-- ***************************************************************************** -- Juniper-ATM-CONF -- -- SNMP Agent Capabilities definitions for the ATM MIBs. -- -- Copyright (c) 2001, 2002 Unisphere Networks, Inc. -- Copyright (c) 2002-2005 Juniper Networks, Inc. -- All rights reserved. -- ***************************************************************************** Juniper-ATM-CONF DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY FROM SNMPv2-SMI AGENT-CAPABILITIES FROM SNMPv2-CONF juniAgents FROM Juniper-Agents; juniAtmAgent MODULE-IDENTITY LAST-UPDATED "200508171726Z" -- 17-Aug-05 01:26 PM EDT ORGANIZATION "Juniper Networks, Inc." CONTACT-INFO " Juniper Networks, Inc. Postal: 10 Technology Park Drive Westford, MA 01886-3146 USA Tel: +1 978 589 5800 E-mail: mib@Juniper.net" DESCRIPTION "Juniper-UNI-ATM-MIB: The agent capabilities definitions for the ATM component of the SNMP agent in the Juniper E-series family of products." -- Revision History REVISION "200508171726Z" -- 17-Aug-05 01:26 PM EDT - JUNOSe 7.3 DESCRIPTION "Juniper-UNI-ATM-MIB: Removed SVC support. ATM2-MIB: Removed SVC support." REVISION "200502172315Z" -- 17-Feb-05 06:15 PM EST - JUNOSe 7.1 DESCRIPTION "Juniper-UNI-ATM-MIB: Added circuit OAM support to the ATM VCC end point agent capabilities." REVISION "200401061953Z" -- 06-Jan-04 02:53 PM EST - JUNOSe 5.3 DESCRIPTION "Added support to export the subinterface description to the line cards." REVISION "200311071457Z" -- 07-Nov-03 09:57 AM EST - JUNOSe 5.2 DESCRIPTION "ATM2-MIB: Updated from an Internet Draft to a Proposed Standard (RFC 3606). Juniper-UNI-ATM-MIB: Added ATM sub-interface location support." REVISION "200305081757Z" -- 08-May-03 01:57 PM EDT - JUNOSe 5.1 DESCRIPTION "Juniper-UNI-ATM-MIB: Added ATM F4 OAM circuits management and ATM VP description support." REVISION "200209061654Z" -- 06-Sep-02 12:54 PM EDT - JUNOSe 5.0 DESCRIPTION "Juniper-UNI-ATM-MIB: Replaced Unisphere names with Juniper names." REVISION "200208091415Z" -- 09-Aug-02 10:15 AM EDT - JUNOSe 4.1 DESCRIPTION "ATM2-MIB: Added support for the atmSigStatTable, the atmAal5VclStatTable and the atmInterfaceExtTable. Juniper-UNI-ATM-MIB: Added receive bandwith support to CAC. Added E164 public addressing support." REVISION "200201291518Z" -- 29-Jan-02 10:18 AM EST - JUNOSe 4.0 DESCRIPTION "Juniper-UNI-ATM-MIB: Added ATM switched virtual connection (SVC) support to the VCC end point capabilities." REVISION "200201241416Z" -- 24-Jan-02 09:16 AM EST - JUNOSe 3.4 DESCRIPTION "Juniper-UNI-ATM-MIB: Added support for ATM connection admission control (CAC) to the VCC end point capabilities." REVISION "200112141951Z" -- 14-Dec-01 02:51 PM EST - JUNOSe 3.3 DESCRIPTION "Juniper-UNI-ATM-MIB: Added ATM traffic shaping capabilities." REVISION "200105231612Z" -- 23-May-01 12:12 PM EDT - JUNOSe 3.2 DESCRIPTION "The initial release of this management information module." ::= { juniAgents 3 } -- ***************************************************************************** -- ATM VCC end point agent capabilities -- ***************************************************************************** juniAtmVccEndPointAgent OBJECT IDENTIFIER ::= { juniAtmAgent 1 } juniAtmVccEndPointAgentV1 AGENT-CAPABILITIES PRODUCT-RELEASE "Version 1 of the ATM VCC end point agent subcomponent of the JUNOSe SNMP agent. This version of the ATM end point subcomponent was supported in JUNOSe 3.0 and 3.1 system releases." STATUS obsolete DESCRIPTION "The MIBs supported by the SNMP agent for the ATM application in JUNOSe. These capabilities became obsolete when new objects were added to the juniAtmSubIfGroup and support for the atmfM4IfLoopbackLocationCode object was added." SUPPORTS ATM-MIB INCLUDES { atmInterfaceTCGroup, aal5VccGroup, atmInterfaceConfGroup2, atmVccTerminationGroup2 } VARIATION atmVclAdminStatus ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclReceiveTrafficDescrIndex ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclTransmitTrafficDescrIndex ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVccAalType ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclRowStatus ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclCastType ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclConnKind ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." SUPPORTS Juniper-UNI-ATM-MIB INCLUDES { juniAtmGroup, juniAtmAal5Group, juniAtmSubIfGroup } ::= { juniAtmVccEndPointAgent 1 } juniAtmVccEndPointAgentV2 AGENT-CAPABILITIES PRODUCT-RELEASE "Version 2 of the ATM VCC end point agent subcomponent of the JUNOSe SNMP agent. This version of the ATM end point subcomponent was supported in JUNOSe 3.2 and JUNOSe 3.3 system releases." STATUS obsolete DESCRIPTION "The MIBs supported by the SNMP agent for the ATM application in JUNOSe. These capabilities became obsolete when support was added to the Juniper-UNI-ATM-MIB for connection admission control (CAC)." SUPPORTS ATM-MIB INCLUDES { atmInterfaceTCGroup, aal5VccGroup, atmInterfaceConfGroup2, atmVccTerminationGroup2 } VARIATION atmVclAdminStatus ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclReceiveTrafficDescrIndex ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclTransmitTrafficDescrIndex ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVccAalType ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclRowStatus ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclCastType ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclConnKind ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." SUPPORTS ATM-FORUM-SNMP-M4-MIB INCLUDES { atmfM4General, atmfM4AtmLayerGroup, atmfM4VpTestGroup, atmfM4VcTestGroup } VARIATION atmfM4NeVersion ACCESS not-implemented DESCRIPTION "The atmfM4NeVersion object is not supported." VARIATION atmfM4NeStartTime ACCESS not-implemented DESCRIPTION "The atmfM4NeStartTime object is not supported." VARIATION atmfM4NeAlarmSeverityIndex ACCESS not-implemented DESCRIPTION "The atmfM4NeAlarmSeverityIndex is not supported." VARIATION atmfM4NeSuppressZeroStats ACCESS not-implemented DESCRIPTION "The atmfM4NeSuppressZeroStats object is not supported." VARIATION atmfM4IfType ACCESS not-implemented DESCRIPTION "The atmfM4IfType object is not supported." VARIATION atmfM4IfSubscriberAddress ACCESS not-implemented DESCRIPTION "The atmfM4IfSubscriberAddress object is not supported." VARIATION atmfM4IfPreferredCarrier ACCESS not-implemented DESCRIPTION "The atmfM4IfPreferredCarrier object is not supported." VARIATION atmfM4IfFarEndCarrierNetwork ACCESS not-implemented DESCRIPTION "The IfFarEndCarrierNetwork object is not supported." VARIATION atmfM4VclSegEndPt ACCESS read-only DESCRIPTION "An atmfM4VclEntry cannot be created/modified via SNMP." SUPPORTS Juniper-UNI-ATM-MIB INCLUDES { juniAtmGroup2, juniAtmAal5Group, juniAtmSubIfGroup2, juniAtmVpPingControlGroup, juniAtmVcPingControlGroup, juniAtmPingTrapGroup } ::= { juniAtmVccEndPointAgent 2 } juniAtmVccEndPointAgentV3 AGENT-CAPABILITIES PRODUCT-RELEASE "Version 3 of the ATM VCC end point agent subcomponent of the JUNOSe SNMP agent. This version of the ATM end point subcomponent was supported in JUNOSe 3.4 and subsequent 3.x system releases." STATUS obsolete DESCRIPTION "The MIBs supported by the SNMP agent for the ATM application in JUNOSe. These capabilities became obsolete when support was added to the Juniper-UNI-ATM-MIB for switched virtual connection (SVC)." SUPPORTS ATM-MIB INCLUDES { atmInterfaceTCGroup, aal5VccGroup, atmInterfaceConfGroup2, atmVccTerminationGroup2 } VARIATION atmVclAdminStatus ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclReceiveTrafficDescrIndex ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclTransmitTrafficDescrIndex ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVccAalType ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclRowStatus ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclCastType ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclConnKind ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." SUPPORTS ATM-FORUM-SNMP-M4-MIB INCLUDES { atmfM4General, atmfM4AtmLayerGroup, atmfM4VpTestGroup, atmfM4VcTestGroup } VARIATION atmfM4NeVersion ACCESS not-implemented DESCRIPTION "The atmfM4NeVersion object is not supported." VARIATION atmfM4NeStartTime ACCESS not-implemented DESCRIPTION "The atmfM4NeStartTime object is not supported." VARIATION atmfM4NeAlarmSeverityIndex ACCESS not-implemented DESCRIPTION "The atmfM4NeAlarmSeverityIndex is not supported." VARIATION atmfM4NeSuppressZeroStats ACCESS not-implemented DESCRIPTION "The atmfM4NeSuppressZeroStats object is not supported." VARIATION atmfM4IfType ACCESS not-implemented DESCRIPTION "The atmfM4IfType object is not supported." VARIATION atmfM4IfSubscriberAddress ACCESS not-implemented DESCRIPTION "The atmfM4IfSubscriberAddress object is not supported." VARIATION atmfM4IfPreferredCarrier ACCESS not-implemented DESCRIPTION "The atmfM4IfPreferredCarrier object is not supported." VARIATION atmfM4IfFarEndCarrierNetwork ACCESS not-implemented DESCRIPTION "The IfFarEndCarrierNetwork object is not supported." VARIATION atmfM4VclSegEndPt ACCESS read-only DESCRIPTION "An atmfM4VclEntry cannot be created/modified via SNMP." SUPPORTS Juniper-UNI-ATM-MIB INCLUDES { juniAtmGroup3, juniAtmAal5Group, juniAtmSubIfGroup2, juniAtmVpPingControlGroup, juniAtmVcPingControlGroup, juniAtmPingTrapGroup } ::= { juniAtmVccEndPointAgent 3 } juniAtmVccEndPointAgentV4 AGENT-CAPABILITIES PRODUCT-RELEASE "Version 4 of the ATM VCC end point agent subcomponent of the JUNOSe SNMP agent. This version of the ATM end point subcomponent was supported in JUNOSe 4.0 system releases." STATUS obsolete DESCRIPTION "The MIBs supported by the SNMP agent for the ATM application in JUNOSe. These capabilitie became obsolete when CAC recieve bandwith and E164 public addressing objects were added." SUPPORTS ATM-MIB INCLUDES { atmInterfaceTCGroup, aal5VccGroup, atmInterfaceConfGroup2, atmVccTerminationGroup2 } VARIATION atmVclAdminStatus ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclReceiveTrafficDescrIndex ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclTransmitTrafficDescrIndex ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVccAalType ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclRowStatus ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclCastType ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclConnKind ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." SUPPORTS ATM2-MIB INCLUDES { atmCommonGroup, atmHostGroup } VARIATION atmVplLogicalPortDef ACCESS not-implemented DESCRIPTION "The atmVplLogicalPortTable is not supported." VARIATION atmVplLogicalPortIndex ACCESS not-implemented DESCRIPTION "The atmVplLogicalPortTable is not supported." VARIATION atmCurrentlyFailingPVplTimeStamp ACCESS not-implemented DESCRIPTION "The atmCurrentlyFailingPVplTable is not supported." VARIATION atmCurrentlyFailingPVclTimeStamp ACCESS not-implemented DESCRIPTION "The atmCurrentlyFailingPVclTable is not supported." VARIATION atmVclAddrType ACCESS not-implemented DESCRIPTION "The atmVclAddrTable is not supported." VARIATION atmVclAddrRowStatus ACCESS not-implemented DESCRIPTION "The atmVclAddrTable is not supported." VARIATION atmAddrVclAddrType ACCESS not-implemented DESCRIPTION "The atmAddrVclTable is not supported." VARIATION atmVclGenSigDescrIndex ACCESS not-implemented DESCRIPTION "The atmVclGenTable is not supported." SUPPORTS ATM-FORUM-SNMP-M4-MIB INCLUDES { atmfM4General, atmfM4AtmLayerGroup, atmfM4VpTestGroup, atmfM4VcTestGroup } VARIATION atmfM4NeVersion ACCESS not-implemented DESCRIPTION "The atmfM4NeVersion object is not supported." VARIATION atmfM4NeStartTime ACCESS not-implemented DESCRIPTION "The atmfM4NeStartTime object is not supported." VARIATION atmfM4NeAlarmSeverityIndex ACCESS not-implemented DESCRIPTION "The atmfM4NeAlarmSeverityIndex is not supported." VARIATION atmfM4NeSuppressZeroStats ACCESS not-implemented DESCRIPTION "The atmfM4NeSuppressZeroStats object is not supported." VARIATION atmfM4IfType ACCESS not-implemented DESCRIPTION "The atmfM4IfType object is not supported." VARIATION atmfM4IfSubscriberAddress ACCESS not-implemented DESCRIPTION "The atmfM4IfSubscriberAddress object is not supported." VARIATION atmfM4IfPreferredCarrier ACCESS not-implemented DESCRIPTION "The atmfM4IfPreferredCarrier object is not supported." VARIATION atmfM4IfFarEndCarrierNetwork ACCESS not-implemented DESCRIPTION "The IfFarEndCarrierNetwork object is not supported." VARIATION atmfM4VclSegEndPt ACCESS read-only DESCRIPTION "An atmfM4VclEntry cannot be created/modified via SNMP." SUPPORTS Juniper-UNI-ATM-MIB INCLUDES { juniAtmGroup4, juniAtmAal5Group, juniAtmSubIfGroup3, juniAtmVpPingControlGroup, juniAtmVcPingControlGroup, juniAtmPingTrapGroup, juniAtmSvcGroup } ::= { juniAtmVccEndPointAgent 4 } juniAtmVccEndPointAgentV5 AGENT-CAPABILITIES PRODUCT-RELEASE "Version 5 of the ATM VCC end point agent subcomponent of the JUNOSe SNMP agent. This version of the ATM end point subcomponent was supported in JUNOSe 4.1 thru 5.0 system releases." STATUS obsolete DESCRIPTION "The MIBs supported by the SNMP agent for the ATM application in JUNOSe. These capabilitie became obsolete when F4 flow OAM circuits and ATM VP description objects were added to the Juniper-UNI-ATM-MIB." SUPPORTS ATM-MIB INCLUDES { atmInterfaceTCGroup, aal5VccGroup, atmInterfaceConfGroup2, atmVccTerminationGroup2 } VARIATION atmVclAdminStatus ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclReceiveTrafficDescrIndex ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclTransmitTrafficDescrIndex ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVccAalType ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclRowStatus ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclCastType ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclConnKind ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." SUPPORTS ATM2-MIB INCLUDES { atmCommonGroup, atmHostGroup } VARIATION atmVplLogicalPortDef ACCESS not-implemented DESCRIPTION "The atmVplLogicalPortTable is not supported." VARIATION atmVplLogicalPortIndex ACCESS not-implemented DESCRIPTION "The atmVplLogicalPortTable is not supported." VARIATION atmCurrentlyFailingPVplTimeStamp ACCESS not-implemented DESCRIPTION "The atmCurrentlyFailingPVplTable is not supported." VARIATION atmCurrentlyFailingPVclTimeStamp ACCESS not-implemented DESCRIPTION "The atmCurrentlyFailingPVclTable is not supported." VARIATION atmVclAddrType ACCESS not-implemented DESCRIPTION "The atmVclAddrTable is not supported." VARIATION atmVclAddrRowStatus ACCESS not-implemented DESCRIPTION "The atmVclAddrTable is not supported." VARIATION atmAddrVclAddrType ACCESS not-implemented DESCRIPTION "The atmAddrVclTable is not supported." VARIATION atmVclGenSigDescrIndex ACCESS not-implemented DESCRIPTION "The atmVclGenTable is not supported." SUPPORTS ATM-FORUM-SNMP-M4-MIB INCLUDES { atmfM4General, atmfM4AtmLayerGroup, atmfM4VpTestGroup, atmfM4VcTestGroup } VARIATION atmfM4NeVersion ACCESS not-implemented DESCRIPTION "The atmfM4NeVersion object is not supported." VARIATION atmfM4NeStartTime ACCESS not-implemented DESCRIPTION "The atmfM4NeStartTime object is not supported." VARIATION atmfM4NeAlarmSeverityIndex ACCESS not-implemented DESCRIPTION "The atmfM4NeAlarmSeverityIndex is not supported." VARIATION atmfM4NeSuppressZeroStats ACCESS not-implemented DESCRIPTION "The atmfM4NeSuppressZeroStats object is not supported." VARIATION atmfM4IfType ACCESS not-implemented DESCRIPTION "The atmfM4IfType object is not supported." VARIATION atmfM4IfSubscriberAddress ACCESS not-implemented DESCRIPTION "The atmfM4IfSubscriberAddress object is not supported." VARIATION atmfM4IfPreferredCarrier ACCESS not-implemented DESCRIPTION "The atmfM4IfPreferredCarrier object is not supported." VARIATION atmfM4IfFarEndCarrierNetwork ACCESS not-implemented DESCRIPTION "The IfFarEndCarrierNetwork object is not supported." VARIATION atmfM4VclSegEndPt ACCESS read-only DESCRIPTION "An atmfM4VclEntry cannot be created/modified via SNMP." SUPPORTS Juniper-UNI-ATM-MIB INCLUDES { juniAtmGroup5, juniAtmAal5Group, juniAtmSubIfGroup4, juniAtmVpPingControlGroup, juniAtmVcPingControlGroup, juniAtmPingTrapGroup, juniAtmSvcGroup2 } ::= { juniAtmVccEndPointAgent 5 } juniAtmVccEndPointAgentV6 AGENT-CAPABILITIES PRODUCT-RELEASE "Version 6 of the ATM VCC end point agent subcomponent of the JUNOSe SNMP agent. This version of the ATM end point subcomponent was supported in JUNOSe 5.1 system releases." STATUS obsolete DESCRIPTION "The MIBs supported by the SNMP agent for the ATM application in JUNOSe. These capabilitie became obsolete when ATM sub-interface location support was added to the Juniper-UNI-ATM-MIB." SUPPORTS ATM-MIB INCLUDES { atmInterfaceTCGroup, aal5VccGroup, atmInterfaceConfGroup2, atmVccTerminationGroup2 } VARIATION atmVclAdminStatus ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclReceiveTrafficDescrIndex ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclTransmitTrafficDescrIndex ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVccAalType ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclRowStatus ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclCastType ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclConnKind ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." SUPPORTS ATM2-MIB INCLUDES { atmCommonGroup, atmHostGroup } VARIATION atmVplLogicalPortDef ACCESS not-implemented DESCRIPTION "The atmVplLogicalPortTable is not supported." VARIATION atmVplLogicalPortIndex ACCESS not-implemented DESCRIPTION "The atmVplLogicalPortTable is not supported." VARIATION atmCurrentlyFailingPVplTimeStamp ACCESS not-implemented DESCRIPTION "The atmCurrentlyFailingPVplTable is not supported." VARIATION atmCurrentlyFailingPVclTimeStamp ACCESS not-implemented DESCRIPTION "The atmCurrentlyFailingPVclTable is not supported." VARIATION atmVclAddrType ACCESS not-implemented DESCRIPTION "The atmVclAddrTable is not supported." VARIATION atmVclAddrRowStatus ACCESS not-implemented DESCRIPTION "The atmVclAddrTable is not supported." VARIATION atmAddrVclAddrType ACCESS not-implemented DESCRIPTION "The atmAddrVclTable is not supported." VARIATION atmVclGenSigDescrIndex ACCESS not-implemented DESCRIPTION "The atmVclGenTable is not supported." SUPPORTS ATM-FORUM-SNMP-M4-MIB INCLUDES { atmfM4General, atmfM4AtmLayerGroup, atmfM4VpTestGroup, atmfM4VcTestGroup } VARIATION atmfM4NeVersion ACCESS not-implemented DESCRIPTION "The atmfM4NeVersion object is not supported." VARIATION atmfM4NeStartTime ACCESS not-implemented DESCRIPTION "The atmfM4NeStartTime object is not supported." VARIATION atmfM4NeAlarmSeverityIndex ACCESS not-implemented DESCRIPTION "The atmfM4NeAlarmSeverityIndex is not supported." VARIATION atmfM4NeSuppressZeroStats ACCESS not-implemented DESCRIPTION "The atmfM4NeSuppressZeroStats object is not supported." VARIATION atmfM4IfType ACCESS not-implemented DESCRIPTION "The atmfM4IfType object is not supported." VARIATION atmfM4IfSubscriberAddress ACCESS not-implemented DESCRIPTION "The atmfM4IfSubscriberAddress object is not supported." VARIATION atmfM4IfPreferredCarrier ACCESS not-implemented DESCRIPTION "The atmfM4IfPreferredCarrier object is not supported." VARIATION atmfM4IfFarEndCarrierNetwork ACCESS not-implemented DESCRIPTION "The IfFarEndCarrierNetwork object is not supported." VARIATION atmfM4VclSegEndPt ACCESS read-only DESCRIPTION "An atmfM4VclEntry cannot be created/modified via SNMP." SUPPORTS Juniper-UNI-ATM-MIB INCLUDES { juniAtmGroup6, juniAtmAal5Group, juniAtmSubIfGroup4, juniAtmVpPingControlGroup, juniAtmVcPingControlGroup, juniAtmPingTrapGroup, juniAtmSvcGroup2, juniAtmF4OamCircuitGroup } ::= { juniAtmVccEndPointAgent 6 } juniAtmVccEndPointAgentV7 AGENT-CAPABILITIES PRODUCT-RELEASE "Version 7 of the ATM VCC end point agent subcomponent of the JUNOSe SNMP agent. This version of the ATM end point subcomponent was supported in JUNOSe 5.2 system release." STATUS obsolete DESCRIPTION "The MIBs supported by the SNMP agent for the ATM application in JUNOSe. These capabilitie became obsolete when support was added to export ATM sub-interface descriptions to the line cards." SUPPORTS ATM-MIB INCLUDES { atmInterfaceTCGroup, aal5VccGroup, atmInterfaceConfGroup2, atmVccTerminationGroup2 } VARIATION atmVclAdminStatus ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclReceiveTrafficDescrIndex ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclTransmitTrafficDescrIndex ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVccAalType ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclRowStatus ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclCastType ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclConnKind ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." SUPPORTS ATM2-MIB INCLUDES { atmCommonGroup, atmHostGroup } VARIATION atmVplLogicalPortDef ACCESS not-implemented DESCRIPTION "The atmVplLogicalPortTable is not supported." VARIATION atmVplLogicalPortIndex ACCESS not-implemented DESCRIPTION "The atmVplLogicalPortTable is not supported." VARIATION atmCurrentlyFailingPVplTimeStamp ACCESS not-implemented DESCRIPTION "The atmCurrentlyFailingPVplTable is not supported." VARIATION atmCurrentlyFailingPVclTimeStamp ACCESS not-implemented DESCRIPTION "The atmCurrentlyFailingPVclTable is not supported." VARIATION atmVclAddrType ACCESS not-implemented DESCRIPTION "The atmVclAddrTable is not supported." VARIATION atmVclAddrRowStatus ACCESS not-implemented DESCRIPTION "The atmVclAddrTable is not supported." VARIATION atmAddrVclAddrType ACCESS not-implemented DESCRIPTION "The atmAddrVclTable is not supported." VARIATION atmVclGenSigDescrIndex ACCESS not-implemented DESCRIPTION "The atmVclGenTable is not supported." SUPPORTS ATM-FORUM-SNMP-M4-MIB INCLUDES { atmfM4General, atmfM4AtmLayerGroup, atmfM4VpTestGroup, atmfM4VcTestGroup } VARIATION atmfM4NeVersion ACCESS not-implemented DESCRIPTION "The atmfM4NeVersion object is not supported." VARIATION atmfM4NeStartTime ACCESS not-implemented DESCRIPTION "The atmfM4NeStartTime object is not supported." VARIATION atmfM4NeAlarmSeverityIndex ACCESS not-implemented DESCRIPTION "The atmfM4NeAlarmSeverityIndex is not supported." VARIATION atmfM4NeSuppressZeroStats ACCESS not-implemented DESCRIPTION "The atmfM4NeSuppressZeroStats object is not supported." VARIATION atmfM4IfType ACCESS not-implemented DESCRIPTION "The atmfM4IfType object is not supported." VARIATION atmfM4IfSubscriberAddress ACCESS not-implemented DESCRIPTION "The atmfM4IfSubscriberAddress object is not supported." VARIATION atmfM4IfPreferredCarrier ACCESS not-implemented DESCRIPTION "The atmfM4IfPreferredCarrier object is not supported." VARIATION atmfM4IfFarEndCarrierNetwork ACCESS not-implemented DESCRIPTION "The IfFarEndCarrierNetwork object is not supported." VARIATION atmfM4VclSegEndPt ACCESS read-only DESCRIPTION "An atmfM4VclEntry cannot be created/modified via SNMP." SUPPORTS Juniper-UNI-ATM-MIB INCLUDES { juniAtmGroup6, juniAtmAal5Group, juniAtmSubIfGroup4, juniAtmVpPingControlGroup, juniAtmVcPingControlGroup, juniAtmPingTrapGroup, juniAtmSvcGroup2, juniAtmF4OamCircuitGroup, juniAtmLocationGroup } ::= { juniAtmVccEndPointAgent 7 } juniAtmVccEndPointAgentV8 AGENT-CAPABILITIES PRODUCT-RELEASE "Version 8 of the ATM VCC end point agent subcomponent of the JUNOSe SNMP agent. This version of the ATM end point subcomponent was supported in JUNOSe 5.3 and 6.0 system releases." STATUS obsolete DESCRIPTION "The MIBs supported by the SNMP agent for the ATM application in JUNOSe. These capabilities became obsolete when ATM bulk configuration profile override was introduced." SUPPORTS ATM-MIB INCLUDES { atmInterfaceTCGroup, aal5VccGroup, atmInterfaceConfGroup2, atmVccTerminationGroup2 } VARIATION atmVclAdminStatus ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclReceiveTrafficDescrIndex ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclTransmitTrafficDescrIndex ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVccAalType ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclRowStatus ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclCastType ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclConnKind ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." SUPPORTS ATM2-MIB INCLUDES { atmCommonGroup, atmHostGroup } VARIATION atmVplLogicalPortDef ACCESS not-implemented DESCRIPTION "The atmVplLogicalPortTable is not supported." VARIATION atmVplLogicalPortIndex ACCESS not-implemented DESCRIPTION "The atmVplLogicalPortTable is not supported." VARIATION atmCurrentlyFailingPVplTimeStamp ACCESS not-implemented DESCRIPTION "The atmCurrentlyFailingPVplTable is not supported." VARIATION atmCurrentlyFailingPVclTimeStamp ACCESS not-implemented DESCRIPTION "The atmCurrentlyFailingPVclTable is not supported." VARIATION atmVclAddrType ACCESS not-implemented DESCRIPTION "The atmVclAddrTable is not supported." VARIATION atmVclAddrRowStatus ACCESS not-implemented DESCRIPTION "The atmVclAddrTable is not supported." VARIATION atmAddrVclAddrType ACCESS not-implemented DESCRIPTION "The atmAddrVclTable is not supported." VARIATION atmVclGenSigDescrIndex ACCESS not-implemented DESCRIPTION "The atmVclGenTable is not supported." SUPPORTS ATM-FORUM-SNMP-M4-MIB INCLUDES { atmfM4General, atmfM4AtmLayerGroup, atmfM4VpTestGroup, atmfM4VcTestGroup } VARIATION atmfM4NeVersion ACCESS not-implemented DESCRIPTION "The atmfM4NeVersion object is not supported." VARIATION atmfM4NeStartTime ACCESS not-implemented DESCRIPTION "The atmfM4NeStartTime object is not supported." VARIATION atmfM4NeAlarmSeverityIndex ACCESS not-implemented DESCRIPTION "The atmfM4NeAlarmSeverityIndex is not supported." VARIATION atmfM4NeSuppressZeroStats ACCESS not-implemented DESCRIPTION "The atmfM4NeSuppressZeroStats object is not supported." VARIATION atmfM4IfType ACCESS not-implemented DESCRIPTION "The atmfM4IfType object is not supported." VARIATION atmfM4IfSubscriberAddress ACCESS not-implemented DESCRIPTION "The atmfM4IfSubscriberAddress object is not supported." VARIATION atmfM4IfPreferredCarrier ACCESS not-implemented DESCRIPTION "The atmfM4IfPreferredCarrier object is not supported." VARIATION atmfM4IfFarEndCarrierNetwork ACCESS not-implemented DESCRIPTION "The IfFarEndCarrierNetwork object is not supported." VARIATION atmfM4VclSegEndPt ACCESS read-only DESCRIPTION "An atmfM4VclEntry cannot be created/modified via SNMP." SUPPORTS Juniper-UNI-ATM-MIB INCLUDES { juniAtmGroup6, juniAtmAal5Group, juniAtmSubIfGroup5, juniAtmVpPingControlGroup, juniAtmVcPingControlGroup, juniAtmPingTrapGroup, juniAtmSvcGroup2, juniAtmF4OamCircuitGroup, juniAtmLocationGroup } ::= { juniAtmVccEndPointAgent 8 } juniAtmVccEndPointAgentV9 AGENT-CAPABILITIES PRODUCT-RELEASE "Version 9 of the ATM VCC end point agent subcomponent of the JUNOSe SNMP agent. This version of the ATM end point subcomponent was supported in JUNOSe 6.1 system release." STATUS obsolete DESCRIPTION "The MIBs supported by the SNMP agent for the ATM application in JUNOSe. These capabilities became obsolete when ATM bulk configuration profile override was introduced." SUPPORTS ATM-MIB INCLUDES { atmInterfaceTCGroup, aal5VccGroup, atmInterfaceConfGroup2, atmVccTerminationGroup2 } VARIATION atmVclAdminStatus ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclReceiveTrafficDescrIndex ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclTransmitTrafficDescrIndex ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVccAalType ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclRowStatus ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclCastType ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclConnKind ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." SUPPORTS ATM2-MIB INCLUDES { atmCommonGroup, atmHostGroup } VARIATION atmVplLogicalPortDef ACCESS not-implemented DESCRIPTION "The atmVplLogicalPortTable is not supported." VARIATION atmVplLogicalPortIndex ACCESS not-implemented DESCRIPTION "The atmVplLogicalPortTable is not supported." VARIATION atmCurrentlyFailingPVplTimeStamp ACCESS not-implemented DESCRIPTION "The atmCurrentlyFailingPVplTable is not supported." VARIATION atmCurrentlyFailingPVclTimeStamp ACCESS not-implemented DESCRIPTION "The atmCurrentlyFailingPVclTable is not supported." VARIATION atmVclAddrType ACCESS not-implemented DESCRIPTION "The atmVclAddrTable is not supported." VARIATION atmVclAddrRowStatus ACCESS not-implemented DESCRIPTION "The atmVclAddrTable is not supported." VARIATION atmAddrVclAddrType ACCESS not-implemented DESCRIPTION "The atmAddrVclTable is not supported." VARIATION atmVclGenSigDescrIndex ACCESS not-implemented DESCRIPTION "The atmVclGenTable is not supported." SUPPORTS ATM-FORUM-SNMP-M4-MIB INCLUDES { atmfM4General, atmfM4AtmLayerGroup, atmfM4VpTestGroup, atmfM4VcTestGroup } VARIATION atmfM4NeVersion ACCESS not-implemented DESCRIPTION "The atmfM4NeVersion object is not supported." VARIATION atmfM4NeStartTime ACCESS not-implemented DESCRIPTION "The atmfM4NeStartTime object is not supported." VARIATION atmfM4NeAlarmSeverityIndex ACCESS not-implemented DESCRIPTION "The atmfM4NeAlarmSeverityIndex is not supported." VARIATION atmfM4NeSuppressZeroStats ACCESS not-implemented DESCRIPTION "The atmfM4NeSuppressZeroStats object is not supported." VARIATION atmfM4IfType ACCESS not-implemented DESCRIPTION "The atmfM4IfType object is not supported." VARIATION atmfM4IfSubscriberAddress ACCESS not-implemented DESCRIPTION "The atmfM4IfSubscriberAddress object is not supported." VARIATION atmfM4IfPreferredCarrier ACCESS not-implemented DESCRIPTION "The atmfM4IfPreferredCarrier object is not supported." VARIATION atmfM4IfFarEndCarrierNetwork ACCESS not-implemented DESCRIPTION "The IfFarEndCarrierNetwork object is not supported." VARIATION atmfM4VclSegEndPt ACCESS read-only DESCRIPTION "An atmfM4VclEntry cannot be created/modified via SNMP." SUPPORTS Juniper-UNI-ATM-MIB INCLUDES { juniAtmGroup7, juniAtmAal5Group, juniAtmSubIfGroup5, juniAtmVpPingControlGroup, juniAtmVcPingControlGroup, juniAtmPingTrapGroup, juniAtmSvcGroup2, juniAtmF4OamCircuitGroup, juniAtmLocationGroup } ::= { juniAtmVccEndPointAgent 9 } juniAtmVccEndPointAgentV10 AGENT-CAPABILITIES PRODUCT-RELEASE "Version 10 of the ATM VCC end point agent subcomponent of the JUNOSe SNMP agent. This version of the ATM end point subcomponent is supported in JUNOSe 7.0 and subsequent system releases." STATUS obsolete DESCRIPTION "The MIBs supported by the SNMP agent for the ATM application in JUNOSe.These capabilities became obsolete when ATM VP Statistics was introduced." SUPPORTS ATM-MIB INCLUDES { atmInterfaceTCGroup, aal5VccGroup, atmInterfaceConfGroup2, atmVccTerminationGroup2 } VARIATION atmVclAdminStatus ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclReceiveTrafficDescrIndex ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclTransmitTrafficDescrIndex ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVccAalType ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclRowStatus ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclCastType ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclConnKind ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." SUPPORTS ATM2-MIB INCLUDES { atmCommonGroup, atmHostGroup } VARIATION atmVplLogicalPortDef ACCESS not-implemented DESCRIPTION "The atmVplLogicalPortTable is not supported." VARIATION atmVplLogicalPortIndex ACCESS not-implemented DESCRIPTION "The atmVplLogicalPortTable is not supported." VARIATION atmCurrentlyFailingPVplTimeStamp ACCESS not-implemented DESCRIPTION "The atmCurrentlyFailingPVplTable is not supported." VARIATION atmCurrentlyFailingPVclTimeStamp ACCESS not-implemented DESCRIPTION "The atmCurrentlyFailingPVclTable is not supported." VARIATION atmVclAddrType ACCESS not-implemented DESCRIPTION "The atmVclAddrTable is not supported." VARIATION atmVclAddrRowStatus ACCESS not-implemented DESCRIPTION "The atmVclAddrTable is not supported." VARIATION atmAddrVclAddrType ACCESS not-implemented DESCRIPTION "The atmAddrVclTable is not supported." VARIATION atmVclGenSigDescrIndex ACCESS not-implemented DESCRIPTION "The atmVclGenTable is not supported." SUPPORTS ATM-FORUM-SNMP-M4-MIB INCLUDES { atmfM4General, atmfM4AtmLayerGroup, atmfM4VpTestGroup, atmfM4VcTestGroup } VARIATION atmfM4NeVersion ACCESS not-implemented DESCRIPTION "The atmfM4NeVersion object is not supported." VARIATION atmfM4NeStartTime ACCESS not-implemented DESCRIPTION "The atmfM4NeStartTime object is not supported." VARIATION atmfM4NeAlarmSeverityIndex ACCESS not-implemented DESCRIPTION "The atmfM4NeAlarmSeverityIndex is not supported." VARIATION atmfM4NeSuppressZeroStats ACCESS not-implemented DESCRIPTION "The atmfM4NeSuppressZeroStats object is not supported." VARIATION atmfM4IfType ACCESS not-implemented DESCRIPTION "The atmfM4IfType object is not supported." VARIATION atmfM4IfSubscriberAddress ACCESS not-implemented DESCRIPTION "The atmfM4IfSubscriberAddress object is not supported." VARIATION atmfM4IfPreferredCarrier ACCESS not-implemented DESCRIPTION "The atmfM4IfPreferredCarrier object is not supported." VARIATION atmfM4IfFarEndCarrierNetwork ACCESS not-implemented DESCRIPTION "The IfFarEndCarrierNetwork object is not supported." VARIATION atmfM4VclSegEndPt ACCESS read-only DESCRIPTION "An atmfM4VclEntry cannot be created/modified via SNMP." SUPPORTS Juniper-UNI-ATM-MIB INCLUDES { juniAtmGroup8, juniAtmAal5Group, juniAtmSubIfGroup5, juniAtmVpPingControlGroup, juniAtmVcPingControlGroup, juniAtmPingTrapGroup, juniAtmSvcGroup2, juniAtmF4OamCircuitGroup, juniAtmLocationGroup } ::= { juniAtmVccEndPointAgent 10 } juniAtmVccEndPointAgentV11 AGENT-CAPABILITIES PRODUCT-RELEASE "Version 11 of the ATM VCC end point agent subcomponent of the JUNOSe SNMP agent. This version of the ATM end point subcomponent is supported in JUNOSe 7.1 and 7.2 system releases." STATUS obsolete DESCRIPTION "The MIBs supported by the SNMP agent for the ATM application in JUNOSe. These capabilities became obsolete when SVC support was removed." SUPPORTS ATM-MIB INCLUDES { atmInterfaceTCGroup, aal5VccGroup, atmInterfaceConfGroup2, atmVccTerminationGroup2 } VARIATION atmVclAdminStatus ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclReceiveTrafficDescrIndex ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclTransmitTrafficDescrIndex ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVccAalType ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclRowStatus ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclCastType ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclConnKind ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." SUPPORTS ATM2-MIB INCLUDES { atmCommonGroup, atmHostGroup } VARIATION atmVplLogicalPortDef ACCESS not-implemented DESCRIPTION "The atmVplLogicalPortTable is not supported." VARIATION atmVplLogicalPortIndex ACCESS not-implemented DESCRIPTION "The atmVplLogicalPortTable is not supported." VARIATION atmCurrentlyFailingPVplTimeStamp ACCESS not-implemented DESCRIPTION "The atmCurrentlyFailingPVplTable is not supported." VARIATION atmCurrentlyFailingPVclTimeStamp ACCESS not-implemented DESCRIPTION "The atmCurrentlyFailingPVclTable is not supported." VARIATION atmVclAddrType ACCESS not-implemented DESCRIPTION "The atmVclAddrTable is not supported." VARIATION atmVclAddrRowStatus ACCESS not-implemented DESCRIPTION "The atmVclAddrTable is not supported." VARIATION atmAddrVclAddrType ACCESS not-implemented DESCRIPTION "The atmAddrVclTable is not supported." VARIATION atmVclGenSigDescrIndex ACCESS not-implemented DESCRIPTION "The atmVclGenTable is not supported." SUPPORTS ATM-FORUM-SNMP-M4-MIB INCLUDES { atmfM4General, atmfM4AtmLayerGroup, atmfM4VpTestGroup, atmfM4VcTestGroup } VARIATION atmfM4NeVersion ACCESS not-implemented DESCRIPTION "The atmfM4NeVersion object is not supported." VARIATION atmfM4NeStartTime ACCESS not-implemented DESCRIPTION "The atmfM4NeStartTime object is not supported." VARIATION atmfM4NeAlarmSeverityIndex ACCESS not-implemented DESCRIPTION "The atmfM4NeAlarmSeverityIndex is not supported." VARIATION atmfM4NeSuppressZeroStats ACCESS not-implemented DESCRIPTION "The atmfM4NeSuppressZeroStats object is not supported." VARIATION atmfM4IfType ACCESS not-implemented DESCRIPTION "The atmfM4IfType object is not supported." VARIATION atmfM4IfSubscriberAddress ACCESS not-implemented DESCRIPTION "The atmfM4IfSubscriberAddress object is not supported." VARIATION atmfM4IfPreferredCarrier ACCESS not-implemented DESCRIPTION "The atmfM4IfPreferredCarrier object is not supported." VARIATION atmfM4IfFarEndCarrierNetwork ACCESS not-implemented DESCRIPTION "The IfFarEndCarrierNetwork object is not supported." VARIATION atmfM4VclSegEndPt ACCESS read-only DESCRIPTION "An atmfM4VclEntry cannot be created/modified via SNMP." SUPPORTS Juniper-UNI-ATM-MIB INCLUDES { juniAtmGroup8, juniAtmAal5Group, juniAtmSubIfGroup6, juniAtmVpPingControlGroup, juniAtmVcPingControlGroup, juniAtmPingTrapGroup, juniAtmSvcGroup2, juniAtmF4OamCircuitGroup2, juniAtmLocationGroup, juniAtmVpStatsGroup } ::= { juniAtmVccEndPointAgent 11 } juniAtmVccEndPointAgentV12 AGENT-CAPABILITIES PRODUCT-RELEASE "Version 12 of the ATM VCC end point agent subcomponent of the JUNOSe SNMP agent. This version of the ATM end point subcomponent is supported in JUNOSe 7.3 and subsequent system releases." STATUS current DESCRIPTION "The MIBs supported by the SNMP agent for the ATM application in JUNOSe." SUPPORTS ATM-MIB INCLUDES { atmInterfaceTCGroup, aal5VccGroup, atmInterfaceConfGroup2, atmVccTerminationGroup2 } VARIATION atmVclAdminStatus ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclReceiveTrafficDescrIndex ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclTransmitTrafficDescrIndex ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVccAalType ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclRowStatus ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclCastType ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." VARIATION atmVclConnKind ACCESS read-only DESCRIPTION "The atmVccTerminationGroup2 is not used for configuring VCCs. Use the Juniper-UNI-ATM-MIB." SUPPORTS ATM2-MIB INCLUDES { atmCommonGroup, atmHostGroup } VARIATION atmSigSSCOPConEvents ACCESS not-implemented DESCRIPTION "The atmSigStatTable is not supported." VARIATION atmSigSSCOPErrdPdus ACCESS not-implemented DESCRIPTION "The atmSigStatTable is not supported." VARIATION atmSigDetectSetupAttempts ACCESS not-implemented DESCRIPTION "The atmSigStatTable is not supported." VARIATION atmSigEmitSetupAttempts ACCESS not-implemented DESCRIPTION "The atmSigStatTable is not supported." VARIATION atmSigDetectUnavailRoutes ACCESS not-implemented DESCRIPTION "The atmSigStatTable is not supported." VARIATION atmSigEmitUnavailRoutes ACCESS not-implemented DESCRIPTION "The atmSigStatTable is not supported." VARIATION atmSigDetectUnavailResrcs ACCESS not-implemented DESCRIPTION "The atmSigStatTable is not supported." VARIATION atmSigEmitUnavailResrcs ACCESS not-implemented DESCRIPTION "The atmSigStatTable is not supported." VARIATION atmSigDetectCldPtyEvents ACCESS not-implemented DESCRIPTION "The atmSigStatTable is not supported." VARIATION atmSigEmitCldPtyEvents ACCESS not-implemented DESCRIPTION "The atmSigStatTable is not supported." VARIATION atmSigDetectMsgErrors ACCESS not-implemented DESCRIPTION "The atmSigStatTable is not supported." VARIATION atmSigEmitMsgErrors ACCESS not-implemented DESCRIPTION "The atmSigStatTable is not supported." VARIATION atmSigDetectClgPtyEvents ACCESS not-implemented DESCRIPTION "The atmSigStatTable is not supported." VARIATION atmSigEmitClgPtyEvents ACCESS not-implemented DESCRIPTION "The atmSigStatTable is not supported." VARIATION atmSigDetectTimerExpireds ACCESS not-implemented DESCRIPTION "The atmSigStatTable is not supported." VARIATION atmSigEmitTimerExpireds ACCESS not-implemented DESCRIPTION "The atmSigStatTable is not supported." VARIATION atmSigDetectRestarts ACCESS not-implemented DESCRIPTION "The atmSigStatTable is not supported." VARIATION atmSigEmitRestarts ACCESS not-implemented DESCRIPTION "The atmSigStatTable is not supported." VARIATION atmSigInEstabls ACCESS not-implemented DESCRIPTION "The atmSigStatTable is not supported." VARIATION atmSigOutEstabls ACCESS not-implemented DESCRIPTION "The atmSigStatTable is not supported." VARIATION atmVplLogicalPortDef ACCESS not-implemented DESCRIPTION "The atmVplLogicalPortTable is not supported." VARIATION atmVplLogicalPortIndex ACCESS not-implemented DESCRIPTION "The atmVplLogicalPortTable is not supported." VARIATION atmInterfaceConfMaxSvpcVpi ACCESS not-implemented DESCRIPTION "The atmInterfaceConfMaxSvpcVpi is not supported." VARIATION atmInterfaceCurrentMaxSvpcVpi ACCESS not-implemented DESCRIPTION "The atmInterfaceCurrentMaxSvpcVpi is not supported." VARIATION atmInterfaceConfMaxSvccVpi ACCESS not-implemented DESCRIPTION "The atmInterfaceConfMaxSvccVpi is not supported." VARIATION atmInterfaceCurrentMaxSvccVpi ACCESS not-implemented DESCRIPTION "The atmInterfaceCurrentMaxSvccVpi is not supported." VARIATION atmInterfaceConfMinSvccVci ACCESS not-implemented DESCRIPTION "The atmInterfaceConfMinSvccVci is not supported." VARIATION atmInterfaceCurrentMinSvccVci ACCESS not-implemented DESCRIPTION "The atmInterfaceCurrentMinSvccVci is not supported." VARIATION atmIntfSigVccRxTrafficDescrIndex ACCESS not-implemented DESCRIPTION "The atmIntfSigVccRxTrafficDescrIndex is not supported." VARIATION atmIntfSigVccTxTrafficDescrIndex ACCESS not-implemented DESCRIPTION "The atmIntfSigVccTxTrafficDescrIndex is not supported." VARIATION atmIntfLeafSetupFailures ACCESS not-implemented DESCRIPTION "The atmIntfLeafSetupFailures is not supported." VARIATION atmIntfLeafSetupRequests ACCESS not-implemented DESCRIPTION "The atmIntfLeafSetupRequests is not supported." VARIATION atmCurrentlyFailingPVplTimeStamp ACCESS not-implemented DESCRIPTION "The atmCurrentlyFailingPVplTable is not supported." VARIATION atmCurrentlyFailingPVclTimeStamp ACCESS not-implemented DESCRIPTION "The atmCurrentlyFailingPVclTable is not supported." VARIATION atmVclAddrType ACCESS not-implemented DESCRIPTION "The atmVclAddrTable is not supported." VARIATION atmVclAddrRowStatus ACCESS not-implemented DESCRIPTION "The atmVclAddrTable is not supported." VARIATION atmAddrVclAddrType ACCESS not-implemented DESCRIPTION "The atmAddrVclTable is not supported." VARIATION atmVclGenSigDescrIndex ACCESS not-implemented DESCRIPTION "The atmVclGenTable is not supported." SUPPORTS ATM-FORUM-SNMP-M4-MIB INCLUDES { atmfM4General, atmfM4AtmLayerGroup, atmfM4VpTestGroup, atmfM4VcTestGroup } VARIATION atmfM4NeVersion ACCESS not-implemented DESCRIPTION "The atmfM4NeVersion object is not supported." VARIATION atmfM4NeStartTime ACCESS not-implemented DESCRIPTION "The atmfM4NeStartTime object is not supported." VARIATION atmfM4NeAlarmSeverityIndex ACCESS not-implemented DESCRIPTION "The atmfM4NeAlarmSeverityIndex is not supported." VARIATION atmfM4NeSuppressZeroStats ACCESS not-implemented DESCRIPTION "The atmfM4NeSuppressZeroStats object is not supported." VARIATION atmfM4IfType ACCESS not-implemented DESCRIPTION "The atmfM4IfType object is not supported." VARIATION atmfM4IfSubscriberAddress ACCESS not-implemented DESCRIPTION "The atmfM4IfSubscriberAddress object is not supported." VARIATION atmfM4IfPreferredCarrier ACCESS not-implemented DESCRIPTION "The atmfM4IfPreferredCarrier object is not supported." VARIATION atmfM4IfFarEndCarrierNetwork ACCESS not-implemented DESCRIPTION "The IfFarEndCarrierNetwork object is not supported." VARIATION atmfM4VclSegEndPt ACCESS read-only DESCRIPTION "An atmfM4VclEntry cannot be created/modified via SNMP." SUPPORTS Juniper-UNI-ATM-MIB INCLUDES { juniAtmGroup8, juniAtmAal5Group, juniAtmSubIfGroup7, juniAtmVpPingControlGroup, juniAtmVcPingControlGroup, juniAtmPingTrapGroup, juniAtmSvcGroup2, juniAtmF4OamCircuitGroup2, juniAtmLocationGroup, juniAtmVpStatsGroup } ::= { juniAtmVccEndPointAgent 12 } -- ***************************************************************************** -- ATM VP tunnel agent capabilities -- ***************************************************************************** juniAtmVpTunnelAgent OBJECT IDENTIFIER ::= { juniAtmAgent 2 } juniAtmVpTunnelAgentV1 AGENT-CAPABILITIES PRODUCT-RELEASE "Version 1 of the ATM VP tunnel subcomponent of the JUNOSe SNMP agent. This version of the ATM tunnel subcomponent is supported in JUNOSe 3.0 and subsequent system releases." STATUS current DESCRIPTION "The MIB supported by the SNMP agent for the ATM application in JUNOSe." SUPPORTS Juniper-UNI-ATM-MIB INCLUDES { juniAtmVpTunnelGroup } ::= { juniAtmVpTunnelAgent 1 } -- ***************************************************************************** -- ATM NBMA interface agent capabilities -- ***************************************************************************** juniAtmNbmaAgent OBJECT IDENTIFIER ::= { juniAtmAgent 3 } juniAtmNbmaAgentV1 AGENT-CAPABILITIES PRODUCT-RELEASE "Version 1 of the ATM NBMA interface subcomponent of the JUNOSe SNMP agent. This version of the ATM NBMA subcomponent is supported in JUNOSe 3.2 and subsequent system releases." STATUS current DESCRIPTION "The MIB supported by the SNMP agent for the ATM application in JUNOSe." SUPPORTS Juniper-UNI-ATM-MIB INCLUDES { juniAtmNbmaMapGroup } ::= { juniAtmNbmaAgent 1 } -- ***************************************************************************** -- ATM Switch agent capabilities -- -- This is a placeholder for the agent capabilities for the ATM switch (cross -- connect) subcomponent of the JUNOSe SNMP agent. -- The ATM switch subcomponent has not been supported in a released product. -- ***************************************************************************** juniAtmSwitchAgent OBJECT IDENTIFIER ::= { juniAtmAgent 4 } juniAtmSwitchAgentV1 OBJECT IDENTIFIER ::= { juniAtmSwitchAgent 1 } -- Obsolete juniAtmSwitchAgentV2 OBJECT IDENTIFIER ::= { juniAtmSwitchAgent 2 } -- Obsolete -- ***************************************************************************** -- ATM traffic shaping agent capabilities -- ***************************************************************************** juniAtmTrafficShapingAgent OBJECT IDENTIFIER ::= { juniAtmAgent 5 } juniAtmTrafficShapingAgentV1 AGENT-CAPABILITIES PRODUCT-RELEASE "Version 1 of the ATM traffic shaping subcomponent of the JUNOSe SNMP agent. This version of the ATM traffic shaping subcomponent is supported in JUNOSe 3.3 and subsequent system releases." STATUS current DESCRIPTION "The MIB supported by the SNMP agent for the ATM application in JUNOSe." SUPPORTS Juniper-UNI-ATM-MIB INCLUDES { juniAtmTrafficShapingGroup } ::= { juniAtmTrafficShapingAgent 1 } END