-- **************************************************************************** -- FileName :mpIpv6Mib.my -- Description :Ipv6 Private MIB -- Revision History : -- Ver. mark date -- 01.00 - 08/07/2001 -- **************************************************************************** -- MP-IPV6-MIB DEFINITIONS ::= BEGIN IMPORTS mgmt, NetworkAddress, IpAddress, Counter, Gauge, TimeTicks FROM RFC1155-SMI ifIndex FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212 mmpf-mib FROM MMPF-MIB TRAP-TYPE FROM RFC-1215; Ipv6Address ::= OCTET STRING (SIZE (16)) -- The following definition is privately defined for IX5000 Private MIB mpIpv6 OBJECT IDENTIFIER ::= { mmpf-mib 131 } -- Ipv6 Private MIB mpIpv6PingTable OBJECT-TYPE SYNTAX SEQUENCE OF MpIpv6PingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of ping6 management information relevant to this entity's ICMPv6 echo identifier." ::= { mpIpv6 1 } mpIpv6PingEntry OBJECT-TYPE SYNTAX MpIpv6PingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ping6 management information for one of this entity's ICMPv6 echo identifier." INDEX { mpIpv6PingId } ::= { mpIpv6PingTable 1 } MpIpv6PingEntry ::= SEQUENCE { mpIpv6PingId INTEGER, mpIpv6PingTarget Ipv6Address, mpIpv6PingTargetSiteId INTEGER, mpIpv6PingRequestSend INTEGER, mpIpv6PingDataLength INTEGER, mpIpv6PingSendHopLimit INTEGER, mpIpv6PingSendTimeOut INTEGER, mpIpv6PingSendInterface INTEGER, mpIpv6PingStatus INTEGER, mpIpv6PingResult INTEGER, mpIpv6PingErrorSourceAddress Ipv6Address } mpIpv6PingId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the index to identify the ping6 entry. The value of this index must be assigned uniquely, within the range of 1 - 65535. But generable ping entry is four simultaneously." ::= { mpIpv6PingEntry 1 } mpIpv6PingTarget OBJECT-TYPE SYNTAX Ipv6Address ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is the destination IPv6 address for this entry. This IPv6 address must always be a unicast IPv6 address." ::= { mpIpv6PingEntry 2 } mpIpv6PingTargetSiteId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is the site id to which the destination belong, within the range of 1 - 8.(1 is default site.) it is necessary to set up this value, Only when a site local address is specified to be mpIpv6PingTarget. this value can be omitted and 1 is set up when it omits." ::= { mpIpv6PingEntry 3 } mpIpv6PingRequestSend OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object is the ping6 request number of the times, within the range of 1 - 65535(default 1)." ::= { mpIpv6PingEntry 4 } mpIpv6PingDataLength OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is the ping6 data length, within the range of 0 - 65507(default 64)." ::= { mpIpv6PingEntry 5 } mpIpv6PingSendHopLimit OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is the HOP LIMIT value in ping6 packet, within the range of 1 - 255(default 64)." ::= { mpIpv6PingEntry 6 } mpIpv6PingSendTimeOut OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is the ping6 time out value, within the range of 1 - 60 seconds(default 1)." ::= { mpIpv6PingEntry 7 } mpIpv6PingSendInterface OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is ifIndex. IPv6 address assigned ifIndex is set as source IPv6 address in ping6 packets." ::= { mpIpv6PingEntry 8 } mpIpv6PingStatus OBJECT-TYPE SYNTAX INTEGER { create(1), inProgress(2), complete(3), destroy(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This object refers to the ping6 entry status. When this object is set to create(1), ping6 entry is created. Set to inProgress(2), ping6 is Started. When a reply or icmpv6 error receiveed and time out occured, the status become complete(3). This object can not set to complete(3). Set to destroy(4), entry is deleted." ::= { mpIpv6PingEntry 9 } mpIpv6PingResult OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object refers to the ping6 result status." ::= { mpIpv6PingEntry 10 } mpIpv6PingErrorSourceAddress OBJECT-TYPE SYNTAX Ipv6Address ACCESS read-only STATUS mandatory DESCRIPTION "This value of this object is the error source IPv6 address in icmpv6 error reply message." ::= { mpIpv6PingEntry 11 } END