-- ***************************************************************** -- L A N O P T I C S - H U B - M I B . m y -- -- March 1996, Keith Horil -- -- Copyright (c) 1996 by cisco Systems, Inc. -- All rights reserved. -- ***************************************************************** -- -- This mib was developed by LanOptics LANOPTICS-HUB-MIB DEFINITIONS ::= BEGIN -- MIB II Extension Definitions for hub management IMPORTS OBJECT-TYPE FROM RFC-1212 enterprises FROM RFC1155-SMI DisplayString FROM RFC1213-MIB; BITMAP ::= INTEGER -- bitwise info represented by a single integer lanOptics OBJECT IDENTIFIER ::= { enterprises 224 } lanOpticsHub OBJECT IDENTIFIER ::= { lanOptics 1 } snMaxSlots OBJECT-TYPE SYNTAX INTEGER (1..16) ACCESS read-only STATUS mandatory DESCRIPTION "The limit on the total number of slots that the Hub chassis has." ::= { lanOpticsHub 1 } snSlotsNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The actual number of slots occupied by the Hub modules ." ::= { lanOpticsHub 2 } snConfig OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A list of all modules occupying slots in Hub in accordance with snSlotsNum." ::= { lanOpticsHub 3 } snLLActiveNMS OBJECT-TYPE SYNTAX INTEGER { -- inactive (0), active (1) } ACCESS read-write STATUS mandatory DESCRIPTION "States whether the NMS-431X is active (1) or inactive (0). For internal use only. Should not be modified." ::= { lanOpticsHub 4 } snReset OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Resets the management module of the Hub." ::= { lanOpticsHub 5 } snInternalID OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The internal address of the management module (NMS-431X)." ::= { lanOpticsHub 6 } snDirtyBit OBJECT-TYPE SYNTAX BITMAP ACCESS read-only STATUS mandatory DESCRIPTION "Low level description in bits for changes made in the system." ::= { lanOpticsHub 7 } snSlotsTable OBJECT-TYPE SYNTAX SEQUENCE OF SnSlotsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of slots entries. The number of entries is given by the value of snSlotsNum." ::= { lanOpticsHub 8 } snSlotsEntry OBJECT-TYPE SYNTAX SnSlotsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A slot entry containing a high and low level description of the module in the slot." --INDEX { INTEGER } ::= { snSlotsTable 1 } SnSlotsEntry ::= SEQUENCE { snCardName DisplayString, snCardDescr DisplayString, snLLHwRevision INTEGER, snLLSwRevision INTEGER, snLLControl0 BITMAP, snLLControl1 BITMAP, snPollInf OCTET STRING, snResetSlot INTEGER, snPollInfCode OCTET STRING, snAssCode OCTET STRING } snCardName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Description of the card (module) name and type (IOM,LBM,BKM,NMS). It is set by Management entity . If not set by the Management entity - will response with HW,SW Rev." ::= { snSlotsEntry 1 } snCardDescr OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Description of the card media, connectors and hardware.- not accesible in Low Level. In High Level will be set by the Management entity (for agents above v5.0)" ::= { snSlotsEntry 2 } snLLHwRevision OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Low level description of the module's hardware revision (module type). For internal use only!" ::= { snSlotsEntry 9 } snLLSwRevision OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Low level description of the module's software revision (module revision). For internal use only!" ::= { snSlotsEntry 10 } snLLControl0 OBJECT-TYPE SYNTAX BITMAP ACCESS read-write STATUS mandatory DESCRIPTION "Low level description of control actions on the module. Bit per port. For internal use only!" ::= { snSlotsEntry 14 } snLLControl1 OBJECT-TYPE SYNTAX BITMAP ACCESS read-write STATUS mandatory DESCRIPTION "Low level description of control actions on the module. Bit per port. For internal use only!." ::= { snSlotsEntry 15 } snPollInf OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Low level status description of this module represented by an internal structure. For internal use only." ::= { snSlotsEntry 29 } snResetSlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Reset this slot (e.g. LBM module, NMS module). If this slot is the one the Agent occupies, reset the agent (same effect as snReset variable). If this is a special slot (0xF), reset the device mapped to this slot (e.g. the router )." ::= { snSlotsEntry 38 } snPollInfCode OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This variable is set with assembly code for pollInf structure (per slot)" ::= { snSlotsEntry 41 } snAssCode OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This variable is set with assembly code that should be perform immediatly (per slot)" ::= { snSlotsEntry 42 } snPairAddress OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Low level port address." ::= { lanOpticsHub 9 } snPairData OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Low level port data. The value of this variable is read/written from/to the I/O address in snPairAddress variable." ::= { lanOpticsHub 10 } -- Hub related alerts data snHubSplitTable OBJECT-TYPE SYNTAX SEQUENCE OF SnHubSplitEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Status of each split card." ::= { lanOpticsHub 11 } snHubSplitEntry OBJECT-TYPE SYNTAX SnHubSplitEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" --INDEX { INTEGER } ::= { snHubSplitTable 1 } SnHubSplitEntry ::= SEQUENCE { snHubSplitStatus INTEGER } snHubSplitStatus OBJECT-TYPE SYNTAX INTEGER { -- normal (0), splitted (1), missing (2) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable describes the status of this split module." ::= { snHubSplitEntry 1 } snHubPSTable OBJECT-TYPE SYNTAX SEQUENCE OF SnHubPSEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Status of each Power supply." ::= { lanOpticsHub 12 } snHubPSEntry OBJECT-TYPE SYNTAX SnHubPSEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" --INDEX { INTEGER } ::= { snHubPSTable 1 } SnHubPSEntry ::= SEQUENCE { snHubPSStatus INTEGER } snHubPSStatus OBJECT-TYPE SYNTAX INTEGER { -- normal (0), malfunctioning (1), missing (2) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable describes the status of this Power Supply." ::= { snHubPSEntry 1 } snHubFanTable OBJECT-TYPE SYNTAX SEQUENCE OF SnHubFanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Status of each Fan." ::= { lanOpticsHub 13 } snHubFanEntry OBJECT-TYPE SYNTAX SnHubFanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" --INDEX { INTEGER } ::= { snHubFanTable 1 } SnHubFanEntry ::= SEQUENCE { snHubFanStatus INTEGER } snHubFanStatus OBJECT-TYPE SYNTAX INTEGER { -- normal (0), malfunctioning (1), missing (2) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable describes the status of this Fan." ::= { snHubFanEntry 1 } snHubSlotsTable OBJECT-TYPE SYNTAX SEQUENCE OF SnHubSlotsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Hub's alerts related information per slot" ::= { lanOpticsHub 14 } snHubSlotsEntry OBJECT-TYPE SYNTAX SnHubSlotsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" --INDEX { INTEGER } ::= { snHubSlotsTable 1 } SnHubSlotsEntry ::= SEQUENCE { snHubSlotConnected INTEGER, snHubSlotFreqError INTEGER, snHubSlotRevChanged INTEGER } snHubSlotConnected OBJECT-TYPE SYNTAX INTEGER { -- connected (0), disconnected (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable signifies that this entire slot was disconnected or reconnected by a management entity." ::= { snHubSlotsEntry 1 } snHubSlotFreqError OBJECT-TYPE SYNTAX INTEGER { -- no-error (0), slot-4M (4), slot-16M (16) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable signifies that this slot frequency differs from the back-plane's." ::= { snHubSlotsEntry 2 } snHubSlotRevChanged OBJECT-TYPE SYNTAX INTEGER { -- changed (0), unchanged (1) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable signifies that this slot SW revision has changed." ::= { snHubSlotsEntry 3 } snCompanionHW OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Gives the value of the Hardware and software revision that is sharing the (PC) bus with the agent, e.g, a Cisco Router PC-Card. If no hardware exists, the value should be 0xFF." ::= { lanOpticsHub 15 } snCompanionReset OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Send Reset to the companion hardware(cisco router)" ::= { lanOpticsHub 16 } snCompanionStatus OBJECT-TYPE SYNTAX BITMAP ACCESS read-only STATUS mandatory DESCRIPTION "Gives the companion status. For cisco router: Bit0 - Lan Active led(1-on,0-off) Bit2 - ISDN present bit Bit3 - O.k. Led(1-on,0-off)" ::= { lanOpticsHub 17 } snGenPortsTable OBJECT-TYPE SYNTAX SEQUENCE OF SnGenPortsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of all possible I/O ports in address range is 0xC000 - 0xFFFF" ::= { lanOpticsHub 18 } snGenPortsEntry OBJECT-TYPE SYNTAX SnGenPortsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An I/O port entry. Each byte of the I/O address is represented by one index digit; e.g, instance 255.12 is I/O address (port) 0xFF0C." --INDEX { INTEGER, INTEGER } ::= { snGenPortsTable 1 } SnGenPortsEntry ::= SEQUENCE { snPortValue BITMAP } snPortValue OBJECT-TYPE SYNTAX BITMAP ACCESS read-write STATUS mandatory DESCRIPTION "The I/O port value." ::= { snGenPortsEntry 1 } END