-- ================================================================== -- Copyright (C) 2002 by HUAWEI TECHNOLOGIES. All rights reserved. -- -- Description: HUAWEI Lan Switch Rstp MIB -- Reference: -- Version: V1.4 -- History: --(1) Created by Zhangshilin, 2001.06.29 --(2) Revised by Qi Zhenglin, 2002.01.08 -- V1.1 2004-10-12 updated by gaolong -- Import TEXTUAL-CONVENTION, OBJECT-IDENTITY, NOTIFICATION-TYPE. -- Relocate hwLswRstpMib MODULE-IDENTITY clause. -- Substitute chinese characters with English words. -- Change MAX-ACCESS clause value of hwdot1dStpClearStatistics and -- hwdot1dSetStpDefaultPortCost from write-only to read-write. -- V1.2 2004-11-10 add hwdot1dStpRXTCBPDU by xuboning -- V1.3 2004-12-21 add hwdot1dStpPortSendingBPDUType, hwdot1dStpOperPortPointToPoint, -- change hwdot1dStpPortPointToPoint by zhuchaopeng -- V1.4 2005-07-04 modify hwdot1dStpPathCostStandard by zhanghaihong -- adjust file format by gaolong -- ================================================================== -- ================================================================== -- -- Varibles and types be imported -- -- ================================================================== HUAWEI-LswRSTP-MIB DEFINITIONS ::= BEGIN IMPORTS TruthValue, MacAddress, TEXTUAL-CONVENTION FROM SNMPv2-TC MODULE-IDENTITY,OBJECT-TYPE,Counter32, OBJECT-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI dot1dStpPortEntry, dot1dStpPort FROM BRIDGE-MIB lswCommon FROM HUAWEI-3COM-OID-MIB; hwLswRstpMib MODULE-IDENTITY LAST-UPDATED "200106290000Z" ORGANIZATION "" CONTACT-INFO "" DESCRIPTION "" REVISION "200106290000Z" DESCRIPTION "" ::= { lswCommon 6 } EnabledStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A simple status value for the object." SYNTAX INTEGER { enabled(1), disabled(2) } -- ================================================================== -- -- ======================= definition begin ========================= -- -- ================================================================== hwLswRstpMibObject OBJECT IDENTIFIER ::= { hwLswRstpMib 1 } hwdot1dStpStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION " Bridge STP enabled/disabled state" ::= { hwLswRstpMibObject 1 } hwdot1dStpForceVersion OBJECT-TYPE SYNTAX INTEGER { stp(0), rstp(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Running mode of the bridge RSTP state machine" ::= { hwLswRstpMibObject 2 } hwdot1dStpDiameter OBJECT-TYPE SYNTAX INTEGER (1..7) MAX-ACCESS read-write STATUS current DESCRIPTION " Permitted amount of bridges between any two ends on the network." ::= { hwLswRstpMibObject 3 } hwdot1dStpRootBridgeAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION " MAC address of the root bridge" ::= { hwLswRstpMibObject 4 } hwDot1dStpBpduGuard OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION " If BPDU guard enabled. The edge port will discard illegal BPDU when enabled" ::= { hwLswRstpMibObject 6 } hwDot1dStpRootType OBJECT-TYPE SYNTAX INTEGER { normal (1), primary (2), secondary (3) } MAX-ACCESS read-write STATUS current DESCRIPTION " Root type of the bridge" ::= { hwLswRstpMibObject 7 } hwDot1dTimeOutFactor OBJECT-TYPE SYNTAX INTEGER (3..7) MAX-ACCESS read-write STATUS current DESCRIPTION " Time Out Factor of the bridge." ::= { hwLswRstpMibObject 8 } hwDot1dStpPathCostStandard OBJECT-TYPE SYNTAX INTEGER { dot1d-1998 (1), dot1t (2), legacy (3) } MAX-ACCESS read-write STATUS current DESCRIPTION " Path Cost Standard of the bridge. Value 'dot1d-1998' is IEEE 802.1d standard in 1998, value 'dot1t' is IEEE 802.1t standard, and value 'legacy' is a private legacy standard." ::= { hwLswRstpMibObject 9 } hwdot1dStpPortXTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDot1dStpPortXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "RSTP extended information of the port " ::= { hwLswRstpMibObject 5 } hwdot1dStpPortXEntry OBJECT-TYPE SYNTAX HwDot1dStpPortXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " RSTP extended information of the port " AUGMENTS { dot1dStpPortEntry } ::= { hwdot1dStpPortXTable 1 } HwDot1dStpPortXEntry ::= SEQUENCE { hwdot1dStpPortStatus EnabledStatus , hwdot1dStpPortEdgeport TruthValue , hwdot1dStpPortPointToPoint INTEGER , hwdot1dStpMcheck TruthValue , hwdot1dStpTransLimit INTEGER , hwdot1dStpRXStpBPDU Counter32 , hwdot1dStpTXStpBPDU Counter32 , hwdot1dStpRXTCNBPDU Counter32 , hwdot1dStpTXTCNBPDU Counter32 , hwdot1dStpRXRSTPBPDU Counter32 , hwdot1dStpTXRSTPBPDU Counter32 , hwdot1dStpClearStatistics INTEGER , hwdot1dSetStpDefaultPortCost INTEGER , hwdot1dStpRootGuard EnabledStatus , hwdot1dStpLoopGuard EnabledStatus, hwdot1dStpPortBlockedReason INTEGER , hwdot1dStpRXTCBPDU Counter32 , hwdot1dStpPortSendingBPDUType INTEGER, hwdot1dStpOperPortPointToPoint INTEGER } hwdot1dStpPortStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION " RSTP status of the port" ::= { hwdot1dStpPortXEntry 1 } hwdot1dStpPortEdgeport OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " Whether the port can be an edge port" ::= { hwdot1dStpPortXEntry 2 } hwdot1dStpPortPointToPoint OBJECT-TYPE SYNTAX INTEGER { forceTrue (1), forceFalse (2), auto (3) } MAX-ACCESS read-write STATUS current DESCRIPTION " It is the administrative value indicates whether the port can be connected to a point-to-point link or not. If the value is 'auto', the operative value of a point-to-point link state is determined by device itself, and can be read from hwdot1dStpOperPortPointToPoint." ::= { hwdot1dStpPortXEntry 3 } hwdot1dStpMcheck OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " Check if the port transfer state machine enters" ::= { hwdot1dStpPortXEntry 4 } hwdot1dStpTransLimit OBJECT-TYPE SYNTAX INTEGER(1..255) MAX-ACCESS read-write STATUS current DESCRIPTION " Packet transmission limit of the bridge in a duration of Hello Time." ::= { hwdot1dStpPortXEntry 5 } hwdot1dStpRXStpBPDU OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of STP BPDU received " ::= { hwdot1dStpPortXEntry 6 } hwdot1dStpTXStpBPDU OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of STP BPDU transmitted " ::= { hwdot1dStpPortXEntry 7 } hwdot1dStpRXTCNBPDU OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of TCN BPDU received " ::= { hwdot1dStpPortXEntry 8 } hwdot1dStpTXTCNBPDU OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of TCN BPDU transmitted " ::= { hwdot1dStpPortXEntry 9 } hwdot1dStpRXRSTPBPDU OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of RSTP BPDU received" ::= { hwdot1dStpPortXEntry 10 } hwdot1dStpTXRSTPBPDU OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of RSTP BPDU transmitted " ::= { hwdot1dStpPortXEntry 11 } hwdot1dStpClearStatistics OBJECT-TYPE SYNTAX INTEGER {clear(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Clear RSTP statistics. Read operation not supported. " ::= { hwdot1dStpPortXEntry 12 } hwdot1dSetStpDefaultPortCost OBJECT-TYPE SYNTAX INTEGER {enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set PathCost back to the default setting. Read operation not supported." ::= { hwdot1dStpPortXEntry 13 } hwdot1dStpRootGuard OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION " If the port guard root bridge. Other bridge which want to be root can not become root through this port if enabled. " ::= { hwdot1dStpPortXEntry 14 } hwdot1dStpLoopGuard OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION " Loop guard function that keep a root port or an alternate port in discarding state while the information on the port is aged out." ::= { hwdot1dStpPortXEntry 15 } hwdot1dStpPortBlockedReason OBJECT-TYPE SYNTAX INTEGER { notBlock (1), blockForProtocol (2), blockForRootGuard (3), blockForBPDUGuard (4), blockForLoopGuard (5) } MAX-ACCESS read-only STATUS current DESCRIPTION " Record the block reason of the port. notBlock (1) means that the port is not in block state,. blockForProtocol (2) means that the port is blocked by stp protocol to avoid loop. blockForRootGuard(3) means that the root guard flag of bridge is set and a better message received from the port,and the port is blocked. blockForBPDUGuard(4) means that the port has been configured as an edge port and receive a BPDU and thus blocked. blockForLoopGuard(5) means that the port is blocked for loopguarded. " ::= { hwdot1dStpPortXEntry 16 } hwdot1dStpRXTCBPDU OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of received TC BPDUs " ::= { hwdot1dStpPortXEntry 17 } hwdot1dStpPortSendingBPDUType OBJECT-TYPE SYNTAX INTEGER { stp(0), rstp(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " Type of BPDU which the port is sending. " ::= { hwdot1dStpPortXEntry 18 } hwdot1dStpOperPortPointToPoint OBJECT-TYPE SYNTAX INTEGER { true (1), false (2) } MAX-ACCESS read-only STATUS current DESCRIPTION " This object indicates whether the port has connected to a point-to-point link or not. The administrative value should be read from hwdot1dStpPortPointToPoint. " ::= { hwdot1dStpPortXEntry 19 } hwRstpEventsV2 OBJECT-IDENTITY STATUS current DESCRIPTION "Definition point for RSTP notifications." ::= { hwLswRstpMibObject 0 } hwRstpBpduGuarded NOTIFICATION-TYPE OBJECTS { dot1dStpPort } STATUS current DESCRIPTION "The SNMP trap that is generated when an edged port of the BPDU-guard switch recevies BPDU packets." ::= { hwRstpEventsV2 1 } hwRstpRootGuarded NOTIFICATION-TYPE OBJECTS { dot1dStpPort } STATUS current DESCRIPTION "The SNMP trap that is generated when a root-guard port receives a superior bpdu." ::= { hwRstpEventsV2 2 } hwRstpBridgeLostRootPrimary NOTIFICATION-TYPE STATUS current DESCRIPTION "The SNMP trap that is generated when the bridge is no longer the root bridge of the spanning tree. Another switch with higher priority has already been the root bridge. " ::= { hwRstpEventsV2 3 } hwRstpLoopGuarded NOTIFICATION-TYPE OBJECTS { dot1dStpPort } STATUS current DESCRIPTION "The SNMP trap that is generated when a loop-guard port is aged out ." ::= { hwRstpEventsV2 4 } hwdot1dStpIgnoredVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDot1dStpIgnoredVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "RSTP extended information of vlan " ::= { hwLswRstpMibObject 10 } hwdot1dStpIgnoredVlanEntry OBJECT-TYPE SYNTAX HwDot1dStpIgnoredVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " RSTP extended information of the vlan " INDEX { hwdot1dVlan } ::= { hwdot1dStpIgnoredVlanTable 1 } HwDot1dStpIgnoredVlanEntry ::= SEQUENCE { hwdot1dVlan INTEGER , hwdot1dStpIgnore INTEGER } hwdot1dVlan OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION " Vlan id supported" ::= { hwdot1dStpIgnoredVlanEntry 1 } hwdot1dStpIgnore OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Whether the vlan is stp Ignored" ::= { hwdot1dStpIgnoredVlanEntry 2 } END