-- ***************************************************************** -- UPNP-MIB: ME1200 Private MIB -- -- -- **************************************************************** ME1200-UPNP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI TEXTUAL-CONVENTION FROM SNMPv2-TC me1200SwitchMgmt FROM CISCOME1200-MIB ME1200Unsigned8 FROM ME1200-TC Integer32 FROM SNMPv2-SMI TruthValue FROM SNMPv2-TC ; me1200UpnpMib MODULE-IDENTITY LAST-UPDATED "201404140000Z" ORGANIZATION "Cisco Systems, Inc" CONTACT-INFO "Cisco Systems, Inc Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-me1200@cisco.com" DESCRIPTION "This is a private version of UPnP" REVISION "201404140000Z" DESCRIPTION "Initial version" ::= { me1200SwitchMgmt 52 } me1200UpnpMibObjects OBJECT IDENTIFIER ::= { me1200UpnpMib 1 } me1200UpnpConfig OBJECT IDENTIFIER ::= { me1200UpnpMibObjects 2 } me1200UpnpConfigGlobals OBJECT IDENTIFIER ::= { me1200UpnpConfig 1 } me1200UpnpConfigGlobalsMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Global mode of UPnP. true(1) is to enable the functions of HTTPS and false(2) is to disable it." ::= { me1200UpnpConfigGlobals 1 } me1200UpnpConfigGlobalsTtl OBJECT-TYPE SYNTAX ME1200Unsigned8 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The TTL value is used by UPnP to send SSDP advertisement messages.Valid values are in the range 1 to 255. " ::= { me1200UpnpConfigGlobals 2 } me1200UpnpConfigGlobalsAdvertisingDuration OBJECT-TYPE SYNTAX Integer32 (100..86400) MAX-ACCESS read-write STATUS current DESCRIPTION "The duration, carried in SSDP packets, is used to inform a control point or control points how often it or they should receive an SSDP advertisement message from this switch. If a control point does not receive any message within the duration, it will think that the switch no longer exists. Due to the unreliable nature of UDP, in the standard it is recommended that such refreshing of advertisements to be done at less than one-half of the advertising duration. In the implementation, the switch sends SSDP messages periodically at the interval one-half of the advertising duration minus 30 seconds. Valid values are in the range 100 to 86400. " ::= { me1200UpnpConfigGlobals 3 } me1200UpnpMibConformance OBJECT IDENTIFIER ::= { me1200UpnpMib 2 } me1200UpnpMibCompliances OBJECT IDENTIFIER ::= { me1200UpnpMibConformance 1 } me1200UpnpMibGroups OBJECT IDENTIFIER ::= { me1200UpnpMibConformance 2 } me1200UpnpConfigGlobalsInfoGroup OBJECT-GROUP OBJECTS { me1200UpnpConfigGlobalsMode, me1200UpnpConfigGlobalsTtl, me1200UpnpConfigGlobalsAdvertisingDuration } STATUS current DESCRIPTION "A collection of objects suitable for bulk operations." ::= { me1200UpnpMibGroups 1 } me1200UpnpMibCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the implementation." MODULE -- this module MANDATORY-GROUPS { me1200UpnpConfigGlobalsInfoGroup } ::= { me1200UpnpMibCompliances 1 } END