-- ================================================================== -- Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P. -- -- Description: MAC management MIB -- Reference: -- Version: V2.3 -- History: --(1) Created by Zhangshilin, 2001.06.29 -- V2.0 2004-10-12 updated by gaolong -- Import TEXTUAL-CONVENTION and MODULE-IDENTITY. -- Add hpnicfLswMacPort MODULE-IDENTITY clause. -- Change ACCESS to MAX-ACCESS. -- Change MAX-ACCESS clause value from write-only to read-write. -- V2.1 2005-03-16 by gaolong -- Change import clause of hpnicfdot1qVlanIndex -- V2.2 2005-07-28 by huna kf0518 -- Add hpnicfdot1qTpFdbGroupSetTable -- V2.3 2005-02-25 by wangyupeng -- Add blackhole and security for hpnicfdot1qTpFdbSetStatus -- ================================================================== -- ================================================================== -- -- Varibles and types be imported -- -- ================================================================== HPN-ICF-LswMAM-MIB DEFINITIONS ::= BEGIN IMPORTS MacAddress, TEXTUAL-CONVENTION FROM SNMPv2-TC OBJECT-TYPE,Integer32, MODULE-IDENTITY FROM SNMPv2-SMI hpnicflswCommon FROM HPN-ICF-OID-MIB hpnicfdot1qVlanIndex FROM HPN-ICF-LswVLAN-MIB; hpnicfLswMacPort MODULE-IDENTITY LAST-UPDATED "200106290000Z" ORGANIZATION "" CONTACT-INFO "" DESCRIPTION " " REVISION "200106290000Z" DESCRIPTION " " ::= { hpnicflswCommon 3 } InterfaceIndex ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub- layer must remain constant at least from one re- initialization of the entity's network management system to the next re-initialization." SYNTAX Integer32 PortList ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'." SYNTAX OCTET STRING -- ================================================================== -- -- ======================= definition begin ========================= -- -- ================================================================== hpnicfdot1qMacSearchTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot1qMacSearchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information table for searching port with mac address " ::= { hpnicfLswMacPort 1 } hpnicfdot1qMacSearchEntry OBJECT-TYPE SYNTAX HpnicfDot1qMacSearchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Information table for searching port with mac address entry " INDEX { hpnicfdot1qMacSearchAddress, hpnicfdot1qMacSearchVlanID } ::= { hpnicfdot1qMacSearchTable 1 } HpnicfDot1qMacSearchEntry ::= SEQUENCE { hpnicfdot1qMacSearchAddress MacAddress , hpnicfdot1qMacSearchVlanID INTEGER , hpnicfdot1qMacSearchPort InterfaceIndex , hpnicfdot1qMacSearchAgeTime INTEGER } hpnicfdot1qMacSearchAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address" ::= { hpnicfdot1qMacSearchEntry 1 } hpnicfdot1qMacSearchVlanID OBJECT-TYPE SYNTAX INTEGER (-1 | 1..4096) MAX-ACCESS read-only STATUS current DESCRIPTION " VLANID of the native VLAN of the MAC address to be searched for " ::= { hpnicfdot1qMacSearchEntry 2 } hpnicfdot1qMacSearchPort OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Interface index corresponding to the MAC address" ::= { hpnicfdot1qMacSearchEntry 3 } hpnicfdot1qMacSearchAgeTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " Address aging time" ::= { hpnicfdot1qMacSearchEntry 4 } hpnicfdot1qTpFdbSetTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot1qTpFdbSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unicast address setting table " ::= { hpnicfLswMacPort 2 } hpnicfdot1qTpFdbSetEntry OBJECT-TYPE SYNTAX HpnicfDot1qTpFdbSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Unicast address setting table entry " INDEX { hpnicfdot1qVlanIndex, hpnicfdot1qTpFdbSetAddress } ::= { hpnicfdot1qTpFdbSetTable 1 } HpnicfDot1qTpFdbSetEntry ::= SEQUENCE { hpnicfdot1qTpFdbSetAddress MacAddress , hpnicfdot1qTpFdbSetPort InterfaceIndex , hpnicfdot1qTpFdbSetStatus INTEGER, hpnicfdot1qTpFdbSetOperate INTEGER } hpnicfdot1qTpFdbSetAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unicast MAC address " ::= { hpnicfdot1qTpFdbSetEntry 1 } hpnicfdot1qTpFdbSetPort OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Interface index corresponding to the MAC address " ::= { hpnicfdot1qTpFdbSetEntry 2 } hpnicfdot1qTpFdbSetStatus OBJECT-TYPE SYNTAX INTEGER { other(1), learned(3), static(6), dynamic(7), blackhole(9), security(11) } MAX-ACCESS read-write STATUS current DESCRIPTION "State corresponding to the MAC address" ::= { hpnicfdot1qTpFdbSetEntry 3 } hpnicfdot1qTpFdbSetOperate OBJECT-TYPE SYNTAX INTEGER { add(1), delete(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Add or delete an MAC address. Read operation not supported." ::= { hpnicfdot1qTpFdbSetEntry 4 } hpnicfdot1qTpFdbGroupSetTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot1qTpFdbGroupSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Multistcast address setting table, whose maximal row number is dynamically changed by the influence of IGSP. When reaching the upper limit of the table, no more row could be added, then an error will be returned." ::= { hpnicfLswMacPort 3 } hpnicfdot1qTpFdbGroupSetEntry OBJECT-TYPE SYNTAX HpnicfDot1qTpFdbGroupSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Multicast address setting table entry." INDEX { hpnicfdot1qVlanIndex, hpnicfdot1qTpFdbGroupSetAddress } ::= { hpnicfdot1qTpFdbGroupSetTable 1 } HpnicfDot1qTpFdbGroupSetEntry ::= SEQUENCE { hpnicfdot1qTpFdbGroupSetAddress MacAddress, hpnicfdot1qTpFdbGroupSetPort PortList, hpnicfdot1qTpFdbGroupSetOperate INTEGER } hpnicfdot1qTpFdbGroupSetAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Multicast MAC address." ::= { hpnicfdot1qTpFdbGroupSetEntry 1 } hpnicfdot1qTpFdbGroupSetPort OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "The complete set of ports, in this VLAN, to which frames destined to this Multicast MAC address are currently being explicitly forwarded. This does not include ports for which this address is only implicitly forwarded." ::= { hpnicfdot1qTpFdbGroupSetEntry 2 } hpnicfdot1qTpFdbGroupSetOperate OBJECT-TYPE SYNTAX INTEGER { add(1), delete(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Add or delete a Multicast MAC address. Read operation is meaningless. When adding a Multicast MAC address, it is required to provide MacAddress, VLAN and PortList all. For deleting operation, MacAddress and VLAN must be provided, but hpnicfdot1qTpFdbGroupSetPort is optional." ::= { hpnicfdot1qTpFdbGroupSetEntry 3 } END