineConfProfileControlIndex sheAdslLineConfProfileControlName ... deleteAdslLineConfProfile sheAdslLineConfProfileControlIndex sheAdslLineConfProfileControlName New with R2.8: createAdslLineConfProfileAdsl2PlusDynamic sheAdslLineConfProfileControlName" ::= { sheAdslLineConfProfileControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.2 sheAdslLineConfProfileControlIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Index of the configured table-entry. Needed for modify or delete." ::= { sheAdslLineConfProfileControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.3 sheAdslLineConfProfileControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. " ::= { sheAdslLineConfProfileControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.4 sheAdslLineConfProfileControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. " ::= { sheAdslLineConfProfileControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.5 sheAdslLineConfProfileControlReqResult OBJECT-TYPE SYNTAX SheAdslControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheAdslLineConfProfileControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.6 sheAdslLineConfProfileControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheAdslLineConfProfileControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.7 sheAdslLineConfProfileControlName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "Descriptional name." ::= { sheAdslLineConfProfileControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.8 sheAdslLineConfProfileControlAtucConfRateMode OBJECT-TYPE SYNTAX SheAdslLineConfRateModeType MAX-ACCESS read-write STATUS current DESCRIPTION "Defines what form of transmit rate adaptation is configured on this modem. See ADSL Forum TR-005 [3] for more information." ::= { sheAdslLineConfProfileControl 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.9 sheAdslLineConfProfileControlAtucConfRateChanRatio OBJECT-TYPE SYNTAX INTEGER (0..100) UNITS "%" MAX-ACCESS read-write STATUS current DESCRIPTION "Configured allocation ratio of excess transmit bandwidth between fast and interleaved channels. Only applies when two channel mode and rate adaptive DSL are supported. A ratio of 20% means, that 20 % of the available data rate (in access of the minimum rate summend over all bearer channels) will be assigned to the fast channel and 80% to the interleaved channel. Only valid if sheAdslLineConfExtnProfileLineType is set to dualLatency mode." ::= { sheAdslLineConfProfileControl 9 } -- -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.10 sheAdslLineConfProfileControlAtucConfTargetSnrMgn OBJECT-TYPE SYNTAX INTEGER (0..310) UNITS "tenth dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization." ::= { sheAdslLineConfProfileControl 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.11 sheAdslLineConfProfileControlAtucConfMaxSnrMgn OBJECT-TYPE SYNTAX INTEGER (0..310) UNITS "tenth dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Configured Maximum acceptable Signal/Noise Margin. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operation." ::= { sheAdslLineConfProfileControl 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.12 sheAdslLineConfProfileControlAtucConfMinSnrMgn OBJECT-TYPE SYNTAX INTEGER (0..310) UNITS "tenth dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Configured Minimum acceptable Signal/Noise Margin. If the noise margin falls below this level, the modem should attempt to increase its power output. If that is not possible the modem will attempt to re-initialize or shut down." ::= { sheAdslLineConfProfileControl 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.13 sheAdslLineConfProfileControlAtucConfDownshiftSnrMgn OBJECT-TYPE SYNTAX INTEGER (0..310) UNITS "tenth dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Configured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrease its transmit rate. In the case that RADSL mode is not present, the value will be `0'." ::= { sheAdslLineConfProfileControl 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.14 sheAdslLineConfProfileControlAtucConfUpshiftSnrMgn OBJECT-TYPE SYNTAX INTEGER (0..310) UNITS "tenth dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Configured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase its transmit rate. In the case that RADSL is not present, the value will be `0'." ::= { sheAdslLineConfProfileControl 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.15 sheAdslLineConfProfileControlAtucConfMinUpshiftTime OBJECT-TYPE SYNTAX INTEGER (0..16383) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum time that the current margin is above UpshiftSnrMgn before an upshift occurs. In the case that RADSL is not present, the value will be `0'." ::= { sheAdslLineConfProfileControl 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.16 sheAdslLineConfProfileControlAtucConfMinDownshiftTime OBJECT-TYPE SYNTAX INTEGER (0..16383) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum time that the current margin is below DownshiftSnrMgn before a downshift occurs. In the case that RADSL mode is not present, the value will be `0'." ::= { sheAdslLineConfProfileControl 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.17 sheAdslLineConfProfileControlAtucChanConfFastMinTxRate OBJECT-TYPE SYNTAX Unsigned32 (0..32736) UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "Configured Minimum Transmit rate for `Fast' channels, in kbps. See adslAtucConfRateChanRatio for information regarding RADSL mode and ATUR transmit rate for ATUC receive rates. Only multiples of 32 will be configured." ::= { sheAdslLineConfProfileControl 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.18 sheAdslLineConfProfileControlAtucChanConfInterleaveMinTxRate OBJECT-TYPE SYNTAX Unsigned32 (0..32736) UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "Configured Minimum Transmit rate for `Interleave' channels, in kbps. See adslAtucConfRateChanRatio for information regarding RADSL mode and see ATUR transmit rate for receive rates. Only multiples of 32 will be configured." ::= { sheAdslLineConfProfileControl 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.19 sheAdslLineConfProfileControlAtucChanConfFastMaxTxRate OBJECT-TYPE SYNTAX Unsigned32 (32..32736) UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "Configured Maximum Transmit rate for `Fast' channels, in kbps. See adslAtucConfRateChanRatio for information regarding RADSL mode and see ATUR transmit rate for ATUC receive rates. Only multiples of 32 will be configured." ::= { sheAdslLineConfProfileControl 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.20 sheAdslLineConfProfileControlAtucChanConfInterleaveMaxTxRate OBJECT-TYPE SYNTAX Unsigned32 (32..32736) UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "Configured Maximum Transmit rate for `Interleave' channels, in kbps. See adslAtucConfRateChanRatio for information regarding RADSL mode and ATUR transmit rate for ATUC receive rates. Only multiples of 32 will be configured." ::= { sheAdslLineConfProfileControl 20 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.21 sheAdslLineConfProfileControlAtucChanConfMaxInterleaveDelay OBJECT-TYPE SYNTAX INTEGER (0..255) UNITS "milli-seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Configured maximum Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. Larger numbers provide greater separation between consecutive input bytes in the output bit stream allowing for improved impulse noise immunity at the expense of payload latency." ::= { sheAdslLineConfProfileControl 21 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.22 sheAdslLineConfProfileControlAturConfRateMode OBJECT-TYPE SYNTAX SheAdslLineConfRateModeType MAX-ACCESS read-write STATUS current DESCRIPTION "Defines what form of transmit rate adaptation is configured on this modem. See ADSL Forum TR-005 [3] for more information." ::= { sheAdslLineConfProfileControl 22 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.23 sheAdslLineConfProfileControlAturConfRateChanRatio OBJECT-TYPE SYNTAX INTEGER (0..100) UNITS "%" MAX-ACCESS read-write STATUS current DESCRIPTION "Configured allocation ratio of excess transmit bandwidth between fast and interleaved channels. Only applies when two channel mode and rate adaptive DSL are supported. A ratio of 20% means, that 20 % of the available data rate (in access of the minimum rate summend over all bearer channels) will be assigned to the fast channel and 80% to the interleaved channel. Only valid if sheAdslLineConfExtnProfileLineType is set to dualLatency mode." ::= { sheAdslLineConfProfileControl 23 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.24 sheAdslLineConfProfileControlAturConfTargetSnrMgn OBJECT-TYPE SYNTAX INTEGER (0..310) UNITS "tenth dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization." ::= { sheAdslLineConfProfileControl 24 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.25 sheAdslLineConfProfileControlAturConfMaxSnrMgn OBJECT-TYPE SYNTAX INTEGER (0..310) UNITS "tenth dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Configured Maximum acceptable Signal/Noise Margin. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operation." ::= { sheAdslLineConfProfileControl 25 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.26 sheAdslLineConfProfileControlAturConfMinSnrMgn OBJECT-TYPE SYNTAX INTEGER (0..310) UNITS "tenth dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Configured Minimum acceptable Signal/Noise Margin. If the noise margin falls below this level, the modem should attempt to increase its power output. If that is not possible the modem will attempt to re-initialize or shut down." ::= { sheAdslLineConfProfileControl 26 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.27 sheAdslLineConfProfileControlAturConfDownshiftSnrMgn OBJECT-TYPE SYNTAX INTEGER (0..310) UNITS "tenth dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Configured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrease its transmit rate. In the case that RADSL mode is not present, the value will be `0'." ::= { sheAdslLineConfProfileControl 27 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.28 sheAdslLineConfProfileControlAturConfUpshiftSnrMgn OBJECT-TYPE SYNTAX INTEGER (0..310) UNITS "tenth dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Configured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase its transmit rate. In the case that RADSL is not present, the value will be `0'." ::= { sheAdslLineConfProfileControl 28 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.29 sheAdslLineConfProfileControlAturConfMinUpshiftTime OBJECT-TYPE SYNTAX INTEGER (0..16383) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum time that the current margin is above UpshiftSnrMgn before an upshift occurs. In the case that RADSL is not present, the value will be `0'." ::= { sheAdslLineConfProfileControl 29 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.30 sheAdslLineConfProfileControlAturConfMinDownshiftTime OBJECT-TYPE SYNTAX INTEGER (0..16383) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum time that the current margin is below DownshiftSnrMgn before a downshift occurs. In the case that RADSL mode is not present, the value will be `0'." ::= { sheAdslLineConfProfileControl 30 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.31 sheAdslLineConfProfileControlAturChanConfFastMinTxRate OBJECT-TYPE SYNTAX Unsigned32 (0..3520) UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "Configured Minimum Transmit rate for `Fast' channels, in kbps. See adslAturConfRateChanRatio for information regarding RADSL mode and ATUC transmit rate for ATUR receive rates. Only multiples of 32 will be configured." ::= { sheAdslLineConfProfileControl 31 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.32 sheAdslLineConfProfileControlAturChanConfInterleaveMinTxRate OBJECT-TYPE SYNTAX Unsigned32 (0..3520) UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "Configured Minimum Transmit rate for `Interleave' channels, in kbps. See adslAturConfRateChanRatio for information regarding RADSL mode and ATUC transmit rate for ATUR receive rates. Only multiples of 32 will be configured." ::= { sheAdslLineConfProfileControl 32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.33 sheAdslLineConfProfileControlAturChanConfFastMaxTxRate OBJECT-TYPE SYNTAX Unsigned32 (32..3520) UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "Configured Maximum Transmit rate for `Fast' channels, in kbps. See adslAturConfRateChanRatio for information regarding RADSL mode and ATUC transmit rate for ATUR receive rates. Only multiples of 32 will be configured." ::= { sheAdslLineConfProfileControl 33 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.34 sheAdslLineConfProfileControlAturChanConfInterleaveMaxTxRate OBJECT-TYPE SYNTAX Unsigned32 (32..3520) UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "Configured Maximum Transmit rate for `Interleave' channels, in kbps. See adslAturConfRateChanRatio for information regarding RADSL mode and see ATUC transmit rate for ATUR receive rates. Only multiples of 32 will be configured." ::= { sheAdslLineConfProfileControl 34 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.35 sheAdslLineConfProfileControlAturChanConfMaxInterleaveDelay OBJECT-TYPE SYNTAX INTEGER (0..255) UNITS "milli-seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Configured maximum Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. Larger numbers provide greater separation between consecutive input bytes in the output bit stream allowing for improved impulse noise immunity at the expense of payload latency." ::= { sheAdslLineConfProfileControl 35 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.5.36 sheAdslLineConfProfileControlTrellis OBJECT-TYPE SYNTAX SheAdslLineTrellisModeType MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates if Trelliscoding is enabled or not. If TrellisCoding is used is indicated in sheAdslLineTable and depence also on the Atur-Capabilities. Do not touch!" ::= { sheAdslLineConfProfileControl 36 } sheAdslLineConfProfileControlAtucConfPwrMgmtL0Time OBJECT-TYPE SYNTAX INTEGER (0..255) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter represents the minimum time (in seconds) between an exit from the L2 state and the next entry into the L2 state. It ranges from 0 to 255 seconds. Only valid for Adsl2 and Adsl2Plus." ::= { sheAdslLineConfProfileControl 37 } sheAdslLineConfProfileControlAtucConfPwrMgmtL2Time OBJECT-TYPE SYNTAX INTEGER (0..255) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter represents the minimum time (in seconds) between an Entry into the L2 state and the first Power Trim in the L2 state and between two consecutive Power Trims in the L2 State. It ranges from 0 to 255 seconds. Only valid for Adsl2 and Adsl2Plus." ::= { sheAdslLineConfProfileControl 38 } sheAdslLineConfProfileControlAtucConfPwrMgmtL2ATPR OBJECT-TYPE SYNTAX INTEGER (0..310) UNITS "dB/10" MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter represents the maximum aggregate transmit power reduction (in dB) that can be performed through a single Power Trim in the L2 state. It ranges from 0 dB/10 to 310 dB/10. Only valid for Adsl2 and Adsl2Plus." ::= { sheAdslLineConfProfileControl 39 } sheAdslLineConfProfileControlAtucConfPwrMgmtL2Rate OBJECT-TYPE SYNTAX INTEGER (8000..1024000) UNITS "bit/s" MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter specifies the minimum net data rate during the low power state (L2). The data rate is coded in bit/s, and can range from 0x1F40 (8000) bps to 0xFA000 (1024000) bps. Only valid for Adsl2 and Adsl2Plus." ::= { sheAdslLineConfProfileControl 40 } sheAdslLineConfProfileControlAtucConfPwrMgmtMode OBJECT-TYPE SYNTAX SheAdslPwrMgmtModeType MAX-ACCESS read-write STATUS current DESCRIPTION "Which ADSL Power Management state is enabled. Only valid for Adsl2 and Adsl2Plus." ::= { sheAdslLineConfProfileControl 41 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6 sheAdslLineConfExtnProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF SheAdslLineConfExtnProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information on the ADSL line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure the ADSL line." ::= { sheAdslLineMIB 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1 sheAdslLineConfExtnProfileEntry OBJECT-TYPE SYNTAX SheAdslLineConfExtnProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry consists of a list of parameters that represents the configuration of an ADSL modem. The index is used from the sheAdslLineConfProfileTable. " INDEX { sheAdslLineConfProfileIndex } ::= { sheAdslLineConfExtnProfileTable 1 } SheAdslLineConfExtnProfileEntry ::= SEQUENCE { sheAdslLineConfExtnProfileParametricTestInputFile DisplayString, sheAdslLineConfExtnProfileRsIntCorrectionUp SheAdslLineConfRsIntCorrectionType, sheAdslLineConfExtnProfileLineType SheAdslConfLineType, sheAdslLineConfExtnProfileTxEndBin INTEGER, sheAdslLineConfExtnProfileTxStartBin INTEGER, sheAdslLineConfExtnProfileMaxBitsPerBin INTEGER, sheAdslLineConfExtnProfileRxStartBin INTEGER, sheAdslLineConfExtnProfileRxEndBin INTEGER, sheAdslLineConfExtnProfileRxBinAdjust SheAdslLineConfExtnProfileRxBinAdjustType, sheAdslLineConfExtnProfileTriggerMode SheAdslLineConfTriggerModeType, sheAdslLineConfExtnProfileAdi2x SheAdslLineConfExtnProfileAdi2xType, sheAdslLineConfExtnProfileStandard SheAdslLineConfStandardType, sheAdslLineConfExtnProfileInitiate SheAdslLineConfInitiateType, sheAdslLineConfExtnProfileTxPowerAttenuation SheAdslLineConfAttenuationType, sheAdslLineConfExtnProfileCodingGain SheAdslLineConfGainType, sheAdslLineConfExtnProfileRsFastOvrhdDown SheAdslLineConfRsFastOvrhdType, sheAdslLineConfExtnProfileIntCorrectionDown SheAdslLineConfRsIntCorrectionType, sheAdslLineConfExtnProfileRsFastOvrhdUp SheAdslLineConfRsFastOvrhdType, sheAdslLineConfExtnProfileDrStby SheAdslLineConfEnableType, sheAdslLineConfExtnProfileExpandedExchange SheAdslLineConfExpandedExchangeType, sheAdslLineConfExtnProfileEscapeFastRetrainEnable SheAdslLineConfEnableType, sheAdslLineConfExtnProfileFastRetrainEnable SheAdslLineConfEnableSpecial3Type, sheAdslLineConfExtnProfileBitSwap SheAdslLineConfEnableSpecial2Type, sheAdslLineConfExtnProfileNtr SheAdslLineConfNtrType, sheAdslLineConfExtnProfileAnnexType SheAdslLineConfAnnexType, sheAdslLineConfExtnProfileAlctlUsVer SheAdslLineConfExtnProfileAlctlUsVerType, sheAdslLineConfExtnProfileUseCustomBin SheAdslLineConfEnableSpecial2Type, sheAdslLineConfExtnProfileDnBinUsage OCTET STRING, sheAdslLineConfExtnProfileMaxDCo SheAdslLineConfIntDephtType, sheAdslLineConfExtnProfileFullRetrain SheAdslLineConfEnableSpecial3Type, sheAdslLineConfExtnProfileAdvertisedCapabilities SheAdslLineConfAdvertisedCapabilitiesType, sheAdslLineConfExtnProfilePsdMaskType SheAdslLineConfPsdMaskType, sheAdslLineConfExtnProfileLineDmtConfMode SheAdslLineConfLineDmtConfModeType, sheAdslLineConfExtnProfileEraseProfiles SheAdslLineConfEnableSpecial2Type, sheAdslLineConfExtnProfileRsMemory SheAdslLineConfRsMemoryType, sheAdslLineConfExtnProfileParamHybridLossTestStart INTEGER, sheAdslLineConfExtnProfileParamHybridLossTestEnd INTEGER, sheAdslLineConfExtnProfileConfMinInp SheAdslConfMinInpType, sheAdslLineConfExtnProfileRfiBandMask OCTET STRING, sheAdslLineConfExtnProfileUpstreamPsdMaskSelection SheAdslLineConfUpstreamPSDMaskSelectionType, sheAdslLineConfExtnProfileMaxNomPsdDs INTEGER, sheAdslLineConfExtnProfileMaxNomAtpDs Gauge32, sheAdslLineConfExtnProfilePsdMaskDs OCTET STRING, sheAdslLineConfExtnProfilePSDMASKdsEnable SheAdslLineConfEnableType, sheAdslLineConfExtnProfileConfMinInpUs SheAdslConfMinInpType } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.1 sheAdslLineConfExtnProfileParametricTestInputFile OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates Name of the Input file from which to take the Mask Array Size, lower and upper mask Array. Null string means no file is specified. Functionality is not supported!" ::= { sheAdslLineConfExtnProfileEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.2 sheAdslLineConfExtnProfileRsIntCorrectionUp OBJECT-TYPE SYNTAX SheAdslLineConfRsIntCorrectionType MAX-ACCESS read-only STATUS current DESCRIPTION "Sets the correction time for the upstream-interleaved buffer. RS can also be disabled. The Default Value for ADSL+ is 3. value125us(3), value250us(4), value500us(5), value1ms(6), value2ms(7), value4ms(8), disable(15) " ::= { sheAdslLineConfExtnProfileEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.3 sheAdslLineConfExtnProfileLineType OBJECT-TYPE SYNTAX SheAdslConfLineType MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter provisions the DSL physical entity at start-up by defining whether and how the line will be channelized, i.e. which channel type(s) are supported. Defined values are: fastOnly(2) -- only fast channel exists (singleLatency) interleavedOnly(3) -- only interleaved channel exists (singleLatency, default) fastAndInterleaved(5) -- both fast and interleaved channels (dualLatency) exist In case of dualLatency (mode 5), the parameter's sheAdslLineConfProfileAtucConfRateChanRatio and sheAdslLineConfProfileAturConfRateChanRatio configures the bandwith distribution. IMPORTANT NOTE: The configuration of dualLatency mode is only available for NE releases up R2.5!! The modification is only possible for profiles, which are NOT IN USE!" DEFVAL { 3 } ::= { sheAdslLineConfExtnProfileEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.4 sheAdslLineConfExtnProfileTxEndBin OBJECT-TYPE SYNTAX INTEGER (6..511 | 65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Highest bin number allowed for Tx signal. The Range & default for ADSL+ is 0x06 - 0x1ff respectively. NE will not accept any changes and use always default value! Ne will select the correct values depending on the configuration of the following values: - AnnexType - DmtConfMode - AdvertisedCapability New with R2.8: If the used annexType was set to 'dynamic', no values of Tx/Rx bins could be set here, because this will be done by the IU depending on the used HW and choosen standard. The profile configuration will be set to value 65535 (0xffff) which means 'autoSelect'." DEFVAL { 511 } ::= { sheAdslLineConfExtnProfileEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.5 sheAdslLineConfExtnProfileTxStartBin OBJECT-TYPE SYNTAX INTEGER (6..511 | 65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Lowest bin number allowed for Tx signal.The Range for ADSL+ is 0x06 - 0x1ff. The Default for Annex B is 58 respectively. For AnnexA it is 32. NE will not accept any changes and use always default value! Ne will select the correct values depending on the configuration of the following values: - AnnexType - DmtConfMode - AdvertisedCapability New with R2.8: If the used annexType was set to 'dynamic', no values of Tx/Rx bins could be set here, because this will be done by the IU depending on the used HW and choosen standard. The profile configuration will be set to value 65535 (0xffff) which means 'autoSelect'." DEFVAL { 32 } ::= { sheAdslLineConfExtnProfileEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.6 sheAdslLineConfExtnProfileMaxBitsPerBin OBJECT-TYPE SYNTAX INTEGER (0..15) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Rx number of bits per bin. NE will not accept any changes and use always default value!" DEFVAL { 14 } ::= { sheAdslLineConfExtnProfileEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.7 sheAdslLineConfExtnProfileRxStartBin OBJECT-TYPE SYNTAX INTEGER (1..57 | 65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Lowest bin number allowed for Rx signal. Default value for AnnexA is 6 and 32 for AnnexB. NE will not accept any changes and use always default value! Ne will select the correct values depending on the configuration of the following values: - AnnexType - DmtConfMode - AdvertisedCapability New with R2.8: If the used annexType was set to 'dynamic', no values of Tx/Rx bins could be set here, because this will be done by the IU depending on the used HW and choosen standard. The profile configuration will be set to value 65535 (0xffff) which means 'autoSelect'." DEFVAL { 6 } ::= { sheAdslLineConfExtnProfileEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.8 sheAdslLineConfExtnProfileRxEndBin OBJECT-TYPE SYNTAX INTEGER (6..64 | 65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Highest bin number allowed for Rx signal. Default Value for AnnexA is 31 and 57 for AnnexB. NE will not accept any changes and use always default value! Ne will select the correct values depending on the configuration of the following values: - AnnexType - DmtConfMode - AdvertisedCapability New with R2.8: If the used annexType was set to 'dynamic', no values of Tx/Rx bins could be set here, because this will be done by the IU depending on the used HW and choosen standard. The profile configuration will be set to value 65535 (0xffff) which means 'autoSelect'." DEFVAL { 31 } ::= { sheAdslLineConfExtnProfileEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.9 sheAdslLineConfExtnProfileRxBinAdjust OBJECT-TYPE SYNTAX SheAdslLineConfExtnProfileRxBinAdjustType MAX-ACCESS read-only STATUS current DESCRIPTION "Employs Rx Start/End bin settings. NE will not accept any changes and use always default value!" DEFVAL { 0 } ::= { sheAdslLineConfExtnProfileEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.10 sheAdslLineConfExtnProfileTriggerMode OBJECT-TYPE SYNTAX SheAdslLineConfTriggerModeType MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Type of event that triggers fast retrain. disable(0), locCrc(1), rmtCrc(2), snrInc(4), snrDec(8) NE will not accept any changes and use always default value!" ::= { sheAdslLineConfExtnProfileEntry 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.11 sheAdslLineConfExtnProfileAdi2x OBJECT-TYPE SYNTAX SheAdslLineConfExtnProfileAdi2xType MAX-ACCESS read-only STATUS current DESCRIPTION "For non standard compliant ADI CPE. NE will not accept any changes and use always default value!" DEFVAL { 1 } ::= { sheAdslLineConfExtnProfileEntry 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.12 sheAdslLineConfExtnProfileStandard OBJECT-TYPE SYNTAX SheAdslLineConfStandardType MAX-ACCESS read-only STATUS current DESCRIPTION "Preferred standard compliance. Outcome is dependent upon standard support of the remote unit.GlobespanVirata High Speed ADSL DMT (ADSL+) applications only. t1413(0), gLite(1), gDmt(2), multiMode(4), adsl2(26), adsl2_plus(27), readsl2(28), adsl2_auto(29), adsl2_plus_auto(30), adsl2adsl2PlusOnly(31) New with R2.8: If the used annexType was set to 'dynamic', the standardTypes 't1413', 'gLite', 'gDmt' and 'readsl2' could NOT be used. 'adsl2_plus_auto' should be the prefered use in that case!" ::= { sheAdslLineConfExtnProfileEntry 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.13 sheAdslLineConfExtnProfileInitiate OBJECT-TYPE SYNTAX SheAdslLineConfInitiateType MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies which end initiates startup. It is also used to send a C-tone to the remote unit. waitPn(0), ctone(1), initiatePn(128) NE will not accept any changes and use always default value! " ::= { sheAdslLineConfExtnProfileEntry 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.14 sheAdslLineConfExtnProfileTxPowerAttenuation OBJECT-TYPE SYNTAX SheAdslLineConfAttenuationType UNITS "dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies value of Tx power attenuation. value0(0)...value21(21)" ::= { sheAdslLineConfExtnProfileEntry 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.15 sheAdslLineConfExtnProfileCodingGain OBJECT-TYPE SYNTAX SheAdslLineConfGainType UNITS "dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Sets the coding gain in dB increments. gain0(0), gain1(4096), gain2(8192), gain3(12288), gain4(16384), gain5(20480), gain6(24576), gain7(28672), auto(65280) NE will not accept any changes and use always default value! " ::= { sheAdslLineConfExtnProfileEntry 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.16 sheAdslLineConfExtnProfileRsFastOvrhdDown OBJECT-TYPE SYNTAX SheAdslLineConfRsFastOvrhdType MAX-ACCESS read-only STATUS current DESCRIPTION "Sets the percentage overhead for the downstream-fast buffer. ovrHd50(1), ovrHd25(2), ovrHd12(3), ovrHd6(4), ovrHd3(5), ovrHd1(7), disable(15) NE will not accept any changes and use always default value! " ::= { sheAdslLineConfExtnProfileEntry 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.17 sheAdslLineConfExtnProfileIntCorrectionDown OBJECT-TYPE SYNTAX SheAdslLineConfRsIntCorrectionType MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter sets the correction time for the downstream interleaved buffer. RS can also be disabled. value125us(3), value250us(4), value500us(5), value1ms(6), value2ms(7), value4ms(8), disable(15) " ::= { sheAdslLineConfExtnProfileEntry 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.18 sheAdslLineConfExtnProfileRsFastOvrhdUp OBJECT-TYPE SYNTAX SheAdslLineConfRsFastOvrhdType MAX-ACCESS read-only STATUS current DESCRIPTION "Sets the percentage overhead for the upstream-fast buffer. ovrHd50(1), ovrHd25(2), ovrHd12(3), ovrHd6(4), ovrHd3(5), ovrHd1(7), disable(15) NE will not accept any changes and use always default value!" ::= { sheAdslLineConfExtnProfileEntry 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.19 sheAdslLineConfExtnProfileDrStby OBJECT-TYPE SYNTAX SheAdslLineConfEnableType MAX-ACCESS read-only STATUS current DESCRIPTION "Provides the ability to disable power to the line driver. disable(0), enable(1) NE will not accept any changes and use always default value! " ::= { sheAdslLineConfExtnProfileEntry 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.20 sheAdslLineConfExtnProfileExpandedExchange OBJECT-TYPE SYNTAX SheAdslLineConfExpandedExchangeType MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to Enable/Disable EES. disable(0), enable(1) NE will not accept any changes and use always default value! " ::= { sheAdslLineConfExtnProfileEntry 20 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.21 sheAdslLineConfExtnProfileEscapeFastRetrainEnable OBJECT-TYPE SYNTAX SheAdslLineConfEnableType MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to Enable/ Disable escape to the fast retrain capability. disable(0), enable(1) NE will not accept any changes and use always default value! " ::= { sheAdslLineConfExtnProfileEntry 21 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.22 sheAdslLineConfExtnProfileFastRetrainEnable OBJECT-TYPE SYNTAX SheAdslLineConfEnableSpecial3Type MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to Enable/ Disable the fast retrain capability. disable(32768), enable(0) NE will not accept any changes and use always default value! " ::= { sheAdslLineConfExtnProfileEntry 22 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.23 sheAdslLineConfExtnProfileBitSwap OBJECT-TYPE SYNTAX SheAdslLineConfEnableSpecial2Type MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to Enable/Disable bit swapping. enable(32768), disable(0) " ::= { sheAdslLineConfExtnProfileEntry 23 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.24 sheAdslLineConfExtnProfileNtr OBJECT-TYPE SYNTAX SheAdslLineConfNtrType MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to Enable/ Disable NTR on a per chip basis." ::= { sheAdslLineConfExtnProfileEntry 24 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.25 sheAdslLineConfExtnProfileAnnexType OBJECT-TYPE SYNTAX SheAdslLineConfAnnexType MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is set as per annex compliance of the code release. GlobespanVirata High Speed ADSL DMT (ADSL+) applications only. annexA(0), annexB(1), highSpeed(2), annexAdsl2(5), annexI(10), annexJ(11), annexM(12) New with R2.8: dynamic(50) If the used annexType was set to 'dynamic', such a profile could be assigned to any type of supported ADSL IU. The IU will select the supported annex himself, depending on HW restrictions and line parameters. This selection made additional restrictions to the following parameters: - tx/rx start and end bin usage - profile Standard - profile AdvertisedCapabilities - profileLineDmtConfMode " ::= { sheAdslLineConfExtnProfileEntry 25 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.26 sheAdslLineConfExtnProfileAlctlUsVer OBJECT-TYPE SYNTAX SheAdslLineConfExtnProfileAlctlUsVerType MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used for T1.413 demo purposes only. NE will not accept any changes and use always default value!" DEFVAL { 2 } ::= { sheAdslLineConfExtnProfileEntry 26 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.27 sheAdslLineConfExtnProfileUseCustomBin OBJECT-TYPE SYNTAX SheAdslLineConfEnableSpecial2Type MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to Enable/ Disable user selection of bin-usage defined in sheAdslLineConfExtnProfileDnBinUsage. disable(0), enable(32768) " DEFVAL { 0 } ::= { sheAdslLineConfExtnProfileEntry 27 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.28 sheAdslLineConfExtnProfileDnBinUsage OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The parameter where a 1 in bit position indicates usage of corresponding bin, whereas a 0 disables usage of corresponding bin." ::= { sheAdslLineConfExtnProfileEntry 28 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.29 sheAdslLineConfExtnProfileMaxDCo OBJECT-TYPE SYNTAX SheAdslLineConfIntDephtType MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to indicate Maximum interleaving depth supported by the customer's hardware. value64(0), value128(4096), value256(8192) " ::= { sheAdslLineConfExtnProfileEntry 29 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.30 sheAdslLineConfExtnProfileFullRetrain OBJECT-TYPE SYNTAX SheAdslLineConfEnableSpecial3Type MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to Indicate enable/disable of auto retrain capability. enable(0), disable(32768) NE will not accept any changes and use always default value! " ::= { sheAdslLineConfExtnProfileEntry 30 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.31 sheAdslLineConfExtnProfileAdvertisedCapabilities OBJECT-TYPE SYNTAX SheAdslLineConfAdvertisedCapabilitiesType MAX-ACCESS read-only STATUS current DESCRIPTION "Controls if the CO will attempt to startup using alternate standards if the CPE does not support ADSL+. New with R2.8: If the used annexType was set to 'dynamic', this parameter should be set to 'disabled' or 'adslPlus'. All other values will not work with the intended set of dynamic annexType selection by IU. " ::= { sheAdslLineConfExtnProfileEntry 31 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.32 sheAdslLineConfExtnProfilePsdMaskType OBJECT-TYPE SYNTAX SheAdslLineConfPsdMaskType MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the PSD mask option to be used." ::= { sheAdslLineConfExtnProfileEntry 32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.33 sheAdslLineConfExtnProfileLineDmtConfMode OBJECT-TYPE SYNTAX SheAdslLineConfLineDmtConfModeType MAX-ACCESS read-only STATUS current DESCRIPTION "Selects if there is overlap or no overlap of bins. Overlapping is only supported by non ISDN profiles and will change the setting for TxStartBin accordingly!!. New with R2.8: If the used annexType was set to 'dynamic', this parameter should be set to 'fdmMode' only. Other values will not work with the intended set of dynamic annexType selection by IU." ::= { sheAdslLineConfExtnProfileEntry 33 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.34 sheAdslLineConfExtnProfileEraseProfiles OBJECT-TYPE SYNTAX SheAdslLineConfEnableSpecial2Type MAX-ACCESS read-only STATUS current DESCRIPTION "Enables/Disables the ability to erase all fast retrain profiles at startup. disable(0), enable(32768) " ::= { sheAdslLineConfExtnProfileEntry 34 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.35 sheAdslLineConfExtnProfileRsMemory OBJECT-TYPE SYNTAX SheAdslLineConfRsMemoryType MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether customer's Hardware should use external RS RAM. Could not be configured and depends only on the used card type." ::= { sheAdslLineConfExtnProfileEntry 35 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.36 sheAdslLineConfExtnProfileParamHybridLossTestStart OBJECT-TYPE SYNTAX INTEGER (0..511) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates Start bin for range of bins to be measured." DEFVAL { 2 } ::= { sheAdslLineConfExtnProfileEntry 36 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.37 sheAdslLineConfExtnProfileParamHybridLossTestEnd OBJECT-TYPE SYNTAX INTEGER (0..511) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates End bin for range of bins to be measured." DEFVAL { 64 } ::= { sheAdslLineConfExtnProfileEntry 37 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.38 sheAdslLineConfExtnProfileConfMinInp OBJECT-TYPE SYNTAX SheAdslConfMinInpType MAX-ACCESS read-only STATUS current DESCRIPTION "New ADSL2+ parameter. The user configures the duration of impulse noise the system should withstand. This parameter configures the value for downstream direction." DEFVAL { 400 } ::= { sheAdslLineConfExtnProfileEntry 38 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.39 -- THIS ELEMENT WILL NOT LONGER BE SUPPORTED BY NE up R2.5. -- Functionality moved to LineTable. sheAdslLineConfExtnProfileRfiBandMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS current DESCRIPTION "BitMask for sheAdslRfiBandIndex. Configured RFI bands are used for this profile." ::= { sheAdslLineConfExtnProfileEntry 39 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.40 sheAdslLineConfExtnProfileUpstreamPsdMaskSelection OBJECT-TYPE SYNTAX SheAdslLineConfUpstreamPSDMaskSelectionType MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the PSD mask option to be used. This parameter is used only for annexes J and M of ITU-T Recs. G.992-3 and G.992.5 Other profiles will ignore the configured value and use per default the value noSelection(0)." REFERENCE "G997.1 chapter 7.3.1.2.11" ::= { sheAdslLineConfExtnProfileEntry 40 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.41 sheAdslLineConfExtnProfileMaxNomPsdDs OBJECT-TYPE SYNTAX INTEGER (-600..-300) UNITS "0.1 dBm/Hz" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum nominal transmit PSD in the downstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz. (physical values are -60 to -30 dBm/Hz)." REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2" DEFVAL { -400 } ::= { sheAdslLineConfExtnProfileEntry 41 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.42 sheAdslLineConfExtnProfileMaxNomAtpDs OBJECT-TYPE SYNTAX Gauge32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum nominal aggregate transmit power in the downstream direction during initialization and Showtime. It ranges from 0 to 255 units of 0.1 dBm (physical values are 0 to 25.5 dBm)." REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2" DEFVAL { 204 } ::= { sheAdslLineConfExtnProfileEntry 42 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.43 sheAdslLineConfExtnProfilePsdMaskDs OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6..96)) MAX-ACCESS read-only STATUS current DESCRIPTION "The downstream PSD mask applicable at the U-C2 reference point. This parameter is used only for G.992.5 and it may impose PSD restrictions (breakpoints) in addition to the Limit PSD mask defined in G.992.5. This is a string of 32 pairs of values in the following structure: Octets 0+1 - Index of 1st sub-carrier used in the context of a first breakpoint. Octet 2 - The PSD reduction for the sub-carrier indicated in octets 0 and 1. Octets 3-5 - Same, for a 2nd breakpoint. Octets 6-8 - Same, for a 3rd breakpoint. This architecture continues until octets 94-95, which are associated with a 32nd breakpoint. Each subcarrier index is an unsigned number in the range 1 and NSCds. Each PSD reduction value is in the range 0 (0dBm/Hz) to 255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz. Valid values are in the range 0 to 190 (0 to -95dBm/Hz). But the range of start-bin and end-bin is in range 0 to 195 (0 to -97.5dBm/Hz). Two break points (6 byte) are reserved for start sub-carrier index and end sub-carrier index. So the range of size is 6 up to 96. When the number of breakpoints is less than 32, all remaining octets are set to the value 0. Note that the content of this object should be correlated with the sub-carriers mask and with the RFI setup." REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2" ::= { sheAdslLineConfExtnProfileEntry 43 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.44 sheAdslLineConfExtnProfilePSDMASKdsEnable OBJECT-TYPE SYNTAX SheAdslLineConfEnableType MAX-ACCESS read-only STATUS current DESCRIPTION "User custom PSD mask-related parameter used by the ATU-C to use user custom PSD mask. (Not available for ADSL but ADSL2 and ADSL2plus )." REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2" DEFVAL { 0 } ::= { sheAdslLineConfExtnProfileEntry 44 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.6.1.38 sheAdslLineConfExtnProfileConfMinInpUs OBJECT-TYPE SYNTAX SheAdslConfMinInpType MAX-ACCESS read-only STATUS current DESCRIPTION "New ADSL2+ parameter. The user configures the duration of impulse noise the system should withstand. This parameter configures the value for upstream direction." DEFVAL { 400 } ::= { sheAdslLineConfExtnProfileEntry 45 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7 sheAdslLineConfExtnProfileControl OBJECT IDENTIFIER ::= { sheAdslLineMIB 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.1 sheAdslLineConfExtnProfileControlRequest OBJECT-TYPE SYNTAX SheAdslControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "modifyAdslLineConfExtnProfile sheAdslLineConfExtnProfileControlIndex sheAdslLineConfExtnProfileControlName ... " ::= { sheAdslLineConfExtnProfileControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.2 sheAdslLineConfExtnProfileControlIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Index of the table entry to be configured. Needed for modify. " ::= { sheAdslLineConfExtnProfileControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.3 sheAdslLineConfExtnProfileControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. " ::= { sheAdslLineConfExtnProfileControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.4 sheAdslLineConfExtnProfileControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. " ::= { sheAdslLineConfExtnProfileControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.5 sheAdslLineConfExtnProfileControlReqResult OBJECT-TYPE SYNTAX SheAdslControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheAdslLineConfExtnProfileControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.6 sheAdslLineConfExtnProfileControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheAdslLineConfExtnProfileControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.7 sheAdslLineConfExtnProfileControlName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "Descriptional name. The name used during configuration of this profile is equal to the name of the sheAdslLineConfProfile with the identical index." ::= { sheAdslLineConfExtnProfileControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.8 -- THIS ELEMENT WILL NOT LONGER BE SUPPORTED BY NE up R2.5. sheAdslLineConfExtnProfileControlParametricTestInputFile OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates Name of the Input file from which to take the Mask Array Size, lower and upper mask Array. Null string means no file is specified." ::= { sheAdslLineConfExtnProfileControl 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.9 sheAdslLineConfExtnProfileControlRsIntCorrectionUp OBJECT-TYPE SYNTAX SheAdslLineConfRsIntCorrectionType MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the correction time for the upstream-interleaved buffer. RS can also be disabled. The Default Value for ADSL+ is 3." ::= { sheAdslLineConfExtnProfileControl 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.10 sheAdslLineConfExtnProfileControlLineType OBJECT-TYPE SYNTAX SheAdslConfLineType MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter provisions the DSL physical entity at start-up by defining whether and how the line will be channelized, i.e. which channel type(s) are supported. Defined values are: fastOnly(2) -- only fast channel exists (singleLatency) interleavedOnly(3) -- only interleaved channel exists (singleLatency, default) fastAndInterleaved(5) -- both fast and interleaved channels (dualLatency) exist In case of dualLatency (mode 5), the parameter's sheAdslLineConfProfileAtucConfRateChanRatio and sheAdslLineConfProfileAturConfRateChanRatio configures the bandwith distribution. IMPORTANT NOTE: The configuration of dualLatency mode is only available for NE releases up R2.5!! The modification is only possible for profiles, which are NOT IN USE!" ::= { sheAdslLineConfExtnProfileControl 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.11 sheAdslLineConfExtnProfileControlTxEndBin OBJECT-TYPE SYNTAX INTEGER (6..511) MAX-ACCESS read-write STATUS current DESCRIPTION "Highest bin number allowed for Tx signal. The Range & default for ADSL+ is 0x06 - 0x1ff respectively. NE will not accept any changes and use always default value! Ne will select the correct values depending on the configuration of the following values: - AnnexType - DmtConfMode - AdvertisedCapability" ::= { sheAdslLineConfExtnProfileControl 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.12 sheAdslLineConfExtnProfileControlTxStartBin OBJECT-TYPE SYNTAX INTEGER (6..511) MAX-ACCESS read-write STATUS current DESCRIPTION "Lowest bin number allowed for Tx signal.The Range for ADSL+ is 0x06 - 0x1ff. NE will not accept any changes and use always default value! Ne will select the correct values depending on the configuration of the following values: - AnnexType - DmtConfMode - AdvertisedCapability" ::= { sheAdslLineConfExtnProfileControl 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.13 -- THIS ELEMENT WILL NOT LONGER BE SUPPORTED BY NE up R2.5. sheAdslLineConfExtnProfileControlMaxBitsPerBin OBJECT-TYPE SYNTAX INTEGER (0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum Rx number of bits per bin. NE will not accept any changes and use always default value!" ::= { sheAdslLineConfExtnProfileControl 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.14 sheAdslLineConfExtnProfileControlRxStartBin OBJECT-TYPE SYNTAX INTEGER (1..57) MAX-ACCESS read-write STATUS current DESCRIPTION "Lowest bin number allowed for Rx signal. NE will not accept any changes and use always default value! Ne will select the correct values depending on the configuration of the following values: - AnnexType - DmtConfMode - AdvertisedCapability" ::= { sheAdslLineConfExtnProfileControl 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.15 sheAdslLineConfExtnProfileControlRxEndBin OBJECT-TYPE SYNTAX INTEGER (6..64) MAX-ACCESS read-write STATUS current DESCRIPTION "Highest bin number allowed for Rx signal. NE will not accept any changes and use always default value! Ne will select the correct values depending on the configuration of the following values: - AnnexType - DmtConfMode - AdvertisedCapability" ::= { sheAdslLineConfExtnProfileControl 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.16 -- THIS ELEMENT WILL NOT LONGER BE SUPPORTED BY NE up R2.5. sheAdslLineConfExtnProfileControlRxBinAdjust OBJECT-TYPE SYNTAX SheAdslLineConfExtnProfileRxBinAdjustType MAX-ACCESS read-write STATUS current DESCRIPTION "Employs Rx Start/End bin settings. NE will not accept any changes and use always default value!" ::= { sheAdslLineConfExtnProfileControl 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.17 -- THIS ELEMENT WILL NOT LONGER BE SUPPORTED BY NE up R2.5. sheAdslLineConfExtnProfileControlTriggerMode OBJECT-TYPE SYNTAX SheAdslLineConfTriggerModeType MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the Type of event that triggers fast retrain. NE will not accept any changes and use always default value!" ::= { sheAdslLineConfExtnProfileControl 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.18 -- THIS ELEMENT WILL NOT LONGER BE SUPPORTED BY NE up R2.5. sheAdslLineConfExtnProfileControlAdi2x OBJECT-TYPE SYNTAX SheAdslLineConfExtnProfileAdi2xType MAX-ACCESS read-write STATUS current DESCRIPTION "For non standard compliant ADI CPE. NE will not accept any changes and use always default value!" ::= { sheAdslLineConfExtnProfileControl 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.19 sheAdslLineConfExtnProfileControlStandard OBJECT-TYPE SYNTAX SheAdslLineConfStandardType MAX-ACCESS read-write STATUS current DESCRIPTION "Preferred standard compliance. Outcome is dependent upon standard support of the remote unit.GlobespanVirata High Speed ADSL DMT (ADSL+) applications only. New with R2.8: If the used annexType was set to 'dynamic', the standardTypes 't1413', 'gLite', 'gDmt' and 'readsl2' could NOT be used. 'adsl2_plus_auto' should be the prefered use in that case!" ::= { sheAdslLineConfExtnProfileControl 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.20 -- THIS ELEMENT WILL NOT LONGER BE SUPPORTED BY NE up R2.5. sheAdslLineConfExtnProfileControlInitiate OBJECT-TYPE SYNTAX SheAdslLineConfInitiateType MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies which end initiates startup. It is also used to send a C-tone to the remote unit. NE will not accept any changes and use always default value!" ::= { sheAdslLineConfExtnProfileControl 20 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.21 sheAdslLineConfExtnProfileControlTxPowerAttenuation OBJECT-TYPE SYNTAX SheAdslLineConfAttenuationType UNITS "dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies value of Tx power attenuation." ::= { sheAdslLineConfExtnProfileControl 21 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.22 -- THIS ELEMENT WILL NOT LONGER BE SUPPORTED BY NE up R2.5. sheAdslLineConfExtnProfileControlCodingGain OBJECT-TYPE SYNTAX SheAdslLineConfGainType UNITS "dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the coding gain in dB increments. NE will not accept any changes and use always default value!" ::= { sheAdslLineConfExtnProfileControl 22 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.23 -- THIS ELEMENT WILL NOT LONGER BE SUPPORTED BY NE up R2.5. sheAdslLineConfExtnProfileControlRsFastOvrhdDown OBJECT-TYPE SYNTAX SheAdslLineConfRsFastOvrhdType MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the percentage overhead for the downstream-fast buffer. NE will not accept any changes and use always default value!" ::= { sheAdslLineConfExtnProfileControl 23 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.24 sheAdslLineConfExtnProfileControlIntCorrectionDown OBJECT-TYPE SYNTAX SheAdslLineConfRsIntCorrectionType MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter sets the correction time for the downstream interleaved buffer.RS can also be disabled." ::= { sheAdslLineConfExtnProfileControl 24 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.25 -- THIS ELEMENT WILL NOT LONGER BE SUPPORTED BY NE up R2.5. sheAdslLineConfExtnProfileControlRsFastOvrhdUp OBJECT-TYPE SYNTAX SheAdslLineConfRsFastOvrhdType MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the percentage overhead for the upstream-fast buffer. NE will not accept any changes and use always default value!" ::= { sheAdslLineConfExtnProfileControl 25 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.26 -- THIS ELEMENT WILL NOT LONGER BE SUPPORTED BY NE up R2.5. sheAdslLineConfExtnProfileControlDrStby OBJECT-TYPE SYNTAX SheAdslLineConfEnableType MAX-ACCESS read-write STATUS current DESCRIPTION "Provides the ability to disable power to the line driver. NE will not accept any changes and use always default value!" ::= { sheAdslLineConfExtnProfileControl 26 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.27 -- THIS ELEMENT WILL NOT LONGER BE SUPPORTED BY NE up R2.5. sheAdslLineConfExtnProfileControlExpandedExchange OBJECT-TYPE SYNTAX SheAdslLineConfExpandedExchangeType MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to Enable/Disable EES. NE will not accept any changes and use always default value!" ::= { sheAdslLineConfExtnProfileControl 27 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.28 -- THIS ELEMENT WILL NOT LONGER BE SUPPORTED BY NE up R2.5. sheAdslLineConfExtnProfileControlEscapeFastRetrainEnable OBJECT-TYPE SYNTAX SheAdslLineConfEnableType MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to Enable/ Disable escape to the fast retrain capability. NE will not accept any changes and use always default value!" ::= { sheAdslLineConfExtnProfileControl 28 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.29 -- THIS ELEMENT WILL NOT LONGER BE SUPPORTED BY NE up R2.5. sheAdslLineConfExtnProfileControlFastRetrainEnable OBJECT-TYPE SYNTAX SheAdslLineConfEnableSpecial3Type MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to Enable/ Disable the fast retrain capability. NE will not accept any changes and use always default value!" ::= { sheAdslLineConfExtnProfileControl 29 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.30 sheAdslLineConfExtnProfileControlBitSwap OBJECT-TYPE SYNTAX SheAdslLineConfEnableSpecial2Type MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to Enable/Disable bit swapping." ::= { sheAdslLineConfExtnProfileControl 30 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.31 sheAdslLineConfExtnProfileControlNtr OBJECT-TYPE SYNTAX SheAdslLineConfNtrType MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to Enable/ Disable NTR on a per chip basis." ::= { sheAdslLineConfExtnProfileControl 31 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.32 sheAdslLineConfExtnProfileControlAnnexType OBJECT-TYPE SYNTAX SheAdslLineConfAnnexType MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter is set as per annex compliance of the code release. GlobespanVirata High Speed ADSL DMT (ADSL+) applications only. New with R2.8: dynamic(50) If the used annexType was set to 'dynamic', such a profile could be assigned to any type of supported ADSL IU. The IU will select the supported annex himself, depending on HW restrictions and line parameters. This selection made additional restrictions to the following parameters: - tx/rx start and end bin usage - profile Standard - profile AdvertisedCapabilities - profileLineDmtConfMode " ::= { sheAdslLineConfExtnProfileControl 32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.33 -- THIS ELEMENT WILL NOT LONGER BE SUPPORTED BY NE up R2.5. sheAdslLineConfExtnProfileControlAlctlUsVer OBJECT-TYPE SYNTAX SheAdslLineConfExtnProfileAlctlUsVerType MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used for T1.413 demo purposes only. NE will not accept any changes and use always default value!" ::= { sheAdslLineConfExtnProfileControl 33 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.34 sheAdslLineConfExtnProfileControlUseCustomBin OBJECT-TYPE SYNTAX SheAdslLineConfEnableSpecial2Type MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to Enable/ Disable user selection on which of the 256 bins will be enabled for downstream transmission." ::= { sheAdslLineConfExtnProfileControl 34 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.35 sheAdslLineConfExtnProfileControlDnBinUsage OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The parameter where a 1 in bit position indicates usage of corresponding bin,whereas a 0 disables usage of corresponding bin." ::= { sheAdslLineConfExtnProfileControl 35 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.36 sheAdslLineConfExtnProfileControlMaxDCo OBJECT-TYPE SYNTAX SheAdslLineConfIntDephtType MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to indicate Maximum interleaving depth supported by the customer's hardware." ::= { sheAdslLineConfExtnProfileControl 36 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.37 -- THIS ELEMENT WILL NOT LONGER BE SUPPORTED BY NE up R2.5. sheAdslLineConfExtnProfileControlFullRetrain OBJECT-TYPE SYNTAX SheAdslLineConfEnableSpecial3Type MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to Indicate enable/disable of auto retrain capability. NE will not accept any changes and use always default value!" ::= { sheAdslLineConfExtnProfileControl 37 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.38 sheAdslLineConfExtnProfileControlAdvertisedCapabilities OBJECT-TYPE SYNTAX SheAdslLineConfAdvertisedCapabilitiesType MAX-ACCESS read-write STATUS current DESCRIPTION "Controls if the CO will attempt to startup using alternate standards if the CPE does not support ADSL+. New with R2.8: If the used annexType was set to 'dynamic', this parameter should be set to 'disabled' or 'adslPlus'. All other values will not work with the intended set of dynamic annexType selection by IU." ::= { sheAdslLineConfExtnProfileControl 38 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.39 sheAdslLineConfExtnProfileControlPsdMaskType OBJECT-TYPE SYNTAX SheAdslLineConfPsdMaskType MAX-ACCESS read-write STATUS current DESCRIPTION "Selects the PSD mask option to be used." ::= { sheAdslLineConfExtnProfileControl 39 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.40 sheAdslLineConfExtnProfileControlLineDmtConfMode OBJECT-TYPE SYNTAX SheAdslLineConfLineDmtConfModeType MAX-ACCESS read-write STATUS current DESCRIPTION "Selects if there is overlap or no overlap of bins. Overlapping is only supported by non ISDN profiles and will change the setting for TxStartBin accordingly!!. New with R2.8: If the used annexType was set to 'dynamic', this parameter should be set to 'fdmMode' only. Other values will not work with the intended set of dynamic annexType selection by IU." ::= { sheAdslLineConfExtnProfileControl 40 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.41 sheAdslLineConfExtnProfileControlEraseProfiles OBJECT-TYPE SYNTAX SheAdslLineConfEnableSpecial2Type MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/Disables the ability to erase all fast retrain profiles at startup." ::= { sheAdslLineConfExtnProfileControl 41 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.43 sheAdslLineConfExtnProfileControlParamHybridLossTestStart OBJECT-TYPE SYNTAX INTEGER (0..511) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates Start bin for range of bins to be measured." ::= { sheAdslLineConfExtnProfileControl 43 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.44 sheAdslLineConfExtnProfileControlParamHybridLossTestEnd OBJECT-TYPE SYNTAX INTEGER (0..511) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates End bin for range of bins to be measured." ::= { sheAdslLineConfExtnProfileControl 44 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.45 sheAdslLineConfExtnProfileControlConfMinInp OBJECT-TYPE SYNTAX SheAdslConfMinInpType MAX-ACCESS read-write STATUS current DESCRIPTION "Look at table." ::= { sheAdslLineConfExtnProfileControl 45 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.46 -- THIS ELEMENT WILL NOT LONGER BE SUPPORTED BY NE up R2.5. -- Functionality moved to LineTable. sheAdslLineConfExtnProfileControlRfiBandMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-write STATUS current DESCRIPTION "BitMask for sheAdslRfiBandIndex in sheAdslRfiBandTable." ::= { sheAdslLineConfExtnProfileControl 46 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.47 sheAdslLineConfExtnProfileControlUpstreamPsdMaskSelection OBJECT-TYPE SYNTAX SheAdslLineConfUpstreamPSDMaskSelectionType MAX-ACCESS read-write STATUS current DESCRIPTION "This configuration parameter defines which upstream PSD mask is enabled. This parameter is used only for annexes J and M of ITU-T Recs. G.992-3 and G.992.5" ::= { sheAdslLineConfExtnProfileControl 47 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.48 sheAdslLineConfExtnProfileControlMaxNomPsdDs OBJECT-TYPE SYNTAX INTEGER (-600..-300) UNITS "0.1 dBm/Hz" MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum nominal transmit PSD in the downstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz. (physical values are -60 to -30 dBm/Hz)." REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2" ::= { sheAdslLineConfExtnProfileControl 48 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.49 sheAdslLineConfExtnProfileControlMaxNomAtpDs OBJECT-TYPE SYNTAX Gauge32 (0..255) UNITS "0.1 dBm/Hz" MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum nominal aggregate transmit power in the downstream direction during initialization and Showtime. It ranges from 0 to 255 units of 0.1 dBm (physical values are 0 to 25.5 dBm)." REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2" ::= { sheAdslLineConfExtnProfileControl 49 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.50 sheAdslLineConfExtnProfileControlPsdMaskDs OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6..96)) MAX-ACCESS read-write STATUS current DESCRIPTION "The downstream PSD mask applicable at the U-C2 reference point. This parameter is used only for G.992.5 and it may impose PSD restrictions (breakpoints) in addition to the Limit PSD mask defined in G.992.5. This is a string of 32 pairs of values in the following structure: Octets 0+1 - Index of 1st sub-carrier used in the context of a first breakpoint. Octet 2 - The PSD reduction for the sub-carrier indicated in octets 0 and 1. Octets 3-5 - Same, for a 2nd breakpoint. Octets 6-8 - Same, for a 3rd breakpoint. This architecture continues until octets 94-95, which are associated with a 32nd breakpoint. Each subcarrier index is an unsigned number in the range 1 and NSCds. Each PSD reduction value is in the range 0 (0dBm/Hz) to 255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz. Valid values are in the range 0 to 190 (0 to -95dBm/Hz). But the range of start-bin and end-bin is in range 0 to 195 (0 to -97.5dBm/Hz). Two break points (6 byte) are reserved for start sub-carrier index and end sub-carrier index. So the range of size is 6 up to 96. When the number of breakpoints is less than 32, all remaining octets are set to the value 0. Note that the content of this object should be correlated with the sub-carriers mask and with the RFI setup." REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2" ::= { sheAdslLineConfExtnProfileControl 50 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.51 sheAdslLineConfExtnProfileControlPSDMASKdsEnable OBJECT-TYPE SYNTAX SheAdslLineConfEnableType MAX-ACCESS read-write STATUS current DESCRIPTION "User custom PSD mask-related parameter used by the ATU-C to use user custom PSD mask. (Not available for ADSL but ADSL2 and ADSL2plus )." REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2" ::= { sheAdslLineConfExtnProfileControl 51 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.52 sheAdslLineConfExtnProfileControlPSDMASKdsRequestResult OBJECT-TYPE SYNTAX SheAdslControlPSDMASKdsRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION " The result of the last psd commmand" ::= { sheAdslLineConfExtnProfileControl 52 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.7.45 sheAdslLineConfExtnProfileControlConfMinInpUs OBJECT-TYPE SYNTAX SheAdslConfMinInpType MAX-ACCESS read-write STATUS current DESCRIPTION "Look at table." ::= { sheAdslLineConfExtnProfileControl 53 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.8 sheAdslLineTable OBJECT-TYPE SYNTAX SEQUENCE OF SheAdslLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes common attributes describing both ends of the line. It is required for all ADSL physical interfaces. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94)." ::= { sheAdslLineMIB 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.8.1 sheAdslLineEntry OBJECT-TYPE SYNTAX SheAdslLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in adslLineTable." INDEX { ifIndex } ::= { sheAdslLineTable 1 } SheAdslLineEntry ::= SEQUENCE { sheAdslLineCoding AdslLineCodingType, sheAdslLineType SheAdslConfLineType, sheAdslLineSpecific VariablePointer, sheAdslLineConfProfile SnmpAdminString, sheAdslLineAlarmConfProfile SnmpAdminString, sheAdslLineAction SheAdslLineActionType, sheAdslLineLineDmtTrellis SheAdslLineTrellisModeType, sheAdslLineUtopiaL2RxAddr INTEGER, sheAdslLineUtopiaL2TxAddr INTEGER, sheAdslLineClockType SheAdslLineClockType, sheAdslLineAtucCapability SheAdslAtuxCapabilityType, sheAdslLineAturCapability SheAdslAtuxCapabilityType, sheAdslLineAtuActualCapability SheAdslAtuxCapabilityType, sheAdslLinePwrMgmtPMSF SheAdslPwrMgmtPMSFType, sheAdslLineDeltConfLDSF SheAdslLineDeltConfLDSFType, sheAdslLineRfiBandMask OCTET STRING, sheAdslLineDpboProfile SnmpAdminString } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.8.1.1 sheAdslLineCoding OBJECT-TYPE SYNTAX AdslLineCodingType MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the ADSL coding type used on this line." ::= { sheAdslLineEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.8.1.2 sheAdslLineType OBJECT-TYPE SYNTAX SheAdslConfLineType MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the type of ADSL physical line entity that exists, by defining whether and how the line is channelized. If the line is channelized, the value will be other than noChannel(1). This object shows which channel type(s) are currently supported. This values are possible: no channels exist (maybe line is not accessible) fast channel exists only (singleLatency) interleaved channel exists only (singleLatency) fast and interleaved channel exist (dualLatency)" ::= { sheAdslLineEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.8.1.3 sheAdslLineSpecific OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS current DESCRIPTION "OID instance in vendor-specific MIB. The Instance may be used to determine shelf/slot/port of the ATUC interface in a DSLAM." ::= { sheAdslLineEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.8.1.4 sheAdslLineConfProfile OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object identifies the row in the ADSL Line Configuration Profile Table, which applies for this ADSL line, and channels if applicable. A 'DEFVAL' profile will always be exist and set per default. " ::= { sheAdslLineEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.8.1.6 sheAdslLineAlarmConfProfile OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object identifies the row in the ADSL Line Alarm Configuration Profile Table, which applies to this ADSL line, and channels if applicable. A 'DEFAULT' profile will always be exist and set. " ::= { sheAdslLineEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.8.1.7 sheAdslLineAction OBJECT-TYPE SYNTAX SheAdslLineActionType MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates parameter that allows actions on a per line basis. These actions include abort, startup, and tests." ::= { sheAdslLineEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.8.1.8 sheAdslLineLineDmtTrellis OBJECT-TYPE SYNTAX SheAdslLineTrellisModeType MAX-ACCESS read-only STATUS current DESCRIPTION "Parameter that indicates whether trellis coding has been enabled or disabled. Trellis coding should always be enabled for its clear performance advantage. trellisOn(1), trellisOff(2) " ::= { sheAdslLineEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.8.1.9 -- THIS ELEMENT WILL NOT LONGER BE SUPPORTED BY NE up R2.5. sheAdslLineUtopiaL2RxAddr OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates UTOPIA Level 2 Rx address for a line." ::= { sheAdslLineEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.8.1.10 -- THIS ELEMENT WILL NOT LONGER BE SUPPORTED BY NE up R2.5. sheAdslLineUtopiaL2TxAddr OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates UTOPIA Level 2 Tx address for a line." ::= { sheAdslLineEntry 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.8.1.12 -- THIS ELEMENT WILL NOT LONGER BE SUPPORTED BY NE up R2.5. sheAdslLineClockType OBJECT-TYPE SYNTAX SheAdslLineClockType MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates parameter to set use of either crystal or oscillator." ::= { sheAdslLineEntry 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.8.1.13 sheAdslLineAtucCapability OBJECT-TYPE SYNTAX SheAdslAtuxCapabilityType MAX-ACCESS read-only STATUS current DESCRIPTION "The capability of co-side. Be aware that multiple bits could be set! Each bit set to 1 means, that the corresponding standart is supported." ::= { sheAdslLineEntry 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.8.1.14 sheAdslLineAturCapability OBJECT-TYPE SYNTAX SheAdslAtuxCapabilityType MAX-ACCESS read-only STATUS current DESCRIPTION "The capability of remote-side. Only available if line has trained - otherwise 0. Be aware that multiple bits could be set! Each bit set to 1 means, that the corresponding standart is supported." ::= { sheAdslLineEntry 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.8.1.15 sheAdslLineAtuActualCapability OBJECT-TYPE SYNTAX SheAdslAtuxCapabilityType MAX-ACCESS read-only STATUS current DESCRIPTION "The actual used capability of the line. Only available if line has trained - otherwise 0. Each bit set to 1 means, that the corresponding standart is supported." ::= { sheAdslLineEntry 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.8.1.16 sheAdslLinePwrMgmtPMSF OBJECT-TYPE SYNTAX SheAdslPwrMgmtPMSFType MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the action that forces a change in the line state of power management. (Not available for ADSL G992.1) Valid values: pmsfL0ToL2StateForce(1) -> testmode, set running line to L2 power safe mode pmsfL2ToL0StateForce(3) -> switch back line from L2 power safe mode to full power L0 state The transitions pmsfL3ToL0StateForce (unlock) and pmsfL3StateForce (lock) should always be done via ifAdminState setting. " REFERENCE "G997.1 chapter 7.3.1.1.3" ::= { sheAdslLineEntry 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.8.1.17 sheAdslLineDeltConfLDSF OBJECT-TYPE SYNTAX SheAdslLineDeltConfLDSFType MAX-ACCESS read-only STATUS current DESCRIPTION "DELT-related parameter used by the ATU-C to force the line into loop diagnostics mode. (Not available for ADSL but ADSL2 and ADSL2plus )." DEFVAL { inhibit } ::= { sheAdslLineEntry 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.8.1.18 sheAdslLineRfiBandMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS current DESCRIPTION "BitMask for used sheAdslRfiBandIndex. A Bit-Position correspond's with an index in sheAdslRfiBandTable and mark configured RFI bands they are used for this profile." ::= { sheAdslLineEntry 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.8.1.19 sheAdslLineDpboProfile OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object identifies the row in the AdslLineDpboProfile Table, which applies for this ADSL line. No 'DEFVAL' profile will exist. Per default no profile is assigned!" DEFVAL { "" } ::= { sheAdslLineEntry 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.9 sheAdslLineControl OBJECT IDENTIFIER ::= { sheAdslLineMIB 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.9.1 sheAdslLineControlRequest OBJECT-TYPE SYNTAX SheAdslControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "modifyAdslLineEntry: sheAdslLineControlIndex sheAdslLineControlConfProfile sheAdslLineControlAction modifyAdslLineAlarmConfProfileEntry: sheAdslLineControlIndex sheAdslLineControlAlarmConfProfile forceAdslLinePwrMgmtState: vheAdslLineControlIndex sheAdslLineControlPwrMgmtPMSF modifyAdslLineDeltConfEntry: sheAdslLineControlIndex sheAdslLineControlDeltConfLDSF modifyAdslLineRfiBandMask: sheAdslLineControlIndex sheAdslLineControlRfiBandMask ##New for SHR R2.6 setAdslLineDpboProfileEntry: sheAdslLineControlIndex sheAdslLineControlDpboProfile " ::= { sheAdslLineControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.9.2 sheAdslLineControlIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "IfIndex of the configured adsl-interface." ::= { sheAdslLineControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.9.3 sheAdslLineControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. " ::= { sheAdslLineControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.9.4 sheAdslLineControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. " ::= { sheAdslLineControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.9.5 sheAdslLineControlReqResult OBJECT-TYPE SYNTAX SheAdslControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheAdslLineControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.9.6 sheAdslLineControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheAdslLineControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.9.7 sheAdslLineControlConfProfile OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object identifies the row in the ADSL Line Configuration Profile Table, (adslLineConfProfileTable), which applies for this ADSL line, and channels if applicable. For the used `dynamic' mode, in the case which the configuration profile has not been set, the value will be set to `DEFVAL'. " ::= { sheAdslLineControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.9.9 sheAdslLineControlAlarmConfProfile OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object identifies the row in the ADSL Line Alarm Configuration Profile Table, (adslLineAlarmConfProfileTable), which applies to this ADSL line, and channels if applicable. For the used `dynamic' mode, in the case which the alarm profile has not been set, the value will be set to `DEFVAL'. " ::= { sheAdslLineControl 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.9.10 sheAdslLineControlAction OBJECT-TYPE SYNTAX SheAdslLineActionType MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates parameter that allows actions on a per line basis. These actions include abort, startup, and tests." ::= { sheAdslLineControl 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.9.11 sheAdslLineControlPwrMgmtPMSF OBJECT-TYPE SYNTAX SheAdslPwrMgmtPMSFType MAX-ACCESS read-write STATUS current DESCRIPTION "Force a change in the line state of power management. (Not available for ADSL G992.1) Valid values: pmsfL0ToL2StateForce(1) -> testmode, set running line to L2 power safe mode pmsfL2ToL0StateForce(3) -> switch back line from L2 power safe mode to full power L0 state The transitions pmsfL3ToL0StateForce (unlock) and pmsfL3StateForce (lock) should always be done via ifAdminState setting." ::= { sheAdslLineControl 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.9.12 sheAdslLineControlDeltConfLDSF OBJECT-TYPE SYNTAX SheAdslLineDeltConfLDSFType MAX-ACCESS read-write STATUS current DESCRIPTION "DELT-related parameter used by the ATU-C to force the line into loop diagnostics mode. (Not available for ADSL but ADSL2 and ADSL2plus )." ::= { sheAdslLineControl 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.9.13 sheAdslLineControlRfiBandMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..4)) MAX-ACCESS read-write STATUS current DESCRIPTION "BitMask for sheAdslRfiBandIndex in sheAdslRfiBandTable." ::= { sheAdslLineControl 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.9.7 sheAdslLineControlDpboProfile OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object identifies the row in the AdslLineDpboProfile Table, which applies for this ADSL line." ::= { sheAdslLineControl 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.10 sheAdslAtucPhysTable OBJECT-TYPE SYNTAX SEQUENCE OF SheAdslAtucPhysEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides one row for each ATUC. Each row contains the Physical Layer Parameters table for that ATUC. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94)." ::= { sheAdslLineMIB 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.10.1 sheAdslAtucPhysEntry OBJECT-TYPE SYNTAX SheAdslAtucPhysEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the adslAtucPhysTable." INDEX { ifIndex } ::= { sheAdslAtucPhysTable 1 } SheAdslAtucPhysEntry ::= SEQUENCE { sheAdslAtucPhysInvSerialNumber SnmpAdminString, sheAdslAtucPhysInvVendorID SnmpAdminString, sheAdslAtucPhysInvVersionNumber SnmpAdminString, sheAdslAtucPhysCurrSnrMgn INTEGER, sheAdslAtucPhysCurrAtn Gauge32, sheAdslAtucPhysCurrStatus SheAdslLineCurrentStatusType, sheAdslAtucPhysCurrOutputPwr INTEGER, sheAdslAtucPhysCurrAttainableRate Gauge32, sheAdslAtucPhysOpState SheAdslLineOpStateType, sheAdslAtucPhysActualStd SheAdslLineConfStandardType, sheAdslAtucPhysBertError Unsigned32, sheAdslAtucPhysTxAtmCellCounter Counter32, sheAdslAtucPhysRxAtmCellCounter Unsigned32, sheAdslAtucPhysStartProgress Unsigned32, sheAdslAtucPhysIdleBertError Unsigned32, sheAdslAtucPhysIdleBertCells Unsigned32, sheAdslAtucPhysBertSync SheAdslAtucPhysBertSyncType, sheAdslAtucPhysParametricTestResult SheAdslAtucPhysParametricTestResultType, sheAdslAtucPwrMgmtState SheAdslPwrMgmtStateType, sheAdslAtucPhysDeltHLINSCus Unsigned32, sheAdslAtucPhysDeltHLINpsus OCTET STRING, sheAdslAtucPhysDeltHLOGMTus Unsigned32, sheAdslAtucPhysDeltHLOGpsus OCTET STRING, sheAdslAtucPhysDeltQLNMTus Unsigned32, sheAdslAtucPhysDeltQLNpsus OCTET STRING, sheAdslAtucPhysActState SheAdslLineActStateType, sheAdslAtucPhysCurrentBinStatus OCTET STRING, sheAdslAtucPhysCurrentBinBitLoading OCTET STRING, sheAdslAtucPhysDeltSNRMTus Unsigned32, sheAdslAtucPhysDeltDMTBinSNRus OCTET STRING, sheAdslAtucPhysDeltLastTxState SheAdslPhysAtucDeltLastTxStateType, sheAdslAtucPhysDeltSATNus Unsigned32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.10.1.1 sheAdslAtucPhysInvSerialNumber OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor specific string that identifies the vendor equipment." ::= { sheAdslAtucPhysEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.10.1.2 sheAdslAtucPhysInvVendorID OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor ID code is a copy of the binary vendor identification field defined by the PHY[10] and expressed as readable characters." REFERENCE "ANSI T1.413[10]" ::= { sheAdslAtucPhysEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.10.1.3 sheAdslAtucPhysInvVersionNumber OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor specific version number sent by this ATU as part of the initialization messages. It is a copy of the binary version number field defined by the PHY[10] and expressed as readable characters." REFERENCE "ANSI T1.413[10]" ::= { sheAdslAtucPhysEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.10.1.4 sheAdslAtucPhysCurrSnrMgn OBJECT-TYPE SYNTAX INTEGER (-640..640) UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Noise Margin as seen by this ATU with respect to its received signal in tenth dB." ::= { sheAdslAtucPhysEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.10.1.5 sheAdslAtucPhysCurrAtn OBJECT-TYPE SYNTAX Gauge32 (0..630) UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Measured difference in the total power transmitted by the peer ATU and the total power received by this ATU." ::= { sheAdslAtucPhysEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.10.1.6 sheAdslAtucPhysCurrStatus OBJECT-TYPE SYNTAX SheAdslLineCurrentStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates current state of the ATUC line. This is a bit-map of possible conditions. The various bit positions are: 0 noDefect There no defects on the line 1 lossOfFraming ATUC failure due to not receiving valid frame. 2 lossOfSignal ATUC failure due to not receiving signal. 3 lossOfPower ATUC failure due to loss of power. Note: the Agent may still function. 4 lossOfSignalQuality Loss of Signal Quality is declared when the Noise Margin falls below the Minimum Noise Margin, or the bit-error-rate exceeds 10^-7. 5 lossOfLink ATUC failure due to inability to link with ATUR. 6 dataInitFailure ATUC failure during initialization due to bit errors corrupting startup exchange data. 7 configInitFailure ATUC failure during initialization due to peer ATU not able to support requested configuration 8 protocolInitFailure ATUC failure during initialization due to incompatible protocol used by the peer ATU. 9 noPeerAtuPresent ATUC failure during initialization due to no activation sequence detected from peer ATU. This is intended to supplement ifOperStatus." ::= { sheAdslAtucPhysEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.10.1.7 sheAdslAtucPhysCurrOutputPwr OBJECT-TYPE SYNTAX INTEGER (-310..310) UNITS "tenth dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Measured total output power transmitted by this ATU. This is the measurement that was reported during the last activation sequence." ::= { sheAdslAtucPhysEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.10.1.8 sheAdslAtucPhysCurrAttainableRate OBJECT-TYPE SYNTAX Gauge32 UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum currently attainable data rate by the ATU. This value will be equal or greater than the current line rate." ::= { sheAdslAtucPhysEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.10.1.9 sheAdslAtucPhysOpState OBJECT-TYPE SYNTAX SheAdslLineOpStateType MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the operational state of the ATU. Values include idle,handshake, training, Delt mode (loop diagnostic mode), etc. idle(0), data(1), bootUpLoad(8), handshake(16), training(24), framerSync(26), fastRetrainInProg(27), llTest(128), dlTest(131), txTest(132), atmLpTest(133), discovery(46), deltTraining(139), delt(140) " ::= { sheAdslAtucPhysEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.10.1.10 sheAdslAtucPhysActualStd OBJECT-TYPE SYNTAX SheAdslLineConfStandardType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides actual ATU-C configuration based on outcome of negotiation with ATU-R. In this case, the parameter provides actual standard used for the connection." ::= { sheAdslAtucPhysEntry 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.10.1.11 sheAdslAtucPhysBertError OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the No. of bit errors detected during BERT." ::= { sheAdslAtucPhysEntry 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.10.1.12 sheAdslAtucPhysTxAtmCellCounter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object Provides transmit ATM cell counter." ::= { sheAdslAtucPhysEntry 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.10.1.13 sheAdslAtucPhysRxAtmCellCounter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object Provides receive ATM cell counter." ::= { sheAdslAtucPhysEntry 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.10.1.14 sheAdslAtucPhysStartProgress OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides current detailed start up information to be used for debugging." ::= { sheAdslAtucPhysEntry 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.10.1.15 sheAdslAtucPhysIdleBertError OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bit errors." ::= { sheAdslAtucPhysEntry 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.10.1.16 sheAdslAtucPhysIdleBertCells OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of idle cells." ::= { sheAdslAtucPhysEntry 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.10.1.17 sheAdslAtucPhysBertSync OBJECT-TYPE SYNTAX SheAdslAtucPhysBertSyncType MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the Signal is in Sync or not." ::= { sheAdslAtucPhysEntry 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.10.1.18 sheAdslAtucPhysParametricTestResult OBJECT-TYPE SYNTAX SheAdslAtucPhysParametricTestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Result of the Parametric Test conducted on the Xcvr." ::= { sheAdslAtucPhysEntry 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.10.1.19 sheAdslAtucPwrMgmtState OBJECT-TYPE SYNTAX SheAdslPwrMgmtStateType MAX-ACCESS read-only STATUS current DESCRIPTION "Line Power Management State. (Not valid for ADSL G992.1)" REFERENCE "G997.1 chapter 7.5.1.2" ::= { sheAdslAtucPhysEntry 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.10.1.20 sheAdslAtucPhysDeltHLINSCus OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "DELT-related parameter that provides the scale factor to be applied to the upstream Hlin(f) values. Only available after a loop diagnostic procedure. (Not available for ADSL but ADSL2 & ADSL2plus)." REFERENCE "G997.1 chapter 7.5.1.18.5" ::= { sheAdslAtucPhysEntry 20 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.10.1.21 sheAdslAtucPhysDeltHLINpsus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "DELT-related parameter that provides an array of complex upstream Hlin(f) values in linear scale. Every two octects refer to one element in this array of octets. (Not available for ADSL but ADSL2 & ADSL2plus). This parameter is an array of complex upstream Hlin(f) values in linear scale. Each array entry represents the Hlin(f = i*HLINGus* delta(f)) value for a particular subcarrier group index i, ranging from 0 to MIN(NSCus - 1,511). The Hlin(f) is represented as ((scale/2(exp15))*((a(i) + j*b(i))/2(exp15))), with scale being coded as a 16-bit unsigned integer and, a(i) and b(i) coded as 16-bit 2s complement signed integers in the (-2(exp15) + 1) to (+2(exp15) - 1) range. A special value a(i) = b(i) = -2(exp15) indicates that no measurement could be done for this subcarrier group because it is out of the passband or that the attenuation is out of range to be represented. This parameter is only available after a loop diagnostic procedure." REFERENCE "G997.1 chapter 7.5.1.18.6" ::= { sheAdslAtucPhysEntry 21 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.10.1.22 sheAdslAtucPhysDeltHLOGMTus OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "DELT-related parameter that provides the number of symbols used to measure the upstream Hlog(f). (Not available for ADSL but ADSL2 & ADSL2plus)." REFERENCE "G997.1 chapter 7.5.1.18.7" ::= { sheAdslAtucPhysEntry 22 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.10.1.23 sheAdslAtucPhysDeltHLOGpsus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "DELT-related parameter that provides an array of real upstream Hlog(f) values in dB. (Not available for ADSL but ADSL2 & ADSL2plus). This parameter is an array of real upstream Hlog(f) values in dB. Each array entry represents the real Hlog(f = i*HLOGGus* delta(f)) value for a particular subcarrier group sub-carrier index i, ranging from 0 to MIN(NSCus - 1,511). The real Hlog(f) value is represented as (6 - m(i)/10), with m(i) 10-bit unsigned integer in the 0 to 1022 range. A special value m = 1023 indicates that no measurement could be done for this subcarrier group because it is out of the passband or that the attenuation is out of range to be represented." REFERENCE "G997.1 chapter 7.5.1.18.8" ::= { sheAdslAtucPhysEntry 23 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.10.1.24 sheAdslAtucPhysDeltQLNMTus OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "DELT-related parameter that provides the number of symbols used to measure the upstream QLN(f) values. (Not available for ADSL but ADSL2 & ADSL2plus)." REFERENCE "G997.1 chapter 7.5.1.19.3" ::= { sheAdslAtucPhysEntry 24 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.10.1.25 sheAdslAtucPhysDeltQLNpsus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "DELT-related parameter that provides an array of real upstream QLN(f) values in dBm/Hz. Every two octects refer to one element in this array of octets. (Not available for ADSL but ADSL2 & ADSL2plus) This parameter is an array of real upstream QLN(f) values in dBm/Hz. Each array entry represents the QLN(f = i*QLNGus* delta(f)) value for a particular subcarrier group index i, ranging from 0 to MIN(NSCus - 1,511). The QLN(f) is represented as (-23 - n(i)/2), with n(i) an 8-bit unsigned integer in the 0 to 254 range. A special value n(i) = 255 indicates that no measurement could be done for this subcarrier group because it is out of the passband or that the noise PSD is out of range to be represented." REFERENCE "G997.1 chapter 7.5.1.19.4" ::= { sheAdslAtucPhysEntry 25 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.10.1.26 sheAdslAtucPhysActState OBJECT-TYPE SYNTAX SheAdslLineActStateType MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the result of the ATU's line activation. Values include no error etc." ::= { sheAdslAtucPhysEntry 26 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.10.1.27 sheAdslAtucPhysCurrentBinStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..512)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter represent the current bin status of used subcarriers. Each octet map to the corresponding bin." ::= { sheAdslAtucPhysEntry 27 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.10.1.28 sheAdslAtucPhysCurrentBinBitLoading OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter represent the current used bit loading per bin in upstream direction. Each octet map to the corresponding bin." ::= { sheAdslAtucPhysEntry 28 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.10.1.29 sheAdslAtucPhysDeltSNRMTus OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "DELT-related parameter that provides the number of symbols used to measure the upstream SNR(f) values. (Not available for ADSL and ADSL2plus) It is represented as a 16-bit unsigned value. After a loop diagnostic procedure, this parameter shall contain the number of symbols used to generate the associate parameter. It should correspond to the value specified in the Recommendation (e.g., the number of symbols in 1 s time interval for G.992.3)." ::= { sheAdslAtucPhysEntry 29 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.10.1.30 sheAdslAtucPhysDeltDMTBinSNRus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "DELT-related parameter that provides an array of real upstream SNR(f) values in dB (Not available for ADSL and ADSL2plus) It is coded in the same way as the related downstream parameter." ::= { sheAdslAtucPhysEntry 30 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.10.1.31 sheAdslAtucPhysDeltLastTxState OBJECT-TYPE SYNTAX SheAdslPhysAtucDeltLastTxStateType MAX-ACCESS read-only STATUS current DESCRIPTION "DELT-related parameter that provides last successful transmitted initialization state by the ATU-C. (Not available for ADSL and ADSL2plus) Initialization states are defined in the individual ADSL Recommendations and are counted from 0 (if G.994.1 is used) or 1 (if G.994.1 is not used) up to Showtime. This parameter must be interpreted along with the ADSL Transmission System. This parameter is available only when, after a failed full initialization, the line diagnostics procedures are activated on the line. Line diagnostics procedures can be activated by the operator of the system (through the Line State Forced line configuration parameter) or autonomously by the ATU-C or ATU-R." ::= { sheAdslAtucPhysEntry 31 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.10.1.32 sheAdslAtucPhysDeltSATNus OBJECT-TYPE SYNTAX Unsigned32 (0..1270) UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "DELT-related parameter that provides the uptream signal attenuation (length = 4 bytes). (Not available for ADSL and ADSL2plus). This parameter is the measured difference in dB in the total power transmitted by the ATU-R and the total power received by the ATU-C over all subcarriers during showtime. The upstream line attenuation ranges from 0 to +127 dB with 0.1 dB steps. A special value indicates the line attenuation is out of range to be represented. NOTE: During showtime, only a subset of the subcarriers may be transmitted by the ATU-R, as compared to diagnostics mode and initialization. Therefore, the upstream Signal attenuation may be significantly lower than the upstream Line attenuation." ::= { sheAdslAtucPhysEntry 32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.11 sheAdslAtucChanTable OBJECT-TYPE SYNTAX SEQUENCE OF SheAdslAtucChanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides one row for each ATUC channel." ::= { sheAdslLineMIB 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.11.1 sheAdslAtucChanEntry OBJECT-TYPE SYNTAX SheAdslAtucChanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the adslAtucChanTable. This table is only supported by NE releases smaller then R2.5 (NO dualLatency support)!!" INDEX { ifIndex } ::= { sheAdslAtucChanTable 1 } SheAdslAtucChanEntry ::= SEQUENCE { sheAdslAtucChanInterleaveDelay Gauge32, sheAdslAtucChanCurrTxRate Gauge32, sheAdslAtucChanPrevTxRate Gauge32, sheAdslAtucChanCrcBlockLength Gauge32, sheAdslAtucChanCurrAtmStatus SheAdslLineAtmStatus, sheAdslAtucChanRsSymbols Unsigned32, sheAdslAtucChanRsDepth Unsigned32, sheAdslAtucChanRsRedundancy Unsigned32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.11.1.1 sheAdslAtucChanInterleaveDelay OBJECT-TYPE SYNTAX Gauge32 UNITS "milli-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. Larger numbers provide greater separation between consecutive input bytes in the output bit stream allowing for improved impulse noise immunity at the expense of payload latency. In the case where the ifType is Fast(125), use noSuchObject." ::= { sheAdslAtucChanEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.11.1.2 sheAdslAtucChanCurrTxRate OBJECT-TYPE SYNTAX Gauge32 (1..32736) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual transmit rate on this channel." ::= { sheAdslAtucChanEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.11.1.3 sheAdslAtucChanPrevTxRate OBJECT-TYPE SYNTAX Gauge32 (1..32736) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at the time of the last adslAtucRateChangeTrap event. It is also set at initialization to prevent a trap being sent. Rate changes less than adslAtucThresh(*)RateDown or less than adslAtucThresh(*)RateUp will not cause a trap or cause this object to change. (*) == Fast or Interleave. See AdslLineAlarmConfProfileEntry." ::= { sheAdslAtucChanEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.11.1.4 sheAdslAtucChanCrcBlockLength OBJECT-TYPE SYNTAX Gauge32 UNITS "byte" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the length of the channel data-block on which the CRC operates. Refer to Line Code Specific MIBs, [11] and [12] for more information." ::= { sheAdslAtucChanEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.11.1.5 sheAdslAtucChanCurrAtmStatus OBJECT-TYPE SYNTAX SheAdslLineAtmStatus MAX-ACCESS read-only STATUS current DESCRIPTION "indicates an ncd or lcd failure if the counter surpasses 127. If neither ATM counter surpasses 127, the return value will be 'NoAtmDefect'. noAtmDefect(0), noCellDeleniation(1), lossOfCellDeleniation(2) " ::= { sheAdslAtucChanEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.11.1.6 sheAdslAtucChanRsSymbols OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates number of DMT symbols per Reed-Solomon code word (S) in the downstream direction. Note that S is not restricted to interleaved mode only. Even in fast mode, S is a valid constant value and is equal to 1." ::= { sheAdslAtucChanEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.11.1.7 sheAdslAtucChanRsDepth OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates interleaving depth (D) in the downstream direction. Note that D is not restricted to interleaved mode only. Even in fast mode, D is a valid constant value and is equal to 1." ::= { sheAdslAtucChanEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.11.1.8 sheAdslAtucChanRsRedundancy OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates number of redundant bytes (R) per Reed-Solomon code in the downstream direction." ::= { sheAdslAtucChanEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12 sheAdslAtucPerfDataTable OBJECT-TYPE SYNTAX SEQUENCE OF SheAdslAtucPerfDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides one row for each ATUC. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94)." ::= { sheAdslLineMIB 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1 sheAdslAtucPerfDataEntry OBJECT-TYPE SYNTAX SheAdslAtucPerfDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in adslAtucPerfDataTable." INDEX { ifIndex } ::= { sheAdslAtucPerfDataTable 1 } SheAdslAtucPerfDataEntry ::= SEQUENCE { sheAdslAtucPerfDataLofs Counter32, sheAdslAtucPerfDataLoss Counter32, sheAdslAtucPerfDataLols Counter32, sheAdslAtucPerfDataLprs Counter32, sheAdslAtucPerfDataESs Counter32, sheAdslAtucPerfDataInits Counter32, sheAdslAtucPerfDataStatFastR Gauge32, sheAdslAtucPerfDataStatFailedFastR Gauge32, sheAdslAtucPerfDataStatSesL Gauge32, sheAdslAtucPerfDataStatUasL Gauge32, sheAdslAtucPerfDataValidIntervals INTEGER, sheAdslAtucPerfDataInvalidIntervals INTEGER, sheAdslAtucPerfDataCurr15MinTimeElapsed AdslPerfTimeElapsed, sheAdslAtucPerfDataCurr15MinLofs PerfCurrentCount, sheAdslAtucPerfDataCurr15MinLoss PerfCurrentCount, sheAdslAtucPerfDataCurr15MinLols PerfCurrentCount, sheAdslAtucPerfDataCurr15MinLprs PerfCurrentCount, sheAdslAtucPerfDataCurr15MinESs PerfCurrentCount, sheAdslAtucPerfDataCurr15MinInits PerfCurrentCount, sheAdslAtucPerfDataCurr15MinFastR Gauge32, sheAdslAtucPerfDataCurr15MinFailedFastR Gauge32, sheAdslAtucPerfDataCurr15MinSesL Gauge32, sheAdslAtucPerfDataCurr15MinUasL Gauge32, sheAdslAtucPerfDataCurr1DayTimeElapsed AdslPerfTimeElapsed, sheAdslAtucPerfDataCurr1DayLofs AdslPerfCurrDayCount, sheAdslAtucPerfDataCurr1DayLoss AdslPerfCurrDayCount, sheAdslAtucPerfDataCurr1DayLols AdslPerfCurrDayCount, sheAdslAtucPerfDataCurr1DayLprs AdslPerfCurrDayCount, sheAdslAtucPerfDataCurr1DayESs AdslPerfCurrDayCount, sheAdslAtucPerfDataCurr1DayInits AdslPerfCurrDayCount, sheAdslAtucPerfDataCurr1DayFastR Gauge32, sheAdslAtucPerfDataCurr1DayFailedFastR Gauge32, sheAdslAtucPerfDataCurr1DaySesL Gauge32, sheAdslAtucPerfDataCurr1DayUasL Gauge32, sheAdslAtucPerfDataPrev1DayTimeElapsed Gauge32, sheAdslAtucPerfDataPrev1DayMoniSecs INTEGER, sheAdslAtucPerfDataPrev1DayLofs AdslPerfPrevDayCount, sheAdslAtucPerfDataPrev1DayLoss AdslPerfPrevDayCount, sheAdslAtucPerfDataPrev1DayLols AdslPerfPrevDayCount, sheAdslAtucPerfDataPrev1DayLprs AdslPerfPrevDayCount, sheAdslAtucPerfDataPrev1DayESs AdslPerfPrevDayCount, sheAdslAtucPerfDataPrev1DayInits AdslPerfPrevDayCount, sheAdslAtucPerfDataPrev1DayFastR Gauge32, sheAdslAtucPerfDataPrev1DayFailedFastR Gauge32, sheAdslAtucPerfDataPrev1DaySesL Gauge32, sheAdslAtucPerfDataPrev1DayUasL Gauge32 } -- Event Counters -- -- Also see adslAtucIntervalTable for 15 minute interval -- elapsed counters. -- -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.1 sheAdslAtucPerfDataLofs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of Loss of Framing failures since agent reset." ::= { sheAdslAtucPerfDataEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.2 sheAdslAtucPerfDataLoss OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of Loss of Signal failures since agent reset." ::= { sheAdslAtucPerfDataEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.3 sheAdslAtucPerfDataLols OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of Loss of Link failures since agent reset." ::= { sheAdslAtucPerfDataEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.4 sheAdslAtucPerfDataLprs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of Loss of Power failures since agent reset." ::= { sheAdslAtucPerfDataEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.5 sheAdslAtucPerfDataESs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of Errored Seconds since agent reset. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects." ::= { sheAdslAtucPerfDataEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.6 sheAdslAtucPerfDataInits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the line initialization attempts since agent reset. Includes both successful and failed attempts." ::= { sheAdslAtucPerfDataEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.7 sheAdslAtucPerfDataStatFastR OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object indicates the count of fast retrains." REFERENCE "ITU G.997.1 Section 7.4.15.1" ::= { sheAdslAtucPerfDataEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.8 sheAdslAtucPerfDataStatFailedFastR OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object indicates the count of failed fast retrains." REFERENCE "ITU G.997.1 Section 7.4.15.2" ::= { sheAdslAtucPerfDataEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.9 sheAdslAtucPerfDataStatSesL OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object indicates the count of severely errored second line." REFERENCE " ITU G.997.1 Section 7.2.1.1.7" ::= { sheAdslAtucPerfDataEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.10 sheAdslAtucPerfDataStatUasL OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object indicates the count of unavailable errored seconds." REFERENCE " ITU G.997.1 Section 7.2.1.1.9" ::= { sheAdslAtucPerfDataEntry 10 } -- general 15 min interval information -- -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.11 sheAdslAtucPerfDataValidIntervals OBJECT-TYPE SYNTAX INTEGER (0..96) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of previous 15-minute intervals in the interval table for which data was collected. Given that is the maximum # of intervals supported. The value will be unless the measurement was (re-)started within the last (*15) minutes, in which case the value will be the number of complete 15 minute intervals for which the agent has at least some data. In certain cases (e.g., in the case where the agent is a proxy) it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available." ::= { sheAdslAtucPerfDataEntry 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.12 sheAdslAtucPerfDataInvalidIntervals OBJECT-TYPE SYNTAX INTEGER (0..96) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of intervals in the range from 0 to the value of adslAtucPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations)." ::= { sheAdslAtucPerfDataEntry 12 } -- 15 min current performance group -- -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.13 sheAdslAtucPerfDataCurr15MinTimeElapsed OBJECT-TYPE SYNTAX AdslPerfTimeElapsed (0..899) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Total elapsed seconds in this interval." ::= { sheAdslAtucPerfDataEntry 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.14 sheAdslAtucPerfDataCurr15MinLofs OBJECT-TYPE SYNTAX PerfCurrentCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the current 15 minute interval when there was Loss of Framing." ::= { sheAdslAtucPerfDataEntry 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.15 sheAdslAtucPerfDataCurr15MinLoss OBJECT-TYPE SYNTAX PerfCurrentCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the current 15 minute interval when there was Loss of Signal." ::= { sheAdslAtucPerfDataEntry 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.16 sheAdslAtucPerfDataCurr15MinLols OBJECT-TYPE SYNTAX PerfCurrentCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the current 15 minute interval when there was Loss of Link." ::= { sheAdslAtucPerfDataEntry 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.17 sheAdslAtucPerfDataCurr15MinLprs OBJECT-TYPE SYNTAX PerfCurrentCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the current 15 minute interval when there was Loss of Power." ::= { sheAdslAtucPerfDataEntry 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.18 sheAdslAtucPerfDataCurr15MinESs OBJECT-TYPE SYNTAX PerfCurrentCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Errored Seconds in the current 15 minute interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects." ::= { sheAdslAtucPerfDataEntry 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.19 sheAdslAtucPerfDataCurr15MinInits OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the line initialization attempts in the current 15 minute interval. Includes both successful and failed attempts." ::= { sheAdslAtucPerfDataEntry 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.20 sheAdslAtucPerfDataCurr15MinFastR OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the current 15 minute interval when there was fast retrains. REFERENCE ITU G.997.1 Section 7.4.15.1" ::= { sheAdslAtucPerfDataEntry 20 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.21 sheAdslAtucPerfDataCurr15MinFailedFastR OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the current 15 minute interval when there was failed fast retrains. REFERENCE ITU G.997.1 Section 7.4.15.2" ::= { sheAdslAtucPerfDataEntry 21 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.22 sheAdslAtucPerfDataCurr15MinSesL OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the current 15 minute interval when there was severely errored seconds. REFERENCE ITU G.997.1 Section 7.2.1.1.7" ::= { sheAdslAtucPerfDataEntry 22 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.23 sheAdslAtucPerfDataCurr15MinUasL OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the current 15 minute interval when there was count for unavailable errored seconds. REFERENCE ITU G.997.1 Section 7.2.1.1.9" ::= { sheAdslAtucPerfDataEntry 23 } -- 1-day current and previous performance group -- -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.24 sheAdslAtucPerfDataCurr1DayTimeElapsed OBJECT-TYPE SYNTAX AdslPerfTimeElapsed (0..86399) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds that have elapsed since the beginning of the current 1-day interval." ::= { sheAdslAtucPerfDataEntry 24 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.25 sheAdslAtucPerfDataCurr1DayLofs OBJECT-TYPE SYNTAX AdslPerfCurrDayCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds when there was Loss of Framing during the current day as measured by adslAtucPerfCurr1DayTimeElapsed." ::= { sheAdslAtucPerfDataEntry 25 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.26 sheAdslAtucPerfDataCurr1DayLoss OBJECT-TYPE SYNTAX AdslPerfCurrDayCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds when there was Loss of Signal during the current day as measured by adslAtucPerfCurr1DayTimeElapsed." ::= { sheAdslAtucPerfDataEntry 26 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.27 sheAdslAtucPerfDataCurr1DayLols OBJECT-TYPE SYNTAX AdslPerfCurrDayCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds when there was Loss of Link during the current day as measured by adslAtucPerfCurr1DayTimeElapsed." ::= { sheAdslAtucPerfDataEntry 27 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.28 sheAdslAtucPerfDataCurr1DayLprs OBJECT-TYPE SYNTAX AdslPerfCurrDayCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds when there was Loss of Power during the current day as measured by adslAtucPerfCurr1DayTimeElapsed." ::= { sheAdslAtucPerfDataEntry 28 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.29 sheAdslAtucPerfDataCurr1DayESs OBJECT-TYPE SYNTAX AdslPerfCurrDayCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Errored Seconds during the current day as measured by adslAtucPerfCurr1DayTimeElapsed. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects." ::= { sheAdslAtucPerfDataEntry 29 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.30 sheAdslAtucPerfDataCurr1DayInits OBJECT-TYPE SYNTAX AdslPerfCurrDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the line initialization attempts in the day as measured by adslAtucPerfCurr1DayTimeElapsed. Includes both successful and failed attempts." ::= { sheAdslAtucPerfDataEntry 30 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.31 sheAdslAtucPerfDataCurr1DayFastR OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds when there was fast retrains during the current day as measured by adslAtucPerfCurr1Day TimeElapsed. REFERENCE ITU G.997.1 Section 7.4.15.1" ::= { sheAdslAtucPerfDataEntry 31 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.32 sheAdslAtucPerfDataCurr1DayFailedFastR OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds when there was failed fast retrains during the current day as measured by adslAtucPerfCurr1Day TimeElapsed.REFERENCE ITU G.997.1 Section 7.4.15.2" ::= { sheAdslAtucPerfDataEntry 32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.33 sheAdslAtucPerfDataCurr1DaySesL OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds when there was Severely Errored Seconds during the current day as measured by adslAtucPerfCurr1DayTimeElapsed. REFERENCE ITU G.997.1 Section 7.2.1.1.7" ::= { sheAdslAtucPerfDataEntry 33 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.34 sheAdslAtucPerfDataCurr1DayUasL OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds when there was Unavailable Errored Seconds during the current day as measured by adslAtucPerfCurr1DayTimeElapsed. REFERENCE ITU G.997.1 Section 7.2.1.1.9" ::= { sheAdslAtucPerfDataEntry 34 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.35 sheAdslAtucPerfDataPrev1DayTimeElapsed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total elapsed seconds in this interval in seconds." ::= { sheAdslAtucPerfDataEntry 35 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.36 sheAdslAtucPerfDataPrev1DayMoniSecs OBJECT-TYPE SYNTAX INTEGER (0..86400) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monitoring data could not be collected for any reason." ::= { sheAdslAtucPerfDataEntry 36 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.37 sheAdslAtucPerfDataPrev1DayLofs OBJECT-TYPE SYNTAX AdslPerfPrevDayCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when there was Loss of Framing within the most recent previous 1-day period." ::= { sheAdslAtucPerfDataEntry 37 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.38 sheAdslAtucPerfDataPrev1DayLoss OBJECT-TYPE SYNTAX AdslPerfPrevDayCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when there was Loss of Signal within the most recent previous 1-day period." ::= { sheAdslAtucPerfDataEntry 38 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.39 sheAdslAtucPerfDataPrev1DayLols OBJECT-TYPE SYNTAX AdslPerfPrevDayCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when there was Loss of Link within the most recent previous 1-day period." ::= { sheAdslAtucPerfDataEntry 39 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.40 sheAdslAtucPerfDataPrev1DayLprs OBJECT-TYPE SYNTAX AdslPerfPrevDayCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when there was Loss of Power within the most recent previous 1-day period." ::= { sheAdslAtucPerfDataEntry 40 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.41 sheAdslAtucPerfDataPrev1DayESs OBJECT-TYPE SYNTAX AdslPerfPrevDayCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Errored Seconds within the most recent previous 1-day period. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects." ::= { sheAdslAtucPerfDataEntry 41 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.42 sheAdslAtucPerfDataPrev1DayInits OBJECT-TYPE SYNTAX AdslPerfPrevDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the line initialization attempts in the most recent previous 1-day period. Includes both successful and failed attempts." ::= { sheAdslAtucPerfDataEntry 42 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.43 sheAdslAtucPerfDataPrev1DayFastR OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when there was fast retrains within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.4.15.1" ::= { sheAdslAtucPerfDataEntry 43 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.44 sheAdslAtucPerfDataPrev1DayFailedFastR OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when there was failed fast retrains within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.4.15.2" ::= { sheAdslAtucPerfDataEntry 44 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.45 sheAdslAtucPerfDataPrev1DaySesL OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when there was severely errored seconds within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.2.1.1.7" ::= { sheAdslAtucPerfDataEntry 45 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.12.1.46 sheAdslAtucPerfDataPrev1DayUasL OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when there was unavailable errored seconds within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.2.1.1.9" ::= { sheAdslAtucPerfDataEntry 46 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.13 sheAdslAtucIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF SheAdslAtucIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides one row for each ATUC performance data collection interval. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94)." ::= { sheAdslLineMIB 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.13.1 sheAdslAtucIntervalEntry OBJECT-TYPE SYNTAX SheAdslAtucIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the adslAtucIntervalTable." INDEX { ifIndex, sheAdslAtucIntervalNumber } ::= { sheAdslAtucIntervalTable 1 } SheAdslAtucIntervalEntry ::= SEQUENCE { sheAdslAtucIntervalNumber INTEGER, sheAdslAtucIntervalValidData TruthValue, sheAdslAtucIntervalEndTime Unsigned32, sheAdslAtucIntervalLofs PerfIntervalCount, sheAdslAtucIntervalLoss PerfIntervalCount, sheAdslAtucIntervalLols PerfIntervalCount, sheAdslAtucIntervalLprs PerfIntervalCount, sheAdslAtucIntervalESs PerfIntervalCount, sheAdslAtucIntervalInits PerfIntervalCount, sheAdslAtucIntervalFastR Gauge32, sheAdslAtucIntervalFailedFastR Gauge32, sheAdslAtucIntervalSesL Gauge32, sheAdslAtucIntervalUasL Gauge32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.13.1.1 sheAdslAtucIntervalNumber OBJECT-TYPE SYNTAX INTEGER (1..96) MAX-ACCESS read-only STATUS current DESCRIPTION "Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional." ::= { sheAdslAtucIntervalEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.13.1.2 sheAdslAtucIntervalValidData OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates if the data for this interval is valid." ::= { sheAdslAtucIntervalEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.13.1.3 sheAdslAtucIntervalEndTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the time of storing this interval." ::= { sheAdslAtucIntervalEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.13.1.4 sheAdslAtucIntervalLofs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when there was Loss of Framing." ::= { sheAdslAtucIntervalEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.13.1.5 sheAdslAtucIntervalLoss OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when there was Loss of Signal." ::= { sheAdslAtucIntervalEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.13.1.6 sheAdslAtucIntervalLols OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when there was Loss of Link." ::= { sheAdslAtucIntervalEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.13.1.7 sheAdslAtucIntervalLprs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when there was Loss of Power." ::= { sheAdslAtucIntervalEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.13.1.8 sheAdslAtucIntervalESs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Errored Seconds in the interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects." ::= { sheAdslAtucIntervalEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.13.1.9 sheAdslAtucIntervalInits OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the line initialization attempts during the interval. Includes both successful and failed attempts." ::= { sheAdslAtucIntervalEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.13.1.10 sheAdslAtucIntervalFastR OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates Count of seconds in the interval when there was Fast Retrains." ::= { sheAdslAtucIntervalEntry 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.13.1.11 sheAdslAtucIntervalFailedFastR OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates Count of seconds in the interval when there was Failed Fast Retrains." ::= { sheAdslAtucIntervalEntry 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.13.1.12 sheAdslAtucIntervalSesL OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates Count of seconds in the interval when there was severely errored seconds." ::= { sheAdslAtucIntervalEntry 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.13.1.13 sheAdslAtucIntervalUasL OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates Count of seconds in the interval when there was unavailable errored seconds." ::= { sheAdslAtucIntervalEntry 13 } -- performance group -- -- Note: block is intended to be the length of the channel -- data-block on which the CRC operates. See -- adslAtucChanCrcBlockLength for more information. -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14 sheAdslAtucChanPerfDataTable OBJECT-TYPE SYNTAX SEQUENCE OF SheAdslAtucChanPerfDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides one row for each ATUC channel." ::= { sheAdslLineMIB 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14.1 sheAdslAtucChanPerfDataEntry OBJECT-TYPE SYNTAX SheAdslAtucChanPerfDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in adslAtucChanPerfDataTable. This table is only supported by NE releases smaller then R2.5 (NO dualLatency support)!!" INDEX { ifIndex } ::= { sheAdslAtucChanPerfDataTable 1 } SheAdslAtucChanPerfDataEntry ::= SEQUENCE { sheAdslAtucChanPerfDataTimeElapsed Gauge32, sheAdslAtucChanPerfDataReceivedBlks Counter32, sheAdslAtucChanPerfDataTransmittedBlks Counter32, sheAdslAtucChanPerfDataCorrectedBlks Counter32, sheAdslAtucChanPerfDataUncorrectBlks Counter32, sheAdslAtucChanPerfDataNcd Gauge32, sheAdslAtucChanPerfDataOcd Gauge32, sheAdslAtucChanPerfDataHec Gauge32, sheAdslAtucChanPerfDataValidIntervals INTEGER, sheAdslAtucChanPerfDataInvalidIntervals INTEGER, sheAdslAtucChanPerfDataCurr15MinTimeElapsed AdslPerfTimeElapsed, sheAdslAtucChanPerfDataCurr15MinReceivedBlks PerfCurrentCount, sheAdslAtucChanPerfDataCurr15MinTransmittedBlks PerfCurrentCount, sheAdslAtucChanPerfDataCurr15MinCorrectedBlks PerfCurrentCount, sheAdslAtucChanPerfDataCurr15MinUncorrectBlks PerfCurrentCount, sheAdslAtucChanPerfDataCurr15MinNcd Gauge32, sheAdslAtucChanPerfDataCurr15MinOcd Gauge32, sheAdslAtucChanPerfDataCurr15MinHec Gauge32, sheAdslAtucChanPerfDataCurr1DayTimeElapsed AdslPerfTimeElapsed, sheAdslAtucChanPerfDataCurr1DayReceivedBlks AdslPerfCurrDayCount, sheAdslAtucChanPerfDataCurr1DayTransmittedBlks AdslPerfCurrDayCount, sheAdslAtucChanPerfDataCurr1DayCorrectedBlks AdslPerfCurrDayCount, sheAdslAtucChanPerfDataCurr1DayUncorrectBlks AdslPerfCurrDayCount, sheAdslAtucChanPerfDataCurr1DayNcd Gauge32, sheAdslAtucChanPerfDataCurr1DayOcd Gauge32, sheAdslAtucChanPerfDataCurr1DayHec Gauge32, sheAdslAtucChanPerfDataPrev1DayMoniSecs INTEGER, sheAdslAtucChanPerfDataPrev1DayReceivedBlks AdslPerfPrevDayCount, sheAdslAtucChanPerfDataPrev1DayTransmittedBlks AdslPerfPrevDayCount, sheAdslAtucChanPerfDataPrev1DayCorrectedBlks AdslPerfPrevDayCount, sheAdslAtucChanPerfDataPrev1DayUncorrectBlks AdslPerfPrevDayCount, sheAdslAtucChanPerfDataPrev1DayNcd Gauge32, sheAdslAtucChanPerfDataPrev1DayOcd Gauge32, sheAdslAtucChanPerfDataPrev1DayHec Gauge32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14.1.1 sheAdslAtucChanPerfDataTimeElapsed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION " Total elapsed seconds in this interval." ::= { sheAdslAtucChanPerfDataEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14.1.2 sheAdslAtucChanPerfDataReceivedBlks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks received on this channel since agent reset." ::= { sheAdslAtucChanPerfDataEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14.1.3 sheAdslAtucChanPerfDataTransmittedBlks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks transmitted on this channel since agent reset." ::= { sheAdslAtucChanPerfDataEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14.1.4 sheAdslAtucChanPerfDataCorrectedBlks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with errors that were corrected since agent reset. These blocks are passed on as good data." ::= { sheAdslAtucChanPerfDataEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14.1.5 sheAdslAtucChanPerfDataUncorrectBlks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with uncorrectable errors since agent reset." ::= { sheAdslAtucChanPerfDataEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14.1.6 sheAdslAtucChanPerfDataNcd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of no cell delineation(ncd) on this channel." ::= { sheAdslAtucChanPerfDataEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14.1.7 sheAdslAtucChanPerfDataOcd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of out of cell delineation (ocd) on this channel." ::= { sheAdslAtucChanPerfDataEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14.1.8 sheAdslAtucChanPerfDataHec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Header error check counter(hec) on this channel." ::= { sheAdslAtucChanPerfDataEntry 8 } -- general 15 min interval information -- -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14.1.9 sheAdslAtucChanPerfDataValidIntervals OBJECT-TYPE SYNTAX INTEGER (0..96) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of previous 15-minute intervals in the interval table for which data was collected. Given that is the maximum # of intervals supported. The value will be unless the measurement was (re-)started within the last (*15) minutes, in which case the value will be the number of complete 15 minute intervals for which the agent has at least some data. In certain cases (e.g., in the case where the agent is a proxy) it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available." ::= { sheAdslAtucChanPerfDataEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14.1.10 sheAdslAtucChanPerfDataInvalidIntervals OBJECT-TYPE SYNTAX INTEGER (0..96) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of intervals in the range from 0 to the value of adslAtucChanPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations)." ::= { sheAdslAtucChanPerfDataEntry 10 } -- 15 min current performance group -- -- -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14.1.11 sheAdslAtucChanPerfDataCurr15MinTimeElapsed OBJECT-TYPE SYNTAX AdslPerfTimeElapsed (0..899) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Total elapsed seconds in this interval." ::= { sheAdslAtucChanPerfDataEntry 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14.1.12 sheAdslAtucChanPerfDataCurr15MinReceivedBlks OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks received on this channel within the current 15 minute interval." ::= { sheAdslAtucChanPerfDataEntry 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14.1.13 sheAdslAtucChanPerfDataCurr15MinTransmittedBlks OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks transmitted on this channel within the current 15 minute interval." ::= { sheAdslAtucChanPerfDataEntry 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14.1.14 sheAdslAtucChanPerfDataCurr15MinCorrectedBlks OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with errors that were corrected on this channel within the current 15 minute interval." ::= { sheAdslAtucChanPerfDataEntry 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14.1.15 sheAdslAtucChanPerfDataCurr15MinUncorrectBlks OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with uncorrectable errors on this channel within the current 15 minute interval." ::= { sheAdslAtucChanPerfDataEntry 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14.1.16 sheAdslAtucChanPerfDataCurr15MinNcd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of no cell delineation(ncd) on this channel within the current 15 minute time interval." ::= { sheAdslAtucChanPerfDataEntry 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14.1.17 sheAdslAtucChanPerfDataCurr15MinOcd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of out of cell delineation (ocd) on this channel within the current 15 minute time interval." ::= { sheAdslAtucChanPerfDataEntry 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14.1.18 sheAdslAtucChanPerfDataCurr15MinHec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Header error check counter(hec) on this channel within the current 15 minute time interval." ::= { sheAdslAtucChanPerfDataEntry 18 } -- 1-day current and previous performance group -- -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14.1.19 sheAdslAtucChanPerfDataCurr1DayTimeElapsed OBJECT-TYPE SYNTAX AdslPerfTimeElapsed (0..86399) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds that have elapsed since the beginning of the current 1-day interval." ::= { sheAdslAtucChanPerfDataEntry 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14.1.20 sheAdslAtucChanPerfDataCurr1DayReceivedBlks OBJECT-TYPE SYNTAX AdslPerfCurrDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks received on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed." ::= { sheAdslAtucChanPerfDataEntry 20 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14.1.21 sheAdslAtucChanPerfDataCurr1DayTransmittedBlks OBJECT-TYPE SYNTAX AdslPerfCurrDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks transmitted on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed." ::= { sheAdslAtucChanPerfDataEntry 21 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14.1.22 sheAdslAtucChanPerfDataCurr1DayCorrectedBlks OBJECT-TYPE SYNTAX AdslPerfCurrDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with errors that were corrected on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed." ::= { sheAdslAtucChanPerfDataEntry 22 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14.1.23 sheAdslAtucChanPerfDataCurr1DayUncorrectBlks OBJECT-TYPE SYNTAX AdslPerfCurrDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with uncorrectable errors on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed." ::= { sheAdslAtucChanPerfDataEntry 23 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14.1.24 sheAdslAtucChanPerfDataCurr1DayNcd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of no cell delineation (ncd) on this channel within the current 1 day time interval." ::= { sheAdslAtucChanPerfDataEntry 24 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14.1.25 sheAdslAtucChanPerfDataCurr1DayOcd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of out of cell delineation (ocd) on this channel within the current 1 day time interval." ::= { sheAdslAtucChanPerfDataEntry 25 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14.1.26 sheAdslAtucChanPerfDataCurr1DayHec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Header error check counter (hec) on this channel within the current 1 day time interval." ::= { sheAdslAtucChanPerfDataEntry 26 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14.1.27 sheAdslAtucChanPerfDataPrev1DayMoniSecs OBJECT-TYPE SYNTAX INTEGER (0..86400) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monitoring data could not be collected for any reason." ::= { sheAdslAtucChanPerfDataEntry 27 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14.1.28 sheAdslAtucChanPerfDataPrev1DayReceivedBlks OBJECT-TYPE SYNTAX AdslPerfPrevDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks received on this channel within the most recent previous 1-day period." ::= { sheAdslAtucChanPerfDataEntry 28 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14.1.29 sheAdslAtucChanPerfDataPrev1DayTransmittedBlks OBJECT-TYPE SYNTAX AdslPerfPrevDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks transmitted on this channel within the most recent previous 1-day period." ::= { sheAdslAtucChanPerfDataEntry 29 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14.1.30 sheAdslAtucChanPerfDataPrev1DayCorrectedBlks OBJECT-TYPE SYNTAX AdslPerfPrevDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with errors that were corrected on this channel within the most recent previous 1-day period." ::= { sheAdslAtucChanPerfDataEntry 30 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14.1.31 sheAdslAtucChanPerfDataPrev1DayUncorrectBlks OBJECT-TYPE SYNTAX AdslPerfPrevDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with uncorrectable errors on this channel within the most recent previous 1-day period." ::= { sheAdslAtucChanPerfDataEntry 31 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14.1.32 sheAdslAtucChanPerfDataPrev1DayNcd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of no cell delineation (ncd) on this channel within the most recent previous 1-day period." ::= { sheAdslAtucChanPerfDataEntry 32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14.1.33 sheAdslAtucChanPerfDataPrev1DayOcd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of out of cell delineation (ocd) on this channel within the most recent previous 1-day period." ::= { sheAdslAtucChanPerfDataEntry 33 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.14.1.34 sheAdslAtucChanPerfDataPrev1DayHec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Header error check counter(hec) on this channel within the most recent previous 1-day period." ::= { sheAdslAtucChanPerfDataEntry 34 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.15 sheAdslAtucChanIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF SheAdslAtucChanIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides one row for each ATUC channel's performance data collection interval." ::= { sheAdslLineMIB 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.15.1 sheAdslAtucChanIntervalEntry OBJECT-TYPE SYNTAX SheAdslAtucChanIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the adslAtucIntervalTable. This table is only supported by NE releases smaller then R2.5 (NO dualLatency support)!!" INDEX { ifIndex, sheAdslAtucChanIntervalNumber } ::= { sheAdslAtucChanIntervalTable 1 } SheAdslAtucChanIntervalEntry ::= SEQUENCE { sheAdslAtucChanIntervalNumber INTEGER, sheAdslAtucChanIntervalValidData TruthValue, sheAdslAtucChanIntervalEndTime Unsigned32, sheAdslAtucChanIntervalReceivedBlks PerfIntervalCount, sheAdslAtucChanIntervalTransmittedBlks PerfIntervalCount, sheAdslAtucChanIntervalCorrectedBlks PerfIntervalCount, sheAdslAtucChanIntervalUncorrectBlks PerfIntervalCount, sheAdslAtucChanIntervalNcd Counter32, sheAdslAtucChanIntervalOcd Counter32, sheAdslAtucChanIntervalHec Counter32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.15.1.1 sheAdslAtucChanIntervalNumber OBJECT-TYPE SYNTAX INTEGER (1..96) MAX-ACCESS read-only STATUS current DESCRIPTION "Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional." ::= { sheAdslAtucChanIntervalEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.15.1.2 sheAdslAtucChanIntervalValidData OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates if the data for this interval is valid." ::= { sheAdslAtucChanIntervalEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.15.1.3 sheAdslAtucChanIntervalEndTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the time of storing this interval." ::= { sheAdslAtucChanIntervalEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.15.1.4 sheAdslAtucChanIntervalReceivedBlks OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks received on this channel during this interval." ::= { sheAdslAtucChanIntervalEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.15.1.5 sheAdslAtucChanIntervalTransmittedBlks OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks transmitted on this channel during this interval." ::= { sheAdslAtucChanIntervalEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.15.1.6 sheAdslAtucChanIntervalCorrectedBlks OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with errors that were corrected on this channel during this interval." ::= { sheAdslAtucChanIntervalEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.15.1.7 sheAdslAtucChanIntervalUncorrectBlks OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with uncorrectable errors on this channel during this interval." ::= { sheAdslAtucChanIntervalEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.15.1.8 sheAdslAtucChanIntervalNcd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates count of no cell delineation on this channel for this interval." ::= { sheAdslAtucChanIntervalEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.15.1.9 sheAdslAtucChanIntervalOcd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates count of out cell delineation on this channel for this interval." ::= { sheAdslAtucChanIntervalEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.15.1.10 sheAdslAtucChanIntervalHec OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates Header error check counter on this channel during this interval." ::= { sheAdslAtucChanIntervalEntry 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.16 sheAdslAturPhysTable OBJECT-TYPE SYNTAX SEQUENCE OF SheAdslAturPhysEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides one row for each ATUR Each row contains the Physical Layer Parameters table for that ATUR. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94)." ::= { sheAdslLineMIB 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.16.1 sheAdslAturPhysEntry OBJECT-TYPE SYNTAX SheAdslAturPhysEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the adslAturPhysTable." INDEX { ifIndex } ::= { sheAdslAturPhysTable 1 } SheAdslAturPhysEntry ::= SEQUENCE { sheAdslAturPhysInvSerialNumber SnmpAdminString, sheAdslAturPhysInvVendorID SnmpAdminString, sheAdslAturPhysInvVersionNumber SnmpAdminString, sheAdslAturPhysCurrSnrMgn INTEGER, sheAdslAturPhysCurrAtn Gauge32, sheAdslAturPhysCurrStatus SheAdslLineCurrentStatusType, sheAdslAturPhysCurrOutputPwr INTEGER, sheAdslAturPhysCurrAttainableRate Gauge32, sheAdslAturPhysConfig OCTET STRING, sheAdslAturPhysDeltHLINSCds Unsigned32, sheAdslAturPhysDeltHLINpsds OCTET STRING, sheAdslAturPhysDeltHLOGMTds Unsigned32, sheAdslAturPhysDeltHLOGpsds OCTET STRING, sheAdslAturPhysDeltQLNMTds Unsigned32, sheAdslAturPhysDeltQLNpsds OCTET STRING, sheAdslAturPhysCurrentBinBitLoading OCTET STRING, sheAdslAturPhysDeltSNRMTds Unsigned32, sheAdslAturPhysDeltDMTBinSNRds OCTET STRING, sheAdslAturPhysDeltLastTxState SheAdslPhysAturDeltLastTxStateType, sheAdslAturPhysDeltSATNds Unsigned32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.16.1.1 sheAdslAturPhysInvSerialNumber OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor specific string that identifies the vendor equipment." ::= { sheAdslAturPhysEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.16.1.2 sheAdslAturPhysInvVendorID OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor ID code is a copy of the binary vendor identification field defined by the PHY[10] and expressed as readable characters." REFERENCE "ANSI T1.413" ::= { sheAdslAturPhysEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.16.1.3 sheAdslAturPhysInvVersionNumber OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor specific version number sent by this ATU as part of the initialization messages. It is a copy of the binary version number field defined by the PHY[10] and expressed as readable characters." REFERENCE "ANSI T1.413" ::= { sheAdslAturPhysEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.16.1.4 sheAdslAturPhysCurrSnrMgn OBJECT-TYPE SYNTAX INTEGER (-640..640) UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Noise Margin as seen by this ATU with respect to its received signal in tenth dB." ::= { sheAdslAturPhysEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.16.1.5 sheAdslAturPhysCurrAtn OBJECT-TYPE SYNTAX Gauge32 (0..630) UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Measured difference in the total power transmitted by the peer ATU and the total power received by this ATU." ::= { sheAdslAturPhysEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.16.1.6 sheAdslAturPhysCurrStatus OBJECT-TYPE SYNTAX SheAdslLineCurrentStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates current state of the ATUR line. This is a bit-map of possible conditions. Due to the isolation of the ATUR when line problems occur, many state conditions like loss of power, loss of quality signal, and initialization errors, can not be determined. While trouble shooting ATUR, also use object, adslAtucCurrStatus. The various bit positions are: 0 noDefect There no defects on the line 1 lossOfFraming ATUR failure due to not receiving valid frame 2 lossOfSignal ATUR failure due to not receiving signal 3 lossOfPower ATUR failure due to loss of power 4 lossOfSignalQuality Loss of Signal Quality is declared when the Noise Margin falls below the Minimum Noise Margin, or the bit-error-rate exceeds 10^-7. This is intended to supplement ifOperStatus." ::= { sheAdslAturPhysEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.16.1.7 sheAdslAturPhysCurrOutputPwr OBJECT-TYPE SYNTAX INTEGER (-310..310) UNITS "tenth dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Measured total output power transmitted by this ATU. This is the measurement that was reported during the last activation sequence." ::= { sheAdslAturPhysEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.16.1.8 sheAdslAturPhysCurrAttainableRate OBJECT-TYPE SYNTAX Gauge32 UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum currently attainable data rate by the ATU. This value will be equal or greater than the current line rate." ::= { sheAdslAturPhysEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.16.1.9 sheAdslAturPhysConfig OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the upstream and downstream ATU-R configuration data (EOC - read 5 sec after data mode)." ::= { sheAdslAturPhysEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.16.1.10 sheAdslAturPhysDeltHLINSCds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "DELT-related parameter that provides the scale factor to be applied to the downstream Hlin(f) values. (Not available for ADSL but ADSL2 & ADSL2plus)." REFERENCE "G997.1 chapter 7.5.1.18.1" ::= { sheAdslAturPhysEntry 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.16.1.11 sheAdslAturPhysDeltHLINpsds OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..2048)) MAX-ACCESS read-only STATUS current DESCRIPTION "DELT-related parameter that provides an array of complex downstream Hlin(f) values in linear scale. Every two octects refer to one element in this array of octets. (Not available for ADSL but ADSL2 & ADSL2plus). This parameter is an array of complex downstream Hlin(f) values in linear scale. Each array entry represents the Hlin(f = i*HLINGds* delta(f)) value for a particular subcarrier group index i, ranging from 0 to MIN(NSCds - 1,511). The Hlin(f) is represented as ((scale/2(exp15))*((a(i) + j*b(i))/2(exp15))), with scale being coded as a 16-bit unsigned integer and, a(i) and b(i) coded as 16-bit 2s complement signed integers in the (-2(exp15) + 1) to (+2(exp15) - 1) range. A special value a(i) = b(i) = -2(exp15) indicates that no measurement could be done for this subcarrier group because it is out of the passband or that the attenuation is out of range to be represented. This parameter is only available after a loop diagnostic procedure." REFERENCE "G997.1 chapter 7.5.1.18.2" ::= { sheAdslAturPhysEntry 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.16.1.12 sheAdslAturPhysDeltHLOGMTds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "DELT-related parameter that provides the number of symbols used to measure the downstream Hlog(f). (Not available for ADSL but ADSL2 & ADSL2plus)." REFERENCE "G997.1 chapter 7.5.1.18.3" ::= { sheAdslAturPhysEntry 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.16.1.13 sheAdslAturPhysDeltHLOGpsds OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..1024)) MAX-ACCESS read-only STATUS current DESCRIPTION "DELT-related parameter that provides an array of real downstream Hlog(f) values in dB. (Not available for ADSL but ADSL2 & ADSL2plus). This parameter is an array of real downstream Hlog(f) values in dB. Each array entry represents the real Hlog(f = i*HLOGGds* delta(f)) value for a particular subcarrier group sub-carrier index i, ranging from 0 to MIN(NSCds - 1,511). The real Hlog(f) value is represented as (6 - m(i)/10), with m(i) 10-bit unsigned integer in the 0 to 1022 range. A special value m = 1023 indicates that no measurement could be done for this subcarrier group because it is out of the passband or that the attenuation is out of range to be represented." REFERENCE "G997.1 chapter 7.5.1.18.4" ::= { sheAdslAturPhysEntry 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.16.1.14 sheAdslAturPhysDeltQLNMTds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "DELT-related parameter that provides the number of symbols used to measure the downstream QLN(f) values. (Not available for ADSL but ADSL2 & ADSL2plus)." REFERENCE "G997.1 chapter 7.5.1.19.1" ::= { sheAdslAturPhysEntry 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.16.1.15 sheAdslAturPhysDeltQLNpsds OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..512)) MAX-ACCESS read-only STATUS current DESCRIPTION "DELT-related parameter that provides an array of real downstream QLN(f) values in dBm/Hz. Every two octects refer to one element in this array of octets. (Not available for ADSL but ADSL2 & ADSL2plus). This parameter is an array of real downstream QLN(f) values in dBm/Hz. Each array entry represents the QLN(f = i*QLNGds* delta(f)) value for a particular subcarrier group index i, ranging from 0 to MIN(NSCds - 1,511). The QLN(f) is represented as (-23 - n(i)/2), with n(i) an 8-bit unsigned integer in the 0 to 254 range. A special value n(i) = 255 indicates that no measurement could be done for this subcarrier group because it is out of the passband or that the noise PSD is out of range to be represented." REFERENCE "G997.1 chapter 7.5.1.19.2" ::= { sheAdslAturPhysEntry 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.16.1.16 sheAdslAturPhysCurrentBinBitLoading OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..512)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter represent the current used bit loading per bin in downstream direction. Each octet map to the corresponding bin." ::= { sheAdslAturPhysEntry 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.16.1.17 sheAdslAturPhysDeltSNRMTds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "DELT-related parameter that provides the number of symbols used to measure the downstream SNR(f) values. (Not available for ADSL and ADSL2plus) It is represented as a 16-bit unsigned value. After a loop diagnostic procedure, this parameter shall contain the number of symbols used to generate the associate parameter. It should correspond to the value specified in the Recommendation (e.g., the number of symbols in 1 s time interval for G.992.3)." ::= { sheAdslAturPhysEntry 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.16.1.18 sheAdslAturPhysDeltDMTBinSNRds OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..512)) MAX-ACCESS read-only STATUS current DESCRIPTION "DELT-related parameter that provides an array of real downstream SNR(f) values in dB (Not available for ADSL and ADSL2plus) Each array entry represents the SNR(f = i*f) value for a particular subcarrier index i, ranging from 0 to NSCds C 1. The SNR(f) is represented as (C32 + snr(i)/2), with snr(i) an 8-bit unsigned integer in the 0 to 254 range. A special value snr(i) = 255 indicates that no measurement could be done for the subcarrier because it is out of the passband or that the noise PSD is out of range to be represented." ::= { sheAdslAturPhysEntry 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.16.1.19 sheAdslAturPhysDeltLastTxState OBJECT-TYPE SYNTAX SheAdslPhysAturDeltLastTxStateType MAX-ACCESS read-only STATUS current DESCRIPTION "DELT-related parameter that provides last successful transmitted initialization state by the ATU-R. (Not available for ADSL and ADSL2plus) Initialization states are defined in the individual ADSL Recommendations and are counted from 0 (if G.994.1 is used) or 1 (if G.994.1 is not used) up to Showtime. This parameter must be interpreted along with the ADSL Transmission System. This parameter is available only when, after a failed full initialization, the line diagnostics procedures are activated on the line. Line diagnostics procedures can be activated by the operator of the system (through the Line State Forced line configuration parameter) or autonomously by the ATU-C or ATU-R." ::= { sheAdslAturPhysEntry 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.16.1.20 sheAdslAturPhysDeltSATNds OBJECT-TYPE SYNTAX Unsigned32 (0..1270) UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "DELT-related parameter that provides the downtream signal attenuation (length = 4 bytes). (Not available for ADSL and ADSL2plus). This parameter is the measured difference in the total power transmitted by the ATU-C and the total power received by the ATU-R over all subcarriers during showtime. The downstream line attenuation ranges from 0 to +127 dB with 0.1 dB steps. A special value indicates the line attenuation is out of range to be represented. NOTE: During showtime, only a subset of the subcarriers may be transmitted by the ATU-C, as compared to diagnostics mode and initialization. Therefore, the downstream Signal attenuation may be significantly lower than the downstream Line attenuation." ::= { sheAdslAturPhysEntry 20 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.17 sheAdslAturChanTable OBJECT-TYPE SYNTAX SEQUENCE OF SheAdslAturChanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides one row for each ATUR channel." ::= { sheAdslLineMIB 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.17.1 sheAdslAturChanEntry OBJECT-TYPE SYNTAX SheAdslAturChanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the adslAturChanTable. This table is only supported by NE releases smaller then R2.5 (NO dualLatency support)!!" INDEX { ifIndex } ::= { sheAdslAturChanTable 1 } SheAdslAturChanEntry ::= SEQUENCE { sheAdslAturChanInterleaveDelay Gauge32, sheAdslAturChanCurrTxRate Gauge32, sheAdslAturChanPrevTxRate Gauge32, sheAdslAturChanCrcBlockLength Gauge32, sheAdslAturChanCurrAtmStatus SheAdslLineAtmStatus, sheAdslAturChanRsSymbols Unsigned32, sheAdslAturChanRsDepth Unsigned32, sheAdslAturChanRsRedundancy Unsigned32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.17.1.1 sheAdslAturChanInterleaveDelay OBJECT-TYPE SYNTAX Gauge32 UNITS "milli-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. Larger numbers provide greater separation between consecutive input bytes in the output bit stream allowing for improved impulse noise immunity at the expense of payload latency. In the case where the ifType is Fast(125), use noSuchObject." ::= { sheAdslAturChanEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.17.1.2 sheAdslAturChanCurrTxRate OBJECT-TYPE SYNTAX Gauge32 (1..32736) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual transmit rate on this channel." ::= { sheAdslAturChanEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.17.1.3 sheAdslAturChanPrevTxRate OBJECT-TYPE SYNTAX Gauge32 (1..32736) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at the time of the last adslAturRateChangeTrap event. It is also set at initialization to prevent a trap being sent. Rate changes less than adslAturThresh(*)RateDown or less than adslAturThresh(*)RateUp will not cause a trap or cause this object to change. (*) == Fast or Interleave. See AdslLineAlarmConfProfileEntry." ::= { sheAdslAturChanEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.17.1.4 sheAdslAturChanCrcBlockLength OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the length of the channel data-block on which the CRC operates. Refer to Line Code Specific MIBs, [11] and [12] for more information." ::= { sheAdslAturChanEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.17.1.5 sheAdslAturChanCurrAtmStatus OBJECT-TYPE SYNTAX SheAdslLineAtmStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates an ncd or lcd failure if the counter surpasses 127. If neither ATM counter surpasses 127, the return value will be NoAtmDefect. noAtmDefect(0), noCellDeleniation(1), lossOfCellDeleniation(2) " ::= { sheAdslAturChanEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.17.1.6 sheAdslAturChanRsSymbols OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates number of DMT symbols per Reed- Solomon code word (S) in the upstream direction Note that S is not restricted to interleaved mode only. Even in fast mode, S is a valid constant value and is equal to 1." ::= { sheAdslAturChanEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.17.1.7 sheAdslAturChanRsDepth OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates interleaving depth (D) in the upstream direction Note that D is not restricted to interleaved mode only. Even in fast mode, D is a valid constant value and is equal to 1." ::= { sheAdslAturChanEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.17.1.8 sheAdslAturChanRsRedundancy OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates number of redundant bytes (R) per Reed-Solomon code in the upstream direction." ::= { sheAdslAturChanEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.18 sheAdslAturPerfDataTable OBJECT-TYPE SYNTAX SEQUENCE OF SheAdslAturPerfDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides one row for each ATUR. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94)." ::= { sheAdslLineMIB 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.18.1 sheAdslAturPerfDataEntry OBJECT-TYPE SYNTAX SheAdslAturPerfDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in adslAturPerfDataTable." INDEX { ifIndex } ::= { sheAdslAturPerfDataTable 1 } SheAdslAturPerfDataEntry ::= SEQUENCE { sheAdslAturPerfDataLofs Counter32, sheAdslAturPerfDataLoss Counter32, sheAdslAturPerfDataLprs Counter32, sheAdslAturPerfDataESs Counter32, sheAdslAturPerfDataStatSesL Counter32, sheAdslAturPerfDataStatUasL Counter32, sheAdslAturPerfDataValidIntervals INTEGER, sheAdslAturPerfDataInvalidIntervals INTEGER, sheAdslAturPerfDataCurr15MinTimeElapsed AdslPerfTimeElapsed, sheAdslAturPerfDataCurr15MinLofs PerfCurrentCount, sheAdslAturPerfDataCurr15MinLoss PerfCurrentCount, sheAdslAturPerfDataCurr15MinLprs PerfCurrentCount, sheAdslAturPerfDataCurr15MinESs PerfCurrentCount, sheAdslAturPerfDataCurr15MinSesL PerfCurrentCount, sheAdslAturPerfDataCurr15MinUasL PerfCurrentCount, sheAdslAturPerfDataCurr1DayTimeElapsed AdslPerfTimeElapsed, sheAdslAturPerfDataCurr1DayLofs AdslPerfCurrDayCount, sheAdslAturPerfDataCurr1DayLoss AdslPerfCurrDayCount, sheAdslAturPerfDataCurr1DayLprs AdslPerfCurrDayCount, sheAdslAturPerfDataCurr1DayESs AdslPerfCurrDayCount, sheAdslAturPerfDataCurr1DaySesL AdslPerfCurrDayCount, sheAdslAturPerfDataCurr1DayUasL AdslPerfCurrDayCount, sheAdslAturPerfDataPrev1DayMoniSecs INTEGER, sheAdslAturPerfDataPrev1DayLofs AdslPerfPrevDayCount, sheAdslAturPerfDataPrev1DayLoss AdslPerfPrevDayCount, sheAdslAturPerfDataPrev1DayLprs AdslPerfPrevDayCount, sheAdslAturPerfDataPrev1DayESs AdslPerfPrevDayCount, sheAdslAturPerfDataPrev1DaySesL AdslPerfPrevDayCount, sheAdslAturPerfDataPrev1DayUasL AdslPerfPrevDayCount } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.18.1.1 sheAdslAturPerfDataLofs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of Loss of Framing failures since agent reset." ::= { sheAdslAturPerfDataEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.18.1.2 sheAdslAturPerfDataLoss OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of Loss of Signal failures since agent reset." ::= { sheAdslAturPerfDataEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.18.1.3 sheAdslAturPerfDataLprs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of Loss of Power failures since agent reset." ::= { sheAdslAturPerfDataEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.18.1.4 sheAdslAturPerfDataESs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of Errored Seconds since agent reset. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects." ::= { sheAdslAturPerfDataEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.18.1.5 sheAdslAturPerfDataStatSesL OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object reports the count of severely errored second-line since the last agent reset." REFERENCE "ITU G.997.1 Section 7.2.1.1.7 " ::= { sheAdslAturPerfDataEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.18.1.6 sheAdslAturPerfDataStatUasL OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object reports the count of unavailable seconds-line since the last agent reset." REFERENCE "ITU G.997.1 Section 7.2.1.2.9 " ::= { sheAdslAturPerfDataEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.18.1.7 sheAdslAturPerfDataValidIntervals OBJECT-TYPE SYNTAX INTEGER (0..96) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of previous 15-minute intervals in the interval table for which data was collected. Given that is the maximum # of intervals supported. The value will be unless the measurement was (re-)started within the last (*15) minutes, in which case the value will be the number of complete 15 minute intervals for which the agent has at least some data. In certain cases (e.g., in the case where the agent is a proxy) it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available." ::= { sheAdslAturPerfDataEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.18.1.8 sheAdslAturPerfDataInvalidIntervals OBJECT-TYPE SYNTAX INTEGER (0..96) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of intervals in the range from 0 to the value of adslAturPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations)." ::= { sheAdslAturPerfDataEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.18.1.9 sheAdslAturPerfDataCurr15MinTimeElapsed OBJECT-TYPE SYNTAX AdslPerfTimeElapsed (0..899) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Total elapsed seconds in this interval." ::= { sheAdslAturPerfDataEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.18.1.10 sheAdslAturPerfDataCurr15MinLofs OBJECT-TYPE SYNTAX PerfCurrentCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the current 15 minute interval when there was Loss of Framing." ::= { sheAdslAturPerfDataEntry 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.18.1.11 sheAdslAturPerfDataCurr15MinLoss OBJECT-TYPE SYNTAX PerfCurrentCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the current 15 minute interval when there was Loss of Signal." ::= { sheAdslAturPerfDataEntry 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.18.1.12 sheAdslAturPerfDataCurr15MinLprs OBJECT-TYPE SYNTAX PerfCurrentCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the current 15 minute interval when there was Loss of Power." ::= { sheAdslAturPerfDataEntry 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.18.1.13 sheAdslAturPerfDataCurr15MinESs OBJECT-TYPE SYNTAX PerfCurrentCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Errored Seconds in the current 15 minute interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects." ::= { sheAdslAturPerfDataEntry 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.18.1.14 sheAdslAturPerfDataCurr15MinSesL OBJECT-TYPE SYNTAX PerfCurrentCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "For the current 15-minute interval, adslAturPerfCurr15MinSesL reports the current number of seconds during which there have been severely errored seconds-line." REFERENCE "ITU G.997.1 Section 7.2.1.2.7 " ::= { sheAdslAturPerfDataEntry 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.18.1.15 sheAdslAturPerfDataCurr15MinUasL OBJECT-TYPE SYNTAX PerfCurrentCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "For the current 15-minute interval, adslAturPerfCurr15MinUasL reports the current number of seconds during which there have been available seconds-line." REFERENCE "ITU G.997.1 Section 7.2.1.2.9 " ::= { sheAdslAturPerfDataEntry 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.18.1.16 sheAdslAturPerfDataCurr1DayTimeElapsed OBJECT-TYPE SYNTAX AdslPerfTimeElapsed (0..86399) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds that have elapsed since the beginning of the current 1-day interval." ::= { sheAdslAturPerfDataEntry 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.18.1.17 sheAdslAturPerfDataCurr1DayLofs OBJECT-TYPE SYNTAX AdslPerfCurrDayCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds when there was Loss of Framing during the current day as measured by adslAturPerfCurr1DayTimeElapsed." ::= { sheAdslAturPerfDataEntry 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.18.1.18 sheAdslAturPerfDataCurr1DayLoss OBJECT-TYPE SYNTAX AdslPerfCurrDayCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds when there was Loss of Signal during the current day as measured by adslAturPerfCurr1DayTimeElapsed." ::= { sheAdslAturPerfDataEntry 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.18.1.19 sheAdslAturPerfDataCurr1DayLprs OBJECT-TYPE SYNTAX AdslPerfCurrDayCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds when there was Loss of Power during the current day as measured by adslAturPerfCurr1DayTimeElapsed." ::= { sheAdslAturPerfDataEntry 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.18.1.20 sheAdslAturPerfDataCurr1DayESs OBJECT-TYPE SYNTAX AdslPerfCurrDayCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Errored Seconds during the current day as measured by adslAturPerfCurr1DayTimeElapsed. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects." ::= { sheAdslAturPerfDataEntry 20 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.18.1.21 sheAdslAturPerfDataCurr1DaySesL OBJECT-TYPE SYNTAX AdslPerfCurrDayCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "For the current day as measured by adslAturPerfCurr1DayTimeElapsed [RFC2662], adslAturPerfCurr1DaySesL reports the number of seconds during which there have been severely errored seconds-line." REFERENCE "ITU G.997.1 Section 7.2.1.2.7 " ::= { sheAdslAturPerfDataEntry 21 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.18.1.22 sheAdslAturPerfDataCurr1DayUasL OBJECT-TYPE SYNTAX AdslPerfCurrDayCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "For the current day as measured by adslAturPerfCurr1DayTimeElapsed [RFC2662], adslAturPerfCurr1DayUasL reports the number of seconds during which there have been unavailable seconds-line." REFERENCE "ITU G.997.1 Section 7.2.1.2.9 " ::= { sheAdslAturPerfDataEntry 22 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.18.1.23 sheAdslAturPerfDataPrev1DayMoniSecs OBJECT-TYPE SYNTAX INTEGER (0..86400) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monitoring data could not be collected for any reason." ::= { sheAdslAturPerfDataEntry 23 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.18.1.24 sheAdslAturPerfDataPrev1DayLofs OBJECT-TYPE SYNTAX AdslPerfPrevDayCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when there was Loss of Framing within the most recent previous 1-day period." ::= { sheAdslAturPerfDataEntry 24 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.18.1.25 sheAdslAturPerfDataPrev1DayLoss OBJECT-TYPE SYNTAX AdslPerfPrevDayCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when there was Loss of Signal within the most recent previous 1-day period." ::= { sheAdslAturPerfDataEntry 25 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.18.1.26 sheAdslAturPerfDataPrev1DayLprs OBJECT-TYPE SYNTAX AdslPerfPrevDayCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when there was Loss of Power within the most recent previous 1-day period." ::= { sheAdslAturPerfDataEntry 26 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.18.1.27 sheAdslAturPerfDataPrev1DayESs OBJECT-TYPE SYNTAX AdslPerfPrevDayCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Errored Seconds within the most recent previous 1-day period. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects." ::= { sheAdslAturPerfDataEntry 27 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.18.1.28 sheAdslAturPerfDataPrev1DaySesL OBJECT-TYPE SYNTAX AdslPerfPrevDayCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "For the previous day, adslAturPerfPrev1DaySesL reports the number of seconds during which there were severely errored seconds-line." REFERENCE "ITU G.997.1 Section 7.2.1.2.7 " ::= { sheAdslAturPerfDataEntry 28 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.18.1.29 sheAdslAturPerfDataPrev1DayUasL OBJECT-TYPE SYNTAX AdslPerfPrevDayCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "For the previous day, adslAturPerfPrev1DayUasL reports the number of seconds during which there were severely errored seconds-line." REFERENCE "ITU G.997.1 Section 7.2.1.2.9 " ::= { sheAdslAturPerfDataEntry 29 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.19 sheAdslAturIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF SheAdslAturIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides one row for each ATUR performance data collection interval. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94)." ::= { sheAdslLineMIB 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.19.1 sheAdslAturIntervalEntry OBJECT-TYPE SYNTAX SheAdslAturIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the adslAturIntervalTable." INDEX { ifIndex, sheAdslAturChanIntervalNumber } ::= { sheAdslAturIntervalTable 1 } SheAdslAturIntervalEntry ::= SEQUENCE { sheAdslAturIntervalNumber INTEGER, sheAdslAturIntervalValidData TruthValue, sheAdslAturIntervalEndTime Unsigned32, sheAdslAturIntervalLofs PerfIntervalCount, sheAdslAturIntervalLoss PerfIntervalCount, sheAdslAturIntervalLprs PerfIntervalCount, sheAdslAturIntervalESs PerfIntervalCount, sheAdslAturIntervalSesL PerfIntervalCount, sheAdslAturIntervalUasL PerfIntervalCount } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.19.1.1 sheAdslAturIntervalNumber OBJECT-TYPE SYNTAX INTEGER (1..96) MAX-ACCESS read-only STATUS current DESCRIPTION "Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional." ::= { sheAdslAturIntervalEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.19.1.2 sheAdslAturIntervalValidData OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates if the data for this interval is valid." ::= { sheAdslAturIntervalEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.19.1.3 sheAdslAturIntervalEndTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the time of storing this interval." ::= { sheAdslAturIntervalEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.19.1.4 sheAdslAturIntervalLofs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when there was Loss of Framing." ::= { sheAdslAturIntervalEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.19.1.5 sheAdslAturIntervalLoss OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when there was Loss of Signal." ::= { sheAdslAturIntervalEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.19.1.6 sheAdslAturIntervalLprs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when there was Loss of Power." ::= { sheAdslAturIntervalEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.19.1.7 sheAdslAturIntervalESs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Errored Seconds in the interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects." ::= { sheAdslAturIntervalEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.19.1.8 sheAdslAturIntervalSesL OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "For the each interval, adslAturIntervalSesL reports the number of seconds during which there have been severely errored seconds-line." ::= { sheAdslAturIntervalEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.19.1.9 sheAdslAturIntervalUasL OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "For the each interval, adslAturIntervalUasL reports the number of seconds during which there have been unavailable seconds-line." ::= { sheAdslAturIntervalEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.20 sheAdslAturChanPerfDataTable OBJECT-TYPE SYNTAX SEQUENCE OF SheAdslAturChanPerfDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides one row for each ATUR channel." ::= { sheAdslLineMIB 20 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.20.1 sheAdslAturChanPerfDataEntry OBJECT-TYPE SYNTAX SheAdslAturChanPerfDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in adslAturChanPerfDataTable. This table is only supported by NE releases smaller then R2.5 (NO dualLatency support)!!" INDEX { ifIndex } ::= { sheAdslAturChanPerfDataTable 1 } SheAdslAturChanPerfDataEntry ::= SEQUENCE { sheAdslAturChanPerfDataReceivedBlks Counter32, sheAdslAturChanPerfDataTransmittedBlks Counter32, sheAdslAturChanPerfDataCorrectedBlks Counter32, sheAdslAturChanPerfDataUncorrectBlks Counter32, sheAdslAturChanPerfDataExtnNcd Gauge32, sheAdslAturChanPerfDataExtnHec Gauge32, sheAdslAturChanPerfDataPerfValidIntervals INTEGER, sheAdslAturChanPerfDataPerfInvalidIntervals INTEGER, sheAdslAturChanPerfDataCurr15MinTimeElapsed AdslPerfTimeElapsed, sheAdslAturChanPerfDataCurr15MinReceivedBlks PerfCurrentCount, sheAdslAturChanPerfDataCurr15MinTransmittedBlks PerfCurrentCount, sheAdslAturChanPerfDataCurr15MinCorrectedBlks PerfCurrentCount, sheAdslAturChanPerfDataCurr15MinUncorrectBlks PerfCurrentCount, sheAdslAturChanPerfDataExtnCurr15MinNcd Gauge32, sheAdslAturChanPerfDataExtnCurr15MinHec Gauge32, sheAdslAturChanPerfDataCurr1DayTimeElapsed AdslPerfTimeElapsed, sheAdslAturChanPerfDataCurr1DayReceivedBlks AdslPerfCurrDayCount, sheAdslAturChanPerfDataCurr1DayTransmittedBlks AdslPerfCurrDayCount, sheAdslAturChanPerfDataCurr1DayCorrectedBlks AdslPerfCurrDayCount, sheAdslAturChanPerfDataCurr1DayUncorrectBlks AdslPerfCurrDayCount, sheAdslAturChanPerfDataExtnCurr1DayNcd Gauge32, sheAdslAturChanPerfDataExtnCurr1DayHec Gauge32, sheAdslAturChanPerfDataPrev1DayMoniSecs INTEGER, sheAdslAturChanPerfDataPrev1DayReceivedBlks AdslPerfPrevDayCount, sheAdslAturChanPerfDataPrev1DayTransmittedBlks AdslPerfPrevDayCount, sheAdslAturChanPerfDataPrev1DayCorrectedBlks AdslPerfPrevDayCount, sheAdslAturChanPerfDataPrev1DayUncorrectBlks AdslPerfPrevDayCount, sheAdslAturChanPerfDataExtnPrev1DayNcd Gauge32, sheAdslAturChanPerfDataExtnPrev1DayHec Gauge32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.20.1.1 sheAdslAturChanPerfDataReceivedBlks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks received on this channel since agent reset." ::= { sheAdslAturChanPerfDataEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.20.1.2 sheAdslAturChanPerfDataTransmittedBlks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks transmitted on this channel since agent reset." ::= { sheAdslAturChanPerfDataEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.20.1.3 sheAdslAturChanPerfDataCorrectedBlks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with errors that were corrected since agent reset. These blocks are passed on as good data." ::= { sheAdslAturChanPerfDataEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.20.1.4 sheAdslAturChanPerfDataUncorrectBlks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with uncorrectable errors since agent reset." ::= { sheAdslAturChanPerfDataEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.20.1.5 sheAdslAturChanPerfDataExtnNcd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets with no cell delineation(NCD) error on this channel." ::= { sheAdslAturChanPerfDataEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.20.1.6 sheAdslAturChanPerfDataExtnHec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets with Header error check (HEC) error on this channel." ::= { sheAdslAturChanPerfDataEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.20.1.7 sheAdslAturChanPerfDataPerfValidIntervals OBJECT-TYPE SYNTAX INTEGER (0..96) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of previous 15-minute intervals in the interval table for which data was collected. Given that is the maximum # of intervals supported. The value will be unless the measurement was (re-)started within the last (*15) minutes, in which case the value will be the number of complete 15 minute intervals for which the agent has at least some data. In certain cases (e.g., in the case where the agent is a proxy) it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available." ::= { sheAdslAturChanPerfDataEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.20.1.8 sheAdslAturChanPerfDataPerfInvalidIntervals OBJECT-TYPE SYNTAX INTEGER (0..96) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of intervals in the range from 0 to the value of adslAturChanPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations)." ::= { sheAdslAturChanPerfDataEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.20.1.9 sheAdslAturChanPerfDataCurr15MinTimeElapsed OBJECT-TYPE SYNTAX AdslPerfTimeElapsed (0..899) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Total elapsed seconds in this interval. A full interval is 900 seconds." ::= { sheAdslAturChanPerfDataEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.20.1.10 sheAdslAturChanPerfDataCurr15MinReceivedBlks OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks received on this channel within the current 15 minute interval." ::= { sheAdslAturChanPerfDataEntry 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.20.1.11 sheAdslAturChanPerfDataCurr15MinTransmittedBlks OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks transmitted on this channel within the current 15 minute interval." ::= { sheAdslAturChanPerfDataEntry 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.20.1.12 sheAdslAturChanPerfDataCurr15MinCorrectedBlks OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with errors that were corrected on this channel within the current 15 minute interval." ::= { sheAdslAturChanPerfDataEntry 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.20.1.13 sheAdslAturChanPerfDataCurr15MinUncorrectBlks OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with uncorrectable errors on this channel within the current 15 minute interval." ::= { sheAdslAturChanPerfDataEntry 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.20.1.14 sheAdslAturChanPerfDataExtnCurr15MinNcd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets with no cell delineation(NCD) error on this channel within the current 15 minute time interval." ::= { sheAdslAturChanPerfDataEntry 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.20.1.15 sheAdslAturChanPerfDataExtnCurr15MinHec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets with Header error check (HEC) error on this channel within the current 15 minute time interval." ::= { sheAdslAturChanPerfDataEntry 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.20.1.16 sheAdslAturChanPerfDataCurr1DayTimeElapsed OBJECT-TYPE SYNTAX AdslPerfTimeElapsed (0..86399) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds that have elapsed since the beginning of the current 1-day interval." ::= { sheAdslAturChanPerfDataEntry 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.20.1.17 sheAdslAturChanPerfDataCurr1DayReceivedBlks OBJECT-TYPE SYNTAX AdslPerfCurrDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks received on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed." ::= { sheAdslAturChanPerfDataEntry 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.20.1.18 sheAdslAturChanPerfDataCurr1DayTransmittedBlks OBJECT-TYPE SYNTAX AdslPerfCurrDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks transmitted on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed." ::= { sheAdslAturChanPerfDataEntry 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.20.1.19 sheAdslAturChanPerfDataCurr1DayCorrectedBlks OBJECT-TYPE SYNTAX AdslPerfCurrDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with errors that were corrected on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed." ::= { sheAdslAturChanPerfDataEntry 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.20.1.20 sheAdslAturChanPerfDataCurr1DayUncorrectBlks OBJECT-TYPE SYNTAX AdslPerfCurrDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with uncorrectable errors on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed." ::= { sheAdslAturChanPerfDataEntry 20 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.20.1.21 sheAdslAturChanPerfDataExtnCurr1DayNcd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets with no cell delineation (NCD) error on this channel within the current 1 day time interval." ::= { sheAdslAturChanPerfDataEntry 21 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.20.1.22 sheAdslAturChanPerfDataExtnCurr1DayHec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets with Header error check (HEC) error on this channel within the current 1 day time interval." ::= { sheAdslAturChanPerfDataEntry 22 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.20.1.23 sheAdslAturChanPerfDataPrev1DayMoniSecs OBJECT-TYPE SYNTAX INTEGER (0..86400) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monitoring data could not be collected for any reason." ::= { sheAdslAturChanPerfDataEntry 23 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.20.1.24 sheAdslAturChanPerfDataPrev1DayReceivedBlks OBJECT-TYPE SYNTAX AdslPerfPrevDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks received on this channel within the most recent previous 1-day period." ::= { sheAdslAturChanPerfDataEntry 24 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.20.1.25 sheAdslAturChanPerfDataPrev1DayTransmittedBlks OBJECT-TYPE SYNTAX AdslPerfPrevDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks transmitted on this channel within the most recent previous 1-day period." ::= { sheAdslAturChanPerfDataEntry 25 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.20.1.26 sheAdslAturChanPerfDataPrev1DayCorrectedBlks OBJECT-TYPE SYNTAX AdslPerfPrevDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with errors that were corrected on this channel within the most recent previous 1-day period." ::= { sheAdslAturChanPerfDataEntry 26 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.20.1.27 sheAdslAturChanPerfDataPrev1DayUncorrectBlks OBJECT-TYPE SYNTAX AdslPerfPrevDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with uncorrectable errors on this channel within the most recent previous 1-day period." ::= { sheAdslAturChanPerfDataEntry 27 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.20.1.28 sheAdslAturChanPerfDataExtnPrev1DayNcd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets with no cell delineation (NCD) error on this channel within the most recent previous period." ::= { sheAdslAturChanPerfDataEntry 28 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.20.1.29 sheAdslAturChanPerfDataExtnPrev1DayHec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets with Header error check (HEC) error on this channel within the most recent previous period." ::= { sheAdslAturChanPerfDataEntry 29 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.21 sheAdslAturChanIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF SheAdslAturChanIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides one row for each ATUR channel's performance data collection interval. " ::= { sheAdslLineMIB 21 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.21.1 sheAdslAturChanIntervalEntry OBJECT-TYPE SYNTAX SheAdslAturChanIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the adslAturIntervalTable. This table is only supported by NE releases smaller then R2.5 (NO dualLatency support)!!" INDEX { ifIndex, sheAdslAturChanIntervalNumber } ::= { sheAdslAturChanIntervalTable 1 } SheAdslAturChanIntervalEntry ::= SEQUENCE { sheAdslAturChanIntervalNumber INTEGER, sheAdslAturChanIntervalValidData TruthValue, sheAdslAturChanIntervalEndTime Unsigned32, sheAdslAturChanIntervalReceivedBlks PerfIntervalCount, sheAdslAturChanIntervalTransmittedBlks PerfIntervalCount, sheAdslAturChanIntervalCorrectedBlks PerfIntervalCount, sheAdslAturChanIntervalUncorrectBlks PerfIntervalCount, sheAdslAturChanIntervalNcd Gauge32, sheAdslAturChanIntervalHec Gauge32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.21.1.1 sheAdslAturChanIntervalNumber OBJECT-TYPE SYNTAX INTEGER (1..96) MAX-ACCESS read-only STATUS current DESCRIPTION "Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional." ::= { sheAdslAturChanIntervalEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.21.1.2 sheAdslAturChanIntervalValidData OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates if the data for this interval is valid." ::= { sheAdslAturChanIntervalEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.21.1.3 sheAdslAturChanIntervalEndTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the time of storing this interval." ::= { sheAdslAturChanIntervalEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.21.1.4 sheAdslAturChanIntervalReceivedBlks OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks received on this channel during this interval." ::= { sheAdslAturChanIntervalEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.21.1.5 sheAdslAturChanIntervalTransmittedBlks OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks transmitted on this channel during this interval." ::= { sheAdslAturChanIntervalEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.21.1.6 sheAdslAturChanIntervalCorrectedBlks OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with errors that were corrected on this channel during this interval." ::= { sheAdslAturChanIntervalEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.21.1.7 sheAdslAturChanIntervalUncorrectBlks OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with uncorrectable errors on this channel during this interval." ::= { sheAdslAturChanIntervalEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.21.1.8 sheAdslAturChanIntervalNcd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates count of no cell delineation on this channel for this interval." ::= { sheAdslAturChanIntervalEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.21.1.9 sheAdslAturChanIntervalHec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates Header error check counter on this channel during this interval." ::= { sheAdslAturChanIntervalEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.22 sheAdslLineAlarmConfProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF SheAdslLineAlarmConfProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information on the ADSL line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure the modem for a physical line" ::= { sheAdslLineMIB 22 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.22.1 sheAdslLineAlarmConfProfileEntry OBJECT-TYPE SYNTAX SheAdslLineAlarmConfProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry consists of a list of parameters that represents the configuration of an ADSL modem. 'Dynamic' profiles are implemented. A default profile will always exist. This profile's name will be set to `DEFVAL' and its parameters will be set to vendor specific values, unless otherwise specified in this document. " INDEX { sheAdslLineAlarmConfProfileIndex } ::= { sheAdslLineAlarmConfProfileTable 1 } SheAdslLineAlarmConfProfileEntry ::= SEQUENCE { sheAdslLineAlarmConfProfileIndex Integer32, sheAdslLineAlarmConfProfileName SnmpAdminString, sheAdslLineAlarmConfProfileOpStateTrapEnable TruthValue, sheAdslLineAlarmConfProfileAtucThreshFastRateUp Unsigned32, sheAdslLineAlarmConfProfileAtucThreshInterleaveRateUp Unsigned32, sheAdslLineAlarmConfProfileAtucThreshFastRateDown Unsigned32, sheAdslLineAlarmConfProfileAtucThreshInterleaveRateDown Unsigned32, sheAdslLineAlarmConfProfileAtucInitFailureTrapEnable TruthValue, sheAdslLineAlarmConfProfileAtucThresh15MinLofs INTEGER, sheAdslLineAlarmConfProfileAtucThresh15MinLoss INTEGER, sheAdslLineAlarmConfProfileAtucThresh15MinLols INTEGER, sheAdslLineAlarmConfProfileAtucThresh15MinLprs INTEGER, sheAdslLineAlarmConfProfileAtucThresh15MinESs INTEGER, sheAdslLineAlarmConfProfileAtucThresh15MinSesL INTEGER, sheAdslLineAlarmConfProfileAtucThresh15MinUasL INTEGER, sheAdslLineAlarmConfProfileAtucThresh15MinFailFastR INTEGER, sheAdslLineAlarmConfProfileAturThreshFastRateUp Unsigned32, sheAdslLineAlarmConfProfileAturThreshInterleaveRateUp Unsigned32, sheAdslLineAlarmConfProfileAturThreshFastRateDown Unsigned32, sheAdslLineAlarmConfProfileAturThreshInterleaveRateDown Unsigned32, sheAdslLineAlarmConfProfileAturThresh15MinLofs INTEGER, sheAdslLineAlarmConfProfileAturThresh15MinLoss INTEGER, sheAdslLineAlarmConfProfileAturThresh15MinLprs INTEGER, sheAdslLineAlarmConfProfileAturThresh15MinESs INTEGER, sheAdslLineAlarmConfProfileAturThresh15MinSesL INTEGER, sheAdslLineAlarmConfProfileAturThresh15MinUasL INTEGER } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.22.1.1 sheAdslLineAlarmConfProfileIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Tableindex." ::= { sheAdslLineAlarmConfProfileEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.22.1.2 sheAdslLineAlarmConfProfileName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used by the line alarm configuration table in order to identify a row of this table. Dynamic profiles are implemented. The profile name is user specified. The system will always provide a default profile whose name is `DEFVAL'. This characters are not allowed: space : ? leading numbers " ::= { sheAdslLineAlarmConfProfileEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.22.1.3 sheAdslLineAlarmConfProfileOpStateTrapEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Enables and disables the OpStateChangeTrap." DEFVAL { false } ::= { sheAdslLineAlarmConfProfileEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.22.1.4 sheAdslLineAlarmConfProfileAtucThreshFastRateUp OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "Applies to `Fast' channels only. Configured change in rate causing an adslAtucRateChangeTrap. A trap is produced when: ChanCurrTxRate >= ChanPrevTxRate plus the value of this object. A value of `0' will disable the trap." DEFVAL { 0 } ::= { sheAdslLineAlarmConfProfileEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.22.1.5 sheAdslLineAlarmConfProfileAtucThreshInterleaveRateUp OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "Applies to `Interleave' channels only. Configured change in rate causing an adslAtucRateChangeTrap. A trap is produced when: ChanCurrTxRate >= ChanPrevTxRate plus the value of this object. A value of `0' will disable the trap." DEFVAL { 0 } ::= { sheAdslLineAlarmConfProfileEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.22.1.6 sheAdslLineAlarmConfProfileAtucThreshFastRateDown OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "Applies to `Fast' channels only. Configured change in rate causing an adslAtucRateChangeTrap. A trap is produced when: ChanCurrTxRate <= ChanPrevTxRate minus the value of this object. A value of `0' will disable the trap." DEFVAL { 0 } ::= { sheAdslLineAlarmConfProfileEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.22.1.7 sheAdslLineAlarmConfProfileAtucThreshInterleaveRateDown OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "Applies to `Interleave' channels only. Configured change in rate causing an adslAtucRateChangeTrap. A trap is produced when:ChanCurrTxRate <= ChanPrevTxRate minus the value of this object. A value of `0' will disable the trap." DEFVAL { 0 } ::= { sheAdslLineAlarmConfProfileEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.22.1.8 sheAdslLineAlarmConfProfileAtucInitFailureTrapEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Enables and disables the InitFailureTrap. This object is defaulted disable(2)." DEFVAL { false } ::= { sheAdslLineAlarmConfProfileEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.22.1.9 sheAdslLineAlarmConfProfileAtucThresh15MinLofs OBJECT-TYPE SYNTAX INTEGER (0..900) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Loss of Frame Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfLofsThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap." DEFVAL { 0 } ::= { sheAdslLineAlarmConfProfileEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.22.1.10 sheAdslLineAlarmConfProfileAtucThresh15MinLoss OBJECT-TYPE SYNTAX INTEGER (0..900) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Loss of Signal Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfLossThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap." DEFVAL { 0 } ::= { sheAdslLineAlarmConfProfileEntry 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.22.1.11 sheAdslLineAlarmConfProfileAtucThresh15MinLols OBJECT-TYPE SYNTAX INTEGER (0..900) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Loss of Link Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfLolsThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap." DEFVAL { 0 } ::= { sheAdslLineAlarmConfProfileEntry 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.22.1.12 sheAdslLineAlarmConfProfileAtucThresh15MinLprs OBJECT-TYPE SYNTAX INTEGER (0..900) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Loss of Power Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfLprsThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap." DEFVAL { 0 } ::= { sheAdslLineAlarmConfProfileEntry 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.22.1.13 sheAdslLineAlarmConfProfileAtucThresh15MinESs OBJECT-TYPE SYNTAX INTEGER (0..900) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Errored Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfESsThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap." DEFVAL { 0 } ::= { sheAdslLineAlarmConfProfileEntry 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.22.1.14 sheAdslLineAlarmConfProfileAtucThresh15MinSesL OBJECT-TYPE SYNTAX INTEGER (0..900) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Severe errored seconds encountered by an ADSL interface within any giving 15 minutes performance data collection period, which cause the SNMP agend to send an adslAtucPerfSesLTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap. " DEFVAL { 0 } ::= { sheAdslLineAlarmConfProfileEntry 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.22.1.15 sheAdslLineAlarmConfProfileAtucThresh15MinUasL OBJECT-TYPE SYNTAX INTEGER (0..900) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Unavailable seconds encountered by an ADSL interface within any giving 15 minutes performance data collection period, which cause the SNMP agend to send an adslAtucPerfUasLTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap. " DEFVAL { 0 } ::= { sheAdslLineAlarmConfProfileEntry 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.22.1.16 sheAdslLineAlarmConfProfileAtucThresh15MinFailFastR OBJECT-TYPE SYNTAX INTEGER (0..900) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of failed retrains encountered by an ADSL interface within any giving 15 minutes performance data collection period, which cause the SNMP agent to send an adslAtucFailedFastRTrap. Not supported yet! " DEFVAL { 0 } ::= { sheAdslLineAlarmConfProfileEntry 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.22.1.17 sheAdslLineAlarmConfProfileAturThreshFastRateUp OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "Applies to `Fast' channels only. Configured change in rate causing an adslAturRateChangeTrap. A trap is produced when: ChanCurrTxRate >= ChanPrevTxRate plus the value of this object. A value of `0' will disable the trap." DEFVAL { 0 } ::= { sheAdslLineAlarmConfProfileEntry 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.22.1.18 sheAdslLineAlarmConfProfileAturThreshInterleaveRateUp OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "Applies to `Interleave' channels only. Configured change in rate causing an adslAturRateChangeTrap. A trap is produced when: ChanCurrTxRate >= ChanPrevTxRate plus the value of this object. A value of `0' will disable the trap." DEFVAL { 0 } ::= { sheAdslLineAlarmConfProfileEntry 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.22.1.19 sheAdslLineAlarmConfProfileAturThreshFastRateDown OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "Applies to `Fast' channels only. Configured change in rate causing an adslAturRateChangeTrap. A trap is produced when: ChanCurrTxRate <= ChanPrevTxRate minus the value of this object. A value of `0' will disable the trap." DEFVAL { 0 } ::= { sheAdslLineAlarmConfProfileEntry 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.22.1.20 sheAdslLineAlarmConfProfileAturThreshInterleaveRateDown OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "Applies to `Interleave' channels only. Configured change in rate causing an adslAturRateChangeTrap. A trap is produced when: ChanCurrTxRate <= ChanPrevTxRate minus the value of this object. A value of `0' will disable the trap." DEFVAL { 0 } ::= { sheAdslLineAlarmConfProfileEntry 20 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.22.1.21 sheAdslLineAlarmConfProfileAturThresh15MinLofs OBJECT-TYPE SYNTAX INTEGER (0..900) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Loss of Frame Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAturPerfLofsThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap." DEFVAL { 0 } ::= { sheAdslLineAlarmConfProfileEntry 21 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.22.1.22 sheAdslLineAlarmConfProfileAturThresh15MinLoss OBJECT-TYPE SYNTAX INTEGER (0..900) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Loss of Signal Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAturPerfLossThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap." DEFVAL { 0 } ::= { sheAdslLineAlarmConfProfileEntry 22 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.22.1.23 sheAdslLineAlarmConfProfileAturThresh15MinLprs OBJECT-TYPE SYNTAX INTEGER (0..900) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Loss of Power Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAturPerfLprsThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap." DEFVAL { 0 } ::= { sheAdslLineAlarmConfProfileEntry 23 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.22.1.24 sheAdslLineAlarmConfProfileAturThresh15MinESs OBJECT-TYPE SYNTAX INTEGER (0..900) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Errored Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAturPerfESsThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap." DEFVAL { 0 } ::= { sheAdslLineAlarmConfProfileEntry 24 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.22.1.25 sheAdslLineAlarmConfProfileAturThresh15MinSesL OBJECT-TYPE SYNTAX INTEGER (0..900) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Severe errored seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAturPerfSesLThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap. " DEFVAL { 0 } ::= { sheAdslLineAlarmConfProfileEntry 25 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.22.1.26 sheAdslLineAlarmConfProfileAturThresh15MinUasL OBJECT-TYPE SYNTAX INTEGER (0..900) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Unavailable seconds encountered by an ADSL interface within any giving 15 minutes performance data collection period, which cause the SNMP agend to send an adslAturPerfUasLTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap. " DEFVAL { 0 } ::= { sheAdslLineAlarmConfProfileEntry 26 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.23 sheAdslLineAlarmConfProfileControl OBJECT IDENTIFIER ::= { sheAdslLineMIB 23 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.23.1 sheAdslLineAlarmConfProfileControlRequest OBJECT-TYPE SYNTAX SheAdslControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "createAdslLineAlarmConfProfile: sheAdslLineAlarmConfProfileControlName ... modifyAdslLineAlarmConfProfile: sheAdslLineAlarmConfProfileControlIndex sheAdslLineAlarmConfProfileControlName ... deleteAdslLineAlarmConfProfile: sheAdslLineAlarmConfProfileControlIndex sheAdslLineAlarmConfProfileControlName " ::= { sheAdslLineAlarmConfProfileControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.23.2 sheAdslLineAlarmConfProfileControlIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Index of the table entry to be configured. Needed for modify or delete." ::= { sheAdslLineAlarmConfProfileControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.23.3 sheAdslLineAlarmConfProfileControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. " ::= { sheAdslLineAlarmConfProfileControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.23.4 sheAdslLineAlarmConfProfileControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. " ::= { sheAdslLineAlarmConfProfileControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.23.5 sheAdslLineAlarmConfProfileControlReqResult OBJECT-TYPE SYNTAX SheAdslControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheAdslLineAlarmConfProfileControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.23.6 sheAdslLineAlarmConfProfileControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheAdslLineAlarmConfProfileControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.23.7 sheAdslLineAlarmConfProfileControlName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "Descriptional name." ::= { sheAdslLineAlarmConfProfileControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.23.8 sheAdslLineAlarmConfProfileControlOpStateTrapEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables and disables the LineStateTrap." ::= { sheAdslLineAlarmConfProfileControl 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.23.9 sheAdslLineAlarmConfProfileControlAtucThreshFastRateUp OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "bps" MAX-ACCESS read-write STATUS current DESCRIPTION "Applies to `Fast' channels only. Configured change in rate causing an adslAtucRateChangeTrap. A trap is produced when: ChanCurrTxRate >= ChanPrevTxRate plus the value of this object. A value of `0' will disable the trap." ::= { sheAdslLineAlarmConfProfileControl 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.23.10 sheAdslLineAlarmConfProfileControlAtucThreshInterleaveRateUp OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "bps" MAX-ACCESS read-write STATUS current DESCRIPTION "Applies to `Interleave' channels only. Configured change in rate causing an adslAtucRateChangeTrap. A trap is produced when: ChanCurrTxRate >= ChanPrevTxRate plus the value of this object. A value of `0' will disable the trap." ::= { sheAdslLineAlarmConfProfileControl 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.23.11 sheAdslLineAlarmConfProfileControlAtucThreshFastRateDown OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "bps" MAX-ACCESS read-write STATUS current DESCRIPTION "Applies to `Fast' channels only. Configured change in rate causing an adslAtucRateChangeTrap. A trap is produced when: ChanCurrTxRate <= ChanPrevTxRate minus the value of this object. A value of `0' will disable the trap." ::= { sheAdslLineAlarmConfProfileControl 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.23.12 sheAdslLineAlarmConfProfileControlAtucThreshInterleaveRateDown OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "bps" MAX-ACCESS read-write STATUS current DESCRIPTION "Applies to `Interleave' channels only. Configured change in rate causing an adslAtucRateChangeTrap. A trap is produced when: ChanCurrTxRate <= ChanPrevTxRate minus the value of this object. A value of `0' will disable the trap." ::= { sheAdslLineAlarmConfProfileControl 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.23.13 sheAdslLineAlarmConfProfileControlAtucInitFailureTrapEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables and disables the InitFailureTrap. This object is defaulted disable(2)." ::= { sheAdslLineAlarmConfProfileControl 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.23.14 sheAdslLineAlarmConfProfileControlAtucThresh15MinLofs OBJECT-TYPE SYNTAX INTEGER (0..900) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of Loss of Frame Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfLofsThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap." ::= { sheAdslLineAlarmConfProfileControl 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.23.15 sheAdslLineAlarmConfProfileControlAtucThresh15MinLoss OBJECT-TYPE SYNTAX INTEGER (0..900) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of Loss of Signal Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfLossThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap." ::= { sheAdslLineAlarmConfProfileControl 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.23.16 sheAdslLineAlarmConfProfileControlAtucThresh15MinLols OBJECT-TYPE SYNTAX INTEGER (0..900) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of Loss of Link Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfLolsThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap." ::= { sheAdslLineAlarmConfProfileControl 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.23.17 sheAdslLineAlarmConfProfileControlAtucThresh15MinLprs OBJECT-TYPE SYNTAX INTEGER (0..900) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of Loss of Power Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfLprsThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap." ::= { sheAdslLineAlarmConfProfileControl 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.23.18 sheAdslLineAlarmConfProfileControlAtucThresh15MinESs OBJECT-TYPE SYNTAX INTEGER (0..900) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of Errored Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfESsThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap." ::= { sheAdslLineAlarmConfProfileControl 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.23.19 sheAdslLineAlarmConfProfileControlAtucThresh15MinSesL OBJECT-TYPE SYNTAX INTEGER (0..900) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of Errored Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfSesLThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap." ::= { sheAdslLineAlarmConfProfileControl 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.23.20 sheAdslLineAlarmConfProfileControlAtucThresh15MinUasL OBJECT-TYPE SYNTAX INTEGER (0..900) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of Errored Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfUasLThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap." ::= { sheAdslLineAlarmConfProfileControl 20 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.23.21 sheAdslLineAlarmConfProfileControlAtucThresh15MinFailFastR OBJECT-TYPE SYNTAX INTEGER (0..900) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of failed retrains encountered by an ADSL interface within any giving 15 minutes performance data collection period, which cause the SNMP agent to send an adslAtucFailedFastRTrap." ::= { sheAdslLineAlarmConfProfileControl 21 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.23.22 sheAdslLineAlarmConfProfileControlAturThreshFastRateUp OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "bps" MAX-ACCESS read-write STATUS current DESCRIPTION "Applies to `Fast' channels only. Configured change in rate causing an adslAturRateChangeTrap. A trap is produced when: ChanCurrTxRate >= ChanPrevTxRate plus the value of this object. A value of `0' will disable the trap." ::= { sheAdslLineAlarmConfProfileControl 22 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.23.23 sheAdslLineAlarmConfProfileControlAturThreshInterleaveRateUp OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "bps" MAX-ACCESS read-write STATUS current DESCRIPTION "Applies to `Interleave' channels only. configured change in rate causing an adslAturRateChangeTrap. A trap is produced when: ChanCurrTxRate >= ChanPrevTxRate plus the value of this object. A value of `0' will disable the trap." ::= { sheAdslLineAlarmConfProfileControl 23 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.23.24 sheAdslLineAlarmConfProfileControlAturThreshFastRateDown OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "bps" MAX-ACCESS read-write STATUS current DESCRIPTION "Applies to `Fast' channels only. Configured change in rate causing an adslAturRateChangeTrap. A trap is produced when: ChanCurrTxRate <= ChanPrevTxRate minus the value of this object. A value of `0' will disable the trap." ::= { sheAdslLineAlarmConfProfileControl 24 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.23.25 sheAdslLineAlarmConfProfileControlAturThreshInterleaveRateDown OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "bps" MAX-ACCESS read-write STATUS current DESCRIPTION "Applies to `Interleave' channels only. Configured change in rate causing an adslAturRateChangeTrap. A trap is produced when: ChanCurrTxRate <= ChanPrevTxRate minus the value of this object. A value of `0' will disable the trap." ::= { sheAdslLineAlarmConfProfileControl 25 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.23.26 sheAdslLineAlarmConfProfileControlAturThresh15MinLofs OBJECT-TYPE SYNTAX INTEGER (0..900) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of Loss of Frame Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAturPerfLofsThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap." ::= { sheAdslLineAlarmConfProfileControl 26 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.23.27 sheAdslLineAlarmConfProfileControlAturThresh15MinLoss OBJECT-TYPE SYNTAX INTEGER (0..900) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of Loss of Signal Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAturPerfLossThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap." ::= { sheAdslLineAlarmConfProfileControl 27 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.23.28 sheAdslLineAlarmConfProfileControlAturThresh15MinLprs OBJECT-TYPE SYNTAX INTEGER (0..900) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of Loss of Power Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAturPerfLprsThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap." ::= { sheAdslLineAlarmConfProfileControl 28 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.23.29 sheAdslLineAlarmConfProfileControlAturThresh15MinESs OBJECT-TYPE SYNTAX INTEGER (0..900) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of Errored Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAturPerfESsThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap." ::= { sheAdslLineAlarmConfProfileControl 29 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.23.30 sheAdslLineAlarmConfProfileControlAturThresh15MinSesL OBJECT-TYPE SYNTAX INTEGER (0..900) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of Errored Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAturPerfSesLThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap." ::= { sheAdslLineAlarmConfProfileControl 30 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.23.31 sheAdslLineAlarmConfProfileControlAturThresh15MinUasL OBJECT-TYPE SYNTAX INTEGER (0..900) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of Errored Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAturPerfUasLThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap." ::= { sheAdslLineAlarmConfProfileControl 31 } -- trap definitions -- -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24 sheAdslNotifications OBJECT IDENTIFIER ::= { sheAdslLineMIB 24 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.1 sheAdslAtucTraps OBJECT IDENTIFIER ::= { sheAdslNotifications 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.1.1 sheAdslAtucPerfLofsThreshTrap NOTIFICATION-TYPE OBJECTS { sheAdslAtucPerfDataCurr15MinLofs, sheAdslLineAlarmConfProfileAtucThresh15MinLofs } STATUS current DESCRIPTION "Loss of Framing 15-minute interval threshold reached." ::= { sheAdslAtucTraps 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.1.2 sheAdslAtucPerfLossThreshTrap NOTIFICATION-TYPE OBJECTS { sheAdslAtucPerfDataCurr15MinLoss, sheAdslLineAlarmConfProfileAtucThresh15MinLoss } STATUS current DESCRIPTION "Loss of Signal 15-minute interval threshold reached." ::= { sheAdslAtucTraps 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.1.3 sheAdslAtucPerfLolsThreshTrap NOTIFICATION-TYPE OBJECTS { sheAdslAtucPerfDataCurr15MinLols, sheAdslLineAlarmConfProfileAtucThresh15MinLols } STATUS current DESCRIPTION "Loss of Link 15-minute interval threshold reached." ::= { sheAdslAtucTraps 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.1.4 sheAdslAtucPerfLprsThreshTrap NOTIFICATION-TYPE OBJECTS { sheAdslAtucPerfDataCurr15MinLprs, sheAdslLineAlarmConfProfileAtucThresh15MinLprs } STATUS current DESCRIPTION "Loss of Power 15-minute interval threshold reached." ::= { sheAdslAtucTraps 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.1.5 sheAdslAtucPerfESsThreshTrap NOTIFICATION-TYPE OBJECTS { sheAdslAtucPerfDataCurr15MinESs, sheAdslLineAlarmConfProfileAtucThresh15MinESs } STATUS current DESCRIPTION "Errored Second 15-minute interval threshold reached." ::= { sheAdslAtucTraps 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.1.6 sheAdslAtucRateChangeTrap NOTIFICATION-TYPE OBJECTS { sheAdslAtucChanCurrTxRate, sheAdslAtucChanPrevTxRate } STATUS current DESCRIPTION "The ATUCs transmit rate has changed (RADSL mode only)" ::= { sheAdslAtucTraps 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.1.7 sheAdslAtucStatusTrap NOTIFICATION-TYPE OBJECTS { sheAdslAtucPhysCurrStatus, sheAdslAtucChanCurrAtmStatus } STATUS current DESCRIPTION "ATUC initialization failed. See sheAdslAtucPhysCurrStatus for potential reasons." ::= { sheAdslAtucTraps 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.1.8 sheAdslAtucFailedFastRThreshTrap NOTIFICATION-TYPE OBJECTS { sheAdslAtucPerfDataCurr15MinFailedFastR, sheAdslLineAlarmConfProfileAtucThresh15MinFailFastR } STATUS current DESCRIPTION "Failed Fast Retrains 15-minute threshold reached." ::= { sheAdslAtucTraps 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.1.9 sheAdslAtucPerfSesLThreshTrap NOTIFICATION-TYPE OBJECTS { sheAdslAtucPerfDataCurr15MinSesL, sheAdslLineAlarmConfProfileAtucThresh15MinSesL } STATUS current DESCRIPTION "Severely errored seconds-line 15-minute threshold reached." ::= { sheAdslAtucTraps 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.1.10 sheAdslAtucPerfUasLThreshTrap NOTIFICATION-TYPE OBJECTS { sheAdslAtucPerfDataCurr15MinUasL, sheAdslLineAlarmConfProfileAturThresh15MinUasL } STATUS current DESCRIPTION "Unavailable seconds-line 15-minute threshold reached." ::= { sheAdslAtucTraps 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.1.11 sheAdslLineStateTrap NOTIFICATION-TYPE OBJECTS { sheAdslAtucPhysOpState } STATUS current DESCRIPTION "The operational line state was changed. This trap will be enabled/disabled over the value of sheLineAlarmConfProfileOpStateTrapEnable. " ::= { sheAdslAtucTraps 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.1.12 sheAdslAtucPerfLol NOTIFICATION-TYPE OBJECTS { sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity } STATUS current DESCRIPTION "This alarm informs the link between the line card and modem is disconnected for unidentied reason, not dying gasp. " ::= { sheAdslAtucTraps 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.1.13 -- THIS ELEMENT WILL NOT LONGER BE SUPPORTED BY NE up R2.5. -- Replaced by sheAdslLineAlarmTraps! sheAdslAtucPerfLpr NOTIFICATION-TYPE OBJECTS { sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity } STATUS current DESCRIPTION "This alarm informs the link between the line card and modem is disconnected for dying gasp. " ::= { sheAdslAtucTraps 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.1.14 -- THIS ELEMENT WILL NOT LONGER BE SUPPORTED BY NE up R2.5. -- Replaced by sheAdslLineAlarmTraps! sheAdslAtucPerfLos NOTIFICATION-TYPE OBJECTS { sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity } STATUS current DESCRIPTION "An LOS failure is declared after 2.5 +(-) 0.5 s of contiguous LOS defect, or, if LOS defect is present when the criteria for LOF failure declaration have been met (see LOF definition below). A LOS failure is cleared after 10 +(-) 0.5 s of no LOS defect. " ::= { sheAdslAtucTraps 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.1.15 -- THIS ELEMENT WILL NOT LONGER BE SUPPORTED BY NE up R2.5. -- Replaced by sheAdslLineAlarmTraps! sheAdslAtucPerfLof NOTIFICATION-TYPE OBJECTS { sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity } STATUS current DESCRIPTION "An LOF failure is declared after 2.5 +(-) 0.5 s of contiguous SEF defect, except when an LOS defect or failure is present (see LOS definition above). A LOF failure is cleared when LOS failure is declared, or after 10 +(-) 0.5 s of no SEF defect. " ::= { sheAdslAtucTraps 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.1.16 sheAdslLineActStateTrap NOTIFICATION-TYPE OBJECTS { sheAdslAtucPhysActState } STATUS current DESCRIPTION "The line activation command was sent to Line card system" ::= { sheAdslAtucTraps 16 } sheAdslInitFailTrap NOTIFICATION-TYPE OBJECTS { sheAdslAtucPhysCurrStatus } STATUS current DESCRIPTION "The init fail trap, trap will only send if a initialication was detected. This trap could be enabled/disabled over the value of sheLineAlarmConfProfileInitFailTrapEnable." ::= { sheAdslAtucTraps 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.2 sheAdslAturTraps OBJECT IDENTIFIER ::= { sheAdslNotifications 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.2.1 sheAdslAturRateChangeTrap NOTIFICATION-TYPE OBJECTS { sheAdslAturChanCurrTxRate, sheAdslAturChanPrevTxRate } STATUS current DESCRIPTION "The ATURs transmit rate has changed (RADSL mode only)" ::= { sheAdslAturTraps 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.2.2 sheAdslAturPerfLofsThreshTrap NOTIFICATION-TYPE OBJECTS { sheAdslAturPerfDataCurr15MinLofs, sheAdslLineAlarmConfProfileAturThresh15MinLofs } STATUS current DESCRIPTION "Loss of Framing 15-minute interval threshold reached." ::= { sheAdslAturTraps 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.2.3 sheAdslAturPerfLossThreshTrap NOTIFICATION-TYPE OBJECTS { sheAdslAturPerfDataCurr15MinLoss, sheAdslLineAlarmConfProfileAturThresh15MinLoss } STATUS current DESCRIPTION "Loss of Signal 15-minute interval threshold reached." ::= { sheAdslAturTraps 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.2.4 sheAdslAturPerfLprsThreshTrap NOTIFICATION-TYPE OBJECTS { sheAdslAturPerfDataCurr15MinLprs, sheAdslLineAlarmConfProfileAturThresh15MinLprs } STATUS current DESCRIPTION "Loss of Power 15-minute interval threshold reached." ::= { sheAdslAturTraps 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.2.5 sheAdslAturPerfESsThreshTrap NOTIFICATION-TYPE OBJECTS { sheAdslAturPerfDataCurr15MinESs, sheAdslLineAlarmConfProfileAturThresh15MinESs } STATUS current DESCRIPTION "Errored Second 15-minute interval threshold reached." ::= { sheAdslAturTraps 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.2.6 sheAdslAturPerfSesLThreshTrap NOTIFICATION-TYPE OBJECTS { sheAdslAturPerfDataCurr15MinSesL, sheAdslLineAlarmConfProfileAturThresh15MinSesL } STATUS current DESCRIPTION "Severely errored seconds-line 15-minute threshold reached." ::= { sheAdslAturTraps 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.2.7 sheAdslAturPerfUasLThreshTrap NOTIFICATION-TYPE OBJECTS { sheAdslAturPerfDataCurr15MinUasL, sheAdslLineAlarmConfProfileAturThresh15MinUasL } STATUS current DESCRIPTION "Unavailable seconds-line 15-minute threshold reached." ::= { sheAdslAturTraps 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.2.8 sheAdslAturStatusTrap NOTIFICATION-TYPE OBJECTS { sheAdslAturPhysCurrStatus, sheAdslAturChanCurrAtmStatus } STATUS current DESCRIPTION "ATUC initialization failed. See sheAdslAtucPhysCurrStatus for potential reasons." ::= { sheAdslAturTraps 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.2.9 -- THIS ELEMENT WILL NOT LONGER BE SUPPORTED BY NE up R2.5. -- Replaced by sheAdslLineAlarmTraps! sheAdslAturPerfLos NOTIFICATION-TYPE OBJECTS { sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity } STATUS current DESCRIPTION "An LOS failure is declared after 2.5 +(-) 0.5 s of contiguous LOS defect, or, if LOS defect is present when the criteria for LOF failure declaration have been met (see LOF definition below). A LOS failure is cleared after 10 +(-) 0.5 s of no LOS defect.." ::= { sheAdslAturTraps 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.2.10 -- THIS ELEMENT WILL NOT LONGER BE SUPPORTED BY NE up R2.5. -- Replaced by sheAdslLineAlarmTraps! sheAdslAturPerfLof NOTIFICATION-TYPE OBJECTS { sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity } STATUS current DESCRIPTION "An LOF failure is declared after 2.5 +(-) 0.5 s of contiguous SEF defect, except when an LOS defect or failure is present (see LOS definition above). A LOF failure is cleared when LOS failure is declared, or after 10 +(-) 0.5 s of no SEF defect." ::= { sheAdslAturTraps 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.3 sheAdslConfigurationTraps OBJECT IDENTIFIER ::= { sheAdslNotifications 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.3.2 sheAdslLineConfProfileCreated NOTIFICATION-TYPE OBJECTS { sheAdslLineConfProfileControlIndex, sheAdslLineConfProfileControlTimeStamp, sheAdslLineConfProfileControlName, sheAdslLineConfProfileControlAtucConfRateMode, sheAdslLineConfProfileControlAtucConfRateChanRatio, sheAdslLineConfProfileControlAtucConfTargetSnrMgn, sheAdslLineConfProfileControlAtucConfMaxSnrMgn, sheAdslLineConfProfileControlAtucConfMinSnrMgn, sheAdslLineConfProfileControlAtucConfDownshiftSnrMgn, sheAdslLineConfProfileControlAtucConfUpshiftSnrMgn, sheAdslLineConfProfileControlAtucConfMinUpshiftTime, sheAdslLineConfProfileControlAtucConfMinDownshiftTime, sheAdslLineConfProfileControlAtucChanConfFastMinTxRate, sheAdslLineConfProfileControlAtucChanConfInterleaveMinTxRate, sheAdslLineConfProfileControlAtucChanConfFastMaxTxRate, sheAdslLineConfProfileControlAtucChanConfInterleaveMaxTxRate, sheAdslLineConfProfileControlAtucChanConfMaxInterleaveDelay, sheAdslLineConfProfileControlAturConfRateMode, sheAdslLineConfProfileControlAturConfRateChanRatio, sheAdslLineConfProfileControlAturConfTargetSnrMgn, sheAdslLineConfProfileControlAturConfMaxSnrMgn, sheAdslLineConfProfileControlAturConfMinSnrMgn, sheAdslLineConfProfileControlAturConfDownshiftSnrMgn, sheAdslLineConfProfileControlAturConfUpshiftSnrMgn, sheAdslLineConfProfileControlAturConfMinUpshiftTime, sheAdslLineConfProfileControlAturConfMinDownshiftTime, sheAdslLineConfProfileControlAturChanConfFastMinTxRate, sheAdslLineConfProfileControlAturChanConfInterleaveMinTxRate, sheAdslLineConfProfileControlAturChanConfFastMaxTxRate, sheAdslLineConfProfileControlAturChanConfInterleaveMaxTxRate, sheAdslLineConfProfileControlAturChanConfMaxInterleaveDelay, sheAdslLineConfProfileControlTrellis, sheAdslLineConfProfileControlAtucConfPwrMgmtL0Time, sheAdslLineConfProfileControlAtucConfPwrMgmtL2Time, sheAdslLineConfProfileControlAtucConfPwrMgmtL2ATPR, sheAdslLineConfProfileControlAtucConfPwrMgmtL2Rate, sheAdslLineConfProfileControlAtucConfPwrMgmtMode } STATUS current DESCRIPTION "Configuration notification." ::= { sheAdslConfigurationTraps 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.3.3 sheAdslLineConfProfileModified NOTIFICATION-TYPE OBJECTS { sheAdslLineConfProfileControlIndex, sheAdslLineConfProfileControlTimeStamp, sheAdslLineConfProfileControlName, sheAdslLineConfProfileControlAtucConfRateMode, sheAdslLineConfProfileControlAtucConfRateChanRatio, sheAdslLineConfProfileControlAtucConfTargetSnrMgn, sheAdslLineConfProfileControlAtucConfMaxSnrMgn, sheAdslLineConfProfileControlAtucConfMinSnrMgn, sheAdslLineConfProfileControlAtucConfDownshiftSnrMgn, sheAdslLineConfProfileControlAtucConfUpshiftSnrMgn, sheAdslLineConfProfileControlAtucConfMinUpshiftTime, sheAdslLineConfProfileControlAtucConfMinDownshiftTime, sheAdslLineConfProfileControlAtucChanConfFastMinTxRate, sheAdslLineConfProfileControlAtucChanConfInterleaveMinTxRate, sheAdslLineConfProfileControlAtucChanConfFastMaxTxRate, sheAdslLineConfProfileControlAtucChanConfInterleaveMaxTxRate, sheAdslLineConfProfileControlAtucChanConfMaxInterleaveDelay, sheAdslLineConfProfileControlAturConfRateMode, sheAdslLineConfProfileControlAturConfRateChanRatio, sheAdslLineConfProfileControlAturConfTargetSnrMgn, sheAdslLineConfProfileControlAturConfMaxSnrMgn, sheAdslLineConfProfileControlAturConfMinSnrMgn, sheAdslLineConfProfileControlAturConfDownshiftSnrMgn, sheAdslLineConfProfileControlAturConfUpshiftSnrMgn, sheAdslLineConfProfileControlAturConfMinUpshiftTime, sheAdslLineConfProfileControlAturConfMinDownshiftTime, sheAdslLineConfProfileControlAturChanConfFastMinTxRate, sheAdslLineConfProfileControlAturChanConfInterleaveMinTxRate, sheAdslLineConfProfileControlAturChanConfFastMaxTxRate, sheAdslLineConfProfileControlAturChanConfInterleaveMaxTxRate, sheAdslLineConfProfileControlAturChanConfMaxInterleaveDelay, sheAdslLineConfProfileControlTrellis, sheAdslLineConfProfileControlAtucConfPwrMgmtL0Time, sheAdslLineConfProfileControlAtucConfPwrMgmtL2Time, sheAdslLineConfProfileControlAtucConfPwrMgmtL2ATPR, sheAdslLineConfProfileControlAtucConfPwrMgmtL2Rate, sheAdslLineConfProfileControlAtucConfPwrMgmtMode } STATUS current DESCRIPTION "Configuration notification." ::= { sheAdslConfigurationTraps 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.3.4 sheAdslLineConfProfileDeleted NOTIFICATION-TYPE OBJECTS { sheAdslLineConfProfileControlIndex, sheAdslLineConfProfileControlTimeStamp, sheAdslLineConfProfileControlName } STATUS current DESCRIPTION "Configuration notification." ::= { sheAdslConfigurationTraps 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.3.6 sheAdslLineConfExtnProfileModified NOTIFICATION-TYPE OBJECTS { sheAdslLineConfExtnProfileControlIndex, sheAdslLineConfExtnProfileControlTimeStamp, sheAdslLineConfExtnProfileControlName, sheAdslLineConfExtnProfileControlRsIntCorrectionUp, sheAdslLineConfExtnProfileControlLineType, sheAdslLineConfExtnProfileControlTxEndBin, sheAdslLineConfExtnProfileControlTxStartBin, sheAdslLineConfExtnProfileControlRxStartBin, sheAdslLineConfExtnProfileControlRxEndBin, sheAdslLineConfExtnProfileControlStandard, sheAdslLineConfExtnProfileControlTxPowerAttenuation, sheAdslLineConfExtnProfileControlIntCorrectionDown, sheAdslLineConfExtnProfileControlBitSwap, sheAdslLineConfExtnProfileControlNtr, sheAdslLineConfExtnProfileControlAnnexType, sheAdslLineConfExtnProfileControlUseCustomBin, sheAdslLineConfExtnProfileControlDnBinUsage, sheAdslLineConfExtnProfileControlMaxDCo, sheAdslLineConfExtnProfileControlAdvertisedCapabilities, sheAdslLineConfExtnProfileControlPsdMaskType, sheAdslLineConfExtnProfileControlLineDmtConfMode, sheAdslLineConfExtnProfileControlEraseProfiles, sheAdslLineConfExtnProfileControlParamHybridLossTestStart, sheAdslLineConfExtnProfileControlParamHybridLossTestEnd, sheAdslLineConfExtnProfileControlConfMinInp, sheAdslLineConfExtnProfileControlUpstreamPsdMaskSelection, sheAdslLineConfExtnProfileControlMaxNomPsdDs, sheAdslLineConfExtnProfileControlMaxNomAtpDs, sheAdslLineConfExtnProfileControlPsdMaskDs, sheAdslLineConfExtnProfileControlPSDMASKdsEnable, sheAdslLineConfExtnProfileControlConfMinInpUs } STATUS current DESCRIPTION "Configuration notification." ::= { sheAdslConfigurationTraps 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.3.8 sheAdslLineAlarmConfProfileCreated NOTIFICATION-TYPE OBJECTS { sheAdslLineAlarmConfProfileControlIndex, sheAdslLineAlarmConfProfileControlTimeStamp, sheAdslLineAlarmConfProfileControlName, sheAdslLineAlarmConfProfileControlOpStateTrapEnable, sheAdslLineAlarmConfProfileControlAtucThreshFastRateUp, sheAdslLineAlarmConfProfileControlAtucThreshInterleaveRateUp, sheAdslLineAlarmConfProfileControlAtucThreshFastRateDown, sheAdslLineAlarmConfProfileControlAtucThreshInterleaveRateDown, sheAdslLineAlarmConfProfileControlAtucInitFailureTrapEnable, sheAdslLineAlarmConfProfileControlAtucThresh15MinLofs, sheAdslLineAlarmConfProfileControlAtucThresh15MinLoss, sheAdslLineAlarmConfProfileControlAtucThresh15MinLols, sheAdslLineAlarmConfProfileControlAtucThresh15MinLprs, sheAdslLineAlarmConfProfileControlAtucThresh15MinESs, sheAdslLineAlarmConfProfileControlAtucThresh15MinSesL, sheAdslLineAlarmConfProfileControlAtucThresh15MinUasL, sheAdslLineAlarmConfProfileControlAtucThresh15MinFailFastR, sheAdslLineAlarmConfProfileControlAturThreshFastRateUp, sheAdslLineAlarmConfProfileControlAturThreshInterleaveRateUp, sheAdslLineAlarmConfProfileControlAturThreshFastRateDown, sheAdslLineAlarmConfProfileControlAturThreshInterleaveRateDown, sheAdslLineAlarmConfProfileControlAturThresh15MinLofs, sheAdslLineAlarmConfProfileControlAturThresh15MinLoss, sheAdslLineAlarmConfProfileControlAturThresh15MinLprs, sheAdslLineAlarmConfProfileControlAturThresh15MinESs, sheAdslLineAlarmConfProfileControlAturThresh15MinSesL, sheAdslLineAlarmConfProfileControlAturThresh15MinUasL } STATUS current DESCRIPTION "Configuration notification." ::= { sheAdslConfigurationTraps 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.3.9 sheAdslLineAlarmConfProfileModified NOTIFICATION-TYPE OBJECTS { sheAdslLineAlarmConfProfileControlIndex, sheAdslLineAlarmConfProfileControlTimeStamp, sheAdslLineAlarmConfProfileControlName, sheAdslLineAlarmConfProfileControlOpStateTrapEnable, sheAdslLineAlarmConfProfileControlAtucThreshFastRateUp, sheAdslLineAlarmConfProfileControlAtucThreshInterleaveRateUp, sheAdslLineAlarmConfProfileControlAtucThreshFastRateDown, sheAdslLineAlarmConfProfileControlAtucThreshInterleaveRateDown, sheAdslLineAlarmConfProfileControlAtucInitFailureTrapEnable, sheAdslLineAlarmConfProfileControlAtucThresh15MinLofs, sheAdslLineAlarmConfProfileControlAtucThresh15MinLoss, sheAdslLineAlarmConfProfileControlAtucThresh15MinLols, sheAdslLineAlarmConfProfileControlAtucThresh15MinLprs, sheAdslLineAlarmConfProfileControlAtucThresh15MinESs, sheAdslLineAlarmConfProfileControlAtucThresh15MinSesL, sheAdslLineAlarmConfProfileControlAtucThresh15MinUasL, sheAdslLineAlarmConfProfileControlAtucThresh15MinFailFastR, sheAdslLineAlarmConfProfileControlAturThreshFastRateUp, sheAdslLineAlarmConfProfileControlAturThreshInterleaveRateUp, sheAdslLineAlarmConfProfileControlAturThreshFastRateDown, sheAdslLineAlarmConfProfileControlAturThreshInterleaveRateDown, sheAdslLineAlarmConfProfileControlAturThresh15MinLofs, sheAdslLineAlarmConfProfileControlAturThresh15MinLoss, sheAdslLineAlarmConfProfileControlAturThresh15MinLprs, sheAdslLineAlarmConfProfileControlAturThresh15MinESs, sheAdslLineAlarmConfProfileControlAturThresh15MinSesL, sheAdslLineAlarmConfProfileControlAturThresh15MinUasL } STATUS current DESCRIPTION "Configuration notification." ::= { sheAdslConfigurationTraps 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.3.10 sheAdslLineAlarmConfProfileDeleted NOTIFICATION-TYPE OBJECTS { sheAdslLineAlarmConfProfileControlIndex, sheAdslLineAlarmConfProfileControlTimeStamp, sheAdslLineAlarmConfProfileControlName } STATUS current DESCRIPTION "Configuration notification." ::= { sheAdslConfigurationTraps 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.3.11 sheAdslLineConfigurationModified NOTIFICATION-TYPE OBJECTS { sheAdslLineControlIndex, sheAdslLineControlTimeStamp, sheAdslLineControlConfProfile, sheAdslLineControlAlarmConfProfile, sheAdslLineControlAction, sheAdslLineControlPwrMgmtPMSF, sheAdslLineControlDeltConfLDSF, sheAdslLineControlRfiBandMask } STATUS current DESCRIPTION "Configuration notification." ::= { sheAdslConfigurationTraps 11 } sheAdslLinePerfCounterCleared NOTIFICATION-TYPE OBJECTS { sheAdslLineControlIndex, sheAdslLineControlTimeStamp } STATUS current DESCRIPTION "performance counter cleared" ::= { sheAdslConfigurationTraps 12 } sheAdslLineConfProfileReqResult NOTIFICATION-TYPE OBJECTS { sheAdslLineConfProfileControlIndex, sheAdslLineConfProfileControlTimeStamp, sheAdslLineConfProfileControlName, sheAdslLineConfProfileControlRequest, sheAdslLineConfProfileControlStatus, sheAdslLineConfProfileControlReqResult } STATUS current DESCRIPTION "Configuration notification for long running command - Result-Trap." ::= { sheAdslConfigurationTraps 13 } sheAdslLineConfExtnProfileReqResult NOTIFICATION-TYPE OBJECTS { sheAdslLineConfExtnProfileControlIndex, sheAdslLineConfExtnProfileControlTimeStamp, sheAdslLineConfExtnProfileControlName, sheAdslLineConfExtnProfileControlRequest, sheAdslLineConfExtnProfileControlStatus, sheAdslLineConfExtnProfileControlReqResult } STATUS current DESCRIPTION "Configuration notification for long running command - Result-Trap." ::= { sheAdslConfigurationTraps 14 } sheAdslLineAlarmConfProfileReqResult NOTIFICATION-TYPE OBJECTS { sheAdslLineAlarmConfProfileControlIndex, sheAdslLineAlarmConfProfileControlTimeStamp, sheAdslLineAlarmConfProfileControlName, sheAdslLineAlarmConfProfileControlRequest, sheAdslLineAlarmConfProfileControlStatus, sheAdslLineAlarmConfProfileControlReqResult } STATUS current DESCRIPTION "Configuration notification for long running command - Result-Trap." ::= { sheAdslConfigurationTraps 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.3.2 sheAdslLineDpboProfileCreated NOTIFICATION-TYPE OBJECTS { sheAdslLineDpboProfileControlIndex, sheAdslLineDpboProfileControlTimeStamp, sheAdslLineDpboProfileControlName, sheAdslLineDpboProfileControlEsel, sheAdslLineDpboProfileControlEselMin, sheAdslLineDpboProfileControlMus, sheAdslLineDpboProfileControlMof, sheAdslLineDpboProfileControlFMin, sheAdslLineDpboProfileControlFMax, sheAdslLineDpboProfileControlEpsd, sheAdslLineDpboProfileControlEScmA, sheAdslLineDpboProfileControlEScmB, sheAdslLineDpboProfileControlEScmC } STATUS current DESCRIPTION "Configuration notification." ::= { sheAdslConfigurationTraps 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.3.2 sheAdslLineDpboProfileModified NOTIFICATION-TYPE OBJECTS { sheAdslLineDpboProfileControlIndex, sheAdslLineDpboProfileControlTimeStamp, sheAdslLineDpboProfileControlName, sheAdslLineDpboProfileControlEsel, sheAdslLineDpboProfileControlEselMin, sheAdslLineDpboProfileControlMus, sheAdslLineDpboProfileControlMof, sheAdslLineDpboProfileControlFMin, sheAdslLineDpboProfileControlFMax, sheAdslLineDpboProfileControlEpsd, sheAdslLineDpboProfileControlEScmA, sheAdslLineDpboProfileControlEScmB, sheAdslLineDpboProfileControlEScmC } STATUS current DESCRIPTION "Configuration notification." ::= { sheAdslConfigurationTraps 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.24.3.4 sheAdslLineDpboProfileDeleted NOTIFICATION-TYPE OBJECTS { sheAdslLineDpboProfileControlIndex, sheAdslLineDpboProfileControlTimeStamp, sheAdslLineDpboProfileControlName } STATUS current DESCRIPTION "Configuration notification." ::= { sheAdslConfigurationTraps 18 } sheAdslLineDpboProfileReqResult NOTIFICATION-TYPE OBJECTS { sheAdslLineDpboProfileControlIndex, sheAdslLineDpboProfileControlRequest, sheAdslLineDpboProfileControlStatus, sheAdslLineDpboProfileControlTimeStamp, sheAdslLineDpboProfileControlReqResult } STATUS current DESCRIPTION "Configuration notification for long running command - Result-Trap." ::= { sheAdslConfigurationTraps 19 } sheAdslLineDpboProfileSetReqResult NOTIFICATION-TYPE OBJECTS { sheAdslLineControlIndex, sheAdslLineControlStatus, sheAdslLineControlReqResult, sheAdslLineControlTimeStamp, sheAdslLineControlDpboProfile } STATUS current DESCRIPTION "Configuration notification for long running command - Result-Trap." ::= { sheAdslConfigurationTraps 20 } sheAdslLineDpboProfileSetModified NOTIFICATION-TYPE OBJECTS { sheAdslLineControlIndex, sheAdslLineControlTimeStamp, sheAdslLineControlDpboProfile } STATUS current DESCRIPTION "Configuration notification." ::= { sheAdslConfigurationTraps 21 } sheAdslLineInpValueTruncatedInto2 NOTIFICATION-TYPE OBJECTS { sheAdslLineConfProfileControlIndex, sheAdslLineControlIndex, sheAdslLineControlTimeStamp } STATUS current DESCRIPTION "INP value was truncated into 2 because of the limitation of Conexant." ::= { sheAdslConfigurationTraps 22 } sheAdslLineAlarmTraps OBJECT IDENTIFIER ::= { sheAdslNotifications 4 } sheAdslLineAlarmLOS NOTIFICATION-TYPE OBJECTS { sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity } STATUS current DESCRIPTION "ATUC failure due to not receiving signal" ::= { sheAdslLineAlarmTraps 1 } sheAdslLineAlarmLOF NOTIFICATION-TYPE OBJECTS { sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity } STATUS current DESCRIPTION "ATUC failure due to not receiving valid frame." ::= { sheAdslLineAlarmTraps 2 } sheAdslLineAlarmLOL NOTIFICATION-TYPE OBJECTS { sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity } STATUS current DESCRIPTION "ATUC failure due to inability to link with xTUR" ::= { sheAdslLineAlarmTraps 3 } sheAdslLineAlarmLPR NOTIFICATION-TYPE OBJECTS { sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity } STATUS current DESCRIPTION "ATUR failure due to loss of power" ::= { sheAdslLineAlarmTraps 4 } sheAdslLineAlarmIMNR NOTIFICATION-TYPE OBJECTS { sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity } STATUS current DESCRIPTION "Loss of Signal Quality is declared when the Noise Margin falls below the Minimum Noise Margin, or the bit-error-rate exceeds 10^-7. Detected by Atuc-side." ::= { sheAdslLineAlarmTraps 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.25 sheAdslVccTpTable OBJECT-TYPE SYNTAX SEQUENCE OF SheAdslVccTpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VccTp-Table." ::= { sheAdslLineMIB 25 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.25.1 sheAdslVccTpEntry OBJECT-TYPE SYNTAX SheAdslVccTpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the VccTp-Configurations. There will be one entry for every adsl-interface available per default. This default entry should never be deleted." INDEX { sheAdslVccTpIndex } ::= { sheAdslVccTpTable 1 } SheAdslVccTpEntry ::= SEQUENCE { sheAdslVccTpIndex Integer32, sheAdslVccTpSubLayerIndex InterfaceIndex, sheAdslVccTpNumber Integer32, sheAdslVccTpVpi Integer32, sheAdslVccTpVci Integer32, sheAdslVccTpOamLevel SheAdslOamLevelType, sheAdslVccTpLoopTest SheAdslOamLoopTestType, sheAdslVccTpLoopTestResult SheAdslVccTpLoopTestResultType, sheAdslVccTpLoopLocId OCTET STRING, sheAdslVccTpAlarmSeverityIndex SheAlarmSevProfileIndex, sheAdslVccTpEgressQosClass SheAdslAtmQosType, sheAdslVccTpEgressPeakCellRate Unsigned32, sheAdslVccTpEgressSustainedCellRate Unsigned32, sheAdslVccTpEgressMaxBurstSize Unsigned32, sheAdslVccTpEgressWeight Integer32, sheAdslVccTpIngressSustainedCellRate Unsigned32, sheAdslVccTpIngressMaxBurstSize Unsigned32, sheAdslVccTpAdminState SheAdslEnableType, sheAdslVccTpOrl Unsigned32, sheAdslVccTpUsedDslChannel SheAdslConfLineType, sheAdslVccTpEncapsulation SheAdslAtmEncapType } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.25.1.1 sheAdslVccTpIndex OBJECT-TYPE SYNTAX Integer32 (1..65565) MAX-ACCESS read-only STATUS current DESCRIPTION "Index for that table. The index will follow this rule: VccTpIndex = (VccTpSubLayerIndex << 4) + VccTpNumber" ::= { sheAdslVccTpEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.25.1.2 sheAdslVccTpSubLayerIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "ifIndex of the underlaying adsl-interface." ::= { sheAdslVccTpEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.25.1.3 sheAdslVccTpNumber OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "This is the logical number of VccTP on the corresponding interface. Maximum value is 8." ::= { sheAdslVccTpEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.25.1.4 sheAdslVccTpVpi OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The VPI - Value." DEFVAL { 0 } ::= { sheAdslVccTpEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.25.1.5 sheAdslVccTpVci OBJECT-TYPE SYNTAX Integer32 (32..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The Vci - Value." DEFVAL { 32 } ::= { sheAdslVccTpEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.25.1.6 sheAdslVccTpOamLevel OBJECT-TYPE SYNTAX SheAdslOamLevelType (4..5) MAX-ACCESS read-only STATUS current DESCRIPTION "The OAM level for loop test on VP/VC level. Valid: f5 (for VC). " DEFVAL { 5 } ::= { sheAdslVccTpEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.25.1.7 sheAdslVccTpLoopTest OBJECT-TYPE SYNTAX SheAdslOamLoopTestType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of loop test . For EndToEnd loop test loop location ID is FF..FF." DEFVAL { 0 } ::= { sheAdslVccTpEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.25.1.8 sheAdslVccTpLoopTestResult OBJECT-TYPE SYNTAX SheAdslVccTpLoopTestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "Possible values: segSuccess(0), segFailure(1), endToEndSuccess(2), endToEndFailure(3), aborted(4), progress(5), notAvailable(65535) " ::= { sheAdslVccTpEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.25.1.9 sheAdslVccTpLoopLocId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "Test cell loopback location. It is an identifier known by the crafts person identifying a ATM node in the ATM network. For EndToEnd loop test the default value is valid. " DEFVAL { 'FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF'h } ::= { sheAdslVccTpEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.25.1.10 sheAdslVccTpAlarmSeverityIndex OBJECT-TYPE SYNTAX SheAlarmSevProfileIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Index to the AlarmSeverityProfileTable. Defines the actual AlarmSeverities for all alarms per VccTp." ::= { sheAdslVccTpEntry 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.25.1.11 sheAdslVccTpEgressQosClass OBJECT-TYPE SYNTAX SheAdslAtmQosType MAX-ACCESS read-only STATUS current DESCRIPTION "Egress Qos Type" DEFVAL { 1 } ::= { sheAdslVccTpEntry 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.25.1.12 sheAdslVccTpEgressPeakCellRate OBJECT-TYPE SYNTAX Unsigned32 (0..365000) UNITS "cell/second" MAX-ACCESS read-only STATUS current DESCRIPTION "Valid when sheAdslVccTpEgressQosClass is not unshaped" ::= { sheAdslVccTpEntry 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.25.1.13 sheAdslVccTpEgressSustainedCellRate OBJECT-TYPE SYNTAX Unsigned32 (0..365000) UNITS "cell/second" MAX-ACCESS read-only STATUS current DESCRIPTION "Valid when sheAdslVccTpEgressQosClass is shapingRtVbr or shapingNrtVbr" ::= { sheAdslVccTpEntry 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.25.1.14 sheAdslVccTpEgressMaxBurstSize OBJECT-TYPE SYNTAX Unsigned32 (0..1073741824) UNITS "cell" MAX-ACCESS read-only STATUS current DESCRIPTION "Valid when sheAdslVccTpEgressQosClass is shapingRtVbr or shapingNrtVbr" ::= { sheAdslVccTpEntry 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.25.1.15 sheAdslVccTpEgressWeight OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "Valid only when sheAdslVccTpEgressQosClass is unshaped." ::= { sheAdslVccTpEntry 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.25.1.16 sheAdslVccTpIngressSustainedCellRate OBJECT-TYPE SYNTAX Unsigned32 (0..365000) UNITS "cell/second" MAX-ACCESS read-only STATUS current DESCRIPTION "GFR scr for ingress policing" ::= { sheAdslVccTpEntry 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.25.1.17 sheAdslVccTpIngressMaxBurstSize OBJECT-TYPE SYNTAX Unsigned32 (0..1073741824) UNITS "cell" MAX-ACCESS read-only STATUS current DESCRIPTION "GFR mbs for ingress policing" ::= { sheAdslVccTpEntry 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.25.1.18 sheAdslVccTpAdminState OBJECT-TYPE SYNTAX SheAdslEnableType MAX-ACCESS read-only STATUS current DESCRIPTION "Enable/disable single VccTp. Default value is enabled." DEFVAL { 1 } ::= { sheAdslVccTpEntry 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.25.1.19 sheAdslVccTpOrl OBJECT-TYPE SYNTAX Unsigned32 (0 | 64..29952) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "The output rate limiting value. This value is only valid for the default VccTp-entry's with VccTp-Number 1. All other will show a 0 and could not be modified." DEFVAL { 24000 } ::= { sheAdslVccTpEntry 19 } sheAdslVccTpUsedDslChannel OBJECT-TYPE SYNTAX SheAdslConfLineType MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute defines the usage of a dsl bearer channel by this VccTp. The availability of dsl channels depends on the configuration of the underlaying adsl line (VccTpSublayerIndex points to this line). Valid values for configuration: fastOnly(2) - only in dualLatency mode available interleavedOnly(3) - only in dualLatency mode available If singleLatency mode is used on the underlaying dslInterface, the port will select the available channel for all existing VccTP's automaticaly. Note: Depending on the used AdslLineProfile configuration, the following scenarios are possible: 1. default state: ->line uses interleaved channel only ->VccTp's uses always the available channel. ->A modification of sheAdslVccTpUsedDslChannel will be rejected! 2. modify line profile ->line uses fast channel only ->VccTp's uses always the available channel. ->CXU send notifications. ->A modification of sheAdslVccTpUsedDslChannel will be rejected! 3. modify line profile ->line uses dualLatency ->VccTp's uses the same channel as before. 4. modify VccTp entry ->line uses dualLatency ->the slected VccTp uses fast or interleaved channel only according to the configuration. ->A setting of value fastOrInterleaved(4) will be rejected. 5. modify line profile ->line goes back to use interleaved channel only ->VccTp's uses the interleaved channel ->notification will be send if a change is needed. " ::= { sheAdslVccTpEntry 20 } sheAdslVccTpEncapsulation OBJECT-TYPE SYNTAX SheAdslAtmEncapType MAX-ACCESS read-only STATUS current DESCRIPTION "Used encapsulation type over AAL5 for this VccTp." DEFVAL { llc } ::= { sheAdslVccTpEntry 21 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.26 sheAdslVccTpControl OBJECT IDENTIFIER ::= { sheAdslLineMIB 26 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.26.1 sheAdslVccTpControlRequest OBJECT-TYPE SYNTAX SheAdslControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "createAdslVccTp: sheAdslVccTpControlSubLayerIndex sheAdslVccTpControlVpi sheAdslVccTpControlVci deleteAdslVccTp: sheAdslVccTpControlIndex modifyAdslVccTp: sheAdslVccTpControlIndex sheAdslVccTpControlVpi sheAdslVccTpControlVci sheAdslVccTpControlAlarmSeverityIndex modifyAdslVccTpLoopTest: sheAdslVccTpControlIndex sheAdslVccTpControlLoopTest modifyAdslVccTpEgressShaping: sheAdslVccTpControlIndex sheAdslVccTpControlEgressQosClass sheAdslVccTpControlEgressPeakCellRate sheAdslVccTpControlEgressSustainedCellRate sheAdslVccTpControlEgressMaxBurstSize sheAdslVccTpControlEgressWeight modifyAdslVccTpIngressPolicing: sheAdslVccTpControlIndex sheAdslVccTpControlIngressSustainedCellRate sheAdslVccTpControlIngressMaxBurstSize modifyAdslVccTpAdminState: sheAdslVccTpControlIndex sheAdslVccTpControlAdminState modifyAdslVccTpOrl: sheAdslVccTpControlIndex sheAdslVccTpControlOrl Only in dualLatency mode possible!! modifyAdslVccTpUsedDslChannel: sheAdslVccTpControlIndex sheAdslVccTpControlUsedDslChannel ## New for R2.6 deleteAdslVccTpPerformanceCounters: sheAdslVccTpControlIndex modifyAdslVccTpEncap: sheAdslVccTpControlIndex sheAdslVccTpControlEncapsulation" ::= { sheAdslVccTpControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.26.2 sheAdslVccTpControlIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Index of the Table-entry to be configured." ::= { sheAdslVccTpControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.26.3 sheAdslVccTpControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. " ::= { sheAdslVccTpControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.26.4 sheAdslVccTpControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. " ::= { sheAdslVccTpControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.26.5 sheAdslVccTpControlReqResult OBJECT-TYPE SYNTAX SheAdslControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheAdslVccTpControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.26.6 sheAdslVccTpControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheAdslVccTpControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.26.7 sheAdslVccTpControlSubLayerIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { sheAdslVccTpControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.26.9 sheAdslVccTpControlVpi OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Vpi" ::= { sheAdslVccTpControl 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.26.10 sheAdslVccTpControlVci OBJECT-TYPE SYNTAX Integer32 (32..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Vci" ::= { sheAdslVccTpControl 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.26.11 sheAdslVccTpControlLoopTest OBJECT-TYPE SYNTAX SheAdslOamLoopTestType MAX-ACCESS read-write STATUS current DESCRIPTION "Actual LoopTest-Value. Only None or endToEnd will be accepted." ::= { sheAdslVccTpControl 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.26.12 sheAdslVccTpControlAlarmSeverityIndex OBJECT-TYPE SYNTAX SheAlarmSevProfileIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Index of the used AlarmSeverityProfile." ::= { sheAdslVccTpControl 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.26.13 sheAdslVccTpControlEgressQosClass OBJECT-TYPE SYNTAX SheAdslAtmQosType MAX-ACCESS read-write STATUS current DESCRIPTION "Egress QoS Type." ::= { sheAdslVccTpControl 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.26.14 sheAdslVccTpControlEgressPeakCellRate OBJECT-TYPE SYNTAX Unsigned32 (0..365000) UNITS "cell/second" MAX-ACCESS read-write STATUS current DESCRIPTION "Valid when sheAdslVccTpEgressQosClass is not unshaped" ::= { sheAdslVccTpControl 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.26.15 sheAdslVccTpControlEgressSustainedCellRate OBJECT-TYPE SYNTAX Unsigned32 (0..365000) UNITS "cell/second" MAX-ACCESS read-write STATUS current DESCRIPTION "Valid when sheAdslVccTpEgressQosClass is shapingRtVbr or shapingNrtVbr" ::= { sheAdslVccTpControl 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.26.16 sheAdslVccTpControlEgressMaxBurstSize OBJECT-TYPE SYNTAX Unsigned32 (0..1073741824) UNITS "cell" MAX-ACCESS read-write STATUS current DESCRIPTION "Valid when sheAdslVccTpEgressQosClass is shapingRtVbr or shapingNrtVbr" ::= { sheAdslVccTpControl 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.26.17 sheAdslVccTpControlEgressWeight OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS read-write STATUS current DESCRIPTION "Valid only when sheAdslVccTpEgressQosClass is unshaped." ::= { sheAdslVccTpControl 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.26.18 sheAdslVccTpControlIngressSustainedCellRate OBJECT-TYPE SYNTAX Unsigned32 (0..365000) UNITS "cell/second" MAX-ACCESS read-write STATUS current DESCRIPTION "GFR scr for ingress policing" ::= { sheAdslVccTpControl 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.26.19 sheAdslVccTpControlIngressMaxBurstSize OBJECT-TYPE SYNTAX Unsigned32 (0..1073741824) UNITS "cell" MAX-ACCESS read-write STATUS current DESCRIPTION "GFR mbs for ingress policing" ::= { sheAdslVccTpControl 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.26.20 sheAdslVccTpControlAdminState OBJECT-TYPE SYNTAX SheAdslEnableType MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheAdslVccTpControl 20 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.26.21 sheAdslVccTpControlOrl OBJECT-TYPE SYNTAX Unsigned32 (64..29952) UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheAdslVccTpControl 21 } sheAdslVccTpControlUsedDslChannel OBJECT-TYPE SYNTAX SheAdslConfLineType MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute defines the usage of a dsl bearer channel by this VccTp. The availability of dsl channels depends on the configuration of the underlaying adsl line (VccTpSublayerIndex points to this line). Valid values for configuration: fastOnly(2) - only in dualLatency mode available interleavedOnly(3) - only in dualLatency mode available In singleLatency mode , no configuration is possible. " ::= { sheAdslVccTpControl 22 } sheAdslVccTpControlEncapsulation OBJECT-TYPE SYNTAX SheAdslAtmEncapType MAX-ACCESS read-write STATUS current DESCRIPTION "Encapsulation type over AAL5." ::= { sheAdslVccTpControl 23 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.27 sheAdslVccTpNotifications OBJECT IDENTIFIER ::= { sheAdslLineMIB 27 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.27.1 sheAdslVccTpCreated NOTIFICATION-TYPE OBJECTS { sheAdslVccTpControlIndex, sheAdslVccTpNumber, sheAdslVccTpControlTimeStamp, sheAdslVccTpControlVpi, sheAdslVccTpControlVci, sheAdslVccTpControlAlarmSeverityIndex, sheAdslVccTpControlSubLayerIndex, sheAdslVccTpControlLoopTest, sheAdslVccTpControlOrl, sheAdslVccTpControlAdminState } STATUS current DESCRIPTION "Configuration notification." ::= { sheAdslVccTpNotifications 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.27.2 sheAdslVccTpModified NOTIFICATION-TYPE OBJECTS { sheAdslVccTpControlIndex, sheAdslVccTpControlTimeStamp, sheAdslVccTpControlVpi, sheAdslVccTpControlVci, sheAdslVccTpControlLoopTest, sheAdslVccTpControlAlarmSeverityIndex } STATUS current DESCRIPTION "Configuration notification." ::= { sheAdslVccTpNotifications 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.27.3 sheAdslVccTpDeleted NOTIFICATION-TYPE OBJECTS { sheAdslVccTpControlIndex, sheAdslVccTpControlTimeStamp } STATUS current DESCRIPTION "Configuration notification." ::= { sheAdslVccTpNotifications 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.27.4 sheAdslVccRDIAlarm NOTIFICATION-TYPE OBJECTS { sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity } STATUS current DESCRIPTION "RDI detected." ::= { sheAdslVccTpNotifications 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.27.5 sheAdslVccAISAlarm NOTIFICATION-TYPE OBJECTS { sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity } STATUS current DESCRIPTION "AIS detected. " ::= { sheAdslVccTpNotifications 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.27.6 sheAdslVccTpConfigurationFailed NOTIFICATION-TYPE OBJECTS { sheAdslVccTpControlRequest, sheAdslVccTpControlIndex, sheAdslVccTpControlTimeStamp, sheAdslVccTpControlStatus, sheAdslVccTpControlReqResult, sheAdslVccTpControlSubLayerIndex } STATUS current DESCRIPTION "Notification in case of failed VccTp-Configuration." ::= { sheAdslVccTpNotifications 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.27.7 sheAdslVccTpChangedEgressShaping NOTIFICATION-TYPE OBJECTS { sheAdslVccTpControlIndex, sheAdslVccTpControlEgressQosClass, sheAdslVccTpControlEgressPeakCellRate, sheAdslVccTpControlEgressSustainedCellRate, sheAdslVccTpControlEgressMaxBurstSize, sheAdslVccTpControlEgressWeight } STATUS current DESCRIPTION "ATM egress shaping paramters were changed." ::= { sheAdslVccTpNotifications 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.27.8 sheAdslVccTpChangedIngressPolicing NOTIFICATION-TYPE OBJECTS { sheAdslVccTpControlIndex, sheAdslVccTpControlIngressSustainedCellRate, sheAdslVccTpControlIngressMaxBurstSize } STATUS current DESCRIPTION "ATM ingress policing paramters were changed." ::= { sheAdslVccTpNotifications 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.27.9 sheAdslVccTpAdminStateChanged NOTIFICATION-TYPE OBJECTS { sheAdslVccTpControlIndex, sheAdslVccTpControlTimeStamp, sheAdslVccTpControlAdminState } STATUS current DESCRIPTION "Configuration notification." ::= { sheAdslVccTpNotifications 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.27.10 sheAdslVccTpOrlChanged NOTIFICATION-TYPE OBJECTS { sheAdslVccTpControlIndex, sheAdslVccTpControlTimeStamp, sheAdslVccTpControlOrl } STATUS current DESCRIPTION "Configuration trap." ::= { sheAdslVccTpNotifications 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.27.10 sheAdslVccTpUsedDslChannelChanged NOTIFICATION-TYPE OBJECTS { sheAdslVccTpControlIndex, sheAdslVccTpControlTimeStamp, sheAdslVccTpControlUsedDslChannel } STATUS current DESCRIPTION "Modification trap." ::= { sheAdslVccTpNotifications 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.27.3 sheAdslVccTpPerformanceCountersCleared NOTIFICATION-TYPE OBJECTS { sheAdslVccTpControlIndex, sheAdslVccTpControlTimeStamp } STATUS current DESCRIPTION "Configuration notification." ::= { sheAdslVccTpNotifications 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.27.3 sheAdslVccTpEncapsulationChanged NOTIFICATION-TYPE OBJECTS { sheAdslVccTpControlIndex, sheAdslVccTpControlTimeStamp, sheAdslVccTpControlEncapsulation } STATUS current DESCRIPTION "Configuration notification." ::= { sheAdslVccTpNotifications 13 } -- RFI BAND -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.29 sheAdslRfiBandTable OBJECT-TYPE SYNTAX SEQUENCE OF SheAdslRfiBandEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The RFI Band Table." ::= { sheAdslLineMIB 29 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.29.1 sheAdslRfiBandEntry OBJECT-TYPE SYNTAX SheAdslRfiBandEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains RFI band configuration. For more details, refer ITU-T G.992.5 and ITU-T G.997.1." INDEX { sheAdslRfiBandIndex } ::= { sheAdslRfiBandTable 1 } SheAdslRfiBandEntry ::= SEQUENCE { sheAdslRfiBandIndex Integer32, sheAdslRfiBandName OCTET STRING, sheAdslRfiBandStartTone Integer32, sheAdslRfiBandStopTone Integer32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.29.1.1 sheAdslRfiBandIndex OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS read-only STATUS current DESCRIPTION "Table Index, automatically generated when the table is created. This is used as Bit mask index of sheAdslLineConfExtnProfileRfiBandMask" ::= { sheAdslRfiBandEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.29.1.2 sheAdslRfiBandName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "A descriptional name for the RFI band. Special characters are not allowed, like: space : ?" ::= { sheAdslRfiBandEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.29.1.3 sheAdslRfiBandStartTone OBJECT-TYPE SYNTAX Integer32 (1..512) MAX-ACCESS read-only STATUS current DESCRIPTION "The start subcarrier index belonging to breakpoint:[ti;ti+1], corresponding to the low level of notch." ::= { sheAdslRfiBandEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.29.1.4 sheAdslRfiBandStopTone OBJECT-TYPE SYNTAX Integer32 (1..512) MAX-ACCESS read-only STATUS current DESCRIPTION "The stop subcarrier index belonging to breakpoint:[ti;ti+1], corresponding to the low level of notch." ::= { sheAdslRfiBandEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.30 sheAdslRfiBandControl OBJECT IDENTIFIER ::= { sheAdslLineMIB 30 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.30.1 sheAdslRfiBandControlRequest OBJECT-TYPE SYNTAX SheAdslControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "createAdslRfiBand: sheAdslRfiBandControlName sheAdslRfiBandControlStartTone sheAdslRfiBandControlStopTone deleteAdslRfiBand: sheAdslRfiBandControlIndex" ::= { sheAdslRfiBandControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.30.2 sheAdslRfiBandControlIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Index of the Table-entry to be configured." ::= { sheAdslRfiBandControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.30.3 sheAdslRfiBandControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. " ::= { sheAdslRfiBandControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.30.4 sheAdslRfiBandControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. " ::= { sheAdslRfiBandControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.30.5 sheAdslRfiBandControlReqResult OBJECT-TYPE SYNTAX SheAdslControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheAdslRfiBandControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.30.6 sheAdslRfiBandControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheAdslRfiBandControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.30.7 sheAdslRfiBandControlName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "A descriptional name for the RFI band." ::= { sheAdslRfiBandControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.30.8 sheAdslRfiBandControlStartTone OBJECT-TYPE SYNTAX Integer32 (1..512) MAX-ACCESS read-write STATUS current DESCRIPTION "The start subcarrier index belonging to breakpoint:[ti;ti+1], corresponding to the low level of notch." ::= { sheAdslRfiBandControl 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.30.9 sheAdslRfiBandControlStopTone OBJECT-TYPE SYNTAX Integer32 (1..512) MAX-ACCESS read-write STATUS current DESCRIPTION "The stop subcarrier index belonging to breakpoint:[ti;ti+1], corresponding to the low level of notch." ::= { sheAdslRfiBandControl 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.31 sheAdslRfiBandNotifications OBJECT IDENTIFIER ::= { sheAdslLineMIB 31 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.31.1 sheAdslRfiBandCreated NOTIFICATION-TYPE OBJECTS { sheAdslRfiBandControlIndex, sheAdslRfiBandControlName, sheAdslRfiBandControlStartTone, sheAdslRfiBandControlStopTone } STATUS current DESCRIPTION "When an ADSL RFI Band is created, it occurs." ::= { sheAdslRfiBandNotifications 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.31.2 sheAdslRfiBandDeleted NOTIFICATION-TYPE OBJECTS { sheAdslRfiBandControlIndex } STATUS current DESCRIPTION "When an ADSL RFI Band is removed, it occurs." ::= { sheAdslRfiBandNotifications 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.32 sheAdslAtucPsdRefMasks OBJECT IDENTIFIER ::= { sheAdslLineMIB 32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.32.1 sheAdslAtucPsdRefMaskAdsl2AnnexA OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6..96)) MAX-ACCESS read-only STATUS current DESCRIPTION " < PSD reference mask data format description > PSD mask can be described with a set of breakpoints. Breakpoint is a pair of tone index and PSD level. Number of maximum breakpoint is 32. All variable in this format is network byte order (big endian). < Data field of PSD reference mask > Breakpoint# tone index : tone index for breakpoint. Valid range is 1~255 for sheAdslAtucPsdRefMaskAdsl2AnnexA, sheAdslAtucPsdRefMaskAdsl2AnnexB and sheAdslAtucPsdRefMaskAnnexL, 1-511 for sheAdslAtucPsdRefMaskAdsl2plusAnnexA and sheAdslAtucPsdRefMaskAdsl2plusAnnexB. Breakpoint# PSD level : According to ITU-T G.997.1, the PSD maks level shall be coded as an unsigned integer represening PSD levels 0dBm/Hz (coded as 0) to -127.5 dBm/Hz (coded as 255), in the steps of 0.5dBm/Hz, with valid range 0 to -95dBm/Hz. So Valid value range is 0~190. Tone index of first breakpoint should be 1. Tone index of last valid breakpoint should be 255 in case of Adsl2AnnexA, Adsl2AnnexB, AnnexL. And should be 511 for Adsl2plusAnnexA, Adsl2plusAnnexB case Breakpoint should be alligned with increasing tone order. < PSD Reference mask data format (Maximum 128 bytes) > Breakpoint1 tone index (2bytes) Breakpoint1 PSD level (1bytes) Breakpoint2 tone index (2bytes) Breakpoint2 PSD level (1bytes) Breakpoint3 tone index (2bytes) Breakpoint3 PSD level (1bytes) Breakpoint32 tone index (2bytes) Breakpoint32 PSD level (1bytes) " ::= { sheAdslAtucPsdRefMasks 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.32.2 sheAdslAtucPsdRefMaskAdsl2AnnexB OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6..96)) MAX-ACCESS read-only STATUS current DESCRIPTION "Refer to the sheAdslAtucPsdRefMaskAdsl2AnnexA description." ::= { sheAdslAtucPsdRefMasks 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.32.3 sheAdslAtucPsdRefMaskAdsl2plusAnnexA OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6..96)) MAX-ACCESS read-only STATUS current DESCRIPTION "Refer to the sheAdslAtucPsdRefMaskAdsl2AnnexA description." ::= { sheAdslAtucPsdRefMasks 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.32.4 sheAdslAtucPsdRefMaskAdsl2plusAnnexB OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6..96)) MAX-ACCESS read-only STATUS current DESCRIPTION "Refer to the sheAdslAtucPsdRefMaskAdsl2AnnexA description." ::= { sheAdslAtucPsdRefMasks 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.32.5 sheAdslAtucPsdRefMaskAnnexL OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6..96)) MAX-ACCESS read-only STATUS current DESCRIPTION "Refer to the sheAdslAtucPsdRefMaskAdsl2AnnexA description" ::= { sheAdslAtucPsdRefMasks 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.33 sheAdslAtucDualChanTable OBJECT-TYPE SYNTAX SEQUENCE OF SheAdslAtucDualChanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides one row for each ATUC channel. Only supported by NE R2.5 and higher." ::= { sheAdslLineMIB 33 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.33.1 sheAdslAtucDualChanEntry OBJECT-TYPE SYNTAX SheAdslAtucDualChanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the adslAtucChanTable. New table only supported by NE releases up R2.5. Indexed by ifIndex - ChanType." INDEX { ifIndex, sheAdslAtucDualChanType } ::= { sheAdslAtucDualChanTable 1 } SheAdslAtucDualChanEntry ::= SEQUENCE { sheAdslAtucDualChanInterleaveDelay Gauge32, sheAdslAtucDualChanCurrTxRate Gauge32, sheAdslAtucDualChanPrevTxRate Gauge32, sheAdslAtucDualChanCrcBlockLength Gauge32, sheAdslAtucDualChanCurrAtmStatus SheAdslLineAtmStatus, sheAdslAtucDualChanRsSymbols Unsigned32, sheAdslAtucDualChanRsDepth Unsigned32, sheAdslAtucDualChanRsRedundancy Unsigned32, sheAdslAtucDualChanType SheAdslChannelType } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.33.1.1 sheAdslAtucDualChanInterleaveDelay OBJECT-TYPE SYNTAX Gauge32 UNITS "milli-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. Larger numbers provide greater separation between consecutive input bytes in the output bit stream allowing for improved impulse noise immunity at the expense of payload latency. In the case where the ifType is Fast(125), use noSuchObject." ::= { sheAdslAtucDualChanEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.33.1.2 sheAdslAtucDualChanCurrTxRate OBJECT-TYPE SYNTAX Gauge32 (1..32736) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual transmit rate on this channel." ::= { sheAdslAtucDualChanEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.33.1.3 sheAdslAtucDualChanPrevTxRate OBJECT-TYPE SYNTAX Gauge32 (1..32736) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at the time of the last adslAtucRateChangeTrap event. It is also set at initialization to prevent a trap being sent. Rate changes less than adslAtucThresh(*)RateDown or less than adslAtucThresh(*)RateUp will not cause a trap or cause this object to change. (*) == Fast or Interleave. See AdslLineAlarmConfProfileEntry." ::= { sheAdslAtucDualChanEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.33.1.4 sheAdslAtucDualChanCrcBlockLength OBJECT-TYPE SYNTAX Gauge32 UNITS "byte" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the length of the channel data-block on which the CRC operates. Refer to Line Code Specific MIBs, [11] and [12] for more information." ::= { sheAdslAtucDualChanEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.33.1.5 sheAdslAtucDualChanCurrAtmStatus OBJECT-TYPE SYNTAX SheAdslLineAtmStatus MAX-ACCESS read-only STATUS current DESCRIPTION "indicates an ncd or lcd failure if the counter surpasses 127. If neither ATM counter surpasses 127, the return value will be 'NoAtmDefect'. noAtmDefect(0), noCellDeleniation(1), lossOfCellDeleniation(2) " ::= { sheAdslAtucDualChanEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.33.1.6 sheAdslAtucDualChanRsSymbols OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates number of DMT symbols per Reed-Solomon code word (S) in the downstream direction. Note that S is not restricted to interleaved mode only. Even in fast mode, S is a valid constant value and is equal to 1." ::= { sheAdslAtucDualChanEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.33.1.7 sheAdslAtucDualChanRsDepth OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates interleaving depth (D) in the downstream direction. Note that D is not restricted to interleaved mode only. Even in fast mode, D is a valid constant value and is equal to 1." ::= { sheAdslAtucDualChanEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.33.1.8 sheAdslAtucDualChanRsRedundancy OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates number of redundant bytes (R) per Reed-Solomon code in the downstream direction." ::= { sheAdslAtucDualChanEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.33.1.9 sheAdslAtucDualChanType OBJECT-TYPE SYNTAX SheAdslChannelType MAX-ACCESS read-only STATUS current DESCRIPTION "Explains the type of channel entry interleaved or fast! (1) interleaved channel (2) fast channel" ::= { sheAdslAtucDualChanEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.34 sheAdslAturDualChanTable OBJECT-TYPE SYNTAX SEQUENCE OF SheAdslAturDualChanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides one row for each ATUR channel. Only supported by NE R2.5 and higher." ::= { sheAdslLineMIB 34 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.34.1 sheAdslAturDualChanEntry OBJECT-TYPE SYNTAX SheAdslAturDualChanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the adslAturChanTable. New table only supported by NE releases up R2.5. Indexed by ifIndex - ChanType." INDEX { ifIndex, sheAdslAturDualChanType } ::= { sheAdslAturDualChanTable 1 } SheAdslAturDualChanEntry ::= SEQUENCE { sheAdslAturDualChanInterleaveDelay Gauge32, sheAdslAturDualChanCurrTxRate Gauge32, sheAdslAturDualChanPrevTxRate Gauge32, sheAdslAturDualChanCrcBlockLength Gauge32, sheAdslAturDualChanCurrAtmStatus SheAdslLineAtmStatus, sheAdslAturDualChanRsSymbols Unsigned32, sheAdslAturDualChanRsDepth Unsigned32, sheAdslAturDualChanRsRedundancy Unsigned32, sheAdslAturDualChanType SheAdslChannelType } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.34.1.1 sheAdslAturDualChanInterleaveDelay OBJECT-TYPE SYNTAX Gauge32 UNITS "milli-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. Larger numbers provide greater separation between consecutive input bytes in the output bit stream allowing for improved impulse noise immunity at the expense of payload latency. In the case where the ifType is Fast(125), use noSuchObject." ::= { sheAdslAturDualChanEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.34.1.2 sheAdslAturDualChanCurrTxRate OBJECT-TYPE SYNTAX Gauge32 (1..32736) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual transmit rate on this channel." ::= { sheAdslAturDualChanEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.34.1.3 sheAdslAturDualChanPrevTxRate OBJECT-TYPE SYNTAX Gauge32 (1..32736) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at the time of the last adslAturRateChangeTrap event. It is also set at initialization to prevent a trap being sent. Rate changes less than adslAturThresh(*)RateDown or less than adslAturThresh(*)RateUp will not cause a trap or cause this object to change. (*) == Fast or Interleave. See AdslLineAlarmConfProfileEntry." ::= { sheAdslAturDualChanEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.34.1.4 sheAdslAturDualChanCrcBlockLength OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the length of the channel data-block on which the CRC operates. Refer to Line Code Specific MIBs, [11] and [12] for more information." ::= { sheAdslAturDualChanEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.34.1.5 sheAdslAturDualChanCurrAtmStatus OBJECT-TYPE SYNTAX SheAdslLineAtmStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates an ncd or lcd failure if the counter surpasses 127. If neither ATM counter surpasses 127, the return value will be NoAtmDefect. noAtmDefect(0), noCellDeleniation(1), lossOfCellDeleniation(2) " ::= { sheAdslAturDualChanEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.34.1.6 sheAdslAturDualChanRsSymbols OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates number of DMT symbols per Reed- Solomon code word (S) in the upstream direction Note that S is not restricted to interleaved mode only. Even in fast mode, S is a valid constant value and is equal to 1." ::= { sheAdslAturDualChanEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.34.1.7 sheAdslAturDualChanRsDepth OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates interleaving depth (D) in the upstream direction Note that D is not restricted to interleaved mode only. Even in fast mode, D is a valid constant value and is equal to 1." ::= { sheAdslAturDualChanEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.34.1.8 sheAdslAturDualChanRsRedundancy OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates number of redundant bytes (R) per Reed-Solomon code in the upstream direction." ::= { sheAdslAturDualChanEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.34.1.9 sheAdslAturDualChanType OBJECT-TYPE SYNTAX SheAdslChannelType MAX-ACCESS read-only STATUS current DESCRIPTION "Explains the type of channel entry interleaved or fast! (1) interleaved channel (2) fast channel" ::= { sheAdslAturDualChanEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35 -- performance group -- -- Note: block is intended to be the length of the channel -- data-block on which the CRC operates. See -- adslAtucDualChanCrcBlockLength for more information. sheAdslAtucDualChanPerfDataTable OBJECT-TYPE SYNTAX SEQUENCE OF SheAdslAtucDualChanPerfDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides one row for each ATUC channel. Only supported by NE R2.5 and higher." ::= { sheAdslLineMIB 35 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35.1 sheAdslAtucDualChanPerfDataEntry OBJECT-TYPE SYNTAX SheAdslAtucDualChanPerfDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in adslAtucChanPerfDataTable. New table only supported by NE releases up R2.5. Indexed by ifIndex - ChanType." INDEX { ifIndex, sheAdslAtucDualChanType } ::= { sheAdslAtucDualChanPerfDataTable 1 } SheAdslAtucDualChanPerfDataEntry ::= SEQUENCE { sheAdslAtucDualChanPerfDataTimeElapsed Gauge32, sheAdslAtucDualChanPerfDataReceivedBlks Counter32, sheAdslAtucDualChanPerfDataTransmittedBlks Counter32, sheAdslAtucDualChanPerfDataCorrectedBlks Counter32, sheAdslAtucDualChanPerfDataUncorrectBlks Counter32, sheAdslAtucDualChanPerfDataNcd Gauge32, sheAdslAtucDualChanPerfDataOcd Gauge32, sheAdslAtucDualChanPerfDataHec Gauge32, sheAdslAtucDualChanPerfDataValidIntervals INTEGER, sheAdslAtucDualChanPerfDataInvalidIntervals INTEGER, sheAdslAtucDualChanPerfDataCurr15MinTimeElapsed AdslPerfTimeElapsed, sheAdslAtucDualChanPerfDataCurr15MinReceivedBlks PerfCurrentCount, sheAdslAtucDualChanPerfDataCurr15MinTransmittedBlks PerfCurrentCount, sheAdslAtucDualChanPerfDataCurr15MinCorrectedBlks PerfCurrentCount, sheAdslAtucDualChanPerfDataCurr15MinUncorrectBlks PerfCurrentCount, sheAdslAtucDualChanPerfDataCurr15MinNcd Gauge32, sheAdslAtucDualChanPerfDataCurr15MinOcd Gauge32, sheAdslAtucDualChanPerfDataCurr15MinHec Gauge32, sheAdslAtucDualChanPerfDataCurr1DayTimeElapsed AdslPerfTimeElapsed, sheAdslAtucDualChanPerfDataCurr1DayReceivedBlks AdslPerfCurrDayCount, sheAdslAtucDualChanPerfDataCurr1DayTransmittedBlks AdslPerfCurrDayCount, sheAdslAtucDualChanPerfDataCurr1DayCorrectedBlks AdslPerfCurrDayCount, sheAdslAtucDualChanPerfDataCurr1DayUncorrectBlks AdslPerfCurrDayCount, sheAdslAtucDualChanPerfDataCurr1DayNcd Gauge32, sheAdslAtucDualChanPerfDataCurr1DayOcd Gauge32, sheAdslAtucDualChanPerfDataCurr1DayHec Gauge32, sheAdslAtucDualChanPerfDataPrev1DayMoniSecs INTEGER, sheAdslAtucDualChanPerfDataPrev1DayReceivedBlks AdslPerfPrevDayCount, sheAdslAtucDualChanPerfDataPrev1DayTransmittedBlks AdslPerfPrevDayCount, sheAdslAtucDualChanPerfDataPrev1DayCorrectedBlks AdslPerfPrevDayCount, sheAdslAtucDualChanPerfDataPrev1DayUncorrectBlks AdslPerfPrevDayCount, sheAdslAtucDualChanPerfDataPrev1DayNcd Gauge32, sheAdslAtucDualChanPerfDataPrev1DayOcd Gauge32, sheAdslAtucDualChanPerfDataPrev1DayHec Gauge32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35.1.1 sheAdslAtucDualChanPerfDataTimeElapsed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION " Total elapsed seconds in this interval." ::= { sheAdslAtucDualChanPerfDataEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35.1.2 sheAdslAtucDualChanPerfDataReceivedBlks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks received on this channel since agent reset." ::= { sheAdslAtucDualChanPerfDataEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35.1.3 sheAdslAtucDualChanPerfDataTransmittedBlks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks transmitted on this channel since agent reset." ::= { sheAdslAtucDualChanPerfDataEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35.1.4 sheAdslAtucDualChanPerfDataCorrectedBlks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with errors that were corrected since agent reset. These blocks are passed on as good data." ::= { sheAdslAtucDualChanPerfDataEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35.1.5 sheAdslAtucDualChanPerfDataUncorrectBlks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with uncorrectable errors since agent reset." ::= { sheAdslAtucDualChanPerfDataEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35.1.6 sheAdslAtucDualChanPerfDataNcd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of no cell delineation(ncd) on this channel." ::= { sheAdslAtucDualChanPerfDataEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35.1.7 sheAdslAtucDualChanPerfDataOcd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of out of cell delineation (ocd) on this channel." ::= { sheAdslAtucDualChanPerfDataEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35.1.8 sheAdslAtucDualChanPerfDataHec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Header error check counter(hec) on this channel." ::= { sheAdslAtucDualChanPerfDataEntry 8 } -- general 15 min interval information -- -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35.1.9 sheAdslAtucDualChanPerfDataValidIntervals OBJECT-TYPE SYNTAX INTEGER (0..96) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of previous 15-minute intervals in the interval table for which data was collected. Given that is the maximum # of intervals supported. The value will be unless the measurement was (re-)started within the last (*15) minutes, in which case the value will be the number of complete 15 minute intervals for which the agent has at least some data. In certain cases (e.g., in the case where the agent is a proxy) it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available." ::= { sheAdslAtucDualChanPerfDataEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35.1.10 sheAdslAtucDualChanPerfDataInvalidIntervals OBJECT-TYPE SYNTAX INTEGER (0..96) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of intervals in the range from 0 to the value of adslAtucChanPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations)." ::= { sheAdslAtucDualChanPerfDataEntry 10 } -- 15 min current performance group -- -- -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35.1.11 sheAdslAtucDualChanPerfDataCurr15MinTimeElapsed OBJECT-TYPE SYNTAX AdslPerfTimeElapsed (0..899) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Total elapsed seconds in this interval." ::= { sheAdslAtucDualChanPerfDataEntry 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35.1.12 sheAdslAtucDualChanPerfDataCurr15MinReceivedBlks OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks received on this channel within the current 15 minute interval." ::= { sheAdslAtucDualChanPerfDataEntry 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35.1.13 sheAdslAtucDualChanPerfDataCurr15MinTransmittedBlks OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks transmitted on this channel within the current 15 minute interval." ::= { sheAdslAtucDualChanPerfDataEntry 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35.1.14 sheAdslAtucDualChanPerfDataCurr15MinCorrectedBlks OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with errors that were corrected on this channel within the current 15 minute interval." ::= { sheAdslAtucDualChanPerfDataEntry 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35.1.15 sheAdslAtucDualChanPerfDataCurr15MinUncorrectBlks OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with uncorrectable errors on this channel within the current 15 minute interval." ::= { sheAdslAtucDualChanPerfDataEntry 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35.1.16 sheAdslAtucDualChanPerfDataCurr15MinNcd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of no cell delineation(ncd) on this channel within the current 15 minute time interval." ::= { sheAdslAtucDualChanPerfDataEntry 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35.1.17 sheAdslAtucDualChanPerfDataCurr15MinOcd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of out of cell delineation (ocd) on this channel within the current 15 minute time interval." ::= { sheAdslAtucDualChanPerfDataEntry 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35.1.18 sheAdslAtucDualChanPerfDataCurr15MinHec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Header error check counter(hec) on this channel within the current 15 minute time interval." ::= { sheAdslAtucDualChanPerfDataEntry 18 } -- 1-day current and previous performance group -- -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35.1.19 sheAdslAtucDualChanPerfDataCurr1DayTimeElapsed OBJECT-TYPE SYNTAX AdslPerfTimeElapsed (0..86399) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds that have elapsed since the beginning of the current 1-day interval." ::= { sheAdslAtucDualChanPerfDataEntry 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35.1.20 sheAdslAtucDualChanPerfDataCurr1DayReceivedBlks OBJECT-TYPE SYNTAX AdslPerfCurrDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks received on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed." ::= { sheAdslAtucDualChanPerfDataEntry 20 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35.1.21 sheAdslAtucDualChanPerfDataCurr1DayTransmittedBlks OBJECT-TYPE SYNTAX AdslPerfCurrDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks transmitted on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed." ::= { sheAdslAtucDualChanPerfDataEntry 21 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35.1.22 sheAdslAtucDualChanPerfDataCurr1DayCorrectedBlks OBJECT-TYPE SYNTAX AdslPerfCurrDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with errors that were corrected on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed." ::= { sheAdslAtucDualChanPerfDataEntry 22 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35.1.23 sheAdslAtucDualChanPerfDataCurr1DayUncorrectBlks OBJECT-TYPE SYNTAX AdslPerfCurrDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with uncorrectable errors on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed." ::= { sheAdslAtucDualChanPerfDataEntry 23 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35.1.24 sheAdslAtucDualChanPerfDataCurr1DayNcd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of no cell delineation (ncd) on this channel within the current 1 day time interval." ::= { sheAdslAtucDualChanPerfDataEntry 24 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35.1.25 sheAdslAtucDualChanPerfDataCurr1DayOcd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of out of cell delineation (ocd) on this channel within the current 1 day time interval." ::= { sheAdslAtucDualChanPerfDataEntry 25 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35.1.26 sheAdslAtucDualChanPerfDataCurr1DayHec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Header error check counter (hec) on this channel within the current 1 day time interval." ::= { sheAdslAtucDualChanPerfDataEntry 26 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35.1.27 sheAdslAtucDualChanPerfDataPrev1DayMoniSecs OBJECT-TYPE SYNTAX INTEGER (0..86400) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monitoring data could not be collected for any reason." ::= { sheAdslAtucDualChanPerfDataEntry 27 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35.1.28 sheAdslAtucDualChanPerfDataPrev1DayReceivedBlks OBJECT-TYPE SYNTAX AdslPerfPrevDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks received on this channel within the most recent previous 1-day period." ::= { sheAdslAtucDualChanPerfDataEntry 28 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35.1.29 sheAdslAtucDualChanPerfDataPrev1DayTransmittedBlks OBJECT-TYPE SYNTAX AdslPerfPrevDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks transmitted on this channel within the most recent previous 1-day period." ::= { sheAdslAtucDualChanPerfDataEntry 29 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35.1.30 sheAdslAtucDualChanPerfDataPrev1DayCorrectedBlks OBJECT-TYPE SYNTAX AdslPerfPrevDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with errors that were corrected on this channel within the most recent previous 1-day period." ::= { sheAdslAtucDualChanPerfDataEntry 30 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35.1.31 sheAdslAtucDualChanPerfDataPrev1DayUncorrectBlks OBJECT-TYPE SYNTAX AdslPerfPrevDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with uncorrectable errors on this channel within the most recent previous 1-day period." ::= { sheAdslAtucDualChanPerfDataEntry 31 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35.1.32 sheAdslAtucDualChanPerfDataPrev1DayNcd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of no cell delineation (ncd) on this channel within the most recent previous 1-day period." ::= { sheAdslAtucDualChanPerfDataEntry 32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35.1.33 sheAdslAtucDualChanPerfDataPrev1DayOcd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of out of cell delineation (ocd) on this channel within the most recent previous 1-day period." ::= { sheAdslAtucDualChanPerfDataEntry 33 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.35.1.34 sheAdslAtucDualChanPerfDataPrev1DayHec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Header error check counter(hec) on this channel within the most recent previous 1-day period." ::= { sheAdslAtucDualChanPerfDataEntry 34 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.36 sheAdslAturDualChanPerfDataTable OBJECT-TYPE SYNTAX SEQUENCE OF SheAdslAturDualChanPerfDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides one row for each ATUR channel. Only supported by NE R2.5 and higher." ::= { sheAdslLineMIB 36 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.36.1 sheAdslAturDualChanPerfDataEntry OBJECT-TYPE SYNTAX SheAdslAturDualChanPerfDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in adslAturChanPerfDataTable. New table only supported by NE releases up R2.5. Indexed by ifIndex - ChanType." INDEX { ifIndex, sheAdslAturDualChanType } ::= { sheAdslAturDualChanPerfDataTable 1 } SheAdslAturDualChanPerfDataEntry ::= SEQUENCE { sheAdslAturDualChanPerfDataReceivedBlks Counter32, sheAdslAturDualChanPerfDataTransmittedBlks Counter32, sheAdslAturDualChanPerfDataCorrectedBlks Counter32, sheAdslAturDualChanPerfDataUncorrectBlks Counter32, sheAdslAturDualChanPerfDataExtnNcd Gauge32, sheAdslAturDualChanPerfDataExtnHec Gauge32, sheAdslAturDualChanPerfDataPerfValidIntervals INTEGER, sheAdslAturDualChanPerfDataPerfInvalidIntervals INTEGER, sheAdslAturDualChanPerfDataCurr15MinTimeElapsed AdslPerfTimeElapsed, sheAdslAturDualChanPerfDataCurr15MinReceivedBlks PerfCurrentCount, sheAdslAturDualChanPerfDataCurr15MinTransmittedBlks PerfCurrentCount, sheAdslAturDualChanPerfDataCurr15MinCorrectedBlks PerfCurrentCount, sheAdslAturDualChanPerfDataCurr15MinUncorrectBlks PerfCurrentCount, sheAdslAturDualChanPerfDataExtnCurr15MinNcd Gauge32, sheAdslAturDualChanPerfDataExtnCurr15MinHec Gauge32, sheAdslAturDualChanPerfDataCurr1DayTimeElapsed AdslPerfTimeElapsed, sheAdslAturDualChanPerfDataCurr1DayReceivedBlks AdslPerfCurrDayCount, sheAdslAturDualChanPerfDataCurr1DayTransmittedBlks AdslPerfCurrDayCount, sheAdslAturDualChanPerfDataCurr1DayCorrectedBlks AdslPerfCurrDayCount, sheAdslAturDualChanPerfDataCurr1DayUncorrectBlks AdslPerfCurrDayCount, sheAdslAturDualChanPerfDataExtnCurr1DayNcd Gauge32, sheAdslAturDualChanPerfDataExtnCurr1DayHec Gauge32, sheAdslAturDualChanPerfDataPrev1DayMoniSecs INTEGER, sheAdslAturDualChanPerfDataPrev1DayReceivedBlks AdslPerfPrevDayCount, sheAdslAturDualChanPerfDataPrev1DayTransmittedBlks AdslPerfPrevDayCount, sheAdslAturDualChanPerfDataPrev1DayCorrectedBlks AdslPerfPrevDayCount, sheAdslAturDualChanPerfDataPrev1DayUncorrectBlks AdslPerfPrevDayCount, sheAdslAturDualChanPerfDataExtnPrev1DayNcd Gauge32, sheAdslAturDualChanPerfDataExtnPrev1DayHec Gauge32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.36.1.1 sheAdslAturDualChanPerfDataReceivedBlks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks received on this channel since agent reset." ::= { sheAdslAturDualChanPerfDataEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.36.1.2 sheAdslAturDualChanPerfDataTransmittedBlks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks transmitted on this channel since agent reset." ::= { sheAdslAturDualChanPerfDataEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.36.1.3 sheAdslAturDualChanPerfDataCorrectedBlks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with errors that were corrected since agent reset. These blocks are passed on as good data." ::= { sheAdslAturDualChanPerfDataEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.36.1.4 sheAdslAturDualChanPerfDataUncorrectBlks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with uncorrectable errors since agent reset." ::= { sheAdslAturDualChanPerfDataEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.36.1.5 sheAdslAturDualChanPerfDataExtnNcd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets with no cell delineation(NCD) error on this channel." ::= { sheAdslAturDualChanPerfDataEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.36.1.6 sheAdslAturDualChanPerfDataExtnHec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets with Header error check (HEC) error on this channel." ::= { sheAdslAturDualChanPerfDataEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.36.1.7 sheAdslAturDualChanPerfDataPerfValidIntervals OBJECT-TYPE SYNTAX INTEGER (0..96) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of previous 15-minute intervals in the interval table for which data was collected. Given that is the maximum # of intervals supported. The value will be unless the measurement was (re-)started within the last (*15) minutes, in which case the value will be the number of complete 15 minute intervals for which the agent has at least some data. In certain cases (e.g., in the case where the agent is a proxy) it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available." ::= { sheAdslAturDualChanPerfDataEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.36.1.8 sheAdslAturDualChanPerfDataPerfInvalidIntervals OBJECT-TYPE SYNTAX INTEGER (0..96) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of intervals in the range from 0 to the value of adslAturChanPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations)." ::= { sheAdslAturDualChanPerfDataEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.36.1.9 sheAdslAturDualChanPerfDataCurr15MinTimeElapsed OBJECT-TYPE SYNTAX AdslPerfTimeElapsed (0..899) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Total elapsed seconds in this interval. A full interval is 900 seconds." ::= { sheAdslAturDualChanPerfDataEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.36.1.10 sheAdslAturDualChanPerfDataCurr15MinReceivedBlks OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks received on this channel within the current 15 minute interval." ::= { sheAdslAturDualChanPerfDataEntry 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.36.1.11 sheAdslAturDualChanPerfDataCurr15MinTransmittedBlks OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks transmitted on this channel within the current 15 minute interval." ::= { sheAdslAturDualChanPerfDataEntry 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.36.1.12 sheAdslAturDualChanPerfDataCurr15MinCorrectedBlks OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with errors that were corrected on this channel within the current 15 minute interval." ::= { sheAdslAturDualChanPerfDataEntry 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.36.1.13 sheAdslAturDualChanPerfDataCurr15MinUncorrectBlks OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with uncorrectable errors on this channel within the current 15 minute interval." ::= { sheAdslAturDualChanPerfDataEntry 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.36.1.14 sheAdslAturDualChanPerfDataExtnCurr15MinNcd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets with no cell delineation(NCD) error on this channel within the current 15 minute time interval." ::= { sheAdslAturDualChanPerfDataEntry 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.36.1.15 sheAdslAturDualChanPerfDataExtnCurr15MinHec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets with Header error check (HEC) error on this channel within the current 15 minute time interval." ::= { sheAdslAturDualChanPerfDataEntry 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.36.1.16 sheAdslAturDualChanPerfDataCurr1DayTimeElapsed OBJECT-TYPE SYNTAX AdslPerfTimeElapsed (0..86399) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds that have elapsed since the beginning of the current 1-day interval." ::= { sheAdslAturDualChanPerfDataEntry 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.36.1.17 sheAdslAturDualChanPerfDataCurr1DayReceivedBlks OBJECT-TYPE SYNTAX AdslPerfCurrDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks received on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed." ::= { sheAdslAturDualChanPerfDataEntry 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.36.1.18 sheAdslAturDualChanPerfDataCurr1DayTransmittedBlks OBJECT-TYPE SYNTAX AdslPerfCurrDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks transmitted on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed." ::= { sheAdslAturDualChanPerfDataEntry 18 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.36.1.19 sheAdslAturDualChanPerfDataCurr1DayCorrectedBlks OBJECT-TYPE SYNTAX AdslPerfCurrDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with errors that were corrected on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed." ::= { sheAdslAturDualChanPerfDataEntry 19 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.36.1.20 sheAdslAturDualChanPerfDataCurr1DayUncorrectBlks OBJECT-TYPE SYNTAX AdslPerfCurrDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with uncorrectable errors on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed." ::= { sheAdslAturDualChanPerfDataEntry 20 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.36.1.21 sheAdslAturDualChanPerfDataExtnCurr1DayNcd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets with no cell delineation (NCD) error on this channel within the current 1 day time interval." ::= { sheAdslAturDualChanPerfDataEntry 21 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.36.1.22 sheAdslAturDualChanPerfDataExtnCurr1DayHec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets with Header error check (HEC) error on this channel within the current 1 day time interval." ::= { sheAdslAturDualChanPerfDataEntry 22 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.36.1.23 sheAdslAturDualChanPerfDataPrev1DayMoniSecs OBJECT-TYPE SYNTAX INTEGER (0..86400) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monitoring data could not be collected for any reason." ::= { sheAdslAturDualChanPerfDataEntry 23 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.36.1.24 sheAdslAturDualChanPerfDataPrev1DayReceivedBlks OBJECT-TYPE SYNTAX AdslPerfPrevDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks received on this channel within the most recent previous 1-day period." ::= { sheAdslAturDualChanPerfDataEntry 24 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.36.1.25 sheAdslAturDualChanPerfDataPrev1DayTransmittedBlks OBJECT-TYPE SYNTAX AdslPerfPrevDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks transmitted on this channel within the most recent previous 1-day period." ::= { sheAdslAturDualChanPerfDataEntry 25 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.36.1.26 sheAdslAturDualChanPerfDataPrev1DayCorrectedBlks OBJECT-TYPE SYNTAX AdslPerfPrevDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with errors that were corrected on this channel within the most recent previous 1-day period." ::= { sheAdslAturDualChanPerfDataEntry 26 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.36.1.27 sheAdslAturDualChanPerfDataPrev1DayUncorrectBlks OBJECT-TYPE SYNTAX AdslPerfPrevDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with uncorrectable errors on this channel within the most recent previous 1-day period." ::= { sheAdslAturDualChanPerfDataEntry 27 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.36.1.28 sheAdslAturDualChanPerfDataExtnPrev1DayNcd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets with no cell delineation (NCD) error on this channel within the most recent previous period." ::= { sheAdslAturDualChanPerfDataEntry 28 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.36.1.29 sheAdslAturDualChanPerfDataExtnPrev1DayHec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets with Header error check (HEC) error on this channel within the most recent previous period." ::= { sheAdslAturDualChanPerfDataEntry 29 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.37 sheAdslAtucDualChanIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF SheAdslAtucDualChanIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides one row for each ATUC channel's performance data collection interval. Only supported by NE R2.5 and higher." ::= { sheAdslLineMIB 37 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.37.1 sheAdslAtucDualChanIntervalEntry OBJECT-TYPE SYNTAX SheAdslAtucDualChanIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the adslAtucIntervalTable. New table only supported by NE releases up R2.5. Indexed by ifIndex - ChanType - IntervalNumber." INDEX { ifIndex, sheAdslAtucDualChanType, sheAdslAtucChanIntervalNumber } ::= { sheAdslAtucDualChanIntervalTable 1 } SheAdslAtucDualChanIntervalEntry ::= SEQUENCE { sheAdslAtucDualChanIntervalNumber INTEGER, sheAdslAtucDualChanIntervalValidData TruthValue, sheAdslAtucDualChanIntervalEndTime Unsigned32, sheAdslAtucDualChanIntervalReceivedBlks PerfIntervalCount, sheAdslAtucDualChanIntervalTransmittedBlks PerfIntervalCount, sheAdslAtucDualChanIntervalCorrectedBlks PerfIntervalCount, sheAdslAtucDualChanIntervalUncorrectBlks PerfIntervalCount, sheAdslAtucDualChanIntervalNcd Counter32, sheAdslAtucDualChanIntervalOcd Counter32, sheAdslAtucDualChanIntervalHec Counter32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.37.1.1 sheAdslAtucDualChanIntervalNumber OBJECT-TYPE SYNTAX INTEGER (1..96) MAX-ACCESS read-only STATUS current DESCRIPTION "Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional." ::= { sheAdslAtucDualChanIntervalEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.37.1.2 sheAdslAtucDualChanIntervalValidData OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates if the data for this interval is valid." ::= { sheAdslAtucDualChanIntervalEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.37.1.3 sheAdslAtucDualChanIntervalEndTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the time of storing this interval." ::= { sheAdslAtucDualChanIntervalEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.37.1.4 sheAdslAtucDualChanIntervalReceivedBlks OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks received on this channel during this interval." ::= { sheAdslAtucDualChanIntervalEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.37.1.5 sheAdslAtucDualChanIntervalTransmittedBlks OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks transmitted on this channel during this interval." ::= { sheAdslAtucDualChanIntervalEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.37.1.6 sheAdslAtucDualChanIntervalCorrectedBlks OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with errors that were corrected on this channel during this interval." ::= { sheAdslAtucDualChanIntervalEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.37.1.7 sheAdslAtucDualChanIntervalUncorrectBlks OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with uncorrectable errors on this channel during this interval." ::= { sheAdslAtucDualChanIntervalEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.37.1.8 sheAdslAtucDualChanIntervalNcd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates count of no cell delineation on this channel for this interval." ::= { sheAdslAtucDualChanIntervalEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.37.1.9 sheAdslAtucDualChanIntervalOcd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates count of out cell delineation on this channel for this interval." ::= { sheAdslAtucDualChanIntervalEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.37.1.10 sheAdslAtucDualChanIntervalHec OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates Header error check counter on this channel during this interval." ::= { sheAdslAtucDualChanIntervalEntry 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.38 sheAdslAturDualChanIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF SheAdslAturDualChanIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides one row for each ATUR channel's performance data collection interval. Only supported by NE R2.5 and higher. " ::= { sheAdslLineMIB 38 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.38.1 sheAdslAturDualChanIntervalEntry OBJECT-TYPE SYNTAX SheAdslAturDualChanIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the adslAturIntervalTable. New table only supported by NE releases up R2.5. Indexed by ifIndex - ChanType - IntervalNumber." INDEX { ifIndex, sheAdslAturDualChanType, sheAdslAturChanIntervalNumber } ::= { sheAdslAturDualChanIntervalTable 1 } SheAdslAturDualChanIntervalEntry ::= SEQUENCE { sheAdslAturDualChanIntervalNumber INTEGER, sheAdslAturDualChanIntervalValidData TruthValue, sheAdslAturDualChanIntervalEndTime Unsigned32, sheAdslAturDualChanIntervalReceivedBlks PerfIntervalCount, sheAdslAturDualChanIntervalTransmittedBlks PerfIntervalCount, sheAdslAturDualChanIntervalCorrectedBlks PerfIntervalCount, sheAdslAturDualChanIntervalUncorrectBlks PerfIntervalCount, sheAdslAturDualChanIntervalNcd Gauge32, sheAdslAturDualChanIntervalHec Gauge32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.38.1.1 sheAdslAturDualChanIntervalNumber OBJECT-TYPE SYNTAX INTEGER (1..96) MAX-ACCESS read-only STATUS current DESCRIPTION "Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional." ::= { sheAdslAturDualChanIntervalEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.38.1.2 sheAdslAturDualChanIntervalValidData OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates if the data for this interval is valid." ::= { sheAdslAturDualChanIntervalEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.38.1.3 sheAdslAturDualChanIntervalEndTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the time of storing this interval." ::= { sheAdslAturDualChanIntervalEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.38.1.4 sheAdslAturDualChanIntervalReceivedBlks OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks received on this channel during this interval." ::= { sheAdslAturDualChanIntervalEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.38.1.5 sheAdslAturDualChanIntervalTransmittedBlks OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks transmitted on this channel during this interval." ::= { sheAdslAturDualChanIntervalEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.38.1.6 sheAdslAturDualChanIntervalCorrectedBlks OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with errors that were corrected on this channel during this interval." ::= { sheAdslAturDualChanIntervalEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.38.1.7 sheAdslAturDualChanIntervalUncorrectBlks OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with uncorrectable errors on this channel during this interval." ::= { sheAdslAturDualChanIntervalEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.38.1.8 sheAdslAturDualChanIntervalNcd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates count of no cell delineation on this channel for this interval." ::= { sheAdslAturDualChanIntervalEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.38.1.9 sheAdslAturDualChanIntervalHec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates Header error check counter on this channel during this interval." ::= { sheAdslAturDualChanIntervalEntry 9 } -- DPBO Profile configuration according g997.1 chapter 7.3.1.2.13 -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.39 sheAdslLineDpboProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF SheAdslLineDpboProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Dpbo Profile Table. Support with SHE R2.6 RP2." ::= { sheAdslLineMIB 39 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.39.1 sheAdslLineDpboProfileEntry OBJECT-TYPE SYNTAX SheAdslLineDpboProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains DPBO profile configuration. For more details, refer ITU-T G.997.1 chapter 7.3.1.2.13." INDEX { sheAdslLineDpboProfileIndex } ::= { sheAdslLineDpboProfileTable 1 } SheAdslLineDpboProfileEntry ::= SEQUENCE { sheAdslLineDpboProfileIndex Integer32, sheAdslLineDpboProfileName OCTET STRING, sheAdslLineDpboProfileEsel Unsigned32, sheAdslLineDpboProfileEselMin Unsigned32, sheAdslLineDpboProfileMus Unsigned32, sheAdslLineDpboProfileMof Unsigned32, sheAdslLineDpboProfileFMin Unsigned32, sheAdslLineDpboProfileFMax Unsigned32, sheAdslLineDpboProfileEpsd OCTET STRING, sheAdslLineDpboProfileEScmA Unsigned32, sheAdslLineDpboProfileEScmB Unsigned32, sheAdslLineDpboProfileEScmC Unsigned32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.39.1.1 sheAdslLineDpboProfileIndex OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Table Index, automatically generated when the table entry is created." ::= { sheAdslLineDpboProfileEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.39.1.2 sheAdslLineDpboProfileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used by the line configuration table in order to identify a row of this table for Dpbo profile assign. Special characters are not allowed, like: space : ?" ::= { sheAdslLineDpboProfileEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.39.1.3 sheAdslLineDpboProfileEsel OBJECT-TYPE SYNTAX Unsigned32 (0..511) UNITS "0.5dB" MAX-ACCESS read-only STATUS current DESCRIPTION "This configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility point (cabinet), that may also host remotely located DSL that is subject to spectrally shaped downstream power backoff depending on this length. For this parameter the electrical length is defined as the loss (in dB) of an equivalent length of hypothetical cable at a reference frequency defined by the network operator or in spectrum management regulations. All values which can be represented by the format are valid values. If this value is zero, the DPBO in this section shall be disabled. If this value is not zero and sheAdslLineDpboProfileEselMin is not 512 (disabled EselMin), sheAdslLineDpboProfileEsel >= sheAdslLineDpboProfileEselMin is required! " REFERENCE "g.997 chapter 7.3.1.2.13" DEFVAL { 0 } ::= { sheAdslLineDpboProfileEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.39.1.4 sheAdslLineDpboProfileEselMin OBJECT-TYPE SYNTAX Unsigned32 (0..512) UNITS "0.5dB" MAX-ACCESS read-only STATUS current DESCRIPTION "This configuration parameter defines the minimum assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility point (cabinet), that may also host remotely located DSL that is subject to spectrally shaped downstream power backoff depending on this length. For this parameter the electrical length is defined as the loss (in dB) of an equivalent length of hypothetical cable at a reference frequency defined by the network operator or in spectrum management regulations. All values which can be represented by the format are valid values. Default: sheAdslLineDpboProfileEselMin = 512 If this value is not 512 (disabled) and sheAdslLineDpboProfileEsel is not zero (DPBO disabled), sheAdslLineDpboProfileEsel >= sheAdslLineDpboProfileEselMin is required! " REFERENCE "g.997 chapter 7.3.1.2.13" DEFVAL { 512 } ::= { sheAdslLineDpboProfileEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.39.1.5 sheAdslLineDpboProfileMus OBJECT-TYPE SYNTAX Unsigned32 (0..255) UNITS "0.5 dBm/Hz" MAX-ACCESS read-only STATUS current DESCRIPTION "DPBOMUS defines the assumed Minimum Usable receive Signal PSD (in dBm/Hz) for exchange based services, used to modify parameter DPBOFMAX defined below. All values which can be represented by the format are valid values: 0 = 0 dBm/Hz .. -127.5 dBm/Hz (coded as 255)." REFERENCE "g.997 chapter 7.3.1.2.13" DEFVAL { 216 } ::= { sheAdslLineDpboProfileEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.39.1.6 sheAdslLineDpboProfileMof OBJECT-TYPE SYNTAX Unsigned32 (0..255) UNITS "0.5 dBm/Hz" MAX-ACCESS read-only STATUS current DESCRIPTION "DPBOMOF (mask overall floor) defines the absolut minimum of the used PSD mask (in dBm/Hz) for exchange based services. All values which can be represented by the format are valid values: 0 = 0 dBm/Hz .. -127.5 dBm/Hz (coded as 255). Note: Not longer supported!" REFERENCE "g.997 chapter 7.3.1.2.13" DEFVAL { 190 } ::= { sheAdslLineDpboProfileEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.39.1.7 sheAdslLineDpboProfileFMin OBJECT-TYPE SYNTAX Unsigned32 (1..512) MAX-ACCESS read-only STATUS current DESCRIPTION "DPBO shall be applied in the range starting at DPBOFMIN and should be configured as an subcarrier index. The range of valid values is from 1 to 512." REFERENCE "g.997 chapter 7.3.1.2.13" DEFVAL { 64 } ::= { sheAdslLineDpboProfileEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.39.1.8 sheAdslLineDpboProfileFMax OBJECT-TYPE SYNTAX Unsigned32 (1..512) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum subcarrier at which DPBO may be applied is DPBOFMAX. The range of valid values is from 1 to 512." REFERENCE "g.997 chapter 7.3.1.2.13" DEFVAL { 512 } ::= { sheAdslLineDpboProfileEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.39.1.9 sheAdslLineDpboProfileEpsd OBJECT-TYPE SYNTAX OCTET STRING (SIZE (64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Used PSD mask that is assumed to be permitted at the exchange. The set of breakpoints can be represented as [(t1, PSD1),(t2, PSD2), .. , (tN, PSDN)]. The subcarrier index (tN) shall be coded as an unsigned integer (16 bit, range 1..512). The MIB PSD mask level (PSDN) shall be coded as an unsigned integer (16 bit) representing the MIB PSD mask levels 0 dBm/Hz (coded as 0) to -127.5 dBm/Hz (coded as 255), in steps of 0.5 dBm/Hz. The maximum number of breakpoints for DPBOEPSD is 16. If less then maximum breakpoints will be defined, all used breakpoints should be configured in a consecutive way without spaces (t1 - t2 - t3.. and not t1 - t5 - t7..). The default value should be set according PSD settings for ADSL2+. Subcarrier PSD 59 -36.5 256 -36.5 314 -42 376 -46.5 499 -47.5 " REFERENCE "g.997 chapter 7.3.1.2.13" DEFVAL { '003B004901000049013A00540178005D01F3005F'h } ::= { sheAdslLineDpboProfileEntry 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.39.1.10 sheAdslLineDpboProfileEScmA OBJECT-TYPE SYNTAX Unsigned32 (0..640) UNITS "2^-8" MAX-ACCESS read-only STATUS current DESCRIPTION "This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that are used to estimate the frequency dependent loss of E-side cables calculated from the DPBOESEL parameter using the formula: ESCM(f) = (DPBOESCMA + DPBOESCMB*sqrt(f) + DPBOESCMC*f )*DPBOESCL Where ESCM is expressed in dB and f is expressed in MHz. DPBOESCMA, DPBOESCMB, DPBOESCMC shall be coded as unsigned integers representing a scalar value from -1 (coded as 0) to 1.5 (coded as 640) in step of 2^-8. All values are valid." REFERENCE "g.997 chapter 7.3.1.2.13" DEFVAL { 270 } ::= { sheAdslLineDpboProfileEntry 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.39.1.11 sheAdslLineDpboProfileEScmB OBJECT-TYPE SYNTAX Unsigned32 (0..640) UNITS "2^-8" MAX-ACCESS read-only STATUS current DESCRIPTION "This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that are used to estimate the frequency dependent loss of E-side cables calculated from the DPBOESEL parameter using the formula: ESCM(f) = (DPBOESCMA + DPBOESCMB*sqrt(f) + DPBOESCMC*f )*DPBOESCL Where ESCM is expressed in dB and f is expressed in MHz. DPBOESCMA, DPBOESCMB, DPBOESCMC shall be coded as unsigned integers representing a scalar value from -1 (coded as 0) to 1.5 (coded as 640) in step of 2^-8. All values are valid." REFERENCE "g.997 chapter 7.3.1.2.13" DEFVAL { 490 } ::= { sheAdslLineDpboProfileEntry 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.39.1.12 sheAdslLineDpboProfileEScmC OBJECT-TYPE SYNTAX Unsigned32 (0..640) UNITS "2^-8" MAX-ACCESS read-only STATUS current DESCRIPTION "This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that are used to estimate the frequency dependent loss of E-side cables calculated from the DPBOESEL parameter using the formula: ESCM(f) = (DPBOESCMA + DPBOESCMB*sqrt(f) + DPBOESCMC*f )*DPBOESCL Where ESCM is expressed in dB and f is expressed in MHz. DPBOESCMA, DPBOESCMB, DPBOESCMC shall be coded as unsigned integers representing a scalar value from -1 (coded as 0) to 1.5 (coded as 640) in step of 2^-8. All values are valid." REFERENCE "g.997 chapter 7.3.1.2.13" DEFVAL { 264 } ::= { sheAdslLineDpboProfileEntry 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.30 -- Support with SHE R2.6 RP2. sheAdslLineDpboProfileControl OBJECT IDENTIFIER ::= { sheAdslLineMIB 40 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.40.1 sheAdslLineDpboProfileControlRequest OBJECT-TYPE SYNTAX SheAdslControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "createAdslLineDpboProfile: sheAdslLineDpboProfileControlName sheAdslLineDpboProfileControlEsel sheAdslLineDpboProfileControlEselMin sheAdslLineDpboProfileControlMus sheAdslLineDpboProfileControlMof sheAdslLineDpboProfileControlFMin sheAdslLineDpboProfileControlFMax sheAdslLineDpboProfileControlEpsd sheAdslLineDpboProfileControlEScmA sheAdslLineDpboProfileControlEScmB sheAdslLineDpboProfileControlEScmC modifyAdslLineDpboProfile: sheAdslLineDpboProfileControlIndex sheAdslLineDpboProfileControlEsel sheAdslLineDpboProfileControlEselMin sheAdslLineDpboProfileControlMus sheAdslLineDpboProfileControlMof sheAdslLineDpboProfileControlFMin sheAdslLineDpboProfileControlFMax sheAdslLineDpboProfileControlEpsd sheAdslLineDpboProfileControlEScmA sheAdslLineDpboProfileControlEScmB sheAdslLineDpboProfileControlEScmC deleteAdslLineDpboProfile sheAdslLineDpboProfileControlIndex" ::= { sheAdslLineDpboProfileControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.40.2 sheAdslLineDpboProfileControlIndex OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Index of the Table-entry to be configured." ::= { sheAdslLineDpboProfileControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.40.3 sheAdslLineDpboProfileControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command. " ::= { sheAdslLineDpboProfileControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.40.4 sheAdslLineDpboProfileControlTimer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command. " ::= { sheAdslLineDpboProfileControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.40.5 sheAdslLineDpboProfileControlReqResult OBJECT-TYPE SYNTAX SheAdslControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheAdslLineDpboProfileControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.40.6 sheAdslLineDpboProfileControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheAdslLineDpboProfileControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.40.7 sheAdslLineDpboProfileControlName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "A descriptional name for the Dpbo profile." ::= { sheAdslLineDpboProfileControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.40.8 sheAdslLineDpboProfileControlEsel OBJECT-TYPE SYNTAX Unsigned32 (0..511) UNITS "0.5dB" MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheAdslLineDpboProfileControl 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.40.9 sheAdslLineDpboProfileControlEselMin OBJECT-TYPE SYNTAX Unsigned32 (0..512) UNITS "0.5dB" MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheAdslLineDpboProfileControl 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.40.10 sheAdslLineDpboProfileControlMus OBJECT-TYPE SYNTAX Unsigned32 (0..255) UNITS "0.5 dBm/Hz" MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheAdslLineDpboProfileControl 10 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.40.11 sheAdslLineDpboProfileControlMof OBJECT-TYPE SYNTAX Unsigned32 (0..255) UNITS "0.5 dBm/Hz" MAX-ACCESS read-write STATUS current DESCRIPTION "look at table Note: Not longer supported!" ::= { sheAdslLineDpboProfileControl 11 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.40.12 sheAdslLineDpboProfileControlFMin OBJECT-TYPE SYNTAX Unsigned32 (1..512) MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheAdslLineDpboProfileControl 12 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.40.13 sheAdslLineDpboProfileControlFMax OBJECT-TYPE SYNTAX Unsigned32 (1..512) MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheAdslLineDpboProfileControl 13 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.40.14 sheAdslLineDpboProfileControlEpsd OBJECT-TYPE SYNTAX OCTET STRING (SIZE (64)) MAX-ACCESS read-write STATUS current DESCRIPTION "look at table." ::= { sheAdslLineDpboProfileControl 14 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.40.15 sheAdslLineDpboProfileControlEScmA OBJECT-TYPE SYNTAX Unsigned32 (0..640) UNITS "2^-8" MAX-ACCESS read-write STATUS current DESCRIPTION "look at table." ::= { sheAdslLineDpboProfileControl 15 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.40.16 sheAdslLineDpboProfileControlEScmB OBJECT-TYPE SYNTAX Unsigned32 (0..640) UNITS "2^-8" MAX-ACCESS read-write STATUS current DESCRIPTION "look at table." ::= { sheAdslLineDpboProfileControl 16 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.40.17 sheAdslLineDpboProfileControlEScmC OBJECT-TYPE SYNTAX Unsigned32 (0..640) UNITS "2^-8" MAX-ACCESS read-write STATUS current DESCRIPTION "look at table." ::= { sheAdslLineDpboProfileControl 17 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.39 sheAdslVccTpPerformanceTable OBJECT-TYPE SYNTAX SEQUENCE OF SheAdslVccTpPerformanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VccTpPerformance-Table." ::= { sheAdslLineMIB 41 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.25.1 sheAdslVccTpPerformanceEntry OBJECT-TYPE SYNTAX SheAdslVccTpPerformanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the VccTpPerformance-Counters. These are free running counters. The counters could be deleted with command deleteAdslVccTpPerformanceCounters via sheAdslVccTpControl-Group. " INDEX { sheAdslVccTpIndex } ::= { sheAdslVccTpPerformanceTable 1 } SheAdslVccTpPerformanceEntry ::= SEQUENCE { sheAdslVccTpIngressUnicastPackets Counter32, sheAdslVccTpIngressMulticastPackets Counter32, sheAdslVccTpIngressBroadcastPackets Counter32, sheAdslVccTpIngressDiscardPackets Counter32, sheAdslVccTpEgressUnicastPackets Counter32, sheAdslVccTpEgressMulticastPackets Counter32, sheAdslVccTpEgressBroadcastPackets Counter32, sheAdslVccTpEgressDiscardPackets Counter32 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.39.1.1 sheAdslVccTpIngressUnicastPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ingress Unicast Packet Counter for this VccTp." ::= { sheAdslVccTpPerformanceEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.39.1.1 sheAdslVccTpIngressMulticastPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ingress Multicast Packet Counter for this VccTp." ::= { sheAdslVccTpPerformanceEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.39.1.1 sheAdslVccTpIngressBroadcastPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ingress Broadcast Packet Counter for this VccTp." ::= { sheAdslVccTpPerformanceEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.39.1.1 sheAdslVccTpIngressDiscardPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ingress Discard Packet Counter for this VccTp." ::= { sheAdslVccTpPerformanceEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.39.1.1 sheAdslVccTpEgressUnicastPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Egress Unicast Packet Counter for this VccTp." ::= { sheAdslVccTpPerformanceEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.39.1.1 sheAdslVccTpEgressMulticastPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Egress Multicast Packet Counter for this VccTp." ::= { sheAdslVccTpPerformanceEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.39.1.1 sheAdslVccTpEgressBroadcastPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Egress Broadcast Packet Counter for this VccTp." ::= { sheAdslVccTpPerformanceEntry 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.39.1.1 sheAdslVccTpEgressDiscardPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Egress Discard Packet Counter for this VccTp." ::= { sheAdslVccTpPerformanceEntry 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.100 sheAdslConformance OBJECT IDENTIFIER ::= { sheAdslLineMIB 100 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.100.1 sheAdslCompliances OBJECT IDENTIFIER ::= { sheAdslConformance 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.100.1.1 -- sheAdslCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Description." MODULE -- this module MANDATORY-GROUPS { sheAdslVccTpGroup, sheAdslVccTpControlGroup, sheAdslVccTpNotificationGroup, sheAdslGroup, sheAdslControlGroup, sheAdslNotificationGroup } GROUP sheAdslDualChanGroup DESCRIPTION "Only supported by NE releases up R2.5." GROUP sheAdslObsoleteGroup DESCRIPTION "THIS ELEMENTS WILL NOT LONGER BE SUPPORTED BY NE up R2.5." GROUP sheAdslObsoleteNotificationGroup DESCRIPTION "THIS ELEMENTS WILL NOT LONGER BE SUPPORTED BY NE up R2.5." ::= { sheAdslCompliances 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.100.2 sheAdslGroups OBJECT IDENTIFIER ::= { sheAdslConformance 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.100.2.1 sheAdslVccTpGroup OBJECT-GROUP OBJECTS { sheAdslVccTpVpi, sheAdslVccTpVci, sheAdslVccTpOamLevel, sheAdslVccTpAlarmSeverityIndex, sheAdslVccTpLoopTestResult, sheAdslVccTpNumber, sheAdslVccTpSubLayerIndex, sheAdslVccTpIndex, sheAdslVccTpEgressQosClass, sheAdslVccTpEgressPeakCellRate, sheAdslVccTpEgressSustainedCellRate, sheAdslVccTpEgressMaxBurstSize, sheAdslVccTpEgressWeight, sheAdslVccTpIngressSustainedCellRate, sheAdslVccTpIngressMaxBurstSize, sheAdslVccTpUsedDslChannel, sheAdslVccTpIngressUnicastPackets, sheAdslVccTpIngressMulticastPackets, sheAdslVccTpIngressBroadcastPackets, sheAdslVccTpIngressDiscardPackets, sheAdslVccTpEgressUnicastPackets, sheAdslVccTpEgressMulticastPackets, sheAdslVccTpEgressBroadcastPackets, sheAdslVccTpEgressDiscardPackets, sheAdslVccTpEncapsulation, sheAdslVccTpLoopLocId, sheAdslVccTpLoopTest, sheAdslVccTpAdminState, sheAdslVccTpOrl } STATUS current DESCRIPTION "Description." ::= { sheAdslGroups 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.100.2.2 sheAdslVccTpControlGroup OBJECT-GROUP OBJECTS { sheAdslVccTpControlRequest, sheAdslVccTpControlIndex, sheAdslVccTpControlStatus, sheAdslVccTpControlTimer, sheAdslVccTpControlReqResult, sheAdslVccTpControlTimeStamp, sheAdslVccTpControlVpi, sheAdslVccTpControlVci, sheAdslVccTpControlEgressQosClass, sheAdslVccTpControlEgressPeakCellRate, sheAdslVccTpControlEgressSustainedCellRate, sheAdslVccTpControlEgressMaxBurstSize, sheAdslVccTpControlEgressWeight, sheAdslVccTpControlIngressSustainedCellRate, sheAdslVccTpControlIngressMaxBurstSize, sheAdslVccTpControlUsedDslChannel, sheAdslVccTpControlEncapsulation, sheAdslVccTpControlLoopTest, sheAdslVccTpControlSubLayerIndex, sheAdslVccTpControlAlarmSeverityIndex, sheAdslVccTpControlAdminState, sheAdslVccTpControlOrl } STATUS current DESCRIPTION "Description." ::= { sheAdslGroups 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.100.2.3 sheAdslVccTpNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { sheAdslVccTpCreated, sheAdslVccRDIAlarm, sheAdslVccAISAlarm, sheAdslVccTpConfigurationFailed, sheAdslVccTpAdminStateChanged, sheAdslVccTpOrlChanged, sheAdslVccTpChangedEgressShaping, sheAdslVccTpChangedIngressPolicing, sheAdslVccTpUsedDslChannelChanged, sheAdslVccTpPerformanceCountersCleared, sheAdslVccTpDeleted, sheAdslVccTpModified, sheAdslVccTpEncapsulationChanged } STATUS current DESCRIPTION "Description." ::= { sheAdslGroups 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.100.2.4 sheAdslGroup OBJECT-GROUP OBJECTS { sheAdslLineConfProfileIndex, sheAdslLineConfProfileName, sheAdslLineConfProfileAtucConfRateMode, sheAdslLineConfProfileAtucConfRateChanRatio, sheAdslLineConfProfileAtucConfTargetSnrMgn, sheAdslLineConfProfileAtucConfMaxSnrMgn, sheAdslLineConfProfileAtucConfMinSnrMgn, sheAdslLineConfProfileAtucConfDownshiftSnrMgn, sheAdslLineConfProfileAtucConfUpshiftSnrMgn, sheAdslLineConfProfileAtucConfMinUpshiftTime, sheAdslLineConfProfileAtucConfMinDownshiftTime, sheAdslLineConfProfileAtucChanConfFastMinTxRate, sheAdslLineConfProfileAtucChanConfInterleaveMinTxRate, sheAdslLineConfProfileAtucChanConfFastMaxTxRate, sheAdslLineConfProfileAtucChanConfInterleaveMaxTxRate, sheAdslLineConfProfileAtucChanConfMaxInterleaveDelay, sheAdslLineConfProfileAturConfRateMode, sheAdslLineConfProfileAturConfRateChanRatio, sheAdslLineConfProfileAturConfTargetSnrMgn, sheAdslLineConfProfileAturConfMaxSnrMgn, sheAdslLineConfProfileAturConfMinSnrMgn, sheAdslLineConfProfileAturConfDownshiftSnrMgn, sheAdslLineConfProfileAturConfUpshiftSnrMgn, sheAdslLineConfProfileAturConfMinUpshiftTime, sheAdslLineConfProfileAturConfMinDownshiftTime, sheAdslLineConfProfileAturChanConfFastMinTxRate, sheAdslLineConfProfileAturChanConfInterleaveMinTxRate, sheAdslLineConfProfileAturChanConfFastMaxTxRate, sheAdslLineConfProfileAturChanConfInterleaveMaxTxRate, sheAdslLineConfProfileAturChanConfMaxInterleaveDelay, sheAdslLineConfProfileTrellis, sheAdslLineConfProfileAtucConfPwrMgmtL0Time, sheAdslLineConfProfileAtucConfPwrMgmtL2Time, sheAdslLineConfProfileAtucConfPwrMgmtL2ATPR, sheAdslLineConfProfileAtucConfPwrMgmtL2Rate, sheAdslLineConfProfileAtucConfPwrMgmtMode, sheAdslLineConfExtnProfileParametricTestInputFile, sheAdslLineConfExtnProfileRsIntCorrectionUp, sheAdslLineConfExtnProfileLineType, sheAdslLineConfExtnProfileTxEndBin, sheAdslLineConfExtnProfileTxStartBin, sheAdslLineConfExtnProfileMaxBitsPerBin, sheAdslLineConfExtnProfileRxStartBin, sheAdslLineConfExtnProfileRxEndBin, sheAdslLineConfExtnProfileRxBinAdjust, sheAdslLineConfExtnProfileTriggerMode, sheAdslLineConfExtnProfileAdi2x, sheAdslLineConfExtnProfileStandard, sheAdslLineConfExtnProfileInitiate, sheAdslLineConfExtnProfileTxPowerAttenuation, sheAdslLineConfExtnProfileCodingGain, sheAdslLineConfExtnProfileRsFastOvrhdDown, sheAdslLineConfExtnProfileIntCorrectionDown, sheAdslLineConfExtnProfileRsFastOvrhdUp, sheAdslLineConfExtnProfileDrStby, sheAdslLineConfExtnProfileExpandedExchange, sheAdslLineConfExtnProfileEscapeFastRetrainEnable, sheAdslLineConfExtnProfileFastRetrainEnable, sheAdslLineConfExtnProfileBitSwap, sheAdslLineConfExtnProfileNtr, sheAdslLineConfExtnProfileAnnexType, sheAdslLineConfExtnProfileAlctlUsVer, sheAdslLineConfExtnProfileUseCustomBin, sheAdslLineConfExtnProfileDnBinUsage, sheAdslLineConfExtnProfileMaxDCo, sheAdslLineConfExtnProfileFullRetrain, sheAdslLineConfExtnProfileAdvertisedCapabilities, sheAdslLineConfExtnProfilePsdMaskType, sheAdslLineConfExtnProfileLineDmtConfMode, sheAdslLineConfExtnProfileEraseProfiles, sheAdslLineConfExtnProfileRsMemory, sheAdslLineConfExtnProfileParamHybridLossTestStart, sheAdslLineConfExtnProfileParamHybridLossTestEnd, sheAdslLineConfExtnProfileConfMinInp, sheAdslLineConfExtnProfileUpstreamPsdMaskSelection, sheAdslLineConfExtnProfileMaxNomPsdDs, sheAdslLineConfExtnProfileMaxNomAtpDs, sheAdslLineConfExtnProfilePsdMaskDs, sheAdslLineCoding, sheAdslLineType, sheAdslLineSpecific, sheAdslLineConfProfile, sheAdslLineAlarmConfProfile, sheAdslLineAction, sheAdslLineLineDmtTrellis, sheAdslLineAtucCapability, sheAdslLineAturCapability, sheAdslLineAtuActualCapability, sheAdslLinePwrMgmtPMSF, sheAdslLineDeltConfLDSF, sheAdslLineRfiBandMask, sheAdslAtucPhysInvSerialNumber, sheAdslAtucPhysInvVendorID, sheAdslAtucPhysInvVersionNumber, sheAdslAtucPhysCurrSnrMgn, sheAdslAtucPhysCurrAtn, sheAdslAtucPhysCurrStatus, sheAdslAtucPhysCurrOutputPwr, sheAdslAtucPhysCurrAttainableRate, sheAdslAtucPhysOpState, sheAdslAtucPhysActualStd, sheAdslAtucPhysBertError, sheAdslAtucPhysTxAtmCellCounter, sheAdslAtucPhysRxAtmCellCounter, sheAdslAtucPhysStartProgress, sheAdslAtucPhysIdleBertError, sheAdslAtucPhysIdleBertCells, sheAdslAtucPhysBertSync, sheAdslAtucPhysParametricTestResult, sheAdslAtucPwrMgmtState, sheAdslAtucPhysDeltHLINSCus, sheAdslAtucPhysDeltHLINpsus, sheAdslAtucPhysDeltHLOGMTus, sheAdslAtucPhysDeltHLOGpsus, sheAdslAtucPhysDeltQLNMTus, sheAdslAtucPhysDeltQLNpsus, sheAdslAtucChanInterleaveDelay, sheAdslAtucChanCurrTxRate, sheAdslAtucChanPrevTxRate, sheAdslAtucChanCrcBlockLength, sheAdslAtucChanCurrAtmStatus, sheAdslAtucChanRsSymbols, sheAdslAtucChanRsDepth, sheAdslAtucChanRsRedundancy, sheAdslAtucPerfDataLofs, sheAdslAtucPerfDataLoss, sheAdslAtucPerfDataLols, sheAdslAtucPerfDataLprs, sheAdslAtucPerfDataESs, sheAdslAtucPerfDataInits, sheAdslAtucPerfDataStatFastR, sheAdslAtucPerfDataStatFailedFastR, sheAdslAtucPerfDataStatSesL, sheAdslAtucPerfDataStatUasL, sheAdslAtucPerfDataValidIntervals, sheAdslAtucPerfDataInvalidIntervals, sheAdslAtucPerfDataCurr15MinTimeElapsed, sheAdslAtucPerfDataCurr15MinLofs, sheAdslAtucPerfDataCurr15MinLoss, sheAdslAtucPerfDataCurr15MinLols, sheAdslAtucPerfDataCurr15MinLprs, sheAdslAtucPerfDataCurr15MinESs, sheAdslAtucPerfDataCurr15MinInits, sheAdslAtucPerfDataCurr15MinFastR, sheAdslAtucPerfDataCurr15MinFailedFastR, sheAdslAtucPerfDataCurr15MinSesL, sheAdslAtucPerfDataCurr15MinUasL, sheAdslAtucPerfDataCurr1DayTimeElapsed, sheAdslAtucPerfDataCurr1DayLofs, sheAdslAtucPerfDataCurr1DayLoss, sheAdslAtucPerfDataCurr1DayLols, sheAdslAtucPerfDataCurr1DayLprs, sheAdslAtucPerfDataCurr1DayESs, sheAdslAtucPerfDataCurr1DayInits, sheAdslAtucPerfDataCurr1DayFastR, sheAdslAtucPerfDataCurr1DayFailedFastR, sheAdslAtucPerfDataCurr1DaySesL, sheAdslAtucPerfDataCurr1DayUasL, sheAdslAtucPerfDataPrev1DayTimeElapsed, sheAdslAtucPerfDataPrev1DayMoniSecs, sheAdslAtucPerfDataPrev1DayLofs, sheAdslAtucPerfDataPrev1DayLoss, sheAdslAtucPerfDataPrev1DayLols, sheAdslAtucPerfDataPrev1DayLprs, sheAdslAtucPerfDataPrev1DayESs, sheAdslAtucPerfDataPrev1DayInits, sheAdslAtucPerfDataPrev1DayFastR, sheAdslAtucPerfDataPrev1DayFailedFastR, sheAdslAtucPerfDataPrev1DaySesL, sheAdslAtucPerfDataPrev1DayUasL, sheAdslAtucIntervalNumber, sheAdslAtucIntervalValidData, sheAdslAtucIntervalEndTime, sheAdslAtucIntervalLofs, sheAdslAtucIntervalLoss, sheAdslAtucIntervalLols, sheAdslAtucIntervalLprs, sheAdslAtucIntervalESs, sheAdslAtucIntervalInits, sheAdslAtucIntervalFastR, sheAdslAtucIntervalFailedFastR, sheAdslAtucIntervalSesL, sheAdslAtucIntervalUasL, sheAdslAtucChanPerfDataTimeElapsed, sheAdslAtucChanPerfDataReceivedBlks, sheAdslAtucChanPerfDataTransmittedBlks, sheAdslAtucChanPerfDataCorrectedBlks, sheAdslAtucChanPerfDataUncorrectBlks, sheAdslAtucChanPerfDataNcd, sheAdslAtucChanPerfDataOcd, sheAdslAtucChanPerfDataHec, sheAdslAtucChanPerfDataValidIntervals, sheAdslAtucChanPerfDataInvalidIntervals, sheAdslAtucChanPerfDataCurr15MinTimeElapsed, sheAdslAtucChanPerfDataCurr15MinReceivedBlks, sheAdslAtucChanPerfDataCurr15MinTransmittedBlks, sheAdslAtucChanPerfDataCurr15MinCorrectedBlks, sheAdslAtucChanPerfDataCurr15MinUncorrectBlks, sheAdslAtucChanPerfDataCurr15MinNcd, sheAdslAtucChanPerfDataCurr15MinOcd, sheAdslAtucChanPerfDataCurr15MinHec, sheAdslAtucChanPerfDataCurr1DayTimeElapsed, sheAdslAtucChanPerfDataCurr1DayReceivedBlks, sheAdslAtucChanPerfDataCurr1DayTransmittedBlks, sheAdslAtucChanPerfDataCurr1DayCorrectedBlks, sheAdslAtucChanPerfDataCurr1DayUncorrectBlks, sheAdslAtucChanPerfDataCurr1DayNcd, sheAdslAtucChanPerfDataCurr1DayOcd, sheAdslAtucChanPerfDataCurr1DayHec, sheAdslAtucChanPerfDataPrev1DayMoniSecs, sheAdslAtucChanPerfDataPrev1DayReceivedBlks, sheAdslAtucChanPerfDataPrev1DayTransmittedBlks, sheAdslAtucChanPerfDataPrev1DayCorrectedBlks, sheAdslAtucChanPerfDataPrev1DayUncorrectBlks, sheAdslAtucChanPerfDataPrev1DayNcd, sheAdslAtucChanPerfDataPrev1DayOcd, sheAdslAtucChanPerfDataPrev1DayHec, sheAdslAtucChanIntervalNumber, sheAdslAtucChanIntervalValidData, sheAdslAtucChanIntervalEndTime, sheAdslAtucChanIntervalReceivedBlks, sheAdslAtucChanIntervalTransmittedBlks, sheAdslAtucChanIntervalCorrectedBlks, sheAdslAtucChanIntervalUncorrectBlks, sheAdslAtucChanIntervalNcd, sheAdslAtucChanIntervalOcd, sheAdslAtucChanIntervalHec, sheAdslAturPhysInvSerialNumber, sheAdslAturPhysInvVendorID, sheAdslAturPhysInvVersionNumber, sheAdslAturPhysCurrSnrMgn, sheAdslAturPhysCurrAtn, sheAdslAturPhysCurrStatus, sheAdslAturPhysCurrOutputPwr, sheAdslAturPhysCurrAttainableRate, sheAdslAturPhysConfig, sheAdslAturPhysDeltHLINSCds, sheAdslAturPhysDeltHLINpsds, sheAdslAturPhysDeltHLOGMTds, sheAdslAturPhysDeltHLOGpsds, sheAdslAturPhysDeltQLNMTds, sheAdslAturPhysDeltQLNpsds, sheAdslAturChanInterleaveDelay, sheAdslAturChanCurrTxRate, sheAdslAturChanPrevTxRate, sheAdslAturChanCrcBlockLength, sheAdslAturChanCurrAtmStatus, sheAdslAturChanRsSymbols, sheAdslAturChanRsDepth, sheAdslAturChanRsRedundancy, sheAdslAturPerfDataLofs, sheAdslAturPerfDataLoss, sheAdslAturPerfDataLprs, sheAdslAturPerfDataESs, sheAdslAturPerfDataStatSesL, sheAdslAturPerfDataStatUasL, sheAdslAturPerfDataValidIntervals, sheAdslAturPerfDataInvalidIntervals, sheAdslAturPerfDataCurr15MinTimeElapsed, sheAdslAturPerfDataCurr15MinLofs, sheAdslAturPerfDataCurr15MinLoss, sheAdslAturPerfDataCurr15MinLprs, sheAdslAturPerfDataCurr15MinESs, sheAdslAturPerfDataCurr15MinSesL, sheAdslAturPerfDataCurr15MinUasL, sheAdslAturPerfDataCurr1DayTimeElapsed, sheAdslAturPerfDataCurr1DayLofs, sheAdslAturPerfDataCurr1DayLoss, sheAdslAturPerfDataCurr1DayLprs, sheAdslAturPerfDataCurr1DayESs, sheAdslAturPerfDataCurr1DaySesL, sheAdslAturPerfDataCurr1DayUasL, sheAdslAturPerfDataPrev1DayMoniSecs, sheAdslAturPerfDataPrev1DayLofs, sheAdslAturPerfDataPrev1DayLoss, sheAdslAturPerfDataPrev1DayLprs, sheAdslAturPerfDataPrev1DayESs, sheAdslAturPerfDataPrev1DaySesL, sheAdslAturPerfDataPrev1DayUasL, sheAdslAturIntervalNumber, sheAdslAturIntervalValidData, sheAdslAturIntervalEndTime, sheAdslAturIntervalLofs, sheAdslAturIntervalLoss, sheAdslAturIntervalLprs, sheAdslAturIntervalESs, sheAdslAturIntervalSesL, sheAdslAturIntervalUasL, sheAdslAturChanPerfDataReceivedBlks, sheAdslAturChanPerfDataTransmittedBlks, sheAdslAturChanPerfDataCorrectedBlks, sheAdslAturChanPerfDataUncorrectBlks, sheAdslAturChanPerfDataExtnNcd, sheAdslAturChanPerfDataExtnHec, sheAdslAturChanPerfDataPerfValidIntervals, sheAdslAturChanPerfDataPerfInvalidIntervals, sheAdslAturChanPerfDataCurr15MinTimeElapsed, sheAdslAturChanPerfDataCurr15MinReceivedBlks, sheAdslAturChanPerfDataCurr15MinTransmittedBlks, sheAdslAturChanPerfDataCurr15MinCorrectedBlks, sheAdslAturChanPerfDataCurr15MinUncorrectBlks, sheAdslAturChanPerfDataExtnCurr15MinNcd, sheAdslAturChanPerfDataExtnCurr15MinHec, sheAdslAturChanPerfDataCurr1DayTimeElapsed, sheAdslAturChanPerfDataCurr1DayReceivedBlks, sheAdslAturChanPerfDataCurr1DayTransmittedBlks, sheAdslAturChanPerfDataCurr1DayCorrectedBlks, sheAdslAturChanPerfDataCurr1DayUncorrectBlks, sheAdslAturChanPerfDataExtnCurr1DayNcd, sheAdslAturChanPerfDataExtnCurr1DayHec, sheAdslAturChanPerfDataPrev1DayMoniSecs, sheAdslAturChanPerfDataPrev1DayReceivedBlks, sheAdslAturChanPerfDataPrev1DayTransmittedBlks, sheAdslAturChanPerfDataPrev1DayCorrectedBlks, sheAdslAturChanPerfDataPrev1DayUncorrectBlks, sheAdslAturChanPerfDataExtnPrev1DayNcd, sheAdslAturChanPerfDataExtnPrev1DayHec, sheAdslAturChanIntervalNumber, sheAdslAturChanIntervalValidData, sheAdslAturChanIntervalEndTime, sheAdslAturChanIntervalReceivedBlks, sheAdslAturChanIntervalTransmittedBlks, sheAdslAturChanIntervalCorrectedBlks, sheAdslAturChanIntervalUncorrectBlks, sheAdslAturChanIntervalNcd, sheAdslAturChanIntervalHec, sheAdslLineAlarmConfProfileIndex, sheAdslLineAlarmConfProfileName, sheAdslLineAlarmConfProfileOpStateTrapEnable, sheAdslLineAlarmConfProfileAtucThreshFastRateUp, sheAdslLineAlarmConfProfileAtucThreshInterleaveRateUp, sheAdslLineAlarmConfProfileAtucThreshFastRateDown, sheAdslLineAlarmConfProfileAtucThreshInterleaveRateDown, sheAdslLineAlarmConfProfileAtucInitFailureTrapEnable, sheAdslLineAlarmConfProfileAtucThresh15MinLofs, sheAdslLineAlarmConfProfileAtucThresh15MinLoss, sheAdslLineAlarmConfProfileAtucThresh15MinLols, sheAdslLineAlarmConfProfileAtucThresh15MinLprs, sheAdslLineAlarmConfProfileAtucThresh15MinESs, sheAdslLineAlarmConfProfileAtucThresh15MinSesL, sheAdslLineAlarmConfProfileAtucThresh15MinUasL, sheAdslLineAlarmConfProfileAtucThresh15MinFailFastR, sheAdslLineAlarmConfProfileAturThreshFastRateUp, sheAdslLineAlarmConfProfileAturThreshInterleaveRateUp, sheAdslLineAlarmConfProfileAturThreshFastRateDown, sheAdslLineAlarmConfProfileAturThreshInterleaveRateDown, sheAdslLineAlarmConfProfileAturThresh15MinLofs, sheAdslLineAlarmConfProfileAturThresh15MinLoss, sheAdslLineAlarmConfProfileAturThresh15MinLprs, sheAdslLineAlarmConfProfileAturThresh15MinESs, sheAdslLineAlarmConfProfileAturThresh15MinSesL, sheAdslLineAlarmConfProfileAturThresh15MinUasL, sheAdslRfiBandIndex, sheAdslRfiBandName, sheAdslRfiBandStartTone, sheAdslLineConfExtnProfilePSDMASKdsEnable, sheAdslLineDpboProfileIndex, sheAdslLineDpboProfileName, sheAdslLineDpboProfileEsel, sheAdslLineDpboProfileEselMin, sheAdslLineDpboProfileMus, sheAdslLineDpboProfileMof, sheAdslLineDpboProfileFMin, sheAdslLineDpboProfileFMax, sheAdslLineDpboProfileEpsd, sheAdslLineDpboProfileEScmA, sheAdslLineDpboProfileEScmB, sheAdslLineDpboProfileEScmC, sheAdslLineDpboProfile, sheAdslLineConfExtnProfileConfMinInpUs, sheAdslAtucPhysCurrentBinStatus, sheAdslRfiBandStopTone, sheAdslAtucPhysActState, sheAdslLineConfExtnProfileRfiBandMask, sheAdslLineConfExtnProfileControlRequest, sheAdslLineConfExtnProfileControlIndex, sheAdslLineConfExtnProfileControlStatus, sheAdslLineConfExtnProfileControlTimer, sheAdslLineConfExtnProfileControlReqResult, sheAdslLineConfExtnProfileControlTimeStamp, sheAdslLineConfExtnProfileControlName, sheAdslLineConfExtnProfileControlParametricTestInputFile, sheAdslLineConfExtnProfileControlRsIntCorrectionUp, sheAdslLineConfExtnProfileControlLineType, sheAdslLineConfExtnProfileControlTxEndBin, sheAdslLineConfExtnProfileControlTxStartBin, sheAdslLineConfExtnProfileControlMaxBitsPerBin, sheAdslLineConfExtnProfileControlRxStartBin, sheAdslLineConfExtnProfileControlRxEndBin, sheAdslLineConfExtnProfileControlRxBinAdjust, sheAdslLineConfExtnProfileControlTriggerMode, sheAdslLineConfExtnProfileControlAdi2x, sheAdslLineConfExtnProfileControlStandard, sheAdslLineConfExtnProfileControlInitiate, sheAdslLineConfExtnProfileControlTxPowerAttenuation, sheAdslLineConfExtnProfileControlCodingGain, sheAdslLineConfExtnProfileControlRsFastOvrhdDown, sheAdslLineConfExtnProfileControlIntCorrectionDown, sheAdslLineConfExtnProfileControlRsFastOvrhdUp, sheAdslLineConfExtnProfileControlDrStby, sheAdslLineConfExtnProfileControlExpandedExchange, sheAdslLineConfExtnProfileControlEscapeFastRetrainEnable, sheAdslLineConfExtnProfileControlFastRetrainEnable, sheAdslLineConfExtnProfileControlBitSwap, sheAdslLineConfExtnProfileControlNtr, sheAdslLineConfExtnProfileControlAnnexType, sheAdslLineConfExtnProfileControlAlctlUsVer, sheAdslLineConfExtnProfileControlUseCustomBin, sheAdslLineConfExtnProfileControlDnBinUsage, sheAdslLineConfExtnProfileControlMaxDCo, sheAdslLineConfExtnProfileControlFullRetrain, sheAdslLineConfExtnProfileControlAdvertisedCapabilities, sheAdslLineConfExtnProfileControlPsdMaskType, sheAdslLineConfExtnProfileControlLineDmtConfMode, sheAdslLineConfExtnProfileControlEraseProfiles, sheAdslLineConfExtnProfileControlParamHybridLossTestStart, sheAdslLineConfExtnProfileControlParamHybridLossTestEnd, sheAdslLineConfExtnProfileControlConfMinInp, sheAdslLineConfExtnProfileControlRfiBandMask, sheAdslLineConfExtnProfileControlUpstreamPsdMaskSelection, sheAdslLineConfExtnProfileControlMaxNomPsdDs, sheAdslLineConfExtnProfileControlMaxNomAtpDs, sheAdslLineConfExtnProfileControlPsdMaskDs, sheAdslLineConfExtnProfileControlPSDMASKdsEnable, sheAdslLineConfExtnProfileControlPSDMASKdsRequestResult, sheAdslLineConfExtnProfileControlConfMinInpUs, sheAdslLineUtopiaL2RxAddr, sheAdslLineUtopiaL2TxAddr, sheAdslLineClockType, sheAdslLineControlRequest, sheAdslLineControlIndex, sheAdslLineControlStatus, sheAdslLineControlTimer, sheAdslLineControlReqResult, sheAdslLineControlTimeStamp, sheAdslLineControlConfProfile, sheAdslLineControlAlarmConfProfile, sheAdslLineControlAction, sheAdslLineControlPwrMgmtPMSF, sheAdslLineControlDeltConfLDSF, sheAdslLineControlRfiBandMask, sheAdslLineControlDpboProfile, sheAdslAtucPhysCurrentBinBitLoading, sheAdslAturPhysCurrentBinBitLoading, sheAdslAturPhysDeltSNRMTds, sheAdslAtucPhysDeltSNRMTus, sheAdslAturPhysDeltDMTBinSNRds, sheAdslAtucPhysDeltDMTBinSNRus, sheAdslAtucPhysDeltSATNus, sheAdslAturPhysDeltSATNds, sheAdslAturPhysDeltLastTxState, sheAdslAtucPhysDeltLastTxState } STATUS current DESCRIPTION "Description." ::= { sheAdslGroups 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.100.2.5 sheAdslControlGroup OBJECT-GROUP OBJECTS { sheAdslLineConfProfileControlRequest, sheAdslLineConfProfileControlIndex, sheAdslLineConfProfileControlStatus, sheAdslLineConfProfileControlTimer, sheAdslLineConfProfileControlReqResult, sheAdslLineConfProfileControlTimeStamp, sheAdslLineConfProfileControlName, sheAdslLineConfProfileControlAtucConfRateMode, sheAdslLineConfProfileControlAtucConfRateChanRatio, sheAdslLineConfProfileControlAtucConfTargetSnrMgn, sheAdslLineConfProfileControlAtucConfMaxSnrMgn, sheAdslLineConfProfileControlAtucConfMinSnrMgn, sheAdslLineConfProfileControlAtucConfDownshiftSnrMgn, sheAdslLineConfProfileControlAtucConfUpshiftSnrMgn, sheAdslLineConfProfileControlAtucConfMinUpshiftTime, sheAdslLineConfProfileControlAtucConfMinDownshiftTime, sheAdslLineConfProfileControlAtucChanConfFastMinTxRate, sheAdslLineConfProfileControlAtucChanConfInterleaveMinTxRate, sheAdslLineConfProfileControlAtucChanConfFastMaxTxRate, sheAdslLineConfProfileControlAtucChanConfInterleaveMaxTxRate, sheAdslLineConfProfileControlAtucChanConfMaxInterleaveDelay, sheAdslLineConfProfileControlAturConfRateMode, sheAdslLineConfProfileControlAturConfRateChanRatio, sheAdslLineConfProfileControlAturConfTargetSnrMgn, sheAdslLineConfProfileControlAturConfMaxSnrMgn, sheAdslLineConfProfileControlAturConfMinSnrMgn, sheAdslLineConfProfileControlAturConfDownshiftSnrMgn, sheAdslLineConfProfileControlAturConfUpshiftSnrMgn, sheAdslLineConfProfileControlAturConfMinUpshiftTime, sheAdslLineConfProfileControlAturConfMinDownshiftTime, sheAdslLineConfProfileControlAturChanConfFastMinTxRate, sheAdslLineConfProfileControlAturChanConfInterleaveMinTxRate, sheAdslLineConfProfileControlAturChanConfFastMaxTxRate, sheAdslLineConfProfileControlAturChanConfInterleaveMaxTxRate, sheAdslLineConfProfileControlAturChanConfMaxInterleaveDelay, sheAdslLineConfProfileControlTrellis, sheAdslLineConfProfileControlAtucConfPwrMgmtL0Time, sheAdslLineConfProfileControlAtucConfPwrMgmtL2Time, sheAdslLineConfProfileControlAtucConfPwrMgmtL2ATPR, sheAdslLineConfProfileControlAtucConfPwrMgmtL2Rate, sheAdslLineConfProfileControlAtucConfPwrMgmtMode, sheAdslLineConfExtnProfileControlRequest, sheAdslLineConfExtnProfileControlIndex, sheAdslLineConfExtnProfileControlStatus, sheAdslLineConfExtnProfileControlTimer, sheAdslLineConfExtnProfileControlReqResult, sheAdslLineConfExtnProfileControlTimeStamp, sheAdslLineConfExtnProfileControlName, sheAdslLineConfExtnProfileControlRsIntCorrectionUp, sheAdslLineConfExtnProfileControlLineType, sheAdslLineConfExtnProfileControlTxEndBin, sheAdslLineConfExtnProfileControlTxStartBin, sheAdslLineConfExtnProfileControlRxStartBin, sheAdslLineConfExtnProfileControlRxEndBin, sheAdslLineConfExtnProfileControlStandard, sheAdslLineConfExtnProfileControlTxPowerAttenuation, sheAdslLineConfExtnProfileControlIntCorrectionDown, sheAdslLineConfExtnProfileControlBitSwap, sheAdslLineConfExtnProfileControlNtr, sheAdslLineConfExtnProfileControlAnnexType, sheAdslLineConfExtnProfileControlUseCustomBin, sheAdslLineConfExtnProfileControlDnBinUsage, sheAdslLineConfExtnProfileControlMaxDCo, sheAdslLineConfExtnProfileControlAdvertisedCapabilities, sheAdslLineConfExtnProfileControlPsdMaskType, sheAdslLineConfExtnProfileControlLineDmtConfMode, sheAdslLineConfExtnProfileControlEraseProfiles, sheAdslLineConfExtnProfileControlParamHybridLossTestStart, sheAdslLineConfExtnProfileControlParamHybridLossTestEnd, sheAdslLineConfExtnProfileControlConfMinInp, sheAdslLineConfExtnProfileControlUpstreamPsdMaskSelection, sheAdslLineConfExtnProfileControlMaxNomPsdDs, sheAdslLineConfExtnProfileControlMaxNomAtpDs, sheAdslLineConfExtnProfileControlPsdMaskDs, sheAdslLineControlRequest, sheAdslLineControlIndex, sheAdslLineControlStatus, sheAdslLineControlTimer, sheAdslLineControlReqResult, sheAdslLineControlTimeStamp, sheAdslLineControlConfProfile, sheAdslLineControlAlarmConfProfile, sheAdslLineControlAction, sheAdslLineControlPwrMgmtPMSF, sheAdslLineControlDeltConfLDSF, sheAdslLineControlRfiBandMask, sheAdslLineAlarmConfProfileControlRequest, sheAdslLineAlarmConfProfileControlIndex, sheAdslLineAlarmConfProfileControlStatus, sheAdslLineAlarmConfProfileControlTimer, sheAdslLineAlarmConfProfileControlReqResult, sheAdslLineAlarmConfProfileControlTimeStamp, sheAdslLineAlarmConfProfileControlName, sheAdslLineAlarmConfProfileControlOpStateTrapEnable, sheAdslLineAlarmConfProfileControlAtucThreshFastRateUp, sheAdslLineAlarmConfProfileControlAtucThreshInterleaveRateUp, sheAdslLineAlarmConfProfileControlAtucThreshFastRateDown, sheAdslLineAlarmConfProfileControlAtucThreshInterleaveRateDown, sheAdslLineAlarmConfProfileControlAtucInitFailureTrapEnable, sheAdslLineAlarmConfProfileControlAtucThresh15MinLofs, sheAdslLineAlarmConfProfileControlAtucThresh15MinLoss, sheAdslLineAlarmConfProfileControlAtucThresh15MinLols, sheAdslLineAlarmConfProfileControlAtucThresh15MinLprs, sheAdslLineAlarmConfProfileControlAtucThresh15MinESs, sheAdslLineAlarmConfProfileControlAtucThresh15MinFailFastR, sheAdslLineAlarmConfProfileControlAturThreshFastRateUp, sheAdslLineAlarmConfProfileControlAturThreshInterleaveRateUp, sheAdslLineAlarmConfProfileControlAturThreshFastRateDown, sheAdslLineAlarmConfProfileControlAturThreshInterleaveRateDown, sheAdslLineAlarmConfProfileControlAturThresh15MinLofs, sheAdslLineAlarmConfProfileControlAturThresh15MinLoss, sheAdslLineAlarmConfProfileControlAturThresh15MinLprs, sheAdslLineAlarmConfProfileControlAturThresh15MinESs, sheAdslRfiBandControlRequest, sheAdslRfiBandControlIndex, sheAdslRfiBandControlStatus, sheAdslRfiBandControlTimer, sheAdslRfiBandControlReqResult, sheAdslRfiBandControlTimeStamp, sheAdslRfiBandControlName, sheAdslRfiBandControlStartTone, sheAdslRfiBandControlStopTone, sheAdslAtucPsdRefMaskAdsl2AnnexA, sheAdslAtucPsdRefMaskAdsl2AnnexB, sheAdslAtucPsdRefMaskAdsl2plusAnnexA, sheAdslAtucPsdRefMaskAdsl2plusAnnexB, sheAdslAtucPsdRefMaskAnnexL, sheAdslLineControlDpboProfile, sheAdslLineDpboProfileControlRequest, sheAdslLineDpboProfileControlIndex, sheAdslLineDpboProfileControlStatus, sheAdslLineDpboProfileControlTimer, sheAdslLineDpboProfileControlReqResult, sheAdslLineDpboProfileControlTimeStamp, sheAdslLineDpboProfileControlName, sheAdslLineDpboProfileControlEsel, sheAdslLineDpboProfileControlEselMin, sheAdslLineDpboProfileControlMus, sheAdslLineDpboProfileControlMof, sheAdslLineDpboProfileControlFMin, sheAdslLineDpboProfileControlFMax, sheAdslLineDpboProfileControlEpsd, sheAdslLineDpboProfileControlEScmA, sheAdslLineDpboProfileControlEScmB, sheAdslLineDpboProfileControlEScmC, sheAdslLineConfExtnProfileControlConfMinInpUs, sheAdslLineAlarmConfProfileControlAtucThresh15MinSesL, sheAdslLineAlarmConfProfileControlAtucThresh15MinUasL, sheAdslLineAlarmConfProfileControlAturThresh15MinSesL, sheAdslLineAlarmConfProfileControlAturThresh15MinUasL, sheAdslLineConfExtnProfileControlPSDMASKdsRequestResult, sheAdslLineConfExtnProfileControlPSDMASKdsEnable } STATUS current DESCRIPTION "Description." ::= { sheAdslGroups 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.100.2.6 sheAdslNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { sheAdslAtucPerfLofsThreshTrap, sheAdslAtucPerfLossThreshTrap, sheAdslAtucPerfLolsThreshTrap, sheAdslAtucPerfLprsThreshTrap, sheAdslAtucPerfESsThreshTrap, sheAdslAtucRateChangeTrap, sheAdslAtucStatusTrap, sheAdslAtucFailedFastRThreshTrap, sheAdslLineStateTrap, sheAdslInitFailTrap, sheAdslAturRateChangeTrap, sheAdslAturPerfLofsThreshTrap, sheAdslAturPerfLossThreshTrap, sheAdslAturPerfLprsThreshTrap, sheAdslAturPerfESsThreshTrap, sheAdslAturStatusTrap, sheAdslLineConfProfileCreated, sheAdslLineConfProfileModified, sheAdslLineConfProfileDeleted, sheAdslLineConfExtnProfileModified, sheAdslLineAlarmConfProfileCreated, sheAdslLineAlarmConfProfileModified, sheAdslLineAlarmConfProfileDeleted, sheAdslLineConfigurationModified, sheAdslLinePerfCounterCleared, sheAdslLineConfProfileReqResult, sheAdslLineConfExtnProfileReqResult, sheAdslLineAlarmConfProfileReqResult, sheAdslLineAlarmLOS, sheAdslLineAlarmLOF, sheAdslLineAlarmLOL, sheAdslLineAlarmLPR, sheAdslLineAlarmIMNR, sheAdslRfiBandCreated, sheAdslLineDpboProfileCreated, sheAdslLineDpboProfileModified, sheAdslLineDpboProfileDeleted, sheAdslLineDpboProfileReqResult, sheAdslLineDpboProfileSetReqResult, sheAdslLineDpboProfileSetModified, sheAdslRfiBandDeleted, sheAdslLineInpValueTruncatedInto2, sheAdslLineActStateTrap, sheAdslAtucPerfSesLThreshTrap, sheAdslAtucPerfUasLThreshTrap, sheAdslAturPerfSesLThreshTrap, sheAdslAturPerfUasLThreshTrap } STATUS current DESCRIPTION "Description." ::= { sheAdslGroups 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.100.2.7 sheAdslDualChanGroup OBJECT-GROUP OBJECTS { sheAdslAtucDualChanInterleaveDelay, sheAdslAtucDualChanCurrTxRate, sheAdslAtucDualChanPrevTxRate, sheAdslAtucDualChanCrcBlockLength, sheAdslAtucDualChanCurrAtmStatus, sheAdslAtucDualChanRsSymbols, sheAdslAtucDualChanRsDepth, sheAdslAtucDualChanRsRedundancy, sheAdslAtucDualChanType, sheAdslAturDualChanInterleaveDelay, sheAdslAturDualChanCurrTxRate, sheAdslAturDualChanPrevTxRate, sheAdslAturDualChanCrcBlockLength, sheAdslAturDualChanCurrAtmStatus, sheAdslAturDualChanRsSymbols, sheAdslAturDualChanRsDepth, sheAdslAturDualChanRsRedundancy, sheAdslAturDualChanType, sheAdslAtucDualChanPerfDataTimeElapsed, sheAdslAtucDualChanPerfDataReceivedBlks, sheAdslAtucDualChanPerfDataTransmittedBlks, sheAdslAtucDualChanPerfDataCorrectedBlks, sheAdslAtucDualChanPerfDataUncorrectBlks, sheAdslAtucDualChanPerfDataNcd, sheAdslAtucDualChanPerfDataOcd, sheAdslAtucDualChanPerfDataHec, sheAdslAtucDualChanPerfDataValidIntervals, sheAdslAtucDualChanPerfDataInvalidIntervals, sheAdslAtucDualChanPerfDataCurr15MinTimeElapsed, sheAdslAtucDualChanPerfDataCurr15MinReceivedBlks, sheAdslAtucDualChanPerfDataCurr15MinTransmittedBlks, sheAdslAtucDualChanPerfDataCurr15MinCorrectedBlks, sheAdslAtucDualChanPerfDataCurr15MinUncorrectBlks, sheAdslAtucDualChanPerfDataCurr15MinNcd, sheAdslAtucDualChanPerfDataCurr15MinOcd, sheAdslAtucDualChanPerfDataCurr15MinHec, sheAdslAtucDualChanPerfDataCurr1DayTimeElapsed, sheAdslAtucDualChanPerfDataCurr1DayReceivedBlks, sheAdslAtucDualChanPerfDataCurr1DayTransmittedBlks, sheAdslAtucDualChanPerfDataCurr1DayCorrectedBlks, sheAdslAtucDualChanPerfDataCurr1DayUncorrectBlks, sheAdslAtucDualChanPerfDataCurr1DayNcd, sheAdslAtucDualChanPerfDataCurr1DayOcd, sheAdslAtucDualChanPerfDataCurr1DayHec, sheAdslAtucDualChanPerfDataPrev1DayMoniSecs, sheAdslAtucDualChanPerfDataPrev1DayReceivedBlks, sheAdslAtucDualChanPerfDataPrev1DayTransmittedBlks, sheAdslAtucDualChanPerfDataPrev1DayCorrectedBlks, sheAdslAtucDualChanPerfDataPrev1DayUncorrectBlks, sheAdslAtucDualChanPerfDataPrev1DayNcd, sheAdslAtucDualChanPerfDataPrev1DayOcd, sheAdslAtucDualChanPerfDataPrev1DayHec, sheAdslAturDualChanPerfDataReceivedBlks, sheAdslAturDualChanPerfDataTransmittedBlks, sheAdslAturDualChanPerfDataCorrectedBlks, sheAdslAturDualChanPerfDataUncorrectBlks, sheAdslAturDualChanPerfDataExtnNcd, sheAdslAturDualChanPerfDataExtnHec, sheAdslAturDualChanPerfDataPerfValidIntervals, sheAdslAturDualChanPerfDataPerfInvalidIntervals, sheAdslAturDualChanPerfDataCurr15MinTimeElapsed, sheAdslAturDualChanPerfDataCurr15MinReceivedBlks, sheAdslAturDualChanPerfDataCurr15MinTransmittedBlks, sheAdslAturDualChanPerfDataCurr15MinCorrectedBlks, sheAdslAturDualChanPerfDataCurr15MinUncorrectBlks, sheAdslAturDualChanPerfDataExtnCurr15MinNcd, sheAdslAturDualChanPerfDataExtnCurr15MinHec, sheAdslAturDualChanPerfDataCurr1DayTimeElapsed, sheAdslAturDualChanPerfDataCurr1DayReceivedBlks, sheAdslAturDualChanPerfDataCurr1DayTransmittedBlks, sheAdslAturDualChanPerfDataCurr1DayCorrectedBlks, sheAdslAturDualChanPerfDataCurr1DayUncorrectBlks, sheAdslAturDualChanPerfDataExtnCurr1DayNcd, sheAdslAturDualChanPerfDataExtnCurr1DayHec, sheAdslAturDualChanPerfDataPrev1DayMoniSecs, sheAdslAturDualChanPerfDataPrev1DayReceivedBlks, sheAdslAturDualChanPerfDataPrev1DayTransmittedBlks, sheAdslAturDualChanPerfDataPrev1DayCorrectedBlks, sheAdslAturDualChanPerfDataPrev1DayUncorrectBlks, sheAdslAturDualChanPerfDataExtnPrev1DayNcd, sheAdslAturDualChanPerfDataExtnPrev1DayHec, sheAdslAtucDualChanIntervalNumber, sheAdslAtucDualChanIntervalValidData, sheAdslAtucDualChanIntervalEndTime, sheAdslAtucDualChanIntervalReceivedBlks, sheAdslAtucDualChanIntervalTransmittedBlks, sheAdslAtucDualChanIntervalCorrectedBlks, sheAdslAtucDualChanIntervalUncorrectBlks, sheAdslAtucDualChanIntervalNcd, sheAdslAtucDualChanIntervalOcd, sheAdslAtucDualChanIntervalHec, sheAdslAturDualChanIntervalNumber, sheAdslAturDualChanIntervalValidData, sheAdslAturDualChanIntervalEndTime, sheAdslAturDualChanIntervalReceivedBlks, sheAdslAturDualChanIntervalTransmittedBlks, sheAdslAturDualChanIntervalCorrectedBlks, sheAdslAturDualChanIntervalUncorrectBlks, sheAdslAturDualChanIntervalNcd, sheAdslAturDualChanIntervalHec } STATUS current DESCRIPTION "Description." ::= { sheAdslGroups 7 } sheAdslObsoleteGroup OBJECT-GROUP OBJECTS { sheDslSystemLineTxCfg, sheDslSystemLineCodingType, sheDslSystemDslType, sheDslSystemParamControlRequest, sheDslSystemParamControlStatus, sheDslSystemParamControlTimer, sheDslSystemParamControlReqResult, sheDslSystemParamControlTimeStamp, sheDslSystemParamControlLineTxCfg, sheAdslCapabilityLineTxCap, sheAdslLineConfExtnProfileControlParametricTestInputFile, sheAdslLineConfExtnProfileControlMaxBitsPerBin, sheAdslLineConfExtnProfileControlTriggerMode, sheAdslLineConfExtnProfileControlAdi2x, sheAdslLineConfExtnProfileControlCodingGain, sheAdslLineConfExtnProfileControlDrStby, sheAdslLineConfExtnProfileControlEscapeFastRetrainEnable, sheAdslLineConfExtnProfileControlFastRetrainEnable, sheAdslLineConfExtnProfileControlAlctlUsVer, sheAdslLineConfExtnProfileControlFullRetrain, sheAdslLineConfExtnProfileControlRfiBandMask, sheAdslLineUtopiaL2RxAddr, sheAdslLineUtopiaL2TxAddr, sheAdslLineConfExtnProfileControlRxBinAdjust, sheAdslLineConfExtnProfileRfiBandMask, sheAdslLineClockType, sheAdslLineConfExtnProfileControlInitiate, sheAdslLineConfExtnProfileControlRsFastOvrhdDown, sheAdslLineConfExtnProfileControlRsFastOvrhdUp, sheAdslLineConfExtnProfileControlExpandedExchange } STATUS current DESCRIPTION "Description." ::= { sheAdslGroups 9 } -- 1.3.6.1.4.1.231.7.1.2.2.1.6.1.1.100.2.6 sheAdslObsoleteNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { sheAdslAtucPerfLpr, sheAdslAtucPerfLos, sheAdslAtucPerfLof, sheAdslAturPerfLos, sheAdslAturPerfLof, sheAdslAtucPerfLol } STATUS current DESCRIPTION "Description." ::= { sheAdslGroups 10 } END -- -- she-adsl-mib.mib --