-- -- Juniper Enterprise Specific MIB: RMON MIB Extension -- -- Copyright (c) 2001-2006, Juniper Networks, Inc. -- All rights reserved. -- -- The contents of this document are subject to change without notice. -- JUNIPER-RMON-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, TimeTicks, NOTIFICATION-TYPE FROM SNMPv2-SMI alarmEntry, alarmIndex, alarmVariable FROM RMON-MIB jnxMibs, jnxRmonTraps FROM JUNIPER-SMI; jnxRmon MODULE-IDENTITY LAST-UPDATED "200511230000Z" -- Wed Nov 23 00:00:00 2005 UTC ORGANIZATION "Juniper Networks, Inc." CONTACT-INFO " Juniper Technical Assistance Center Juniper Networks, Inc. 1194 N. Mathilda Avenue Sunnyvale, CA 94089 E-mail: support@juniper.net" DESCRIPTION "The MIB modules extends the Rmon as defined in RMON-MIB." REVISION "200511230000Z" DESCRIPTION "Updated jnxRmonAlarmGetFailReason enum." REVISION "200201100000Z" DESCRIPTION "Initial revision." ::= { jnxMibs 13 } -- -- This table augments the rmon alarmTable -- jnxRmonAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxRmonAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Extensions to the rmon Alarm Table" ::= { jnxRmon 1 } jnxRmonAlarmEntry OBJECT-TYPE SYNTAX JnxRmonAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry containing additional management information applicable to a particular rmon alarm entry." AUGMENTS { alarmEntry } ::= { jnxRmonAlarmTable 1 } JnxRmonAlarmEntry ::= SEQUENCE { jnxRmonAlarmGetFailCnt Counter32, jnxRmonAlarmGetFailTime TimeTicks, jnxRmonAlarmGetFailReason INTEGER, jnxRmonAlarmGetOkTime TimeTicks, jnxRmonAlarmState INTEGER } jnxRmonAlarmGetFailCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the internal get request for the variable monitored by this entry has failed." ::= { jnxRmonAlarmEntry 1 } jnxRmonAlarmGetFailTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when an internal get request for the variable monitored by this entry last failed." ::= { jnxRmonAlarmEntry 2 } jnxRmonAlarmGetFailReason OBJECT-TYPE SYNTAX INTEGER { other (1), noError (2), noSuchObject (3), outOfView (4), noSuchInstance (5), badReqId (6), oidMatchErr (7), oidBindErr (8), createPktErr (9), badObjType (10), processRestarted (11), lostInstance (12) } MAX-ACCESS read-only STATUS current DESCRIPTION "The reason why an internal get request for the variable monitored by this entry last failed." ::= { jnxRmonAlarmEntry 3 } jnxRmonAlarmGetOkTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when an internal get request for the variable monitored by this entry succeeded and the entry left the getFailure state." ::= { jnxRmonAlarmEntry 4 } jnxRmonAlarmState OBJECT-TYPE SYNTAX INTEGER { unknown (1), underCreation (2), active (3), startup (4), risingThreshold (5), fallingThreshold (6), getFailure (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of this rmon alarm entry. The states and their definitions are: underCreation ... entry has not been activated active ... entry is active & within thresholds startup ... entry still waiting for 1st value risingThreshold ... entry has crossed the rising threshold fallingThreshold... entry has crossed the falling threshold getFailure ... internal get request failed" ::= { jnxRmonAlarmEntry 5 } -- -- define branches for jnx rmon traps -- -- Note that we need jnxRmonTrapPrefix with the 0 -- sub-identifier to make this MIB translate to -- an SNMPv1 format in a reversible way. For example -- it is needed for proxies that convert SNMPv1 traps -- to SNMPv2 notifications without MIB knowledge. -- jnxRmonTrapPrefix OBJECT IDENTIFIER ::= { jnxRmonTraps 0 } jnxRmonAlarmGetFailure NOTIFICATION-TYPE OBJECTS { alarmIndex, alarmVariable, jnxRmonAlarmGetFailReason } STATUS current DESCRIPTION "The SNMP trap that is generated when the get request for an alarm variable returns an error. The specific error is identified by jnxRmonAlarmGetFailReason." ::= { jnxRmonTrapPrefix 1 } jnxRmonGetOk NOTIFICATION-TYPE OBJECTS { alarmIndex, alarmVariable } STATUS current DESCRIPTION "The SNMP trap that is generated when the get request for an alarm variable is successful. This is only sent after previous attempts were unsuccessful." ::= { jnxRmonTrapPrefix 2 } END