-- ===================================================================== -- Copyright (c) 2004-2012 Hangzhou H3C Tech. Co., Ltd. All rights reserved. -- -- Description: LACP extend MIB -- Reference: -- Version: V1.7 -- History: -- V1.0 Initial version -- V1.1 2004-10-12 updated by gaolong -- Remove OID comments. -- Change MAX-ACCESS clause value of hwAggLinkNumber to accessible-for-notify -- because this index object is used when sending notification. -- Fix a default value error of hwAggResourceAllocationValue. -- V1.2 2004-10-25 updated by fuzhenyu -- Change the range of hwAggLinkNumber from (1..256) to (1..728) -- Change the size of hwAggPortNotAttachedString from (1..50) to (1..255) -- V1.3 2006-03-05 updated by zhangjian -- Edit the description of hwAggPortNotAttachedReason. -- Change value range of hwAggLinkNumber. -- V1.4 2006-11-15 updated by zhangjian -- Change MAX-ACCESS clause of hwAggPortIndex to accessible-for-notify. -- Add hwAggPortInactiveNotification2 and hwAggPortActiveNotification. -- V1.5 2009-10-09 updated by songjianyong -- Change value range of hwAggPortNotAttachedReason. -- V1.6 2010-03-26 updated by songjianyong -- Change value range of hwAggPortNotAttachedReason. -- V1.7 2011-10-12 updated by liyugang -- Change some descriptions. -- ===================================================================== HUAWEI-LAG-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF Integer32, Gauge32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI DisplayString, RowStatus,TruthValue,TEXTUAL-CONVENTION FROM SNMPv2-TC huaweiMgmt, huaweiDatacomm FROM HUAWEI-3COM-OID-MIB PortList FROM Q-BRIDGE-MIB; hwLAG MODULE-IDENTITY LAST-UPDATED "200310091942Z" -- October 09, 2003 at 19:42 GMT ORGANIZATION "Hangzhou H3C Tech. Co., Ltd." CONTACT-INFO "Platform Team Hangzhou H3C Tech. Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip:100085" DESCRIPTION "LACP extend MIB." ::= { huaweiDatacomm 25 } -- -- Node definitions -- hwLAGMibObjects OBJECT IDENTIFIER ::= { hwLAG 1 } hwAggLinkTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAggLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of aggregate link objects." ::= { hwLAGMibObjects 1 } hwAggLinkEntry OBJECT-TYPE SYNTAX HwAggLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of table." INDEX { hwAggLinkNumber } ::= { hwAggLinkTable 1 } HwAggLinkEntry ::= SEQUENCE { hwAggLinkNumber Integer32, hwAggLinkName DisplayString, hwAggLinkMode INTEGER, hwAggLinkPortList PortList, hwAggLinkState RowStatus, hwAggPortListSelectedPorts PortList, hwAggPortListSamePartnerPorts PortList } hwAggLinkNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The serial number of aggregation group." ::= { hwAggLinkEntry 1 } hwAggLinkName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "Aggregation name." ::= { hwAggLinkEntry 2 } hwAggLinkMode OBJECT-TYPE SYNTAX INTEGER { manual(1), static(2), dynamic(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Type of aggregation. manual: Manual aggregation, no LACP. static: Membership specified by user, LACP is used to validate. dynamic: Completely dynamic aggregation detected by LACP." ::= { hwAggLinkEntry 3 } hwAggLinkPortList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-create STATUS current DESCRIPTION "List of ports in this link aggregation group, by bridge port number. If the mode of the link aggregation group is manual or static, you can update this list to your hearts content. However, if the link aggregation group is dynamic, the system will maintain it. You are not permitted to set the value of this to all zeroes." ::= { hwAggLinkEntry 4 } hwAggLinkState OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus, now support three states: createAndGo, active, destroy." ::= { hwAggLinkEntry 5 } hwAggPortListSelectedPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "A PortList of physical ports that have been selected but not attached to this aggregator. When the bit is set to 1,it means the corresponding port is in the portlist." ::= { hwAggLinkEntry 6 } hwAggPortListSamePartnerPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "PortList of physical ports that have the same Actor SystemID and partner systemID as this aggregator, but have different actor and partner keys of aggregator." ::= { hwAggLinkEntry 7 } hwAggPortTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAggPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of aggregate port objects." ::= { hwLAGMibObjects 2 } hwAggPortEntry OBJECT-TYPE SYNTAX HwAggPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of table." INDEX { hwAggPortIndex } ::= { hwAggPortTable 1 } HwAggPortEntry ::= SEQUENCE { hwAggPortIndex Gauge32, hwAggPortNotAttachedReason Integer32, hwAggPortLacpState TruthValue, hwAggPortNotAttachedString DisplayString } hwAggPortIndex OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Port ifindex which is according to RFC1213 MIB." ::= { hwAggPortEntry 1 } hwAggPortNotAttachedReason OBJECT-TYPE SYNTAX Integer32 (0..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Reason why this port is selected for an aggregator but not attached, 0: The port is attached to this aggregator. 1: The current number of active ports has reached the upper limit. 2: All aggregation resources are already in-use. 3: The port's configuration is improper for being attached. 4: The port's partner is improper for being attached. 5: The number of current active ports has not reached the lower limit. 6: The port's physical state (down) is improper for being attached. 7: The port is not selected for an aggregator. 8: The port's hardware restriction is improper for being attached. 9: The port's speed is improper for being attached. 10: The port's duplex mode is improper for being attached." ::= { hwAggPortEntry 2 } hwAggPortLacpState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Control ports' lacp enble or disable." ::= { hwAggPortEntry 3 } hwAggPortNotAttachedString OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "The string which interprets this port is selected for an aggregator but not attached." ::= { hwAggPortEntry 4 } hwAggResourceAllocationValue OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "The priority value calculated to decide which aggregations have first call on the load-sharing aggregation resources in the hardware. It depends on the aggregation type and total speed." DEFVAL { "0" } ::= { hwLAGMibObjects 3 } hwLAGMibNotifications OBJECT IDENTIFIER ::= { hwLAG 2 } hwAggSpeedChangedNotification NOTIFICATION-TYPE OBJECTS { hwAggLinkNumber } STATUS current DESCRIPTION "This event will be triggered whenever an aggregation changes its speed." ::= { hwLAGMibNotifications 1 } hwAggPortInactiveNotification NOTIFICATION-TYPE OBJECTS { hwAggLinkNumber } STATUS current DESCRIPTION "This event will be triggered whenever any port in aggregator is made inactive." ::= { hwLAGMibNotifications 2 } hwAggPortInactiveNotification2 NOTIFICATION-TYPE OBJECTS { hwAggLinkNumber, hwAggPortIndex } STATUS current DESCRIPTION "This event will be triggered whenever the port in aggregator is made inactive." ::= { hwLAGMibNotifications 3 } hwAggPortActiveNotification NOTIFICATION-TYPE OBJECTS { hwAggLinkNumber, hwAggPortIndex } STATUS current DESCRIPTION "This event will be triggered whenever the port in aggregator is made active." ::= { hwLAGMibNotifications 4 } hwLAGMibConformance OBJECT IDENTIFIER ::= { hwLAG 3 } hwLAGMibCompliances OBJECT IDENTIFIER ::= { hwLAGMibConformance 1 } hwLAGMibCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which implement the Lag MIB." MODULE -- this module MANDATORY-GROUPS { hwLAGMibObjectGroup, hwLAGMibNotificationGroup } ::= { hwLAGMibCompliances 1 } hwLAGMibGroup OBJECT IDENTIFIER ::= { hwLAGMibConformance 2 } hwLAGMibObjectGroup OBJECT-GROUP OBJECTS { hwAggLinkName, hwAggLinkMode, hwAggLinkPortList, hwAggLinkState, hwAggPortListSelectedPorts, hwAggPortListSamePartnerPorts, hwAggPortNotAttachedReason, hwAggPortLacpState, hwAggPortNotAttachedString, hwAggResourceAllocationValue } STATUS current DESCRIPTION "The collection of objects which are used to represent LAG objects." ::= { hwLAGMibGroup 1 } hwLAGMibNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { hwAggSpeedChangedNotification, hwAggPortInactiveNotification, hwAggPortInactiveNotification2, hwAggPortActiveNotification } STATUS current DESCRIPTION "The collection of objects which are used to represent notifications." ::= { hwLAGMibGroup 2 } END