-- ***************************************************************************** -- Juniper-PPPOE-PROFILE-MIB -- -- Juniper Networks Enterprise MIB -- Point-to-Point Protocol over Ethernet (PPPoE) Profile MIB -- -- Copyright (c) 2001, 2002 Unisphere Networks, Inc. -- Copyright (c) 2002-2005 Juniper Networks, Inc. -- Copyright (c) 2008 Juniper Networks, Inc. -- All Rights Reserved. -- ***************************************************************************** Juniper-PPPOE-PROFILE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32 FROM SNMPv2-SMI DisplayString FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF juniMibs FROM Juniper-MIBs JuniSetMap, JuniEnable FROM Juniper-TC; juniPppoeProfileMIB MODULE-IDENTITY LAST-UPDATED "200806181029Z" -- 18-Jun-08 03:59 PM EST ORGANIZATION "Juniper Networks, Inc." CONTACT-INFO " Juniper Networks, Inc. Postal: 10 Technology Park Drive Westford, MA 01886-3146 USA Tel: +1 978 589 5800 Email: mib@Juniper.net" DESCRIPTION "The point-to-point protocol over Ethernet (PPPoE) profile MIB for the Juniper enterprise." -- Revision History REVISION "200806181029Z" -- 18-Jun-08 03:59 PM EST - JUNOSe 9.3 DESCRIPTION "Added juniPppoeProfileMaxSessionOverride object." REVISION "200507131140Z" -- 13-Jul-05 11:40 AM EDT - JUNOSe 7.0.1 DESCRIPTION "Added MTU control object." REVISION "200406101925Z" -- 10-Jun-04 03:25 PM EDT - JUNOSe 7.0 DESCRIPTION "Added Remote Circuit Id Capture object." REVISION "200303112158Z" -- 11-Mar-03 04:58 PM EST - JUNOSe 5.1 DESCRIPTION "Added Service Name Table object." REVISION "200209162144Z" -- 16-Sep-02 05:44 PM EDT - JUNOSe 5.0 DESCRIPTION "Replaced Unisphere names with Juniper names." REVISION "200208152034Z" -- 15-Aug-02 04:34 PM EDT - JUNOSe 4.0 DESCRIPTION "Added PADI flag and packet trace support." REVISION "200208151907Z" -- 15-Aug-02 03:07 PM EDT - JUNOSe 3.2 DESCRIPTION "Added duplicate MAC address indicator and AC-NAME tag objects." REVISION "200103211832Z" -- 21-Mar-01 01:32 PM EST - JUNOSe 3.0 DESCRIPTION "Initial version of this MIB module." ::= { juniMibs 46 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Managed objects -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ juniPppoeProfileObjects OBJECT IDENTIFIER ::= { juniPppoeProfileMIB 1 } juniPppoeProfile OBJECT IDENTIFIER ::= { juniPppoeProfileObjects 1 } -- -- This MIB defines configuration profile structure for PPPoE interfaces. -- The creation/deletion of profiles and mapping of profile names to profile -- indices is coordinated in the Juniper-PROFILE-MIB. -- -- -- The PPPoE Profile Table -- juniPppoeProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniPppoeProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains profiles for configuring PPPoE interfaces/sessions. Entries in this table are created/deleted as a side-effect of corresponding operations to the juniProfileNameTable in the Juniper-PROFILE-MIB." ::= { juniPppoeProfile 1 } juniPppoeProfileEntry OBJECT-TYPE SYNTAX JuniPppoeProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A profile describing configuration of a PPPoE interface and its subinterfaces (sessions)." INDEX { juniPppoeProfileId } ::= { juniPppoeProfileTable 1 } JuniPppoeProfileEntry ::= SEQUENCE { juniPppoeProfileId Unsigned32, juniPppoeProfileSetMap JuniSetMap, juniPppoeProfileMaxNumSessions Integer32, juniPppoeProfileSubMotm DisplayString, juniPppoeProfileSubUrl DisplayString, juniPppoeProfileDupProtect JuniEnable, juniPppoeProfileAcName DisplayString, juniPppoeProfilePadiFlag JuniEnable, juniPppoeProfilePacketTrace JuniEnable, juniPppoeProfileServiceNameTableName DisplayString, juniPppoeProfilePadrRemoteCircuitIdCapture JuniEnable, juniPppoeProfileMtu Integer32, juniPppoeProfileMaxSessionOverride INTEGER } juniPppoeProfileId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The integer identifier associated with this profile. A value for this identifier is determined by locating or creating a profile name in the juniProfileNameTable." ::= { juniPppoeProfileEntry 1 } juniPppoeProfileSetMap OBJECT-TYPE SYNTAX JuniSetMap MAX-ACCESS read-write STATUS current DESCRIPTION "A bitmap representing which objects in this entry have been explicitly configured. See the definition of the JuniSetMap TEXTUAL-CONVENTION for details of use. The INDEX object(s) and this object are excluded from representation (i.e. their bits are never set). When a SET request does not explicitly configure JuniSetMap, bits in JuniSetMap are set as a side-effect of configuring other profile attributes in the same entry. If, however, a SET request explicitly configures JuniSetMap, the explicitly configured value overrides 1) any previous bit settings, and 2) any simultaneous 'side-effect' settings that would otherwise occur. Once set, bits can only be cleared by explicitly configuring JuniSetMap." ::= { juniPppoeProfileEntry 2 } -- -- PPPoE main interface parameters -- juniPppoeProfileMaxNumSessions OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of PPPoE sessions (subinterfaces) that can be configured on the main PPPoE interface created using this profile. A value of zero indicates no bound is configured." DEFVAL { 0 } ::= { juniPppoeProfileEntry 3 } -- -- Other major parameters follow the sub interface parameters -- -- -- PPPoE subinterface parameters -- juniPppoeProfileSubMotm OBJECT-TYPE SYNTAX DisplayString (SIZE(0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "A message to send via a PADM on the sub-interface when this profile is applied to the IP interface above this PPPoE sub- interface. A client may choose to display this message to the user." ::= { juniPppoeProfileEntry 4 } juniPppoeProfileSubUrl OBJECT-TYPE SYNTAX DisplayString (SIZE(0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "A URL to be sent via a PADM on the sub-interface when this profile is applied to the IP interface above this PPPoE sub-interface. The string entered here can have several substitutions applied: %D is replaced with the profile name %d is replaced with the domain name %u is replaced with the user name %U is replaced with the user/domain name together %% is replaced with the % character The resulting string must not be greater than 127 octets long. The client may use this URL as the initial web-page for the user." ::= { juniPppoeProfileEntry 5 } juniPppoeProfileDupProtect OBJECT-TYPE SYNTAX JuniEnable MAX-ACCESS read-write STATUS current DESCRIPTION "Flag to control whether duplicate MAC addresses are allowed" DEFVAL { disable } ::= { juniPppoeProfileEntry 6 } juniPppoeProfileAcName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name to use for the AC-NAME tag that is sent in any PADO that is sent on this interface." ::= { juniPppoeProfileEntry 7 } juniPppoeProfilePadiFlag OBJECT-TYPE SYNTAX JuniEnable MAX-ACCESS read-write STATUS current DESCRIPTION "The PPPoE major interface parameter PADI flag controls whether to always repsond to a PADI with a PADO regardless of the ability to create the session and allow the session establish phase to resolve it." DEFVAL { disable } ::= { juniPppoeProfileEntry 8 } juniPppoeProfilePacketTrace OBJECT-TYPE SYNTAX JuniEnable MAX-ACCESS read-write STATUS current DESCRIPTION "The PPPoE major interface parameter packet tracing flag controls whether packet tracing is enable or not." DEFVAL { disable } ::= { juniPppoeProfileEntry 9 } juniPppoeProfileServiceNameTableName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..31)) MAX-ACCESS read-write STATUS current DESCRIPTION "The PPPoE Service name table controls behavior of PADO control packets." ::= { juniPppoeProfileEntry 10 } juniPppoeProfilePadrRemoteCircuitIdCapture OBJECT-TYPE SYNTAX JuniEnable MAX-ACCESS read-write STATUS current DESCRIPTION "The PPPoE major interface parameter PADR remote circuit id capture flag controls whether the remote circuit id string possibly contained in the PADR packet will be saved and used by AAA to replace the NAS-PORT-ID field." DEFVAL { disable } ::= { juniPppoeProfileEntry 11 } juniPppoeProfileMtu OBJECT-TYPE SYNTAX Integer32 (1|2|66..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The initial Maximum Transmit Unit (MTU) that the PPPoE major interface entity will advertise to the remote entity. If the value of this variable is 1 then the local PPPoE entity will use an MTU value determined by its underlying media interface. If the value of this variable is 2 then the local PPPoE entity will use a value determined by the PPPoE Max-Mtu-Tag transmitted from the client in the PADR packet. If no Max-Mtu-Tag is received, the value defaults to a maximum of 1494. The operational MTU is limited by the MTU of the underlying media interface minus the PPPoE frame overhead." DEFVAL { 1494 } ::= { juniPppoeProfileEntry 12 } juniPppoeProfileMaxSessionOverride OBJECT-TYPE SYNTAX INTEGER { override(1), ignore(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the action to be taken by PPPoE when RADIUS server returns the PPPoE max-session value: override Override the current PPPoE max-session value with the value returned by RADIUS server Ignore Ignore the max-session value returned by RADIUS server" DEFVAL { ignore } ::= { juniPppoeProfileEntry 13 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Notifications -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- No notifications are defined in this MIB. -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Conformance information -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ juniPppoeProfileConformance OBJECT IDENTIFIER ::= { juniPppoeProfileMIB 4 } juniPppoeProfileCompliances OBJECT IDENTIFIER ::= { juniPppoeProfileConformance 1 } juniPppoeProfileGroups OBJECT IDENTIFIER ::= { juniPppoeProfileConformance 2 } -- -- compliance statements -- juniPppoeProfileCompliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities which implement the Juniper PPPoE Profile MIB. This statement became obsolete when the duplicate MAC address indicator and AC-NAME tag were added." MODULE -- this module MANDATORY-GROUPS { juniPppoeProfileGroup } ::= { juniPppoeProfileCompliances 1 } -- JUNOSe 3.0 juniPppoeCompliance2 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities which implement the Juniper PPPoE profile MIB. This statement became obsolete when PADI flag, AC-name and packet trace objects were added." MODULE -- this module MANDATORY-GROUPS { juniPppoeProfileGroup2 } ::= { juniPppoeProfileCompliances 2 } -- JUNOSe 3.2 juniPppoeCompliance3 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities which implement the Juniper PPPoE profile MIB. This statement became obsolete when the service name table was added." MODULE -- this module MANDATORY-GROUPS { juniPppoeProfileGroup3 } ::= { juniPppoeProfileCompliances 3 } -- JUNOSe 4.0 juniPppoeCompliance4 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities which implement the Juniper PPPoE profile MIB. This statement became obsolete when the remote circuit id capture was added." MODULE -- this module MANDATORY-GROUPS { juniPppoeProfileGroup4 } ::= { juniPppoeProfileCompliances 4 } -- JUNOSe 5.1 juniPppoeCompliance5 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities which implement the Juniper PPPoE MIB. This statement became obsolete when support was added for MTU configuration." MODULE -- this module MANDATORY-GROUPS { juniPppoeProfileGroup5 } ::= { juniPppoeProfileCompliances 5 } -- JUNOSe 7.0 juniPppoeCompliance6 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities which implement the Juniper PPPoE MIB. This statement became obsolete when support was added for juniPppoeProfileMaxSessionOverride." MODULE -- this module MANDATORY-GROUPS { juniPppoeProfileGroup6 } ::= { juniPppoeProfileCompliances 6 } -- JUNOSe 7.1 juniPppoeCompliance7 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the Juniper PPPoE Profile MIB." MODULE -- this module MANDATORY-GROUPS { juniPppoeProfileGroup7 } ::= { juniPppoeProfileCompliances 7 } -- JUNOSe 9.3 -- -- units of conformance -- juniPppoeProfileGroup OBJECT-GROUP OBJECTS { juniPppoeProfileSetMap, juniPppoeProfileMaxNumSessions, juniPppoeProfileSubMotm, juniPppoeProfileSubUrl } STATUS obsolete DESCRIPTION "Obsolete collection of objects providing management of profile functionality for PPPoE interfaces in a Juniper product. This group became obsolete when the duplicate MAC address indicator and AC-NAME tag objects were added." ::= { juniPppoeProfileGroups 1 } juniPppoeProfileGroup2 OBJECT-GROUP OBJECTS { juniPppoeProfileSetMap, juniPppoeProfileMaxNumSessions, juniPppoeProfileSubMotm, juniPppoeProfileSubUrl, juniPppoeProfileDupProtect, juniPppoeProfileAcName } STATUS obsolete DESCRIPTION "Obsolete collection of objects providing management of profile functionality for PPPOE interfaces in a Juniper product. This group became obsolete when PADI flag, AC-name and packet trace objects were added." ::= { juniPppoeProfileGroups 2 } juniPppoeProfileGroup3 OBJECT-GROUP OBJECTS { juniPppoeProfileSetMap, juniPppoeProfileMaxNumSessions, juniPppoeProfileSubMotm, juniPppoeProfileSubUrl, juniPppoeProfileDupProtect, juniPppoeProfileAcName, juniPppoeProfilePadiFlag, juniPppoeProfilePacketTrace } STATUS obsolete DESCRIPTION "A collection of objects providing management of profile functionality for PPPOE interfaces in a Juniper product." ::= { juniPppoeProfileGroups 3 } juniPppoeProfileGroup4 OBJECT-GROUP OBJECTS { juniPppoeProfileSetMap, juniPppoeProfileMaxNumSessions, juniPppoeProfileSubMotm, juniPppoeProfileSubUrl, juniPppoeProfileDupProtect, juniPppoeProfileAcName, juniPppoeProfilePadiFlag, juniPppoeProfilePacketTrace, juniPppoeProfileServiceNameTableName } STATUS obsolete DESCRIPTION "A collection of objects providing management of profile functionality for PPPOE interfaces in a Juniper product." ::= { juniPppoeProfileGroups 4 } juniPppoeProfileGroup5 OBJECT-GROUP OBJECTS { juniPppoeProfileSetMap, juniPppoeProfileMaxNumSessions, juniPppoeProfileSubMotm, juniPppoeProfileSubUrl, juniPppoeProfileDupProtect, juniPppoeProfileAcName, juniPppoeProfilePadiFlag, juniPppoeProfilePacketTrace, juniPppoeProfileServiceNameTableName, juniPppoeProfilePadrRemoteCircuitIdCapture } STATUS obsolete DESCRIPTION "A collection of objects providing management of profile functionality for PPPOE interfaces in a Juniper product." ::= { juniPppoeProfileGroups 5 } juniPppoeProfileGroup6 OBJECT-GROUP OBJECTS { juniPppoeProfileSetMap, juniPppoeProfileMaxNumSessions, juniPppoeProfileSubMotm, juniPppoeProfileSubUrl, juniPppoeProfileDupProtect, juniPppoeProfileAcName, juniPppoeProfilePadiFlag, juniPppoeProfilePacketTrace, juniPppoeProfileServiceNameTableName, juniPppoeProfilePadrRemoteCircuitIdCapture, juniPppoeProfileMtu } STATUS obsolete DESCRIPTION "A collection of objects providing management of profile functionality for PPPOE interfaces in a Juniper product." ::= { juniPppoeProfileGroups 6 } juniPppoeProfileGroup7 OBJECT-GROUP OBJECTS { juniPppoeProfileSetMap, juniPppoeProfileMaxNumSessions, juniPppoeProfileSubMotm, juniPppoeProfileSubUrl, juniPppoeProfileDupProtect, juniPppoeProfileAcName, juniPppoeProfilePadiFlag, juniPppoeProfilePacketTrace, juniPppoeProfileServiceNameTableName, juniPppoeProfilePadrRemoteCircuitIdCapture, juniPppoeProfileMtu, juniPppoeProfileMaxSessionOverride } STATUS current DESCRIPTION "A collection of objects providing management of profile functionality for PPPOE interfaces in a Juniper product." ::= { juniPppoeProfileGroups 7 } END