-- ************************************************************************** -- -- $Id: MBG-LANTIME-MIB.mib 1.1 2012/08/31 06:25:09 philipp TRASH $ -- $Name: $ -- -- Copyright (c) Meinberg Funkuhren, 31812 Bad Pyrmont, Germany -- -- Description: -- Management Information Base for Meinberg LANTIME time server -- -- ************************************************************************** -- -- $Log: MBG-LANTIME-MIB.mib $ -- Revision 1.1 2012/08/31 06:25:09 philipp -- Revision 1.9 2011/30/03 12:00:00 philipp -- - added mbgLtPtp and PTP traps objects -- Revision 1.8 2011/28/02 10:12:45 heiko -- - added PTP objects -- Revision 1.7 2008/09/11 08:05:53 heiko -- - added MRS objects and Traps -- Revision 1.3.1.1 2008/09/10 13:18:48 heiko -- - 5.26e added MRS (XMR) Objects and Traps -- Revision 1.3 2006/08/24 13:07:55 heiko -- - now up to 7 external NTP servers -- - "prefer" flag can be set for each external NTP server -- - renumbered the remaining objects in mbgLtCfgNtp -- Revision 1.2 2006/08/23 09:51:05 heiko -- - new object mbgLtCmdSetRefTime for setting the time of the refclock via SNMP -- Revision 1.1 2006/08/23 09:35:41 heiko -- -- ************************************************************************** MBG-SNMP-LT-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE , Integer32, NOTIFICATION-TYPE FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF DisplayString FROM SNMPv2-TC mbgSnmpRoot FROM MBG-SNMP-ROOT-MIB; mbgLantime MODULE-IDENTITY LAST-UPDATED "201201250745Z" ORGANIZATION "www.meinberg.de" CONTACT-INFO "postal: Meinberg Funkuhren Lange Wand 9 31812 Bad Pyrmont Germany email: info@meinberg.de" DESCRIPTION " Meinberg SNMP Management Information Base " REVISION "201201250745Z" DESCRIPTION " Changed MIB module name." REVISION "201103300000Z" DESCRIPTION " Version 5.32l, added mbgLtPtp and PTP traps objects" REVISION "201103290000Z" DESCRIPTION " Version 5.32c, added mbgLtPtp Branch with PTP information objects " REVISION "201001190000Z" DESCRIPTION " Revised edition (V5.30i), added NTP Sync Trap definition" REVISION "200912030000Z" DESCRIPTION " Revised edition (V5.30g), added NTP Client Monitoring Trap definition" REVISION "200809100000Z" DESCRIPTION "Revised edition (V5.26e), added MRS Objects and Traps" REVISION "200807150000Z" DESCRIPTION "Revised edition (V5.26), added ReceiverSync Trap (14)" REVISION "200806150000Z" DESCRIPTION "Revised edition (V5.25), changed postal address" REVISION "200608230000Z" DESCRIPTION "Revised edition (V4.38), added mbgLtCmdSetRefTime" REVISION "200603200000Z" DESCRIPTION "Revised edition (V4.36) with changed Trap OID base" REVISION "200507080000Z" DESCRIPTION "Revised edition (V4.25)" ::= { mbgSnmpRoot 3 } -- -- General LANTIME information objects -- mbgLtInfo OBJECT IDENTIFIER ::= { mbgLantime 0 } mbgLtFirmwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "shows the installed firmware version of your LANTIME" ::= { mbgLtInfo 1 } mbgLtFirmwareVersionVal OBJECT-TYPE SYNTAX Integer32 (-2147483648..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "shows the installed firmware version of your LANTIME as an Integer32 value" ::= { mbgLtInfo 2 } -- -- Lantime NTP states -- mbgLtNtp OBJECT IDENTIFIER ::= { mbgLantime 1 } mbgLtNtpCurrentState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "actual state of the NTP as string" --- possible strings: --- "not synchronized" --- "no good refclock (->local)" --- "sync to external refclock" --- "sync to serial refclock" --- "Normal Operation (->PPS)" --- "Normal Operation (->internal refclock)" --- internal refclocks (PlugIn cards) have to be linked --- via /dev/refclock-2 and /dev/refclock-3 ::= { mbgLtNtp 1 } mbgLtNtpCurrentStateVal OBJECT-TYPE SYNTAX INTEGER { notSynchronized(0), noGoodRefclock(1), syncToExtRefclock(2), syncToSerialRefclock(3), normalOperationPPS(4), normalOperationRefclock(5), unknown(99) } MAX-ACCESS read-only STATUS current DESCRIPTION "current state of the NTP as Integer32 value" --- "0 : not synchronized" --- "1 : no good refclock (->local)" --- "2 : sync to external refclock" --- "3 : sync to serial refclock" --- "4 : Normal Operation (->PPS)" --- "5 : Normal Operation (->internal refclock)" DEFVAL { 99 } ::= { mbgLtNtp 2 } mbgLtNtpStratum OBJECT-TYPE SYNTAX Integer32 (-2147483648..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Stratum value of the NTP " DEFVAL { 99 } ::= { mbgLtNtp 3 } mbgLtNtpActiveRefclockId OBJECT-TYPE SYNTAX INTEGER { localClock(0), serialRefclock(1), pps(2), externalRefclock(3), notSync(99) } MAX-ACCESS read-only STATUS current DESCRIPTION "Index of the current refclock selected by the NTP " --- "0 : local clock" --- "1 : serial refclock --- "2 : PPS (Lantime/RD: second serial refclock" --- "3 : external Refclock (Lantime/RD: PPS) --- "99: NTP has not sync to any refclock" DEFVAL { 99 } ::= { mbgLtNtp 4 } mbgLtNtpActiveRefclockName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the current refclock selected by the NTP " ::= { mbgLtNtp 5 } mbgLtNtpActiveRefclockOffset OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Time offset between the current selected refclock and time of NTP as string" ::= { mbgLtNtp 6 } mbgLtNtpActiveRefclockOffsetVal OBJECT-TYPE SYNTAX Integer32 (-2147483648..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Time offset in micro seconds between the current selected refclock and time of NTP " DEFVAL { 1024000000 } ::= { mbgLtNtp 7 } mbgLtNtpNumberOfRefclocks OBJECT-TYPE SYNTAX Integer32 (-2147483648..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of refclocks configured in the NTP " DEFVAL { 0 } ::= { mbgLtNtp 8 } mbgLtNtpAuthKeyId OBJECT-TYPE SYNTAX Integer32 (-2147483648..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Authentication Key ID of active refclock is active " DEFVAL { 0 } ::= { mbgLtNtp 9 } mbgLtNtpVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "integrated NTP version " ::= { mbgLtNtp 10 } -- -- Lantime Refclock states -- mbgLtRefclock OBJECT IDENTIFIER ::= { mbgLantime 2 } mbgLtRefClockType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Type of refclock connected to NTP time server " ::= { mbgLtRefclock 1 } mbgLtRefClockTypeVal OBJECT-TYPE SYNTAX INTEGER { notavailable(0), mbgGPS167(1), mbgGPS167BGTTGP(2), mbgPZF509(3), mbgPZF509BGTTGP(4), mbgSHS(5), mbgSHSBGT(6), mbgSHSFRC(7), mbgSHSFRCBGT(8), mbgTCR509(9), mbgTCR509BGTTGP(10), mbgRDT(11), mbgRDTBGTTGP(12), mbgEDT(13), mbgEDTBGTTGP(14), mbgAHS(15), mbgDHS(16), mbgNDT167(17), mbgNDT167BGT(18), mbgDCT(19), mbgDCTBGT(20), mbgSHSTCR(21), mbgSHSTCRBGT(22) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of refclock connected to NTP time server as value" --- " 0: not available" --- " 1: GPS167 1HE" --- " 2: GPS167 BGT/TGP" --- " 3: PZF509 1HE" --- " 4: PZF509 BGT/TGP" --- " 5: SHS 1HE" --- " 6: SHS BGT" --- " 7: SHS-FRC 1HE" --- " 8: SHS-FRC BGT" --- " 9: TCR509 1HE" --- "10: TCR509 BGT/TGP" --- "11: RDT 1HE" --- "12: RDT BGT/TGP" --- "13: EDT 1HE" --- "14: EDT BGT/TGP" --- "15: AHS" --- "16: DHS" --- "17: NDT167 1HE" --- "18: NDT167 BGT" --- "19: DCT 1HE" --- "20: DCT BGT" --- "21: SHS-TCR 1HE" --- "22: SHS-TCR BGT" DEFVAL { 0 } ::= { mbgLtRefclock 2 } mbgLtRefClockMode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "current mode of refclock connected to NTP time server " ::= { mbgLtRefclock 3 } mbgLtRefClockModeVal OBJECT-TYPE SYNTAX INTEGER { notavailable(0), normalOperation(1), trackingSearching(2), antennaFaulty(3), warmBoot(4), coldBoot(5), antennaShortcircuit(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "current mode of refclock connected to NTP time server as value" --- " 0: not available" --- " 1: Normal Operation" --- " 2: Tracking/Searching" --- " 3: Antenna Faulty" --- " 4: Warm Boot" --- " 5: Cold Boot" --- " 6: Antenna Short Circuit" DEFVAL { 0 } ::= { mbgLtRefclock 4 } mbgLtRefGpsState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "current State of GPS refclock conneted to NTP time server " ::= { mbgLtRefclock 5 } mbgLtRefGpsStateVal OBJECT-TYPE SYNTAX INTEGER { notavailable(0), synchronized(1), notsynchronized(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "current State of GPS refclock conneted to NTP time server as value" --- " 0: not available" --- " 1: synchronized" --- " 2: not synchronized" DEFVAL { 0 } ::= { mbgLtRefclock 6 } mbgLtRefGpsPosition OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "current Position of GPS refclock conneted to NTP time server " ::= { mbgLtRefclock 7 } mbgLtRefGpsSatellites OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "current Satellites in view and good of GPS refclock connected to NTP time server " ::= { mbgLtRefclock 8 } mbgLtRefGpsSatellitesGood OBJECT-TYPE SYNTAX Integer32 (-2147483648..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "current good Satellites of GPS refclock connected to NTP time server as value" ::= { mbgLtRefclock 9 } mbgLtRefGpsSatellitesInView OBJECT-TYPE SYNTAX Integer32 (-2147483648..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "current Satellites in view of GPS refclock conneted to NTP time server as value" ::= { mbgLtRefclock 10 } mbgLtRefPzfState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "current State of DCF77/PZF refclock connected to NTP time server " ::= { mbgLtRefclock 11 } mbgLtRefPzfStateVal OBJECT-TYPE SYNTAX INTEGER { notavailable(0), sync(1), notsyncnow(2), neversynced(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "current State of DCF77/PZF refclock connected to NTP time server as value" --- " 0: not available" --- " 1: sync" --- " 2: not sync now" --- " 3: never synced" DEFVAL { 0 } ::= { mbgLtRefclock 12 } mbgLtRefPzfKorrelation OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "current Korrelation of DCF77/PZF refclock connected to NTP time server " --- " 0: not available" --- " 254: Antenna Faulty" --- " 255: Gsync" --- " minimum of 60 to get synchronization" --- " optimal value of 75" DEFVAL { 0 } ::= { mbgLtRefclock 13 } mbgLtRefPzfField OBJECT-TYPE SYNTAX Integer32 (-2147483648..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "current strength of field of DCF77/PZF refclock connected to NTP time server " --- " 0: not available" DEFVAL { 0 } ::= { mbgLtRefclock 14 } mbgLtRefGpsMode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "current Mode of GPS refclock connected to NTP time server " ::= { mbgLtRefclock 15 } mbgLtRefGpsModeVal OBJECT-TYPE SYNTAX INTEGER { notavailable(0), normalOperation(1), trackingSearching(2), antennaFaulty(3), warmBoot(4), coldBoot(5), antennaShortcircuit(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "current Mode of GPS refclock connected to NTP time server as value" --- " 0: not available" --- " 1: Normal Operation" --- " 2: Tracking/Searching" --- " 3: Antenna Faulty" --- " 4: Warm Boot" --- " 5: Cold Boot" --- " 6: Antenna Short Circuit" --- This variable was formerly known as mbgLtRefClockModeVal DEFVAL { 0 } ::= { mbgLtRefclock 16 } mbgLtRefIrigMode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "current Mode of IRIG refclock conneted to NTP time server " ::= { mbgLtRefclock 17 } mbgLtRefIrigModeVal OBJECT-TYPE SYNTAX INTEGER { notavailable(0), locked(1), notlocked(2), telegramError(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "current Mode of IRIG refclock conneted to NTP time server as value" --- " 0: not available" --- " 1: Sync (locked)" --- " 2: Not sync (not locked)" --- " 3: Telegram error" DEFVAL { 0 } ::= { mbgLtRefclock 18 } mbgLtRefPzfMode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "current Mode of PZF refclock connected to NTP time server " ::= { mbgLtRefclock 19 } mbgLtRefPzfModeVal OBJECT-TYPE SYNTAX INTEGER { notavailable(0), normalOperation(1), antennaFaulty(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "current Mode of PZF refclock connected to NTP time server as value" --- " 0: not available" --- " 1: Normal Operation" --- " 2: Antenna Faulty" DEFVAL { 0 } ::= { mbgLtRefclock 20 } mbgLtRefIrigState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "current State of IRIG refclock connected to NTP time server " ::= { mbgLtRefclock 21 } mbgLtRefIrigStateVal OBJECT-TYPE SYNTAX Integer32 (-2147483648..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "current State of IRIG refclock connected to NTP time server as value" --- Please refer to manual for IRIG states. They are represented by set/unset bits, --- so this value is a "binary" form combining all possible IRIG states of our IRIG refclock DEFVAL { 0 } ::= { mbgLtRefclock 22 } mbgLtRefSHSMode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "current Mode of SHS system connected to NTP time server " ::= { mbgLtRefclock 23 } mbgLtRefSHSModeVal OBJECT-TYPE SYNTAX INTEGER { notavailable(0), normalOperation(1), stoppedTimeLimitError(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "current Mode of SHS system connected to NTP time server as value" --- " 0: not available" --- " 1: Normal Operation" --- " 2: Stopped/Time Limit Error" DEFVAL { 0 } ::= { mbgLtRefclock 24 } mbgLtRefSHSTimeDiff OBJECT-TYPE SYNTAX Integer32 (-2147483648..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "current time difference between the two SHS reference time sources in miliseconds" DEFVAL { 0 } ::= { mbgLtRefclock 25 } mbgLtRefDctState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "current State of DCF77 refclock connected to NTP time server " ::= { mbgLtRefclock 26 } mbgLtRefDctStateVal OBJECT-TYPE SYNTAX INTEGER { notavailable(0), sync(1), notsyncnow(2), neversynced(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "current State of DCF77 refclock connected to NTP time server as value" --- " 0: not available" --- " 1: sync" --- " 2: not sync now" --- " 3: never synced" DEFVAL { 0 } ::= { mbgLtRefclock 27 } mbgLtRefDctField OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "current strength of field of DCF77 refclock connected to NTP time server " --- " 0: not available" DEFVAL { "0" } ::= { mbgLtRefclock 28 } mbgLtRefDctMode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "current Mode of DCF77 refclock connected to NTP time server " ::= { mbgLtRefclock 29 } mbgLtRefDctModeVal OBJECT-TYPE SYNTAX INTEGER { notavailable(0), normalOperation(1), antennaFaulty(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "current Mode of DCF77 refclock connected to NTP time server as value" --- " 0: not available" --- " 1: Normal Operation" --- " 2: Antenna Faulty" DEFVAL { 0 } ::= { mbgLtRefclock 30 } mbgLtRefGpsLeapSecond OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Date and Time of leap second announcement received via GPS" ::= { mbgLtRefclock 31 } mbgLtRefGpsLeapCorrection OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Leap Second Correction received via GPS" --- Possible values are: --- -1 (negative leap second, never happened so far) --- 0 (no leap second announcement received) --- 1 (positive leap second, will be inserted between 23:59:59 on the the leap second date --- and 00:00:00 on the day after the leap second date DEFVAL { 0 } ::= { mbgLtRefclock 32 } -- -- MRS (Multi Reference Source) Section -- mbgLtMrs OBJECT IDENTIFIER ::= { mbgLtRefclock 50 } mbgLtRefMrsRef OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ID of currently active reference source as a string" -- Examples: gps,ntp,irig,pps,frequency,ptp ::= { mbgLtMrs 1 } mbgLtRefMrsRefVal OBJECT-TYPE SYNTAX INTEGER { notavailable(0), refGps(1), refIrig(2), refPps(3), refFreq(4), refPtp(5), refNtp(6), refFreeRun(99) } MAX-ACCESS read-only STATUS current DESCRIPTION "currently active reference as a value" -- 0: not available (no MRS/initializing) -- 1: GPS -- 2: IRIG (Time Code, both DCLS and AM possible) -- 3: PPS (Pulse Per Second) -- 4: Frequency (e.g. 10MHz) -- 5: PTP/IEEE1588 (synchronized by a PTP Grandmaster) -- 6: NTP/Network Time Protocol (synchronized by an NTP server) -- 99: Free running (no sync source, internal oscillator is freewheeling) ::= { mbgLtMrs 2 } mbgLtRefMrsRefList OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "List of all supported MRS references in a comma separated list" -- Example: "gps,irig,ntp,ptp,pps,freq" ::= { mbgLtMrs 3 } mbgLtRefMrsPrioList OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "List of all active MRS references in a comma separated list sorted by priority" -- Example: "gps,irig,ntp,ptp,pps,freq" -- "active" means that a priority has been assigne to the reference ::= { mbgLtMrs 4 } -- -- MRS Reference Sources Status Section -- mbgLtMrsRef OBJECT IDENTIFIER ::= { mbgLtMrs 10 } mbgLtMrsRefGps OBJECT IDENTIFIER ::= { mbgLtMrsRef 1 } mbgLtMrsGpsOffs OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Offset of this reference to the currently active reference, unit included in the string" -- Example : "100.0ns" ::= { mbgLtMrsRefGps 1 } mbgLtMrsGpsOffsVal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Offset of this reference to the currently active reference, unit see below" -- Example : "100" ::= { mbgLtMrsRefGps 2 } mbgLtMrsGpsOffsBase OBJECT-TYPE SYNTAX INTEGER { baseSeconds(0), baseMiliseconds(3), baseMicroseconds(6), baseNanoseconds(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "base of the offset value shown in mbgLtMrsGpsOffsVal" -- In order to calculate the offset in seconds, multiply mbgLtMrsGpsOffsVal with -- 10^(-x) where x is mbgLtMrsGpsOffsBase -- Example: -- mbgLtMrsOffsVal = 65 -- mbgLtMrsOffsBase = 9 -- Offset is 65*10^(-9) = 0.000000065 Seconds ::= { mbgLtMrsRefGps 3 } mbgLtMrsGpsPrio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "the configured priority of this reference" ::= { mbgLtMrsRefGps 4 } mbgLtMrsGpsState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "the current status of this reference as a string" -- Example: "is Master", "no signal" ::= { mbgLtMrsRefGps 5 } mbgLtMrsGpsStateVal OBJECT-TYPE SYNTAX INTEGER { notAvailable(0), notSupported(1), notConnected(2), noSignal(3), hasLocked(4), isAvailable(5), isAccurate(6), isMaster(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "the current status of this reference as an Integer value" -- 0: reference source not available -- 1: not supported in this system -- 2: nothing connected to this input* -- 3: no signal detected* -- 4: reference source has locked to the signal* -- 5: reference is available -- 6: reference is considered valid and accurate* -- 7: reference is the current MRS master -- NOTE: -- States marked with * are not supported by all references ::= { mbgLtMrsRefGps 6 } mbgLtMrsGpsPrecision OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Precision Factor of this reference in nanoseconds" -- Example : "100" -- Note: Only positive values allowed ::= { mbgLtMrsRefGps 7 } -- -- IRIG reference source (for both AM and DCLS input interfaces) -- mbgLtMrsRefIrig OBJECT IDENTIFIER ::= { mbgLtMrsRef 2 } mbgLtMrsIrigOffs OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Offset of this reference to the currently active reference, unit included in the string" -- Example : "100.0ns" ::= { mbgLtMrsRefIrig 1 } mbgLtMrsIrigOffsVal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Offset of this reference to the currently active reference, unit see below" -- Example : "100" ::= { mbgLtMrsRefIrig 2 } mbgLtMrsIrigOffsBase OBJECT-TYPE SYNTAX INTEGER { baseSeconds(0), baseMiliseconds(3), baseMicroseconds(6), baseNanoseconds(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "base of the offset value shown in mbgLtMrsIrigOffsVal" -- In order to calculate the offset in seconds, multiply mbgLtMrsIrigOffsVal with -- 10^(-x) where x is mbgLtMrsIrigOffsBase -- Example: -- mbgLtMrsOffsVal = 65 -- mbgLtMrsOffsBase = 9 -- Offset is 65*10^(-9) = 0.000000065 Seconds ::= { mbgLtMrsRefIrig 3 } mbgLtMrsIrigPrio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "the configured priority of this reference" ::= { mbgLtMrsRefIrig 4 } mbgLtMrsIrigState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "the current status of this reference as a string" -- Example: "is Master", "no signal" ::= { mbgLtMrsRefIrig 5 } mbgLtMrsIrigStateVal OBJECT-TYPE SYNTAX INTEGER { notAvailable(0), notSupported(1), notConnected(2), noSignal(3), hasLocked(4), isAvailable(5), isAccurate(6), isMaster(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "the current status of this reference as an Integer value" -- 0: reference source not available -- 1: not supported in this system -- 2: nothing connected to this input* -- 3: no signal detected* -- 4: reference source has locked to the signal* -- 5: reference is available -- 6: reference is considered valid and accurate* -- 7: reference is the current MRS master -- NOTE: -- States marked with * are not supported by all references ::= { mbgLtMrsRefIrig 6 } mbgLtMrsIrigCorr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Correction Value (Fixed Offset) of this reference in nanoseconds" -- Example : "+100" ::= { mbgLtMrsRefIrig 7 } mbgLtMrsIrigOffsLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Offset Limit in nanoseconds, if exceeded this will trigger a notification" -- Example : "100" ::= { mbgLtMrsRefIrig 8 } mbgLtMrsIrigPrecision OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Precision Factor of this reference in nanoseconds" -- Example : "100" -- Note: Only positive values allowed ::= { mbgLtMrsRefIrig 9 } -- -- PPS reference source -- mbgLtMrsRefPps OBJECT IDENTIFIER ::= { mbgLtMrsRef 3 } mbgLtMrsPpsOffs OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Offset of this reference to the currently active reference, unit included in the string" -- Example : "100.0ns" ::= { mbgLtMrsRefPps 1 } mbgLtMrsPpsOffsVal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Offset of this reference to the currently active reference, unit see below" -- Example : "100" ::= { mbgLtMrsRefPps 2 } mbgLtMrsPpsOffsBase OBJECT-TYPE SYNTAX INTEGER { baseSeconds(0), baseMiliseconds(3), baseMicroseconds(6), baseNanoseconds(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "base of the offset value shown in mbgLtMrsPpsOffsVal" -- In order to calculate the offset in seconds, multiply mbgLtMrsPpsOffsVal with -- 10^(-x) where x is mbgLtMrsPpsOffsBase -- Example: -- mbgLtMrsOffsVal = 65 -- mbgLtMrsOffsBase = 9 -- Offset is 65*10^(-9) = 0.000000065 Seconds ::= { mbgLtMrsRefPps 3 } mbgLtMrsPpsPrio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "the configured priority of this reference" ::= { mbgLtMrsRefPps 4 } mbgLtMrsPpsState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "the current status of this reference as a string" -- Example: "is Master", "no signal" ::= { mbgLtMrsRefPps 5 } mbgLtMrsPpsStateVal OBJECT-TYPE SYNTAX INTEGER { notAvailable(0), notSupported(1), notConnected(2), noSignal(3), hasLocked(4), isAvailable(5), isAccurate(6), isMaster(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "the current status of this reference as an Integer value" -- 0: reference source not available -- 1: not supported in this system -- 2: nothing connected to this input* -- 3: no signal detected* -- 4: reference source has locked to the signal* -- 5: reference is available -- 6: reference is considered valid and accurate* -- 7: reference is the current MRS master -- NOTE: -- States marked with * are not supported by all references ::= { mbgLtMrsRefPps 6 } mbgLtMrsPpsCorr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Correction Value (Fixed Offset) of this reference in nanoseconds" -- Example : "+100" ::= { mbgLtMrsRefPps 7 } mbgLtMrsPpsOffsLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Offset Limit in nanoseconds, if exceeded this will trigger a notification" -- Example : "100" ::= { mbgLtMrsRefPps 8 } mbgLtMrsPpsPrecision OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Precision Factor of this reference in nanoseconds" -- Example : "100" -- Note: Only positive values allowed ::= { mbgLtMrsRefPps 9 } -- -- Frequency reference source (can be 10 MHz or 2048kHz) -- mbgLtMrsRefFreq OBJECT IDENTIFIER ::= { mbgLtMrsRef 4 } mbgLtMrsFreqOffs OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Offset of this reference to the currently active reference, unit included in the string" -- Example : "100.0ns" ::= { mbgLtMrsRefFreq 1 } mbgLtMrsFreqOffsVal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Offset of this reference to the currently active reference, unit see below" -- Example : "100" ::= { mbgLtMrsRefFreq 2 } mbgLtMrsFreqOffsBase OBJECT-TYPE SYNTAX INTEGER { baseSeconds(0), baseMiliseconds(3), baseMicroseconds(6), baseNanoseconds(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "base of the offset value shown in mbgLtMrsFreqOffsVal" -- In order to calculate the offset in seconds, multiply mbgLtMrsFreqOffsVal with -- 10^(-x) where x is mbgLtMrsFreqOffsBase -- Example: -- mbgLtMrsOffsVal = 65 -- mbgLtMrsOffsBase = 9 -- Offset is 65*10^(-9) = 0.000000065 Seconds ::= { mbgLtMrsRefFreq 3 } mbgLtMrsFreqPrio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "the configured priority of this reference" ::= { mbgLtMrsRefFreq 4 } mbgLtMrsFreqState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "the current status of this reference as a string" -- Example: "is Master", "no signal" ::= { mbgLtMrsRefFreq 5 } mbgLtMrsFreqStateVal OBJECT-TYPE SYNTAX INTEGER { notAvailable(0), notSupported(1), notConnected(2), noSignal(3), hasLocked(4), isAvailable(5), isAccurate(6), isMaster(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "the current status of this reference as an Integer value" -- 0: reference source not available -- 1: not supported in this system -- 2: nothing connected to this input* -- 3: no signal detected* -- 4: reference source has locked to the signal* -- 5: reference is available -- 6: reference is considered valid and accurate* -- 7: reference is the current MRS master -- NOTE: -- States marked with * are not supported by all references ::= { mbgLtMrsRefFreq 6 } mbgLtMrsFreqCorr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Correction Value (Fixed Offset) of this reference in nanoseconds" -- Example : "+100" ::= { mbgLtMrsRefFreq 7 } mbgLtMrsFreqOffsLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Offset Limit in nanoseconds, if exceeded this will trigger a notification" -- Example : "100" ::= { mbgLtMrsRefFreq 8 } mbgLtMrsFreqPrecision OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Precision Factor of this reference in nanoseconds" -- Example : "100" -- Note: Only positive values allowed ::= { mbgLtMrsRefFreq 9 } -- -- PTP/IEEE1588 reference source -- mbgLtMrsRefPtp OBJECT IDENTIFIER ::= { mbgLtMrsRef 5 } mbgLtMrsPtpOffs OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Offset of this reference to the currently active reference, unit included in the string" -- Example : "100.0ns" ::= { mbgLtMrsRefPtp 1 } mbgLtMrsPtpOffsVal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Offset of this reference to the currently active reference, unit see below" -- Example : "100" ::= { mbgLtMrsRefPtp 2 } mbgLtMrsPtpOffsBase OBJECT-TYPE SYNTAX INTEGER { baseSeconds(0), baseMiliseconds(3), baseMicroseconds(6), baseNanoseconds(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "base of the offset value shown in mbgLtMrsPtpOffsVal" -- In order to calculate the offset in seconds, multiply mbgLtMrsPtpOffsVal with -- 10^(-x) where x is mbgLtMrsPtpOffsBase -- Example: -- mbgLtMrsOffsVal = 65 -- mbgLtMrsOffsBase = 9 -- Offset is 65*10^(-9) = 0.000000065 Seconds ::= { mbgLtMrsRefPtp 3 } mbgLtMrsPtpPrio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "the configured priority of this reference" ::= { mbgLtMrsRefPtp 4 } mbgLtMrsPtpState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "the current status of this reference as a string" -- Example: "is Master", "no signal" ::= { mbgLtMrsRefPtp 5 } mbgLtMrsPtpStateVal OBJECT-TYPE SYNTAX INTEGER { notAvailable(0), notSupported(1), notConnected(2), noSignal(3), hasLocked(4), isAvailable(5), isAccurate(6), isMaster(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "the current status of this reference as an Integer value" -- 0: reference source not available -- 1: not supported in this system -- 2: nothing connected to this input* -- 3: no signal detected* -- 4: reference source has locked to the signal* -- 5: reference is available -- 6: reference is considered valid and accurate* -- 7: reference is the current MRS master -- NOTE: -- States marked with * are not supported by all references ::= { mbgLtMrsRefPtp 6 } mbgLtMrsPtpCorr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Correction Value (Fixed Offset) of this reference in nanoseconds" -- Example : "+100" ::= { mbgLtMrsRefPtp 7 } mbgLtMrsPtpOffsLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Offset Limit in nanoseconds, if exceeded this will trigger a notification" -- Example : "100" ::= { mbgLtMrsRefPtp 8 } mbgLtMrsPtpPrecision OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Precision Factor of this reference in nanoseconds" -- Example : "100" -- Note: Only positive values allowed ::= { mbgLtMrsRefPtp 9 } -- -- NTP reference source -- mbgLtMrsRefNtp OBJECT IDENTIFIER ::= { mbgLtMrsRef 6 } mbgLtMrsNtpOffs OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Offset of this reference to the currently active reference, unit included in the string" -- Example : "100.0ns" ::= { mbgLtMrsRefNtp 1 } mbgLtMrsNtpOffsVal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Offset of this reference to the currently active reference, unit see below" -- Example : "100" ::= { mbgLtMrsRefNtp 2 } mbgLtMrsNtpOffsBase OBJECT-TYPE SYNTAX INTEGER { baseSeconds(0), baseMiliseconds(3), baseMicroseconds(6), baseNanoseconds(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "base of the offset value shown in mbgLtMrsNtpOffsVal" -- In order to calculate the offset in seconds, multiply mbgLtMrsNtpOffsVal with -- 10^(-x) where x is mbgLtMrsNtpOffsBase -- Example: -- mbgLtMrsOffsVal = 65 -- mbgLtMrsOffsBase = 9 -- Offset is 65*10^(-9) = 0.000000065 Seconds ::= { mbgLtMrsRefNtp 3 } mbgLtMrsNtpPrio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "the configured priority of this reference" ::= { mbgLtMrsRefNtp 4 } mbgLtMrsNtpState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "the current status of this reference as a string" -- Example: "is Master", "no signal" ::= { mbgLtMrsRefNtp 5 } mbgLtMrsNtpStateVal OBJECT-TYPE SYNTAX INTEGER { notAvailable(0), notSupported(1), notConnected(2), noSignal(3), hasLocked(4), isAvailable(5), isAccurate(6), isMaster(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "the current status of this reference as an Integer value" -- 0: reference source not available -- 1: not supported in this system -- 2: nothing connected to this input* -- 3: no signal detected* -- 4: reference source has locked to the signal* -- 5: reference is available -- 6: reference is considered valid and accurate* -- 7: reference is the current MRS master -- NOTE: -- States marked with * are not supported by all references ::= { mbgLtMrsRefNtp 6 } mbgLtMrsNtpCorr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Correction Value (Fixed Offset) of this reference in nanoseconds" -- Example : "+100" ::= { mbgLtMrsRefNtp 7 } mbgLtMrsNtpOffsLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Offset Limit in nanoseconds, if exceeded this will trigger a notification" -- Example : "100" ::= { mbgLtMrsRefNtp 8 } mbgLtMrsNtpPrecision OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Precision Factor of this reference in nanoseconds" -- Example : "100" -- Note: Only positive values allowed ::= { mbgLtMrsRefNtp 9 } -- -- Lantime SNMP trap definitions -- mbgLtNotifications OBJECT IDENTIFIER ::= { mbgLantime 3 } mbgLtTraps OBJECT IDENTIFIER ::= { mbgLtNotifications 0 } mbgLtTrapNTPNotSync NOTIFICATION-TYPE STATUS current DESCRIPTION "trap to be sent when NTP is not synchronised " ::= { mbgLtTraps 1 } mbgLtTrapNTPStopped NOTIFICATION-TYPE STATUS current DESCRIPTION "trap to be sent when NTP is stopped " ::= { mbgLtTraps 2 } mbgLtTrapServerBoot NOTIFICATION-TYPE STATUS current DESCRIPTION "trap to be sent when time server has finished boot sequence " ::= { mbgLtTraps 3 } mbgLtTrapReceiverNotResponding NOTIFICATION-TYPE STATUS current DESCRIPTION "trap to be sent when receiver is not responding " ::= { mbgLtTraps 4 } mbgLtTrapReceiverNotSync NOTIFICATION-TYPE STATUS current DESCRIPTION "trap to be sent when receiver is not synchronised " ::= { mbgLtTraps 5 } mbgLtTrapAntennaFaulty NOTIFICATION-TYPE STATUS current DESCRIPTION "trap to be sent when connection to antenna is broken " ::= { mbgLtTraps 6 } mbgLtTrapAntennaReconnect NOTIFICATION-TYPE STATUS current DESCRIPTION "trap to be sent when antenna has been reconnected " ::= { mbgLtTraps 7 } mbgLtTrapConfigChanged NOTIFICATION-TYPE STATUS current DESCRIPTION "trap to be sent when timeserver reloaded its configuration " ::= { mbgLtTraps 8 } mbgLtTrapLeapSecondAnnounced NOTIFICATION-TYPE STATUS current DESCRIPTION "trap to be sent when a leap second has been announced " ::= { mbgLtTraps 9 } mbgLtTrapSHSTimeLimitError NOTIFICATION-TYPE STATUS current DESCRIPTION "trap to be sent when SHS timelimit exceeded " ::= { mbgLtTraps 10 } mbgLtTrapSecondaryRecNotSync NOTIFICATION-TYPE STATUS current DESCRIPTION "trap to be sent when secondary receiver in SHS system is not synchronised " ::= { mbgLtTraps 11 } mbgLtTrapPowerSupplyFailure NOTIFICATION-TYPE STATUS current DESCRIPTION "trap to be sent when one of the redundant power supplies fails" ::= { mbgLtTraps 12 } mbgLtTrapAntennaShortCircuit NOTIFICATION-TYPE STATUS current DESCRIPTION "trap to be sent when a connected antenna fails due to a short circuit" ::= { mbgLtTraps 13 } mbgLtTrapReceiverSync NOTIFICATION-TYPE STATUS current DESCRIPTION "trap to be sent when receiver is synchronised " ::= { mbgLtTraps 14 } mbgLtTrapNTPClientAlarm NOTIFICATION-TYPE STATUS current DESCRIPTION "trap to be sent when an NTP Client Monitoring alarm occurs, e.g. when a monitored client is not reachable. " ::= { mbgLtTraps 15 } mbgLtTrapPowerSupplyUp NOTIFICATION-TYPE STATUS current DESCRIPTION "trap to be sent when a power supply returned to a healthy state. " ::= { mbgLtTraps 16 } mbgLtTrapNetworkDown NOTIFICATION-TYPE STATUS current DESCRIPTION "trap to be sent when a monitored network port is down. " ::= { mbgLtTraps 17 } mbgLtTrapNetworkUp NOTIFICATION-TYPE STATUS current DESCRIPTION "trap to be sent when a monitored network port is up. " ::= { mbgLtTraps 18 } mbgLtTrapSecondaryRecNotResp NOTIFICATION-TYPE STATUS current DESCRIPTION "trap to be sent when secondary receiver is not responding " ::= { mbgLtTraps 19 } mbgLtTrapXmrLimitExceeded NOTIFICATION-TYPE STATUS current DESCRIPTION "trap to be sent when a reference offset exceeds the configured limit" ::= { mbgLtTraps 30 } mbgLtTrapXmrRefDisconnect NOTIFICATION-TYPE STATUS current DESCRIPTION "trap to be sent when a reference signal has been lost" ::= { mbgLtTraps 31 } mbgLtTrapXmrRefReconnect NOTIFICATION-TYPE STATUS current DESCRIPTION "trap to be sent when a reference signal recovered" ::= { mbgLtTraps 32 } mbgLtTrapFdmError NOTIFICATION-TYPE STATUS current DESCRIPTION "trap to be sent when the Fdm module generates an alarm " ::= { mbgLtTraps 33 } mbgLtTrapSHSTimeLimitWarning NOTIFICATION-TYPE STATUS current DESCRIPTION "trap to be sent when SHS warning limit exceeded " ::= { mbgLtTraps 34 } mbgLtTrapSecondaryRecSync NOTIFICATION-TYPE STATUS current DESCRIPTION "trap to be sent when secondary receiver is synchronised " ::= { mbgLtTraps 35 } mbgLtTrapNTPSync NOTIFICATION-TYPE STATUS current DESCRIPTION "trap to be sent when NTP is synchronised " ::= { mbgLtTraps 36 } mbgLtTrapPtpPortDisconnected NOTIFICATION-TYPE STATUS current DESCRIPTION "trap to be sent when PTP network port got disconnected" ::= { mbgLtTraps 37 } mbgLtTrapPtpPortConnected NOTIFICATION-TYPE STATUS current DESCRIPTION "trap to be sent when PTP network port got connected" ::= { mbgLtTraps 38 } mbgLtTrapPtpStateChanged NOTIFICATION-TYPE STATUS current DESCRIPTION "trap to be sent when PTP state changed (e.g. from 'passive' to 'master')" ::= { mbgLtTraps 39 } mbgLtTrapPtpError NOTIFICATION-TYPE STATUS current DESCRIPTION "trap to be sent when PTP raised an error" ::= { mbgLtTraps 40 } mbgLtTrapNormalOperation NOTIFICATION-TYPE STATUS current DESCRIPTION "trap to be sent when the system returned to a healthy state " ::= { mbgLtTraps 77 } mbgLtTrapHeartbeat NOTIFICATION-TYPE STATUS current DESCRIPTION "trap to be sent periodically to indicate that time server is still alive " ::= { mbgLtTraps 88 } mbgLtTrapTestNotification NOTIFICATION-TYPE STATUS current DESCRIPTION "trap to be sent when a test notification has been requested " ::= { mbgLtTraps 99 } mbgLtTrapMessage OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "used as a payload object for all traps, holds a clear text event message" DEFVAL { "no event" } ::= { mbgLtTraps 100 } -- -- Meinberg Lantime CFG MIB objects for agent module -- mbgLtCfg OBJECT IDENTIFIER ::= { mbgLantime 4 } -- -- Network parameters -- mbgLtCfgNetwork OBJECT IDENTIFIER ::= { mbgLtCfg 1 } mbgLtCfgHostname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The hostname configured for this LANTIME" ::= { mbgLtCfgNetwork 1 } mbgLtCfgDomainname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The domainname configured for this LANTIME" ::= { mbgLtCfgNetwork 2 } mbgLtCfgNameserver1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The first nameserver used by this LANTIME" ::= { mbgLtCfgNetwork 3 } mbgLtCfgNameserver2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The second nameserver used this LANTIME" ::= { mbgLtCfgNetwork 4 } mbgLtCfgSyslogserver1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The first syslog server we are sending log entries to" ::= { mbgLtCfgNetwork 5 } mbgLtCfgSyslogserver2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The second syslog server we are sending log entries to" ::= { mbgLtCfgNetwork 6 } mbgLtCfgTelnetAccess OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is telnet administration enabled" --- "1 = true, 2 = false" ::= { mbgLtCfgNetwork 7 } mbgLtCfgFTPAccess OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is FTP administration enabled" --- "1 = true, 2 = false" ::= { mbgLtCfgNetwork 8 } mbgLtCfgHTTPAccess OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is web based administration enabled" --- "1 = true, 2 = false" ::= { mbgLtCfgNetwork 9 } mbgLtCfgHTTPSAccess OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is secure web based administration enabled" --- "1 = true, 2 = false" ::= { mbgLtCfgNetwork 10 } mbgLtCfgSNMPAccess OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is SNMP administration enabled" --- "1 = true, 2 = false" ::= { mbgLtCfgNetwork 11 } mbgLtCfgSambaAccess OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is Samba administration enabled" --- "1 = true, 2 = false" ::= { mbgLtCfgNetwork 12 } mbgLtCfgIPv6Access OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is IPv6 support enabled" --- "1 = true, 2 = false" ::= { mbgLtCfgNetwork 13 } mbgLtCfgSSHAccess OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is SSH administration enabled" --- "1 = true, 2 = false" ::= { mbgLtCfgNetwork 14 } -- -- NTP parameters -- mbgLtCfgNTP OBJECT IDENTIFIER ::= { mbgLtCfg 2 } mbgLtCfgNTPServer1 OBJECT IDENTIFIER ::= { mbgLtCfgNTP 1 } mbgLtCfgNTPServer2 OBJECT IDENTIFIER ::= { mbgLtCfgNTP 2 } mbgLtCfgNTPServer3 OBJECT IDENTIFIER ::= { mbgLtCfgNTP 3 } mbgLtCfgNTPServer4 OBJECT IDENTIFIER ::= { mbgLtCfgNTP 4 } mbgLtCfgNTPServer5 OBJECT IDENTIFIER ::= { mbgLtCfgNTP 5 } mbgLtCfgNTPServer6 OBJECT IDENTIFIER ::= { mbgLtCfgNTP 6 } mbgLtCfgNTPServer7 OBJECT IDENTIFIER ::= { mbgLtCfgNTP 7 } mbgLtCfgNTPServer1IP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "IP address for external NTP server" ::= { mbgLtCfgNTPServer1 1 } mbgLtCfgNTPServer1Key OBJECT-TYPE SYNTAX Integer32 (-2147483648..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Key for external NTP server" ::= { mbgLtCfgNTPServer1 2 } mbgLtCfgNTPServer1Autokey OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is autokey enabled for the external NTP server" --- "1 = true, 2 = false" ::= { mbgLtCfgNTPServer1 3 } mbgLtCfgNTPServer1Prefer OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is the preferred flag enabled for the external NTP server" --- "1 = true, 2 = false" ::= { mbgLtCfgNTPServer1 4 } mbgLtCfgNTPServer2IP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "IP address for external NTP server" ::= { mbgLtCfgNTPServer2 1 } mbgLtCfgNTPServer2Key OBJECT-TYPE SYNTAX Integer32 (-2147483648..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Key for external NTP server" ::= { mbgLtCfgNTPServer2 2 } mbgLtCfgNTPServer2Autokey OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is autokey enabled for the external NTP server" --- "1 = true, 2 = false" ::= { mbgLtCfgNTPServer2 3 } mbgLtCfgNTPServer2Prefer OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is the preferred flag enabled for the external NTP server" --- "1 = true, 2 = false" ::= { mbgLtCfgNTPServer2 4 } mbgLtCfgNTPServer3IP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "IP address for external NTP server" ::= { mbgLtCfgNTPServer3 1 } mbgLtCfgNTPServer3Key OBJECT-TYPE SYNTAX Integer32 (-2147483648..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Key for external NTP server" ::= { mbgLtCfgNTPServer3 2 } mbgLtCfgNTPServer3Autokey OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is autokey enabled for the external NTP server" --- "1 = true, 2 = false" ::= { mbgLtCfgNTPServer3 3 } mbgLtCfgNTPServer3Prefer OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is the preferred flag enabled for the external NTP server" --- "1 = true, 2 = false" ::= { mbgLtCfgNTPServer3 4 } mbgLtCfgNTPServer4IP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "IP address for external NTP server" ::= { mbgLtCfgNTPServer4 1 } mbgLtCfgNTPServer4Key OBJECT-TYPE SYNTAX Integer32 (-2147483648..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Key for external NTP server" ::= { mbgLtCfgNTPServer4 2 } mbgLtCfgNTPServer4Autokey OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is autokey enabled for the external NTP server" --- "1 = true, 2 = false" ::= { mbgLtCfgNTPServer4 3 } mbgLtCfgNTPServer4Prefer OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is the preferred flag enabled for the external NTP server" --- "1 = true, 2 = false" ::= { mbgLtCfgNTPServer4 4 } mbgLtCfgNTPServer5IP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "IP address for external NTP server" ::= { mbgLtCfgNTPServer5 1 } mbgLtCfgNTPServer5Key OBJECT-TYPE SYNTAX Integer32 (-2147483648..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Key for external NTP server" ::= { mbgLtCfgNTPServer5 2 } mbgLtCfgNTPServer5Autokey OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is autokey enabled for the external NTP server" --- "1 = true, 2 = false" ::= { mbgLtCfgNTPServer5 3 } mbgLtCfgNTPServer5Prefer OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is the preferred flag enabled for the external NTP server" --- "1 = true, 2 = false" ::= { mbgLtCfgNTPServer5 4 } mbgLtCfgNTPServer6IP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "IP address for external NTP server" ::= { mbgLtCfgNTPServer6 1 } mbgLtCfgNTPServer6Key OBJECT-TYPE SYNTAX Integer32 (-2147483648..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Key for external NTP server" ::= { mbgLtCfgNTPServer6 2 } mbgLtCfgNTPServer6Autokey OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is autokey enabled for the external NTP server" --- "1 = true, 2 = false" ::= { mbgLtCfgNTPServer6 3 } mbgLtCfgNTPServer6Prefer OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is the preferred flag enabled for the external NTP server" --- "1 = true, 2 = false" ::= { mbgLtCfgNTPServer6 4 } mbgLtCfgNTPServer7IP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "IP address for external NTP server" ::= { mbgLtCfgNTPServer7 1 } mbgLtCfgNTPServer7Key OBJECT-TYPE SYNTAX Integer32 (-2147483648..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Key for external NTP server" ::= { mbgLtCfgNTPServer7 2 } mbgLtCfgNTPServer7Autokey OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is autokey enabled for the external NTP server" --- "1 = true, 2 = false" ::= { mbgLtCfgNTPServer7 3 } mbgLtCfgNTPServer7Prefer OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is the preferred flag enabled for the external NTP server" --- "1 = true, 2 = false" ::= { mbgLtCfgNTPServer7 4 } mbgLtCfgNTPStratumLocalClock OBJECT-TYPE SYNTAX Integer32 (0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "The stratum value assigned to the local clock of the timeserver" ::= { mbgLtCfgNTP 8 } mbgLtCfgNTPTrustedKey OBJECT-TYPE SYNTAX Integer32 (-2147483648..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The key used for the internal refclock of the timeserver" ::= { mbgLtCfgNTP 9 } mbgLtCfgNTPBroadcastIP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "NTP broadcast IP address" ::= { mbgLtCfgNTP 10 } mbgLtCfgNTPBroadcastKey OBJECT-TYPE SYNTAX Integer32 (-2147483648..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Key used for NTP broadcasts" ::= { mbgLtCfgNTP 11 } mbgLtCfgNTPBroadcastAutokey OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is autokey generation used for NTP broadcasts" ::= { mbgLtCfgNTP 12 } mbgLtCfgNTPAutokeyFeature OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is the NTP autokey feature enabled" --- "1 = true, 2 = false" ::= { mbgLtCfgNTP 13 } mbgLtCfgNTPAtomPPS OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is the NTP atom pps feature enabled" --- "1 = true, 2 = false" ::= { mbgLtCfgNTP 14 } -- -- EMail parameters -- mbgLtCfgEMail OBJECT IDENTIFIER ::= { mbgLtCfg 3 } mbgLtCfgEMailTo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "EMail address to send alerts etc. to (receiving address)" ::= { mbgLtCfgEMail 1 } mbgLtCfgEMailFrom OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "EMail address to send alerts etc. from (sending address)" ::= { mbgLtCfgEMail 2 } mbgLtCfgEMailSmarthost OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "SMTP smarthost used to send mail" ::= { mbgLtCfgEMail 3 } -- -- SNMP parameters -- mbgLtCfgSNMP OBJECT IDENTIFIER ::= { mbgLtCfg 4 } mbgLtCfgSNMPTrapReceiver1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "First SNMP trap receiver host" ::= { mbgLtCfgSNMP 1 } mbgLtCfgSNMPTrapReceiver2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Second SNMP trap receiver host" ::= { mbgLtCfgSNMP 2 } mbgLtCfgSNMPTrapRec1Community OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "First SNMP trap receiver community" ::= { mbgLtCfgSNMP 3 } mbgLtCfgSNMPTrapRec2Community OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Second SNMP trap receiver community" ::= { mbgLtCfgSNMP 4 } mbgLtCfgSNMPReadOnlyCommunity OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP community string for read-only access" ::= { mbgLtCfgSNMP 5 } mbgLtCfgSNMPReadWriteCommunity OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP community string for read-write access" ::= { mbgLtCfgSNMP 6 } mbgLtCfgSNMPContact OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP contact string for Lantime" ::= { mbgLtCfgSNMP 7 } mbgLtCfgSNMPLocation OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP location string for Lantime" ::= { mbgLtCfgSNMP 8 } -- -- Winpopup parameters -- mbgLtCfgWinpopup OBJECT IDENTIFIER ::= { mbgLtCfg 5 } mbgLtCfgWMailAddress1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "First windows popup alert receiver" ::= { mbgLtCfgWinpopup 1 } mbgLtCfgWMailAddress2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Second windows popup alert receiver" ::= { mbgLtCfgWinpopup 2 } -- -- Wallmount display parameters -- mbgLtCfgWalldisplay OBJECT IDENTIFIER ::= { mbgLtCfg 6 } mbgLtCfgVP100Display1IP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of first VP100 wall display" ::= { mbgLtCfgWalldisplay 1 } mbgLtCfgVP100Display1SN OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Serial number of first VP100 wall display" ::= { mbgLtCfgWalldisplay 2 } mbgLtCfgVP100Display2IP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of second VP100 wall display" ::= { mbgLtCfgWalldisplay 3 } mbgLtCfgVP100Display2SN OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Serial number of second VP100 wall display" ::= { mbgLtCfgWalldisplay 4 } -- -- Notify parameters -- mbgLtCfgNotify OBJECT IDENTIFIER ::= { mbgLtCfg 7 } mbgLtCfgNotifyNTPNotSync OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Which alerts are sent in case of a NTP_not_sync event" --- possible strings: --- "email (sending an e-mail)" --- "wmail (sending a win popup message)" --- "snmp (sending a SNMP trap)" --- "disp (showing an alert on wall display)" --- "or a comma separated combination of these" --- "An empty string disables notification for this event." --- "Example: wmail,email (sending a win popup and e-mail message)" ::= { mbgLtCfgNotify 1 } mbgLtCfgNotifyNTPStopped OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Which alerts are sent in case of a NTP_stopped event" --- possible strings: --- "email (sending an e-mail)" --- "wmail (sending a win popup message)" --- "snmp (sending a SNMP trap)" --- "disp (showing an alert on wall display)" --- "or a comma separated combination of these" --- "An empty string disables notification for this event." --- "Example: wmail,email (sending a win popup and e-mail message)" ::= { mbgLtCfgNotify 2 } mbgLtCfgNotifyServerBoot OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Which alerts are sent in case of a server_boot event" --- possible strings: --- "email (sending an e-mail)" --- "wmail (sending a win popup message)" --- "snmp (sending a SNMP trap)" --- "disp (showing an alert on wall display)" --- "or a comma separated combination of these" --- "An empty string disables notification for this event." --- "Example: wmail,email (sending a win popup and e-mail message)" ::= { mbgLtCfgNotify 3 } mbgLtCfgNotifyRefclkNoResponse OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Which alerts are sent in case of a refclock_not_responding event" --- possible strings: --- "email (sending an e-mail)" --- "wmail (sending a win popup message)" --- "snmp (sending a SNMP trap)" --- "disp (showing an alert on wall display)" --- "or a comma separated combination of these" --- "An empty string disables notification for this event." --- "Example: wmail,email (sending a win popup and e-mail message)" ::= { mbgLtCfgNotify 4 } mbgLtCfgNotifyRefclockNotSync OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Which alerts are sent in case of a refclock_not_sync event" --- possible strings: --- "email (sending an e-mail)" --- "wmail (sending a win popup message)" --- "snmp (sending a SNMP trap)" --- "disp (showing an alert on wall display)" --- "or a comma separated combination of these" --- "An empty string disables notification for this event." --- "Example: wmail,email (sending a win popup and e-mail message)" ::= { mbgLtCfgNotify 5 } mbgLtCfgNotifyAntennaFaulty OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Which alerts are sent in case of an antenna_faulty event" --- possible strings: --- "email (sending an e-mail)" --- "wmail (sending a win popup message)" --- "snmp (sending a SNMP trap)" --- "disp (showing an alert on wall display)" --- "or a comma separated combination of these" --- "An empty string disables notification for this event." --- "Example: wmail,email (sending a win popup and e-mail message)" ::= { mbgLtCfgNotify 6 } mbgLtCfgNotifyAntennaReconnect OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Which alerts are sent in case of an antenna_reconnect event" --- possible strings: --- "email (sending an e-mail)" --- "wmail (sending a win popup message)" --- "snmp (sending a SNMP trap)" --- "disp (showing an alert on wall display)" --- "or a comma separated combination of these" --- "An empty string disables notification for this event." --- "Example: wmail,email (sending a win popup and e-mail message)" ::= { mbgLtCfgNotify 7 } mbgLtCfgNotifyConfigChanged OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Which alerts are sent in case of a config_changed event" --- possible strings: --- "email (sending an e-mail)" --- "wmail (sending a win popup message)" --- "snmp (sending a SNMP trap)" --- "disp (showing an alert on wall display)" --- "or a comma separated combination of these" --- "An empty string disables notification for this event." --- "Example: wmail,email (sending a win popup and e-mail message)" ::= { mbgLtCfgNotify 8 } mbgLtCfgNotifySHSTimeLimitError OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Which alerts are sent in case of a SHS_timelimiterror event" --- possible strings: --- "email (sending an e-mail)" --- "wmail (sending a win popup message)" --- "snmp (sending a SNMP trap)" --- "disp (showing an alert on wall display)" --- "or a comma separated combination of these." --- "An empty string disables notification for this event." --- "Example: wmail,email (sending a win popup and e-mail message)" ::= { mbgLtCfgNotify 9 } mbgLtCfgNotifyLeapSecond OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Which alerts are sent in case of a Leap_Second_Announced event" --- possible strings: --- "email (sending an e-mail)" --- "wmail (sending a win popup message)" --- "snmp (sending a SNMP trap)" --- "disp (showing an alert on wall display)" --- "or a comma separated combination of these." --- "An empty string disables notification for this event." --- "Example: wmail,email (sending a win popup and e-mail message)" ::= { mbgLtCfgNotify 10 } -- -- Ethernet parameters -- mbgLtCfgEthernet OBJECT IDENTIFIER ::= { mbgLtCfg 8 } mbgLtCfgEthernetIf0 OBJECT IDENTIFIER ::= { mbgLtCfgEthernet 0 } mbgLtCfgEthernetIf1 OBJECT IDENTIFIER ::= { mbgLtCfgEthernet 1 } mbgLtCfgEthernetIf2 OBJECT IDENTIFIER ::= { mbgLtCfgEthernet 2 } mbgLtCfgEthernetIf3 OBJECT IDENTIFIER ::= { mbgLtCfgEthernet 3 } mbgLtCfgEthernetIf4 OBJECT IDENTIFIER ::= { mbgLtCfgEthernet 4 } mbgLtCfgEthernetIf5 OBJECT IDENTIFIER ::= { mbgLtCfgEthernet 5 } mbgLtCfgEthernetIf6 OBJECT IDENTIFIER ::= { mbgLtCfgEthernet 6 } mbgLtCfgEthernetIf7 OBJECT IDENTIFIER ::= { mbgLtCfgEthernet 7 } mbgLtCfgEthernetIf8 OBJECT IDENTIFIER ::= { mbgLtCfgEthernet 8 } mbgLtCfgEthernetIf9 OBJECT IDENTIFIER ::= { mbgLtCfgEthernet 9 } mbgLtCfgEthernetIf0IPv4IP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 address of the first ethernet interface" ::= { mbgLtCfgEthernetIf0 1 } mbgLtCfgEthernetIf0IPv4Netmask OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 netmask of the first ethernet interface" ::= { mbgLtCfgEthernetIf0 2 } mbgLtCfgEthernetIf0IPv4Gateway OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 gateway address of the first ethernet interface" ::= { mbgLtCfgEthernetIf0 3 } mbgLtCfgEthernetIf0DHCPClient OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is DHCP used to get IP parameters for this interface" --- "1 = true, 2 = false" ::= { mbgLtCfgEthernetIf0 4 } mbgLtCfgEthernetIf0IPv6IP1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The first IPv6 address of the first ethernet interface" ::= { mbgLtCfgEthernetIf0 5 } mbgLtCfgEthernetIf0IPv6IP2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The second IPv6 address of the first ethernet interface" ::= { mbgLtCfgEthernetIf0 6 } mbgLtCfgEthernetIf0IPv6IP3 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The third IPv6 address of the first ethernet interface" ::= { mbgLtCfgEthernetIf0 7 } mbgLtCfgEthernetIf0IPv6Autoconf OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is IPv6 Autoconf used for this interface" --- "1 = true, 2 = false" ::= { mbgLtCfgEthernetIf0 8 } mbgLtCfgEthernetIf0NetLinkMode OBJECT-TYPE SYNTAX INTEGER { autosensing(0), link10half(1), link10full(2), link100half(3), link100full(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Link mode for this interface" ::= { mbgLtCfgEthernetIf0 9 } mbgLtCfgEthernetIf1IPv4IP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 address of the second ethernet interface" ::= { mbgLtCfgEthernetIf1 1 } mbgLtCfgEthernetIf1IPv4Netmask OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 netmask of the second ethernet interface" ::= { mbgLtCfgEthernetIf1 2 } mbgLtCfgEthernetIf1IPv4Gateway OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 gateway address of the second ethernet interface" ::= { mbgLtCfgEthernetIf1 3 } mbgLtCfgEthernetIf1DHCPClient OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is DHCP used to get IP parameters for this interface" --- "1 = true, 2 = false" ::= { mbgLtCfgEthernetIf1 4 } mbgLtCfgEthernetIf1IPv6IP1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The first IPv6 address of the second ethernet interface" ::= { mbgLtCfgEthernetIf1 5 } mbgLtCfgEthernetIf1IPv6IP2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The second IPv6 address of the second ethernet interface" ::= { mbgLtCfgEthernetIf1 6 } mbgLtCfgEthernetIf1IPv6IP3 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The third IPv6 address of the second ethernet interface" ::= { mbgLtCfgEthernetIf1 7 } mbgLtCfgEthernetIf1IPv6Autoconf OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is IPv6 Autoconf used for this interface" --- "1 = true, 2 = false" ::= { mbgLtCfgEthernetIf1 8 } mbgLtCfgEthernetIf1NetLinkMode OBJECT-TYPE SYNTAX INTEGER { autosensing(0), link10half(1), link10full(2), link100half(3), link100full(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Link mode for this interface" ::= { mbgLtCfgEthernetIf1 9 } mbgLtCfgEthernetIf2IPv4IP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 address of the third ethernet interface" ::= { mbgLtCfgEthernetIf2 1 } mbgLtCfgEthernetIf2IPv4Netmask OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 netmask of the third ethernet interface" ::= { mbgLtCfgEthernetIf2 2 } mbgLtCfgEthernetIf2IPv4Gateway OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 gateway address of the third ethernet interface" ::= { mbgLtCfgEthernetIf2 3 } mbgLtCfgEthernetIf2DHCPClient OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is DHCP used to get IP parameters for this interface" --- "1 = true, 2 = false" ::= { mbgLtCfgEthernetIf2 4 } mbgLtCfgEthernetIf2IPv6IP1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The first IPv6 address of the third ethernet interface" ::= { mbgLtCfgEthernetIf2 5 } mbgLtCfgEthernetIf2IPv6IP2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The second IPv6 address of the third ethernet interface" ::= { mbgLtCfgEthernetIf2 6 } mbgLtCfgEthernetIf2IPv6IP3 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The third IPv6 address of the third ethernet interface" ::= { mbgLtCfgEthernetIf2 7 } mbgLtCfgEthernetIf2IPv6Autoconf OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is IPv6 Autoconf used for this interface" --- "1 = true, 2 = false" ::= { mbgLtCfgEthernetIf2 8 } mbgLtCfgEthernetIf2NetLinkMode OBJECT-TYPE SYNTAX INTEGER { autosensing(0), link10half(1), link10full(2), link100half(3), link100full(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Link mode for this interface" ::= { mbgLtCfgEthernetIf2 9 } mbgLtCfgEthernetIf3IPv4IP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 address of the fourth ethernet interface" ::= { mbgLtCfgEthernetIf3 1 } mbgLtCfgEthernetIf3IPv4Netmask OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 netmask of the fourth ethernet interface" ::= { mbgLtCfgEthernetIf3 2 } mbgLtCfgEthernetIf3IPv4Gateway OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 gateway address of the fourth ethernet interface" ::= { mbgLtCfgEthernetIf3 3 } mbgLtCfgEthernetIf3DHCPClient OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is DHCP used to get IP parameters for this interface" --- "1 = true, 2 = false" ::= { mbgLtCfgEthernetIf3 4 } mbgLtCfgEthernetIf3IPv6IP1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The first IPv6 address of the fourth ethernet interface" ::= { mbgLtCfgEthernetIf3 5 } mbgLtCfgEthernetIf3IPv6IP2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The second IPv6 address of the fourth ethernet interface" ::= { mbgLtCfgEthernetIf3 6 } mbgLtCfgEthernetIf3IPv6IP3 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The third IPv6 address of the fourth ethernet interface" ::= { mbgLtCfgEthernetIf3 7 } mbgLtCfgEthernetIf3IPv6Autoconf OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is IPv6 Autoconf used for this interface" --- "1 = true, 2 = false" ::= { mbgLtCfgEthernetIf3 8 } mbgLtCfgEthernetIf3NetLinkMode OBJECT-TYPE SYNTAX INTEGER { autosensing(0), link10half(1), link10full(2), link100half(3), link100full(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Link mode for this interface" ::= { mbgLtCfgEthernetIf3 9 } mbgLtCfgEthernetIf4IPv4IP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 address of the fifth ethernet interface" ::= { mbgLtCfgEthernetIf4 1 } mbgLtCfgEthernetIf4IPv4Netmask OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 netmask of the fifth ethernet interface" ::= { mbgLtCfgEthernetIf4 2 } mbgLtCfgEthernetIf4IPv4Gateway OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 gateway address of the fifth ethernet interface" ::= { mbgLtCfgEthernetIf4 3 } mbgLtCfgEthernetIf4DHCPClient OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is DHCP used to get IP parameters for this interface" --- "1 = true, 2 = false" ::= { mbgLtCfgEthernetIf4 4 } mbgLtCfgEthernetIf4IPv6IP1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The first IPv6 address of the fifth ethernet interface" ::= { mbgLtCfgEthernetIf4 5 } mbgLtCfgEthernetIf4IPv6IP2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The second IPv6 address of the fifth ethernet interface" ::= { mbgLtCfgEthernetIf4 6 } mbgLtCfgEthernetIf4IPv6IP3 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The third IPv6 address of the fifth ethernet interface" ::= { mbgLtCfgEthernetIf4 7 } mbgLtCfgEthernetIf4IPv6Autoconf OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is IPv6 Autoconf used for this interface" --- "1 = true, 2 = false" ::= { mbgLtCfgEthernetIf4 8 } mbgLtCfgEthernetIf4NetLinkMode OBJECT-TYPE SYNTAX INTEGER { autosensing(0), link10half(1), link10full(2), link100half(3), link100full(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Link mode for this interface" ::= { mbgLtCfgEthernetIf4 9 } mbgLtCfgEthernetIf5IPv4IP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 address of the sixth ethernet interface" ::= { mbgLtCfgEthernetIf5 1 } mbgLtCfgEthernetIf5IPv4Netmask OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 netmask of the sixth ethernet interface" ::= { mbgLtCfgEthernetIf5 2 } mbgLtCfgEthernetIf5IPv4Gateway OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 gateway address of the sixth ethernet interface" ::= { mbgLtCfgEthernetIf5 3 } mbgLtCfgEthernetIf5DHCPClient OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is DHCP used to get IP parameters for this interface" --- "1 = true, 2 = false" ::= { mbgLtCfgEthernetIf5 4 } mbgLtCfgEthernetIf5IPv6IP1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The first IPv6 address of the sixth ethernet interface" ::= { mbgLtCfgEthernetIf5 5 } mbgLtCfgEthernetIf5IPv6IP2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The second IPv6 address of the sixth ethernet interface" ::= { mbgLtCfgEthernetIf5 6 } mbgLtCfgEthernetIf5IPv6IP3 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The third IPv6 address of the sixth ethernet interface" ::= { mbgLtCfgEthernetIf5 7 } mbgLtCfgEthernetIf5IPv6Autoconf OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is IPv6 Autoconf used for this interface" --- "1 = true, 2 = false" ::= { mbgLtCfgEthernetIf5 8 } mbgLtCfgEthernetIf5NetLinkMode OBJECT-TYPE SYNTAX INTEGER { autosensing(0), link10half(1), link10full(2), link100half(3), link100full(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Link mode for this interface" ::= { mbgLtCfgEthernetIf5 9 } mbgLtCfgEthernetIf6IPv4IP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 address of the seventh ethernet interface" ::= { mbgLtCfgEthernetIf6 1 } mbgLtCfgEthernetIf6IPv4Netmask OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 netmask of the seventh ethernet interface" ::= { mbgLtCfgEthernetIf6 2 } mbgLtCfgEthernetIf6IPv4Gateway OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 gateway address of the seventh ethernet interface" ::= { mbgLtCfgEthernetIf6 3 } mbgLtCfgEthernetIf6DHCPClient OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is DHCP used to get IP parameters for this interface" --- "1 = true, 2 = false" ::= { mbgLtCfgEthernetIf6 4 } mbgLtCfgEthernetIf6IPv6IP1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The first IPv6 address of the seventh ethernet interface" ::= { mbgLtCfgEthernetIf6 5 } mbgLtCfgEthernetIf6IPv6IP2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The second IPv6 address of the seventh ethernet interface" ::= { mbgLtCfgEthernetIf6 6 } mbgLtCfgEthernetIf6IPv6IP3 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The third IPv6 address of the seventh ethernet interface" ::= { mbgLtCfgEthernetIf6 7 } mbgLtCfgEthernetIf6IPv6Autoconf OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is IPv6 Autoconf used for this interface" --- "1 = true, 2 = false" ::= { mbgLtCfgEthernetIf6 8 } mbgLtCfgEthernetIf6NetLinkMode OBJECT-TYPE SYNTAX INTEGER { autosensing(0), link10half(1), link10full(2), link100half(3), link100full(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Link mode for this interface" ::= { mbgLtCfgEthernetIf6 9 } mbgLtCfgEthernetIf7IPv4IP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 address of the eighth ethernet interface" ::= { mbgLtCfgEthernetIf7 1 } mbgLtCfgEthernetIf7IPv4Netmask OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 netmask of the eighth ethernet interface" ::= { mbgLtCfgEthernetIf7 2 } mbgLtCfgEthernetIf7IPv4Gateway OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 gateway address of the eighth ethernet interface" ::= { mbgLtCfgEthernetIf7 3 } mbgLtCfgEthernetIf7DHCPClient OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is DHCP used to get IP parameters for this interface" --- "1 = true, 2 = false" ::= { mbgLtCfgEthernetIf7 4 } mbgLtCfgEthernetIf7IPv6IP1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The first IPv6 address of the eighth ethernet interface" ::= { mbgLtCfgEthernetIf7 5 } mbgLtCfgEthernetIf7IPv6IP2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The second IPv6 address of the eighth ethernet interface" ::= { mbgLtCfgEthernetIf7 6 } mbgLtCfgEthernetIf7IPv6IP3 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The third IPv6 address of the eighth ethernet interface" ::= { mbgLtCfgEthernetIf7 7 } mbgLtCfgEthernetIf7IPv6Autoconf OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is IPv6 Autoconf used for this interface" --- "1 = true, 2 = false" ::= { mbgLtCfgEthernetIf7 8 } mbgLtCfgEthernetIf7NetLinkMode OBJECT-TYPE SYNTAX INTEGER { autosensing(0), link10half(1), link10full(2), link100half(3), link100full(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Link mode for this interface" ::= { mbgLtCfgEthernetIf7 9 } mbgLtCfgEthernetIf8IPv4IP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 address of the nineth ethernet interface" ::= { mbgLtCfgEthernetIf8 1 } mbgLtCfgEthernetIf8IPv4Netmask OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 netmask of the nineth ethernet interface" ::= { mbgLtCfgEthernetIf8 2 } mbgLtCfgEthernetIf8IPv4Gateway OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 gateway address of the nineth ethernet interface" ::= { mbgLtCfgEthernetIf8 3 } mbgLtCfgEthernetIf8DHCPClient OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is DHCP used to get IP parameters for this interface" --- "1 = true, 2 = false" ::= { mbgLtCfgEthernetIf8 4 } mbgLtCfgEthernetIf8IPv6IP1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The first IPv6 address of the nineth ethernet interface" ::= { mbgLtCfgEthernetIf8 5 } mbgLtCfgEthernetIf8IPv6IP2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The second IPv6 address of the nineth ethernet interface" ::= { mbgLtCfgEthernetIf8 6 } mbgLtCfgEthernetIf8IPv6IP3 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The third IPv6 address of the nineth ethernet interface" ::= { mbgLtCfgEthernetIf8 7 } mbgLtCfgEthernetIf8IPv6Autoconf OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is IPv6 Autoconf used for this interface" --- "1 = true, 2 = false" ::= { mbgLtCfgEthernetIf8 8 } mbgLtCfgEthernetIf8NetLinkMode OBJECT-TYPE SYNTAX INTEGER { autosensing(0), link10half(1), link10full(2), link100half(3), link100full(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Link mode for this interface" ::= { mbgLtCfgEthernetIf8 9 } mbgLtCfgEthernetIf9IPv4IP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 address of the tenth ethernet interface" ::= { mbgLtCfgEthernetIf9 1 } mbgLtCfgEthernetIf9IPv4Netmask OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 netmask of the tenth ethernet interface" ::= { mbgLtCfgEthernetIf9 2 } mbgLtCfgEthernetIf9IPv4Gateway OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 gateway address of the tenth ethernet interface" ::= { mbgLtCfgEthernetIf9 3 } mbgLtCfgEthernetIf9DHCPClient OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is DHCP used to get IP parameters for this interface" --- "1 = true, 2 = false" ::= { mbgLtCfgEthernetIf9 4 } mbgLtCfgEthernetIf9IPv6IP1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The first IPv6 address of the tenth ethernet interface" ::= { mbgLtCfgEthernetIf9 5 } mbgLtCfgEthernetIf9IPv6IP2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The second IPv6 address of the tenth ethernet interface" ::= { mbgLtCfgEthernetIf9 6 } mbgLtCfgEthernetIf9IPv6IP3 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The third IPv6 address of the tenth ethernet interface" ::= { mbgLtCfgEthernetIf9 7 } mbgLtCfgEthernetIf9IPv6Autoconf OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Is IPv6 Autoconf used for this interface" --- "1 = true, 2 = false" ::= { mbgLtCfgEthernetIf9 8 } mbgLtCfgEthernetIf9NetLinkMode OBJECT-TYPE SYNTAX INTEGER { autosensing(0), link10half(1), link10full(2), link100half(3), link100full(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Link mode for this interface" ::= { mbgLtCfgEthernetIf9 9 } -- -- SHS specific parameters -- mbgLtCfgSHS OBJECT IDENTIFIER ::= { mbgLtCfg 9 } mbgLtCfgSHSCritLimit OBJECT-TYPE SYNTAX Integer32 (-2147483648..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Max. number of milliseconds the two SHS references can differ before a SHS Critical Timelimit error is issued" ::= { mbgLtCfgSHS 1 } mbgLtCfgSHSWarnLimit OBJECT-TYPE SYNTAX Integer32 (-2147483648..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Max. number of milliseconds the two SHS references can differ before a SHS Warning Timelimit error is issued" ::= { mbgLtCfgSHS 2 } -- -- MRS specific parameters -- mbgLtCfgMRS OBJECT IDENTIFIER ::= { mbgLtCfg 10 } mbgLtCfgMRSRefPriority OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Priority of MRS Reference Sources, as a comma-separated list" --- Example: "gps,irig,ntp" --- Possible reference sources are: ::= { mbgLtCfgMRS 1 } -- -- Lantime SNMP commands -- mbgLtCmd OBJECT IDENTIFIER ::= { mbgLantime 5 } mbgLtCmdExecute OBJECT-TYPE SYNTAX INTEGER { ready(0), doReboot(1), doFirmwareUpdate (2), doReloadConfig (3), doGenerateSSHKey (4), doGenerateHTTPSKey (5), doResetFactoryDefaults (6), doGenerateNewNTPAutokeyCert (7), doSendTestNotification (8), doResetSHSTimeLimitError (9) } MAX-ACCESS read-write STATUS current DESCRIPTION "Send a command to the timeserver to be executed" ::={ mbgLtCmd 1 } mbgLtCmdSetRefTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Set the time of the reference clock and the LANTIME itself" -- The new time has to be specified in UTC time and -- can be either written as a valid ISO8601 date and time string -- e.g. 2006-08-23 16:05:30 (=08/23/2006, 4:05:30pm) -- or a simple number representing the number of seconds -- since 01/01/1970 ::={ mbgLtCmd 2 } mbgLtPtp OBJECT IDENTIFIER ::= { mbgLantime 10 } mbgLtPtpMode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Display current PTPv2 modus as string" ::= { mbgLtPtp 1 } mbgLtPtpModeVal OBJECT-TYPE SYNTAX INTEGER { stopped (0), master (1), slave (2), ordinary (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Display current PTPv2 modus as integer" ::= { mbgLtPtp 2 } mbgLtPtpPortState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current PTPv2 port state as string" ::= { mbgLtPtp 3 } mbgLtPtpPortStateVal OBJECT-TYPE SYNTAX INTEGER { uncalibrated (0), initializing (1), listening (2), master (3), slave (4), unicastmaster (5), unicastslave (6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current PTPv2 port state as integer" ::= { mbgLtPtp 4 } mbgLtPtpOffsetFromGM OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current PTPv2 offset from grandmaster as string" ::= { mbgLtPtp 5 } mbgLtPtpOffsetFromGMVal OBJECT-TYPE SYNTAX Integer32 (-2147483648..2147483647) UNITS "ns" MAX-ACCESS read-only STATUS current DESCRIPTION "Current PTPv2 offset from grandmaster in nanoseconds" ::= { mbgLtPtp 6 } mbgLtPtpDelay OBJECT-TYPE SYNTAX DisplayString UNITS "ns" MAX-ACCESS read-only STATUS current DESCRIPTION "shows the current network delay in nanoseconds as string" ::= { mbgLtPtp 7 } mbgLtPtpDelayVal OBJECT-TYPE SYNTAX Integer32 (-2147483648..2147483647) UNITS "ns" MAX-ACCESS read-only STATUS current DESCRIPTION "shows the current network delay in nanoseconds" ::= { mbgLtPtp 8 } -- -- FDM Powerline Frequency Deviation Monitor Module -- mbgLtFdm OBJECT IDENTIFIER ::= { mbgLantime 11 } mbgLtFdmPlFreq OBJECT-TYPE SYNTAX Integer32 (-2147483648..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "shows the current powerline frequency in mHz as an Integer32 value" ::= { mbgLtFdm 1 } mbgLtFdmFreqDev OBJECT-TYPE SYNTAX Integer32 (-2147483648..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "shows the current frequency deviation in mHz as an Integer32 value" ::= { mbgLtFdm 2 } mbgLtFdmNomFreq OBJECT-TYPE SYNTAX Integer32 (-2147483648..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "shows the nominal frequency in mHz as an Integer32 value" -- can be 50000 (50Hz) or 60000 (60Hz) ::= { mbgLtFdm 3 } mbgLtConformance OBJECT IDENTIFIER ::= { mbgLantime 90 } mbgLtCompliances OBJECT IDENTIFIER ::= { mbgLtConformance 1 } mbgLtGroups OBJECT IDENTIFIER ::= { mbgLtConformance 2 } mbgLtCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which implement version 2 of the LANTIME MIB" MODULE -- this module MANDATORY-GROUPS { mbgLtObjectsGroup, mbgLtTrapsGroup } ::= { mbgLtCompliances 1 } mbgLtObjectsGroup OBJECT-GROUP OBJECTS { mbgLtFirmwareVersion, mbgLtFirmwareVersionVal, mbgLtNtpCurrentState, mbgLtNtpCurrentStateVal, mbgLtNtpStratum, mbgLtNtpActiveRefclockId, mbgLtNtpActiveRefclockName, mbgLtNtpActiveRefclockOffset, mbgLtNtpActiveRefclockOffsetVal, mbgLtNtpNumberOfRefclocks, mbgLtNtpAuthKeyId, mbgLtNtpVersion, mbgLtRefClockType, mbgLtRefClockTypeVal, mbgLtRefClockMode, mbgLtRefClockModeVal, mbgLtRefGpsState, mbgLtRefGpsStateVal, mbgLtRefGpsPosition, mbgLtRefGpsSatellites, mbgLtRefGpsSatellitesGood, mbgLtRefGpsSatellitesInView, mbgLtRefPzfState, mbgLtRefPzfStateVal, mbgLtRefPzfKorrelation, mbgLtRefPzfField, mbgLtRefGpsMode, mbgLtRefGpsModeVal, mbgLtRefIrigMode, mbgLtRefIrigModeVal, mbgLtRefPzfMode, mbgLtRefPzfModeVal, mbgLtRefIrigState, mbgLtRefIrigStateVal, mbgLtRefSHSMode, mbgLtRefSHSModeVal, mbgLtRefSHSTimeDiff, mbgLtRefDctState, mbgLtRefDctStateVal, mbgLtRefDctField, mbgLtRefDctMode, mbgLtRefDctModeVal, mbgLtRefGpsLeapSecond, mbgLtRefGpsLeapCorrection, mbgLtRefMrsRef, mbgLtRefMrsRefVal, mbgLtRefMrsRefList, mbgLtRefMrsPrioList, mbgLtMrsGpsOffs, mbgLtMrsGpsOffsVal, mbgLtMrsGpsOffsBase, mbgLtMrsGpsPrio, mbgLtMrsGpsState, mbgLtMrsGpsStateVal, mbgLtMrsGpsPrecision, mbgLtMrsIrigOffs, mbgLtMrsIrigOffsVal, mbgLtMrsIrigOffsBase, mbgLtMrsIrigPrio, mbgLtMrsIrigState, mbgLtMrsIrigStateVal, mbgLtMrsIrigCorr, mbgLtMrsIrigOffsLimit, mbgLtMrsIrigPrecision, mbgLtMrsPpsOffs, mbgLtMrsPpsOffsVal, mbgLtMrsPpsOffsBase, mbgLtMrsPpsPrio, mbgLtMrsPpsState, mbgLtMrsPpsStateVal, mbgLtMrsPpsCorr, mbgLtMrsPpsOffsLimit, mbgLtMrsPpsPrecision, mbgLtMrsFreqOffs, mbgLtMrsFreqOffsVal, mbgLtMrsFreqOffsBase, mbgLtMrsFreqPrio, mbgLtMrsFreqState, mbgLtMrsFreqStateVal, mbgLtMrsFreqCorr, mbgLtMrsFreqOffsLimit, mbgLtMrsFreqPrecision, mbgLtMrsPtpOffs, mbgLtMrsPtpOffsVal, mbgLtMrsPtpOffsBase, mbgLtMrsPtpPrio, mbgLtMrsPtpState, mbgLtMrsPtpStateVal, mbgLtMrsPtpCorr, mbgLtMrsPtpOffsLimit, mbgLtMrsPtpPrecision, mbgLtMrsNtpOffs, mbgLtMrsNtpOffsVal, mbgLtMrsNtpOffsBase, mbgLtMrsNtpPrio, mbgLtMrsNtpState, mbgLtMrsNtpStateVal, mbgLtMrsNtpCorr, mbgLtMrsNtpOffsLimit, mbgLtMrsNtpPrecision, mbgLtTrapMessage, mbgLtCfgHostname, mbgLtCfgDomainname, mbgLtCfgNameserver1, mbgLtCfgNameserver2, mbgLtCfgSyslogserver1, mbgLtCfgSyslogserver2, mbgLtCfgTelnetAccess, mbgLtCfgFTPAccess, mbgLtCfgHTTPAccess, mbgLtCfgHTTPSAccess, mbgLtCfgSNMPAccess, mbgLtCfgSambaAccess, mbgLtCfgIPv6Access, mbgLtCfgSSHAccess, mbgLtCfgNTPServer1IP, mbgLtCfgNTPServer1Key, mbgLtCfgNTPServer1Autokey, mbgLtCfgNTPServer1Prefer, mbgLtCfgNTPServer2IP, mbgLtCfgNTPServer2Key, mbgLtCfgNTPServer2Autokey, mbgLtCfgNTPServer2Prefer, mbgLtCfgNTPServer3IP, mbgLtCfgNTPServer3Key, mbgLtCfgNTPServer3Autokey, mbgLtCfgNTPServer3Prefer, mbgLtCfgNTPServer4IP, mbgLtCfgNTPServer4Key, mbgLtCfgNTPServer4Autokey, mbgLtCfgNTPServer4Prefer, mbgLtCfgNTPServer5IP, mbgLtCfgNTPServer5Key, mbgLtCfgNTPServer5Autokey, mbgLtCfgNTPServer5Prefer, mbgLtCfgNTPServer6IP, mbgLtCfgNTPServer6Key, mbgLtCfgNTPServer6Autokey, mbgLtCfgNTPServer6Prefer, mbgLtCfgNTPServer7IP, mbgLtCfgNTPServer7Key, mbgLtCfgNTPServer7Autokey, mbgLtCfgNTPServer7Prefer, mbgLtCfgNTPStratumLocalClock, mbgLtCfgNTPTrustedKey, mbgLtCfgNTPBroadcastIP, mbgLtCfgNTPBroadcastKey, mbgLtCfgNTPBroadcastAutokey, mbgLtCfgNTPAutokeyFeature, mbgLtCfgNTPAtomPPS, mbgLtCfgEMailTo, mbgLtCfgEMailFrom, mbgLtCfgEMailSmarthost, mbgLtCfgSNMPTrapReceiver1, mbgLtCfgSNMPTrapReceiver2, mbgLtCfgSNMPTrapRec1Community, mbgLtCfgSNMPTrapRec2Community, mbgLtCfgSNMPReadOnlyCommunity, mbgLtCfgSNMPReadWriteCommunity, mbgLtCfgSNMPContact, mbgLtCfgSNMPLocation, mbgLtCfgWMailAddress1, mbgLtCfgWMailAddress2, mbgLtCfgVP100Display1IP, mbgLtCfgVP100Display1SN, mbgLtCfgVP100Display2IP, mbgLtCfgVP100Display2SN, mbgLtCfgNotifyNTPNotSync, mbgLtCfgNotifyNTPStopped, mbgLtCfgNotifyServerBoot, mbgLtCfgNotifyRefclkNoResponse, mbgLtCfgNotifyRefclockNotSync, mbgLtCfgNotifyAntennaFaulty, mbgLtCfgNotifyAntennaReconnect, mbgLtCfgNotifyConfigChanged, mbgLtCfgNotifySHSTimeLimitError, mbgLtCfgNotifyLeapSecond, mbgLtCfgEthernetIf0IPv4IP, mbgLtCfgEthernetIf0IPv4Netmask, mbgLtCfgEthernetIf0IPv4Gateway, mbgLtCfgEthernetIf0DHCPClient, mbgLtCfgEthernetIf0IPv6IP1, mbgLtCfgEthernetIf0IPv6IP2, mbgLtCfgEthernetIf0IPv6IP3, mbgLtCfgEthernetIf0IPv6Autoconf, mbgLtCfgEthernetIf0NetLinkMode, mbgLtCfgEthernetIf1IPv4IP, mbgLtCfgEthernetIf1IPv4Netmask, mbgLtCfgEthernetIf1IPv4Gateway, mbgLtCfgEthernetIf1DHCPClient, mbgLtCfgEthernetIf1IPv6IP1, mbgLtCfgEthernetIf1IPv6IP2, mbgLtCfgEthernetIf1IPv6IP3, mbgLtCfgEthernetIf1IPv6Autoconf, mbgLtCfgEthernetIf1NetLinkMode, mbgLtCfgEthernetIf2IPv4IP, mbgLtCfgEthernetIf2IPv4Netmask, mbgLtCfgEthernetIf2IPv4Gateway, mbgLtCfgEthernetIf2DHCPClient, mbgLtCfgEthernetIf2IPv6IP1, mbgLtCfgEthernetIf2IPv6IP2, mbgLtCfgEthernetIf2IPv6IP3, mbgLtCfgEthernetIf2IPv6Autoconf, mbgLtCfgEthernetIf2NetLinkMode, mbgLtCfgEthernetIf3IPv4IP, mbgLtCfgEthernetIf3IPv4Netmask, mbgLtCfgEthernetIf3IPv4Gateway, mbgLtCfgEthernetIf3DHCPClient, mbgLtCfgEthernetIf3IPv6IP1, mbgLtCfgEthernetIf3IPv6IP2, mbgLtCfgEthernetIf3IPv6IP3, mbgLtCfgEthernetIf3IPv6Autoconf, mbgLtCfgEthernetIf3NetLinkMode, mbgLtCfgEthernetIf4IPv4IP, mbgLtCfgEthernetIf4IPv4Netmask, mbgLtCfgEthernetIf4IPv4Gateway, mbgLtCfgEthernetIf4DHCPClient, mbgLtCfgEthernetIf4IPv6IP1, mbgLtCfgEthernetIf4IPv6IP2, mbgLtCfgEthernetIf4IPv6IP3, mbgLtCfgEthernetIf4IPv6Autoconf, mbgLtCfgEthernetIf4NetLinkMode, mbgLtCfgEthernetIf5IPv4IP, mbgLtCfgEthernetIf5IPv4Netmask, mbgLtCfgEthernetIf5IPv4Gateway, mbgLtCfgEthernetIf5DHCPClient, mbgLtCfgEthernetIf5IPv6IP1, mbgLtCfgEthernetIf5IPv6IP2, mbgLtCfgEthernetIf5IPv6IP3, mbgLtCfgEthernetIf5IPv6Autoconf, mbgLtCfgEthernetIf5NetLinkMode, mbgLtCfgEthernetIf6IPv4IP, mbgLtCfgEthernetIf6IPv4Netmask, mbgLtCfgEthernetIf6IPv4Gateway, mbgLtCfgEthernetIf6DHCPClient, mbgLtCfgEthernetIf6IPv6IP1, mbgLtCfgEthernetIf6IPv6IP2, mbgLtCfgEthernetIf6IPv6IP3, mbgLtCfgEthernetIf6IPv6Autoconf, mbgLtCfgEthernetIf6NetLinkMode, mbgLtCfgEthernetIf7IPv4IP, mbgLtCfgEthernetIf7IPv4Netmask, mbgLtCfgEthernetIf7IPv4Gateway, mbgLtCfgEthernetIf7DHCPClient, mbgLtCfgEthernetIf7IPv6IP1, mbgLtCfgEthernetIf7IPv6IP2, mbgLtCfgEthernetIf7IPv6IP3, mbgLtCfgEthernetIf7IPv6Autoconf, mbgLtCfgEthernetIf7NetLinkMode, mbgLtCfgEthernetIf8IPv4IP, mbgLtCfgEthernetIf8IPv4Netmask, mbgLtCfgEthernetIf8IPv4Gateway, mbgLtCfgEthernetIf8DHCPClient, mbgLtCfgEthernetIf8IPv6IP1, mbgLtCfgEthernetIf8IPv6IP2, mbgLtCfgEthernetIf8IPv6IP3, mbgLtCfgEthernetIf8IPv6Autoconf, mbgLtCfgEthernetIf8NetLinkMode, mbgLtCfgEthernetIf9IPv4IP, mbgLtCfgEthernetIf9IPv4Netmask, mbgLtCfgEthernetIf9IPv4Gateway, mbgLtCfgEthernetIf9DHCPClient, mbgLtCfgEthernetIf9IPv6IP1, mbgLtCfgEthernetIf9IPv6IP2, mbgLtCfgEthernetIf9IPv6IP3, mbgLtCfgEthernetIf9IPv6Autoconf, mbgLtCfgEthernetIf9NetLinkMode, mbgLtCfgSHSCritLimit, mbgLtCfgSHSWarnLimit, mbgLtCfgMRSRefPriority, mbgLtCmdExecute, mbgLtCmdSetRefTime, mbgLtFdmPlFreq, mbgLtFdmFreqDev, mbgLtFdmNomFreq, mbgLtPtpMode, mbgLtPtpModeVal, mbgLtPtpPortState, mbgLtPtpPortStateVal, mbgLtPtpOffsetFromGM, mbgLtPtpOffsetFromGMVal, mbgLtPtpDelay, mbgLtPtpDelayVal } STATUS current DESCRIPTION "The collection of objects for the LANTIME MIB" ::= { mbgLtGroups 1 } mbgLtTrapsGroup NOTIFICATION-GROUP NOTIFICATIONS { mbgLtTrapNTPNotSync, mbgLtTrapNTPStopped, mbgLtTrapServerBoot, mbgLtTrapReceiverNotResponding, mbgLtTrapReceiverNotSync, mbgLtTrapAntennaFaulty, mbgLtTrapAntennaReconnect, mbgLtTrapConfigChanged, mbgLtTrapLeapSecondAnnounced, mbgLtTrapSHSTimeLimitError, mbgLtTrapSecondaryRecNotSync, mbgLtTrapPowerSupplyFailure, mbgLtTrapAntennaShortCircuit, mbgLtTrapReceiverSync, mbgLtTrapNTPClientAlarm, mbgLtTrapPowerSupplyUp, mbgLtTrapNetworkDown, mbgLtTrapNetworkUp, mbgLtTrapSecondaryRecNotResp, mbgLtTrapXmrLimitExceeded, mbgLtTrapXmrRefDisconnect, mbgLtTrapXmrRefReconnect, mbgLtTrapFdmError, mbgLtTrapSHSTimeLimitWarning, mbgLtTrapSecondaryRecSync, mbgLtTrapNTPSync, mbgLtTrapNormalOperation, mbgLtTrapHeartbeat, mbgLtTrapTestNotification, mbgLtTrapPtpPortDisconnected, mbgLtTrapPtpPortConnected, mbgLtTrapPtpStateChanged, mbgLtTrapPtpError } STATUS current DESCRIPTION "The collection of traps for the LANTIME MIB" ::= { mbgLtGroups 2 } END