-- ================================================================== -- Copyright (C) 2007 by HUAWEI TECHNOLOGIES. All rights reserved. -- -- Description: HUAWEI Private ATM Interface MIB -- Reference: -- Version: V1.0 -- History: -- V1.0 -- ================================================================== -- ================================================================== -- -- Variables and types be imported -- -- ================================================================== HUAWEI-ATM-MIB DEFINITIONS ::= BEGIN IMPORTS AtmVpIdentifier, AtmVcIdentifier FROM ATM-TC-MIB hwDatacomm FROM HUAWEI-MIB InterfaceIndex FROM IF-MIB OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF IpAddress, Integer32, OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI RowStatus, TruthValue FROM SNMPv2-TC; -- October 17, 2007 at 22:30 GMT -- October 17, 2007 at 22:30 GMT hwAtmMIB MODULE-IDENTITY LAST-UPDATED "200710172230Z" -- October 17, 2007 at 22:30 GMT ORGANIZATION "Huawei Technologies co.,Ltd." CONTACT-INFO "VRP Team Huawei Technologies co.,Ltd. Huawei Bld.,NO.3 Xinxi Rd., Shang-Di Information Industry Base, Hai-Dian District Beijing P.R. China http://www.huawei.com Zip:100085 " DESCRIPTION "This MIB is mainly used to configure the ATM OC-3/STM-1 and ATM OC-12/STM-4 interface, IPoA, IPoEoA, PVC service type, OAM F5 loopback, parameters of the VP limit, and mapping between the peer VPI and the local VPI." ::= { hwDatacomm 156 } -- -- Node definitions -- -- Node definitions -- hwAtmObjects OBJECT IDENTIFIER ::= { hwAtmMIB 1 } -- hwAtmTable Table -- hwAtmTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the parameters of the ATM interface." ::= { hwAtmObjects 1 } hwAtmEntry OBJECT-TYPE SYNTAX HwAtmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the parameters of the ATM interface." INDEX { hwAtmIfIndex } ::= { hwAtmTable 1 } HwAtmEntry ::= SEQUENCE { hwAtmIfIndex InterfaceIndex, hwAtmIfType INTEGER, hwAtmClock INTEGER, hwAtmFrameFormat INTEGER, hwAtmScramble TruthValue, hwAtmLoopback INTEGER } hwAtmIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the interface index." ::= { hwAtmEntry 1 } hwAtmIfType OBJECT-TYPE SYNTAX INTEGER { oc3OrStm1(1), oc12OrStm4(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the interface type." ::= { hwAtmEntry 11 } hwAtmClock OBJECT-TYPE SYNTAX INTEGER { master(1), slave(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Master clock: uses the internal clock signal. Slave clock: uses the line clock signal." ::= { hwAtmEntry 12 } hwAtmFrameFormat OBJECT-TYPE SYNTAX INTEGER { sdh(1), sonet(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "For the optical interface STM-1/STM-4, the frame format on the ATM interface is SDH; for the OC-3/OC-12 interface, the frame format is SONET. The default frame format is SDH." DEFVAL { sdh } ::= { hwAtmEntry 13 } hwAtmScramble OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "By default, the scramble function is enabled. The scramble function takes effect only on payload rather than cell header. true: enables the scramble function. false: disables the scramble function." DEFVAL { true } ::= { hwAtmEntry 14 } hwAtmLoopback OBJECT-TYPE SYNTAX INTEGER { local(1), remote(2), payload(3), none(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the loopback function of the channel. local: enables the local loopback on the interface. remote: enables the remote loopback on the interface. payload: enables the remote payload loopback on the interface. By default, all loopback functions are disabled." DEFVAL { none } ::= { hwAtmEntry 15 } -- hwAtmMapPvpTable table -- hwAtmMapPvpTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmMapPvpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the mapping between the peer VPI and the local VPI." ::= { hwAtmObjects 2 } hwAtmMapPvpEntry OBJECT-TYPE SYNTAX HwAtmMapPvpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the mapping between the peer VPI and the local VPI." INDEX { hwAtmMapPvpIfIndex, hwAtmMapPvpVplVpi } ::= { hwAtmMapPvpTable 1 } HwAtmMapPvpEntry ::= SEQUENCE { hwAtmMapPvpIfIndex InterfaceIndex, hwAtmMapPvpVplVpi AtmVpIdentifier, hwAtmMapPvpRemoteVplVpi AtmVpIdentifier, hwAtmMapPvpRowStatus RowStatus } hwAtmMapPvpIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the interface index." ::= { hwAtmMapPvpEntry 1 } hwAtmMapPvpVplVpi OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the local VPI value. The value is an integer ranging from 0 to 255." ::= { hwAtmMapPvpEntry 2 } hwAtmMapPvpRemoteVplVpi OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the peer VPI value. The value is an integer ranging from 0 to 255." ::= { hwAtmMapPvpEntry 11 } hwAtmMapPvpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create or delete an object." ::= { hwAtmMapPvpEntry 51 } -- hwAtmMapPvcTable table -- hwAtmMapPvcTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmMapPvcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the mapping between the peer VPI/VCI and the local VPI/VCI." ::= { hwAtmObjects 3 } hwAtmMapPvcEntry OBJECT-TYPE SYNTAX HwAtmMapPvcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the mapping between the peer VPI/VCI and the local VPI/VCI." INDEX { hwAtmVclIfIndex, hwAtmVclVpi, hwAtmVclVci } ::= { hwAtmMapPvcTable 1 } HwAtmMapPvcEntry ::= SEQUENCE { hwAtmMapPvcRemoteVclVci AtmVcIdentifier, hwAtmMapPvcRemoteVclVpi AtmVpIdentifier, hwAtmMapPvcRowStatus RowStatus } hwAtmMapPvcRemoteVclVci OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the peer VCI value. VCI is short for Virtual Channel Identifier. The VCI value ranges from 0 to 2047. Generally, the values from 0 to 31 are reserved for specail use." ::= { hwAtmMapPvcEntry 11 } hwAtmMapPvcRemoteVclVpi OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the peer VPI value. The value is an integer ranging from 0 to 255." ::= { hwAtmMapPvcEntry 12 } hwAtmMapPvcRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create or delete an object." ::= { hwAtmMapPvcEntry 51 } hwAtmServiceTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the service type and related parameters for the PVC." ::= { hwAtmObjects 4 } hwAtmServiceEntry OBJECT-TYPE SYNTAX HwAtmServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the service type for the PVC." INDEX { hwAtmServiceName } ::= { hwAtmServiceTable 1 } HwAtmServiceEntry ::= SEQUENCE { hwAtmServiceName OCTET STRING, hwAtmServiceType INTEGER, hwAtmServiceOutputPcr Integer32, hwAtmServiceOutputScr Integer32, hwAtmServiceOutputMbs Integer32, hwAtmServiceCbrCdvtValue Integer32, hwAtmServiceOutputMcr Integer32, hwAtmServiceRowStatus RowStatus } hwAtmServiceName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the name of the service type. The name is a string of 1 to 31 characters." ::= { hwAtmServiceEntry 1 } hwAtmServiceType OBJECT-TYPE SYNTAX INTEGER { cbr(1), vbrNrt(2), vbrRt(3), ubr(4), ubrPlus(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "Set the service type for the PVC as required." DEFVAL { ubr } ::= { hwAtmServiceEntry 11 } hwAtmServiceOutputPcr OBJECT-TYPE SYNTAX Integer32 (0 | 64..149760) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the peak output rate of the ATM cell. When hwPvcServiceTableType is ubr, the peak output rate is 0." DEFVAL { 149760 } ::= { hwAtmServiceEntry 12 } hwAtmServiceOutputScr OBJECT-TYPE SYNTAX Integer32 (0 | 64..149760) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the peak output rate of the ATM cell. When hwPvcServiceTableType is cbr or ubr, the peak output rate is 0." DEFVAL { 149760 } ::= { hwAtmServiceEntry 13 } hwAtmServiceOutputMbs OBJECT-TYPE SYNTAX Integer32 (0 | 1..512) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the peak output rate of the ATM cell. When hwPvcServiceTableType is cbr or ubr, the peak output rate is 0." ::= { hwAtmServiceEntry 14 } hwAtmServiceCbrCdvtValue OBJECT-TYPE SYNTAX Integer32 (0..10000) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the limit of the ATM cell delay variation. When hwPvcServiceTableType is cbr, the variable is valid. For other service types, the variable is 0." DEFVAL { 500 } ::= { hwAtmServiceEntry 15 } hwAtmServiceOutputMcr OBJECT-TYPE SYNTAX Integer32 (0 | 64..149760) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the mini width guarantee bit rate of the ATM cell. When hwPvcServiceTableType is ubr, the peak output rate is 0." DEFVAL { 149760 } ::= { hwAtmServiceEntry 16 } hwAtmServiceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create or delete an object." ::= { hwAtmServiceEntry 51 } hwAtmPvcServiceTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmPvcServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the service type for the PVC." ::= { hwAtmObjects 5 } hwAtmPvcServiceEntry OBJECT-TYPE SYNTAX HwAtmPvcServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the service type for the PVC." INDEX { hwAtmVclIfIndex, hwAtmVclVpi, hwAtmVclVci } ::= { hwAtmPvcServiceTable 1 } HwAtmPvcServiceEntry ::= SEQUENCE { hwAtmPvcServiceName OCTET STRING, hwAtmPvcTransmittalDirection INTEGER, hwAtmPvcServiceRowStatus RowStatus } hwAtmPvcServiceName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the name of the service type. The name is a string of 1 to 31 characters." ::= { hwAtmPvcServiceEntry 11 } hwAtmPvcTransmittalDirection OBJECT-TYPE SYNTAX INTEGER { input(1), output(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the input or output tpye of the service type." ::= { hwAtmPvcServiceEntry 21 } hwAtmPvcServiceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create or delete an object." ::= { hwAtmPvcServiceEntry 51 } hwAtmIfConfTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmIfConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the configuration of the ATM interface." ::= { hwAtmObjects 11 } hwAtmIfConfEntry OBJECT-TYPE SYNTAX HwAtmIfConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the configuration of the ATM interface." INDEX { hwAtmIfConfIfIndex } ::= { hwAtmIfConfTable 1 } HwAtmIfConfEntry ::= SEQUENCE { hwAtmIfConfIfIndex InterfaceIndex, hwAtmIfConfMaxVccs Integer32, hwAtmIfConfOperVccs Integer32, hwAtmIfConfIntfType INTEGER } hwAtmIfConfIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the interface index." ::= { hwAtmIfConfEntry 1 } hwAtmIfConfMaxVccs OBJECT-TYPE SYNTAX Integer32 (1..2048) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the maximum number of the PVCs." ::= { hwAtmIfConfEntry 11 } hwAtmIfConfOperVccs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of the configured PVCs." ::= { hwAtmIfConfEntry 12 } hwAtmIfConfIntfType OBJECT-TYPE SYNTAX INTEGER { uni(1), nni(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the type of the serial interface with the ATM protocol." ::= { hwAtmIfConfEntry 13 } hwAtmVplTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmVplEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the configuration of the ATM PVP." ::= { hwAtmObjects 12 } hwAtmVplEntry OBJECT-TYPE SYNTAX HwAtmVplEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the configuration of the ATM PVP." INDEX { hwAtmVplIfIndex, hwAtmVplVpi } ::= { hwAtmVplTable 1 } HwAtmVplEntry ::= SEQUENCE { hwAtmVplIfIndex InterfaceIndex, hwAtmVplVpi AtmVpIdentifier, hwAtmVplRowStatus RowStatus } hwAtmVplIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the interface index." ::= { hwAtmVplEntry 1 } hwAtmVplVpi OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI." ::= { hwAtmVplEntry 2 } hwAtmVplRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the status of the row." ::= { hwAtmVplEntry 51 } hwAtmVclTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmVclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the configuration of the ATM PVC." ::= { hwAtmObjects 13 } hwAtmVclEntry OBJECT-TYPE SYNTAX HwAtmVclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the configuration of the ATM PVC." INDEX { hwAtmVclIfIndex, hwAtmVclVpi, hwAtmVclVci } ::= { hwAtmVclTable 1 } HwAtmVclEntry ::= SEQUENCE { hwAtmVclIfIndex InterfaceIndex, hwAtmVclVpi AtmVpIdentifier, hwAtmVclVci AtmVcIdentifier, hwAtmVclName OCTET STRING, hwAtmVccAal5EncapsType INTEGER, hwAtmVclRowStatus RowStatus } hwAtmVclIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the interface index." ::= { hwAtmVclEntry 1 } hwAtmVclVpi OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI." ::= { hwAtmVclEntry 2 } hwAtmVclVci OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "VCI." ::= { hwAtmVclEntry 3 } hwAtmVclName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the name of the PVC." ::= { hwAtmVclEntry 11 } hwAtmVccAal5EncapsType OBJECT-TYPE SYNTAX INTEGER { aal5Snap(1), aal5Mux(2), aal5MuxNonstandard(3), aal5Nlpid(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the encapsulation mode of AAL5." DEFVAL { aal5snap } ::= { hwAtmVclEntry 12 } hwAtmVclRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the status of the row." ::= { hwAtmVclEntry 51 } hwAtmPvcIpoaTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmPvcIpoaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the IPoA mapping on the PVC." ::= { hwAtmObjects 14 } hwAtmPvcIpoaEntry OBJECT-TYPE SYNTAX HwAtmPvcIpoaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the IPoA mapping on the PVC." INDEX { hwAtmVclIfIndex, hwAtmVclVpi, hwAtmVclVci, hwAtmPvcIpoaType, hwAtmPvcIpoaIpAddress } ::= { hwAtmPvcIpoaTable 1 } HwAtmPvcIpoaEntry ::= SEQUENCE { hwAtmPvcIpoaType INTEGER, hwAtmPvcIpoaIpAddress IpAddress, hwAtmPvcIpoaIpMask IpAddress, hwAtmPvcIpoaInarpInterval Integer32, hwAtmPvcIpoaBroadcast TruthValue, hwAtmPvcIpoaRowStatus RowStatus } hwAtmPvcIpoaType OBJECT-TYPE SYNTAX INTEGER { ip(1), default(2), inarp(3) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the type of the PVC IPoA mapping. ip: sets the peer IP address and mask that are mapped to the PVC. default: configures a mapping with default route attributes. If no mapping of the next hop address of a packet can be found, the packet is sent over the PVC if the PVC is configured with default mapping. inarp: configures InARP on the PVC." ::= { hwAtmPvcIpoaEntry 3 } hwAtmPvcIpoaIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the peer IP address mapped to the PVC." ::= { hwAtmPvcIpoaEntry 4 } hwAtmPvcIpoaIpMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the IP address mask. The IP address mask is an optional parameter." ::= { hwAtmPvcIpoaEntry 11 } hwAtmPvcIpoaInarpInterval OBJECT-TYPE SYNTAX Integer32 (0 | 1..600) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the interval for sending InARP packets. The parameter is optional. The value ranges from 1 to 600 in seconds. If the type of the PVC IPoA mapping is IP or default, the value is 0. The default value is 1." DEFVAL { 1 } ::= { hwAtmPvcIpoaEntry 12 } hwAtmPvcIpoaBroadcast OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If a mapping with this attribute is configured on the PVC, broadcast packets on the interface where the PVC resides will be sent over the PVC." DEFVAL { false } ::= { hwAtmPvcIpoaEntry 13 } hwAtmPvcIpoaRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus." ::= { hwAtmPvcIpoaEntry 51 } hwAtmPvcBridgeTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmPvcBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the IPoEoA mapping and PPPoEoA mapping on the PVC." ::= { hwAtmObjects 15 } hwAtmPvcBridgeEntry OBJECT-TYPE SYNTAX HwAtmPvcBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the IPoEoA mapping and PPPoEoA mapping on the PVC." INDEX { hwAtmVclIfIndex, hwAtmVclVpi, hwAtmVclVci } ::= { hwAtmPvcBridgeTable 1 } HwAtmPvcBridgeEntry ::= SEQUENCE { hwAtmPvcBridgeDstIfIndex InterfaceIndex, hwAtmPvcBridgeRowStatus RowStatus } hwAtmPvcBridgeDstIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the index of the VE interface." ::= { hwAtmPvcBridgeEntry 11 } hwAtmPvcBridgeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus." ::= { hwAtmPvcBridgeEntry 51 } hwAtmPvcOamLoopbackTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmPvcOAMLoopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure OAM F5 Loopback, enable the sending of OAM F5 Loopback cells, and configure the parameters of the retransmission check or modify the parameters of the retransmission check." ::= { hwAtmObjects 17 } hwAtmPvcOAMLoopbackEntry OBJECT-TYPE SYNTAX HwAtmPvcOAMLoopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure OAM F5 Loopback." INDEX { hwAtmVclIfIndex, hwAtmVclVpi, hwAtmVclVci } ::= { hwAtmPvcOamLoopbackTable 1 } HwAtmPvcOAMLoopbackEntry ::= SEQUENCE { hwAtmPvcOAMLoopbackFrequency Integer32, hwAtmPvcOAMLoopbackUpCount Integer32, hwAtmPvcOAMLoopbackDownCount Integer32, hwAtmPvcOAMLoopbackRetryFrequency Integer32, hwAtmPvcOAMLoopbackRowStatus RowStatus } hwAtmPvcOAMLoopbackFrequency OBJECT-TYPE SYNTAX Integer32 (1..600) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the interval for sending OAM F5 Loopback cells." ::= { hwAtmPvcOAMLoopbackEntry 11 } hwAtmPvcOAMLoopbackUpCount OBJECT-TYPE SYNTAX Integer32 (1..600) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the number of continuous OAM F5 Loopback cells that must be received before the PVC turns Up." DEFVAL { 3 } ::= { hwAtmPvcOAMLoopbackEntry 12 } hwAtmPvcOAMLoopbackDownCount OBJECT-TYPE SYNTAX Integer32 (1..600) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the number of continuous OAM F5 Loopback cells that are not received before the PVC turns Down." DEFVAL { 5 } ::= { hwAtmPvcOAMLoopbackEntry 13 } hwAtmPvcOAMLoopbackRetryFrequency OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the interval for sending cells during OAM F5 Loopback retransmission verification before the PVC status changes." ::= { hwAtmPvcOAMLoopbackEntry 14 } hwAtmPvcOAMLoopbackRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { hwAtmPvcOAMLoopbackEntry 51 } hwAtmPvpLimitTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmPvpLimitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the VP limit. To monitor the VP, configure related VP parameters." ::= { hwAtmObjects 18 } hwAtmPvpLimitEntry OBJECT-TYPE SYNTAX HwAtmPvpLimitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the VP limit." INDEX { hwAtmPvpLimitIfIndex, hwAtmPvpLimitVpi } ::= { hwAtmPvpLimitTable 1 } HwAtmPvpLimitEntry ::= SEQUENCE { hwAtmPvpLimitIfIndex InterfaceIndex, hwAtmPvpLimitVpi AtmVpIdentifier, hwAtmPvpLimitPeakRate Integer32, hwAtmPvpLimitRowStatus RowStatus } hwAtmPvpLimitIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the interface index." ::= { hwAtmPvpLimitEntry 1 } hwAtmPvpLimitVpi OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI." ::= { hwAtmPvpLimitEntry 2 } hwAtmPvpLimitPeakRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "VCI." ::= { hwAtmPvpLimitEntry 11 } hwAtmPvpLimitRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus. " ::= { hwAtmPvpLimitEntry 51 } hwAtmConformance OBJECT IDENTIFIER ::= { hwAtmMIB 11 } hwAtmCompliances OBJECT IDENTIFIER ::= { hwAtmConformance 1 } hwAtmCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for systems supporting the HUAWEI-ATM-MIB." MODULE MANDATORY-GROUPS { hwAtmObjectGroup, hwAtmMapPvpObjectGroup, hwAtmMapPvcObjectGroup, hwAtmPvcIpoaObjectGroup, hwAtmPvcBridgeObjectGroup, hwAtmPvcServiceObjectGroup, hwAtmPvcOAMLoopbackObjectGroup, hwAtmPvpLimitObjectGroup } ::= { hwAtmCompliances 1 } hwAtmGroups OBJECT IDENTIFIER ::= { hwAtmConformance 2 } hwAtmObjectGroup OBJECT-GROUP OBJECTS { hwAtmIfType, hwAtmClock, hwAtmFrameFormat, hwAtmScramble, hwAtmLoopback } STATUS current DESCRIPTION "The Atm attribute group." ::= { hwAtmGroups 1 } hwAtmIfConf OBJECT-GROUP OBJECTS { hwAtmIfConfMaxVccs, hwAtmIfConfOperVccs, hwAtmIfConfIntfType } STATUS current DESCRIPTION "Description." ::= { hwAtmGroups 2 } hwAtmVplObjectGroup OBJECT-GROUP OBJECTS { hwAtmPvcBridgeDstIfIndex, hwAtmPvcBridgeRowStatus } STATUS current DESCRIPTION "The Atm Pvc Bridge attribute group." ::= { hwAtmGroups 3 } hwAtmVclObjectGroup OBJECT-GROUP OBJECTS { hwAtmVclName, hwAtmVccAal5EncapsType, hwAtmVclRowStatus } STATUS current DESCRIPTION "Description." ::= { hwAtmGroups 4 } hwAtmMapPvpObjectGroup OBJECT-GROUP OBJECTS { hwAtmMapPvpRemoteVplVpi, hwAtmMapPvpRowStatus } STATUS current DESCRIPTION "The Atm Map Pvp attribute group." ::= { hwAtmGroups 5 } hwAtmMapPvcObjectGroup OBJECT-GROUP OBJECTS { hwAtmMapPvcRemoteVclVpi, hwAtmMapPvcRemoteVclVci, hwAtmMapPvcRowStatus } STATUS current DESCRIPTION "The Atm Map Pvc attribute group." ::= { hwAtmGroups 6 } hwAtmServiceObjectGroup OBJECT-GROUP OBJECTS { hwAtmServiceType, hwAtmServiceOutputPcr, hwAtmServiceOutputScr, hwAtmServiceOutputMbs, hwAtmServiceCbrCdvtValue, hwAtmServiceOutputMcr, hwAtmServiceRowStatus } STATUS current DESCRIPTION "The Atm Service attribute group." ::= { hwAtmGroups 7 } hwAtmPvcServiceObjectGroup OBJECT-GROUP OBJECTS { hwAtmPvcServiceName, hwAtmPvcTransmittalDirection, hwAtmPvcServiceRowStatus } STATUS current DESCRIPTION "The Atm Pvc Service attribute group." ::= { hwAtmGroups 8 } hwAtmPvcIpoaObjectGroup OBJECT-GROUP OBJECTS { hwAtmPvcIpoaIpMask, hwAtmPvcIpoaInarpInterval, hwAtmPvcIpoaBroadcast, hwAtmPvcIpoaRowStatus } STATUS current DESCRIPTION "The Atm Pvc IPOA attribute group." ::= { hwAtmGroups 9 } hwAtmPvcBridgeObjectGroup OBJECT-GROUP OBJECTS { hwAtmVplRowStatus } STATUS current DESCRIPTION "The Atm Pvl attribute group." ::= { hwAtmGroups 10 } hwAtmPvcOAMLoopbackObjectGroup OBJECT-GROUP OBJECTS { hwAtmPvcOAMLoopbackFrequency, hwAtmPvcOAMLoopbackUpCount, hwAtmPvcOAMLoopbackDownCount, hwAtmPvcOAMLoopbackRetryFrequency, hwAtmPvcOAMLoopbackRowStatus } STATUS current DESCRIPTION "The Port attribute group." ::= { hwAtmGroups 11 } hwAtmPvpLimitObjectGroup OBJECT-GROUP OBJECTS { hwAtmPvpLimitPeakRate, hwAtmPvpLimitRowStatus } STATUS current DESCRIPTION "The Port attribute group." ::= { hwAtmGroups 12 } END -- -- HUAWEI-ATM-MIB.mib --