-- ================================================================= -- Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P. -- -- Description: Power over ethernet extend MIB -- Reference: POWER-ETHERNET-MIB -- Version: V1.5 -- History: -- V1.0 2004-07-24 Created by Gaolong -- V1.1 2004-09-08 Update file by Gaolong for some syntax errors. -- V1.2 2004-11-19 Update file by liuhongxu for poe need. -- add hpnicfMainPsePriorityMode hpnicfPsePowerMaxValue -- hpnicfpsePDChangNotification adjust the objects' sequence of -- hpnicfPsePortTable and hpnicfMainPseTable add the description -- of MANDATORY-GROUPS in hpnicfPseCompliance. -- V1.3 2004-12-16 Update file by liuhongxu for poe profile -- add hpnicfPsePortProfile, hpnicfPseProfilesTable -- change the name of hpnicfPseProfileIndex add -- hpnicfPseProfileApplyNum. adjust the format of this mib. -- V1.4 2005-03-29 Update file by Wangzhaoyan for poe pow need. -- add hpnicfPOEPowerObjects, hpnicfPOEThresholdLimitObjs, -- hpnicfPOESupModuleInfoObjs, hpnicfPOEDCOutStateObjects, -- hpnicfPOEDCDCOutInfoObjects, hpnicfPOEACSwitchStateModuleObjs, -- hpnicfPOEInCurStateObjects, hpnicfPOEAlarmStateObjects and the -- sub-nodes. add 17 traps change the node name from -- hpnicfpsePDChangNotification to hpnicfpsePDChangeNotification -- change some detail as the suggestion from Wangyingxia and -- Yangyang. adjust the format of this mib. -- V1.5 2005-11-21 Update file by Liweizhen for controling the power-management -- policy of PSE or PD. Add hpnicfPsePolicyMode, hpnicfPDPolicyMode, -- hpnicfMainPsePowerPriority. -- Delete some description of hpnicfPsePortProfileIndex node. -- Change the description of hpnicfPseProfilePowerMode node. -- Change SYNTAX OCTET STRING range for the following nodes: -- hpnicfPOEPowerType, hpnicfPOESupervisionModuleName, -- hpnicfPOESMFactorName, hpnicfPOEModuleHardVerInfo. -- Adjust the format of this mib. -- ================================================================= HPN-ICF-POWER-ETH-EXT-MIB DEFINITIONS ::= BEGIN IMPORTS hpnicfCommon FROM HPN-ICF-OID-MIB pethPsePortGroupIndex, pethPsePortIndex, pethMainPseGroupIndex, pethPsePortDetectionStatus FROM POWER-ETHERNET-MIB OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF Integer32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI DisplayString, RowStatus FROM SNMPv2-TC; hpnicfPowerEthernetExt MODULE-IDENTITY LAST-UPDATED "200407261023Z" -- July 26, 2004 at 10:23 GMT ORGANIZATION "" CONTACT-INFO "" DESCRIPTION "Description." ::= { hpnicfCommon 14 } -- -- Node definitions -- hpnicfPsePortTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfPsePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The indexing scheme is taken form that used by the IETF Power MIB. The same indexing scheme is used to give continuity in behaviour between that standard and this extensions definitioin." ::= { hpnicfPowerEthernetExt 1 } hpnicfPsePortEntry OBJECT-TYPE SYNTAX HpnicfPsePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The pethPsePortGroupIndex is imported from the IETF Power MIB and uniquely identifies the group containing the port to which power ethernet PSE is connected. Group means (box in the stack, module in a rack). The pethPsePortPowerIndex is imported from the IETF Power MIB and uniquely identifies the power ethernet PSE port within group pethPseGroupIndex to which the power Ethernet PSE entry is connected. This value will match the local port number on a switch." INDEX { pethPsePortGroupIndex, pethPsePortIndex } ::= { hpnicfPsePortTable 1 } HpnicfPsePortEntry ::= SEQUENCE { hpnicfPsePortFaultDescription DisplayString, hpnicfPsePortPeakPower Integer32, hpnicfPsePortAveragePower Integer32, hpnicfPsePortCurrentPower Integer32, hpnicfPsePortPowerLimit Integer32, hpnicfPsePortProfileIndex Integer32 } hpnicfPsePortFaultDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The object supports the fault category of the IETF Power MIB [1] pethPsePortDetectionStatus object. A textual description containing more information about the nature of this fault is provided by this object. Typically this will detail the precise PoE hardware state which is causing the pethPsePortDetectionStatus object to be in the 'fault' state. It is a DisplayString of up to 255 characters." ::= { hpnicfPsePortEntry 2 } hpnicfPsePortPeakPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The object specifies the peak power which has been consumed by the port. It is defined as the highest measured value of power in milliWatts that has been consumed by the port. Its value is only reset when link is lost, the port is PoE disabled or when it is manually reset by the user asspecified below. It is a read/write integer value with units of milliWatts. Writing a value of zero to this object resets its value to zero. Writing any other value to this object has no effect on its value and an error is returned." ::= { hpnicfPsePortEntry 3 } hpnicfPsePortAveragePower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The object specifies the average power which has been consumed by the port. This object is a read/write integer value with units of milliWatts. Writing a value of zero to this object resets its value to zero. Writing any other value to this object has no effect on its value and an error is returned." ::= { hpnicfPsePortEntry 4 } hpnicfPsePortCurrentPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The object specifies the power currently being consumed by the port. It is a read only integer value with units of milliWatts." ::= { hpnicfPsePortEntry 5 } hpnicfPsePortPowerLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The object specifies the power limit set for this port. The PSE will not supply more than this level of power to the specified port. It is a read/write integer value with units of milliWatts." ::= { hpnicfPsePortEntry 6 } hpnicfPsePortProfileIndex OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the power profile which is currently associated with this port. This object references the corresponding hpnicfPseProfileIndex object in the power profiles table. A value of zero is a special case and indicates that no power profile is currently associated with this port. When hpnicfPseProfileIndex is set to an index of existent profile, pethPsePortPowerPairs, pethPsePortPowerPriority, pethPsePortAdminEnable and hpnicfPsePortPowerLimit will be set to the same as corresponding value. PethPsePortPowerPairs, pethPsePortPowerPriority and pethPsePortAdminEnable are objects of rfc3621-Power-Ethernet.mib." ::= { hpnicfPsePortEntry 7 } hpnicfMainPseTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfMainPseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { hpnicfPowerEthernetExt 2 } hpnicfMainPseEntry OBJECT-TYPE SYNTAX HpnicfMainPseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The pethMainPseGroupIndex is imported from the IETF Power MIB and uniquely identifies the group containing the port to which power ethernet PSE is connected. Group means (box in the stack, module in a rack) and the value 1 MUST be used for non-modular devices." INDEX { pethMainPseGroupIndex } ::= { hpnicfMainPseTable 1 } HpnicfMainPseEntry ::= SEQUENCE { hpnicfMainGuaranteedPowerRemaining Integer32, hpnicfMainPsePeakPower Integer32, hpnicfMainPseAveragePower Integer32, hpnicfMainPsePowerLimit Integer32, hpnicfMainPsePriorityMode INTEGER, hpnicfMainPseLegacy INTEGER, hpnicfMainPsePowerPriority INTEGER } hpnicfMainPsePowerLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The object specifies the power limit set for the unit as a whole. The PoE unit will already have a nominal power defined by the IETF Power MIB [1] pethMainPsePower object. This OPTIONAL object specifies a further limit to this nominal power value. This may be useful to control the thermals of the unit, or for internal testing purposes. One possible use for this object may be to lower the power consumption of the unit if one or more of the internal fans have broken. It is a read/write integer value with units of Watts (note - Watts is chosen instead of milliWatts here since the IETF Power MIB [1] measures unit based parameters, such as the pethMainPsePower object, in units of Watts)." ::= { hpnicfMainPseEntry 1 } hpnicfMainPseAveragePower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The object specifies the average power which has been consumed by the port. It is a read/write integer value with units of Watts (note - Watts is chosen instead of milliWatts here since the IETF Power MIB [1] measures unit based parameters, such as the pethMainPsePower object, in units of Watts). Writing a value of zero to this object resets its value to zero. Writing any other value to this object has no effect on its value and an error is returned." ::= { hpnicfMainPseEntry 2 } hpnicfMainPsePeakPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The object specifies the peak power which has been consumed for PoE. It is defined as the highest measured value of power in milliWatts that has been consumed at any one point in time by the sum of the PoE ports. Its value is only reset when the unit is powered on or when it is manually reset by the user as specifiedbelow. It is a read/write integer value with units of Watts (note - Watts is chosen instead of milliWatts here since the IETF Power MIB [1] measures unit based parameters, such as the pethMainPsePower object, in units of Watts). Writing a value of zero to this object resets its value to zero. Writing any other value to this object has noeffect on its value and an error is returned." ::= { hpnicfMainPseEntry 3 } hpnicfMainGuaranteedPowerRemaining OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The object specifies the amount of power remaining in the guaranteed power pool. Each time a port is placed into guaranteed mode it reserves a set amount of power out of the total guaranteed power pool for the system. This intention of this object is to give the client of this MIB (whether that be the CLI or the Web interface or the end user) an indication of how many ports can still be placed into guaranteed mode. It is a read only integer value with units of Watts(note - Watts is chosen instead of milliWatts here since the IETF Power MIB [1] measures unit based parameters,such as the pethMainPsePower object, in units of Watts)." ::= { hpnicfMainPseEntry 4 } hpnicfMainPsePriorityMode OBJECT-TYPE SYNTAX INTEGER { disconnection(0), non-disconnection(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Describes or controls the priority mode on slot which must be enabled firstly. When a new board is inserted, and the power is over-load, a value of disconnection(0) means that the power will stop supply to the low priority slot ; A value of non-disconnection(1) means that the slot still supply when a new board is inserted, and the power is over-load too." ::= { hpnicfMainPseEntry 5 } hpnicfMainPseLegacy OBJECT-TYPE SYNTAX INTEGER { enable(0), disable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Describes or controls the legacy mode on slot which must be enabled firstly. Legacy mode: standard or nonstandard PD detection mode." ::= { hpnicfMainPseEntry 6 } hpnicfMainPsePowerPriority OBJECT-TYPE SYNTAX INTEGER { critical(1), high(2), low(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Describes or controls the priority of the PSE. The priority will be used by the PSE policy to prevent from power overloading. If the priority of PSE is set to critical, the PSE will turn into guaranteed mode. The priority could be used by a control mechanism that prevents power overloading by disconnecting PSEs with lower power priority. PSEs that connect devices critical to the application should be set to higher priority." ::= { hpnicfMainPseEntry 7 } -- Power Profile PSE table hpnicfPseProfilesTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfPseProfilesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of objects representing a set of power profiles. Power profiles can be applied to PoE ports, which have the effect of automatically setting the priority, power limit and PoE enable MIB objects to the values specified in the power profile." ::= { hpnicfPowerEthernetExt 7 } hpnicfPseProfilesEntry OBJECT-TYPE SYNTAX HpnicfPseProfilesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A set of objects that display and control the Main power of a PSE." INDEX { hpnicfPseProfileIndex } ::= { hpnicfPseProfilesTable 1 } HpnicfPseProfilesEntry ::= SEQUENCE { hpnicfPseProfileIndex Integer32, hpnicfPseProfileName DisplayString, hpnicfPseProfilePowerMode INTEGER, hpnicfPseProfilePowerLimit Integer32, hpnicfPseProfilePriority INTEGER, hpnicfPseProfilePairs INTEGER, hpnicfPseProfileApplyNum Integer32, hpnicfPseProfileRowStatus RowStatus } hpnicfPseProfileIndex OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the profile. This uniquely allow the profile to be identified." ::= { hpnicfPseProfilesEntry 1 } hpnicfPseProfileName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..15)) MAX-ACCESS read-create STATUS current DESCRIPTION "Assigns the profile a name with which the settings can be assiciated with. For example, 'NBX Phone'." ::= { hpnicfPseProfilesEntry 2 } hpnicfPseProfilePowerMode OBJECT-TYPE SYNTAX INTEGER { powerDisabled (1), powerEnabled (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The power mode associated with this power profile. There are two possible power modes as follows: powerDisabled, powerEnabled. When a power profile is applied to a PSE port, this value dictates the settings of the ports pethPsePortPowerPriority and pethPsePortAdminEnable objects." ::= { hpnicfPseProfilesEntry 3 } hpnicfPseProfilePowerLimit OBJECT-TYPE SYNTAX Integer32 (0..15400) MAX-ACCESS read-create STATUS current DESCRIPTION "The power limit to be applied to the ports hpnicfPsePortPowerLimit object when the profile is applied to the PSE port. Expressed in milliWatts." ::= { hpnicfPseProfilesEntry 4 } hpnicfPseProfilePriority OBJECT-TYPE SYNTAX INTEGER { critical(1), high(2), low(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object controls the priority of the port from the point of view of a power management algorithm. The priority that is set by this variable could be used by a control mechanism that prevents over current situations by disconnecting first ports with lower power priority. Ports that connect devices critical to the operation of the network - like the E911 telephones ports - should be set to higher priority." ::= { hpnicfPseProfilesEntry 5 } hpnicfPseProfilePairs OBJECT-TYPE SYNTAX INTEGER { signal(1), spare(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Describes or controls the pairs in use. If the value of pethPsePortPowerPairsControl is true, this object is writable. A value of signal(1) means that the signal pairs only are in use. A value of spare(2) means that the spare pairs only are in use." REFERENCE "IEEE Std 802.3af Section 30.9.1.1.4 aPSEPowerPairs" ::= { hpnicfPseProfilesEntry 6 } hpnicfPseProfileApplyNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of this profile which has been applied. If hpnicfPseProfileApplyNum is not zero, user can't change the current line." ::= { hpnicfPseProfilesEntry 7 } hpnicfPseProfileRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this classifier. If hpnicfPseProfileApplyNum is not zero, user can't delete the current line." ::= { hpnicfPseProfilesEntry 8 } hpnicfPseAutoDetectActive OBJECT-TYPE SYNTAX INTEGER { notSupported(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The object specifies whether the device auto-detection feature is active. If this object is set to Active, and a known powered device is detected, then the port will automatically switch to Auto-Guaranteed mode. This is a stackwide object (ie. it is not referenced by group index)." ::= { hpnicfPowerEthernetExt 3 } hpnicfPsePowerMaxValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The object specifies the max poe power for lanswitch. The value should between the power currently and the max power." ::= { hpnicfPowerEthernetExt 5 } hpnicfPsePolicyMode OBJECT-TYPE SYNTAX INTEGER { disabled(1), priority(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The PSE policy only applies to the situation that when a new board (PSE) is inserted, and the power is overload. A value of priority(2) means that the power will stop supplying to the low priority PSE. About PSE priority, please refer to hpnicfMainPsePowerPriority. A value of disabled(1) means that the power will stop supplying to the new inserted PSE. The default value of this object is disabled(1)." ::= { hpnicfPowerEthernetExt 9 } hpnicfPDPolicyMode OBJECT-TYPE SYNTAX INTEGER { disabled(1), priority(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The PD policy only applies to the situation that when a new PD is inserted, and the power of PSE is overload. A value of priority(2) means that the power will stop supplying to the low priority port PD. About port priority, please refer to pethPsePortPowerPriority. A value of disabled(1) means that the slot stop supplying to the new inserted PD. The default value of this object is disabled(1)." ::= { hpnicfPowerEthernetExt 10 } hpnicfpseportNotification OBJECT IDENTIFIER ::= { hpnicfPowerEthernetExt 6 } -- Notification Control Objects hpnicfpsePDChangeNotification NOTIFICATION-TYPE OBJECTS { pethPsePortDetectionStatus } STATUS current DESCRIPTION "This notification indicates if PD has been inserted or pulled out." ::= { hpnicfpseportNotification 1 } hpnicfPOEDisconnectNotification NOTIFICATION-TYPE OBJECTS { hpnicfPOEAlarmModuleInfoIndex, hpnicfPOEModuleDisconnect } STATUS current DESCRIPTION "This notification indicates the POE power module does not disconnect." ::= { hpnicfpseportNotification 2 } hpnicfPOEInputErrorNotification NOTIFICATION-TYPE OBJECTS { hpnicfPOEAlarmModuleInfoIndex, hpnicfPOEModuleInputError } STATUS current DESCRIPTION "This notification indicates the POE power module input error." ::= { hpnicfpseportNotification 3 } hpnicfPOEOutputErrorNotification NOTIFICATION-TYPE OBJECTS { hpnicfPOEAlarmModuleInfoIndex, hpnicfPOEModuleOutputError } STATUS current DESCRIPTION "This notification indicates the POE power module output error." ::= { hpnicfpseportNotification 4 } hpnicfPOEOverVoltageNotification NOTIFICATION-TYPE OBJECTS { hpnicfPOEAlarmModuleInfoIndex, hpnicfPOEModuleOverVoltage } STATUS current DESCRIPTION "This notification indicates the POE power module overruns the voltage limit." ::= { hpnicfpseportNotification 5 } hpnicfPOEOverTempNotification NOTIFICATION-TYPE OBJECTS { hpnicfPOEAlarmModuleInfoIndex, hpnicfPOEModuleOverTemp } STATUS current DESCRIPTION "This notification indicates the POE power module overruns the temperature limit." ::= { hpnicfpseportNotification 6 } hpnicfPOEFanErrorNotification NOTIFICATION-TYPE OBJECTS { hpnicfPOEAlarmModuleInfoIndex, hpnicfPOEModuleFanError } STATUS current DESCRIPTION "This notification indicates the POE power module fan error." ::= { hpnicfpseportNotification 7 } hpnicfPOEModuleShutdownNotification NOTIFICATION-TYPE OBJECTS { hpnicfPOEAlarmModuleInfoIndex, hpnicfPOEModuleShutdown } STATUS current DESCRIPTION "This notification indicates the POE power module is closed." ::= { hpnicfpseportNotification 8 } hpnicfPOECurRestrictedNotification NOTIFICATION-TYPE OBJECTS { hpnicfPOEAlarmModuleInfoIndex, hpnicfPOEModuleCurRestricted } STATUS current DESCRIPTION "This notification indicates the POE power module current is restricted." ::= { hpnicfpseportNotification 9 } hpnicfPOEACSwitchNotification NOTIFICATION-TYPE OBJECTS { hpnicfPOEACSwitchStateIndex, hpnicfPOEACSwitchState } STATUS current DESCRIPTION "This notification indicates the AC input switch alarm of this POE power." ::= { hpnicfpseportNotification 10 } hpnicfPOEACInCurANotification NOTIFICATION-TYPE OBJECTS { hpnicfPOEInCurAState } STATUS current DESCRIPTION "This notification indicates the AC input current A alarm state of this POE power." ::= { hpnicfpseportNotification 11 } hpnicfPOEACInCurBNotification NOTIFICATION-TYPE OBJECTS { hpnicfPOEInCurBState } STATUS current DESCRIPTION "This notification indicates the AC input current B alarm state of this POE power." ::= { hpnicfpseportNotification 12 } hpnicfPOEACInCurCNotification NOTIFICATION-TYPE OBJECTS { hpnicfPOEInCurCState } STATUS current DESCRIPTION "This notification indicates the AC input current C alarm state of this POE power." ::= { hpnicfpseportNotification 13 } hpnicfPOEACSwitchVolABNotification NOTIFICATION-TYPE OBJECTS { hpnicfPOESwitchStateVolExIndex, hpnicfPOESwitchStateInVolAB} STATUS current DESCRIPTION "This notification indicates the AC input voltage AB alarm state of this POE power." ::= { hpnicfpseportNotification 14 } hpnicfPOEACSwitchVolBCNotification NOTIFICATION-TYPE OBJECTS { hpnicfPOESwitchStateVolExIndex, hpnicfPOESwitchStateInVolBC} STATUS current DESCRIPTION "This notification indicates the AC input voltage BC alarm state of this POE power." ::= { hpnicfpseportNotification 15 } hpnicfPOEACSwitchVolCANotification NOTIFICATION-TYPE OBJECTS { hpnicfPOESwitchStateVolExIndex, hpnicfPOESwitchStateInVolCA } STATUS current DESCRIPTION "This notification indicates the AC input voltage CA alarm state of this POE power." ::= { hpnicfpseportNotification 16 } hpnicfPOEDCOutVolNotification NOTIFICATION-TYPE OBJECTS { hpnicfPOEDCOutStateIndex, hpnicfPOEDCOutDCVolAlarm } STATUS current DESCRIPTION "This notification indicates the DC output alarm of this POE power." ::= { hpnicfpseportNotification 17 } hpnicfPOEShutdownNotification NOTIFICATION-TYPE STATUS current DESCRIPTION "This notification indicates the whole POE power has been shutdown." ::= { hpnicfpseportNotification 18 } hpnicfPseComformance OBJECT IDENTIFIER ::= { hpnicfPowerEthernetExt 4 } hpnicfPseCompliances OBJECT IDENTIFIER ::= { hpnicfPseComformance 1 } hpnicfPseCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Description." MODULE -- this module MANDATORY-GROUPS { hpnicfPsePortGroup, hpnicfMainPseGroup, hpnicfPseScalarGroup, hpnicfPsePDNotificationGroup } GROUP hpnicfPseProfilesGroup DESCRIPTION "This group is mandatory only for executing POE commands as a batch." ::= { hpnicfPseCompliances 1 } hpnicfPseGroup OBJECT IDENTIFIER ::= { hpnicfPseComformance 2 } hpnicfPsePortGroup OBJECT-GROUP OBJECTS { hpnicfPsePortProfileIndex, hpnicfPsePortPowerLimit, hpnicfPsePortCurrentPower, hpnicfPsePortAveragePower, hpnicfPsePortPeakPower, hpnicfPsePortFaultDescription, hpnicfMainPsePriorityMode } STATUS current DESCRIPTION "A collection of objects should be supported at the same time." ::= { hpnicfPseGroup 1 } hpnicfMainPseGroup OBJECT-GROUP OBJECTS { hpnicfMainPsePowerLimit, hpnicfMainPseAveragePower, hpnicfMainPsePeakPower, hpnicfMainGuaranteedPowerRemaining } STATUS current DESCRIPTION "A collection of objects should be supported at the same time." ::= { hpnicfPseGroup 2 } hpnicfPseScalarGroup OBJECT-GROUP OBJECTS { hpnicfPseAutoDetectActive, hpnicfPsePowerMaxValue, hpnicfPsePolicyMode , hpnicfPDPolicyMode } STATUS current DESCRIPTION "A collection of scalar objects supported." ::= { hpnicfPseGroup 3 } hpnicfPsePDNotificationGroup OBJECT-GROUP OBJECTS { hpnicfpsePDChangeNotification } STATUS current DESCRIPTION "PD Change Notification." ::= { hpnicfPseGroup 4 } hpnicfPseProfilesGroup OBJECT-GROUP OBJECTS { hpnicfPseProfileName, hpnicfPseProfilePowerMode, hpnicfPseProfilePowerLimit, hpnicfPseProfilePriority, hpnicfPseProfilePairs, hpnicfPseProfileApplyNum, hpnicfPseProfileRowStatus} STATUS current DESCRIPTION "A collection of objects should be supported at the same time." ::= { hpnicfPseGroup 5 } hpnicfPOEPowerThresholdLimitGroup OBJECT-GROUP OBJECTS { hpnicfPOEThresholdACMimimum, hpnicfPOEThresholdACMaximum, hpnicfPOEThresholdDCMinimum, hpnicfPOEThresholdDCMaximum } STATUS current DESCRIPTION "Power threshold limits group." ::= { hpnicfPseGroup 6 } hpnicfPOEPowerSupInfoGroup OBJECT-GROUP OBJECTS { hpnicfPOEPowerType, hpnicfPOEPowerModuleNum, hpnicfPOESupervisionModuleName, hpnicfPOESMMajorVersion, hpnicfPOESMMinorVersion, hpnicfPOESMFactorName} STATUS current DESCRIPTION "The basic Power information group." ::= { hpnicfPseGroup 7 } hpnicfPOEPowerDCOutStateGroup OBJECT-GROUP OBJECTS { hpnicfPOEDCOutStateModuleNum } STATUS current DESCRIPTION "The DC out power state group." ::= { hpnicfPseGroup 8 } hpnicfPOEPowerDCOutInfoGroup OBJECT-GROUP OBJECTS { hpnicfPOEDCOutCurNum } STATUS current DESCRIPTION "The power AC input switch information group" ::= { hpnicfPseGroup 9 } hpnicfPOEPowerACSwitchStateModuleGroup OBJECT-GROUP OBJECTS { hpnicfPOEACSwitchStateModuleNum} STATUS current DESCRIPTION "PD Change Notification." ::= { hpnicfPseGroup 10 } hpnicfPOEPowerInCurStateGroup OBJECT-GROUP OBJECTS { hpnicfPOEInCurStateModuleNum, hpnicfPOEInCurAState, hpnicfPOEInCurBState, hpnicfPOEInCurCState} STATUS current DESCRIPTION "PD Change Notification." ::= { hpnicfPseGroup 11 } hpnicfPOEPowerAlarmStateGroup OBJECT-GROUP OBJECTS { hpnicfPOEAlarmStateModuleNum } STATUS current DESCRIPTION "PD Change Notification." ::= { hpnicfPseGroup 12 } ACAlarmState ::= INTEGER { normal (1), underLimit (2), aboveLimit (3), lackPhrase (4), fuseBroken (5), switchOff (6), otherError (7) } DCAlarmState ::= INTEGER { normal (1), underLimit (2), aboveLimit (3), fuseBroken (4), switchOff (5), otherError (6) } SwitchState ::= INTEGER { on (1), off (2), highVoltInput (3), lowVoltInput (4) } ModuleAlarmState ::= INTEGER { normal (1), alarm (2) } hpnicfPOEPowerObjects OBJECT IDENTIFIER ::= { hpnicfPowerEthernetExt 8 } hpnicfPOEThresholdLimitObjs OBJECT IDENTIFIER ::= { hpnicfPOEPowerObjects 1 } hpnicfPOEThresholdACMimimum OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..10)) MAX-ACCESS read-write STATUS current DESCRIPTION "Input threshold AC minimum. It is a read-write node. The value of this node is 'OCTET STRING', it is used to describe a float value. So this string should fit the following rule: 1. This string should be terminated by '\0'; 2. Every characters should be number or radix point; 3. The radix point should occur only once, and it should not be the first or the last character of the string. The value of this node should be smaller than 264.0V and larger than 90.0V. And it should be smaller than the hpnicfPOEThresholdACMaximum." ::= { hpnicfPOEThresholdLimitObjs 1 } hpnicfPOEThresholdACMaximum OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..10)) MAX-ACCESS read-write STATUS current DESCRIPTION "Input threshold AC maximum. It is a read-write node. The value of this node is 'OCTET STRING', it is used to describe a float value. So this string should fit the following rule: 1. This string should be terminated by '\0'; 2. Every characters should be number or radix point; 3. The radix point should occur only once, and it should not be the first or the last character of the string. It should be smaller than 264.0V and larger than 90.0V. And it should be larger than the hpnicfPOEThresholdACMinimum." ::= { hpnicfPOEThresholdLimitObjs 2 } hpnicfPOEThresholdDCMinimum OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..10)) MAX-ACCESS read-write STATUS current DESCRIPTION "Input threshold DC minimum. It is a read-write node. The value of this node is 'OCTET STRING', it is used to describe a float value. So this string should fit the following rule: 1. This string should be terminated by '\0'; 2. Every characters should be number or radix point; 3. The radix point should occur only once, and it should not be the first or the last character of the string. It should be smaller than 47.0V and larger than 45.0V." ::= { hpnicfPOEThresholdLimitObjs 3 } hpnicfPOEThresholdDCMaximum OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..10)) MAX-ACCESS read-write STATUS current DESCRIPTION "Input threshold DC maximum. It is a read-write node. The value of this node is 'OCTET STRING', it is used to describe a float value. So this string should fit the following rule: 1. This string should be terminated by '\0'; 2. Every characters should be number or radix point; 3. The radix point should occur only once, and it should not be the first or the last character of the string. It should be smaller than 57.0V and larger than 55.0V." ::= { hpnicfPOEThresholdLimitObjs 4 } hpnicfPOESupModuleInfoObjs OBJECT IDENTIFIER ::= { hpnicfPOEPowerObjects 2 } hpnicfPOEPowerType OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the power." ::= { hpnicfPOESupModuleInfoObjs 1 } hpnicfPOEPowerModuleNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the power modules." ::= { hpnicfPOESupModuleInfoObjs 2 } hpnicfPOESupervisionModuleName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "The object specifies the Supervision Module name on this POE power." ::= { hpnicfPOESupModuleInfoObjs 3 } hpnicfPOESMMajorVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The object specifies the high byte of the monitor module version." ::= { hpnicfPOESupModuleInfoObjs 4 } hpnicfPOESMMinorVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The object specifies the low byte of the monitor module version." ::= { hpnicfPOESupModuleInfoObjs 5 } hpnicfPOESMFactorName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "The object specifies the name of the manufactor." ::= { hpnicfPOESupModuleInfoObjs 6 } hpnicfPOEModuleInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfPOEModuleInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of the module information on this POE power." ::= { hpnicfPOESupModuleInfoObjs 7 } hpnicfPOEModuleInfoEntry OBJECT-TYPE SYNTAX HpnicfPOEModuleInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of the module information on this POE power." INDEX { hpnicfPOEModuleIndex } ::= { hpnicfPOEModuleInfoTable 1 } HpnicfPOEModuleInfoEntry ::= SEQUENCE { hpnicfPOEModuleIndex Integer32, hpnicfPOEModuleID Integer32, hpnicfPOEModuleInfoPower Integer32, hpnicfPOEModuleHardVerInfo OCTET STRING } hpnicfPOEModuleIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The index of the current module on this POE power. It is also the index of hpnicfPOEModuleInfoTable. The range of this node is from 1 to hpnicfPOEPowerModuleNum." ::= { hpnicfPOEModuleInfoEntry 1 } hpnicfPOEModuleID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ID of the current module on this POE power." ::= { hpnicfPOEModuleInfoEntry 2 } hpnicfPOEModuleInfoPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The power of the current module on this POE power." ::= { hpnicfPOEModuleInfoEntry 3 } hpnicfPOEModuleHardVerInfo OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "The hardware version information of the current module on this POE power." ::= { hpnicfPOEModuleInfoEntry 4 } hpnicfPOEDCOutStateObjects OBJECT IDENTIFIER ::= { hpnicfPOEPowerObjects 3 } hpnicfPOEDCOutStateModuleNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The module number on this POE power. It is the maximum of the hpnicfPOEDCOutStateIndex." ::= { hpnicfPOEDCOutStateObjects 1 } hpnicfPOEDCOutStateTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfPOEDCOutStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of DC output power state on this POE power." ::= { hpnicfPOEDCOutStateObjects 2 } hpnicfPOEDCOutStateEntry OBJECT-TYPE SYNTAX HpnicfPOEDCOutStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of the DC output power state on this POE power." INDEX { hpnicfPOEDCOutStateIndex } ::= { hpnicfPOEDCOutStateTable 1 } HpnicfPOEDCOutStateEntry ::= SEQUENCE { hpnicfPOEDCOutStateIndex Integer32, hpnicfPOEDCOutDCVolAlarm DCAlarmState } hpnicfPOEDCOutStateIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The index of the DC output power state on this POE power. The range of this node is from 1 to hpnicfPOEDCOutStateModuleNum." ::= { hpnicfPOEDCOutStateEntry 1 } hpnicfPOEDCOutDCVolAlarm OBJECT-TYPE SYNTAX DCAlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "The DC output alarm of the DC output power state on this POE power. The value of this node will be the following values: normal (1), underLimit (2), aboveLimit (3), fuseBroken (4), switchOff (5), otherError (6)." ::= { hpnicfPOEDCOutStateEntry 2 } hpnicfPOEDCOutInfoObjects OBJECT IDENTIFIER ::= { hpnicfPOEPowerObjects 4 } hpnicfPOEDCOutCurNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DC output current on this POE power. It is the maximum of hpnicfPOEDCOutInfoIndex." ::= { hpnicfPOEDCOutInfoObjects 1 } hpnicfPOEDCOutInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfPOEDCOutInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of the DC output information on this POE power." ::= { hpnicfPOEDCOutInfoObjects 2 } hpnicfPOEDCOutInfoEntry OBJECT-TYPE SYNTAX HpnicfPOEDCOutInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of the DC output information on this POE power." INDEX { hpnicfPOEDCOutInfoIndex } ::= { hpnicfPOEDCOutInfoTable 1 } HpnicfPOEDCOutInfoEntry ::= SEQUENCE { hpnicfPOEDCOutInfoIndex Integer32, hpnicfPOEDCOutVol OCTET STRING, hpnicfPOEDCOutInfoLoadCur OCTET STRING } hpnicfPOEDCOutInfoIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The index of the DC output information on this POE POWER. The range of this node is from 1 to hpnicfPOEDCOutCurNum." ::= { hpnicfPOEDCOutInfoEntry 1 } hpnicfPOEDCOutVol OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..10)) MAX-ACCESS read-only STATUS current DESCRIPTION "The DC output voltage of the current DC output on this POE power." ::= { hpnicfPOEDCOutInfoEntry 2 } hpnicfPOEDCOutInfoLoadCur OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..10)) MAX-ACCESS read-only STATUS current DESCRIPTION "The total load current of the current DC output on this POE power." ::= { hpnicfPOEDCOutInfoEntry 3 } hpnicfPOEACSwitchStateModuleObjs OBJECT IDENTIFIER ::= { hpnicfPOEPowerObjects 5 } hpnicfPOEACSwitchStateModuleNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the AC swtich state module on this POE power. It is the maximum of hpnicfPOEACSwitchStateIndex." ::= { hpnicfPOEACSwitchStateModuleObjs 1 } hpnicfPOEACSwitchStateTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfPOEACSwitchStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of the AC switch state on this POE power." ::= { hpnicfPOEACSwitchStateModuleObjs 2 } hpnicfPOEACSwitchStateEntry OBJECT-TYPE SYNTAX HpnicfPOEACSwitchStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of the AC switch state on this POE power." INDEX { hpnicfPOEACSwitchStateIndex } ::= { hpnicfPOEACSwitchStateTable 1 } HpnicfPOEACSwitchStateEntry ::= SEQUENCE { hpnicfPOEACSwitchStateIndex Integer32, hpnicfPOEACSwitchState SwitchState } hpnicfPOEACSwitchStateIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The index of the AC switch state on this POE power. The range of this node is from 1 to hpnicfPOEACSwitchStateModuleNum." ::= { hpnicfPOEACSwitchStateEntry 1 } hpnicfPOEACSwitchState OBJECT-TYPE SYNTAX SwitchState MAX-ACCESS read-only STATUS current DESCRIPTION "The AC switch state on this POE power. The value of this node will be one of the following values: on (1), off (2), highVoltInput (3), lowVoltInput (4)" ::= { hpnicfPOEACSwitchStateEntry 2 } hpnicfPOEInCurStateObjects OBJECT IDENTIFIER ::= { hpnicfPOEPowerObjects 6 } hpnicfPOEInCurStateModuleNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The DC input current state of the module on this POE power. It is the maximum of the hpnicfPOESwitchStateVolExIndex." ::= { hpnicfPOEInCurStateObjects 1 } hpnicfPOEInCurAState OBJECT-TYPE SYNTAX ACAlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "The current A state in the DC input on this POE power. normal (1), underLimit (2), aboveLimit (3), lackPhrase (4), fuseBroken (5), switchOff (6), otherError (7)." ::= { hpnicfPOEInCurStateObjects 2 } hpnicfPOEInCurBState OBJECT-TYPE SYNTAX ACAlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "The current B state in the DC input on this POE power. The value of this node will be one of the following values: normal (1), underLimit (2), aboveLimit (3), lackPhrase (4), fuseBroken (5), switchOff (6), otherError (7)." ::= { hpnicfPOEInCurStateObjects 3 } hpnicfPOEInCurCState OBJECT-TYPE SYNTAX ACAlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "The current C state in the DC input on this POE power. The value of this node will be one of the following values: normal (1), underLimit (2), aboveLimit (3), lackPhrase (4), fuseBroken (5), switchOff (6), otherError (7)." ::= { hpnicfPOEInCurStateObjects 4 } hpnicfPOESwitchStateVolExTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfPOESwitchStateVolExEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "All alarm status of the VOL status. The value of this node will be one of the following values: normal (1), underLimit (2), aboveLimit (3), lackPhrase (4), fuseBroken (5), switchOff (6), otherError (7)." ::= { hpnicfPOEInCurStateObjects 5 } hpnicfPOESwitchStateVolExEntry OBJECT-TYPE SYNTAX HpnicfPOESwitchStateVolExEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The hpnicfPOESwitchStateVolExIndex will match the number of the VOL status." INDEX { hpnicfPOESwitchStateVolExIndex } ::= { hpnicfPOESwitchStateVolExTable 1 } HpnicfPOESwitchStateVolExEntry ::= SEQUENCE { hpnicfPOESwitchStateVolExIndex Integer32, hpnicfPOESwitchStateInVolAB ACAlarmState, hpnicfPOESwitchStateInVolBC ACAlarmState, hpnicfPOESwitchStateInVolCA ACAlarmState } hpnicfPOESwitchStateVolExIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The object species the index of the VOL status. The range of this node is from 1 to hpnicfPOEInCurStateModuleNum." ::= { hpnicfPOESwitchStateVolExEntry 1 } hpnicfPOESwitchStateInVolAB OBJECT-TYPE SYNTAX ACAlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "The object specifies the VOL AB alarm in each VOL status. The value of this node will be one of the following values: normal (1), underLimit (2), aboveLimit (3), lackPhrase (4), fuseBroken (5), switchOff (6), otherError (7)." ::= { hpnicfPOESwitchStateVolExEntry 2 } hpnicfPOESwitchStateInVolBC OBJECT-TYPE SYNTAX ACAlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "The object specifies the VOL BC alarm in each VOL status. The value of this node will be one of the following values: normal (1), underLimit (2), aboveLimit (3), lackPhrase (4), fuseBroken (5), switchOff (6), otherError (7)." ::= { hpnicfPOESwitchStateVolExEntry 3 } hpnicfPOESwitchStateInVolCA OBJECT-TYPE SYNTAX ACAlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "The object specifies the VOL CA alarm in each VOL status. The value of this node will be one of the following values: normal (1), underLimit (2), aboveLimit (3), lackPhrase (4), fuseBroken (5), switchOff (6), otherError (7)." ::= { hpnicfPOESwitchStateVolExEntry 4 } hpnicfPOEAlarmStateObjects OBJECT IDENTIFIER ::= { hpnicfPOEPowerObjects 7 } hpnicfPOEAlarmStateModuleNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The object specifies the number of the power modules in alarm state." ::= { hpnicfPOEAlarmStateObjects 1 } hpnicfPOEAlarmStateInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfPOEAlarmStateInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "All alarm states in the POE power modules." ::= { hpnicfPOEAlarmStateObjects 2 } hpnicfPOEAlarmStateInfoEntry OBJECT-TYPE SYNTAX HpnicfPOEAlarmStateInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The hpnicfPOEAlarmModuleInfoIndex will match the number of the power module." INDEX { hpnicfPOEAlarmModuleInfoIndex } ::= { hpnicfPOEAlarmStateInfoTable 1 } HpnicfPOEAlarmStateInfoEntry ::= SEQUENCE { hpnicfPOEAlarmModuleInfoIndex Integer32, hpnicfPOEModuleDisconnect ModuleAlarmState, hpnicfPOEModuleInputError ModuleAlarmState, hpnicfPOEModuleOutputError ModuleAlarmState, hpnicfPOEModuleOverVoltage ModuleAlarmState, hpnicfPOEModuleOverTemp ModuleAlarmState, hpnicfPOEModuleFanError ModuleAlarmState, hpnicfPOEModuleShutdown ModuleAlarmState, hpnicfPOEModuleCurRestricted ModuleAlarmState } hpnicfPOEAlarmModuleInfoIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The index specifies the index of the HpnicfPOEAlarmStateInfoEntry table. The range of this node is from 1 to hpnicfPOEAlarmStateModuleNum." ::= { hpnicfPOEAlarmStateInfoEntry 1 } hpnicfPOEModuleDisconnect OBJECT-TYPE SYNTAX ModuleAlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "The node specifies the alarm state: The module does not link. The value of this node is one of the following values: normal (1), alarm (2)." ::= { hpnicfPOEAlarmStateInfoEntry 2 } hpnicfPOEModuleInputError OBJECT-TYPE SYNTAX ModuleAlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "The node specifies the alarm state: Input error. The value of this node is one of the following values: normal (1), alarm (2)." ::= { hpnicfPOEAlarmStateInfoEntry 3 } hpnicfPOEModuleOutputError OBJECT-TYPE SYNTAX ModuleAlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "The node specifies the alarm state: Output error. The value of this node is one of the following values: normal (1), alarm (2)." ::= { hpnicfPOEAlarmStateInfoEntry 4 } hpnicfPOEModuleOverVoltage OBJECT-TYPE SYNTAX ModuleAlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "The node specifies the alarm state: The voltage is too high. The value of this node is one of the following values: normal (1), alarm (2)." ::= { hpnicfPOEAlarmStateInfoEntry 5 } hpnicfPOEModuleOverTemp OBJECT-TYPE SYNTAX ModuleAlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "The node specifies the alarm state: The temperature is too high. The value of this node is one of the following values: normal (1), alarm (2)." ::= { hpnicfPOEAlarmStateInfoEntry 6 } hpnicfPOEModuleFanError OBJECT-TYPE SYNTAX ModuleAlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "The node specifies the alarm state: The fan error. The value of this node is one of the following values: normal (1), alarm (2)." ::= { hpnicfPOEAlarmStateInfoEntry 7 } hpnicfPOEModuleShutdown OBJECT-TYPE SYNTAX ModuleAlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "The node specifies the alarm state: The module is shutdown. The value of this node is one of the following values: normal (1), alarm (2)." ::= { hpnicfPOEAlarmStateInfoEntry 8 } hpnicfPOEModuleCurRestricted OBJECT-TYPE SYNTAX ModuleAlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "The node specifies the alarm state: The module limit the current. The value of this node is one of the following values: normal (1), alarm (2)." ::= { hpnicfPOEAlarmStateInfoEntry 9 } END