-- Copyright 1995 by 3Com Corporation. All rights reserved. -- MIB file name: lanplex-opt-fddi-mib -- available in these 3Com devices: Lanplex hubs -- For support or more info, check 3Com's web page at http://www.3com.com -- Lanplex Optional FDDI MIB for SMT 7 -- Version 1.1.2 -- Apr 27, 1994 -- 3Com Corporation -- 85 Rangeway Road -- North Billerica, MA 01862 -- (508) 670-9009 -- Change History: -- 4/27/94 eah Added fddimibSMTCFState and fddimibSMTPeerWrapFlag -- to the lpOptSMTPeerWrapCondition -- Changed upstream duplicate address object from -- fddimibMACSMTAddress to fddimibMACUpstreamNbr, and -- added fddimibMACDaFlag and fddimibMACUnaDaFlag to -- the lpOptMACDuplicateAddressCondition -- Added fddimibMACNotCopiedFlag to the -- lpOptMACNotCopiedCondition -- Added fddimibPORTLerFlag to the lpOptPORTLerCondition -- 4/11/94 eah Changed IMPORTS so that lanplex is imported from -- LANPLEX-MIB-1-2-9 -- 6/15/93 eah Changed IMPORTS and traps to use new Version 3.2 -- of draft fddi mib -- 6/11/93 eah Corrected path so that lanplexOptFddi is under -- lanplex 10, not synernetics 10 LANPLEX-OPT-FDDI-MIB-1-1-2 DEFINITIONS ::= BEGIN IMPORTS enterprises, Counter FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215 FddiTimeNano, FddiSMTStationIdType, fddimibSMTStationId, fddimibSMTCFState, fddimibSMTPeerWrapFlag, fddimibMACSMTAddress, fddimibMACDaFlag, fddimibMACUnaDaFlag, fddimibMACFrameErrorFlag, fddimibMACFrameCts, fddimibMACErrorCts, fddimibMACLostCts, fddimibMACFrameErrorRatio, fddimibMACNotCopiedCts, fddimibMACCopiedCts, fddimibMACNotCopiedRatio, fddimibMACNotCopiedFlag, fddimibMACUpstreamNbr, fddimibMACOldUpstreamNbr, fddimibMACDownstreamNbr, fddimibMACOldDownstreamNbr, fddimibMACCurrentPath, fddimibMACAvailablePaths, fddimibMACRequestedPaths, fddimibPORTLerCutoff, fddimibPORTLerAlarm, fddimibPORTLerEstimate, fddimibPORTLemRejectCts, fddimibPORTLemCts, fddimibPORTLerFlag, fddimibPORTMyType, fddimibPORTConnectState, fddimibPORTNeighborType, fddimibPORTPCWithhold, fddimibPORTAvailablePaths, fddimibPORTCurrentPath, fddimibPORTRequestedPaths FROM DRAFT-FDDI-MIB-VER-3-2; synernetics OBJECT IDENTIFIER ::= { enterprises 114 } lanplex OBJECT IDENTIFIER ::= { synernetics 1 } lanplexOptFddi OBJECT IDENTIFIER ::= { lanplex 10 } -- groups lpOptSMT OBJECT IDENTIFIER ::= { lanplexOptFddi 1 } lpOptMAC OBJECT IDENTIFIER ::= { lanplexOptFddi 2 } lpOptPATH OBJECT IDENTIFIER ::= { lanplexOptFddi 3 } lpOptPORT OBJECT IDENTIFIER ::= { lanplexOptFddi 4 } -- the lpOptSMT group -- the lpOptSMTTable lpOptSMTTable OBJECT-TYPE SYNTAX SEQUENCE OF LpOptSMTEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of optional SMT entries. The number of entries shall not exceed the value of snmpFddiSMTNumber." ::= { lpOptSMT 1 } lpOptSMTEntry OBJECT-TYPE SYNTAX LpOptSMTEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An optional SMT entry containing information common to a given optional SMT." INDEX { lpOptSMTIndex } ::= { lpOptSMTTable 1 } LpOptSMTEntry ::= SEQUENCE { lpOptSMTIndex INTEGER, lpOptSMTManufacturerOUI OCTET STRING, lpOptSMTManufacturerData OCTET STRING, lpOptSMTHoldState INTEGER, lpOptSMTSetCount INTEGER, lpOptSMTLastSetStationId FddiSMTStationIdType } lpOptSMTIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization." ::= { lpOptSMTEntry 1 } lpOptSMTManufacturerOUI OBJECT-TYPE SYNTAX OCTET STRING (SIZE (3)) ACCESS read-only STATUS mandatory DESCRIPTION "The three octets of manufacturer data which make up the manufacturerOUI component." REFERENCE "ANSI { fddiSMT 16 }" ::= { lpOptSMTEntry 2 } lpOptSMTManufacturerData OBJECT-TYPE SYNTAX OCTET STRING (SIZE (29)) ACCESS read-only STATUS mandatory DESCRIPTION "The 29 octets of manufacturer data which make up the manufacturerData component." REFERENCE "ANSI { fddiSMT 16 }" ::= { lpOptSMTEntry 3 } lpOptSMTHoldState OBJECT-TYPE SYNTAX INTEGER { not-implemented(1), -- holding not implemented not-holding(2), holding-prm(3), -- holding on primary holding-sec(4) -- holding on secondary } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the current state of the Hold function. The value 'not-holding' is the default and initial value. The value must be set to 'not-holding' as part of Active_Actions and when the conditions causing 'holding-prm' or 'holding-sec' are no longer true. The value 'holding-prm' must be set when the condition (notTR_Flag & not RE_Flag & (PC_LS=QLS | LEM_Fail | TNE>NS_Max | (not LS_Flag & TPC > T_Out))) is satisfied in state PC8:ACTIVE for the A Port. The value 'holding-sec' must be set when the condition (notTR_Flag & not RE_Flag & (PC_LS=QLS | LEM_Fail | TNE>NS_Max | (not LS_Flag & TPC > T_Out))) is satisfied in state PC8:ACTIVE for the B Port." REFERENCE "ANSI { fddiSMT 43 }" ::= { lpOptSMTEntry 4 } lpOptSMTSetCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This variable is composed of a count incremented in response to a Set operation on the MIB, and the time of the change, however only the count is reported here (refer to ANSI SMT 8.4.1)." REFERENCE "ANSI { fddiSMT 53 }" ::= { lpOptSMTEntry 5 } lpOptSMTLastSetStationId OBJECT-TYPE SYNTAX FddiSMTStationIdType ACCESS read-only STATUS mandatory DESCRIPTION "The Station ID of the station that effected the last change in the FDDI MIB." REFERENCE "ANSI { fddiSMT 54 }" ::= { lpOptSMTEntry 6 } -- the lpOptMAC group -- the lpOptMACBridgeFunctionTable lpOptMACBridgeFunctionTable OBJECT-TYPE SYNTAX SEQUENCE OF LpOptMACBridgeFunctionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of MAC bridge function entries." ::= { lpOptMAC 1 } lpOptMACBridgeFunctionEntry OBJECT-TYPE SYNTAX LpOptMACBridgeFunctionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Bridge function information for a given MAC within a given SMT." INDEX { lpOptMACBridgeFunctionSMTIndex, lpOptMACBridgeFunctionMACIndex } ::= { lpOptMACBridgeFunctionTable 1 } LpOptMACBridgeFunctionEntry ::= SEQUENCE { lpOptMACBridgeFunctionSMTIndex INTEGER, lpOptMACBridgeFunctionMACIndex INTEGER, lpOptMACBridgeFunctions INTEGER } lpOptMACBridgeFunctionSMTIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization." ::= { lpOptMACBridgeFunctionEntry 1 } lpOptMACBridgeFunctionMACIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Index variable for uniquely identifying the MAC object instances." REFERENCE "ANSI { fddiMAC 34 }" ::= { lpOptMACBridgeFunctionEntry 2 } lpOptMACBridgeFunctions OBJECT-TYPE SYNTAX INTEGER (-1..7) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the MAC's optional bridging functions. The Value -1 is used to indicate that bridging is not supported by this MAC. The value is a sum. This value initially takes the value zero, then for each function present, 2 raised to a power is added to the sum. The powers are according to the following table: Function Power tb 0 -- Transparent bridging active sr 1 -- Src routing active srt 2 -- Src routing transparent active " REFERENCE "ANSI { fddiMAC 12 }" ::= { lpOptMACBridgeFunctionEntry 3 } -- the lpOptMACTPriTable lpOptMACTPriTable OBJECT-TYPE SYNTAX SEQUENCE OF LpOptMACTPriEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of MAC T-Pri entries." ::= { lpOptMAC 2 } lpOptMACTPriEntry OBJECT-TYPE SYNTAX LpOptMACTPriEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A collection of T-Pri information for a given MAC within a given SMT." INDEX { lpOptMACTPriSMTIndex, lpOptMACTPriMACIndex } ::= { lpOptMACTPriTable 1 } LpOptMACTPriEntry ::= SEQUENCE { lpOptMACTPriSMTIndex INTEGER, lpOptMACTPriMACIndex INTEGER, lpOptMACTPri0 FddiTimeNano, lpOptMACTPri1 FddiTimeNano, lpOptMACTPri2 FddiTimeNano, lpOptMACTPri3 FddiTimeNano, lpOptMACTPri4 FddiTimeNano, lpOptMACTPri5 FddiTimeNano, lpOptMACTPri6 FddiTimeNano } lpOptMACTPriSMTIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization." ::= { lpOptMACTPriEntry 1 } lpOptMACTPriMACIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Index variable for uniquely identifying the MAC object instances." REFERENCE "ANSI { fddiMAC 34 }" ::= { lpOptMACTPriEntry 2 } lpOptMACTPri0 OBJECT-TYPE SYNTAX FddiTimeNano ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units." REFERENCE "ANSI { fddiMAC 56 }" ::= { lpOptMACTPriEntry 3 } lpOptMACTPri1 OBJECT-TYPE SYNTAX FddiTimeNano ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units." REFERENCE "ANSI { fddiMAC 57 }" ::= { lpOptMACTPriEntry 4 } lpOptMACTPri2 OBJECT-TYPE SYNTAX FddiTimeNano ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units." REFERENCE "ANSI { fddiMAC 58 }" ::= { lpOptMACTPriEntry 5 } lpOptMACTPri3 OBJECT-TYPE SYNTAX FddiTimeNano ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units." REFERENCE "ANSI { fddiMAC 59 }" ::= { lpOptMACTPriEntry 6 } lpOptMACTPri4 OBJECT-TYPE SYNTAX FddiTimeNano ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units." REFERENCE "ANSI { fddiMAC 60 }" ::= { lpOptMACTPriEntry 7 } lpOptMACTPri5 OBJECT-TYPE SYNTAX FddiTimeNano ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units." REFERENCE "ANSI { fddiMAC 61 }" ::= { lpOptMACTPriEntry 8 } lpOptMACTPri6 OBJECT-TYPE SYNTAX FddiTimeNano ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units." REFERENCE "ANSI { fddiMAC 62 }" ::= { lpOptMACTPriEntry 9 } -- the lpOptPATH group -- the lpOptPATHRingTable lpOptPATHRingTable OBJECT-TYPE SYNTAX SEQUENCE OF LpOptPATHRingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of PATH ring entries." ::= { lpOptPATH 1 } lpOptPATHRingEntry OBJECT-TYPE SYNTAX LpOptPATHRingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Ring latency, trace status, and T-Rmode information for a given PATH within a given SMT." INDEX { lpOptPATHRingSMTIndex, lpOptPATHRingPATHIndex } ::= { lpOptPATHRingTable 1 } LpOptPATHRingEntry ::= SEQUENCE { lpOptPATHRingSMTIndex INTEGER, lpOptPATHRingPATHIndex INTEGER, lpOptPATHRingLatency FddiTimeNano, lpOptPATHTraceStatus INTEGER, lpOptPATHT-Rmode FddiTimeNano } lpOptPATHRingSMTIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization." ::= { lpOptPATHRingEntry 1 } lpOptPATHRingPATHIndex OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-only STATUS mandatory DESCRIPTION "Index variable for uniquely identifying the primary, secondary and local PATH object instances. Local PATH object instances are represented with integer values 3 to 255." REFERENCE "ANSI { fddiPATH 11 }" ::= { lpOptPATHRingEntry 2 } lpOptPATHRingLatency OBJECT-TYPE SYNTAX FddiTimeNano ACCESS read-write STATUS mandatory DESCRIPTION "Gives the total accumulated latency of the ring associated with this path. May be measured directly by the station or calculated by a management station. Values of this object are reported in 1 ns units." REFERENCE "ANSI { fddiPATH 13 }" ::= { lpOptPATHRingEntry 3 } lpOptPATHTraceStatus OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the current trace status of the path. The value is a sum which represents all of the trace status information which applies. This value initially takes the value zero, then for each condition which applies, 2 raised to a power is added to the sum. the powers are according to the following table: TraceStatus Power traceinitiated 0 tracepropragated 1 traceterminated 2 tracetimeout 3" REFERENCE "ANSI { fddiPATH 14 }" ::= { lpOptPATHRingEntry 4 } lpOptPATHT-Rmode OBJECT-TYPE SYNTAX FddiTimeNano ACCESS read-write STATUS mandatory DESCRIPTION "Used by RMT to limit the duration of restricted dialogs on a path. This object is reported in 1 ns units." REFERENCE "ANSI { fddiPATH 19 }" ::= { lpOptPATHRingEntry 5 } -- the lpOptPATHSbaTable lpOptPATHSbaTable OBJECT-TYPE SYNTAX SEQUENCE OF LpOptPATHSbaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of PATH Sba entries." ::= { lpOptPATH 2 } lpOptPATHSbaEntry OBJECT-TYPE SYNTAX LpOptPATHSbaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Sba information for a given PATH within a given SMT." INDEX { lpOptPATHSbaSMTIndex, lpOptPATHSbaPATHIndex } ::= { lpOptPATHSbaTable 1 } LpOptPATHSbaEntry ::= SEQUENCE { lpOptPATHSbaSMTIndex INTEGER, lpOptPATHSbaPATHIndex INTEGER, lpOptPATHSbaPayload INTEGER, lpOptPATHSbaOverhead INTEGER, lpOptPATHSbaAvailable INTEGER } lpOptPATHSbaSMTIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization." ::= { lpOptPATHSbaEntry 1 } lpOptPATHSbaPATHIndex OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-only STATUS mandatory DESCRIPTION "Index variable for uniquely identifying the primary, secondary and local PATH object instances. Local PATH object instances are represented with integer values 3 to 255." REFERENCE "ANSI { fddiPATH 11 }" ::= { lpOptPATHSbaEntry 2 } lpOptPATHSbaPayload OBJECT-TYPE SYNTAX INTEGER (0..1562) ACCESS read-write STATUS mandatory DESCRIPTION "The payload portion of the Synchronous Bandwidth Allocation for thi path. This value represents the maximum number of bytes of data allocated for transmission per 125 microseconds." REFERENCE "ANSI { fddiPATH 15 }" ::= { lpOptPATHSbaEntry 3 } lpOptPATHSbaOverhead OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The overhead portion of the Synchronous Bandwith Allocation for this path. This value repersents the maximum number of bytes overhead (token capture, frame header, etc.) used pre negotiated Target Token Rotation Time (T_neg)." REFERENCE "ANSI { fddiPATH 16 }" ::= { lpOptPATHSbaEntry 4 } lpOptPATHSbaAvailable OBJECT-TYPE SYNTAX INTEGER (0..12500000) ACCESS read-write STATUS mandatory DESCRIPTION "This value is the maximum Synchronous Bandwith available for a path in bytes per second." REFERENCE "ANSI { fddiPATH 20 }" ::= { lpOptPATHSbaEntry 5 } -- the lpOptPORT group -- the lpOptPORTTable lpOptPORTTable OBJECT-TYPE SYNTAX SEQUENCE OF LpOptPORTEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of optional PORT entries." ::= { lpOptPORT 1 } lpOptPORTEntry OBJECT-TYPE SYNTAX LpOptPORTEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "MAC loop time and EB error count information for a given PORT within a given SMT." INDEX { lpOptPORTSMTIndex, lpOptPORTIndex } ::= { lpOptPORTTable 1 } LpOptPORTEntry ::= SEQUENCE { lpOptPORTSMTIndex INTEGER, lpOptPORTIndex INTEGER, lpOptPORTMACLoopTime FddiTimeNano, lpOptPORTEBErrorCt Counter } lpOptPORTSMTIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization." ::= { lpOptPORTEntry 1 } lpOptPORTIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Index variable for uniquely identifying the PORT object instances." REFERENCE "ANSI { fddiPORT 29 }" ::= { lpOptPORTEntry 2 } lpOptPORTMACLoopTime OBJECT-TYPE SYNTAX FddiTimeNano ACCESS read-write STATUS mandatory DESCRIPTION "This attribute controls the value used for T_Next(9) (see 9.4.4.2.3). This object is reported in 1 ns units." REFERENCE "ANSI { fddiPORT 21 }" ::= { lpOptPORTEntry 3 } lpOptPORTEBErrorCt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count that should as closely as possible match the times an Elasticity Buffer Error has occurred while in active line state." REFERENCE "ANSI { fddiPORT 41 }" ::= { lpOptPORTEntry 4 } -- the lpOptPORTLSTable lpOptPORTLSTable OBJECT-TYPE SYNTAX SEQUENCE OF LpOptPORTLSEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of optional PORT line state entries." ::= { lpOptPORT 2 } lpOptPORTLSEntry OBJECT-TYPE SYNTAX LpOptPORTLSEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Maintenance line state and PC line state information for a given PORT within a given SMT." INDEX { lpOptPORTLSSMTIndex, lpOptPORTLSPORTIndex } ::= { lpOptPORTLSTable 1 } LpOptPORTLSEntry ::= SEQUENCE { lpOptPORTLSSMTIndex INTEGER, lpOptPORTLSPORTIndex INTEGER, lpOptPORTMaintLS INTEGER, lpOptPORTPCLS INTEGER } lpOptPORTLSSMTIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization." ::= { lpOptPORTLSEntry 1 } lpOptPORTLSPORTIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Index variable for uniquely identifying the PORT object instances." REFERENCE "ANSI { fddiPORT 29 }" ::= { lpOptPORTLSEntry 2 } lpOptPORTMaintLS OBJECT-TYPE SYNTAX INTEGER { quiet(1), idle(2), master(3), halt(4), receive-active(5), receive-unknown(6), receive-noise(7) } ACCESS read-write STATUS mandatory DESCRIPTION "The PORT Maintenance Line State specifies the line state (Maint_LS) to be transmitted when the PCM state machine for the port is in state PC9 Maint." REFERENCE "ANSI { fddiPORT 31 }" ::= { lpOptPORTLSEntry 3 } lpOptPORTPCLS OBJECT-TYPE SYNTAX INTEGER { quiet(1), idle(2), master(3), halt(4), receive-active(5), receive-unknown(6), receive-noise(7) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the line state (PC_LS) received by the port." REFERENCE "ANSI { fddiPORT 34 }" ::= { lpOptPORTLSEntry 4 } -- traps -- SMT events lpOptSMTHoldCondition TRAP-TYPE ENTERPRISE lanplexOptFddi VARIABLES { fddimibSMTStationId, lpOptSMTHoldState } DESCRIPTION "Generated when fddiSMTHoldState (fddimibSMTHoldState) assumes the state holding-prm or holding-sec. This notification is a Condition in the Status Report Protocol (see 7.2.7 and 8.3)." REFERENCE "ANSI { fddiSMT 71 }" ::= 1 lpOptSMTPeerWrapCondition TRAP-TYPE ENTERPRISE lanplexOptFddi VARIABLES { fddimibSMTStationId, fddimibSMTCFState, fddimibSMTPeerWrapFlag } DESCRIPTION "This condition is active when fddiSMTPeerWrapFlag (fddimibSMTPeerWrapFlag) is set. This notification is a Condition in the Status Report Protocol (see 7.2.7 and 8.3)." REFERENCE "ANSI { fddiSMT 72 }" ::= 2 -- MAC events lpOptMACDuplicateAddressCondition TRAP-TYPE ENTERPRISE lanplexOptFddi VARIABLES { fddimibSMTStationId, fddimibMACSMTAddress, fddimibMACUpstreamNbr, fddimibMACDaFlag, fddimibMACUnaDaFlag } DESCRIPTION "This condition is active when either fddiMACDA-Flag (fddimibMACDaFlag) or fddiMACUNDA-Flag (fddimibMACUnaDaFlag) is set. This event is handled as a Condition in the Status Report Protocol (see 7.2.7 and 8.3)." REFERENCE "ANSI { fddiMAC 140 }" ::= 3 lpOptMACFrameErrorCondition TRAP-TYPE ENTERPRISE lanplexOptFddi VARIABLES { fddimibSMTStationId, fddimibMACFrameErrorFlag, fddimibMACFrameCts, fddimibMACErrorCts, fddimibMACLostCts, fddimibMACFrameErrorRatio } DESCRIPTION "Generated when the fddiMACFrameErrorRatio (fddimibMACFrameErrorRatio) is greater than or equal to fddiMACFrameErrorThreshold (fddimibMACFrameErrorThreshold). This event is handled as a Condition in the Status Report Protocol (see 7.2.7 and 8.3)." REFERENCE "ANSI { fddiMAC 141 }" ::= 4 lpOptMACNotCopiedCondition TRAP-TYPE ENTERPRISE lanplexOptFddi VARIABLES { fddimibSMTStationId, fddimibMACNotCopiedCts, fddimibMACCopiedCts, fddimibMACNotCopiedRatio, fddimibMACNotCopiedFlag } DESCRIPTION "Generated when the fddiMACNotCopiedRatio (fddimibMACNotCopiedRatio) is greater than or equal to the fddiMACNotCopiedThreshold (lpOptMACNotCopiedThreshold). This event is handled as a Condition in the Status Report Protocol (see 7.2.7 and 8.3)." REFERENCE "ANSI { fddiMAC 142 }" ::= 5 lpOptMACNeighborChangeEvent TRAP-TYPE ENTERPRISE lanplexOptFddi VARIABLES { fddimibSMTStationId, fddimibMACUpstreamNbr, fddimibMACOldUpstreamNbr, fddimibMACDownstreamNbr, fddimibMACOldDownstreamNbr, fddimibMACCurrentPath, fddimibMACSMTAddress } DESCRIPTION "Generated when a change in a MAC's upstream neighbor address or downstream neighbor address is detected. (see 7.2.7 and 8.3)." REFERENCE "ANSI { fddiMAC 143 }" ::= 6 lpOptMACPathChangeEvent TRAP-TYPE ENTERPRISE lanplexOptFddi VARIABLES { fddimibSMTStationId, fddimibMACAvailablePaths, fddimibMACCurrentPath, fddimibMACRequestedPaths } DESCRIPTION "This event is generated when the value of the fddiMACCurrentPath (fddimibMACCurrentPath) changes. This event shall be supressed if the value changes from isolated to local or local to isolated (see 7.2.7 and 8.3)." REFERENCE "ANSI { fddiMAC 144 }" ::= 7 -- PORT events lpOptPORTLerCondition TRAP-TYPE ENTERPRISE lanplexOptFddi VARIABLES { fddimibSMTStationId, fddimibPORTLerCutoff, fddimibPORTLerAlarm, fddimibPORTLerEstimate, fddimibPORTLemRejectCts, fddimibPORTLemCts, fddimibPORTLerFlag } DESCRIPTION "This condition becomes active when the value of fddiPORTLer-Estimate (fddimibPORTLerEstimate) is less than or equal to fddiPORTLer-Alarm (fddimibPORTLerAlarm). This will be reported with the Status Report Frames (SRF) (see 7.2.7 and 8.3)." REFERENCE "ANSI { fddiPORT 80 }" ::= 8 lpOptPORTUndesiredConnAttemptEvent TRAP-TYPE ENTERPRISE lanplexOptFddi VARIABLES { fddimibSMTStationId, fddimibPORTMyType, fddimibPORTConnectState, fddimibPORTNeighborType, fddimibPORTPCWithhold } DESCRIPTION "Generated when an undesired connection attempt has been made (see 5.2.4, 7.2.7, and 8.3)." REFERENCE "ANSI { fddiPORT 81 }" ::= 9 lpOptPORTEBErrorCondition TRAP-TYPE ENTERPRISE lanplexOptFddi VARIABLES { fddimibSMTStationId, lpOptPORTEBErrorCt } DESCRIPTION "Generated when the Elasticity Buffer Error-Ct (lpOptPORTEBErrorCt) increments. This is handled as a condition in the Status Report Protocol. It is generated when an increment occurs in the station's sampling period (see 7.2.7 and 8.3)." REFERENCE "ANSI { fddiPORT 82 }" ::= 10 lpOptPORTPathChangeEvent TRAP-TYPE ENTERPRISE lanplexOptFddi VARIABLES { fddimibSMTStationId, fddimibPORTAvailablePaths, fddimibPORTCurrentPath, fddimibPORTRequestedPaths, fddimibPORTMyType, fddimibPORTNeighborType } DESCRIPTION "This event is generated when the value of the fddiPORTCurrentPath (lpOptPORTCurrentPath) changes. This event shall be surpressed if the value changes from isolated to local or local to isolated (see 7.2.7 and 8.3)." REFERENCE "ANSI { fddiPORT 83 }" ::= 11 END