-- ***************************************************************************** -- Juniper-FRACTIONAL-T1-MIB -- -- Juniper Networks Enterprise MIB -- Fractional T1 MIB -- -- Copyright (c) 1998, 1999 Redstone Communications, Inc. -- Copyright (c) 1999, 2000 Unisphere Networks, Inc. -- Copyright (c) 2002 Juniper Networks, Inc. -- All Rights Reserved. -- ***************************************************************************** Juniper-FRACTIONAL-T1-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI RowStatus FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB juniMibs FROM Juniper-MIBs JuniNextIfIndex, JuniTimeSlotMap FROM Juniper-TC; juniFt1MIB MODULE-IDENTITY LAST-UPDATED "200209162144Z" -- 16-Sep-02 05:44 PM EDT ORGANIZATION "Juniper Networks, Inc." CONTACT-INFO " Juniper Networks, Inc. Postal: 10 Technology Park Drive Westford MA 01886-3146 USA Tel: +1 978 589 5800 Email: mib@Juniper.net" DESCRIPTION "The Fractional T1 MIB for the Juniper Networks enterprise." -- Revision History REVISION "200209162144Z" -- 16-Sep-02 05:44 PM EDT - JUNOSe 5.0 DESCRIPTION "Replaced Unisphere names with Juniper names." REVISION "200009261730Z" -- 26-Sep-00 01:50 PM EDT - JUNOSe 3.0 DESCRIPTION "Make it SMIv2 conformant." REVISION "9907140000Z" -- 14-Jul-99 DESCRIPTION "Obsoleted juniFt1IfDataPolarity and updated corresponding compliances." REVISION "9811130000Z" -- 13-Nov-98 DESCRIPTION "Initial version of this MIB module." ::= { juniMibs 6 } -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Managed objects -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ juniFt1Objects OBJECT IDENTIFIER ::= { juniFt1MIB 1 } -- -- This MIB contains managed objects for Fractional T1 arrangements. -- Management objects are provided to query for an available -- interface index, and to create/delete interfaces of this type. -- Creating/deleting this interface type using this MIB has -- the side effect of creating/deleting corresponding entries -- in the Interface MIB ifTable/ifXTable, and in the Juniper -- Enterprise Interface MIB juniIfTable. -- -- ////////////////////////////////////////////////////////////////////// -- -- Fractional T1 Interfaces -- -- ////////////////////////////////////////////////////////////////////// -- -- IfIndex selection for creating new FT1 interfaces -- juniFt1NextIfIndex OBJECT-TYPE SYNTAX JuniNextIfIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Coordinate ifIndex value allocation for entries in juniFt1IfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously." ::= { juniFt1Objects 1 } -- -- The FT1 Interface Table -- juniFt1IfTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniFt1IfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains entries for FT1 interfaces present in the system." ::= { juniFt1Objects 2 } juniFt1IfEntry OBJECT-TYPE SYNTAX JuniFt1IfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry describes the characteristics of an FT1 interface. Creating/deleting entries in this table causes corresponding entries for be created /deleted in ifTable/ifXTable/juniIfTable." INDEX { juniFt1IfIndex } ::= { juniFt1IfTable 1 } JuniFt1IfEntry ::= SEQUENCE { juniFt1IfIndex InterfaceIndex, juniFt1IfRowStatus RowStatus, juniFt1IfLowerIfIndex InterfaceIndexOrZero, juniFt1IfTimeSlotMap JuniTimeSlotMap, juniFt1IfTimeSlotRate INTEGER, juniFt1IfDataPolarity INTEGER, juniFt1IfLoopbackConfig INTEGER } juniFt1IfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of the FT1 interface. When creating entries in this table, suitable values for this object are determined by reading juniFt1NextIfIndex." ::= { juniFt1IfEntry 1 } juniFt1IfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniFt1IfRowStatus juniFt1IfLowerIfIndex juniFt1IfTimeSlotMap In addition, when creating an entry the following conditions must hold: A value for juniFt1IfIndex must have been determined previously, by reading juniFt1NextIfIndex. The DS1 interface identified by juniFt1IfLowerIfIndex must exist. The DS0s specified in juniFt1IfTimeSlotMap must be available (unallocated) on the DS1 interface identified by juniFt1IfLowerIfIndex. A corresponding entry in ifTable/ifXTable/juniIfTable is created/ destroyed as a result of creating/destroying an entry in this table." ::= { juniFt1IfEntry 2 } juniFt1IfLowerIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The ifIndex of a DS1 interface over which this FT1 interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation." ::= { juniFt1IfEntry 3 } juniFt1IfTimeSlotMap OBJECT-TYPE SYNTAX JuniTimeSlotMap MAX-ACCESS read-create STATUS current DESCRIPTION "A bitmap representing the DS0s on the underlying DS1 interface that have been allocated to this FT1 interface." ::= { juniFt1IfEntry 4 } juniFt1IfTimeSlotRate OBJECT-TYPE SYNTAX INTEGER { nx56kbps(0), nx64kbps(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Data rate per time slot allocated to this FT1 interface." DEFVAL { nx64kbps } ::= { juniFt1IfEntry 5 } juniFt1IfDataPolarity OBJECT-TYPE SYNTAX INTEGER { normal(0), inverted(1) } MAX-ACCESS read-create STATUS obsolete DESCRIPTION "Obsolete. Polarity of data transmitted on this FT1 interface. Inverted data is used for certain line coding configurations to ensure sufficient one's density for timing recovery by the remote end." DEFVAL { normal } ::= { juniFt1IfEntry 6 } juniFt1IfLoopbackConfig OBJECT-TYPE SYNTAX INTEGER { noLoop(0), loop(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Selects loopback configuration. loop(1) causes received data to be looped back out the transmitter." DEFVAL { noLoop } ::= { juniFt1IfEntry 7 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Notifications -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- No notifications are defined in this MIB. Placeholders follow. -- juniFt1TrapControl OBJECT IDENTIFIER ::= { juniFt1MIB 2 } -- juniFt1Traps OBJECT IDENTIFIER ::= { juniFt1MIB 3 } -- juniFt1TrapPrefix OBJECT IDENTIFIER ::= { juniFt1Traps 0 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Conformance information -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ juniFt1Conformance OBJECT IDENTIFIER ::= { juniFt1MIB 4 } juniFt1Compliances OBJECT IDENTIFIER ::= { juniFt1Conformance 1 } juniFt1Groups OBJECT IDENTIFIER ::= { juniFt1Conformance 2 } -- -- compliance statements -- juniFt1Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities that implement the Juniper FT1 MIB. This statement became obsolete when the interface data polarity object was obsoleted." MODULE -- this module MANDATORY-GROUPS { juniFt1Group } ::= { juniFt1Compliances 1 } juniFt1Compliance2 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities that implement the Juniper FT1 MIB." MODULE -- this module MANDATORY-GROUPS { juniFt1Group2 } ::= { juniFt1Compliances 2 } -- -- units of conformance -- juniFt1Group OBJECT-GROUP OBJECTS { juniFt1NextIfIndex, juniFt1IfRowStatus, juniFt1IfLowerIfIndex, juniFt1IfTimeSlotMap, juniFt1IfTimeSlotRate, juniFt1IfDataPolarity, juniFt1IfLoopbackConfig } STATUS obsolete DESCRIPTION "Obsolete collection of objects providing management of FT1 interfaces in a Juniper product. This group became obsolete when the interface data polarity object was obsoleted." ::= { juniFt1Groups 1 } juniFt1Group2 OBJECT-GROUP OBJECTS { juniFt1NextIfIndex, juniFt1IfRowStatus, juniFt1IfLowerIfIndex, juniFt1IfTimeSlotMap, juniFt1IfTimeSlotRate, juniFt1IfLoopbackConfig } STATUS current DESCRIPTION "A collection of objects providing management of FT1 interfaces in a Juniper product." ::= { juniFt1Groups 2 } END