-- ***************************************************************************** -- Juniper-SSC-CLIENT-MIB -- -- Juniper Networks Enterprise MIB -- Service Selection Center (SSC) Client -- -- Copyright (c) 2000, 2002 Unisphere Networks, Inc. -- Copyright (c) 2002, 2003 Juniper Networks, Inc. -- All Rights Reserved. -- ***************************************************************************** Juniper-SSC-CLIENT-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress, Counter32 FROM SNMPv2-SMI DisplayString FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF JuniName FROM Juniper-TC juniMibs FROM Juniper-MIBs; juniSscClientMIB MODULE-IDENTITY LAST-UPDATED "200312181629Z" -- 18-Dec-03 11:29 AM EST ORGANIZATION "Juniper Networks, Inc." CONTACT-INFO " Juniper Networks, Inc. Postal: 10 Technology Park Drive Westford, MA 01886-3146 USA Tel: +1 978 589 5800 Email: mib@Juniper.net" DESCRIPTION "The Service Selection Center (SSC) Client MIB for the Juniper Networks enterprise." -- Revision History REVISION "200312181629Z" -- 18-Dec-03 11:29 AM EST - JUNOSe 5.3 DESCRIPTION "Obsoleted token and added discover scalar statistics." REVISION "200209162144Z" -- 16-Sep-02 05:44 PM EDT - JUNOSe 5.0 DESCRIPTION "Replaced Unisphere names with Juniper names." REVISION "200201142015Z" -- 14-Jan-02 03:15 PM EST - JUNOSe 4.0 DESCRIPTION "Added version number, local address and transport router name objects." REVISION "200101232130Z" -- 23-Jan-01 04:30 PM EST - JUNOSe 3.1 DESCRIPTION "Added DHCP-LS, Web and SSC support." REVISION "200002172310Z" -- 17-Feb-00 6:10 PM EST - JUNOSe 2.0 DESCRIPTION "Initial version of this MIB module." ::= { juniMibs 36 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Managed objects -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ juniSscClientObjects OBJECT IDENTIFIER ::= { juniSscClientMIB 1 } juniSscClientCfg OBJECT IDENTIFIER ::= { juniSscClientObjects 1 } juniSscClientStatus OBJECT IDENTIFIER ::= { juniSscClientObjects 2 } juniSscClientStatistics OBJECT IDENTIFIER ::= { juniSscClientObjects 3 } -- -- Configuration scalars -- juniSscClientCfgScalars OBJECT IDENTIFIER ::= { juniSscClientCfg 1 } juniSscClientServerSwitchoverTimeout OBJECT-TYPE SYNTAX Integer32 (5..300) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The server switchover timeout in seconds. The SSC Client begins with the primary server and proceeds rotationally to secondary, tertiary, primary, etc. as timeouts occur." ::= { juniSscClientCfgScalars 1 } juniSscClientPrimaryAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the primary SSC server. A value of 0.0.0.0 indicates the server address is unconfigured." ::= { juniSscClientCfgScalars 2 } juniSscClientPrimaryPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The TCP port number for the primary SSC server. A value of zero indicates the port is unconfigured." ::= { juniSscClientCfgScalars 3 } juniSscClientSecondaryAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the secondary SSC server. A value of 0.0.0.0 indicates the server address is unconfigured." ::= { juniSscClientCfgScalars 4 } juniSscClientSecondaryPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The TCP port number of the secondary SSC server. A value of zero indicates the port is unconfigured." ::= { juniSscClientCfgScalars 5 } juniSscClientTertiaryAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the tertiary SSC server. A value of 0.0.0.0 indicates the server address is unconfigured." ::= { juniSscClientCfgScalars 6 } juniSscClientTertiaryPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The TCP port number of the tertiary SSC server. A value of zero indicates the port is unconfigured." ::= { juniSscClientCfgScalars 7 } juniSscClientLocalAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The local IP address binding of the server connection. A value of 0.0.0.0 indicates the local address is unconfigured." ::= { juniSscClientCfgScalars 8 } juniSscClientTransportRouterName OBJECT-TYPE SYNTAX JuniName MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the router to be used as the transport for the server connection." ::= { juniSscClientCfgScalars 9 } -- -- Status objects -- juniSscClientStatusScalars OBJECT IDENTIFIER ::= { juniSscClientStatus 1 } juniSscClientConnectionState OBJECT-TYPE SYNTAX INTEGER { disconnected(0), trying(1), connected(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The connection state of the SSC Client: disconnected Not connected to a SSC server. trying Attempting a connection to a server. connected Connected to a server. When this object has the value 'connected', the active server address and TCP port are reported in juniSscClientActiveAddress and juniSscClientActivePort, respectively." ::= { juniSscClientStatusScalars 1 } juniSscClientActiveAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the SSC server currently in use. A value of 0.0.0.0 indicates no server is in use." ::= { juniSscClientStatusScalars 2 } juniSscClientActivePort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The TCP port number for the SSC server currently in use. A value of zero indicates no server is in use." ::= { juniSscClientStatusScalars 3 } juniSscClientVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The version number for the SSC server currently in use." ::= { juniSscClientStatusScalars 4 } -- -- Statistics Objects -- juniSscClientStatisticsScalars OBJECT IDENTIFIER ::= { juniSscClientStatistics 1 } juniSscClientPolicyCommandsReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of policy command packets received from the SSC." ::= { juniSscClientStatisticsScalars 1 } juniSscClientPolicyCommandsListReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of policy command packets received from the SSC with subtype LIST." ::= { juniSscClientStatisticsScalars 2 } juniSscClientPolicyCommandsAcctReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of policy command packets received from the SSC with subtype ACCOUTING." ::= { juniSscClientStatisticsScalars 3 } juniSscClientBadPolicyCommandsReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of policy command packets received from the SSC that included rules that were in error." ::= { juniSscClientStatisticsScalars 4 } juniSscClientErrorPolicyCommandsReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of policy command packets received from the SSC indicating an error from the SSC." ::= { juniSscClientStatisticsScalars 5 } juniSscClientPolicyReportsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of policy report packets sent to the SSC." ::= { juniSscClientStatisticsScalars 6 } juniSscClientConnectionOpenRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of connection open requests sent to the SSC." ::= { juniSscClientStatisticsScalars 7 } juniSscClientConnectionOpenCompletes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of connections to the SSC that open successfully." ::= { juniSscClientStatisticsScalars 8 } juniSscClientConnectionClosedSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of connection close indications that were sent to the SSC." ::= { juniSscClientStatisticsScalars 9 } juniSscClientConnectionClosedRemotely OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of connection close indications that were received from the SSC." ::= { juniSscClientStatisticsScalars 10 } juniSscClientCreateInterfacesSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of interface creation indications that were sent to the SSC. This indicates the transition of an interface to an UP state." ::= { juniSscClientStatisticsScalars 11 } juniSscClientDeleteInterfacesSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of delete interface indications that were sent to the SSC. This indicates the transition of an interface to an DOWN state." ::= { juniSscClientStatisticsScalars 12 } juniSscClientActiveIpInterfaces OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of currently active IP interfaces that the SSC Client is aware of." ::= { juniSscClientStatisticsScalars 13 } juniSscClientIpInterfaceTransitions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP interface transitions that have been tracked by the SSC Client." ::= { juniSscClientStatisticsScalars 14 } juniSscClientSynchronizesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of synchronization requests received from the SSC." ::= { juniSscClientStatisticsScalars 15 } juniSscClientSynchronizeCompletesSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of synchronization complete packets sent to the SSC." ::= { juniSscClientStatisticsScalars 16 } juniSscClientInternalErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of internal errors tracked by the SSC Client." ::= { juniSscClientStatisticsScalars 17 } juniSscClientCommunicationErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of lower layer communication errors tracked by the SSC Client." ::= { juniSscClientStatisticsScalars 18 } juniSscClientTokensSeen OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The number of tokens seen by the SSC client." ::= { juniSscClientStatisticsScalars 19 } juniSscClientActiveTokens OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The number of tokens that the SSC client is currently aware of." ::= { juniSscClientStatisticsScalars 20 } juniSscClientTokenTransitions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The number of tokens transitions that have occurred." ::= { juniSscClientStatisticsScalars 21 } juniSscClientCreateTokensSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The number of token creation indications that were sent to the SSC. This indicates the transition of a token to an UP state." ::= { juniSscClientStatisticsScalars 22 } juniSscClientDeleteTokensSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The number of delete token indications that were sent to the SSC. This indicates the transition of a token to an DOWN state." ::= { juniSscClientStatisticsScalars 23 } juniSscClientActiveAddresses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of addresses that the SSC client is currently aware of." ::= { juniSscClientStatisticsScalars 24 } juniSscClientAddressTransitions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of address transitions that have occurred." ::= { juniSscClientStatisticsScalars 25 } juniSscClientCreateAddressesSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of address creation indications that were sent to the SSC. This indicates the transition of an address to an UP state." ::= { juniSscClientStatisticsScalars 26 } juniSscClientDeleteAddressesSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of delete address indications that were sent to the SSC. This indicates the transition of an address to an DOWN state." ::= { juniSscClientStatisticsScalars 27 } juniSscClientAuthenticationSuccesses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The number of tokens which were authenticated successfully." ::= { juniSscClientStatisticsScalars 28 } juniSscClientAuthenticationFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The number of tokens which were not authenticated successfully." ::= { juniSscClientStatisticsScalars 29 } juniSscClientDiscoversSeen OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of discovers seen by the SSC client." ::= { juniSscClientStatisticsScalars 30 } juniSscClientActiveDiscovers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of discovers that the SSC client is currently aware of." ::= { juniSscClientStatisticsScalars 31 } juniSscClientDiscoverTransitions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of discover transitions that have occurred." ::= { juniSscClientStatisticsScalars 32 } juniSscClientCreateDiscoversSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of discover creation indications that were sent to the SSC." ::= { juniSscClientStatisticsScalars 33 } juniSscClientDeleteDiscoversSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of delete discover indications that were sent to the SSC." ::= { juniSscClientStatisticsScalars 34 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Notifications -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- No notifications are defined in this MIB. Placeholders follow. -- juniSscClientTrapControl OBJECT IDENTIFIER ::= { juniSscClientMIB 2 } -- juniSscClientTraps OBJECT IDENTIFIER ::= { juniSscClientMIB 3 } -- juniSscClientTrapPrefix OBJECT IDENTIFIER ::= { juniSscClientTraps 0 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Conformance information -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ juniSscClientMIBConformance OBJECT IDENTIFIER ::= { juniSscClientMIB 4 } juniSscClientMIBCompliances OBJECT IDENTIFIER ::= { juniSscClientMIBConformance 1 } juniSscClientMIBGroups OBJECT IDENTIFIER ::= { juniSscClientMIBConformance 2 } -- -- compliance statements -- juniSscClientAuthCompliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for authentication clients implementing the Juniper SSC Client MIB authentication functionality. This statement became obsolete when DHCP-LS, Web and SSC support objects were added." MODULE -- this module MANDATORY-GROUPS { juniSscClientGroup } ::= { juniSscClientMIBCompliances 1 } -- JUNOSe 2.0 juniSscClientAuthCompliance2 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for authentication clients implementing the Juniper SSC Client MIB authentication functionality. This statement became obsolete when the version number, local address and transport router name objects were added." MODULE -- this module MANDATORY-GROUPS { juniSscClientGroup2 } ::= { juniSscClientMIBCompliances 2 } -- JUNOSe 3.1 juniSscClientAuthCompliance3 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for clients implementing the Juniper SSC Client MIB functionality. This statement became obsolete when token scalar statistics were obsoleted and discover scalar statistics were added." MODULE -- this module MANDATORY-GROUPS { juniSscClientGroup3 } ::= { juniSscClientMIBCompliances 3 } -- JUNOSe 4.0 juniSscClientAuthCompliance4 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for clients implementing the Juniper SSC Client MIB functionality." MODULE -- this module MANDATORY-GROUPS { juniSscClientGroup4 } ::= { juniSscClientMIBCompliances 4 } -- JUNOSe 5.3 -- -- units of conformance -- juniSscClientGroup OBJECT-GROUP OBJECTS { juniSscClientServerSwitchoverTimeout, juniSscClientPrimaryAddress, juniSscClientPrimaryPort, juniSscClientSecondaryAddress, juniSscClientSecondaryPort, juniSscClientTertiaryAddress, juniSscClientTertiaryPort, juniSscClientActiveAddress, juniSscClientConnectionState, juniSscClientActivePort, juniSscClientPolicyCommandsReceived, juniSscClientPolicyCommandsListReceived, juniSscClientPolicyCommandsAcctReceived, juniSscClientBadPolicyCommandsReceived, juniSscClientErrorPolicyCommandsReceived, juniSscClientPolicyReportsSent, juniSscClientConnectionOpenRequests, juniSscClientConnectionOpenCompletes, juniSscClientConnectionClosedSent, juniSscClientConnectionClosedRemotely, juniSscClientCreateInterfacesSent, juniSscClientDeleteInterfacesSent, juniSscClientActiveIpInterfaces, juniSscClientIpInterfaceTransitions, juniSscClientSynchronizesReceived, juniSscClientSynchronizeCompletesSent, juniSscClientInternalErrors, juniSscClientCommunicationErrors } STATUS obsolete DESCRIPTION "Obsolete collection of objects providing management of SSC Clients. This group became obsolete when DHCP-LS, Web and SSC support objects were added." ::= { juniSscClientMIBGroups 1 } -- JUNOSe 2.0 juniSscClientGroup2 OBJECT-GROUP OBJECTS { juniSscClientServerSwitchoverTimeout, juniSscClientPrimaryAddress, juniSscClientPrimaryPort, juniSscClientSecondaryAddress, juniSscClientSecondaryPort, juniSscClientTertiaryAddress, juniSscClientTertiaryPort, juniSscClientActiveAddress, juniSscClientConnectionState, juniSscClientActivePort, juniSscClientPolicyCommandsReceived, juniSscClientPolicyCommandsListReceived, juniSscClientPolicyCommandsAcctReceived, juniSscClientBadPolicyCommandsReceived, juniSscClientErrorPolicyCommandsReceived, juniSscClientPolicyReportsSent, juniSscClientConnectionOpenRequests, juniSscClientConnectionOpenCompletes, juniSscClientConnectionClosedSent, juniSscClientConnectionClosedRemotely, juniSscClientCreateInterfacesSent, juniSscClientDeleteInterfacesSent, juniSscClientActiveIpInterfaces, juniSscClientIpInterfaceTransitions, juniSscClientSynchronizesReceived, juniSscClientSynchronizeCompletesSent, juniSscClientInternalErrors, juniSscClientCommunicationErrors, juniSscClientTokensSeen, juniSscClientActiveTokens, juniSscClientTokenTransitions, juniSscClientCreateTokensSent, juniSscClientDeleteTokensSent, juniSscClientActiveAddresses, juniSscClientAddressTransitions, juniSscClientCreateAddressesSent, juniSscClientDeleteAddressesSent, juniSscClientAuthenticationSuccesses, juniSscClientAuthenticationFailures } STATUS obsolete DESCRIPTION "Obsolete collection of objects providing management of SSC Clients. This group became obsolete when version number, local address and transport router name objects were added." ::= { juniSscClientMIBGroups 2 } -- JUNOSe 3.1 juniSscClientGroup3 OBJECT-GROUP OBJECTS { juniSscClientServerSwitchoverTimeout, juniSscClientPrimaryAddress, juniSscClientPrimaryPort, juniSscClientSecondaryAddress, juniSscClientSecondaryPort, juniSscClientTertiaryAddress, juniSscClientTertiaryPort, juniSscClientLocalAddress, juniSscClientTransportRouterName, juniSscClientActiveAddress, juniSscClientConnectionState, juniSscClientActivePort, juniSscClientVersion, juniSscClientPolicyCommandsReceived, juniSscClientPolicyCommandsListReceived, juniSscClientPolicyCommandsAcctReceived, juniSscClientBadPolicyCommandsReceived, juniSscClientErrorPolicyCommandsReceived, juniSscClientPolicyReportsSent, juniSscClientConnectionOpenRequests, juniSscClientConnectionOpenCompletes, juniSscClientConnectionClosedSent, juniSscClientConnectionClosedRemotely, juniSscClientCreateInterfacesSent, juniSscClientDeleteInterfacesSent, juniSscClientActiveIpInterfaces, juniSscClientIpInterfaceTransitions, juniSscClientSynchronizesReceived, juniSscClientSynchronizeCompletesSent, juniSscClientInternalErrors, juniSscClientCommunicationErrors, juniSscClientTokensSeen, juniSscClientActiveTokens, juniSscClientTokenTransitions, juniSscClientCreateTokensSent, juniSscClientDeleteTokensSent, juniSscClientActiveAddresses, juniSscClientAddressTransitions, juniSscClientCreateAddressesSent, juniSscClientDeleteAddressesSent, juniSscClientAuthenticationSuccesses, juniSscClientAuthenticationFailures } STATUS obsolete DESCRIPTION "Obsolete collection of objects providing management of SSC Clients. This group became obsolete when token scalar statistics were obsoleted and discover scalar statistics were added." ::= { juniSscClientMIBGroups 3 } -- JUNOSe 4.0 juniSscClientGroup4 OBJECT-GROUP OBJECTS { juniSscClientServerSwitchoverTimeout, juniSscClientPrimaryAddress, juniSscClientPrimaryPort, juniSscClientSecondaryAddress, juniSscClientSecondaryPort, juniSscClientTertiaryAddress, juniSscClientTertiaryPort, juniSscClientLocalAddress, juniSscClientTransportRouterName, juniSscClientActiveAddress, juniSscClientConnectionState, juniSscClientActivePort, juniSscClientVersion, juniSscClientPolicyCommandsReceived, juniSscClientPolicyCommandsListReceived, juniSscClientPolicyCommandsAcctReceived, juniSscClientBadPolicyCommandsReceived, juniSscClientErrorPolicyCommandsReceived, juniSscClientPolicyReportsSent, juniSscClientConnectionOpenRequests, juniSscClientConnectionOpenCompletes, juniSscClientConnectionClosedSent, juniSscClientConnectionClosedRemotely, juniSscClientCreateInterfacesSent, juniSscClientDeleteInterfacesSent, juniSscClientActiveIpInterfaces, juniSscClientIpInterfaceTransitions, juniSscClientSynchronizesReceived, juniSscClientSynchronizeCompletesSent, juniSscClientInternalErrors, juniSscClientCommunicationErrors, juniSscClientActiveAddresses, juniSscClientAddressTransitions, juniSscClientCreateAddressesSent, juniSscClientDeleteAddressesSent, juniSscClientDiscoversSeen, juniSscClientActiveDiscovers, juniSscClientDiscoverTransitions, juniSscClientCreateDiscoversSent, juniSscClientDeleteDiscoversSent } STATUS current DESCRIPTION "The basic collection of objects providing management of SSC Clients." ::= { juniSscClientMIBGroups 4 } -- JUNOSe 5.3 END