-- ***************************************************************************** -- Juniper-FILE-XFER-MIB -- -- Juniper Networks Enterprise MIB -- File Transfer MIB -- -- Copyright (c) 1999 Redstone Communications, Inc. -- Copyright (c) 1999, 2001 Unisphere Networks, Inc. -- Copyright (c) 2002 Juniper Networks, Inc. -- All Rights Reserved. -- ***************************************************************************** Juniper-FILE-XFER-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, TimeTicks FROM SNMPv2-SMI RowStatus, DisplayString FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF JuniName FROM Juniper-TC juniMibs FROM Juniper-MIBs; juniFileXferMIB MODULE-IDENTITY LAST-UPDATED "200209162144Z" -- 16-Sep-02 05:44 PM EDT ORGANIZATION "Juniper Networks, Inc." CONTACT-INFO " Juniper Networks, Inc. Postal: 10 Technology Park Drive Westford, MA 01886-3146 USA Tel: +1 978 589 5800 E-mail: mib@Juniper.net" DESCRIPTION "The File Transfer MIB for Juniper Networks enterprise." -- Revision History REVISION "200209162144Z" -- 16-Sep-02 05:44 PM EDT - JUNOSe 5.0 DESCRIPTION "Replaced Unisphere names with Juniper names." REVISION "200103281346Z" -- 28-Mar-01 08:46 AM EST - JUNOSe 3.0 DESCRIPTION "Make it SMIv2 conformant." REVISION "200005010000Z" -- 1-May-00 - JUNOSe 2.0 DESCRIPTION "Key revisions include: o Obsoleted juniFileXferRemoteUserName. o Obsoleted juniFileXferRemoteUserPassword. o Added juniFileXferRouterName. o Added juniFileXferCopyRunningCfgFailed(9) to juniFileXferStatus." REVISION "9908180000Z" -- 18-Aug-99 - JUNOSe 1.1 DESCRIPTION "Initial version of this MIB module." ::= { juniMibs 23 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Managed objects -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ juniFileXferObjects OBJECT IDENTIFIER ::= { juniFileXferMIB 1 } juniFileXferTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniFileXferTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries which describe file transfers." ::= { juniFileXferObjects 1 } juniFileXferTableEntry OBJECT-TYPE SYNTAX JuniFileXferTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A description of a particular file transfer entry." INDEX { juniFileXferIndex } ::= { juniFileXferTable 1 } JuniFileXferTableEntry ::= SEQUENCE { juniFileXferIndex INTEGER, juniFileXferDirection INTEGER, juniFileXferFileType INTEGER, juniFileXferRemoteFileName DisplayString, juniFileXferRemoteUserName DisplayString, juniFileXferRemoteUserPassword OCTET STRING, juniFileXferLocalFileName DisplayString, juniFileXferProtocol INTEGER, juniFileXferStatus INTEGER, juniFileXferRowStatus RowStatus, juniFileXferTimeStamp TimeTicks, juniFileXferRouterName JuniName } juniFileXferIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "A unique index used to identify this entry." ::= { juniFileXferTableEntry 1 } juniFileXferDirection OBJECT-TYPE SYNTAX INTEGER { juniFileXferLocalToRemote(1), juniFileXferRemoteToLocal(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the direction of the file transfer." DEFVAL { juniFileXferRemoteToLocal } ::= { juniFileXferTableEntry 2 } juniFileXferFileType OBJECT-TYPE SYNTAX INTEGER { juniFileXferSoftwareRelease(1), juniFileXferSystemConfig(2), juniFileXferRunningConfig(3), juniFileXferSystemLog(4), juniFileXferScript(5), juniFileXferRebootHistory(6), juniFileXferBulkStatistics(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the file type of the file transfer." DEFVAL { juniFileXferBulkStatistics } ::= { juniFileXferTableEntry 3 } juniFileXferRemoteFileName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The full path name of the source/destination file on the remote system." DEFVAL { "" } ::= { juniFileXferTableEntry 4 } juniFileXferRemoteUserName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The user name to use when requesting the file transfer to/from the remote system. This object has been obsoleted. Use the enterprise host mib in order to configure the username." DEFVAL { "anonymous" } ::= { juniFileXferTableEntry 5 } juniFileXferRemoteUserPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..64)) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The password to use when requesting the file transfer to/from the remote system. When read, this object returns a zero string. Note that, for security reasons, some FTP servers may insist on a non-zero length user password. This object has been obsoleted. Use the enterprise host MIB in order to configure the password." DEFVAL { "anonymous" } ::= { juniFileXferTableEntry 6 } juniFileXferLocalFileName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The local file name to transfer or to create as a result of an incoming transfer." DEFVAL { "" } ::= { juniFileXferTableEntry 7 } juniFileXferProtocol OBJECT-TYPE SYNTAX INTEGER { juniFileXferFtp(1), juniFileXferTftp(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the file transfer protocol type." DEFVAL { juniFileXferFtp } ::= { juniFileXferTableEntry 8 } juniFileXferStatus OBJECT-TYPE SYNTAX INTEGER { juniFileXferSuccessfulCompletion(1), juniFileXferInProgress(2), juniFileXferRemoteUnreachable(3), juniFileXferUserAuthFailed(4), juniFileXferFileNotFound(5), juniFileXferFileTooBig(6), juniFileXferFileIncompatible(7), juniFileXferPended(8), juniFileXferCopyRunningCfgFailed(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the file transfer." ::= { juniFileXferTableEntry 9 } juniFileXferRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified for SNMPv2. Setting this object to createAndGo(4) is allowed. If required objects are missing, the agent will create the row and set its status to notReady(3). If all of the required objects are present and valid, the agent will create the row, set it to active and commence the file transfer. Upon completion of the file transfer, the agent will set the rowStatus to notInService(2), indicating that the row is valid and useable by a management client. To commence another transfer, a management client should set the rowStatus to active(1). Setting this object to createAndWait(5) causes an entry to be created with juniFileXferRowStatus value of notInService(2) if all of the required objects are present and valid. Or, if some of the required objects are missing or invalid, the agent will create the row and sets its status to notReady(3). Setting this object to active(1) causes the transfer to start for the given row. Objects within the row cannot be modified once a row has been set to active(1), Setting this object to destroy(6) causes the corresponding row to be deleted. Note that only a single instance of a row can be active at at any given moment, although several rows can exist in the table." ::= { juniFileXferTableEntry 10 } juniFileXferTimeStamp OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the last status change for this entry." ::= { juniFileXferTableEntry 11 } juniFileXferRouterName OBJECT-TYPE SYNTAX JuniName MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the router to be used when resolving the hostname portion of the juniFileXferRemoteFileName object. If this object contains an invalid or empty value, the default router will be used." ::= { juniFileXferTableEntry 12 } juniFileXferTrapEnabled OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "An indication of whether the juniFileXferTrap trap is enabled." ::= { juniFileXferObjects 2 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Notifications -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ juniFileXferNotifications OBJECT IDENTIFIER ::= { juniFileXferMIB 2 } juniFileXferNotifyPrefix OBJECT IDENTIFIER ::= { juniFileXferNotifications 0 } juniFileXferTrap NOTIFICATION-TYPE OBJECTS { juniFileXferStatus, juniFileXferTimeStamp } STATUS current DESCRIPTION "An indication that the status associated with a particular file transfer entry has changed." ::= { juniFileXferNotifyPrefix 1 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Conformance information -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ juniFileXferConformance OBJECT IDENTIFIER ::= { juniFileXferMIB 4 } juniFileXferCompliances OBJECT IDENTIFIER ::= { juniFileXferConformance 1 } juniFileXferGroups OBJECT IDENTIFIER ::= { juniFileXferConformance 2 } -- -- compliance statements -- juniFileXferCompliance1 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities that implement the Juniper file transfer MIB. This compliance statement became obsolete when remote user information was removed and router name was added." MODULE -- this module MANDATORY-GROUPS { juniFileXferGroup1, juniFileXferTrapGroup } ::= { juniFileXferCompliances 2 } -- JUNOSe 1.1 juniFileXferCompliance2 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities that implement the Juniper file transfer MIB." MODULE -- this module MANDATORY-GROUPS { juniFileXferGroup2, juniFileXferTrapGroup } ::= { juniFileXferCompliances 3 } -- JUNOSe 2.0 -- -- units of conformance -- juniFileXferGroup1 OBJECT-GROUP OBJECTS { juniFileXferIndex, juniFileXferDirection, juniFileXferFileType, juniFileXferRemoteFileName, juniFileXferRemoteUserName, juniFileXferRemoteUserPassword, juniFileXferLocalFileName, juniFileXferProtocol, juniFileXferStatus, juniFileXferRowStatus, juniFileXferTimeStamp, juniFileXferTrapEnabled } STATUS obsolete DESCRIPTION "Obsolete collection of objects providing management of file transfers in a Juniper product. This group became obsolete when remote user information was removed and juniFileXferRouterName was added." ::= { juniFileXferGroups 2 } juniFileXferGroup2 OBJECT-GROUP OBJECTS { juniFileXferIndex, juniFileXferDirection, juniFileXferFileType, juniFileXferRemoteFileName, juniFileXferLocalFileName, juniFileXferProtocol, juniFileXferStatus, juniFileXferRowStatus, juniFileXferTimeStamp, juniFileXferRouterName, juniFileXferTrapEnabled } STATUS current DESCRIPTION "A collection of objects providing management of file transfers in a Juniper product." ::= { juniFileXferGroups 3 } juniFileXferTrapGroup NOTIFICATION-GROUP NOTIFICATIONS { juniFileXferTrap } STATUS current DESCRIPTION "A management notification pertaining to file transfers." ::= { juniFileXferGroups 4 } END