-- ***************************************************************************** -- JUNIPER-SUBSCRIBER-MIB -- -- Juniper Networks Enterprise MIB -- Subscriber MIB -- -- Copyright (c) 2010-2013, Juniper Networks, Inc. -- All rights reserved. -- ***************************************************************************** JUNIPER-SUBSCRIBER-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress, Unsigned32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString, MacAddress FROM SNMPv2-TC InterfaceIndex FROM IF-MIB CounterBasedGauge64 -- RFC 2856 FROM HCNUM-TC jnxSubscriberMibRoot FROM JUNIPER-SMI; jnxSubscriberMIB MODULE-IDENTITY LAST-UPDATED "201312130000Z" -- 20-Dec-13 ORGANIZATION "Juniper Networks, Inc." CONTACT-INFO " Juniper Technical Assistance Center Juniper Networks, Inc. 1194 N. Mathilda Avenue Sunnyvale, CA 94089 E-mail: support@juniper.net" DESCRIPTION "The Subscriber MIB for the Juniper Networks enterprise." -- Revision History REVISION "201005110000Z" -- 11-May-10 DESCRIPTION "Initial version of jnxSubscriberMIB module." REVISION "201205020000Z" -- 02-May-12 DESCRIPTION "Updated related to subscriber accounting session id." REVISION "201312130000Z" -- 20-Dec-13 DESCRIPTION "Added jnxSubscriberAccountingTable MIB." REVISION "201411030000Z" -- 03-Nov-14 DESCRIPTION "Added jnxSubscriberPicCountTable and jnxSubscriberSlotCountTable." ::= { jnxSubscriberMibRoot 1 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Textual conventions -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ JnxSubscriberState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The set of possible AAA subscriber states, expressed as a bit map: init INIT state only configured CONFIGURED state only active ACTIVE state only terminated TERMINATED state only terminating TERMINATING state only unknown Unknown state " SYNTAX INTEGER { init(0), configured(1), active(2), terminating(3), terminated(4), unknown(5) } JnxSubscriberClientType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The set of possible AAA subscriber client types: none None of the following dhcp DHCP clients only l2tp L2TP clients only ppp PPP clients only pppoe PPPoE clients only vlan VLAN clients only generic Generic clients only mobileIp Mobile Ip clients only vplsPw VPLS pseudowires only static Static clients only mlppp MLPPP clients only " SYNTAX BITS { none(0), dhcp(1), vlan(2), generic(3), mobileIp(4), vplsPw(5), ppp(6), ppppoe(7), l2tp(8), static(9), mlppp(10) } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Managed object groups -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ jnxSubscriberObjects OBJECT IDENTIFIER ::= {jnxSubscriberMIB 1} jnxSubscriberGeneral OBJECT IDENTIFIER ::= {jnxSubscriberObjects 1} jnxSubscriberLogicalSystemObjects OBJECT IDENTIFIER ::= {jnxSubscriberObjects 2} jnxSubscriberRoutingInstanceObjects OBJECT IDENTIFIER ::= {jnxSubscriberObjects 3} -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Managed objects for Subscriber functions -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ jnxSubscriberTotalCount OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of subscribers." ::= { jnxSubscriberGeneral 1 } jnxSubscriberActiveCount OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of active subscribers." ::= { jnxSubscriberGeneral 2 } jnxSubscriberTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxSubscriberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entries in this table represent subscribers." ::= { jnxSubscriberGeneral 3 } jnxSubscriberInterfaceHardwareIndexTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxSubscriberInterfaceHardwareIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entries in this table represent subscribers Interface Hardware Index." ::= { jnxSubscriberGeneral 4 } jnxSubscriberPortCountTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxSubscriberPortCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The entries in this table represent each port. Each entry contains the port name and the number of active subscribers present on that port." ::= { jnxSubscriberGeneral 5 } jnxSubscriberAccountingTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxSubscriberAccountingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entries in this table represent subscribers with accounting." ::= { jnxSubscriberGeneral 6 } jnxSubscriberAccountingTotalCount OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of subscribers with accounting." ::= { jnxSubscriberGeneral 7 } jnxSubscriberPicCountTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxSubscriberPicCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The entries in this table represent each PIC. Each entry contains the PIC name and the number of active subscribers present on that PIC." ::= { jnxSubscriberGeneral 8 } jnxSubscriberSlotCountTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxSubscriberSlotCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The entries in this table represent each slot. Each entry contains the slot name and the number of active subscribers present on that slot." ::= { jnxSubscriberGeneral 9 } jnxSubscriberInterfaceHardwareIndexEntry OBJECT-TYPE SYNTAX JnxSubscriberInterfaceHardwareIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A specification of subscribers." INDEX { jnxSubscriberInterfaceHardwareIndexHandleHiWord, jnxSubscriberInterfaceHardwareIndexHandleLoWord } ::= { jnxSubscriberInterfaceHardwareIndexTable 1 } JnxSubscriberInterfaceHardwareIndexEntry ::= SEQUENCE { jnxSubscriberInterfaceHardwareIndexHandleHiWord Unsigned32, jnxSubscriberInterfaceHardwareIndexHandleLoWord Unsigned32, jnxSubscriberInterfaceHardwareIndex Unsigned32 } jnxSubscriberInterfaceHardwareIndexHandleHiWord OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The subscriber handle associated with this subscriber. A subscriber handle is a monotonically increasing number. This object is equal to the most significant 32 bit of the 64 bit subscriber id." ::= { jnxSubscriberInterfaceHardwareIndexEntry 1 } jnxSubscriberInterfaceHardwareIndexHandleLoWord OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The subscriber handle associated with this subscriber. A subscriber handle is a monotonically increasing number. This object is equal to the least significant 32 bit of the 64 bit subscriber id." ::= { jnxSubscriberInterfaceHardwareIndexEntry 2} jnxSubscriberInterfaceHardwareIndex OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The subscriber interface hardware index." ::= { jnxSubscriberInterfaceHardwareIndexEntry 3} jnxSubscriberEntry OBJECT-TYPE SYNTAX JnxSubscriberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A specification of subscribers." INDEX { jnxSubscriberHandleHiWord, jnxSubscriberHandleLoWord } ::= { jnxSubscriberTable 1 } JnxSubscriberEntry ::= SEQUENCE { jnxSubscriberHandleHiWord Unsigned32, jnxSubscriberHandleLoWord Unsigned32, jnxSubscriberUserName DisplayString, jnxSubscriberClientType JnxSubscriberClientType, jnxSubscriberIpAddress IpAddress, jnxSubscriberIpAddressMask IpAddress, jnxSubscriberLogicalSystem OCTET STRING, jnxSubscriberRoutingInstance OCTET STRING, jnxSubscriberInterface DisplayString, jnxSubscriberInterfaceType INTEGER, jnxSubscriberMacAddress MacAddress, jnxSubscriberState JnxSubscriberState, jnxSubscriberLoginTime DisplayString, jnxSubscriberAcctSessionId DisplayString } jnxSubscriberHandleHiWord OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The subscriber handle associated with this subscriber. A subscriber handle is a monotonically increasing number. This object is equal to the most significant 32 bit of the 64 bit subscriber id." ::= { jnxSubscriberEntry 1 } jnxSubscriberHandleLoWord OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The subscriber handle associated with this subscriber. A subscriber handle is a monotonically increasing number. This object is equal to the least significant 32 bit of the 64 bit subscriber id." ::= { jnxSubscriberEntry 2} jnxSubscriberUserName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The userName associated with this subscriber." ::= { jnxSubscriberEntry 3 } jnxSubscriberClientType OBJECT-TYPE SYNTAX JnxSubscriberClientType MAX-ACCESS read-only STATUS current DESCRIPTION "The client type for this subscriber." ::= { jnxSubscriberEntry 4 } jnxSubscriberIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The client IP Address assigned to this subscriber." ::= { jnxSubscriberEntry 5 } jnxSubscriberIpAddressMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The client IP Address Mask assigned to this subscriber." ::= { jnxSubscriberEntry 6 } jnxSubscriberLogicalSystem OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "The logical system associated with this subscriber." ::= { jnxSubscriberEntry 7 } jnxSubscriberRoutingInstance OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The routing instance associated with this subscriber." ::= { jnxSubscriberEntry 8 } jnxSubscriberInterface OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The textual name of the interface associated with this subscriber." ::= { jnxSubscriberEntry 9 } jnxSubscriberInterfaceType OBJECT-TYPE SYNTAX INTEGER { none(0), static(1), dynamic(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the interface associated with this subscriber." ::= { jnxSubscriberEntry 10 } jnxSubscriberMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address of the interface associated with this subscriber." ::= { jnxSubscriberEntry 11 } jnxSubscriberState OBJECT-TYPE SYNTAX JnxSubscriberState MAX-ACCESS read-only STATUS current DESCRIPTION "The state of this subscriber." ::= { jnxSubscriberEntry 12 } jnxSubscriberLoginTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The time this subscriber logged in to the server." ::= { jnxSubscriberEntry 13 } jnxSubscriberAcctSessionId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The accounting session id associated with this subscriber." ::= { jnxSubscriberEntry 14 } jnxSubscriberPortCountEntry OBJECT-TYPE SYNTAX JnxSubscriberPortCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A specification of Port containing the port name and the number of active subscribers on that port" INDEX { jnxSubscriberPort } ::= { jnxSubscriberPortCountTable 1 } JnxSubscriberPortCountEntry ::= SEQUENCE { jnxSubscriberPort DisplayString, jnxSubscriberPortTunneledCounter CounterBasedGauge64, jnxSubscriberPortTerminatedCounter CounterBasedGauge64 } jnxSubscriberPort OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of the port in string" ::= { jnxSubscriberPortCountEntry 1 } jnxSubscriberPortTunneledCounter OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of active Tunneled subscribers present on the port" ::= { jnxSubscriberPortCountEntry 2 } jnxSubscriberPortTerminatedCounter OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of active Tunneled subscribers present on the port" ::= { jnxSubscriberPortCountEntry 3 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Subscriber information by logical system -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ jnxSubscriberLogicalSystemTotalCount OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of total subscribers on the logical system." ::= { jnxSubscriberLogicalSystemObjects 1 } jnxSubscriberLogicalSystemActiveCount OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of active subscribers on the logical system." ::= { jnxSubscriberLogicalSystemObjects 2 } jnxSubscriberLogicalSystemTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxSubscriberLogicalSystemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entries in this table sort subscribers within the logical system. The logical system name must be provided in the SNMP query. The logical system will be identified by either the context field in V3 requests, or it will be encoded in the community string in V1 or V2c requests. User can query for logical-system/routing-instance specific data by prefixing the community string with /@, where '@' acts as a separator between community name and routing-instance name. If no logical system is specified, this table shows data for the default logical system. The name of the routing instance is ignored for this table." ::= { jnxSubscriberLogicalSystemObjects 3 } jnxSubscriberLogicalSystemEntry OBJECT-TYPE SYNTAX JnxSubscriberLogicalSystemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A specification of subscribers within the logical system." INDEX { jnxSubscriberLogicalSystemHandleHiWord, jnxSubscriberLogicalSystemHandleLoWord } ::= { jnxSubscriberLogicalSystemTable 1 } JnxSubscriberLogicalSystemEntry ::= SEQUENCE { jnxSubscriberLogicalSystemHandleHiWord Unsigned32, jnxSubscriberLogicalSystemHandleLoWord Unsigned32, jnxSubscriberLogicalSystemState JnxSubscriberState } jnxSubscriberLogicalSystemHandleHiWord OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The subscriber handle associated with this subscriber. A subscriber handle is a monotonically increasing number. This object is equal to the most significant 32 bit of the 64 bit subscriber id." ::= { jnxSubscriberLogicalSystemEntry 1 } jnxSubscriberLogicalSystemHandleLoWord OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The subscriber handle associated with this subscriber. A subscriber handle is a monotonically increasing number. This object is equal to the least significant 32 bit of the 64 bit subscriber id." ::= { jnxSubscriberLogicalSystemEntry 2 } jnxSubscriberLogicalSystemState OBJECT-TYPE SYNTAX JnxSubscriberState MAX-ACCESS read-only STATUS current DESCRIPTION "The state of this subscriber." ::= { jnxSubscriberLogicalSystemEntry 3 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Subscriber information by routing instance -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ jnxSubscriberRoutingInstanceTotalCount OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of total subscribers on the routing instance." ::= { jnxSubscriberRoutingInstanceObjects 1 } jnxSubscriberRoutingInstanceActiveCount OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of active subscribers on the routing instance." ::= { jnxSubscriberRoutingInstanceObjects 2 } jnxSubscriberRoutingInstanceTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxSubscriberRoutingInstanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entries in this table sort subscribers within routing instance. The routing instance name must be provided in the SNMP query. The routing instance will be identified by either the context field in V3 requests, or it will be encoded in the community string in V1 or V2c requests. User can query for logical-system/routing-instance specific data by prefixing the community string with /@, where '@' acts as a separator between community name and routing-instance name. If no routing instance is specified, this table shows data for the default routing instance. The name of the logical system is ignored for this table." ::= { jnxSubscriberRoutingInstanceObjects 3 } jnxSubscriberRoutingInstanceEntry OBJECT-TYPE SYNTAX JnxSubscriberRoutingInstanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A specification of subscribers within routing instance." INDEX { jnxSubscriberRoutingInstanceHandleHiWord, jnxSubscriberRoutingInstanceHandleLoWord } ::= { jnxSubscriberRoutingInstanceTable 1 } JnxSubscriberRoutingInstanceEntry ::= SEQUENCE { jnxSubscriberRoutingInstanceHandleHiWord Unsigned32, jnxSubscriberRoutingInstanceHandleLoWord Unsigned32, jnxSubscriberRoutingInstanceState JnxSubscriberState } jnxSubscriberRoutingInstanceHandleHiWord OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The subscriber handle associated with this subscriber. A subscriber handle is a monotonically increasing number. This object is equal to the most significant 32 bit of the 64 bit subscriber id." ::= { jnxSubscriberRoutingInstanceEntry 1 } jnxSubscriberRoutingInstanceHandleLoWord OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The subscriber handle associated with this subscriber. A subscriber handle is a monotonically increasing number. This object is equal to the least significant 32 bit of the 64 bit subscriber id." ::= { jnxSubscriberRoutingInstanceEntry 2 } jnxSubscriberRoutingInstanceState OBJECT-TYPE SYNTAX JnxSubscriberState MAX-ACCESS read-only STATUS current DESCRIPTION "The state of this subscriber." ::= { jnxSubscriberRoutingInstanceEntry 3 } jnxSubscriberAccountingEntry OBJECT-TYPE SYNTAX JnxSubscriberAccountingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A specification of subscribers with Accounting." INDEX { jnxSubscriberAccountingHandleHiWord, jnxSubscriberAccountingHandleLoWord } ::= { jnxSubscriberAccountingTable 1 } JnxSubscriberAccountingEntry ::= SEQUENCE { jnxSubscriberAccountingHandleHiWord Unsigned32, jnxSubscriberAccountingHandleLoWord Unsigned32, jnxSubscriberAccountingUserName DisplayString, jnxSubscriberAccountingClientType JnxSubscriberClientType, jnxSubscriberAccountingIpAddress IpAddress, jnxSubscriberAccountingIpAddressMask IpAddress, jnxSubscriberAccountingLogicalSystem OCTET STRING, jnxSubscriberAccountingRoutingInstance OCTET STRING, jnxSubscriberAccountingInterface DisplayString, jnxSubscriberAccountingInterfaceType INTEGER, jnxSubscriberAccountingMacAddress MacAddress, jnxSubscriberAccountingState JnxSubscriberState, jnxSubscriberAccountingLoginTime DisplayString, jnxSubscriberAccountingAcctSessionId DisplayString } jnxSubscriberAccountingHandleHiWord OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The subscriber handle associated with this subscriber. A subscriber handle is a monotonically increasing number. This object is equal to the most significant 32 bit of the 64 bit subscriber id." ::= { jnxSubscriberAccountingEntry 1 } jnxSubscriberAccountingHandleLoWord OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The subscriber handle associated with this subscriber. A subscriber handle is a monotonically increasing number. This object is equal to the least significant 32 bit of the 64 bit subscriber id." ::= { jnxSubscriberAccountingEntry 2} jnxSubscriberAccountingUserName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The userName associated with this subscriber." ::= { jnxSubscriberAccountingEntry 3 } jnxSubscriberAccountingClientType OBJECT-TYPE SYNTAX JnxSubscriberClientType MAX-ACCESS read-only STATUS current DESCRIPTION "The client type for this subscriber." ::= { jnxSubscriberAccountingEntry 4 } jnxSubscriberAccountingIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The client IP Address assigned to this subscriber." ::= { jnxSubscriberAccountingEntry 5 } jnxSubscriberAccountingIpAddressMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The client IP Address Mask assigned to this subscriber." ::= { jnxSubscriberAccountingEntry 6 } jnxSubscriberAccountingLogicalSystem OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "The logical system associated with this subscriber." ::= { jnxSubscriberAccountingEntry 7 } jnxSubscriberAccountingRoutingInstance OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The routing instance associated with this subscriber." ::= { jnxSubscriberAccountingEntry 8 } jnxSubscriberAccountingInterface OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The textual name of the interface associated with this subscriber." ::= { jnxSubscriberAccountingEntry 9 } jnxSubscriberAccountingInterfaceType OBJECT-TYPE SYNTAX INTEGER { none(0), static(1), dynamic(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the interface associated with this subscriber." ::= { jnxSubscriberAccountingEntry 10 } jnxSubscriberAccountingMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address of the interface associated with this subscriber." ::= { jnxSubscriberAccountingEntry 11 } jnxSubscriberAccountingState OBJECT-TYPE SYNTAX JnxSubscriberState MAX-ACCESS read-only STATUS current DESCRIPTION "The state of this subscriber." ::= { jnxSubscriberAccountingEntry 12 } jnxSubscriberAccountingLoginTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The time this subscriber logged in to the server." ::= { jnxSubscriberAccountingEntry 13 } jnxSubscriberAccountingAcctSessionId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The accounting session id associated with this subscriber." ::= { jnxSubscriberAccountingEntry 14 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- PIC Count Table -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ jnxSubscriberPicCountEntry OBJECT-TYPE SYNTAX JnxSubscriberPicCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A specification of Pic containing the PIC name and the number of active subscribers on that PIC" INDEX { jnxSubscriberPic } ::= { jnxSubscriberPicCountTable 1 } JnxSubscriberPicCountEntry ::= SEQUENCE { jnxSubscriberPic DisplayString, jnxSubscriberPicTotalCounter CounterBasedGauge64 } jnxSubscriberPic OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of the PIC in string" ::= { jnxSubscriberPicCountEntry 1 } jnxSubscriberPicTotalCounter OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of active subscribers present on the PIC" ::= { jnxSubscriberPicCountEntry 2 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Slot Count Table -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ jnxSubscriberSlotCountEntry OBJECT-TYPE SYNTAX JnxSubscriberSlotCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A specification of Slot containing the slot name and the number of active subscribers on that slot" INDEX { jnxSubscriberSlot } ::= { jnxSubscriberSlotCountTable 1 } JnxSubscriberSlotCountEntry ::= SEQUENCE { jnxSubscriberSlot DisplayString, jnxSubscriberSlotTotalCounter CounterBasedGauge64 } jnxSubscriberSlot OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of the slot in string" ::= { jnxSubscriberSlotCountEntry 1 } jnxSubscriberSlotTotalCounter OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of active subscribers present on the slot" ::= { jnxSubscriberSlotCountEntry 2 } END