-- ============================================================================= -- Copyright (c) 2010-2014 Hewlett-Packard Development Company, L.P. -- -- Description: -- The file defines a MIB to provide MESH configuration information. -- Reference: -- Version: V1.3 -- History: -- V1.0 2008-07-08 Initial version, created by ChangHuifeng -- V1.1 2008-11-07 modified by liyugang -- Add hpnicfDot11sMeshLinkStatisTable, hpnicfDot11sMeshNbrStatusTable -- to hpnicfDot11sMeshStatusGroup -- V1.2 2009-08-01 modified by Wang Shaojie -- Add hpnicfDot11sMeshLinkIFName to hpnicfDot11sMeshLinkStatisTable. -- V1.3 2013-09-14 modified by Zhang Siyu -- Add hpnicfDot11sMeshLinkType to hpnicfDot11sMeshLinkStatusTable -- ============================================================================= HPN-ICF-DOT11S-MESH-MIB DEFINITIONS ::= BEGIN IMPORTS TruthValue, MacAddress, RowStatus FROM SNMPv2-TC MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, Counter32 FROM SNMPv2-SMI hpnicfDot11, HpnicfDot11RadioElementIndex, hpnicfDot11APElementIndex FROM HPN-ICF-DOT11-REF-MIB; hpnicfDot11sMesh MODULE-IDENTITY LAST-UPDATED "200908011000Z" -- Nov 07, 2008 at 10:00 GMT ORGANIZATION "" CONTACT-INFO "" DESCRIPTION "The file defines a MIB to provide MESH configuration information. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Fat AP Applied in the home, SOHO and so on, and it could work independently without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associating with the AP. Radio The chip set to receive and send wireless signal. Mesh A network consisting of two or more mesh points which communicate with each other via mesh services. Mesh Point (MP) An IEEE 802.11 entity that contains an IEEE 802.11-conformant medium access control (MAC) and physical layer (PHY) interface to the wireless medium (WM) that supports mesh services. Mesh Access Point (MAP) A mesh point that is collocated with one or more access points. Mesh Portal Point (MPP) A mesh point that is collocated with one or more portals. Mesh Link A link between two MPs." REVISION "200908011000Z" -- Aug 01, 2009 at 10:00 GMT DESCRIPTION "Add new nodes." REVISION "200811071000Z" -- Nov 07, 2008 at 10:00 GMT DESCRIPTION "Modified to add new nodes and a new table." REVISION "200807081800Z" -- July 8, 2008 at 18:00 GMT DESCRIPTION "The initial revision of this MIB module." ::= { hpnicfDot11 11 } -- ***************************************************************************** -- * Major sections -- ***************************************************************************** hpnicfDot11sConfigGroup OBJECT IDENTIFIER ::= { hpnicfDot11sMesh 1 } -- Dot11s Configuration Group has the following children: -- hpnicfDot11sMeshGlobalPara ::= { hpnicfDot11sConfigGroup 1 } -- hpnicfDot11sMeshPflTable ::= { hpnicfDot11sConfigGroup 2 } -- hpnicfDot11sMpPlcyTable ::= { hpnicfDot11sConfigGroup 3 } -- hpnicfDot11sMlspCfgTable ::= { hpnicfDot11sConfigGroup 4 } -- hpnicfDot11sRadioCfgTable ::= { hpnicfDot11sConfigGroup 5 } -- hpnicfDot11sAPCfgTable ::= { hpnicfDot11sConfigGroup 6 } hpnicfDot11sWDSConfigGroup OBJECT IDENTIFIER ::= { hpnicfDot11sMesh 2 } -- Dot11s WDS Configuration Group has the following children: -- hpnicfDot11sWDSPeerMacTable ::= { hpnicfDot11sWDSConfigGroup 1 } hpnicfDot11sMeshStatusGroup OBJECT IDENTIFIER ::= { hpnicfDot11sMesh 3 } -- Dot11s Mesh Status Group has the following children: -- hpnicfDot11sMeshLinkStatusTable ::= { hpnicfDot11sMeshStatusGroup 1 } -- hpnicfDot11sMeshLinkStatisTable ::= { hpnicfDot11sMeshStatusGroup 2 } -- hpnicfDot11sMeshNbrStatusTable ::= { hpnicfDot11sMeshStatusGroup 3 } -- ***************************************************************************** -- * hpnicfDot11sMeshGlobalPara Definition -- ***************************************************************************** hpnicfDot11sMeshGlobalPara OBJECT IDENTIFIER ::= { hpnicfDot11sConfigGroup 1 } hpnicfDot11sMeshMkdID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the mesh key distributor identifier (MKD-ID). If the MKD-ID is not configured, the value is '00:00:00:00:00:00'." ::= { hpnicfDot11sMeshGlobalPara 1 } -- ***************************************************************************** -- * End of hpnicfDot11sMeshGlobalPara Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11sMeshPflTable Definition -- ***************************************************************************** hpnicfDot11sMeshPflTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11sMeshPflEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure mesh profile. A mesh profile is created and mapped to a MP so that it can provide mesh services to other MPs which have the same mesh ID. When the mesh profile is enabled, all of the object in this table can not be modified except hpnicfDot11sMeshPflEnable. The mesh profile can not be deleted when it is bound with the radio." ::= { hpnicfDot11sConfigGroup 2 } hpnicfDot11sMeshPflEntry OBJECT-TYPE SYNTAX HpnicfDot11sMeshPflEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information of a mesh profile." INDEX { hpnicfDot11sMeshPflIndex } ::= { hpnicfDot11sMeshPflTable 1 } HpnicfDot11sMeshPflEntry ::= SEQUENCE { hpnicfDot11sMeshPflIndex Integer32, hpnicfDot11sMeshPflMeshID OCTET STRING, hpnicfDot11sMeshPflBindIntNum Integer32, hpnicfDot11sMeshPflKeepAlive Integer32, hpnicfDot11sMeshPflBackhaulRate Integer32, hpnicfDot11sMeshMkdServEnable TruthValue, hpnicfDot11sMeshPflEnable TruthValue, hpnicfDot11sMeshPflRowStatus RowStatus } hpnicfDot11sMeshPflIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the index of the mesh profile." ::= { hpnicfDot11sMeshPflEntry 1 } hpnicfDot11sMeshPflMeshID OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the mesh ID of the mesh profile. The string length of this object is zero when the mesh ID is not configured. If the mesh ID is not configured, hpnicfDot11sMeshPflEnable can not be set to 'true'." ::= { hpnicfDot11sMeshPflEntry 2 } hpnicfDot11sMeshPflBindIntNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the specified mesh interface number binding to the mesh profile. If the value is set to -1, the binding will be removed. If the mesh interface is not specified, the value of hpnicfDot11sMeshPflEnable can not be set to 'true'." DEFVAL { -1 } ::= { hpnicfDot11sMeshPflEntry 3 } hpnicfDot11sMeshPflKeepAlive OBJECT-TYPE SYNTAX Integer32(1..1800) UNITS "second" MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the mesh link keep-alive interval." ::= { hpnicfDot11sMeshPflEntry 4 } hpnicfDot11sMeshPflBackhaulRate OBJECT-TYPE SYNTAX Integer32 UNITS "Kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the link backhaul rate." ::= { hpnicfDot11sMeshPflEntry 5 } hpnicfDot11sMeshMkdServEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether the mesh key distributor (MKD) service for the mesh profile is enabled. 'true': The MKD service for the mesh profile is enabled. 'false': The MKD service for the mesh profile is disabled." DEFVAL { false } ::= { hpnicfDot11sMeshPflEntry 6 } hpnicfDot11sMeshPflEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether the mesh profile is enabled. 'true': The mesh profile is enabled. 'false': The mesh profile is disabled." DEFVAL { false } ::= { hpnicfDot11sMeshPflEntry 7 } hpnicfDot11sMeshPflRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { hpnicfDot11sMeshPflEntry 8 } -- ***************************************************************************** -- * End of hpnicfDot11sMeshPflTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11sMpPlcyTable Definition -- ***************************************************************************** hpnicfDot11sMpPlcyTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11sMpPlcyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure MP policy. There is 'default_mp_plcy' on system by default and its index is 1. The 'default_mp_plcy' can not be deleted or modified. The MP policy can not be deleted when it is applied to a radio. It can not be modified when it is applied to an enabled radio." ::= { hpnicfDot11sConfigGroup 3 } hpnicfDot11sMpPlcyEntry OBJECT-TYPE SYNTAX HpnicfDot11sMpPlcyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information of a MP policy." INDEX { hpnicfDot11sMpPlcyIndex } ::= { hpnicfDot11sMpPlcyTable 1 } HpnicfDot11sMpPlcyEntry ::= SEQUENCE { hpnicfDot11sMpPlcyIndex Integer32, hpnicfDot11sMpPlcyName OCTET STRING, hpnicfDot11sMpPlcyInitEnable TruthValue, hpnicfDot11sMlspEnable TruthValue, hpnicfDot11sProbReqInterval Integer32, hpnicfDot11sRoleAuthEnable TruthValue, hpnicfDot11sLinkHoldRSSI Integer32, hpnicfDot11sLinkHoldTime Integer32, hpnicfDot11sSwitchMargin Integer32, hpnicfDot11sLinkSaturationRSSI Integer32, hpnicfDot11sLinkRateMode INTEGER, hpnicfDot11sMaxLinkNum Integer32, hpnicfDot11sMpPlcyRowStatus RowStatus } hpnicfDot11sMpPlcyIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the MP policy index." ::= { hpnicfDot11sMpPlcyEntry 1 } hpnicfDot11sMpPlcyName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..15)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the MP policy name. MP policy can not be created with name 'a', 'al', 'all' or 'default_mp_plcy'. Modification is not supported." ::= { hpnicfDot11sMpPlcyEntry 2 } hpnicfDot11sMpPlcyInitEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether the link initiation for the MP policy is enabled. 'true': The link initiation for the MP policy is enabled. 'false': The link initiation for the MP policy is disabled." DEFVAL { true } ::= { hpnicfDot11sMpPlcyEntry 3 } hpnicfDot11sMlspEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether the mesh link switch protocol (MLSP) is enabled. 'true': MLSP is enabled. 'false': MLSP is disabled." DEFVAL { false } ::= { hpnicfDot11sMpPlcyEntry 4 } hpnicfDot11sProbReqInterval OBJECT-TYPE SYNTAX Integer32 UNITS "millisecond" MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the probe request interval." ::= { hpnicfDot11sMpPlcyEntry 5 } hpnicfDot11sRoleAuthEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether the device can play as the role of an authenticator." DEFVAL { true } ::= { hpnicfDot11sMpPlcyEntry 6 } hpnicfDot11sLinkHoldRSSI OBJECT-TYPE SYNTAX Integer32(5..100) UNITS "dBm" MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the link-hold receive signal strength indicator (RSSI)." ::= { hpnicfDot11sMpPlcyEntry 7 } hpnicfDot11sLinkHoldTime OBJECT-TYPE SYNTAX Integer32(1000..20000) UNITS "millisecond" MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the link-hold time." ::= { hpnicfDot11sMpPlcyEntry 8 } hpnicfDot11sSwitchMargin OBJECT-TYPE SYNTAX Integer32(1..100) UNITS "dBm" MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the link-switch margin." ::= { hpnicfDot11sMpPlcyEntry 9 } hpnicfDot11sLinkSaturationRSSI OBJECT-TYPE SYNTAX Integer32(30..150) UNITS "dBm" MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the link saturation receive signal strength indicator (RSSI)." ::= { hpnicfDot11sMpPlcyEntry 10 } hpnicfDot11sLinkRateMode OBJECT-TYPE SYNTAX INTEGER { fixed(1), realtime(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the rate mode of the mesh link." DEFVAL { fixed } ::= { hpnicfDot11sMpPlcyEntry 11 } hpnicfDot11sMaxLinkNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the maximum number of the mesh link." ::= { hpnicfDot11sMpPlcyEntry 12 } hpnicfDot11sMpPlcyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { hpnicfDot11sMpPlcyEntry 13 } -- ***************************************************************************** -- * End of hpnicfDot11sMpPlcyTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11sMlspCfgTable Definition -- ***************************************************************************** hpnicfDot11sMlspCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11sMlspCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure MLSP proxy MAC address. Only if the specified MP policy is modifiable and the MLSP is enabled, the row of this table can be created and deleted. The row of this table can not be modified." ::= { hpnicfDot11sConfigGroup 4 } hpnicfDot11sMlspCfgEntry OBJECT-TYPE SYNTAX HpnicfDot11sMlspCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information of MLSP proxy MAC address." INDEX { hpnicfDot11sMpPlcyIndex, hpnicfDot11sMlspProxyIndex } ::= { hpnicfDot11sMlspCfgTable 1 } HpnicfDot11sMlspCfgEntry ::= SEQUENCE { hpnicfDot11sMlspProxyIndex Integer32, hpnicfDot11sMlspProxyMac MacAddress, hpnicfDot11sMlspRowStatus RowStatus } hpnicfDot11sMlspProxyIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the MLSP proxy MAC address index." ::= { hpnicfDot11sMlspCfgEntry 1 } hpnicfDot11sMlspProxyMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the MLSP proxy MAC address." ::= { hpnicfDot11sMlspCfgEntry 2 } hpnicfDot11sMlspRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { hpnicfDot11sMlspCfgEntry 3 } -- ***************************************************************************** -- * End of hpnicfDot11sMlspCfgTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11sRadioCfgTable Definition -- ***************************************************************************** hpnicfDot11sRadioCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11sRadioCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure mesh to the specified radio." ::= { hpnicfDot11sConfigGroup 5 } hpnicfDot11sRadioCfgEntry OBJECT-TYPE SYNTAX HpnicfDot11sRadioCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains mesh configure information of the specified radio." INDEX { hpnicfDot11sCfgRadioIndex } ::= { hpnicfDot11sRadioCfgTable 1 } HpnicfDot11sRadioCfgEntry ::= SEQUENCE { hpnicfDot11sCfgRadioIndex HpnicfDot11RadioElementIndex, hpnicfDot11sMeshPflMap Integer32, hpnicfDot11sMpPlcyMap Integer32 } hpnicfDot11sCfgRadioIndex OBJECT-TYPE SYNTAX HpnicfDot11RadioElementIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents index of the radio." ::= { hpnicfDot11sRadioCfgEntry 1 } hpnicfDot11sMeshPflMap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the number of the mesh profile mapped to the specified radio. The value is zero when the radio is not binding mesh profile." DEFVAL { 0 } ::= { hpnicfDot11sRadioCfgEntry 2 } hpnicfDot11sMpPlcyMap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the index of the MP policy mapped to the specified radio. The MP policy is 'default_mp_plcy' when the radio is not binding user-defined MP policy. The index of 'default_mp_plcy' is 1. This object can not be modified when the radio is enabled." DEFVAL { 1 } ::= { hpnicfDot11sRadioCfgEntry 3 } -- ***************************************************************************** -- * End of hpnicfDot11sRadioCfgTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11sAPCfgTable Definition -- ***************************************************************************** hpnicfDot11sAPCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11sAPCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure mesh to the specified AP." ::= { hpnicfDot11sConfigGroup 6 } hpnicfDot11sAPCfgEntry OBJECT-TYPE SYNTAX HpnicfDot11sAPCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains mesh configure information of the specified AP." INDEX { hpnicfDot11APElementIndex } ::= { hpnicfDot11sAPCfgTable 1 } HpnicfDot11sAPCfgEntry ::= SEQUENCE { hpnicfDot11sPortalEnable TruthValue } hpnicfDot11sPortalEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether the portal service is enabled. 'true': The portal service is enabled. 'false': The portal service is disabled." DEFVAL { false } ::= { hpnicfDot11sAPCfgEntry 1 } -- ***************************************************************************** -- * End of hpnicfDot11sAPCfgTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11sWDSPeerMacTable Definition -- ***************************************************************************** hpnicfDot11sWDSPeerMacTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11sWDSPeerMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure wireless distribution system (WDS). The row of this table can not be modified." ::= { hpnicfDot11sWDSConfigGroup 1 } hpnicfDot11sWDSPeerMacEntry OBJECT-TYPE SYNTAX HpnicfDot11sWDSPeerMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information of WDS." INDEX { hpnicfDot11sCfgRadioIndex, hpnicfDot11sWDSPeerMacIndex } ::= { hpnicfDot11sWDSPeerMacTable 1 } HpnicfDot11sWDSPeerMacEntry ::= SEQUENCE { hpnicfDot11sWDSPeerMacIndex Integer32, hpnicfDot11sWDSPeerMacAddrss MacAddress, hpnicfDot11sWDSPeerMacRowStatus RowStatus } hpnicfDot11sWDSPeerMacIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the peer MAC address index." ::= { hpnicfDot11sWDSPeerMacEntry 1 } hpnicfDot11sWDSPeerMacAddrss OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the peer MAC address." ::= { hpnicfDot11sWDSPeerMacEntry 2 } hpnicfDot11sWDSPeerMacRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { hpnicfDot11sWDSPeerMacEntry 3 } -- ***************************************************************************** -- * End of hpnicfDot11sWDSPeerMacTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11sMeshLinkStatusTable Definition -- ***************************************************************************** hpnicfDot11sMeshLinkStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11sMeshLinkStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to represent the status of mesh link." ::= { hpnicfDot11sMeshStatusGroup 1 } hpnicfDot11sMeshLinkStatusEntry OBJECT-TYPE SYNTAX HpnicfDot11sMeshLinkStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains status information of mesh link." INDEX { hpnicfDot11sMeshLinkIfIndex } ::= { hpnicfDot11sMeshLinkStatusTable 1 } HpnicfDot11sMeshLinkStatusEntry ::= SEQUENCE { hpnicfDot11sMeshLinkIfIndex Unsigned32, hpnicfDot11sMeshLinkName OCTET STRING, hpnicfDot11sMeshLinkBSSID MacAddress, hpnicfDot11sMeshLinkPeerMac MacAddress, hpnicfDot11sMeshLinkExistDuration Integer32, hpnicfDot11sMeshLinkType INTEGER } hpnicfDot11sMeshLinkIfIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the interface index of the mesh link." ::= { hpnicfDot11sMeshLinkStatusEntry 1 } hpnicfDot11sMeshLinkName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the name of the mesh link." ::= { hpnicfDot11sMeshLinkStatusEntry 2 } hpnicfDot11sMeshLinkBSSID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the BSS ID of the mesh link." ::= { hpnicfDot11sMeshLinkStatusEntry 3 } hpnicfDot11sMeshLinkPeerMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the peer MAC address of the mesh link." ::= { hpnicfDot11sMeshLinkStatusEntry 4 } hpnicfDot11sMeshLinkExistDuration OBJECT-TYPE SYNTAX Integer32 UNITS "second" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the time for which the link has been up." ::= { hpnicfDot11sMeshLinkStatusEntry 5 } hpnicfDot11sMeshLinkType OBJECT-TYPE SYNTAX INTEGER { active(1), dormant(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the type for the link." ::= { hpnicfDot11sMeshLinkStatusEntry 6 } -- ***************************************************************************** -- * End of hpnicfDot11sMeshLinkStatusTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11sMeshLinkStatisTable Definition -- ***************************************************************************** hpnicfDot11sMeshLinkStatisTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11sMeshLinkStatisEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to represent the statistical information of mesh link." ::= { hpnicfDot11sMeshStatusGroup 2 } hpnicfDot11sMeshLinkStatisEntry OBJECT-TYPE SYNTAX HpnicfDot11sMeshLinkStatisEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains statistical information of mesh link." INDEX { hpnicfDot11APElementIndex, hpnicfDot11sMeshLinkStatIfIndex } ::= { hpnicfDot11sMeshLinkStatisTable 1 } HpnicfDot11sMeshLinkStatisEntry ::= SEQUENCE { hpnicfDot11sMeshLinkStatIfIndex Unsigned32, hpnicfDot11sMeshLinkNbrIndex Unsigned32, hpnicfDot11sMeshLinkRxTotByte Counter32, hpnicfDot11sMeshLinkRxTotPkt Counter32, hpnicfDot11sMeshLinkRxUniPkt Counter32, hpnicfDot11sMeshLinkRxBrocPkt Counter32, hpnicfDot11sMeshLinkRxMuticPkt Counter32, hpnicfDot11sMeshLinkRxDiscPkt Counter32, hpnicfDot11sMeshLinkTxTotByte Counter32, hpnicfDot11sMeshLinkTxTotPkt Counter32, hpnicfDot11sMeshLinkTxUniPkt Counter32, hpnicfDot11sMeshLinkTxBrocPkt Counter32, hpnicfDot11sMeshLinkTxMuticPkt Counter32, hpnicfDot11sMeshLinkTxDiscPkt Counter32, hpnicfDot11sMeshLinkIFName OCTET STRING } hpnicfDot11sMeshLinkStatIfIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the interface index of the mesh link." ::= { hpnicfDot11sMeshLinkStatisEntry 1 } hpnicfDot11sMeshLinkNbrIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the neighbor index of the mesh link." ::= { hpnicfDot11sMeshLinkStatisEntry 2 } hpnicfDot11sMeshLinkRxTotByte OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the amount of bytes that the mesh link received." ::= { hpnicfDot11sMeshLinkStatisEntry 3 } hpnicfDot11sMeshLinkRxTotPkt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the amount of packets that the mesh link received." ::= { hpnicfDot11sMeshLinkStatisEntry 4 } hpnicfDot11sMeshLinkRxUniPkt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the amount of unicast packets that the mesh link received." ::= { hpnicfDot11sMeshLinkStatisEntry 5 } hpnicfDot11sMeshLinkRxBrocPkt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the amount of broadcast packets that the mesh link received." ::= { hpnicfDot11sMeshLinkStatisEntry 6 } hpnicfDot11sMeshLinkRxMuticPkt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the amount of multicast packets that the mesh link received." ::= { hpnicfDot11sMeshLinkStatisEntry 7 } hpnicfDot11sMeshLinkRxDiscPkt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the amount of packets that the mesh link discarded." ::= { hpnicfDot11sMeshLinkStatisEntry 8 } hpnicfDot11sMeshLinkTxTotByte OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the total amount of bytes that the mesh link transmitted." ::= { hpnicfDot11sMeshLinkStatisEntry 9 } hpnicfDot11sMeshLinkTxTotPkt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the total amount of packets that the mesh link transmitted." ::= { hpnicfDot11sMeshLinkStatisEntry 10 } hpnicfDot11sMeshLinkTxUniPkt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the amount of unicast packets that the mesh link transmitted." ::= { hpnicfDot11sMeshLinkStatisEntry 11 } hpnicfDot11sMeshLinkTxBrocPkt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the amount of broadcast packets that the mesh link transmitted." ::= { hpnicfDot11sMeshLinkStatisEntry 12 } hpnicfDot11sMeshLinkTxMuticPkt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the amount of multicast packets that the mesh link transmitted." ::= { hpnicfDot11sMeshLinkStatisEntry 13 } hpnicfDot11sMeshLinkTxDiscPkt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the amount of discarded packets that the mesh link transmitted." ::= { hpnicfDot11sMeshLinkStatisEntry 14 } hpnicfDot11sMeshLinkIFName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the name of mesh link interface." ::= { hpnicfDot11sMeshLinkStatisEntry 15 } -- ***************************************************************************** -- * End of hpnicfDot11sMeshLinkStatisTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11sMeshNbrStatusTable Definition -- ***************************************************************************** hpnicfDot11sMeshNbrStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11sMeshNbrStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents the status information for the neighbors of MP." ::= { hpnicfDot11sMeshStatusGroup 3 } hpnicfDot11sMeshNbrStatusEntry OBJECT-TYPE SYNTAX HpnicfDot11sMeshNbrStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry of the table will provide status information for the neighbors of MP." INDEX { hpnicfDot11APElementIndex, hpnicfDot11sMeshNbrIndex } ::= { hpnicfDot11sMeshNbrStatusTable 1 } HpnicfDot11sMeshNbrStatusEntry ::= SEQUENCE { hpnicfDot11sMeshNbrIndex Unsigned32, hpnicfDot11sMeshNbrRadioID Unsigned32, hpnicfDot11sMeshLocalMeshID OCTET STRING, hpnicfDot11sMeshNbrMeshID OCTET STRING, hpnicfDot11sMeshNbrBSSID MacAddress, hpnicfDot11sMeshNbrPeerMac MacAddress, hpnicfDot11sMeshLinkInMp Unsigned32, hpnicfDot11sMeshMPLinkStatus INTEGER, hpnicfDot11sMeshNbrChannel Unsigned32, hpnicfDot11sMeshNbrLinkDuration Integer32, hpnicfDot11sMeshNbrRSSI Integer32, hpnicfDot11sMeshNbrSNR Integer32 } hpnicfDot11sMeshNbrIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the index for the neighbor." ::= { hpnicfDot11sMeshNbrStatusEntry 1 } hpnicfDot11sMeshNbrRadioID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the radio ID of the neighbor." ::= { hpnicfDot11sMeshNbrStatusEntry 2 } hpnicfDot11sMeshLocalMeshID OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the local mesh ID." ::= { hpnicfDot11sMeshNbrStatusEntry 3 } hpnicfDot11sMeshNbrMeshID OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the mesh ID of the neighbor." ::= { hpnicfDot11sMeshNbrStatusEntry 4 } hpnicfDot11sMeshNbrBSSID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the BSS ID of the neighbor." ::= { hpnicfDot11sMeshNbrStatusEntry 5 } hpnicfDot11sMeshNbrPeerMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the MAC address of the peer neighbor." ::= { hpnicfDot11sMeshNbrStatusEntry 6 } hpnicfDot11sMeshLinkInMp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the interface index of mesh link that used to connect with this neighbor." ::= { hpnicfDot11sMeshNbrStatusEntry 7 } hpnicfDot11sMeshMPLinkStatus OBJECT-TYPE SYNTAX INTEGER { processing(1), up(2), down(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the status of mesh link that used to connect with this neighbor." ::= { hpnicfDot11sMeshNbrStatusEntry 8 } hpnicfDot11sMeshNbrChannel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the channel number used by this neighbor." ::= { hpnicfDot11sMeshNbrStatusEntry 9 } hpnicfDot11sMeshNbrLinkDuration OBJECT-TYPE SYNTAX Integer32 UNITS "second" MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the duration of mesh link that used to connect with this neighbor." ::= { hpnicfDot11sMeshNbrStatusEntry 10 } hpnicfDot11sMeshNbrRSSI OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the RSSI of mesh link that used to connect with this neighbor." ::= { hpnicfDot11sMeshNbrStatusEntry 11 } hpnicfDot11sMeshNbrSNR OBJECT-TYPE SYNTAX Integer32 UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the SNR of mesh link that used to connect with this neighbor." ::= { hpnicfDot11sMeshNbrStatusEntry 12 } -- ***************************************************************************** -- * End of hpnicfDot11sMeshNbrStatusTable Definition -- ***************************************************************************** END