-- ========================================================================== -- Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P. -- -- Description: The purpose of this MIB file is to provide the definition of -- voice call record. -- Reference: -- Version: V1.0 -- History: -- V1.0 2008-02-17 Initial version, created by Tian Xiaoqiang, Qu Jin -- ========================================================================== HPN-ICF-VOICE-CALL-ACTIVE-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY, Integer32, Gauge32 FROM SNMPv2-SMI InetAddressType, InetAddress FROM INET-ADDRESS-MIB HpnicfCodecType FROM HPN-ICF-VOICE-DIAL-CONTROL-MIB callActiveSetupTime, callActiveIndex FROM DIAL-CONTROL-MIB TEXTUAL-CONVENTION FROM SNMPv2-TC hpnicfVoice FROM HPN-ICF-OID-MIB; hpnicfVoCallActive MODULE-IDENTITY LAST-UPDATED "200802170000Z" ORGANIZATION "" CONTACT-INFO "" DESCRIPTION "This MIB file is to provide the definition of voice call active record information." REVISION "200802170000Z" DESCRIPTION "The initial version of this MIB file." ::= { hpnicfVoice 15 } -- ====================================== -- Type declaration -- ====================================== HpnicfGUid ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents a global call identifier. The global call identifier is used as an unique identifier for an end-to-end call. A zero length HpnicfGUid indicates no value for the global call identifier." SYNTAX OCTET STRING(SIZE(0..16)) hpnicfVoiceCallActiveObjects OBJECT IDENTIFIER ::= { hpnicfVoCallActive 1 } -- =========================================================================== -- hpnicfVoiceCallActiveTable -- =========================================================================== hpnicfVoiceCallActiveTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfVoiceCallActiveEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is the voice extension to the call active table of DIAL-CONTROL-MIB. It contains voice encapsulation call leg information that is derived from the statistics of lower layer telephony interface." ::= { hpnicfVoiceCallActiveObjects 1 } hpnicfVoiceCallActiveEntry OBJECT-TYPE SYNTAX HpnicfVoiceCallActiveEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information regarding a single voice encapsulation call leg. The call leg entry is identified by using the same index objects that are used by call active table of DIAL-CONTROL-MIB to identify the call. An entry of this table is created when its associated call active entry in the DIAL-CONTROL-MIB is created and call active entry contains the call establishment to a voice over telephony network peer. The entry is deleted when its associated call active entry in the DIAL-CONTROL-MIB is deleted." INDEX { callActiveSetupTime, callActiveIndex } ::= { hpnicfVoiceCallActiveTable 1 } HpnicfVoiceCallActiveEntry ::= SEQUENCE { hpnicfVoCallActiveConnectionId HpnicfGUid, hpnicfVoCallActiveTxDuration Gauge32, hpnicfVoCallActiveVoiceTxDuration Gauge32, hpnicfVoCallActiveFaxTxDuration Gauge32, hpnicfVoCallActiveCoderType HpnicfCodecType, hpnicfVoCallActiveImgPageCount Gauge32 } hpnicfVoCallActiveConnectionId OBJECT-TYPE SYNTAX HpnicfGUid MAX-ACCESS read-only STATUS current DESCRIPTION "The global call identifier for the gateway call." ::= { hpnicfVoiceCallActiveEntry 1 } hpnicfVoCallActiveTxDuration OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Duration of transmit path open from this peer to the voice gateway for the call. The units is milliseconds." ::= { hpnicfVoiceCallActiveEntry 2 } hpnicfVoCallActiveVoiceTxDuration OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Duration of voice transmitted from this peer to voice gateway for this call. The voice utilization rate can be obtained by dividing this by hpnicfVoCallActiveTXDuration object. The units is milliseconds." ::= { hpnicfVoiceCallActiveEntry 3 } hpnicfVoCallActiveFaxTxDuration OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Duration of fax transmitted from this peer to voice gateway for this call. The fax utilization rate can be obtained by dividing this by hpnicfVoCallActiveTXDuration object. The units is milliseconds." ::= { hpnicfVoiceCallActiveEntry 4 } hpnicfVoCallActiveCoderType OBJECT-TYPE SYNTAX HpnicfCodecType MAX-ACCESS read-only STATUS current DESCRIPTION "The negotiated coder type. It specifies the encode type to the PSTN leg of a call." ::= { hpnicfVoiceCallActiveEntry 5 } hpnicfVoCallActiveImgPageCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of fax related image pages are received or transmitted via the peer for the call. The units is pages." ::= { hpnicfVoiceCallActiveEntry 6 } -- =========================================================================== -- hpnicfVoiceVoIPCallActiveTable -- =========================================================================== hpnicfVoiceVoIPCallActiveTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfVoiceVoIPCallActiveEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is the VoIP extension to the call active table of DIAL-CONTROL-MIB. It contains VoIP call leg information about specific VoIP call destination." ::= { hpnicfVoiceCallActiveObjects 2 } hpnicfVoiceVoIPCallActiveEntry OBJECT-TYPE SYNTAX HpnicfVoiceVoIPCallActiveEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information regarding a single VoIP call leg. The call leg entry is identified by using the same index objects that are used by call active table of DIAL-CONTROL-MIB to identify the call. An entry of this table is created when its associated call active entry in the DIAL-CONTROL-MIB is created and the call active entry contains information for the call establishment to the peer on the IP backbone via a voice over IP peer. The entry is deleted when its associated call active entry in the DIAL-CONTROL-MIB is deleted." INDEX { callActiveSetupTime, callActiveIndex } ::= { hpnicfVoiceVoIPCallActiveTable 1 } HpnicfVoiceVoIPCallActiveEntry ::= SEQUENCE { hpnicfVoVoIPCallActiveConnectionId HpnicfGUid, hpnicfVoVoIPCallActiveRemSigIPType InetAddressType, hpnicfVoVoIPCallActiveRemSigIPAddr InetAddress, hpnicfVoVoIPCallActiveRemSigPort Integer32, hpnicfVoVoIPCallActiveRemMedIPType InetAddressType, hpnicfVoVoIPCallActiveRemMedIPAddr InetAddress, hpnicfVoVoIPCallActiveRemMedPort Integer32, hpnicfVoVoIPCallActiveSessProtocol INTEGER, hpnicfVoVoIPCallActiveCoderType HpnicfCodecType } hpnicfVoVoIPCallActiveConnectionId OBJECT-TYPE SYNTAX HpnicfGUid MAX-ACCESS read-only STATUS current DESCRIPTION "The global call identifier for the gateway call." ::= { hpnicfVoiceVoIPCallActiveEntry 1 } hpnicfVoVoIPCallActiveRemSigIPType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of remote system signalling IP address for the VoIP call." ::= { hpnicfVoiceVoIPCallActiveEntry 2 } hpnicfVoVoIPCallActiveRemSigIPAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Remote system signalling IP address for the VoIP call." ::= { hpnicfVoiceVoIPCallActiveEntry 3 } hpnicfVoVoIPCallActiveRemSigPort OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Remote system UDP listener signalling port to which to transmit voice packets." ::= { hpnicfVoiceVoIPCallActiveEntry 4 } hpnicfVoVoIPCallActiveRemMedIPType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of remote system media IP address for the VoIP call." ::= { hpnicfVoiceVoIPCallActiveEntry 5 } hpnicfVoVoIPCallActiveRemMedIPAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Remote system media IP address for the VoIP call." ::= { hpnicfVoiceVoIPCallActiveEntry 6 } hpnicfVoVoIPCallActiveRemMedPort OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Remote system UDP listener media port to which to transmit voice packets." ::= { hpnicfVoiceVoIPCallActiveEntry 7 } hpnicfVoVoIPCallActiveSessProtocol OBJECT-TYPE SYNTAX INTEGER { unknown(1), h323(2), sip(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The object specifies the session protocol to be used for internet call between local and remote router via IP backbone." ::= { hpnicfVoiceVoIPCallActiveEntry 8 } hpnicfVoVoIPCallActiveCoderType OBJECT-TYPE SYNTAX HpnicfCodecType MAX-ACCESS read-only STATUS current DESCRIPTION "The negotiated coder type. It specifies the encode type to the VoIP leg of a call." ::= { hpnicfVoiceVoIPCallActiveEntry 9 } END