-- ================================================================== -- Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P. -- -- Description: Igmp snooping MIB -- Reference: -- Version: V1.4 -- History: --(1) Created by Zhangshilin, 2001.06.29 --(2) Revised by Qi Zhenglin, 2002.1.8 -- V1.1 2004-10-12 updated by gaolong -- Import TEXTUAL-CONVENTION. -- Relocate hpnicfLswIgmpsnoopingMib MODULE-IDENTITY clause. -- V1.2 Revised by yaochunyan, 2004.11.28 -- V1.2 Add hpnicfIgmpSnoopingGroupLimitTable, -- hpnicfIgmpSnoopingFastLeaveTable and -- hpnicfIgmpSnoopingGroupPolicyTable. -- Adjust format of the whole file by gaolong. -- V1.3 2005-3-9 updated by fuzhenyu -- Add object hpnicfIgmpSnoopingNonFloodingStatus. -- Change the descriptions of hpnicfIgmpSnoopingGroupIfIndex, -- hpnicfIgmpSnoopingFastLeaveIfIndex, hpnicfIgmpSnoopingGroupPolicyIfIndex -- V1.4 2005-3-22 updated by wangxiaodong -- Add hpnicfIgmpSnoopingVlanStatusTable -- Add hpnicfRecvIGMPGQueryNum, hpnicfRecvIGMPSQueryNum, -- hpnicfRecvIGMPV1ReportNum, hpnicfRecvIGMPV2ReportNum, -- hpnicfRecvIGMPLeaveNum, hpnicfRecvErrorIGMPPacketNum, -- hpnicfSentIGMPSQueryNum, hpnicfIgmpSnoopingClearStats -- Adjust file format -- ================================================================== -- -- ================================================================== -- -- Varibles and types be imported -- -- ================================================================== HPN-ICF-LswIGSP-MIB DEFINITIONS ::= BEGIN IMPORTS Integer32,MODULE-IDENTITY,OBJECT-TYPE,Unsigned32,Counter32 FROM SNMPv2-SMI TEXTUAL-CONVENTION,RowStatus FROM SNMPv2-TC hpnicflswCommon FROM HPN-ICF-OID-MIB InterfaceIndex FROM IF-MIB; hpnicfLswIgmpsnoopingMib MODULE-IDENTITY LAST-UPDATED "200106290000Z" ORGANIZATION "" CONTACT-INFO "" DESCRIPTION "" REVISION "200106290000Z" DESCRIPTION "" ::= { hpnicflswCommon 7 } EnabledStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A simple status value for the object." SYNTAX INTEGER { enabled(1), disabled(2) } -- ================================================================== -- -- ======================= definition begin ========================= -- -- ================================================================== hpnicfLswIgmpsnoopingMibObject OBJECT IDENTIFIER ::= { hpnicfLswIgmpsnoopingMib 1 } hpnicfIgmpSnoopingStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Configure to enable IGMP Snooping." ::= { hpnicfLswIgmpsnoopingMibObject 1 } hpnicfIgmpSnoopingRouterPortAge OBJECT-TYPE SYNTAX INTEGER (1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the aging time of the router port." DEFVAL {105} ::= { hpnicfLswIgmpsnoopingMibObject 2 } hpnicfIgmpSnoopingResponseTime OBJECT-TYPE SYNTAX INTEGER (1..25) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the maximum query response time." DEFVAL {10} ::= { hpnicfLswIgmpsnoopingMibObject 3 } hpnicfIgmpSnoopingHostTime OBJECT-TYPE SYNTAX INTEGER (200..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the aging time of the multicast group port." DEFVAL {260} ::= { hpnicfLswIgmpsnoopingMibObject 4 } hpnicfIgmpSnoopingGroupLimitTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfIgmpSnoopingGroupLimitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table lists the maximum group number that one interface could do IGMP Snooping." ::= { hpnicfLswIgmpsnoopingMibObject 5 } hpnicfIgmpSnoopingGroupLimitEntry OBJECT-TYPE SYNTAX HpnicfIgmpSnoopingGroupLimitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) representing the maximum group number on an interface which IGMP Snooping operation is enabled." INDEX { hpnicfIgmpSnoopingGroupIfIndex } ::= { hpnicfIgmpSnoopingGroupLimitTable 1 } HpnicfIgmpSnoopingGroupLimitEntry ::= SEQUENCE { hpnicfIgmpSnoopingGroupIfIndex InterfaceIndex, hpnicfIgmpSnoopingGroupLimitNumber Unsigned32 } hpnicfIgmpSnoopingGroupIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of the port on which IGMP snooping is enabled." ::= { hpnicfIgmpSnoopingGroupLimitEntry 1 } hpnicfIgmpSnoopingGroupLimitNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maxmum group number of IGMP Snooping on a port." DEFVAL { 4294967295 } ::= { hpnicfIgmpSnoopingGroupLimitEntry 2 } hpnicfIgmpSnoopingFastLeaveTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfIgmpSnoopingFastLeaveEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table specifies the fast leave status on those ports that do IGMP Snooping." ::= { hpnicfLswIgmpsnoopingMibObject 6 } hpnicfIgmpSnoopingFastLeaveEntry OBJECT-TYPE SYNTAX HpnicfIgmpSnoopingFastLeaveEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry specifies the fast leave status on those ports that do IGMP Snooping." INDEX { hpnicfIgmpSnoopingFastLeaveIfIndex } ::= { hpnicfIgmpSnoopingFastLeaveTable 1 } HpnicfIgmpSnoopingFastLeaveEntry ::= SEQUENCE { hpnicfIgmpSnoopingFastLeaveIfIndex InterfaceIndex, hpnicfIgmpSnoopingFastLeaveStatus EnabledStatus } hpnicfIgmpSnoopingFastLeaveIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of the port on which IGMP snooping is enabled." ::= { hpnicfIgmpSnoopingFastLeaveEntry 1 } hpnicfIgmpSnoopingFastLeaveStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The fast leave status of the port on which IGMP Snooping is enabled." DEFVAL { 2 } ::= { hpnicfIgmpSnoopingFastLeaveEntry 2 } hpnicfIgmpSnoopingGroupPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfIgmpSnoopingGroupPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table specifies the group policy parameter and Vlan ID of the IGMP Snooping port." ::= { hpnicfLswIgmpsnoopingMibObject 7 } hpnicfIgmpSnoopingGroupPolicyEntry OBJECT-TYPE SYNTAX HpnicfIgmpSnoopingGroupPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry representing the group policy parameter and Vlan ID of a port on which IGMP Snooping operation is enabled." INDEX { hpnicfIgmpSnoopingGroupPolicyIfIndex, hpnicfIgmpSnoopingGroupPolicyVlanID } ::= { hpnicfIgmpSnoopingGroupPolicyTable 1 } HpnicfIgmpSnoopingGroupPolicyEntry ::= SEQUENCE { hpnicfIgmpSnoopingGroupPolicyIfIndex InterfaceIndex, hpnicfIgmpSnoopingGroupPolicyVlanID Integer32, hpnicfIgmpSnoopingGroupPolicyParameter Integer32, hpnicfIgmpSnoopingGroupPolicyStatus RowStatus } hpnicfIgmpSnoopingGroupPolicyIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of the port on which IGMP Snooping is enabled." ::= { hpnicfIgmpSnoopingGroupPolicyEntry 1 } hpnicfIgmpSnoopingGroupPolicyVlanID OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Vlan ID which the IGMP Snooping port is attached to." ::= { hpnicfIgmpSnoopingGroupPolicyEntry 2 } hpnicfIgmpSnoopingGroupPolicyParameter OBJECT-TYPE SYNTAX Integer32(2000..2999) MAX-ACCESS read-create STATUS current DESCRIPTION "The ACL Number which is used as the group policy parameter of the IGMP Snooping port." ::= { hpnicfIgmpSnoopingGroupPolicyEntry 3 } hpnicfIgmpSnoopingGroupPolicyStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create or delete a row and represent the current status of this row. Now support three state:CreateAndGo,Active,Destroy." ::= { hpnicfIgmpSnoopingGroupPolicyEntry 4 } hpnicfIgmpSnoopingNonFloodingStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Configure to disable multicast flooding when no member exists in the destinated group. To use this function,IGMP snooping must be enabled." ::= { hpnicfLswIgmpsnoopingMibObject 8 } hpnicfIgmpSnoopingVlanStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfIgmpSnoopingVlanStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table used to enable or disable IGMP snooping on the specified VLAN." ::= { hpnicfLswIgmpsnoopingMibObject 9 } hpnicfIgmpSnoopingVlanStatusEntry OBJECT-TYPE SYNTAX HpnicfIgmpSnoopingVlanStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry representing the IGMP snooping status on the specified VLAN." INDEX { hpnicfIgmpSnoopingVlanID } ::= { hpnicfIgmpSnoopingVlanStatusTable 1 } HpnicfIgmpSnoopingVlanStatusEntry ::= SEQUENCE { hpnicfIgmpSnoopingVlanID Integer32, hpnicfIgmpSnoopingVlanEnabled EnabledStatus } hpnicfIgmpSnoopingVlanID OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index uniquely identifies on which VLAN IGMP snooping is enabled or disabled. " ::= { hpnicfIgmpSnoopingVlanStatusEntry 1 } hpnicfIgmpSnoopingVlanEnabled OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Indicating whether IGMP snooping is enabled on this VLAN." DEFVAL { disabled } ::= { hpnicfIgmpSnoopingVlanStatusEntry 2 } hpnicfIgmpSnoopingStatsObjects OBJECT IDENTIFIER ::= { hpnicfLswIgmpsnoopingMibObject 10 } hpnicfRecvIGMPGQueryNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The statistics of IGMP general query packets received on the device." ::= { hpnicfIgmpSnoopingStatsObjects 1 } hpnicfRecvIGMPSQueryNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The statistics of IGMP specific query packets received on the device." ::= { hpnicfIgmpSnoopingStatsObjects 2 } hpnicfRecvIGMPV1ReportNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The statistics of IGMP V1 report packets received on the device." ::= { hpnicfIgmpSnoopingStatsObjects 3 } hpnicfRecvIGMPV2ReportNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The statistics of IGMP V2 report packets received on the device." ::= { hpnicfIgmpSnoopingStatsObjects 4 } hpnicfRecvIGMPLeaveNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The statistics of IGMP leave packets received on the device." ::= { hpnicfIgmpSnoopingStatsObjects 5 } hpnicfRecvErrorIGMPPacketNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The statistics of error IGMP packets received on the device." ::= { hpnicfIgmpSnoopingStatsObjects 6 } hpnicfSentIGMPSQueryNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The statistics of IGMP specific query packets sent from the device." ::= { hpnicfIgmpSnoopingStatsObjects 7 } hpnicfIgmpSnoopingClearStats OBJECT-TYPE SYNTAX INTEGER { clear(1), counting(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The configuration to clear the statistics of IGMP packets." DEFVAL { counting } ::= { hpnicfIgmpSnoopingStatsObjects 8 } END